Merge commit 'v2.6.38-rc3' into next

55 files changed, 2311 insertions, 1796 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a56f6adf3b76..773e484f1646 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -274,6 +274,16 @@ config SENSORS_ATXP1
 	  This driver can also be built as a module.  If so, the module
 	  will be called atxp1.
 
+config SENSORS_DS620
+	tristate "Dallas Semiconductor DS620"
+	depends on I2C
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS620 sensor chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds620.
+
 config SENSORS_DS1621
 	tristate "Dallas Semiconductor DS1621 and DS1625"
 	depends on I2C
@@ -608,8 +618,8 @@ config SENSORS_LM93
 	depends on I2C
 	select HWMON_VID
 	help
-	  If you say yes here you get support for National Semiconductor LM93
-	  sensor chips.
+	  If you say yes here you get support for National Semiconductor LM93,
+	  LM94, and compatible sensor chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm93.
@@ -734,6 +744,16 @@ config SENSORS_SHT15
 	  This driver can also be built as a module.  If so, the module
 	  will be called sht15.
 
+config SENSORS_SHT21
+	tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
+	depends on I2C
+	help
+	  If you say yes here you get support for the Sensiron SHT21, SHT25
+	  humidity and temperature sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sht21.
+
 config SENSORS_S3C
 	tristate "Samsung built-in ADC"
 	depends on S3C_ADC
@@ -789,10 +809,10 @@ config SENSORS_DME1737
 	  will be called dme1737.
 
 config SENSORS_EMC1403
-	tristate "SMSC EMC1403 thermal sensor"
+	tristate "SMSC EMC1403/23 thermal sensor"
 	depends on I2C
 	help
-	  If you say yes here you get support for the SMSC EMC1403
+	  If you say yes here you get support for the SMSC EMC1403/23
 	  temperature monitoring chip.
 
 	  Threshold values can be configured using sysfs.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 2479b3da272c..dde02d99c238 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_PKGTEMP)	+= pkgtemp.o
 obj-$(CONFIG_SENSORS_DME1737)	+= dme1737.o
+obj-$(CONFIG_SENSORS_DS620)	+= ds620.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_EMC1403)	+= emc1403.o
 obj-$(CONFIG_SENSORS_EMC2103)	+= emc2103.o
@@ -90,6 +91,7 @@ obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
+obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMM665)	+= smm665.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 03694cc17a32..8f07a9dda152 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -20,6 +20,9 @@
     the custom Abit uGuru chip found on Abit uGuru motherboards. Note: because
     of lack of specs the CPU/RAM voltage & frequency control is not supported!
 */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/init.h>
@@ -220,6 +223,10 @@ struct abituguru_data {
 	u8 pwm_settings[ABIT_UGURU_MAX_PWMS][5];
 };
 
+static const char *never_happen = "This should never happen.";
+static const char *report_this =
+	"Please report this to the abituguru maintainer (see MAINTAINERS)";
+
 /* wait till the uguru is in the specified state */
 static int abituguru_wait(struct abituguru_data *data, u8 state)
 {
@@ -438,8 +445,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
 
 	/* Test val is sane / usable for sensor type detection. */
 	if ((val < 10u) || (val > 250u)) {
-		printk(KERN_WARNING ABIT_UGURU_NAME
-			": bank1-sensor: %d reading (%d) too close to limits, "
+		pr_warn("bank1-sensor: %d reading (%d) too close to limits, "
 			"unable to determine sensor type, skipping sensor\n",
 			(int)sensor_addr, (int)val);
 		/* assume no sensor is there for sensors for which we can't
@@ -535,10 +541,8 @@ abituguru_detect_bank1_sensor_type_exit:
 				3) == 3)
 			break;
 	if (i == 3) {
-		printk(KERN_ERR ABIT_UGURU_NAME
-			": Fatal error could not restore original settings. "
-			"This should never happen please report this to the "
-			"abituguru maintainer (see MAINTAINERS)\n");
+		pr_err("Fatal error could not restore original settings. %s %s\n",
+		       never_happen, report_this);
 		return -ENODEV;
 	}
 	return ret;
@@ -1268,14 +1272,12 @@ static int __devinit abituguru_probe(struct platform_device *pdev)
 	}
 	/* Fail safe check, this should never happen! */
 	if (sysfs_names_free < 0) {
-		printk(KERN_ERR ABIT_UGURU_NAME ": Fatal error ran out of "
-		       "space for sysfs attr names. This should never "
-		       "happen please report to the abituguru maintainer "
-		       "(see MAINTAINERS)\n");
+		pr_err("Fatal error ran out of space for sysfs attr names. %s %s",
+		       never_happen, report_this);
 		res = -ENAMETOOLONG;
 		goto abituguru_probe_error;
 	}
-	printk(KERN_INFO ABIT_UGURU_NAME ": found Abit uGuru\n");
+	pr_info("found Abit uGuru\n");
 
 	/* Register sysfs hooks */
 	for (i = 0; i < sysfs_attr_i; i++)
@@ -1432,8 +1434,7 @@ static int __init abituguru_detect(void)
 		"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
 
 	if (force) {
-		printk(KERN_INFO ABIT_UGURU_NAME ": Assuming Abit uGuru is "
-				"present because of \"force\" parameter\n");
+		pr_info("Assuming Abit uGuru is present because of \"force\" parameter\n");
 		return ABIT_UGURU_BASE;
 	}
 
@@ -1467,8 +1468,7 @@ static int __init abituguru_init(void)
 
 	abituguru_pdev = platform_device_alloc(ABIT_UGURU_NAME, address);
 	if (!abituguru_pdev) {
-		printk(KERN_ERR ABIT_UGURU_NAME
-			": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		err = -ENOMEM;
 		goto exit_driver_unregister;
 	}
@@ -1479,15 +1479,13 @@ static int __init abituguru_init(void)
 
 	err = platform_device_add_resources(abituguru_pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR ABIT_UGURU_NAME
-			": Device resource addition failed (%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(abituguru_pdev);
 	if (err) {
-		printk(KERN_ERR ABIT_UGURU_NAME
-			": Device addition failed (%d)\n", err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 3cf28af614b5..48d21e22e930 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -23,6 +23,9 @@
     chip found on newer Abit uGuru motherboards. Note: because of lack of specs
     only reading the sensors and their settings is supported.
 */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -608,6 +611,9 @@ static int verbose = 1;
 module_param(verbose, bool, 0644);
 MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
 
+static const char *never_happen = "This should never happen.";
+static const char *report_this =
+	"Please report this to the abituguru3 maintainer (see MAINTAINERS)";
 
 /* wait while the uguru is busy (usually after a write) */
 static int abituguru3_wait_while_busy(struct abituguru3_data *data)
@@ -940,15 +946,13 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 		if (abituguru3_motherboards[i].id == id)
 			break;
 	if (!abituguru3_motherboards[i].id) {
-		printk(KERN_ERR ABIT_UGURU3_NAME ": error unknown motherboard "
-			"ID: %04X. Please report this to the abituguru3 "
-			"maintainer (see MAINTAINERS)\n", (unsigned int)id);
+		pr_err("error unknown motherboard ID: %04X. %s\n",
+		       (unsigned int)id, report_this);
 		goto abituguru3_probe_error;
 	}
 	data->sensors = abituguru3_motherboards[i].sensors;
 
-	printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
-		"ID: %04X\n", (unsigned int)id);
+	pr_info("found Abit uGuru3, motherboard ID: %04X\n", (unsigned int)id);
 
 	/* Fill the sysfs attr array */
 	sysfs_attr_i = 0;
@@ -957,11 +961,8 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 	for (i = 0; data->sensors[i].name; i++) {
 		/* Fail safe check, this should never happen! */
 		if (i >= ABIT_UGURU3_MAX_NO_SENSORS) {
-			printk(KERN_ERR ABIT_UGURU3_NAME
-				": Fatal error motherboard has more sensors "
-				"then ABIT_UGURU3_MAX_NO_SENSORS. This should "
-				"never happen please report to the abituguru3 "
-				"maintainer (see MAINTAINERS)\n");
+			pr_err("Fatal error motherboard has more sensors then ABIT_UGURU3_MAX_NO_SENSORS. %s %s\n",
+			       never_happen, report_this);
 			res = -ENAMETOOLONG;
 			goto abituguru3_probe_error;
 		}
@@ -983,10 +984,8 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 	}
 	/* Fail safe check, this should never happen! */
 	if (sysfs_names_free < 0) {
-		printk(KERN_ERR ABIT_UGURU3_NAME
-			": Fatal error ran out of space for sysfs attr names. "
-			"This should never happen please report to the "
-			"abituguru3 maintainer (see MAINTAINERS)\n");
+		pr_err("Fatal error ran out of space for sysfs attr names. %s %s\n",
+		       never_happen, report_this);
 		res = -ENAMETOOLONG;
 		goto abituguru3_probe_error;
 	}
@@ -1189,8 +1188,7 @@ static int __init abituguru3_detect(void)
 		"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
 
 	if (force) {
-		printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
-				"present because of \"force\" parameter\n");
+		pr_info("Assuming Abit uGuru3 is present because of \"force\" parameter\n");
 		return 0;
 	}
 
@@ -1219,10 +1217,8 @@ static int __init abituguru3_init(void)
 			return err;
 
 #ifdef CONFIG_DMI
-		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
-			"not detected using DMI. Please send the output of "
-			"\"dmidecode\" to the abituguru3 maintainer "
-			"(see MAINTAINERS)\n");
+		pr_warn("this motherboard was not detected using DMI. "
+			"Please send the output of \"dmidecode\" to the abituguru3 maintainer (see MAINTAINERS)\n");
 #endif
 	}
 
@@ -1233,8 +1229,7 @@ static int __init abituguru3_init(void)
 	abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
 						ABIT_UGURU3_BASE);
 	if (!abituguru3_pdev) {
-		printk(KERN_ERR ABIT_UGURU3_NAME
-			": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		err = -ENOMEM;
 		goto exit_driver_unregister;
 	}
@@ -1245,15 +1240,13 @@ static int __init abituguru3_init(void)
 
 	err = platform_device_add_resources(abituguru3_pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR ABIT_UGURU3_NAME
-			": Device resource addition failed (%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(abituguru3_pdev);
 	if (err) {
-		printk(KERN_ERR ABIT_UGURU3_NAME
-			": Device addition failed (%d)\n", err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index 1e4c21fc1a89..86d822aa9bbf 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -178,11 +178,13 @@ static int ad7414_probe(struct i2c_client *client,
 {
 	struct ad7414_data *data;
 	int conf;
-	int err = 0;
+	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+				     I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+		err = -EOPNOTSUPP;
 		goto exit;
+	}
 
 	data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL);
 	if (!data) {
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 4bf969c0a32b..be0fdd58aa29 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -916,27 +916,27 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1026_data *data = i2c_get_clientdata(client);
-	int val, orig_div, new_div, shift;
+	int val, orig_div, new_div;
 
 	val = simple_strtol(buf, NULL, 10);
 	new_div = DIV_TO_REG(val);
-	if (new_div == 0) {
-		return -EINVAL;
-	}
+
 	mutex_lock(&data->update_lock);
 	orig_div = data->fan_div[nr];
 	data->fan_div[nr] = DIV_FROM_REG(new_div);
 
 	if (nr < 4) { /* 0 <= nr < 4 */
-		shift = 2 * nr;
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
-			((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[0]) << 0) |
+				    (DIV_TO_REG(data->fan_div[1]) << 2) |
+				    (DIV_TO_REG(data->fan_div[2]) << 4) |
+				    (DIV_TO_REG(data->fan_div[3]) << 6));
 	} else { /* 3 < nr < 8 */
-		shift = 2 * (nr - 4);
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
-			((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[4]) << 0) |
+				    (DIV_TO_REG(data->fan_div[5]) << 2) |
+				    (DIV_TO_REG(data->fan_div[6]) << 4) |
+				    (DIV_TO_REG(data->fan_div[7]) << 6));
 	}
 
 	if (data->fan_div[nr] != orig_div) {
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 0727ad250793..9e234b981b83 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -20,7 +20,7 @@
  * Alarms	16-bit map of active alarms
  * Analog Out	0..1250 mV output
  *
- * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear'
+ * Chassis Intrusion: clear CI latch with 'echo 0 > intrusion0_alarm'
  *
  * Test hardware: Intel SE440BX-2 desktop motherboard --Grant
  *
@@ -476,13 +476,16 @@ static ssize_t set_aout(struct device *dev,
 static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout);
 
 /* chassis_clear */
-static ssize_t chassis_clear(struct device *dev,
+static ssize_t chassis_clear_legacy(struct device *dev,
 		struct device_attribute *attr,
 		const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	unsigned long val = simple_strtol(buf, NULL, 10);
 
+	dev_warn(dev, "Attribute chassis_clear is deprecated, "
+		 "use intrusion0_alarm instead\n");
+
 	if (val == 1) {
 		i2c_smbus_write_byte_data(client,
 				ADM9240_REG_CHASSIS_CLEAR, 0x80);
@@ -490,7 +493,29 @@ static ssize_t chassis_clear(struct device *dev,
 	}
 	return count;
 }
-static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear);
+static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear_legacy);
+
+static ssize_t chassis_clear(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adm9240_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	i2c_smbus_write_byte_data(client, ADM9240_REG_CHASSIS_CLEAR, 0x80);
+	data->valid = 0;		/* Force cache refresh */
+	mutex_unlock(&data->update_lock);
+	dev_dbg(&client->dev, "chassis intrusion latch cleared\n");
+
+	return count;
+}
+static SENSOR_DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR, show_alarm,
+		chassis_clear, 12);
 
 static struct attribute *adm9240_attributes[] = {
 	&sensor_dev_attr_in0_input.dev_attr.attr,
@@ -532,6 +557,7 @@ static struct attribute *adm9240_attributes[] = {
 	&dev_attr_alarms.attr,
 	&dev_attr_aout_output.attr,
 	&dev_attr_chassis_clear.attr,
+	&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
 	&dev_attr_cpu0_vid.attr,
 	NULL
 };
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index aac85f3aed50..c42c5a69a664 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -4,7 +4,7 @@
 
 	This driver is based on the lm75 and other lm_sensors/hwmon drivers
 
-	Written by Steve Hardy <steve@linuxrealtime.co.uk>
+	Written by Steve Hardy <shardy@redhat.com>
 
 	Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads7828.pdf
 
@@ -271,7 +271,7 @@ static void __exit sensors_ads7828_exit(void)
 	i2c_del_driver(&ads7828_driver);
 }
 
-MODULE_AUTHOR("Steve Hardy <steve@linuxrealtime.co.uk>");
+MODULE_AUTHOR("Steve Hardy <shardy@redhat.com>");
 MODULE_DESCRIPTION("ADS7828 driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 9e775717abb7..c6d1ce059aea 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -19,6 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
@@ -274,7 +276,7 @@ static int adt7470_read_temperatures(struct i2c_client *client,
 	i2c_smbus_write_byte_data(client, ADT7470_REG_PWM_CFG(2), pwm_cfg[1]);
 
 	if (res) {
-		printk(KERN_ERR "ha ha, interrupted");
+		pr_err("ha ha, interrupted\n");
 		return -EAGAIN;
 	}
 
@@ -1286,8 +1288,10 @@ static int adt7470_probe(struct i2c_client *client,
 	init_completion(&data->auto_update_stop);
 	data->auto_update = kthread_run(adt7470_update_thread, client,
 					dev_name(data->hwmon_dev));
-	if (IS_ERR(data->auto_update))
+	if (IS_ERR(data->auto_update)) {
+		err = PTR_ERR(data->auto_update);
 		goto exit_unregister;
+	}
 
 	return 0;
 
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index fa9708c2d723..4033974d1bb3 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -4,7 +4,7 @@
 	Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
 
 	Based on max6650.c:
-	Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+	Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
 
 	This program is free software; you can redistribute it and/or modify
 	it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index b6598aa557a0..4c0743660e9c 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -4,6 +4,7 @@
  * computers.
  *
  * Copyright (C) 2007 Nicolas Boichat <nicolas@boichat.ch>
+ * Copyright (C) 2010 Henrik Rydberg <rydberg@euromail.se>
  *
  * Based on hdaps.c driver:
  * Copyright (C) 2005 Robert Love <rml@novell.com>
@@ -26,10 +27,13 @@
  * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/input-polldev.h>
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/timer.h>
 #include <linux/dmi.h>
@@ -49,6 +53,7 @@
 
 #define APPLESMC_MAX_DATA_LENGTH 32
 
+/* wait up to 32 ms for a status change. */
 #define APPLESMC_MIN_WAIT	0x0040
 #define APPLESMC_MAX_WAIT	0x8000
 
@@ -73,104 +78,15 @@
 
 #define FANS_COUNT		"FNum" /* r-o ui8 */
 #define FANS_MANUAL		"FS! " /* r-w ui16 */
-#define FAN_ACTUAL_SPEED	"F0Ac" /* r-o fpe2 (2 bytes) */
-#define FAN_MIN_SPEED		"F0Mn" /* r-o fpe2 (2 bytes) */
-#define FAN_MAX_SPEED		"F0Mx" /* r-o fpe2 (2 bytes) */
-#define FAN_SAFE_SPEED		"F0Sf" /* r-o fpe2 (2 bytes) */
-#define FAN_TARGET_SPEED	"F0Tg" /* r-w fpe2 (2 bytes) */
-#define FAN_POSITION		"F0ID" /* r-o char[16] */
-
-/*
- * Temperature sensors keys (sp78 - 2 bytes).
- */
-static const char *temperature_sensors_sets[][41] = {
-/* Set 0: Macbook Pro */
-	{ "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
-	  "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
-/* Set 1: Macbook2 set */
-	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "TTF0", "Th0H",
-	  "Th0S", "Th1H", NULL },
-/* Set 2: Macbook set */
-	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "Th0H", "Th0S",
-	  "Th1H", "Ts0P", NULL },
-/* Set 3: Macmini set */
-	{ "TC0D", "TC0P", NULL },
-/* Set 4: Mac Pro (2 x Quad-Core) */
-	{ "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
-	  "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "THTG", "TH0P",
-	  "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
-	  "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
-	  "TM9S", "TN0H", "TS0C", NULL },
-/* Set 5: iMac */
-	{ "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
-	  "Tp0C", NULL },
-/* Set 6: Macbook3 set */
-	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
-	  "Th0S", "Th1H", NULL },
-/* Set 7: Macbook Air */
-	{ "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TC0P", "TCFP",
-	  "TTF0", "TW0P", "Th0H", "Tp0P", "TpFP", "Ts0P", "Ts0S", NULL },
-/* Set 8: Macbook Pro 4,1 (Penryn) */
-	{ "TB0T", "TC0D", "TC0P", "TG0D", "TG0H", "TTF0", "TW0P", "Th0H",
-	  "Th1H", "Th2H", "Tm0P", "Ts0P", NULL },
-/* Set 9: Macbook Pro 3,1 (Santa Rosa) */
-	{ "TALP", "TB0T", "TC0D", "TC0P", "TG0D", "TG0H", "TTF0", "TW0P",
-	  "Th0H", "Th1H", "Th2H", "Tm0P", "Ts0P", NULL },
-/* Set 10: iMac 5,1 */
-	{ "TA0P", "TC0D", "TC0P", "TG0D", "TH0P", "TO0P", "Tm0P", NULL },
-/* Set 11: Macbook 5,1 */
-	{ "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0P", "TN0D", "TN0P",
-	  "TTF0", "Th0H", "Th1H", "ThFH", "Ts0P", "Ts0S", NULL },
-/* Set 12: Macbook Pro 5,1 */
-	{ "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D",
-	  "TG0F", "TG0H", "TG0P", "TG0T", "TG1H", "TN0D", "TN0P", "TTF0",
-	  "Th2H", "Tm0P", "Ts0P", "Ts0S", NULL },
-/* Set 13: iMac 8,1 */
-	{ "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
-	  "TL0P", "TO0P", "TW0P", "Tm0P", "Tp0P", NULL },
-/* Set 14: iMac 6,1 */
-	{ "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TG0P", "TH0P",
-	  "TO0P", "Tp0P", NULL },
-/* Set 15: MacBook Air 2,1 */
-	{ "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0",
-	  "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P",
-	  "Ts0S", NULL },
-/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */
-	{ "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
-	  "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P",
-	  "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P",
-	  "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
-	  "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
-	  NULL },
-/* Set 17: iMac 9,1 */
-	{ "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
-	  "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
-/* Set 18: MacBook Pro 2,2 */
-	{ "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
-	  "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
-/* Set 19: Macbook Pro 5,3 */
-	{ "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TG0D",
-	  "TG0F", "TG0H", "TG0P", "TG0T", "TN0D", "TN0P", "TTF0", "Th2H",
-	  "Tm0P", "Ts0P", "Ts0S", NULL },
-/* Set 20: MacBook Pro 5,4 */
-	{ "TB0T", "TB1T", "TB2T", "TB3T", "TC0D", "TC0F", "TC0P", "TN0D",
-	  "TN0P", "TTF0", "Th2H", "Ts0P", "Ts0S", NULL },
-/* Set 21: MacBook Pro 6,2 */
-	{ "TB0T", "TB1T", "TB2T", "TC0C", "TC0D", "TC0P", "TC1C", "TG0D",
-	  "TG0P", "TG0T", "TMCD", "TP0P", "TPCD", "Th1H", "Th2H", "Tm0P",
-	  "Ts0P", "Ts0S", NULL },
-/* Set 22: MacBook Pro 7,1 */
-	{ "TB0T", "TB1T", "TB2T", "TC0D", "TC0P", "TN0D", "TN0P", "TN0S",
-	  "TN1D", "TN1F", "TN1G", "TN1S", "Th1H", "Ts0P", "Ts0S", NULL },
-};
+#define FAN_ID_FMT		"F%dID" /* r-o char[16] */
 
 /* List of keys used to read/write fan speeds */
-static const char* fan_speed_keys[] = {
-	FAN_ACTUAL_SPEED,
-	FAN_MIN_SPEED,
-	FAN_MAX_SPEED,
-	FAN_SAFE_SPEED,
-	FAN_TARGET_SPEED
+static const char *const fan_speed_fmt[] = {
+	"F%dAc",		/* actual speed */
+	"F%dMn",		/* minimum speed (rw) */
+	"F%dMx",		/* maximum speed */
+	"F%dSf",		/* safe speed - not all models */
+	"F%dTg",		/* target speed (manual: rw) */
 };
 
 #define INIT_TIMEOUT_MSECS	5000	/* wait up to 5s for device init ... */
@@ -184,14 +100,48 @@ static const char* fan_speed_keys[] = {
 #define SENSOR_Y 1
 #define SENSOR_Z 2
 
-/* Structure to be passed to DMI_MATCH function */
-struct dmi_match_data {
-/* Indicates whether this computer has an accelerometer. */
-	int accelerometer;
-/* Indicates whether this computer has light sensors and keyboard backlight. */
-	int light;
-/* Indicates which temperature sensors set to use. */
-	int temperature_set;
+#define to_index(attr) (to_sensor_dev_attr(attr)->index & 0xffff)
+#define to_option(attr) (to_sensor_dev_attr(attr)->index >> 16)
+
+/* Dynamic device node attributes */
+struct applesmc_dev_attr {
+	struct sensor_device_attribute sda;	/* hwmon attributes */
+	char name[32];				/* room for node file name */
+};
+
+/* Dynamic device node group */
+struct applesmc_node_group {
+	char *format;				/* format string */
+	void *show;				/* show function */
+	void *store;				/* store function */
+	int option;				/* function argument */
+	struct applesmc_dev_attr *nodes;	/* dynamic node array */
+};
+
+/* AppleSMC entry - cached register information */
+struct applesmc_entry {
+	char key[5];		/* four-letter key code */
+	u8 valid;		/* set when entry is successfully read once */
+	u8 len;			/* bounded by APPLESMC_MAX_DATA_LENGTH */
+	char type[5];		/* four-letter type code */
+	u8 flags;		/* 0x10: func; 0x40: write; 0x80: read */
+};
+
+/* Register lookup and registers common to all SMCs */
+static struct applesmc_registers {
+	struct mutex mutex;		/* register read/write mutex */
+	unsigned int key_count;		/* number of SMC registers */
+	unsigned int fan_count;		/* number of fans */
+	unsigned int temp_count;	/* number of temperature registers */
+	unsigned int temp_begin;	/* temperature lower index bound */
+	unsigned int temp_end;		/* temperature upper index bound */
+	int num_light_sensors;		/* number of light sensors */
+	bool has_accelerometer;		/* has motion sensor */
+	bool has_key_backlight;		/* has keyboard backlight */
+	bool init_complete;		/* true when fully initialized */
+	struct applesmc_entry *cache;	/* cached key entries */
+} smcreg = {
+	.mutex = __MUTEX_INITIALIZER(smcreg.mutex),
 };
 
 static const int debug;
@@ -203,20 +153,6 @@ static u8 backlight_state[2];
 static struct device *hwmon_dev;
 static struct input_polled_dev *applesmc_idev;
 
-/* Indicates whether this computer has an accelerometer. */
-static unsigned int applesmc_accelerometer;
-
-/* Indicates whether this computer has light sensors and keyboard backlight. */
-static unsigned int applesmc_light;
-
-/* The number of fans handled by the driver */
-static unsigned int fans_handled;
-
-/* Indicates which temperature sensors set to use. */
-static unsigned int applesmc_temperature_set;
-
-static DEFINE_MUTEX(applesmc_lock);
-
 /*
  * Last index written to key_at_index sysfs file, and value to use for all other
  * key_at_index_* sysfs files.
@@ -238,18 +174,10 @@ static int __wait_status(u8 val)
 
 	for (us = APPLESMC_MIN_WAIT; us < APPLESMC_MAX_WAIT; us <<= 1) {
 		udelay(us);
-		if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == val) {
-			if (debug)
-				printk(KERN_DEBUG
-					"Waited %d us for status %x\n",
-					2 * us - APPLESMC_MIN_WAIT, val);
+		if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == val)
 			return 0;
-		}
 	}
 
-	printk(KERN_WARNING "applesmc: wait status failed: %x != %x\n",
-						val, inb(APPLESMC_CMD_PORT));
-
 	return -EIO;
 }
 
@@ -267,159 +195,242 @@ static int send_command(u8 cmd)
 		if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == 0x0c)
 			return 0;
 	}
-	printk(KERN_WARNING "applesmc: command failed: %x -> %x\n",
-		cmd, inb(APPLESMC_CMD_PORT));
 	return -EIO;
 }
 
