Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for the 5.1 merge window.

  The big changes I'd highlight are:
   - nouveau has HMM support now, there is finally an in-tree user so we
     can quieten down the rip it out people.
   - i915 now enables fastboot by default on Skylake+
   - Displayport Multistream support has been refactored and should
     hopefully be more reliable.

  Core:
   - header cleanups aiming towards removing drmP.h
   - dma-buf fence seqnos to 64-bits
   - common helper for DP mst hotplug for radeon,i915,amdgpu + new
     refcounting scheme
   - MST i2c improvements
   - drm_syncobj_cb removal
   - ARM FB compression fourcc
   - P010 + P016 fourcc
   - allwinner tiled format modifier
   - i2c over aux I2C_M_STOP support
   - DRM_AUTH handling fixes

  TTM:
   - ref/unref renaming

  New driver:
   - ARM komeda display driver

  scheduler:
   - refactor mirror list handling
   - rework hw fence processing
   - 0 run queue entity fix

  bridge:
   - TI DS90C185 LVDS bridge
   - thc631lvdm83d bridge improvements
   - cadence + allwinner DSI ported to generic phy

  panels:
   - Sitronix ST7701 panel
   - Kingdisplay KD097D04
   - LeMaker BL035-RGB-002
   - PDA 91-00156-A0
   - Innolux EE101IA-01D

  i915:
   - Enable fastboot by default on SKL+/VLV/CHV
   - Export RPCS configuration for ICL media driver
   - Coffelake PCI ID
   - CNL clocks setup fixes
   - ACPI/PMIC support for MIPI/DSI
   - Per-engine WA init for all engines
   - Shrinker locking fixes
   - Kerneldoc updates
   - Lots of ring improvements and reset fixes
   - Coffeelake GVT Support
   - VFIO GVT EDID Region support
   - runtime PM wakeref tracking
   - ILK->IVB primary plane enable delays
   - userptr mutex locking fixes
   - DSI fixes
   - LVDS/TV cleanups
   - HW readout fixes
   - LUT robustness fixes
   - ICL display and watermark fixes
   - gem mmap race fix

  amdgpu:
   - add scheduled dependencies interface
   - DCC on scanout surfaces
   - vega10/20 BACO support
   - Multiple IH rings on soc15
   - XGMI locking fixes
   - DC i2c/aux cleanups
   - runtime SMU debug interface
   - Kexec improvmeents
   - SR-IOV fixes
   - DC freesync + ABM fixes
   - GDS fixes
   - GPUVM fixes
   - vega20 PCIE DPM switching fixes
   - Context priority handling fixes

  radeon:
   - fix missing break in evergreen parser

  nouveau:
   - SVM support via HMM

  msm:
   - QCOM Compressed modifier support

  exynos:
   - s5pv210 rotator support

  imx:
   - zpos property support
   - pending update fixes

  v3d:
   - cache flush improvments

  vc4:
   - reflection support
   - HDMI overscan support

  tegra:
   - CEC refactoring
   - HDMI audio fixes
   - Tegra186 prep work
   - SOR crossbar device tree fixes

  sun4i:
   - implicit fencing support
   - YUV and scalar support improvements
   - A23 support
   - tiling fixes

  atmel-hlcdc:
   - clipping and rotation property fixes

  qxl:
   - BO and PRIME improvements
   - generic fbdev emulation

  dw-hdmi:
   - HDMI 2.0 2160p
   - YUV420 ouput

  rockchip:
   - implicit fencing support
   - reflection proerties

  virtio-gpu:
   - use generic fbdev emulation

  tilcdc:
   - cpufreq vs crtc init fix

  rcar-du:
   - R8A774C0 support
   - D3/E3 RGB output routing fixes and DPAD0 support
   - RA87744 LVDS support

  bochs:
   - atomic and generic fbdev emulation
   - ID mismatch error on bochs load

  meson:
   - remove firmware fbs"

* tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
  drm/amd/display: Use vrr friendly pageflip throttling in DC.
  drm/imx: only send commit done event when all state has been applied
  drm/imx: allow building under COMPILE_TEST
  drm/imx: imx-tve: depend on COMMON_CLK
  drm/imx: ipuv3-plane: add zpos property
  drm/imx: ipuv3-plane: add function to query atomic update status
  gpu: ipu-v3: prg: add function to get channel configure status
  gpu: ipu-v3: pre: add double buffer status readback
  drm/amdgpu: Bump amdgpu version for context priority override.
  drm/amdgpu/powerplay: fix typo in BACO header guards
  drm/amdgpu/powerplay: fix return codes in BACO code
  drm/amdgpu: add missing license on baco files
  drm/bochs: Fix the ID mismatch error
  drm/nouveau/dmem: use dma addresses during migration copies
  drm/nouveau/dmem: use physical vram addresses during migration copies
  drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
  drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
  drm/nouveau/dmem: device memory helpers for SVM
  drm/nouveau/svm: initial support for shared virtual memory
  drm/nouveau: prepare for enabling svm with existing userspace interfaces
  ...

7 files changed, 1487 insertions, 6 deletions

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 3f3537719beb..3e070153ef21 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -77,6 +77,17 @@ config DRM_PANEL_JDI_LT070ME05000
 	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
 	  24 bit per pixel.
 
+config DRM_PANEL_KINGDISPLAY_KD097D04
+	tristate "Kingdisplay kd097d04 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Kingdisplay kd097d04
+	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host and has a built-in LED backlight.
+
 config DRM_PANEL_SAMSUNG_LD9040
 	tristate "Samsung LD9040 RGB/SPI panel"
 	depends on OF && SPI
@@ -196,6 +207,16 @@ config DRM_PANEL_SHARP_LS043T1LE01
 	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
 	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
 
+config DRM_PANEL_SITRONIX_ST7701
+	tristate "Sitronix ST7701 panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the Sitronix
+	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
+	  system interfaces.
+
 config DRM_PANEL_SITRONIX_ST7789V
 	tristate "Sitronix ST7789V panel"
 	depends on OF && SPI
@@ -204,6 +225,15 @@ config DRM_PANEL_SITRONIX_ST7789V
 	  Say Y here if you want to enable support for the Sitronix
 	  ST7789V controller for 240x320 LCD panels
 
+config DRM_PANEL_TPO_TPG110
+	tristate "TPO TPG 800x400 panel"
+	depends on OF && SPI && GPIOLIB
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for TPO TPG110
+	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
+	  800x400 LCD panels.
+
 config DRM_PANEL_TRULY_NT35597_WQXGA
 	tristate "Truly WQXGA"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 4396658a7996..e7ab71968bbf 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
 obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
+obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
 obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
@@ -20,5 +21,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
 obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index ca4ae45dd307..8e5724b63f1f 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
@@ -70,18 +70,12 @@ static inline struct innolux_panel *to_innolux_panel(struct drm_panel *panel)
 static int innolux_panel_disable(struct drm_panel *panel)
 {
 	struct innolux_panel *innolux = to_innolux_panel(panel);
-	int err;
 
 	if (!innolux->enabled)
 		return 0;
 
 	backlight_disable(innolux->backlight);
 
-	err = mipi_dsi_dcs_set_display_off(innolux->link);
-	if (err < 0)
-		DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
-			      err);
-
 	innolux->enabled = false;
 
 	return 0;
@@ -95,6 +89,11 @@ static int innolux_panel_unprepare(struct drm_panel *panel)
 	if (!innolux->prepared)
 		return 0;
 
