Merge branch 'drm_bridge_for_4.8' of https://github.com/boddob/linux into drm-next

This is an update to the previous drm bridge pull request. The ADV7511
driver's conversion from slave encoder to bridge meant that its users
(the rcar-du kms driver) should use the bridge interface too. This pull
request now also contains a commit that updates the rcar-du's hdmi encoder
interface from slave encoder to bridge.

The other updates are as before:

- Converts the ADV7511 i2c slave encoder driver to a bridge driver.
  Adds support for the ADV7533 bridge chip.
- Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips.

* 'drm_bridge_for_4.8' of https://github.com/boddob/linux:
  drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
  drm/bridge: tc358767: Add DPI to eDP bridge driver
  dt-bindings: tc358767: add DT documentation
  dt-bindings: drm/bridge: Update bindings for ADV7533
  drm/bridge: adv7533: Change number of DSI lanes dynamically
  drm/bridge: adv7533: Use internal timing generator
  drm/bridge: adv7533: Create a MIPI DSI device
  drm/bridge: adv7533: Initial support for ADV7533
  drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
  drm/i2c: adv7511: Move to bridge folder
  drm/i2c: adv7511: Convert to drm_bridge

16 files changed, 2046 insertions, 327 deletions

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index a141921445f4..b590e678052d 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -58,6 +58,17 @@ config DRM_SII902X
 	---help---
 	  Silicon Image sii902x bridge chip driver.
 
+config DRM_TOSHIBA_TC358767
+	tristate "Toshiba TC358767 eDP bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	---help---
+	  Toshiba TC358767 eDP bridge chip driver.
+
 source "drivers/gpu/drm/bridge/analogix/Kconfig"
 
+source "drivers/gpu/drm/bridge/adv7511/Kconfig"
+
 endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index bfec9f8cb9d2..efdb07e878f5 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -6,4 +6,6 @@ obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
+obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
new file mode 100644
index 000000000000..d2b0499ab7d7
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -0,0 +1,15 @@
+config DRM_I2C_ADV7511
+	tristate "AV7511 encoder"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+
+config DRM_I2C_ADV7533
+	bool "ADV7533 encoder"
+	depends on DRM_I2C_ADV7511
+	select DRM_MIPI_DSI
+	default y
+	help
+	  Support for the Analog Devices ADV7533 DSI to HDMI encoder.
diff --git a/drivers/gpu/drm/bridge/adv7511/Makefile b/drivers/gpu/drm/bridge/adv7511/Makefile
new file mode 100644
index 000000000000..9019327fff4c
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/Makefile
@@ -0,0 +1,3 @@
+adv7511-y := adv7511_drv.o
+adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 38515b30cedf..161c923d6162 100644
--- a/drivers/gpu/drm/i2c/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -10,6 +10,11 @@
 #define __DRM_I2C_ADV7511_H__
 
 #include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
 
 #define ADV7511_REG_CHIP_REVISION		0x00
 #define ADV7511_REG_N0				0x01
@@ -286,4 +291,102 @@ struct adv7511_video_config {
 	struct hdmi_avi_infoframe avi_infoframe;
 };
 
+enum adv7511_type {
+	ADV7511,
+	ADV7533,
+};
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+	struct i2c_client *i2c_cec;
+
+	struct regmap *regmap;
+	struct regmap *regmap_cec;
+	enum drm_connector_status status;
+	bool powered;
+
+	struct drm_display_mode curr_mode;
+
+	unsigned int f_tmds;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+
+	/* ADV7533 DSI RX related params */
+	struct device_node *host_node;
+	struct mipi_dsi_device *dsi;
+	u8 num_dsi_lanes;
+	bool use_timing_gen;
+
+	enum adv7511_type type;
+};
+
+#ifdef CONFIG_DRM_I2C_ADV7533
+void adv7533_dsi_power_on(struct adv7511 *adv);
+void adv7533_dsi_power_off(struct adv7511 *adv);
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode);
+int adv7533_patch_registers(struct adv7511 *adv);
+void adv7533_uninit_cec(struct adv7511 *adv);
+int adv7533_init_cec(struct adv7511 *adv);
+int adv7533_attach_dsi(struct adv7511 *adv);
+void adv7533_detach_dsi(struct adv7511 *adv);
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
+#else
+static inline void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_mode_set(struct adv7511 *adv,
+				    struct drm_display_mode *mode)
+{
+}
+
+static inline int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline void adv7533_uninit_cec(struct adv7511 *adv)
+{
+}
+
+static inline int adv7533_init_cec(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline void adv7533_detach_dsi(struct adv7511 *adv)
+{
+}
+
+static inline int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* __DRM_I2C_ADV7511_H__ */
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index a02112ba1c3d..ec8fb2ed3275 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -8,51 +8,17 @@
 
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/regmap.h>
+#include <linux/of_device.h>
 #include <linux/slab.h>
 
 #include <drm/drmP.h>
-#include <drm/drm_crtc_helper.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
 #include <drm/drm_edid.h>
-#include <drm/drm_encoder_slave.h>
 
 #include "adv7511.h"
 
-struct adv7511 {
-	struct i2c_client *i2c_main;
-	struct i2c_client *i2c_edid;
-
-	struct regmap *regmap;
-	struct regmap *packet_memory_regmap;
-	enum drm_connector_status status;
-	bool powered;
-
-	unsigned int f_tmds;
-
-	unsigned int current_edid_segment;
-	uint8_t edid_buf[256];
-	bool edid_read;
-
-	wait_queue_head_t wq;
-	struct drm_encoder *encoder;
-
-	bool embedded_sync;
-	enum adv7511_sync_polarity vsync_polarity;
-	enum adv7511_sync_polarity hsync_polarity;
-	bool rgb;
-
-	struct edid *edid;
-
-	struct gpio_desc *gpio_pd;
-};
-
-static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
-{
-	return to_encoder_slave(encoder)->slave_priv;
-}
-
 /* ADI recommended values for proper operation. */
 static const struct reg_sequence adv7511_fixed_registers[] = {
 	{ 0x98, 0x03 },
@@ -394,6 +360,9 @@ static void adv7511_power_on(struct adv7511 *adv7511)
 	 */
 	regcache_sync(adv7511->regmap);
 
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_on(adv7511);
+
 	adv7511->powered = true;
 }
 
@@ -405,6 +374,9 @@ static void adv7511_power_off(struct adv7511 *adv7511)
 			   ADV7511_POWER_POWER_DOWN);
 	regcache_mark_dirty(adv7511->regmap);
 
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_off(adv7511);
+
 	adv7511->powered = false;
 }
 
@@ -430,7 +402,7 @@ static bool adv7511_hpd(struct adv7511 *adv7511)
 	return false;
 }
 
-static int adv7511_irq_process(struct adv7511 *adv7511)
+static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 {
 	unsigned int irq0, irq1;
 	int ret;
@@ -446,8 +418,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511)
 	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
 	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
 
-	if (irq0 & ADV7511_INT0_HPD && adv7511->encoder)
-		drm_helper_hpd_irq_event(adv7511->encoder->dev);
+	if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
+		drm_helper_hpd_irq_event(adv7511->connector.dev);
 
 	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
 		adv7511->edid_read = true;
@@ -464,7 +436,7 @@ static irqreturn_t adv7511_irq_handler(int irq, void *devid)
 	struct adv7511 *adv7511 = devid;
 	int ret;
 
-	ret = adv7511_irq_process(adv7511);
+	ret = adv7511_irq_process(adv7511, true);
 	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
 }
 
@@ -481,7 +453,7 @@ static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
 				adv7511->edid_read, msecs_to_jiffies(timeout));
 	} else {
 		for (; timeout > 0; timeout -= 25) {
-			ret = adv7511_irq_process(adv7511);
+			ret = adv7511_irq_process(adv7511, false);
 			if (ret < 0)
 				break;
 
@@ -563,13 +535,12 @@ static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
 }
 
 /* -----------------------------------------------------------------------------
- * Encoder operations
+ * ADV75xx helpers
  */
 
-static int adv7511_get_modes(struct drm_encoder *encoder,
+static int adv7511_get_modes(struct adv7511 *adv7511,
 			     struct drm_connector *connector)
 {
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 	struct edid *edid;
 	unsigned int count;
 
@@ -606,21 +577,9 @@ static int adv7511_get_modes(struct drm_encoder *encoder,
 	return count;
 }
 
-static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
-
-	if (mode == DRM_MODE_DPMS_ON)
-		adv7511_power_on(adv7511);
-	else
-		adv7511_power_off(adv7511);
-}
-
 static enum drm_connector_status
-adv7511_encoder_detect(struct drm_encoder *encoder,
-		       struct drm_connector *connector)
+adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
 {
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 	enum drm_connector_status status;
 	unsigned int val;
 	bool hpd;
@@ -644,7 +603,7 @@ adv7511_encoder_detect(struct drm_encoder *encoder,
 	if (status == connector_status_connected && hpd && adv7511->powered) {
 		regcache_mark_dirty(adv7511->regmap);
 		adv7511_power_on(adv7511);
-		adv7511_get_modes(encoder, connector);
+		adv7511_get_modes(adv7511, connector);
 		if (adv7511->status == connector_status_connected)
 			status = connector_status_disconnected;
 	} else {
@@ -658,8 +617,8 @@ adv7511_encoder_detect(struct drm_encoder *encoder,
 	return status;
 }
 
-static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
-				      struct drm_display_mode *mode)
+static int adv7511_mode_valid(struct adv7511 *adv7511,
+			      struct drm_display_mode *mode)
 {
 	if (mode->clock > 165000)
 		return MODE_CLOCK_HIGH;
@@ -667,11 +626,10 @@ static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
 	return MODE_OK;
 }
 
-static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adj_mode)
+static void adv7511_mode_set(struct adv7511 *adv7511,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adj_mode)
 {
-	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
 	unsigned int low_refresh_rate;
 	unsigned int hsync_polarity = 0;
 	unsigned int vsync_polarity = 0;
@@ -754,6 +712,11 @@ static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
 	regmap_update_bits(adv7511->regmap, 0x17,
 		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
 
