summaryrefslogtreecommitdiff
path: root/drivers/isdn/hisax/st5481.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-07-11 20:55:49 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2019-07-11 20:55:49 +0300
commit237f83dfbe668443b5e31c3c7576125871cca674 (patch)
tree11848a8d0aa414a1d3ce2024e181071b1d9dea08 /drivers/isdn/hisax/st5481.h
parent8f6ccf6159aed1f04c6d179f61f6fb2691261e84 (diff)
parent1ff2f0fa450ea4e4f87793d9ed513098ec6e12be (diff)
downloadlinux-237f83dfbe668443b5e31c3c7576125871cca674.tar.xz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
Diffstat (limited to 'drivers/isdn/hisax/st5481.h')
-rw-r--r--drivers/isdn/hisax/st5481.h529
1 files changed, 0 insertions, 529 deletions
diff --git a/drivers/isdn/hisax/st5481.h b/drivers/isdn/hisax/st5481.h
deleted file mode 100644
index b421b86ca7da..000000000000
--- a/drivers/isdn/hisax/st5481.h
+++ /dev/null
@@ -1,529 +0,0 @@
-/*
- * Driver for ST5481 USB ISDN modem
- *
- * Author Frode Isaksen
- * Copyright 2001 by Frode Isaksen <fisaksen@bewan.com>
- * 2001 by Kai Germaschewski <kai.germaschewski@gmx.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- */
-
-#ifndef _ST5481_H_
-#define _ST5481_H_
-
-
-// USB IDs, the Product Id is in the range 0x4810-0x481F
-
-#define ST_VENDOR_ID 0x0483
-#define ST5481_PRODUCT_ID 0x4810
-#define ST5481_PRODUCT_ID_MASK 0xFFF0
-
-// ST5481 endpoints when using alternative setting 3 (2B+D).
-// To get the endpoint address, OR with 0x80 for IN endpoints.
-
-#define EP_CTRL 0x00U /* Control endpoint */
-#define EP_INT 0x01U /* Interrupt endpoint */
-#define EP_B1_OUT 0x02U /* B1 channel out */
-#define EP_B1_IN 0x03U /* B1 channel in */
-#define EP_B2_OUT 0x04U /* B2 channel out */
-#define EP_B2_IN 0x05U /* B2 channel in */
-#define EP_D_OUT 0x06U /* D channel out */
-#define EP_D_IN 0x07U /* D channel in */
-
-// Number of isochronous packets. With 20 packets we get
-// 50 interrupts/sec for each endpoint.
-
-#define NUM_ISO_PACKETS_D 20
-#define NUM_ISO_PACKETS_B 20
-
-// Size of each isochronous packet.
-// In outgoing direction we need to match ISDN data rates:
-// D: 2 bytes / msec -> 16 kbit / s
-// B: 16 bytes / msec -> 64 kbit / s
-#define SIZE_ISO_PACKETS_D_IN 16
-#define SIZE_ISO_PACKETS_D_OUT 2
-#define SIZE_ISO_PACKETS_B_IN 32
-#define SIZE_ISO_PACKETS_B_OUT 8
-
-// If we overrun/underrun, we send one packet with +/- 2 bytes
-#define B_FLOW_ADJUST 2
-
-// Registers that are written using vendor specific device request
-// on endpoint 0.
