Merge branch 'power-supply-scope' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen

32 files changed, 6523 insertions, 1869 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd96d4b..8482a23887dc 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -95,14 +95,18 @@ config GPIO_EP93XX
 	depends on ARCH_EP93XX
 	select GPIO_GENERIC
 
-config GPIO_EXYNOS4
-	def_bool y
-	depends on CPU_EXYNOS4210
-
 config GPIO_MPC5200
 	def_bool y
 	depends on PPC_MPC52xx
 
+config GPIO_MPC8XXX
+	bool "MPC512x/MPC8xxx GPIO support"
+	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
+		   FSL_SOC_BOOKE || PPC_86xx
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
+
 config GPIO_MSM_V1
 	tristate "Qualcomm MSM GPIO v1"
 	depends on GPIOLIB && ARCH_MSM
@@ -131,18 +135,6 @@ config GPIO_MXS
 	select GPIO_GENERIC
 	select GENERIC_IRQ_CHIP
 
-config GPIO_PLAT_SAMSUNG
-	def_bool y
-	depends on SAMSUNG_GPIOLIB_4BIT
-
-config GPIO_S5PC100
-	def_bool y
-	depends on CPU_S5PC100
-
-config GPIO_S5PV210
-	def_bool y
-	depends on CPU_S5PV210
-
 config GPIO_PL061
 	bool "PrimeCell PL061 GPIO support"
 	depends on ARM_AMBA
@@ -178,9 +170,18 @@ config GPIO_SCH
 	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
 	  core power rail and 9 from suspend power supply.
 
+config GPIO_U300
+	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+	depends on GPIOLIB && ARCH_U300
+	help
+	  Say yes here to support GPIO interface on ST-Ericsson U300.
+	  The names of the two IP block variants supported are
+	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+	  ports of 8 GPIO pins each.
+
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on MFD_SUPPORT && PCI
+	depends on PCI
 	select MFD_CORE
 	select MFD_VX855
 	help
@@ -388,6 +389,7 @@ config GPIO_LANGWELL
 config GPIO_PCH
 	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
 	depends on PCI && X86
+	select GENERIC_IRQ_CHIP
 	help
 	  This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
@@ -402,6 +404,7 @@ config GPIO_PCH
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
 	depends on PCI
+	select GENERIC_IRQ_CHIP
 	help
 	  ML7213 is companion chip for Intel Atom E6xx series.
 	  This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output
@@ -417,7 +420,6 @@ config GPIO_TIMBERDALE
 config GPIO_RDC321X
 	tristate "RDC R-321x GPIO support"
 	depends on PCI
-	select MFD_SUPPORT
 	select MFD_CORE
 	select MFD_RDC321X
 	help
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948c96f0..dbcb0bcfd8da 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,11 +14,13 @@ obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
-obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_LANGWELL)	+= gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o
 obj-$(CONFIG_GPIO_MAX7300)	+= gpio-max7300.o
 obj-$(CONFIG_GPIO_MAX7301)	+= gpio-max7301.o
@@ -27,6 +29,7 @@ obj-$(CONFIG_GPIO_MC33880)	+= gpio-mc33880.o
 obj-$(CONFIG_GPIO_MCP23S08)	+= gpio-mcp23s08.o
 obj-$(CONFIG_GPIO_ML_IOH)	+= gpio-ml-ioh.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
+obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSM_V1)	+= gpio-msm-v1.o
 obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
@@ -37,18 +40,17 @@ obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
-
-obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
-obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
-obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
-
+obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
+obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
 obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
 obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index ff525c0958dd..a31ad6f5d910 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -15,6 +15,7 @@
 #include <linux/spi/74x164.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 struct gen_74x164_chip {
 	struct spi_device	*spi;
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
new file mode 100644
index 000000000000..df0d59570a84
--- /dev/null
+++ b/drivers/gpio/gpio-davinci.c
@@ -0,0 +1,455 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006-2007 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+struct davinci_gpio_regs {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+#define chip2controller(chip)	\
+	container_of(chip, struct davinci_gpio_controller, chip)
+
+static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static void __iomem *gpio_base;
+
+static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
+{
+	void __iomem *ptr;
+
+	if (gpio < 32 * 1)
+		ptr = gpio_base + 0x10;
+	else if (gpio < 32 * 2)
+		ptr = gpio_base + 0x38;
+	else if (gpio < 32 * 3)
+		ptr = gpio_base + 0x60;
+	else if (gpio < 32 * 4)
+		ptr = gpio_base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = gpio_base + 0xb0;
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
+{
+	struct davinci_gpio_regs __iomem *g;
+
+	g = (__force struct davinci_gpio_regs __iomem *)irq_get_chip_data(irq);
+
+	return g;
+}
+
+static int __init davinci_gpio_irq_setup(void);
+
+/*--------------------------------------------------------------------------*/
+
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+			unsigned offset, bool out, int value)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+	unsigned long flags;
+	u32 temp;
+	u32 mask = 1 << offset;
+
+	spin_lock_irqsave(&d->lock, flags);
+	temp = __raw_readl(&g->dir);
+	if (out) {
+		temp &= ~mask;
+		__raw_writel(mask, value ? &g->set_data : &g->clr_data);
+	} else {
+		temp |= mask;
+	}
+	__raw_writel(temp, &g->dir);
+	spin_unlock_irqrestore(&d->lock, flags);
+
+	return 0;
+}
+
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	return __davinci_direction(chip, offset, true, value);
+}
+
+/*
+ * Read the pin's value (works even if it's set up as output);
+ * returns zero/nonzero.
+ *
+ * Note that changes are synched to the GPIO clock, so reading values back
+ * right after you've set them may give old values.
+ */
+static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+
+	return (1 << offset) & __raw_readl(&g->in_data);
+}
+
+/*
+ * Assuming the pin is muxed as a gpio output, set its output value.
+ */
+static void
+davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+
+	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
+}
+
+static int __init davinci_gpio_setup(void)
+{
+	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_regs *regs;
+
+	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
+		return 0;
+
+	/*
+	 * The gpio banks conceptually expose a segmented bitmap,
+	 * and "ngpio" is one more than the largest zero-based
+	 * bit index that's valid.
+	 */
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+		ngpio = DAVINCI_N_GPIO;
+
+	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!gpio_base))
+		return -ENOMEM;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+		chips[i].chip.label = "DaVinci";
+
+		chips[i].chip.direction_input = davinci_direction_in;
+		chips[i].chip.get = davinci_gpio_get;
+		chips[i].chip.direction_output = davinci_direction_out;
+		chips[i].chip.set = davinci_gpio_set;
+
+		chips[i].chip.base = base;
+		chips[i].chip.ngpio = ngpio - base;
+		if (chips[i].chip.ngpio > 32)
+			chips[i].chip.ngpio = 32;
+
+		spin_lock_init(&chips[i].lock);
+
+		regs = gpio2regs(base);
+		chips[i].regs = regs;
+		chips[i].set_data = &regs->set_data;
+		chips[i].clr_data = &regs->clr_data;
+		chips[i].in_data = &regs->in_data;
+
+		gpiochip_add(&chips[i].chip);
+	}
+
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+
+	davinci_gpio_irq_setup();
+	return 0;
+}
+pure_initcall(davinci_gpio_setup);
+
+/*--------------------------------------------------------------------------*/
+/*
+ * We expect irqs will normally be set up as input pins, but they can also be
+ * used as output pins ... which is convenient for testing.
+ *
+ * NOTE:  The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead.
+ *
+ * All those INTC hookups (direct, plus several IRQ banks) can also
+ * serve as EDMA event triggers.
+ */
+
+static void gpio_irq_disable(struct irq_data *d)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+	u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+	__raw_writel(mask, &g->clr_falling);
+	__raw_writel(mask, &g->clr_rising);
+}
+
+static void gpio_irq_enable(struct irq_data *d)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+	u32 mask = (u32) irq_data_get_irq_handler_data(d);
+	unsigned status = irqd_get_trigger_type(d);
+
+	status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+	if (!status)
+		status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+
+	if (status & IRQ_TYPE_EDGE_FALLING)
+		__raw_writel(mask, &g->set_falling);
+	if (status & IRQ_TYPE_EDGE_RISING)
+		__raw_writel(mask, &g->set_rising);
+}
+
+static int gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct irq_chip gpio_irqchip = {
+	.name		= "GPIO",
+	.irq_enable	= gpio_irq_enable,
+	.irq_disable	= gpio_irq_disable,
+	.irq_set_type	= gpio_irq_type,
+	.flags		= IRQCHIP_SET_TYPE_MASKED,
+};
+
+static void
+gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct davinci_gpio_regs __iomem *g;
+	u32 mask = 0xffff;
+	struct davinci_gpio_controller *d;
+
+	d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc);
+	g = (struct davinci_gpio_regs __iomem *)d->regs;
+
+	/* we only care about one bank */
+	if (irq & 1)
+		mask <<= 16;
+
+	/* temporarily mask (level sensitive) parent IRQ */
+	desc->irq_data.chip->irq_mask(&desc->irq_data);
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+	while (1) {
+		u32		status;
+		int		n;
+		int		res;
+
+		/* ack any irqs */
+		status = __raw_readl(&g->intstat) & mask;
+		if (!status)
+			break;
+		__raw_writel(status, &g->intstat);
+
+		/* now demux them to the right lowlevel handler */
+		n = d->irq_base;
+		if (irq & 1) {
+			n += 16;
+			status >>= 16;
+		}
+
+		while (status) {
+			res = ffs(status);
+			n += res;
+			generic_handle_irq(n - 1);
+			status >>= res;
+		}
+	}
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
+	/* now it may re-trigger */
+}
+
+static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *d = chip2controller(chip);
+
+	if (d->irq_base >= 0)
+		return d->irq_base + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	/* NOTE:  we assume for now that only irqs in the first gpio_chip
+	 * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs).
+	 */
+	if (offset < soc_info->gpio_unbanked)
+		return soc_info->gpio_irq + offset;
+	else
+		return -ENODEV;
+}
+
+static int gpio_irq_type_unbanked(struct irq_data *d, unsigned trigger)
+{
+	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
+	u32 mask = (u32) irq_data_get_irq_handler_data(d);
+
+	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		return -EINVAL;
+
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+		     ? &g->set_falling : &g->clr_falling);
+	__raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+		     ? &g->set_rising : &g->clr_rising);
+
+	return 0;
+}
+
+/*
+ * NOTE:  for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
+ * calls ... so if no gpios are wakeup events the clock can be disabled,
+ * with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
+ * (dm6446) can be set appropriately for GPIOV33 pins.
+ */
+
+static int __init davinci_gpio_irq_setup(void)
+{
+	unsigned	gpio, irq, bank;
+	struct clk	*clk;
+	u32		binten = 0;
+	unsigned	ngpio, bank_irq;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_regs	__iomem *g;
+
+	ngpio = soc_info->gpio_num;
+
+	bank_irq = soc_info->gpio_irq;
+	if (bank_irq == 0) {
+		printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+		return -EINVAL;
+	}
+
+	clk = clk_get(NULL, "gpio");
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "Error %ld getting gpio clock?\n",
+		       PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+	clk_enable(clk);
+
+	/* Arrange gpio_to_irq() support, handling either direct IRQs or
+	 * banked IRQs.  Having GPIOs in the first GPIO bank use direct
+	 * IRQs, while the others use banked IRQs, would need some setup
+	 * tweaks to recognize hardware which can do that.
+	 */
+	for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) {
+		chips[bank].chip.to_irq = gpio_to_irq_banked;
+		chips[bank].irq_base = soc_info->gpio_unbanked
+			? -EINVAL
+			: (soc_info->intc_irq_num + gpio);
+	}
+
+	/*
+	 * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+	 * controller only handling trigger modes.  We currently assume no
+	 * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs.
+	 */
+	if (soc_info->gpio_unbanked) {
+		static struct irq_chip gpio_irqchip_unbanked;
+
+		/* pass "bank 0" GPIO IRQs to AINTC */
+		chips[0].chip.to_irq = gpio_to_irq_unbanked;
+		binten = BIT(0);
+
+		/* AINTC handles mask/unmask; GPIO handles triggering */
+		irq = bank_irq;
+		gpio_irqchip_unbanked = *irq_get_chip(irq);
+		gpio_irqchip_unbanked.name = "GPIO-AINTC";
+		gpio_irqchip_unbanked.irq_set_type = gpio_irq_type_unbanked;
+
+		/* default trigger: both edges */
+		g = gpio2regs(0);
+		__raw_writel(~0, &g->set_falling);
+		__raw_writel(~0, &g->set_rising);
+
+		/* set the direct IRQs up to use that irqchip */
+		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
+			irq_set_chip(irq, &gpio_irqchip_unbanked);
+			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+			irq_set_chip_data(irq, (__force void *)g);
+			irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH);
+		}
+
+		goto done;
+	}
+
+	/*
+	 * Or, AINTC can handle IRQs for banks of 16 GPIO IRQs, which we
+	 * then chain through our own handler.
+	 */
+	for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+			gpio < ngpio;
+			bank++, bank_irq++) {
+		unsigned		i;
+
+		/* disabled by default, enabled only as needed */
+		g = gpio2regs(gpio);
+		__raw_writel(~0, &g->clr_falling);
+		__raw_writel(~0, &g->clr_rising);
+
+		/* set up all irqs in this bank */
+		irq_set_chained_handler(bank_irq, gpio_irq_handler);
+
+		/*
+		 * Each chip handles 32 gpios, and each irq bank consists of 16
+		 * gpio irqs. Pass the irq bank's corresponding controller to
+		 * the chained irq handler.
+		 */
+		irq_set_handler_data(bank_irq, &chips[gpio / 32]);
+
+		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
+			irq_set_chip(irq, &gpio_irqchip);
+			irq_set_chip_data(irq, (__force void *)g);
+			irq_set_handler_data(irq, (void *)__gpio_mask(gpio));
+			irq_set_handler(irq, handle_simple_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+
+		binten |= BIT(bank);
+	}
+
+done:
+	/* BINTEN -- per-bank interrupt enable. genirq would also let these
+	 * bits be set/cleared dynamically.
+	 */
+	__raw_writel(binten, gpio_base + 0x08);
+
+	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
+
+	return 0;
+}
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 72fb9c665320..1c0fc3756cb1 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -15,6 +15,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/init.h>
+#include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -23,6 +24,9 @@
 #include <linux/basic_mmio_gpio.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 struct ep93xx_gpio {
 	void __iomem		*mmio_base;
@@ -307,6 +311,21 @@ static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
 	return 0;
 }
 
+/*
+ * Map GPIO A0..A7  (0..7)  to irq 64..71,
+ *          B0..B7  (7..15) to irq 72..79, and
+ *          F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	int gpio = chip->base + offset;
+
+	if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+		return -EINVAL;
+
+	return 64 + gpio;
+}
+
 static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
 	void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
 {
@@ -321,8 +340,10 @@ static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
 	bgc->gc.label = bank->label;
 	bgc->gc.base = bank->base;
 
