Merge tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging / iio updates from Greg KH:
 "Here is the big staging and iio set of patches for the 5.5-rc1
  release.

  It's the usual huge collection of cleanup patches all over the
  drivers/staging/ area, along with a new staging driver, and a bunch of
  new IIO drivers as well.

  Full details are in the shortlog, but all of these have been in
  linux-next for a long time with no reported issues"

* tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits)
  staging: vchiq: Have vchiq_dump_* functions return an error code
  staging: vchiq: Refactor indentation in vchiq_dump_* functions
  staging: fwserial: Fix Kconfig indentation (seven spaces)
  staging: vchiq_dump: Replace min with min_t
  staging: vchiq: Fix block comment format in vchiq_dump()
  staging: octeon: indent with tabs instead of spaces
  staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error
  staging: most: core: remove sysfs attr remove_link
  staging: vc04: Fix Kconfig indentation
  staging: pi433: Fix Kconfig indentation
  staging: nvec: Fix Kconfig indentation
  staging: most: Fix Kconfig indentation
  staging: fwserial: Fix Kconfig indentation
  staging: fbtft: Fix Kconfig indentation
  fbtft: Drop OF dependency
  fbtft: Make use of device property API
  fbtft: Drop useless #ifdef CONFIG_OF and dead code
  fbtft: Describe function parameters in kernel-doc
  fbtft: Make sure string is NULL terminated
  staging: rtl8723bs: remove set but not used variable 'change', 'pos'
  ...

1 files changed, 19 insertions, 8 deletions

diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 93a096a91f8c..6537f4f776c5 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -38,12 +38,12 @@
 #define HAS_ANASWVDD		BIT(1)
 
 /**
- * stm32_adc_common_regs - stm32 common registers, compatible dependent data
+ * struct stm32_adc_common_regs - stm32 common registers
  * @csr:	common status register offset
  * @ccr:	common control register offset
- * @eoc1:	adc1 end of conversion flag in @csr
- * @eoc2:	adc2 end of conversion flag in @csr
- * @eoc3:	adc3 end of conversion flag in @csr
+ * @eoc1_msk:	adc1 end of conversion flag in @csr
+ * @eoc2_msk:	adc2 end of conversion flag in @csr
+ * @eoc3_msk:	adc3 end of conversion flag in @csr
  * @ier:	interrupt enable register offset for each adc
  * @eocie_msk:	end of conversion interrupt enable mask in @ier
  */
@@ -60,7 +60,7 @@ struct stm32_adc_common_regs {
 struct stm32_adc_priv;
 
 /**
- * stm32_adc_priv_cfg - stm32 core compatible configuration data
+ * struct stm32_adc_priv_cfg - stm32 core compatible configuration data
  * @regs:	common registers for all instances
  * @clk_sel:	clock selection routine
  * @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
@@ -79,6 +79,7 @@ struct stm32_adc_priv_cfg {
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
+ * @max_clk_rate:	desired maximum clock rate
  * @booster:		booster supply reference
  * @vdd:		vdd supply reference
  * @vdda:		vdda analog supply reference
@@ -95,6 +96,7 @@ struct stm32_adc_priv {
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
+	u32				max_clk_rate;
 	struct regulator		*booster;
 	struct regulator		*vdd;
 	struct regulator		*vdda;
@@ -117,6 +119,7 @@ static int stm32f4_pclk_div[] = {2, 4, 6, 8};
 
 /**
  * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
+ * @pdev: platform device
  * @priv: stm32 ADC core private data
  * Select clock prescaler used for analog conversions, before using ADC.
  */
@@ -140,7 +143,7 @@ static int stm32f4_adc_clk_sel(struct platform_device *pdev,
 	}
 
 	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
-		if ((rate / stm32f4_pclk_div[i]) <= priv->cfg->max_clk_rate_hz)
+		if ((rate / stm32f4_pclk_div[i]) <= priv->max_clk_rate)
 			break;
 	}
 	if (i >= ARRAY_SIZE(stm32f4_pclk_div)) {
@@ -229,7 +232,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 			if (ckmode)
 				continue;
 
-			if ((rate / div) <= priv->cfg->max_clk_rate_hz)
+			if ((rate / div) <= priv->max_clk_rate)
 				goto out;
 		}
 	}
@@ -249,7 +252,7 @@ static int stm32h7_adc_clk_sel(struct platform_device *pdev,
 		if (!ckmode)
 			continue;
 
-		if ((rate / div) <= priv->cfg->max_clk_rate_hz)
+		if ((rate / div) <= priv->max_clk_rate)
 			goto out;
 	}
 
@@ -654,6 +657,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
+	u32 max_rate;
 	int ret;
 
 	if (!pdev->dev.of_node)
@@ -730,6 +734,13 @@ static int stm32_adc_probe(struct platform_device *pdev)
 	priv->common.vref_mv = ret / 1000;
 	dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
 
+	ret = of_property_read_u32(pdev->dev.of_node, "st,max-clk-rate-hz",
+				   &max_rate);
+	if (!ret)
+		priv->max_clk_rate = min(max_rate, priv->cfg->max_clk_rate_hz);
+	else
+		priv->max_clk_rate = priv->cfg->max_clk_rate_hz;
+
 	ret = priv->cfg->clk_sel(pdev, priv);
 	if (ret < 0)
 		goto err_hw_stop;