Merge tag 'drm-vc4-next-2015-10-21' of http://github.com/anholt/linux into drm-next

This pull request introduces the vc4 driver, for kernel modesetting on
the Raspberry Pi (bcm2835/bcm2836 architectures).  It currently
supports a display plane and cursor on the HDMI output.  The driver
doesn't do 3D, power management, or overlay planes yet.

[airlied: fixup the enable/disable vblank APIs]

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>

* tag 'drm-vc4-next-2015-10-21' of http://github.com/anholt/linux:
  drm/vc4: Allow vblank to be disabled
  drm/vc4: Use the fbdev_cma helpers
  drm/vc4: Add KMS support for Raspberry Pi.
  drm/vc4: Add devicetree bindings for VC4.

1 files changed, 672 insertions, 0 deletions

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
new file mode 100644
index 000000000000..7a9f4768591e
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -0,0 +1,672 @@
+/*
+ * Copyright (C) 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * DOC: VC4 CRTC module
+ *
+ * In VC4, the Pixel Valve is what most closely corresponds to the
+ * DRM's concept of a CRTC.  The PV generates video timings from the
+ * output's clock plus its configuration.  It pulls scaled pixels from
+ * the HVS at that timing, and feeds it to the encoder.
+ *
+ * However, the DRM CRTC also collects the configuration of all the
+ * DRM planes attached to it.  As a result, this file also manages
+ * setup of the VC4 HVS's display elements on the CRTC.
+ *
+ * The 2835 has 3 different pixel valves.  pv0 in the audio power
+ * domain feeds DSI0 or DPI, while pv1 feeds DS1 or SMI.  pv2 in the
+ * image domain can feed either HDMI or the SDTV controller.  The
+ * pixel valve chooses from the CPRMAN clocks (HSM for HDMI, VEC for
+ * SDTV, etc.) according to which output type is chosen in the mux.
+ *
+ * For power management, the pixel valve's registers are all clocked
+ * by the AXI clock, while the timings and FIFOs make use of the
+ * output-specific clock.  Since the encoders also directly consume
+ * the CPRMAN clocks, and know what timings they need, they are the
+ * ones that set the clock.
+ */
+
+#include "drm_atomic.h"
+#include "drm_atomic_helper.h"
+#include "drm_crtc_helper.h"
+#include "linux/clk.h"
+#include "linux/component.h"
+#include "linux/of_device.h"
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+struct vc4_crtc {
+	struct drm_crtc base;
+	const struct vc4_crtc_data *data;
+	void __iomem *regs;
+
+	/* Which HVS channel we're using for our CRTC. */
+	int channel;
+
+	/* Pointer to the actual hardware display list memory for the
+	 * crtc.
+	 */
+	u32 __iomem *dlist;
+
+	u32 dlist_size; /* in dwords */
+
+	struct drm_pending_vblank_event *event;
+};
+
+static inline struct vc4_crtc *
+to_vc4_crtc(struct drm_crtc *crtc)
+{
+	return (struct vc4_crtc *)crtc;
+}
+
+struct vc4_crtc_data {
+	/* Which channel of the HVS this pixelvalve sources from. */
+	int hvs_channel;
+
+	enum vc4_encoder_type encoder0_type;
+	enum vc4_encoder_type encoder1_type;
+};
+
+#define CRTC_WRITE(offset, val) writel(val, vc4_crtc->regs + (offset))
+#define CRTC_READ(offset) readl(vc4_crtc->regs + (offset))
+
+#define CRTC_REG(reg) { reg, #reg }
+static const struct {
+	u32 reg;
+	const char *name;
+} crtc_regs[] = {
+	CRTC_REG(PV_CONTROL),
+	CRTC_REG(PV_V_CONTROL),
+	CRTC_REG(PV_VSYNCD),
+	CRTC_REG(PV_HORZA),
+	CRTC_REG(PV_HORZB),
+	CRTC_REG(PV_VERTA),
+	CRTC_REG(PV_VERTB),
+	CRTC_REG(PV_VERTA_EVEN),
+	CRTC_REG(PV_VERTB_EVEN),
+	CRTC_REG(PV_INTEN),
+	CRTC_REG(PV_INTSTAT),
+	CRTC_REG(PV_STAT),
+	CRTC_REG(PV_HACT_ACT),
+};
+
+static void vc4_crtc_dump_regs(struct vc4_crtc *vc4_crtc)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) {
+		DRM_INFO("0x%04x (%s): 0x%08x\n",
+			 crtc_regs[i].reg, crtc_regs[i].name,
+			 CRTC_READ(crtc_regs[i].reg));
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+int vc4_crtc_debugfs_regs(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *)m->private;
+	struct drm_device *dev = node->minor->dev;
+	int crtc_index = (uintptr_t)node->info_ent->data;
+	struct drm_crtc *crtc;
+	struct vc4_crtc *vc4_crtc;
+	int i;
+
+	i = 0;
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (i == crtc_index)
+			break;
+		i++;
+	}
+	if (!crtc)
+		return 0;
+	vc4_crtc = to_vc4_crtc(crtc);
+
+	for (i = 0; i < ARRAY_SIZE(crtc_regs); i++) {
+		seq_printf(m, "%s (0x%04x): 0x%08x\n",
+			   crtc_regs[i].name, crtc_regs[i].reg,
+			   CRTC_READ(crtc_regs[i].reg));
+	}
+
+	return 0;
+}
+#endif
+
+static void vc4_crtc_destroy(struct drm_crtc *crtc)
+{
+	drm_crtc_cleanup(crtc);
+}
+
+static u32 vc4_get_fifo_full_level(u32 format)
+{
+	static const u32 fifo_len_bytes = 64;
+	static const u32 hvs_latency_pix = 6;
+
+	switch (format) {
+	case PV_CONTROL_FORMAT_DSIV_16:
+	case PV_CONTROL_FORMAT_DSIC_16:
+		return fifo_len_bytes - 2 * hvs_latency_pix;
+	case PV_CONTROL_FORMAT_DSIV_18:
+		return fifo_len_bytes - 14;
+	case PV_CONTROL_FORMAT_24:
+	case PV_CONTROL_FORMAT_DSIV_24:
+	default:
+		return fifo_len_bytes - 3 * hvs_latency_pix;
+	}
+}
+
+/*
+ * Returns the clock select bit for the connector attached to the
+ * CRTC.
+ */
+static int vc4_get_clock_select(struct drm_crtc *crtc)
+{
+	struct drm_connector *connector;
+
+	drm_for_each_connector(connector, crtc->dev) {
+		if (connector && connector->state->crtc == crtc) {
+			struct drm_encoder *encoder = connector->encoder;
+			struct vc4_encoder *vc4_encoder =
+				to_vc4_encoder(encoder);
+
+			return vc4_encoder->clock_select;
+		}
+	}
+
+	return -1;
+}
+
+static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct drm_crtc_state *state = crtc->state;
+	struct drm_display_mode *mode = &state->adjusted_mode;
+	bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE;
+	u32 vactive = (mode->vdisplay >> (interlace ? 1 : 0));
+	u32 format = PV_CONTROL_FORMAT_24;
+	bool debug_dump_regs = false;
+	int clock_select = vc4_get_clock_select(crtc);
+
+	if (debug_dump_regs) {
+		DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc));
+		vc4_crtc_dump_regs(vc4_crtc);
+	}
+
+	/* Reset the PV fifo. */
+	CRTC_WRITE(PV_CONTROL, 0);