+	if (adv7511->type == ADV7533)
+		adv7533_mode_set(adv7511, adj_mode);
+
+	drm_mode_copy(&adv7511->curr_mode, adj_mode);
+
 	/*
 	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
 	 * supposed to give better results.
@@ -762,12 +725,114 @@ static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
 	adv7511->f_tmds = mode->clock;
 }
 
-static const struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
-	.dpms = adv7511_encoder_dpms,
-	.mode_valid = adv7511_encoder_mode_valid,
-	.mode_set = adv7511_encoder_mode_set,
-	.detect = adv7511_encoder_detect,
-	.get_modes = adv7511_get_modes,
+/* Connector funcs */
+static struct adv7511 *connector_to_adv7511(struct drm_connector *connector)
+{
+	return container_of(connector, struct adv7511, connector);
+}
+
+static int adv7511_connector_get_modes(struct drm_connector *connector)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_get_modes(adv, connector);
+}
+
+static enum drm_mode_status
+adv7511_connector_mode_valid(struct drm_connector *connector,
+			     struct drm_display_mode *mode)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_mode_valid(adv, mode);
+}
+
+static struct drm_connector_helper_funcs adv7511_connector_helper_funcs = {
+	.get_modes = adv7511_connector_get_modes,
+	.mode_valid = adv7511_connector_mode_valid,
+};
+
+static enum drm_connector_status
+adv7511_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_detect(adv, connector);
+}
+
+static struct drm_connector_funcs adv7511_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = adv7511_connector_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+/* Bridge funcs */
+static struct adv7511 *bridge_to_adv7511(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct adv7511, bridge);
+}
+
+static void adv7511_bridge_enable(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_power_on(adv);
+}
+
+static void adv7511_bridge_disable(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_power_off(adv);
+}
+
+static void adv7511_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adj_mode)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_mode_set(adv, mode, adj_mode);
+}
+
+static int adv7511_bridge_attach(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	ret = drm_connector_init(bridge->dev, &adv->connector,
+				 &adv7511_connector_funcs,
+				 DRM_MODE_CONNECTOR_HDMIA);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector with drm\n");
+		return ret;
+	}
+	drm_connector_helper_add(&adv->connector,
+				 &adv7511_connector_helper_funcs);
+	drm_mode_connector_attach_encoder(&adv->connector, bridge->encoder);
+
+	if (adv->type == ADV7533)
+		ret = adv7533_attach_dsi(adv);
+
+	return ret;
+}
+
+static struct drm_bridge_funcs adv7511_bridge_funcs = {
+	.enable = adv7511_bridge_enable,
+	.disable = adv7511_bridge_disable,
+	.mode_set = adv7511_bridge_mode_set,
+	.attach = adv7511_bridge_attach,
 };
 
 /* -----------------------------------------------------------------------------
@@ -780,8 +845,6 @@ static int adv7511_parse_dt(struct device_node *np,
 	const char *str;
 	int ret;
 
-	memset(config, 0, sizeof(*config));
-
 	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
 	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
 	    config->input_color_depth != 12)
@@ -881,7 +944,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	adv7511->powered = false;
 	adv7511->status = connector_status_disconnected;
 
-	ret = adv7511_parse_dt(dev->of_node, &link_config);
+	if (dev->of_node)
+		adv7511->type = (enum adv7511_type)of_device_get_match_data(dev);
+	else
+		adv7511->type = id->driver_data;
+
+	memset(&link_config, 0, sizeof(link_config));
+
+	if (adv7511->type == ADV7511)
+		ret = adv7511_parse_dt(dev->of_node, &link_config);
+	else
+		ret = adv7533_parse_dt(dev->of_node, adv7511);
 	if (ret)
 		return ret;
 
@@ -907,8 +980,12 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 		return ret;
 	dev_dbg(dev, "Rev. %d\n", val);
 
-	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
-				    ARRAY_SIZE(adv7511_fixed_registers));
+	if (adv7511->type == ADV7511)
+		ret = regmap_register_patch(adv7511->regmap,
+					    adv7511_fixed_registers,
+					    ARRAY_SIZE(adv7511_fixed_registers));
+	else
+		ret = adv7533_patch_registers(adv7511);
 	if (ret)
 		return ret;
 
@@ -923,6 +1000,12 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (!adv7511->i2c_edid)
 		return -ENOMEM;
 
+	if (adv7511->type == ADV7533) {
+		ret = adv7533_init_cec(adv7511);
+		if (ret)
+			goto err_i2c_unregister_edid;
+	}
+
 	if (i2c->irq) {
 		init_waitqueue_head(&adv7511->wq);
 
@@ -931,7 +1014,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 						IRQF_ONESHOT, dev_name(dev),
 						adv7511);
 		if (ret)
-			goto err_i2c_unregister_device;
+			goto err_unregister_cec;
 	}
 
 	/* CEC is unused for now */
@@ -942,11 +1025,23 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	i2c_set_clientdata(i2c, adv7511);
 
-	adv7511_set_link_config(adv7511, &link_config);
+	if (adv7511->type == ADV7511)
+		adv7511_set_link_config(adv7511, &link_config);
+
+	adv7511->bridge.funcs = &adv7511_bridge_funcs;
+	adv7511->bridge.of_node = dev->of_node;
+
+	ret = drm_bridge_add(&adv7511->bridge);
+	if (ret) {
+		dev_err(dev, "failed to add adv7511 bridge\n");
+		goto err_unregister_cec;
+	}
 
 	return 0;
 
-err_i2c_unregister_device:
+err_unregister_cec:
+	adv7533_uninit_cec(adv7511);
+err_i2c_unregister_edid:
 	i2c_unregister_device(adv7511->i2c_edid);
 
 	return ret;
@@ -956,66 +1051,71 @@ static int adv7511_remove(struct i2c_client *i2c)
 {
 	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
 
-	i2c_unregister_device(adv7511->i2c_edid);
-
-	kfree(adv7511->edid);
-
-	return 0;
-}
-
-static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
-				struct drm_encoder_slave *encoder)
-{
+	if (adv7511->type == ADV7533) {
+		adv7533_detach_dsi(adv7511);
+		adv7533_uninit_cec(adv7511);
+	}
 
-	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+	drm_bridge_remove(&adv7511->bridge);
 
-	encoder->slave_priv = adv7511;
-	encoder->slave_funcs = &adv7511_encoder_funcs;
+	i2c_unregister_device(adv7511->i2c_edid);
 
-	adv7511->encoder = &encoder->base;
+	kfree(adv7511->edid);
 
 	return 0;
 }
 
 static const struct i2c_device_id adv7511_i2c_ids[] = {
-	{ "adv7511", 0 },
-	{ "adv7511w", 0 },
-	{ "adv7513", 0 },
+	{ "adv7511", ADV7511 },
+	{ "adv7511w", ADV7511 },
+	{ "adv7513", ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ "adv7533", ADV7533 },
+#endif
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
 
 static const struct of_device_id adv7511_of_ids[] = {
-	{ .compatible = "adi,adv7511", },
-	{ .compatible = "adi,adv7511w", },
-	{ .compatible = "adi,adv7513", },
+	{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
+#endif
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adv7511_of_ids);
 
-static struct drm_i2c_encoder_driver adv7511_driver = {
-	.i2c_driver = {
-		.driver = {
-			.name = "adv7511",
-			.of_match_table = adv7511_of_ids,
-		},
-		.id_table = adv7511_i2c_ids,
-		.probe = adv7511_probe,
-		.remove = adv7511_remove,
-	},
+static struct mipi_dsi_driver adv7533_dsi_driver = {
+	.driver.name = "adv7533",
+};
 
-	.encoder_init = adv7511_encoder_init,
+static struct i2c_driver adv7511_driver = {
+	.driver = {
+		.name = "adv7511",
+		.of_match_table = adv7511_of_ids,
+	},
+	.id_table = adv7511_i2c_ids,
+	.probe = adv7511_probe,
+	.remove = adv7511_remove,
 };
 
 static int __init adv7511_init(void)
 {
-	return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_register(&adv7533_dsi_driver);
+
+	return i2c_add_driver(&adv7511_driver);
 }
 module_init(adv7511_init);
 
 static void __exit adv7511_exit(void)
 {
-	drm_i2c_encoder_unregister(&adv7511_driver);
+	i2c_del_driver(&adv7511_driver);
+
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_unregister(&adv7533_dsi_driver);
 }
 module_exit(adv7511_exit);
 
