Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: (lm90) Refactor reading of config2 register
  hwmon: (lm90) Make SA56004 detection more robust
  hwmon: (lm90) Simplify handling of extended local temp register
  hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
  hwmon: (max34440) Add support for peak attributes
  hwmon: (max8688) Add support for peak attributes
  hwmon: (max16064) Add support for peak attributes
  hwmon: (adm1275) Add support for peak attributes
  hwmon: (pmbus) Add support for peak attributes
  hwmon: Add new attributes to sysfs ABI
  hwmon: (pmbus) Strengthen check for status register existence
  hwmon: (pmbus) Add support for virtual pages
  hwmon: (pmbus) Support reading and writing of word registers in device specific code
  hwmon: (pmbus) Increase attribute name size
  hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
  hwmon: (pmbus) Add support for VID output voltage mode
  hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
  hwmon: (coretemp) Add core/pkg threshold support to Coretemp
  hwmon: (lm95241) Add support for LM95231
  hwmon: LM95245 driver
  ...

20 files changed, 2792 insertions, 281 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0598cd22edf2..0b62c3c6b7ce 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -623,7 +623,7 @@ config SENSORS_LM90
 	  LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 	  Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
-	  and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.
+	  Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
@@ -694,14 +694,24 @@ config SENSORS_LTC4261
 	  be called ltc4261.
 
 config SENSORS_LM95241
-	tristate "National Semiconductor LM95241 sensor chip"
+	tristate "National Semiconductor LM95241 and compatibles"
 	depends on I2C
 	help
-	  If you say yes here you get support for LM95241 sensor chip.
+	  If you say yes here you get support for LM95231 and LM95241 sensor
+	  chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm95241.
 
+config SENSORS_LM95245
+	tristate "National Semiconductor LM95245 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for LM95245 sensor chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lm95245.
+
 config SENSORS_MAX1111
 	tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 	depends on SPI_MASTER
@@ -736,6 +746,16 @@ config SENSORS_MAX1619
 	  This driver can also be built as a module.  If so, the module
 	  will be called max1619.
 
+config SENSORS_MAX1668
+	tristate "Maxim MAX1668 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for MAX1668, MAX1989 and
+	  MAX1805 chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max1668.
+
 config SENSORS_MAX6639
 	tristate "Maxim MAX6639 sensor chip"
 	depends on I2C && EXPERIMENTAL
@@ -767,6 +787,20 @@ config SENSORS_MAX6650
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6650.
 
+config SENSORS_NTC_THERMISTOR
+	tristate "NTC thermistor support"
+	depends on EXPERIMENTAL
+	help
+	  This driver supports NTC thermistors sensor reading and its
+	  interpretation. The driver can also monitor the temperature and
+	  send notifications about the temperature.
+
+	  Currently, this driver supports
+	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ntc-thermistor.
+
 config SENSORS_PC87360
 	tristate "National Semiconductor PC87360 family"
 	select HWMON_VID
@@ -807,92 +841,7 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
-config PMBUS
-	tristate "PMBus support"
-	depends on I2C && EXPERIMENTAL
-	default n
-	help
-	  Say yes here if you want to enable PMBus support.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called pmbus_core.
-
-if PMBUS
-
-config SENSORS_PMBUS
-	tristate "Generic PMBus devices"
-	default n
-	help
-	  If you say yes here you get hardware monitoring support for generic
-	  PMBus devices, including but not limited to BMR450, BMR451, BMR453,
-	  BMR454, and LTC2978.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called pmbus.
-
-config SENSORS_ADM1275
-	tristate "Analog Devices ADM1275"
-	default n
-	help
-	  If you say yes here you get hardware monitoring support for Analog
-	  Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called adm1275.
-
-config SENSORS_MAX16064
-	tristate "Maxim MAX16064"
-	default n
-	help
-	  If you say yes here you get hardware monitoring support for Maxim
-	  MAX16064.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called max16064.
-
-config SENSORS_MAX34440
-	tristate "Maxim MAX34440/MAX34441"
-	default n
-	help
-	  If you say yes here you get hardware monitoring support for Maxim
-	  MAX34440 and MAX34441.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called max34440.
-
-config SENSORS_MAX8688
-	tristate "Maxim MAX8688"
-	default n
-	help
-	  If you say yes here you get hardware monitoring support for Maxim
-	  MAX8688.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called max8688.
-
-config SENSORS_UCD9000
-	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
-	default n
-	help
-	  If you say yes here you get hardware monitoring support for TI
-	  UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
-	  Controllers.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called ucd9000.
-
-config SENSORS_UCD9200
-	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
-	default n
-	help
-	  If you say yes here you get hardware monitoring support for TI
-	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
-	  Digital PWM System Controllers.
-
-	  This driver can also be built as a module. If so, the module will
-	  be called ucd9200.
-
-endif # PMBUS
+source drivers/hwmon/pmbus/Kconfig
 
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d7995a1d0784..3c9ccefea791 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
 obj-$(CONFIG_SENSORS_LM92)	+= lm92.o
 obj-$(CONFIG_SENSORS_LM93)	+= lm93.o
 obj-$(CONFIG_SENSORS_LM95241)	+= lm95241.o
+obj-$(CONFIG_SENSORS_LM95245)	+= lm95245.o
 obj-$(CONFIG_SENSORS_LTC4151)	+= ltc4151.o
 obj-$(CONFIG_SENSORS_LTC4215)	+= ltc4215.o
 obj-$(CONFIG_SENSORS_LTC4245)	+= ltc4245.o
@@ -87,10 +88,12 @@ obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX16065)	+= max16065.o
 obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
+obj-$(CONFIG_SENSORS_MAX1668)	+= max1668.o
 obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6642)	+= max6642.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
+obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
@@ -121,15 +124,7 @@ obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
 obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
 obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
 
-# PMBus drivers
-obj-$(CONFIG_PMBUS)		+= pmbus_core.o
-obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
-obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
-obj-$(CONFIG_SENSORS_MAX16064)	+= max16064.o
-obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
-obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
-obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
-obj-$(CONFIG_SENSORS_UCD9200)	+= ucd9200.o
+obj-$(CONFIG_PMBUS)		+= pmbus/
 
 ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 0070d5476dd0..59d83e83da7f 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -44,7 +44,9 @@
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
 #define NUM_REAL_CORES		16	/* Number of Real cores per cpu */
 #define CORETEMP_NAME_LENGTH	17	/* String Length of attrs */
-#define MAX_ATTRS		5	/* Maximum no of per-core attrs */
+#define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
+#define MAX_THRESH_ATTRS	3	/* Maximum no of Threshold attrs */
+#define TOTAL_ATTRS		(MAX_CORE_ATTRS + MAX_THRESH_ATTRS)
 #define MAX_CORE_DATA		(NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
 
 #ifdef CONFIG_SMP
@@ -67,6 +69,9 @@
  *		This value is passed as "id" field to rdmsr/wrmsr functions.
  * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS,
  *		from where the temperature values should be read.
+ * @intrpt_reg: One of IA32_THERM_INTERRUPT or IA32_PACKAGE_THERM_INTERRUPT,
+ *		from where the thresholds are read.
+ * @attr_size:  Total number of pre-core attrs displayed in the sysfs.
  * @is_pkg_data: If this is 1, the temp_data holds pkgtemp data.
  *		Otherwise, temp_data holds coretemp data.
  * @valid: If this is 1, the current temperature is valid.
@@ -74,15 +79,18 @@
 struct temp_data {
 	int temp;
 	int ttarget;
+	int tmin;
 	int tjmax;
 	unsigned long last_updated;
 	unsigned int cpu;
 	u32 cpu_core_id;
 	u32 status_reg;
+	u32 intrpt_reg;
+	int attr_size;
 	bool is_pkg_data;
 	bool valid;
-	struct sensor_device_attribute sd_attrs[MAX_ATTRS];
-	char attr_name[MAX_ATTRS][CORETEMP_NAME_LENGTH];
+	struct sensor_device_attribute sd_attrs[TOTAL_ATTRS];
+	char attr_name[TOTAL_ATTRS][CORETEMP_NAME_LENGTH];
 	struct mutex update_lock;
 };
 
@@ -135,6 +143,19 @@ static ssize_t show_crit_alarm(struct device *dev,
 	return sprintf(buf, "%d\n", (eax >> 5) & 1);
 }
 
+static ssize_t show_max_alarm(struct device *dev,
+				struct device_attribute *devattr, char *buf)
+{
+	u32 eax, edx;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct platform_data *pdata = dev_get_drvdata(dev);
+	struct temp_data *tdata = pdata->core_data[attr->index];
+
+	rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx);
+
+	return sprintf(buf, "%d\n", !!(eax & THERM_STATUS_THRESHOLD1));
+}
+
 static ssize_t show_tjmax(struct device *dev,
 			struct device_attribute *devattr, char *buf)
 {
@@ -153,6 +174,83 @@ static ssize_t show_ttarget(struct device *dev,
 	return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget);
 }
 
+static ssize_t store_ttarget(struct device *dev,
+				struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	struct platform_data *pdata = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct temp_data *tdata = pdata->core_data[attr->index];
+	u32 eax, edx;
+	unsigned long val;
+	int diff;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	/*
+	 * THERM_MASK_THRESHOLD1 is 7 bits wide. Values are entered in terms
+	 * of milli degree celsius. Hence don't accept val > (127 * 1000)
+	 */
+	if (val > tdata->tjmax || val > 127000)
+		return -EINVAL;
+
+	diff = (tdata->tjmax - val) / 1000;
+
+	mutex_lock(&tdata->update_lock);
+	rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
+	eax = (eax & ~THERM_MASK_THRESHOLD1) |
+				(diff << THERM_SHIFT_THRESHOLD1);
+	wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
+	tdata->ttarget = val;
+	mutex_unlock(&tdata->update_lock);
+
+	return count;
+}
+
+static ssize_t show_tmin(struct device *dev,
+			struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct platform_data *pdata = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tmin);
+}
+
+static ssize_t store_tmin(struct device *dev,
+				struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	struct platform_data *pdata = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct temp_data *tdata = pdata->core_data[attr->index];
+	u32 eax, edx;
+	unsigned long val;
+	int diff;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	/*
+	 * THERM_MASK_THRESHOLD0 is 7 bits wide. Values are entered in terms
+	 * of milli degree celsius. Hence don't accept val > (127 * 1000)
+	 */
+	if (val > tdata->tjmax || val > 127000)
+		return -EINVAL;
+
+	diff = (tdata->tjmax - val) / 1000;
+
+	mutex_lock(&tdata->update_lock);
+	rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
+	eax = (eax & ~THERM_MASK_THRESHOLD0) |
+				(diff << THERM_SHIFT_THRESHOLD0);
+	wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
+	tdata->tmin = val;
+	mutex_unlock(&tdata->update_lock);
+
+	return count;
+}
+
 static ssize_t show_temp(struct device *dev,
 			struct device_attribute *devattr, char *buf)
 {
@@ -344,23 +442,31 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev,
 				int attr_no)
 {
 	int err, i;
-	static ssize_t (*rd_ptr[MAX_ATTRS]) (struct device *dev,
+	static ssize_t (*rd_ptr[TOTAL_ATTRS]) (struct device *dev,
 			struct device_attribute *devattr, char *buf) = {
-			show_label, show_crit_alarm, show_ttarget,
-			show_temp, show_tjmax };
-	static const char *names[MAX_ATTRS] = {
+			show_label, show_crit_alarm, show_temp, show_tjmax,
+			show_max_alarm, show_ttarget, show_tmin };
+	static ssize_t (*rw_ptr[TOTAL_ATTRS]) (struct device *dev,
+			struct device_attribute *devattr, const char *buf,
+			size_t count) = { NULL, NULL, NULL, NULL, NULL,
+					store_ttarget, store_tmin };
+	static const char *names[TOTAL_ATTRS] = {
 					"temp%d_label", "temp%d_crit_alarm",
-					"temp%d_max", "temp%d_input",
-					"temp%d_crit" };
+					"temp%d_input", "temp%d_crit",
+					"temp%d_max_alarm", "temp%d_max",
+					"temp%d_max_hyst" };
 
-	for (i = 0; i < MAX_ATTRS; i++) {
+	for (i = 0; i < tdata->attr_size; i++) {
 		snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i],
 			attr_no);
 		sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr);
 		tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i];
 		tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO;
+		if (rw_ptr[i]) {
+			tdata->sd_attrs[i].dev_attr.attr.mode |= S_IWUSR;
+			tdata->sd_attrs[i].dev_attr.store = rw_ptr[i];
+		}
 		tdata->sd_attrs[i].dev_attr.show = rd_ptr[i];
-		tdata->sd_attrs[i].dev_attr.store = NULL;
 		tdata->sd_attrs[i].index = attr_no;
 		err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr);
 		if (err)
@@ -374,38 +480,6 @@ exit_free:
 	return err;
 }
 
