Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.6-rc1.

  Lots of little things here, over 1600 patches or so.  Notable is all
  of the good Lustre work happening, those developers have finally woken
  up and are cleaning up their code greatly.  The Outreachy intern
  application process is also happening, which brought in another 400 or
  so patches.  Full details are in the very long shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
  staging: lustre: fix aligments in lnet selftest
  staging: lustre: report minimum of two buffers for LNet selftest load test
  staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
  staging: lustre: filter remaining extra spacing for lnet selftest
  staging: lustre: remove extra spacing when setting variable for lnet selftest
  staging: lustre: remove extra spacing of variable declartions for lnet selftest
  staging: lustre: fix spacing issues checkpatch reported in lnet selftest
  staging: lustre: remove returns in void function for lnet selftest
  staging: lustre: fix bogus lst errors for lnet selftest
  staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
  staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
  staging: android: ion: fix up file mode
  staging: ion: debugfs invalid gfp mask
  staging: rts5208: Replace pci_enable_device with pcim_enable_device
  Staging: ieee80211: Place constant on right side of the test.
  staging: speakup: Replace del_timer with del_timer_sync
  staging: lowmemorykiller: fix 2 checks that checkpatch complained
  staging: mt29f_spinand: Drop void pointer cast
  staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
  staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
  ...

13 files changed, 398 insertions, 71 deletions

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 6f2e7c9ac23e..31c0e1fd2202 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -10,11 +10,11 @@ config BMP280
 	depends on I2C
 	select REGMAP_I2C
 	help
-	 Say yes here to build support for Bosch Sensortec BMP280
-	 pressure and temperature sensor.
+	  Say yes here to build support for Bosch Sensortec BMP280
+	  pressure and temperature sensor.
 
-	 To compile this driver as a module, choose M here: the module
-	 will be called bmp280.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bmp280.
 
 config HID_SENSOR_PRESS
 	depends on HID_SENSOR_HUB
@@ -27,18 +27,33 @@ config HID_SENSOR_PRESS
 	  Say yes here to build support for the HID SENSOR
 	  Pressure driver
 
-          To compile this driver as a module, choose M here: the module
-          will be called hid-sensor-press.
+	  To compile this driver as a module, choose M here: the module
+	  will be called hid-sensor-press.
 
 config MPL115
+	tristate
+
+config MPL115_I2C
 	tristate "Freescale MPL115A2 pressure sensor driver"
 	depends on I2C
+	select MPL115
 	help
 	  Say yes here to build support for the Freescale MPL115A2
 	  pressure sensor connected via I2C.
 
-          To compile this driver as a module, choose M here: the module
-          will be called mpl115.
+	  To compile this driver as a module, choose M here: the module
+	  will be called mpl115_i2c.
+
+config MPL115_SPI
+	tristate "Freescale MPL115A1 pressure sensor driver"
+	depends on SPI_MASTER
+	select MPL115
+	help
+	  Say yes here to build support for the Freescale MPL115A1
+	  pressure sensor connected via SPI.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mpl115_spi.
 
 config MPL3115
 	tristate "Freescale MPL3115A2 pressure sensor driver"
@@ -49,11 +64,13 @@ config MPL3115
 	  Say yes here to build support for the Freescale MPL3115A2
 	  pressure sensor / altimeter.
 
-          To compile this driver as a module, choose M here: the module
-          will be called mpl3115.
+	  To compile this driver as a module, choose M here: the module
+	  will be called mpl3115.
 
 config MS5611
 	tristate "Measurement Specialties MS5611 pressure sensor driver"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to build support for the Measurement Specialties
 	  MS5611, MS5607 pressure and temperature sensors.
@@ -82,7 +99,7 @@ config MS5611_SPI
 config MS5637
 	tristate "Measurement Specialties MS5637 pressure & temperature sensor"
 	depends on I2C
-        select IIO_MS_SENSORS_I2C
+	select IIO_MS_SENSORS_I2C
 	help
 	  If you say yes here you get support for the Measurement Specialties
 	  MS5637 pressure and temperature sensor.
@@ -128,7 +145,7 @@ config T5403
 	  Say yes here to build support for the EPCOS T5403 pressure sensor
 	  connected via I2C.
 