-
-#define LBA 0x02 /* S loopback */
-#define SET_DEFAULT 0x06 /* Soft reset */
-#define LBB 0x1D /* S maintenance loopback */
-#define STT 0x1e /* S force transmission signals */
-#define SDA_MIN 0x20 /* SDA-sin minimal value */
-#define SDA_MAX 0x21 /* SDA-sin maximal value */
-#define SDELAY_VALUE 0x22 /* Delay between Tx and Rx clock */
-#define IN_D_COUNTER 0x36 /* D receive channel fifo counter */
-#define OUT_D_COUNTER 0x37 /* D transmit channel fifo counter */
-#define IN_B1_COUNTER 0x38 /* B1 receive channel fifo counter */
-#define OUT_B1_COUNTER 0x39 /* B1 transmit channel fifo counter */
-#define IN_B2_COUNTER 0x3a /* B2 receive channel fifo counter */
-#define OUT_B2_COUNTER 0x3b /* B2 transmit channel fifo counter */
-#define FFCTRL_IN_D 0x3C /* D receive channel fifo threshold low */
-#define FFCTRH_IN_D 0x3D /* D receive channel fifo threshold high */
-#define FFCTRL_OUT_D 0x3E /* D transmit channel fifo threshold low */
-#define FFCTRH_OUT_D 0x3F /* D transmit channel fifo threshold high */
-#define FFCTRL_IN_B1 0x40 /* B1 receive channel fifo threshold low */
-#define FFCTRH_IN_B1 0x41 /* B1 receive channel fifo threshold high */
-#define FFCTRL_OUT_B1 0x42 /* B1 transmit channel fifo threshold low */
-#define FFCTRH_OUT_B1 0x43 /* B1 transmit channel fifo threshold high */
-#define FFCTRL_IN_B2 0x44 /* B2 receive channel fifo threshold low */
-#define FFCTRH_IN_B2 0x45 /* B2 receive channel fifo threshold high */
-#define FFCTRL_OUT_B2 0x46 /* B2 transmit channel fifo threshold low */
-#define FFCTRH_OUT_B2 0x47 /* B2 transmit channel fifo threshold high */
-#define MPMSK 0x4A /* Multi purpose interrupt MASK register */
-#define FFMSK_D 0x4c /* D fifo interrupt MASK register */
-#define FFMSK_B1 0x4e /* B1 fifo interrupt MASK register */
-#define FFMSK_B2 0x50 /* B2 fifo interrupt MASK register */
-#define GPIO_DIR 0x52 /* GPIO pins direction registers */
-#define GPIO_OUT 0x53 /* GPIO pins output register */
-#define GPIO_IN 0x54 /* GPIO pins input register */
-#define TXCI 0x56 /* CI command to be transmitted */
-
-
-// Format of the interrupt packet received on endpoint 1:
-//
-// +--------+--------+--------+--------+--------+--------+
-// !MPINT !FFINT_D !FFINT_B1!FFINT_B2!CCIST !GPIO_INT!
-// +--------+--------+--------+--------+--------+--------+
-
-// Offsets in the interrupt packet
-
-#define MPINT 0
-#define FFINT_D 1
-#define FFINT_B1 2
-#define FFINT_B2 3
-#define CCIST 4
-#define GPIO_INT 5
-#define INT_PKT_SIZE 6
-
-// MPINT
-#define LSD_INT 0x80 /* S line activity detected */
-#define RXCI_INT 0x40 /* Indicate primitive arrived */
-#define DEN_INT 0x20 /* Signal enabling data out of D Tx fifo */
-#define DCOLL_INT 0x10 /* D channel collision */
-#define AMIVN_INT 0x04 /* AMI violation number reached 2 */
-#define INFOI_INT 0x04 /* INFOi changed */
-#define DRXON_INT 0x02 /* Reception channel active */
-#define GPCHG_INT 0x01 /* GPIO pin value changed */
-
-// FFINT_x
-#define IN_OVERRUN 0x80 /* In fifo overrun */
-#define OUT_UNDERRUN 0x40 /* Out fifo underrun */
-#define IN_UP 0x20 /* In fifo thresholdh up-crossed */
-#define IN_DOWN 0x10 /* In fifo thresholdl down-crossed */
-#define OUT_UP 0x08 /* Out fifo thresholdh up-crossed */
-#define OUT_DOWN 0x04 /* Out fifo thresholdl down-crossed */
-#define IN_COUNTER_ZEROED 0x02 /* In down-counter reached 0 */
-#define OUT_COUNTER_ZEROED 0x01 /* Out down-counter reached 0 */
-
-#define ANY_REC_INT (IN_OVERRUN + IN_UP + IN_DOWN + IN_COUNTER_ZEROED)
-#define ANY_XMIT_INT (OUT_UNDERRUN + OUT_UP + OUT_DOWN + OUT_COUNTER_ZEROED)
-
-
-// Level 1 commands that are sent using the TXCI device request
-#define ST5481_CMD_DR 0x0 /* Deactivation Request */
-#define ST5481_CMD_RES 0x1 /* state machine RESet */
-#define ST5481_CMD_TM1 0x2 /* Test Mode 1 */
-#define ST5481_CMD_TM2 0x3 /* Test Mode 2 */
-#define ST5481_CMD_PUP 0x7 /* Power UP */
-#define ST5481_CMD_AR8 0x8 /* Activation Request class 1 */
-#define ST5481_CMD_AR10 0x9 /* Activation Request class 2 */
-#define ST5481_CMD_ARL 0xA /* Activation Request Loopback */
-#define ST5481_CMD_PDN 0xF /* Power DoWn */
-
-// Turn on/off the LEDs using the GPIO device request.
