Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.

6 files changed, 135 insertions, 110 deletions

diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 5daec8e988c6..c9c7224d5ae0 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -47,7 +47,7 @@ config SERIO_SERPORT
 	  Say Y here if you plan to use an input device (mouse, joystick,
 	  tablet, 6dof) that communicates over the RS232 serial (COM) port.
 
-	  More information is available: <file:Documentation/input/input.txt>
+	  More information is available: <file:Documentation/input/input.rst>
 
 	  If unsure, say Y.
 
@@ -78,7 +78,7 @@ config SERIO_PARKBD
 	  Say Y here if you built a simple parallel port adapter to attach
 	  an additional AT keyboard, XT keyboard or PS/2 mouse.
 
-	  More information is available: <file:Documentation/input/input.txt>
+	  More information is available: <file:Documentation/input/input.rst>
 
 	  If unsure, say N.
 
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 3df501c3421b..f8663d7891f2 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -20,32 +20,33 @@
  * However, when used with the E3 mailboard that producecs non-standard
  * scancodes, a custom key table must be prepared and loaded from userspace.
  */
-#include <linux/gpio.h>
 #include <linux/irq.h>
+#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/serio.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 
-#include <asm/mach-types.h>
-#include <mach/board-ams-delta.h>
-
-#include <mach/ams-delta-fiq.h>
+#define DRIVER_NAME	"ams-delta-serio"
 
 MODULE_AUTHOR("Matt Callow");
 MODULE_DESCRIPTION("AMS Delta (E3) keyboard port driver");
 MODULE_LICENSE("GPL");
 
-static struct serio *ams_delta_serio;
+struct ams_delta_serio {
+	struct serio *serio;
+	struct regulator *vcc;
+	unsigned int *fiq_buffer;
+};
 
-static int check_data(int data)
+static int check_data(struct serio *serio, int data)
 {
 	int i, parity = 0;
 
 	/* check valid stop bit */
 	if (!(data & 0x400)) {
-		dev_warn(&ams_delta_serio->dev,
-				"invalid stop bit, data=0x%X\n",
-				data);
+		dev_warn(&serio->dev, "invalid stop bit, data=0x%X\n", data);
 		return SERIO_FRAME;
 	}
 	/* calculate the parity */
@@ -55,9 +56,9 @@ static int check_data(int data)
 	}
 	/* it should be odd */
 	if (!(parity & 0x01)) {
-		dev_warn(&ams_delta_serio->dev,
-				"parity check failed, data=0x%X parity=0x%X\n",
-				data, parity);
+		dev_warn(&serio->dev,
+			 "parity check failed, data=0x%X parity=0x%X\n", data,
+			 parity);
 		return SERIO_PARITY;
 	}
 	return 0;
@@ -65,127 +66,130 @@ static int check_data(int data)
 
 static irqreturn_t ams_delta_serio_interrupt(int irq, void *dev_id)
 {
-	int *circ_buff = &fiq_buffer[FIQ_CIRC_BUFF];
+	struct ams_delta_serio *priv = dev_id;
+	int *circ_buff = &priv->fiq_buffer[FIQ_CIRC_BUFF];
 	int data, dfl;
 	u8 scancode;
 
-	fiq_buffer[FIQ_IRQ_PEND] = 0;
+	priv->fiq_buffer[FIQ_IRQ_PEND] = 0;
 
 	/*
 	 * Read data from the circular buffer, check it
 	 * and then pass it on the serio
 	 */
-	while (fiq_buffer[FIQ_KEYS_CNT] > 0) {
+	while (priv->fiq_buffer[FIQ_KEYS_CNT] > 0) {
 
-		data = circ_buff[fiq_buffer[FIQ_HEAD_OFFSET]++];
-		fiq_buffer[FIQ_KEYS_CNT]--;
-		if (fiq_buffer[FIQ_HEAD_OFFSET] == fiq_buffer[FIQ_BUF_LEN])
-			fiq_buffer[FIQ_HEAD_OFFSET] = 0;
+		data = circ_buff[priv->fiq_buffer[FIQ_HEAD_OFFSET]++];
+		priv->fiq_buffer[FIQ_KEYS_CNT]--;
+		if (priv->fiq_buffer[FIQ_HEAD_OFFSET] ==
+		    priv->fiq_buffer[FIQ_BUF_LEN])
+			priv->fiq_buffer[FIQ_HEAD_OFFSET] = 0;
 