+	CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR | PV_CONTROL_EN);
+	CRTC_WRITE(PV_CONTROL, 0);
+
+	CRTC_WRITE(PV_HORZA,
+		   VC4_SET_FIELD(mode->htotal - mode->hsync_end,
+				 PV_HORZA_HBP) |
+		   VC4_SET_FIELD(mode->hsync_end - mode->hsync_start,
+				 PV_HORZA_HSYNC));
+	CRTC_WRITE(PV_HORZB,
+		   VC4_SET_FIELD(mode->hsync_start - mode->hdisplay,
+				 PV_HORZB_HFP) |
+		   VC4_SET_FIELD(mode->hdisplay, PV_HORZB_HACTIVE));
+
+	if (interlace) {
+		CRTC_WRITE(PV_VERTA_EVEN,
+			   VC4_SET_FIELD(mode->vtotal - mode->vsync_end - 1,
+					 PV_VERTA_VBP) |
+			   VC4_SET_FIELD(mode->vsync_end - mode->vsync_start,
+					 PV_VERTA_VSYNC));
+		CRTC_WRITE(PV_VERTB_EVEN,
+			   VC4_SET_FIELD(mode->vsync_start - mode->vdisplay,
+					 PV_VERTB_VFP) |
+			   VC4_SET_FIELD(vactive, PV_VERTB_VACTIVE));
+	}
+
+	CRTC_WRITE(PV_HACT_ACT, mode->hdisplay);
+
+	CRTC_WRITE(PV_V_CONTROL,
+		   PV_VCONTROL_CONTINUOUS |
+		   (interlace ? PV_VCONTROL_INTERLACE : 0));
+
+	CRTC_WRITE(PV_CONTROL,
+		   VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
+		   VC4_SET_FIELD(vc4_get_fifo_full_level(format),
+				 PV_CONTROL_FIFO_LEVEL) |
+		   PV_CONTROL_CLR_AT_START |
+		   PV_CONTROL_TRIGGER_UNDERFLOW |
+		   PV_CONTROL_WAIT_HSTART |
+		   VC4_SET_FIELD(clock_select, PV_CONTROL_CLK_SELECT) |
+		   PV_CONTROL_FIFO_CLR |
+		   PV_CONTROL_EN);
+
+	if (debug_dump_regs) {
+		DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc));
+		vc4_crtc_dump_regs(vc4_crtc);
+	}
+}
+
+static void require_hvs_enabled(struct drm_device *dev)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+	WARN_ON_ONCE((HVS_READ(SCALER_DISPCTRL) & SCALER_DISPCTRL_ENABLE) !=
+		     SCALER_DISPCTRL_ENABLE);
+}
+
+static void vc4_crtc_disable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	u32 chan = vc4_crtc->channel;
+	int ret;
+	require_hvs_enabled(dev);
+
+	CRTC_WRITE(PV_V_CONTROL,
+		   CRTC_READ(PV_V_CONTROL) & ~PV_VCONTROL_VIDEN);
+	ret = wait_for(!(CRTC_READ(PV_V_CONTROL) & PV_VCONTROL_VIDEN), 1);
+	WARN_ONCE(ret, "Timeout waiting for !PV_VCONTROL_VIDEN\n");
+
+	if (HVS_READ(SCALER_DISPCTRLX(chan)) &
+	    SCALER_DISPCTRLX_ENABLE) {
+		HVS_WRITE(SCALER_DISPCTRLX(chan),
+			  SCALER_DISPCTRLX_RESET);
+
+		/* While the docs say that reset is self-clearing, it
+		 * seems it doesn't actually.
+		 */
+		HVS_WRITE(SCALER_DISPCTRLX(chan), 0);
+	}
+
+	/* Once we leave, the scaler should be disabled and its fifo empty. */
+
+	WARN_ON_ONCE(HVS_READ(SCALER_DISPCTRLX(chan)) & SCALER_DISPCTRLX_RESET);
+
+	WARN_ON_ONCE(VC4_GET_FIELD(HVS_READ(SCALER_DISPSTATX(chan)),
+				   SCALER_DISPSTATX_MODE) !=
+		     SCALER_DISPSTATX_MODE_DISABLED);
+
+	WARN_ON_ONCE((HVS_READ(SCALER_DISPSTATX(chan)) &
+		      (SCALER_DISPSTATX_FULL | SCALER_DISPSTATX_EMPTY)) !=
+		     SCALER_DISPSTATX_EMPTY);
+}
+
+static void vc4_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct drm_crtc_state *state = crtc->state;
+	struct drm_display_mode *mode = &state->adjusted_mode;
+
+	require_hvs_enabled(dev);
+
+	/* Turn on the scaler, which will wait for vstart to start
+	 * compositing.
