Input: HIL - cleanup coding style

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

1 files changed, 222 insertions, 173 deletions

diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 353a8a18948b..31826e601fba 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -34,27 +34,27 @@
  *
  * Driver theory of operation:
  *
- * hp_sdc_put does all writing to the SDC.  ISR can run on a different 
- * CPU than hp_sdc_put, but only one CPU runs hp_sdc_put at a time 
+ * hp_sdc_put does all writing to the SDC.  ISR can run on a different
+ * CPU than hp_sdc_put, but only one CPU runs hp_sdc_put at a time
  * (it cannot really benefit from SMP anyway.)  A tasket fit this perfectly.
  *
- * All data coming back from the SDC is sent via interrupt and can be read 
- * fully in the ISR, so there are no latency/throughput problems there.  
- * The problem is with output, due to the slow clock speed of the SDC 
- * compared to the CPU.  This should not be too horrible most of the time, 
- * but if used with HIL devices that support the multibyte transfer command, 
- * keeping outbound throughput flowing at the 6500KBps that the HIL is 
+ * All data coming back from the SDC is sent via interrupt and can be read
+ * fully in the ISR, so there are no latency/throughput problems there.
+ * The problem is with output, due to the slow clock speed of the SDC
+ * compared to the CPU.  This should not be too horrible most of the time,
+ * but if used with HIL devices that support the multibyte transfer command,
+ * keeping outbound throughput flowing at the 6500KBps that the HIL is
  * capable of is more than can be done at HZ=100.
  *
- * Busy polling for IBF clear wastes CPU cycles and bus cycles.  hp_sdc.ibf 
- * is set to 0 when the IBF flag in the status register has cleared.  ISR 
- * may do this, and may also access the parts of queued transactions related 
- * to reading data back from the SDC, but otherwise will not touch the 
+ * Busy polling for IBF clear wastes CPU cycles and bus cycles.  hp_sdc.ibf
+ * is set to 0 when the IBF flag in the status register has cleared.  ISR
+ * may do this, and may also access the parts of queued transactions related
+ * to reading data back from the SDC, but otherwise will not touch the
  * hp_sdc state. Whenever a register is written hp_sdc.ibf is set to 1.
  *
  * The i8042 write index and the values in the 4-byte input buffer
  * starting at 0x70 are kept track of in hp_sdc.wi, and .r7[], respectively,
- * to minimize the amount of IO needed to the SDC.  However these values 
+ * to minimize the amount of IO needed to the SDC.  However these values
  * do not need to be locked since they are only ever accessed by hp_sdc_put.
  *
  * A timer task schedules the tasklet once per second just to make
@@ -106,33 +106,39 @@ EXPORT_SYMBOL(hp_sdc_dequeue_transaction);
 static hp_i8042_sdc	hp_sdc;	/* All driver state is kept in here. */
 
 /*************** primitives for use in any context *********************/
-static inline uint8_t hp_sdc_status_in8 (void) {
+static inline uint8_t hp_sdc_status_in8(void)
+{
 	uint8_t status;
 	unsigned long flags;
 
 	write_lock_irqsave(&hp_sdc.ibf_lock, flags);
 	status = sdc_readb(hp_sdc.status_io);
-	if (!(status & HP_SDC_STATUS_IBF)) hp_sdc.ibf = 0;
+	if (!(status & HP_SDC_STATUS_IBF))
+		hp_sdc.ibf = 0;
 	write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
 
 	return status;
 }
 
-static inline uint8_t hp_sdc_data_in8 (void) {
-	return sdc_readb(hp_sdc.data_io); 
+static inline uint8_t hp_sdc_data_in8(void)
+{
+	return sdc_readb(hp_sdc.data_io);
 }
 
-static inline void hp_sdc_status_out8 (uint8_t val) {
+static inline void hp_sdc_status_out8(uint8_t val)
+{
 	unsigned long flags;
 
 	write_lock_irqsave(&hp_sdc.ibf_lock, flags);
 	hp_sdc.ibf = 1;
-	if ((val & 0xf0) == 0xe0) hp_sdc.wi = 0xff;
+	if ((val & 0xf0) == 0xe0)
+		hp_sdc.wi = 0xff;
 	sdc_writeb(val, hp_sdc.status_io);
 	write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
 }
 
-static inline void hp_sdc_data_out8 (uint8_t val) {
+static inline void hp_sdc_data_out8(uint8_t val)
+{
 	unsigned long flags;
 
 	write_lock_irqsave(&hp_sdc.ibf_lock, flags);
@@ -141,11 +147,12 @@ static inline void hp_sdc_data_out8 (uint8_t val) {
 	write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
 }
 
