Merge branch 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "For 3.19, the I2C subsystem has to offer special candy this time.
  Right in time for Christmas :)

   - I2C slave framework: finally, a generic mechanism for Linux being
     an I2C slave (if the bus driver supports that).  Docs are still
     missing but will come later this cycle, the code is good enough to
     go.
   - I2C muxes represent their topology in sysfs much more detailed.
     This will help users to navigate around much easier.
   - irq population of i2c clients is now done at probe time, not device
     creation time, to have better support for deferred probing.
   - new drivers for Imagination SCB, Amlogic Meson
   - DMA support added for Freescale IMX, Renesas SHMobile
   - slightly bigger driver updates to OMAP, i801, AT91, and rk3x
     (mostly quirk handling, timing updates, and using better kernel
     interfaces)
   - eeprom driver can now write with byte-access (very slow, but OK to
     have)
   - and the bunch of smaller fixes, cleanups, ID updates..."

* 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (56 commits)
  i2c: sh_mobile: remove unneeded DMA mask
  i2c: rcar: add slave support
  i2c: slave-eeprom: add eeprom simulator driver
  i2c: core changes for slave support
  MAINTAINERS: add I2C dt bindings also to I2C realm
  i2c: designware: Fix falling time bindings doc
  i2c: davinci: switch to use platform_get_irq
  Documentation: i2c: Use PM ops instead of legacy suspend/resume
  i2c: sh_mobile: optimize irq entry
  i2c: pxa: add support for SCCB devices
  omap: i2c: don't check bus state IP rev3.3 and earlier
  i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  i2c: rk3x: add Kconfig dependency on COMMON_CLK
  i2c: omap: add notes related to i2c multimaster mode
  i2c: omap: don't reset controller if Arbitration Lost detected
  i2c: omap: implement workaround for handling invalid BB-bit values
  i2c: omap: cleanup register definitions
  i2c: rk3x: handle dynamic clock rate changes correctly
  i2c: at91: enable probe deferring on dma channel request
  i2c: at91: remove legacy DMA support
  ...

1 files changed, 53 insertions, 5 deletions

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index cc65ea0b818f..522916a33aa0 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -46,6 +46,11 @@ enum xilinx_i2c_state {
 	STATE_START
 };
 
+enum xiic_endian {
+	LITTLE,
+	BIG
+};
+
 /**
  * struct xiic_i2c - Internal representation of the XIIC I2C bus
  * @base:	Memory base of the HW registers
@@ -70,6 +75,7 @@ struct xiic_i2c {
 	enum xilinx_i2c_state	state;
 	struct i2c_msg		*rx_msg;
 	int			rx_pos;
+	enum xiic_endian	endianness;
 };
 
 
@@ -170,29 +176,58 @@ struct xiic_i2c {
 static void xiic_start_xfer(struct xiic_i2c *i2c);
 static void __xiic_start_xfer(struct xiic_i2c *i2c);
 
+/*
+ * For the register read and write functions, a little-endian and big-endian
+ * version are necessary. Endianness is detected during the probe function.
+ * Only the least significant byte [doublet] of the register are ever
+ * accessed. This requires an offset of 3 [2] from the base address for
+ * big-endian systems.
+ */
+
 static inline void xiic_setreg8(struct xiic_i2c *i2c, int reg, u8 value)
 {
-	iowrite8(value, i2c->base + reg);
+	if (i2c->endianness == LITTLE)
+		iowrite8(value, i2c->base + reg);
+	else
+		iowrite8(value, i2c->base + reg + 3);
 }
 
 static inline u8 xiic_getreg8(struct xiic_i2c *i2c, int reg)
 {
-	return ioread8(i2c->base + reg);
+	u8 ret;
+
+	if (i2c->endianness == LITTLE)
+		ret = ioread8(i2c->base + reg);
+	else
+		ret = ioread8(i2c->base + reg + 3);
+	return ret;
 }
 
 static inline void xiic_setreg16(struct xiic_i2c *i2c, int reg, u16 value)
 {
-	iowrite16(value, i2c->base + reg);
+	if (i2c->endianness == LITTLE)
+		iowrite16(value, i2c->base + reg);
+	else
+		iowrite16be(value, i2c->base + reg + 2);
 }
 
 static inline void xiic_setreg32(struct xiic_i2c *i2c, int reg, int value)
 {
-	iowrite32(value, i2c->base + reg);
+	if (i2c->endianness == LITTLE)
+		iowrite32(value, i2c->base + reg);
+	else
+		iowrite32be(value, i2c->base + reg);
 }
 
 static inline int xiic_getreg32(struct xiic_i2c *i2c, int reg)
 {
-	return ioread32(i2c->base + reg);
+	u32 ret;
+
+	if (i2c->endianness == LITTLE)
+		ret = ioread32(i2c->base + reg);
+	else
+		ret = ioread32be(i2c->base + reg);
+	return ret;
 }
 
 static inline void xiic_irq_dis(struct xiic_i2c *i2c, u32 mask)
@@ -692,6 +727,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret, irq;
 	u8 i;
+	u32 sr;
 
 	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
 	if (!i2c)
@@ -724,6 +760,18 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	/*
+	 * Detect endianness
+	 * Try to reset the TX FIFO. Then check the EMPTY flag. If it is not
+	 * set, assume that the endianness was wrong and swap.
+	 */
+	i2c->endianness = LITTLE;
+	xiic_setreg32(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_TX_FIFO_RESET_MASK);
+	/* Reset is cleared in xiic_reinit */
+	sr = xiic_getreg32(i2c, XIIC_SR_REG_OFFSET);
+	if (!(sr & XIIC_SR_TX_FIFO_EMPTY_MASK))
+		i2c->endianness = BIG;
+
 	xiic_reinit(i2c);
 
 	/* add i2c adapter to i2c tree */