-static void update_ttarget(__u8 cpu_model, struct temp_data *tdata,
-				struct device *dev)
-{
-	int err;
-	u32 eax, edx;
-
-	/*
-	 * Initialize ttarget value. Eventually this will be
-	 * initialized with the value from MSR_IA32_THERM_INTERRUPT
-	 * register. If IA32_TEMPERATURE_TARGET is supported, this
-	 * value will be over written below.
-	 * To Do: Patch to initialize ttarget from MSR_IA32_THERM_INTERRUPT
-	 */
-	tdata->ttarget = tdata->tjmax - 20000;
-
-	/*
-	 * Read the still undocumented IA32_TEMPERATURE_TARGET. It exists
-	 * on older CPUs but not in this register,
-	 * Atoms don't have it either.
-	 */
-	if (cpu_model > 0xe && cpu_model != 0x1c) {
-		err = rdmsr_safe_on_cpu(tdata->cpu,
-				MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
-		if (err) {
-			dev_warn(dev,
-			"Unable to read IA32_TEMPERATURE_TARGET MSR\n");
-		} else {
-			tdata->ttarget = tdata->tjmax -
-					((eax >> 8) & 0xff) * 1000;
-		}
-	}
-}
 
 static int __devinit chk_ucode_version(struct platform_device *pdev)
 {
@@ -464,9 +538,12 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag)
 
 	tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS :
 							MSR_IA32_THERM_STATUS;
+	tdata->intrpt_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_INTERRUPT :
+						MSR_IA32_THERM_INTERRUPT;
 	tdata->is_pkg_data = pkg_flag;
 	tdata->cpu = cpu;
 	tdata->cpu_core_id = TO_CORE_ID(cpu);
+	tdata->attr_size = MAX_CORE_ATTRS;
 	mutex_init(&tdata->update_lock);
 	return tdata;
 }
@@ -516,7 +593,17 @@ static int create_core_data(struct platform_data *pdata,
 	else
 		tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
 
-	update_ttarget(c->x86_model, tdata, &pdev->dev);
+	/*
+	 * Test if we can access the intrpt register. If so, increase the
+	 * 'size' enough to have ttarget/tmin/max_alarm interfaces.
+	 * Initialize ttarget with bits 16:22 of MSR_IA32_THERM_INTERRUPT
+	 */
+	err = rdmsr_safe_on_cpu(cpu, tdata->intrpt_reg, &eax, &edx);
+	if (!err) {
+		tdata->attr_size += MAX_THRESH_ATTRS;
+		tdata->ttarget = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000;
+	}
+
 	pdata->core_data[attr_no] = tdata;
 
 	/* Create sysfs interfaces */
@@ -553,7 +640,7 @@ static void coretemp_remove_core(struct platform_data *pdata,
 	struct temp_data *tdata = pdata->core_data[indx];
 
 	/* Remove the sysfs attributes */
-	for (i = 0; i < MAX_ATTRS; i++)
+	for (i = 0; i < tdata->attr_size; i++)
 		device_remove_file(dev, &tdata->sd_attrs[i].dev_attr);
 
 	kfree(pdata->core_data[indx]);
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 2f94f9504804..90ddb8774210 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -54,6 +54,9 @@
  * and extended mode. They are mostly compatible with LM90 except for a data
  * format difference for the temperature value registers.
  *
+ * This driver also supports the SA56004 from Philips. This device is
+ * pin-compatible with the LM86, the ED/EDP parts are also address-compatible.
+ *
  * Since the LM90 was the first chipset supported by this driver, most
  * comments will refer to this chipset, but are actually general and
  * concern all supported chipsets, unless mentioned otherwise.
@@ -96,13 +99,15 @@
  * MAX6659 can have address 0x4c, 0x4d or 0x4e.
  * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
  * 0x4c, 0x4d or 0x4e.
+ * SA56004 can have address 0x48 through 0x4F.
  */
 
 static const unsigned short normal_i2c[] = {
-	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
+	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+	0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
 enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
-	max6646, w83l771, max6696 };
+	max6646, w83l771, max6696, sa56004 };
 
 /*
  * The LM90 registers
@@ -152,6 +157,10 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define MAX6659_REG_R_LOCAL_EMERG	0x17
 #define MAX6659_REG_W_LOCAL_EMERG	0x17
 
+/*  SA56004 registers */
+
+#define SA56004_REG_R_LOCAL_TEMPL 0x22
+
 #define LM90_DEF_CONVRATE_RVAL	6	/* Def conversion rate register value */
 #define LM90_MAX_CONVRATE_MS	16000	/* Maximum conversion rate in ms */
 
@@ -161,7 +170,6 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define LM90_FLAG_ADT7461_EXT	(1 << 0) /* ADT7461 extended mode	*/
 /* Device features */
 #define LM90_HAVE_OFFSET	(1 << 1) /* temperature offset register	*/
-#define LM90_HAVE_LOCAL_EXT	(1 << 2) /* extended local temperature	*/
 #define LM90_HAVE_REM_LIMIT_EXT	(1 << 3) /* extended remote limit	*/
 #define LM90_HAVE_EMERGENCY	(1 << 4) /* 3rd upper (emergency) limit	*/
 #define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm		*/
@@ -192,6 +200,7 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "max6696", max6696 },
 	{ "nct1008", adt7461 },
 	{ "w83l771", w83l771 },
+	{ "sa56004", sa56004 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm90_id);
@@ -204,6 +213,7 @@ struct lm90_params {
 	u16 alert_alarms;	/* Which alarm bits trigger ALERT# */
 				/* Upper 8 bits for max6695/96 */
 	u8 max_convrate;	/* Maximum conversion rate register value */
+	u8 reg_local_ext;	/* Extended local temp register (optional) */
 };
 
 static const struct lm90_params lm90_params[] = {
@@ -235,19 +245,20 @@ static const struct lm90_params lm90_params[] = {
 		.max_convrate = 9,
 	},
 	[max6646] = {
-		.flags = LM90_HAVE_LOCAL_EXT,
 		.alert_alarms = 0x7c,
 		.max_convrate = 6,
+		.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
 	},
 	[max6657] = {
-		.flags = LM90_HAVE_LOCAL_EXT,
 		.alert_alarms = 0x7c,
 		.max_convrate = 8,
+		.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
 	},
 	[max6659] = {
-		.flags = LM90_HAVE_LOCAL_EXT | LM90_HAVE_EMERGENCY,
+		.flags = LM90_HAVE_EMERGENCY,
 		.alert_alarms = 0x7c,
 		.max_convrate = 8,
+		.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
 	},
 	[max6680] = {
 		.flags = LM90_HAVE_OFFSET,
@@ -255,16 +266,23 @@ static const struct lm90_params lm90_params[] = {
 		.max_convrate = 7,
 	},
 	[max6696] = {
-		.flags = LM90_HAVE_LOCAL_EXT | LM90_HAVE_EMERGENCY
+		.flags = LM90_HAVE_EMERGENCY
 		  | LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3,
 		.alert_alarms = 0x187c,
 		.max_convrate = 6,
+		.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
 	},
 	[w83l771] = {
 		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
 		.alert_alarms = 0x7c,
 		.max_convrate = 8,
 	},
+	[sa56004] = {
+		.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
+		.alert_alarms = 0x7b,
+		.max_convrate = 9,
+		.reg_local_ext = SA56004_REG_R_LOCAL_TEMPL,
+	},
 };
 
 /*
@@ -286,6 +304,7 @@ struct lm90_data {
 	u16 alert_alarms;	/* Which alarm bits trigger ALERT# */
 				/* Upper 8 bits for max6695/96 */
 	u8 max_convrate;	/* Maximum conversion rate */
+	u8 reg_local_ext;	/* local extension register offset */
 
 	/* registers values */
 	s8 temp8[8];	/* 0: local low limit
@@ -452,9 +471,9 @@ static struct lm90_data *lm90_update_device(struct device *dev)
 		lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, &data->temp8[3]);
 		lm90_read_reg(client, LM90_REG_R_TCRIT_HYST, &data->temp_hyst);
 
-		if (data->flags & LM90_HAVE_LOCAL_EXT) {
+		if (data->reg_local_ext) {
 			lm90_read16(client, LM90_REG_R_LOCAL_TEMP,
-				    MAX6657_REG_R_LOCAL_TEMPL,
+				    data->reg_local_ext,
 				    &data->temp11[4]);
 		} else {
 			if (lm90_read_reg(client, LM90_REG_R_LOCAL_TEMP,
@@ -1092,7 +1111,7 @@ static int lm90_detect(struct i2c_client *new_client,
 	struct i2c_adapter *adapter = new_client->adapter;
 	int address = new_client->addr;
 	const char *name = NULL;
-	int man_id, chip_id, reg_config1, reg_convrate;
+	int man_id, chip_id, reg_config1, reg_config2, reg_convrate;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
@@ -1108,15 +1127,16 @@ static int lm90_detect(struct i2c_client *new_client,
 						LM90_REG_R_CONVRATE)) < 0)
 		return -ENODEV;
 
-	if ((address == 0x4C || address == 0x4D)
-	 && man_id == 0x01) { /* National Semiconductor */
-		int reg_config2;
-
+	if (man_id == 0x01 || man_id == 0x5C || man_id == 0x41) {
 		reg_config2 = i2c_smbus_read_byte_data(new_client,
 						LM90_REG_R_CONFIG2);
 		if (reg_config2 < 0)
 			return -ENODEV;
+	} else
+		reg_config2 = 0;	/* Make compiler happy */
 
+	if ((address == 0x4C || address == 0x4D)
+	 && man_id == 0x01) { /* National Semiconductor */
 		if ((reg_config1 & 0x2A) == 0x00
 		 && (reg_config2 & 0xF8) == 0x00
 		 && reg_convrate <= 0x09) {
@@ -1245,13 +1265,6 @@ static int lm90_detect(struct i2c_client *new_client,
 	} else
 	if (address == 0x4C
 	 && man_id == 0x5C) { /* Winbond/Nuvoton */
-		int reg_config2;
-
-		reg_config2 = i2c_smbus_read_byte_data(new_client,
-						LM90_REG_R_CONFIG2);
-		if (reg_config2 < 0)
-			return -ENODEV;
-
 		if ((reg_config1 & 0x2A) == 0x00
 		 && (reg_config2 & 0xF8) == 0x00) {
 			if (chip_id == 0x01 /* W83L771W/G */
@@ -1263,6 +1276,15 @@ static int lm90_detect(struct i2c_client *new_client,
 				name = "w83l771";
 			}
 		}
+	} else
+	if (address >= 0x48 && address <= 0x4F
+	 && man_id == 0xA1) { /*  NXP Semiconductor/Philips */
+		if (chip_id == 0x00
+		 && (reg_config1 & 0x2A) == 0x00
+		 && (reg_config2 & 0xFE) == 0x00
+		 && reg_convrate <= 0x09) {
+			name = "sa56004";
+		}
 	}
 
 	if (!name) { /* identification failed */
@@ -1368,6 +1390,7 @@ static int lm90_probe(struct i2c_client *new_client,
 
 	/* Set chip capabilities */
 	data->flags = lm90_params[data->kind].flags;
+	data->reg_local_ext = lm90_params[data->kind].reg_local_ext;
 
 	/* Set maximum conversion rate */
 	data->max_convrate = lm90_params[data->kind].max_convrate;
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index d3b464b74ced..513901d592a9 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -74,8 +74,9 @@ static const unsigned short normal_i2c[] = {
 #define TT_OFF 0
 #define TT_ON 1
 #define TT_MASK 7
-#define MANUFACTURER_ID 0x01
-#define DEFAULT_REVISION 0xA4
+#define NATSEMI_MAN_ID	0x01
+#define LM95231_CHIP_ID	0xA1
+#define LM95241_CHIP_ID	0xA4
 
 static const u8 lm95241_reg_address[] = {
 	LM95241_REG_R_LOCAL_TEMPH,
@@ -338,20 +339,25 @@ static int lm95241_detect(struct i2c_client *new_client,
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = new_client->adapter;
-	int address = new_client->addr;
 	const char *name;
+	int mfg_id, chip_id;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
-	     == MANUFACTURER_ID)
-	    && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
-		== DEFAULT_REVISION)) {
-		name = DEVNAME;
-	} else {
-		dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
-			address);
+	mfg_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID);
+	if (mfg_id != NATSEMI_MAN_ID)
+		return -ENODEV;
+
+	chip_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID);
+	switch (chip_id) {
+	case LM95231_CHIP_ID:
+		name = "lm95231";
+		break;
+	case LM95241_CHIP_ID:
+		name = "lm95241";
+		break;
+	default:
 		return -ENODEV;
 	}
 
@@ -431,7 +437,8 @@ static int lm95241_remove(struct i2c_client *client)
 
