drm/omap: displays: Remove unused panel drivers

drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01,
NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the
omapdrm-specific drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816122228.9475-3-laurent.pinchart@ideasonboard.com

1 files changed, 0 insertions, 390 deletions

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
deleted file mode 100644
index c885018ac6ce..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ /dev/null
@@ -1,390 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Toppoly TD028TTEC1 panel support
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * Neo 1973 code (jbt6k74.c):
- * Copyright (C) 2006-2007 by OpenMoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- *
- * Ported and adapted from Neo 1973 U-Boot by:
- * H. Nikolaus Schaller <hns@goldelico.com>
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-
-	struct videomode vm;
-
-	struct backlight_device *backlight;
-
-	struct spi_device *spi_dev;
-};
-
-static const struct videomode td028ttec1_panel_vm = {
-	.hactive	= 480,
-	.vactive	= 640,
-	.pixelclock	= 22153000,
-	.hfront_porch	= 24,
-	.hsync_len	= 8,
-	.hback_porch	= 8,
-	.vfront_porch	= 4,
-	.vsync_len	= 2,
-	.vback_porch	= 2,
-
-	.flags		= DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
-};
-
-#define JBT_COMMAND	0x000
-#define JBT_DATA	0x100
-
-static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
-{
-	int rc;
-	u16 tx_buf = JBT_COMMAND | reg;
-
-	rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
-			1*sizeof(u16));
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_ret_write_0 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
-{
-	int rc;
-	u16 tx_buf[2];
-
-	tx_buf[0] = JBT_COMMAND | reg;
-	tx_buf[1] = JBT_DATA | data;
-	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
-			2*sizeof(u16));
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_reg_write_1 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
-{
-	int rc;
-	u16 tx_buf[3];
-
-	tx_buf[0] = JBT_COMMAND | reg;
-	tx_buf[1] = JBT_DATA | (data >> 8);
-	tx_buf[2] = JBT_DATA | (data & 0xff);
-
-	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
-			3*sizeof(u16));
-
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_reg_write_2 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-enum jbt_register {
-	JBT_REG_SLEEP_IN		= 0x10,
-	JBT_REG_SLEEP_OUT		= 0x11,
-
-	JBT_REG_DISPLAY_OFF		= 0x28,
-	JBT_REG_DISPLAY_ON		= 0x29,
-
-	JBT_REG_RGB_FORMAT		= 0x3a,
-	JBT_REG_QUAD_RATE		= 0x3b,
-
-	JBT_REG_POWER_ON_OFF		= 0xb0,
-	JBT_REG_BOOSTER_OP		= 0xb1,
-	JBT_REG_BOOSTER_MODE		= 0xb2,
-	JBT_REG_BOOSTER_FREQ		= 0xb3,
-	JBT_REG_OPAMP_SYSCLK		= 0xb4,
-	JBT_REG_VSC_VOLTAGE		= 0xb5,
-	JBT_REG_VCOM_VOLTAGE		= 0xb6,
-	JBT_REG_EXT_DISPL		= 0xb7,
-	JBT_REG_OUTPUT_CONTROL		= 0xb8,
-	JBT_REG_DCCLK_DCEV		= 0xb9,
-	JBT_REG_DISPLAY_MODE1		= 0xba,
-	JBT_REG_DISPLAY_MODE2		= 0xbb,
-	JBT_REG_DISPLAY_MODE		= 0xbc,
-	JBT_REG_ASW_SLEW		= 0xbd,
-	JBT_REG_DUMMY_DISPLAY		= 0xbe,
-	JBT_REG_DRIVE_SYSTEM		= 0xbf,
-
-	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
-	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
-	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
-	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
-	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
-	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
-	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
-
-	JBT_REG_GAMMA1_FINE_1		= 0xc7,
-	JBT_REG_GAMMA1_FINE_2		= 0xc8,
-	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
-	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
-
-	JBT_REG_BLANK_CONTROL		= 0xcf,
-	JBT_REG_BLANK_TH_TV		= 0xd0,
-	JBT_REG_CKV_ON_OFF		= 0xd1,
-	JBT_REG_CKV_1_2			= 0xd2,
-	JBT_REG_OEV_TIMING		= 0xd3,
-	JBT_REG_ASW_TIMING_1		= 0xd4,
-	JBT_REG_ASW_TIMING_2		= 0xd5,
-
-	JBT_REG_HCLOCK_VGA		= 0xec,
-	JBT_REG_HCLOCK_QVGA		= 0xed,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int td028ttec1_panel_connect(struct omap_dss_device *src,
-				    struct omap_dss_device *dst)
-{
-	return 0;
-}
-
-static void td028ttec1_panel_disconnect(struct omap_dss_device *src,
-					struct omap_dss_device *dst)
-{
-}
-
-static void td028ttec1_panel_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	int r = 0;
-
-	dev_dbg(dssdev->dev, "%s: state %d\n", __func__, dssdev->state);
-
-	/* three times command zero */
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-
-	if (r) {
-		dev_warn(dssdev->dev, "%s: transfer error\n", __func__);
-		return;
-	}
-
-	/* deep standby out */