-/*
- * applesmc_read_key - reads len bytes from a given key, and put them in buffer.
- * Returns zero on success or a negative error on failure. Callers must
- * hold applesmc_lock.
- */
-static int applesmc_read_key(const char* key, u8* buffer, u8 len)
+static int send_argument(const char *key)
 {
 	int i;
 
-	if (len > APPLESMC_MAX_DATA_LENGTH) {
-		printk(KERN_ERR	"applesmc_read_key: cannot read more than "
-					"%d bytes\n", APPLESMC_MAX_DATA_LENGTH);
-		return -EINVAL;
-	}
-
-	if (send_command(APPLESMC_READ_CMD))
-		return -EIO;
-
 	for (i = 0; i < 4; i++) {
 		outb(key[i], APPLESMC_DATA_PORT);
 		if (__wait_status(0x04))
 			return -EIO;
 	}
-	if (debug)
-		printk(KERN_DEBUG "<%s", key);
+	return 0;
+}
+
+static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
+{
+	int i;
+
+	if (send_command(cmd) || send_argument(key)) {
+		pr_warn("%s: read arg fail\n", key);
+		return -EIO;
+	}
 
 	outb(len, APPLESMC_DATA_PORT);
-	if (debug)
-		printk(KERN_DEBUG ">%x", len);
 
 	for (i = 0; i < len; i++) {
-		if (__wait_status(0x05))
+		if (__wait_status(0x05)) {
+			pr_warn("%s: read data fail\n", key);
 			return -EIO;
+		}
 		buffer[i] = inb(APPLESMC_DATA_PORT);
-		if (debug)
-			printk(KERN_DEBUG "<%x", buffer[i]);
 	}
-	if (debug)
-		printk(KERN_DEBUG "\n");
 
 	return 0;
 }
 
-/*
- * applesmc_write_key - writes len bytes from buffer to a given key.
- * Returns zero on success or a negative error on failure. Callers must
- * hold applesmc_lock.
- */
-static int applesmc_write_key(const char* key, u8* buffer, u8 len)
+static int write_smc(u8 cmd, const char *key, const u8 *buffer, u8 len)
 {
 	int i;
 
-	if (len > APPLESMC_MAX_DATA_LENGTH) {
-		printk(KERN_ERR	"applesmc_write_key: cannot write more than "
-					"%d bytes\n", APPLESMC_MAX_DATA_LENGTH);
-		return -EINVAL;
-	}
-
-	if (send_command(APPLESMC_WRITE_CMD))
+	if (send_command(cmd) || send_argument(key)) {
+		pr_warn("%s: write arg fail\n", key);
 		return -EIO;
-
-	for (i = 0; i < 4; i++) {
-		outb(key[i], APPLESMC_DATA_PORT);
-		if (__wait_status(0x04))
-			return -EIO;
 	}
 
 	outb(len, APPLESMC_DATA_PORT);
 
 	for (i = 0; i < len; i++) {
-		if (__wait_status(0x04))
+		if (__wait_status(0x04)) {
+			pr_warn("%s: write data fail\n", key);
 			return -EIO;
+		}
 		outb(buffer[i], APPLESMC_DATA_PORT);
 	}
 
 	return 0;
 }
 
+static int read_register_count(unsigned int *count)
+{
+	__be32 be;
+	int ret;
+
+	ret = read_smc(APPLESMC_READ_CMD, KEY_COUNT_KEY, (u8 *)&be, 4);
+	if (ret)
+		return ret;
+
+	*count = be32_to_cpu(be);
+	return 0;
+}
+
 /*
- * applesmc_get_key_at_index - get key at index, and put the result in key
- * (char[6]). Returns zero on success or a negative error on failure. Callers
- * must hold applesmc_lock.
+ * Serialized I/O
+ *
+ * Returns zero on success or a negative error on failure.
+ * All functions below are concurrency safe - callers should NOT hold lock.
  */
-static int applesmc_get_key_at_index(int index, char* key)
+
+static int applesmc_read_entry(const struct applesmc_entry *entry,
+			       u8 *buf, u8 len)
 {
-	int i;
-	u8 readkey[4];
-	readkey[0] = index >> 24;
-	readkey[1] = index >> 16;
-	readkey[2] = index >> 8;
-	readkey[3] = index;
+	int ret;
 
-	if (send_command(APPLESMC_GET_KEY_BY_INDEX_CMD))
-		return -EIO;
+	if (entry->len != len)
+		return -EINVAL;
+	mutex_lock(&smcreg.mutex);
+	ret = read_smc(APPLESMC_READ_CMD, entry->key, buf, len);
+	mutex_unlock(&smcreg.mutex);
 
-	for (i = 0; i < 4; i++) {
-		outb(readkey[i], APPLESMC_DATA_PORT);
-		if (__wait_status(0x04))
-			return -EIO;
+	return ret;
+}
+
+static int applesmc_write_entry(const struct applesmc_entry *entry,
+				const u8 *buf, u8 len)
+{
+	int ret;
+
+	if (entry->len != len)
+		return -EINVAL;
+	mutex_lock(&smcreg.mutex);
+	ret = write_smc(APPLESMC_WRITE_CMD, entry->key, buf, len);
+	mutex_unlock(&smcreg.mutex);
+	return ret;
+}
+
+static const struct applesmc_entry *applesmc_get_entry_by_index(int index)
+{
+	struct applesmc_entry *cache = &smcreg.cache[index];
+	u8 key[4], info[6];
+	__be32 be;
+	int ret = 0;
+
+	if (cache->valid)
+		return cache;
+
+	mutex_lock(&smcreg.mutex);
+
+	if (cache->valid)
+		goto out;
+	be = cpu_to_be32(index);
+	ret = read_smc(APPLESMC_GET_KEY_BY_INDEX_CMD, (u8 *)&be, key, 4);
+	if (ret)
+		goto out;
+	ret = read_smc(APPLESMC_GET_KEY_TYPE_CMD, key, info, 6);
+	if (ret)
+		goto out;
+
+	memcpy(cache->key, key, 4);
+	cache->len = info[0];
+	memcpy(cache->type, &info[1], 4);
+	cache->flags = info[5];
+	cache->valid = 1;
+
+out:
+	mutex_unlock(&smcreg.mutex);
+	if (ret)
+		return ERR_PTR(ret);
+	return cache;
+}
+
+static int applesmc_get_lower_bound(unsigned int *lo, const char *key)
+{
+	int begin = 0, end = smcreg.key_count;
+	const struct applesmc_entry *entry;
+
+	while (begin != end) {
+		int middle = begin + (end - begin) / 2;
+		entry = applesmc_get_entry_by_index(middle);
+		if (IS_ERR(entry))
+			return PTR_ERR(entry);
+		if (strcmp(entry->key, key) < 0)
+			begin = middle + 1;
+		else
+			end = middle;
 	}
 
-	outb(4, APPLESMC_DATA_PORT);
+	*lo = begin;
+	return 0;
+}
 
-	for (i = 0; i < 4; i++) {
-		if (__wait_status(0x05))
-			return -EIO;
-		key[i] = inb(APPLESMC_DATA_PORT);
+static int applesmc_get_upper_bound(unsigned int *hi, const char *key)
+{
+	int begin = 0, end = smcreg.key_count;
+	const struct applesmc_entry *entry;
+
+	while (begin != end) {
+		int middle = begin + (end - begin) / 2;
+		entry = applesmc_get_entry_by_index(middle);
+		if (IS_ERR(entry))
+			return PTR_ERR(entry);
+		if (strcmp(key, entry->key) < 0)
+			end = middle;
+		else
+			begin = middle + 1;
 	}
-	key[4] = 0;
 
+	*hi = begin;
 	return 0;
 }
 
-/*
- * applesmc_get_key_type - get key type, and put the result in type (char[6]).
- * Returns zero on success or a negative error on failure. Callers must
- * hold applesmc_lock.
- */
-static int applesmc_get_key_type(char* key, char* type)
+static const struct applesmc_entry *applesmc_get_entry_by_key(const char *key)
 {
-	int i;
+	int begin, end;
+	int ret;
 
-	if (send_command(APPLESMC_GET_KEY_TYPE_CMD))
-		return -EIO;
+	ret = applesmc_get_lower_bound(&begin, key);
+	if (ret)
+		return ERR_PTR(ret);
+	ret = applesmc_get_upper_bound(&end, key);
+	if (ret)
+		return ERR_PTR(ret);
+	if (end - begin != 1)
+		return ERR_PTR(-EINVAL);
 
-	for (i = 0; i < 4; i++) {
-		outb(key[i], APPLESMC_DATA_PORT);
-		if (__wait_status(0x04))
-			return -EIO;
-	}
+	return applesmc_get_entry_by_index(begin);
+}
 
-	outb(6, APPLESMC_DATA_PORT);
+static int applesmc_read_key(const char *key, u8 *buffer, u8 len)
+{
+	const struct applesmc_entry *entry;
 
-	for (i = 0; i < 6; i++) {
-		if (__wait_status(0x05))
-			return -EIO;
-		type[i] = inb(APPLESMC_DATA_PORT);
-	}
-	type[5] = 0;
+	entry = applesmc_get_entry_by_key(key);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
+
+	return applesmc_read_entry(entry, buffer, len);
+}
+
+static int applesmc_write_key(const char *key, const u8 *buffer, u8 len)
+{
+	const struct applesmc_entry *entry;
 
+	entry = applesmc_get_entry_by_key(key);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
+
+	return applesmc_write_entry(entry, buffer, len);
+}
+
+static int applesmc_has_key(const char *key, bool *value)
+{
+	const struct applesmc_entry *entry;
+
+	entry = applesmc_get_entry_by_key(key);
+	if (IS_ERR(entry) && PTR_ERR(entry) != -EINVAL)
+		return PTR_ERR(entry);
+
+	*value = !IS_ERR(entry);
 	return 0;
 }
 
 /*
- * applesmc_read_motion_sensor - Read motion sensor (X, Y or Z). Callers must
- * hold applesmc_lock.
+ * applesmc_read_motion_sensor - Read motion sensor (X, Y or Z).
  */
-static int applesmc_read_motion_sensor(int index, s16* value)
+static int applesmc_read_motion_sensor(int index, s16 *value)
 {
 	u8 buffer[2];
 	int ret;
@@ -444,69 +455,120 @@ static int applesmc_read_motion_sensor(int index, s16* value)
 }
 
 /*
- * applesmc_device_init - initialize the accelerometer.  Returns zero on success
- * and negative error code on failure.  Can sleep.
+ * applesmc_device_init - initialize the accelerometer.  Can sleep.
  */
-static int applesmc_device_init(void)
+static void applesmc_device_init(void)
 {
-	int total, ret = -ENXIO;
+	int total;
 	u8 buffer[2];
 
-	if (!applesmc_accelerometer)
-		return 0;
-
-	mutex_lock(&applesmc_lock);
+	if (!smcreg.has_accelerometer)
+		return;
 
 	for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) {
-		if (debug)
-			printk(KERN_DEBUG "applesmc try %d\n", total);
 		if (!applesmc_read_key(MOTION_SENSOR_KEY, buffer, 2) &&
-				(buffer[0] != 0x00 || buffer[1] != 0x00)) {
-			if (total == INIT_TIMEOUT_MSECS) {
-				printk(KERN_DEBUG "applesmc: device has"
-						" already been initialized"
-						" (0x%02x, 0x%02x).\n",
-						buffer[0], buffer[1]);
-			} else {
-				printk(KERN_DEBUG "applesmc: device"
-						" successfully initialized"
-						" (0x%02x, 0x%02x).\n",
-						buffer[0], buffer[1]);
-			}
-			ret = 0;
-			goto out;
-		}
+				(buffer[0] != 0x00 || buffer[1] != 0x00))
+			return;
 		buffer[0] = 0xe0;
 		buffer[1] = 0x00;
 		applesmc_write_key(MOTION_SENSOR_KEY, buffer, 2);
 		msleep(INIT_WAIT_MSECS);
 	}
 
-	printk(KERN_WARNING "applesmc: failed to init the device\n");
-
-out:
-	mutex_unlock(&applesmc_lock);
-	return ret;
+	pr_warn("failed to init the device\n");
 }
 
 /*
- * applesmc_get_fan_count - get the number of fans. Callers must NOT hold
- * applesmc_lock.
+ * applesmc_init_smcreg_try - Try to initialize register cache. Idempotent.
  */
-static int applesmc_get_fan_count(void)
+static int applesmc_init_smcreg_try(void)
 {
+	struct applesmc_registers *s = &smcreg;
+	bool left_light_sensor, right_light_sensor;
+	u8 tmp[1];
 	int ret;
-	u8 buffer[1];
 
-	mutex_lock(&applesmc_lock);
+	if (s->init_complete)
+		return 0;
 
-	ret = applesmc_read_key(FANS_COUNT, buffer, 1);
+	ret = read_register_count(&s->key_count);
+	if (ret)
+		return ret;
+
+	if (!s->cache)
+		s->cache = kcalloc(s->key_count, sizeof(*s->cache), GFP_KERNEL);
+	if (!s->cache)
+		return -ENOMEM;
 
-	mutex_unlock(&applesmc_lock);
+	ret = applesmc_read_key(FANS_COUNT, tmp, 1);
 	if (ret)
 		return ret;
-	else
-		return buffer[0];
+	s->fan_count = tmp[0];
+
+	ret = applesmc_get_lower_bound(&s->temp_begin, "T");
+	if (ret)
+		return ret;
+	ret = applesmc_get_lower_bound(&s->temp_end, "U");
+	if (ret)
+		return ret;
+	s->temp_count = s->temp_end - s->temp_begin;
+
+	ret = applesmc_has_key(LIGHT_SENSOR_LEFT_KEY, &left_light_sensor);
+	if (ret)
+		return ret;
+	ret = applesmc_has_key(LIGHT_SENSOR_RIGHT_KEY, &right_light_sensor);
+	if (ret)
+		return ret;
+	ret = applesmc_has_key(MOTION_SENSOR_KEY, &s->has_accelerometer);
+	if (ret)
+		return ret;
+	ret = applesmc_has_key(BACKLIGHT_KEY, &s->has_key_backlight);
+	if (ret)
+		return ret;
+
+	s->num_light_sensors = left_light_sensor + right_light_sensor;
+	s->init_complete = true;
+
+	pr_info("key=%d fan=%d temp=%d acc=%d lux=%d kbd=%d\n",
+	       s->key_count, s->fan_count, s->temp_count,
+	       s->has_accelerometer,
+	       s->num_light_sensors,
+	       s->has_key_backlight);
+
+	return 0;
+}
+
+/*
+ * applesmc_init_smcreg - Initialize register cache.
+ *
+ * Retries until initialization is successful, or the operation times out.
+ *
+ */
+static int applesmc_init_smcreg(void)
+{
+	int ms, ret;
+
+	for (ms = 0; ms < INIT_TIMEOUT_MSECS; ms += INIT_WAIT_MSECS) {
+		ret = applesmc_init_smcreg_try();
+		if (!ret) {
+			if (ms)
+				pr_info("init_smcreg() took %d ms\n", ms);
+			return 0;
+		}
+		msleep(INIT_WAIT_MSECS);
+	}
+
+	kfree(smcreg.cache);
+	smcreg.cache = NULL;
+
+	return ret;
+}
+
+static void applesmc_destroy_smcreg(void)
+{
+	kfree(smcreg.cache);
+	smcreg.cache = NULL;
+	smcreg.init_complete = false;
 }
 
 /* Device model stuff */
@@ -514,30 +576,27 @@ static int applesmc_probe(struct platform_device *dev)
 {
 	int ret;
 
-	ret = applesmc_device_init();
+	ret = applesmc_init_smcreg();
 	if (ret)
 		return ret;
 
-	printk(KERN_INFO "applesmc: device successfully initialized.\n");
+	applesmc_device_init();
+
 	return 0;
 }
 
 /* Synchronize device with memorized backlight state */
 static int applesmc_pm_resume(struct device *dev)
 {
-	mutex_lock(&applesmc_lock);
-	if (applesmc_light)
+	if (smcreg.has_key_backlight)
 		applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2);
-	mutex_unlock(&applesmc_lock);
 	return 0;
 }
 
 /* Reinitialize device on resume from hibernation */
 static int applesmc_pm_restore(struct device *dev)
 {
-	int ret = applesmc_device_init();
-	if (ret)
-		return ret;
+	applesmc_device_init();
 	return applesmc_pm_resume(dev);
 }
 
@@ -571,20 +630,15 @@ static void applesmc_idev_poll(struct input_polled_dev *dev)
 	struct input_dev *idev = dev->input;
 	s16 x, y;
 
-	mutex_lock(&applesmc_lock);
-
 	if (applesmc_read_motion_sensor(SENSOR_X, &x))
-		goto out;
+		return;
 	if (applesmc_read_motion_sensor(SENSOR_Y, &y))
-		goto out;
+		return;
 
 	x = -x;
 	input_report_abs(idev, ABS_X, x - rest_x);
 	input_report_abs(idev, ABS_Y, y - rest_y);
 	input_sync(idev);
-
-out:
-	mutex_unlock(&applesmc_lock);
 }
 
 /* Sysfs Files */
@@ -601,8 +655,6 @@ static ssize_t applesmc_position_show(struct device *dev,
 	int ret;
 	s16 x, y, z;
 
-	mutex_lock(&applesmc_lock);
-
 	ret = applesmc_read_motion_sensor(SENSOR_X, &x);
 	if (ret)
 		goto out;
@@ -614,7 +666,6 @@ static ssize_t applesmc_position_show(struct device *dev,
 		goto out;
 
 out:
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -624,20 +675,20 @@ out:
 static ssize_t applesmc_light_show(struct device *dev,
 				struct device_attribute *attr, char *sysfsbuf)
 {
+	const struct applesmc_entry *entry;
 	static int data_length;
 	int ret;
 	u8 left = 0, right = 0;
-	u8 buffer[10], query[6];
-
-	mutex_lock(&applesmc_lock);
+	u8 buffer[10];
 
 	if (!data_length) {
-		ret = applesmc_get_key_type(LIGHT_SENSOR_LEFT_KEY, query);
-		if (ret)
-			goto out;
-		data_length = clamp_val(query[0], 0, 10);
-		printk(KERN_INFO "applesmc: light sensor data length set to "
-			"%d\n", data_length);
+		entry = applesmc_get_entry_by_key(LIGHT_SENSOR_LEFT_KEY);
+		if (IS_ERR(entry))
+			return PTR_ERR(entry);
+		if (entry->len > 10)
+			return -ENXIO;
+		data_length = entry->len;
+		pr_info("light sensor data length set to %d\n", data_length);
 	}
 
 	ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, buffer, data_length);
@@ -653,7 +704,6 @@ static ssize_t applesmc_light_show(struct device *dev,
 	right = buffer[2];
 
 out:
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -664,36 +714,44 @@ out:
 static ssize_t applesmc_show_sensor_label(struct device *dev,
 			struct device_attribute *devattr, char *sysfsbuf)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	const char *key =
-		temperature_sensors_sets[applesmc_temperature_set][attr->index];
+	int index = smcreg.temp_begin + to_index(devattr);
+	const struct applesmc_entry *entry;
+
+	entry = applesmc_get_entry_by_index(index);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
 
-	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key);
+	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->key);
 }
 
 /* Displays degree Celsius * 1000 */
 static ssize_t applesmc_show_temperature(struct device *dev,
 			struct device_attribute *devattr, char *sysfsbuf)
 {
+	int index = smcreg.temp_begin + to_index(devattr);
+	const struct applesmc_entry *entry;
 	int ret;
 	u8 buffer[2];
 	unsigned int temp;
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	const char* key =
-		temperature_sensors_sets[applesmc_temperature_set][attr->index];
-
-	mutex_lock(&applesmc_lock);
 
-	ret = applesmc_read_key(key, buffer, 2);
-	temp = buffer[0]*1000;
-	temp += (buffer[1] >> 6) * 250;
-
-	mutex_unlock(&applesmc_lock);
+	entry = applesmc_get_entry_by_index(index);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
+	if (entry->len > 2)
+		return -EINVAL;
 
+	ret = applesmc_read_entry(entry, buffer, entry->len);
 	if (ret)
 		return ret;
-	else
-		return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", temp);
+
+	if (entry->len == 2) {
+		temp = buffer[0] * 1000;
+		temp += (buffer[1] >> 6) * 250;
+	} else {
+		temp = buffer[0] * 4000;
+	}
+
+	return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", temp);
 }
 
 static ssize_t applesmc_show_fan_speed(struct device *dev,
@@ -703,21 +761,12 @@ static ssize_t applesmc_show_fan_speed(struct device *dev,
 	unsigned int speed = 0;
 	char newkey[5];
 	u8 buffer[2];
-	struct sensor_device_attribute_2 *sensor_attr =
-						to_sensor_dev_attr_2(attr);
-
-	newkey[0] = fan_speed_keys[sensor_attr->nr][0];
-	newkey[1] = '0' + sensor_attr->index;
-	newkey[2] = fan_speed_keys[sensor_attr->nr][2];
-	newkey[3] = fan_speed_keys[sensor_attr->nr][3];
-	newkey[4] = 0;
 
-	mutex_lock(&applesmc_lock);
+	sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
 
 	ret = applesmc_read_key(newkey, buffer, 2);
 	speed = ((buffer[0] << 8 | buffer[1]) >> 2);
 
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -729,30 +778,19 @@ static ssize_t applesmc_store_fan_speed(struct device *dev,
 					const char *sysfsbuf, size_t count)
 {
 	int ret;
-	u32 speed;
+	unsigned long speed;
 	char newkey[5];
 	u8 buffer[2];
-	struct sensor_device_attribute_2 *sensor_attr =
-						to_sensor_dev_attr_2(attr);
-
-	speed = simple_strtoul(sysfsbuf, NULL, 10);
-
-	if (speed > 0x4000) /* Bigger than a 14-bit value */
-		return -EINVAL;
 
-	newkey[0] = fan_speed_keys[sensor_attr->nr][0];
-	newkey[1] = '0' + sensor_attr->index;
-	newkey[2] = fan_speed_keys[sensor_attr->nr][2];
-	newkey[3] = fan_speed_keys[sensor_attr->nr][3];
-	newkey[4] = 0;
+	if (strict_strtoul(sysfsbuf, 10, &speed) < 0 || speed >= 0x4000)
+		return -EINVAL;		/* Bigger than a 14-bit value */
 
-	mutex_lock(&applesmc_lock);
+	sprintf(newkey, fan_speed_fmt[to_option(attr)], to_index(attr));
 
 	buffer[0] = (speed >> 6) & 0xff;
 	buffer[1] = (speed << 2) & 0xff;
 	ret = applesmc_write_key(newkey, buffer, 2);
 
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -760,19 +798,15 @@ static ssize_t applesmc_store_fan_speed(struct device *dev,
 }
 
 static ssize_t applesmc_show_fan_manual(struct device *dev,
-			struct device_attribute *devattr, char *sysfsbuf)
+			struct device_attribute *attr, char *sysfsbuf)
 {
 	int ret;
 	u16 manual = 0;
 	u8 buffer[2];
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	mutex_lock(&applesmc_lock);
 
 	ret = applesmc_read_key(FANS_MANUAL, buffer, 2);
-	manual = ((buffer[0] << 8 | buffer[1]) >> attr->index) & 0x01;
+	manual = ((buffer[0] << 8 | buffer[1]) >> to_index(attr)) & 0x01;
 
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -780,18 +814,16 @@ static ssize_t applesmc_show_fan_manual(struct device *dev,
 }
 
 static ssize_t applesmc_store_fan_manual(struct device *dev,
-					 struct device_attribute *devattr,
+					 struct device_attribute *attr,
 					 const char *sysfsbuf, size_t count)
 {
 	int ret;
 	u8 buffer[2];
-	u32 input;
+	unsigned long input;
 	u16 val;
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	input = simple_strtoul(sysfsbuf, NULL, 10);
 
-	mutex_lock(&applesmc_lock);
+	if (strict_strtoul(sysfsbuf, 10, &input) < 0)
+		return -EINVAL;
 
 	ret = applesmc_read_key(FANS_MANUAL, buffer, 2);
 	val = (buffer[0] << 8 | buffer[1]);
@@ -799,9 +831,9 @@ static ssize_t applesmc_store_fan_manual(struct device *dev,
 		goto out;
 
 	if (input)
-		val = val | (0x01 << attr->index);
+		val = val | (0x01 << to_index(attr));
 	else
-		val = val & ~(0x01 << attr->index);
+		val = val & ~(0x01 << to_index(attr));
 
 	buffer[0] = (val >> 8) & 0xFF;
 	buffer[1] = val & 0xFF;
@@ -809,7 +841,6 @@ static ssize_t applesmc_store_fan_manual(struct device *dev,
 	ret = applesmc_write_key(FANS_MANUAL, buffer, 2);
 
 out:
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -822,21 +853,12 @@ static ssize_t applesmc_show_fan_position(struct device *dev,
 	int ret;
 	char newkey[5];
 	u8 buffer[17];
-	struct sensor_device_attribute_2 *sensor_attr =
-						to_sensor_dev_attr_2(attr);
-
-	newkey[0] = FAN_POSITION[0];
-	newkey[1] = '0' + sensor_attr->index;
-	newkey[2] = FAN_POSITION[2];
-	newkey[3] = FAN_POSITION[3];
-	newkey[4] = 0;
 
-	mutex_lock(&applesmc_lock);
+	sprintf(newkey, FAN_ID_FMT, to_index(attr));
 
 	ret = applesmc_read_key(newkey, buffer, 16);
 	buffer[16] = 0;
 
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -852,18 +874,14 @@ static ssize_t applesmc_calibrate_show(struct device *dev,
 static ssize_t applesmc_calibrate_store(struct device *dev,
 	struct device_attribute *attr, const char *sysfsbuf, size_t count)
 {
-	mutex_lock(&applesmc_lock);
 	applesmc_calibrate();
-	mutex_unlock(&applesmc_lock);
 
 	return count;
 }
 
 static void applesmc_backlight_set(struct work_struct *work)
 {
-	mutex_lock(&applesmc_lock);
 	applesmc_write_key(BACKLIGHT_KEY, backlight_state, 2);
-	mutex_unlock(&applesmc_lock);
 }
 static DECLARE_WORK(backlight_work, &applesmc_backlight_set);
 