+	 */
+	HVS_WRITE(SCALER_DISPCTRLX(vc4_crtc->channel),
+		  VC4_SET_FIELD(mode->hdisplay, SCALER_DISPCTRLX_WIDTH) |
+		  VC4_SET_FIELD(mode->vdisplay, SCALER_DISPCTRLX_HEIGHT) |
+		  SCALER_DISPCTRLX_ENABLE);
+
+	/* Turn on the pixel valve, which will emit the vstart signal. */
+	CRTC_WRITE(PV_V_CONTROL,
+		   CRTC_READ(PV_V_CONTROL) | PV_VCONTROL_VIDEN);
+}
+
+static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
+				 struct drm_crtc_state *state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct drm_plane *plane;
+	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	u32 dlist_count = 0;
+
+	/* The pixelvalve can only feed one encoder (and encoders are
+	 * 1:1 with connectors.)
+	 */
+	if (drm_atomic_connectors_for_crtc(state->state, crtc) > 1)
+		return -EINVAL;
+
+	drm_atomic_crtc_state_for_each_plane(plane, state) {
+		struct drm_plane_state *plane_state =
+			state->state->plane_states[drm_plane_index(plane)];
+
+		/* plane might not have changed, in which case take
+		 * current state:
+		 */
+		if (!plane_state)
+			plane_state = plane->state;
+
+		dlist_count += vc4_plane_dlist_size(plane_state);
+	}
+
+	dlist_count++; /* Account for SCALER_CTL0_END. */
+
+	if (!vc4_crtc->dlist || dlist_count > vc4_crtc->dlist_size) {
+		vc4_crtc->dlist = ((u32 __iomem *)vc4->hvs->dlist +
+				   HVS_BOOTLOADER_DLIST_END);
+		vc4_crtc->dlist_size = ((SCALER_DLIST_SIZE >> 2) -
+					HVS_BOOTLOADER_DLIST_END);
+
+		if (dlist_count > vc4_crtc->dlist_size) {
+			DRM_DEBUG_KMS("dlist too large for CRTC (%d > %d).\n",
+				      dlist_count, vc4_crtc->dlist_size);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
+				  struct drm_crtc_state *old_state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct drm_plane *plane;
+	bool debug_dump_regs = false;
+	u32 __iomem *dlist_next = vc4_crtc->dlist;
+
+	if (debug_dump_regs) {
+		DRM_INFO("CRTC %d HVS before:\n", drm_crtc_index(crtc));
+		vc4_hvs_dump_state(dev);
+	}
+
+	/* Copy all the active planes' dlist contents to the hardware dlist.
+	 *
+	 * XXX: If the new display list was large enough that it
+	 * overlapped a currently-read display list, we need to do
+	 * something like disable scanout before putting in the new
+	 * list.  For now, we're safe because we only have the two
+	 * planes.
+	 */
+	drm_atomic_crtc_for_each_plane(plane, crtc) {
+		dlist_next += vc4_plane_write_dlist(plane, dlist_next);
+	}
+
+	if (dlist_next == vc4_crtc->dlist) {
+		/* If no planes were enabled, use the SCALER_CTL0_END
+		 * at the start of the display list memory (in the
+		 * bootloader section).  We'll rewrite that
+		 * SCALER_CTL0_END, just in case, though.