-// To use the B LEDs, number_of_leds must be set to 4
-#define B1_LED 0x10U
-#define B2_LED 0x20U
-#define GREEN_LED 0x40U
-#define RED_LED 0x80U
-
-// D channel out states
-enum {
- ST_DOUT_NONE,
-
- ST_DOUT_SHORT_INIT,
- ST_DOUT_SHORT_WAIT_DEN,
-
- ST_DOUT_LONG_INIT,
- ST_DOUT_LONG_WAIT_DEN,
- ST_DOUT_NORMAL,
-
- ST_DOUT_WAIT_FOR_UNDERRUN,
- ST_DOUT_WAIT_FOR_NOT_BUSY,
- ST_DOUT_WAIT_FOR_STOP,
- ST_DOUT_WAIT_FOR_RESET,
-};
-
-#define DOUT_STATE_COUNT (ST_DOUT_WAIT_FOR_RESET + 1)
-
-// D channel out events
-enum {
- EV_DOUT_START_XMIT,
- EV_DOUT_COMPLETE,
- EV_DOUT_DEN,
- EV_DOUT_RESETED,
- EV_DOUT_STOPPED,
- EV_DOUT_COLL,
- EV_DOUT_UNDERRUN,
-};
-
-#define DOUT_EVENT_COUNT (EV_DOUT_UNDERRUN + 1)
-
-// ----------------------------------------------------------------------
-
-enum {
- ST_L1_F3,
- ST_L1_F4,
- ST_L1_F6,
- ST_L1_F7,
- ST_L1_F8,
-};
-
-#define L1_STATE_COUNT (ST_L1_F8 + 1)
-
-// The first 16 entries match the Level 1 indications that
-// are found at offset 4 (CCIST) in the interrupt packet
-
-enum {
- EV_IND_DP, // 0000 Deactivation Pending
- EV_IND_1, // 0001
- EV_IND_2, // 0010
- EV_IND_3, // 0011
- EV_IND_RSY, // 0100 ReSYnchronizing
- EV_IND_5, // 0101
- EV_IND_6, // 0110
- EV_IND_7, // 0111
- EV_IND_AP, // 1000 Activation Pending
- EV_IND_9, // 1001
- EV_IND_10, // 1010
- EV_IND_11, // 1011
- EV_IND_AI8, // 1100 Activation Indication class 8
- EV_IND_AI10,// 1101 Activation Indication class 10
- EV_IND_AIL, // 1110 Activation Indication Loopback
- EV_IND_DI, // 1111 Deactivation Indication
- EV_PH_ACTIVATE_REQ,
- EV_PH_DEACTIVATE_REQ,
- EV_TIMER3,
-};
-
-#define L1_EVENT_COUNT (EV_TIMER3 + 1)
-
-#define ERR(format, arg...) \
- printk(KERN_ERR "%s:%s: " format "\n" , __FILE__, __func__ , ## arg)
-
-#define WARNING(format, arg...) \
- printk(KERN_WARNING "%s:%s: " format "\n" , __FILE__, __func__ , ## arg)
-
-#define INFO(format, arg...) \
- printk(KERN_INFO "%s:%s: " format "\n" , __FILE__, __func__ , ## arg)
-
-#include <linux/isdn/hdlc.h>
-#include "fsm.h"
-#include "hisax_if.h"
-#include <linux/skbuff.h>
-
-/* ======================================================================
- * FIFO handling
- */
-
-/* Generic FIFO structure */
-struct fifo {
- u_char r, w, count, size;
- spinlock_t lock;
-};
-
-/*
- * Init an FIFO
- */
-static inline void fifo_init(struct fifo *fifo, int size)
-{
- fifo->r = fifo->w = fifo->count = 0;
- fifo->size = size;
- spin_lock_init(&fifo->lock);
-}
-
-/*
- * Add an entry to the FIFO
- */
-static inline int fifo_add(struct fifo *fifo)
-{
- unsigned long flags;
- int index;
-
- if (!fifo) {
- return -1;
- }
-
- spin_lock_irqsave(&fifo->lock, flags);
- if (fifo->count == fifo->size) {
- // FIFO full
- index = -1;
- } else {
- // Return index where to get the next data to add to the FIFO
- index = fifo->w++ & (fifo->size - 1);
- fifo->count++;
- }
- spin_unlock_irqrestore(&fifo->lock, flags);
- return index;
-}
-
-/*
- * Remove an entry from the FIFO with the index returned.