@@ -886,13 +904,10 @@ static ssize_t applesmc_key_count_show(struct device *dev,
 	u8 buffer[4];
 	u32 count;
 
-	mutex_lock(&applesmc_lock);
-
 	ret = applesmc_read_key(KEY_COUNT_KEY, buffer, 4);
 	count = ((u32)buffer[0]<<24) + ((u32)buffer[1]<<16) +
 						((u32)buffer[2]<<8) + buffer[3];
 
-	mutex_unlock(&applesmc_lock);
 	if (ret)
 		return ret;
 	else
@@ -902,113 +917,53 @@ static ssize_t applesmc_key_count_show(struct device *dev,
 static ssize_t applesmc_key_at_index_read_show(struct device *dev,
 				struct device_attribute *attr, char *sysfsbuf)
 {
-	char key[5];
-	char info[6];
+	const struct applesmc_entry *entry;
 	int ret;
 
-	mutex_lock(&applesmc_lock);
-
-	ret = applesmc_get_key_at_index(key_at_index, key);
-
-	if (ret || !key[0]) {
-		mutex_unlock(&applesmc_lock);
-
-		return -EINVAL;
-	}
-
-	ret = applesmc_get_key_type(key, info);
-
-	if (ret) {
-		mutex_unlock(&applesmc_lock);
-
+	entry = applesmc_get_entry_by_index(key_at_index);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
+	ret = applesmc_read_entry(entry, sysfsbuf, entry->len);
+	if (ret)
 		return ret;
-	}
-
-	/*
-	 * info[0] maximum value (APPLESMC_MAX_DATA_LENGTH) is much lower than
-	 * PAGE_SIZE, so we don't need any checks before writing to sysfsbuf.
-	 */
-	ret = applesmc_read_key(key, sysfsbuf, info[0]);
-
-	mutex_unlock(&applesmc_lock);
 
-	if (!ret) {
-		return info[0];
-	} else {
-		return ret;
-	}
+	return entry->len;
 }
 
 static ssize_t applesmc_key_at_index_data_length_show(struct device *dev,
 				struct device_attribute *attr, char *sysfsbuf)
 {
-	char key[5];
-	char info[6];
-	int ret;
-
-	mutex_lock(&applesmc_lock);
-
-	ret = applesmc_get_key_at_index(key_at_index, key);
+	const struct applesmc_entry *entry;
 
-	if (ret || !key[0]) {
-		mutex_unlock(&applesmc_lock);
+	entry = applesmc_get_entry_by_index(key_at_index);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
 
-		return -EINVAL;
-	}
-
-	ret = applesmc_get_key_type(key, info);
-
-	mutex_unlock(&applesmc_lock);
-
-	if (!ret)
-		return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", info[0]);
-	else
-		return ret;
+	return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", entry->len);
 }
 
 static ssize_t applesmc_key_at_index_type_show(struct device *dev,
 				struct device_attribute *attr, char *sysfsbuf)
 {
-	char key[5];
-	char info[6];
-	int ret;
-
-	mutex_lock(&applesmc_lock);
-
-	ret = applesmc_get_key_at_index(key_at_index, key);
-
-	if (ret || !key[0]) {
-		mutex_unlock(&applesmc_lock);
-
-		return -EINVAL;
-	}
-
-	ret = applesmc_get_key_type(key, info);
+	const struct applesmc_entry *entry;
 
-	mutex_unlock(&applesmc_lock);
+	entry = applesmc_get_entry_by_index(key_at_index);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
 
-	if (!ret)
-		return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", info+1);
-	else
-		return ret;
+	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->type);
 }
 
 static ssize_t applesmc_key_at_index_name_show(struct device *dev,
 				struct device_attribute *attr, char *sysfsbuf)
 {
-	char key[5];
-	int ret;
+	const struct applesmc_entry *entry;
 
-	mutex_lock(&applesmc_lock);
+	entry = applesmc_get_entry_by_index(key_at_index);
+	if (IS_ERR(entry))
+		return PTR_ERR(entry);
 
-	ret = applesmc_get_key_at_index(key_at_index, key);
-
-	mutex_unlock(&applesmc_lock);
-
-	if (!ret && key[0])
-		return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key);
-	else
-		return -EINVAL;
+	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->key);
 }
 
 static ssize_t applesmc_key_at_index_show(struct device *dev,
@@ -1020,12 +975,13 @@ static ssize_t applesmc_key_at_index_show(struct device *dev,
 static ssize_t applesmc_key_at_index_store(struct device *dev,
 	struct device_attribute *attr, const char *sysfsbuf, size_t count)
 {
-	mutex_lock(&applesmc_lock);
-
-	key_at_index = simple_strtoul(sysfsbuf, NULL, 10);
+	unsigned long newkey;
 
-	mutex_unlock(&applesmc_lock);
+	if (strict_strtoul(sysfsbuf, 10, &newkey) < 0
+	    || newkey >= smcreg.key_count)
+		return -EINVAL;
 
+	key_at_index = newkey;
 	return count;
 }
 
@@ -1035,387 +991,102 @@ static struct led_classdev applesmc_backlight = {
 	.brightness_set		= applesmc_brightness_set,
 };
 
-static DEVICE_ATTR(name, 0444, applesmc_name_show, NULL);
-
-static DEVICE_ATTR(position, 0444, applesmc_position_show, NULL);
-static DEVICE_ATTR(calibrate, 0644,
-			applesmc_calibrate_show, applesmc_calibrate_store);
-
-static struct attribute *accelerometer_attributes[] = {
-	&dev_attr_position.attr,
-	&dev_attr_calibrate.attr,
-	NULL
-};
-
-static const struct attribute_group accelerometer_attributes_group =
-	{ .attrs = accelerometer_attributes };
-
-static DEVICE_ATTR(light, 0444, applesmc_light_show, NULL);
-
-static DEVICE_ATTR(key_count, 0444, applesmc_key_count_show, NULL);
-static DEVICE_ATTR(key_at_index, 0644,
-		applesmc_key_at_index_show, applesmc_key_at_index_store);
-static DEVICE_ATTR(key_at_index_name, 0444,
-					applesmc_key_at_index_name_show, NULL);
-static DEVICE_ATTR(key_at_index_type, 0444,
-					applesmc_key_at_index_type_show, NULL);
-static DEVICE_ATTR(key_at_index_data_length, 0444,
-				applesmc_key_at_index_data_length_show, NULL);
-static DEVICE_ATTR(key_at_index_data, 0444,
-				applesmc_key_at_index_read_show, NULL);
-
-static struct attribute *key_enumeration_attributes[] = {
-	&dev_attr_key_count.attr,
-	&dev_attr_key_at_index.attr,
-	&dev_attr_key_at_index_name.attr,
-	&dev_attr_key_at_index_type.attr,
-	&dev_attr_key_at_index_data_length.attr,
-	&dev_attr_key_at_index_data.attr,
-	NULL
-};
-
-static const struct attribute_group key_enumeration_group =
-	{ .attrs = key_enumeration_attributes };
-
-/*
- * Macro defining SENSOR_DEVICE_ATTR for a fan sysfs entries.
- *  - show actual speed
- *  - show/store minimum speed
- *  - show maximum speed
- *  - show safe speed
- *  - show/store target speed
- *  - show/store manual mode
- */
-#define sysfs_fan_speeds_offset(offset) \
-static SENSOR_DEVICE_ATTR_2(fan##offset##_input, S_IRUGO, \
-			applesmc_show_fan_speed, NULL, 0, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_min, S_IRUGO | S_IWUSR, \
-	applesmc_show_fan_speed, applesmc_store_fan_speed, 1, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_max, S_IRUGO, \
-			applesmc_show_fan_speed, NULL, 2, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_safe, S_IRUGO, \
-			applesmc_show_fan_speed, NULL, 3, offset-1); \
-\
-static SENSOR_DEVICE_ATTR_2(fan##offset##_output, S_IRUGO | S_IWUSR, \
-	applesmc_show_fan_speed, applesmc_store_fan_speed, 4, offset-1); \
-\
-static SENSOR_DEVICE_ATTR(fan##offset##_manual, S_IRUGO | S_IWUSR, \
-	applesmc_show_fan_manual, applesmc_store_fan_manual, offset-1); \
-\
-static SENSOR_DEVICE_ATTR(fan##offset##_label, S_IRUGO, \
-	applesmc_show_fan_position, NULL, offset-1); \
-\
-static struct attribute *fan##offset##_attributes[] = { \
-	&sensor_dev_attr_fan##offset##_input.dev_attr.attr, \
-	&sensor_dev_attr_fan##offset##_min.dev_attr.attr, \
-	&sensor_dev_attr_fan##offset##_max.dev_attr.attr, \
-	&sensor_dev_attr_fan##offset##_safe.dev_attr.attr, \
-	&sensor_dev_attr_fan##offset##_output.dev_attr.attr, \
-	&sensor_dev_attr_fan##offset##_manual.dev_attr.attr, \
-	&sensor_dev_attr_fan##offset##_label.dev_attr.attr, \
-	NULL \
+static struct applesmc_node_group info_group[] = {
+	{ "name", applesmc_name_show },
+	{ "key_count", applesmc_key_count_show },
+	{ "key_at_index", applesmc_key_at_index_show, applesmc_key_at_index_store },
+	{ "key_at_index_name", applesmc_key_at_index_name_show },
+	{ "key_at_index_type", applesmc_key_at_index_type_show },
+	{ "key_at_index_data_length", applesmc_key_at_index_data_length_show },
+	{ "key_at_index_data", applesmc_key_at_index_read_show },
+	{ }
 };
 
-/*
- * Create the needed functions for each fan using the macro defined above
- * (4 fans are supported)
- */
-sysfs_fan_speeds_offset(1);
-sysfs_fan_speeds_offset(2);
-sysfs_fan_speeds_offset(3);
-sysfs_fan_speeds_offset(4);
-
-static const struct attribute_group fan_attribute_groups[] = {
-	{ .attrs = fan1_attributes },
-	{ .attrs = fan2_attributes },
-	{ .attrs = fan3_attributes },
-	{ .attrs = fan4_attributes },
+static struct applesmc_node_group accelerometer_group[] = {
+	{ "position", applesmc_position_show },
+	{ "calibrate", applesmc_calibrate_show, applesmc_calibrate_store },
+	{ }
 };
 
-/*
- * Temperature sensors sysfs entries.
- */
-static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 7);
-static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 8);
-static SENSOR_DEVICE_ATTR(temp10_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 9);
-static SENSOR_DEVICE_ATTR(temp11_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 10);
-static SENSOR_DEVICE_ATTR(temp12_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 11);
-static SENSOR_DEVICE_ATTR(temp13_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 12);
-static SENSOR_DEVICE_ATTR(temp14_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 13);
-static SENSOR_DEVICE_ATTR(temp15_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 14);
-static SENSOR_DEVICE_ATTR(temp16_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 15);
-static SENSOR_DEVICE_ATTR(temp17_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 16);
-static SENSOR_DEVICE_ATTR(temp18_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 17);
-static SENSOR_DEVICE_ATTR(temp19_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 18);
-static SENSOR_DEVICE_ATTR(temp20_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 19);
-static SENSOR_DEVICE_ATTR(temp21_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 20);
-static SENSOR_DEVICE_ATTR(temp22_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 21);
-static SENSOR_DEVICE_ATTR(temp23_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 22);
-static SENSOR_DEVICE_ATTR(temp24_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 23);
-static SENSOR_DEVICE_ATTR(temp25_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 24);
-static SENSOR_DEVICE_ATTR(temp26_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 25);
-static SENSOR_DEVICE_ATTR(temp27_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 26);
-static SENSOR_DEVICE_ATTR(temp28_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 27);
-static SENSOR_DEVICE_ATTR(temp29_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 28);
-static SENSOR_DEVICE_ATTR(temp30_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 29);
-static SENSOR_DEVICE_ATTR(temp31_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 30);
-static SENSOR_DEVICE_ATTR(temp32_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 31);
-static SENSOR_DEVICE_ATTR(temp33_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 32);
-static SENSOR_DEVICE_ATTR(temp34_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 33);
-static SENSOR_DEVICE_ATTR(temp35_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 34);
-static SENSOR_DEVICE_ATTR(temp36_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 35);
-static SENSOR_DEVICE_ATTR(temp37_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 36);
-static SENSOR_DEVICE_ATTR(temp38_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 37);
-static SENSOR_DEVICE_ATTR(temp39_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 38);
-static SENSOR_DEVICE_ATTR(temp40_label, S_IRUGO,
-					applesmc_show_sensor_label, NULL, 39);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 7);
-static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 8);
-static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 9);
-static SENSOR_DEVICE_ATTR(temp11_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 10);
-static SENSOR_DEVICE_ATTR(temp12_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 11);
-static SENSOR_DEVICE_ATTR(temp13_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 12);
-static SENSOR_DEVICE_ATTR(temp14_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 13);
-static SENSOR_DEVICE_ATTR(temp15_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 14);
-static SENSOR_DEVICE_ATTR(temp16_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 15);
-static SENSOR_DEVICE_ATTR(temp17_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 16);
-static SENSOR_DEVICE_ATTR(temp18_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 17);
-static SENSOR_DEVICE_ATTR(temp19_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 18);
-static SENSOR_DEVICE_ATTR(temp20_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 19);
-static SENSOR_DEVICE_ATTR(temp21_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 20);
-static SENSOR_DEVICE_ATTR(temp22_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 21);
-static SENSOR_DEVICE_ATTR(temp23_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 22);
-static SENSOR_DEVICE_ATTR(temp24_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 23);
-static SENSOR_DEVICE_ATTR(temp25_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 24);
-static SENSOR_DEVICE_ATTR(temp26_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 25);
-static SENSOR_DEVICE_ATTR(temp27_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 26);
-static SENSOR_DEVICE_ATTR(temp28_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 27);
-static SENSOR_DEVICE_ATTR(temp29_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 28);
-static SENSOR_DEVICE_ATTR(temp30_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 29);
-static SENSOR_DEVICE_ATTR(temp31_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 30);
-static SENSOR_DEVICE_ATTR(temp32_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 31);
-static SENSOR_DEVICE_ATTR(temp33_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 32);
-static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 33);
-static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 34);
-static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 35);
-static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 36);
-static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 37);
-static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 38);
-static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO,
-					applesmc_show_temperature, NULL, 39);
-
-static struct attribute *label_attributes[] = {
-	&sensor_dev_attr_temp1_label.dev_attr.attr,
-	&sensor_dev_attr_temp2_label.dev_attr.attr,
-	&sensor_dev_attr_temp3_label.dev_attr.attr,
-	&sensor_dev_attr_temp4_label.dev_attr.attr,
-	&sensor_dev_attr_temp5_label.dev_attr.attr,
-	&sensor_dev_attr_temp6_label.dev_attr.attr,
-	&sensor_dev_attr_temp7_label.dev_attr.attr,
-	&sensor_dev_attr_temp8_label.dev_attr.attr,
-	&sensor_dev_attr_temp9_label.dev_attr.attr,
-	&sensor_dev_attr_temp10_label.dev_attr.attr,
-	&sensor_dev_attr_temp11_label.dev_attr.attr,
-	&sensor_dev_attr_temp12_label.dev_attr.attr,
-	&sensor_dev_attr_temp13_label.dev_attr.attr,
-	&sensor_dev_attr_temp14_label.dev_attr.attr,
-	&sensor_dev_attr_temp15_label.dev_attr.attr,
-	&sensor_dev_attr_temp16_label.dev_attr.attr,
-	&sensor_dev_attr_temp17_label.dev_attr.attr,
-	&sensor_dev_attr_temp18_label.dev_attr.attr,
-	&sensor_dev_attr_temp19_label.dev_attr.attr,
-	&sensor_dev_attr_temp20_label.dev_attr.attr,
-	&sensor_dev_attr_temp21_label.dev_attr.attr,
-	&sensor_dev_attr_temp22_label.dev_attr.attr,
-	&sensor_dev_attr_temp23_label.dev_attr.attr,
-	&sensor_dev_attr_temp24_label.dev_attr.attr,
-	&sensor_dev_attr_temp25_label.dev_attr.attr,
-	&sensor_dev_attr_temp26_label.dev_attr.attr,
-	&sensor_dev_attr_temp27_label.dev_attr.attr,
-	&sensor_dev_attr_temp28_label.dev_attr.attr,
-	&sensor_dev_attr_temp29_label.dev_attr.attr,
-	&sensor_dev_attr_temp30_label.dev_attr.attr,
-	&sensor_dev_attr_temp31_label.dev_attr.attr,
-	&sensor_dev_attr_temp32_label.dev_attr.attr,
-	&sensor_dev_attr_temp33_label.dev_attr.attr,
-	&sensor_dev_attr_temp34_label.dev_attr.attr,
-	&sensor_dev_attr_temp35_label.dev_attr.attr,
-	&sensor_dev_attr_temp36_label.dev_attr.attr,
-	&sensor_dev_attr_temp37_label.dev_attr.attr,
-	&sensor_dev_attr_temp38_label.dev_attr.attr,
-	&sensor_dev_attr_temp39_label.dev_attr.attr,
-	&sensor_dev_attr_temp40_label.dev_attr.attr,
-	NULL
+static struct applesmc_node_group light_sensor_group[] = {
+	{ "light", applesmc_light_show },
+	{ }
 };
 
-static struct attribute *temperature_attributes[] = {
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp2_input.dev_attr.attr,
-	&sensor_dev_attr_temp3_input.dev_attr.attr,
-	&sensor_dev_attr_temp4_input.dev_attr.attr,
-	&sensor_dev_attr_temp5_input.dev_attr.attr,
-	&sensor_dev_attr_temp6_input.dev_attr.attr,
-	&sensor_dev_attr_temp7_input.dev_attr.attr,
-	&sensor_dev_attr_temp8_input.dev_attr.attr,
-	&sensor_dev_attr_temp9_input.dev_attr.attr,
-	&sensor_dev_attr_temp10_input.dev_attr.attr,
-	&sensor_dev_attr_temp11_input.dev_attr.attr,
-	&sensor_dev_attr_temp12_input.dev_attr.attr,
-	&sensor_dev_attr_temp13_input.dev_attr.attr,
-	&sensor_dev_attr_temp14_input.dev_attr.attr,
-	&sensor_dev_attr_temp15_input.dev_attr.attr,
-	&sensor_dev_attr_temp16_input.dev_attr.attr,
-	&sensor_dev_attr_temp17_input.dev_attr.attr,
-	&sensor_dev_attr_temp18_input.dev_attr.attr,
-	&sensor_dev_attr_temp19_input.dev_attr.attr,
-	&sensor_dev_attr_temp20_input.dev_attr.attr,
-	&sensor_dev_attr_temp21_input.dev_attr.attr,
-	&sensor_dev_attr_temp22_input.dev_attr.attr,
-	&sensor_dev_attr_temp23_input.dev_attr.attr,
-	&sensor_dev_attr_temp24_input.dev_attr.attr,
-	&sensor_dev_attr_temp25_input.dev_attr.attr,
-	&sensor_dev_attr_temp26_input.dev_attr.attr,
-	&sensor_dev_attr_temp27_input.dev_attr.attr,
-	&sensor_dev_attr_temp28_input.dev_attr.attr,
-	&sensor_dev_attr_temp29_input.dev_attr.attr,
-	&sensor_dev_attr_temp30_input.dev_attr.attr,
-	&sensor_dev_attr_temp31_input.dev_attr.attr,
-	&sensor_dev_attr_temp32_input.dev_attr.attr,
-	&sensor_dev_attr_temp33_input.dev_attr.attr,
-	&sensor_dev_attr_temp34_input.dev_attr.attr,
-	&sensor_dev_attr_temp35_input.dev_attr.attr,
-	&sensor_dev_attr_temp36_input.dev_attr.attr,
-	&sensor_dev_attr_temp37_input.dev_attr.attr,
-	&sensor_dev_attr_temp38_input.dev_attr.attr,
-	&sensor_dev_attr_temp39_input.dev_attr.attr,
-	&sensor_dev_attr_temp40_input.dev_attr.attr,
-	NULL
+static struct applesmc_node_group fan_group[] = {
+	{ "fan%d_label", applesmc_show_fan_position },
+	{ "fan%d_input", applesmc_show_fan_speed, NULL, 0 },
+	{ "fan%d_min", applesmc_show_fan_speed, applesmc_store_fan_speed, 1 },
+	{ "fan%d_max", applesmc_show_fan_speed, NULL, 2 },
+	{ "fan%d_safe", applesmc_show_fan_speed, NULL, 3 },
+	{ "fan%d_output", applesmc_show_fan_speed, applesmc_store_fan_speed, 4 },
+	{ "fan%d_manual", applesmc_show_fan_manual, applesmc_store_fan_manual },
+	{ }
 };
 
-static const struct attribute_group temperature_attributes_group =
-	{ .attrs = temperature_attributes };
-
-static const struct attribute_group label_attributes_group = {
-	.attrs = label_attributes
+static struct applesmc_node_group temp_group[] = {
+	{ "temp%d_label", applesmc_show_sensor_label },
+	{ "temp%d_input", applesmc_show_temperature },
+	{ }
 };
 
 /* Module stuff */
 
 /*
- * applesmc_dmi_match - found a match.  return one, short-circuiting the hunt.
+ * applesmc_destroy_nodes - remove files and free associated memory
  */
-static int applesmc_dmi_match(const struct dmi_system_id *id)
+static void applesmc_destroy_nodes(struct applesmc_node_group *groups)
 {
-	int i = 0;
-	struct dmi_match_data* dmi_data = id->driver_data;
-	printk(KERN_INFO "applesmc: %s detected:\n", id->ident);
-	applesmc_accelerometer = dmi_data->accelerometer;
-	printk(KERN_INFO "applesmc:  - Model %s accelerometer\n",
-				applesmc_accelerometer ? "with" : "without");
-	applesmc_light = dmi_data->light;
-	printk(KERN_INFO "applesmc:  - Model %s light sensors and backlight\n",
-					applesmc_light ? "with" : "without");
-
-	applesmc_temperature_set =  dmi_data->temperature_set;
-	while (temperature_sensors_sets[applesmc_temperature_set][i] != NULL)
-		i++;
-	printk(KERN_INFO "applesmc:  - Model with %d temperature sensors\n", i);
-	return 1;
+	struct applesmc_node_group *grp;
+	struct applesmc_dev_attr *node;
+
+	for (grp = groups; grp->nodes; grp++) {
+		for (node = grp->nodes; node->sda.dev_attr.attr.name; node++)
+			sysfs_remove_file(&pdev->dev.kobj,
+					  &node->sda.dev_attr.attr);
+		kfree(grp->nodes);
+		grp->nodes = NULL;
+	}
+}
+
+/*
+ * applesmc_create_nodes - create a two-dimensional group of sysfs files
+ */
+static int applesmc_create_nodes(struct applesmc_node_group *groups, int num)
+{
+	struct applesmc_node_group *grp;
+	struct applesmc_dev_attr *node;
+	struct attribute *attr;
+	int ret, i;
+
+	for (grp = groups; grp->format; grp++) {
+		grp->nodes = kcalloc(num + 1, sizeof(*node), GFP_KERNEL);
+		if (!grp->nodes) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		for (i = 0; i < num; i++) {
+			node = &grp->nodes[i];
+			sprintf(node->name, grp->format, i + 1);
+			node->sda.index = (grp->option << 16) | (i & 0xffff);
+			node->sda.dev_attr.show = grp->show;
+			node->sda.dev_attr.store = grp->store;
+			attr = &node->sda.dev_attr.attr;
+			sysfs_attr_init(attr);
+			attr->name = node->name;
+			attr->mode = S_IRUGO | (grp->store ? S_IWUSR : 0);
+			ret = sysfs_create_file(&pdev->dev.kobj, attr);
+			if (ret) {
+				attr->name = NULL;
+				goto out;
+			}
+		}
+	}
+
+	return 0;
+out:
+	applesmc_destroy_nodes(groups);
+	return ret;
 }
 
 /* Create accelerometer ressources */
@@ -1424,8 +1095,10 @@ static int applesmc_create_accelerometer(void)
 	struct input_dev *idev;
 	int ret;
 
-	ret = sysfs_create_group(&pdev->dev.kobj,
-					&accelerometer_attributes_group);
+	if (!smcreg.has_accelerometer)
+		return 0;
+
+	ret = applesmc_create_nodes(accelerometer_group, 1);
 	if (ret)
 		goto out;
 
@@ -1462,184 +1135,96 @@ out_idev:
 	input_free_polled_device(applesmc_idev);
 
 out_sysfs:
-	sysfs_remove_group(&pdev->dev.kobj, &accelerometer_attributes_group);
+	applesmc_destroy_nodes(accelerometer_group);
 
 out:
-	printk(KERN_WARNING "applesmc: driver init failed (ret=%d)!\n", ret);
+	pr_warn("driver init failed (ret=%d)!\n", ret);
 	return ret;
 }
 
 /* Release all ressources used by the accelerometer */
 static void applesmc_release_accelerometer(void)
 {
+	if (!smcreg.has_accelerometer)
+		return;
 	input_unregister_polled_device(applesmc_idev);
 	input_free_polled_device(applesmc_idev);
-	sysfs_remove_group(&pdev->dev.kobj, &accelerometer_attributes_group);
+	applesmc_destroy_nodes(accelerometer_group);
 }
 
-static __initdata struct dmi_match_data applesmc_dmi_data[] = {
-/* MacBook Pro: accelerometer, backlight and temperature set 0 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 0 },
-/* MacBook2: accelerometer and temperature set 1 */
-	{ .accelerometer = 1, .light = 0, .temperature_set = 1 },
-/* MacBook: accelerometer and temperature set 2 */
-	{ .accelerometer = 1, .light = 0, .temperature_set = 2 },
-/* MacMini: temperature set 3 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
-/* MacPro: temperature set 4 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
-/* iMac: temperature set 5 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 5 },
-/* MacBook3, MacBook4: accelerometer and temperature set 6 */
-	{ .accelerometer = 1, .light = 0, .temperature_set = 6 },
-/* MacBook Air: accelerometer, backlight and temperature set 7 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 7 },
-/* MacBook Pro 4: accelerometer, backlight and temperature set 8 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 8 },
-/* MacBook Pro 3: accelerometer, backlight and temperature set 9 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 9 },
-/* iMac 5: light sensor only, temperature set 10 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 10 },
-/* MacBook 5: accelerometer, backlight and temperature set 11 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 11 },
-/* MacBook Pro 5: accelerometer, backlight and temperature set 12 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 12 },
-/* iMac 8: light sensor only, temperature set 13 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 13 },
-/* iMac 6: light sensor only, temperature set 14 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 14 },
-/* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 15 },
-/* MacPro3,1: temperature set 16 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 16 },
-/* iMac 9,1: light sensor only, temperature set 17 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 17 },
-/* MacBook Pro 2,2: accelerometer, backlight and temperature set 18 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 18 },
-/* MacBook Pro 5,3: accelerometer, backlight and temperature set 19 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 19 },
-/* MacBook Pro 5,4: accelerometer, backlight and temperature set 20 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 20 },
-/* MacBook Pro 6,2: accelerometer, backlight and temperature set 21 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 21 },
-/* MacBook Pro 7,1: accelerometer, backlight and temperature set 22 */
-	{ .accelerometer = 1, .light = 1, .temperature_set = 22 },
-};
+static int applesmc_create_light_sensor(void)
+{
+	if (!smcreg.num_light_sensors)
+		return 0;
+	return applesmc_create_nodes(light_sensor_group, 1);
+}
+
+static void applesmc_release_light_sensor(void)
+{
+	if (!smcreg.num_light_sensors)
+		return;
+	applesmc_destroy_nodes(light_sensor_group);
+}
+
+static int applesmc_create_key_backlight(void)
+{
+	if (!smcreg.has_key_backlight)
+		return 0;
+	applesmc_led_wq = create_singlethread_workqueue("applesmc-led");
+	if (!applesmc_led_wq)
+		return -ENOMEM;
+	return led_classdev_register(&pdev->dev, &applesmc_backlight);
+}
+
+static void applesmc_release_key_backlight(void)
+{
+	if (!smcreg.has_key_backlight)
+		return;
+	led_classdev_unregister(&applesmc_backlight);
+	destroy_workqueue(applesmc_led_wq);
+}
+
+static int applesmc_dmi_match(const struct dmi_system_id *id)
+{
+	return 1;
+}
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
  * So we need to put "Apple MacBook Pro" before "Apple MacBook". */
 static __initdata struct dmi_system_id applesmc_whitelist[] = {
-	{ applesmc_dmi_match, "Apple MacBook Air 2", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir2") },
-		&applesmc_dmi_data[15]},
 	{ applesmc_dmi_match, "Apple MacBook Air", {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir") },
-		&applesmc_dmi_data[7]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 7", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro7") },
-		&applesmc_dmi_data[22]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 5,4", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,4") },
-		&applesmc_dmi_data[20]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 5,3", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,3") },
-		&applesmc_dmi_data[19]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 6", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro6") },
-		&applesmc_dmi_data[21]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 5", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5") },
-		&applesmc_dmi_data[12]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 4", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro4") },
-		&applesmc_dmi_data[8]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 3", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
-		&applesmc_dmi_data[9]},
-	{ applesmc_dmi_match, "Apple MacBook Pro 2,2", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
-		&applesmc_dmi_data[18]},
+	},
 	{ applesmc_dmi_match, "Apple MacBook Pro", {
-	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
-		&applesmc_dmi_data[0]},
-	{ applesmc_dmi_match, "Apple MacBook (v2)", {
-	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
-		&applesmc_dmi_data[1]},
-	{ applesmc_dmi_match, "Apple MacBook (v3)", {
-	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
-		&applesmc_dmi_data[6]},
-	{ applesmc_dmi_match, "Apple MacBook 4", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") },
-		&applesmc_dmi_data[6]},
-	{ applesmc_dmi_match, "Apple MacBook 5", {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") },
-		&applesmc_dmi_data[11]},
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro") },
+	},
 	{ applesmc_dmi_match, "Apple MacBook", {
-	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
-		&applesmc_dmi_data[2]},
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "MacBook") },
+	},
 	{ applesmc_dmi_match, "Apple Macmini", {
-	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") },
-		&applesmc_dmi_data[3]},
-	{ applesmc_dmi_match, "Apple MacPro2", {
-	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
-		&applesmc_dmi_data[4]},
-	{ applesmc_dmi_match, "Apple MacPro3", {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") },
-		&applesmc_dmi_data[16]},
+	  DMI_MATCH(DMI_PRODUCT_NAME, "Macmini") },
+	},
 	{ applesmc_dmi_match, "Apple MacPro", {
 	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
-		&applesmc_dmi_data[4]},
-	{ applesmc_dmi_match, "Apple iMac 9,1", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
-		&applesmc_dmi_data[17]},
-	{ applesmc_dmi_match, "Apple iMac 8", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
-		&applesmc_dmi_data[13]},
-	{ applesmc_dmi_match, "Apple iMac 6", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "iMac6") },
-		&applesmc_dmi_data[14]},
-	{ applesmc_dmi_match, "Apple iMac 5", {
-	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME, "iMac5") },
-		&applesmc_dmi_data[10]},
+	},
 	{ applesmc_dmi_match, "Apple iMac", {
-	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
-		&applesmc_dmi_data[5]},
+	  DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME, "iMac") },
+	},
 	{ .ident = NULL }
 };
 
 static int __init applesmc_init(void)
 {
 	int ret;
-	int count;
-	int i;
 
 	if (!dmi_check_system(applesmc_whitelist)) {
-		printk(KERN_WARNING "applesmc: supported laptop not found!\n");
+		pr_warn("supported laptop not found!\n");
 		ret = -ENODEV;
 		goto out;
 	}
@@ -1661,83 +1246,34 @@ static int __init applesmc_init(void)
 		goto out_driver;
 	}
 
-	ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_name.attr);
+	/* create register cache */
+	ret = applesmc_init_smcreg();
 	if (ret)
 		goto out_device;
 
-	/* Create key enumeration sysfs files */
-	ret = sysfs_create_group(&pdev->dev.kobj, &key_enumeration_group);
+	ret = applesmc_create_nodes(info_group, 1);
 	if (ret)
-		goto out_name;
-
-	/* create fan files */
-	count = applesmc_get_fan_count();
-	if (count < 0)
-		printk(KERN_ERR "applesmc: Cannot get the number of fans.\n");
-	else
-		printk(KERN_INFO "applesmc: %d fans found.\n", count);
+		goto out_smcreg;
 
-	if (count > 4) {
-		count = 4;
-		printk(KERN_WARNING "applesmc: More than 4 fans found,"
-		       " but at most 4 fans are supported"
-		       " by the driver.\n");
-	}
-
-	while (fans_handled < count) {
-		ret = sysfs_create_group(&pdev->dev.kobj,
-					 &fan_attribute_groups[fans_handled]);
-		if (ret)
-			goto out_fans;
-		fans_handled++;
-	}
-
-	for (i = 0;
-	     temperature_sensors_sets[applesmc_temperature_set][i] != NULL;
-	     i++) {
-		if (temperature_attributes[i] == NULL ||
-		    label_attributes[i] == NULL) {
-			printk(KERN_ERR "applesmc: More temperature sensors "
-				"in temperature_sensors_sets (at least %i)"
-				"than available sysfs files in "
-				"temperature_attributes (%i), please report "
-				"this bug.\n", i, i-1);
-			goto out_temperature;
-		}
-		ret = sysfs_create_file(&pdev->dev.kobj,
-						temperature_attributes[i]);
-		if (ret)
-			goto out_temperature;
-		ret = sysfs_create_file(&pdev->dev.kobj,
-						label_attributes[i]);
-		if (ret)
-			goto out_temperature;
-	}
+	ret = applesmc_create_nodes(fan_group, smcreg.fan_count);
+	if (ret)
+		goto out_info;
 
-	if (applesmc_accelerometer) {
-		ret = applesmc_create_accelerometer();
-		if (ret)
-			goto out_temperature;
-	}
+	ret = applesmc_create_nodes(temp_group, smcreg.temp_count);
+	if (ret)
+		goto out_fans;
 
-	if (applesmc_light) {
-		/* Add light sensor file */
-		ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_light.attr);
-		if (ret)
-			goto out_accelerometer;
+	ret = applesmc_create_accelerometer();
+	if (ret)
+		goto out_temperature;
 
-		/* Create the workqueue */
-		applesmc_led_wq = create_singlethread_workqueue("applesmc-led");
-		if (!applesmc_led_wq) {
-			ret = -ENOMEM;
-			goto out_light_sysfs;
-		}
+	ret = applesmc_create_light_sensor();
+	if (ret)
+		goto out_accelerometer;
 
-		/* register as a led device */
-		ret = led_classdev_register(&pdev->dev, &applesmc_backlight);
-		if (ret < 0)
-			goto out_light_wq;
-	}
+	ret = applesmc_create_key_backlight();
+	if (ret)
+		goto out_light_sysfs;
 
 	hwmon_dev = hwmon_device_register(&pdev->dev);
 	if (IS_ERR(hwmon_dev)) {
@@ -1745,32 +1281,22 @@ static int __init applesmc_init(void)
 		goto out_light_ledclass;
 	}
 
-	printk(KERN_INFO "applesmc: driver successfully loaded.\n");
-
 	return 0;
 
 out_light_ledclass:
-	if (applesmc_light)
-		led_classdev_unregister(&applesmc_backlight);
-out_light_wq:
-	if (applesmc_light)
-		destroy_workqueue(applesmc_led_wq);
+	applesmc_release_key_backlight();
 out_light_sysfs:
-	if (applesmc_light)
-		sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr);
+	applesmc_release_light_sensor();
 out_accelerometer:
-	if (applesmc_accelerometer)
-		applesmc_release_accelerometer();
+	applesmc_release_accelerometer();
 out_temperature:
-	sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
-	sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
+	applesmc_destroy_nodes(temp_group);
 out_fans:
-	while (fans_handled)
-		sysfs_remove_group(&pdev->dev.kobj,
-				   &fan_attribute_groups[--fans_handled]);
-	sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group);
-out_name:
-	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr);
+	applesmc_destroy_nodes(fan_group);
+out_info:
+	applesmc_destroy_nodes(info_group);
+out_smcreg:
+	applesmc_destroy_smcreg();
 out_device:
 	platform_device_unregister(pdev);
 out_driver:
@@ -1778,32 +1304,23 @@ out_driver:
 out_region:
 	release_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS);
 out:
-	printk(KERN_WARNING "applesmc: driver init failed (ret=%d)!\n", ret);
+	pr_warn("driver init failed (ret=%d)!\n", ret);
 	return ret;
 }
 
 static void __exit applesmc_exit(void)
 {
 	hwmon_device_unregister(hwmon_dev);
-	if (applesmc_light) {
-		led_classdev_unregister(&applesmc_backlight);
-		destroy_workqueue(applesmc_led_wq);
-		sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr);
-	}
-	if (applesmc_accelerometer)
-		applesmc_release_accelerometer();
-	sysfs_remove_group(&pdev->dev.kobj, &label_attributes_group);
-	sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group);
-	while (fans_handled)
-		sysfs_remove_group(&pdev->dev.kobj,
-				   &fan_attribute_groups[--fans_handled]);
-	sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group);
-	sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr);
+	applesmc_release_key_backlight();
+	applesmc_release_light_sensor();
+	applesmc_release_accelerometer();
+	applesmc_destroy_nodes(temp_group);
+	applesmc_destroy_nodes(fan_group);
+	applesmc_destroy_nodes(info_group);
+	applesmc_destroy_smcreg();
 	platform_device_unregister(pdev);
 	platform_driver_unregister(&applesmc_driver);
 	release_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS);
-
-	printk(KERN_INFO "applesmc: driver unloaded.\n");
 }
 
 module_init(applesmc_init);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 7dada559b3a1..c02a052d3085 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -36,6 +36,8 @@
     asb100	7	3	1	4	0x31	0x0694	yes	no
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
@@ -701,8 +703,7 @@ static int asb100_detect(struct i2c_client *client,
 	int val1, val2;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		pr_debug("asb100.o: detect failed, "
-				"smbus byte data not supported!\n");
+		pr_debug("detect failed, smbus byte data not supported!\n");
 		return -ENODEV;
 	}
 
@@ -715,7 +716,7 @@ static int asb100_detect(struct i2c_client *client,
 			(((!(val1 & 0x80)) && (val2 != 0x94)) ||
 			/* Check for ASB100 ID (high byte ) */
 			((val1 & 0x80) && (val2 != 0x06)))) {
-		pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2);
+		pr_debug("detect failed, bad chip id 0x%02x!\n", val2);
 		return -ENODEV;
 	}
 
@@ -744,7 +745,7 @@ static int asb100_probe(struct i2c_client *client,
 
 	data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL);
 	if (!data) {
-		pr_debug("asb100.o: probe failed, kzalloc failed!\n");
+		pr_debug("probe failed, kzalloc failed!\n");
 		err = -ENOMEM;
 		goto ERROR0;
 	}
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 23b8555215d2..b5e892017e0c 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -5,12 +5,15 @@
  * See COPYING in the top level directory of the kernel tree.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/hwmon.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 
 #include <acpi/acpi.h>
 #include <acpi/acpixf.h>
@@ -20,6 +23,21 @@
 
 #define ATK_HID "ATK0110"
 
+static bool new_if;
+module_param(new_if, bool, 0);
+MODULE_PARM_DESC(new_if, "Override detection heuristic and force the use of the new ATK0110 interface");
+
+static const struct dmi_system_id __initconst atk_force_new_if[] = {
+	{
+		/* Old interface has broken MCH temp monitoring */
+		.ident = "Asus Sabertooth X58",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "SABERTOOTH X58")
+		}
+	},
+	{ }
+};
+
 /* Minimum time between readings, enforced in order to avoid
  * hogging the CPU.
  */
@@ -1300,7 +1318,9 @@ static int atk_probe_if(struct atk_data *data)
 	 * analysis of multiple DSDTs indicates that when both interfaces
 	 * are present the new one (GGRP/GITM) is not functional.
 	 */
-	if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle)
+	if (new_if)
+		dev_info(dev, "Overriding interface detection\n");
+	if (data->rtmp_handle && data->rvlt_handle && data->rfan_handle && !new_if)
 		data->old_interface = true;
 	else if (data->enumerate_handle && data->read_handle &&
 			data->write_handle)
@@ -1414,14 +1434,16 @@ static int __init atk0110_init(void)
 
 	/* Make sure it's safe to access the device through ACPI */
 	if (!acpi_resources_are_enforced()) {
-		pr_err("atk: Resources not safely usable due to "
-		       "acpi_enforce_resources kernel parameter\n");
+		pr_err("Resources not safely usable due to acpi_enforce_resources kernel parameter\n");
 		return -EBUSY;
 	}
 
+	if (dmi_check_system(atk_force_new_if))
+		new_if = true;
+
 	ret = acpi_bus_register_driver(&atk_driver);
 	if (ret)
-		pr_info("atk: acpi_bus_register_driver failed: %d\n", ret);
+		pr_info("acpi_bus_register_driver failed: %d\n", ret);
 
 	return ret;
 }
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 42de98d73ff5..194ca0aa8b0c 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -20,6 +20,8 @@
  * 02110-1301 USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -445,8 +447,8 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 	 * without thermal sensors will be filtered out.
 	 */
 	if (!cpu_has(c, X86_FEATURE_DTS)) {
-		printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
-		       " has no thermal sensor.\n", c->x86_model);
+		pr_info("CPU (model=0x%x) has no thermal sensor\n",
+			c->x86_model);
 		return 0;
 	}
 
@@ -466,7 +468,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 	pdev = platform_device_alloc(DRVNAME, cpu);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
@@ -478,8 +480,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_free;
 	}
 
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 980c17d5eeae..d9c592713919 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -25,6 +25,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -75,12 +77,14 @@ enum chips { dme1737, sch5027, sch311x, sch5127 };
  * in4   +12V
  * in5   VTR   (+3.3V stby)
  * in6   Vbat
+ * in7   Vtrip (sch5127 only)
  *
  * --------------------------------------------------------------------- */
 
-/* Voltages (in) numbered 0-6 (ix) */
-#define	DME1737_REG_IN(ix)		((ix) < 5 ? 0x20 + (ix) \
-						  : 0x94 + (ix))
+/* Voltages (in) numbered 0-7 (ix) */
+#define	DME1737_REG_IN(ix)		((ix) < 5 ? 0x20 + (ix) : \
+					 (ix) < 7 ? 0x94 + (ix) : \
+						    0x1f)
 #define	DME1737_REG_IN_MIN(ix)		((ix) < 5 ? 0x44 + (ix) * 2 \
 						  : 0x91 + (ix) * 2)
 #define	DME1737_REG_IN_MAX(ix)		((ix) < 5 ? 0x45 + (ix) * 2 \
@@ -99,10 +103,11 @@ enum chips { dme1737, sch5027, sch311x, sch5127 };
  *    IN_TEMP_LSB(1) = [temp3, temp1]
  *    IN_TEMP_LSB(2) = [in4, temp2]
  *    IN_TEMP_LSB(3) = [in3, in0]
- *    IN_TEMP_LSB(4) = [in2, in1] */
+ *    IN_TEMP_LSB(4) = [in2, in1]
+ *    IN_TEMP_LSB(5) = [res, in7] */
 #define DME1737_REG_IN_TEMP_LSB(ix)	(0x84 + (ix))
-static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0};
-static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4};
+static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5};
+static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4};
 static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
 static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
 
@@ -143,7 +148,7 @@ static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
 #define DME1737_REG_ALARM1		0x41
 #define DME1737_REG_ALARM2		0x42
 #define DME1737_REG_ALARM3		0x83
-static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17};
+static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18};
 static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
 static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
 
@@ -188,6 +193,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
 #define HAS_PWM_MIN		(1 << 4)		/* bit 4 */
 #define HAS_FAN(ix)		(1 << ((ix) + 5))	/* bits 5-10 */
 #define HAS_PWM(ix)		(1 << ((ix) + 11))	/* bits 11-16 */
+#define HAS_IN7			(1 << 17)		/* bit 17 */
 
 /* ---------------------------------------------------------------------
  * Data structures and manipulation thereof
@@ -211,9 +217,9 @@ struct dme1737_data {
 	u32 has_features;
 
 	/* Register values */
-	u16 in[7];
-	u8  in_min[7];
-	u8  in_max[7];
+	u16 in[8];
+	u8  in_min[8];
+	u8  in_max[8];
 	s16 temp[3];
 	s8  temp_min[3];
 	s8  temp_max[3];
@@ -245,7 +251,7 @@ static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
 static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
 					 3300};
 static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300,
-					 3300};
+					 3300, 1500};
 #define IN_NOMINAL(type)	((type) == sch311x ? IN_NOMINAL_SCH311x : \
 				 (type) == sch5027 ? IN_NOMINAL_SCH5027 : \
 				 (type) == sch5127 ? IN_NOMINAL_SCH5127 : \
@@ -578,7 +584,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 {
 	struct dme1737_data *data = dev_get_drvdata(dev);
 	int ix;
-	u8 lsb[5];
+	u8 lsb[6];
 
 	mutex_lock(&data->update_lock);
 
@@ -601,6 +607,9 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 			/* Voltage inputs are stored as 16 bit values even
 			 * though they have only 12 bits resolution. This is
 			 * to make it consistent with the temp inputs. */
+			if (ix == 7 && !(data->has_features & HAS_IN7)) {
+				continue;
+			}
 			data->in[ix] = dme1737_read(data,
 					DME1737_REG_IN(ix)) << 8;
 			data->in_min[ix] = dme1737_read(data,
@@ -633,10 +642,16 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 		 * which the registers are read (MSB first, then LSB) is
 		 * important! */
 		for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
+			if (ix == 5 && !(data->has_features & HAS_IN7)) {
+				continue;
+			}
 			lsb[ix] = dme1737_read(data,
 					DME1737_REG_IN_TEMP_LSB(ix));
 		}
 		for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+			if (ix == 7 && !(data->has_features & HAS_IN7)) {
+				continue;
+			}
 			data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
 					DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
 		}
@@ -760,7 +775,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev)
 
 /* ---------------------------------------------------------------------
  * Voltage sysfs attributes
- * ix = [0-5]
+ * ix = [0-7]
  * --------------------------------------------------------------------- */
 
 #define SYS_IN_INPUT	0
@@ -1437,7 +1452,7 @@ static ssize_t show_name(struct device *dev, struct device_attribute *attr,
  * Sysfs device attribute defines and structs
  * --------------------------------------------------------------------- */
 
-/* Voltages 0-6 */
+/* Voltages 0-7 */
 
 #define SENSOR_DEVICE_ATTR_IN(ix) \
 static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
@@ -1456,6 +1471,7 @@ SENSOR_DEVICE_ATTR_IN(3);
 SENSOR_DEVICE_ATTR_IN(4);
 SENSOR_DEVICE_ATTR_IN(5);
 SENSOR_DEVICE_ATTR_IN(6);
+SENSOR_DEVICE_ATTR_IN(7);
 
 /* Temperatures 1-3 */
 
@@ -1574,7 +1590,7 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);   /* for ISA devices */
  * created unconditionally. The attributes that need modification of their
  * permissions are created read-only and write permissions are added or removed
  * on the fly when required */
-static struct attribute *dme1737_attr[] ={
+static struct attribute *dme1737_attr[] = {
 	/* Voltages */
 	&sensor_dev_attr_in0_input.dev_attr.attr,
 	&sensor_dev_attr_in0_min.dev_attr.attr,
@@ -1679,7 +1695,7 @@ static const struct attribute_group dme1737_zone3_group = {
 };
 
 
-/* The following struct holds temp zone hysteresis  related attributes, which
+/* The following struct holds temp zone hysteresis related attributes, which
  * are not available in all chips. The following chips support them:
  * DME1737, SCH311x */
 static struct attribute *dme1737_zone_hyst_attr[] = {
@@ -1693,6 +1709,21 @@ static const struct attribute_group dme1737_zone_hyst_group = {
 	.attrs = dme1737_zone_hyst_attr,
 };
 
+/* The following struct holds voltage in7 related attributes, which
+ * are not available in all chips. The following chips support them:
+ * SCH5127 */
+static struct attribute *dme1737_in7_attr[] = {
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in7_min.dev_attr.attr,
+	&sensor_dev_attr_in7_max.dev_attr.attr,
+	&sensor_dev_attr_in7_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_in7_group = {
+	.attrs = dme1737_in7_attr,
+};
+
 /* The following structs hold the PWM attributes, some of which are optional.
  * Their creation depends on the chip configuration which is determined during
  * module load. */
@@ -1984,6 +2015,9 @@ static void dme1737_remove_files(struct device *dev)
 	if (data->has_features & HAS_ZONE_HYST) {
 		sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group);
 	}
+	if (data->has_features & HAS_IN7) {
+		sysfs_remove_group(&dev->kobj, &dme1737_in7_group);
+	}
 	sysfs_remove_group(&dev->kobj, &dme1737_group);
 
 	if (!data->client) {
@@ -1997,43 +2031,58 @@ static int dme1737_create_files(struct device *dev)
 	int err, ix;
 
 	/* Create a name attribute for ISA devices */
-	if (!data->client &&
-	    (err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr))) {
-		goto exit;
+	if (!data->client) {
+		err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr);
+		if (err) {
+			goto exit;
+		}
 	}
 
 	/* Create standard sysfs attributes */
-	if ((err = sysfs_create_group(&dev->kobj, &dme1737_group))) {
+	err = sysfs_create_group(&dev->kobj, &dme1737_group);
+	if (err) {
 		goto exit_remove;
 	}
 
 	/* Create chip-dependent sysfs attributes */
-	if ((data->has_features & HAS_TEMP_OFFSET) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_temp_offset_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_TEMP_OFFSET) {
+		err = sysfs_create_group(&dev->kobj,
+					 &dme1737_temp_offset_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
-	if ((data->has_features & HAS_VID) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_vid_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_VID) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_vid_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
-	if ((data->has_features & HAS_ZONE3) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_zone3_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_ZONE3) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_zone3_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
-	if ((data->has_features & HAS_ZONE_HYST) &&
-	    (err = sysfs_create_group(&dev->kobj,
-				      &dme1737_zone_hyst_group))) {
-		goto exit_remove;
+	if (data->has_features & HAS_ZONE_HYST) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_zone_hyst_group);
+		if (err) {
+			goto exit_remove;
+		}
+	}
+	if (data->has_features & HAS_IN7) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_in7_group);
+		if (err) {
+			goto exit_remove;
+		}
 	}
 
 	/* Create fan sysfs attributes */
 	for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
 		if (data->has_features & HAS_FAN(ix)) {
-			if ((err = sysfs_create_group(&dev->kobj,
-						&dme1737_fan_group[ix]))) {
+			err = sysfs_create_group(&dev->kobj,
+						 &dme1737_fan_group[ix]);
+			if (err) {
 				goto exit_remove;
 			}
 		}
@@ -2042,14 +2091,17 @@ static int dme1737_create_files(struct device *dev)
 	/* Create PWM sysfs attributes */
 	for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
 		if (data->has_features & HAS_PWM(ix)) {
-			if ((err = sysfs_create_group(&dev->kobj,
-						&dme1737_pwm_group[ix]))) {
+			err = sysfs_create_group(&dev->kobj,
+						 &dme1737_pwm_group[ix]);
+			if (err) {
 				goto exit_remove;
 			}
-			if ((data->has_features & HAS_PWM_MIN) && ix < 3 &&
-			    (err = sysfs_create_file(&dev->kobj,
-					dme1737_auto_pwm_min_attr[ix]))) {
-				goto exit_remove;
+			if ((data->has_features & HAS_PWM_MIN) && (ix < 3)) {
+				err = sysfs_create_file(&dev->kobj,
+						dme1737_auto_pwm_min_attr[ix]);
+				if (err) {
+					goto exit_remove;
+				}
 			}
 		}
 	}
@@ -2186,7 +2238,7 @@ static int dme1737_init_device(struct device *dev)
 		data->has_features |= HAS_ZONE3;
 		break;
 	case sch5127:
-		data->has_features |= HAS_FAN(2) | HAS_PWM(2);
+		data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7;
 		break;
 	default:
 		break;
@@ -2279,8 +2331,9 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
 	dme1737_sio_outb(sio_cip, 0x07, 0x0a);
 
 	/* Get the base address of the runtime registers */
-	if (!(addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
-		      dme1737_sio_inb(sio_cip, 0x61))) {
+	addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+		dme1737_sio_inb(sio_cip, 0x61);
+	if (!addr) {
 		err = -ENODEV;
 		goto exit;
 	}
@@ -2361,13 +2414,15 @@ static int dme1737_i2c_probe(struct i2c_client *client,
 	mutex_init(&data->update_lock);
 
