iommu/hyper-v: Add Hyper-V stub IOMMU driver

On the bare metal, enabling X2APIC mode requires interrupt remapping
function which helps to deliver irq to cpu with 32-bit APIC ID.
Hyper-V doesn't provide interrupt remapping function so far and Hyper-V
MSI protocol already supports to deliver interrupt to the CPU whose
virtual processor index is more than 255. IO-APIC interrupt still has
8-bit APIC ID limitation.

This patch is to add Hyper-V stub IOMMU driver in order to enable
X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC
interrupt remapping capability when X2APIC mode is available. Otherwise,
it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity
and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID.

Define 24 IO-APIC remapping entries because Hyper-V only expose one
single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec(
https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf).

Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

1 files changed, 196 insertions, 0 deletions

diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
new file mode 100644
index 000000000000..a386b83e0e34
--- /dev/null
+++ b/drivers/iommu/hyperv-iommu.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Hyper-V stub IOMMU driver.
+ *
+ * Copyright (C) 2019, Microsoft, Inc.
+ *
+ * Author : Lan Tianyu <Tianyu.Lan@microsoft.com>
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/iommu.h>
+#include <linux/module.h>
+
+#include <asm/apic.h>
+#include <asm/cpu.h>
+#include <asm/hw_irq.h>
+#include <asm/io_apic.h>
+#include <asm/irq_remapping.h>
+#include <asm/hypervisor.h>
+
+#include "irq_remapping.h"
+
+#ifdef CONFIG_IRQ_REMAP
+
+/*
+ * According 82093AA IO-APIC spec , IO APIC has a 24-entry Interrupt
+ * Redirection Table. Hyper-V exposes one single IO-APIC and so define
+ * 24 IO APIC remmapping entries.
+ */
+#define IOAPIC_REMAPPING_ENTRY 24
+
+static cpumask_t ioapic_max_cpumask = { CPU_BITS_NONE };
+static struct irq_domain *ioapic_ir_domain;
+
+static int hyperv_ir_set_affinity(struct irq_data *data,
+		const struct cpumask *mask, bool force)
+{
+	struct irq_data *parent = data->parent_data;
+	struct irq_cfg *cfg = irqd_cfg(data);
+	struct IO_APIC_route_entry *entry;
+	int ret;
+
+	/* Return error If new irq affinity is out of ioapic_max_cpumask. */
+	if (!cpumask_subset(mask, &ioapic_max_cpumask))
+		return -EINVAL;
+
+	ret = parent->chip->irq_set_affinity(parent, mask, force);
+	if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
+		return ret;
+
+	entry = data->chip_data;
+	entry->dest = cfg->dest_apicid;
+	entry->vector = cfg->vector;
+	send_cleanup_vector(cfg);
+
+	return 0;
+}
+
+static struct irq_chip hyperv_ir_chip = {
+	.name			= "HYPERV-IR",
+	.irq_ack		= apic_ack_irq,
+	.irq_set_affinity	= hyperv_ir_set_affinity,
+};
+
+static int hyperv_irq_remapping_alloc(struct irq_domain *domain,
+				     unsigned int virq, unsigned int nr_irqs,
+				     void *arg)
+{
+	struct irq_alloc_info *info = arg;
+	struct irq_data *irq_data;
+	struct irq_desc *desc;
+	int ret = 0;
+
+	if (!info || info->type != X86_IRQ_ALLOC_TYPE_IOAPIC || nr_irqs > 1)
+		return -EINVAL;
+
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
+	if (ret < 0)
+		return ret;
+
+	irq_data = irq_domain_get_irq_data(domain, virq);
+	if (!irq_data) {
+		irq_domain_free_irqs_common(domain, virq, nr_irqs);
