Merge tag 'iio-for-3.20a_take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

First round of IIO new drivers, cleanups and functionality for the 3.20 cycle take 2

Updated pull request with Daniel's fix on top for the power management
Kconfig changes that had snuck in since last update of the IIO tree
worked it's way through from mainline.

Original pull message

New device support
* jsa1212 proxmity / ambient light sensor
* SM08500 supported added to the kxcjk-1013 accelerometer driver
* KMX61 Accelerometer/Magnetometer.  This took a somewhat rocky path
  being first merged, then reverted for a rewrite after a discussion of
  how to support additional functionality and finally being merged prior
  to some last reviews coming in, with resultant follow up patches.
* Freescale mma9551l driver (minor follow up warning supression patch).
* Semtech SX9500 proximity device driver.
* ak8975 gains support for ak09911 and ak09912 and drop the standalone driver
  for the ak09911.

New functionality
 * Dummy driver gains some virtual registers making it more flexible.
 * IIO_ACTIVITY channel types, with modifiers running, walking etc.  This is
   to support on chip motion clasifiers.  As such it is in the form of a
   confidence percentage.  The only devices so far only do binary decisions
   but this gives us room when other devices give more nuanced clasification.
 * IIO_EV_DIR_NONE type for events where there is no obvious direction.
   First case is step detection.
 * IIO_STEPS channel type for pedometers.
 * ENABLE mask element used to control turning on counting types such as
   the pedometer that need a 'start point'.
 * INSTANCE event type to support things that happen once.
 * info element for height calibration (used in various motion estimation
   algorithms). Note heigh tof use
 * dummy driver demonstration of the use of all the new bits above.
 * event monitor support for the new events.
 * inv_mpu6050 gains an i2c mux to allow bypassing the device to access
   additional devices connected on the other side of it.  Note that in
   Windows these are handled by firmware on the device and not exposed
   directly.
 * inv_mpu6050 gains ACPI enumeration.
 * inkern interface gains iio_write_channel_raw to allow in kernel users
   of DAC functionality via a simple wrapper.
 * Document input current readings in the ABI docs.
 * Add an error message when we get an out of range error in device tree
   processing for the in kernel interfaces.  Basically a device tree debugging
   aid.
 * Add a sanity check that a scan index for a channel is unique during
   registration.  There to help catch bugs as this should never happen
   in a bug free driver.

Cleanups and fixlets

 A rework of buffer registration from Lars - a precursor to some other
 upcoming new stuff (a few patches from others rolled in here as well).
 * Ensure all drivers register the same channels for the device and buffer.
 * Move buffer registration into the core rather than using the old
   two step approach.  Now we have simple ways of using a unified set channels
   for both without requiring channels be exposed by both interface, this
   removes a fair bit of boilerplate.
 * Stop sca3000 and ad5933 (both in staging) enabling buffer channels by
   default. It has long be convention in IIO to startup with no channels
   enabled and leave it up to userspace to say what goes in the buffer.
   Getting rid of these allows us to drop export of iio_scan_mask_set.
 * Drop get_bytes_per_datum from iio_buffer_access_funcs as not been used
   for a while.
 * Allocate standard buffer attributes in the core rather than in every
   driver with a buffer.
 * Make the length attribute read only when a driver is not able to set
   the length.
 * Drop the get_length callback for buffers as it is already available in
   struct iio_buffer.
 * Drop an unused arguement form iio_kfifo_allocate and add devm allocator
   for it.
 * some kconfig entries gain anotation with the resulting module name.
 * Fix a resulting compile issue in dummy driver due to a stub taking
   wrong parameters as a result of the above rework.
 * Fix an off by 2 error in copying the core assigned buffer attributes.

Other cleanups,
 * Trivial space before comma fixups.
 * ak8975 fixlets - none critical.  Rework to allow more device support.
 * Drop unnecessary sizeof(u8) calls.
 * bmp280 - refactor the compensation code to reduce copy operations and
   code length.  A second patch futher optimized this and performed some
   other minor cleanups.
 * kxcjk-1013 - various power control cleanups to avoid unnecessary enable
   / disable of device.  Make sure it is only controlled at all if CONFIG_PM
   is enabled.  Also som cleanups of error paths.
 * Small cleanups in adf4530 driver - pointless message and unnecessary braces.
 * Clarifiy the proximity ABI docs to make it clear it should get bigger
   as we move futher away.
 * Drop a misleading comment form industrialio-core.c
 * Trivial white space cleanups.
 * sca3000 looses an unused debug function.
 * Fix char unsigned ordering in ad8366
 * Increase the sleep time in ad9523 to make it predictable (value didn't
   really matter so make it more than 20 msecs)
 * mxs-lradc touchscreen property cleanups in device tree are fixed to ensure
   the meet all the 'interesting' documentation.
 * A couple of cleanups for the staging ad5933 driver to avoid unnecessary
   conversion to a processed temperature vlaue in kernel and remove
   platform data form the state structure as not needed after probe.
 * Fix a wrong scale factor in the docs.