-          To compile this driver as a module, choose M here: the module
-          will be called t5403.
+	  To compile this driver as a module, choose M here: the module
+	  will be called t5403.
 
 endmenu
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 46571c96823f..d336af14f3fe 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -6,6 +6,8 @@
 obj-$(CONFIG_BMP280) += bmp280.o
 obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
 obj-$(CONFIG_MPL115) += mpl115.o
+obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
+obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
 obj-$(CONFIG_MPL3115) += mpl3115.o
 obj-$(CONFIG_MS5611) += ms5611_core.o
 obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c
index a0d7deeac62f..73f2f0c46e62 100644
--- a/drivers/iio/pressure/mpl115.c
+++ b/drivers/iio/pressure/mpl115.c
@@ -1,5 +1,5 @@
 /*
- * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor
+ * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor
  *
  * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
  *
@@ -7,17 +7,16 @@
  * the GNU General Public License.  See the file COPYING in the main
  * directory of this archive for more details.
  *
- * (7-bit I2C slave address 0x60)
- *
  * TODO: shutdown pin
  *
  */
 
 #include <linux/module.h>
-#include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/delay.h>
 
+#include "mpl115.h"
+
 #define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */
 #define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */
 #define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */
@@ -27,16 +26,18 @@
 #define MPL115_CONVERT 0x12 /* convert temperature and pressure */
 
 struct mpl115_data {
-	struct i2c_client *client;
+	struct device *dev;
 	struct mutex lock;
 	s16 a0;
 	s16 b1, b2;
 	s16 c12;
+	const struct mpl115_ops *ops;
 };
 
 static int mpl115_request(struct mpl115_data *data)
 {
-	int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0);
+	int ret = data->ops->write(data->dev, MPL115_CONVERT, 0);
+
 	if (ret < 0)
 		return ret;
 
@@ -57,12 +58,12 @@ static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2)
 	if (ret < 0)
 		goto done;
 
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC);
+	ret = data->ops->read(data->dev, MPL115_PADC);
 	if (ret < 0)
 		goto done;
 	padc = ret >> 6;
 
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+	ret = data->ops->read(data->dev, MPL115_TADC);
 	if (ret < 0)
 		goto done;
 	tadc = ret >> 6;
@@ -90,7 +91,7 @@ static int mpl115_read_temp(struct mpl115_data *data)
 	ret = mpl115_request(data);
 	if (ret < 0)
 		goto done;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC);
+	ret = data->ops->read(data->dev, MPL115_TADC);
 done:
 	mutex_unlock(&data->lock);
 	return ret;
@@ -145,66 +146,53 @@ static const struct iio_info mpl115_info = {
 	.driver_module = THIS_MODULE,
 };
 
-static int mpl115_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+int mpl115_probe(struct device *dev, const char *name,
+			const struct mpl115_ops *ops)
 {
 	struct mpl115_data *data;
 	struct iio_dev *indio_dev;
 	int ret;
 
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
-
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	data = iio_priv(indio_dev);
-	data->client = client;
+	data->dev = dev;
+	data->ops = ops;
 	mutex_init(&data->lock);
 
-	i2c_set_clientdata(client, indio_dev);
 	indio_dev->info = &mpl115_info;
-	indio_dev->name = id->name;
-	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = name;
+	indio_dev->dev.parent = dev;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = mpl115_channels;
 	indio_dev->num_channels = ARRAY_SIZE(mpl115_channels);
 