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
new file mode 100644
index 000000000000..5eebd15899b1
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_graph.h>
+
+#include "adv7511.h"
+
+static const struct reg_sequence adv7533_fixed_registers[] = {
+	{ 0x16, 0x20 },
+	{ 0x9a, 0xe0 },
+	{ 0xba, 0x70 },
+	{ 0xde, 0x82 },
+	{ 0xe4, 0x40 },
+	{ 0xe5, 0x80 },
+};
+
+static const struct reg_sequence adv7533_cec_fixed_registers[] = {
+	{ 0x15, 0xd0 },
+	{ 0x17, 0xd0 },
+	{ 0x24, 0x20 },
+	{ 0x57, 0x11 },
+};
+
+static const struct regmap_config adv7533_cec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static void adv7511_dsi_config_timing_gen(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	struct drm_display_mode *mode = &adv->curr_mode;
+	unsigned int hsw, hfp, hbp, vsw, vfp, vbp;
+	u8 clock_div_by_lanes[] = { 6, 4, 3 };	/* 2, 3, 4 lanes */
+
+	hsw = mode->hsync_end - mode->hsync_start;
+	hfp = mode->hsync_start - mode->hdisplay;
+	hbp = mode->htotal - mode->hsync_end;
+	vsw = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	/* set pixel clock divider mode */
+	regmap_write(adv->regmap_cec, 0x16,
+		     clock_div_by_lanes[dsi->lanes - 2] << 3);
+
+	/* horizontal porch params */
+	regmap_write(adv->regmap_cec, 0x28, mode->htotal >> 4);
+	regmap_write(adv->regmap_cec, 0x29, (mode->htotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2a, hsw >> 4);
+	regmap_write(adv->regmap_cec, 0x2b, (hsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2c, hfp >> 4);
+	regmap_write(adv->regmap_cec, 0x2d, (hfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2e, hbp >> 4);
+	regmap_write(adv->regmap_cec, 0x2f, (hbp << 4) & 0xff);
+
+	/* vertical porch params */
+	regmap_write(adv->regmap_cec, 0x30, mode->vtotal >> 4);
+	regmap_write(adv->regmap_cec, 0x31, (mode->vtotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x32, vsw >> 4);
+	regmap_write(adv->regmap_cec, 0x33, (vsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x34, vfp >> 4);
+	regmap_write(adv->regmap_cec, 0x35, (vfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x36, vbp >> 4);
+	regmap_write(adv->regmap_cec, 0x37, (vbp << 4) & 0xff);
+}
+
+void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+
+	if (adv->use_timing_gen)
+		adv7511_dsi_config_timing_gen(adv);
+
+	/* set number of dsi lanes */
+	regmap_write(adv->regmap_cec, 0x1c, dsi->lanes << 4);
+
+	if (adv->use_timing_gen) {
+		/* reset internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+		regmap_write(adv->regmap_cec, 0x27, 0x8b);
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+	} else {
+		/* disable internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0x0b);
+	}
+
+	/* enable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x89);
+	/* disable test mode */
+	regmap_write(adv->regmap_cec, 0x55, 0x00);
+
+	regmap_register_patch(adv->regmap_cec, adv7533_cec_fixed_registers,
+			      ARRAY_SIZE(adv7533_cec_fixed_registers));
+}
+
+void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+	/* disable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x0b);
+	/* disable internal timing generator */
+	regmap_write(adv->regmap_cec, 0x27, 0x0b);
+}
+
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	int lanes, ret;
+
+	if (adv->num_dsi_lanes != 4)
+		return;
+
+	if (mode->clock > 80000)
+		lanes = 4;
+	else
+		lanes = 3;
+
+	if (lanes != dsi->lanes) {
+		mipi_dsi_detach(dsi);
+		dsi->lanes = lanes;
+		ret = mipi_dsi_attach(dsi);
+		if (ret)
+			dev_err(&dsi->dev, "failed to change host lanes\n");
+	}
+}
+
+int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return regmap_register_patch(adv->regmap,
+				     adv7533_fixed_registers,
+				     ARRAY_SIZE(adv7533_fixed_registers));
+}
+
+void adv7533_uninit_cec(struct adv7511 *adv)
+{
+	i2c_unregister_device(adv->i2c_cec);
+}
+
+static const int cec_i2c_addr = 0x78;
+
+int adv7533_init_cec(struct adv7511 *adv)
+{
+	int ret;
+
+	adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter, cec_i2c_addr >> 1);
+	if (!adv->i2c_cec)
+		return -ENOMEM;
+
+	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
+					&adv7533_cec_regmap_config);
+	if (IS_ERR(adv->regmap_cec)) {
+		ret = PTR_ERR(adv->regmap_cec);
+		goto err;
+	}
+
+	ret = regmap_register_patch(adv->regmap_cec,
+				    adv7533_cec_fixed_registers,
+				    ARRAY_SIZE(adv7533_cec_fixed_registers));
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	adv7533_uninit_cec(adv);
+	return ret;
+}
+
+int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	struct device *dev = &adv->i2c_main->dev;
+	struct mipi_dsi_host *host;
+	struct mipi_dsi_device *dsi;
+	int ret = 0;
+	const struct mipi_dsi_device_info info = { .type = "adv7533",
+						   .channel = 0,
+						   .node = NULL,
+						 };
+
+	host = of_find_mipi_dsi_host_by_node(adv->host_node);
+	if (!host) {
+		dev_err(dev, "failed to find dsi host\n");
+		return -EPROBE_DEFER;
+	}
+
+	dsi = mipi_dsi_device_register_full(host, &info);
+	if (IS_ERR(dsi)) {
+		dev_err(dev, "failed to create dsi device\n");
+		ret = PTR_ERR(dsi);
+		goto err_dsi_device;
+	}
+
+	adv->dsi = dsi;
+
+	dsi->lanes = adv->num_dsi_lanes;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+			  MIPI_DSI_MODE_EOT_PACKET | MIPI_DSI_MODE_VIDEO_HSE;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach dsi to host\n");
+		goto err_dsi_attach;
+	}
+
+	return 0;
+
+err_dsi_attach:
+	mipi_dsi_device_unregister(dsi);
+err_dsi_device:
+	return ret;
+}
+
+void adv7533_detach_dsi(struct adv7511 *adv)
+{
+	mipi_dsi_detach(adv->dsi);
+	mipi_dsi_device_unregister(adv->dsi);
+}
+
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	u32 num_lanes;
+	struct device_node *endpoint;
+
+	of_property_read_u32(np, "adi,dsi-lanes", &num_lanes);
+
+	if (num_lanes < 1 || num_lanes > 4)
+		return -EINVAL;
+
+	adv->num_dsi_lanes = num_lanes;
+
+	endpoint = of_graph_get_next_endpoint(np, NULL);
+	if (!endpoint)
+		return -ENODEV;
+
+	adv->host_node = of_graph_get_remote_port_parent(endpoint);
+	if (!adv->host_node) {
+		of_node_put(endpoint);
+		return -ENODEV;
+	}
+
+	of_node_put(endpoint);
+	of_node_put(adv->host_node);
+
+	adv->use_timing_gen = !of_property_read_bool(np,
+						"adi,disable-timing-generator");
+
+	/* TODO: Check if these need to be parsed by DT or not */
+	adv->rgb = true;
+	adv->embedded_sync = false;
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
new file mode 100644
index 000000000000..a09825d8c94a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -0,0 +1,1413 @@
+/*
+ * tc358767 eDP bridge driver
+ *
+ * Copyright (C) 2016 CogentEmbedded Inc
+ * Author: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+ *
+ * Copyright (C) 2016 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * Initially based on: drivers/gpu/drm/i2c/tda998x_drv.c
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+
+/* Registers */
+
+/* Display Parallel Interface */
+#define DPIPXLFMT		0x0440
+#define VS_POL_ACTIVE_LOW		(1 << 10)
+#define HS_POL_ACTIVE_LOW		(1 << 9)
+#define DE_POL_ACTIVE_HIGH		(0 << 8)
+#define SUB_CFG_TYPE_CONFIG1		(0 << 2) /* LSB aligned */
+#define SUB_CFG_TYPE_CONFIG2		(1 << 2) /* Loosely Packed */
+#define SUB_CFG_TYPE_CONFIG3		(2 << 2) /* LSB aligned 8-bit */
+#define DPI_BPP_RGB888			(0 << 0)
+#define DPI_BPP_RGB666			(1 << 0)
+#define DPI_BPP_RGB565			(2 << 0)
+
+/* Video Path */
+#define VPCTRL0			0x0450
+#define OPXLFMT_RGB666			(0 << 8)
+#define OPXLFMT_RGB888			(1 << 8)
+#define FRMSYNC_DISABLED		(0 << 4) /* Video Timing Gen Disabled */
+#define FRMSYNC_ENABLED			(1 << 4) /* Video Timing Gen Enabled */
+#define MSF_DISABLED			(0 << 0) /* Magic Square FRC disabled */
+#define MSF_ENABLED			(1 << 0) /* Magic Square FRC enabled */
+#define HTIM01			0x0454
+#define HTIM02			0x0458
+#define VTIM01			0x045c
+#define VTIM02			0x0460
+#define VFUEN0			0x0464
+#define VFUEN				BIT(0)   /* Video Frame Timing Upload */
+
+/* System */
+#define TC_IDREG		0x0500
+#define SYSCTRL			0x0510
+#define DP0_AUDSRC_NO_INPUT		(0 << 3)
+#define DP0_AUDSRC_I2S_RX		(1 << 3)
+#define DP0_VIDSRC_NO_INPUT		(0 << 0)
+#define DP0_VIDSRC_DSI_RX		(1 << 0)
+#define DP0_VIDSRC_DPI_RX		(2 << 0)
+#define DP0_VIDSRC_COLOR_BAR		(3 << 0)
+
+/* Control */
+#define DP0CTL			0x0600
+#define VID_MN_GEN			BIT(6)   /* Auto-generate M/N values */
+#define EF_EN				BIT(5)   /* Enable Enhanced Framing */
+#define VID_EN				BIT(1)   /* Video transmission enable */
