drm/nouveau: Clean up nv50_head_atomic_check_mode() and fix blankus calculation

drm_mode_set_crtcinfo() does compensation for interlace and
doublescan timing effects already, so do it first and use the
compensated figures instead of the constant "vscan / ilace" terms
that we had before.

And then it turns out that the hardware model for how the timing
parameters are configured is basically the standard model, but
starting one clock before the sync pulse rather than at the start
of the display area, which lets us drastically simplify the
overall timing calculations (verifying the changes by algebraic
operations is left as an exercise for the reader).

Finally, there were a couple of issues with the computation of
m->v.blankus that are addressed here.  Interlaced modes would
generate a negative intermediate result.  Double scan modes would
generate an overestimate rather than an underestimate.  And when
enabling frame-packing modes, a rather extreme overestimate would
be generated.  Fixed, by using the timings as adjusted for the
CRTC to find the length of the vertical blanking period instead of
mixing adjusted and pre-adjustment timing parameters.

Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

1 files changed, 23 insertions, 21 deletions

diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index 775c10015dbe..83eee1f00336 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -2036,34 +2036,37 @@ static void
 nv50_head_atomic_check_mode(struct nv50_head *head, struct nv50_head_atom *asyh)
 {
 	struct drm_display_mode *mode = &asyh->state.adjusted_mode;
-	u32 ilace   = (mode->flags & DRM_MODE_FLAG_INTERLACE) ? 2 : 1;
-	u32 vscan   = (mode->flags & DRM_MODE_FLAG_DBLSCAN) ? 2 : 1;
-	u32 hbackp  =  mode->htotal - mode->hsync_end;
-	u32 vbackp  = (mode->vtotal - mode->vsync_end) * vscan / ilace;
-	u32 hfrontp =  mode->hsync_start - mode->hdisplay;
-	u32 vfrontp = (mode->vsync_start - mode->vdisplay) * vscan / ilace;
-	u32 blankus;
 	struct nv50_head_mode *m = &asyh->mode;
+	u32 blankus;
 
-	m->h.active = mode->htotal;
-	m->h.synce  = mode->hsync_end - mode->hsync_start - 1;
-	m->h.blanke = m->h.synce + hbackp;
-	m->h.blanks = mode->htotal - hfrontp - 1;
+	drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
 
-	m->v.active = mode->vtotal * vscan / ilace;
-	m->v.synce  = ((mode->vsync_end - mode->vsync_start) * vscan / ilace) - 1;
-	m->v.blanke = m->v.synce + vbackp;
-	m->v.blanks = m->v.active - vfrontp - 1;
+	/*
+	 * DRM modes are defined in terms of a repeating interval
+	 * starting with the active display area.  The hardware modes
+	 * are defined in terms of a repeating interval starting one
+	 * unit (pixel or line) into the sync pulse.  So, add bias.
+	 */
+
+	m->h.active = mode->crtc_htotal;
+	m->h.synce  = mode->crtc_hsync_end - mode->crtc_hsync_start - 1;
+	m->h.blanke = mode->crtc_hblank_end - mode->crtc_hsync_start - 1;
+	m->h.blanks = m->h.blanke + mode->crtc_hdisplay;
+
+	m->v.active = mode->crtc_vtotal;
+	m->v.synce  = mode->crtc_vsync_end - mode->crtc_vsync_start - 1;
+	m->v.blanke = mode->crtc_vblank_end - mode->crtc_vsync_start - 1;
+	m->v.blanks = m->v.blanke + mode->crtc_vdisplay;
 
 	/*XXX: Safe underestimate, even "0" works */
-	blankus = (m->v.active - mode->vdisplay - 2) * m->h.active;
+	blankus = (m->v.active - mode->crtc_vdisplay - 2) * m->h.active;
 	blankus *= 1000;
-	blankus /= mode->clock;
+	blankus /= mode->crtc_clock;
 	m->v.blankus = blankus;
 
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
-		m->v.blank2e =  m->v.active + m->v.synce + vbackp;
-		m->v.blank2s =  m->v.blank2e + (mode->vdisplay * vscan / ilace);
+		m->v.blank2e =  m->v.active + m->v.blanke;
+		m->v.blank2s =  m->v.blank2e + mode->crtc_vdisplay;
 		m->v.active  = (m->v.active * 2) + 1;
 		m->interlace = true;
 	} else {
@@ -2071,9 +2074,8 @@ nv50_head_atomic_check_mode(struct nv50_head *head, struct nv50_head_atom *asyh)
 		m->v.blank2s = 1;
 		m->interlace = false;
 	}
-	m->clock = mode->clock;
+	m->clock = mode->crtc_clock;
 
-	drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
 	asyh->set.mode = true;
 }