summaryrefslogtreecommitdiff
path: root/drivers/gpio
diff options
context:
space:
mode:
authorGrygorii Strashko <grygorii.strashko@ti.com>2015-09-25 22:28:03 +0300
committerLinus Walleij <linus.walleij@linaro.org>2015-10-02 23:08:21 +0300
commit450fa54cfd66e3dda6eda26256637ee8928af12a (patch)
treee2cfa718761339afad7d8a816aaae72caf106e37 /drivers/gpio
parentaca82d1cbb49af34b69ecd4571a0fe48ad9247c1 (diff)
downloadlinux-450fa54cfd66e3dda6eda26256637ee8928af12a.tar.xz
gpio: omap: convert to use generic irq handler
This patch converts TI OMAP GPIO driver to use generic irq handler instead of chained IRQ handler. This way OMAP GPIO driver will be compatible with RT kernel where it will be forced thread IRQ handler while in non-RT kernel it still will be executed in HW IRQ context. As part of this change the IRQ wakeup configuration is applied to GPIO Bank IRQ as it now will be under control of IRQ PM Core during suspend. There are also additional benefits: - on-RT kernel there will be no complains any more about PM runtime usage in atomic context "BUG: sleeping function called from invalid context"; - GPIO bank IRQs will appear in /proc/interrupts and its usage statistic will be visible; - GPIO bank IRQs could be configured through IRQ proc_fs interface and, as result, could be a part of IRQ balancing process if needed; - GPIO bank IRQs will be under control of IRQ PM Core during suspend to RAM. Disadvantage: - additional runtime overhed as call chain till omap_gpio_irq_handler() will be longer now - necessity to use wa_lock in omap_gpio_irq_handler() to W/A warning in handle_irq_event_percpu() WARNING: CPU: 1 PID: 35 at kernel/irq/handle.c:149 handle_irq_event_percpu+0x51c/0x638() This patch doesn't fully follows recommendations provided by Sebastian Andrzej Siewior [1], because It's required to go through and check all GPIO IRQ pin states as fast as possible and pass control to handle_level_irq or handle_edge_irq. handle_level_irq or handle_edge_irq will perform actions specific for IRQ triggering type and wakeup corresponding registered threaded IRQ handler (at least it's expected to be threaded). IRQs can be lost if handle_nested_irq() will be used, because excecution time of some pin specific GPIO IRQ handler can be very significant and require accessing ext. devices (I2C). Idea of such kind reworking was also discussed in [2]. [1] http://www.spinics.net/lists/linux-omap/msg120665.html [2] http://www.spinics.net/lists/linux-omap/msg119516.html Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Austin Schuh <austin@peloton-tech.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/gpio-omap.c55
1 files changed, 27 insertions, 28 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index a25469193e41..376827f48d53 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -59,6 +59,7 @@ struct gpio_bank {
u32 level_mask;
u32 toggle_mask;
raw_spinlock_t lock;
+ raw_spinlock_t wa_lock;
struct gpio_chip chip;
struct clk *dbck;
u32 mod_usage;
@@ -649,8 +650,13 @@ static int omap_gpio_wake_enable(struct irq_data *d, unsigned int enable)
{
struct gpio_bank *bank = omap_irq_data_get_bank(d);
unsigned offset = d->hwirq;
+ int ret;
+
+ ret = omap_set_gpio_wakeup(bank, offset, enable);
+ if (!ret)
+ ret = irq_set_irq_wake(bank->irq, enable);
- return omap_set_gpio_wakeup(bank, offset, enable);
+ return ret;
}
static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
@@ -704,26 +710,21 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
* line's interrupt handler has been run, we may miss some nested
* interrupts.
*/
-static void omap_gpio_irq_handler(struct irq_desc *desc)
+static irqreturn_t omap_gpio_irq_handler(int irq, void *gpiobank)
{
void __iomem *isr_reg = NULL;
u32 isr;
unsigned int bit;
- struct gpio_bank *bank;
- int unmasked = 0;
- struct irq_chip *irqchip = irq_desc_get_chip(desc);
- struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+ struct gpio_bank *bank = gpiobank;
+ unsigned long wa_lock_flags;
unsigned long lock_flags;
- chained_irq_enter(irqchip, desc);
-
- bank = container_of(chip, struct gpio_bank, chip);
isr_reg = bank->base + bank->regs->irqstatus;
- pm_runtime_get_sync(bank->dev);
-
if (WARN_ON(!isr_reg))
goto exit;
+ pm_runtime_get_sync(bank->dev);
+
while (1) {
u32 isr_saved, level_mask = 0;
u32 enabled;
@@ -745,13 +746,6 @@ static void omap_gpio_irq_handler(struct irq_desc *desc)
raw_spin_unlock_irqrestore(&bank->lock, lock_flags);
- /* if there is only edge sensitive GPIO pin interrupts
- configured, we could unmask GPIO bank interrupt immediately */
- if (!level_mask && !unmasked) {
- unmasked = 1;
- chained_irq_exit(irqchip, desc);
- }
-
if (!isr)
break;
@@ -772,18 +766,18 @@ static void omap_gpio_irq_handler(struct irq_desc *desc)
raw_spin_unlock_irqrestore(&bank->lock, lock_flags);
+ raw_spin_lock_irqsave(&bank->wa_lock, wa_lock_flags);
+
generic_handle_irq(irq_find_mapping(bank->chip.irqdomain,
bit));
+
+ raw_spin_unlock_irqrestore(&bank->wa_lock,
+ wa_lock_flags);
}
}
- /* if bank has any level sensitive GPIO pin interrupt
- configured, we must unmask the bank interrupt only after
- handler(s) are executed in order to avoid spurious bank
- interrupt */
exit:
- if (!unmasked)
- chained_irq_exit(irqchip, desc);
pm_runtime_put(bank->dev);
+ return IRQ_HANDLED;
}
static unsigned int omap_gpio_irq_startup(struct irq_data *d)
@@ -1135,7 +1129,7 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
}
ret = gpiochip_irqchip_add(&bank->chip, irqc,
- irq_base, omap_gpio_irq_handler,
+ irq_base, handle_bad_irq,
IRQ_TYPE_NONE);
if (ret) {
@@ -1144,10 +1138,14 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
return -ENODEV;
}
- gpiochip_set_chained_irqchip(&bank->chip, irqc,
- bank->irq, omap_gpio_irq_handler);
+ gpiochip_set_chained_irqchip(&bank->chip, irqc, bank->irq, NULL);
- return 0;
+ ret = devm_request_irq(bank->dev, bank->irq, omap_gpio_irq_handler,
+ 0, dev_name(bank->dev), bank);
+ if (ret)
+ gpiochip_remove(&bank->chip);
+
+ return ret;
}
static const struct of_device_id omap_gpio_match[];
@@ -1229,6 +1227,7 @@ static int omap_gpio_probe(struct platform_device *pdev)
bank->set_dataout = omap_set_gpio_dataout_mask;
raw_spin_lock_init(&bank->lock);
+ raw_spin_lock_init(&bank->wa_lock);
/* Static mapping, never released */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);