+#define DP_EN				BIT(0)   /* Enable DPTX function */
+
+/* Clocks */
+#define DP0_VIDMNGEN0		0x0610
+#define DP0_VIDMNGEN1		0x0614
+#define DP0_VMNGENSTATUS	0x0618
+
+/* Main Channel */
+#define DP0_SECSAMPLE		0x0640
+#define DP0_VIDSYNCDELAY	0x0644
+#define DP0_TOTALVAL		0x0648
+#define DP0_STARTVAL		0x064c
+#define DP0_ACTIVEVAL		0x0650
+#define DP0_SYNCVAL		0x0654
+#define DP0_MISC		0x0658
+#define TU_SIZE_RECOMMENDED		(0x3f << 16) /* LSCLK cycles per TU */
+#define BPC_6				(0 << 5)
+#define BPC_8				(1 << 5)
+
+/* AUX channel */
+#define DP0_AUXCFG0		0x0660
+#define DP0_AUXCFG1		0x0664
+#define AUX_RX_FILTER_EN		BIT(16)
+
+#define DP0_AUXADDR		0x0668
+#define DP0_AUXWDATA(i)		(0x066c + (i) * 4)
+#define DP0_AUXRDATA(i)		(0x067c + (i) * 4)
+#define DP0_AUXSTATUS		0x068c
+#define AUX_STATUS_MASK			0xf0
+#define AUX_STATUS_SHIFT		4
+#define AUX_TIMEOUT			BIT(1)
+#define AUX_BUSY			BIT(0)
+#define DP0_AUXI2CADR		0x0698
+
+/* Link Training */
+#define DP0_SRCCTRL		0x06a0
+#define DP0_SRCCTRL_SCRMBLDIS		BIT(13)
+#define DP0_SRCCTRL_EN810B		BIT(12)
+#define DP0_SRCCTRL_NOTP		(0 << 8)
+#define DP0_SRCCTRL_TP1			(1 << 8)
+#define DP0_SRCCTRL_TP2			(2 << 8)
+#define DP0_SRCCTRL_LANESKEW		BIT(7)
+#define DP0_SRCCTRL_SSCG		BIT(3)
+#define DP0_SRCCTRL_LANES_1		(0 << 2)
+#define DP0_SRCCTRL_LANES_2		(1 << 2)
+#define DP0_SRCCTRL_BW27		(1 << 1)
+#define DP0_SRCCTRL_BW162		(0 << 1)
+#define DP0_SRCCTRL_AUTOCORRECT		BIT(0)
+#define DP0_LTSTAT		0x06d0
+#define LT_LOOPDONE			BIT(13)
+#define LT_STATUS_MASK			(0x1f << 8)
+#define LT_CHANNEL1_EQ_BITS		(DP_CHANNEL_EQ_BITS << 4)
+#define LT_INTERLANE_ALIGN_DONE		BIT(3)
+#define LT_CHANNEL0_EQ_BITS		(DP_CHANNEL_EQ_BITS)
+#define DP0_SNKLTCHGREQ		0x06d4
+#define DP0_LTLOOPCTRL		0x06d8
+#define DP0_SNKLTCTRL		0x06e4
+
+/* PHY */
+#define DP_PHY_CTRL		0x0800
+#define DP_PHY_RST			BIT(28)  /* DP PHY Global Soft Reset */
+#define BGREN				BIT(25)  /* AUX PHY BGR Enable */
+#define PWR_SW_EN			BIT(24)  /* PHY Power Switch Enable */
+#define PHY_M1_RST			BIT(12)  /* Reset PHY1 Main Channel */
+#define PHY_RDY				BIT(16)  /* PHY Main Channels Ready */
+#define PHY_M0_RST			BIT(8)   /* Reset PHY0 Main Channel */
+#define PHY_A0_EN			BIT(1)   /* PHY Aux Channel0 Enable */
+#define PHY_M0_EN			BIT(0)   /* PHY Main Channel0 Enable */
+
+/* PLL */
+#define DP0_PLLCTRL		0x0900
+#define DP1_PLLCTRL		0x0904	/* not defined in DS */
+#define PXL_PLLCTRL		0x0908
+#define PLLUPDATE			BIT(2)
+#define PLLBYP				BIT(1)
+#define PLLEN				BIT(0)
+#define PXL_PLLPARAM		0x0914
+#define IN_SEL_REFCLK			(0 << 14)
+#define SYS_PLLPARAM		0x0918
+#define REF_FREQ_38M4			(0 << 8) /* 38.4 MHz */
+#define REF_FREQ_19M2			(1 << 8) /* 19.2 MHz */
+#define REF_FREQ_26M			(2 << 8) /* 26 MHz */
+#define REF_FREQ_13M			(3 << 8) /* 13 MHz */
+#define SYSCLK_SEL_LSCLK		(0 << 4)
+#define LSCLK_DIV_1			(0 << 0)
+#define LSCLK_DIV_2			(1 << 0)
+
+/* Test & Debug */
+#define TSTCTL			0x0a00
+#define PLL_DBG			0x0a04
+
+static bool tc_test_pattern;
+module_param_named(test, tc_test_pattern, bool, 0644);
+
+struct tc_edp_link {
+	struct drm_dp_link	base;
+	u8			assr;
+	int			scrambler_dis;
+	int			spread;
+	int			coding8b10b;
+	u8			swing;
+	u8			preemp;
+};
+
+struct tc_data {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct drm_dp_aux	aux;
+
+	struct drm_bridge	bridge;
+	struct drm_connector	connector;
+	struct drm_panel	*panel;
+
+	/* link settings */
+	struct tc_edp_link	link;
+
+	/* display edid */
+	struct edid		*edid;
+	/* current mode */
+	struct drm_display_mode	*mode;
+
+	u32			rev;
+	u8			assr;
+
+	struct gpio_desc	*sd_gpio;
+	struct gpio_desc	*reset_gpio;
+	struct clk		*refclk;
+};
+
+static inline struct tc_data *aux_to_tc(struct drm_dp_aux *a)
+{
+	return container_of(a, struct tc_data, aux);
+}
+
+static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
+{
+	return container_of(b, struct tc_data, bridge);
+}
+
+static inline struct tc_data *connector_to_tc(struct drm_connector *c)
+{
+	return container_of(c, struct tc_data, connector);
+}
+
+/* Simple macros to avoid repeated error checks */
+#define tc_write(reg, var)					\
+	do {							\
+		ret = regmap_write(tc->regmap, reg, var);	\
+		if (ret)					\
+			goto err;				\
+	} while (0)
+#define tc_read(reg, var)					\
+	do {							\
+		ret = regmap_read(tc->regmap, reg, var);	\
+		if (ret)					\
+			goto err;				\
+	} while (0)
+
+static inline int tc_poll_timeout(struct regmap *map, unsigned int addr,
+				  unsigned int cond_mask,
+				  unsigned int cond_value,
+				  unsigned long sleep_us, u64 timeout_us)
+{
+	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us);
+	unsigned int val;
+	int ret;
+
+	for (;;) {
+		ret = regmap_read(map, addr, &val);
+		if (ret)
+			break;
+		if ((val & cond_mask) == cond_value)
+			break;
+		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) {
+			ret = regmap_read(map, addr, &val);
+			break;
+		}
+		if (sleep_us)
+			usleep_range((sleep_us >> 2) + 1, sleep_us);
+	}
+	return ret ?: (((val & cond_mask) == cond_value) ? 0 : -ETIMEDOUT);
+}
+
+static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
+{
+	return tc_poll_timeout(tc->regmap, DP0_AUXSTATUS, AUX_BUSY, 0,
+			       1000, 1000 * timeout_ms);
+}
+
+static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
+{
+	int ret;
+	u32 value;
+
+	ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &value);
+	if (ret < 0)
+		return ret;
+	if (value & AUX_BUSY) {
+		if (value & AUX_TIMEOUT) {
+			dev_err(tc->dev, "i2c access timeout!\n");
+			return -ETIMEDOUT;
+		}
+		return -EBUSY;
+	}
+
+	*reply = (value & AUX_STATUS_MASK) >> AUX_STATUS_SHIFT;
+	return 0;
+}
+
+static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
+			       struct drm_dp_aux_msg *msg)
+{
+	struct tc_data *tc = aux_to_tc(aux);
+	size_t size = min_t(size_t, 8, msg->size);
+	u8 request = msg->request & ~DP_AUX_I2C_MOT;
+	u8 *buf = msg->buffer;
+	u32 tmp = 0;
+	int i = 0;
+	int ret;
+
+	if (size == 0)
+		return 0;
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
+		/* Store data */
+		while (i < size) {
+			if (request == DP_AUX_NATIVE_WRITE)
+				tmp = tmp | (buf[i] << (8 * (i & 0x3)));
+			else
+				tmp = (tmp << 8) | buf[i];
+			i++;
+			if (((i % 4) == 0) || (i == size)) {
+				tc_write(DP0_AUXWDATA(i >> 2), tmp);
+				tmp = 0;
+			}
+		}
+	} else if (request != DP_AUX_I2C_READ &&
+		   request != DP_AUX_NATIVE_READ) {
+		return -EINVAL;
+	}
+
+	/* Store address */
+	tc_write(DP0_AUXADDR, msg->address);
+	/* Start transfer */
+	tc_write(DP0_AUXCFG0, ((size - 1) << 8) | request);
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	ret = tc_aux_get_status(tc, &msg->reply);
+	if (ret)
+		goto err;
+
+	if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
+		/* Read data */
+		while (i < size) {
+			if ((i % 4) == 0)
+				tc_read(DP0_AUXRDATA(i >> 2), &tmp);
+			buf[i] = tmp & 0xff;
+			tmp = tmp >> 8;
+			i++;
+		}
+	}
+
+	return size;
+err:
+	return ret;
+}
+
+static const char * const training_pattern1_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Max voltage reached error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static const char * const training_pattern2_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Clock recovery failed error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static u32 tc_srcctrl(struct tc_data *tc)
+{
+	/*
+	 * No training pattern, skew lane 1 data by two LSCLK cycles with
+	 * respect to lane 0 data, AutoCorrect Mode = 0
+	 */
+	u32 reg = DP0_SRCCTRL_NOTP | DP0_SRCCTRL_LANESKEW;
+
+	if (tc->link.scrambler_dis)
+		reg |= DP0_SRCCTRL_SCRMBLDIS;	/* Scrambler Disabled */
+	if (tc->link.coding8b10b)
+		/* Enable 8/10B Encoder (TxData[19:16] not used) */
+		reg |= DP0_SRCCTRL_EN810B;
+	if (tc->link.spread)
+		reg |= DP0_SRCCTRL_SSCG;	/* Spread Spectrum Enable */
+	if (tc->link.base.num_lanes == 2)
+		reg |= DP0_SRCCTRL_LANES_2;	/* Two Main Channel Lanes */
+	if (tc->link.base.rate != 162000)
+		reg |= DP0_SRCCTRL_BW27;	/* 2.7 Gbps link */
+	return reg;
+}
+
+static void tc_wait_pll_lock(struct tc_data *tc)
+{
+	/* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
+	usleep_range(3000, 6000);
+}
+
+static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
+{
+	int ret;
+	int i_pre, best_pre = 1;
+	int i_post, best_post = 1;
+	int div, best_div = 1;
+	int mul, best_mul = 1;
+	int delta, best_delta;
+	int ext_div[] = {1, 2, 3, 5, 7};
