diff options
author | Björn Gerhart <oss@extracloud.de> | 2011-12-13 22:19:58 +0400 |
---|---|---|
committer | Guenter Roeck <guenter.roeck@ericsson.com> | 2012-01-05 20:19:32 +0400 |
commit | f58c44e698a8362d2ab2d1c966ca80b748ff9ff9 (patch) | |
tree | bd60a488afc116ece796fa24238437dea42b55a7 /drivers/hwmon | |
parent | 5cd3222a9f3742e3da6becbd1a939e1221e030c4 (diff) | |
download | linux-f58c44e698a8362d2ab2d1c966ca80b748ff9ff9.tar.xz |
hwmon: (f75375s) Add support for F75387SG/RG
Fintek F75387SG/RG is mostly compatible to F75373/F75375. Add support for it
to the F75375S driver.
Fan support for F75387SG/RG has been implemented but not tested.
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Bjoern Gerhart <oss@extracloud.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r-- | drivers/hwmon/Kconfig | 4 | ||||
-rw-r--r-- | drivers/hwmon/f75375s.c | 175 |
2 files changed, 130 insertions, 49 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 91be41f60809..cb351d358387 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -367,11 +367,11 @@ config SENSORS_F71882FG will be called f71882fg. config SENSORS_F75375S - tristate "Fintek F75375S/SP and F75373" + tristate "Fintek F75375S/SP, F75373 and F75387" depends on I2C help If you say yes here you get support for hardware monitoring - features of the Fintek F75375S/SP and F75373 + features of the Fintek F75375S/SP, F75373 and F75387 This driver can also be built as a module. If so, the module will be called f75375s. diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 35b570e56ff0..eedf574ab539 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -1,6 +1,6 @@ /* - * f75375s.c - driver for the Fintek F75375/SP and F75373 - * hardware monitoring features + * f75375s.c - driver for the Fintek F75375/SP, F75373 and + * F75387SG/RG hardware monitoring features * Copyright (C) 2006-2007 Riku Voipio * * Datasheets available at: @@ -11,6 +11,9 @@ * f75373: * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf * + * f75387: + * http://www.fintek.com.tw/files/productfiles/F75387_V027P.pdf + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -40,7 +43,7 @@ /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END }; -enum chips { f75373, f75375 }; +enum chips { f75373, f75375, f75387 }; /* Fintek F75375 registers */ #define F75375_REG_CONFIG0 0x0 @@ -59,6 +62,7 @@ enum chips { f75373, f75375 }; #define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2) #define F75375_REG_TEMP(nr) (0x14 + (nr)) +#define F75387_REG_TEMP11_LSB(nr) (0x1a + (nr)) #define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2) #define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2) @@ -78,8 +82,11 @@ enum chips { f75373, f75375 }; #define F75375_REG_PWM1_DROP_DUTY 0x6B #define F75375_REG_PWM2_DROP_DUTY 0x6C -#define FAN_CTRL_LINEAR(nr) (4 + nr) +#define F75375_FAN_CTRL_LINEAR(nr) (4 + nr) +#define F75387_FAN_CTRL_LINEAR(nr) (1 + ((nr) * 4)) #define FAN_CTRL_MODE(nr) (4 + ((nr) * 2)) +#define F75387_FAN_DUTY_MODE(nr) (2 + ((nr) * 4)) +#define F75387_FAN_MANU_MODE(nr) ((nr) * 4) /* * Data structures and manipulation thereof @@ -108,7 +115,12 @@ struct f75375_data { u8 pwm[2]; u8 pwm_mode[2]; u8 pwm_enable[2]; - s8 temp[2]; + /* + * f75387: For remote temperature reading, it uses signed 11-bit + * values with LSB = 0.125 degree Celsius, left-justified in 16-bit + * registers. For original 8-bit temp readings, the LSB just is 0. + */ + s16 temp11[2]; s8 temp_high[2]; s8 temp_max_hyst[2]; }; @@ -122,6 +134,7 @@ static int f75375_remove(struct i2c_client *client); static const struct i2c_device_id f75375_id[] = { { "f75373", f75373 }, { "f75375", f75375 }, + { "f75387", f75387 }, { } }; MODULE_DEVICE_TABLE(i2c, f75375_id); @@ -205,8 +218,14 @@ static struct f75375_data *f75375_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { for (nr = 0; nr < 2; nr++) { - data->temp[nr] = - f75375_read8(client, F75375_REG_TEMP(nr)); + /* assign MSB, therefore shift it by 8 bits */ + data->temp11[nr] = + f75375_read8(client, F75375_REG_TEMP(nr)) << 8; + if (data->kind == f75387) + /* merge F75387's temperature LSB (11-bit) */ + data->temp11[nr] |= + f75375_read8(client, + F75387_REG_TEMP11_LSB(nr)); data->fan[nr] = f75375_read16(client, F75375_REG_FAN(nr)); } @@ -313,24 +332,50 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) return -EINVAL; fanmode = f75375_read8(client, F75375_REG_FAN_TIMER); - fanmode &= ~(3 << FAN_CTRL_MODE(nr)); - - switch (val) { - case 0: /* Full speed */ - fanmode |= (3 << FAN_CTRL_MODE(nr)); - data->pwm[nr] = 255; - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); - break; - case 1: /* PWM */ - fanmode |= (3 << FAN_CTRL_MODE(nr)); - break; - case 2: /* AUTOMATIC*/ - fanmode |= (2 << FAN_CTRL_MODE(nr)); - break; - case 3: /* fan speed */ - break; + if (data->kind == f75387) { + /* clear each fanX_mode bit before setting them properly */ + fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr)); + fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr)); + switch (val) { + case 0: /* full speed */ + fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); + fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); + data->pwm[nr] = 