 /* Driver data (common to all clients) */
 static const struct i2c_device_id lm95241_id[] = {
-	{ DEVNAME, 0 },
+	{ "lm95231", 0 },
+	{ "lm95241", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm95241_id);
diff --git a/drivers/hwmon/lm95245.c b/drivers/hwmon/lm95245.c
new file mode 100644
index 000000000000..dce9e68241e6
--- /dev/null
+++ b/drivers/hwmon/lm95245.c
@@ -0,0 +1,543 @@
+/*
+ * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com>
+ *
+ * The LM95245 is a sensor chip made by National Semiconductors.
+ * It reports up to two temperatures (its own plus an external one).
+ * Complete datasheet can be obtained from National's website at:
+ *   http://www.national.com/ds.cgi/LM/LM95245.pdf
+ *
+ * This driver is based on lm95241.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+
+#define DEVNAME "lm95245"
+
+static const unsigned short normal_i2c[] = {
+	0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END };
+
+/* LM95245 registers */
+/* general registers */
+#define LM95245_REG_RW_CONFIG1		0x03
+#define LM95245_REG_RW_CONVERS_RATE	0x04
+#define LM95245_REG_W_ONE_SHOT		0x0F
+
+/* diode configuration */
+#define LM95245_REG_RW_CONFIG2		0xBF
+#define LM95245_REG_RW_REMOTE_OFFH	0x11
+#define LM95245_REG_RW_REMOTE_OFFL	0x12
+
+/* status registers */
+#define LM95245_REG_R_STATUS1		0x02
+#define LM95245_REG_R_STATUS2		0x33
+
+/* limit registers */
+#define LM95245_REG_RW_REMOTE_OS_LIMIT		0x07
+#define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT	0x20
+#define LM95245_REG_RW_REMOTE_TCRIT_LIMIT	0x19
+#define LM95245_REG_RW_COMMON_HYSTERESIS	0x21
+
+/* temperature signed */
+#define LM95245_REG_R_LOCAL_TEMPH_S	0x00
+#define LM95245_REG_R_LOCAL_TEMPL_S	0x30
+#define LM95245_REG_R_REMOTE_TEMPH_S	0x01
+#define LM95245_REG_R_REMOTE_TEMPL_S	0x10
+/* temperature unsigned */
+#define LM95245_REG_R_REMOTE_TEMPH_U	0x31
+#define LM95245_REG_R_REMOTE_TEMPL_U	0x32
+
+/* id registers */
+#define LM95245_REG_R_MAN_ID		0xFE
+#define LM95245_REG_R_CHIP_ID		0xFF
+
+/* LM95245 specific bitfields */
+#define CFG_STOP		0x40
+#define CFG_REMOTE_TCRIT_MASK	0x10
+#define CFG_REMOTE_OS_MASK	0x08
+#define CFG_LOCAL_TCRIT_MASK	0x04
+#define CFG_LOCAL_OS_MASK	0x02
+
+#define CFG2_OS_A0		0x40
+#define CFG2_DIODE_FAULT_OS	0x20
+#define CFG2_DIODE_FAULT_TCRIT	0x10
+#define CFG2_REMOTE_TT		0x08
+#define CFG2_REMOTE_FILTER_DIS	0x00
+#define CFG2_REMOTE_FILTER_EN	0x06
+
+/* conversation rate in ms */
+#define RATE_CR0063	0x00
+#define RATE_CR0364	0x01
+#define RATE_CR1000	0x02
+#define RATE_CR2500	0x03
+
+#define STATUS1_DIODE_FAULT	0x04
+#define STATUS1_RTCRIT		0x02
+#define STATUS1_LOC		0x01
+
+#define MANUFACTURER_ID		0x01
+#define DEFAULT_REVISION	0xB3
+
+static const u8 lm95245_reg_address[] = {
+	LM95245_REG_R_LOCAL_TEMPH_S,
+	LM95245_REG_R_LOCAL_TEMPL_S,
+	LM95245_REG_R_REMOTE_TEMPH_S,
+	LM95245_REG_R_REMOTE_TEMPL_S,
+	LM95245_REG_R_REMOTE_TEMPH_U,
+	LM95245_REG_R_REMOTE_TEMPL_U,
+	LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT,
+	LM95245_REG_RW_REMOTE_TCRIT_LIMIT,
+	LM95245_REG_RW_COMMON_HYSTERESIS,
+	LM95245_REG_R_STATUS1,
+};
+
+/* Client data (each client gets its own) */
+struct lm95245_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	unsigned long last_updated;	/* in jiffies */
+	unsigned long interval;	/* in msecs */
+	bool valid;		/* zero until following fields are valid */
+	/* registers values */
+	u8 regs[ARRAY_SIZE(lm95245_reg_address)];
+	u8 config1, config2;
+};
+
+/* Conversions */
+static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
+{
+	return val_h * 1000 + val_l * 1000 / 256;
+}
+
+static int temp_from_reg_signed(u8 val_h, u8 val_l)
+{
+	if (val_h & 0x80)
+		return (val_h - 0x100) * 1000;
+	return temp_from_reg_unsigned(val_h, val_l);
+}
+
+static struct lm95245_data *lm95245_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95245_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated
+		+ msecs_to_jiffies(data->interval)) || !data->valid) {
+		int i;
+
+		dev_dbg(&client->dev, "Updating lm95245 data.\n");
+		for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++)
+			data->regs[i]
+			  = i2c_smbus_read_byte_data(client,
+						     lm95245_reg_address[i]);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+static unsigned long lm95245_read_conversion_rate(struct i2c_client *client)
+{
+	int rate;
+	unsigned long interval;
+
+	rate = i2c_smbus_read_byte_data(client, LM95245_REG_RW_CONVERS_RATE);
+
+	switch (rate) {
+	case RATE_CR0063:
+		interval = 63;
+		break;
+	case RATE_CR0364:
+		interval = 364;
+		break;
+	case RATE_CR1000:
+		interval = 1000;
+		break;
+	case RATE_CR2500:
+	default:
+		interval = 2500;
+		break;
+	}
+
+	return interval;
+}
+
+static unsigned long lm95245_set_conversion_rate(struct i2c_client *client,
+			unsigned long interval)
+{
+	int rate;
+
+	if (interval <= 63) {
+		interval = 63;
+		rate = RATE_CR0063;
+	} else if (interval <= 364) {
+		interval = 364;
+		rate = RATE_CR0364;
+	} else if (interval <= 1000) {
+		interval = 1000;
+		rate = RATE_CR1000;
+	} else {
+		interval = 2500;
+		rate = RATE_CR2500;
+	}
+
+	i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONVERS_RATE, rate);
+
+	return interval;
+}
+
+/* Sysfs stuff */
+static ssize_t show_input(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct lm95245_data *data = lm95245_update_device(dev);
+	int temp;
+	int index = to_sensor_dev_attr(attr)->index;
+
+	/*
+	 * Index 0 (Local temp) is always signed
+	 * Index 2 (Remote temp) has both signed and unsigned data
+	 * use signed calculation for remote if signed bit is set
+	 */
+	if (index == 0 || data->regs[index] & 0x80)
+		temp = temp_from_reg_signed(data->regs[index],
+			    data->regs[index + 1]);
+	else
+		temp = temp_from_reg_unsigned(data->regs[index + 2],
+			    data->regs[index + 3]);
+
+	return snprintf(buf, PAGE_SIZE - 1, "%d\n", temp);
+}
+
+static ssize_t show_limit(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct lm95245_data *data = lm95245_update_device(dev);
+	int index = to_sensor_dev_attr(attr)->index;
+
+	return snprintf(buf, PAGE_SIZE - 1, "%d\n",
+			data->regs[index] * 1000);
+}
+
+static ssize_t set_limit(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95245_data *data = i2c_get_clientdata(client);
+	int index = to_sensor_dev_attr(attr)->index;
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	val /= 1000;
+
+	val = SENSORS_LIMIT(val, 0, (index == 6 ? 127 : 255));
+
+	mutex_lock(&data->update_lock);
+
+	data->valid = 0;
+
+	i2c_smbus_write_byte_data(client, lm95245_reg_address[index], val);
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95245_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	val /= 1000;
+
+	val = SENSORS_LIMIT(val, 0, 31);
+
+	mutex_lock(&data->update_lock);
+
+	data->valid = 0;
+
+	/* shared crit hysteresis */
+	i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS,
+		val);
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t show_type(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95245_data *data = i2c_get_clientdata(client);
+
+	return snprintf(buf, PAGE_SIZE - 1,
+		data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n");
+}
+
+static ssize_t set_type(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95245_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val != 1 && val != 2)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	if (val == 1)
+		data->config2 |= CFG2_REMOTE_TT;
+	else
+		data->config2 &= ~CFG2_REMOTE_TT;
+
+	data->valid = 0;
+
+	i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG2,
+				  data->config2);
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct lm95245_data *data = lm95245_update_device(dev);
+	int index = to_sensor_dev_attr(attr)->index;
+
+	return snprintf(buf, PAGE_SIZE - 1, "%d\n",
+			!!(data->regs[9] & index));
+}
+
+static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct lm95245_data *data = lm95245_update_device(dev);
+
+	return snprintf(buf, PAGE_SIZE - 1, "%lu\n", data->interval);
+}
+
+static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95245_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	data->interval = lm95245_set_conversion_rate(client, val);
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit,
+		set_limit, 6);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit,
+		set_crit_hyst, 8);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
+		STATUS1_LOC);
+
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit,
+		set_limit, 7);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit,
+		set_crit_hyst, 8);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL,
+		STATUS1_RTCRIT);
+static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type,
+		set_type, 0);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL,
+		STATUS1_DIODE_FAULT);
+
+static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
+		set_interval);
+
+static struct attribute *lm95245_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_type.dev_attr.attr,
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&dev_attr_update_interval.attr,
+	NULL
+};
+
+static const struct attribute_group lm95245_group = {
+	.attrs = lm95245_attributes,
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm95245_detect(struct i2c_client *new_client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID)
+			!= MANUFACTURER_ID
+		|| i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID)
+			!= DEFAULT_REVISION)
+		return -ENODEV;
+
+	strlcpy(info->type, DEVNAME, I2C_NAME_SIZE);
+	return 0;
+}
+
+static void lm95245_init_client(struct i2c_client *client)
+{
+	struct lm95245_data *data = i2c_get_clientdata(client);
+
+	data->valid = 0;
+	data->interval = lm95245_read_conversion_rate(client);
+
+	data->config1 = i2c_smbus_read_byte_data(client,
+		LM95245_REG_RW_CONFIG1);
+	data->config2 = i2c_smbus_read_byte_data(client,
+		LM95245_REG_RW_CONFIG2);
+
+	if (data->config1 & CFG_STOP) {
+		/* Clear the standby bit */
+		data->config1 &= ~CFG_STOP;
+		i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG1,
+			data->config1);
+	}
+}
+
+static int lm95245_probe(struct i2c_client *new_client,
+			 const struct i2c_device_id *id)
+{
+	struct lm95245_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct lm95245_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(new_client, data);
+	mutex_init(&data->update_lock);
+
+	/* Initialize the LM95245 chip */
+	lm95245_init_client(new_client);
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&new_client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+exit_remove_files:
+	sysfs_remove_group(&new_client->dev.kobj, &lm95245_group);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int lm95245_remove(struct i2c_client *client)
+{
+	struct lm95245_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &lm95245_group);
+
+	kfree(data);
+	return 0;
+}
+
+/* Driver data (common to all clients) */
+static const struct i2c_device_id lm95245_id[] = {
+	{ DEVNAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm95245_id);
+
+static struct i2c_driver lm95245_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= DEVNAME,
+	},
+	.probe		= lm95245_probe,
+	.remove		= lm95245_remove,
+	.id_table	= lm95245_id,
+	.detect		= lm95245_detect,
+	.address_list	= normal_i2c,
+};
+
+static int __init sensors_lm95245_init(void)
+{
+	return i2c_add_driver(&lm95245_driver);
+}
+
+static void __exit sensors_lm95245_exit(void)
+{
+	i2c_del_driver(&lm95245_driver);
+}
+
+MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
+MODULE_DESCRIPTION("LM95245 sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm95245_init);
+module_exit(sensors_lm95245_exit);
diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c
new file mode 100644
index 000000000000..20d1b2ddffb6
--- /dev/null
+++ b/drivers/hwmon/max1668.c
@@ -0,0 +1,502 @@
+/*
+    Copyright (c) 2011 David George <david.george@ska.ac.za>
+
+    based on adm1021.c
+    some credit to Christoph Scheurer, but largely a rewrite
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static unsigned short max1668_addr_list[] = {
+	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
+
+/* max1668 registers */
+
+#define MAX1668_REG_TEMP(nr)	(nr)
+#define MAX1668_REG_STAT1	0x05
+#define MAX1668_REG_STAT2	0x06