+	int best_pixelclock = 0;
+	int vco_hi = 0;
+
+	dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
+		refclk);
+	best_delta = pixelclock;
+	/* Loop over all possible ext_divs, skipping invalid configurations */
+	for (i_pre = 0; i_pre < ARRAY_SIZE(ext_div); i_pre++) {
+		/*
+		 * refclk / ext_pre_div should be in the 1 to 200 MHz range.
+		 * We don't allow any refclk > 200 MHz, only check lower bounds.
+		 */
+		if (refclk / ext_div[i_pre] < 1000000)
+			continue;
+		for (i_post = 0; i_post < ARRAY_SIZE(ext_div); i_post++) {
+			for (div = 1; div <= 16; div++) {
+				u32 clk;
+				u64 tmp;
+
+				tmp = pixelclock * ext_div[i_pre] *
+				      ext_div[i_post] * div;
+				do_div(tmp, refclk);
+				mul = tmp;
+
+				/* Check limits */
+				if ((mul < 1) || (mul > 128))
+					continue;
+
+				clk = (refclk / ext_div[i_pre] / div) * mul;
+				/*
+				 * refclk * mul / (ext_pre_div * pre_div)
+				 * should be in the 150 to 650 MHz range
+				 */
+				if ((clk > 650000000) || (clk < 150000000))
+					continue;
+
+				clk = clk / ext_div[i_post];
+				delta = clk - pixelclock;
+
+				if (abs(delta) < abs(best_delta)) {
+					best_pre = i_pre;
+					best_post = i_post;
+					best_div = div;
+					best_mul = mul;
+					best_delta = delta;
+					best_pixelclock = clk;
+				}
+			}
+		}
+	}
+	if (best_pixelclock == 0) {
+		dev_err(tc->dev, "Failed to calc clock for %d pixelclock\n",
+			pixelclock);
+		return -EINVAL;
+	}
+
+	dev_dbg(tc->dev, "PLL: got %d, delta %d\n", best_pixelclock,
+		best_delta);
+	dev_dbg(tc->dev, "PLL: %d / %d / %d * %d / %d\n", refclk,
+		ext_div[best_pre], best_div, best_mul, ext_div[best_post]);
+
+	/* if VCO >= 300 MHz */
+	if (refclk / ext_div[best_pre] / best_div * best_mul >= 300000000)
+		vco_hi = 1;
+	/* see DS */
+	if (best_div == 16)
+		best_div = 0;
+	if (best_mul == 128)
+		best_mul = 0;
+
+	/* Power up PLL and switch to bypass */
+	tc_write(PXL_PLLCTRL, PLLBYP | PLLEN);
+
+	tc_write(PXL_PLLPARAM,
+		 (vco_hi << 24) |		/* For PLL VCO >= 300 MHz = 1 */
+		 (ext_div[best_pre] << 20) |	/* External Pre-divider */
+		 (ext_div[best_post] << 16) |	/* External Post-divider */
+		 IN_SEL_REFCLK |		/* Use RefClk as PLL input */
+		 (best_div << 8) |		/* Divider for PLL RefClk */
+		 (best_mul << 0));		/* Multiplier for PLL */
+
+	/* Force PLL parameter update and disable bypass */
+	tc_write(PXL_PLLCTRL, PLLUPDATE | PLLEN);
+
+	tc_wait_pll_lock(tc);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_pxl_pll_dis(struct tc_data *tc)
+{
+	/* Enable PLL bypass, power down PLL */
+	return regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP);
+}
+
+static int tc_stream_clock_calc(struct tc_data *tc)
+{
+	int ret;
+	/*
+	 * If the Stream clock and Link Symbol clock are
+	 * asynchronous with each other, the value of M changes over
+	 * time. This way of generating link clock and stream
+	 * clock is called Asynchronous Clock mode. The value M
+	 * must change while the value N stays constant. The
+	 * value of N in this Asynchronous Clock mode must be set
+	 * to 2^15 or 32,768.
+	 *
+	 * LSCLK = 1/10 of high speed link clock
+	 *
+	 * f_STRMCLK = M/N * f_LSCLK
+	 * M/N = f_STRMCLK / f_LSCLK
+	 *
+	 */
+	tc_write(DP0_VIDMNGEN1, 32768);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_aux_link_setup(struct tc_data *tc)
+{
+	unsigned long rate;
+	u32 value;
+	int ret;
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
+		return -EINVAL;
+	}
+
+	/* Setup DP-PHY / PLL */
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+
+	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN);
+
+	/*
+	 * Initially PLLs are in bypass. Force PLL parameter update,
+	 * disable PLL bypass, enable PLL
+	 */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	ret = tc_poll_timeout(tc->regmap, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1,
+			      1000);
+	if (ret == -ETIMEDOUT) {
+		dev_err(tc->dev, "Timeout waiting for PHY to become ready");
+		return ret;
+	} else if (ret)
+		goto err;
+
+	/* Setup AUX link */
+	tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN |
+		 (0x06 << 8) |	/* Aux Bit Period Calculator Threshold */
+		 (0x3f << 0));	/* Aux Response Timeout Timer */
+
+	return 0;
+err:
+	dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret);
+	return ret;
+}
+
+static int tc_get_display_props(struct tc_data *tc)
+{
+	int ret;
+	/* temp buffer */
+	u8 tmp[8];
+
+	/* Read DP Rx Link Capability */
+	ret = drm_dp_link_probe(&tc->aux, &tc->link.base);
+	if (ret < 0)
+		goto err_dpcd_read;
+	if ((tc->link.base.rate != 162000) && (tc->link.base.rate != 270000))
+		goto err_dpcd_inval;
+
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.spread = tmp[0] & BIT(0); /* 0.5% down spread */
+
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAIN_LINK_CHANNEL_CODING, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.coding8b10b = tmp[0] & BIT(0);
+	tc->link.scrambler_dis = 0;
+	/* read assr */
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_EDP_CONFIGURATION_SET, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.assr = tmp[0] & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+
+	dev_dbg(tc->dev, "DPCD rev: %d.%d, rate: %s, lanes: %d, framing: %s\n",
+		tc->link.base.revision >> 4, tc->link.base.revision & 0x0f,
+		(tc->link.base.rate == 162000) ? "1.62Gbps" : "2.7Gbps",
+		tc->link.base.num_lanes,
+		(tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING) ?
+		"enhanced" : "non-enhanced");
+	dev_dbg(tc->dev, "ANSI 8B/10B: %d\n", tc->link.coding8b10b);
+	dev_dbg(tc->dev, "Display ASSR: %d, TC358767 ASSR: %d\n",
+		tc->link.assr, tc->assr);
+
+	return 0;
+
+err_dpcd_read:
+	dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
+	return ret;
+err_dpcd_inval:
+	dev_err(tc->dev, "invalid DPCD\n");
+	return -EINVAL;
+}
+
+static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
+{
+	int ret;
+	int vid_sync_dly;
+	int max_tu_symbol;
+
+	int left_margin = mode->htotal - mode->hsync_end;
+	int right_margin = mode->hsync_start - mode->hdisplay;
+	int hsync_len = mode->hsync_end - mode->hsync_start;
+	int upper_margin = mode->vtotal - mode->vsync_end;
+	int lower_margin = mode->vsync_start - mode->vdisplay;
+	int vsync_len = mode->vsync_end - mode->vsync_start;
+
+	dev_dbg(tc->dev, "set mode %dx%d\n",
+		mode->hdisplay, mode->vdisplay);
+	dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
+		left_margin, right_margin, hsync_len);
+	dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
+		upper_margin, lower_margin, vsync_len);
+	dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
+
+
+	/* LCD Ctl Frame Size */
+	tc_write(VPCTRL0, (0x40 << 20) /* VSDELAY */ |
+		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
+	tc_write(HTIM01, (left_margin << 16) |		/* H back porch */
+			 (hsync_len << 0));		/* Hsync */
+	tc_write(HTIM02, (right_margin << 16) |		/* H front porch */
+			 (mode->hdisplay << 0));	/* width */
+	tc_write(VTIM01, (upper_margin << 16) |		/* V back porch */
+			 (vsync_len << 0));		/* Vsync */
+	tc_write(VTIM02, (lower_margin << 16) |		/* V front porch */
+			 (mode->vdisplay << 0));	/* height */
+	tc_write(VFUEN0, VFUEN);		/* update settings */
+
+	/* Test pattern settings */
+	tc_write(TSTCTL,
+		 (120 << 24) |	/* Red Color component value */
+		 (20 << 16) |	/* Green Color component value */
+		 (99 << 8) |	/* Blue Color component value */
+		 (1 << 4) |	/* Enable I2C Filter */
+		 (2 << 0) |	/* Color bar Mode */
+		 0);
+
+	/* DP Main Stream Attributes */
+	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
+	tc_write(DP0_VIDSYNCDELAY,
+		 (0x003e << 16) |	/* thresh_dly */
+		 (vid_sync_dly << 0));
+
+	tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
+
+	tc_write(DP0_STARTVAL,
+		 ((upper_margin + vsync_len) << 16) |
+		 ((left_margin + hsync_len) << 0));
+
+	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
+
+	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
+
+	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
+
+	/*
+	 * Recommended maximum number of symbols transferred in a transfer unit:
+	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
+	 *              (output active video bandwidth in bytes))
+	 * Must be less than tu_size.
+	 */
+	max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
+	tc_write(DP0_MISC, (max_tu_symbol << 23) | TU_SIZE_RECOMMENDED | BPC_8);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_link_training(struct tc_data *tc, int pattern)