-/*	Care must be taken to only invoke hp_sdc_spin_ibf when 
- *	absolutely needed, or in rarely invoked subroutines.  
- *	Not only does it waste CPU cycles, it also wastes bus cycles. 
+/*	Care must be taken to only invoke hp_sdc_spin_ibf when
+ *	absolutely needed, or in rarely invoked subroutines.
+ *	Not only does it waste CPU cycles, it also wastes bus cycles.
  */
-static inline void hp_sdc_spin_ibf(void) {
+static inline void hp_sdc_spin_ibf(void)
+{
 	unsigned long flags;
 	rwlock_t *lock;
 
@@ -158,19 +165,21 @@ static inline void hp_sdc_spin_ibf(void) {
 	}
 	read_unlock(lock);
 	write_lock(lock);
-	while (sdc_readb(hp_sdc.status_io) & HP_SDC_STATUS_IBF) {};
+	while (sdc_readb(hp_sdc.status_io) & HP_SDC_STATUS_IBF)
+		{ }
 	hp_sdc.ibf = 0;
 	write_unlock_irqrestore(lock, flags);
 }
 
 
 /************************ Interrupt context functions ************************/
-static void hp_sdc_take (int irq, void *dev_id, uint8_t status, uint8_t data) {
+static void hp_sdc_take(int irq, void *dev_id, uint8_t status, uint8_t data)
+{
 	hp_sdc_transaction *curr;
 
 	read_lock(&hp_sdc.rtq_lock);
 	if (hp_sdc.rcurr < 0) {
-	  	read_unlock(&hp_sdc.rtq_lock);
+		read_unlock(&hp_sdc.rtq_lock);
 		return;
 	}
 	curr = hp_sdc.tq[hp_sdc.rcurr];
@@ -183,25 +192,27 @@ static void hp_sdc_take (int irq, void *dev_id, uint8_t status, uint8_t data) {
 
 	if (hp_sdc.rqty <= 0) {
 		/* All data has been gathered. */
-		if(curr->seq[curr->actidx] & HP_SDC_ACT_SEMAPHORE) {
-			if (curr->act.semaphore) up(curr->act.semaphore);
-		}
-		if(curr->seq[curr->actidx] & HP_SDC_ACT_CALLBACK) {
+		if (curr->seq[curr->actidx] & HP_SDC_ACT_SEMAPHORE)
+			if (curr->act.semaphore)
+				up(curr->act.semaphore);
+
+		if (curr->seq[curr->actidx] & HP_SDC_ACT_CALLBACK)
 			if (curr->act.irqhook)
 				curr->act.irqhook(irq, dev_id, status, data);
-		}
+
 		curr->actidx = curr->idx;
 		curr->idx++;
 		/* Return control of this transaction */
 		write_lock(&hp_sdc.rtq_lock);
-		hp_sdc.rcurr = -1; 
+		hp_sdc.rcurr = -1;
 		hp_sdc.rqty = 0;
 		write_unlock(&hp_sdc.rtq_lock);
 		tasklet_schedule(&hp_sdc.task);
 	}
 }
 
-static irqreturn_t hp_sdc_isr(int irq, void *dev_id) {
+static irqreturn_t hp_sdc_isr(int irq, void *dev_id)
+{
 	uint8_t status, data;
 
 	status = hp_sdc_status_in8();
@@ -209,67 +220,74 @@ static irqreturn_t hp_sdc_isr(int irq, void *dev_id) {
 	data =   hp_sdc_data_in8();
 
 	/* For now we are ignoring these until we get the SDC to behave. */
-	if (((status & 0xf1) == 0x51) && data == 0x82) {
-	  return IRQ_HANDLED;
-	}
+	if (((status & 0xf1) == 0x51) && data == 0x82)
+		return IRQ_HANDLED;
 
-	switch(status & HP_SDC_STATUS_IRQMASK) {
-	      case 0: /* This case is not documented. */
+	switch (status & HP_SDC_STATUS_IRQMASK) {
+	case 0: /* This case is not documented. */
 		break;
-	      case HP_SDC_STATUS_USERTIMER:
-	      case HP_SDC_STATUS_PERIODIC:
-	      case HP_SDC_STATUS_TIMER:
+
+	case HP_SDC_STATUS_USERTIMER:
+	case HP_SDC_STATUS_PERIODIC:
+	case HP_SDC_STATUS_TIMER:
 		read_lock(&hp_sdc.hook_lock);
-	      	if (hp_sdc.timer != NULL)
+		if (hp_sdc.timer != NULL)
 			hp_sdc.timer(irq, dev_id, status, data);
 		read_unlock(&hp_sdc.hook_lock);
 		break;
-	      case HP_SDC_STATUS_REG:
+
+	case HP_SDC_STATUS_REG:
 		hp_sdc_take(irq, dev_id, status, data);
 		break;
-	      case HP_SDC_STATUS_HILCMD:
-	      case HP_SDC_STATUS_HILDATA:
+
+	case HP_SDC_STATUS_HILCMD:
+	case HP_SDC_STATUS_HILDATA:
 		read_lock(&hp_sdc.hook_lock);
 		if (hp_sdc.hil != NULL)
 			hp_sdc.hil(irq, dev_id, status, data);
 		read_unlock(&hp_sdc.hook_lock);
 		break;
-	      case HP_SDC_STATUS_PUP:
+
+	case HP_SDC_STATUS_PUP:
 		read_lock(&hp_sdc.hook_lock);
 		if (hp_sdc.pup != NULL)
 			hp_sdc.pup(irq, dev_id, status, data);
-		else printk(KERN_INFO PREFIX "HP SDC reports successful PUP.\n");
+		else
+			printk(KERN_INFO PREFIX "HP SDC reports successful PUP.\n");
 		read_unlock(&hp_sdc.hook_lock);
 		break;
-	      default:
+
+	default:
 		read_lock(&hp_sdc.hook_lock);
 		if (hp_sdc.cooked != NULL)
 			hp_sdc.cooked(irq, dev_id, status, data);
 		read_unlock(&hp_sdc.hook_lock);
 		break;
 	}
+
 	return IRQ_HANDLED;
 }
 