-	if (bank->has_debounce)
+	if (bank->has_debounce) {
 		bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+		bgc->gc.to_irq = ep93xx_gpio_to_irq;
+	}
 
 	return gpiochip_add(&bgc->gc);
 }
diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c
deleted file mode 100644
index d24b337cf1ac..000000000000
--- a/drivers/gpio/gpio-exynos4.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * EXYNOS4 - GPIOlib support
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip,
-				unsigned int off, s3c_gpio_pull_t pull)
-{
-	if (pull == S3C_GPIO_PULL_UP)
-		pull = 3;
-
-	return s3c_gpio_setpull_updown(chip, off, pull);
-}
-
-s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip,
-						unsigned int off)
-{
-	s3c_gpio_pull_t pull;
-
-	pull = s3c_gpio_getpull_updown(chip, off);
-	if (pull == 3)
-		pull = S3C_GPIO_PULL_UP;
-
-	return pull;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_exynos4,
-	.get_pull	= s3c_gpio_getpull_exynos4,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_exynos4,
-	.get_pull	= s3c_gpio_getpull_exynos4,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPA0(0),
-			.ngpio	= EXYNOS4_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPA1(0),
-			.ngpio	= EXYNOS4_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPB(0),
-			.ngpio	= EXYNOS4_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC0(0),
-			.ngpio	= EXYNOS4_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPC1(0),
-			.ngpio	= EXYNOS4_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD0(0),
-			.ngpio	= EXYNOS4_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPD1(0),
-			.ngpio	= EXYNOS4_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE0(0),
-			.ngpio	= EXYNOS4_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE1(0),
-			.ngpio	= EXYNOS4_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE2(0),
-			.ngpio	= EXYNOS4_GPIO_E2_NR,
-			.label	= "GPE2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE3(0),
-			.ngpio	= EXYNOS4_GPIO_E3_NR,
-			.label	= "GPE3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPE4(0),
-			.ngpio	= EXYNOS4_GPIO_E4_NR,
-			.label	= "GPE4",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF0(0),
-			.ngpio	= EXYNOS4_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF1(0),
-			.ngpio	= EXYNOS4_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF2(0),
-			.ngpio	= EXYNOS4_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPF3(0),
-			.ngpio	= EXYNOS4_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPJ0(0),
-			.ngpio	= EXYNOS4_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPJ1(0),
-			.ngpio	= EXYNOS4_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK0(0),
-			.ngpio	= EXYNOS4_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK1(0),
-			.ngpio	= EXYNOS4_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK2(0),
-			.ngpio	= EXYNOS4_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPK3(0),
-			.ngpio	= EXYNOS4_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL0(0),
-			.ngpio	= EXYNOS4_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL1(0),
-			.ngpio	= EXYNOS4_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.chip	= {
-			.base	= EXYNOS4_GPL2(0),
-			.ngpio	= EXYNOS4_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY0(0),
-			.ngpio	= EXYNOS4_GPIO_Y0_NR,
-			.label	= "GPY0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY1(0),
-			.ngpio	= EXYNOS4_GPIO_Y1_NR,
-			.label	= "GPY1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY2(0),
-			.ngpio	= EXYNOS4_GPIO_Y2_NR,
-			.label	= "GPY2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY3(0),
-			.ngpio	= EXYNOS4_GPIO_Y3_NR,
-			.label	= "GPY3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY4(0),
-			.ngpio	= EXYNOS4_GPIO_Y4_NR,
-			.label	= "GPY4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY5(0),
-			.ngpio	= EXYNOS4_GPIO_Y5_NR,
-			.label	= "GPY5",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= EXYNOS4_GPY6(0),
-			.ngpio	= EXYNOS4_GPIO_Y6_NR,
-			.label	= "GPY6",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= EXYNOS4_GPX0(0),
-			.ngpio	= EXYNOS4_GPIO_X0_NR,
-			.label	= "GPX0",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= EXYNOS4_GPX1(0),
-			.ngpio	= EXYNOS4_GPIO_X1_NR,
-			.label	= "GPX1",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= EXYNOS4_GPX2(0),
-			.ngpio	= EXYNOS4_GPIO_X2_NR,
-			.label	= "GPX2",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO2 + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= EXYNOS4_GPX3(0),
-			.ngpio	= EXYNOS4_GPIO_X3_NR,
-			.label	= "GPX3",
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
-	{
-		.chip	= {
-			.base	= EXYNOS4_GPZ(0),
-			.ngpio	= EXYNOS4_GPIO_Z_NR,
-			.label	= "GPZ",
-		},
-	},
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip;
-	int i;
-	int group = 0;
-	int nr_chips;
-
-	/* GPIO part 1 */
-
-	chip = exynos4_gpio_part1_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO1 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
-	/* GPIO part 2 */
-
-	chip = exynos4_gpio_part2_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO2 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
-	/* GPIO part 3 */
-
-	chip = exynos4_gpio_part3_4bit;
-	nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			/* Assign the GPIO interrupt group */
-			chip->group = group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5P_VA_GPIO3 + (i) * 0x20;
-	}
-
-	samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
-	s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
-	return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/drivers/gpio/gpio-ks8695.c b/drivers/gpio/gpio-ks8695.c
new file mode 100644
index 000000000000..a3ac66ea364b
--- /dev/null
+++ b/drivers/gpio/gpio-ks8695.c
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-ks8695/gpio.c
+ *
+ * Copyright (C) 2006 Andrew Victor
+ * Updated to GPIOLIB, Copyright 2008 Simtec Electronics
+ *                     Daniel Silverstone <dsilvers@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-ks8695.h>
+
+/*
+ * Configure a GPIO line for either GPIO function, or its internal
+ * function (Interrupt, Timer, etc).
+ */
+static void ks8695_gpio_mode(unsigned int pin, short gpio)
+{
+	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_5)	/* only GPIO 0..5 have internal functions */
+		return;
+
+	local_irq_save(flags);
+
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+	if (gpio)			/* GPIO: set bit to 0 */
+		x &= ~enable[pin];
+	else				/* Internal function: set bit to 1 */
+		x |= enable[pin];
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPC);
+
+	local_irq_restore(flags);
+}
+
+
+static unsigned short gpio_irq[] = { KS8695_IRQ_EXTERN0, KS8695_IRQ_EXTERN1, KS8695_IRQ_EXTERN2, KS8695_IRQ_EXTERN3 };
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int ks8695_gpio_interrupt(unsigned int pin, unsigned int type)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	/* set pin as input */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x &= ~IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	/* Set IRQ triggering type */
+	irq_set_irq_type(gpio_irq[pin], type);
+
+	/* enable interrupt mode */
+	ks8695_gpio_mode(pin, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(ks8695_gpio_interrupt);
+
+
+
+/* .... Generic GPIO interface .............................................. */
+
+/*
+ * Configure the GPIO line as an input.
+ */
+static int ks8695_gpio_direction_input(struct gpio_chip *gc, unsigned int pin)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	/* set pin to GPIO mode */
+	ks8695_gpio_mode(pin, 1);
+
+	local_irq_save(flags);
+
+	/* set pin as input */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x &= ~IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+static int ks8695_gpio_direction_output(struct gpio_chip *gc,
+					unsigned int pin, int state)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	/* set pin to GPIO mode */
+	ks8695_gpio_mode(pin, 1);
+
+	local_irq_save(flags);
+
+	/* set line state */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	if (state)
+		x |= IOPD(pin);
+	else
+		x &= ~IOPD(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+	/* set pin as output */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	x |= IOPM(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPM);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ * Set the state of an output GPIO line.
+ */
+static void ks8695_gpio_set_value(struct gpio_chip *gc,
+				  unsigned int pin, int state)
+{
+	unsigned long x, flags;
+
+	if (pin > KS8695_GPIO_15)
+		return;
+
+	local_irq_save(flags);
+
+	/* set output line state */
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	if (state)
+		x |= IOPD(pin);
+	else
+		x &= ~IOPD(pin);
+	__raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD);
+
+	local_irq_restore(flags);
+}
+
+
+/*
+ * Read the state of a GPIO line.
+ */
+static int ks8695_gpio_get_value(struct gpio_chip *gc, unsigned int pin)
+{
+	unsigned long x;
+
+	if (pin > KS8695_GPIO_15)
+		return -EINVAL;
+
+	x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+	return (x & IOPD(pin)) != 0;
+}
+
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+static int ks8695_gpio_to_irq(struct gpio_chip *gc, unsigned int pin)
+{
+	if (pin > KS8695_GPIO_3)	/* only GPIO 0..3 can generate IRQ */
+		return -EINVAL;
+
+	return gpio_irq[pin];
+}
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq)
+{
+	if ((irq < KS8695_IRQ_EXTERN0) || (irq > KS8695_IRQ_EXTERN3))
+		return -EINVAL;
+
+	return (irq - KS8695_IRQ_EXTERN0);
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+/* GPIOLIB interface */
+
+static struct gpio_chip ks8695_gpio_chip = {
+	.label			= "KS8695",
+	.direction_input	= ks8695_gpio_direction_input,
+	.direction_output	= ks8695_gpio_direction_output,
+	.get			= ks8695_gpio_get_value,
+	.set			= ks8695_gpio_set_value,
+	.to_irq			= ks8695_gpio_to_irq,
+	.base			= 0,
+	.ngpio			= 16,
+	.can_sleep		= 0,
+};
+
+/* Register the GPIOs */
+void ks8695_register_gpios(void)
+{
+	if (gpiochip_add(&ks8695_gpio_chip))
+		printk(KERN_ERR "Unable to register core GPIOs\n");
+}
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+	unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+	unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+	unsigned long mode, ctrl, data;
+	int i;
+
+	mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+	data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+	seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+	for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+		seq_printf(s, "%i:\t", i);
+
+		seq_printf(s, "%s\t", (mode & IOPM(i)) ? "Output" : "Input");
+
+		if (i <= KS8695_GPIO_3) {
+			if (ctrl & enable[i]) {
+				seq_printf(s, "EXT%i ", i);
+
+				switch ((ctrl & intmask[i]) >> (4 * i)) {
+					case IOPC_TM_LOW:
+						seq_printf(s, "(Low)");		break;
+					case IOPC_TM_HIGH:
+						seq_printf(s, "(High)");	break;
+					case IOPC_TM_RISING:
+						seq_printf(s, "(Rising)");	break;
+					case IOPC_TM_FALLING:
+						seq_printf(s, "(Falling)");	break;
+					case IOPC_TM_EDGE:
+						seq_printf(s, "(Edges)");	break;
+				}
+			}
+			else
+				seq_printf(s, "GPIO\t");
+		}
+		else if (i <= KS8695_GPIO_5) {
+			if (ctrl & enable[i])
+				seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+			else
+				seq_printf(s, "GPIO\t");
+		}
+		else
+			seq_printf(s, "GPIO\t");
+
+		seq_printf(s, "\t");
+
+		seq_printf(s, "%i\n", (data & IOPD(i)) ? 1 : 0);
+	}
+	return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+	.open		= ks8695_gpio_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+	/* /sys/kernel/debug/ks8695_gpio */
+	(void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+	return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif
diff --git a/drivers/gpio/gpio-langwell.c b/drivers/gpio/gpio-langwell.c
index d2eb57c60e0e..00692e89ef87 100644
--- a/drivers/gpio/gpio-langwell.c
+++ b/drivers/gpio/gpio-langwell.c
@@ -59,6 +59,7 @@ enum GPIO_REG {
 	GRER,		/* rising edge detect */
 	GFER,		/* falling edge detect */
 	GEDR,		/* edge detect result */
+	GAFR,		/* alt function */
 };
 
 struct lnw_gpio {
@@ -81,6 +82,31 @@ static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
 	return ptr;
 }
 
+static void __iomem *gpio_reg_2bit(struct gpio_chip *chip, unsigned offset,
+				   enum GPIO_REG reg_type)
+{
+	struct lnw_gpio *lnw = container_of(chip, struct lnw_gpio, chip);
+	unsigned nreg = chip->ngpio / 32;
+	u8 reg = offset / 16;
+	void __iomem *ptr;
+
+	ptr = (void __iomem *)(lnw->reg_base + reg_type * nreg * 4 + reg * 4);
+	return ptr;
+}
+
+static int lnw_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *gafr = gpio_reg_2bit(chip, offset, GAFR);
+	u32 value = readl(gafr);
+	int shift = (offset % 16) << 1, af = (value >> shift) & 3;
+
+	if (af) {
+		value &= ~(3 << shift);
+		writel(value, gafr);
+	}
+	return 0;
+}
+
 static int lnw_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	void __iomem *gplr = gpio_reg(chip, offset, GPLR);
@@ -321,6 +347,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev,
 	lnw->reg_base = base;
 	lnw->irq_base = irq_base;
 	lnw->chip.label = dev_name(&pdev->dev);
+	lnw->chip.request = lnw_gpio_request;
 	lnw->chip.direction_input = lnw_gpio_direction_input;
 	lnw->chip.direction_output = lnw_gpio_direction_output;
 	lnw->chip.get = lnw_gpio_get;
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
new file mode 100644
index 000000000000..5b6948081f8f
--- /dev/null
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -0,0 +1,446 @@
+/*
+ * arch/arm/mach-lpc32xx/gpiolib.c
+ *
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
+
+#define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
+#define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
+#define LPC32XX_GPIO_P3_OUTP_CLR		_GPREG(0x008)
+#define LPC32XX_GPIO_P3_OUTP_STATE		_GPREG(0x00C)
+#define LPC32XX_GPIO_P2_DIR_SET			_GPREG(0x010)
+#define LPC32XX_GPIO_P2_DIR_CLR			_GPREG(0x014)
+#define LPC32XX_GPIO_P2_DIR_STATE		_GPREG(0x018)
+#define LPC32XX_GPIO_P2_INP_STATE		_GPREG(0x01C)
+#define LPC32XX_GPIO_P2_OUTP_SET		_GPREG(0x020)
+#define LPC32XX_GPIO_P2_OUTP_CLR		_GPREG(0x024)
+#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
+#define LPC32XX_GPIO_P0_INP_STATE		_GPREG(0x040)
+#define LPC32XX_GPIO_P0_OUTP_SET		_GPREG(0x044)
+#define LPC32XX_GPIO_P0_OUTP_CLR		_GPREG(0x048)
+#define LPC32XX_GPIO_P0_OUTP_STATE		_GPREG(0x04C)
+#define LPC32XX_GPIO_P0_DIR_SET			_GPREG(0x050)
+#define LPC32XX_GPIO_P0_DIR_CLR			_GPREG(0x054)
+#define LPC32XX_GPIO_P0_DIR_STATE		_GPREG(0x058)
+#define LPC32XX_GPIO_P1_INP_STATE		_GPREG(0x060)
+#define LPC32XX_GPIO_P1_OUTP_SET		_GPREG(0x064)
+#define LPC32XX_GPIO_P1_OUTP_CLR		_GPREG(0x068)
+#define LPC32XX_GPIO_P1_OUTP_STATE		_GPREG(0x06C)
+#define LPC32XX_GPIO_P1_DIR_SET			_GPREG(0x070)
+#define LPC32XX_GPIO_P1_DIR_CLR			_GPREG(0x074)
+#define LPC32XX_GPIO_P1_DIR_STATE		_GPREG(0x078)
+
+#define GPIO012_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO3_PIN_TO_BIT(x)			(1 << ((x) + 25))
+#define GPO3_PIN_TO_BIT(x)			(1 << (x))
+#define GPIO012_PIN_IN_SEL(x, y)		(((x) >> (y)) & 1)
+#define GPIO3_PIN_IN_SHIFT(x)			((x) == 5 ? 24 : 10 + (x))
+#define GPIO3_PIN_IN_SEL(x, y)			((x) >> GPIO3_PIN_IN_SHIFT(y))
+#define GPIO3_PIN5_IN_SEL(x)			(((x) >> 24) & 1)
+#define GPI3_PIN_IN_SEL(x, y)			(((x) >> (y)) & 1)
+
+struct gpio_regs {
+	void __iomem *inp_state;
+	void __iomem *outp_set;
+	void __iomem *outp_clr;
+	void __iomem *dir_set;
+	void __iomem *dir_clr;
+};
+
+/*
+ * GPIO names
+ */
+static const char *gpio_p0_names[LPC32XX_GPIO_P0_MAX] = {
+	"p0.0", "p0.1", "p0.2", "p0.3",
+	"p0.4", "p0.5", "p0.6", "p0.7"
+};
+
+static const char *gpio_p1_names[LPC32XX_GPIO_P1_MAX] = {
+	"p1.0", "p1.1", "p1.2", "p1.3",
+	"p1.4", "p1.5", "p1.6", "p1.7",
+	"p1.8", "p1.9", "p1.10", "p1.11",
+	"p1.12", "p1.13", "p1.14", "p1.15",
+	"p1.16", "p1.17", "p1.18", "p1.19",
+	"p1.20", "p1.21", "p1.22", "p1.23",
+};
+
+static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = {
+	"p2.0", "p2.1", "p2.2", "p2.3",
+	"p2.4", "p2.5", "p2.6", "p2.7",
+	"p2.8", "p2.9", "p2.10", "p2.11",
+	"p2.12"
+};
+
+static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = {
+	"gpi000", "gpio01", "gpio02", "gpio03",
+	"gpio04", "gpio05"
+};
+
+static const char *gpi_p3_names[LPC32XX_GPI_P3_MAX] = {
+	"gpi00", "gpi01", "gpi02", "gpi03",
+	"gpi04", "gpi05", "gpi06", "gpi07",
+	"gpi08", "gpi09",  NULL,    NULL,
+	 NULL,    NULL,    NULL,   "gpi15",
+	"gpi16", "gpi17", "gpi18", "gpi19",
+	"gpi20", "gpi21", "gpi22", "gpi23",
+	"gpi24", "gpi25", "gpi26", "gpi27"
+};
+
+static const char *gpo_p3_names[LPC32XX_GPO_P3_MAX] = {
+	"gpo00", "gpo01", "gpo02", "gpo03",
+	"gpo04", "gpo05", "gpo06", "gpo07",
+	"gpo08", "gpo09", "gpo10", "gpo11",
+	"gpo12", "gpo13", "gpo14", "gpo15",
+	"gpo16", "gpo17", "gpo18", "gpo19",
+	"gpo20", "gpo21", "gpo22", "gpo23"
+};
+
+static struct gpio_regs gpio_grp_regs_p0 = {
+	.inp_state	= LPC32XX_GPIO_P0_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P0_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P0_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P0_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P0_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p1 = {
+	.inp_state	= LPC32XX_GPIO_P1_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P1_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P1_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P1_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P1_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p2 = {
+	.inp_state	= LPC32XX_GPIO_P2_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P2_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P2_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+static struct gpio_regs gpio_grp_regs_p3 = {
+	.inp_state	= LPC32XX_GPIO_P3_INP_STATE,
+	.outp_set	= LPC32XX_GPIO_P3_OUTP_SET,
+	.outp_clr	= LPC32XX_GPIO_P3_OUTP_CLR,
+	.dir_set	= LPC32XX_GPIO_P2_DIR_SET,
+	.dir_clr	= LPC32XX_GPIO_P2_DIR_CLR,
+};
+
+struct lpc32xx_gpio_chip {
+	struct gpio_chip	chip;
+	struct gpio_regs	*gpio_grp;
+};
+
+static inline struct lpc32xx_gpio_chip *to_lpc32xx_gpio(
+	struct gpio_chip *gpc)
+{
+	return container_of(gpc, struct lpc32xx_gpio_chip, chip);
+}
+
+static void __set_gpio_dir_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	if (input)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_clr);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_dir_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int input)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (input)
+		__raw_writel(u, group->gpio_grp->dir_clr);
+	else
+		__raw_writel(u, group->gpio_grp->dir_set);
+}
+
+static void __set_gpio_level_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPIO012_PIN_TO_BIT(pin),
+			group->gpio_grp->outp_clr);
+}
+
+static void __set_gpio_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	u32 u = GPIO3_PIN_TO_BIT(pin);
+
+	if (high)
+		__raw_writel(u, group->gpio_grp->outp_set);
+	else
+		__raw_writel(u, group->gpio_grp->outp_clr);
+}
+
+static void __set_gpo_level_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin, int high)
+{
+	if (high)
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_set);
+	else
+		__raw_writel(GPO3_PIN_TO_BIT(pin), group->gpio_grp->outp_clr);
+}
+
+static int __get_gpio_state_p012(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPIO012_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state),
+		pin);
+}
+
+static int __get_gpio_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	int state = __raw_readl(group->gpio_grp->inp_state);
+
+	/*
+	 * P3 GPIO pin input mapping is not contiguous, GPIOP3-0..4 is mapped
+	 * to bits 10..14, while GPIOP3-5 is mapped to bit 24.
+	 */
+	return GPIO3_PIN_IN_SEL(state, pin);
+}
+
+static int __get_gpi_state_p3(struct lpc32xx_gpio_chip *group,
+	unsigned pin)
+{
+	return GPI3_PIN_IN_SEL(__raw_readl(group->gpio_grp->inp_state), pin);
+}
+
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_input_p3(struct gpio_chip *chip,
+	unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 1);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_in_always(struct gpio_chip *chip,
+	unsigned pin)
+{
+	return 0;
+}
+
+static int lpc32xx_gpio_get_value_p012(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p012(group, pin);
+}
+
+static int lpc32xx_gpio_get_value_p3(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpio_state_p3(group, pin);
+}
+
+static int lpc32xx_gpi_get_value(struct gpio_chip *chip, unsigned pin)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	return __get_gpi_state_p3(group, pin);
+}
+
+static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p012(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_dir_p3(group, pin, 0);
+
+	return 0;
+}
+
+static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	return 0;
+}
+
+static void lpc32xx_gpio_set_value_p012(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p012(group, pin, value);
+}
+
+static void lpc32xx_gpio_set_value_p3(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpio_level_p3(group, pin, value);
+}
+
+static void lpc32xx_gpo_set_value(struct gpio_chip *chip, unsigned pin,
+	int value)
+{
+	struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+	__set_gpo_level_p3(group, pin, value);
+}
+
+static int lpc32xx_gpio_request(struct gpio_chip *chip, unsigned pin)
+{
+	if (pin < chip->ngpio)
+		return 0;
+
+	return -EINVAL;
+}
+
+static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
+	{
+		.chip = {
+			.label			= "gpio_p0",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P0_GRP,
+			.ngpio			= LPC32XX_GPIO_P0_MAX,
+			.names			= gpio_p0_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p0,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p1",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P1_GRP,
+			.ngpio			= LPC32XX_GPIO_P1_MAX,
+			.names			= gpio_p1_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p1,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p2",
+			.direction_input	= lpc32xx_gpio_dir_input_p012,
+			.get			= lpc32xx_gpio_get_value_p012,
+			.direction_output	= lpc32xx_gpio_dir_output_p012,
+			.set			= lpc32xx_gpio_set_value_p012,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P2_GRP,
+			.ngpio			= LPC32XX_GPIO_P2_MAX,
+			.names			= gpio_p2_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p2,
+	},
+	{
+		.chip = {
+			.label			= "gpio_p3",
+			.direction_input	= lpc32xx_gpio_dir_input_p3,
+			.get			= lpc32xx_gpio_get_value_p3,
+			.direction_output	= lpc32xx_gpio_dir_output_p3,
+			.set			= lpc32xx_gpio_set_value_p3,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPIO_P3_GRP,
+			.ngpio			= LPC32XX_GPIO_P3_MAX,
+			.names			= gpio_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpi_p3",
+			.direction_input	= lpc32xx_gpio_dir_in_always,
+			.get			= lpc32xx_gpi_get_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPI_P3_GRP,
+			.ngpio			= LPC32XX_GPI_P3_MAX,
+			.names			= gpi_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+	{
+		.chip = {
+			.label			= "gpo_p3",
+			.direction_output	= lpc32xx_gpio_dir_out_always,
+			.set			= lpc32xx_gpo_set_value,
+			.request		= lpc32xx_gpio_request,
+			.base			= LPC32XX_GPO_P3_GRP,
+			.ngpio			= LPC32XX_GPO_P3_MAX,
+			.names			= gpo_p3_names,
+			.can_sleep		= 0,
+		},
+		.gpio_grp = &gpio_grp_regs_p3,
+	},
+};
+
+void __init lpc32xx_gpio_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lpc32xx_gpiochip); i++)
+		gpiochip_add(&lpc32xx_gpiochip[i].chip);
+}
diff --git a/drivers/gpio/gpio-mc33880.c b/drivers/gpio/gpio-mc33880.c
index b3b4652e89ec..2de57ce5feb6 100644
--- a/drivers/gpio/gpio-mc33880.c
+++ b/drivers/gpio/gpio-mc33880.c
@@ -26,6 +26,7 @@
 #include <linux/spi/mc33880.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/module.h>
 
