IB/iser: Avoid recv buffer exhaustion caused by unexpected PDUs

iSCSI/iSER targets may send PDUs without a prior request from the
initiator.  RFC 5046 refers to these PDUs as "unexpected".  NOP-In PDUs
with itt=RESERVED and Asynchronous Message PDUs occupy this category.

The amount of active "unexpected" PDU's an iSER target may have at any
time is governed by the MaxOutstandingUnexpectedPDUs key, which is not
yet supported.

Currently when an iSER target sends an "unexpected" PDU, the
initiators recv buffer consumed by the PDU is not replaced.  If over
initial_post_recv_bufs_num "unexpected" PDUs are received then the
receive queue will run out of receive work requests entirely.

This patch ensures recv buffers consumed by "unexpected" PDUs are
replaced in the next iser_post_receive_control() call.

Signed-off-by: David Disseldorp <ddiss@sgi.com>
Signed-off-by: Ken Sandars <ksandars@sgi.com>
Acked-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 91 insertions, 41 deletions

diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index cdd283189047..ed1aff21b7ea 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -183,14 +183,8 @@ static int iser_post_receive_control(struct iscsi_conn *conn)
 	struct iser_regd_buf *regd_data;
 	struct iser_dto      *recv_dto = NULL;
 	struct iser_device  *device = iser_conn->ib_conn->device;
-	int rx_data_size, err = 0;
-
-	rx_desc = kmem_cache_alloc(ig.desc_cache, GFP_NOIO);
-	if (rx_desc == NULL) {
-		iser_err("Failed to alloc desc for post recv\n");
-		return -ENOMEM;
-	}
-	rx_desc->type = ISCSI_RX;
+	int rx_data_size, err;
+	int posts, outstanding_unexp_pdus;
 
 	/* for the login sequence we must support rx of upto 8K; login is done
 	 * after conn create/bind (connect) and conn stop/bind (reconnect),
@@ -201,46 +195,80 @@ static int iser_post_receive_control(struct iscsi_conn *conn)
 	else /* FIXME till user space sets conn->max_recv_dlength correctly */
 		rx_data_size = 128;
 
-	rx_desc->data = kmalloc(rx_data_size, GFP_NOIO);
-	if (rx_desc->data == NULL) {
-		iser_err("Failed to alloc data buf for post recv\n");
-		err = -ENOMEM;
-		goto post_rx_kmalloc_failure;
-	}
+	outstanding_unexp_pdus =
+		atomic_xchg(&iser_conn->ib_conn->unexpected_pdu_count, 0);
 
-	recv_dto = &rx_desc->dto;
-	recv_dto->ib_conn = iser_conn->ib_conn;
-	recv_dto->regd_vector_len = 0;
+	/*
+	 * in addition to the response buffer, replace those consumed by
+	 * unexpected pdus.
+	 */
+	for (posts = 0; posts < 1 + outstanding_unexp_pdus; posts++) {
+		rx_desc = kmem_cache_alloc(ig.desc_cache, GFP_NOIO);
+		if (rx_desc == NULL) {
+			iser_err("Failed to alloc desc for post recv %d\n",
+				 posts);
+			err = -ENOMEM;
+			goto post_rx_cache_alloc_failure;
+		}
+		rx_desc->type = ISCSI_RX;
+		rx_desc->data = kmalloc(rx_data_size, GFP_NOIO);
+		if (rx_desc->data == NULL) {
+			iser_err("Failed to alloc data buf for post recv %d\n",
+				 posts);
+			err = -ENOMEM;
+			goto post_rx_kmalloc_failure;
+		}
 
-	regd_hdr = &rx_desc->hdr_regd_buf;
-	memset(regd_hdr, 0, sizeof(struct iser_regd_buf));
-	regd_hdr->device  = device;
-	regd_hdr->virt_addr  = rx_desc; /* == &rx_desc->iser_header */
-	regd_hdr->data_size  = ISER_TOTAL_HEADERS_LEN;
+		recv_dto = &rx_desc->dto;
+		recv_dto->ib_conn = iser_conn->ib_conn;
+		recv_dto->regd_vector_len = 0;
 
-	iser_reg_single(device, regd_hdr, DMA_FROM_DEVICE);
+		regd_hdr = &rx_desc->hdr_regd_buf;
+		memset(regd_hdr, 0, sizeof(struct iser_regd_buf));
+		regd_hdr->device  = device;
+		regd_hdr->virt_addr  = rx_desc; /* == &rx_desc->iser_header */
+		regd_hdr->data_size  = ISER_TOTAL_HEADERS_LEN;
 
-	iser_dto_add_regd_buff(recv_dto, regd_hdr, 0, 0);
+		iser_reg_single(device, regd_hdr, DMA_FROM_DEVICE);
 