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0);
+	ret = data->ops->init(data->dev);
+	if (ret)
+		return ret;
+
+	ret = data->ops->read(data->dev, MPL115_A0);
 	if (ret < 0)
 		return ret;
 	data->a0 = ret;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1);
+	ret = data->ops->read(data->dev, MPL115_B1);
 	if (ret < 0)
 		return ret;
 	data->b1 = ret;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2);
+	ret = data->ops->read(data->dev, MPL115_B2);
 	if (ret < 0)
 		return ret;
 	data->b2 = ret;
-	ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12);
+	ret = data->ops->read(data->dev, MPL115_C12);
 	if (ret < 0)
 		return ret;
 	data->c12 = ret;
 
-	return devm_iio_device_register(&client->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
-
-static const struct i2c_device_id mpl115_id[] = {
-	{ "mpl115", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mpl115_id);
-
-static struct i2c_driver mpl115_driver = {
-	.driver = {
-		.name	= "mpl115",
-	},
-	.probe = mpl115_probe,
-	.id_table = mpl115_id,
-};
-module_i2c_driver(mpl115_driver);
+EXPORT_SYMBOL_GPL(mpl115_probe);
 
 MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
 MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver");
diff --git a/drivers/iio/pressure/mpl115.h b/drivers/iio/pressure/mpl115.h
new file mode 100644
index 000000000000..01b652774dc3
--- /dev/null
+++ b/drivers/iio/pressure/mpl115.h
@@ -0,0 +1,24 @@
+/*
+ * Freescale MPL115A pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ */
+
+#ifndef _MPL115_H_
+#define _MPL115_H_
+
+struct mpl115_ops {
+	int (*init)(struct device *);
+	int (*read)(struct device *, u8);
+	int (*write)(struct device *, u8, u8);
+};
+
+int mpl115_probe(struct device *dev, const char *name,
+			const struct mpl115_ops *ops);
+
+#endif
diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c
new file mode 100644
index 000000000000..1a29be462f6e
--- /dev/null
+++ b/drivers/iio/pressure/mpl115_i2c.c
@@ -0,0 +1,67 @@
+/*
+ * Freescale MPL115A2 pressure/temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x60)
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#include "mpl115.h"
+
+static int mpl115_i2c_init(struct device *dev)
+{
+	return 0;
+}
+
+static int mpl115_i2c_read(struct device *dev, u8 address)
+{
+	return i2c_smbus_read_word_swapped(to_i2c_client(dev), address);
+}
+
+static int mpl115_i2c_write(struct device *dev, u8 address, u8 value)
+{
+	return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value);
+}
+
+static const struct mpl115_ops mpl115_i2c_ops = {
+	.init = mpl115_i2c_init,
+	.read = mpl115_i2c_read,
+	.write = mpl115_i2c_write,
+};
+
+static int mpl115_i2c_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EOPNOTSUPP;
+
+	return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops);
+}
+
+static const struct i2c_device_id mpl115_i2c_id[] = {
+	{ "mpl115", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id);
+
+static struct i2c_driver mpl115_i2c_driver = {
+	.driver = {
+		.name	= "mpl115",
+	},
+	.probe = mpl115_i2c_probe,
+	.id_table = mpl115_i2c_id,
+};
+module_i2c_driver(mpl115_i2c_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/mpl115_spi.c b/drivers/iio/pressure/mpl115_spi.c
new file mode 100644
index 000000000000..9ebf55f5b3aa
--- /dev/null
+++ b/drivers/iio/pressure/mpl115_spi.c
@@ -0,0 +1,106 @@
+/*
+ * Freescale MPL115A1 pressure/temperature sensor
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "mpl115.h"
+
+#define MPL115_SPI_WRITE(address)	((address) << 1)
+#define MPL115_SPI_READ(address)	(0x80 | (address) << 1)
+
+struct mpl115_spi_buf {
+	u8 tx[4];
+	u8 rx[4];
+};
+
+static int mpl115_spi_init(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpl115_spi_buf *buf;
+
+	buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, buf);
+
+	return 0;
+}
+
+static int mpl115_spi_read(struct device *dev, u8 address)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+	struct spi_transfer xfer = {
+		.tx_buf = buf->tx,
+		.rx_buf = buf->rx,
+		.len = 4,
+	};
+	int ret;
+
+	buf->tx[0] = MPL115_SPI_READ(address);
+	buf->tx[2] = MPL115_SPI_READ(address + 1);
+
+	ret = spi_sync_transfer(spi, &xfer, 1);
+	if (ret)
+		return ret;
+
+	return (buf->rx[1] << 8) | buf->rx[3];
+}
+
+static int mpl115_spi_write(struct device *dev, u8 address, u8 value)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpl115_spi_buf *buf = spi_get_drvdata(spi);
+	struct spi_transfer xfer = {
+		.tx_buf = buf->tx,
+		.len = 2,
+	};
+
+	buf->tx[0] = MPL115_SPI_WRITE(address);
+	buf->tx[1] = value;
+
+	return spi_sync_transfer(spi, &xfer, 1);
+}
+
+static const struct mpl115_ops mpl115_spi_ops = {
+	.init = mpl115_spi_init,
+	.read = mpl115_spi_read,
+	.write = mpl115_spi_write,
+};
+
+static int mpl115_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops);
+}
+
+static const struct spi_device_id mpl115_spi_ids[] = {
+	{ "mpl115", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, mpl115_spi_ids);
+
+static struct spi_driver mpl115_spi_driver = {
+	.driver = {
+		.name   = "mpl115",
+	},
+	.probe = mpl115_spi_probe,
+	.id_table = mpl115_spi_ids,
+};
+module_spi_driver(mpl115_spi_driver);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h
index 23b93c797dba..8b08e4b7e3a9 100644
--- a/drivers/iio/pressure/ms5611.h
+++ b/drivers/iio/pressure/ms5611.h
@@ -51,6 +51,8 @@ struct ms5611_state {
 	struct ms5611_chip_info *chip_info;
 };
 