+	err = mipi_dsi_dcs_set_display_off(innolux->link);
+	if (err < 0)
+		DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
+			      err);
+
 	err = mipi_dsi_dcs_enter_sleep_mode(innolux->link);
 	if (err < 0) {
 		DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
diff --git a/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
new file mode 100644
index 000000000000..2a25a914d09e
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct kingdisplay_panel {
+	struct drm_panel base;
+	struct mipi_dsi_device *link;
+
+	struct backlight_device *backlight;
+	struct regulator *supply;
+	struct gpio_desc *enable_gpio;
+
+	bool prepared;
+	bool enabled;
+};
+
+struct kingdisplay_panel_cmd {
+	char cmd;
+	char data;
+};
+
+/*
+ * According to the discussion on
+ * https://review.coreboot.org/#/c/coreboot/+/22472/
+ * the panel init array is not part of the panels datasheet but instead
+ * just came in this form from the panel vendor.
+ */
+static const struct kingdisplay_panel_cmd init_code[] = {
+	/* voltage setting */
+	{ 0xB0, 0x00 },
+	{ 0xB2, 0x02 },
+	{ 0xB3, 0x11 },
+	{ 0xB4, 0x00 },
+	{ 0xB6, 0x80 },
+	/* VCOM disable */
+	{ 0xB7, 0x02 },
+	{ 0xB8, 0x80 },
+	{ 0xBA, 0x43 },
+	/* VCOM setting */
+	{ 0xBB, 0x53 },
+	/* VSP setting */
+	{ 0xBC, 0x0A },
+	/* VSN setting */
+	{ 0xBD, 0x4A },
+	/* VGH setting */
+	{ 0xBE, 0x2F },
+	/* VGL setting */
+	{ 0xBF, 0x1A },
+	{ 0xF0, 0x39 },
+	{ 0xF1, 0x22 },
+	/* Gamma setting */
+	{ 0xB0, 0x02 },
+	{ 0xC0, 0x00 },
+	{ 0xC1, 0x01 },
+	{ 0xC2, 0x0B },
+	{ 0xC3, 0x15 },
+	{ 0xC4, 0x22 },
+	{ 0xC5, 0x11 },
+	{ 0xC6, 0x15 },
+	{ 0xC7, 0x19 },
+	{ 0xC8, 0x1A },
+	{ 0xC9, 0x16 },
+	{ 0xCA, 0x18 },
+	{ 0xCB, 0x13 },
+	{ 0xCC, 0x18 },
+	{ 0xCD, 0x13 },
+	{ 0xCE, 0x1C },
+	{ 0xCF, 0x19 },
+	{ 0xD0, 0x21 },
+	{ 0xD1, 0x2C },
+	{ 0xD2, 0x2F },
+	{ 0xD3, 0x30 },
+	{ 0xD4, 0x19 },
+	{ 0xD5, 0x1F },
+	{ 0xD6, 0x00 },
+	{ 0xD7, 0x01 },
+	{ 0xD8, 0x0B },
+	{ 0xD9, 0x15 },
+	{ 0xDA, 0x22 },
+	{ 0xDB, 0x11 },
+	{ 0xDC, 0x15 },
+	{ 0xDD, 0x19 },
+	{ 0xDE, 0x1A },
+	{ 0xDF, 0x16 },
+	{ 0xE0, 0x18 },
+	{ 0xE1, 0x13 },
+	{ 0xE2, 0x18 },
+	{ 0xE3, 0x13 },
+	{ 0xE4, 0x1C },
+	{ 0xE5, 0x19 },
+	{ 0xE6, 0x21 },
+	{ 0xE7, 0x2C },
+	{ 0xE8, 0x2F },
+	{ 0xE9, 0x30 },
+	{ 0xEA, 0x19 },
+	{ 0xEB, 0x1F },
+	/* GOA MUX setting */
+	{ 0xB0, 0x01 },
+	{ 0xC0, 0x10 },
+	{ 0xC1, 0x0F },
+	{ 0xC2, 0x0E },
+	{ 0xC3, 0x0D },
+	{ 0xC4, 0x0C },
+	{ 0xC5, 0x0B },
+	{ 0xC6, 0x0A },
+	{ 0xC7, 0x09 },
+	{ 0xC8, 0x08 },
+	{ 0xC9, 0x07 },
+	{ 0xCA, 0x06 },
+	{ 0xCB, 0x05 },
+	{ 0xCC, 0x00 },
+	{ 0xCD, 0x01 },
+	{ 0xCE, 0x02 },
+	{ 0xCF, 0x03 },
+	{ 0xD0, 0x04 },
+	{ 0xD6, 0x10 },
+	{ 0xD7, 0x0F },
+	{ 0xD8, 0x0E },
+	{ 0xD9, 0x0D },
+	{ 0xDA, 0x0C },
+	{ 0xDB, 0x0B },
+	{ 0xDC, 0x0A },
+	{ 0xDD, 0x09 },
+	{ 0xDE, 0x08 },
+	{ 0xDF, 0x07 },
+	{ 0xE0, 0x06 },
+	{ 0xE1, 0x05 },
+	{ 0xE2, 0x00 },
+	{ 0xE3, 0x01 },
+	{ 0xE4, 0x02 },
+	{ 0xE5, 0x03 },
+	{ 0xE6, 0x04 },
+	{ 0xE7, 0x00 },
+	{ 0xEC, 0xC0 },
+	/* GOA timing setting */
+	{ 0xB0, 0x03 },
+	{ 0xC0, 0x01 },
+	{ 0xC2, 0x6F },
+	{ 0xC3, 0x6F },
+	{ 0xC5, 0x36 },
+	{ 0xC8, 0x08 },
+	{ 0xC9, 0x04 },
+	{ 0xCA, 0x41 },
+	{ 0xCC, 0x43 },
+	{ 0xCF, 0x60 },
+	{ 0xD2, 0x04 },
+	{ 0xD3, 0x04 },
+	{ 0xD4, 0x03 },
+	{ 0xD5, 0x02 },
+	{ 0xD6, 0x01 },
+	{ 0xD7, 0x00 },
+	{ 0xDB, 0x01 },
+	{ 0xDE, 0x36 },
+	{ 0xE6, 0x6F },
+	{ 0xE7, 0x6F },
+	/* GOE setting */
+	{ 0xB0, 0x06 },
+	{ 0xB8, 0xA5 },
+	{ 0xC0, 0xA5 },
+	{ 0xD5, 0x3F },
+};
+
+static inline
+struct kingdisplay_panel *to_kingdisplay_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct kingdisplay_panel, base);
+}
+
+static int kingdisplay_panel_disable(struct drm_panel *panel)
+{
+	struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
+	int err;
+
+	if (!kingdisplay->enabled)
+		return 0;
+
+	backlight_disable(kingdisplay->backlight);
+
+	err = mipi_dsi_dcs_set_display_off(kingdisplay->link);
+	if (err < 0)
+		DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
+			      err);
+
+	kingdisplay->enabled = false;
+
+	return 0;
+}
+
+static int kingdisplay_panel_unprepare(struct drm_panel *panel)
+{
+	struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
+	int err;
+
+	if (!kingdisplay->prepared)
+		return 0;
+
+	err = mipi_dsi_dcs_enter_sleep_mode(kingdisplay->link);
+	if (err < 0) {
+		DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
+			      err);
+		return err;
+	}
+
+	/* T15: 120ms */
+	msleep(120);
+
+	gpiod_set_value_cansleep(kingdisplay->enable_gpio, 0);
+
+	err = regulator_disable(kingdisplay->supply);
+	if (err < 0)
+		return err;
+
+	kingdisplay->prepared = false;
+
+	return 0;
+}
+
+static int kingdisplay_panel_prepare(struct drm_panel *panel)
+{
+	struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
+	int err, regulator_err;
+	unsigned int i;
+
+	if (kingdisplay->prepared)
+		return 0;
+
+	gpiod_set_value_cansleep(kingdisplay->enable_gpio, 0);
+
+	err = regulator_enable(kingdisplay->supply);
+	if (err < 0)
+		return err;
+
+	/* T2: 15ms */
+	usleep_range(15000, 16000);
+
+	gpiod_set_value_cansleep(kingdisplay->enable_gpio, 1);
+
+	/* T4: 15ms */
+	usleep_range(15000, 16000);
+
+	for (i = 0; i < ARRAY_SIZE(init_code); i++) {
+		err = mipi_dsi_generic_write(kingdisplay->link, &init_code[i],
+					sizeof(struct kingdisplay_panel_cmd));
+		if (err < 0) {
+			DRM_DEV_ERROR(panel->dev, "failed write init cmds: %d\n",
+				      err);
+			goto poweroff;
+		}
+	}
+
+	err = mipi_dsi_dcs_exit_sleep_mode(kingdisplay->link);