 	/* Initialize the DME1737 chip */
-	if ((err = dme1737_init_device(dev))) {
+	err = dme1737_init_device(dev);
+	if (err) {
 		dev_err(dev, "Failed to initialize device.\n");
 		goto exit_kfree;
 	}
 
 	/* Create sysfs files */
-	if ((err = dme1737_create_files(dev))) {
+	err = dme1737_create_files(dev);
+	if (err) {
 		dev_err(dev, "Failed to create sysfs files.\n");
 		goto exit_kfree;
 	}
@@ -2444,9 +2499,10 @@ static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr)
 	dme1737_sio_outb(sio_cip, 0x07, 0x0a);
 
 	/* Get the base address of the runtime registers */
-	if (!(base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
-			   dme1737_sio_inb(sio_cip, 0x61))) {
-		printk(KERN_ERR "dme1737: Base address not set.\n");
+	base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+		     dme1737_sio_inb(sio_cip, 0x61);
+	if (!base_addr) {
+		pr_err("Base address not set\n");
 		err = -ENODEV;
 		goto exit;
 	}
@@ -2474,21 +2530,22 @@ static int __init dme1737_isa_device_add(unsigned short addr)
 	if (err)
 		goto exit;
 
-	if (!(pdev = platform_device_alloc("dme1737", addr))) {
-		printk(KERN_ERR "dme1737: Failed to allocate device.\n");
+	pdev = platform_device_alloc("dme1737", addr);
+	if (!pdev) {
+		pr_err("Failed to allocate device\n");
 		err = -ENOMEM;
 		goto exit;
 	}
 
-	if ((err = platform_device_add_resources(pdev, &res, 1))) {
-		printk(KERN_ERR "dme1737: Failed to add device resource "
-		       "(err = %d).\n", err);
+	err = platform_device_add_resources(pdev, &res, 1);
+	if (err) {
+		pr_err("Failed to add device resource (err = %d)\n", err);
 		goto exit_device_put;
 	}
 
-	if ((err = platform_device_add(pdev))) {
-		printk(KERN_ERR "dme1737: Failed to add device (err = %d).\n",
-		       err);
+	err = platform_device_add(pdev);
+	if (err) {
+		pr_err("Failed to add device (err = %d)\n", err);
 		goto exit_device_put;
 	}
 
@@ -2514,11 +2571,12 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
 			(unsigned short)res->start,
 			(unsigned short)res->start + DME1737_EXTENT - 1);
-                err = -EBUSY;
-                goto exit;
-        }
+		err = -EBUSY;
+		goto exit;
+	}
 
-	if (!(data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL))) {
+	data = kzalloc(sizeof(struct dme1737_data), GFP_KERNEL);
+	if (!data) {
 		err = -ENOMEM;
 		goto exit_release_region;
 	}
@@ -2565,13 +2623,15 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev)
 		 data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr);
 
 	/* Initialize the chip */
-	if ((err = dme1737_init_device(dev))) {
+	err = dme1737_init_device(dev);
+	if (err) {
 		dev_err(dev, "Failed to initialize device.\n");
 		goto exit_kfree;
 	}
 
 	/* Create sysfs files */
-	if ((err = dme1737_create_files(dev))) {
+	err = dme1737_create_files(dev);
+	if (err) {
 		dev_err(dev, "Failed to create sysfs files.\n");
 		goto exit_kfree;
 	}
@@ -2628,7 +2688,8 @@ static int __init dme1737_init(void)
 	int err;
 	unsigned short addr;
 
-	if ((err = i2c_add_driver(&dme1737_i2c_driver))) {
+	err = i2c_add_driver(&dme1737_i2c_driver);
+	if (err) {
 		goto exit;
 	}
 
@@ -2641,12 +2702,14 @@ static int __init dme1737_init(void)
 		return 0;
 	}
 
-	if ((err = platform_driver_register(&dme1737_isa_driver))) {
+	err = platform_driver_register(&dme1737_isa_driver);
+	if (err) {
 		goto exit_del_i2c_driver;
 	}
 
 	/* Sets global pdev as a side effect */
-	if ((err = dme1737_isa_device_add(addr))) {
+	err = dme1737_isa_device_add(addr);
+	if (err) {
 		goto exit_del_isa_driver;
 	}
 
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
new file mode 100644
index 000000000000..257957c69d92
--- /dev/null
+++ b/drivers/hwmon/ds620.c
@@ -0,0 +1,337 @@
+/*
+ *  ds620.c - Support for temperature sensor and thermostat DS620
+ *
+ *  Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
+ *
+ *  based on ds1621.c by Christian W. Zuckschwerdt  <zany@triq.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/i2c/ds620.h>
+
+/*
+ * Many DS620 constants specified below
+ *  15   14   13   12   11   10   09    08
+ * |Done|NVB |THF |TLF |R1  |R0  |AUTOC|1SHOT|
+ *
+ *  07   06   05   04   03   02   01    00
+ * |PO2 |PO1 |A2  |A1  |A0  |    |     |     |
+ */
+#define DS620_REG_CONFIG_DONE		0x8000
+#define DS620_REG_CONFIG_NVB		0x4000
+#define DS620_REG_CONFIG_THF		0x2000
+#define DS620_REG_CONFIG_TLF		0x1000
+#define DS620_REG_CONFIG_R1		0x0800
+#define DS620_REG_CONFIG_R0		0x0400
+#define DS620_REG_CONFIG_AUTOC		0x0200
+#define DS620_REG_CONFIG_1SHOT		0x0100
+#define DS620_REG_CONFIG_PO2		0x0080
+#define DS620_REG_CONFIG_PO1		0x0040
+#define DS620_REG_CONFIG_A2		0x0020
+#define DS620_REG_CONFIG_A1		0x0010
+#define DS620_REG_CONFIG_A0		0x0008
+
+/* The DS620 registers */
+static const u8 DS620_REG_TEMP[3] = {
+	0xAA,			/* input, word, RO */
+	0xA2,			/* min, word, RW */
+	0xA0,			/* max, word, RW */
+};
+
+#define DS620_REG_CONF		0xAC	/* word, RW */
+#define DS620_COM_START		0x51	/* no data */
+#define DS620_COM_STOP		0x22	/* no data */
+
+/* Each client has this additional data */
+struct ds620_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	u16 temp[3];		/* Register values, word */
+};
+
+/*
+ *  Temperature registers are word-sized.
+ *  DS620 uses a high-byte first convention, which is exactly opposite to
+ *  the SMBus standard.
+ */
+static int ds620_read_temp(struct i2c_client *client, u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, reg);
+	if (ret < 0)
+		return ret;
+	return swab16(ret);
+}
+
+static int ds620_write_temp(struct i2c_client *client, u8 reg, u16 value)
+{
+	return i2c_smbus_write_word_data(client, reg, swab16(value));
+}
+
+static void ds620_init_client(struct i2c_client *client)
+{
+	struct ds620_platform_data *ds620_info = client->dev.platform_data;
+	u16 conf, new_conf;
+
+	new_conf = conf =
+	    swab16(i2c_smbus_read_word_data(client, DS620_REG_CONF));
+
+	/* switch to continuous conversion mode */
+	new_conf &= ~DS620_REG_CONFIG_1SHOT;
+	/* already high at power-on, but don't trust the BIOS! */
+	new_conf |= DS620_REG_CONFIG_PO2;
+	/* thermostat mode according to platform data */
+	if (ds620_info && ds620_info->pomode == 1)
+		new_conf &= ~DS620_REG_CONFIG_PO1; /* PO_LOW */
+	else if (ds620_info && ds620_info->pomode == 2)
+		new_conf |= DS620_REG_CONFIG_PO1; /* PO_HIGH */
+	else
+		new_conf &= ~DS620_REG_CONFIG_PO2; /* always low */
+	/* with highest precision */
+	new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0;
+
+	if (conf != new_conf)
+		i2c_smbus_write_word_data(client, DS620_REG_CONF,
+					  swab16(new_conf));
+
+	/* start conversion */
+	i2c_smbus_write_byte(client, DS620_COM_START);
+}
+
+static struct ds620_data *ds620_update_client(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds620_data *data = i2c_get_clientdata(client);
+	struct ds620_data *ret = data;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+	    || !data->valid) {
+		int i;
+		int res;
+
+		dev_dbg(&client->dev, "Starting ds620 update\n");
+
+		for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+			res = ds620_read_temp(client,
+					      DS620_REG_TEMP[i]);
+			if (res < 0) {
+				ret = ERR_PTR(res);
+				goto abort;
+			}
+
+			data->temp[i] = res;
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+abort:
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct ds620_data *data = ds620_update_client(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%d\n", ((data->temp[attr->index] / 8) * 625) / 10);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+			const char *buf, size_t count)
+{
+	int res;
+	long val;
+
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ds620_data *data = i2c_get_clientdata(client);
+
+	res = strict_strtol(buf, 10, &val);
+
+	if (res)
+		return res;
+
+	val = (val * 10 / 625) * 8;
+
+	mutex_lock(&data->update_lock);
+	data->temp[attr->index] = val;
+	ds620_write_temp(client, DS620_REG_TEMP[attr->index],
+			 data->temp[attr->index]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct ds620_data *data = ds620_update_client(dev);
+	struct i2c_client *client = to_i2c_client(dev);
+	u16 conf, new_conf;
+	int res;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	/* reset alarms if necessary */
+	res = i2c_smbus_read_word_data(client, DS620_REG_CONF);
+	if (res < 0)
+		return res;
+
+	conf = swab16(res);
+	new_conf = conf;
+	new_conf &= ~attr->index;
+	if (conf != new_conf) {
+		res = i2c_smbus_write_word_data(client, DS620_REG_CONF,
+						swab16(new_conf));
+		if (res < 0)
+			return res;
+	}
+
+	return sprintf(buf, "%d\n", !!(conf & attr->index));
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
+			  DS620_REG_CONFIG_TLF);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+			  DS620_REG_CONFIG_THF);
+
+static struct attribute *ds620_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ds620_group = {
+	.attrs = ds620_attributes,
+};
+
+static int ds620_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct ds620_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct ds620_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	/* Initialize the DS620 chip */
+	ds620_init_client(client);
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &ds620_group);
+	if (err)
+		goto exit_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	dev_info(&client->dev, "temperature sensor found\n");
+
+	return 0;
+
+exit_remove_files:
+	sysfs_remove_group(&client->dev.kobj, &ds620_group);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int ds620_remove(struct i2c_client *client)
+{
+	struct ds620_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &ds620_group);
+
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id ds620_id[] = {
+	{"ds620", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ds620_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ds620_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		   .name = "ds620",
+	},
+	.probe = ds620_probe,
+	.remove = ds620_remove,
+	.id_table = ds620_id,
+};
+
+static int __init ds620_init(void)
+{
+	return i2c_add_driver(&ds620_driver);
+}
+
+static void __exit ds620_exit(void)
+{
+	i2c_del_driver(&ds620_driver);
+}
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("DS620 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds620_init);
+module_exit(ds620_exit);
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index 8dee3f38fdfb..5dea9faa1656 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -269,23 +269,30 @@ static int emc1403_detect(struct i2c_client *client,
 			struct i2c_board_info *info)
 {
 	int id;
-	/* Check if thermal chip is SMSC and EMC1403 */
+	/* Check if thermal chip is SMSC and EMC1403 or EMC1423 */
 
 	id = i2c_smbus_read_byte_data(client, THERMAL_SMSC_ID_REG);
 	if (id != 0x5d)
 		return -ENODEV;
 
+	id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
+	switch (id) {
+	case 0x21:
+		strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
+		break;
+	case 0x23:
+		strlcpy(info->type, "emc1423", I2C_NAME_SIZE);
+		break;
 	/* Note: 0x25 is the 1404 which is very similar and this
 	   driver could be extended */
-	id = i2c_smbus_read_byte_data(client, THERMAL_PID_REG);
-	if (id != 0x21)
+	default:
 		return -ENODEV;
+	}
 
 	id = i2c_smbus_read_byte_data(client, THERMAL_REVISION_REG);
 	if (id != 0x01)
 		return -ENODEV;
 
-	strlcpy(info->type, "emc1403", I2C_NAME_SIZE);
 	return 0;
 }
 
@@ -342,6 +349,7 @@ static const unsigned short emc1403_address_list[] = {
 
 static const struct i2c_device_id emc1403_idtable[] = {
 	{ "emc1403", 0 },
+	{ "emc1423", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, emc1403_idtable);
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 525a00bd70b1..92f949767ece 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -28,6 +28,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1309,7 +1311,7 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 
 	if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Out of memory\n");
+		pr_err("Out of memory\n");
 		goto exit;
 	}
 
@@ -1451,7 +1453,7 @@ static int __init f71805f_device_add(unsigned short address,
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
@@ -1462,22 +1464,20 @@ static int __init f71805f_device_add(unsigned short address,
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct f71805f_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
@@ -1516,30 +1516,27 @@ static int __init f71805f_find(int sioaddr, unsigned short *address,
 		sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1);
 		break;
 	default:
-		printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
-		       "skipping\n");
+		pr_info("Unsupported Fintek device, skipping\n");
 		goto exit;
 	}
 
 	superio_select(sioaddr, F71805F_LD_HWM);
 	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
-		printk(KERN_WARNING DRVNAME ": Device not activated, "
-		       "skipping\n");
+		pr_warn("Device not activated, skipping\n");
 		goto exit;
 	}
 
 	*address = superio_inw(sioaddr, SIO_REG_ADDR);
 	if (*address == 0) {
-		printk(KERN_WARNING DRVNAME ": Base address not set, "
-		       "skipping\n");
+		pr_warn("Base address not set, skipping\n");
 		goto exit;
 	}
 	*address &= ~(REGION_LENGTH - 1);	/* Ignore 3 LSB */
 
 	err = 0;
-	printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %u\n",
-	       names[sio_data->kind], *address,
-	       superio_inb(sioaddr, SIO_REG_DEVREV));
+	pr_info("Found %s chip at %#x, revision %u\n",
+		names[sio_data->kind], *address,
+		superio_inb(sioaddr, SIO_REG_DEVREV));
 
 exit:
 	superio_exit(sioaddr);
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 75afb3b0e076..3f49dd376f02 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -18,6 +18,8 @@
  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  ***************************************************************************/
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -865,8 +867,7 @@ static inline int superio_enter(int base)
 {
 	/* Don't step on other drivers' I/O space by accident */
 	if (!request_muxed_region(base, 2, DRVNAME)) {
-		printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
-				base);
+		pr_err("I/O address 0x%04x already in use\n", base);
 		return -EBUSY;
 	}
 
@@ -2192,7 +2193,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = superio_inw(sioaddr, SIO_REG_MANID);
 	if (devid != SIO_FINTEK_ID) {
-		pr_debug(DRVNAME ": Not a Fintek device\n");
+		pr_debug("Not a Fintek device\n");
 		err = -ENODEV;
 		goto exit;
 	}
@@ -2215,8 +2216,8 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 		sio_data->type = f8000;
 		break;
 	default:
-		printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
-		       (unsigned int)devid);
+		pr_info("Unsupported Fintek device: %04x\n",
+			(unsigned int)devid);
 		err = -ENODEV;
 		goto exit;
 	}
@@ -2227,21 +2228,21 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 		superio_select(sioaddr, SIO_F71882FG_LD_HWM);
 
 	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
-		printk(KERN_WARNING DRVNAME ": Device not activated\n");
+		pr_warn("Device not activated\n");
 		err = -ENODEV;
 		goto exit;
 	}
 
 	*address = superio_inw(sioaddr, SIO_REG_ADDR);
 	if (*address == 0) {
-		printk(KERN_WARNING DRVNAME ": Base address not set\n");
+		pr_warn("Base address not set\n");
 		err = -ENODEV;
 		goto exit;
 	}
 	*address &= ~(REGION_LENGTH - 1);	/* Ignore 3 LSB */
 
 	err = 0;
-	printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n",
+	pr_info("Found %s chip at %#x, revision %d\n",
 		f71882fg_names[sio_data->type],	(unsigned int)*address,
 		(int)superio_inb(sioaddr, SIO_REG_DEVREV));
 exit:
@@ -2270,20 +2271,20 @@ static int __init f71882fg_device_add(unsigned short address,
 
 	err = platform_device_add_resources(f71882fg_pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed\n");
+		pr_err("Device resource addition failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(f71882fg_pdev, sio_data,
 				       sizeof(struct f71882fg_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(f71882fg_pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed\n");
+		pr_err("Device addition failed\n");
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index d4d4ca65d371..aa6d8b686f82 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -49,7 +49,6 @@
 #include <linux/kref.h>
 
 /* Addresses to scan */
-static DEFINE_MUTEX(watchdog_mutex);
 static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
 
 /* Insmod parameters */
@@ -850,7 +849,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
 
 static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 				WDIOF_CARDRESET,
 		.identity = "FSC watchdog"
@@ -858,7 +857,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
 	int i, ret = 0;
 	struct fschmd_data *data = filp->private_data;
 
-	mutex_lock(&watchdog_mutex);
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		ident.firmware_version = data->revision;
@@ -915,7 +913,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd, unsigned long ar
 	default:
 		ret = -ENOTTY;
 	}
-	mutex_unlock(&watchdog_mutex);
 	return ret;
 }
 
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index aa701a183707..f141a1de519c 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -376,10 +376,6 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		}
 	}
 
-	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
-	if (err)
-		goto err_free_gpio;
-
 	fan_data->num_ctrl = num_ctrl;
 	fan_data->ctrl = ctrl;
 	fan_data->num_speed = pdata->num_speed;
@@ -391,6 +387,10 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		goto err_free_gpio;
 	}
 
+	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
+	if (err)
+		goto err_free_gpio;
+
 	return 0;
 
 err_free_gpio:
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index a56a78412fcb..3d21fa2b97cd 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -20,6 +20,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
@@ -147,7 +149,7 @@ int lis3lv02d_acpi_write(struct lis3lv02d *lis3, int reg, u8 val)
 static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi)
 {
 	lis3_dev.ac = *((union axis_conversion *)dmi->driver_data);
-	printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident);
+	pr_info("hardware type %s found\n", dmi->ident);
 
 	return 1;
 }
@@ -303,11 +305,10 @@ static int lis3lv02d_add(struct acpi_device *device)
 
 	/* If possible use a "standard" axes order */
 	if (lis3_dev.ac.x && lis3_dev.ac.y && lis3_dev.ac.z) {
-		printk(KERN_INFO DRIVER_NAME ": Using custom axes %d,%d,%d\n",
-		       lis3_dev.ac.x, lis3_dev.ac.y, lis3_dev.ac.z);
+		pr_info("Using custom axes %d,%d,%d\n",
+			lis3_dev.ac.x, lis3_dev.ac.y, lis3_dev.ac.z);
 	} else if (dmi_check_system(lis3lv02d_dmi_ids) == 0) {
-		printk(KERN_INFO DRIVER_NAME ": laptop model unknown, "
-				 "using default axes configuration\n");
+		pr_info("laptop model unknown, using default axes configuration\n");
 		lis3_dev.ac = lis3lv02d_axis_normal;
 	}
 
@@ -385,7 +386,7 @@ static int __init lis3lv02d_init_module(void)
 	if (ret < 0)
 		return ret;
 
-	printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
+	pr_info("driver loaded\n");
 
 	return 0;
 }
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 2b2ca1694f95..2582bfef6ccb 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -22,6 +22,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/hwmon-vid.h>
@@ -146,8 +148,8 @@ int vid_from_reg(int val, u8 vrm)
 		return(val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000);
 	default:		/* report 0 for unknown */
 		if (vrm)
-			printk(KERN_WARNING "hwmon-vid: Requested unsupported "
-			       "VRM version (%u)\n", (unsigned int)vrm);
+			pr_warn("Requested unsupported VRM version (%u)\n",
+				(unsigned int)vrm);
 		return 0;
 	}
 }
@@ -246,8 +248,7 @@ u8 vid_which_vrm(void)
 	}
 	vrm_ret = find_vrm(eff_family, eff_model, eff_stepping, c->x86_vendor);
 	if (vrm_ret == 0)
-		printk(KERN_INFO "hwmon-vid: Unknown VRM version of your "
-		       "x86 CPU\n");
+		pr_info("Unknown VRM version of your x86 CPU\n");
 	return vrm_ret;
 }
 
@@ -255,7 +256,7 @@ u8 vid_which_vrm(void)
 #else
 u8 vid_which_vrm(void)
 {
-	printk(KERN_INFO "hwmon-vid: Unknown VRM version of your CPU\n");
+	pr_info("Unknown VRM version of your CPU\n");
 	return 0;
 }
 #endif
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c
index 29ea6753f3bb..a61e7815a2a9 100644
--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -10,6 +10,8 @@
     the Free Software Foundation; version 2 of the License.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -119,7 +121,7 @@ static int __init hwmon_init(void)
 
 	hwmon_class = class_create(THIS_MODULE, "hwmon");
 	if (IS_ERR(hwmon_class)) {
-		printk(KERN_ERR "hwmon.c: couldn't create sysfs class\n");
+		pr_err("couldn't create sysfs class\n");
 		return PTR_ERR(hwmon_class);
 	}
 	return 0;
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 937983407e2a..c4c40be0edbf 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -497,12 +497,14 @@ static unsigned long chipset_ids[] = {
 	0
 };
 
+#ifdef MODULE
 static struct pci_device_id i5k_amb_ids[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
+#endif
 
 static int __devinit i5k_amb_probe(struct platform_device *pdev)
 {
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index eaee546af19a..bc6e2ab3a361 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -20,6 +20,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/ipmi.h>
 #include <linux/module.h>
 #include <linux/hwmon.h>
@@ -1090,7 +1092,7 @@ static int __init aem_init(void)
 
 	res = driver_register(&aem_driver.driver);
 	if (res) {
-		printk(KERN_ERR "Can't register aem driver\n");
+		pr_err("Can't register aem driver\n");
 		return res;
 	}
 
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 14a5d981be7d..316b64823f7b 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -38,6 +38,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -187,6 +189,7 @@ static const u8 IT87_REG_FANX_MIN[]	= { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
 #define IT87_REG_FAN_MAIN_CTRL 0x13
 #define IT87_REG_FAN_CTL       0x14
 #define IT87_REG_PWM(nr)       (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr)  (0x63 + (nr) * 8)
 
 #define IT87_REG_VIN(nr)       (0x20 + (nr))
 #define IT87_REG_TEMP(nr)      (0x29 + (nr))
@@ -251,12 +254,16 @@ struct it87_data {
 	u8 fan_main_ctrl;	/* Register value */
 	u8 fan_ctl;		/* Register value */
 
-	/* The following 3 arrays correspond to the same registers. The
-	 * meaning of bits 6-0 depends on the value of bit 7, and we want
-	 * to preserve settings on mode changes, so we have to track all
-	 * values separately. */
+	/* The following 3 arrays correspond to the same registers up to
+	 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+	 * 7, and we want to preserve settings on mode changes, so we have
+	 * to track all values separately.
+	 * Starting with the IT8721F, the manual PWM duty cycles are stored
+	 * in separate registers (8-bit values), so the separate tracking
+	 * is no longer needed, but it is still done to keep the driver
+	 * simple. */
 	u8 pwm_ctrl[3];		/* Register value */
-	u8 pwm_duty[3];		/* Manual PWM value set by user (bit 6-0) */
+	u8 pwm_duty[3];		/* Manual PWM value set by user */
 	u8 pwm_temp_map[3];	/* PWM to temp. chan. mapping (bits 1-0) */
 
 	/* Automatic fan speed control registers */
@@ -832,7 +839,9 @@ static ssize_t set_pwm_enable(struct device *dev,
 				 data->fan_main_ctrl);
 	} else {
 		if (val == 1)				/* Manual mode */
-			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			data->pwm_ctrl[nr] = data->type == it8721 ?
+					     data->pwm_temp_map[nr] :
+					     data->pwm_duty[nr];
 		else					/* Automatic mode */
 			data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
 		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
@@ -858,12 +867,25 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->pwm_duty[nr] = pwm_to_reg(data, val);
-	/* If we are in manual mode, write the duty cycle immediately;
-	 * otherwise, just store it for later use. */
-	if (!(data->pwm_ctrl[nr] & 0x80)) {
-		data->pwm_ctrl[nr] = data->pwm_duty[nr];
-		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+	if (data->type == it8721) {
+		/* If we are in automatic mode, the PWM duty cycle register
+		 * is read-only so we can't write the value */
+		if (data->pwm_ctrl[nr] & 0x80) {
+			mutex_unlock(&data->update_lock);
+			return -EBUSY;
+		}
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+				 data->pwm_duty[nr]);
+	} else {
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		/* If we are in manual mode, write the duty cycle immediately;
+		 * otherwise, just store it for later use. */
+		if (!(data->pwm_ctrl[nr] & 0x80)) {
+			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			it87_write_value(data, IT87_REG_PWM(nr),
+					 data->pwm_ctrl[nr]);
+		}
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -1550,26 +1572,25 @@ static int __init it87_find(unsigned short *address,
 	case 0xffff:	/* No device at all */
 		goto exit;
 	default:
-		pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
-			 chip_type);
+		pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
 		goto exit;
 	}
 
 	superio_select(PME);
 	if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
-		pr_info("it87: Device not activated, skipping\n");
+		pr_info("Device not activated, skipping\n");
 		goto exit;
 	}
 
 	*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
 	if (*address == 0) {
-		pr_info("it87: Base address not set, skipping\n");
+		pr_info("Base address not set, skipping\n");
 		goto exit;
 	}
 
 	err = 0;
 	sio_data->revision = superio_inb(DEVREV) & 0x0f;
-	pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+	pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
 		chip_type, *address, sio_data->revision);
 
