Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for drm for 4.10 kernel.

  New drivers:
   - ZTE VOU display driver (zxdrm)
   - Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson)
   - MXSFB support (mxsfb)

  Core:
   - Format handling has been reworked
   - Better atomic state debugging
   - drm_mm leak debugging
   - Atomic explicit fencing support
   - fbdev helper ops
   - Documentation updates
   - MST fbcon fixes

  Bridge:
   - Silicon Image SiI8620 driver

  Panel:
   - Add support for new simple panels

  i915:
   - GVT Device model
   - Better HDMI2.0 support on skylake
   - More watermark fixes
   - GPU idling rework for suspend/resume
   - DP Audio workarounds
   - Scheduler prep-work
   - Opregion CADL handling
   - GPU scheduler and priority boosting

  amdgfx/radeon:
   - Support for virtual devices
   - New VM manager for non-contig VRAM buffers
   - UVD powergating
   - SI register header cleanup
   - Cursor fixes
   - Powermanagement fixes

  nouveau:
   - Powermangement reworks for better voltage/clock changes
   - Atomic modesetting support
   - Displayport Multistream (MST) support.
   - GP102/104 hang and cursor fixes
   - GP106 support

  hisilicon:
   - hibmc support (BMC chip for aarch64 servers)

  armada:
   - add tracing support for overlay change
   - refactor plane support
   - de-midlayer the driver

  omapdrm:
   - Timing code cleanups

  rcar-du:
   - R8A7792/R8A7796 support
   - Misc fixes.

  sunxi:
   - A31 SoC display engine support

  imx-drm:
   - YUV format support
   - Cleanup plane atomic update

  mali-dp:
   - Misc fixes

  dw-hdmi:
   - Add support for HDMI i2c master controller

  tegra:
   - IOMMU support fixes
   - Error handling fixes

  tda998x:
   - Fix connector registration
   - Improved robustness
   - Fix infoframe/audio compliance

  virtio:
   - fix busid issues
   - allocate more vbufs

  qxl:
   - misc fixes and cleanups.

  vc4:
   - Fragment shader threading
   - ETC1 support
   - VEC (tv-out) support

  msm:
   - A5XX GPU support
   - Lots of atomic changes

  tilcdc:
   - Misc fixes and cleanups.

  etnaviv:
   - Fix dma-buf export path
   - DRAW_INSTANCED support
   - fix driver on i.MX6SX

  exynos:
   - HDMI refactoring

  fsl-dcu:
   - fbdev changes"

* tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits)
  drm/nouveau/kms/nv50: fix atomic regression on original G80
  drm/nouveau/bl: Do not register interface if Apple GMUX detected
  drm/nouveau/bl: Assign different names to interfaces
  drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
  drm/nouveau/ltc: protect clearing of comptags with mutex
  drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
  drm/nouveau/core: recognise GP106 chipset
  drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
  drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
  drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
  drm/nouveau/fifo/gf100-: recover from host mmu faults
  drm: Add fake controlD* symlinks for backwards compat
  drm/vc4: Don't use drm_put_dev
  drm/vc4: Document VEC DT binding
  drm/vc4: Add support for the VEC (Video Encoder) IP
  drm: Add TV connector states to drm_connector_state
  drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum
  drm/vc4: Fix ->clock_select setting for the VEC encoder
  drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
  drm/amdgpu: use pin rather than pin_restricted in a few cases
  ...

1 files changed, 29 insertions, 28 deletions

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
index e859b3f893f7..f313dbfcbacb 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -37,28 +37,29 @@ struct panel_drv_data {
 
 	int data_lines;
 
-	struct omap_video_timings videomode;
+	struct videomode vm;
 
 	struct spi_device *spi_dev;
 };
 
-static struct omap_video_timings td028ttec1_panel_timings = {
-	.x_res		= 480,
-	.y_res		= 640,
+static struct videomode td028ttec1_panel_vm = {
+	.hactive	= 480,
+	.vactive	= 640,
 	.pixelclock	= 22153000,
-	.hfp		= 24,
-	.hsw		= 8,
-	.hbp		= 8,
-	.vfp		= 4,
-	.vsw		= 2,
-	.vbp		= 2,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.hfront_porch	= 24,
+	.hsync_len	= 8,
+	.hback_porch	= 8,
+	.vfront_porch	= 4,
+	.vsync_len	= 2,
+	.vback_porch	= 2,
+
+	.flags		= DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+			  DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_SYNC_POSEDGE |
+			  DISPLAY_FLAGS_PIXDATA_NEGEDGE,
+	/*
+	 * Note: According to the panel documentation:
+	 * SYNC needs to be driven on the FALLING edge
+	 */
 };
 
 #define JBT_COMMAND	0x000
@@ -208,7 +209,7 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
 
 	if (ddata->data_lines)
 		in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
+	in->ops.dpi->set_timings(in, &ddata->vm);
 
 	r = in->ops.dpi->enable(in);
 	if (r)
@@ -325,32 +326,32 @@ static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
 }
 
 static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
+					 struct videomode *vm)
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
 
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
+	ddata->vm = *vm;
+	dssdev->panel.vm = *vm;
 
-	in->ops.dpi->set_timings(in, timings);
+	in->ops.dpi->set_timings(in, vm);
 }
 
 static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
+					 struct videomode *vm)
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 
-	*timings = ddata->videomode;
+	*vm = ddata->vm;
 }
 
 static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
+					  struct videomode *vm)
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
 	struct omap_dss_device *in = ddata->in;
 
-	return in->ops.dpi->check_timings(in, timings);
+	return in->ops.dpi->check_timings(in, vm);
 }
 
 static struct omap_dss_driver td028ttec1_ops = {
@@ -414,14 +415,14 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
 	if (r)
 		return r;
 
-	ddata->videomode = td028ttec1_panel_timings;
+	ddata->vm = td028ttec1_panel_vm;
 
 	dssdev = &ddata->dssdev;
 	dssdev->dev = &spi->dev;
 	dssdev->driver = &td028ttec1_ops;
 	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
 	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
+	dssdev->panel.vm = ddata->vm;
 	dssdev->phy.dpi.data_lines = ddata->data_lines;
 
 	r = omapdss_register_display(dssdev);