-	regd_data = &rx_desc->data_regd_buf;
-	memset(regd_data, 0, sizeof(struct iser_regd_buf));
-	regd_data->device  = device;
-	regd_data->virt_addr  = rx_desc->data;
-	regd_data->data_size  = rx_data_size;
+		iser_dto_add_regd_buff(recv_dto, regd_hdr, 0, 0);
 
-	iser_reg_single(device, regd_data, DMA_FROM_DEVICE);
+		regd_data = &rx_desc->data_regd_buf;
+		memset(regd_data, 0, sizeof(struct iser_regd_buf));
+		regd_data->device  = device;
+		regd_data->virt_addr  = rx_desc->data;
+		regd_data->data_size  = rx_data_size;
 
-	iser_dto_add_regd_buff(recv_dto, regd_data, 0, 0);
+		iser_reg_single(device, regd_data, DMA_FROM_DEVICE);
 
-	err = iser_post_recv(rx_desc);
-	if (!err)
-		return 0;
+		iser_dto_add_regd_buff(recv_dto, regd_data, 0, 0);
 
-	/* iser_post_recv failed */
+		err = iser_post_recv(rx_desc);
+		if (err) {
+			iser_err("Failed iser_post_recv for post %d\n", posts);
+			goto post_rx_post_recv_failure;
+		}
+	}
+	/* all posts successful */
+	return 0;
+
+post_rx_post_recv_failure:
 	iser_dto_buffs_release(recv_dto);
 	kfree(rx_desc->data);
 post_rx_kmalloc_failure:
 	kmem_cache_free(ig.desc_cache, rx_desc);
+post_rx_cache_alloc_failure:
+	if (posts > 0) {
+		/*
+		 * response buffer posted, but did not replace all unexpected
+		 * pdu recv bufs. Ignore error, retry occurs next send
+		 */
+		outstanding_unexp_pdus -= (posts - 1);
+		err = 0;
+	}
+	atomic_add(outstanding_unexp_pdus,
+		   &iser_conn->ib_conn->unexpected_pdu_count);
+
 	return err;
 }
 
@@ -274,8 +302,10 @@ int iser_conn_set_full_featured_mode(struct iscsi_conn *conn)
 	struct iscsi_iser_conn *iser_conn = conn->dd_data;
 
 	int i;
-	/* no need to keep it in a var, we are after login so if this should
-	 * be negotiated, by now the result should be available here */
+	/*
+	 * FIXME this value should be declared to the target during login with
+	 * the MaxOutstandingUnexpectedPDUs key when supported
+	 */
 	int initial_post_recv_bufs_num = ISER_MAX_RX_MISC_PDUS;
 
 	iser_dbg("Initially post: %d\n", initial_post_recv_bufs_num);
@@ -478,6 +508,7 @@ int iser_send_control(struct iscsi_conn *conn,
 	int err = 0;
 	struct iser_regd_buf *regd_buf;
 	struct iser_device *device;
+	unsigned char opcode;
 
 	if (!iser_conn_state_comp(iser_conn->ib_conn, ISER_CONN_UP)) {
 		iser_err("Failed to send, conn: 0x%p is not up\n", iser_conn->ib_conn);
@@ -512,10 +543,15 @@ int iser_send_control(struct iscsi_conn *conn,
 				       data_seg_len);
 	}
 
-	if (iser_post_receive_control(conn) != 0) {
-		iser_err("post_rcv_buff failed!\n");
-		err = -ENOMEM;
-		goto send_control_error;
+	opcode = task->hdr->opcode & ISCSI_OPCODE_MASK;
+
+	/* post recv buffer for response if one is expected */
+	if (!(opcode == ISCSI_OP_NOOP_OUT && task->hdr->itt == RESERVED_ITT)) {
+		if (iser_post_receive_control(conn) != 0) {
+			iser_err("post_rcv_buff failed!\n");
+			err = -ENOMEM;
+			goto send_control_error;
+		}
 	}
 
 	err = iser_post_send(mdesc);
@@ -586,6 +622,20 @@ void iser_rcv_completion(struct iser_desc *rx_desc,
 	 * parallel to the execution of iser_conn_term. So the code that waits *
 	 * for the posted rx bufs refcount to become zero handles everything   */
 	atomic_dec(&conn->ib_conn->post_recv_buf_count);
+
+	/*
+	 * if an unexpected PDU was received then the recv wr consumed must
+	 * be replaced, this is done in the next send of a control-type PDU
+	 */
+	if (opcode == ISCSI_OP_NOOP_IN && hdr->itt == RESERVED_ITT) {
+		/* nop-in with itt = 0xffffffff */
+		atomic_inc(&conn->ib_conn->unexpected_pdu_count);
+	}
+	else if (opcode == ISCSI_OP_ASYNC_EVENT) {
+		/* asyncronous message */
+		atomic_inc(&conn->ib_conn->unexpected_pdu_count);
+	}
+	/* a reject PDU consumes the recv buf posted for the response */
 }
 
 void iser_snd_completion(struct iser_desc *tx_desc)