+#define MAX1668_REG_MAN_ID	0xfe
+#define MAX1668_REG_DEV_ID	0xff
+
+/* limits */
+
+/* write high limits */
+#define MAX1668_REG_LIMH_WR(nr)	(0x13 + 2 * (nr))
+/* write low limits */
+#define MAX1668_REG_LIML_WR(nr)	(0x14 + 2 * (nr))
+/* read high limits */
+#define MAX1668_REG_LIMH_RD(nr)	(0x08 + 2 * (nr))
+/* read low limits */
+#define MAX1668_REG_LIML_RD(nr)	(0x09 + 2 * (nr))
+
+/* manufacturer and device ID Constants */
+#define MAN_ID_MAXIM		0x4d
+#define DEV_ID_MAX1668		0x3
+#define DEV_ID_MAX1805		0x5
+#define DEV_ID_MAX1989		0xb
+
+/* read only mode module parameter */
+static int read_only;
+module_param(read_only, bool, 0);
+MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
+
+enum chips { max1668, max1805, max1989 };
+
+struct max1668_data {
+	struct device *hwmon_dev;
+	enum chips type;
+
+	struct mutex update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	/* 1x local and 4x remote */
+	s8 temp_max[5];
+	s8 temp_min[5];
+	s8 temp[5];
+	u16 alarms;
+};
+
+static struct max1668_data *max1668_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max1668_data *data = i2c_get_clientdata(client);
+	struct max1668_data *ret = data;
+	s32 val;
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (data->valid && !time_after(jiffies,
+			data->last_updated + HZ + HZ / 2))
+		goto abort;
+
+	for (i = 0; i < 5; i++) {
+		val = i2c_smbus_read_byte_data(client, MAX1668_REG_TEMP(i));
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp[i] = (s8) val;
+
+		val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIMH_RD(i));
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_max[i] = (s8) val;
+
+		val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIML_RD(i));
+		if (unlikely(val < 0)) {
+			ret = ERR_PTR(val);
+			goto abort;
+		}
+		data->temp_min[i] = (s8) val;
+	}
+
+	val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT1);
+	if (unlikely(val < 0)) {
+		ret = ERR_PTR(val);
+		goto abort;
+	}
+	data->alarms = val << 8;
+
+	val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT2);
+	if (unlikely(val < 0)) {
+		ret = ERR_PTR(val);
+		goto abort;
+	}
+	data->alarms |= val;
+
+	data->last_updated = jiffies;
+	data->valid = 1;
+abort:
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static ssize_t show_temp(struct device *dev,
+			 struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct max1668_data *data = max1668_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%d\n", data->temp[index] * 1000);
+}
+
+static ssize_t show_temp_max(struct device *dev,
+			     struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct max1668_data *data = max1668_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%d\n", data->temp_max[index] * 1000);
+}
+
+static ssize_t show_temp_min(struct device *dev,
+			     struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct max1668_data *data = max1668_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%d\n", data->temp_min[index] * 1000);
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int index = to_sensor_dev_attr(attr)->index;
+	struct max1668_data *data = max1668_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%u\n", (data->alarms >> index) & 0x1);
+}
+
+static ssize_t show_fault(struct device *dev,
+			  struct device_attribute *devattr, char *buf)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct max1668_data *data = max1668_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%u\n",
+		       (data->alarms & (1 << 12)) && data->temp[index] == 127);
+}
+
+static ssize_t set_temp_max(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max1668_data *data = i2c_get_clientdata(client);
+	long temp;
+	int ret;
+
+	ret = kstrtol(buf, 10, &temp);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&data->update_lock);
+	data->temp_max[index] = SENSORS_LIMIT(temp/1000, -128, 127);
+	if (i2c_smbus_write_byte_data(client,
+					MAX1668_REG_LIMH_WR(index),
+					data->temp_max[index]))
+		count = -EIO;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t set_temp_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf, size_t count)
+{
+	int index = to_sensor_dev_attr(devattr)->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max1668_data *data = i2c_get_clientdata(client);
+	long temp;
+	int ret;
+
+	ret = kstrtol(buf, 10, &temp);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&data->update_lock);
+	data->temp_min[index] = SENSORS_LIMIT(temp/1000, -128, 127);
+	if (i2c_smbus_write_byte_data(client,
+					MAX1668_REG_LIML_WR(index),
+					data->temp_max[index]))
+		count = -EIO;
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max,
+				set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min,
+				set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max,
+				set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp_min,
+				set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max,
+				set_temp_max, 2);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp_min,
+				set_temp_min, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max,
+				set_temp_max, 3);
+static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO, show_temp_min,
+				set_temp_min, 3);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max,
+				set_temp_max, 4);
+static SENSOR_DEVICE_ATTR(temp5_min, S_IRUGO, show_temp_min,
+				set_temp_min, 4);
+
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp5_min_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL, 0);
+
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_fault, NULL, 4);
+
+/* Attributes common to MAX1668, MAX1989 and MAX1805 */
+static struct attribute *max1668_attribute_common[] = {
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	NULL
+};
+
+/* Attributes not present on MAX1805 */
+static struct attribute *max1668_attribute_unique[] = {
+	&sensor_dev_attr_temp4_max.dev_attr.attr,
+	&sensor_dev_attr_temp4_min.dev_attr.attr,
+	&sensor_dev_attr_temp4_input.dev_attr.attr,
+	&sensor_dev_attr_temp5_max.dev_attr.attr,
+	&sensor_dev_attr_temp5_min.dev_attr.attr,
+	&sensor_dev_attr_temp5_input.dev_attr.attr,
+
+	&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp5_min_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_temp4_fault.dev_attr.attr,
+	&sensor_dev_attr_temp5_fault.dev_attr.attr,
+	NULL
+};
+
+static mode_t max1668_attribute_mode(struct kobject *kobj,
+				     struct attribute *attr, int index)
+{
+	int ret = S_IRUGO;
+	if (read_only)
+		return ret;
+	if (attr == &sensor_dev_attr_temp1_max.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp2_max.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp3_max.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp4_max.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp5_max.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp1_min.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp2_min.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp3_min.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp4_min.dev_attr.attr ||
+	    attr == &sensor_dev_attr_temp5_min.dev_attr.attr)
+		ret |= S_IWUSR;
+	return ret;
+}
+
+static const struct attribute_group max1668_group_common = {
+	.attrs = max1668_attribute_common,
+	.is_visible = max1668_attribute_mode
+};
+
+static const struct attribute_group max1668_group_unique = {
+	.attrs = max1668_attribute_unique,
+	.is_visible = max1668_attribute_mode
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max1668_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	const char *type_name;
+	int man_id, dev_id;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/* Check for unsupported part */
+	man_id = i2c_smbus_read_byte_data(client, MAX1668_REG_MAN_ID);
+	if (man_id != MAN_ID_MAXIM)
+		return -ENODEV;
+
+	dev_id = i2c_smbus_read_byte_data(client, MAX1668_REG_DEV_ID);
+	if (dev_id < 0)
+		return -ENODEV;
+
+	type_name = NULL;
+	if (dev_id == DEV_ID_MAX1668)
+		type_name = "max1668";
+	else if (dev_id == DEV_ID_MAX1805)
+		type_name = "max1805";
+	else if (dev_id == DEV_ID_MAX1989)
+		type_name = "max1989";
+
+	if (!type_name)
+		return -ENODEV;
+
+	strlcpy(info->type, type_name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int max1668_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct max1668_data *data;
+	int err;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct max1668_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->type = id->driver_data;
+	mutex_init(&data->update_lock);
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &max1668_group_common);
+	if (err)
+		goto error_free;
+
+	if (data->type == max1668 || data->type == max1989) {
+		err = sysfs_create_group(&client->dev.kobj,
+					 &max1668_group_unique);
+		if (err)
+			goto error_sysrem0;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto error_sysrem1;
+	}
+
+	return 0;
+
+error_sysrem1:
+	if (data->type == max1668 || data->type == max1989)
+		sysfs_remove_group(&client->dev.kobj, &max1668_group_unique);
+error_sysrem0:
+	sysfs_remove_group(&client->dev.kobj, &max1668_group_common);
+error_free:
+	kfree(data);
+	return err;
+}
+
+static int max1668_remove(struct i2c_client *client)
+{
+	struct max1668_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	if (data->type == max1668 || data->type == max1989)
+		sysfs_remove_group(&client->dev.kobj, &max1668_group_unique);
+
+	sysfs_remove_group(&client->dev.kobj, &max1668_group_common);
+
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id max1668_id[] = {
+	{ "max1668", max1668 },
+	{ "max1805", max1805 },
+	{ "max1989", max1989 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max1668_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max1668_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		  .name	= "max1668",
+		  },
+	.probe = max1668_probe,
+	.remove	= max1668_remove,
+	.id_table = max1668_id,
+	.detect	= max1668_detect,
+	.address_list = max1668_addr_list,
+};
+
+static int __init sensors_max1668_init(void)
+{
+	return i2c_add_driver(&max1668_driver);
+}
+
+static void __exit sensors_max1668_exit(void)
+{
+	i2c_del_driver(&max1668_driver);
+}
+
+MODULE_AUTHOR("David George <david.george@ska.ac.za>");
+MODULE_DESCRIPTION("MAX1668 remote temperature sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_max1668_init)
+module_exit(sensors_max1668_exit)
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
new file mode 100644
index 000000000000..d7926f4336b5
--- /dev/null
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -0,0 +1,453 @@
+/*
+ * ntc_thermistor.c - NTC Thermistors
+ *
+ *  Copyright (C) 2010 Samsung Electronics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/math64.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+
+#include <linux/platform_data/ntc_thermistor.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+struct ntc_compensation {
+	int		temp_C;
+	unsigned int	ohm;
+};
+
+/*
+ * A compensation table should be sorted by the values of .ohm
+ * in descending order.
+ * The following compensation tables are from the specification of Murata NTC
+ * Thermistors Datasheet
+ */
+const struct ntc_compensation ncpXXwb473[] = {
+	{ .temp_C	= -40, .ohm	= 1747920 },
+	{ .temp_C	= -35, .ohm	= 1245428 },
+	{ .temp_C	= -30, .ohm	= 898485 },
+	{ .temp_C	= -25, .ohm	= 655802 },
+	{ .temp_C	= -20, .ohm	= 483954 },
+	{ .temp_C	= -15, .ohm	= 360850 },
+	{ .temp_C	= -10, .ohm	= 271697 },
+	{ .temp_C	= -5, .ohm	= 206463 },
+	{ .temp_C	= 0, .ohm	= 158214 },
+	{ .temp_C	= 5, .ohm	= 122259 },
+	{ .temp_C	= 10, .ohm	= 95227 },
+	{ .temp_C	= 15, .ohm	= 74730 },
+	{ .temp_C	= 20, .ohm	= 59065 },
+	{ .temp_C	= 25, .ohm	= 47000 },
+	{ .temp_C	= 30, .ohm	= 37643 },
+	{ .temp_C	= 35, .ohm	= 30334 },
+	{ .temp_C	= 40, .ohm	= 24591 },
+	{ .temp_C	= 45, .ohm	= 20048 },
+	{ .temp_C	= 50, .ohm	= 16433 },
+	{ .temp_C	= 55, .ohm	= 13539 },
+	{ .temp_C	= 60, .ohm	= 11209 },
+	{ .temp_C	= 65, .ohm	= 9328 },
+	{ .temp_C	= 70, .ohm	= 7798 },
+	{ .temp_C	= 75, .ohm	= 6544 },
+	{ .temp_C	= 80, .ohm	= 5518 },
+	{ .temp_C	= 85, .ohm	= 4674 },
+	{ .temp_C	= 90, .ohm	= 3972 },
+	{ .temp_C	= 95, .ohm	= 3388 },
+	{ .temp_C	= 100, .ohm	= 2902 },
+	{ .temp_C	= 105, .ohm	= 2494 },
+	{ .temp_C	= 110, .ohm	= 2150 },
+	{ .temp_C	= 115, .ohm	= 1860 },
+	{ .temp_C	= 120, .ohm	= 1615 },
+	{ .temp_C	= 125, .ohm	= 1406 },
+};