 	/* in8 (Vbat) is always internal */
@@ -1595,7 +1616,7 @@ static int __init it87_find(unsigned short *address,
 		} else {
 			/* We need at least 4 VID pins */
 			if (reg & 0x0f) {
-				pr_info("it87: VID is disabled (pins used for GPIO)\n");
+				pr_info("VID is disabled (pins used for GPIO)\n");
 				sio_data->skip_vid = 1;
 			}
 		}
@@ -1631,7 +1652,7 @@ static int __init it87_find(unsigned short *address,
 		if (sio_data->type == it8720 && !(reg & (1 << 1))) {
 			reg |= (1 << 1);
 			superio_outb(IT87_SIO_PINX2_REG, reg);
-			pr_notice("it87: Routing internal VCCH to in7\n");
+			pr_notice("Routing internal VCCH to in7\n");
 		}
 		if (reg & (1 << 0))
 			sio_data->internal |= (1 << 0);
@@ -1641,7 +1662,7 @@ static int __init it87_find(unsigned short *address,
 		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	}
 	if (sio_data->beep_pin)
-		pr_info("it87: Beeping is supported\n");
+		pr_info("Beeping is supported\n");
 
 	/* Disable specific features based on DMI strings */
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1655,8 +1676,7 @@ static int __init it87_find(unsigned short *address,
 			   the PWM2 duty cycle, so we disable it.
 			   I use the board name string as the trigger in case
 			   the same board is ever used in other systems. */
-			pr_info("it87: Disabling pwm2 due to "
-				"hardware constraints\n");
+			pr_info("Disabling pwm2 due to hardware constraints\n");
 			sio_data->skip_pwm = (1 << 1);
 		}
 	}
@@ -1958,7 +1978,10 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	 *   channels to use when later setting to automatic mode later.
 	 *   Use a 1:1 mapping by default (we are clueless.)
 	 * In both cases, the value can (and should) be changed by the user
-	 * prior to switching to a different mode. */
+	 * prior to switching to a different mode.
+	 * Note that this is no longer needed for the IT8721F and later, as
+	 * these have separate registers for the temperature mapping and the
+	 * manual duty cycle. */
 	for (i = 0; i < 3; i++) {
 		data->pwm_temp_map[i] = i;
 		data->pwm_duty[i] = 0x7f;	/* Full speed */
@@ -2034,10 +2057,16 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
 {
 	data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
-	if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+	if (data->type == it8721) {
 		data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
-	else				/* Manual mode */
-		data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+		data->pwm_duty[nr] = it87_read_value(data,
+						     IT87_REG_PWM_DUTY(nr));
+	} else {
+		if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+			data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+		else				/* Manual mode */
+			data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+	}
 
 	if (has_old_autopwm(data)) {
 		int i;
@@ -2160,28 +2189,26 @@ static int __init it87_device_add(unsigned short address,
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct it87_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 0cee73a6124e..d805e8e57967 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -20,6 +20,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/dmi.h>
@@ -860,8 +862,7 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
 					(p->irq_flags2 & IRQF_TRIGGER_MASK),
 					DRIVER_NAME, &lis3_dev);
 		if (err < 0)
-			printk(KERN_ERR DRIVER_NAME
-				"No second IRQ. Limited functionality\n");
+			pr_err("No second IRQ. Limited functionality\n");
 	}
 }
 
@@ -879,7 +880,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 
 	switch (dev->whoami) {
 	case WAI_12B:
-		printk(KERN_INFO DRIVER_NAME ": 12 bits sensor found\n");
+		pr_info("12 bits sensor found\n");
 		dev->read_data = lis3lv02d_read_12;
 		dev->mdps_max_val = 2048;
 		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_12B;
@@ -890,7 +891,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 		dev->regs_size = ARRAY_SIZE(lis3_wai12_regs);
 		break;
 	case WAI_8B:
-		printk(KERN_INFO DRIVER_NAME ": 8 bits sensor found\n");
+		pr_info("8 bits sensor found\n");
 		dev->read_data = lis3lv02d_read_8;
 		dev->mdps_max_val = 128;
 		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
@@ -901,7 +902,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 		dev->regs_size = ARRAY_SIZE(lis3_wai8_regs);
 		break;
 	case WAI_3DC:
-		printk(KERN_INFO DRIVER_NAME ": 8 bits 3DC sensor found\n");
+		pr_info("8 bits 3DC sensor found\n");
 		dev->read_data = lis3lv02d_read_8;
 		dev->mdps_max_val = 128;
 		dev->pwron_delay = LIS3_PWRON_DELAY_WAI_8B;
@@ -910,8 +911,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 		dev->scale = LIS3_SENSITIVITY_8B;
 		break;
 	default:
-		printk(KERN_ERR DRIVER_NAME
-			": unknown sensor type 0x%X\n", dev->whoami);
+		pr_err("unknown sensor type 0x%X\n", dev->whoami);
 		return -EINVAL;
 	}
 
@@ -935,7 +935,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 	}
 
 	if (lis3lv02d_joystick_enable())
-		printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
+		pr_err("joystick initialization failed\n");
 
 	/* passing in platform specific data is purely optional and only
 	 * used by the SPI transport layer at the moment */
@@ -957,8 +957,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 
 	/* bail if we did not get an IRQ from the bus layer */
 	if (!dev->irq) {
-		printk(KERN_ERR DRIVER_NAME
-			": No IRQ. Disabling /dev/freefall\n");
+		pr_debug("No IRQ. Disabling /dev/freefall\n");
 		goto out;
 	}
 
@@ -985,12 +984,12 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 				DRIVER_NAME, &lis3_dev);
 
 	if (err < 0) {
-		printk(KERN_ERR DRIVER_NAME "Cannot get IRQ\n");
+		pr_err("Cannot get IRQ\n");
 		goto out;
 	}
 
 	if (misc_register(&lis3lv02d_misc_device))
-		printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
+		pr_err("misc_register failed\n");
 out:
 	return 0;
 }
diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index 9f4bae07f719..8853afce85ce 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -186,7 +186,7 @@ static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int lis3lv02d_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -213,12 +213,9 @@ static int lis3lv02d_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#else
-#define lis3lv02d_i2c_suspend	NULL
-#define lis3lv02d_i2c_resume	NULL
-#define lis3lv02d_i2c_shutdown	NULL
-#endif
+#endif /* CONFIG_PM_SLEEP */
 
+#ifdef CONFIG_PM_RUNTIME
 static int lis3_i2c_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -236,6 +233,7 @@ static int lis3_i2c_runtime_resume(struct device *dev)
 	lis3lv02d_poweron(lis3);
 	return 0;
 }
+#endif /* CONFIG_PM_RUNTIME */
 
 static const struct i2c_device_id lis3lv02d_id[] = {
 	{"lis3lv02d", 0 },
diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index fd108cfc05c7..3b84fb503053 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -24,6 +24,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -67,8 +69,7 @@ static ssize_t lm70_sense_temp(struct device *dev,
 	 */
 	status = spi_write_then_read(spi, NULL, 0, &rxbuf[0], 2);
 	if (status < 0) {
-		printk(KERN_WARNING
-		"spi_write_then_read failed with status %d\n", status);
+		pr_warn("spi_write_then_read failed with status %d\n", status);
 		goto out;
 	}
 	raw = (rxbuf[0] << 8) + rxbuf[1];
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 72ff2c4e757d..4cb24eafe318 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -19,6 +19,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -858,7 +860,7 @@ static int __init lm78_isa_found(unsigned short address)
 	 * individually for the probing phase. */
 	for (port = address; port < address + LM78_EXTENT; port++) {
 		if (!request_region(port, 1, "lm78")) {
-			pr_debug("lm78: Failed to request port 0x%x\n", port);
+			pr_debug("Failed to request port 0x%x\n", port);
 			goto release;
 		}
 	}
@@ -920,7 +922,7 @@ static int __init lm78_isa_found(unsigned short address)
 		found = 1;
 
 	if (found)
-		pr_info("lm78: Found an %s chip at %#x\n",
+		pr_info("Found an %s chip at %#x\n",
 			val & 0x80 ? "LM79" : "LM78", (int)address);
 
  release:
@@ -942,21 +944,19 @@ static int __init lm78_isa_device_add(unsigned short address)
 	pdev = platform_device_alloc("lm78", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "lm78: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR "lm78: Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "lm78: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 6669255aadcf..3b43df418613 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -20,7 +20,7 @@
     Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
         Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
 
-    Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+    Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
         Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
 
     This program is free software; you can redistribute it and/or modify
@@ -135,6 +135,11 @@
 #define LM93_MFR_ID		0x73
 #define LM93_MFR_ID_PROTOTYPE	0x72
 
+/* LM94 REGISTER VALUES */
+#define LM94_MFR_ID_2		0x7a
+#define LM94_MFR_ID		0x79
+#define LM94_MFR_ID_PROTOTYPE	0x78
+
 /* SMBus capabilities */
 #define LM93_SMBUS_FUNC_FULL (I2C_FUNC_SMBUS_BYTE_DATA | \
 		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA)
@@ -2504,6 +2509,7 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	int mfr, ver;
+	const char *name;
 
 	if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
 		return -ENODEV;
@@ -2517,13 +2523,23 @@ static int lm93_detect(struct i2c_client *client, struct i2c_board_info *info)
 	}
 
 	ver = lm93_read_byte(client, LM93_REG_VER);
-	if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) {
+	switch (ver) {
+	case LM93_MFR_ID:
+	case LM93_MFR_ID_PROTOTYPE:
+		name = "lm93";
+		break;
+	case LM94_MFR_ID_2:
+	case LM94_MFR_ID:
+	case LM94_MFR_ID_PROTOTYPE:
+		name = "lm94";
+		break;
+	default:
 		dev_dbg(&adapter->dev,
 			"detect failed, bad version id 0x%02x!\n", ver);
 		return -ENODEV;
 	}
 
-	strlcpy(info->type, "lm93", I2C_NAME_SIZE);
+	strlcpy(info->type, name, I2C_NAME_SIZE);
 	dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
 		client->name, i2c_adapter_id(client->adapter),
 		client->addr);
@@ -2602,6 +2618,7 @@ static int lm93_remove(struct i2c_client *client)
 
 static const struct i2c_device_id lm93_id[] = {
 	{ "lm93", 0 },
+	{ "lm94", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm93_id);
@@ -2629,7 +2646,7 @@ static void __exit lm93_exit(void)
 }
 
 MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
-		"Hans J. Koch <hjk@linutronix.de");
+		"Hans J. Koch <hjk@hansjkoch.de>");
 MODULE_DESCRIPTION("LM93 driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 464340f25496..1a6dfb6df1e7 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -1,13 +1,9 @@
 /*
- * lm95241.c - Part of lm_sensors, Linux kernel modules for hardware
- *             monitoring
- * Copyright (C) 2008 Davide Rizzo <elpa-rizzo@gmail.com>
+ * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
  *
- * Based on the max1619 driver. The LM95241 is a sensor chip made by National
- *   Semiconductors.
- * It reports up to three temperatures (its own plus up to
- * two external ones). Complete datasheet can be
- * obtained from National's website at:
+ * The LM95241 is a sensor chip made by National Semiconductors.
+ * It reports up to three temperatures (its own plus up to two external ones).
+ * Complete datasheet can be obtained from National's website at:
  *   http://www.national.com/ds.cgi/LM/LM95241.pdf
  *
  * This program is free software; you can redistribute it and/or modify
@@ -36,8 +32,10 @@
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
 
+#define DEVNAME "lm95241"
+
 static const unsigned short normal_i2c[] = {
-	0x19, 0x2a, 0x2b, I2C_CLIENT_END};
+	0x19, 0x2a, 0x2b, I2C_CLIENT_END };
 
 /* LM95241 registers */
 #define LM95241_REG_R_MAN_ID		0xFE
@@ -46,7 +44,7 @@ static const unsigned short normal_i2c[] = {
 #define LM95241_REG_RW_CONFIG		0x03
 #define LM95241_REG_RW_REM_FILTER	0x06
 #define LM95241_REG_RW_TRUTHERM		0x07
-#define LM95241_REG_W_ONE_SHOT  	0x0F
+#define LM95241_REG_W_ONE_SHOT		0x0F
 #define LM95241_REG_R_LOCAL_TEMPH	0x10
 #define LM95241_REG_R_REMOTE1_TEMPH	0x11
 #define LM95241_REG_R_REMOTE2_TEMPH	0x12
@@ -79,226 +77,246 @@ static const unsigned short normal_i2c[] = {
 #define MANUFACTURER_ID 0x01
 #define DEFAULT_REVISION 0xA4
 
-/* Conversions and various macros */
-#define TEMP_FROM_REG(val_h, val_l) (((val_h) & 0x80 ? (val_h) - 0x100 : \
-    (val_h)) * 1000 + (val_l) * 1000 / 256)
-
-/* Functions declaration */
-static void lm95241_init_client(struct i2c_client *client);
-static struct lm95241_data *lm95241_update_device(struct device *dev);
+static const u8 lm95241_reg_address[] = {
+	LM95241_REG_R_LOCAL_TEMPH,
+	LM95241_REG_R_LOCAL_TEMPL,
+	LM95241_REG_R_REMOTE1_TEMPH,
+	LM95241_REG_R_REMOTE1_TEMPL,
+	LM95241_REG_R_REMOTE2_TEMPH,
+	LM95241_REG_R_REMOTE2_TEMPL
+};
 
 /* Client data (each client gets its own) */
 struct lm95241_data {
 	struct device *hwmon_dev;
 	struct mutex update_lock;
-	unsigned long last_updated, interval; /* in jiffies */
-	char valid; /* zero until following fields are valid */
+	unsigned long last_updated, interval;	/* in jiffies */
+	char valid;		/* zero until following fields are valid */
 	/* registers values */
-	u8 local_h, local_l; /* local */
-	u8 remote1_h, remote1_l; /* remote1 */
-	u8 remote2_h, remote2_l; /* remote2 */
+	u8 temp[ARRAY_SIZE(lm95241_reg_address)];
 	u8 config, model, trutherm;
 };
 
+/* Conversions */
+static int TempFromReg(u8 val_h, u8 val_l)
+{
+	if (val_h & 0x80)
+		return val_h - 0x100;
+	return val_h * 1000 + val_l * 1000 / 256;
+}
+
+static struct lm95241_data *lm95241_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95241_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + data->interval) ||
+	    !data->valid) {
+		int i;
+
+		dev_dbg(&client->dev, "Updating lm95241 data.\n");
+		for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++)
+			data->temp[i]
+			  = i2c_smbus_read_byte_data(client,
+						     lm95241_reg_address[i]);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
 /* Sysfs stuff */
-#define show_temp(value) \
-static ssize_t show_##value(struct device *dev, \
-    struct device_attribute *attr, char *buf) \
-{ \
-	struct lm95241_data *data = lm95241_update_device(dev); \
-	snprintf(buf, PAGE_SIZE - 1, "%d\n", \
-		TEMP_FROM_REG(data->value##_h, data->value##_l)); \
-	return strlen(buf); \
+static ssize_t show_input(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct lm95241_data *data = lm95241_update_device(dev);
+
+	return snprintf(buf, PAGE_SIZE - 1, "%d\n",
+		TempFromReg(data->temp[to_sensor_dev_attr(attr)->index],
+			    data->temp[to_sensor_dev_attr(attr)->index + 1]));
 }
-show_temp(local);
-show_temp(remote1);
-show_temp(remote2);
 
-static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
+static ssize_t show_type(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
-	struct lm95241_data *data = lm95241_update_device(dev);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95241_data *data = i2c_get_clientdata(client);
 
-	snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval / HZ);
-	return strlen(buf);
+	return snprintf(buf, PAGE_SIZE - 1,
+		data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n");
 }
 
-static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
+static ssize_t set_type(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm95241_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	int shift;
+	u8 mask = to_sensor_dev_attr(attr)->index;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val != 1 && val != 2)
+		return -EINVAL;
 
-	strict_strtol(buf, 10, &data->interval);
-	data->interval = data->interval * HZ / 1000;
+	shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT;
+
+	mutex_lock(&data->update_lock);
+
+	data->trutherm &= ~(TT_MASK << shift);
+	if (val == 1) {
+		data->model |= mask;
+		data->trutherm |= (TT_ON << shift);
+	} else {
+		data->model &= ~mask;
+		data->trutherm |= (TT_OFF << shift);
+	}
+	data->valid = 0;
+
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
+				  data->model);
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
+				  data->trutherm);
+
+	mutex_unlock(&data->update_lock);
 
 	return count;
 }
 
-#define show_type(flag) \
-static ssize_t show_type##flag(struct device *dev, \
-				   struct device_attribute *attr, char *buf) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct lm95241_data *data = i2c_get_clientdata(client); \
-\
-	snprintf(buf, PAGE_SIZE - 1, \
-		data->model & R##flag##MS_MASK ? "1\n" : "2\n"); \
-	return strlen(buf); \
+static ssize_t show_min(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95241_data *data = i2c_get_clientdata(client);
+
+	return snprintf(buf, PAGE_SIZE - 1,
+			data->config & to_sensor_dev_attr(attr)->index ?
+			"-127000\n" : "0\n");
 }
-show_type(1);
-show_type(2);
-
-#define show_min(flag) \
-static ssize_t show_min##flag(struct device *dev, \
-    struct device_attribute *attr, char *buf) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct lm95241_data *data = i2c_get_clientdata(client); \
-\
-	snprintf(buf, PAGE_SIZE - 1, \
-		data->config & R##flag##DF_MASK ?	\
-		"-127000\n" : "0\n"); \
-	return strlen(buf); \
+
+static ssize_t set_min(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95241_data *data = i2c_get_clientdata(client);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val < -128000)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	if (val < 0)
+		data->config |= to_sensor_dev_attr(attr)->index;
+	else
+		data->config &= ~to_sensor_dev_attr(attr)->index;
+	data->valid = 0;
+
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
 }
-show_min(1);
-show_min(2);
-
-#define show_max(flag) \
-static ssize_t show_max##flag(struct device *dev, \
-    struct device_attribute *attr, char *buf) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct lm95241_data *data = i2c_get_clientdata(client); \
-\
-	snprintf(buf, PAGE_SIZE - 1, \
-		data->config & R##flag##DF_MASK ? \
-		"127000\n" : "255000\n"); \
-	return strlen(buf); \
+
+static ssize_t show_max(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95241_data *data = i2c_get_clientdata(client);
+
+	return snprintf(buf, PAGE_SIZE - 1,
+			data->config & to_sensor_dev_attr(attr)->index ?
+			"127000\n" : "255000\n");
 }
-show_max(1);
-show_max(2);
-
-#define set_type(flag) \
-static ssize_t set_type##flag(struct device *dev, \
-				  struct device_attribute *attr, \
-				  const char *buf, size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct lm95241_data *data = i2c_get_clientdata(client); \
-\
-	long val; \
-	strict_strtol(buf, 10, &val); \
-\
-	if ((val == 1) || (val == 2)) { \
-\
-		mutex_lock(&data->update_lock); \
-\
-		data->trutherm &= ~(TT_MASK << TT##flag##_SHIFT); \
-		if (val == 1) { \
-			data->model |= R##flag##MS_MASK; \
-			data->trutherm |= (TT_ON << TT##flag##_SHIFT); \
-		} \
-		else { \
-			data->model &= ~R##flag##MS_MASK; \
-			data->trutherm |= (TT_OFF << TT##flag##_SHIFT); \
-		} \
-\
-		data->valid = 0; \
-\
-		i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL, \
-					  data->model); \
-		i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM, \
-					  data->trutherm); \
-\
-		mutex_unlock(&data->update_lock); \
-\
-	} \
-	return count; \
+
+static ssize_t set_max(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95241_data *data = i2c_get_clientdata(client);
+	long val;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
+	if (val >= 256000)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+
+	if (val <= 127000)
+		data->config |= to_sensor_dev_attr(attr)->index;
+	else
+		data->config &= ~to_sensor_dev_attr(attr)->index;
+	data->valid = 0;
+
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
 }
-set_type(1);
-set_type(2);
-
-#define set_min(flag) \
-static ssize_t set_min##flag(struct device *dev, \
-	struct device_attribute *devattr, const char *buf, size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct lm95241_data *data = i2c_get_clientdata(client); \
-\
-	long val; \
-	strict_strtol(buf, 10, &val); \
-\
-	mutex_lock(&data->update_lock); \
-\
-	if (val < 0) \
-		data->config |= R##flag##DF_MASK; \
-	else \
-		data->config &= ~R##flag##DF_MASK; \
-\
-	data->valid = 0; \
-\
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
-		data->config); \
-\
-	mutex_unlock(&data->update_lock); \
-\
-	return count; \
+
+static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct lm95241_data *data = lm95241_update_device(dev);
+
+	return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval
+			/ HZ);
 }
-set_min(1);
-set_min(2);
-
-#define set_max(flag) \
-static ssize_t set_max##flag(struct device *dev, \
-	struct device_attribute *devattr, const char *buf, size_t count) \
-{ \
-	struct i2c_client *client = to_i2c_client(dev); \
-	struct lm95241_data *data = i2c_get_clientdata(client); \
-\
-	long val; \
-	strict_strtol(buf, 10, &val); \
-\
-	mutex_lock(&data->update_lock); \
-\
-	if (val <= 127000) \
-		data->config |= R##flag##DF_MASK; \
-	else \
-		data->config &= ~R##flag##DF_MASK; \
-\
-	data->valid = 0; \
-\
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, \
-		data->config); \
-\
-	mutex_unlock(&data->update_lock); \
-\
-	return count; \
+
+static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm95241_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	data->interval = val * HZ / 1000;
+
+	return count;
 }
-set_max(1);
-set_max(2);
-
-static DEVICE_ATTR(temp1_input, S_IRUGO, show_local, NULL);
-static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote1, NULL);
-static DEVICE_ATTR(temp3_input, S_IRUGO, show_remote2, NULL);
-static DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type1, set_type1);
-static DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type2, set_type2);
-static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1);
-static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2);
-static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1);
-static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type,
+			  R1MS_MASK);
+static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type,
+			  R2MS_MASK);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min,
+			  R1DF_MASK);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min,
+			  R2DF_MASK);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max,
+			  R1DF_MASK);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max,
+			  R2DF_MASK);
 static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
 		   set_interval);
 
 static struct attribute *lm95241_attributes[] = {
-	&dev_attr_temp1_input.attr,
-	&dev_attr_temp2_input.attr,
-	&dev_attr_temp3_input.attr,
-	&dev_attr_temp2_type.attr,
-	&dev_attr_temp3_type.attr,
-	&dev_attr_temp2_min.attr,
-	&dev_attr_temp3_min.attr,
-	&dev_attr_temp2_max.attr,
-	&dev_attr_temp3_max.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_type.dev_attr.attr,
+	&sensor_dev_attr_temp3_type.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
 	&dev_attr_update_interval.attr,
 	NULL
 };
@@ -320,9 +338,9 @@ static int lm95241_detect(struct i2c_client *new_client,
 
 	if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
 	     == MANUFACTURER_ID)
-	 && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
-	     >= DEFAULT_REVISION)) {
-		name = "lm95241";
+	    && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
+		>= DEFAULT_REVISION)) {
+		name = DEVNAME;
 	} else {
 		dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
 			address);
@@ -334,6 +352,25 @@ static int lm95241_detect(struct i2c_client *new_client,
 	return 0;
 }
 
+static void lm95241_init_client(struct i2c_client *client)
+{
+	struct lm95241_data *data = i2c_get_clientdata(client);
+
+	data->interval = HZ;	/* 1 sec default */
+	data->valid = 0;
+	data->config = CFG_CR0076;
+	data->model = 0;
+	data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
+
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
+				  R1FE_MASK | R2FE_MASK);
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
+				  data->trutherm);
+	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
+				  data->model);
+}
+
 static int lm95241_probe(struct i2c_client *new_client,
 			 const struct i2c_device_id *id)
 {
@@ -373,26 +410,6 @@ exit:
 	return err;
 }
 
-static void lm95241_init_client(struct i2c_client *client)
-{
-	struct lm95241_data *data = i2c_get_clientdata(client);
-
-	data->interval = HZ;    /* 1 sec default */
-	data->valid = 0;
-	data->config = CFG_CR0076;
-	data->model = 0;
-	data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
-
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG,
-				  data->config);
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
-				  R1FE_MASK | R2FE_MASK);
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
-				  data->trutherm);
-	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
-				  data->model);
-}
-
 static int lm95241_remove(struct i2c_client *client)
 {
 	struct lm95241_data *data = i2c_get_clientdata(client);
@@ -404,46 +421,9 @@ static int lm95241_remove(struct i2c_client *client)
 	return 0;
 }
 
-static struct lm95241_data *lm95241_update_device(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct lm95241_data *data = i2c_get_clientdata(client);
-
-	mutex_lock(&data->update_lock);
-
-	if (time_after(jiffies, data->last_updated + data->interval) ||
-	    !data->valid) {
-		dev_dbg(&client->dev, "Updating lm95241 data.\n");
-		data->local_h =
-			i2c_smbus_read_byte_data(client,
-						 LM95241_REG_R_LOCAL_TEMPH);
-		data->local_l =
-			i2c_smbus_read_byte_data(client,
-						 LM95241_REG_R_LOCAL_TEMPL);
-		data->remote1_h =
-			i2c_smbus_read_byte_data(client,
-						 LM95241_REG_R_REMOTE1_TEMPH);
-		data->remote1_l =
-			i2c_smbus_read_byte_data(client,
-						 LM95241_REG_R_REMOTE1_TEMPL);
-		data->remote2_h =
-			i2c_smbus_read_byte_data(client,
-						 LM95241_REG_R_REMOTE2_TEMPH);
-		data->remote2_l =
-			i2c_smbus_read_byte_data(client,
-						 LM95241_REG_R_REMOTE2_TEMPL);
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-
-	mutex_unlock(&data->update_lock);
-
-	return data;
-}
-
 /* Driver data (common to all clients) */
 static const struct i2c_device_id lm95241_id[] = {
-	{ "lm95241", 0 },
+	{ DEVNAME, 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm95241_id);
@@ -451,7 +431,7 @@ MODULE_DEVICE_TABLE(i2c, lm95241_id);
 static struct i2c_driver lm95241_driver = {
 	.class		= I2C_CLASS_HWMON,
 	.driver = {
-		.name   = "lm95241",
+		.name	= DEVNAME,
 	},
 	.probe		= lm95241_probe,
 	.remove		= lm95241_remove,
@@ -470,7 +450,7 @@ static void __exit sensors_lm95241_exit(void)
 	i2c_del_driver(&lm95241_driver);
 }
 
-MODULE_AUTHOR("Davide Rizzo <elpa-rizzo@gmail.com>");
+MODULE_AUTHOR("Davide Rizzo <elpa.rizzo@gmail.com>");
 MODULE_DESCRIPTION("LM95241 sensor driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 00d975eb5b83..c7e6d8e81656 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -205,7 +205,6 @@ LTC4215_ALARM(curr1_max_alarm,	(1 << 2),	LTC4215_STATUS);
 