+	if (err < 0) {
+		DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
+			      err);
+		goto poweroff;
+	}
+
+	/* T6: 120ms */
+	msleep(120);
+
+	err = mipi_dsi_dcs_set_display_on(kingdisplay->link);
+	if (err < 0) {
+		DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
+			      err);
+		goto poweroff;
+	}
+
+	/* T7: 10ms */
+	usleep_range(10000, 11000);
+
+	kingdisplay->prepared = true;
+
+	return 0;
+
+poweroff:
+	gpiod_set_value_cansleep(kingdisplay->enable_gpio, 0);
+
+	regulator_err = regulator_disable(kingdisplay->supply);
+	if (regulator_err)
+		DRM_DEV_ERROR(panel->dev, "failed to disable regulator: %d\n",
+			      regulator_err);
+
+	return err;
+}
+
+static int kingdisplay_panel_enable(struct drm_panel *panel)
+{
+	struct kingdisplay_panel *kingdisplay = to_kingdisplay_panel(panel);
+	int ret;
+
+	if (kingdisplay->enabled)
+		return 0;
+
+	ret = backlight_enable(kingdisplay->backlight);
+	if (ret) {
+		DRM_DEV_ERROR(panel->drm->dev,
+			      "Failed to enable backlight %d\n", ret);
+		return ret;
+	}
+
+	kingdisplay->enabled = true;
+
+	return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+	.clock = 229000,
+	.hdisplay = 1536,
+	.hsync_start = 1536 + 100,
+	.hsync_end = 1536 + 100 + 24,
+	.htotal = 1536 + 100 + 24 + 100,
+	.vdisplay = 2048,
+	.vsync_start = 2048 + 95,
+	.vsync_end = 2048 + 95 + 2,
+	.vtotal = 2048 + 95 + 2 + 23,
+	.vrefresh = 60,
+};
+
+static int kingdisplay_panel_get_modes(struct drm_panel *panel)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		DRM_DEV_ERROR(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
+			      default_mode.hdisplay, default_mode.vdisplay,
+			      default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = 147;
+	panel->connector->display_info.height_mm = 196;
+	panel->connector->display_info.bpc = 8;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs kingdisplay_panel_funcs = {
+	.disable = kingdisplay_panel_disable,
+	.unprepare = kingdisplay_panel_unprepare,
+	.prepare = kingdisplay_panel_prepare,
+	.enable = kingdisplay_panel_enable,
+	.get_modes = kingdisplay_panel_get_modes,
+};
+
+static const struct of_device_id kingdisplay_of_match[] = {
+	{ .compatible = "kingdisplay,kd097d04", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, kingdisplay_of_match);
+
+static int kingdisplay_panel_add(struct kingdisplay_panel *kingdisplay)
+{
+	struct device *dev = &kingdisplay->link->dev;
+	int err;
+
+	kingdisplay->supply = devm_regulator_get(dev, "power");
+	if (IS_ERR(kingdisplay->supply))
+		return PTR_ERR(kingdisplay->supply);
+
+	kingdisplay->enable_gpio = devm_gpiod_get_optional(dev, "enable",
+							   GPIOD_OUT_HIGH);
+	if (IS_ERR(kingdisplay->enable_gpio)) {
+		err = PTR_ERR(kingdisplay->enable_gpio);
+		dev_dbg(dev, "failed to get enable gpio: %d\n", err);
+		kingdisplay->enable_gpio = NULL;
+	}
+
+	kingdisplay->backlight = devm_of_find_backlight(dev);
+	if (IS_ERR(kingdisplay->backlight))
+		return PTR_ERR(kingdisplay->backlight);
+
+	drm_panel_init(&kingdisplay->base);
+	kingdisplay->base.funcs = &kingdisplay_panel_funcs;
+	kingdisplay->base.dev = &kingdisplay->link->dev;
+
+	return drm_panel_add(&kingdisplay->base);
+}
+
+static void kingdisplay_panel_del(struct kingdisplay_panel *kingdisplay)
+{
+	drm_panel_remove(&kingdisplay->base);
+}
+
+static int kingdisplay_panel_probe(struct mipi_dsi_device *dsi)
+{
+	struct kingdisplay_panel *kingdisplay;
+	int err;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_LPM;
+
+	kingdisplay = devm_kzalloc(&dsi->dev, sizeof(*kingdisplay), GFP_KERNEL);
+	if (!kingdisplay)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, kingdisplay);
+	kingdisplay->link = dsi;
+
+	err = kingdisplay_panel_add(kingdisplay);
+	if (err < 0)
+		return err;
+
+	return mipi_dsi_attach(dsi);
+}
+
+static int kingdisplay_panel_remove(struct mipi_dsi_device *dsi)
+{
+	struct kingdisplay_panel *kingdisplay = mipi_dsi_get_drvdata(dsi);
+	int err;
+
+	err = kingdisplay_panel_unprepare(&kingdisplay->base);
+	if (err < 0)
+		DRM_DEV_ERROR(&dsi->dev, "failed to unprepare panel: %d\n",
+			      err);
+
+	err = kingdisplay_panel_disable(&kingdisplay->base);
+	if (err < 0)
+		DRM_DEV_ERROR(&dsi->dev, "failed to disable panel: %d\n", err);
+
+	err = mipi_dsi_detach(dsi);
+	if (err < 0)
+		DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
+			      err);
+
+	kingdisplay_panel_del(kingdisplay);
+
+	return 0;
+}
+
+static void kingdisplay_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct kingdisplay_panel *kingdisplay = mipi_dsi_get_drvdata(dsi);
+
+	kingdisplay_panel_unprepare(&kingdisplay->base);
+	kingdisplay_panel_disable(&kingdisplay->base);
+}
+
+static struct mipi_dsi_driver kingdisplay_panel_driver = {
+	.driver = {
+		.name = "panel-kingdisplay-kd097d04",
+		.of_match_table = kingdisplay_of_match,
+	},
+	.probe = kingdisplay_panel_probe,
+	.remove = kingdisplay_panel_remove,
+	.shutdown = kingdisplay_panel_shutdown,
+};
+module_mipi_dsi_driver(kingdisplay_panel_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Nickey Yang <nickey.yang@rock-chips.com>");
+MODULE_DESCRIPTION("kingdisplay KD097D04 panel driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 9c69e739a524..9e8218f6a3f2 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1597,6 +1597,30 @@ static const struct panel_desc kyo_tcg121xglp = {
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
 };
 