+		 */
+		writel(SCALER_CTL0_END, vc4->hvs->dlist);
+		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel), 0);
+	} else {
+		writel(SCALER_CTL0_END, dlist_next);
+		dlist_next++;
+
+		HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+			  (u32 *)vc4_crtc->dlist - (u32 *)vc4->hvs->dlist);
+
+		/* Make the next display list start after ours. */
+		vc4_crtc->dlist_size -= (dlist_next - vc4_crtc->dlist);
+		vc4_crtc->dlist = dlist_next;
+	}
+
+	if (debug_dump_regs) {
+		DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
+		vc4_hvs_dump_state(dev);
+	}
+
+	if (crtc->state->event) {
+		unsigned long flags;
+
+		crtc->state->event->pipe = drm_crtc_index(crtc);
+
+		WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+		spin_lock_irqsave(&dev->event_lock, flags);
+		vc4_crtc->event = crtc->state->event;
+		spin_unlock_irqrestore(&dev->event_lock, flags);
+		crtc->state->event = NULL;
+	}
+}
+
+int vc4_enable_vblank(struct drm_device *dev, unsigned int crtc_id)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
+
+	CRTC_WRITE(PV_INTEN, PV_INT_VFP_START);
+
+	return 0;
+}
+
+void vc4_disable_vblank(struct drm_device *dev, unsigned int crtc_id)
+{
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct vc4_crtc *vc4_crtc = vc4->crtc[crtc_id];
+
+	CRTC_WRITE(PV_INTEN, 0);
+}
+
+static void vc4_crtc_handle_page_flip(struct vc4_crtc *vc4_crtc)
+{
+	struct drm_crtc *crtc = &vc4_crtc->base;
+	struct drm_device *dev = crtc->dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+	if (vc4_crtc->event) {
+		drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
+		vc4_crtc->event = NULL;
+	}
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+static irqreturn_t vc4_crtc_irq_handler(int irq, void *data)
+{
+	struct vc4_crtc *vc4_crtc = data;
+	u32 stat = CRTC_READ(PV_INTSTAT);
+	irqreturn_t ret = IRQ_NONE;
+
+	if (stat & PV_INT_VFP_START) {
+		CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
+		drm_crtc_handle_vblank(&vc4_crtc->base);
+		vc4_crtc_handle_page_flip(vc4_crtc);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static const struct drm_crtc_funcs vc4_crtc_funcs = {
+	.set_config = drm_atomic_helper_set_config,
+	.destroy = vc4_crtc_destroy,
+	.page_flip = drm_atomic_helper_page_flip,
+	.set_property = NULL,
+	.cursor_set = NULL, /* handled by drm_mode_cursor_universal */
+	.cursor_move = NULL, /* handled by drm_mode_cursor_universal */
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static const struct drm_crtc_helper_funcs vc4_crtc_helper_funcs = {
+	.mode_set_nofb = vc4_crtc_mode_set_nofb,
+	.disable = vc4_crtc_disable,
+	.enable = vc4_crtc_enable,
+	.atomic_check = vc4_crtc_atomic_check,
+	.atomic_flush = vc4_crtc_atomic_flush,
+};
+
+/* Frees the page flip event when the DRM device is closed with the
+ * event still outstanding.
+ */
+void vc4_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file)
+{
+	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->event_lock, flags);
+
+	if (vc4_crtc->event && vc4_crtc->event->base.file_priv == file) {
+		vc4_crtc->event->base.destroy(&vc4_crtc->event->base);
+		drm_crtc_vblank_put(crtc);
+		vc4_crtc->event = NULL;
+	}
+
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+static const struct vc4_crtc_data pv0_data = {
+	.hvs_channel = 0,
+	.encoder0_type = VC4_ENCODER_TYPE_DSI0,
+	.encoder1_type = VC4_ENCODER_TYPE_DPI,
+};
+
+static const struct vc4_crtc_data pv1_data = {
+	.hvs_channel = 2,
+	.encoder0_type = VC4_ENCODER_TYPE_DSI1,
+	.encoder1_type = VC4_ENCODER_TYPE_SMI,
+};
+
+static const struct vc4_crtc_data pv2_data = {
+	.hvs_channel = 1,
+	.encoder0_type = VC4_ENCODER_TYPE_VEC,
+	.encoder1_type = VC4_ENCODER_TYPE_HDMI,
+};
+
+static const struct of_device_id vc4_crtc_dt_match[] = {