 
-static irqreturn_t hp_sdc_nmisr(int irq, void *dev_id) {
+static irqreturn_t hp_sdc_nmisr(int irq, void *dev_id)
+{
 	int status;
-	
+
 	status = hp_sdc_status_in8();
 	printk(KERN_WARNING PREFIX "NMI !\n");
 
-#if 0	
+#if 0
 	if (status & HP_SDC_NMISTATUS_FHS) {
 		read_lock(&hp_sdc.hook_lock);
-	      	if (hp_sdc.timer != NULL)
+		if (hp_sdc.timer != NULL)
 			hp_sdc.timer(irq, dev_id, status, 0);
 		read_unlock(&hp_sdc.hook_lock);
-	}
-	else {
+	} else {
 		/* TODO: pass this on to the HIL handler, or do SAK here? */
 		printk(KERN_WARNING PREFIX "HIL NMI\n");
 	}
 #endif
+
 	return IRQ_HANDLED;
 }
 
@@ -278,13 +296,17 @@ static irqreturn_t hp_sdc_nmisr(int irq, void *dev_id) {
 
 unsigned long hp_sdc_put(void);
 
-static void hp_sdc_tasklet(unsigned long foo) {
-
+static void hp_sdc_tasklet(unsigned long foo)
+{
 	write_lock_irq(&hp_sdc.rtq_lock);
+
 	if (hp_sdc.rcurr >= 0) {
 		struct timeval tv;
+
 		do_gettimeofday(&tv);
-		if (tv.tv_sec > hp_sdc.rtv.tv_sec) tv.tv_usec += 1000000;
+		if (tv.tv_sec > hp_sdc.rtv.tv_sec)
+			tv.tv_usec += USEC_PER_SEC;
+
 		if (tv.tv_usec - hp_sdc.rtv.tv_usec > HP_SDC_MAX_REG_DELAY) {
 			hp_sdc_transaction *curr;
 			uint8_t tmp;
@@ -300,27 +322,29 @@ static void hp_sdc_tasklet(unsigned long foo) {
 			hp_sdc.rqty = 0;
 			tmp = curr->seq[curr->actidx];
 			curr->seq[curr->actidx] |= HP_SDC_ACT_DEAD;
-			if(tmp & HP_SDC_ACT_SEMAPHORE) {
-				if (curr->act.semaphore) 
+			if (tmp & HP_SDC_ACT_SEMAPHORE)
+				if (curr->act.semaphore)
 					up(curr->act.semaphore);
-			}
-			if(tmp & HP_SDC_ACT_CALLBACK) {
+
+			if (tmp & HP_SDC_ACT_CALLBACK) {
 				/* Note this means that irqhooks may be called
 				 * in tasklet/bh context.
 				 */
-				if (curr->act.irqhook) 
+				if (curr->act.irqhook)
 					curr->act.irqhook(0, NULL, 0, 0);
 			}
+
 			curr->actidx = curr->idx;
 			curr->idx++;
-			hp_sdc.rcurr = -1; 
+			hp_sdc.rcurr = -1;
 		}
 	}
 	write_unlock_irq(&hp_sdc.rtq_lock);
 	hp_sdc_put();
 }
 
-unsigned long hp_sdc_put(void) {
+unsigned long hp_sdc_put(void)
+{
 	hp_sdc_transaction *curr;
 	uint8_t act;
 	int idx, curridx;
@@ -333,19 +357,24 @@ unsigned long hp_sdc_put(void) {
 	   requires output, so we skip to the administrativa. */
 	if (hp_sdc.ibf) {
 		hp_sdc_status_in8();
-		if (hp_sdc.ibf) goto finish;
+		if (hp_sdc.ibf)
+			goto finish;
 	}
 
  anew:
 	/* See if we are in the middle of a sequence. */
-	if (hp_sdc.wcurr < 0) hp_sdc.wcurr = 0;
+	if (hp_sdc.wcurr < 0)
+		hp_sdc.wcurr = 0;
 	read_lock_irq(&hp_sdc.rtq_lock);
-	if (hp_sdc.rcurr == hp_sdc.wcurr) hp_sdc.wcurr++;
+	if (hp_sdc.rcurr == hp_sdc.wcurr)
+		hp_sdc.wcurr++;
 	read_unlock_irq(&hp_sdc.rtq_lock);
-	if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN) hp_sdc.wcurr = 0;
+	if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+		hp_sdc.wcurr = 0;
 	curridx = hp_sdc.wcurr;
 