Misc
 * Add IIO include files to the maintainers entry.

4 files changed, 486 insertions, 1 deletions

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 5bea821adcae..5a3237b2aaa5 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -95,6 +95,9 @@ config HID_SENSOR_ALS
 	  Say yes here to build support for the HID SENSOR
 	  Ambient light sensor.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-als.
+
 config HID_SENSOR_PROX
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
@@ -109,6 +112,16 @@ config HID_SENSOR_PROX
 	  To compile this driver as a module, choose M here: the
 	  module will be called hid-sensor-prox.
 
+config JSA1212
+	tristate "JSA1212 ALS and proximity sensor driver"
+	depends on I2C
+	help
+	 Say Y here if you want to build a IIO driver for JSA1212
+	 proximity & ALS sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called jsa1212.
+
 config SENSORS_LM3533
 	tristate "LM3533 ambient light sensor"
 	depends on MFD_LM3533
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 47877a36cc12..74656c19a899 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
 obj-$(CONFIG_ISL29125)		+= isl29125.o
+obj-$(CONFIG_JSA1212)		+= jsa1212.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
new file mode 100644
index 000000000000..29de7e7d9562
--- /dev/null
+++ b/drivers/iio/light/jsa1212.c
@@ -0,0 +1,471 @@
+/*
+ * JSA1212 Ambient Light & Proximity Sensor Driver
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * JSA1212 I2C slave address: 0x44(ADDR tied to GND), 0x45(ADDR tied to VDD)
+ *
+ * TODO: Interrupt support, thresholds, range support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* JSA1212 reg address */
+#define JSA1212_CONF_REG		0x01
+#define JSA1212_INT_REG			0x02
+#define JSA1212_PXS_LT_REG		0x03
+#define JSA1212_PXS_HT_REG		0x04
+#define JSA1212_ALS_TH1_REG		0x05
+#define JSA1212_ALS_TH2_REG		0x06
+#define JSA1212_ALS_TH3_REG		0x07
+#define JSA1212_PXS_DATA_REG		0x08
+#define JSA1212_ALS_DT1_REG		0x09
+#define JSA1212_ALS_DT2_REG		0x0A
+#define JSA1212_ALS_RNG_REG		0x0B
+#define JSA1212_MAX_REG			0x0C
+
+/* JSA1212 reg masks */
+#define JSA1212_CONF_MASK		0xFF
+#define JSA1212_INT_MASK		0xFF
+#define JSA1212_PXS_LT_MASK		0xFF
+#define JSA1212_PXS_HT_MASK		0xFF
+#define JSA1212_ALS_TH1_MASK		0xFF
+#define JSA1212_ALS_TH2_LT_MASK		0x0F
+#define JSA1212_ALS_TH2_HT_MASK		0xF0
+#define JSA1212_ALS_TH3_MASK		0xFF
+#define JSA1212_PXS_DATA_MASK		0xFF
+#define JSA1212_ALS_DATA_MASK		0x0FFF
+#define JSA1212_ALS_DT1_MASK		0xFF
+#define JSA1212_ALS_DT2_MASK		0x0F
+#define JSA1212_ALS_RNG_MASK		0x07
+
+/* JSA1212 CONF REG bits */
+#define JSA1212_CONF_PXS_MASK		0x80
+#define JSA1212_CONF_PXS_ENABLE		0x80
+#define JSA1212_CONF_PXS_DISABLE	0x00
+#define JSA1212_CONF_ALS_MASK		0x04
+#define JSA1212_CONF_ALS_ENABLE		0x04
+#define JSA1212_CONF_ALS_DISABLE	0x00
+#define JSA1212_CONF_IRDR_MASK		0x08
+/* Proxmity sensing IRDR current sink settings */
+#define JSA1212_CONF_IRDR_200MA		0x08
+#define JSA1212_CONF_IRDR_100MA		0x00
+#define JSA1212_CONF_PXS_SLP_MASK	0x70
+#define JSA1212_CONF_PXS_SLP_0MS	0x70
+#define JSA1212_CONF_PXS_SLP_12MS	0x60
+#define JSA1212_CONF_PXS_SLP_50MS	0x50
+#define JSA1212_CONF_PXS_SLP_75MS	0x40
+#define JSA1212_CONF_PXS_SLP_100MS	0x30
+#define JSA1212_CONF_PXS_SLP_200MS	0x20
+#define JSA1212_CONF_PXS_SLP_400MS	0x10
+#define JSA1212_CONF_PXS_SLP_800MS	0x00
+
+/* JSA1212 INT REG bits */
+#define JSA1212_INT_CTRL_MASK		0x01
+#define JSA1212_INT_CTRL_EITHER		0x00
+#define JSA1212_INT_CTRL_BOTH		0x01
+#define JSA1212_INT_ALS_PRST_MASK	0x06
+#define JSA1212_INT_ALS_PRST_1CONV	0x00
+#define JSA1212_INT_ALS_PRST_4CONV	0x02
+#define JSA1212_INT_ALS_PRST_8CONV	0x04
+#define JSA1212_INT_ALS_PRST_16CONV	0x06
+#define JSA1212_INT_ALS_FLAG_MASK	0x08
+#define JSA1212_INT_ALS_FLAG_CLR	0x00
+#define JSA1212_INT_PXS_PRST_MASK	0x60
+#define JSA1212_INT_PXS_PRST_1CONV	0x00