-		dfl = check_data(data);
+		dfl = check_data(priv->serio, data);
 		scancode = (u8) (data >> 1) & 0xFF;
-		serio_interrupt(ams_delta_serio, scancode, dfl);
+		serio_interrupt(priv->serio, scancode, dfl);
 	}
 	return IRQ_HANDLED;
 }
 
 static int ams_delta_serio_open(struct serio *serio)
 {
-	/* enable keyboard */
-	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 1);
+	struct ams_delta_serio *priv = serio->port_data;
 
-	return 0;
+	/* enable keyboard */
+	return regulator_enable(priv->vcc);
 }
 
 static void ams_delta_serio_close(struct serio *serio)
 {
+	struct ams_delta_serio *priv = serio->port_data;
+
 	/* disable keyboard */
-	gpio_set_value(AMS_DELTA_GPIO_PIN_KEYBRD_PWR, 0);
+	regulator_disable(priv->vcc);
 }
 
-static const struct gpio ams_delta_gpios[] __initconst_or_module = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
-		.flags	= GPIOF_DIR_IN,
-		.label	= "serio-data",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_CLK,
-		.flags	= GPIOF_DIR_IN,
-		.label	= "serio-clock",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "serio-power",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "serio-dataout",
-	},
-};
-
-static int __init ams_delta_serio_init(void)
+static int ams_delta_serio_init(struct platform_device *pdev)
 {
-	int err;
-
-	if (!machine_is_ams_delta())
-		return -ENODEV;
+	struct ams_delta_serio *priv;
+	struct serio *serio;
+	int irq, err;
 
-	ams_delta_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!ams_delta_serio)
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
 
-	ams_delta_serio->id.type = SERIO_8042;
-	ams_delta_serio->open = ams_delta_serio_open;
-	ams_delta_serio->close = ams_delta_serio_close;
-	strlcpy(ams_delta_serio->name, "AMS DELTA keyboard adapter",
-			sizeof(ams_delta_serio->name));
-	strlcpy(ams_delta_serio->phys, "GPIO/serio0",
-			sizeof(ams_delta_serio->phys));
-
-	err = gpio_request_array(ams_delta_gpios,
-				ARRAY_SIZE(ams_delta_gpios));
-	if (err) {
-		pr_err("ams_delta_serio: Couldn't request gpio pins\n");
-		goto serio;
+	priv->fiq_buffer = pdev->dev.platform_data;
+	if (!priv->fiq_buffer)
+		return -EINVAL;
+
+	priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(priv->vcc)) {
+		err = PTR_ERR(priv->vcc);
+		dev_err(&pdev->dev, "regulator request failed (%d)\n", err);
+		/*
+		 * When running on a non-dt platform and requested regulator
+		 * is not available, devm_regulator_get() never returns
+		 * -EPROBE_DEFER as it is not able to justify if the regulator
+		 * may still appear later.  On the other hand, the board can
+		 * still set full constriants flag at late_initcall in order
+		 * to instruct devm_regulator_get() to returnn a dummy one
+		 * if sufficient.  Hence, if we get -ENODEV here, let's convert
+		 * it to -EPROBE_DEFER and wait for the board to decide or
+		 * let Deferred Probe infrastructure handle this error.
+		 */
+		if (err == -ENODEV)
+			err = -EPROBE_DEFER;
+		return err;
 	}
 
-	err = request_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
-			ams_delta_serio_interrupt, IRQ_TYPE_EDGE_RISING,
-			"ams-delta-serio", 0);
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	err = devm_request_irq(&pdev->dev, irq, ams_delta_serio_interrupt,
+			       IRQ_TYPE_EDGE_RISING, DRIVER_NAME, priv);
 	if (err < 0) {
-		pr_err("ams_delta_serio: couldn't request gpio interrupt %d\n",
-				gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
-		goto gpio;
+		dev_err(&pdev->dev, "IRQ request failed (%d)\n", err);
+		return err;
 	}
-	/*
-	 * Since GPIO register handling for keyboard clock pin is performed
-	 * at FIQ level, switch back from edge to simple interrupt handler
-	 * to avoid bad interaction.
-	 */
-	irq_set_handler(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK),
-			handle_simple_irq);
 