+{
+	const char * const *errors;
+	u32 srcctrl = tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+		      DP0_SRCCTRL_AUTOCORRECT;
+	int timeout;
+	int retry;
+	u32 value;
+	int ret;
+
+	if (pattern == DP_TRAINING_PATTERN_1) {
+		srcctrl |= DP0_SRCCTRL_TP1;
+		errors = training_pattern1_errors;
+	} else {
+		srcctrl |= DP0_SRCCTRL_TP2;
+		errors = training_pattern2_errors;
+	}
+
+	/* Set DPCD 0x102 for Training Part 1 or 2 */
+	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE | pattern);
+
+	tc_write(DP0_LTLOOPCTRL,
+		 (0x0f << 28) |	/* Defer Iteration Count */
+		 (0x0f << 24) |	/* Loop Iteration Count */
+		 (0x0d << 0));	/* Loop Timer Delay */
+
+	retry = 5;
+	do {
+		/* Set DP0 Training Pattern */
+		tc_write(DP0_SRCCTRL, srcctrl);
+
+		/* Enable DP0 to start Link Training */
+		tc_write(DP0CTL, DP_EN);
+
+		/* wait */
+		timeout = 1000;
+		do {
+			tc_read(DP0_LTSTAT, &value);
+			udelay(1);
+		} while ((!(value & LT_LOOPDONE)) && (--timeout));
+		if (timeout == 0) {
+			dev_err(tc->dev, "Link training timeout!\n");
+		} else {
+			int pattern = (value >> 11) & 0x3;
+			int error = (value >> 8) & 0x7;
+
+			dev_dbg(tc->dev,
+				"Link training phase %d done after %d uS: %s\n",
+				pattern, 1000 - timeout, errors[error]);
+			if (pattern == DP_TRAINING_PATTERN_1 && error == 0)
+				break;
+			if (pattern == DP_TRAINING_PATTERN_2) {
+				value &= LT_CHANNEL1_EQ_BITS |
+					 LT_INTERLANE_ALIGN_DONE |
+					 LT_CHANNEL0_EQ_BITS;
+				/* in case of two lanes */
+				if ((tc->link.base.num_lanes == 2) &&
+				    (value == (LT_CHANNEL1_EQ_BITS |
+					       LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+				/* in case of one line */
+				if ((tc->link.base.num_lanes == 1) &&
+				    (value == (LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+			}
+		}
+		/* restart */
+		tc_write(DP0CTL, 0);
+		usleep_range(10, 20);
+	} while (--retry);
+	if (retry == 0) {
+		dev_err(tc->dev, "Failed to finish training phase %d\n",
+			pattern);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_main_link_setup(struct tc_data *tc)
+{
+	struct drm_dp_aux *aux = &tc->aux;
+	struct device *dev = tc->dev;
+	unsigned int rate;
+	u32 dp_phy_ctrl;
+	int timeout;
+	bool aligned;
+	bool ready;
+	u32 value;
+	int ret;
+	u8 tmp[8];
+
+	/* display mode should be set at this point */
+	if (!tc->mode)
+		return -EINVAL;
+
+	/* from excel file - DP0_SrcCtrl */
+	tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
+		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
+		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
+	/* from excel file - DP1_SrcCtrl */
+	tc_write(0x07a0, 0x00003083);
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		return -EINVAL;
+	}
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+	/* Setup Main Link */
+	dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN |  PHY_M0_EN;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	msleep(100);
+
+	/* PLL setup */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	/* PXL PLL setup */
+	if (tc_test_pattern) {
+		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
+				    1000 * tc->mode->clock);
+		if (ret)
+			goto err;
+	}
+
+	/* Reset/Enable Main Links */
+	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	usleep_range(100, 200);
+	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+
+	timeout = 1000;
+	do {
+		tc_read(DP_PHY_CTRL, &value);
+		udelay(1);
+	} while ((!(value & PHY_RDY)) && (--timeout));
+
+	if (timeout == 0) {
+		dev_err(dev, "timeout waiting for phy become ready");
+		return -ETIMEDOUT;
+	}
+
+	/* Set misc: 8 bits per color */
+	ret = regmap_update_bits(tc->regmap, DP0_MISC, BPC_8, BPC_8);
+	if (ret)
+		goto err;
+
+	/*
+	 * ASSR mode
+	 * on TC358767 side ASSR configured through strap pin
+	 * seems there is no way to change this setting from SW
+	 *
+	 * check is tc configured for same mode
+	 */
+	if (tc->assr != tc->link.assr) {
+		dev_dbg(dev, "Trying to set display to ASSR: %d\n",
+			tc->assr);
+		/* try to set ASSR on display side */
+		tmp[0] = tc->assr;
+		ret = drm_dp_dpcd_writeb(aux, DP_EDP_CONFIGURATION_SET, tmp[0]);
+		if (ret < 0)
+			goto err_dpcd_read;
+		/* read back */
+		ret = drm_dp_dpcd_readb(aux, DP_EDP_CONFIGURATION_SET, tmp);
+		if (ret < 0)
+			goto err_dpcd_read;
+
+		if (tmp[0] != tc->assr) {
+			dev_warn(dev, "Failed to switch display ASSR to %d, falling back to unscrambled mode\n",
+				 tc->assr);
+			/* trying with disabled scrambler */
+			tc->link.scrambler_dis = 1;
+		}
+	}
+
+	/* Setup Link & DPRx Config for Training */
+	ret = drm_dp_link_configure(aux, &tc->link.base);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	/* DOWNSPREAD_CTRL */
+	tmp[0] = tc->link.spread ? DP_SPREAD_AMP_0_5 : 0x00;
+	/* MAIN_LINK_CHANNEL_CODING_SET */
+	tmp[1] =  tc->link.coding8b10b ? DP_SET_ANSI_8B10B : 0x00;
+	ret = drm_dp_dpcd_write(aux, DP_DOWNSPREAD_CTRL, tmp, 2);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_1);
+	if (ret)
+		goto err;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_2);
+	if (ret)
+		goto err;
+
+	/* Clear DPCD 0x102 */
+	/* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
+	tmp[0] = tc->link.scrambler_dis ? DP_LINK_SCRAMBLING_DISABLE : 0x00;
+	ret = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET, tmp[0]);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	/* Clear Training Pattern, set AutoCorrect Mode = 1 */
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_AUTOCORRECT);
+
+	/* Wait */
+	timeout = 100;
+	do {
+		udelay(1);
+		/* Read DPCD 0x202-0x207 */
+		ret = drm_dp_dpcd_read_link_status(aux, tmp + 2);
+		if (ret < 0)
+			goto err_dpcd_read;
+		ready = (tmp[2] == ((DP_CHANNEL_EQ_BITS << 4) | /* Lane1 */
+				     DP_CHANNEL_EQ_BITS));      /* Lane0 */
+		aligned = tmp[4] & DP_INTERLANE_ALIGN_DONE;
+	} while ((--timeout) && !(ready && aligned));
+
+	if (timeout == 0) {
+		/* Read DPCD 0x200-0x201 */
+		ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT, tmp, 2);
+		if (ret < 0)
+			goto err_dpcd_read;
+		dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
+		dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
+			 tmp[1]);
+		dev_info(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n", tmp[2]);
+		dev_info(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n",
+			 tmp[4]);
+		dev_info(dev, "0x0205 SINK_STATUS: 0x%02x\n", tmp[5]);
+		dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
+			 tmp[6]);
+
+		if (!ready)
+			dev_err(dev, "Lane0/1 not ready\n");
+		if (!aligned)
+			dev_err(dev, "Lane0/1 not aligned\n");
+		return -EAGAIN;
+	}
+
+	ret = tc_set_video_mode(tc, tc->mode);
+	if (ret)
+		goto err;
+
+	/* Set M/N */
+	ret = tc_stream_clock_calc(tc);
+	if (ret)
+		goto err;
+
+	return 0;
+err_dpcd_read:
+	dev_err(tc->dev, "Failed to read DPCD: %d\n", ret);
+	return ret;
+err_dpcd_write:
+	dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
+err:
+	return ret;
+}
+
+static int tc_main_link_stream(struct tc_data *tc, int state)
+{
+	int ret;
+	u32 value;
+
+	dev_dbg(tc->dev, "stream: %d\n", state);
+
+	if (state) {
+		value = VID_MN_GEN | DP_EN;
+		if (tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+			value |= EF_EN;
+		tc_write(DP0CTL, value);
+		/*
+		 * VID_EN assertion should be delayed by at least N * LSCLK
+		 * cycles from the time VID_MN_GEN is enabled in order to
+		 * generate stable values for VID_M. LSCLK is 270 MHz or
+		 * 162 MHz, VID_N is set to 32768 in  tc_stream_clock_calc(),
+		 * so a delay of at least 203 us should suffice.
+		 */
+		usleep_range(500, 1000);
+		value |= VID_EN;
+		tc_write(DP0CTL, value);
+		/* Set input interface */
+		value = DP0_AUDSRC_NO_INPUT;
+		if (tc_test_pattern)
+			value |= DP0_VIDSRC_COLOR_BAR;
+		else
+			value |= DP0_VIDSRC_DPI_RX;
+		tc_write(SYSCTRL, value);
+	} else {
+		tc_write(DP0CTL, 0);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static enum drm_connector_status
+tc_connector_detect(struct drm_connector *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+static void tc_bridge_pre_enable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	drm_panel_prepare(tc->panel);
+}
+
+static void tc_bridge_enable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	ret = tc_main_link_setup(tc);
+	if (ret < 0) {
+		dev_err(tc->dev, "main link setup error: %d\n", ret);
+		return;
+	}