-	if (hp_sdc.tq[curridx] != NULL) goto start;
+	if (hp_sdc.tq[curridx] != NULL)
+		goto start;
 
 	while (++curridx != hp_sdc.wcurr) {
 		if (curridx >= HP_SDC_QUEUE_LEN) {
@@ -358,7 +387,8 @@ unsigned long hp_sdc_put(void) {
 			continue;
 		}
 		read_unlock_irq(&hp_sdc.rtq_lock);
-		if (hp_sdc.tq[curridx] != NULL) break; /* Found one. */
+		if (hp_sdc.tq[curridx] != NULL)
+			break; /* Found one. */
 	}
 	if (curridx == hp_sdc.wcurr) { /* There's nothing queued to do. */
 		curridx = -1;
@@ -374,7 +404,8 @@ unsigned long hp_sdc_put(void) {
 		goto finish;
 	}
 
-	if (hp_sdc.wcurr == -1) goto done;
+	if (hp_sdc.wcurr == -1)
+		goto done;
 
 	curr = hp_sdc.tq[curridx];
 	idx = curr->actidx;
@@ -383,20 +414,23 @@ unsigned long hp_sdc_put(void) {
 		hp_sdc.tq[curridx] = NULL;
 		/* Interleave outbound data between the transactions. */
 		hp_sdc.wcurr++;
-		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN) hp_sdc.wcurr = 0;
-		goto finish;	
+		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+			hp_sdc.wcurr = 0;
+		goto finish;
 	}
 
 	act = curr->seq[idx];
 	idx++;
 
 	if (curr->idx >= curr->endidx) {
-		if (act & HP_SDC_ACT_DEALLOC) kfree(curr);
+		if (act & HP_SDC_ACT_DEALLOC)
+			kfree(curr);
 		hp_sdc.tq[curridx] = NULL;
 		/* Interleave outbound data between the transactions. */
 		hp_sdc.wcurr++;
-		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN) hp_sdc.wcurr = 0;
-		goto finish;	
+		if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+			hp_sdc.wcurr = 0;
+		goto finish;
 	}
 
 	while (act & HP_SDC_ACT_PRECMD) {
@@ -409,9 +443,10 @@ unsigned long hp_sdc_put(void) {
 		curr->idx++;
 		/* act finished? */
 		if ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_PRECMD)
-		  goto actdone;
+			goto actdone;
 		/* skip quantity field if data-out sequence follows. */
-		if (act & HP_SDC_ACT_DATAOUT) curr->idx++;
+		if (act & HP_SDC_ACT_DATAOUT)
+			curr->idx++;
 		goto finish;
 	}
 	if (act & HP_SDC_ACT_DATAOUT) {
@@ -423,15 +458,15 @@ unsigned long hp_sdc_put(void) {
 			hp_sdc_data_out8(curr->seq[curr->idx]);
 			curr->idx++;
 			/* act finished? */
-			if ((curr->idx - idx >= qty) && 
-			    ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_DATAOUT))
+			if (curr->idx - idx >= qty &&
+			    (act & HP_SDC_ACT_DURING) == HP_SDC_ACT_DATAOUT)
 				goto actdone;
 			goto finish;
 		}
 		idx += qty;
 		act &= ~HP_SDC_ACT_DATAOUT;
-	}
-	else while (act & HP_SDC_ACT_DATAREG) {
+	} else
+	    while (act & HP_SDC_ACT_DATAREG) {
 		int mask;
 		uint8_t w7[4];
 
@@ -445,26 +480,30 @@ unsigned long hp_sdc_put(void) {
 			act &= ~HP_SDC_ACT_DATAREG;
 			break;
 		}
-		
+
 		w7[0] = (mask & 1) ? curr->seq[++idx] : hp_sdc.r7[0];
 		w7[1] = (mask & 2) ? curr->seq[++idx] : hp_sdc.r7[1];
 		w7[2] = (mask & 4) ? curr->seq[++idx] : hp_sdc.r7[2];
 		w7[3] = (mask & 8) ? curr->seq[++idx] : hp_sdc.r7[3];
-		
+
 		if (hp_sdc.wi > 0x73 || hp_sdc.wi < 0x70 ||
-		        w7[hp_sdc.wi-0x70] == hp_sdc.r7[hp_sdc.wi-0x70]) {
+		    w7[hp_sdc.wi - 0x70] == hp_sdc.r7[hp_sdc.wi - 0x70]) {
 			int i = 0;
 