+static const struct drm_display_mode lemaker_bl035_rgb_002_mode = {
+	.clock = 7000,
+	.hdisplay = 320,
+	.hsync_start = 320 + 20,
+	.hsync_end = 320 + 20 + 30,
+	.htotal = 320 + 20 + 30 + 38,
+	.vdisplay = 240,
+	.vsync_start = 240 + 4,
+	.vsync_end = 240 + 4 + 3,
+	.vtotal = 240 + 4 + 3 + 15,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc lemaker_bl035_rgb_002 = {
+	.modes = &lemaker_bl035_rgb_002_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 70,
+		.height = 52,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_LOW,
+};
+
 static const struct drm_display_mode lg_lb070wv8_mode = {
 	.clock = 33246,
 	.hdisplay = 800,
@@ -2008,6 +2032,30 @@ static const struct panel_desc ortustech_com43h4m85ulc = {
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE,
 };
 
+static const struct drm_display_mode pda_91_00156_a0_mode = {
+	.clock = 33300,
+	.hdisplay = 800,
+	.hsync_start = 800 + 1,
+	.hsync_end = 800 + 1 + 64,
+	.htotal = 800 + 1 + 64 + 64,
+	.vdisplay = 480,
+	.vsync_start = 480 + 1,
+	.vsync_end = 480 + 1 + 23,
+	.vtotal = 480 + 1 + 23 + 22,
+	.vrefresh = 60,
+};
+
+static const struct panel_desc pda_91_00156_a0  = {
+	.modes = &pda_91_00156_a0_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+};
+
+
 static const struct drm_display_mode qd43003c0_40_mode = {
 	.clock = 9000,
 	.hdisplay = 480,
@@ -2638,6 +2686,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "kyo,tcg121xglp",
 		.data = &kyo_tcg121xglp,
 	}, {
+		.compatible = "lemaker,bl035-rgb-002",
+		.data = &lemaker_bl035_rgb_002,
+	}, {
 		.compatible = "lg,lb070wv8",
 		.data = &lg_lb070wv8,
 	}, {
@@ -2686,6 +2737,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "ortustech,com43h4m85ulc",
 		.data = &ortustech_com43h4m85ulc,
 	}, {
+		.compatible = "pda,91-00156-a0",
+		.data = &pda_91_00156_a0,
+	}, {
 		.compatible = "qiaodian,qd43003c0-40",
 		.data = &qd43003c0_40,
 	}, {
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
new file mode 100644
index 000000000000..63f9a1c7fb1b
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019, Amarula Solutions.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+/* Command2 BKx selection command */
+#define DSI_CMD2BKX_SEL			0xFF
+
+/* Command2, BK0 commands */
+#define DSI_CMD2_BK0_PVGAMCTRL		0xB0 /* Positive Voltage Gamma Control */
+#define DSI_CMD2_BK0_NVGAMCTRL		0xB1 /* Negative Voltage Gamma Control */
+#define DSI_CMD2_BK0_LNESET		0xC0 /* Display Line setting */
+#define DSI_CMD2_BK0_PORCTRL		0xC1 /* Porch control */
+#define DSI_CMD2_BK0_INVSEL		0xC2 /* Inversion selection, Frame Rate Control */
+
+/* Command2, BK1 commands */
+#define DSI_CMD2_BK1_VRHS		0xB0 /* Vop amplitude setting */
+#define DSI_CMD2_BK1_VCOM		0xB1 /* VCOM amplitude setting */
+#define DSI_CMD2_BK1_VGHSS		0xB2 /* VGH Voltage setting */
+#define DSI_CMD2_BK1_TESTCMD		0xB3 /* TEST Command Setting */
+#define DSI_CMD2_BK1_VGLS		0xB5 /* VGL Voltage setting */
+#define DSI_CMD2_BK1_PWCTLR1		0xB7 /* Power Control 1 */
+#define DSI_CMD2_BK1_PWCTLR2		0xB8 /* Power Control 2 */
+#define DSI_CMD2_BK1_SPD1		0xC1 /* Source pre_drive timing set1 */
+#define DSI_CMD2_BK1_SPD2		0xC2 /* Source EQ2 Setting */
+#define DSI_CMD2_BK1_MIPISET1		0xD0 /* MIPI Setting 1 */
+
+/**
+ * Command2 with BK function selection.
+ *
+ * BIT[4, 0]: [CN2, BKXSEL]
+ * 10 = CMD2BK0, Command2 BK0
+ * 11 = CMD2BK1, Command2 BK1
+ * 00 = Command2 disable
+ */
+#define DSI_CMD2BK1_SEL			0x11
+#define DSI_CMD2BK0_SEL			0x10
+#define DSI_CMD2BKX_SEL_NONE		0x00
+
+/* Command2, BK0 bytes */
+#define DSI_LINESET_LINE		0x69
+#define DSI_LINESET_LDE_EN		BIT(7)
+#define DSI_LINESET_LINEDELTA		GENMASK(1, 0)
+#define DSI_CMD2_BK0_LNESET_B1		DSI_LINESET_LINEDELTA
+#define DSI_CMD2_BK0_LNESET_B0		(DSI_LINESET_LDE_EN | DSI_LINESET_LINE)
+#define DSI_INVSEL_DEFAULT		GENMASK(5, 4)
+#define DSI_INVSEL_NLINV		GENMASK(2, 0)
+#define DSI_INVSEL_RTNI			GENMASK(2, 1)
+#define DSI_CMD2_BK0_INVSEL_B1		DSI_INVSEL_RTNI
+#define DSI_CMD2_BK0_INVSEL_B0		(DSI_INVSEL_DEFAULT | DSI_INVSEL_NLINV)
+#define DSI_CMD2_BK0_PORCTRL_B0(m)	((m)->vtotal - (m)->vsync_end)
+#define DSI_CMD2_BK0_PORCTRL_B1(m)	((m)->vsync_start - (m)->vdisplay)
+
+/* Command2, BK1 bytes */
+#define DSI_CMD2_BK1_VRHA_SET		0x45
+#define DSI_CMD2_BK1_VCOM_SET		0x13
+#define DSI_CMD2_BK1_VGHSS_SET		GENMASK(2, 0)
+#define DSI_CMD2_BK1_TESTCMD_VAL	BIT(7)
+#define DSI_VGLS_DEFAULT		BIT(6)
+#define DSI_VGLS_SEL			GENMASK(2, 0)
+#define DSI_CMD2_BK1_VGLS_SET		(DSI_VGLS_DEFAULT | DSI_VGLS_SEL)
+#define DSI_PWCTLR1_AP			BIT(7) /* Gamma OP bias, max */
+#define DSI_PWCTLR1_APIS		BIT(2) /* Source OP input bias, min */
+#define DSI_PWCTLR1_APOS		BIT(0) /* Source OP output bias, min */
+#define DSI_CMD2_BK1_PWCTLR1_SET	(DSI_PWCTLR1_AP | DSI_PWCTLR1_APIS | \
+					DSI_PWCTLR1_APOS)
+#define DSI_PWCTLR2_AVDD		BIT(5) /* AVDD 6.6v */
+#define DSI_PWCTLR2_AVCL		0x0    /* AVCL -4.4v */
+#define DSI_CMD2_BK1_PWCTLR2_SET	(DSI_PWCTLR2_AVDD | DSI_PWCTLR2_AVCL)
+#define DSI_SPD1_T2D			BIT(3)
+#define DSI_CMD2_BK1_SPD1_SET		(GENMASK(6, 4) | DSI_SPD1_T2D)
+#define DSI_CMD2_BK1_SPD2_SET		DSI_CMD2_BK1_SPD1_SET
+#define DSI_MIPISET1_EOT_EN		BIT(3)
+#define DSI_CMD2_BK1_MIPISET1_SET	(BIT(7) | DSI_MIPISET1_EOT_EN)
+
+struct st7701_panel_desc {
+	const struct drm_display_mode *mode;
+	unsigned int lanes;
+	unsigned long flags;
+	enum mipi_dsi_pixel_format format;
+	const char *const *supply_names;
+	unsigned int num_supplies;
+	unsigned int panel_sleep_delay;
+};
+