+#define JSA1212_INT_PXS_PRST_4CONV	0x20
+#define JSA1212_INT_PXS_PRST_8CONV	0x40
+#define JSA1212_INT_PXS_PRST_16CONV	0x60
+#define JSA1212_INT_PXS_FLAG_MASK	0x80
+#define JSA1212_INT_PXS_FLAG_CLR	0x00
+
+/* JSA1212 ALS RNG REG bits */
+#define JSA1212_ALS_RNG_0_2048		0x00
+#define JSA1212_ALS_RNG_0_1024		0x01
+#define JSA1212_ALS_RNG_0_512		0x02
+#define JSA1212_ALS_RNG_0_256		0x03
+#define JSA1212_ALS_RNG_0_128		0x04
+
+/* JSA1212 INT threshold range */
+#define JSA1212_ALS_TH_MIN	0x0000
+#define JSA1212_ALS_TH_MAX	0x0FFF
+#define JSA1212_PXS_TH_MIN	0x00
+#define JSA1212_PXS_TH_MAX	0xFF
+
+#define JSA1212_ALS_DELAY_MS	200
+#define JSA1212_PXS_DELAY_MS	100
+
+#define JSA1212_DRIVER_NAME	"jsa1212"
+#define JSA1212_REGMAP_NAME	"jsa1212_regmap"
+
+enum jsa1212_op_mode {
+	JSA1212_OPMODE_ALS_EN,
+	JSA1212_OPMODE_PXS_EN,
+};
+
+struct jsa1212_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 als_rng_idx;
+	bool als_en; /* ALS enable status */
+	bool pxs_en; /* proximity enable status */
+	struct regmap *regmap;
+};
+
+/* ALS range idx to val mapping */
+static const int jsa1212_als_range_val[] = {2048, 1024, 512, 256, 128,
+						128, 128, 128};
+
+/* Enables or disables ALS function based on status */
+static int jsa1212_als_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->als_en = !!status;
+
+	return 0;
+}
+
+/* Enables or disables PXS function based on status */
+static int jsa1212_pxs_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_PXS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->pxs_en = !!status;
+
+	return 0;
+}
+
+static int jsa1212_read_als_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	__le16 als_data;
+
+	ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_ALS_DELAY_MS);
+
+	/* Read 12 bit data */
+	ret = regmap_bulk_read(data->regmap, JSA1212_ALS_DT1_REG, &als_data, 2);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "als data read err\n");
+		goto als_data_read_err;
+	}
+
+	*val = le16_to_cpu(als_data);
+
+als_data_read_err:
+	return jsa1212_als_enable(data, JSA1212_CONF_ALS_DISABLE);
+}
+
+static int jsa1212_read_pxs_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	unsigned int pxs_data;
+
+	ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_PXS_DELAY_MS);
+
+	/* Read out all data */
+	ret = regmap_read(data->regmap, JSA1212_PXS_DATA_REG, &pxs_data);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "pxs data read err\n");
+		goto pxs_data_read_err;
+	}
+
+	*val = pxs_data & JSA1212_PXS_DATA_MASK;
+
+pxs_data_read_err:
+	return jsa1212_pxs_enable(data, JSA1212_CONF_PXS_DISABLE);
+}
+
+static int jsa1212_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	int ret;
+	struct jsa1212_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->lock);
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = jsa1212_read_als_data(data, val);
+			break;
+		case IIO_PROXIMITY:
+			ret = jsa1212_read_pxs_data(data, val);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->lock);
+		return ret < 0 ? ret : IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			*val = jsa1212_als_range_val[data->als_rng_idx];
+			*val2 = BIT(12); /* Max 12 bit value */
+			return IIO_VAL_FRACTIONAL;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec jsa1212_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	}
+};
+
+static const struct iio_info jsa1212_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= &jsa1212_read_raw,
+};
+
+static int jsa1212_chip_init(struct jsa1212_data *data)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, JSA1212_CONF_REG,
+				(JSA1212_CONF_PXS_SLP_50MS |
+				JSA1212_CONF_IRDR_200MA));
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(data->regmap, JSA1212_INT_REG,
+				JSA1212_INT_ALS_PRST_4CONV);
+	if (ret < 0)
+		return ret;
+
+	data->als_rng_idx = JSA1212_ALS_RNG_0_2048;
+
+	return 0;
+}
+