-	serio_register_port(ams_delta_serio);
-	dev_info(&ams_delta_serio->dev, "%s\n", ams_delta_serio->name);
+	serio = kzalloc(sizeof(*serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	priv->serio = serio;
+
+	serio->id.type = SERIO_8042;
+	serio->open = ams_delta_serio_open;
+	serio->close = ams_delta_serio_close;
+	strlcpy(serio->name, "AMS DELTA keyboard adapter", sizeof(serio->name));
+	strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+	serio->dev.parent = &pdev->dev;
+	serio->port_data = priv;
+
+	serio_register_port(serio);
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&serio->dev, "%s\n", serio->name);
 
 	return 0;
-gpio:
-	gpio_free_array(ams_delta_gpios,
-			ARRAY_SIZE(ams_delta_gpios));
-serio:
-	kfree(ams_delta_serio);
-	return err;
 }
-module_init(ams_delta_serio_init);
 
-static void __exit ams_delta_serio_exit(void)
+static int ams_delta_serio_exit(struct platform_device *pdev)
 {
-	serio_unregister_port(ams_delta_serio);
-	free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
-	gpio_free_array(ams_delta_gpios,
-			ARRAY_SIZE(ams_delta_gpios));
+	struct ams_delta_serio *priv = platform_get_drvdata(pdev);
+
+	serio_unregister_port(priv->serio);
+
+	return 0;
 }
-module_exit(ams_delta_serio_exit);
+
+static struct platform_driver ams_delta_serio_driver = {
+	.probe	= ams_delta_serio_init,
+	.remove	= ams_delta_serio_exit,
+	.driver	= {
+		.name	= DRIVER_NAME
+	},
+};
+module_platform_driver(ams_delta_serio_driver);
diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index 25151d9214e0..a8b9be3e28db 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -177,7 +177,7 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev,
 		 * state because the Enter-UP can trigger a wakeup at once.
 		 */
 		if (!(info & IS_BREAK))
-			pm_wakeup_event(&hv_dev->device, 0);
+			pm_wakeup_hard_event(&hv_dev->device);
 
 		break;
 
@@ -424,6 +424,9 @@ static struct  hv_driver hv_kbd_drv = {
 	.id_table = id_table,
 	.probe = hv_kbd_probe,
 	.remove = hv_kbd_remove,
+	.driver = {
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
 };
 
 static int __init hv_kbd_init(void)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index b353d494ad40..136f6e7bf797 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -527,6 +527,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"),
 		},
 	},
+	{
+		/* Lenovo LaVie Z */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index b8bc71569349..95a78ccbd847 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1395,15 +1395,26 @@ static void __init i8042_register_ports(void)
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
 		struct serio *serio = i8042_ports[i].serio;
 
-		if (serio) {
-			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
-				serio->name,
-				(unsigned long) I8042_DATA_REG,
-				(unsigned long) I8042_COMMAND_REG,
-				i8042_ports[i].irq);
-			serio_register_port(serio);
-			device_set_wakeup_capable(&serio->dev, true);
-		}
+		if (!serio)
+			continue;
+
+		printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+			serio->name,
+			(unsigned long) I8042_DATA_REG,
+			(unsigned long) I8042_COMMAND_REG,
+			i8042_ports[i].irq);
+		serio_register_port(serio);
+		device_set_wakeup_capable(&serio->dev, true);
+
+		/*
+		 * On platforms using suspend-to-idle, allow the keyboard to
+		 * wake up the system from sleep by enabling keyboard wakeups
+		 * by default.  This is consistent with keyboard wakeup
+		 * behavior on many platforms using suspend-to-RAM (ACPI S3)
+		 * by default.
+		 */
+		if (pm_suspend_via_s2idle() && i == I8042_KBD_PORT_NO)
+			device_set_wakeup_enable(&serio->dev, true);
 	}
 }
 
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index f8ead9f9c77e..5977b8a34ebe 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -226,7 +226,7 @@ static int serport_ldisc_ioctl(struct tty_struct *tty, struct file *file,
 
 #ifdef CONFIG_COMPAT
 #define COMPAT_SPIOCSTYPE	_IOW('q', 0x01, compat_ulong_t)
-static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
+static int serport_ldisc_compat_ioctl(struct tty_struct *tty,
 				       struct file *file,
 				       unsigned int cmd, unsigned long arg)
 {