 #define DRIVER_NAME "mc33880"
 
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 1ef46e6c2a2a..c5d83a8a91c2 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -5,6 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index a9016f56ed7e..ea8e73869250 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -14,10 +14,22 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#define IOH_EDGE_FALLING	0
+#define IOH_EDGE_RISING		BIT(0)
+#define IOH_LEVEL_L		BIT(1)
+#define IOH_LEVEL_H		(BIT(0) | BIT(1))
+#define IOH_EDGE_BOTH		BIT(2)
+#define IOH_IM_MASK		(BIT(0) | BIT(1) | BIT(2))
+
+#define IOH_IRQ_BASE		0
 
 #define PCI_VENDOR_ID_ROHM             0x10DB
 
@@ -46,12 +58,22 @@ struct ioh_regs {
 
 /**
  * struct ioh_gpio_reg_data - The register store data.
+ * @ien_reg	To store contents of interrupt enable register.
+ * @imask_reg:	To store contents of interrupt mask regist
  * @po_reg:	To store contents of PO register.
  * @pm_reg:	To store contents of PM register.
+ * @im0_reg:	To store contents of interrupt mode regist0
+ * @im1_reg:	To store contents of interrupt mode regist1
+ * @use_sel_reg: To store contents of GPIO_USE_SEL0~3
  */
 struct ioh_gpio_reg_data {
+	u32 ien_reg;
+	u32 imask_reg;
 	u32 po_reg;
 	u32 pm_reg;
+	u32 im0_reg;
+	u32 im1_reg;
+	u32 use_sel_reg;
 };
 
 /**
@@ -62,7 +84,11 @@ struct ioh_gpio_reg_data {
  * @gpio:			Data for GPIO infrastructure.
  * @ioh_gpio_reg:		Memory mapped Register data is saved here
  *				when suspend.
+ * @gpio_use_sel:		Save GPIO_USE_SEL1~4 register for PM
  * @ch:				Indicate GPIO channel
+ * @irq_base:		Save base of IRQ number for interrupt
+ * @spinlock:		Used for register access protection in
+ *				interrupt context ioh_irq_type and PM;
  */
 struct ioh_gpio {
 	void __iomem *base;
@@ -70,8 +96,11 @@ struct ioh_gpio {
 	struct device *dev;
 	struct gpio_chip gpio;
 	struct ioh_gpio_reg_data ioh_gpio_reg;
+	u32 gpio_use_sel;
 	struct mutex lock;
 	int ch;
+	int irq_base;
+	spinlock_t spinlock;
 };
 
 static const int num_ports[] = {6, 12, 16, 16, 15, 16, 16, 12};
@@ -145,8 +174,25 @@ static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
  */
 static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
 {
-	chip->ioh_gpio_reg.po_reg = ioread32(&chip->reg->regs[chip->ch].po);
-	chip->ioh_gpio_reg.pm_reg = ioread32(&chip->reg->regs[chip->ch].pm);
+	int i;
+
+	for (i = 0; i < 8; i ++, chip++) {
+		chip->ioh_gpio_reg.po_reg =
+					ioread32(&chip->reg->regs[chip->ch].po);
+		chip->ioh_gpio_reg.pm_reg =
+					ioread32(&chip->reg->regs[chip->ch].pm);
+		chip->ioh_gpio_reg.ien_reg =
+				       ioread32(&chip->reg->regs[chip->ch].ien);
+		chip->ioh_gpio_reg.imask_reg =
+				     ioread32(&chip->reg->regs[chip->ch].imask);
+		chip->ioh_gpio_reg.im0_reg =
+				      ioread32(&chip->reg->regs[chip->ch].im_0);
+		chip->ioh_gpio_reg.im1_reg =
+				      ioread32(&chip->reg->regs[chip->ch].im_1);
+		if (i < 4)
+			chip->ioh_gpio_reg.use_sel_reg =
+					   ioread32(&chip->reg->ioh_sel_reg[i]);
+	}
 }
 
 /*
@@ -154,13 +200,34 @@ static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
  */
 static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
 {
-	/* to store contents of PO register */
-	iowrite32(chip->ioh_gpio_reg.po_reg, &chip->reg->regs[chip->ch].po);
-	/* to store contents of PM register */
-	iowrite32(chip->ioh_gpio_reg.pm_reg, &chip->reg->regs[chip->ch].pm);
+	int i;
+
+	for (i = 0; i < 8; i ++, chip++) {
+		iowrite32(chip->ioh_gpio_reg.po_reg,
+			  &chip->reg->regs[chip->ch].po);
+		iowrite32(chip->ioh_gpio_reg.pm_reg,
+			  &chip->reg->regs[chip->ch].pm);
+		iowrite32(chip->ioh_gpio_reg.ien_reg,
+			  &chip->reg->regs[chip->ch].ien);
+		iowrite32(chip->ioh_gpio_reg.imask_reg,
+			  &chip->reg->regs[chip->ch].imask);
+		iowrite32(chip->ioh_gpio_reg.im0_reg,
+			  &chip->reg->regs[chip->ch].im_0);
+		iowrite32(chip->ioh_gpio_reg.im1_reg,
+			  &chip->reg->regs[chip->ch].im_1);
+		if (i < 4)
+			iowrite32(chip->ioh_gpio_reg.use_sel_reg,
+				  &chip->reg->ioh_sel_reg[i]);
+	}
 }
 #endif
 
+static int ioh_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+	struct ioh_gpio *chip = container_of(gpio, struct ioh_gpio, gpio);
+	return chip->irq_base + offset;
+}
+
 static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
 {
 	struct gpio_chip *gpio = &chip->gpio;
@@ -175,16 +242,148 @@ static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
 	gpio->base = -1;
 	gpio->ngpio = num_port;
 	gpio->can_sleep = 0;
+	gpio->to_irq = ioh_gpio_to_irq;
+}
+
+static int ioh_irq_type(struct irq_data *d, unsigned int type)
+{
+	u32 im;
+	u32 *im_reg;
+	u32 ien;
+	u32 im_pos;
+	int ch;
+	unsigned long flags;
+	u32 val;
+	int irq = d->irq;
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+
+	ch = irq - chip->irq_base;
+	if (irq <= chip->irq_base + 7) {
+		im_reg = &chip->reg->regs[chip->ch].im_0;
+		im_pos = ch;
+	} else {
+		im_reg = &chip->reg->regs[chip->ch].im_1;
+		im_pos = ch - 8;
+	}
+	dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d type=%d\n",
+		__func__, irq, type, ch, im_pos, type);
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		val = IOH_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		val = IOH_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = IOH_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		val = IOH_LEVEL_H;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		val = IOH_LEVEL_L;
+		break;
+	case IRQ_TYPE_PROBE:
+		goto end;
+	default:
+		dev_warn(chip->dev, "%s: unknown type(%dd)",
+			__func__, type);
+		goto end;
+	}
+
+	/* Set interrupt mode */
+	im = ioread32(im_reg) & ~(IOH_IM_MASK << (im_pos * 4));
+	iowrite32(im | (val << (im_pos * 4)), im_reg);
+
+	/* iclr */
+	iowrite32(BIT(ch), &chip->reg->regs[chip->ch].iclr);
+
+	/* IMASKCLR */
+	iowrite32(BIT(ch), &chip->reg->regs[chip->ch].imaskclr);
+
+	/* Enable interrupt */
+	ien = ioread32(&chip->reg->regs[chip->ch].ien);
+	iowrite32(ien | BIT(ch), &chip->reg->regs[chip->ch].ien);
+end:
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+static void ioh_irq_unmask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+
+	iowrite32(1 << (d->irq - chip->irq_base),
+		  &chip->reg->regs[chip->ch].imaskclr);
+}
+
+static void ioh_irq_mask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+
+	iowrite32(1 << (d->irq - chip->irq_base),
+		  &chip->reg->regs[chip->ch].imask);
+}
+
+static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
+{
+	struct ioh_gpio *chip = dev_id;
+	u32 reg_val;
+	int i, j;
+	int ret = IRQ_NONE;
+
+	for (i = 0; i < 8; i++) {
+		reg_val = ioread32(&chip->reg->regs[i].istatus);
+		for (j = 0; j < num_ports[i]; j++) {
+			if (reg_val & BIT(j)) {
+				dev_dbg(chip->dev,
+					"%s:[%d]:irq=%d status=0x%x\n",
+					__func__, j, irq, reg_val);
+				iowrite32(BIT(j),
+					  &chip->reg->regs[chip->ch].iclr);
+				generic_handle_irq(chip->irq_base + j);
+				ret = IRQ_HANDLED;
+			}
+		}
+	}
+	return ret;
+}
+
+static __devinit void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip,
+				unsigned int irq_start, unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("ioh_gpio", 1, irq_start, chip->base,
+				    handle_simple_irq);
+	gc->private = chip;
+	ct = gc->chip_types;
+
+	ct->chip.irq_mask = ioh_irq_mask;
+	ct->chip.irq_unmask = ioh_irq_unmask;
+	ct->chip.irq_set_type = ioh_irq_type;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 }
 
 static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
 				    const struct pci_device_id *id)
 {
 	int ret;
-	int i;
+	int i, j;
 	struct ioh_gpio *chip;
 	void __iomem *base;
 	void __iomem *chip_save;
+	int irq_base;
 
 	ret = pci_enable_device(pdev);
 	if (ret) {
@@ -228,10 +427,41 @@ static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
 	}
 
 	chip = chip_save;
+	for (j = 0; j < 8; j++, chip++) {
+		irq_base = irq_alloc_descs(-1, IOH_IRQ_BASE, num_ports[j],
+					   NUMA_NO_NODE);
+		if (irq_base < 0) {
+			dev_warn(&pdev->dev,
+				"ml_ioh_gpio: Failed to get IRQ base num\n");
+			chip->irq_base = -1;
+			goto err_irq_alloc_descs;
+		}
+		chip->irq_base = irq_base;
+		ioh_gpio_alloc_generic_chip(chip, irq_base, num_ports[j]);
+	}
+
+	chip = chip_save;
+	ret = request_irq(pdev->irq, ioh_gpio_handler,
+			     IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"%s request_irq failed\n", __func__);
+		goto err_request_irq;
+	}
+
 	pci_set_drvdata(pdev, chip);
 
 	return 0;
 