+const struct ntc_compensation ncpXXwl333[] = {
+	{ .temp_C	= -40, .ohm	= 1610154 },
+	{ .temp_C	= -35, .ohm	= 1130850 },
+	{ .temp_C	= -30, .ohm	= 802609 },
+	{ .temp_C	= -25, .ohm	= 575385 },
+	{ .temp_C	= -20, .ohm	= 416464 },
+	{ .temp_C	= -15, .ohm	= 304219 },
+	{ .temp_C	= -10, .ohm	= 224193 },
+	{ .temp_C	= -5, .ohm	= 166623 },
+	{ .temp_C	= 0, .ohm	= 124850 },
+	{ .temp_C	= 5, .ohm	= 94287 },
+	{ .temp_C	= 10, .ohm	= 71747 },
+	{ .temp_C	= 15, .ohm	= 54996 },
+	{ .temp_C	= 20, .ohm	= 42455 },
+	{ .temp_C	= 25, .ohm	= 33000 },
+	{ .temp_C	= 30, .ohm	= 25822 },
+	{ .temp_C	= 35, .ohm	= 20335 },
+	{ .temp_C	= 40, .ohm	= 16115 },
+	{ .temp_C	= 45, .ohm	= 12849 },
+	{ .temp_C	= 50, .ohm	= 10306 },
+	{ .temp_C	= 55, .ohm	= 8314 },
+	{ .temp_C	= 60, .ohm	= 6746 },
+	{ .temp_C	= 65, .ohm	= 5503 },
+	{ .temp_C	= 70, .ohm	= 4513 },
+	{ .temp_C	= 75, .ohm	= 3721 },
+	{ .temp_C	= 80, .ohm	= 3084 },
+	{ .temp_C	= 85, .ohm	= 2569 },
+	{ .temp_C	= 90, .ohm	= 2151 },
+	{ .temp_C	= 95, .ohm	= 1809 },
+	{ .temp_C	= 100, .ohm	= 1529 },
+	{ .temp_C	= 105, .ohm	= 1299 },
+	{ .temp_C	= 110, .ohm	= 1108 },
+	{ .temp_C	= 115, .ohm	= 949 },
+	{ .temp_C	= 120, .ohm	= 817 },
+	{ .temp_C	= 125, .ohm	= 707 },
+};
+
+struct ntc_data {
+	struct device *hwmon_dev;
+	struct ntc_thermistor_platform_data *pdata;
+	const struct ntc_compensation *comp;
+	struct device *dev;
+	int n_comp;
+	char name[PLATFORM_NAME_SIZE];
+};
+
+static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
+{
+	if (divisor == 0 && dividend == 0)
+		return 0;
+	if (divisor == 0)
+		return UINT_MAX;
+	return div64_u64(dividend, divisor);
+}
+
+static unsigned int get_ohm_of_thermistor(struct ntc_data *data,
+		unsigned int uV)
+{
+	struct ntc_thermistor_platform_data *pdata = data->pdata;
+	u64 mV = uV / 1000;
+	u64 pmV = pdata->pullup_uV / 1000;
+	u64 N, puO, pdO;
+	puO = pdata->pullup_ohm;
+	pdO = pdata->pulldown_ohm;
+
+	if (mV == 0) {
+		if (pdata->connect == NTC_CONNECTED_POSITIVE)
+			return UINT_MAX;
+		return 0;
+	}
+	if (mV >= pmV)
+		return (pdata->connect == NTC_CONNECTED_POSITIVE) ?
+			0 : UINT_MAX;
+
+	if (pdata->connect == NTC_CONNECTED_POSITIVE && puO == 0)
+		N = div64_u64_safe(pdO * (pmV - mV), mV);
+	else if (pdata->connect == NTC_CONNECTED_GROUND && pdO == 0)
+		N = div64_u64_safe(puO * mV, pmV - mV);
+	else if (pdata->connect == NTC_CONNECTED_POSITIVE)
+		N = div64_u64_safe(pdO * puO * (pmV - mV),
+				puO * mV - pdO * (pmV - mV));
+	else
+		N = div64_u64_safe(pdO * puO * mV, pdO * (pmV - mV) - puO * mV);
+
+	return (unsigned int) N;
+}
+
+static int lookup_comp(struct ntc_data *data,
+		unsigned int ohm, int *i_low, int *i_high)
+{
+	int start, end, mid = -1;
+
+	/* Do a binary search on compensation table */
+	start = 0;
+	end = data->n_comp;
+
+	while (end > start) {
+		mid = start + (end - start) / 2;
+		if (data->comp[mid].ohm < ohm)
+			end = mid;
+		else if (data->comp[mid].ohm > ohm)
+			start = mid + 1;
+		else
+			break;
+	}
+
+	if (mid == 0) {
+		if (data->comp[mid].ohm > ohm) {
+			*i_high = mid;
+			*i_low = mid + 1;
+			return 0;
+		} else {
+			*i_low = mid;
+			*i_high = -1;
+			return -EINVAL;
+		}
+	}
+	if (mid == (data->n_comp - 1)) {
+		if (data->comp[mid].ohm <= ohm) {
+			*i_low = mid;
+			*i_high = mid - 1;
+			return 0;
+		} else {
+			*i_low = -1;
+			*i_high = mid;
+			return -EINVAL;
+		}
+	}
+
+	if (data->comp[mid].ohm <= ohm) {
+		*i_low = mid;
+		*i_high = mid - 1;
+	}
+	if (data->comp[mid].ohm > ohm) {
+		*i_low = mid + 1;
+		*i_high = mid;
+	}
+
+	return 0;
+}
+
+static int get_temp_mC(struct ntc_data *data, unsigned int ohm, int *temp)
+{
+	int low, high;
+	int ret;
+
+	ret = lookup_comp(data, ohm, &low, &high);
+	if (ret) {
+		/* Unable to use linear approximation */
+		if (low != -1)
+			*temp = data->comp[low].temp_C * 1000;
+		else if (high != -1)
+			*temp = data->comp[high].temp_C * 1000;
+		else
+			return ret;
+	} else {
+		*temp = data->comp[low].temp_C * 1000 +
+			((data->comp[high].temp_C - data->comp[low].temp_C) *
+			 1000 * ((int)ohm - (int)data->comp[low].ohm)) /
+			((int)data->comp[high].ohm - (int)data->comp[low].ohm);
+	}
+
+	return 0;
+}
+
+static int ntc_thermistor_read(struct ntc_data *data, int *temp)
+{
+	int ret;
+	int read_ohm, read_uV;
+	unsigned int ohm = 0;
+
+	if (data->pdata->read_ohm) {
+		read_ohm = data->pdata->read_ohm();
+		if (read_ohm < 0)
+			return read_ohm;
+		ohm = (unsigned int)read_ohm;
+	}
+
+	if (data->pdata->read_uV) {
+		read_uV = data->pdata->read_uV();
+		if (read_uV < 0)
+			return read_uV;
+		ohm = get_ohm_of_thermistor(data, (unsigned int)read_uV);
+	}
+
+	ret = get_temp_mC(data, ohm, temp);
+	if (ret) {
+		dev_dbg(data->dev, "Sensor reading function not available.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static ssize_t ntc_show_name(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ntc_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", data->name);
+}
+
+static ssize_t ntc_show_type(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "4\n");
+}
+
+static ssize_t ntc_show_temp(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct ntc_data *data = dev_get_drvdata(dev);
+	int temp, ret;
+
+	ret = ntc_thermistor_read(data, &temp);
+	if (ret)
+		return ret;
+	return sprintf(buf, "%d\n", temp);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, ntc_show_type, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ntc_show_temp, NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, ntc_show_name, NULL);
+
+static struct attribute *ntc_attributes[] = {
+	&dev_attr_name.attr,
+	&sensor_dev_attr_temp1_type.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ntc_attr_group = {
+	.attrs = ntc_attributes,
+};
+
+static int __devinit ntc_thermistor_probe(struct platform_device *pdev)
+{
+	struct ntc_data *data;
+	struct ntc_thermistor_platform_data *pdata = pdev->dev.platform_data;
+	int ret = 0;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform init data supplied.\n");
+		return -ENODEV;
+	}
+
+	/* Either one of the two is required. */
+	if (!pdata->read_uV && !pdata->read_ohm) {
+		dev_err(&pdev->dev, "Both read_uV and read_ohm missing."
+				"Need either one of the two.\n");
+		return -EINVAL;
+	}
+
+	if (pdata->read_uV && pdata->read_ohm) {
+		dev_warn(&pdev->dev, "Only one of read_uV and read_ohm "
+				"is needed; ignoring read_uV.\n");
+		pdata->read_uV = NULL;
+	}
+
+	if (pdata->read_uV && (pdata->pullup_uV == 0 ||
+				(pdata->pullup_ohm == 0 && pdata->connect ==
+				 NTC_CONNECTED_GROUND) ||
+				(pdata->pulldown_ohm == 0 && pdata->connect ==
+				 NTC_CONNECTED_POSITIVE) ||
+				(pdata->connect != NTC_CONNECTED_POSITIVE &&
+				 pdata->connect != NTC_CONNECTED_GROUND))) {
+		dev_err(&pdev->dev, "Required data to use read_uV not "
+				"supplied.\n");
+		return -EINVAL;
+	}
+
+	data = kzalloc(sizeof(struct ntc_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = &pdev->dev;
+	data->pdata = pdata;
+	strncpy(data->name, pdev->id_entry->name, PLATFORM_NAME_SIZE);
+
+	switch (pdev->id_entry->driver_data) {
+	case TYPE_NCPXXWB473:
+		data->comp = ncpXXwb473;
+		data->n_comp = ARRAY_SIZE(ncpXXwb473);
+		break;
+	case TYPE_NCPXXWL333:
+		data->comp = ncpXXwl333;
+		data->n_comp = ARRAY_SIZE(ncpXXwl333);
+		break;
+	default:
+		dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
+				pdev->id_entry->driver_data,
+				pdev->id_entry->name);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, data);
+
+	ret = sysfs_create_group(&data->dev->kobj, &ntc_attr_group);
+	if (ret) {
+		dev_err(data->dev, "unable to create sysfs files\n");
+		goto err;
+	}
+
+	data->hwmon_dev = hwmon_device_register(data->dev);
+	if (IS_ERR_OR_NULL(data->hwmon_dev)) {
+		dev_err(data->dev, "unable to register as hwmon device.\n");
+		ret = -EINVAL;
+		goto err_after_sysfs;
+	}
+
+	dev_info(&pdev->dev, "Thermistor %s:%d (type: %s/%lu) successfully probed.\n",
+			pdev->name, pdev->id, pdev->id_entry->name,
+			pdev->id_entry->driver_data);
+	return 0;
+err_after_sysfs:
+	sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
+err:
+	kfree(data);
+	return ret;
+}
+
+static int __devexit ntc_thermistor_remove(struct platform_device *pdev)
+{
+	struct ntc_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(data);
+
+	return 0;
+}
+
+static const struct platform_device_id ntc_thermistor_id[] = {
+	{ "ncp15wb473", TYPE_NCPXXWB473 },
+	{ "ncp18wb473", TYPE_NCPXXWB473 },
+	{ "ncp21wb473", TYPE_NCPXXWB473 },
+	{ "ncp03wb473", TYPE_NCPXXWB473 },
+	{ "ncp15wl333", TYPE_NCPXXWL333 },
+	{ },
+};
+
+static struct platform_driver ntc_thermistor_driver = {
+	.driver = {
+		.name = "ntc-thermistor",
+		.owner = THIS_MODULE,
+	},
+	.probe = ntc_thermistor_probe,
+	.remove = __devexit_p(ntc_thermistor_remove),
+	.id_table = ntc_thermistor_id,
+};
+
+static int __init ntc_thermistor_init(void)
+{
+	return platform_driver_register(&ntc_thermistor_driver);
+}
+
+module_init(ntc_thermistor_init);
+
+static void __exit ntc_thermistor_cleanup(void)
+{
+	platform_driver_unregister(&ntc_thermistor_driver);
+}
+
+module_exit(ntc_thermistor_cleanup);
+
+MODULE_DESCRIPTION("NTC Thermistor Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntc-thermistor");
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
new file mode 100644
index 000000000000..c9237b9dcff2
--- /dev/null
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -0,0 +1,100 @@
+#
+# PMBus chip drivers configuration
+#
+
+menuconfig PMBUS
+	tristate "PMBus support"
+	depends on I2C && EXPERIMENTAL
+	default n
+	help
+	  Say yes here if you want to enable PMBus support.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus_core.
+
+if PMBUS
+
+config SENSORS_PMBUS
+	tristate "Generic PMBus devices"
+	default y
+	help
+	  If you say yes here you get hardware monitoring support for generic
+	  PMBus devices, including but not limited to ADP4000, BMR450, BMR451,
+	  BMR453, BMR454, LTC2978, NCP4200, and NCP4208.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus.
+
+config SENSORS_ADM1275
+	tristate "Analog Devices ADM1275"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called adm1275.
+
+config SENSORS_LM25066
+	tristate "National Semiconductor LM25066 and compatibles"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for National
+	  Semiconductor LM25066, LM5064, and LM5066.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called lm25066.
+
+config SENSORS_MAX16064
+	tristate "Maxim MAX16064"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX16064.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max16064.
+
+config SENSORS_MAX34440
+	tristate "Maxim MAX34440/MAX34441"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX34440 and MAX34441.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max34440.
+
+config SENSORS_MAX8688
+	tristate "Maxim MAX8688"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX8688.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max8688.
+
+config SENSORS_UCD9000
+	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
+	  Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9000.
+
+config SENSORS_UCD9200
+	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+	  Digital PWM System Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9200.
+
+endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
new file mode 100644
index 000000000000..623eedb1ed9a
--- /dev/null
+++ b/drivers/hwmon/pmbus/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for PMBus chip drivers.
+#
+
+obj-$(CONFIG_PMBUS)		+= pmbus_core.o
+obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
+obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
+obj-$(CONFIG_SENSORS_LM25066)	+= lm25066.o
+obj-$(CONFIG_SENSORS_MAX16064)	+= max16064.o
+obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
+obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
+obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
+obj-$(CONFIG_SENSORS_UCD9200)	+= ucd9200.o
diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 8bc1bd663721..c936e2782309 100644
--- a/drivers/hwmon/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -23,11 +23,68 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
+#define ADM1275_PEAK_IOUT		0xd0
+#define ADM1275_PEAK_VIN		0xd1
+#define ADM1275_PEAK_VOUT		0xd2
 #define ADM1275_PMON_CONFIG		0xd4
 