+static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case JSA1212_PXS_DATA_REG:
+	case JSA1212_ALS_DT1_REG:
+	case JSA1212_ALS_DT2_REG:
+	case JSA1212_INT_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct regmap_config jsa1212_regmap_config = {
+	.name =  JSA1212_REGMAP_NAME,
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = JSA1212_MAX_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = jsa1212_is_volatile_reg,
+};
+
+static int jsa1212_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct jsa1212_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &jsa1212_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Regmap initialization failed.\n");
+		return PTR_ERR(regmap);
+	}
+
+	data = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->regmap = regmap;
+
+	mutex_init(&data->lock);
+
+	ret = jsa1212_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = jsa1212_channels;
+	indio_dev->num_channels = ARRAY_SIZE(jsa1212_channels);
+	indio_dev->name = JSA1212_DRIVER_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->info = &jsa1212_info;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		dev_err(&client->dev, "%s: register device failed\n", __func__);
+
+	return ret;
+}
+
+ /* power off the device */
+static int jsa1212_power_off(struct jsa1212_data *data)
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK |
+				JSA1212_CONF_PXS_MASK,
+				JSA1212_CONF_ALS_DISABLE |
+				JSA1212_CONF_PXS_DISABLE);
+
+	if (ret < 0)
+		dev_err(&data->client->dev, "power off cmd failed\n");
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int jsa1212_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct jsa1212_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	return jsa1212_power_off(data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int jsa1212_suspend(struct device *dev)
+{
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	return jsa1212_power_off(data);
+}
+
+static int jsa1212_resume(struct device *dev)
+{
+	int ret = 0;
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	mutex_lock(&data->lock);
+
+	if (data->als_en) {
+		ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+		if (ret < 0) {
+			dev_err(dev, "als resume failed\n");
+			goto unlock_and_ret;
+		}
+	}
+
+	if (data->pxs_en) {
+		ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+		if (ret < 0)
+			dev_err(dev, "pxs resume failed\n");
+	}
+
+unlock_and_ret:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(jsa1212_pm_ops, jsa1212_suspend, jsa1212_resume);
+
+#define JSA1212_PM_OPS (&jsa1212_pm_ops)
+#else
+#define JSA1212_PM_OPS NULL
+#endif
+
+static const struct acpi_device_id jsa1212_acpi_match[] = {
+	{"JSA1212", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, jsa1212_acpi_match);
+
+static const struct i2c_device_id jsa1212_id[] = {
+	{ JSA1212_DRIVER_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, jsa1212_id);
+
+static struct i2c_driver jsa1212_driver = {
+	.driver = {
+		.name	= JSA1212_DRIVER_NAME,
+		.pm	= JSA1212_PM_OPS,
+		.owner	= THIS_MODULE,
+		.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
+	},
+	.probe		= jsa1212_probe,
+	.remove		= jsa1212_remove,
+	.id_table	= jsa1212_id,
+};
+module_i2c_driver(jsa1212_driver);
+
+MODULE_AUTHOR("Sathya Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>");
+MODULE_DESCRIPTION("JSA1212 proximity/ambient light sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index ae3c71bdd6c6..076bc46fad03 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -657,7 +657,7 @@ static ALS_HYSTERESIS_ATTR_RO(3);
 #define ILLUMINANCE_ATTR_RO(_name) \
 	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO, show_##_name, NULL)
 #define ILLUMINANCE_ATTR_RW(_name) \
-	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR , \
+	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR, \
 						show_##_name, store_##_name)
 /*
  * ALS Zone threshold-event enable