+		return -EINVAL;
+	}
+
+	irq_data->chip = &hyperv_ir_chip;
+
+	/*
+	 * If there is interrupt remapping function of IOMMU, setting irq
+	 * affinity only needs to change IRTE of IOMMU. But Hyper-V doesn't
+	 * support interrupt remapping function, setting irq affinity of IO-APIC
+	 * interrupts still needs to change IO-APIC registers. But ioapic_
+	 * configure_entry() will ignore value of cfg->vector and cfg->
+	 * dest_apicid when IO-APIC's parent irq domain is not the vector
+	 * domain.(See ioapic_configure_entry()) In order to setting vector
+	 * and dest_apicid to IO-APIC register, IO-APIC entry pointer is saved
+	 * in the chip_data and hyperv_irq_remapping_activate()/hyperv_ir_set_
+	 * affinity() set vector and dest_apicid directly into IO-APIC entry.
+	 */
+	irq_data->chip_data = info->ioapic_entry;
+
+	/*
+	 * Hypver-V IO APIC irq affinity should be in the scope of
+	 * ioapic_max_cpumask because no irq remapping support.
+	 */
+	desc = irq_data_to_desc(irq_data);
+	cpumask_copy(desc->irq_common_data.affinity, &ioapic_max_cpumask);
+
+	return 0;
+}
+
+static void hyperv_irq_remapping_free(struct irq_domain *domain,
+				 unsigned int virq, unsigned int nr_irqs)
+{
+	irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static int hyperv_irq_remapping_activate(struct irq_domain *domain,
+			  struct irq_data *irq_data, bool reserve)
+{
+	struct irq_cfg *cfg = irqd_cfg(irq_data);
+	struct IO_APIC_route_entry *entry = irq_data->chip_data;
+
+	entry->dest = cfg->dest_apicid;
+	entry->vector = cfg->vector;
+
+	return 0;
+}
+
+static struct irq_domain_ops hyperv_ir_domain_ops = {
+	.alloc = hyperv_irq_remapping_alloc,
+	.free = hyperv_irq_remapping_free,
+	.activate = hyperv_irq_remapping_activate,
+};
+
+static int __init hyperv_prepare_irq_remapping(void)
+{
+	struct fwnode_handle *fn;
+	int i;
+
+	if (!hypervisor_is_type(X86_HYPER_MS_HYPERV) ||
+	    !x2apic_supported())
+		return -ENODEV;
+
+	fn = irq_domain_alloc_named_id_fwnode("HYPERV-IR", 0);
+	if (!fn)
+		return -ENOMEM;
+
+	ioapic_ir_domain =
+		irq_domain_create_hierarchy(arch_get_ir_parent_domain(),
+				0, IOAPIC_REMAPPING_ENTRY, fn,
+				&hyperv_ir_domain_ops, NULL);
+
+	irq_domain_free_fwnode(fn);
+
+	/*
+	 * Hyper-V doesn't provide irq remapping function for
+	 * IO-APIC and so IO-APIC only accepts 8-bit APIC ID.
+	 * Cpu's APIC ID is read from ACPI MADT table and APIC IDs
+	 * in the MADT table on Hyper-v are sorted monotonic increasingly.
+	 * APIC ID reflects cpu topology. There maybe some APIC ID
+	 * gaps when cpu number in a socket is not power of two. Prepare
+	 * max cpu affinity for IOAPIC irqs. Scan cpu 0-255 and set cpu
+	 * into ioapic_max_cpumask if its APIC ID is less than 256.
+	 */
+	for (i = min_t(unsigned int, num_possible_cpus() - 1, 255); i >= 0; i--)
+		if (cpu_physical_id(i) < 256)
+			cpumask_set_cpu(i, &ioapic_max_cpumask);
+
+	return 0;
+}
+
+static int __init hyperv_enable_irq_remapping(void)
+{
+	return IRQ_REMAP_X2APIC_MODE;
+}
+
+static struct irq_domain *hyperv_get_ir_irq_domain(struct irq_alloc_info *info)
+{
+	if (info->type == X86_IRQ_ALLOC_TYPE_IOAPIC)
+		return ioapic_ir_domain;
+	else
+		return NULL;
+}
+
+struct irq_remap_ops hyperv_irq_remap_ops = {
+	.prepare		= hyperv_prepare_irq_remapping,
+	.enable			= hyperv_enable_irq_remapping,
+	.get_ir_irq_domain	= hyperv_get_ir_irq_domain,
+};
+
+#endif