 #define ADM1275_VIN_VOUT_SELECT		(1 << 6)
 #define ADM1275_VRANGE			(1 << 5)
 
+static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	if (page)
+		return -EINVAL;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VOUT);
+		break;
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
+				   u16 word)
+{
+	int ret;
+
+	if (page)
+		return -EINVAL;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
+		break;
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
 static int adm1275_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -50,14 +107,17 @@ static int adm1275_probe(struct i2c_client *client,
 	}
 
 	info->pages = 1;
-	info->direct[PSC_VOLTAGE_IN] = true;
-	info->direct[PSC_VOLTAGE_OUT] = true;
-	info->direct[PSC_CURRENT_OUT] = true;
+	info->format[PSC_VOLTAGE_IN] = direct;
+	info->format[PSC_VOLTAGE_OUT] = direct;
+	info->format[PSC_CURRENT_OUT] = direct;
 	info->m[PSC_CURRENT_OUT] = 807;
 	info->b[PSC_CURRENT_OUT] = 20475;
 	info->R[PSC_CURRENT_OUT] = -1;
 	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 
+	info->read_word_data = adm1275_read_word_data;
+	info->write_word_data = adm1275_write_word_data;
+
 	if (config & ADM1275_VRANGE) {
 		info->m[PSC_VOLTAGE_IN] = 19199;
 		info->b[PSC_VOLTAGE_IN] = 0;
diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
new file mode 100644
index 000000000000..d4bc114572de
--- /dev/null
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -0,0 +1,340 @@
+/*
+ * Hardware monitoring driver for LM25066 / LM5064 / LM5066
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { lm25066, lm5064, lm5066 };
+
+#define LM25066_READ_VAUX		0xd0
+#define LM25066_MFR_READ_IIN		0xd1
+#define LM25066_MFR_READ_PIN		0xd2
+#define LM25066_MFR_IIN_OC_WARN_LIMIT	0xd3
+#define LM25066_MFR_PIN_OP_WARN_LIMIT	0xd4
+#define LM25066_READ_PIN_PEAK		0xd5
+#define LM25066_CLEAR_PIN_PEAK		0xd6
+#define LM25066_DEVICE_SETUP		0xd9
+#define LM25066_READ_AVG_VIN		0xdc
+#define LM25066_READ_AVG_VOUT		0xdd
+#define LM25066_READ_AVG_IIN		0xde
+#define LM25066_READ_AVG_PIN		0xdf
+
+#define LM25066_DEV_SETUP_CL		(1 << 4)	/* Current limit */
+
+struct lm25066_data {
+	int id;
+	struct pmbus_driver_info info;
+};
+
+#define to_lm25066_data(x)  container_of(x, struct lm25066_data, info)
+
+static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct lm25066_data *data = to_lm25066_data(info);
+	int ret;
+
+	if (page > 1)
+		return -EINVAL;
+
+	/* Map READ_VAUX into READ_VOUT register on page 1 */
+	if (page == 1) {
+		switch (reg) {
+		case PMBUS_READ_VOUT:
+			ret = pmbus_read_word_data(client, 0,
+						   LM25066_READ_VAUX);
+			if (ret < 0)
+				break;
+			/* Adjust returned value to match VOUT coefficients */
+			switch (data->id) {
+			case lm25066:
+				/* VOUT: 4.54 mV VAUX: 283.2 uV LSB */
+				ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
+				break;
+			case lm5064:
+				/* VOUT: 4.53 mV VAUX: 700 uV LSB */
+				ret = DIV_ROUND_CLOSEST(ret * 70, 453);
+				break;
+			case lm5066:
+				/* VOUT: 2.18 mV VAUX: 725 uV LSB */
+				ret = DIV_ROUND_CLOSEST(ret * 725, 2180);
+				break;
+			}
+			break;
+		default:
+			/* No other valid registers on page 1 */
+			ret = -EINVAL;
+			break;
+		}
+		goto done;
+	}
+
+	switch (reg) {
+	case PMBUS_READ_IIN:
+		ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_IIN);
+		break;
+	case PMBUS_READ_PIN:
+		ret = pmbus_read_word_data(client, 0, LM25066_MFR_READ_PIN);
+		break;
+	case PMBUS_IIN_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0,
+					   LM25066_MFR_IIN_OC_WARN_LIMIT);
+		break;
+	case PMBUS_PIN_OP_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0,
+					   LM25066_MFR_PIN_OP_WARN_LIMIT);
+		break;
+	case PMBUS_VIRT_READ_VIN_AVG:
+		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VIN);
+		break;
+	case PMBUS_VIRT_READ_VOUT_AVG:
+		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_VOUT);
+		break;
+	case PMBUS_VIRT_READ_IIN_AVG:
+		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_IIN);
+		break;
+	case PMBUS_VIRT_READ_PIN_AVG:
+		ret = pmbus_read_word_data(client, 0, LM25066_READ_AVG_PIN);
+		break;
+	case PMBUS_VIRT_READ_PIN_MAX:
+		ret = pmbus_read_word_data(client, 0, LM25066_READ_PIN_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+done:
+	return ret;
+}
+
+static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
+				   u16 word)
+{
+	int ret;
+
+	if (page > 1)
+		return -EINVAL;
+
+	switch (reg) {
+	case PMBUS_IIN_OC_WARN_LIMIT:
+		ret = pmbus_write_word_data(client, 0,
+					    LM25066_MFR_IIN_OC_WARN_LIMIT,
+					    word);
+		break;
+	case PMBUS_PIN_OP_WARN_LIMIT:
+		ret = pmbus_write_word_data(client, 0,
+					    LM25066_MFR_PIN_OP_WARN_LIMIT,
+					    word);
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int lm25066_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	int config;
+	int ret;
+	struct lm25066_data *data;
+	struct pmbus_driver_info *info;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct lm25066_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP);
+	if (config < 0) {
+		ret = config;
+		goto err_mem;
+	}
+
+	data->id = id->driver_data;
+	info = &data->info;
+
+	info->pages = 2;
+	info->format[PSC_VOLTAGE_IN] = direct;
+	info->format[PSC_VOLTAGE_OUT] = direct;
+	info->format[PSC_CURRENT_IN] = direct;
+	info->format[PSC_TEMPERATURE] = direct;
+	info->format[PSC_POWER] = direct;
+
+	info->m[PSC_TEMPERATURE] = 16;
+	info->b[PSC_TEMPERATURE] = 0;
+	info->R[PSC_TEMPERATURE] = 0;
+
+	info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
+	  | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN
+	  | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+	info->func[1] = PMBUS_HAVE_VOUT;
+
+	info->read_word_data = lm25066_read_word_data;
+	info->write_word_data = lm25066_write_word_data;
+
+	switch (id->driver_data) {
+	case lm25066:
+		info->m[PSC_VOLTAGE_IN] = 22070;
+		info->b[PSC_VOLTAGE_IN] = 0;
+		info->R[PSC_VOLTAGE_IN] = -2;
+		info->m[PSC_VOLTAGE_OUT] = 22070;
+		info->b[PSC_VOLTAGE_OUT] = 0;
+		info->R[PSC_VOLTAGE_OUT] = -2;
+
+		if (config & LM25066_DEV_SETUP_CL) {
+			info->m[PSC_CURRENT_IN] = 6852;
+			info->b[PSC_CURRENT_IN] = 0;
+			info->R[PSC_CURRENT_IN] = -2;
+			info->m[PSC_POWER] = 369;
+			info->b[PSC_POWER] = 0;
+			info->R[PSC_POWER] = -2;
+		} else {
+			info->m[PSC_CURRENT_IN] = 13661;
+			info->b[PSC_CURRENT_IN] = 0;
+			info->R[PSC_CURRENT_IN] = -2;
+			info->m[PSC_POWER] = 736;
+			info->b[PSC_POWER] = 0;
+			info->R[PSC_POWER] = -2;
+		}
+		break;
+	case lm5064:
+		info->m[PSC_VOLTAGE_IN] = 22075;
+		info->b[PSC_VOLTAGE_IN] = 0;
+		info->R[PSC_VOLTAGE_IN] = -2;
+		info->m[PSC_VOLTAGE_OUT] = 22075;
+		info->b[PSC_VOLTAGE_OUT] = 0;
+		info->R[PSC_VOLTAGE_OUT] = -2;
+
+		if (config & LM25066_DEV_SETUP_CL) {
+			info->m[PSC_CURRENT_IN] = 6713;
+			info->b[PSC_CURRENT_IN] = 0;
+			info->R[PSC_CURRENT_IN] = -2;
+			info->m[PSC_POWER] = 3619;
+			info->b[PSC_POWER] = 0;
+			info->R[PSC_POWER] = -3;
+		} else {
+			info->m[PSC_CURRENT_IN] = 13426;
+			info->b[PSC_CURRENT_IN] = 0;
+			info->R[PSC_CURRENT_IN] = -2;
+			info->m[PSC_POWER] = 7238;
+			info->b[PSC_POWER] = 0;
+			info->R[PSC_POWER] = -3;
+		}
+		break;
+	case lm5066:
+		info->m[PSC_VOLTAGE_IN] = 4587;
+		info->b[PSC_VOLTAGE_IN] = 0;
+		info->R[PSC_VOLTAGE_IN] = -2;
+		info->m[PSC_VOLTAGE_OUT] = 4587;
+		info->b[PSC_VOLTAGE_OUT] = 0;
+		info->R[PSC_VOLTAGE_OUT] = -2;
+
+		if (config & LM25066_DEV_SETUP_CL) {
+			info->m[PSC_CURRENT_IN] = 10753;
+			info->b[PSC_CURRENT_IN] = 0;
+			info->R[PSC_CURRENT_IN] = -2;
+			info->m[PSC_POWER] = 1204;
+			info->b[PSC_POWER] = 0;
+			info->R[PSC_POWER] = -3;
+		} else {
+			info->m[PSC_CURRENT_IN] = 5405;
+			info->b[PSC_CURRENT_IN] = 0;
+			info->R[PSC_CURRENT_IN] = -2;
+			info->m[PSC_POWER] = 605;
+			info->b[PSC_POWER] = 0;
+			info->R[PSC_POWER] = -3;
+		}
+		break;
+	default:
+		ret = -ENODEV;
+		goto err_mem;
+	}
+
+	ret = pmbus_do_probe(client, id, info);
+	if (ret)
+		goto err_mem;
+	return 0;
+
+err_mem:
+	kfree(data);
+	return ret;
+}
+
+static int lm25066_remove(struct i2c_client *client)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct lm25066_data *data = to_lm25066_data(info);
+	int ret;
+
+	ret = pmbus_do_remove(client);
+	kfree(data);
+	return ret;
+}
+
+static const struct i2c_device_id lm25066_id[] = {
+	{"lm25066", lm25066},
+	{"lm5064", lm5064},
+	{"lm5066", lm5066},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, lm25066_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver lm25066_driver = {
+	.driver = {
+		   .name = "lm25066",
+		   },
+	.probe = lm25066_probe,
+	.remove = lm25066_remove,
+	.id_table = lm25066_id,
+};
+
+static int __init lm25066_init(void)
+{
+	return i2c_add_driver(&lm25066_driver);
+}
+
+static void __exit lm25066_exit(void)
+{
+	i2c_del_driver(&lm25066_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LM25066/LM5064/LM5066");
+MODULE_LICENSE("GPL");
+module_init(lm25066_init);
+module_exit(lm25066_exit);
diff --git a/drivers/hwmon/max16064.c b/drivers/hwmon/pmbus/max16064.c
index 1d6d717060d3..e50b296e8db4 100644
--- a/drivers/hwmon/max16064.c
+++ b/drivers/hwmon/pmbus/max16064.c
@@ -25,11 +25,60 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
+#define MAX16064_MFR_VOUT_PEAK		0xd4
+#define MAX16064_MFR_TEMPERATURE_PEAK	0xd6
+
+static int max16064_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page,
+					   MAX16064_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page,
+					   MAX16064_MFR_TEMPERATURE_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max16064_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX16064_MFR_VOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX16064_MFR_TEMPERATURE_PEAK,
+					    0xffff);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
 static struct pmbus_driver_info max16064_info = {
 	.pages = 4,
-	.direct[PSC_VOLTAGE_IN] = true,
-	.direct[PSC_VOLTAGE_OUT] = true,
-	.direct[PSC_TEMPERATURE] = true,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
 	.m[PSC_VOLTAGE_IN] = 19995,
 	.b[PSC_VOLTAGE_IN] = 0,
 	.R[PSC_VOLTAGE_IN] = -1,
@@ -44,6 +93,8 @@ static struct pmbus_driver_info max16064_info = {
 	.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
 	.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
 	.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+	.read_word_data = max16064_read_word_data,
+	.write_word_data = max16064_write_word_data,
 };
 
 static int max16064_probe(struct i2c_client *client,
diff --git a/drivers/hwmon/max34440.c b/drivers/hwmon/pmbus/max34440.c
index db11e1a175b2..fda621d2e458 100644
--- a/drivers/hwmon/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -27,11 +27,70 @@
 
 enum chips { max34440, max34441 };
 
+#define MAX34440_MFR_VOUT_PEAK		0xd4
+#define MAX34440_MFR_IOUT_PEAK		0xd5
+#define MAX34440_MFR_TEMPERATURE_PEAK	0xd6
+
 #define MAX34440_STATUS_OC_WARN		(1 << 0)
 #define MAX34440_STATUS_OC_FAULT	(1 << 1)
 #define MAX34440_STATUS_OT_FAULT	(1 << 5)
 #define MAX34440_STATUS_OT_WARN		(1 << 6)
 
+static int max34440_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page,
+					   MAX34440_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page,
+					   MAX34440_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page,
+					   MAX34440_MFR_TEMPERATURE_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max34440_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_VOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_IOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_TEMPERATURE_PEAK,
+					    0xffff);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
 static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
 {
 	int ret;
@@ -72,10 +131,10 @@ static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
 static struct pmbus_driver_info max34440_info[] = {
 	[max34440] = {
 		.pages = 14,
-		.direct[PSC_VOLTAGE_IN] = true,
-		.direct[PSC_VOLTAGE_OUT] = true,
-		.direct[PSC_TEMPERATURE] = true,
-		.direct[PSC_CURRENT_OUT] = true,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
 		.m[PSC_VOLTAGE_IN] = 1,
 		.b[PSC_VOLTAGE_IN] = 0,
 		.R[PSC_VOLTAGE_IN] = 3,	    /* R = 0 in datasheet reflects mV */
@@ -109,14 +168,16 @@ static struct pmbus_driver_info max34440_info[] = {
 		.func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
 		.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
 		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
 	},
 	[max34441] = {
 		.pages = 12,
-		.direct[PSC_VOLTAGE_IN] = true,
-		.direct[PSC_VOLTAGE_OUT] = true,
-		.direct[PSC_TEMPERATURE] = true,
-		.direct[PSC_CURRENT_OUT] = true,
-		.direct[PSC_FAN] = true,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.format[PSC_FAN] = direct,
 		.m[PSC_VOLTAGE_IN] = 1,
 		.b[PSC_VOLTAGE_IN] = 0,
 		.R[PSC_VOLTAGE_IN] = 3,
@@ -150,6 +211,8 @@ static struct pmbus_driver_info max34440_info[] = {
 		.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
 		.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
 		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
 	},
 };
 
diff --git a/drivers/hwmon/max8688.c b/drivers/hwmon/pmbus/max8688.c
index 7fb93f4e9f21..c3e72f1a3cfb 100644
--- a/drivers/hwmon/max8688.c
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -25,6 +25,9 @@
 #include <linux/i2c.h>
 #include "pmbus.h"
 
+#define MAX8688_MFR_VOUT_PEAK		0xd4
+#define MAX8688_MFR_IOUT_PEAK		0xd5
+#define MAX8688_MFR_TEMPERATURE_PEAK	0xd6
 #define MAX8688_MFG_STATUS		0xd8
 
 #define MAX8688_STATUS_OC_FAULT		(1 << 4)
@@ -37,6 +40,62 @@
 #define MAX8688_STATUS_OT_FAULT		(1 << 13)
 #define MAX8688_STATUS_OT_WARNING	(1 << 14)
 