-int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type);
+int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
+                 const char* name, int type);
+int ms5611_remove(struct iio_dev *indio_dev);
 
 #endif /* _MS5611_H */
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
index 2f3d9b4aca4e..992ad8d3b67a 100644
--- a/drivers/iio/pressure/ms5611_core.c
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -16,7 +16,11 @@
 #include <linux/module.h>
 #include <linux/iio/iio.h>
 #include <linux/delay.h>
+#include <linux/regulator/consumer.h>
 
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
 #include "ms5611.h"
 
 static bool ms5611_prom_is_valid(u16 *prom, size_t len)
@@ -133,17 +137,17 @@ static int ms5607_temp_and_pressure_compensate(struct ms5611_chip_info *chip_inf
 
 	t = 2000 + ((chip_info->prom[6] * dt) >> 23);
 	if (t < 2000) {
-		s64 off2, sens2, t2;
+		s64 off2, sens2, t2, tmp;
 
 		t2 = (dt * dt) >> 31;
-		off2 = (61 * (t - 2000) * (t - 2000)) >> 4;
-		sens2 = off2 << 1;
+		tmp = (t - 2000) * (t - 2000);
+		off2 = (61 * tmp) >> 4;
+		sens2 = tmp << 1;
 
 		if (t < -1500) {
-			s64 tmp = (t + 1500) * (t + 1500);
-
+			tmp = (t + 1500) * (t + 1500);
 			off2 += 15 * tmp;
-			sens2 += (8 * tmp);
+			sens2 += 8 * tmp;
 		}
 
 		t -= t2;
@@ -173,6 +177,28 @@ static int ms5611_reset(struct iio_dev *indio_dev)
 	return 0;
 }
 