+	{ .compatible = "brcm,bcm2835-pixelvalve0", .data = &pv0_data },
+	{ .compatible = "brcm,bcm2835-pixelvalve1", .data = &pv1_data },
+	{ .compatible = "brcm,bcm2835-pixelvalve2", .data = &pv2_data },
+	{}
+};
+
+static void vc4_set_crtc_possible_masks(struct drm_device *drm,
+					struct drm_crtc *crtc)
+{
+	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
+	struct drm_encoder *encoder;
+
+	drm_for_each_encoder(encoder, drm) {
+		struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder);
+
+		if (vc4_encoder->type == vc4_crtc->data->encoder0_type) {
+			vc4_encoder->clock_select = 0;
+			encoder->possible_crtcs |= drm_crtc_mask(crtc);
+		} else if (vc4_encoder->type == vc4_crtc->data->encoder1_type) {
+			vc4_encoder->clock_select = 1;
+			encoder->possible_crtcs |= drm_crtc_mask(crtc);
+		}
+	}
+}
+
+static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_device *drm = dev_get_drvdata(master);
+	struct vc4_dev *vc4 = to_vc4_dev(drm);
+	struct vc4_crtc *vc4_crtc;
+	struct drm_crtc *crtc;
+	struct drm_plane *primary_plane, *cursor_plane;
+	const struct of_device_id *match;
+	int ret;
+
+	vc4_crtc = devm_kzalloc(dev, sizeof(*vc4_crtc), GFP_KERNEL);
+	if (!vc4_crtc)
+		return -ENOMEM;
+	crtc = &vc4_crtc->base;
+
+	match = of_match_device(vc4_crtc_dt_match, dev);
+	if (!match)
+		return -ENODEV;
+	vc4_crtc->data = match->data;
+
+	vc4_crtc->regs = vc4_ioremap_regs(pdev, 0);
+	if (IS_ERR(vc4_crtc->regs))
+		return PTR_ERR(vc4_crtc->regs);
+
+	/* For now, we create just the primary and the legacy cursor
+	 * planes.  We should be able to stack more planes on easily,
+	 * but to do that we would need to compute the bandwidth
+	 * requirement of the plane configuration, and reject ones
+	 * that will take too much.
+	 */
+	primary_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_PRIMARY);
+	if (!primary_plane) {
+		dev_err(dev, "failed to construct primary plane\n");
+		ret = PTR_ERR(primary_plane);
+		goto err;
+	}
+
+	cursor_plane = vc4_plane_init(drm, DRM_PLANE_TYPE_CURSOR);
+	if (!cursor_plane) {
+		dev_err(dev, "failed to construct cursor plane\n");
+		ret = PTR_ERR(cursor_plane);
+		goto err_primary;
+	}
+
+	drm_crtc_init_with_planes(drm, crtc, primary_plane, cursor_plane,
+				  &vc4_crtc_funcs);
+	drm_crtc_helper_add(crtc, &vc4_crtc_helper_funcs);
+	primary_plane->crtc = crtc;
+	cursor_plane->crtc = crtc;
+	vc4->crtc[drm_crtc_index(crtc)] = vc4_crtc;
+	vc4_crtc->channel = vc4_crtc->data->hvs_channel;
+
+	CRTC_WRITE(PV_INTEN, 0);
+	CRTC_WRITE(PV_INTSTAT, PV_INT_VFP_START);
+	ret = devm_request_irq(dev, platform_get_irq(pdev, 0),
+			       vc4_crtc_irq_handler, 0, "vc4 crtc", vc4_crtc);
+	if (ret)
+		goto err_cursor;
+
+	vc4_set_crtc_possible_masks(drm, crtc);
+
+	platform_set_drvdata(pdev, vc4_crtc);
+
+	return 0;
+
+err_cursor:
+	cursor_plane->funcs->destroy(cursor_plane);
+err_primary:
+	primary_plane->funcs->destroy(primary_plane);
+err:
+	return ret;
+}
+
+static void vc4_crtc_unbind(struct device *dev, struct device *master,
+			    void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vc4_crtc *vc4_crtc = dev_get_drvdata(dev);
+
+	vc4_crtc_destroy(&vc4_crtc->base);
+
+	CRTC_WRITE(PV_INTEN, 0);
+
+	platform_set_drvdata(pdev, NULL);
+}
+
+static const struct component_ops vc4_crtc_ops = {
+	.bind   = vc4_crtc_bind,
+	.unbind = vc4_crtc_unbind,
+};
+
+static int vc4_crtc_dev_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &vc4_crtc_ops);
+}
+
+static int vc4_crtc_dev_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &vc4_crtc_ops);
+	return 0;
+}
+
+struct platform_driver vc4_crtc_driver = {
+	.probe = vc4_crtc_dev_probe,
+	.remove = vc4_crtc_dev_remove,
+	.driver = {
+		.name = "vc4_crtc",
+		.of_match_table = vc4_crtc_dt_match,
+	},
+};