-			/* Need to point the write index register */	
-			while ((i < 4) && w7[i] == hp_sdc.r7[i]) i++;
+			/* Need to point the write index register */
+			while (i < 4 && w7[i] == hp_sdc.r7[i])
+				i++;
+
 			if (i < 4) {
 				hp_sdc_status_out8(HP_SDC_CMD_SET_D0 + i);
 				hp_sdc.wi = 0x70 + i;
 				goto finish;
 			}
+
 			idx++;
 			if ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_DATAREG)
 				goto actdone;
+
 			curr->idx = idx;
 			act &= ~HP_SDC_ACT_DATAREG;
 			break;
@@ -476,12 +515,13 @@ unsigned long hp_sdc_put(void) {
 		{
 			int i = 0;
 
-			while ((i < 4) && w7[i] == hp_sdc.r7[i]) i++;
+			while ((i < 4) && w7[i] == hp_sdc.r7[i])
+				i++;
 			if (i >= 4) {
 				curr->idx = idx + 1;
-				if ((act & HP_SDC_ACT_DURING) == 
+				if ((act & HP_SDC_ACT_DURING) ==
 				    HP_SDC_ACT_DATAREG)
-				        goto actdone;
+					goto actdone;
 			}
 		}
 		goto finish;
@@ -497,7 +537,7 @@ unsigned long hp_sdc_put(void) {
 
 
 	if (act & HP_SDC_ACT_POSTCMD) {
-	  	uint8_t postcmd;
+		uint8_t postcmd;
 
 		/* curr->idx should == idx at this point. */
 		postcmd = curr->seq[idx];
@@ -505,12 +545,12 @@ unsigned long hp_sdc_put(void) {
 		if (act & HP_SDC_ACT_DATAIN) {
 
 			/* Start a new read */
-	  		hp_sdc.rqty = curr->seq[curr->idx];
+			hp_sdc.rqty = curr->seq[curr->idx];
 			do_gettimeofday(&hp_sdc.rtv);
 			curr->idx++;
 			/* Still need to lock here in case of spurious irq. */
 			write_lock_irq(&hp_sdc.rtq_lock);
-			hp_sdc.rcurr = curridx; 
+			hp_sdc.rcurr = curridx;
 			write_unlock_irq(&hp_sdc.rtq_lock);
 			hp_sdc_status_out8(postcmd);
 			goto finish;
@@ -519,64 +559,69 @@ unsigned long hp_sdc_put(void) {
 		goto actdone;
 	}
 
-actdone:
-	if (act & HP_SDC_ACT_SEMAPHORE) {
+ actdone:
+	if (act & HP_SDC_ACT_SEMAPHORE)
 		up(curr->act.semaphore);
-	}
-	else if (act & HP_SDC_ACT_CALLBACK) {
+	else if (act & HP_SDC_ACT_CALLBACK)
 		curr->act.irqhook(0,NULL,0,0);
-	}
+
 	if (curr->idx >= curr->endidx) { /* This transaction is over. */
-		if (act & HP_SDC_ACT_DEALLOC) kfree(curr);
+		if (act & HP_SDC_ACT_DEALLOC)
+			kfree(curr);
 		hp_sdc.tq[curridx] = NULL;
-	}
-	else {
+	} else {
 		curr->actidx = idx + 1;
 		curr->idx = idx + 2;
 	}
 	/* Interleave outbound data between the transactions. */
 	hp_sdc.wcurr++;
-	if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN) hp_sdc.wcurr = 0;
+	if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+		hp_sdc.wcurr = 0;
 
  finish:
-	/* If by some quirk IBF has cleared and our ISR has run to 
+	/* If by some quirk IBF has cleared and our ISR has run to
 	   see that that has happened, do it all again. */
-	if (!hp_sdc.ibf && limit++ < 20) goto anew;
+	if (!hp_sdc.ibf && limit++ < 20)
+		goto anew;
 
  done:
-	if (hp_sdc.wcurr >= 0) tasklet_schedule(&hp_sdc.task);
+	if (hp_sdc.wcurr >= 0)
+		tasklet_schedule(&hp_sdc.task);
 	write_unlock(&hp_sdc.lock);
+
 	return 0;
 }
 
 /******* Functions called in either user or kernel context ****/
-int hp_sdc_enqueue_transaction(hp_sdc_transaction *this) {
+int hp_sdc_enqueue_transaction(hp_sdc_transaction *this)
+{
 	unsigned long flags;
 	int i;
 
 	if (this == NULL) {
 		tasklet_schedule(&hp_sdc.task);
 		return -EINVAL;
-	};
+	}
 
 	write_lock_irqsave(&hp_sdc.lock, flags);
 