+err_request_irq:
+	chip = chip_save;
+err_irq_alloc_descs:
+	while (--j >= 0) {
+		chip--;
+		irq_free_descs(chip->irq_base, num_ports[j]);
+	}
+
+	chip = chip_save;
 err_gpiochip_add:
 	while (--i >= 0) {
 		chip--;
@@ -264,7 +494,11 @@ static void __devexit ioh_gpio_remove(struct pci_dev *pdev)
 	void __iomem *chip_save;
 
 	chip_save = chip;
+
+	free_irq(pdev->irq, chip);
+
 	for (i = 0; i < 8; i++, chip++) {
+		irq_free_descs(chip->irq_base, num_ports[i]);
 		err = gpiochip_remove(&chip->gpio);
 		if (err)
 			dev_err(&pdev->dev, "Failed gpiochip_remove\n");
@@ -282,9 +516,11 @@ static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	s32 ret;
 	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
 
+	spin_lock_irqsave(&chip->spinlock, flags);
 	ioh_gpio_save_reg_conf(chip);
-	ioh_gpio_restore_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	ret = pci_save_state(pdev);
 	if (ret) {
@@ -304,6 +540,7 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
 {
 	s32 ret;
 	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
 
 	ret = pci_enable_wake(pdev, PCI_D0, 0);
 
@@ -315,9 +552,11 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
 	}
 	pci_restore_state(pdev);
 
+	spin_lock_irqsave(&chip->spinlock, flags);
 	iowrite32(0x01, &chip->reg->srst);
 	iowrite32(0x00, &chip->reg->srst);
 	ioh_gpio_restore_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	return 0;
 }
diff --git a/drivers/gpio/gpio-mpc5200.c b/drivers/gpio/gpio-mpc5200.c
index 52d3ed208105..2c7cef367fc0 100644
--- a/drivers/gpio/gpio-mpc5200.c
+++ b/drivers/gpio/gpio-mpc5200.c
@@ -23,6 +23,7 @@
 #include <linux/of_gpio.h>
 #include <linux/io.h>
 #include <linux/of_platform.h>
+#include <linux/module.h>
 
 #include <asm/gpio.h>
 #include <asm/mpc52xx.h>
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
new file mode 100644
index 000000000000..ec3fcf0a7e12
--- /dev/null
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -0,0 +1,398 @@
+/*
+ * GPIOs on MPC512x/8349/8572/8610 and compatible
+ *
+ * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+
+#define MPC8XXX_GPIO_PINS	32
+
+#define GPIO_DIR		0x00
+#define GPIO_ODR		0x04
+#define GPIO_DAT		0x08
+#define GPIO_IER		0x0c
+#define GPIO_IMR		0x10
+#define GPIO_ICR		0x14
+#define GPIO_ICR2		0x18
+
+struct mpc8xxx_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/*
+	 * shadowed data register to be able to clear/set output pins in
+	 * open drain mode safely
+	 */
+	u32 data;
+	struct irq_host *irq;
+	void *of_dev_id_data;
+};
+
+static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
+{
+	return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
+}
+
+static inline struct mpc8xxx_gpio_chip *
+to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
+{
+	return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
+}
+
+static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+	mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
+}
+
+/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
+ * defined as output cannot be determined by reading GPDAT register,
+ * so we use shadow data register instead. The status of input pins
+ * is determined by reading GPDAT register.
+ */
+static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	u32 val;
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+	val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
+
+	return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
+}
+
+static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+
+	return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
+}
+
+static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	if (val)
+		mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio);
+	else
+		mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
+
+	out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+	return 0;
+}
+
+static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+	unsigned long flags;
+
+	mpc8xxx_gpio_set(gc, gpio, val);
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+
+	return 0;
+}
+
+static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+
+	if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
+		return irq_create_mapping(mpc8xxx_gc->irq, offset);
+	else
+		return -ENXIO;
+}
+
+static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned int mask;
+
+	mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
+	if (mask)
+		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
+						     32 - ffs(mask)));
+	chip->irq_eoi(&desc->irq_data);
+}
+
+static void mpc8xxx_irq_unmask(struct irq_data *d)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_mask(struct irq_data *d)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+	clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+
+	spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
+static void mpc8xxx_irq_ack(struct irq_data *d)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+
+	out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+}
+
+static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long flags;
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_FALLING:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		setbits32(mm->regs + GPIO_ICR,
+			  mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrbits32(mm->regs + GPIO_ICR,
+			  mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
+	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
+	unsigned long gpio = irqd_to_hwirq(d);
+	void __iomem *reg;
+	unsigned int shift;
+	unsigned long flags;
+
+	if (gpio < 16) {
+		reg = mm->regs + GPIO_ICR;
+		shift = (15 - gpio) * 2;
+	} else {
+		reg = mm->regs + GPIO_ICR2;
+		shift = (15 - (gpio % 16)) * 2;
+	}
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrsetbits_be32(reg, 3 << shift, 2 << shift);
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrsetbits_be32(reg, 3 << shift, 1 << shift);
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+		clrbits32(reg, 3 << shift);
+		spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct irq_chip mpc8xxx_irq_chip = {
+	.name		= "mpc8xxx-gpio",
+	.irq_unmask	= mpc8xxx_irq_unmask,
+	.irq_mask	= mpc8xxx_irq_mask,
+	.irq_ack	= mpc8xxx_irq_ack,
+	.irq_set_type	= mpc8xxx_irq_set_type,
+};
+
+static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data;
+
+	if (mpc8xxx_gc->of_dev_id_data)
+		mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data;
+
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int mpc8xxx_gpio_irq_xlate(struct irq_host *h, struct device_node *ct,
+				  const u32 *intspec, unsigned int intsize,
+				  irq_hw_number_t *out_hwirq,
+				  unsigned int *out_flags)
+
+{
+	/* interrupt sense values coming from the device tree equal either
+	 * EDGE_FALLING or EDGE_BOTH
+	 */
+	*out_hwirq = intspec[0];
+	*out_flags = intspec[1];
+
+	return 0;
+}
+
+static struct irq_host_ops mpc8xxx_gpio_irq_ops = {
+	.map	= mpc8xxx_gpio_irq_map,
+	.xlate	= mpc8xxx_gpio_irq_xlate,
+};
+
+static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
+	{ .compatible = "fsl,mpc8349-gpio", },
+	{ .compatible = "fsl,mpc8572-gpio", },
+	{ .compatible = "fsl,mpc8610-gpio", },
+	{ .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, },
+	{ .compatible = "fsl,pq3-gpio",     },
+	{ .compatible = "fsl,qoriq-gpio",   },
+	{}
+};
+
+static void __init mpc8xxx_add_controller(struct device_node *np)
+{
+	struct mpc8xxx_gpio_chip *mpc8xxx_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct gpio_chip *gc;
+	const struct of_device_id *id;
+	unsigned hwirq;
+	int ret;
+
+	mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
+	if (!mpc8xxx_gc) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	spin_lock_init(&mpc8xxx_gc->lock);
+
+	mm_gc = &mpc8xxx_gc->mm_gc;
+	gc = &mm_gc->gc;
+
+	mm_gc->save_regs = mpc8xxx_gpio_save_regs;
+	gc->ngpio = MPC8XXX_GPIO_PINS;
+	gc->direction_input = mpc8xxx_gpio_dir_in;
+	gc->direction_output = mpc8xxx_gpio_dir_out;
+	if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
+		gc->get = mpc8572_gpio_get;
+	else
+		gc->get = mpc8xxx_gpio_get;
+	gc->set = mpc8xxx_gpio_set;
+	gc->to_irq = mpc8xxx_gpio_to_irq;
+
+	ret = of_mm_gpiochip_add(np, mm_gc);
+	if (ret)
+		goto err;
+
+	hwirq = irq_of_parse_and_map(np, 0);
+	if (hwirq == NO_IRQ)
+		goto skip_irq;
+
+	mpc8xxx_gc->irq =
+		irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, MPC8XXX_GPIO_PINS,
+			       &mpc8xxx_gpio_irq_ops, MPC8XXX_GPIO_PINS);
+	if (!mpc8xxx_gc->irq)
+		goto skip_irq;
+
+	id = of_match_node(mpc8xxx_gpio_ids, np);
+	if (id)
+		mpc8xxx_gc->of_dev_id_data = id->data;
+
+	mpc8xxx_gc->irq->host_data = mpc8xxx_gc;
+
+	/* ack and mask all irqs */
+	out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
+	out_be32(mm_gc->regs + GPIO_IMR, 0);
+
+	irq_set_handler_data(hwirq, mpc8xxx_gc);
+	irq_set_chained_handler(hwirq, mpc8xxx_gpio_irq_cascade);
+
+skip_irq:
+	return;
+
+err:
+	pr_err("%s: registration failed with status %d\n",
+	       np->full_name, ret);
+	kfree(mpc8xxx_gc);
+
+	return;
+}
+
+static int __init mpc8xxx_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, mpc8xxx_gpio_ids)
+		mpc8xxx_add_controller(np);
+
+	return 0;
+}
+arch_initcall(mpc8xxx_add_gpiochips);
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 4340acae3bd3..e79147634573 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -29,7 +29,11 @@
 #include <linux/basic_mmio_gpio.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/module.h>
 #include <asm-generic/bug.h>
+#include <asm/mach/irq.h>
+
+#define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
 
 enum mxc_gpio_hwtype {
 	IMX1_GPIO,	/* runs on i.mx1 */
@@ -232,10 +236,15 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
 	u32 irq_stat;
 	struct mxc_gpio_port *port = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+
+	chained_irq_enter(chip, desc);
 
 	irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
 
 	mxc_gpio_irq_handler(port, irq_stat);
+
+	chained_irq_exit(chip, desc);
 }
 
 /* MX2 has one interrupt *for all* gpio ports */
@@ -337,6 +346,15 @@ static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
 	mxc_gpio_hwtype = hwtype;
 }
 
+static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct bgpio_chip *bgc = to_bgpio_chip(gc);
+	struct mxc_gpio_port *port =
+		container_of(bgc, struct mxc_gpio_port, bgc);
+
+	return port->virtual_irq_start + offset;
+}
+
 static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -403,6 +421,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto out_iounmap;
 
+	port->bgc.gc.to_irq = mxc_gpio_to_irq;
 	port->bgc.gc.base = pdev->id * 32;
 	port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir);
 	port->bgc.data = port->bgc.read_reg(port->bgc.reg_set);
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index af55a8577c2e..385c58e8405b 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -28,6 +28,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/basic_mmio_gpio.h>
+#include <linux/module.h>
 #include <mach/mxs.h>
 
 #define MXS_SET		0x4
@@ -49,6 +50,8 @@
 #define GPIO_INT_LEV_MASK	(1 << 0)
 #define GPIO_INT_POL_MASK	(1 << 1)
 
+#define irq_to_gpio(irq)	((irq) - MXS_GPIO_IRQ_START)
+
 struct mxs_gpio_port {
 	void __iomem *base;
 	int id;
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c732d76..1ebedfb6d46d 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -27,8 +27,9 @@
 #include <asm/mach/irq.h>
 
 #include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 /*
  * The GPIO module in the Nomadik family of Systems-on-Chip is an
@@ -58,7 +59,6 @@ struct nmk_gpio_chip {
 	u32 rwimsc;
 	u32 fwimsc;
 	u32 slpm;
-	u32 enabled;
 	u32 pull_up;
 };
 
@@ -276,6 +276,8 @@ static void nmk_gpio_glitch_slpm_init(unsigned int *slpm)
 		if (!chip)
 			break;
 
+		clk_enable(chip->clk);
+
 		slpm[i] = readl(chip->addr + NMK_GPIO_SLPC);
 		writel(temp, chip->addr + NMK_GPIO_SLPC);
 	}
@@ -292,6 +294,8 @@ static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm)
 			break;
 
 		writel(slpm[i], chip->addr + NMK_GPIO_SLPC);
+
+		clk_disable(chip->clk);
 	}
 }
 
@@ -336,10 +340,12 @@ static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
 			break;
 		}
 
+		clk_enable(nmk_chip->clk);
 		spin_lock(&nmk_chip->lock);
 		__nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base,
 				 cfgs[i], sleep, glitch ? slpm : NULL);
 		spin_unlock(&nmk_chip->lock);
+		clk_disable(nmk_chip->clk);
 	}
 
 	if (glitch)
@@ -424,6 +430,7 @@ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
 	if (!nmk_chip)
 		return -EINVAL;
 
+	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
 
@@ -431,6 +438,7 @@ int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
 
 	spin_unlock(&nmk_chip->lock);
 	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+	clk_disable(nmk_chip->clk);
 
 	return 0;
 }
@@ -457,9 +465,11 @@ int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull)
 	if (!nmk_chip)
 		return -EINVAL;
 
+	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 	__nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+	clk_disable(nmk_chip->clk);
 
 	return 0;
 }
@@ -483,9 +493,11 @@ int nmk_gpio_set_mode(int gpio, int gpio_mode)
 	if (!nmk_chip)
 		return -EINVAL;
 
+	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 	__nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+	clk_disable(nmk_chip->clk);
 
 	return 0;
 }
@@ -502,9 +514,13 @@ int nmk_gpio_get_mode(int gpio)
 
 	bit = 1 << (gpio - nmk_chip->chip.base);
 
+	clk_enable(nmk_chip->clk);
+
 	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
 	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
 
+	clk_disable(nmk_chip->clk);
+
 	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
 }
 EXPORT_SYMBOL(nmk_gpio_get_mode);
@@ -525,7 +541,10 @@ static void nmk_gpio_irq_ack(struct irq_data *d)
 	nmk_chip = irq_data_get_irq_chip_data(d);
 	if (!nmk_chip)
 		return;
+
+	clk_enable(nmk_chip->clk);
 	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+	clk_disable(nmk_chip->clk);
 }
 
 enum nmk_gpio_irq_type {
@@ -586,11 +605,7 @@ static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
 	if (!nmk_chip)
 		return -EINVAL;
 
-	if (enable)
-		nmk_chip->enabled |= bitmask;
-	else
-		nmk_chip->enabled &= ~bitmask;
-
+	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
 
@@ -601,6 +616,7 @@ static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
 
 	spin_unlock(&nmk_chip->lock);
 	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+	clk_disable(nmk_chip->clk);
 
 	return 0;
 }
@@ -628,10 +644,11 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 		return -EINVAL;
 	bitmask = nmk_gpio_get_bitmask(gpio);
 
+	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
 
-	if (!(nmk_chip->enabled & bitmask))
+	if (irqd_irq_disabled(d))
 		__nmk_gpio_set_wake(nmk_chip, gpio, on);
 
 	if (on)
@@ -641,13 +658,15 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 
 	spin_unlock(&nmk_chip->lock);
 	spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
+	clk_disable(nmk_chip->clk);
 
 	return 0;
 }
 
 static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 {
-	bool enabled, wake = irqd_is_wakeup_set(d);
+	bool enabled = !irqd_irq_disabled(d);
+	bool wake = irqd_is_wakeup_set(d);
 	int gpio;
 	struct nmk_gpio_chip *nmk_chip;
 	unsigned long flags;
@@ -664,8 +683,7 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	if (type & IRQ_TYPE_LEVEL_LOW)
 		return -EINVAL;
 
-	enabled = nmk_chip->enabled & bitmask;
-
+	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_chip->lock, flags);
 
 	if (enabled)
@@ -689,10 +707,28 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 		__nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true);
 
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+	clk_disable(nmk_chip->clk);
 
 	return 0;
 }
 
+static unsigned int nmk_gpio_irq_startup(struct irq_data *d)
+{
+	struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
+
+	clk_enable(nmk_chip->clk);
+	nmk_gpio_irq_unmask(d);
+	return 0;
+}
+
+static void nmk_gpio_irq_shutdown(struct irq_data *d)
+{
+	struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
+
+	nmk_gpio_irq_mask(d);
+	clk_disable(nmk_chip->clk);
+}
+
 static struct irq_chip nmk_gpio_irq_chip = {
 	.name		= "Nomadik-GPIO",
 	.irq_ack	= nmk_gpio_irq_ack,
@@ -700,6 +736,8 @@ static struct irq_chip nmk_gpio_irq_chip = {
 	.irq_unmask	= nmk_gpio_irq_unmask,
 	.irq_set_type	= nmk_gpio_irq_set_type,
 	.irq_set_wake	= nmk_gpio_irq_set_wake,
+	.irq_startup	= nmk_gpio_irq_startup,
+	.irq_shutdown	= nmk_gpio_irq_shutdown,
 };
 
 static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
@@ -726,7 +764,11 @@ static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc,
 static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq);
-	u32 status = readl(nmk_chip->addr + NMK_GPIO_IS);
+	u32 status;
+
+	clk_enable(nmk_chip->clk);
+	status = readl(nmk_chip->addr + NMK_GPIO_IS);
+	clk_disable(nmk_chip->clk);
 
 	__nmk_gpio_irq_handler(irq, desc, status);
 }
@@ -772,7 +814,12 @@ static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
 