+
+	ret = tc_main_link_stream(tc, 1);
+	if (ret < 0) {
+		dev_err(tc->dev, "main link stream start error: %d\n", ret);
+		return;
+	}
+
+	drm_panel_enable(tc->panel);
+}
+
+static void tc_bridge_disable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	drm_panel_disable(tc->panel);
+
+	ret = tc_main_link_stream(tc, 0);
+	if (ret < 0)
+		dev_err(tc->dev, "main link stream stop error: %d\n", ret);
+}
+
+static void tc_bridge_post_disable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	drm_panel_unprepare(tc->panel);
+}
+
+static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adj)
+{
+	/* Fixup sync polarities, both hsync and vsync are active low */
+	adj->flags = mode->flags;
+	adj->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+	adj->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+
+	return true;
+}
+
+static int tc_connector_mode_valid(struct drm_connector *connector,
+				   struct drm_display_mode *mode)
+{
+	/* Accept any mode */
+	return MODE_OK;
+}
+
+static void tc_bridge_mode_set(struct drm_bridge *bridge,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adj)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	tc->mode = mode;
+}
+
+static int tc_connector_get_modes(struct drm_connector *connector)
+{
+	struct tc_data *tc = connector_to_tc(connector);
+	struct edid *edid;
+	unsigned int count;
+
+	if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) {
+		count = tc->panel->funcs->get_modes(tc->panel);
+		if (count > 0)
+			return count;
+	}
+
+	edid = drm_get_edid(connector, &tc->aux.ddc);
+
+	kfree(tc->edid);
+	tc->edid = edid;
+	if (!edid)
+		return 0;
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	return count;
+}
+
+static void tc_connector_set_polling(struct tc_data *tc,
+				     struct drm_connector *connector)
+{
+	/* TODO: add support for HPD */
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+			    DRM_CONNECTOR_POLL_DISCONNECT;
+}
+
+static struct drm_encoder *
+tc_connector_best_encoder(struct drm_connector *connector)
+{
+	struct tc_data *tc = connector_to_tc(connector);
+
+	return tc->bridge.encoder;
+}
+
+static const struct drm_connector_helper_funcs tc_connector_helper_funcs = {
+	.get_modes = tc_connector_get_modes,
+	.mode_valid = tc_connector_mode_valid,
+	.best_encoder = tc_connector_best_encoder,
+};
+
+static void tc_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs tc_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = tc_connector_detect,
+	.destroy = tc_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int tc_bridge_attach(struct drm_bridge *bridge)
+{
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	struct tc_data *tc = bridge_to_tc(bridge);
+	struct drm_device *drm = bridge->dev;
+	int ret;
+
+	/* Create eDP connector */
+	drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
+	ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
+				 DRM_MODE_CONNECTOR_eDP);
+	if (ret)
+		return ret;
+
+	if (tc->panel)
+		drm_panel_attach(tc->panel, &tc->connector);
+
+	drm_display_info_set_bus_formats(&tc->connector.display_info,
+					 &bus_format, 1);
+	drm_mode_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs tc_bridge_funcs = {
+	.attach = tc_bridge_attach,
+	.mode_set = tc_bridge_mode_set,
+	.pre_enable = tc_bridge_pre_enable,
+	.enable = tc_bridge_enable,
+	.disable = tc_bridge_disable,
+	.post_disable = tc_bridge_post_disable,
+	.mode_fixup = tc_bridge_mode_fixup,
+};
+
+static bool tc_readable_reg(struct device *dev, unsigned int reg)
+{
+	return reg != SYSCTRL;
+}
+
+static const struct regmap_range tc_volatile_ranges[] = {
+	regmap_reg_range(DP0_AUXWDATA(0), DP0_AUXSTATUS),
+	regmap_reg_range(DP0_LTSTAT, DP0_SNKLTCHGREQ),
+	regmap_reg_range(DP_PHY_CTRL, DP_PHY_CTRL),
+	regmap_reg_range(DP0_PLLCTRL, PXL_PLLCTRL),
+	regmap_reg_range(VFUEN0, VFUEN0),
+};
+
+static const struct regmap_access_table tc_volatile_table = {
+	.yes_ranges = tc_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tc_volatile_ranges),
+};
+
+static bool tc_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return (reg != TC_IDREG) &&
+	       (reg != DP0_LTSTAT) &&
+	       (reg != DP0_SNKLTCHGREQ);
+}
+
+static const struct regmap_config tc_regmap_config = {
+	.name = "tc358767",
+	.reg_bits = 16,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PLL_DBG,
+	.cache_type = REGCACHE_RBTREE,
+	.readable_reg = tc_readable_reg,
+	.volatile_table = &tc_volatile_table,
+	.writeable_reg = tc_writeable_reg,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *ep;
+	struct tc_data *tc;
+	int ret;
+
+	tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
+	if (!tc)
+		return -ENOMEM;
+
+	tc->dev = dev;
+
+	/* port@2 is the output port */
+	ep = of_graph_get_endpoint_by_regs(dev->of_node, 2, -1);
+	if (ep) {
+		struct device_node *remote;
+
+		remote = of_graph_get_remote_port_parent(ep);
+		if (!remote) {
+			dev_warn(dev, "endpoint %s not connected\n",
+				 ep->full_name);
+			of_node_put(ep);
+			return -ENODEV;
+		}
+		of_node_put(ep);
+		tc->panel = of_drm_find_panel(remote);
+		if (tc->panel) {
+			dev_dbg(dev, "found panel %s\n", remote->full_name);
+		} else {
+			dev_dbg(dev, "waiting for panel %s\n",
+				remote->full_name);
+			of_node_put(remote);
+			return -EPROBE_DEFER;
+		}
+		of_node_put(remote);
+	}
+
+	/* Shut down GPIO is optional */
+	tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
+	if (IS_ERR(tc->sd_gpio))
+		return PTR_ERR(tc->sd_gpio);
+
+	if (tc->sd_gpio) {
+		gpiod_set_value_cansleep(tc->sd_gpio, 0);
+		usleep_range(5000, 10000);
+	}
+
+	/* Reset GPIO is optional */
+	tc->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(tc->reset_gpio))
+		return PTR_ERR(tc->reset_gpio);
+
+	if (tc->reset_gpio) {
+		gpiod_set_value_cansleep(tc->reset_gpio, 1);
+		usleep_range(5000, 10000);
+	}
+
+	tc->refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(tc->refclk)) {
+		ret = PTR_ERR(tc->refclk);
+		dev_err(dev, "Failed to get refclk: %d\n", ret);
+		return ret;
+	}
+
+	tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config);
+	if (IS_ERR(tc->regmap)) {
+		ret = PTR_ERR(tc->regmap);
+		dev_err(dev, "Failed to initialize regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(tc->regmap, TC_IDREG, &tc->rev);
+	if (ret) {
+		dev_err(tc->dev, "can not read device ID: %d\n", ret);
+		return ret;
+	}
+
+	if ((tc->rev != 0x6601) && (tc->rev != 0x6603)) {
+		dev_err(tc->dev, "invalid device ID: 0x%08x\n", tc->rev);
+		return -EINVAL;
+	}
+
+	tc->assr = (tc->rev == 0x6601); /* Enable ASSR for eDP panels */
+
+	ret = tc_aux_link_setup(tc);
+	if (ret)
+		return ret;
+
+	/* Register DP AUX channel */
+	tc->aux.name = "TC358767 AUX i2c adapter";
+	tc->aux.dev = tc->dev;
+	tc->aux.transfer = tc_aux_transfer;
+	ret = drm_dp_aux_register(&tc->aux);
+	if (ret)
+		return ret;
+
+	ret = tc_get_display_props(tc);
+	if (ret)
+		goto err_unregister_aux;
+
+	tc_connector_set_polling(tc, &tc->connector);
+
+	tc->bridge.funcs = &tc_bridge_funcs;
+	tc->bridge.of_node = dev->of_node;
+	ret = drm_bridge_add(&tc->bridge);
+	if (ret) {
+		dev_err(dev, "Failed to add drm_bridge: %d\n", ret);
+		goto err_unregister_aux;
+	}
+
+	i2c_set_clientdata(client, tc);
+
+	return 0;
+err_unregister_aux:
+	drm_dp_aux_unregister(&tc->aux);
+	return ret;
+}
+
+static int tc_remove(struct i2c_client *client)
+{
+	struct tc_data *tc = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&tc->bridge);
+	drm_dp_aux_unregister(&tc->aux);
+
+	tc_pxl_pll_dis(tc);
+
+	return 0;
+}
+
+static const struct i2c_device_id tc358767_i2c_ids[] = {
+	{ "tc358767", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tc358767_i2c_ids);
+
+static const struct of_device_id tc358767_of_ids[] = {
+	{ .compatible = "toshiba,tc358767", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tc358767_of_ids);
+
+static struct i2c_driver tc358767_driver = {
+	.driver = {
+		.name = "tc358767",
+		.of_match_table = tc358767_of_ids,
+	},
+	.id_table = tc358767_i2c_ids,
+	.probe = tc_probe,
+	.remove	= tc_remove,
+};
+module_i2c_driver(tc358767_driver);
+
+MODULE_AUTHOR("Andrey Gusakov <andrey.gusakov@cogentembedded.com>");
+MODULE_DESCRIPTION("tc358767 eDP encoder driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 22c7ed63a001..4d341db462a2 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -1,12 +1,6 @@
 menu "I2C encoder or helper chips"
      depends on DRM && DRM_KMS_HELPER && I2C
 