 	/* Can't have same transaction on queue twice */
-	for (i=0; i < HP_SDC_QUEUE_LEN; i++)
-		if (hp_sdc.tq[i] == this) goto fail;
+	for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+		if (hp_sdc.tq[i] == this)
+			goto fail;
 
 	this->actidx = 0;
 	this->idx = 1;
 
 	/* Search for empty slot */
-	for (i=0; i < HP_SDC_QUEUE_LEN; i++) {
+	for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
 		if (hp_sdc.tq[i] == NULL) {
 			hp_sdc.tq[i] = this;
 			write_unlock_irqrestore(&hp_sdc.lock, flags);
 			tasklet_schedule(&hp_sdc.task);
 			return 0;
 		}
-	}
+
 	write_unlock_irqrestore(&hp_sdc.lock, flags);
 	printk(KERN_WARNING PREFIX "No free slot to add transaction.\n");
 	return -EBUSY;
@@ -587,7 +632,8 @@ int hp_sdc_enqueue_transaction(hp_sdc_transaction *this) {
 	return -EINVAL;
 }
 
-int hp_sdc_dequeue_transaction(hp_sdc_transaction *this) {
+int hp_sdc_dequeue_transaction(hp_sdc_transaction *this)
+{
 	unsigned long flags;
 	int i;
 
@@ -595,8 +641,9 @@ int hp_sdc_dequeue_transaction(hp_sdc_transaction *this) {
 
 	/* TODO: don't remove it if it's not done. */
 
-	for (i=0; i < HP_SDC_QUEUE_LEN; i++)
-		if (hp_sdc.tq[i] == this) hp_sdc.tq[i] = NULL;
+	for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+		if (hp_sdc.tq[i] == this)
+			hp_sdc.tq[i] = NULL;
 
 	write_unlock_irqrestore(&hp_sdc.lock, flags);
 	return 0;
@@ -605,11 +652,11 @@ int hp_sdc_dequeue_transaction(hp_sdc_transaction *this) {
 
 
 /********************** User context functions **************************/
-int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback) {
-
-	if (callback == NULL || hp_sdc.dev == NULL) {
+int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback)
+{
+	if (callback == NULL || hp_sdc.dev == NULL)
 		return -EINVAL;
-	}
+
 	write_lock_irq(&hp_sdc.hook_lock);
 	if (hp_sdc.timer != NULL) {
 		write_unlock_irq(&hp_sdc.hook_lock);
@@ -629,11 +676,11 @@ int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback) {
 	return 0;
 }
 
-int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback) {
-
-	if (callback == NULL || hp_sdc.dev == NULL) {
+int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback)
+{
+	if (callback == NULL || hp_sdc.dev == NULL)
 		return -EINVAL;
-	}
+
 	write_lock_irq(&hp_sdc.hook_lock);
 	if (hp_sdc.hil != NULL) {
 		write_unlock_irq(&hp_sdc.hook_lock);
@@ -650,11 +697,11 @@ int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback) {
 	return 0;
 }
 
-int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback) {
-
-	if (callback == NULL || hp_sdc.dev == NULL) {
+int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback)
+{
+	if (callback == NULL || hp_sdc.dev == NULL)
 		return -EINVAL;
-	}
+
 	write_lock_irq(&hp_sdc.hook_lock);
 	if (hp_sdc.cooked != NULL) {
 		write_unlock_irq(&hp_sdc.hook_lock);
@@ -672,9 +719,8 @@ int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback) {
 	return 0;
 }
 
-int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback) {
-
-
+int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback)
+{
 	write_lock_irq(&hp_sdc.hook_lock);
 	if ((callback != hp_sdc.timer) ||
 	    (hp_sdc.timer == NULL)) {
@@ -694,8 +740,8 @@ int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback) {
 	return 0;
 }
 
-int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback) {
-
+int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback)
+{
 	write_lock_irq(&hp_sdc.hook_lock);
 	if ((callback != hp_sdc.hil) ||
 	    (hp_sdc.hil == NULL)) {
@@ -715,8 +761,8 @@ int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback) {
 	return 0;
 }
 
-int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback) {
-
+int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback)
+{
 	write_lock_irq(&hp_sdc.hook_lock);
 	if ((callback != hp_sdc.cooked) ||
 	    (hp_sdc.cooked == NULL)) {
@@ -738,7 +784,8 @@ int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback) {
 
 /************************* Keepalive timer task *********************/
 
-void hp_sdc_kicker (unsigned long data) {
+void hp_sdc_kicker (unsigned long data)
+{
 	tasklet_schedule(&hp_sdc.task);
 	/* Re-insert the periodic task. */
 	mod_timer(&hp_sdc.kicker, jiffies + HZ);
@@ -750,10 +797,10 @@ void hp_sdc_kicker (unsigned long data) {
 
 static const struct parisc_device_id hp_sdc_tbl[] = {
 	{
-		.hw_type =	HPHW_FIO, 
+		.hw_type =	HPHW_FIO,
 		.hversion_rev =	HVERSION_REV_ANY_ID,
 		.hversion =	HVERSION_ANY_ID,
-		.sversion =	0x73, 
+		.sversion =	0x73,
 	 },
 	{ 0, }
 };
@@ -772,16 +819,15 @@ static struct parisc_driver hp_sdc_driver = {
 
 static int __init hp_sdc_init(void)
 {
-	int i;
 	char *errstr;
 	hp_sdc_transaction t_sync;
 	uint8_t ts_sync[6];
 	struct semaphore s_sync;
 