+struct st7701 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	const struct st7701_panel_desc *desc;
+
+	struct backlight_device *backlight;
+	struct regulator_bulk_data *supplies;
+	struct gpio_desc *reset;
+	unsigned int sleep_delay;
+};
+
+static inline struct st7701 *panel_to_st7701(struct drm_panel *panel)
+{
+	return container_of(panel, struct st7701, panel);
+}
+
+static inline int st7701_dsi_write(struct st7701 *st7701, const void *seq,
+				   size_t len)
+{
+	return mipi_dsi_dcs_write_buffer(st7701->dsi, seq, len);
+}
+
+#define ST7701_DSI(st7701, seq...)				\
+	{							\
+		const u8 d[] = { seq };				\
+		st7701_dsi_write(st7701, d, ARRAY_SIZE(d));	\
+	}
+
+static void st7701_init_sequence(struct st7701 *st7701)
+{
+	const struct drm_display_mode *mode = st7701->desc->mode;
+
+	ST7701_DSI(st7701, MIPI_DCS_SOFT_RESET, 0x00);
+
+	/* We need to wait 5ms before sending new commands */
+	msleep(5);
+
+	ST7701_DSI(st7701, MIPI_DCS_EXIT_SLEEP_MODE, 0x00);
+
+	msleep(st7701->sleep_delay);
+
+	/* Command2, BK0 */
+	ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
+		   0x77, 0x01, 0x00, 0x00, DSI_CMD2BK0_SEL);
+	ST7701_DSI(st7701, DSI_CMD2_BK0_PVGAMCTRL, 0x00, 0x0E, 0x15, 0x0F,
+		   0x11, 0x08, 0x08, 0x08, 0x08, 0x23, 0x04, 0x13, 0x12,
+		   0x2B, 0x34, 0x1F);
+	ST7701_DSI(st7701, DSI_CMD2_BK0_NVGAMCTRL, 0x00, 0x0E, 0x95, 0x0F,
+		   0x13, 0x07, 0x09, 0x08, 0x08, 0x22, 0x04, 0x10, 0x0E,
+		   0x2C, 0x34, 0x1F);
+	ST7701_DSI(st7701, DSI_CMD2_BK0_LNESET,
+		   DSI_CMD2_BK0_LNESET_B0, DSI_CMD2_BK0_LNESET_B1);
+	ST7701_DSI(st7701, DSI_CMD2_BK0_PORCTRL,
+		   DSI_CMD2_BK0_PORCTRL_B0(mode),
+		   DSI_CMD2_BK0_PORCTRL_B1(mode));
+	ST7701_DSI(st7701, DSI_CMD2_BK0_INVSEL,
+		   DSI_CMD2_BK0_INVSEL_B0, DSI_CMD2_BK0_INVSEL_B1);
+
+	/* Command2, BK1 */
+	ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
+			0x77, 0x01, 0x00, 0x00, DSI_CMD2BK1_SEL);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_VRHS, DSI_CMD2_BK1_VRHA_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_VCOM, DSI_CMD2_BK1_VCOM_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_VGHSS, DSI_CMD2_BK1_VGHSS_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_TESTCMD, DSI_CMD2_BK1_TESTCMD_VAL);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_VGLS, DSI_CMD2_BK1_VGLS_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR1, DSI_CMD2_BK1_PWCTLR1_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_PWCTLR2, DSI_CMD2_BK1_PWCTLR2_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_SPD1, DSI_CMD2_BK1_SPD1_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_SPD2, DSI_CMD2_BK1_SPD2_SET);
+	ST7701_DSI(st7701, DSI_CMD2_BK1_MIPISET1, DSI_CMD2_BK1_MIPISET1_SET);
+
+	/**
+	 * ST7701_SPEC_V1.2 is unable to provide enough information above this
+	 * specific command sequence, so grab the same from vendor BSP driver.
+	 */
+	ST7701_DSI(st7701, 0xE0, 0x00, 0x00, 0x02);
+	ST7701_DSI(st7701, 0xE1, 0x0B, 0x00, 0x0D, 0x00, 0x0C, 0x00, 0x0E,
+		   0x00, 0x00, 0x44, 0x44);
+	ST7701_DSI(st7701, 0xE2, 0x33, 0x33, 0x44, 0x44, 0x64, 0x00, 0x66,
+		   0x00, 0x65, 0x00, 0x67, 0x00, 0x00);
+	ST7701_DSI(st7701, 0xE3, 0x00, 0x00, 0x33, 0x33);
+	ST7701_DSI(st7701, 0xE4, 0x44, 0x44);
+	ST7701_DSI(st7701, 0xE5, 0x0C, 0x78, 0x3C, 0xA0, 0x0E, 0x78, 0x3C,
+		   0xA0, 0x10, 0x78, 0x3C, 0xA0, 0x12, 0x78, 0x3C, 0xA0);
+	ST7701_DSI(st7701, 0xE6, 0x00, 0x00, 0x33, 0x33);
+	ST7701_DSI(st7701, 0xE7, 0x44, 0x44);
+	ST7701_DSI(st7701, 0xE8, 0x0D, 0x78, 0x3C, 0xA0, 0x0F, 0x78, 0x3C,
+		   0xA0, 0x11, 0x78, 0x3C, 0xA0, 0x13, 0x78, 0x3C, 0xA0);
+	ST7701_DSI(st7701, 0xEB, 0x02, 0x02, 0x39, 0x39, 0xEE, 0x44, 0x00);
+	ST7701_DSI(st7701, 0xEC, 0x00, 0x00);
+	ST7701_DSI(st7701, 0xED, 0xFF, 0xF1, 0x04, 0x56, 0x72, 0x3F, 0xFF,
+		   0xFF, 0xFF, 0xFF, 0xF3, 0x27, 0x65, 0x40, 0x1F, 0xFF);
+
+	/* disable Command2 */
+	ST7701_DSI(st7701, DSI_CMD2BKX_SEL,
+		   0x77, 0x01, 0x00, 0x00, DSI_CMD2BKX_SEL_NONE);
+}
+
+static int st7701_prepare(struct drm_panel *panel)
+{
+	struct st7701 *st7701 = panel_to_st7701(panel);
+	int ret;
+
+	gpiod_set_value(st7701->reset, 0);
+
+	ret = regulator_bulk_enable(st7701->desc->num_supplies,
+				    st7701->supplies);
+	if (ret < 0)
+		return ret;
+	msleep(20);
+
+	gpiod_set_value(st7701->reset, 1);
+	msleep(150);
+
+	st7701_init_sequence(st7701);
+
+	return 0;
+}
+
+static int st7701_enable(struct drm_panel *panel)
+{
+	struct st7701 *st7701 = panel_to_st7701(panel);
+
+	ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_ON, 0x00);
+	backlight_enable(st7701->backlight);
+
+	return 0;
+}
+
+static int st7701_disable(struct drm_panel *panel)
+{
+	struct st7701 *st7701 = panel_to_st7701(panel);
+
+	backlight_disable(st7701->backlight);
+	ST7701_DSI(st7701, MIPI_DCS_SET_DISPLAY_OFF, 0x00);
+
+	return 0;
+}
+
+static int st7701_unprepare(struct drm_panel *panel)
+{
+	struct st7701 *st7701 = panel_to_st7701(panel);
+
+	ST7701_DSI(st7701, MIPI_DCS_ENTER_SLEEP_MODE, 0x00);
+
+	msleep(st7701->sleep_delay);
+
+	gpiod_set_value(st7701->reset, 0);
+
+	/**
+	 * During the Resetting period, the display will be blanked
+	 * (The display is entering blanking sequence, which maximum
+	 * time is 120 ms, when Reset Starts in Sleep Out –mode. The
+	 * display remains the blank state in Sleep In –mode.) and
+	 * then return to Default condition for Hardware Reset.
+	 *
+	 * So we need wait sleep_delay time to make sure reset completed.
+	 */
+	msleep(st7701->sleep_delay);
+
+	regulator_bulk_disable(st7701->desc->num_supplies, st7701->supplies);