- */
-static inline int fifo_remove(struct fifo *fifo)
-{
- unsigned long flags;
- int index;
-
- if (!fifo) {
- return -1;
- }
-
- spin_lock_irqsave(&fifo->lock, flags);
- if (!fifo->count) {
- // FIFO empty
- index = -1;
- } else {
- // Return index where to get the next data from the FIFO
- index = fifo->r++ & (fifo->size - 1);
- fifo->count--;
- }
- spin_unlock_irqrestore(&fifo->lock, flags);
-
- return index;
-}
-
-/* ======================================================================
- * control pipe
- */
-typedef void (*ctrl_complete_t)(void *);
-
-typedef struct ctrl_msg {
- struct usb_ctrlrequest dr;
- ctrl_complete_t complete;
- void *context;
-} ctrl_msg;
-
-/* FIFO of ctrl messages waiting to be sent */
-#define MAX_EP0_MSG 16
-struct ctrl_msg_fifo {
- struct fifo f;
- struct ctrl_msg data[MAX_EP0_MSG];
-};
-
-#define MAX_DFRAME_LEN_L1 300
-#define HSCX_BUFMAX 4096
-
-struct st5481_ctrl {
- struct ctrl_msg_fifo msg_fifo;
- unsigned long busy;
- struct urb *urb;
-};
-
-struct st5481_intr {
- // struct evt_fifo evt_fifo;
- struct urb *urb;
-};
-
-struct st5481_d_out {
- struct isdnhdlc_vars hdlc_state;
- struct urb *urb[2]; /* double buffering */
- unsigned long busy;
- struct sk_buff *tx_skb;
- struct FsmInst fsm;
-};
-
-struct st5481_b_out {
- struct isdnhdlc_vars hdlc_state;
- struct urb *urb[2]; /* double buffering */
- u_char flow_event;
- u_long busy;
- struct sk_buff *tx_skb;
-};
-
-struct st5481_in {
- struct isdnhdlc_vars hdlc_state;
- struct urb *urb[2]; /* double buffering */
- int mode;
- int bufsize;
- unsigned int num_packets;
- unsigned int packet_size;
- unsigned char ep, counter;
- unsigned char *rcvbuf;
- struct st5481_adapter *adapter;
- struct hisax_if *hisax_if;
-};
-
-int st5481_setup_in(struct st5481_in *in);
-void st5481_release_in(struct st5481_in *in);
-void st5481_in_mode(struct st5481_in *in, int mode);
-
-struct st5481_bcs {
- struct hisax_b_if b_if;
- struct st5481_adapter *adapter;
- struct st5481_in b_in;
- struct st5481_b_out b_out;
- int channel;
- int mode;
-};
-
-struct st5481_adapter {
- int number_of_leds;
- struct usb_device *usb_dev;
- struct hisax_d_if hisax_d_if;
-
- struct st5481_ctrl ctrl;
- struct st5481_intr intr;
- struct st5481_in d_in;
- struct st5481_d_out d_out;
-
- unsigned char leds;
- unsigned int led_counter;
-
- unsigned long event;
-
- struct FsmInst l1m;
- struct FsmTimer timer;
-
- struct st5481_bcs bcs[2];
-};
-
-#define TIMER3_VALUE 7000
-
-/* ======================================================================
- *
- */
-
-/*
- * Submit an URB with error reporting. This is a macro so
- * the __func__ returns the caller function name.