-  	rwlock_init(&hp_sdc.lock);
-  	rwlock_init(&hp_sdc.ibf_lock);
-  	rwlock_init(&hp_sdc.rtq_lock);
-  	rwlock_init(&hp_sdc.hook_lock);
+	rwlock_init(&hp_sdc.lock);
+	rwlock_init(&hp_sdc.ibf_lock);
+	rwlock_init(&hp_sdc.rtq_lock);
+	rwlock_init(&hp_sdc.hook_lock);
 
 	hp_sdc.timer		= NULL;
 	hp_sdc.hil		= NULL;
@@ -796,7 +842,8 @@ static int __init hp_sdc_init(void)
 	hp_sdc.r7[3]		= 0xff;
 	hp_sdc.ibf		= 1;
 
-	for (i = 0; i < HP_SDC_QUEUE_LEN; i++) hp_sdc.tq[i] = NULL;
+	memset(&hp_sdc.tq, 0, sizeof(hp_sdc.tq));
+
 	hp_sdc.wcurr		= -1;
         hp_sdc.rcurr		= -1;
 	hp_sdc.rqty		= 0;
@@ -804,27 +851,32 @@ static int __init hp_sdc_init(void)
 	hp_sdc.dev_err = -ENODEV;
 
 	errstr = "IO not found for";
-	if (!hp_sdc.base_io) goto err0;
+	if (!hp_sdc.base_io)
+		goto err0;
 
 	errstr = "IRQ not found for";
-	if (!hp_sdc.irq) goto err0;
+	if (!hp_sdc.irq)
+		goto err0;
 
 	hp_sdc.dev_err = -EBUSY;
 
 #if defined(__hppa__)
 	errstr = "IO not available for";
-        if (request_region(hp_sdc.data_io, 2, hp_sdc_driver.name)) goto err0;
-#endif	
+        if (request_region(hp_sdc.data_io, 2, hp_sdc_driver.name))
+		goto err0;
+#endif
 
 	errstr = "IRQ not available for";
 	if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED|IRQF_SAMPLE_RANDOM,
-		"HP SDC", &hp_sdc)) goto err1;
+			"HP SDC", &hp_sdc))
+		goto err1;
 
 	errstr = "NMI not available for";
 	if (request_irq(hp_sdc.nmi, &hp_sdc_nmisr, IRQF_SHARED,
-		"HP SDC NMI", &hp_sdc)) goto err2;
+			"HP SDC NMI", &hp_sdc))
+		goto err2;
 
-	printk(KERN_INFO PREFIX "HP SDC at 0x%p, IRQ %d (NMI IRQ %d)\n", 
+	printk(KERN_INFO PREFIX "HP SDC at 0x%p, IRQ %d (NMI IRQ %d)\n",
 	       (void *)hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
 
 	hp_sdc_status_in8();
@@ -858,9 +910,10 @@ static int __init hp_sdc_init(void)
  err1:
 	release_region(hp_sdc.data_io, 2);
  err0:
-	printk(KERN_WARNING PREFIX ": %s SDC IO=0x%p IRQ=0x%x NMI=0x%x\n", 
+	printk(KERN_WARNING PREFIX ": %s SDC IO=0x%p IRQ=0x%x NMI=0x%x\n",
 		errstr, (void *)hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
 	hp_sdc.dev = NULL;
+
 	return hp_sdc.dev_err;
 }
 
@@ -868,8 +921,10 @@ static int __init hp_sdc_init(void)
 
 static int __init hp_sdc_init_hppa(struct parisc_device *d)
 {
-	if (!d) return 1;
-	if (hp_sdc.dev != NULL) return 1;	/* We only expect one SDC */
+	if (!d)
+		return 1;
+	if (hp_sdc.dev != NULL)
+		return 1;	/* We only expect one SDC */
 
 	hp_sdc.dev		= d;
 	hp_sdc.irq		= d->irq;
@@ -906,10 +961,8 @@ static void hp_sdc_exit(void)
 
 	tasklet_kill(&hp_sdc.task);
 