 /* Power (virtual) */
 LTC4215_POWER(power1_input);
-LTC4215_ALARM(power1_alarm,	(1 << 3),	LTC4215_STATUS);
 
 /* Input Voltage */
 LTC4215_VOLTAGE(in1_input,			LTC4215_ADIN);
@@ -214,6 +213,7 @@ LTC4215_ALARM(in1_min_alarm,	(1 << 1),	LTC4215_STATUS);
 
 /* Output Voltage */
 LTC4215_VOLTAGE(in2_input,			LTC4215_SOURCE);
+LTC4215_ALARM(in2_min_alarm,	(1 << 3),	LTC4215_STATUS);
 
 /* Finally, construct an array of pointers to members of the above objects,
  * as required for sysfs_create_group()
@@ -223,13 +223,13 @@ static struct attribute *ltc4215_attributes[] = {
 	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_power1_input.dev_attr.attr,
-	&sensor_dev_attr_power1_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
 	&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min_alarm.dev_attr.attr,
 
 	NULL,
 };
diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c
index 267626178678..4b50601027d3 100644
--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -82,7 +82,7 @@ static struct ltc4261_data *ltc4261_update_device(struct device *dev)
 			val = i2c_smbus_read_byte_data(client, i);
 			if (unlikely(val < 0)) {
 				dev_dbg(dev,
-					"Failed to read ADC value: error %d",
+					"Failed to read ADC value: error %d\n",
 					val);
 				ret = ERR_PTR(val);
 				goto abort;
@@ -230,8 +230,7 @@ static int ltc4261_probe(struct i2c_client *client,
 		return -ENODEV;
 
 	if (i2c_smbus_read_byte_data(client, LTC4261_STATUS) < 0) {
-		dev_err(&client->dev, "Failed to read register %d:%02x:%02x\n",
-			adapter->id, client->addr, LTC4261_STATUS);
+		dev_err(&client->dev, "Failed to read status register\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index a0160ee5caef..9a11532ecae8 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -2,7 +2,7 @@
  * max6650.c - Part of lm_sensors, Linux kernel modules for hardware
  *             monitoring.
  *
- * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
  *
  * based on code written by John Morris <john.morris@spirentcom.com>
  * Copyright (c) 2003 Spirent Communications
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 68e69a49633c..3d99b8854d7c 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -33,6 +33,8 @@
  *  the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F).
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1031,16 +1033,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
 
 		val = superio_inb(sioaddr, ACT);
 		if (!(val & 0x01)) {
-			printk(KERN_INFO "pc87360: Device 0x%02x not "
-			       "activated\n", logdev[i]);
+			pr_info("Device 0x%02x not activated\n", logdev[i]);
 			continue;
 		}
 
 		val = (superio_inb(sioaddr, BASE) << 8)
 		    | superio_inb(sioaddr, BASE + 1);
 		if (!val) {
-			printk(KERN_INFO "pc87360: Base address not set for "
-			       "device 0x%02x\n", logdev[i]);
+			pr_info("Base address not set for device 0x%02x\n",
+				logdev[i]);
 			continue;
 		}
 
@@ -1050,17 +1051,15 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
 			confreg[0] = superio_inb(sioaddr, 0xF0);
 			confreg[1] = superio_inb(sioaddr, 0xF1);
 
-#ifdef DEBUG
-			printk(KERN_DEBUG "pc87360: Fan 1: mon=%d "
-			       "ctrl=%d inv=%d\n", (confreg[0]>>2)&1,
-			       (confreg[0]>>3)&1, (confreg[0]>>4)&1);
-			printk(KERN_DEBUG "pc87360: Fan 2: mon=%d "
-			       "ctrl=%d inv=%d\n", (confreg[0]>>5)&1,
-			       (confreg[0]>>6)&1, (confreg[0]>>7)&1);
-			printk(KERN_DEBUG "pc87360: Fan 3: mon=%d "
-			       "ctrl=%d inv=%d\n", confreg[1]&1,
-			       (confreg[1]>>1)&1, (confreg[1]>>2)&1);
-#endif
+			pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 1,
+				 (confreg[0] >> 2) & 1, (confreg[0] >> 3) & 1,
+				 (confreg[0] >> 4) & 1);
+			pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 2,
+				 (confreg[0] >> 5) & 1, (confreg[0] >> 6) & 1,
+				 (confreg[0] >> 7) & 1);
+			pr_debug("Fan %d: mon=%d ctrl=%d inv=%d\n", 3,
+				 confreg[1] & 1, (confreg[1] >> 1) & 1,
+				 (confreg[1] >> 2) & 1);
 		} else if (i==1) { /* Voltages */
 			/* Are we using thermistors? */
 			if (*devid == 0xE9) { /* PC87366 */
@@ -1071,14 +1070,12 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
 				confreg[3] = superio_inb(sioaddr, 0x25);
 
 				if (confreg[2] & 0x40) {
-					printk(KERN_INFO "pc87360: Using "
-					       "thermistors for temperature "
-					       "monitoring\n");
+					pr_info("Using thermistors for "
+						"temperature monitoring\n");
 				}
 				if (confreg[3] & 0xE0) {
-					printk(KERN_INFO "pc87360: VID "
-					       "inputs routed (mode %u)\n",
-					       confreg[3] >> 5);
+					pr_info("VID inputs routed (mode %u)\n",
+						confreg[3] >> 5);
 				}
 			}
 		}
@@ -1616,7 +1613,7 @@ static int __init pc87360_device_add(unsigned short address)
 	pdev = platform_device_alloc("pc87360", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "pc87360: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
@@ -1639,15 +1636,13 @@ static int __init pc87360_device_add(unsigned short address)
 
 	err = platform_device_add_resources(pdev, res, res_count);
 	if (err) {
-		printk(KERN_ERR "pc87360: Device resources addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resources addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "pc87360: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
@@ -1666,8 +1661,7 @@ static int __init pc87360_init(void)
 
 	if (pc87360_find(0x2e, &devid, extra_isa)
 	 && pc87360_find(0x4e, &devid, extra_isa)) {
-		printk(KERN_WARNING "pc87360: PC8736x not detected, "
-		       "module not inserted.\n");
+		pr_warn("PC8736x not detected, module not inserted\n");
 		return -ENODEV;
 	}
 
@@ -1680,8 +1674,7 @@ static int __init pc87360_init(void)
 	}
 
 	if (address == 0x0000) {
-		printk(KERN_WARNING "pc87360: No active logical device, "
-		       "module not inserted.\n");
+		pr_warn("No active logical device, module not inserted\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
index 9ec4daaf6ca6..8da2181630b1 100644
--- a/drivers/hwmon/pc87427.c
+++ b/drivers/hwmon/pc87427.c
@@ -22,6 +22,8 @@
  *  mode, and voltages aren't supported at all.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1077,7 +1079,7 @@ static int __devinit pc87427_probe(struct platform_device *pdev)
 	data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL);
 	if (!data) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Out of memory\n");
+		pr_err("Out of memory\n");
 		goto exit;
 	}
 
@@ -1196,28 +1198,26 @@ static int __init pc87427_device_add(const struct pc87427_sio_data *sio_data)
 	pdev = platform_device_alloc(DRVNAME, res[0].start);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, res, res_count);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct pc87427_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
@@ -1249,23 +1249,23 @@ static int __init pc87427_find(int sioaddr, struct pc87427_sio_data *sio_data)
 
 		val = superio_inb(sioaddr, SIOREG_ACT);
 		if (!(val & 0x01)) {
-			printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
-			       "not activated\n", logdev[i]);
+			pr_info("Logical device 0x%02x not activated\n",
+				logdev[i]);
 			continue;
 		}
 
 		val = superio_inb(sioaddr, SIOREG_MAP);
 		if (val & 0x01) {
-			printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
-			       "is memory-mapped, can't use\n", logdev[i]);
+			pr_warn("Logical device 0x%02x is memory-mapped, "
+				"can't use\n", logdev[i]);
 			continue;
 		}
 
 		val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
 		    | superio_inb(sioaddr, SIOREG_IOBASE + 1);
 		if (!val) {
-			printk(KERN_INFO DRVNAME ": I/O base address not set "
-			       "for logical device 0x%02x\n", logdev[i]);
+			pr_info("I/O base address not set for logical device "
+				"0x%02x\n", logdev[i]);
 			continue;
 		}
 		sio_data->address[i] = val;
diff --git a/drivers/hwmon/pcf8591.c b/drivers/hwmon/pcf8591.c
index dc7259d69812..731b09af76b9 100644
--- a/drivers/hwmon/pcf8591.c
+++ b/drivers/hwmon/pcf8591.c
@@ -18,6 +18,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -290,8 +292,7 @@ static struct i2c_driver pcf8591_driver = {
 static int __init pcf8591_init(void)
 {
 	if (input_mode < 0 || input_mode > 3) {
-		printk(KERN_WARNING "pcf8591: invalid input_mode (%d)\n",
-		       input_mode);
+		pr_warn("invalid input_mode (%d)\n", input_mode);
 		input_mode = 0;
 	}
 	return i2c_add_driver(&pcf8591_driver);
diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
index 0798210590bc..21c817d98123 100644
--- a/drivers/hwmon/pkgtemp.c
+++ b/drivers/hwmon/pkgtemp.c
@@ -20,6 +20,8 @@
  * 02110-1301 USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -303,7 +305,7 @@ static int __cpuinit pkgtemp_device_add(unsigned int cpu)
 	pdev = platform_device_alloc(DRVNAME, cpu);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
@@ -315,8 +317,7 @@ static int __cpuinit pkgtemp_device_add(unsigned int cpu)
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_free;
 	}
 
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index 05248f2d7581..92b42db43bcf 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -234,7 +234,6 @@ static int s3c_hwmon_create_attr(struct device *dev,
 	attr->index = channel;
 	attr->dev_attr.attr.name  = attrs->in_name;
 	attr->dev_attr.attr.mode  = S_IRUGO;
-	attr->dev_attr.attr.owner = THIS_MODULE;
 	attr->dev_attr.show = s3c_hwmon_ch_show;
 
 	ret =  device_create_file(dev, &attr->dev_attr);
@@ -252,7 +251,6 @@ static int s3c_hwmon_create_attr(struct device *dev,
 		attr->index = channel;
 		attr->dev_attr.attr.name  = attrs->label_name;
 		attr->dev_attr.attr.mode  = S_IRUGO;
-		attr->dev_attr.attr.owner = THIS_MODULE;
 		attr->dev_attr.show = s3c_hwmon_label_show;
 
 		ret = device_create_file(dev, &attr->dev_attr);
diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
new file mode 100644
index 000000000000..1c8c9812f244
--- /dev/null
+++ b/drivers/hwmon/sht21.c
@@ -0,0 +1,307 @@
+/* Sensirion SHT21 humidity and temperature sensor driver
+ *
+ * Copyright (C) 2010 Urs Fleisch <urs.fleisch@sensirion.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Data sheet available (5/2010) at
+ * http://www.sensirion.com/en/pdf/product_information/Datasheet-humidity-sensor-SHT21.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+
+/* I2C command bytes */
+#define SHT21_TRIG_T_MEASUREMENT_HM  0xe3
+#define SHT21_TRIG_RH_MEASUREMENT_HM 0xe5
+
+/**
+ * struct sht21 - SHT21 device specific data
+ * @hwmon_dev: device registered with hwmon
+ * @lock: mutex to protect measurement values
+ * @valid: only 0 before first measurement is taken
+ * @last_update: time of last update (jiffies)
+ * @temperature: cached temperature measurement value
+ * @humidity: cached humidity measurement value
+ */
+struct sht21 {
+	struct device *hwmon_dev;
+	struct mutex lock;
+	char valid;
+	unsigned long last_update;
+	int temperature;
+	int humidity;
+};
+
+/**
+ * sht21_temp_ticks_to_millicelsius() - convert raw temperature ticks to
+ * milli celsius
+ * @ticks: temperature ticks value received from sensor
+ */
+static inline int sht21_temp_ticks_to_millicelsius(int ticks)
+{
+	ticks &= ~0x0003; /* clear status bits */
+	/*
+	 * Formula T = -46.85 + 175.72 * ST / 2^16 from data sheet 6.2,
+	 * optimized for integer fixed point (3 digits) arithmetic
+	 */
+	return ((21965 * ticks) >> 13) - 46850;
+}
+
+/**
+ * sht21_rh_ticks_to_per_cent_mille() - convert raw humidity ticks to
+ * one-thousandths of a percent relative humidity
+ * @ticks: humidity ticks value received from sensor
+ */
+static inline int sht21_rh_ticks_to_per_cent_mille(int ticks)
+{
+	ticks &= ~0x0003; /* clear status bits */
+	/*
+	 * Formula RH = -6 + 125 * SRH / 2^16 from data sheet 6.1,
+	 * optimized for integer fixed point (3 digits) arithmetic
+	 */
+	return ((15625 * ticks) >> 13) - 6000;
+}
+
+/**
+ * sht21_read_word_data() - read word from register
+ * @client: I2C client device
+ * @reg: I2C command byte
+ *
+ * Returns value, negative errno on error.
+ */
+static inline int sht21_read_word_data(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_word_data(client, reg);
+	if (ret < 0)
+		return ret;
+	/*
+	 * SMBus specifies low byte first, but the SHT21 returns MSB
+	 * first, so we have to swab16 the values
+	 */
+	return swab16(ret);
+}
+
+/**
+ * sht21_update_measurements() - get updated measurements from device
+ * @client: I2C client device
+ *
+ * Returns 0 on success, else negative errno.
+ */
+static int sht21_update_measurements(struct i2c_client *client)
+{
+	int ret = 0;
+	struct sht21 *sht21 = i2c_get_clientdata(client);
+
+	mutex_lock(&sht21->lock);
+	/*
+	 * Data sheet 2.4:
+	 * SHT2x should not be active for more than 10% of the time - e.g.
+	 * maximum two measurements per second at 12bit accuracy shall be made.
+	 */
+	if (time_after(jiffies, sht21->last_update + HZ / 2) || !sht21->valid) {
+		ret = sht21_read_word_data(client, SHT21_TRIG_T_MEASUREMENT_HM);
+		if (ret < 0)
+			goto out;
+		sht21->temperature = sht21_temp_ticks_to_millicelsius(ret);
+		ret = sht21_read_word_data(client,
+					SHT21_TRIG_RH_MEASUREMENT_HM);
+		if (ret < 0)
+			goto out;
+		sht21->humidity = sht21_rh_ticks_to_per_cent_mille(ret);
+		sht21->last_update = jiffies;
+		sht21->valid = 1;
+	}
+out:
+	mutex_unlock(&sht21->lock);
+
+	return ret >= 0 ? 0 : ret;
+}
+
+/**
+ * sht21_show_temperature() - show temperature measurement value in sysfs
+ * @dev: device
+ * @attr: device attribute
+ * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
+ *
+ * Will be called on read access to temp1_input sysfs attribute.
+ * Returns number of bytes written into buffer, negative errno on error.
+ */
+static ssize_t sht21_show_temperature(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sht21 *sht21 = i2c_get_clientdata(client);
+	int ret = sht21_update_measurements(client);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", sht21->temperature);
+}
+
+/**
+ * sht21_show_humidity() - show humidity measurement value in sysfs
+ * @dev: device
+ * @attr: device attribute
+ * @buf: sysfs buffer (PAGE_SIZE) where measurement values are written to
+ *
+ * Will be called on read access to humidity1_input sysfs attribute.
+ * Returns number of bytes written into buffer, negative errno on error.
+ */
+static ssize_t sht21_show_humidity(struct device *dev,
+	struct device_attribute *attr,
+	char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct sht21 *sht21 = i2c_get_clientdata(client);
+	int ret = sht21_update_measurements(client);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%d\n", sht21->humidity);
+}
+
+/* sysfs attributes */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sht21_show_temperature,
+	NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input, S_IRUGO, sht21_show_humidity,
+	NULL, 0);
+
+static struct attribute *sht21_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_humidity1_input.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group sht21_attr_group = {
+	.attrs = sht21_attributes,
+};
+
+/**
+ * sht21_probe() - probe device
+ * @client: I2C client device
+ * @id: device ID
+ *
+ * Called by the I2C core when an entry in the ID table matches a
+ * device's name.
+ * Returns 0 on success.
+ */
+static int __devinit sht21_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct sht21 *sht21;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(&client->dev,
+			"adapter does not support SMBus word transactions\n");
+		return -ENODEV;
+	}
+
+	sht21 = kzalloc(sizeof(*sht21), GFP_KERNEL);
+	if (!sht21) {
+		dev_dbg(&client->dev, "kzalloc failed\n");
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(client, sht21);
+
+	mutex_init(&sht21->lock);
+
+	err = sysfs_create_group(&client->dev.kobj, &sht21_attr_group);
+	if (err) {
+		dev_dbg(&client->dev, "could not create sysfs files\n");
+		goto fail_free;
+	}
+	sht21->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(sht21->hwmon_dev)) {
+		dev_dbg(&client->dev, "unable to register hwmon device\n");
+		err = PTR_ERR(sht21->hwmon_dev);
+		goto fail_remove_sysfs;
+	}
+
+	dev_info(&client->dev, "initialized\n");
+
+	return 0;
+
+fail_remove_sysfs:
+	sysfs_remove_group(&client->dev.kobj, &sht21_attr_group);
+fail_free:
+	kfree(sht21);
+
+	return err;
+}
+
+/**
+ * sht21_remove() - remove device
+ * @client: I2C client device
+ */
+static int __devexit sht21_remove(struct i2c_client *client)
+{
+	struct sht21 *sht21 = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(sht21->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &sht21_attr_group);
+	kfree(sht21);
+
+	return 0;
+}
+
+/* Device ID table */
+static const struct i2c_device_id sht21_id[] = {
+	{ "sht21", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sht21_id);
+
+static struct i2c_driver sht21_driver = {
+	.driver.name = "sht21",
+	.probe       = sht21_probe,
+	.remove      = __devexit_p(sht21_remove),
+	.id_table    = sht21_id,
+};
+
+/**
+ * sht21_init() - initialize driver
+ *
+ * Called when kernel is booted or module is inserted.
+ * Returns 0 on success.
+ */
+static int __init sht21_init(void)
+{
+	return i2c_add_driver(&sht21_driver);
+}
+module_init(sht21_init);
+
+/**
+ * sht21_init() - clean up driver
+ *
+ * Called when module is removed.
+ */
+static void __exit sht21_exit(void)
+{
+	i2c_del_driver(&sht21_driver);
+}
+module_exit(sht21_exit);
+
+MODULE_AUTHOR("Urs Fleisch <urs.fleisch@sensirion.com>");
+MODULE_DESCRIPTION("Sensirion SHT21 humidity and temperature sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 79c2931e3008..47d7ce9af8fb 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -50,6 +50,8 @@
 	 735		0008		0735
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
@@ -735,21 +737,19 @@ static int __devinit sis5595_device_add(unsigned short address)
 	pdev = platform_device_alloc("sis5595", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "sis5595: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR "sis5595: Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "sis5595: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index f46d936c12da..9fb7516e6f45 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -26,6 +26,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
@@ -311,21 +313,19 @@ static int __init smsc47b397_device_add(unsigned short address)
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
@@ -367,8 +367,7 @@ static int __init smsc47b397_find(unsigned short *addr)
 	*addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
 		 |  superio_inb(SUPERIO_REG_BASE_LSB);
 
-	printk(KERN_INFO DRVNAME ": found SMSC %s "
-		"(base address 0x%04x, revision %u)\n",
+	pr_info("found SMSC %s (base address 0x%04x, revision %u)\n",
 		name, *addr, rev);
 
 	superio_exit();
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 8fa462f2b570..f44a89aac381 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -26,6 +26,8 @@
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
@@ -435,30 +437,29 @@ static int __init smsc47m1_find(unsigned short *addr,
 	 */
 	switch (val) {
 	case 0x51:
-		pr_info(DRVNAME ": Found SMSC LPC47B27x\n");
+		pr_info("Found SMSC LPC47B27x\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x59:
-		pr_info(DRVNAME ": Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
+		pr_info("Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x5F:
-		pr_info(DRVNAME ": Found SMSC LPC47M14x\n");
+		pr_info("Found SMSC LPC47M14x\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x60:
-		pr_info(DRVNAME ": Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
+		pr_info("Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
 		sio_data->type = smsc47m1;
 		break;
 	case 0x6B:
 		if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
-			pr_debug(DRVNAME ": "
-				 "Found SMSC LPC47M233, unsupported\n");
+			pr_debug("Found SMSC LPC47M233, unsupported\n");
 			superio_exit();
 			return -ENODEV;
 		}
 
-		pr_info(DRVNAME ": Found SMSC LPC47M292\n");
+		pr_info("Found SMSC LPC47M292\n");
 		sio_data->type = smsc47m2;
 		break;
 	default:
@@ -470,7 +471,7 @@ static int __init smsc47m1_find(unsigned short *addr,
 	*addr = (superio_inb(SUPERIO_REG_BASE) << 8)
 	      |  superio_inb(SUPERIO_REG_BASE + 1);
 	if (*addr == 0) {
-		pr_info(DRVNAME ": Device address not set, will not use\n");
+		pr_info("Device address not set, will not use\n");
 		superio_exit();
 		return -ENODEV;
 	}
@@ -479,7 +480,7 @@ static int __init smsc47m1_find(unsigned short *addr,
 	 * Compaq Presario S4000NX) */
 	sio_data->activate = superio_inb(SUPERIO_REG_ACT);
 	if ((sio_data->activate & 0x01) == 0) {
-		pr_info(DRVNAME ": Enabling device\n");
+		pr_info("Enabling device\n");
 		superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01);
 	}
 
@@ -494,7 +495,7 @@ static void smsc47m1_restore(const struct smsc47m1_sio_data *sio_data)
 		superio_enter();
 		superio_select();
 
-		pr_info(DRVNAME ": Disabling device\n");
+		pr_info("Disabling device\n");
 		superio_outb(SUPERIO_REG_ACT, sio_data->activate);
 
 		superio_exit();
@@ -823,28 +824,26 @@ static int __init smsc47m1_device_add(unsigned short address,
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct smsc47m1_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c
index ec7fad747adc..0d18de424c66 100644
--- a/drivers/hwmon/via-cputemp.c
+++ b/drivers/hwmon/via-cputemp.c
@@ -21,6 +21,8 @@
  * 02110-1301 USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -202,7 +204,7 @@ static int __cpuinit via_cputemp_device_add(unsigned int cpu)
 	pdev = platform_device_alloc(DRVNAME, cpu);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
@@ -214,8 +216,7 @@ static int __cpuinit via_cputemp_device_add(unsigned int cpu)
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_free;
 	}
 
@@ -237,13 +238,16 @@ exit:
 
 static void __cpuinit via_cputemp_device_remove(unsigned int cpu)
 {
-	struct pdev_entry *p, *n;
+	struct pdev_entry *p;
+
 	mutex_lock(&pdev_list_mutex);
-	list_for_each_entry_safe(p, n, &pdev_list, list) {
+	list_for_each_entry(p, &pdev_list, list) {
 		if (p->cpu == cpu) {
 			platform_device_unregister(p->pdev);
 			list_del(&p->list);
+			mutex_unlock(&pdev_list_mutex);
 			kfree(p);
+			return;
 		}
 	}
 	mutex_unlock(&pdev_list_mutex);
@@ -273,7 +277,6 @@ static struct notifier_block via_cputemp_cpu_notifier __refdata = {
 static int __init via_cputemp_init(void)
 {
 	int i, err;
-	struct pdev_entry *p, *n;
 
 	if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) {
 		printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n");
@@ -295,33 +298,27 @@ static int __init via_cputemp_init(void)
 			continue;
 
 		if (c->x86_model > 0x0f) {
-			printk(KERN_WARNING DRVNAME ": Unknown CPU "
-				"model 0x%x\n", c->x86_model);
+			pr_warn("Unknown CPU model 0x%x\n", c->x86_model);
 			continue;
 		}
 
-		err = via_cputemp_device_add(i);
-		if (err)
-			goto exit_devices_unreg;
+		via_cputemp_device_add(i);
 	}
+
+#ifndef CONFIG_HOTPLUG_CPU
 	if (list_empty(&pdev_list)) {
 		err = -ENODEV;
 		goto exit_driver_unreg;
 	}
+#endif
 
 	register_hotcpu_notifier(&via_cputemp_cpu_notifier);
 	return 0;
 
-exit_devices_unreg:
-	mutex_lock(&pdev_list_mutex);
-	list_for_each_entry_safe(p, n, &pdev_list, list) {
-		platform_device_unregister(p->pdev);
-		list_del(&p->list);
-		kfree(p);
-	}
-	mutex_unlock(&pdev_list_mutex);
+#ifndef CONFIG_HOTPLUG_CPU
 exit_driver_unreg:
 	platform_driver_unregister(&via_cputemp_driver);
+#endif
 exit:
 	return err;
 }
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index f397ce7ad598..25e91665a0a2 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -30,6 +30,8 @@
     Warning - only supports a single device.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
@@ -687,6 +689,13 @@ static int __devexit via686a_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static void via686a_update_fan_div(struct via686a_data *data)
+{
+	int reg = via686a_read_value(data, VIA686A_REG_FANDIV);
+	data->fan_div[0] = (reg >> 4) & 0x03;
+	data->fan_div[1] = reg >> 6;
+}
+
 static void __devinit via686a_init_device(struct via686a_data *data)
 {
 	u8 reg;
@@ -700,6 +709,9 @@ static void __devinit via686a_init_device(struct via686a_data *data)
 	via686a_write_value(data, VIA686A_REG_TEMP_MODE,
 			    (reg & ~VIA686A_TEMP_MODE_MASK)
 			    | VIA686A_TEMP_MODE_CONTINUOUS);
+
+	/* Pre-read fan clock divisor values */
+	via686a_update_fan_div(data);
 }
 
 static struct via686a_data *via686a_update_device(struct device *dev)
@@ -751,9 +763,7 @@ static struct via686a_data *via686a_update_device(struct device *dev)
 		    (via686a_read_value(data, VIA686A_REG_TEMP_LOW23) &
 		     0xc0) >> 6;
 