- */
-#define SUBMIT_URB(urb, mem_flags) \
- ({ \
- int status; \
- if ((status = usb_submit_urb(urb, mem_flags)) < 0) { \
- WARNING("usb_submit_urb failed,status=%d", status); \
- } \
- status; \
- })
-
-/*
- * USB double buffering, return the URB index (0 or 1).
- */
-static inline int get_buf_nr(struct urb *urbs[], struct urb *urb)
-{
- return (urbs[0] == urb ? 0 : 1);
-}
-
-/* ---------------------------------------------------------------------- */
-
-/* B Channel */
-
-int st5481_setup_b(struct st5481_bcs *bcs);
-void st5481_release_b(struct st5481_bcs *bcs);
-void st5481_d_l2l1(struct hisax_if *hisax_d_if, int pr, void *arg);
-
-/* D Channel */
-
-int st5481_setup_d(struct st5481_adapter *adapter);
-void st5481_release_d(struct st5481_adapter *adapter);
-void st5481_b_l2l1(struct hisax_if *b_if, int pr, void *arg);
-int st5481_d_init(void);
-void st5481_d_exit(void);
-
-/* USB */
-void st5481_ph_command(struct st5481_adapter *adapter, unsigned int command);
-int st5481_setup_isocpipes(struct urb *urb[2], struct usb_device *dev,
- unsigned int pipe, int num_packets,
- int packet_size, int buf_size,
- usb_complete_t complete, void *context);
-void st5481_release_isocpipes(struct urb *urb[2]);
-
-void st5481_usb_pipe_reset(struct st5481_adapter *adapter,
- u_char pipe, ctrl_complete_t complete, void *context);
-void st5481_usb_device_ctrl_msg(struct st5481_adapter *adapter,
- u8 request, u16 value,
- ctrl_complete_t complete, void *context);
-int st5481_setup_usb(struct st5481_adapter *adapter);
-void st5481_release_usb(struct st5481_adapter *adapter);
-void st5481_start(struct st5481_adapter *adapter);
-void st5481_stop(struct st5481_adapter *adapter);
-
-// ----------------------------------------------------------------------
-// debugging macros
-
-#define __debug_variable st5481_debug
-#include "hisax_debug.h"
-
-extern int st5481_debug;
-
-#ifdef CONFIG_HISAX_DEBUG
-
-#define DBG_ISO_PACKET(level, urb) \
- if (level & __debug_variable) dump_iso_packet(__func__, urb)
-
-static void __attribute__((unused))
-dump_iso_packet(const char *name, struct urb *urb)
-{
- int i, j;
- int len, ofs;
- u_char *data;
-
- printk(KERN_DEBUG "%s: packets=%d,errors=%d\n",
- name, urb->number_of_packets, urb->error_count);
- for (i = 0; i < urb->number_of_packets; ++i) {
- if (urb->pipe & USB_DIR_IN) {
- len = urb->iso_frame_desc[i].actual_length;
- } else {
- len = urb->iso_frame_desc[i].length;
- }
- ofs = urb->iso_frame_desc[i].offset;
- printk(KERN_DEBUG "len=%.2d,ofs=%.3d ", len, ofs);
- if (len) {
- data = urb->transfer_buffer + ofs;
- for (j = 0; j < len; j++) {
- printk("%.2x", data[j]);
- }
- }
- printk("\n");
- }
-}
-
-static inline const char *ST5481_CMD_string(int evt)
-{
- static char s[16];
-
- switch (evt) {
- case ST5481_CMD_DR: return "DR";
- case ST5481_CMD_RES: return "RES";
- case ST5481_CMD_TM1: return "TM1";
- case ST5481_CMD_TM2: return "TM2";
- case ST5481_CMD_PUP: return "PUP";
- case ST5481_CMD_AR8: return "AR8";
- case ST5481_CMD_AR10: return "AR10";
- case ST5481_CMD_ARL: return "ARL";
- case ST5481_CMD_PDN: return "PDN";
- }
-
- sprintf(s, "0x%x", evt);
- return s;
-}
-
-#else
-
-#define DBG_ISO_PACKET(level, urb) do {} while (0)
-
-#endif
-
-
-
-#endif