255; + f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), + data->pwm[nr]); + break; + case 1: /* PWM */ + fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); + fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); + break; + case 2: /* AUTOMATIC*/ + fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); + break; + case 3: /* fan speed */ + fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); + break; + } + } else { + /* clear each fanX_mode bit before setting them properly */ + fanmode &= ~(3 << FAN_CTRL_MODE(nr)); + switch (val) { + case 0: /* full speed */ + fanmode |= (3 << FAN_CTRL_MODE(nr)); + data->pwm[nr] = 255; + f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), + data->pwm[nr]); + break; + case 1: /* PWM */ + fanmode |= (3 << FAN_CTRL_MODE(nr)); + break; + case 2: /* AUTOMATIC*/ + fanmode |= (2 << FAN_CTRL_MODE(nr)); + break; + case 3: /* fan speed */ + break; + } } + f75375_write8(client, F75375_REG_FAN_TIMER, fanmode); data->pwm_enable[nr] = val; return 0; @@ -364,6 +409,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr, unsigned long val; int err; u8 conf; + char reg, ctrl; err = kstrtoul(buf, 10, &val); if (err < 0) @@ -376,14 +422,23 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr, if (data->kind == f75373 && val == 0) return -EINVAL; + /* take care for different registers */ + if (data->kind == f75387) { + reg = F75375_REG_FAN_TIMER; + ctrl = F75387_FAN_CTRL_LINEAR(nr); + } else { + reg = F75375_REG_CONFIG1; + ctrl = F75375_FAN_CTRL_LINEAR(nr); + } + mutex_lock(&data->update_lock); - conf = f75375_read8(client, F75375_REG_CONFIG1); - conf &= ~(1 << FAN_CTRL_LINEAR(nr)); + conf = f75375_read8(client, reg); + conf &= ~(1 << ctrl); if (val == 0) - conf |= (1 << FAN_CTRL_LINEAR(nr)) ; + conf |= (1 << ctrl); - f75375_write8(client, F75375_REG_CONFIG1, conf); + f75375_write8(client, reg, conf); data->pwm_mode[nr] = val; mutex_unlock(&data->update_lock); return count; @@ -475,13 +530,14 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, } #define TEMP_FROM_REG(val) ((val) * 1000) #define TEMP_TO_REG(val) ((val) / 1000) +#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, +static ssize_t show_temp11(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct f75375_data *data = f75375_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); + return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[nr])); } static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, @@ -577,12 +633,12 @@ static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR, show_in_max, set_in_max, 3); static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR, show_in_min, set_in_min, 3); -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, set_temp_max_hyst, 0); static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR, show_temp_max, set_temp_max, 0); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 1); static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst, set_temp_max_hyst, 1); static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR, @@ -664,18 +720,38 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data, conf = f75375_read8(client, F75375_REG_CONFIG1); mode = f75375_read8(client, F75375_REG_FAN_TIMER); for (nr = 0; nr < 2; nr++) { - if (!(conf & (1 << FAN_CTRL_LINEAR(nr)))) - data->pwm_mode[nr] = 1; - switch ((mode >> FAN_CTRL_MODE(nr)) & 3) { - case 0: /* speed */ - data->pwm_enable[nr] = 3; - break; - case 1: /* automatic */ - data->pwm_enable[nr] = 2; - break; - default: /* manual */ - data->pwm_enable[nr] = 1; - break; + if (data->kind == f75387) { + bool manu, duty; + + if (!(conf & (1 << F75387_FAN_CTRL_LINEAR(nr)))) + data->pwm_mode[nr] = 1; + + manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1); + duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1); + if (manu && duty) + /* speed */ + data->pwm_enable[nr] = 3; + else if (!manu && duty) + /* automatic */ + data->pwm_enable[nr] = 2; + else + /* manual */ + data->pwm_enable[nr] = 1; + } else { + if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr)))) + data->pwm_mode[nr] = 1; + + switch ((mode >> FAN_CTRL_MODE(nr)) & 3) { + case 0: /* speed */ + data->pwm_enable[nr] = 3; + break; + case 1: /* automatic */ + data->pwm_enable[nr] = 2; + break; + default: /* manual */ + data->pwm_enable[nr] = 1; + break; + } } } return; @@ -763,10 +839,15 @@ static int f75375_detect(struct i2c_client *client, vendid = f75375_read16(client, F75375_REG_VENDOR); chipid = f75375_read16(client, F75375_CHIP_ID); - if (chipid == 0x0306 && vendid == 0x1934) + if (vendid != 0x1934) + return -ENODEV; + + if (chipid == 0x0306) name = "f75375"; - else if (chipid == 0x0204 && vendid == 0x1934) + else if (chipid == 0x0204) name = "f75373"; + else if (chipid == 0x0410) + name = "f75387"; else return -ENODEV; @@ -789,7 +870,7 @@ static void __exit sensors_f75375_exit(void) MODULE_AUTHOR("Riku Voipio"); MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver"); +MODULE_DESCRIPTION("F75373/F75375/F75387 hardware monitoring driver"); module_init(sensors_f75375_init); module_exit(sensors_f75375_exit); |