+static int max8688_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	if (page)
+		return -EINVAL;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, MAX8688_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, MAX8688_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, 0,
+					   MAX8688_MFR_TEMPERATURE_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max8688_write_word_data(struct i2c_client *client, int page, int reg,
+				   u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, MAX8688_MFR_VOUT_PEAK,
+					    0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, MAX8688_MFR_IOUT_PEAK,
+					    0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, 0,
+					    MAX8688_MFR_TEMPERATURE_PEAK,
+					    0xffff);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
 static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
 {
 	int ret = 0;
@@ -91,10 +150,10 @@ static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
 
 static struct pmbus_driver_info max8688_info = {
 	.pages = 1,
-	.direct[PSC_VOLTAGE_IN] = true,
-	.direct[PSC_VOLTAGE_OUT] = true,
-	.direct[PSC_TEMPERATURE] = true,
-	.direct[PSC_CURRENT_OUT] = true,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
 	.m[PSC_VOLTAGE_IN] = 19995,
 	.b[PSC_VOLTAGE_IN] = 0,
 	.R[PSC_VOLTAGE_IN] = -1,
@@ -111,6 +170,8 @@ static struct pmbus_driver_info max8688_info = {
 		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
 		| PMBUS_HAVE_STATUS_TEMP,
 	.read_byte_data = max8688_read_byte_data,
+	.read_word_data = max8688_read_word_data,
+	.write_word_data = max8688_write_word_data,
 };
 
 static int max8688_probe(struct i2c_client *client,
diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
index 9b1f0c37ef77..73de9f1f3194 100644
--- a/drivers/hwmon/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -96,6 +96,8 @@ static void pmbus_find_sensor_groups(struct i2c_client *client,
 static int pmbus_identify(struct i2c_client *client,
 			  struct pmbus_driver_info *info)
 {
+	int ret = 0;
+
 	if (!info->pages) {
 		/*
 		 * Check if the PAGE command is supported. If it is,
@@ -117,6 +119,27 @@ static int pmbus_identify(struct i2c_client *client,
 		}
 	}
 
+	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
+		int vout_mode;
+
+		vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+		if (vout_mode >= 0 && vout_mode != 0xff) {
+			switch (vout_mode >> 5) {
+			case 0:
+				break;
+			case 1:
+				info->format[PSC_VOLTAGE_OUT] = vid;
+				break;
+			case 2:
+				info->format[PSC_VOLTAGE_OUT] = direct;
+				break;
+			default:
+				ret = -ENODEV;
+				goto abort;
+			}
+		}
+	}
+
 	/*
 	 * We should check if the COEFFICIENTS register is supported.
 	 * If it is, and the chip is configured for direct mode, we can read
@@ -125,13 +148,18 @@ static int pmbus_identify(struct i2c_client *client,
 	 *
 	 * To do this, we will need access to a chip which actually supports the
 	 * COEFFICIENTS command, since the command is too complex to implement
-	 * without testing it.
+	 * without testing it. Until then, abort if a chip configured for direct
+	 * mode was detected.
 	 */
+	if (info->format[PSC_VOLTAGE_OUT] == direct) {
+		ret = -ENODEV;
+		goto abort;
+	}
 
 	/* Try to find sensor groups  */
 	pmbus_find_sensor_groups(client, info);
-
-	return 0;
+abort:
+	return ret;
 }
 
 static int pmbus_probe(struct i2c_client *client,
@@ -172,11 +200,14 @@ static int pmbus_remove(struct i2c_client *client)
  * Use driver_data to set the number of pages supported by the chip.
  */
 static const struct i2c_device_id pmbus_id[] = {
+	{"adp4000", 1},
 	{"bmr450", 1},
 	{"bmr451", 1},
 	{"bmr453", 1},
 	{"bmr454", 1},
 	{"ltc2978", 8},
+	{"ncp4200", 1},
+	{"ncp4208", 1},
 	{"pmbus", 0},
 	{}
 };
diff --git a/drivers/hwmon/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index 50647ab7235a..0808d986d75b 100644
--- a/drivers/hwmon/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -126,6 +126,42 @@
 #define PMBUS_MFR_SERIAL		0x9E
 
 /*
+ * Virtual registers.
+ * Useful to support attributes which are not supported by standard PMBus
+ * registers but exist as manufacturer specific registers on individual chips.
+ * Must be mapped to real registers in device specific code.
+ *
+ * Semantics:
+ * Virtual registers are all word size.
+ * READ registers are read-only; writes are either ignored or return an error.
+ * RESET registers are read/write. Reading returns zero (used for detection),
+ * writing any value causes the associated history to be reset.
+ */
+#define PMBUS_VIRT_BASE			0x100
+#define PMBUS_VIRT_READ_TEMP_MIN	(PMBUS_VIRT_BASE + 0)
+#define PMBUS_VIRT_READ_TEMP_MAX	(PMBUS_VIRT_BASE + 1)
+#define PMBUS_VIRT_RESET_TEMP_HISTORY	(PMBUS_VIRT_BASE + 2)
+#define PMBUS_VIRT_READ_VIN_AVG		(PMBUS_VIRT_BASE + 3)
+#define PMBUS_VIRT_READ_VIN_MIN		(PMBUS_VIRT_BASE + 4)
+#define PMBUS_VIRT_READ_VIN_MAX		(PMBUS_VIRT_BASE + 5)
+#define PMBUS_VIRT_RESET_VIN_HISTORY	(PMBUS_VIRT_BASE + 6)
+#define PMBUS_VIRT_READ_IIN_AVG		(PMBUS_VIRT_BASE + 7)
+#define PMBUS_VIRT_READ_IIN_MIN		(PMBUS_VIRT_BASE + 8)
+#define PMBUS_VIRT_READ_IIN_MAX		(PMBUS_VIRT_BASE + 9)
+#define PMBUS_VIRT_RESET_IIN_HISTORY	(PMBUS_VIRT_BASE + 10)
+#define PMBUS_VIRT_READ_PIN_AVG		(PMBUS_VIRT_BASE + 11)
+#define PMBUS_VIRT_READ_PIN_MAX		(PMBUS_VIRT_BASE + 12)
+#define PMBUS_VIRT_RESET_PIN_HISTORY	(PMBUS_VIRT_BASE + 13)
+#define PMBUS_VIRT_READ_VOUT_AVG	(PMBUS_VIRT_BASE + 14)
+#define PMBUS_VIRT_READ_VOUT_MIN	(PMBUS_VIRT_BASE + 15)
+#define PMBUS_VIRT_READ_VOUT_MAX	(PMBUS_VIRT_BASE + 16)
+#define PMBUS_VIRT_RESET_VOUT_HISTORY	(PMBUS_VIRT_BASE + 17)
+#define PMBUS_VIRT_READ_IOUT_AVG	(PMBUS_VIRT_BASE + 18)
+#define PMBUS_VIRT_READ_IOUT_MIN	(PMBUS_VIRT_BASE + 19)
+#define PMBUS_VIRT_READ_IOUT_MAX	(PMBUS_VIRT_BASE + 20)
+#define PMBUS_VIRT_RESET_IOUT_HISTORY	(PMBUS_VIRT_BASE + 21)
+
+/*
  * CAPABILITY
  */
 #define PB_CAPABILITY_SMBALERT		(1<<4)
@@ -266,11 +302,11 @@ enum pmbus_sensor_classes {
 #define PMBUS_HAVE_STATUS_FAN12	(1 << 16)
 #define PMBUS_HAVE_STATUS_FAN34	(1 << 17)
 
+enum pmbus_data_format { linear = 0, direct, vid };
+
 struct pmbus_driver_info {
 	int pages;		/* Total number of pages */
-	bool direct[PSC_NUM_CLASSES];
-				/* true if device uses direct data format
-				   for the given sensor class */
+	enum pmbus_data_format format[PSC_NUM_CLASSES];
 	/*
 	 * Support one set of coefficients for each sensor type
 	 * Used for chips providing data in direct mode.
@@ -286,6 +322,9 @@ struct pmbus_driver_info {
 	 * necessary.
 	 */
 	int (*read_byte_data)(struct i2c_client *client, int page, int reg);
+	int (*read_word_data)(struct i2c_client *client, int page, int reg);
+	int (*write_word_data)(struct i2c_client *client, int page, int reg,
+			       u16 word);
 	/*
 	 * The identify function determines supported PMBus functionality.
 	 * This function is only necessary if a chip driver supports multiple
@@ -299,6 +338,9 @@ struct pmbus_driver_info {
 
 int pmbus_set_page(struct i2c_client *client, u8 page);
 int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
+int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
+int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
+int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
 void pmbus_clear_faults(struct i2c_client *client);
 bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
 bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 8e31a8e2c746..5c1b6cf31701 100644
--- a/drivers/hwmon/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -33,14 +33,18 @@
 /*
  * Constants needed to determine number of sensors, booleans, and labels.
  */
-#define PMBUS_MAX_INPUT_SENSORS		11	/* 6*volt, 3*curr, 2*power */
-#define PMBUS_VOUT_SENSORS_PER_PAGE	5	/* input, min, max, lcrit,
-						   crit */
-#define PMBUS_IOUT_SENSORS_PER_PAGE	4	/* input, min, max, crit */
+#define PMBUS_MAX_INPUT_SENSORS		22	/* 10*volt, 7*curr, 5*power */
+#define PMBUS_VOUT_SENSORS_PER_PAGE	9	/* input, min, max, lcrit,
+						   crit, lowest, highest, avg,
+						   reset */
+#define PMBUS_IOUT_SENSORS_PER_PAGE	8	/* input, min, max, crit,
+						   lowest, highest, avg,
+						   reset */
 #define PMBUS_POUT_SENSORS_PER_PAGE	4	/* input, cap, max, crit */
 #define PMBUS_MAX_SENSORS_PER_FAN	1	/* input */
-#define PMBUS_MAX_SENSORS_PER_TEMP	5	/* input, min, max, lcrit,
-						   crit */
+#define PMBUS_MAX_SENSORS_PER_TEMP	8	/* input, min, max, lcrit,
+						   crit, lowest, highest,
+						   reset */
 
 #define PMBUS_MAX_INPUT_BOOLEANS	7	/* v: min_alarm, max_alarm,
 						   lcrit_alarm, crit_alarm;
@@ -74,11 +78,13 @@
 #define PB_STATUS_INPUT_BASE	(PB_STATUS_FAN34_BASE + PMBUS_PAGES)
 #define PB_STATUS_TEMP_BASE	(PB_STATUS_INPUT_BASE + 1)
 
+#define PMBUS_NAME_SIZE		24
+
 struct pmbus_sensor {
-	char name[I2C_NAME_SIZE];	/* sysfs sensor name */
+	char name[PMBUS_NAME_SIZE];	/* sysfs sensor name */
 	struct sensor_device_attribute attribute;
 	u8 page;		/* page number */
-	u8 reg;			/* register */
+	u16 reg;		/* register */
 	enum pmbus_sensor_classes class;	/* sensor class */
 	bool update;		/* runtime sensor update needed */
 	int data;		/* Sensor data.
@@ -86,14 +92,14 @@ struct pmbus_sensor {
 };
 
 struct pmbus_boolean {
-	char name[I2C_NAME_SIZE];	/* sysfs boolean name */
+	char name[PMBUS_NAME_SIZE];	/* sysfs boolean name */
 	struct sensor_device_attribute attribute;
 };
 
 struct pmbus_label {
-	char name[I2C_NAME_SIZE];	/* sysfs label name */
+	char name[PMBUS_NAME_SIZE];	/* sysfs label name */
 	struct sensor_device_attribute attribute;
-	char label[I2C_NAME_SIZE];	/* label */
+	char label[PMBUS_NAME_SIZE];	/* label */
 };
 
 struct pmbus_data {
@@ -162,19 +168,21 @@ int pmbus_set_page(struct i2c_client *client, u8 page)
 }
 EXPORT_SYMBOL_GPL(pmbus_set_page);
 
-static int pmbus_write_byte(struct i2c_client *client, u8 page, u8 value)
+int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
 {
 	int rv;
 
-	rv = pmbus_set_page(client, page);
-	if (rv < 0)
-		return rv;
+	if (page >= 0) {
+		rv = pmbus_set_page(client, page);
+		if (rv < 0)
+			return rv;
+	}
 
 	return i2c_smbus_write_byte(client, value);
 }
+EXPORT_SYMBOL_GPL(pmbus_write_byte);
 
-static int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg,
-				 u16 word)
+int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word)
 {
 	int rv;
 
@@ -184,6 +192,28 @@ static int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg,
 
 	return i2c_smbus_write_word_data(client, reg, word);
 }
+EXPORT_SYMBOL_GPL(pmbus_write_word_data);
+
+/*
+ * _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
+				  u16 word)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->write_word_data) {
+		status = info->write_word_data(client, page, reg, word);
+		if (status != -ENODATA)
+			return status;
+	}
+	if (reg >= PMBUS_VIRT_BASE)
+		return -EINVAL;
+	return pmbus_write_word_data(client, page, reg, word);
+}
 
 int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
 {
@@ -197,16 +227,57 @@ int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
 }
 EXPORT_SYMBOL_GPL(pmbus_read_word_data);
 
-static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg)
+/*
+ * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->read_word_data) {
+		status = info->read_word_data(client, page, reg);
+		if (status != -ENODATA)
+			return status;
+	}
+	if (reg >= PMBUS_VIRT_BASE)
+		return -EINVAL;
+	return pmbus_read_word_data(client, page, reg);
+}
+
+int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
 {
 	int rv;
 
