Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.6:

UAPI Changes:
- Add support for DMA-BUF HEAPS.

Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.

Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.

Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com

2 files changed, 22 insertions, 16 deletions

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 536ba93b0f46..413987038fbf 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /* Copyright 2019 Collabora ltd. */
 #include <linux/devfreq.h>
+#include <linux/devfreq_cooling.h>
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
 #include <linux/clk.h>
@@ -74,8 +75,11 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	int ret;
 	struct dev_pm_opp *opp;
 	unsigned long cur_freq;
+	struct device *dev = &pfdev->pdev->dev;
+	struct devfreq *devfreq;
+	struct thermal_cooling_device *cooling;
 
-	ret = dev_pm_opp_of_add_table(&pfdev->pdev->dev);
+	ret = dev_pm_opp_of_add_table(dev);
 	if (ret == -ENODEV) /* Optional, continue without devfreq */
 		return 0;
 	else if (ret)
@@ -85,29 +89,35 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 
 	cur_freq = clk_get_rate(pfdev->clock);
 
-	opp = devfreq_recommended_opp(&pfdev->pdev->dev, &cur_freq, 0);
+	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
 	if (IS_ERR(opp))
 		return PTR_ERR(opp);
 
 	panfrost_devfreq_profile.initial_freq = cur_freq;
 	dev_pm_opp_put(opp);
 
-	pfdev->devfreq.devfreq = devm_devfreq_add_device(&pfdev->pdev->dev,
-			&panfrost_devfreq_profile, DEVFREQ_GOV_SIMPLE_ONDEMAND,
-			NULL);
-	if (IS_ERR(pfdev->devfreq.devfreq)) {
-		DRM_DEV_ERROR(&pfdev->pdev->dev, "Couldn't initialize GPU devfreq\n");
-		ret = PTR_ERR(pfdev->devfreq.devfreq);
-		pfdev->devfreq.devfreq = NULL;
-		dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
-		return ret;
+	devfreq = devm_devfreq_add_device(dev, &panfrost_devfreq_profile,
+					  DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);
+	if (IS_ERR(devfreq)) {
+		DRM_DEV_ERROR(dev, "Couldn't initialize GPU devfreq\n");
+		dev_pm_opp_of_remove_table(dev);
+		return PTR_ERR(devfreq);
 	}
+	pfdev->devfreq.devfreq = devfreq;
+
+	cooling = of_devfreq_cooling_register(dev->of_node, devfreq);
+	if (IS_ERR(cooling))
+		DRM_DEV_INFO(dev, "Failed to register cooling device\n");
+	else
+		pfdev->devfreq.cooling = cooling;
 
 	return 0;
 }
 
 void panfrost_devfreq_fini(struct panfrost_device *pfdev)
 {
+	if (pfdev->devfreq.cooling)
+		devfreq_cooling_unregister(pfdev->devfreq.cooling);
 	dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
 }
 
diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index f61364f7c471..48e3c4165247 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -453,15 +453,11 @@ panfrost_postclose(struct drm_device *dev, struct drm_file *file)
 	kfree(panfrost_priv);
 }
 
-/* DRM_AUTH is required on SUBMIT for now, while all clients share a single
- * address space.  Note that render nodes would be able to submit jobs that
- * could access BOs from clients authenticated with the master node.
- */
 static const struct drm_ioctl_desc panfrost_drm_driver_ioctls[] = {
 #define PANFROST_IOCTL(n, func, flags) \
 	DRM_IOCTL_DEF_DRV(PANFROST_##n, panfrost_ioctl_##func, flags)
 
-	PANFROST_IOCTL(SUBMIT,		submit,		DRM_RENDER_ALLOW | DRM_AUTH),
+	PANFROST_IOCTL(SUBMIT,		submit,		DRM_RENDER_ALLOW),
 	PANFROST_IOCTL(WAIT_BO,		wait_bo,	DRM_RENDER_ALLOW),
 	PANFROST_IOCTL(CREATE_BO,	create_bo,	DRM_RENDER_ALLOW),
 	PANFROST_IOCTL(MMAP_BO,		mmap_bo,	DRM_RENDER_ALLOW),