+static irqreturn_t ms5611_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ms5611_state *st = iio_priv(indio_dev);
+	s32 buf[4]; /* s32 (pressure) + s32 (temp) + 2 * s32 (timestamp) */
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = ms5611_read_temp_and_pressure(indio_dev, &buf[1], &buf[0]);
+	mutex_unlock(&st->lock);
+	if (ret < 0)
+		goto err;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
 static int ms5611_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan,
 			   int *val, int *val2, long mask)
@@ -201,11 +227,25 @@ static int ms5611_read_raw(struct iio_dev *indio_dev,
 		default:
 			return -EINVAL;
 		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = 10;
+			return IIO_VAL_INT;
+		case IIO_PRESSURE:
+			*val = 0;
+			*val2 = 1000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
 	}
 
 	return -EINVAL;
 }
 
+static const unsigned long ms5611_scan_masks[] = {0x3, 0};
+
 static struct ms5611_chip_info chip_info_tbl[] = {
 	[MS5611] = {
 		.temp_and_pressure_compensate = ms5611_temp_and_pressure_compensate,
@@ -218,12 +258,29 @@ static struct ms5611_chip_info chip_info_tbl[] = {
 static const struct iio_chan_spec ms5611_channels[] = {
 	{
 		.type = IIO_PRESSURE,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_CPU,
+		},
 	},
 	{
 		.type = IIO_TEMP,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
-	}
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_CPU,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
 };
 
 static const struct iio_info ms5611_info = {
@@ -234,6 +291,18 @@ static const struct iio_info ms5611_info = {
 static int ms5611_init(struct iio_dev *indio_dev)
 {
 	int ret;
+	struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
+	                                           "vdd");
+
+	/* Enable attached regulator if any. */
+	if (!IS_ERR(vdd)) {
+		ret = regulator_enable(vdd);
+		if (ret) {
+			dev_err(indio_dev->dev.parent,
+			        "failed to enable Vdd supply: %d\n", ret);
+			return ret;
+		}
+	}
 
 	ret = ms5611_reset(indio_dev);
 	if (ret < 0)
@@ -242,7 +311,8 @@ static int ms5611_init(struct iio_dev *indio_dev)
 	return ms5611_read_prom(indio_dev);
 }
 
-int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type)
+int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
+                 const char *name, int type)
 {
 	int ret;
 	struct ms5611_state *st = iio_priv(indio_dev);
@@ -250,20 +320,48 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev, int type)
 	mutex_init(&st->lock);
 	st->chip_info = &chip_info_tbl[type];
 	indio_dev->dev.parent = dev;
-	indio_dev->name = dev->driver->name;
+	indio_dev->name = name;
 	indio_dev->info = &ms5611_info;
 	indio_dev->channels = ms5611_channels;
 	indio_dev->num_channels = ARRAY_SIZE(ms5611_channels);
 	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->available_scan_masks = ms5611_scan_masks;
 
 	ret = ms5611_init(indio_dev);
 	if (ret < 0)
 		return ret;
 
-	return devm_iio_device_register(dev, indio_dev);
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 ms5611_trigger_handler, NULL);
+	if (ret < 0) {
+		dev_err(dev, "iio triggered buffer setup failed\n");
+		return ret;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(dev, "unable to register iio device\n");
+		goto err_buffer_cleanup;
+	}
+
+	return 0;
+
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
 }
 EXPORT_SYMBOL(ms5611_probe);
 
+int ms5611_remove(struct iio_dev *indio_dev)
+{
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return 0;
+}
+EXPORT_SYMBOL(ms5611_remove);
+
 MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
 MODULE_DESCRIPTION("MS5611 core driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
index 245797d1ecf0..7f6fc8eee922 100644
--- a/drivers/iio/pressure/ms5611_i2c.c
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -92,19 +92,25 @@ static int ms5611_i2c_probe(struct i2c_client *client,
 				     I2C_FUNC_SMBUS_WRITE_BYTE |
 				     I2C_FUNC_SMBUS_READ_WORD_DATA |
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;
 
 	st = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
 	st->reset = ms5611_i2c_reset;
 	st->read_prom_word = ms5611_i2c_read_prom_word;
 	st->read_adc_temp_and_pressure = ms5611_i2c_read_adc_temp_and_pressure;
 	st->client = client;
 