+	clk_enable(nmk_chip->clk);
+
 	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+
+	clk_disable(nmk_chip->clk);
+
 	return 0;
 }
 
@@ -781,8 +828,15 @@ static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
 	u32 bit = 1 << offset;
+	int value;
+
+	clk_enable(nmk_chip->clk);
 
-	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+	value = (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+
+	clk_disable(nmk_chip->clk);
+
+	return value;
 }
 
 static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
@@ -791,7 +845,11 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
 
+	clk_enable(nmk_chip->clk);
+
 	__nmk_gpio_set_output(nmk_chip, offset, val);
+
+	clk_disable(nmk_chip->clk);
 }
 
 static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
@@ -800,8 +858,12 @@ static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
 	struct nmk_gpio_chip *nmk_chip =
 		container_of(chip, struct nmk_gpio_chip, chip);
 
+	clk_enable(nmk_chip->clk);
+
 	__nmk_gpio_make_output(nmk_chip, offset, val);
 
+	clk_disable(nmk_chip->clk);
+
 	return 0;
 }
 
@@ -832,6 +894,8 @@ static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 		[NMK_GPIO_ALT_C]	= "altC",
 	};
 
+	clk_enable(nmk_chip->clk);
+
 	for (i = 0; i < chip->ngpio; i++, gpio++) {
 		const char *label = gpiochip_is_requested(chip, i);
 		bool pull;
@@ -876,6 +940,8 @@ static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 
 		seq_printf(s, "\n");
 	}
+
+	clk_disable(nmk_chip->clk);
 }
 
 #else
@@ -893,6 +959,34 @@ static struct gpio_chip nmk_gpio_template = {
 	.can_sleep		= 0,
 };
 
+void nmk_gpio_clocks_enable(void)
+{
+	int i;
+
+	for (i = 0; i < NUM_BANKS; i++) {
+		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+
+		if (!chip)
+			continue;
+
+		clk_enable(chip->clk);
+	}
+}
+
+void nmk_gpio_clocks_disable(void)
+{
+	int i;
+
+	for (i = 0; i < NUM_BANKS; i++) {
+		struct nmk_gpio_chip *chip = nmk_gpio_chips[i];
+
+		if (!chip)
+			continue;
+
+		clk_disable(chip->clk);
+	}
+}
+
 /*
  * Called from the suspend/resume path to only keep the real wakeup interrupts
  * (those that have had set_irq_wake() called on them) as wakeup interrupts,
@@ -912,6 +1006,8 @@ void nmk_gpio_wakeups_suspend(void)
 		if (!chip)
 			break;
 
+		clk_enable(chip->clk);
+
 		chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC);
 		chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC);
 
@@ -926,6 +1022,8 @@ void nmk_gpio_wakeups_suspend(void)
 			/* 0 -> wakeup enable */
 			writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC);
 		}
+
+		clk_disable(chip->clk);
 	}
 }
 
@@ -939,11 +1037,15 @@ void nmk_gpio_wakeups_resume(void)
 		if (!chip)
 			break;
 
+		clk_enable(chip->clk);
+
 		writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC);
 		writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC);
 
 		if (chip->sleepmode)
 			writel(chip->slpm, chip->addr + NMK_GPIO_SLPC);
+
+		clk_disable(chip->clk);
 	}
 }
 
@@ -1010,8 +1112,6 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 		goto out_release;
 	}
 
-	clk_enable(clk);
-
 	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
 	if (!nmk_chip) {
 		ret = -ENOMEM;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 118ec12d2d5f..0b0562979171 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,7 +25,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
 struct gpio_bank {
@@ -148,13 +148,17 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 	return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
 }
 
-#define MOD_REG_BIT(reg, bit_mask, set)	\
-do {	\
-	int l = __raw_readl(base + reg); \
-	if (set) l |= bit_mask; \
-	else l &= ~bit_mask; \
-	__raw_writel(l, base + reg); \
-} while(0)
+static inline void _gpio_rmw(void __iomem *base, u32 reg, u32 mask, bool set)
+{
+	int l = __raw_readl(base + reg);
+
+	if (set) 
+		l |= mask;
+	else
+		l &= ~mask;
+
+	__raw_writel(l, base + reg);
+}
 
 /**
  * _set_gpio_debounce - low level gpio debounce time
@@ -210,28 +214,28 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 	u32 gpio_bit = 1 << gpio;
 
 	if (cpu_is_omap44xx()) {
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
+		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_LOW);
+		_gpio_rmw(base, OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_HIGH);
+		_gpio_rmw(base, OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_RISING);
+		_gpio_rmw(base, OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_FALLING);
 	} else {
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_LOW);
-		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-			trigger & IRQ_TYPE_LEVEL_HIGH);
-		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_RISING);
-		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-			trigger & IRQ_TYPE_EDGE_FALLING);
+		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_LOW);
+		_gpio_rmw(base, OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			  trigger & IRQ_TYPE_LEVEL_HIGH);
+		_gpio_rmw(base, OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_RISING);
+		_gpio_rmw(base, OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			  trigger & IRQ_TYPE_EDGE_FALLING);
 	}
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (cpu_is_omap44xx()) {
-			MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
-				trigger != 0);
+			_gpio_rmw(base, OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+				  trigger != 0);
 		} else {
 			/*
 			 * GPIO wakeup request can only be generated on edge
@@ -1086,6 +1090,11 @@ omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
 
 	gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
 				    handle_simple_irq);
+	if (!gc) {
+		dev_err(bank->dev, "Memory alloc failed for gc\n");
+		return;
+	}
+
 	ct = gc->chip_types;
 
 	/* NOTE: No ack required, reading IRQ status clears it. */
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index 0550dcb85814..147df8ae79db 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -596,9 +596,6 @@ static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert)
 
 	/* set platform specific polarity inversion */
 	ret = pca953x_write_reg(chip, PCA953X_INVERT, invert);
-	if (ret)
-		goto out;
-	return 0;
 out:
 	return ret;
 }
@@ -640,7 +637,7 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	struct pca953x_platform_data *pdata;
 	struct pca953x_chip *chip;
 	int irq_base=0, invert=0;
-	int ret = 0;
+	int ret;
 
 	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -673,10 +670,10 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
 
 	if (chip->chip_type == PCA953X_TYPE)
-		device_pca953x_init(chip, invert);
-	else if (chip->chip_type == PCA957X_TYPE)
-		device_pca957x_init(chip, invert);
+		ret = device_pca953x_init(chip, invert);
 	else
+		ret = device_pca957x_init(chip, invert);
+	if (ret)
 		goto out_failed;
 
 	ret = pca953x_irq_setup(chip, id, irq_base);
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 7369fdda92b0..3e1f1ecd07be 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -23,6 +23,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
+#include <linux/module.h>
 
 
 static const struct i2c_device_id pcf857x_id[] = {
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index 36919e77c495..a6008e123d04 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -14,12 +14,21 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
 
-#define PCH_GPIO_ALL_PINS	0xfff /* Mask for GPIO pins 0 to 11 */
-#define GPIO_NUM_PINS	12	/* Specifies number of GPIO PINS GPIO0-GPIO11 */
+#define PCH_EDGE_FALLING	0
+#define PCH_EDGE_RISING		BIT(0)
+#define PCH_LEVEL_L		BIT(1)
+#define PCH_LEVEL_H		(BIT(0) | BIT(1))
+#define PCH_EDGE_BOTH		BIT(2)
+#define PCH_IM_MASK		(BIT(0) | BIT(1) | BIT(2))
+
+#define PCH_IRQ_BASE		24
 
 struct pch_regs {
 	u32	ien;
@@ -33,18 +42,43 @@ struct pch_regs {
 	u32	pm;
 	u32	im0;
 	u32	im1;
-	u32	reserved[4];
+	u32	reserved[3];
+	u32	gpio_use_sel;
 	u32	reset;
 };
 
+enum pch_type_t {
+	INTEL_EG20T_PCH,
+	OKISEMI_ML7223m_IOH, /* OKISEMI ML7223 IOH PCIe Bus-m */
+	OKISEMI_ML7223n_IOH  /* OKISEMI ML7223 IOH PCIe Bus-n */
+};
+
+/* Specifies number of GPIO PINS */
+static int gpio_pins[] = {
+	[INTEL_EG20T_PCH] = 12,
+	[OKISEMI_ML7223m_IOH] = 8,
+	[OKISEMI_ML7223n_IOH] = 8,
+};
+
 /**
  * struct pch_gpio_reg_data - The register store data.
+ * @ien_reg:	To store contents of IEN register.
+ * @imask_reg:	To store contents of IMASK register.
  * @po_reg:	To store contents of PO register.
  * @pm_reg:	To store contents of PM register.
+ * @im0_reg:	To store contents of IM0 register.
+ * @im1_reg:	To store contents of IM1 register.
+ * @gpio_use_sel_reg : To store contents of GPIO_USE_SEL register.
+ *		       (Only ML7223 Bus-n)
  */
 struct pch_gpio_reg_data {
+	u32 ien_reg;
+	u32 imask_reg;
 	u32 po_reg;
 	u32 pm_reg;
+	u32 im0_reg;
+	u32 im1_reg;
+	u32 gpio_use_sel_reg;
 };
 
 /**
@@ -55,6 +89,12 @@ struct pch_gpio_reg_data {
  * @gpio:			Data for GPIO infrastructure.
  * @pch_gpio_reg:		Memory mapped Register data is saved here
  *				when suspend.
+ * @lock:			Used for register access protection
+ * @irq_base:		Save base of IRQ number for interrupt
+ * @ioh:		IOH ID
+ * @spinlock:		Used for register access protection in
+ *				interrupt context pch_irq_mask,
+ *				pch_irq_unmask and pch_irq_type;
  */
 struct pch_gpio {
 	void __iomem *base;
@@ -63,6 +103,9 @@ struct pch_gpio {
 	struct gpio_chip gpio;
 	struct pch_gpio_reg_data pch_gpio_reg;
 	struct mutex lock;
+	int irq_base;
+	enum pch_type_t ioh;
+	spinlock_t spinlock;
 };
 
 static void pch_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
@@ -96,7 +139,7 @@ static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
 	u32 reg_val;
 
 	mutex_lock(&chip->lock);
-	pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS;
+	pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1);
 	pm |= (1 << nr);
 	iowrite32(pm, &chip->reg->pm);
 
@@ -118,7 +161,7 @@ static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 	u32 pm;
 
 	mutex_lock(&chip->lock);
-	pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS; /*bits 0-11*/
+	pm = ioread32(&chip->reg->pm) & ((1 << gpio_pins[chip->ioh]) - 1);
 	pm &= ~(1 << nr);
 	iowrite32(pm, &chip->reg->pm);
 	mutex_unlock(&chip->lock);
@@ -131,8 +174,16 @@ static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
  */
 static void pch_gpio_save_reg_conf(struct pch_gpio *chip)
 {
+	chip->pch_gpio_reg.ien_reg = ioread32(&chip->reg->ien);
+	chip->pch_gpio_reg.imask_reg = ioread32(&chip->reg->imask);
 	chip->pch_gpio_reg.po_reg = ioread32(&chip->reg->po);
 	chip->pch_gpio_reg.pm_reg = ioread32(&chip->reg->pm);
+	chip->pch_gpio_reg.im0_reg = ioread32(&chip->reg->im0);
+	if (chip->ioh == INTEL_EG20T_PCH)
+		chip->pch_gpio_reg.im1_reg = ioread32(&chip->reg->im1);
+	if (chip->ioh == OKISEMI_ML7223n_IOH)
+		chip->pch_gpio_reg.gpio_use_sel_reg =\
+					    ioread32(&chip->reg->gpio_use_sel);
 }
 
 /*
@@ -140,10 +191,24 @@ static void pch_gpio_save_reg_conf(struct pch_gpio *chip)
  */
 static void pch_gpio_restore_reg_conf(struct pch_gpio *chip)
 {
+	iowrite32(chip->pch_gpio_reg.ien_reg, &chip->reg->ien);
+	iowrite32(chip->pch_gpio_reg.imask_reg, &chip->reg->imask);
 	/* to store contents of PO register */
 	iowrite32(chip->pch_gpio_reg.po_reg, &chip->reg->po);
 	/* to store contents of PM register */
 	iowrite32(chip->pch_gpio_reg.pm_reg, &chip->reg->pm);
+	iowrite32(chip->pch_gpio_reg.im0_reg, &chip->reg->im0);
+	if (chip->ioh == INTEL_EG20T_PCH)
+		iowrite32(chip->pch_gpio_reg.im1_reg, &chip->reg->im1);
+	if (chip->ioh == OKISEMI_ML7223n_IOH)
+		iowrite32(chip->pch_gpio_reg.gpio_use_sel_reg,
+			  &chip->reg->gpio_use_sel);
+}
+
+static int pch_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
+{
+	struct pch_gpio *chip = container_of(gpio, struct pch_gpio, gpio);
+	return chip->irq_base + offset;
 }
 
 static void pch_gpio_setup(struct pch_gpio *chip)
@@ -158,8 +223,132 @@ static void pch_gpio_setup(struct pch_gpio *chip)
 	gpio->set = pch_gpio_set;
 	gpio->dbg_show = NULL;
 	gpio->base = -1;
-	gpio->ngpio = GPIO_NUM_PINS;
+	gpio->ngpio = gpio_pins[chip->ioh];
 	gpio->can_sleep = 0;
+	gpio->to_irq = pch_gpio_to_irq;
+}
+
+static int pch_irq_type(struct irq_data *d, unsigned int type)
+{
+	u32 im;
+	u32 *im_reg;
+	u32 ien;
+	u32 im_pos;
+	int ch;
+	unsigned long flags;
+	u32 val;
+	int irq = d->irq;
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct pch_gpio *chip = gc->private;
+
+	ch = irq - chip->irq_base;
+	if (irq <= chip->irq_base + 7) {
+		im_reg = &chip->reg->im0;
+		im_pos = ch;
+	} else {
+		im_reg = &chip->reg->im1;
+		im_pos = ch - 8;
+	}
+	dev_dbg(chip->dev, "%s:irq=%d type=%d ch=%d pos=%d\n",
+		__func__, irq, type, ch, im_pos);
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		val = PCH_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		val = PCH_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		val = PCH_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		val = PCH_LEVEL_H;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		val = PCH_LEVEL_L;
+		break;
+	case IRQ_TYPE_PROBE:
+		goto end;
+	default:
+		dev_warn(chip->dev, "%s: unknown type(%dd)",
+			__func__, type);
+		goto end;
+	}
+
+	/* Set interrupt mode */
+	im = ioread32(im_reg) & ~(PCH_IM_MASK << (im_pos * 4));
+	iowrite32(im | (val << (im_pos * 4)), im_reg);
+
+	/* iclr */
+	iowrite32(BIT(ch), &chip->reg->iclr);
+
+	/* IMASKCLR */
+	iowrite32(BIT(ch), &chip->reg->imaskclr);
+
+	/* Enable interrupt */
+	ien = ioread32(&chip->reg->ien);
+	iowrite32(ien | BIT(ch), &chip->reg->ien);
+end:
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+
+	return 0;
+}
+
+static void pch_irq_unmask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct pch_gpio *chip = gc->private;
+
+	iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imaskclr);
+}
+
+static void pch_irq_mask(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct pch_gpio *chip = gc->private;
+
+	iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imask);
+}
+
+static irqreturn_t pch_gpio_handler(int irq, void *dev_id)
+{
+	struct pch_gpio *chip = dev_id;
+	u32 reg_val = ioread32(&chip->reg->istatus);
+	int i;
+	int ret = IRQ_NONE;
+
+	for (i = 0; i < gpio_pins[chip->ioh]; i++) {
+		if (reg_val & BIT(i)) {
+			dev_dbg(chip->dev, "%s:[%d]:irq=%d  status=0x%x\n",
+				__func__, i, irq, reg_val);
+			iowrite32(BIT(i), &chip->reg->iclr);
+			generic_handle_irq(chip->irq_base + i);
+			ret = IRQ_HANDLED;
+		}
+	}
+	return ret;
+}
+
+static __devinit void pch_gpio_alloc_generic_chip(struct pch_gpio *chip,
+				unsigned int irq_start, unsigned int num)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+
+	gc = irq_alloc_generic_chip("pch_gpio", 1, irq_start, chip->base,
+				    handle_simple_irq);
+	gc->private = chip;
+	ct = gc->chip_types;
+
+	ct->chip.irq_mask = pch_irq_mask;
+	ct->chip.irq_unmask = pch_irq_unmask;
+	ct->chip.irq_set_type = pch_irq_type;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
 }
 
 static int __devinit pch_gpio_probe(struct pci_dev *pdev,
@@ -167,6 +356,7 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
 {
 	s32 ret;
 	struct pch_gpio *chip;
+	int irq_base;
 
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
@@ -192,6 +382,13 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
 		goto err_iomap;
 	}
 