+
+	return 0;
+}
+
+static int st7701_get_modes(struct drm_panel *panel)
+{
+	struct st7701 *st7701 = panel_to_st7701(panel);
+	const struct drm_display_mode *desc_mode = st7701->desc->mode;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, desc_mode);
+	if (!mode) {
+		DRM_DEV_ERROR(&st7701->dsi->dev,
+			      "failed to add mode %ux%ux@%u\n",
+			      desc_mode->hdisplay, desc_mode->vdisplay,
+			      desc_mode->vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = desc_mode->width_mm;
+	panel->connector->display_info.height_mm = desc_mode->height_mm;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs st7701_funcs = {
+	.disable	= st7701_disable,
+	.unprepare	= st7701_unprepare,
+	.prepare	= st7701_prepare,
+	.enable		= st7701_enable,
+	.get_modes	= st7701_get_modes,
+};
+
+static const struct drm_display_mode ts8550b_mode = {
+	.clock		= 27500,
+
+	.hdisplay	= 480,
+	.hsync_start	= 480 + 38,
+	.hsync_end	= 480 + 38 + 12,
+	.htotal		= 480 + 38 + 12 + 12,
+
+	.vdisplay	= 854,
+	.vsync_start	= 854 + 4,
+	.vsync_end	= 854 + 4 + 8,
+	.vtotal		= 854 + 4 + 8 + 18,
+
+	.width_mm	= 69,
+	.height_mm	= 139,
+
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const char * const ts8550b_supply_names[] = {
+	"VCC",
+	"IOVCC",
+};
+
+static const struct st7701_panel_desc ts8550b_desc = {
+	.mode = &ts8550b_mode,
+	.lanes = 2,
+	.flags = MIPI_DSI_MODE_VIDEO,
+	.format = MIPI_DSI_FMT_RGB888,
+	.supply_names = ts8550b_supply_names,
+	.num_supplies = ARRAY_SIZE(ts8550b_supply_names),
+	.panel_sleep_delay = 80, /* panel need extra 80ms for sleep out cmd */
+};
+
+static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
+{
+	const struct st7701_panel_desc *desc;
+	struct st7701 *st7701;
+	int ret, i;
+
+	st7701 = devm_kzalloc(&dsi->dev, sizeof(*st7701), GFP_KERNEL);
+	if (!st7701)
+		return -ENOMEM;
+
+	desc = of_device_get_match_data(&dsi->dev);
+	dsi->mode_flags = desc->flags;
+	dsi->format = desc->format;
+	dsi->lanes = desc->lanes;
+
+	st7701->supplies = devm_kcalloc(&dsi->dev, desc->num_supplies,
+					sizeof(*st7701->supplies),
+					GFP_KERNEL);
+	if (!st7701->supplies)
+		return -ENOMEM;
+
+	for (i = 0; i < desc->num_supplies; i++)
+		st7701->supplies[i].supply = desc->supply_names[i];
+
+	ret = devm_regulator_bulk_get(&dsi->dev, desc->num_supplies,
+				      st7701->supplies);
+	if (ret < 0)
+		return ret;
+
+	st7701->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(st7701->reset)) {
+		DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+		return PTR_ERR(st7701->reset);
+	}
+
+	st7701->backlight = devm_of_find_backlight(&dsi->dev);
+	if (IS_ERR(st7701->backlight))
+		return PTR_ERR(st7701->backlight);
+
+	drm_panel_init(&st7701->panel);
+
+	/**
+	 * Once sleep out has been issued, ST7701 IC required to wait 120ms
+	 * before initiating new commands.
+	 *
+	 * On top of that some panels might need an extra delay to wait, so
+	 * add panel specific delay for those cases. As now this panel specific
+	 * delay information is referenced from those panel BSP driver, example
+	 * ts8550b and there is no valid documentation for that.
+	 */
+	st7701->sleep_delay = 120 + desc->panel_sleep_delay;
+	st7701->panel.funcs = &st7701_funcs;
+	st7701->panel.dev = &dsi->dev;
+
+	ret = drm_panel_add(&st7701->panel);
+	if (ret < 0)
+		return ret;
+
+	mipi_dsi_set_drvdata(dsi, st7701);
+	st7701->dsi = dsi;
+	st7701->desc = desc;
+
+	return mipi_dsi_attach(dsi);
+}
+
+static int st7701_dsi_remove(struct mipi_dsi_device *dsi)
+{
+	struct st7701 *st7701 = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&st7701->panel);
+
+	return 0;
+}
+
+static const struct of_device_id st7701_of_match[] = {
+	{ .compatible = "techstar,ts8550b", .data = &ts8550b_desc },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st7701_of_match);
+
+static struct mipi_dsi_driver st7701_dsi_driver = {
+	.probe		= st7701_dsi_probe,
+	.remove		= st7701_dsi_remove,
+	.driver = {
+		.name		= "st7701",
+		.of_match_table	= st7701_of_match,
+	},
+};
+module_mipi_dsi_driver(st7701_dsi_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
+MODULE_DESCRIPTION("Sitronix ST7701 LCD Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/panel/panel-tpo-tpg110.c b/drivers/gpu/drm/panel/panel-tpo-tpg110.c
new file mode 100644
index 000000000000..5a9f8f4d5d24
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-tpo-tpg110.c
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Panel driver for the TPO TPG110 400CH LTPS TFT LCD Single Chip
+ * Digital Driver.
+ *
+ * This chip drives a TFT LCD, so it does not know what kind of
+ * display is actually connected to it, so the width and height of that
+ * display needs to be supplied from the machine configuration.
+ *
+ * Author:
+ * Linus Walleij <linus.walleij@linaro.org>
+ */
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#include <linux/backlight.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#define TPG110_TEST			0x00
+#define TPG110_CHIPID			0x01
+#define TPG110_CTRL1			0x02
+#define TPG110_RES_MASK			GENMASK(2, 0)
+#define TPG110_RES_800X480		0x07
+#define TPG110_RES_640X480		0x06
+#define TPG110_RES_480X272		0x05
+#define TPG110_RES_480X640		0x04
+#define TPG110_RES_480X272_D		0x01 /* Dual scan: outputs 800x480 */
+#define TPG110_RES_400X240_D		0x00 /* Dual scan: outputs 800x480 */
+#define TPG110_CTRL2			0x03
+#define TPG110_CTRL2_PM			BIT(0)
+#define TPG110_CTRL2_RES_PM_CTRL	BIT(7)
+
+/**