-/*        release_region(hp_sdc.data_io, 2); */
-
 #if defined(__hppa__)
-	if (unregister_parisc_driver(&hp_sdc_driver)) 
+	if (unregister_parisc_driver(&hp_sdc_driver))
 		printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
 #endif
 }
@@ -923,7 +976,7 @@ static int __init hp_sdc_register(void)
 	mm_segment_t fs;
 	unsigned char i;
 #endif
-	
+
 	hp_sdc.dev = NULL;
 	hp_sdc.dev_err = 0;
 #if defined(__hppa__)
@@ -960,8 +1013,8 @@ static int __init hp_sdc_register(void)
 	tq_init.seq		= tq_init_seq;
 	tq_init.act.semaphore	= &tq_init_sem;
 
-	tq_init_seq[0] = 
-	  HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN | HP_SDC_ACT_SEMAPHORE;
+	tq_init_seq[0] =
+		HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN | HP_SDC_ACT_SEMAPHORE;
 	tq_init_seq[1] = HP_SDC_CMD_READ_KCC;
 	tq_init_seq[2] = 1;
 	tq_init_seq[3] = 0;
@@ -979,13 +1032,13 @@ static int __init hp_sdc_register(void)
 	}
 	hp_sdc.r11 = tq_init_seq[4];
 	if (hp_sdc.r11 & HP_SDC_CFG_NEW) {
-		char *str;
+		const char *str;
 		printk(KERN_INFO PREFIX "New style SDC\n");
 		tq_init_seq[1] = HP_SDC_CMD_READ_XTD;
 		tq_init.actidx		= 0;
 		tq_init.idx		= 1;
 		down(&tq_init_sem);
-		hp_sdc_enqueue_transaction(&tq_init);		
+		hp_sdc_enqueue_transaction(&tq_init);
 		down(&tq_init_sem);
 		up(&tq_init_sem);
 		if ((tq_init_seq[0] & HP_SDC_ACT_DEAD) == HP_SDC_ACT_DEAD) {
@@ -995,15 +1048,13 @@ static int __init hp_sdc_register(void)
 		hp_sdc.r7e = tq_init_seq[4];
 		HP_SDC_XTD_REV_STRINGS(hp_sdc.r7e & HP_SDC_XTD_REV, str)
 		printk(KERN_INFO PREFIX "Revision: %s\n", str);
-		if (hp_sdc.r7e & HP_SDC_XTD_BEEPER) {
+		if (hp_sdc.r7e & HP_SDC_XTD_BEEPER)
 			printk(KERN_INFO PREFIX "TI SN76494 beeper present\n");
-		}
-		if (hp_sdc.r7e & HP_SDC_XTD_BBRTC) {
+		if (hp_sdc.r7e & HP_SDC_XTD_BBRTC)
 			printk(KERN_INFO PREFIX "OKI MSM-58321 BBRTC present\n");
-		}
 		printk(KERN_INFO PREFIX "Spunking the self test register to force PUP "
 		       "on next firmware reset.\n");
-		tq_init_seq[0] = HP_SDC_ACT_PRECMD | 
+		tq_init_seq[0] = HP_SDC_ACT_PRECMD |
 			HP_SDC_ACT_DATAOUT | HP_SDC_ACT_SEMAPHORE;
 		tq_init_seq[1] = HP_SDC_CMD_SET_STR;
 		tq_init_seq[2] = 1;
@@ -1012,14 +1063,12 @@ static int __init hp_sdc_register(void)
 		tq_init.idx		= 1;
 		tq_init.endidx		= 4;
 		down(&tq_init_sem);
-		hp_sdc_enqueue_transaction(&tq_init);		
+		hp_sdc_enqueue_transaction(&tq_init);
 		down(&tq_init_sem);
 		up(&tq_init_sem);
-	}
-	else {
-		printk(KERN_INFO PREFIX "Old style SDC (1820-%s).\n", 
+	} else
+		printk(KERN_INFO PREFIX "Old style SDC (1820-%s).\n",
 		       (hp_sdc.r11 & HP_SDC_CFG_REV) ? "3300" : "2564/3087");
-	}
 
         return 0;
 }
@@ -1027,13 +1076,13 @@ static int __init hp_sdc_register(void)
 module_init(hp_sdc_register);
 module_exit(hp_sdc_exit);
 
-/* Timing notes:  These measurements taken on my 64MHz 7100-LC (715/64) 
+/* Timing notes:  These measurements taken on my 64MHz 7100-LC (715/64)
  *                                              cycles cycles-adj    time
  * between two consecutive mfctl(16)'s:              4        n/a    63ns
  * hp_sdc_spin_ibf when idle:                      119        115   1.7us
  * gsc_writeb status register:                      83         79   1.2us
  * IBF to clear after sending SET_IM:             6204       6006    93us
- * IBF to clear after sending LOAD_RT:            4467       4352    68us  
+ * IBF to clear after sending LOAD_RT:            4467       4352    68us
  * IBF to clear after sending two LOAD_RTs:      18974      18859   295us
  * READ_T1, read status/data, IRQ, call handler: 35564        n/a   556us
  * cmd to ~IBF READ_T1 2nd time right after:   5158403        n/a    81ms