diff options
author | Linus Torvalds <torvalds@g5.osdl.org> | 2006-06-21 07:01:16 +0400 |
---|---|---|
committer | Linus Torvalds <torvalds@g5.osdl.org> | 2006-06-21 07:01:16 +0400 |
commit | 34641a58a227e498adf471ab016bd054cc399d7e (patch) | |
tree | da1e0af965d06d0c6e13c546ac01f6a54a904d86 /drivers/ieee1394/ohci1394.c | |
parent | 2eec0e0842ef747027eb9181d5f50d7157184d57 (diff) | |
parent | 7136b8073f0123918e3e50269ae021bbb09e1a81 (diff) | |
download | linux-34641a58a227e498adf471ab016bd054cc399d7e.tar.xz |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits)
eth1394: replace __constant_htons by htons
ieee1394: adjust code formatting in highlevel.c
ieee1394: hl_irqs_lock is taken in hardware interrupt context
ieee1394_core: switch to kthread API
ieee1394: sbp2: Kconfig fix
ieee1394: add preprocessor constant for invalid csr address
sbp2: fix deregistration of status fifo address space
[PATCH] eth1394: endian fixes
Fix broken suspend/resume in ohci1394
sbp2: use __attribute__((packed)) for on-the-wire structures
sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental
Update feature removal of obsolete raw1394 ISO requests.
sbp2: fix S800 transfers if phys_dma is off
sbp2: remove ohci1394 specific constant
ohci1394: make phys_dma parameter read-only
ohci1394: set address range properties
ieee1394: extend lowlevel API for address range properties
sbp2: log number of supported concurrent logins
sbp2: remove manipulation of inquiry response
ieee1394: save RAM by using a single tlabel for broadcast transactions
...
Diffstat (limited to 'drivers/ieee1394/ohci1394.c')
-rw-r--r-- | drivers/ieee1394/ohci1394.c | 37 |
1 files changed, 24 insertions, 13 deletions
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index c031650a1c74..3d278412e1ca 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -163,7 +163,7 @@ printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , /* Module Parameters */ static int phys_dma = 1; -module_param(phys_dma, int, 0644); +module_param(phys_dma, int, 0444); MODULE_PARM_DESC(phys_dma, "Enable physical dma (default = 1)."); static void dma_trm_tasklet(unsigned long data); @@ -553,7 +553,8 @@ static void ohci_initialize(struct ti_ohci *ohci) * register content. * To actually enable physical responses is the job of our interrupt * handler which programs the physical request filter. */ - reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000); + reg_write(ohci, OHCI1394_PhyUpperBound, + OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED >> 16); DBGMSG("physUpperBoundOffset=%08x", reg_read(ohci, OHCI1394_PhyUpperBound)); @@ -580,6 +581,7 @@ static void ohci_initialize(struct ti_ohci *ohci) OHCI1394_isochRx | OHCI1394_isochTx | OHCI1394_postedWriteErr | + OHCI1394_cycleTooLong | OHCI1394_cycleInconsistent); /* Enable link */ @@ -2382,6 +2384,15 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id, PRINT(KERN_ERR, "physical posted write error"); /* no recovery strategy yet, had to involve protocol drivers */ } + if (event & OHCI1394_cycleTooLong) { + if(printk_ratelimit()) + PRINT(KERN_WARNING, "isochronous cycle too long"); + else + DBGMSG("OHCI1394_cycleTooLong"); + reg_write(ohci, OHCI1394_LinkControlSet, + OHCI1394_LinkControl_CycleMaster); + event &= ~OHCI1394_cycleTooLong; + } if (event & OHCI1394_cycleInconsistent) { /* We subscribe to the cycleInconsistent event only to * clear the corresponding event bit... otherwise, @@ -3400,6 +3411,14 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev, host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf; host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7; + if (phys_dma) { + host->low_addr_space = + (u64) reg_read(ohci, OHCI1394_PhyUpperBound) << 16; + if (!host->low_addr_space) + host->low_addr_space = OHCI1394_PHYS_UPPER_BOUND_FIXED; + } + host->middle_addr_space = OHCI1394_MIDDLE_ADDRESS_SPACE; + /* Tell the highlevel this host is ready */ if (hpsb_add_host(host)) FAIL(-ENOMEM, "Failed to register host with highlevel"); @@ -3458,24 +3477,13 @@ static void ohci1394_pci_remove(struct pci_dev *pdev) case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE: /* The ohci_soft_reset() stops all DMA contexts, so we * dont need to do this. */ - /* Free AR dma */ free_dma_rcv_ctx(&ohci->ar_req_context); free_dma_rcv_ctx(&ohci->ar_resp_context); - - /* Free AT dma */ free_dma_trm_ctx(&ohci->at_req_context); free_dma_trm_ctx(&ohci->at_resp_context); - - /* Free IR dma */ free_dma_rcv_ctx(&ohci->ir_legacy_context); - - /* Free IT dma */ free_dma_trm_ctx(&ohci->it_legacy_context); - /* Free IR legacy dma */ - free_dma_rcv_ctx(&ohci->ir_legacy_context); - - case OHCI_INIT_HAVE_SELFID_BUFFER: pci_free_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE, ohci->selfid_buf_cpu, @@ -3535,6 +3543,7 @@ static int ohci1394_pci_resume (struct pci_dev *pdev) } #endif /* CONFIG_PPC_PMAC */ + pci_restore_state(pdev); pci_enable_device(pdev); return 0; @@ -3554,6 +3563,8 @@ static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state) } #endif + pci_save_state(pdev); + return 0; } |