+	if (pdev->device == 0x8803)
+		chip->ioh = INTEL_EG20T_PCH;
+	else if (pdev->device == 0x8014)
+		chip->ioh = OKISEMI_ML7223m_IOH;
+	else if (pdev->device == 0x8043)
+		chip->ioh = OKISEMI_ML7223n_IOH;
+
 	chip->reg = chip->base;
 	pci_set_drvdata(pdev, chip);
 	mutex_init(&chip->lock);
@@ -202,8 +399,36 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
 		goto err_gpiochip_add;
 	}
 
+	irq_base = irq_alloc_descs(-1, 0, gpio_pins[chip->ioh], NUMA_NO_NODE);
+	if (irq_base < 0) {
+		dev_warn(&pdev->dev, "PCH gpio: Failed to get IRQ base num\n");
+		chip->irq_base = -1;
+		goto end;
+	}
+	chip->irq_base = irq_base;
+
+	ret = request_irq(pdev->irq, pch_gpio_handler,
+			     IRQF_SHARED, KBUILD_MODNAME, chip);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"%s request_irq failed\n", __func__);
+		goto err_request_irq;
+	}
+
+	pch_gpio_alloc_generic_chip(chip, irq_base, gpio_pins[chip->ioh]);
+
+	/* Initialize interrupt ien register */
+	iowrite32(0, &chip->reg->ien);
+end:
 	return 0;
 
+err_request_irq:
+	irq_free_descs(irq_base, gpio_pins[chip->ioh]);
+
+	ret = gpiochip_remove(&chip->gpio);
+	if (ret)
+		dev_err(&pdev->dev, "%s gpiochip_remove failed\n", __func__);
+
 err_gpiochip_add:
 	pci_iounmap(pdev, chip->base);
 
@@ -224,6 +449,12 @@ static void __devexit pch_gpio_remove(struct pci_dev *pdev)
 	int err;
 	struct pch_gpio *chip = pci_get_drvdata(pdev);
 
+	if (chip->irq_base != -1) {
+		free_irq(pdev->irq, chip);
+
+		irq_free_descs(chip->irq_base, gpio_pins[chip->ioh]);
+	}
+
 	err = gpiochip_remove(&chip->gpio);
 	if (err)
 		dev_err(&pdev->dev, "Failed gpiochip_remove\n");
@@ -239,9 +470,11 @@ static int pch_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	s32 ret;
 	struct pch_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
 
+	spin_lock_irqsave(&chip->spinlock, flags);
 	pch_gpio_save_reg_conf(chip);
-	pch_gpio_restore_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	ret = pci_save_state(pdev);
 	if (ret) {
@@ -261,6 +494,7 @@ static int pch_gpio_resume(struct pci_dev *pdev)
 {
 	s32 ret;
 	struct pch_gpio *chip = pci_get_drvdata(pdev);
+	unsigned long flags;
 
 	ret = pci_enable_wake(pdev, PCI_D0, 0);
 
@@ -272,9 +506,11 @@ static int pch_gpio_resume(struct pci_dev *pdev)
 	}
 	pci_restore_state(pdev);
 
+	spin_lock_irqsave(&chip->spinlock, flags);
 	iowrite32(0x01, &chip->reg->reset);
 	iowrite32(0x00, &chip->reg->reset);
 	pch_gpio_restore_reg_conf(chip);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
 
 	return 0;
 }
@@ -287,6 +523,7 @@ static int pch_gpio_resume(struct pci_dev *pdev)
 static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 2c5a18f32bf3..093c90bd3c1d 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -118,7 +118,7 @@ static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
 {
 	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
 
-	if (chip->irq_base == (unsigned) -1)
+	if (chip->irq_base == NO_IRQ)
 		return -EINVAL;
 
 	return chip->irq_base + offset;
@@ -246,6 +246,18 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	if (chip == NULL)
 		return -ENOMEM;
 
+	pdata = dev->dev.platform_data;
+	if (pdata) {
+		chip->gc.base = pdata->gpio_base;
+		chip->irq_base = pdata->irq_base;
+	} else if (dev->dev.of_node) {
+		chip->gc.base = -1;
+		chip->irq_base = NO_IRQ;
+	} else {
+		ret = -ENODEV;
+		goto free_mem;
+	}
+
 	if (!request_mem_region(dev->res.start,
 				resource_size(&dev->res), "pl061")) {
 		ret = -EBUSY;
@@ -267,14 +279,11 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	chip->gc.get = pl061_get_value;
 	chip->gc.set = pl061_set_value;
 	chip->gc.to_irq = pl061_to_irq;
-	chip->gc.base = pdata->gpio_base;
 	chip->gc.ngpio = PL061_GPIO_NR;
 	chip->gc.label = dev_name(&dev->dev);
 	chip->gc.dev = &dev->dev;
 	chip->gc.owner = THIS_MODULE;
 
-	chip->irq_base = pdata->irq_base;
-
 	ret = gpiochip_add(&chip->gc);
 	if (ret)
 		goto iounmap;
@@ -283,7 +292,7 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	 * irq_chip support
 	 */
 
-	if (chip->irq_base == (unsigned) -1)
+	if (chip->irq_base == NO_IRQ)
 		return 0;
 
 	writeb(0, chip->base + GPIOIE); /* disable irqs */
@@ -307,11 +316,13 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	list_add(&chip->list, chip_list);
 
 	for (i = 0; i < PL061_GPIO_NR; i++) {
-		if (pdata->directions & (1 << i))
-			pl061_direction_output(&chip->gc, i,
-					pdata->values & (1 << i));
-		else
-			pl061_direction_input(&chip->gc, i);
+		if (pdata) {
+			if (pdata->directions & (1 << i))
+				pl061_direction_output(&chip->gc, i,
+						pdata->values & (1 << i));
+			else
+				pl061_direction_input(&chip->gc, i);
+		}
 
 		irq_set_chip_and_handler(i + chip->irq_base, &pl061_irqchip,
 					 handle_simple_irq);
diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c
deleted file mode 100644
index ef67f1952a72..000000000000
--- a/drivers/gpio/gpio-plat-samsung.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * SAMSUNG - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The samsung_gpiolib_4bit routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
-*/
-
-static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
-				      unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + GPIOCON_OFF);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
-				       unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + GPIOCON_OFF);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, base + GPIOCON_OFF);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-/* The next set of routines are for the case where the GPIO configuration
- * registers are 4 bits per GPIO but there is more than one register (the
- * bank has more than 8 GPIOs.
- *
- * This case is the similar to the 4 bit case, but the registers are as
- * follows:
- *
- * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
- *		gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x08: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we
- * store the 'base + 0x4' address so that these routines see the data
- * register at ourchip->base + 0x04.
- */
-
-static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
-				       unsigned int offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-
-	if (offset > 7)
-		offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, regcon);
-
-	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
-					unsigned int offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	void __iomem *regcon = base;
-	unsigned long con;
-	unsigned long dat;
-	unsigned con_offset = offset;
-
-	if (con_offset > 7)
-		con_offset -= 8;
-	else
-		regcon -= 4;
-
-	con = __raw_readl(regcon);
-	con &= ~(0xf << con_4bit_shift(con_offset));
-	con |= 0x1 << con_4bit_shift(con_offset);
-
-	dat = __raw_readl(base + GPIODAT_OFF);
-
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + GPIODAT_OFF);
-	__raw_writel(con, regcon);
-	__raw_writel(dat, base + GPIODAT_OFF);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = samsung_gpiolib_4bit2_input;
-	chip->chip.direction_output = samsung_gpiolib_4bit2_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-}
-
-void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
-					    int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++) {
-		samsung_gpiolib_add_4bit2(chip);
-		s3c_gpiolib_add(chip);
-	}
-}
-
-void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip,
-					   int nr_chips)
-{
-	for (; nr_chips > 0; nr_chips--, chip++)
-		s3c_gpiolib_add(chip);
-}
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
new file mode 100644
index 000000000000..ee137712f9db
--- /dev/null
+++ b/drivers/gpio/gpio-pxa.c
@@ -0,0 +1,338 @@
+/*
+ *  linux/arch/arm/plat-pxa/gpio.c
+ *
+ *  Generic PXA GPIO handling
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+#include <linux/slab.h>
+
+#include <mach/gpio-pxa.h>
+
+int pxa_last_gpio;
+
+struct pxa_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem	*regbase;
+	char label[10];
+
+	unsigned long	irq_mask;
+	unsigned long	irq_edge_rise;
+	unsigned long	irq_edge_fall;
+
+#ifdef CONFIG_PM
+	unsigned long	saved_gplr;
+	unsigned long	saved_gpdr;
+	unsigned long	saved_grer;
+	unsigned long	saved_gfer;
+#endif
+};
+
+static DEFINE_SPINLOCK(gpio_lock);
+static struct pxa_gpio_chip *pxa_gpio_chips;
+
+#define for_each_gpio_chip(i, c)			\
+	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
+
+static inline void __iomem *gpio_chip_base(struct gpio_chip *c)
+{
+	return container_of(c, struct pxa_gpio_chip, chip)->regbase;
+}
+
+static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
+{
+	return &pxa_gpio_chips[gpio_to_bank(gpio)];
+}
+
+static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t value, mask = 1 << offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	value = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		value |= mask;
+	else
+		value &= ~mask;
+	__raw_writel(value, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	void __iomem *base = gpio_chip_base(chip);
+	uint32_t tmp, mask = 1 << offset;
+	unsigned long flags;
+
+	__raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	tmp = __raw_readl(base + GPDR_OFFSET);
+	if (__gpio_is_inverted(chip->base + offset))
+		tmp &= ~mask;
+	else
+		tmp |= mask;
+	__raw_writel(tmp, base + GPDR_OFFSET);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return 0;
+}
+
+static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+}
+
+static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	__raw_writel(1 << offset, gpio_chip_base(chip) +
+				(value ? GPSR_OFFSET : GPCR_OFFSET));
+}
+
+static int __init pxa_init_gpio_chip(int gpio_end)
+{
+	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
+	struct pxa_gpio_chip *chips;
+
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
+	if (chips == NULL) {
+		pr_err("%s: failed to allocate GPIO chips\n", __func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
+		struct gpio_chip *c = &chips[i].chip;
+
+		sprintf(chips[i].label, "gpio-%d", i);
+		chips[i].regbase = GPIO_BANK(i);
+
+		c->base  = gpio;
+		c->label = chips[i].label;
+
+		c->direction_input  = pxa_gpio_direction_input;
+		c->direction_output = pxa_gpio_direction_output;
+		c->get = pxa_gpio_get;
+		c->set = pxa_gpio_set;
+
+		/* number of GPIOs on last bank may be less than 32 */
+		c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
+		gpiochip_add(c);
+	}
+	pxa_gpio_chips = chips;
+	return 0;
+}
+
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+	uint32_t grer, gfer;
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+	grer |= c->irq_edge_rise & c->irq_mask;
+	gfer |= c->irq_edge_fall & c->irq_mask;
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct pxa_gpio_chip *c;
+	int gpio = irq_to_gpio(d->irq);
+	unsigned long gpdr, mask = GPIO_bit(gpio);
+
+	c = gpio_to_pxachip(gpio);
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* Don't mess with enabled GPIOs using preconfigured edges or
+		 * GPIOs set to alternate function or to output during probe
+		 */
+		if ((c->irq_edge_rise | c->irq_edge_fall) & GPIO_bit(gpio))
+			return 0;
+
+		if (__gpio_is_occupied(gpio))
+			return 0;
+
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+
+	if (__gpio_is_inverted(gpio))
+		__raw_writel(gpdr | mask,  c->regbase + GPDR_OFFSET);
+	else
+		__raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		c->irq_edge_rise |= mask;
+	else
+		c->irq_edge_rise &= ~mask;
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		c->irq_edge_fall |= mask;
+	else
+		c->irq_edge_fall &= ~mask;
+
+	update_edge_detect(c);
+
+	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio,
+		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
+		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+	return 0;
+}
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pxa_gpio_chip *c;
+	int loop, gpio, gpio_base, n;
+	unsigned long gedr;
+
+	do {
+		loop = 0;
+		for_each_gpio_chip(gpio, c) {
+			gpio_base = c->chip.base;
+
+			gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+			gedr = gedr & c->irq_mask;
+			__raw_writel(gedr, c->regbase + GEDR_OFFSET);
+
+			n = find_first_bit(&gedr, BITS_PER_LONG);
+			while (n < BITS_PER_LONG) {
+				loop = 1;
+
+				generic_handle_irq(gpio_to_irq(gpio_base + n));
+				n = find_next_bit(&gedr, BITS_PER_LONG, n + 1);
+			}
+		}
+	} while (loop);
+}
+
+static void pxa_ack_muxed_gpio(struct irq_data *d)
+{
+	int gpio = irq_to_gpio(d->irq);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+}
+
+static void pxa_mask_muxed_gpio(struct irq_data *d)
+{
+	int gpio = irq_to_gpio(d->irq);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+	uint32_t grer, gfer;
+
+	c->irq_mask &= ~GPIO_bit(gpio);
+
+	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+	__raw_writel(grer, c->regbase + GRER_OFFSET);
+	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
+static void pxa_unmask_muxed_gpio(struct irq_data *d)
+{
+	int gpio = irq_to_gpio(d->irq);
+	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
+
+	c->irq_mask |= GPIO_bit(gpio);
+	update_edge_detect(c);
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+	.name		= "GPIO",
+	.irq_ack	= pxa_ack_muxed_gpio,
+	.irq_mask	= pxa_mask_muxed_gpio,
+	.irq_unmask	= pxa_unmask_muxed_gpio,
+	.irq_set_type	= pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+{
+	struct pxa_gpio_chip *c;
+	int gpio, irq;
+
+	pxa_last_gpio = end;
+
+	/* Initialize GPIO chips */
+	pxa_init_gpio_chip(end);
+
+	/* clear all GPIO edge detects */
+	for_each_gpio_chip(gpio, c) {
+		__raw_writel(0, c->regbase + GFER_OFFSET);
+		__raw_writel(0, c->regbase + GRER_OFFSET);
+		__raw_writel(~0,c->regbase + GEDR_OFFSET);
+	}
+
+	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+		irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+					 handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Install handler for GPIO>=2 edge detect interrupts */
+	irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
+	pxa_muxed_gpio_chip.irq_set_wake = fn;
+}
+
+#ifdef CONFIG_PM
+static int pxa_gpio_suspend(void)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
+		c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+		c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
+		c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+
+		/* Clear GPIO transition detect bits */
+		__raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+	}
+	return 0;
+}
+
+static void pxa_gpio_resume(void)
+{
+	struct pxa_gpio_chip *c;
+	int gpio;
+
+	for_each_gpio_chip(gpio, c) {
+		/* restore level with set/clear */
+		__raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
+		__raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+
+		__raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
+		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
+		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+	}
+}
+#else
+#define pxa_gpio_suspend	NULL
+#define pxa_gpio_resume		NULL
+#endif
+
+struct syscore_ops pxa_gpio_syscore_ops = {
+	.suspend	= pxa_gpio_suspend,
+	.resume		= pxa_gpio_resume,
+};
diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c
deleted file mode 100644
index 7f87b0c76e0b..000000000000
--- a/drivers/gpio/gpio-s5pc100.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * S5PC100 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- *  Copyright 2009 Samsung Electronics Co
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
-	.cfg_eint	= 0xf,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/*
- * GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PC100_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in S5PC100.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
-	{
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_eint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pc100_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
-	int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-	int gpioint_group = 0;
-	int i;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PC100_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pc100_gpiolib_init);
diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c
deleted file mode 100644
index eb12f1602de9..000000000000
--- a/drivers/gpio/gpio-s5pv210.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * S5PV210 - GPIOlib support
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <mach/map.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-/* GPIO bank's base address given the index of the bank in the
- * list of all gpio banks.
- */
-#define S5PV210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
-
-/*
- * Following are the gpio banks in v210.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
-	{
-		.chip	= {
-			.base	= S5PV210_GPA0(0),
-			.ngpio	= S5PV210_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPA1(0),
-			.ngpio	= S5PV210_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPB(0),
-			.ngpio	= S5PV210_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC0(0),
-			.ngpio	= S5PV210_GPIO_C0_NR,
-			.label	= "GPC0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPC1(0),
-			.ngpio	= S5PV210_GPIO_C1_NR,
-			.label	= "GPC1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD0(0),
-			.ngpio	= S5PV210_GPIO_D0_NR,
-			.label	= "GPD0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPD1(0),
-			.ngpio	= S5PV210_GPIO_D1_NR,
-			.label	= "GPD1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE0(0),
-			.ngpio	= S5PV210_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPE1(0),
-			.ngpio	= S5PV210_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF0(0),
-			.ngpio	= S5PV210_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF1(0),
-			.ngpio	= S5PV210_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF2(0),
-			.ngpio	= S5PV210_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPF3(0),
-			.ngpio	= S5PV210_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG0(0),
-			.ngpio	= S5PV210_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG1(0),
-			.ngpio	= S5PV210_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG2(0),
-			.ngpio	= S5PV210_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPG3(0),
-			.ngpio	= S5PV210_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_GPI(0),
-			.ngpio	= S5PV210_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ0(0),
-			.ngpio	= S5PV210_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ1(0),
-			.ngpio	= S5PV210_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ2(0),
-			.ngpio	= S5PV210_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ3(0),
-			.ngpio	= S5PV210_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.chip	= {
-			.base	= S5PV210_GPJ4(0),
-			.ngpio	= S5PV210_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP01(0),
-			.ngpio	= S5PV210_GPIO_MP01_NR,
-			.label	= "MP01",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP02(0),
-			.ngpio	= S5PV210_GPIO_MP02_NR,
-			.label	= "MP02",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP03(0),
-			.ngpio	= S5PV210_GPIO_MP03_NR,
-			.label	= "MP03",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP04(0),
-			.ngpio	= S5PV210_GPIO_MP04_NR,
-			.label	= "MP04",
-		},
-	}, {
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PV210_MP05(0),
-			.ngpio	= S5PV210_GPIO_MP05_NR,
-			.label	= "MP05",
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC00),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(0),
-		.chip	= {
-			.base	= S5PV210_GPH0(0),
-			.ngpio	= S5PV210_GPIO_H0_NR,
-			.label	= "GPH0",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC20),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(8),
-		.chip	= {
-			.base	= S5PV210_GPH1(0),
-			.ngpio	= S5PV210_GPIO_H1_NR,
-			.label	= "GPH1",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC40),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(16),
-		.chip	= {
-			.base	= S5PV210_GPH2(0),
-			.ngpio	= S5PV210_GPIO_H2_NR,
-			.label	= "GPH2",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	}, {
-		.base	= (S5P_VA_GPIO + 0xC60),
-		.config	= &gpio_cfg_noint,
-		.irq_base = IRQ_EINT(24),
-		.chip	= {
-			.base	= S5PV210_GPH3(0),
-			.ngpio	= S5PV210_GPIO_H3_NR,
-			.label	= "GPH3",
-			.to_irq = samsung_gpiolib_to_irq,
-		},
-	},
-};
-
-static __init int s5pv210_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
-	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
-	int gpioint_group = 0;
-	int i = 0;
-
-	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL) {
-			chip->config = &gpio_cfg;
-			chip->group = gpioint_group++;
-		}
-		if (chip->base == NULL)
-			chip->base = S5PV210_BANK_BASE(i);
-	}
-
-	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
-	s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
-
-	return 0;
-}
-core_initcall(s5pv210_gpiolib_init);
diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c
new file mode 100644
index 000000000000..b6c1f6d80649
--- /dev/null
+++ b/drivers/gpio/gpio-sa1100.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/mach-sa1100/gpio.c
+ *
+ * Generic SA-1100 GPIO handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <mach/hardware.h>
+
+static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return GPLR & GPIO_GPIO(offset);
+}
+
+static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		GPSR = GPIO_GPIO(offset);
+	else
+		GPCR = GPIO_GPIO(offset);
+}
+
+static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	GPDR &= ~GPIO_GPIO(offset);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sa1100_gpio_set(chip, offset, value);
+	GPDR |= GPIO_GPIO(offset);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static struct gpio_chip sa1100_gpio_chip = {
+	.label			= "gpio",
+	.direction_input	= sa1100_direction_input,
+	.direction_output	= sa1100_direction_output,
+	.set			= sa1100_gpio_set,
+	.get			= sa1100_gpio_get,
+	.base			= 0,
+	.ngpio			= GPIO_MAX + 1,
+};
+
+void __init sa1100_init_gpio(void)
+{
+	gpiochip_add(&sa1100_gpio_chip);
+}
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
new file mode 100644
index 000000000000..866251852719
--- /dev/null
+++ b/drivers/gpio/gpio-samsung.c
@@ -0,0 +1,2712 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/ioport.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/gpio-fns.h>
+#include <plat/pm.h>
+
+#ifndef DEBUG_GPIO
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+			 unsigned int off, samsung_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+				  unsigned int off, samsung_gpio_pull_t pull,
+				  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	if (pull == updown)
+		pup &= ~(1 << off);
+	else if (pull == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+						  unsigned int off,
+						  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+			     unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+					       unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+			       unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	if (pull == S3C_GPIO_PULL_UP)
+		pull = 3;
+
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	if (pull == 3)
+		pull = S3C_GPIO_PULL_UP;
+
+	return pull;
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+					  unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+#endif
+
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
+static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift;
+	u32 con;
+
+	switch (off) {
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		shift = (off & 7) * 4;
+		reg -= 4;
+		break;
+	case 6:
+		shift = ((off + 1) & 7) * 4;
+		reg -= 4;
+	default:
+		shift = ((off + 1) & 7) * 4;
+		break;
+	}
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+#endif
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config = samsung_gpio_setcfg_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config = samsung_gpio_getcfg_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull = samsung_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull = samsung_gpio_getpull_updown;
+	}
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= samsung_gpio_setcfg_2bit,
+	.get_config	= samsung_gpio_getcfg_2bit,
+};
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c24xx_gpio_setcfg_abank,
+	.get_config	= s3c24xx_gpio_getcfg_abank,
+};
+#endif
+
+static struct samsung_gpio_cfg exynos4_gpio_cfg = {
+	.set_pull	= exynos4_gpio_setpull,
+	.get_pull	= exynos4_gpio_getpull,
+	.set_config	= samsung_gpio_setcfg_4bit,
+	.get_config	= samsung_gpio_getcfg_4bit,
+};
+
+#if defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450)
+static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
+	.cfg_eint	= 0x3,
+	.set_config	= s5p64x0_gpio_setcfg_rbank,
+	.get_config	= samsung_gpio_getcfg_4bit,
+	.set_pull	= samsung_gpio_setpull_updown,
+	.get_pull	= samsung_gpio_getpull_updown,
+};
+#endif
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+	{
+		.cfg_eint	= 0x0,
+	}, {
+		.cfg_eint	= 0x3,
+	}, {
+		.cfg_eint	= 0x7,
+	}, {
+		.cfg_eint	= 0xF,
+	}, {
+		.cfg_eint	= 0x0,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.cfg_eint	= 0x2,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.cfg_eint	= 0x3,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	}, {
+		.set_pull	= exynos4_gpio_setpull,
+		.get_pull	= exynos4_gpio_getpull,
+	}, {
+		.cfg_eint	= 0x3,
+		.set_pull	= exynos4_gpio_setpull,
+		.get_pull	= exynos4_gpio_getpull,
+	}
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	dat = __raw_readl(base + 0x04);
+
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+
+	__raw_writel(dat, base + 0x04);
+
+	con &= ~(1 << offset);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+#endif
+
+/* The next set of routines are for the case of s5p64x0 bank r */
+
+static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long flags;
+
+	switch (offset) {
+	case 6:
+		offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		offset -= 7;
+		break;
+	}
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned long flags;
+	unsigned con_offset  = offset;
+
+	switch (con_offset) {
+	case 6:
+		con_offset += 1;
+	case 0:
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+	case 5:
+		regcon -= 4;
+		break;
+	default:
+		con_offset -= 7;
+		break;
+	}
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	samsung_gpio_unlock(ourchip, flags);
+
+	return 0;
+}
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	spin_lock_init(&chip->lock);
+
+	if (!gc->direction_input)
+		gc->direction_input = samsung_gpiolib_2bit_input;
+	if (!gc->direction_output)
+		gc->direction_output = samsung_gpiolib_2bit_output;
+	if (!gc->set)
+		gc->set = samsung_gpiolib_set;
+	if (!gc->get)
+		gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			printk(KERN_ERR "gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add(gc);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+					     int nr_chips, void __iomem *base)
+{
+	int i;
+	struct gpio_chip *gc = &chip->chip;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		/* skip banks not present on SoC */
+		if (chip->chip.base >= S3C_GPIO_END)
+			continue;
+
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x10);
+
+		if (!gc->direction_input)
+			gc->direction_input = samsung_gpiolib_2bit_input;
+		if (!gc->direction_output)
+			gc->direction_output = samsung_gpiolib_2bit_output;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base,
+						  unsigned int offset)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_2bit_input;
+		chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[7];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * offset);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x20);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+						   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip,
+					     int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = s5p64x0_gpiolib_rbank_input;
+		chip->chip.direction_output = s5p64x0_gpiolib_rbank_output;
+
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip);
+
+	return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 4)
+		return IRQ_EINT0 + offset;
+
+	if (offset < 8)
+		return IRQ_EINT4 + offset - 4;
+
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_PLAT_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+	{
+		.config	= &s3c24xx_gpiocfg_banka,
+		.chip	= {
+			.base			= S3C2410_GPA(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOA",
+			.ngpio			= 24,
+			.direction_input	= s3c24xx_gpiolib_banka_input,
+			.direction_output	= s3c24xx_gpiolib_banka_output,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPB(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOB",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPC(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOC",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPD(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOD",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPE(0),
+			.label	= "GPIOE",
+			.owner	= THIS_MODULE,
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPF(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOF",
+			.ngpio	= 8,
+			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
+		},
+	}, {
+		.irq_base = IRQ_EINT8,
+		.chip	= {
+			.base	= S3C2410_GPG(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOG",
+			.ngpio	= 16,
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPH(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOH",
+			.ngpio	= 11,
+		},
+	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.chip	= {
+			.base	= S3C2410_GPJ(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOJ",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.chip	= {
+			.base	= S3C2410_GPK(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOK",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.chip	= {
+			.base	= S3C2410_GPL(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOL",
+			.ngpio	= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.chip	= {
+			.base	= S3C2410_GPM(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOM",
+			.ngpio	= 2,
+		},
+	},
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_PLAT_S3C64XX
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * F	2	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	8	2Bit	Yes	8
+ * R	15	4Bit[2]	Yes	8
+ */
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.chip	= {
+			.base	= S5P6440_GPA(0),
+			.ngpio	= S5P6440_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6440_GPB(0),
+			.ngpio	= S5P6440_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6440_GPC(0),
+			.ngpio	= S5P6440_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5P64X0_GPG_BASE,
+		.chip	= {
+			.base	= S5P6440_GPG(0),
+			.ngpio	= S5P6440_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6440_GPH(0),
+			.ngpio	= S5P6440_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfg_rbank,
+		.chip	= {
+			.base	= S5P6440_GPR(0),
+			.ngpio	= S5P6440_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6440_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6440
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6440_GPF(0),
+			.ngpio	= S5P6440_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPI(0),
+			.ngpio	= S5P6440_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6440_GPJ(0),
+			.ngpio	= S5P6440_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6440_GPN(0),
+			.ngpio	= S5P6440_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6440_GPP(0),
+			.ngpio	= S5P6440_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	},
+#endif
+};
+
+/*
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	6	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	8	4Bit	Yes	None
+ * F	2	2Bit	Yes	None
+ * G	14	4Bit[2]	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	5	4Bit	Yes	None
+ * N	16	2Bit	No	IRQ_EINT
+ * P	11	2Bit	Yes	8
+ * Q	14	2Bit	Yes	None
+ * R	15	4Bit[2]	Yes	None
+ * S	8	2Bit	Yes	None
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.chip	= {
+			.base	= S5P6450_GPA(0),
+			.ngpio	= S5P6450_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPB(0),
+			.ngpio	= S5P6450_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPC(0),
+			.ngpio	= S5P6450_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S5P6450_GPD(0),
+			.ngpio	= S5P6450_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5P6450_GPK_BASE,
+		.chip	= {
+			.base	= S5P6450_GPK(0),
+			.ngpio	= S5P6450_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPG_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6450_GPG(0),
+			.ngpio	= S5P6450_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S5P64X0_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S5P6450_GPH(0),
+			.ngpio	= S5P6450_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_rbank[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPR_BASE + 0x4,
+		.config	= &s5p64x0_gpio_cfg_rbank,
+		.chip	= {
+			.base	= S5P6450_GPR(0),
+			.ngpio	= S5P6450_GPIO_R_NR,
+			.label	= "GPR",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s5p6450_gpios_2bit[] = {
+#ifdef CONFIG_CPU_S5P6450
+	{
+		.base	= S5P64X0_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPF(0),
+			.ngpio	= S5P6450_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.base	= S5P64X0_GPI_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPI(0),
+			.ngpio	= S5P6450_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5P64X0_GPJ_BASE,
+		.config	= &samsung_gpio_cfgs[4],
+		.chip	= {
+			.base	= S5P6450_GPJ(0),
+			.ngpio	= S5P6450_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.base	= S5P64X0_GPN_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPN(0),
+			.ngpio	= S5P6450_GPIO_N_NR,
+			.label	= "GPN",
+		},
+	}, {
+		.base	= S5P64X0_GPP_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPP(0),
+			.ngpio	= S5P6450_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.base	= S5P6450_GPQ_BASE,
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S5P6450_GPQ(0),
+			.ngpio	= S5P6450_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S5P6450_GPS_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S5P6450_GPS(0),
+			.ngpio	= S5P6450_GPIO_S_NR,
+			.label	= "GPS",
+		},
+	},
+#endif
+};
+
+/*
+ * S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+static struct samsung_gpio_chip s5pc100_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PC100
+	{
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * Followings are the gpio banks in S5PV210/S5PC110
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip s5pv210_gpios_4bit[] = {
+#ifdef CONFIG_CPU_S5PV210
+	{
+		.chip	= {
+			.base	= S5PV210_GPA0(0),
+			.ngpio	= S5PV210_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPA1(0),
+			.ngpio	= S5PV210_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPB(0),
+			.ngpio	= S5PV210_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC0(0),
+			.ngpio	= S5PV210_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC1(0),
+			.ngpio	= S5PV210_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD0(0),
+			.ngpio	= S5PV210_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD1(0),
+			.ngpio	= S5PV210_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE0(0),
+			.ngpio	= S5PV210_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE1(0),
+			.ngpio	= S5PV210_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF0(0),
+			.ngpio	= S5PV210_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF1(0),
+			.ngpio	= S5PV210_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF2(0),
+			.ngpio	= S5PV210_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF3(0),
+			.ngpio	= S5PV210_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG0(0),
+			.ngpio	= S5PV210_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG1(0),
+			.ngpio	= S5PV210_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG2(0),
+			.ngpio	= S5PV210_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG3(0),
+			.ngpio	= S5PV210_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPI(0),
+			.ngpio	= S5PV210_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ0(0),
+			.ngpio	= S5PV210_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ1(0),
+			.ngpio	= S5PV210_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ2(0),
+			.ngpio	= S5PV210_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ3(0),
+			.ngpio	= S5PV210_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ4(0),
+			.ngpio	= S5PV210_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP01(0),
+			.ngpio	= S5PV210_GPIO_MP01_NR,
+			.label	= "MP01",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP02(0),
+			.ngpio	= S5PV210_GPIO_MP02_NR,
+			.label	= "MP02",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP03(0),
+			.ngpio	= S5PV210_GPIO_MP03_NR,
+			.label	= "MP03",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP04(0),
+			.ngpio	= S5PV210_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_MP05(0),
+			.ngpio	= S5PV210_GPIO_MP05_NR,
+			.label	= "MP05",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PV210_GPH0(0),
+			.ngpio	= S5PV210_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PV210_GPH1(0),
+			.ngpio	= S5PV210_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PV210_GPH2(0),
+			.ngpio	= S5PV210_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PV210_GPH3(0),
+			.ngpio	= S5PV210_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/*
+ * Followings are the gpio banks in EXYNOS4210
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure samsung_gpio_cfgs[3] in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of samsung_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+
+static struct samsung_gpio_chip exynos4_gpios_1[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPA0(0),
+			.ngpio	= EXYNOS4_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPA1(0),
+			.ngpio	= EXYNOS4_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPB(0),
+			.ngpio	= EXYNOS4_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC0(0),
+			.ngpio	= EXYNOS4_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPC1(0),
+			.ngpio	= EXYNOS4_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD0(0),
+			.ngpio	= EXYNOS4_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPD1(0),
+			.ngpio	= EXYNOS4_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE0(0),
+			.ngpio	= EXYNOS4_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE1(0),
+			.ngpio	= EXYNOS4_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE2(0),
+			.ngpio	= EXYNOS4_GPIO_E2_NR,
+			.label	= "GPE2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE3(0),
+			.ngpio	= EXYNOS4_GPIO_E3_NR,
+			.label	= "GPE3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPE4(0),
+			.ngpio	= EXYNOS4_GPIO_E4_NR,
+			.label	= "GPE4",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF0(0),
+			.ngpio	= EXYNOS4_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF1(0),
+			.ngpio	= EXYNOS4_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF2(0),
+			.ngpio	= EXYNOS4_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPF3(0),
+			.ngpio	= EXYNOS4_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_2[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPJ0(0),
+			.ngpio	= EXYNOS4_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPJ1(0),
+			.ngpio	= EXYNOS4_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK0(0),
+			.ngpio	= EXYNOS4_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK1(0),
+			.ngpio	= EXYNOS4_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK2(0),
+			.ngpio	= EXYNOS4_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPK3(0),
+			.ngpio	= EXYNOS4_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL0(0),
+			.ngpio	= EXYNOS4_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL1(0),
+			.ngpio	= EXYNOS4_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.chip	= {
+			.base	= EXYNOS4_GPL2(0),
+			.ngpio	= EXYNOS4_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY0(0),
+			.ngpio	= EXYNOS4_GPIO_Y0_NR,
+			.label	= "GPY0",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY1(0),
+			.ngpio	= EXYNOS4_GPIO_Y1_NR,
+			.label	= "GPY1",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY2(0),
+			.ngpio	= EXYNOS4_GPIO_Y2_NR,
+			.label	= "GPY2",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY3(0),
+			.ngpio	= EXYNOS4_GPIO_Y3_NR,
+			.label	= "GPY3",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY4(0),
+			.ngpio	= EXYNOS4_GPIO_Y4_NR,
+			.label	= "GPY4",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY5(0),
+			.ngpio	= EXYNOS4_GPIO_Y5_NR,
+			.label	= "GPY5",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[8],
+		.chip	= {
+			.base	= EXYNOS4_GPY6(0),
+			.ngpio	= EXYNOS4_GPIO_Y6_NR,
+			.label	= "GPY6",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC00),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= EXYNOS4_GPX0(0),
+			.ngpio	= EXYNOS4_GPIO_X0_NR,
+			.label	= "GPX0",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC20),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= EXYNOS4_GPX1(0),
+			.ngpio	= EXYNOS4_GPIO_X1_NR,
+			.label	= "GPX1",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC40),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= EXYNOS4_GPX2(0),
+			.ngpio	= EXYNOS4_GPIO_X2_NR,
+			.label	= "GPX2",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO2 + 0xC60),
+		.config	= &samsung_gpio_cfgs[9],
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= EXYNOS4_GPX3(0),
+			.ngpio	= EXYNOS4_GPIO_X3_NR,
+			.label	= "GPX3",
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip exynos4_gpios_3[] = {
+#ifdef CONFIG_ARCH_EXYNOS4
+	{
+		.chip	= {
+			.base	= EXYNOS4_GPZ(0),
+			.ngpio	= EXYNOS4_GPIO_Z_NR,
+			.label	= "GPZ",
+		},
+	},
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+	struct samsung_gpio_chip *chip;
+	int i, nr_chips;
+	int group = 0;
+
+	samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+
+	if (soc_is_s3c24xx()) {
+		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+	} else if (soc_is_s3c64xx()) {
+		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+				ARRAY_SIZE(s3c64xx_gpios_2bit),
+				S3C64XX_VA_GPIO + 0xE0, 0x20);
+		samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+				ARRAY_SIZE(s3c64xx_gpios_4bit),
+				S3C64XX_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+				ARRAY_SIZE(s3c64xx_gpios_4bit2));
+	} else if (soc_is_s5p6440()) {
+		samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit,
+				ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0);
+		samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit,
+				ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2,
+				ARRAY_SIZE(s5p6440_gpios_4bit2));
+		s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank,
+				ARRAY_SIZE(s5p6440_gpios_rbank));
+	} else if (soc_is_s5p6450()) {
+		samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit,
+				ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0);
+		samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit,
+				ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2,
+				ARRAY_SIZE(s5p6450_gpios_4bit2));
+		s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank,
+				ARRAY_SIZE(s5p6450_gpios_rbank));
+	} else if (soc_is_s5pc100()) {
+		group = 0;
+		chip = s5pc100_gpios_4bit;
+		nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &samsung_gpio_cfgs[3];
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+	} else if (soc_is_s5pv210()) {
+		group = 0;
+		chip = s5pv210_gpios_4bit;
+		nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &samsung_gpio_cfgs[3];
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO);
+#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR);
+#endif
+	} else if (soc_is_exynos4210()) {
+		group = 0;
+
+		/* gpio part1 */
+		chip = exynos4_gpios_1;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_1);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
+
+		/* gpio part2 */
+		chip = exynos4_gpios_2;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_2);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
+
+		/* gpio part3 */
+		chip = exynos4_gpios_3;
+		nr_chips = ARRAY_SIZE(exynos4_gpios_3);
+
+		for (i = 0; i < nr_chips; i++, chip++) {
+			if (!chip->config) {
+				chip->config = &exynos4_gpio_cfg;
+				chip->group = group++;
+			}
+		}
+		samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
+
+#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT)
+		s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+		s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+#endif
+	} else {
+		WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setcfg(chip, offset, config);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg, samsung_gpio_pull_t pull)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		s3c_gpio_setpull(start, pull);
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		ret = samsung_gpio_do_getcfg(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setpull(chip, offset, pull);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	u32 pup = 0;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		pup = samsung_gpio_do_getpull(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+/* gpiolib wrappers until these are totally eliminated */
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+	int ret;
+
+	WARN_ON(to);	/* should be none of these left */
+
+	if (!to) {
+		/* if pull is enabled, try first with up, and if that
+		 * fails, try using down */
+
+		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+		if (ret)
+			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+	} else {
+		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+	}
+}
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+	/* do this via gpiolib until all users removed */
+
+	gpio_request(pin, "temporary");
+	gpio_set_value(pin, to);
+	gpio_free(pin);
+}
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
+
+	return __raw_readl(chip->base + 0x04) & (1 << offs);
+}
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = pin - chip->chip.base;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = pin - chip->chip.base;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif	/* CONFIG_S5P_GPIO_DRVSTR */
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 747eb40e8afe..61044c889f7f 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -20,13 +20,15 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
 
