drm/nouveau: allocate device object for every client

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

1 files changed, 19 insertions, 19 deletions

diff --git a/drivers/gpu/drm/nouveau/dispnv04/crtc.c b/drivers/gpu/drm/nouveau/dispnv04/crtc.c
index eb86f69d244a..ab7b69c11d40 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/crtc.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/crtc.c
@@ -113,8 +113,8 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod
 {
 	struct drm_device *dev = crtc->dev;
 	struct nouveau_drm *drm = nouveau_drm(dev);
-	struct nvkm_bios *bios = nvxx_bios(&drm->device);
-	struct nvkm_clk *clk = nvxx_clk(&drm->device);
+	struct nvkm_bios *bios = nvxx_bios(&drm->client.device);
+	struct nvkm_clk *clk = nvxx_clk(&drm->client.device);
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
 	struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
 	struct nv04_crtc_reg *regp = &state->crtc_reg[nv_crtc->index];
@@ -138,7 +138,7 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod
 	 * has yet been observed in allowing the use a single stage pll on all
 	 * nv43 however.  the behaviour of single stage use is untested on nv40
 	 */
-	if (drm->device.info.chipset > 0x40 && dot_clock <= (pll_lim.vco1.max_freq / 2))
+	if (drm->client.device.info.chipset > 0x40 && dot_clock <= (pll_lim.vco1.max_freq / 2))
 		memset(&pll_lim.vco2, 0, sizeof(pll_lim.vco2));
 
 
@@ -148,10 +148,10 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod
 	state->pllsel &= PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK;
 
 	/* The blob uses this always, so let's do the same */
-	if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE)
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
 		state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_USE_VPLL2_TRUE;
 	/* again nv40 and some nv43 act more like nv3x as described above */
-	if (drm->device.info.chipset < 0x41)
+	if (drm->client.device.info.chipset < 0x41)
 		state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_MPLL |
 				 NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_NVPLL;
 	state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK;
@@ -270,7 +270,7 @@ nv_crtc_mode_set_vga(struct drm_crtc *crtc, struct drm_display_mode *mode)
 		horizEnd = horizTotal - 2;
 		horizBlankEnd = horizTotal + 4;
 #if 0
-		if (dev->overlayAdaptor && drm->device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
+		if (dev->overlayAdaptor && drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
 			/* This reportedly works around some video overlay bandwidth problems */
 			horizTotal += 2;
 #endif
@@ -505,7 +505,7 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode)
 	regp->cursor_cfg = NV_PCRTC_CURSOR_CONFIG_CUR_LINES_64 |
 			     NV_PCRTC_CURSOR_CONFIG_CUR_PIXELS_64 |
 			     NV_PCRTC_CURSOR_CONFIG_ADDRESS_SPACE_PNVM;
-	if (drm->device.info.chipset >= 0x11)
+	if (drm->client.device.info.chipset >= 0x11)
 		regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_CUR_BPP_32;
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_DOUBLE_SCAN_ENABLE;
@@ -546,26 +546,26 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode)
 	 * 1 << 30 on 0x60.830), for no apparent reason */
 	regp->CRTC[NV_CIO_CRE_59] = off_chip_digital;
 
-	if (drm->device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
 		regp->CRTC[0x9f] = off_chip_digital ? 0x11 : 0x1;
 
 	regp->crtc_830 = mode->crtc_vdisplay - 3;
 	regp->crtc_834 = mode->crtc_vdisplay - 1;
 
-	if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE)
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
 		/* This is what the blob does */
 		regp->crtc_850 = NVReadCRTC(dev, 0, NV_PCRTC_850);
 
-	if (drm->device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE)
 		regp->gpio_ext = NVReadCRTC(dev, 0, NV_PCRTC_GPIO_EXT);
 
-	if (drm->device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
 		regp->crtc_cfg = NV10_PCRTC_CONFIG_START_ADDRESS_HSYNC;
 	else
 		regp->crtc_cfg = NV04_PCRTC_CONFIG_START_ADDRESS_HSYNC;
 
 	/* Some misc regs */
-	if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE) {
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) {
 		regp->CRTC[NV_CIO_CRE_85] = 0xFF;
 		regp->CRTC[NV_CIO_CRE_86] = 0x1;
 	}
@@ -577,7 +577,7 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode)
 
 	/* Generic PRAMDAC regs */
 
-	if (drm->device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS)
 		/* Only bit that bios and blob set. */
 		regp->nv10_cursync = (1 << 25);
 
@@ -586,7 +586,7 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode)
 				NV_PRAMDAC_GENERAL_CONTROL_PIXMIX_ON;
 	if (fb->format->depth == 16)
 		regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL;
-	if (drm->device.info.chipset >= 0x11)
+	if (drm->client.device.info.chipset >= 0x11)
 		regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_PIPE_LONG;
 
 	regp->ramdac_630 = 0; /* turn off green mode (tv test pattern?) */
@@ -649,7 +649,7 @@ nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
 
 	nv_crtc_mode_set_vga(crtc, adjusted_mode);
 	/* calculated in nv04_dfp_prepare, nv40 needs it written before calculating PLLs */
-	if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE)
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE)
 		NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, nv04_display(dev)->mode_reg.sel_clk);
 	nv_crtc_mode_set_regs(crtc, adjusted_mode);
 	nv_crtc_calc_state_ext(crtc, mode, adjusted_mode->clock);
@@ -710,7 +710,7 @@ static void nv_crtc_prepare(struct drm_crtc *crtc)
 
 	/* Some more preparation. */
 	NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA);
-	if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE) {
+	if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) {
 		uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900);
 		NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900, reg900 & ~0x10000);
 	}
@@ -886,7 +886,7 @@ nv04_crtc_do_mode_set_base(struct drm_crtc *crtc,
 	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FF_INDEX);
 	crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FFLWM__INDEX);
 
-	if (drm->device.info.family >= NV_DEVICE_INFO_V0_KELVIN) {
+	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_KELVIN) {
 		regp->CRTC[NV_CIO_CRE_47] = arb_lwm >> 8;
 		crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_47);
 	}
@@ -967,7 +967,7 @@ static void nv11_cursor_upload(struct drm_device *dev, struct nouveau_bo *src,
 		{
 			struct nouveau_drm *drm = nouveau_drm(dev);
 
-			if (drm->device.info.chipset == 0x11) {
+			if (drm->client.device.info.chipset == 0x11) {
 				pixel = ((pixel & 0x000000ff) << 24) |
 					((pixel & 0x0000ff00) << 8) |
 					((pixel & 0x00ff0000) >> 8) |
@@ -1008,7 +1008,7 @@ nv04_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
 	if (ret)
 		goto out;
 
-	if (drm->device.info.chipset >= 0x11)
+	if (drm->client.device.info.chipset >= 0x11)
 		nv11_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo);
 	else
 		nv04_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo);