Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux

Merge drm updates from Dave Airlie:
 "This is the main drm pull request for 4.8.

  I'm down with a cold at the moment so hopefully this isn't in too bad
  a state, I finished pulling stuff last week mostly (nouveau fixes just
  went in today), so only this message should be influenced by illness.
  Apologies to anyone who's major feature I missed :-)

  Core:
        Lockless GEM BO freeing
        Non-blocking atomic work
        Documentation changes (rst/sphinx)
        Prep for new fencing changes
        Simple display helpers
        Master/auth changes
        Register/unregister rework
        Loads of trivial patches/fixes.

  New stuff:
        ARM Mali display driver (not the 3D chip)
        sii902x RGB->HDMI bridge

  Panel:
        Support for new panels
        Improved backlight support

  Bridge:
        Convert ADV7511 to bridge driver
        ADV7533 support
        TC358767 (DSI/DPI to eDP) encoder chip support

  i915:
        BXT support enabled by default
        GVT-g infrastructure
        GuC command submission and fixes
        BXT workarounds
        SKL/BKL workarounds
        Demidlayering device registration
        Thundering herd fixes
        Missing pci ids
        Atomic updates

  amdgpu/radeon:
        ATPX improvements for better dGPU power control on PX systems
        New power features for CZ/BR/ST
        Pipelined BO moves and evictions in TTM
        GPU scheduler improvements
        GPU reset improvements
        Overclocking on dGPUs with amdgpu
        Polaris powermanagement enabled

  nouveau:
        GK20A/GM20B volt and clock improvements.
        Initial support for GP100/GP104 GPUs, GP104 will not yet support
        acceleration due to NVIDIA having not released firmware for them as of yet.

  exynos:
        Exynos5433 SoC with IOMMU support.

  vc4:
        Shader validation for branching

  imx-drm:
        Atomic mode setting conversion
        Reworked DMFC FIFO allocation
        External bridge support

  analogix-dp:
        RK3399 eDP support
        Lots of fixes.

  rockchip:
        Lots of small fixes.

  msm:
        DT bindings cleanups
        Shrinker and madvise support
        ASoC HDMI codec support

  tegra:
        Host1x driver cleanups
        SOR reworking for DP support
        Runtime PM support

  omapdrm:
        PLL enhancements
        Header refactoring
        Gamma table support

  arcgpu:
        Simulator support

  virtio-gpu:
        Atomic modesetting fixes.

  rcar-du:
        Misc fixes.

  mediatek:
        MT8173 HDMI support

  sti:
        ASOC HDMI codec support
        Minor fixes

  fsl-dcu:
        Suspend/resume support
        Bridge support

  amdkfd:
        Minor fixes.

  etnaviv:
        Enable GPU clock gating

  hisilicon:
        Vblank and other fixes"

* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
  drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
  drm/nouveau/acpi: fix lockup with PCIe runtime PM
  drm/nouveau/acpi: check for function 0x1B before using it
  drm/nouveau/acpi: return supported DSM functions
  drm/nouveau/acpi: ensure matching ACPI handle and supported functions
  drm/nouveau/fbcon: fix font width not divisible by 8
  drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
  drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
  drm/amdgpu: add query device id and revision id into system info entry at CGS
  drm/amdgpu: add new definition in bif header
  drm/amd/powerplay: rename smum header guards
  drm/amdgpu: enable UVD context buffer for older HW
  drm/amdgpu: fix default UVD context size
  drm/amdgpu: fix incorrect type of info_id
  drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
  drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
  drm/amdgpu: enable UVD VM only on polaris
  drm/amdgpu: increase timeout of IB test
  drm/amdgpu: add destroy session when generate VCE destroy msg.
  drm/amd: fix deadlock of job_list_lock V2
  ...