+ * struct tpg110_panel_mode - lookup struct for the supported modes
+ */
+struct tpg110_panel_mode {
+	/**
+	 * @name: the name of this panel
+	 */
+	const char *name;
+	/**
+	 * @magic: the magic value from the detection register
+	 */
+	u32 magic;
+	/**
+	 * @mode: the DRM display mode for this panel
+	 */
+	struct drm_display_mode mode;
+	/**
+	 * @bus_flags: the DRM bus flags for this panel e.g. inverted clock
+	 */
+	u32 bus_flags;
+};
+
+/**
+ * struct tpg110 - state container for the TPG110 panel
+ */
+struct tpg110 {
+	/**
+	 * @dev: the container device
+	 */
+	struct device *dev;
+	/**
+	 * @spi: the corresponding SPI device
+	 */
+	struct spi_device *spi;
+	/**
+	 * @panel: the DRM panel instance for this device
+	 */
+	struct drm_panel panel;
+	/**
+	 * @backlight: backlight for this panel
+	 */
+	struct backlight_device *backlight;
+	/**
+	 * @panel_type: the panel mode as detected
+	 */
+	const struct tpg110_panel_mode *panel_mode;
+	/**
+	 * @width: the width of this panel in mm
+	 */
+	u32 width;
+	/**
+	 * @height: the height of this panel in mm
+	 */
+	u32 height;
+	/**
+	 * @grestb: reset GPIO line
+	 */
+	struct gpio_desc *grestb;
+};
+
+/*
+ * TPG110 modes, these are the simple modes, the dualscan modes that
+ * take 400x240 or 480x272 in and display as 800x480 are not listed.
+ */
+static const struct tpg110_panel_mode tpg110_modes[] = {
+	{
+		.name = "800x480 RGB",
+		.magic = TPG110_RES_800X480,
+		.mode = {
+			.clock = 33200,
+			.hdisplay = 800,
+			.hsync_start = 800 + 40,
+			.hsync_end = 800 + 40 + 1,
+			.htotal = 800 + 40 + 1 + 216,
+			.vdisplay = 480,
+			.vsync_start = 480 + 10,
+			.vsync_end = 480 + 10 + 1,
+			.vtotal = 480 + 10 + 1 + 35,
+			.vrefresh = 60,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	},
+	{
+		.name = "640x480 RGB",
+		.magic = TPG110_RES_640X480,
+		.mode = {
+			.clock = 25200,
+			.hdisplay = 640,
+			.hsync_start = 640 + 24,
+			.hsync_end = 640 + 24 + 1,
+			.htotal = 640 + 24 + 1 + 136,
+			.vdisplay = 480,
+			.vsync_start = 480 + 18,
+			.vsync_end = 480 + 18 + 1,
+			.vtotal = 480 + 18 + 1 + 27,
+			.vrefresh = 60,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	},
+	{
+		.name = "480x272 RGB",
+		.magic = TPG110_RES_480X272,
+		.mode = {
+			.clock = 9000,
+			.hdisplay = 480,
+			.hsync_start = 480 + 2,
+			.hsync_end = 480 + 2 + 1,
+			.htotal = 480 + 2 + 1 + 43,
+			.vdisplay = 272,
+			.vsync_start = 272 + 2,
+			.vsync_end = 272 + 2 + 1,
+			.vtotal = 272 + 2 + 1 + 12,
+			.vrefresh = 60,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	},
+	{
+		.name = "480x640 RGB",
+		.magic = TPG110_RES_480X640,
+		.mode = {
+			.clock = 20500,
+			.hdisplay = 480,
+			.hsync_start = 480 + 2,
+			.hsync_end = 480 + 2 + 1,
+			.htotal = 480 + 2 + 1 + 43,
+			.vdisplay = 640,
+			.vsync_start = 640 + 4,
+			.vsync_end = 640 + 4 + 1,
+			.vtotal = 640 + 4 + 1 + 8,
+			.vrefresh = 60,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	},
+	{
+		.name = "400x240 RGB",
+		.magic = TPG110_RES_400X240_D,
+		.mode = {
+			.clock = 8300,
+			.hdisplay = 400,
+			.hsync_start = 400 + 20,
+			.hsync_end = 400 + 20 + 1,
+			.htotal = 400 + 20 + 1 + 108,
+			.vdisplay = 240,
+			.vsync_start = 240 + 2,
+			.vsync_end = 240 + 2 + 1,
+			.vtotal = 240 + 2 + 1 + 20,
+			.vrefresh = 60,
+		},
+		.bus_flags = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	},
+};
+
+static inline struct tpg110 *
+to_tpg110(struct drm_panel *panel)
+{
+	return container_of(panel, struct tpg110, panel);
+}
+
+static u8 tpg110_readwrite_reg(struct tpg110 *tpg, bool write,
+			       u8 address, u8 outval)
+{
+	struct spi_message m;
+	struct spi_transfer t[2];
+	u8 buf[2];
+	int ret;
+
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	if (write) {
+		/*
+		 * Clear address bit 0, 1 when writing, just to be sure
+		 * The actual bit indicating a write here is bit 1, bit
+		 * 0 is just surplus to pad it up to 8 bits.
+		 */
+		buf[0] = address << 2;
+		buf[0] &= ~0x03;
+		buf[1] = outval;
+
+		t[0].bits_per_word = 8;
+		t[0].tx_buf = &buf[0];
+		t[0].len = 1;
+
+		t[1].tx_buf = &buf[1];
+		t[1].len = 1;
+		t[1].bits_per_word = 8;
+	} else {
+		/* Set address bit 0 to 1 to read */
+		buf[0] = address << 1;
+		buf[0] |= 0x01;
+
+		/*
+		 * The last bit/clock is Hi-Z turnaround cycle, so we need
+		 * to send only 7 bits here. The 8th bit is the high impedance
+		 * turn-around cycle.
+		 */
+		t[0].bits_per_word = 7;
+		t[0].tx_buf = &buf[0];
+		t[0].len = 1;
+
+		t[1].rx_buf = &buf[1];
+		t[1].len = 1;
+		t[1].bits_per_word = 8;
+	}
+
+	spi_message_add_tail(&t[0], &m);
+	spi_message_add_tail(&t[1], &m);
+	ret = spi_sync(tpg->spi, &m);
+	if (ret) {
+		DRM_DEV_ERROR(tpg->dev, "SPI message error %d\n", ret);
+		return ret;
+	}
+	if (write)
+		return 0;
+	/* Read */
+	return buf[1];
+}
+
+static u8 tpg110_read_reg(struct tpg110 *tpg, u8 address)
+{
+	return tpg110_readwrite_reg(tpg, false, address, 0);
+}
+
+static void tpg110_write_reg(struct tpg110 *tpg, u8 address, u8 outval)
+{
+	tpg110_readwrite_reg(tpg, true, address, outval);
+}
+
+static int tpg110_startup(struct tpg110 *tpg)
+{
+	u8 val;
+	int i;
+
+	/* De-assert the reset signal */
+	gpiod_set_value_cansleep(tpg->grestb, 0);
+	usleep_range(1000, 2000);
+	DRM_DEV_DEBUG(tpg->dev, "de-asserted GRESTB\n");
+
+	/* Test display communication */
+	tpg110_write_reg(tpg, TPG110_TEST, 0x55);
+	val = tpg110_read_reg(tpg, TPG110_TEST);
+	if (val != 0x55) {
+		DRM_DEV_ERROR(tpg->dev, "failed communication test\n");
+		return -ENODEV;
+	}
+
+	val = tpg110_read_reg(tpg, TPG110_CHIPID);
+	DRM_DEV_INFO(tpg->dev, "TPG110 chip ID: %d version: %d\n",
+		 val >> 4, val & 0x0f);
+
+	/* Show display resolution */
+	val = tpg110_read_reg(tpg, TPG110_CTRL1);
+	val &= TPG110_RES_MASK;
+	switch (val) {
+	case TPG110_RES_400X240_D:
+		DRM_DEV_INFO(tpg->dev,
+			 "IN 400x240 RGB -> OUT 800x480 RGB (dual scan)\n");
+		break;
+	case TPG110_RES_480X272_D:
+		DRM_DEV_INFO(tpg->dev,
+			 "IN 480x272 RGB -> OUT 800x480 RGB (dual scan)\n");
+		break;
+	case TPG110_RES_480X640:
+		DRM_DEV_INFO(tpg->dev, "480x640 RGB\n");
+		break;
+	case TPG110_RES_480X272:
+		DRM_DEV_INFO(tpg->dev, "480x272 RGB\n");
+		break;
+	case TPG110_RES_640X480:
+		DRM_DEV_INFO(tpg->dev, "640x480 RGB\n");
+		break;
+	case TPG110_RES_800X480:
+		DRM_DEV_INFO(tpg->dev, "800x480 RGB\n");
+		break;
+	default:
+		DRM_DEV_ERROR(tpg->dev, "ILLEGAL RESOLUTION 0x%02x\n", val);
+		break;
+	}
+
+	/* From the producer side, this is the same resolution */
+	if (val == TPG110_RES_480X272_D)
+		val = TPG110_RES_480X272;
+
+	for (i = 0; i < ARRAY_SIZE(tpg110_modes); i++) {
+		const struct tpg110_panel_mode *pm;
+
+		pm = &tpg110_modes[i];
+		if (pm->magic == val) {
+			tpg->panel_mode = pm;
+			break;
+		}
+	}
+	if (i == ARRAY_SIZE(tpg110_modes)) {
+		DRM_DEV_ERROR(tpg->dev, "unsupported mode (%02x) detected\n",
+			val);
+		return -ENODEV;
+	}
+
+	val = tpg110_read_reg(tpg, TPG110_CTRL2);
+	DRM_DEV_INFO(tpg->dev, "resolution and standby is controlled by %s\n",
+		 (val & TPG110_CTRL2_RES_PM_CTRL) ? "software" : "hardware");
+	/* Take control over resolution and standby */
+	val |= TPG110_CTRL2_RES_PM_CTRL;
+	tpg110_write_reg(tpg, TPG110_CTRL2, val);
+
+	return 0;
+}
+
+static int tpg110_disable(struct drm_panel *panel)
+{
+	struct tpg110 *tpg = to_tpg110(panel);
+	u8 val;
+
+	/* Put chip into standby */
+	val = tpg110_read_reg(tpg, TPG110_CTRL2_PM);
+	val &= ~TPG110_CTRL2_PM;
+	tpg110_write_reg(tpg, TPG110_CTRL2_PM, val);
+
+	backlight_disable(tpg->backlight);
+
+	return 0;
+}
+
+static int tpg110_enable(struct drm_panel *panel)
+{
+	struct tpg110 *tpg = to_tpg110(panel);
+	u8 val;
+
+	backlight_enable(tpg->backlight);
+
+	/* Take chip out of standby */
+	val = tpg110_read_reg(tpg, TPG110_CTRL2_PM);
+	val |= TPG110_CTRL2_PM;
+	tpg110_write_reg(tpg, TPG110_CTRL2_PM, val);
+
+	return 0;
+}
+
+/**
+ * tpg110_get_modes() - return the appropriate mode
+ * @panel: the panel to get the mode for
+ *
+ * This currently does not present a forest of modes, instead it
+ * presents the mode that is configured for the system under use,
+ * and which is detected by reading the registers of the display.
+ */
+static int tpg110_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct tpg110 *tpg = to_tpg110(panel);
+	struct drm_display_mode *mode;
+
+	strncpy(connector->display_info.name, tpg->panel_mode->name,
+		DRM_DISPLAY_INFO_LEN);
+	connector->display_info.width_mm = tpg->width;
+	connector->display_info.height_mm = tpg->height;
+	connector->display_info.bus_flags = tpg->panel_mode->bus_flags;
+
+	mode = drm_mode_duplicate(panel->drm, &tpg->panel_mode->mode);
+	drm_mode_set_name(mode);
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+	mode->width_mm = tpg->width;
+	mode->height_mm = tpg->height;
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs tpg110_drm_funcs = {
+	.disable = tpg110_disable,
+	.enable = tpg110_enable,
+	.get_modes = tpg110_get_modes,
+};
+
+static int tpg110_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct device_node *np = dev->of_node;
+	struct tpg110 *tpg;
+	int ret;
+
+	tpg = devm_kzalloc(dev, sizeof(*tpg), GFP_KERNEL);
+	if (!tpg)
+		return -ENOMEM;
+	tpg->dev = dev;
+
+	/* We get the physical display dimensions from the DT */
+	ret = of_property_read_u32(np, "width-mm", &tpg->width);
+	if (ret)
+		DRM_DEV_ERROR(dev, "no panel width specified\n");
+	ret = of_property_read_u32(np, "height-mm", &tpg->height);
+	if (ret)
+		DRM_DEV_ERROR(dev, "no panel height specified\n");
+
+	/* Look for some optional backlight */
+	tpg->backlight = devm_of_find_backlight(dev);
+	if (IS_ERR(tpg->backlight))
+		return PTR_ERR(tpg->backlight);
+
+	/* This asserts the GRESTB signal, putting the display into reset */
+	tpg->grestb = devm_gpiod_get(dev, "grestb", GPIOD_OUT_HIGH);
+	if (IS_ERR(tpg->grestb)) {
+		DRM_DEV_ERROR(dev, "no GRESTB GPIO\n");
+		return -ENODEV;
+	}
+
+	spi->bits_per_word = 8;
+	spi->mode |= SPI_3WIRE_HIZ;
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "spi setup failed.\n");
+		return ret;
+	}
+	tpg->spi = spi;
+
+	ret = tpg110_startup(tpg);
+	if (ret)
+		return ret;
+
+	drm_panel_init(&tpg->panel);
+	tpg->panel.dev = dev;
+	tpg->panel.funcs = &tpg110_drm_funcs;
+	spi_set_drvdata(spi, tpg);
+
+	return drm_panel_add(&tpg->panel);
+}
+
+static int tpg110_remove(struct spi_device *spi)
+{
+	struct tpg110 *tpg = spi_get_drvdata(spi);
+
+	drm_panel_remove(&tpg->panel);
+	return 0;
+}
+
+static const struct of_device_id tpg110_match[] = {
+	{ .compatible = "tpo,tpg110", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tpg110_match);
+
+static struct spi_driver tpg110_driver = {
+	.probe		= tpg110_probe,
+	.remove		= tpg110_remove,
+	.driver		= {
+		.name	= "tpo-tpg110-panel",
+		.of_match_table = tpg110_match,
+	},
+};
+module_spi_driver(tpg110_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("TPO TPG110 panel driver");
+MODULE_LICENSE("GPL v2");