-	rv = pmbus_set_page(client, page);
-	if (rv < 0)
-		return rv;
+	if (page >= 0) {
+		rv = pmbus_set_page(client, page);
+		if (rv < 0)
+			return rv;
+	}
 
 	return i2c_smbus_read_byte_data(client, reg);
 }
+EXPORT_SYMBOL_GPL(pmbus_read_byte_data);
+
+/*
+ * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->read_byte_data) {
+		status = info->read_byte_data(client, page, reg);
+		if (status != -ENODATA)
+			return status;
+	}
+	return pmbus_read_byte_data(client, page, reg);
+}
 
 static void pmbus_clear_fault_page(struct i2c_client *client, int page)
 {
@@ -223,13 +294,13 @@ void pmbus_clear_faults(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(pmbus_clear_faults);
 
-static int pmbus_check_status_cml(struct i2c_client *client, int page)
+static int pmbus_check_status_cml(struct i2c_client *client)
 {
 	int status, status2;
 
-	status = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
+	status = pmbus_read_byte_data(client, -1, PMBUS_STATUS_BYTE);
 	if (status < 0 || (status & PB_STATUS_CML)) {
-		status2 = pmbus_read_byte_data(client, page, PMBUS_STATUS_CML);
+		status2 = pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
 		if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
 			return -EINVAL;
 	}
@@ -241,10 +312,10 @@ bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
 	int rv;
 	struct pmbus_data *data = i2c_get_clientdata(client);
 
-	rv = pmbus_read_byte_data(client, page, reg);
+	rv = _pmbus_read_byte_data(client, page, reg);
 	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
-		rv = pmbus_check_status_cml(client, page);
-	pmbus_clear_fault_page(client, page);
+		rv = pmbus_check_status_cml(client);
+	pmbus_clear_fault_page(client, -1);
 	return rv >= 0;
 }
 EXPORT_SYMBOL_GPL(pmbus_check_byte_register);
@@ -254,10 +325,10 @@ bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
 	int rv;
 	struct pmbus_data *data = i2c_get_clientdata(client);
 
-	rv = pmbus_read_word_data(client, page, reg);
+	rv = _pmbus_read_word_data(client, page, reg);
 	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
-		rv = pmbus_check_status_cml(client, page);
-	pmbus_clear_fault_page(client, page);
+		rv = pmbus_check_status_cml(client);
+	pmbus_clear_fault_page(client, -1);
 	return rv >= 0;
 }
 EXPORT_SYMBOL_GPL(pmbus_check_word_register);
@@ -270,24 +341,6 @@ const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(pmbus_get_driver_info);
 
-/*
- * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
- * a device specific mapping funcion exists and calls it if necessary.
- */
-static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg)
-{
-	struct pmbus_data *data = i2c_get_clientdata(client);
-	const struct pmbus_driver_info *info = data->info;
-	int status;
-
-	if (info->read_byte_data) {
-		status = info->read_byte_data(client, page, reg);
-		if (status != -ENODATA)
-			return status;
-	}
-	return pmbus_read_byte_data(client, page, reg);
-}
-
 static struct pmbus_data *pmbus_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -347,8 +400,9 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
 
 			if (!data->valid || sensor->update)
 				sensor->data
-				    = pmbus_read_word_data(client, sensor->page,
-							   sensor->reg);
+				    = _pmbus_read_word_data(client,
+							    sensor->page,
+							    sensor->reg);
 		}
 		pmbus_clear_faults(client);
 		data->last_updated = jiffies;
@@ -443,15 +497,37 @@ static long pmbus_reg2data_direct(struct pmbus_data *data,
 	return (val - b) / m;
 }
 
+/*
+ * Convert VID sensor values to milli- or micro-units
+ * depending on sensor type.
+ * We currently only support VR11.
+ */
+static long pmbus_reg2data_vid(struct pmbus_data *data,
+			       struct pmbus_sensor *sensor)
+{
+	long val = sensor->data;
+
+	if (val < 0x02 || val > 0xb2)
+		return 0;
+	return DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
+}
+
 static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
 {
 	long val;
 
-	if (data->info->direct[sensor->class])
+	switch (data->info->format[sensor->class]) {
+	case direct:
 		val = pmbus_reg2data_direct(data, sensor);
-	else
+		break;
+	case vid:
+		val = pmbus_reg2data_vid(data, sensor);
+		break;
+	case linear:
+	default:
 		val = pmbus_reg2data_linear(data, sensor);
-
+		break;
+	}
 	return val;
 }
 
@@ -561,16 +637,31 @@ static u16 pmbus_data2reg_direct(struct pmbus_data *data,
 	return val;
 }
 
+static u16 pmbus_data2reg_vid(struct pmbus_data *data,
+			      enum pmbus_sensor_classes class, long val)
+{
+	val = SENSORS_LIMIT(val, 500, 1600);
+
+	return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625);
+}
+
 static u16 pmbus_data2reg(struct pmbus_data *data,
 			  enum pmbus_sensor_classes class, long val)
 {
 	u16 regval;
 
-	if (data->info->direct[class])
+	switch (data->info->format[class]) {
+	case direct:
 		regval = pmbus_data2reg_direct(data, class, val);
-	else
+		break;
+	case vid:
+		regval = pmbus_data2reg_vid(data, class, val);
+		break;
+	case linear:
+	default:
 		regval = pmbus_data2reg_linear(data, class, val);
-
+		break;
+	}
 	return regval;
 }
 
@@ -682,7 +773,7 @@ static ssize_t pmbus_set_sensor(struct device *dev,
 
 	mutex_lock(&data->update_lock);
 	regval = pmbus_data2reg(data, sensor->class, val);
-	ret = pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
+	ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
 	if (ret < 0)
 		rv = ret;
 	else
@@ -867,7 +958,8 @@ static void pmbus_find_max_attr(struct i2c_client *client,
  * and its associated alarm attribute.
  */
 struct pmbus_limit_attr {
-	u8 reg;			/* Limit register */
+	u16 reg;		/* Limit register */
+	bool update;		/* True if register needs updates */
 	const char *attr;	/* Attribute name */
 	const char *alarm;	/* Alarm attribute name */
 	u32 sbit;		/* Alarm attribute status bit */
@@ -912,9 +1004,10 @@ static bool pmbus_add_limit_attrs(struct i2c_client *client,
 		if (pmbus_check_word_register(client, page, l->reg)) {
 			cindex = data->num_sensors;
 			pmbus_add_sensor(data, name, l->attr, index, page,
-					 l->reg, attr->class, attr->update,
+					 l->reg, attr->class,
+					 attr->update || l->update,
 					 false);
-			if (info->func[page] & attr->sfunc) {
+			if (l->sbit && (info->func[page] & attr->sfunc)) {
 				if (attr->compare) {
 					pmbus_add_boolean_cmp(data, name,
 						l->alarm, index,
@@ -953,9 +1046,11 @@ static void pmbus_add_sensor_attrs_one(struct i2c_client *client,
 						   index, page, cbase, attr);
 		/*
 		 * Add generic alarm attribute only if there are no individual
-		 * alarm attributes, and if there is a global alarm bit.
+		 * alarm attributes, if there is a global alarm bit, and if
+		 * the generic status register for this page is accessible.
 		 */
-		if (!have_alarm && attr->gbit)
+		if (!have_alarm && attr->gbit &&
+		    pmbus_check_byte_register(client, page, PMBUS_STATUS_BYTE))
 			pmbus_add_boolean_reg(data, name, "alarm", index,
 					      PB_STATUS_BASE + page,
 					      attr->gbit);
@@ -1008,6 +1103,21 @@ static const struct pmbus_limit_attr vin_limit_attrs[] = {
 		.attr = "crit",
 		.alarm = "crit_alarm",
 		.sbit = PB_VOLTAGE_OV_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_VIN_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_VIN_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_VIN_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_VIN_HISTORY,
+		.attr = "reset_history",
 	},
 };
 
@@ -1032,6 +1142,21 @@ static const struct pmbus_limit_attr vout_limit_attrs[] = {
 		.attr = "crit",
 		.alarm = "crit_alarm",
 		.sbit = PB_VOLTAGE_OV_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_VOUT_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_VOUT_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_VOUT_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_VOUT_HISTORY,
+		.attr = "reset_history",
 	}
 };
 
@@ -1078,6 +1203,21 @@ static const struct pmbus_limit_attr iin_limit_attrs[] = {
 		.attr = "crit",
 		.alarm = "crit_alarm",
 		.sbit = PB_IIN_OC_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_IIN_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_IIN_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_IIN_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_IIN_HISTORY,
+		.attr = "reset_history",
 	}
 };
 
@@ -1097,6 +1237,21 @@ static const struct pmbus_limit_attr iout_limit_attrs[] = {
 		.attr = "crit",
 		.alarm = "crit_alarm",
 		.sbit = PB_IOUT_OC_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_IOUT_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_IOUT_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_IOUT_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_IOUT_HISTORY,
+		.attr = "reset_history",
 	}
 };
 
@@ -1132,6 +1287,17 @@ static const struct pmbus_limit_attr pin_limit_attrs[] = {
 		.attr = "max",
 		.alarm = "alarm",
 		.sbit = PB_PIN_OP_WARNING,
+	}, {
+		.reg = PMBUS_VIRT_READ_PIN_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_PIN_MAX,
+		.update = true,
+		.attr = "input_highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_PIN_HISTORY,
+		.attr = "reset_history",
 	}
 };
 
@@ -1200,6 +1366,39 @@ static const struct pmbus_limit_attr temp_limit_attrs[] = {
 		.attr = "crit",
 		.alarm = "crit_alarm",
 		.sbit = PB_TEMP_OT_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP_MIN,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP_MAX,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_TEMP_HISTORY,
+		.attr = "reset_history",
+	}
+};
+
+static const struct pmbus_limit_attr temp_limit_attrs23[] = {
+	{
+		.reg = PMBUS_UT_WARN_LIMIT,
+		.attr = "min",
+		.alarm = "min_alarm",
+		.sbit = PB_TEMP_UT_WARNING,
+	}, {
+		.reg = PMBUS_UT_FAULT_LIMIT,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_TEMP_UT_FAULT,
+	}, {
+		.reg = PMBUS_OT_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_TEMP_OT_WARNING,
+	}, {
+		.reg = PMBUS_OT_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_TEMP_OT_FAULT,
 	}
 };
 
@@ -1226,8 +1425,8 @@ static const struct pmbus_sensor_attr temp_attributes[] = {
 		.sfunc = PMBUS_HAVE_STATUS_TEMP,
 		.sbase = PB_STATUS_TEMP_BASE,
 		.gbit = PB_STATUS_TEMPERATURE,
-		.limit = temp_limit_attrs,
-		.nlimit = ARRAY_SIZE(temp_limit_attrs),
+		.limit = temp_limit_attrs23,
+		.nlimit = ARRAY_SIZE(temp_limit_attrs23),
 	}, {
 		.reg = PMBUS_READ_TEMPERATURE_3,
 		.class = PSC_TEMPERATURE,
@@ -1238,8 +1437,8 @@ static const struct pmbus_sensor_attr temp_attributes[] = {
 		.sfunc = PMBUS_HAVE_STATUS_TEMP,
 		.sbase = PB_STATUS_TEMP_BASE,
 		.gbit = PB_STATUS_TEMPERATURE,
-		.limit = temp_limit_attrs,
-		.nlimit = ARRAY_SIZE(temp_limit_attrs),
+		.limit = temp_limit_attrs23,
+		.nlimit = ARRAY_SIZE(temp_limit_attrs23),
 	}
 };
 
@@ -1380,7 +1579,7 @@ static int pmbus_identify_common(struct i2c_client *client,
 		 */
 		switch (vout_mode >> 5) {
 		case 0:	/* linear mode      */
-			if (data->info->direct[PSC_VOLTAGE_OUT])
+			if (data->info->format[PSC_VOLTAGE_OUT] != linear)
 				return -ENODEV;
 
 			exponent = vout_mode & 0x1f;
@@ -1389,8 +1588,12 @@ static int pmbus_identify_common(struct i2c_client *client,
 				exponent |= ~0x1f;
 			data->exponent = exponent;
 			break;
+		case 1: /* VID mode         */
+			if (data->info->format[PSC_VOLTAGE_OUT] != vid)
+				return -ENODEV;
+			break;
 		case 2:	/* direct mode      */
-			if (!data->info->direct[PSC_VOLTAGE_OUT])
+			if (data->info->format[PSC_VOLTAGE_OUT] != direct)
 				return -ENODEV;
 			break;
 		default:
@@ -1457,18 +1660,6 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
 		ret = -EINVAL;
 		goto out_data;
 	}
-	/*
-	 * Bail out if more than one page was configured, but we can not
-	 * select the highest page. This is an indication that the wrong
-	 * chip type was selected. Better bail out now than keep
-	 * returning errors later on.
-	 */
-	if (info->pages > 1 && pmbus_set_page(client, info->pages - 1) < 0) {
-		dev_err(&client->dev, "Failed to select page %d\n",
-			info->pages - 1);
-		ret = -EINVAL;
-		goto out_data;
-	}
 
 	ret = pmbus_identify_common(client, data);
 	if (ret < 0) {
diff --git a/drivers/hwmon/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
index ace1c7319734..ace1c7319734 100644
--- a/drivers/hwmon/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
diff --git a/drivers/hwmon/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
index ffcc1cf3609d..ffcc1cf3609d 100644
--- a/drivers/hwmon/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c