1 files changed, 216 insertions, 0 deletions

diff --git a/drivers/gpu/drm/arm/malidp_crtc.c b/drivers/gpu/drm/arm/malidp_crtc.c
new file mode 100644
index 000000000000..08e6a71f5d05
--- /dev/null
+++ b/drivers/gpu/drm/arm/malidp_crtc.c
@@ -0,0 +1,216 @@
+/*
+ * (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
+ * Author: Liviu Dudau <Liviu.Dudau@arm.com>
+ *
+ * This program is free software and is provided to you under the terms of the
+ * GNU General Public License version 2 as published by the Free Software
+ * Foundation, and any use by you of this program is subject to the terms
+ * of such GNU licence.
+ *
+ * ARM Mali DP500/DP550/DP650 driver (crtc operations)
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <linux/clk.h>
+#include <video/videomode.h>
+
+#include "malidp_drv.h"
+#include "malidp_hw.h"
+
+static bool malidp_crtc_mode_fixup(struct drm_crtc *crtc,
+				   const struct drm_display_mode *mode,
+				   struct drm_display_mode *adjusted_mode)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	/*
+	 * check that the hardware can drive the required clock rate,
+	 * but skip the check if the clock is meant to be disabled (req_rate = 0)
+	 */
+	long rate, req_rate = mode->crtc_clock * 1000;
+
+	if (req_rate) {
+		rate = clk_round_rate(hwdev->mclk, req_rate);
+		if (rate < req_rate) {
+			DRM_DEBUG_DRIVER("mclk clock unable to reach %d kHz\n",
+					 mode->crtc_clock);
+			return false;
+		}
+
+		rate = clk_round_rate(hwdev->pxlclk, req_rate);
+		if (rate != req_rate) {
+			DRM_DEBUG_DRIVER("pxlclk doesn't support %ld Hz\n",
+					 req_rate);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static void malidp_crtc_enable(struct drm_crtc *crtc)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+	struct videomode vm;
+
+	drm_display_mode_to_videomode(&crtc->state->adjusted_mode, &vm);
+
+	clk_prepare_enable(hwdev->pxlclk);
+
+	/* mclk needs to be set to the same or higher rate than pxlclk */
+	clk_set_rate(hwdev->mclk, crtc->state->adjusted_mode.crtc_clock * 1000);
+	clk_set_rate(hwdev->pxlclk, crtc->state->adjusted_mode.crtc_clock * 1000);
+
+	hwdev->modeset(hwdev, &vm);
+	hwdev->leave_config_mode(hwdev);
+	drm_crtc_vblank_on(crtc);
+}
+
+static void malidp_crtc_disable(struct drm_crtc *crtc)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+
+	drm_crtc_vblank_off(crtc);
+	hwdev->enter_config_mode(hwdev);
+	clk_disable_unprepare(hwdev->pxlclk);
+}
+
+static int malidp_crtc_atomic_check(struct drm_crtc *crtc,
+				    struct drm_crtc_state *state)
+{
+	struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
+	struct malidp_hw_device *hwdev = malidp->dev;
+	struct drm_plane *plane;
+	const struct drm_plane_state *pstate;
+	u32 rot_mem_free, rot_mem_usable;
+	int rotated_planes = 0;
+
+	/*
+	 * check if there is enough rotation memory available for planes
+	 * that need 90° and 270° rotation. Each plane has set its required
+	 * memory size in the ->plane_check() callback, here we only make
+	 * sure that the sums are less that the total usable memory.
+	 *
+	 * The rotation memory allocation algorithm (for each plane):
+	 *  a. If no more rotated planes exist, all remaining rotate
+	 *     memory in the bank is available for use by the plane.
+	 *  b. If other rotated planes exist, and plane's layer ID is
+	 *     DE_VIDEO1, it can use all the memory from first bank if
+	 *     secondary rotation memory bank is available, otherwise it can
+	 *     use up to half the bank's memory.
+	 *  c. If other rotated planes exist, and plane's layer ID is not
+	 *     DE_VIDEO1, it can use half of the available memory
+	 *
+	 * Note: this algorithm assumes that the order in which the planes are
+	 * checked always has DE_VIDEO1 plane first in the list if it is
+	 * rotated. Because that is how we create the planes in the first
+	 * place, under current DRM version things work, but if ever the order
+	 * in which drm_atomic_crtc_state_for_each_plane() iterates over planes
+	 * changes, we need to pre-sort the planes before validation.
+	 */
+
+	/* first count the number of rotated planes */
+	drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
+		if (pstate->rotation & MALIDP_ROTATED_MASK)
+			rotated_planes++;
+	}
+
+	rot_mem_free = hwdev->rotation_memory[0];
+	/*
+	 * if we have more than 1 plane using rotation memory, use the second
+	 * block of rotation memory as well
+	 */
+	if (rotated_planes > 1)
+		rot_mem_free += hwdev->rotation_memory[1];
+
+	/* now validate the rotation memory requirements */
+	drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) {
+		struct malidp_plane *mp = to_malidp_plane(plane);
+		struct malidp_plane_state *ms = to_malidp_plane_state(pstate);
+
+		if (pstate->rotation & MALIDP_ROTATED_MASK) {
+			/* process current plane */
+			rotated_planes--;
+
+			if (!rotated_planes) {
+				/* no more rotated planes, we can use what's left */
+				rot_mem_usable = rot_mem_free;
+			} else {
+				if ((mp->layer->id != DE_VIDEO1) ||
+				    (hwdev->rotation_memory[1] == 0))
+					rot_mem_usable = rot_mem_free / 2;
+				else
+					rot_mem_usable = hwdev->rotation_memory[0];
+			}
+
+			rot_mem_free -= rot_mem_usable;
+
+			if (ms->rotmem_size > rot_mem_usable)
+				return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static const struct drm_crtc_helper_funcs malidp_crtc_helper_funcs = {
+	.mode_fixup = malidp_crtc_mode_fixup,
+	.enable = malidp_crtc_enable,
+	.disable = malidp_crtc_disable,
+	.atomic_check = malidp_crtc_atomic_check,
+};
+
+static const struct drm_crtc_funcs malidp_crtc_funcs = {
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+int malidp_crtc_init(struct drm_device *drm)
+{
+	struct malidp_drm *malidp = drm->dev_private;
+	struct drm_plane *primary = NULL, *plane;
+	int ret;
+
+	ret = malidp_de_planes_init(drm);
+	if (ret < 0) {
+		DRM_ERROR("Failed to initialise planes\n");
+		return ret;
+	}
+
+	drm_for_each_plane(plane, drm) {
+		if (plane->type == DRM_PLANE_TYPE_PRIMARY) {
+			primary = plane;
+			break;
+		}
+	}
+
+	if (!primary) {
+		DRM_ERROR("no primary plane found\n");
+		ret = -EINVAL;
+		goto crtc_cleanup_planes;
+	}
+
+	ret = drm_crtc_init_with_planes(drm, &malidp->crtc, primary, NULL,
+					&malidp_crtc_funcs, NULL);
+
+	if (!ret) {
+		drm_crtc_helper_add(&malidp->crtc, &malidp_crtc_helper_funcs);
+		return 0;
+	}
+
+crtc_cleanup_planes:
+	malidp_de_planes_destroy(drm);
+
+	return ret;
+}