-	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
-
-	/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
-
-	/* Quad mode off */
-	r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
-
-	/* AVDD on, XVDD on */
-	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
-
-	/* Output control */
-	r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
-
-	/* Sleep mode off */
-	r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
-
-	/* at this point we have like 50% grey */
-
-	/* initialize register set */
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
-	r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
-	r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
-	r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
-	/*
-	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
-	 * to avoid red / blue flicker
-	 */
-	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
-
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
-	r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
-
-	r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
-	r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
-	r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
-	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
-
-	r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
-
-	if (r)
-		dev_err(dssdev->dev, "%s: write error\n", __func__);
-
-	backlight_enable(ddata->backlight);
-}
-
-static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	backlight_disable(ddata->backlight);
-
-	dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
-
-	jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
-	jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
-	jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
-	jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
-}
-
-static int td028ttec1_panel_get_modes(struct omap_dss_device *dssdev,
-				      struct drm_connector *connector)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops td028ttec1_ops = {
-	.connect	= td028ttec1_panel_connect,
-	.disconnect	= td028ttec1_panel_disconnect,
-
-	.enable		= td028ttec1_panel_enable,
-	.disable	= td028ttec1_panel_disable,
-
-	.get_modes	= td028ttec1_panel_get_modes,
-};
-
-static int td028ttec1_panel_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	dev_dbg(&spi->dev, "%s\n", __func__);
-
-	spi->bits_per_word = 9;
-	spi->mode = SPI_MODE_3;
-
-	r = spi_setup(spi);
-	if (r < 0) {
-		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
-		return r;
-	}
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	ddata->backlight = devm_of_find_backlight(&spi->dev);
-	if (IS_ERR(ddata->backlight))
-		return PTR_ERR(ddata->backlight);
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi_dev = spi;
-
-	ddata->vm = td028ttec1_panel_vm;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->ops = &td028ttec1_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->display = true;
-	dssdev->owner = THIS_MODULE;
-	dssdev->of_ports = BIT(0);
-	dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
-
-	/*
-	 * Note: According to the panel documentation:
-	 * SYNC needs to be driven on the FALLING edge
-	 */
-	dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
-			  | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
-			  | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
-
-	omapdss_display_init(dssdev);
-	omapdss_device_register(dssdev);
-
-	return 0;
-}
-
-static int td028ttec1_panel_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-
-	dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
-
-	omapdss_device_unregister(dssdev);
-
-	td028ttec1_panel_disable(dssdev);
-
-	return 0;
-}
-
-static const struct of_device_id td028ttec1_of_match[] = {
-	{ .compatible = "omapdss,tpo,td028ttec1", },
-	/* keep to not break older DTB */
-	{ .compatible = "omapdss,toppoly,td028ttec1", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
-
-static const struct spi_device_id td028ttec1_ids[] = {
-	{ "toppoly,td028ttec1", 0 },
-	{ "tpo,td028ttec1", 0},
-	{ /* sentinel */ }
-};
-
-MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
-
-
-static struct spi_driver td028ttec1_spi_driver = {
-	.probe		= td028ttec1_panel_probe,
-	.remove		= td028ttec1_panel_remove,
-	.id_table	= td028ttec1_ids,
-
-	.driver         = {
-		.name   = "panel-tpo-td028ttec1",
-		.of_match_table = td028ttec1_of_match,
-		.suppress_bind_attrs = true,
-	},
-};
-
-module_spi_driver(td028ttec1_spi_driver);
-
-MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
-MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
-MODULE_LICENSE("GPL");