-config DRM_I2C_ADV7511
-	tristate "AV7511 encoder"
-	select REGMAP_I2C
-	help
-	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
-
 config DRM_I2C_CH7006
 	tristate "Chrontel ch7006 TV encoder"
 	default m if DRM_NOUVEAU
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 2c72eb584ab7..43aa33baebed 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -1,7 +1,5 @@
 ccflags-y := -Iinclude/drm
 
-obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
-
 ch7006-y := ch7006_drv.o ch7006_mode.o
 obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
 
diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
index 827711e28226..d3b44651061a 100644
--- a/drivers/gpu/drm/rcar-du/Makefile
+++ b/drivers/gpu/drm/rcar-du/Makefile
@@ -7,8 +7,8 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_plane.o \
 		 rcar_du_vgacon.o
 
-rcar-du-drm-$(CONFIG_DRM_RCAR_HDMI)	+= rcar_du_hdmicon.o \
-					   rcar_du_hdmienc.o
+rcar-du-drm-$(CONFIG_DRM_RCAR_HDMI)	+= rcar_du_hdmienc.o
+
 rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
 
 rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
index 55149e9ce28e..ab8645c57e2d 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.c
@@ -19,7 +19,6 @@
 
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
-#include "rcar_du_hdmicon.h"
 #include "rcar_du_hdmienc.h"
 #include "rcar_du_kms.h"
 #include "rcar_du_lvdscon.h"
@@ -174,7 +173,7 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 		break;
 
 	case DRM_MODE_ENCODER_TMDS:
-		ret = rcar_du_hdmi_connector_init(rcdu, renc);
+		/* connector managed by the bridge driver */
 		break;
 
 	default:
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
index a8669c3e0dd5..7fc10a9c34c3 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_encoder.h
@@ -15,7 +15,6 @@
 #define __RCAR_DU_ENCODER_H__
 
 #include <drm/drm_crtc.h>
-#include <drm/drm_encoder_slave.h>
 
 struct rcar_du_device;
 struct rcar_du_hdmienc;
@@ -30,16 +29,16 @@ enum rcar_du_encoder_type {
 };
 
 struct rcar_du_encoder {
-	struct drm_encoder_slave slave;
+	struct drm_encoder base;
 	enum rcar_du_output output;
 	struct rcar_du_hdmienc *hdmi;
 	struct rcar_du_lvdsenc *lvds;
 };
 
 #define to_rcar_encoder(e) \
-	container_of(e, struct rcar_du_encoder, slave.base)
+	container_of(e, struct rcar_du_encoder, base)
 
-#define rcar_encoder_to_drm_encoder(e)	(&(e)->slave.base)
+#define rcar_encoder_to_drm_encoder(e)	(&(e)->base)
 
 struct rcar_du_connector {
 	struct drm_connector connector;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
deleted file mode 100644
index 612b4d5ae098..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * R-Car Display Unit HDMI Connector
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_encoder_slave.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_hdmicon.h"
-#include "rcar_du_kms.h"
-
-#define to_slave_funcs(e)	(to_rcar_encoder(e)->slave.slave_funcs)
-
-static int rcar_du_hdmi_connector_get_modes(struct drm_connector *connector)
-{
-	struct rcar_du_connector *con = to_rcar_connector(connector);
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(con->encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->get_modes == NULL)
-		return 0;
-
-	return sfuncs->get_modes(encoder, connector);
-}
-
-static int rcar_du_hdmi_connector_mode_valid(struct drm_connector *connector,
-					     struct drm_display_mode *mode)
-{
-	struct rcar_du_connector *con = to_rcar_connector(connector);
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(con->encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->mode_valid == NULL)
-		return MODE_OK;
-
-	return sfuncs->mode_valid(encoder, mode);
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
-	.get_modes = rcar_du_hdmi_connector_get_modes,
-	.mode_valid = rcar_du_hdmi_connector_mode_valid,
-};
-
-static enum drm_connector_status
-rcar_du_hdmi_connector_detect(struct drm_connector *connector, bool force)
-{
-	struct rcar_du_connector *con = to_rcar_connector(connector);
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(con->encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->detect == NULL)
-		return connector_status_unknown;
-
-	return sfuncs->detect(encoder, connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
-	.dpms = drm_atomic_helper_connector_dpms,
-	.reset = drm_atomic_helper_connector_reset,
-	.detect = rcar_du_hdmi_connector_detect,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = drm_connector_cleanup,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc)
-{
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
-	struct rcar_du_connector *rcon;
-	struct drm_connector *connector;
-	int ret;
-
-	rcon = devm_kzalloc(rcdu->dev, sizeof(*rcon), GFP_KERNEL);
-	if (rcon == NULL)
-		return -ENOMEM;
-
-	connector = &rcon->connector;
-	connector->display_info.width_mm = 0;
-	connector->display_info.height_mm = 0;
-	connector->interlace_allowed = true;
-	connector->polled = DRM_CONNECTOR_POLL_HPD;
-
-	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
-				 DRM_MODE_CONNECTOR_HDMIA);
-	if (ret < 0)
-		return ret;
-
-	drm_connector_helper_add(connector, &connector_helper_funcs);
-
-	connector->dpms = DRM_MODE_DPMS_OFF;
-	drm_object_property_set_value(&connector->base,
-		rcdu->ddev->mode_config.dpms_property, DRM_MODE_DPMS_OFF);
-
-	ret = drm_mode_connector_attach_encoder(connector, encoder);
-	if (ret < 0)
-		return ret;
-
-	rcon->encoder = renc;
-
-	return 0;
-}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h b/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h
deleted file mode 100644
index 87daa949227f..000000000000
--- a/drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * R-Car Display Unit HDMI Connector
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_HDMICON_H__
-#define __RCAR_DU_HDMICON_H__
-
-struct rcar_du_device;
-struct rcar_du_encoder;
-
-#if IS_ENABLED(CONFIG_DRM_RCAR_HDMI)
-int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc);
-#else
-static inline int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
-					      struct rcar_du_encoder *renc)
-{
-	return -ENOSYS;
-}
-#endif
-
-#endif /* __RCAR_DU_HDMICON_H__ */
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c b/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
index 461662d231e2..4de3ff0dbebd 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c
@@ -16,7 +16,6 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
-#include <drm/drm_encoder_slave.h>
 
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
@@ -25,20 +24,14 @@
 
 struct rcar_du_hdmienc {
 	struct rcar_du_encoder *renc;
-	struct device *dev;
 	bool enabled;
 };
 
 #define to_rcar_hdmienc(e)	(to_rcar_encoder(e)->hdmi)
-#define to_slave_funcs(e)	(to_rcar_encoder(e)->slave.slave_funcs)
 
 static void rcar_du_hdmienc_disable(struct drm_encoder *encoder)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->dpms)
-		sfuncs->dpms(encoder, DRM_MODE_DPMS_OFF);
 
 	if (hdmienc->renc->lvds)
 		rcar_du_lvdsenc_enable(hdmienc->renc->lvds, encoder->crtc,
@@ -50,15 +43,11 @@ static void rcar_du_hdmienc_disable(struct drm_encoder *encoder)
 static void rcar_du_hdmienc_enable(struct drm_encoder *encoder)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
 
 	if (hdmienc->renc->lvds)
 		rcar_du_lvdsenc_enable(hdmienc->renc->lvds, encoder->crtc,
 				       true);
 
-	if (sfuncs->dpms)
-		sfuncs->dpms(encoder, DRM_MODE_DPMS_ON);
-
 	hdmienc->enabled = true;
 }
 
@@ -67,29 +56,21 @@ static int rcar_du_hdmienc_atomic_check(struct drm_encoder *encoder,
 					struct drm_connector_state *conn_state)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
 	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
-	const struct drm_display_mode *mode = &crtc_state->mode;
 
 	if (hdmienc->renc->lvds)
 		rcar_du_lvdsenc_atomic_check(hdmienc->renc->lvds,
 					     adjusted_mode);
 
-	if (sfuncs->mode_fixup == NULL)
-		return 0;
-
-	return sfuncs->mode_fixup(encoder, mode, adjusted_mode) ? 0 : -EINVAL;
+	return 0;
 }
 
+
 static void rcar_du_hdmienc_mode_set(struct drm_encoder *encoder,
 				     struct drm_display_mode *mode,
 				     struct drm_display_mode *adjusted_mode)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->mode_set)
-		sfuncs->mode_set(encoder, mode, adjusted_mode);
 
 	rcar_du_crtc_route_output(encoder->crtc, hdmienc->renc->output);
 }
@@ -109,7 +90,6 @@ static void rcar_du_hdmienc_cleanup(struct drm_encoder *encoder)
 		rcar_du_hdmienc_disable(encoder);
 
 	drm_encoder_cleanup(encoder);
-	put_device(hdmienc->dev);
 }
 
 static const struct drm_encoder_funcs encoder_funcs = {
@@ -120,8 +100,7 @@ int rcar_du_hdmienc_init(struct rcar_du_device *rcdu,
 			 struct rcar_du_encoder *renc, struct device_node *np)
 {
 	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
-	struct drm_i2c_encoder_driver *driver;
-	struct i2c_client *i2c_slave;
+	struct drm_bridge *bridge;
 	struct rcar_du_hdmienc *hdmienc;
 	int ret;
 
@@ -129,44 +108,29 @@ int rcar_du_hdmienc_init(struct rcar_du_device *rcdu,
 	if (hdmienc == NULL)
 		return -ENOMEM;
 
-	/* Locate the slave I2C device and driver. */
-	i2c_slave = of_find_i2c_device_by_node(np);
-	if (!i2c_slave || !i2c_get_clientdata(i2c_slave)) {
-		dev_dbg(rcdu->dev,
-			"can't get I2C slave for %s, deferring probe\n",
-			of_node_full_name(np));
+	/* Locate drm bridge from the hdmi encoder DT node */
+	bridge = of_drm_find_bridge(np);
+	if (!bridge)
 		return -EPROBE_DEFER;
-	}
-
-	hdmienc->dev = &i2c_slave->dev;
-
-	if (hdmienc->dev->driver == NULL) {
-		dev_dbg(rcdu->dev,
-			"I2C slave %s not probed yet, deferring probe\n",
-			dev_name(hdmienc->dev));
-		ret = -EPROBE_DEFER;
-		goto error;
-	}
-
-	/* Initialize the slave encoder. */
-	driver = to_drm_i2c_encoder_driver(to_i2c_driver(hdmienc->dev->driver));
-	ret = driver->encoder_init(i2c_slave, rcdu->ddev, &renc->slave);
-	if (ret < 0)
-		goto error;
 
 	ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
 			       DRM_MODE_ENCODER_TMDS, NULL);
 	if (ret < 0)
-		goto error;
+		return ret;
 
 	drm_encoder_helper_add(encoder, &encoder_helper_funcs);
 
 	renc->hdmi = hdmienc;
 	hdmienc->renc = renc;
 
-	return 0;
+	/* Link drm_bridge to encoder */
+	bridge->encoder = encoder;
+
+	ret = drm_bridge_attach(rcdu->ddev, bridge);
+	if (ret) {
+		drm_encoder_cleanup(encoder);
+		return ret;
+	}
 
-error:
-	put_device(hdmienc->dev);
-	return ret;
+	return 0;
 }