-	return ms5611_probe(indio_dev, &client->dev, id->driver_data);
+	return ms5611_probe(indio_dev, &client->dev, id->name, id->driver_data);
+}
+
+static int ms5611_i2c_remove(struct i2c_client *client)
+{
+	return ms5611_remove(i2c_get_clientdata(client));
 }
 
 static const struct i2c_device_id ms5611_id[] = {
@@ -120,6 +126,7 @@ static struct i2c_driver ms5611_driver = {
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_i2c_probe,
+	.remove = ms5611_i2c_remove,
 };
 module_i2c_driver(ms5611_driver);
 
diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
index aaa0c4ba91a7..5cc009e85f0e 100644
--- a/drivers/iio/pressure/ms5611_spi.c
+++ b/drivers/iio/pressure/ms5611_spi.c
@@ -90,6 +90,8 @@ static int ms5611_spi_probe(struct spi_device *spi)
 	if (!indio_dev)
 		return -ENOMEM;
 
+	spi_set_drvdata(spi, indio_dev);
+
 	spi->mode = SPI_MODE_0;
 	spi->max_speed_hz = 20000000;
 	spi->bits_per_word = 8;
@@ -103,8 +105,13 @@ static int ms5611_spi_probe(struct spi_device *spi)
 	st->read_adc_temp_and_pressure = ms5611_spi_read_adc_temp_and_pressure;
 	st->client = spi;
 
-	return ms5611_probe(indio_dev, &spi->dev,
-			    spi_get_device_id(spi)->driver_data);
+	return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name,
+	                    spi_get_device_id(spi)->driver_data);
+}
+
+static int ms5611_spi_remove(struct spi_device *spi)
+{
+	return ms5611_remove(spi_get_drvdata(spi));
 }
 
 static const struct spi_device_id ms5611_id[] = {
@@ -120,6 +127,7 @@ static struct spi_driver ms5611_driver = {
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_spi_probe,
+	.remove = ms5611_spi_remove,
 };
 module_spi_driver(ms5611_driver);
 
diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c
index e8d0e0da938d..e68052c118e6 100644
--- a/drivers/iio/pressure/ms5637.c
+++ b/drivers/iio/pressure/ms5637.c
@@ -136,7 +136,7 @@ static int ms5637_probe(struct i2c_client *client,
 				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 		dev_err(&client->dev,
 			"Adapter does not support some i2c transaction\n");
-		return -ENODEV;
+		return -EOPNOTSUPP;
 	}
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index b39a2fb0671c..172393ad34af 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -62,6 +62,8 @@
 #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR		0x22
 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK	0x04
 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK	0x20
+#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR		0x22
+#define ST_PRESS_LPS331AP_IHL_IRQ_MASK		0x80
 #define ST_PRESS_LPS331AP_MULTIREAD_BIT		true
 #define ST_PRESS_LPS331AP_TEMP_OFFSET		42500
 
@@ -100,6 +102,8 @@
 #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR		0x23
 #define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK	0x01
 #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK	0x10
+#define ST_PRESS_LPS25H_IHL_IRQ_ADDR		0x22
+#define ST_PRESS_LPS25H_IHL_IRQ_MASK		0x80
 #define ST_PRESS_LPS25H_MULTIREAD_BIT		true
 #define ST_PRESS_LPS25H_TEMP_OFFSET		42500
 #define ST_PRESS_LPS25H_OUT_XL_ADDR		0x28
@@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
+			.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
 		.bootime = 2,
@@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
 			.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
 			.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
+			.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
 		},
 		.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
 		.bootime = 2,
diff --git a/drivers/iio/pressure/t5403.c b/drivers/iio/pressure/t5403.c
index e11cd3938d67..2667e71721f5 100644
--- a/drivers/iio/pressure/t5403.c
+++ b/drivers/iio/pressure/t5403.c
@@ -221,7 +221,7 @@ static int t5403_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
 	    I2C_FUNC_SMBUS_I2C_BLOCK))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	ret = i2c_smbus_read_byte_data(client, T5403_SLAVE_ADDR);
 	if (ret < 0)