-		i = via686a_read_value(data, VIA686A_REG_FANDIV);
-		data->fan_div[0] = (i >> 4) & 0x03;
-		data->fan_div[1] = i >> 6;
+		via686a_update_fan_div(data);
 		data->alarms =
 		    via686a_read_value(data,
 				       VIA686A_REG_ALARM1) |
@@ -791,21 +801,19 @@ static int __devinit via686a_device_add(unsigned short address)
 	pdev = platform_device_alloc("via686a", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "via686a: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR "via686a: Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "via686a: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c
index ae33bbb577c7..49163d48e966 100644
--- a/drivers/hwmon/vt1211.c
+++ b/drivers/hwmon/vt1211.c
@@ -21,6 +21,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1254,8 +1256,7 @@ static int __init vt1211_device_add(unsigned short address)
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed (%d)\n",
-		       err);
+		pr_err("Device allocation failed (%d)\n", err);
 		goto EXIT;
 	}
 
@@ -1266,15 +1267,13 @@ static int __init vt1211_device_add(unsigned short address)
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto EXIT_DEV_PUT;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto EXIT_DEV_PUT;
 	}
 
@@ -1301,23 +1300,20 @@ static int __init vt1211_find(int sio_cip, unsigned short *address)
 	superio_select(sio_cip, SIO_VT1211_LDN_HWMON);
 
 	if ((superio_inb(sio_cip, SIO_VT1211_ACTIVE) & 1) == 0) {
-		printk(KERN_WARNING DRVNAME ": HW monitor is disabled, "
-		       "skipping\n");
+		pr_warn("HW monitor is disabled, skipping\n");
 		goto EXIT;
 	}
 
 	*address = ((superio_inb(sio_cip, SIO_VT1211_BADDR) << 8) |
 		    (superio_inb(sio_cip, SIO_VT1211_BADDR + 1))) & 0xff00;
 	if (*address == 0) {
-		printk(KERN_WARNING DRVNAME ": Base address is not set, "
-		       "skipping\n");
+		pr_warn("Base address is not set, skipping\n");
 		goto EXIT;
 	}
 
 	err = 0;
-	printk(KERN_INFO DRVNAME ": Found VT1211 chip at 0x%04x, "
-	       "revision %u\n", *address,
-	       superio_inb(sio_cip, SIO_VT1211_DEVREV));
+	pr_info("Found VT1211 chip at 0x%04x, revision %u\n",
+		*address, superio_inb(sio_cip, SIO_VT1211_DEVREV));
 
 EXIT:
 	superio_exit(sio_cip);
@@ -1336,15 +1332,15 @@ static int __init vt1211_init(void)
 
 	if ((uch_config < -1) || (uch_config > 31)) {
 		err = -EINVAL;
-		printk(KERN_WARNING DRVNAME ": Invalid UCH configuration %d. "
-		       "Choose a value between 0 and 31.\n", uch_config);
+		pr_warn("Invalid UCH configuration %d. "
+			"Choose a value between 0 and 31.\n", uch_config);
 	  goto EXIT;
 	}
 
 	if ((int_mode < -1) || (int_mode > 0)) {
 		err = -EINVAL;
-		printk(KERN_WARNING DRVNAME ": Invalid interrupt mode %d. "
-		       "Only mode 0 is supported.\n", int_mode);
+		pr_warn("Invalid interrupt mode %d. "
+			"Only mode 0 is supported.\n", int_mode);
 	  goto EXIT;
 	}
 
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index e6078c9f0e27..db3b2e8d2a67 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -24,6 +24,8 @@
 /* Supports VIA VT8231 South Bridge embedded sensors
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -902,21 +904,19 @@ static int __devinit vt8231_device_add(unsigned short address)
 	pdev = platform_device_alloc("vt8231", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "vt8231: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR "vt8231: Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "vt8231: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 072c58008a63..073eabedc432 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -42,6 +42,8 @@
     w83667hg-b   9      5       3       3      0xb350 0xc1    0x5ca3
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1668,8 +1670,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 		break;
 	default:
 		if (val != 0xffff)
-			pr_debug(DRVNAME ": unsupported chip ID: 0x%04x\n",
-				 val);
+			pr_debug("unsupported chip ID: 0x%04x\n", val);
 		superio_exit(sioaddr);
 		return -ENODEV;
 	}
@@ -1680,8 +1681,7 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 	    | superio_inb(sioaddr, SIO_REG_ADDR + 1);
 	*addr = val & IOREGION_ALIGNMENT;
 	if (*addr == 0) {
-		printk(KERN_ERR DRVNAME ": Refusing to enable a Super-I/O "
-		       "device with a base I/O port 0.\n");
+		pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
 		superio_exit(sioaddr);
 		return -ENODEV;
 	}
@@ -1689,13 +1689,12 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 	/* Activate logical device if needed */
 	val = superio_inb(sioaddr, SIO_REG_ENABLE);
 	if (!(val & 0x01)) {
-		printk(KERN_WARNING DRVNAME ": Forcibly enabling Super-I/O. "
-		       "Sensor is probably unusable.\n");
+		pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
 		superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
 	}
 
 	superio_exit(sioaddr);
-	pr_info(DRVNAME ": Found %s chip at %#x\n", sio_name, *addr);
+	pr_info("Found %s chip at %#x\n", sio_name, *addr);
 	sio_data->sioreg = sioaddr;
 
 	return 0;
@@ -1729,14 +1728,14 @@ static int __init sensors_w83627ehf_init(void)
 
 	if (!(pdev = platform_device_alloc(DRVNAME, address))) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit_unregister;
 	}
 
 	err = platform_device_add_data(pdev, &sio_data,
 				       sizeof(struct w83627ehf_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
@@ -1752,16 +1751,14 @@ static int __init sensors_w83627ehf_init(void)
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	/* platform_device_add calls probe() */
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 38e280523071..bde50e34d013 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -39,6 +39,8 @@
     supported yet.
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1166,14 +1168,13 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr,
 	       superio_inb(sio_data, WINB_BASE_REG + 1);
 	*addr = val & WINB_ALIGNMENT;
 	if (*addr == 0) {
-		printk(KERN_WARNING DRVNAME ": Base address not set, "
-		       "skipping\n");
+		pr_warn("Base address not set, skipping\n");
 		goto exit;
 	}
 
 	val = superio_inb(sio_data, WINB_ACT_REG);
 	if (!(val & 0x01)) {
-		printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
+		pr_warn("Enabling HWM logical device\n");
 		superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
 	}
 
@@ -1789,28 +1790,26 @@ static int __init w83627hf_device_add(unsigned short address,
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct w83627hf_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index c84b9b4e6960..eed43a008be1 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -33,6 +33,8 @@
 
 */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1798,8 +1800,7 @@ w83781d_isa_found(unsigned short address)
 	 * individually for the probing phase. */
 	for (port = address; port < address + W83781D_EXTENT; port++) {
 		if (!request_region(port, 1, "w83781d")) {
-			pr_debug("w83781d: Failed to request port 0x%x\n",
-				 port);
+			pr_debug("Failed to request port 0x%x\n", port);
 			goto release;
 		}
 	}
@@ -1811,7 +1812,7 @@ w83781d_isa_found(unsigned short address)
 	if (inb_p(address + 2) != val
 	 || inb_p(address + 3) != val
 	 || inb_p(address + 7) != val) {
-		pr_debug("w83781d: Detection failed at step 1\n");
+		pr_debug("Detection failed at step %d\n", 1);
 		goto release;
 	}
 #undef REALLY_SLOW_IO
@@ -1820,14 +1821,14 @@ w83781d_isa_found(unsigned short address)
 	   MSB (busy flag) should be clear initially, set after the write. */
 	save = inb_p(address + W83781D_ADDR_REG_OFFSET);
 	if (save & 0x80) {
-		pr_debug("w83781d: Detection failed at step 2\n");
+		pr_debug("Detection failed at step %d\n", 2);
 		goto release;
 	}
 	val = ~save & 0x7f;
 	outb_p(val, address + W83781D_ADDR_REG_OFFSET);
 	if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) {
 		outb_p(save, address + W83781D_ADDR_REG_OFFSET);
-		pr_debug("w83781d: Detection failed at step 3\n");
+		pr_debug("Detection failed at step %d\n", 3);
 		goto release;
 	}
 
@@ -1835,7 +1836,7 @@ w83781d_isa_found(unsigned short address)
 	outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET);
 	val = inb_p(address + W83781D_DATA_REG_OFFSET);
 	if (val & 0x80) {
-		pr_debug("w83781d: Detection failed at step 4\n");
+		pr_debug("Detection failed at step %d\n", 4);
 		goto release;
 	}
 	outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET);
@@ -1844,19 +1845,19 @@ w83781d_isa_found(unsigned short address)
 	val = inb_p(address + W83781D_DATA_REG_OFFSET);
 	if ((!(save & 0x80) && (val != 0xa3))
 	 || ((save & 0x80) && (val != 0x5c))) {
-		pr_debug("w83781d: Detection failed at step 5\n");
+		pr_debug("Detection failed at step %d\n", 5);
 		goto release;
 	}
 	outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET);
 	val = inb_p(address + W83781D_DATA_REG_OFFSET);
 	if (val < 0x03 || val > 0x77) {	/* Not a valid I2C address */
-		pr_debug("w83781d: Detection failed at step 6\n");
+		pr_debug("Detection failed at step %d\n", 6);
 		goto release;
 	}
 
 	/* The busy flag should be clear again */
 	if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) {
-		pr_debug("w83781d: Detection failed at step 7\n");
+		pr_debug("Detection failed at step %d\n", 7);
 		goto release;
 	}
 
@@ -1871,7 +1872,7 @@ w83781d_isa_found(unsigned short address)
 		found = 1;
 
 	if (found)
-		pr_info("w83781d: Found a %s chip at %#x\n",
+		pr_info("Found a %s chip at %#x\n",
 			val == 0x30 ? "W83782D" : "W83781D", (int)address);
 
  release:
@@ -1894,21 +1895,19 @@ w83781d_isa_device_add(unsigned short address)
 	pdev = platform_device_alloc("w83781d", address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR "w83781d: Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR "w83781d: Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR "w83781d: Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 679718e6b017..63841f8cec07 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -691,7 +691,7 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
-show_regs_chassis(struct device *dev, struct device_attribute *attr,
+show_chassis(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
 	struct w83792d_data *data = w83792d_update_device(dev);
@@ -699,6 +699,16 @@ show_regs_chassis(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+show_regs_chassis(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	dev_warn(dev,
+		 "Attribute %s is deprecated, use intrusion0_alarm instead\n",
+		 "chassis");
+	return show_chassis(dev, attr, buf);
+}
+
+static ssize_t
 show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct w83792d_data *data = w83792d_update_device(dev);
@@ -706,7 +716,7 @@ show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 static ssize_t
-store_chassis_clear(struct device *dev, struct device_attribute *attr,
+store_chassis_clear_legacy(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -714,6 +724,10 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
 	u32 val;
 	u8 temp1 = 0, temp2 = 0;
 
+	dev_warn(dev,
+		 "Attribute %s is deprecated, use intrusion0_alarm instead\n",
+		 "chassis_clear");
+
 	val = simple_strtoul(buf, NULL, 10);
 	mutex_lock(&data->update_lock);
 	data->chassis_clear = SENSORS_LIMIT(val, 0 ,1);
@@ -726,6 +740,27 @@ store_chassis_clear(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static ssize_t
+store_chassis_clear(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83792d_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	u8 reg;
+
+	if (strict_strtoul(buf, 10, &val) || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR);
+	w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80);
+	data->valid = 0;		/* Force cache refresh */
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
 /* For Smart Fan I / Thermal Cruise */
 static ssize_t
 show_thermal_cruise(struct device *dev, struct device_attribute *attr,
@@ -1012,7 +1047,9 @@ static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 22);
 static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 23);
 static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
 static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
-			show_chassis_clear, store_chassis_clear);
+			show_chassis_clear, store_chassis_clear_legacy);
+static DEVICE_ATTR(intrusion0_alarm, S_IRUGO | S_IWUSR,
+			show_chassis, store_chassis_clear);
 static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0);
 static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1);
 static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2);
@@ -1214,6 +1251,7 @@ static struct attribute *w83792d_attributes[] = {
 	&dev_attr_alarms.attr,
 	&dev_attr_chassis.attr,
 	&dev_attr_chassis_clear.attr,
+	&dev_attr_intrusion0_alarm.attr,
 	&sensor_dev_attr_tolerance1.dev_attr.attr,
 	&sensor_dev_attr_thermal_cruise1.dev_attr.attr,
 	&sensor_dev_attr_tolerance2.dev_attr.attr,
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 8e540ada47d2..e3bdedfb5347 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -51,7 +51,6 @@
 #define WATCHDOG_TIMEOUT 2	/* 2 minute default timeout */
 
 /* Addresses to scan */
-static DEFINE_MUTEX(watchdog_mutex);
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
 						I2C_CLIENT_END };
 
@@ -421,14 +420,17 @@ store_beep_enable(struct device *dev, struct device_attribute *attr,
 
 /* Write any value to clear chassis alarm */
 static ssize_t
-store_chassis_clear(struct device *dev,
-		    struct device_attribute *attr, const char *buf,
-		    size_t count)
+store_chassis_clear_legacy(struct device *dev,
+			   struct device_attribute *attr, const char *buf,
+			   size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83793_data *data = i2c_get_clientdata(client);
 	u8 val;
 
+	dev_warn(dev, "Attribute chassis is deprecated, "
+		 "use intrusion0_alarm instead\n");
+
 	mutex_lock(&data->update_lock);
 	val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
 	val |= 0x80;
@@ -437,6 +439,28 @@ store_chassis_clear(struct device *dev,
 	return count;
 }
 
+/* Write 0 to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+		    struct device_attribute *attr, const char *buf,
+		    size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+	u8 reg;
+
+	if (strict_strtoul(buf, 10, &val) || val != 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	reg = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
+	w83793_write_value(client, W83793_REG_CLR_CHASSIS, reg | 0x80);
+	data->valid = 0;		/* Force cache refresh */
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
 #define FAN_INPUT			0
 #define FAN_MIN				1
 static ssize_t
@@ -1102,6 +1126,8 @@ static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm);
 
 static struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_chassis_clear_legacy, ALARM_STATUS, 30),
+	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 30),
 	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
 		      store_beep_enable, NOT_USED, NOT_USED),
@@ -1323,7 +1349,7 @@ static ssize_t watchdog_write(struct file *filp, const char __user *buf,
 static long watchdog_ioctl(struct file *filp, unsigned int cmd,
 			   unsigned long arg)
 {
-	static struct watchdog_info ident = {
+	struct watchdog_info ident = {
 		.options = WDIOF_KEEPALIVEPING |
 			   WDIOF_SETTIMEOUT |
 			   WDIOF_CARDRESET,
@@ -1333,7 +1359,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
 	int val, ret = 0;
 	struct w83793_data *data = filp->private_data;
 
-	mutex_lock(&watchdog_mutex);
 	switch (cmd) {
 	case WDIOC_GETSUPPORT:
 		if (!nowayout)
@@ -1387,7 +1412,6 @@ static long watchdog_ioctl(struct file *filp, unsigned int cmd,
 	default:
 		ret = -ENOTTY;
 	}
-	mutex_unlock(&watchdog_mutex);
 	return ret;
 }
 
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 1d840aa83782..845232d7f611 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -165,10 +165,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_VID_CTRL		0x6A
 
+#define W83795_REG_ALARM_CTRL		0x40
+#define ALARM_CTRL_RTSACS		(1 << 7)
 #define W83795_REG_ALARM(index)		(0x41 + (index))
+#define W83795_REG_CLR_CHASSIS		0x4D
 #define W83795_REG_BEEP(index)		(0x50 + (index))
 
-#define W83795_REG_CLR_CHASSIS		0x4D
+#define W83795_REG_OVT_CFG		0x58
+#define OVT_CFG_SEL			(1 << 7)
 
 
 #define W83795_REG_FCMS1		0x201
@@ -178,6 +182,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_TSS(index)		(0x209 + (index))
 
+#define TSS_MAP_RESERVED		0xff
+static const u8 tss_map[4][6] = {
+	{ 0,  1,  2,  3,  4,  5},
+	{ 6,  7,  8,  9,  0,  1},
+	{10, 11, 12, 13,  2,  3},
+	{ 4,  5,  4,  5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
 #define PWM_OUTPUT			0
 #define PWM_FREQ			1
 #define PWM_START			2
@@ -369,6 +381,7 @@ struct w83795_data {
 	u8 setup_pwm[3];	/* Register value */
 
 	u8 alarms[6];		/* Register value */
+	u8 enable_beep;
 	u8 beeps[6];		/* Register value */
 
 	char valid;
@@ -445,6 +458,7 @@ static void w83795_update_limits(struct i2c_client *client)
 {
 	struct w83795_data *data = i2c_get_clientdata(client);
 	int i, limit;
+	u8 lsb;
 
 	/* Read the voltage limits */
 	for (i = 0; i < ARRAY_SIZE(data->in); i++) {
@@ -466,9 +480,8 @@ static void w83795_update_limits(struct i2c_client *client)
 	}
 
 	/* Read the fan limits */
+	lsb = 0; /* Silent false gcc warning */
 	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
-		u8 lsb;
-
 		/* Each register contains LSB for 2 fans, but we want to
 		 * read it only once to save time */
 		if ((i & 1) == 0 && (data->has_fan & (3 << i)))
@@ -499,8 +512,11 @@ static void w83795_update_limits(struct i2c_client *client)
 	}
 
 	/* Read beep settings */
-	for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
-		data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+			data->beeps[i] =
+				w83795_read(client, W83795_REG_BEEP(i));
+	}
 
 	data->valid_limits = 1;
 }
@@ -577,6 +593,7 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83795_data *data = i2c_get_clientdata(client);
 	u16 tmp;
+	u8 intrusion;
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -648,9 +665,24 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
 	}
 
-	/* update alarm */
+	/* Update intrusion and alarms
+	 * It is important to read intrusion first, because reading from
+	 * register SMI STS6 clears the interrupt status temporarily. */
+	tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+	/* Switch to interrupt status for intrusion if needed */
+	if (tmp & ALARM_CTRL_RTSACS)
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
+	intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+	/* Switch to real-time alarms */
+	w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
 	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
 		data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+	data->alarms[5] |= intrusion;
+	/* Restore original configuration if needed */
+	if (!(tmp & ALARM_CTRL_RTSACS))
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
 
 	data->last_updated = jiffies;
 	data->valid = 1;
@@ -730,6 +762,10 @@ store_chassis_clear(struct device *dev,
 	val = w83795_read(client, W83795_REG_CLR_CHASSIS);
 	val |= 0x80;
 	w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+	/* Clear status and force cache refresh */
+	w83795_read(client, W83795_REG_ALARM(5));
+	data->valid = 0;
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -857,20 +893,20 @@ show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
 	int index = sensor_attr->index;
 	u8 tmp;
 
-	if (1 == (data->pwm_fcms[0] & (1 << index))) {
+	/* Speed cruise mode */
+	if (data->pwm_fcms[0] & (1 << index)) {
 		tmp = 2;
 		goto out;
 	}
+	/* Thermal cruise or SmartFan IV mode */
 	for (tmp = 0; tmp < 6; tmp++) {
 		if (data->pwm_tfmr[tmp] & (1 << index)) {
 			tmp = 3;
 			goto out;
 		}
 	}
-	if (data->pwm_fomc & (1 << index))
-		tmp = 0;
-	else
-		tmp = 1;
+	/* Manual mode */
+	tmp = 1;
 
 out:
 	return sprintf(buf, "%u\n", tmp);
@@ -890,23 +926,21 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 
 	if (strict_strtoul(buf, 10, &val) < 0)
 		return -EINVAL;
-	if (val > 2)
+	if (val < 1 || val > 2)
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	switch (val) {
-	case 0:
 	case 1:
+		/* Clear speed cruise mode bits */
 		data->pwm_fcms[0] &= ~(1 << index);
 		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		/* Clear thermal cruise mode bits */
 		for (i = 0; i < 6; i++) {
 			data->pwm_tfmr[i] &= ~(1 << index);
 			w83795_write(client, W83795_REG_TFMR(i),
 				data->pwm_tfmr[i]);
 		}
-		data->pwm_fomc |= 1 << index;
-		data->pwm_fomc ^= val << index;
-		w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
 		break;
 	case 2:
 		data->pwm_fcms[0] |= (1 << index);
@@ -918,23 +952,60 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = to_sensor_dev_attr_2(attr)->index;
+	unsigned int mode;
+
+	if (data->pwm_fomc & (1 << index))
+		mode = 0;	/* DC */
+	else
+		mode = 1;	/* PWM */
+
+	return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+	int useful = 0, i;
+
+	for (i = 0; i < 4; i++) {
+		if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+			continue;
+		if (tss_map[i][tsrc] < 6)	/* Analog */
+			useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+		else				/* Digital */
+			useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+	}
+
+	return useful;
+}
+
+static ssize_t
 show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	struct w83795_data *data = w83795_update_pwm_config(dev);
 	int index = sensor_attr->index;
-	u8 val = index / 2;
-	u8 tmp = data->temp_src[val];
+	u8 tmp = data->temp_src[index / 2];
 
 	if (index & 1)
-		val = 4;
+		tmp >>= 4;	/* Pick high nibble */
 	else
-		val = 0;
-	tmp >>= val;
-	tmp &= 0x0f;
+		tmp &= 0x0f;	/* Pick low nibble */
 
-	return sprintf(buf, "%u\n", tmp);
+	/* Look-up the actual temperature channel number */
+	if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+		return -EINVAL;		/* Shouldn't happen */
+
+	return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
 }
 
 static ssize_t
@@ -946,12 +1017,21 @@ store_temp_src(struct device *dev, struct device_attribute *attr,
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	int index = sensor_attr->index;
-	unsigned long tmp;
+	int tmp;
+	unsigned long channel;
 	u8 val = index / 2;
 
-	if (strict_strtoul(buf, 10, &tmp) < 0)
+	if (strict_strtoul(buf, 10, &channel) < 0 ||
+	    channel < 1 || channel > 14)
+		return -EINVAL;
+
+	/* Check if request can be fulfilled */
+	for (tmp = 0; tmp < 4; tmp++) {
+		if (tss_map[tmp][index] == channel - 1)
+			break;
+	}
+	if (tmp == 4)	/* No match */
 		return -EINVAL;
-	tmp = SENSORS_LIMIT(tmp, 0, 15);
 
 	mutex_lock(&data->update_lock);
 	if (index & 1) {
@@ -1515,7 +1595,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 
 #define NOT_USED			-1
 
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
  * somewhere else in the code */
 #define SENSOR_ATTR_IN(index) {						\
 	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
@@ -1530,6 +1610,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + ((index > 14) ? 1 : 0)) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_FAN(index) {					\
 	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
 		NULL, FAN_INPUT, index - 1), \
@@ -1553,9 +1635,13 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_pwm, store_pwm, PWM_FREQ, index - 1),	 \
 	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
 		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
+		show_pwm_mode, NULL, NOT_USED, index - 1),		\
 	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
 		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_DTS(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
 		show_dts_mode, NULL, NOT_USED, index - 7),	\
@@ -1574,6 +1660,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_TEMP(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
@@ -1593,8 +1681,6 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + (index > 4 ? 11 : 17)),				\
-	SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO,	\
-		show_temp_src, store_temp_src, NOT_USED, index - 1),	\
 	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
 		show_temp_pwm_enable, store_temp_pwm_enable,		\
 		TEMP_PWM_ENABLE, index - 1),				\
@@ -1680,7 +1766,7 @@ static const struct sensor_device_attribute_2 w83795_fan[][4] = {
 	SENSOR_ATTR_FAN(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
 	SENSOR_ATTR_TEMP(1),
 	SENSOR_ATTR_TEMP(2),
 	SENSOR_ATTR_TEMP(3),
@@ -1700,7 +1786,7 @@ static const struct sensor_device_attribute_2 w83795_dts[][8] = {
 	SENSOR_ATTR_DTS(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
 	SENSOR_ATTR_PWM(1),
 	SENSOR_ATTR_PWM(2),
 	SENSOR_ATTR_PWM(3),
@@ -1711,13 +1797,24 @@ static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
 	SENSOR_ATTR_PWM(8),
 };
 
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+	SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 0),
+	SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 1),
+	SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 2),
+	SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 3),
+	SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 4),
+	SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
 static const struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 46),
-	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 46),
-	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 47),
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
 		store_fanin, FANIN_TOL, NOT_USED),
@@ -1730,6 +1827,13 @@ static const struct sensor_device_attribute_2 sda_single_files[] = {
 #endif
 };
 
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 46),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 47),
+};
+
 /*
  * Driver interface
  */
@@ -1859,6 +1963,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_in & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+			if (j == 4 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_in[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1869,18 +1975,37 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_fan & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+			if (j == 3 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_fan[i][j].dev_attr);
 			if (err)
 				return err;
 		}
 	}
 
+	for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+		j = w83795_tss_useful(data, i);
+		if (!j)
+			continue;
+		err = fn(dev, &w83795_tss[i].dev_attr);
+		if (err)
+			return err;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
 		err = fn(dev, &sda_single_files[i].dev_attr);
 		if (err)
 			return err;
 	}
 
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+			err = fn(dev, &sda_beep_files[i].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	for (i = 0; i < data->has_pwm; i++) {
 		for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
@@ -1899,6 +2024,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 #else
 		for (j = 0; j < 8; j++) {
 #endif
+			if (j == 7 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_temp[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1910,6 +2037,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 			if (!(data->has_dts & (1 << i)))
 				continue;
 			for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+				if (j == 7 && !data->enable_beep)
+					continue;
 				err = fn(dev, &w83795_dts[i][j].dev_attr);
 				if (err)
 					return err;
@@ -2049,6 +2178,18 @@ static int w83795_probe(struct i2c_client *client,
 	else
 		data->has_pwm = 2;
 
+	/* Check if BEEP pin is available */
+	if (data->chip_type == w83795g) {
+		/* The W83795G has a dedicated BEEP pin */
+		data->enable_beep = 1;
+	} else {
+		/* The W83795ADG has a shared pin for OVT# and BEEP, so you
+		 * can't have both */
+		tmp = w83795_read(client, W83795_REG_OVT_CFG);
+		if ((tmp & OVT_CFG_SEL) == 0)
+			data->enable_beep = 1;
+	}
+
 	err = w83795_handle_files(dev, device_create_file);
 	if (err)
 		goto exit_remove;