Merge branch irq/riscv-ipi into irq/irqchip-next

* irq/riscv-ipi:
  : .
  : RISC-V IPI rework from Anup Patel:
  :
  : "This series aims to improve IPI support in Linux RISC-V in following ways:
  :  1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V
  :     specific hooks. This also makes Linux RISC-V IPI support aligned with
  :     other architectures.
  :  2) Remote TLB flushes and icache flushes should prefer local IPIs instead
  :     of SBI calls whenever we have specialized hardware (such as RISC-V AIA
  :     IMSIC and RISC-V SWI) which allows S-mode software to directly inject
  :     IPIs without any assistance from M-mode runtime firmware."
  : .
  irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
  RISC-V: Use IPIs for remote icache flush when possible
  RISC-V: Use IPIs for remote TLB flush when possible
  RISC-V: Allow marking IPIs as suitable for remote FENCEs
  RISC-V: Treat IPIs as normal Linux IRQs
  irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
  RISC-V: Clear SIP bit only when using SBI IPI operations

Signed-off-by: Marc Zyngier <maz@kernel.org>

2 files changed, 45 insertions, 27 deletions

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index e7bb3554c544..09e422da482f 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -537,6 +537,7 @@ config TI_PRUSS_INTC
 config RISCV_INTC
 	bool
 	depends on RISCV
+	select IRQ_DOMAIN_HIERARCHY
 
 config SIFIVE_PLIC
 	bool
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 499e5f81b3fe..f229e3e66387 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -26,20 +26,7 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 	if (unlikely(cause >= BITS_PER_LONG))
 		panic("unexpected interrupt cause");
 
-	switch (cause) {
-#ifdef CONFIG_SMP
-	case RV_IRQ_SOFT:
-		/*
-		 * We only use software interrupts to pass IPIs, so if a
-		 * non-SMP system gets one, then we don't know what to do.
-		 */
-		handle_IPI(regs);
-		break;
-#endif
-	default:
-		generic_handle_domain_irq(intc_domain, cause);
-		break;
-	}
+	generic_handle_domain_irq(intc_domain, cause);
 }
 
 /*
@@ -59,22 +46,27 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
-static int riscv_intc_cpu_starting(unsigned int cpu)
-{
-	csr_set(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
-}
-
-static int riscv_intc_cpu_dying(unsigned int cpu)
+static void riscv_intc_irq_eoi(struct irq_data *d)
 {
-	csr_clear(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
+	/*
+	 * The RISC-V INTC driver uses handle_percpu_devid_irq() flow
+	 * for the per-HART local interrupts and child irqchip drivers
+	 * (such as PLIC, SBI IPI, CLINT, APLIC, IMSIC, etc) implement
+	 * chained handlers for the per-HART local interrupts.
+	 *
+	 * In the absence of irq_eoi(), the chained_irq_enter() and
+	 * chained_irq_exit() functions (used by child irqchip drivers)
+	 * will do unnecessary mask/unmask of per-HART local interrupts
+	 * at the time of handling interrupts. To avoid this, we provide
+	 * an empty irq_eoi() callback for RISC-V INTC irqchip.
+	 */
 }
 
 static struct irq_chip riscv_intc_chip = {
 	.name = "RISC-V INTC",
 	.irq_mask = riscv_intc_irq_mask,
 	.irq_unmask = riscv_intc_irq_unmask,
+	.irq_eoi = riscv_intc_irq_eoi,
 };
 
 static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
@@ -87,11 +79,39 @@ static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
+static int riscv_intc_domain_alloc(struct irq_domain *domain,
+				   unsigned int virq, unsigned int nr_irqs,
+				   void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static const struct irq_domain_ops riscv_intc_domain_ops = {
 	.map	= riscv_intc_domain_map,
 	.xlate	= irq_domain_xlate_onecell,
+	.alloc	= riscv_intc_domain_alloc
 };
 
+static struct fwnode_handle *riscv_intc_hwnode(void)
+{
+	return intc_domain->fwnode;
+}
+
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
@@ -126,10 +146,7 @@ static int __init riscv_intc_init(struct device_node *node,
 		return rc;
 	}
 
-	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
-			  "irqchip/riscv/intc:starting",
-			  riscv_intc_cpu_starting,
-			  riscv_intc_cpu_dying);
+	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
 	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);