 #include <asm/mach/irq.h>
 
+#include <mach/gpio-tegra.h>
 #include <mach/iomap.h>
 #include <mach/suspend.h>
 
@@ -34,9 +36,7 @@
 #define GPIO_PORT(x)		(((x) >> 3) & 0x3)
 #define GPIO_BIT(x)		((x) & 0x7)
 
-#define GPIO_REG(x)		(IO_TO_VIRT(TEGRA_GPIO_BASE) +	\
-				 GPIO_BANK(x) * 0x80 +		\
-				 GPIO_PORT(x) * 4)
+#define GPIO_REG(x)		(GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4)
 
 #define GPIO_CNF(x)		(GPIO_REG(x) + 0x00)
 #define GPIO_OE(x)		(GPIO_REG(x) + 0x10)
@@ -75,15 +75,18 @@ struct tegra_gpio_bank {
 };
 
 
-static struct tegra_gpio_bank tegra_gpio_banks[] = {
-	{.bank = 0, .irq = INT_GPIO1},
-	{.bank = 1, .irq = INT_GPIO2},
-	{.bank = 2, .irq = INT_GPIO3},
-	{.bank = 3, .irq = INT_GPIO4},
-	{.bank = 4, .irq = INT_GPIO5},
-	{.bank = 5, .irq = INT_GPIO6},
-	{.bank = 6, .irq = INT_GPIO7},
-};
+static void __iomem *regs;
+static struct tegra_gpio_bank tegra_gpio_banks[7];
+
+static inline void tegra_gpio_writel(u32 val, u32 reg)
+{
+	__raw_writel(val, regs + reg);
+}
+
+static inline u32 tegra_gpio_readl(u32 reg)
+{
+	return __raw_readl(regs + reg);
+}
 
 static int tegra_gpio_compose(int bank, int port, int bit)
 {
@@ -97,7 +100,7 @@ static void tegra_gpio_mask_write(u32 reg, int gpio, int value)
 	val = 0x100 << GPIO_BIT(gpio);
 	if (value)
 		val |= 1 << GPIO_BIT(gpio);
-	__raw_writel(val, reg);
+	tegra_gpio_writel(val, reg);
 }
 
 void tegra_gpio_enable(int gpio)
@@ -117,7 +120,7 @@ static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+	return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
 }
 
 static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -134,7 +137,10 @@ static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 	return 0;
 }
 
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return TEGRA_GPIO_TO_IRQ(offset);
+}
 
 static struct gpio_chip tegra_gpio_chip = {
 	.label			= "tegra-gpio",
@@ -142,6 +148,7 @@ static struct gpio_chip tegra_gpio_chip = {
 	.get			= tegra_gpio_get,
 	.direction_output	= tegra_gpio_direction_output,
 	.set			= tegra_gpio_set,
+	.to_irq			= tegra_gpio_to_irq,
 	.base			= 0,
 	.ngpio			= TEGRA_NR_GPIOS,
 };
@@ -150,7 +157,7 @@ static void tegra_gpio_irq_ack(struct irq_data *d)
 {
 	int gpio = d->irq - INT_GPIO_BASE;
 
-	__raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
+	tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
 }
 
 static void tegra_gpio_irq_mask(struct irq_data *d)
@@ -203,10 +210,10 @@ static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 
 	spin_lock_irqsave(&bank->lvl_lock[port], flags);
 
-	val = __raw_readl(GPIO_INT_LVL(gpio));
+	val = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 	val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
 	val |= lvl_type << GPIO_BIT(gpio);
-	__raw_writel(val, GPIO_INT_LVL(gpio));
+	tegra_gpio_writel(val, GPIO_INT_LVL(gpio));
 
 	spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
 
@@ -232,12 +239,12 @@ static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 	for (port = 0; port < 4; port++) {
 		int gpio = tegra_gpio_compose(bank->bank, port, 0);
-		unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
-			__raw_readl(GPIO_INT_ENB(gpio));
-		u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
+		unsigned long sta = tegra_gpio_readl(GPIO_INT_STA(gpio)) &
+			tegra_gpio_readl(GPIO_INT_ENB(gpio));
+		u32 lvl = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 
 		for_each_set_bit(pin, &sta, 8) {
-			__raw_writel(1 << pin, GPIO_INT_CLR(gpio));
+			tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio));
 
 			/* if gpio is edge triggered, clear condition
 			 * before executing the hander so that we don't
@@ -271,11 +278,11 @@ void tegra_gpio_resume(void)
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
 			unsigned int gpio = (b<<5) | (p<<3);
-			__raw_writel(bank->cnf[p], GPIO_CNF(gpio));
-			__raw_writel(bank->out[p], GPIO_OUT(gpio));
-			__raw_writel(bank->oe[p], GPIO_OE(gpio));
-			__raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
-			__raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
+			tegra_gpio_writel(bank->cnf[p], GPIO_CNF(gpio));
+			tegra_gpio_writel(bank->out[p], GPIO_OUT(gpio));
+			tegra_gpio_writel(bank->oe[p], GPIO_OE(gpio));
+			tegra_gpio_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
+			tegra_gpio_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
 		}
 	}
 
@@ -294,11 +301,11 @@ void tegra_gpio_suspend(void)
 
 		for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
 			unsigned int gpio = (b<<5) | (p<<3);
-			bank->cnf[p] = __raw_readl(GPIO_CNF(gpio));
-			bank->out[p] = __raw_readl(GPIO_OUT(gpio));
-			bank->oe[p] = __raw_readl(GPIO_OE(gpio));
-			bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio));
-			bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio));
+			bank->cnf[p] = tegra_gpio_readl(GPIO_CNF(gpio));
+			bank->out[p] = tegra_gpio_readl(GPIO_OUT(gpio));
+			bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
+			bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
+			bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
 		}
 	}
 	local_irq_restore(flags);
@@ -328,38 +335,69 @@ static struct irq_chip tegra_gpio_irq_chip = {
  */
 static struct lock_class_key gpio_lock_class;
 
-static int __init tegra_gpio_init(void)
+static int __devinit tegra_gpio_probe(struct platform_device *pdev)
 {
+	struct resource *res;
 	struct tegra_gpio_bank *bank;
+	int gpio;
 	int i;
 	int j;
 
+	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+		if (!res) {
+			dev_err(&pdev->dev, "Missing IRQ resource\n");
+			return -ENODEV;
+		}
+
+		bank = &tegra_gpio_banks[i];
+		bank->bank = i;
+		bank->irq = res->start;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing MEM resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start,
+				     resource_size(res),
+				     dev_name(&pdev->dev))) {
+		dev_err(&pdev->dev, "Couldn't request MEM resource\n");
+		return -ENODEV;
+	}
+
+	regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "Couldn't ioremap regs\n");
+		return -ENODEV;
+	}
+
 	for (i = 0; i < 7; i++) {
 		for (j = 0; j < 4; j++) {
 			int gpio = tegra_gpio_compose(i, j, 0);
-			__raw_writel(0x00, GPIO_INT_ENB(gpio));
+			tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
 		}
 	}
 
 #ifdef CONFIG_OF_GPIO
-	/*
-	 * This isn't ideal, but it gets things hooked up until this
-	 * driver is converted into a platform_device
-	 */
-	tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
-						"nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
+	tegra_gpio_chip.of_node = pdev->dev.of_node;
+#endif
 
 	gpiochip_add(&tegra_gpio_chip);
 
-	for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
-		bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+	for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+		int irq = TEGRA_GPIO_TO_IRQ(gpio);
+		/* No validity check; all Tegra GPIOs are valid IRQs */
 
-		irq_set_lockdep_class(i, &gpio_lock_class);
-		irq_set_chip_data(i, bank);
-		irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+		bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
+
+		irq_set_lockdep_class(irq, &gpio_lock_class);
+		irq_set_chip_data(irq, bank);
+		irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
 					 handle_simple_irq);
-		set_irq_flags(i, IRQF_VALID);
+		set_irq_flags(irq, IRQF_VALID);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
@@ -375,6 +413,24 @@ static int __init tegra_gpio_init(void)
 	return 0;
 }
 
+static struct of_device_id tegra_gpio_of_match[] __devinitdata = {
+	{ .compatible = "nvidia,tegra20-gpio", },
+	{ },
+};
+
+static struct platform_driver tegra_gpio_driver = {
+	.driver		= {
+		.name	= "tegra-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = tegra_gpio_of_match,
+	},
+	.probe		= tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+	return platform_driver_register(&tegra_gpio_driver);
+}
 postcore_initcall(tegra_gpio_init);
 
 void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
@@ -407,13 +463,13 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 			seq_printf(s,
 				"%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
 				i, j,
-				__raw_readl(GPIO_CNF(gpio)),
-				__raw_readl(GPIO_OE(gpio)),
-				__raw_readl(GPIO_OUT(gpio)),
-				__raw_readl(GPIO_IN(gpio)),
-				__raw_readl(GPIO_INT_STA(gpio)),
-				__raw_readl(GPIO_INT_ENB(gpio)),
-				__raw_readl(GPIO_INT_LVL(gpio)));
+				tegra_gpio_readl(GPIO_CNF(gpio)),
+				tegra_gpio_readl(GPIO_OE(gpio)),
+				tegra_gpio_readl(GPIO_OUT(gpio)),
+				tegra_gpio_readl(GPIO_IN(gpio)),
+				tegra_gpio_readl(GPIO_INT_STA(gpio)),
+				tegra_gpio_readl(GPIO_INT_ENB(gpio)),
+				tegra_gpio_readl(GPIO_INT_LVL(gpio)));
 		}
 	}
 	return 0;
diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
new file mode 100644
index 000000000000..3fa3e2867e19
--- /dev/null
+++ b/drivers/gpio/gpio-tnetv107x.c
@@ -0,0 +1,205 @@
+/*
+ * Texas Instruments TNETV107X GPIO Controller
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <mach/common.h>
+#include <mach/tnetv107x.h>
+
+struct tnetv107x_gpio_regs {
+	u32	idver;
+	u32	data_in[3];
+	u32	data_out[3];
+	u32	direction[3];
+	u32	enable[3];
+};
+
+#define gpio_reg_index(gpio)	((gpio) >> 5)
+#define gpio_reg_bit(gpio)	BIT((gpio) & 0x1f)
+
+#define gpio_reg_rmw(reg, mask, val)	\
+	__raw_writel((__raw_readl(reg) & ~(mask)) | (val), (reg))
+
+#define gpio_reg_set_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), 0, gpio_reg_bit(gpio))
+
+#define gpio_reg_clear_bit(reg, gpio)	\
+	gpio_reg_rmw((reg) + gpio_reg_index(gpio), gpio_reg_bit(gpio), 0)
+
+#define gpio_reg_get_bit(reg, gpio)	\
+	(__raw_readl((reg) + gpio_reg_index(gpio)) & gpio_reg_bit(gpio))
+
+#define chip2controller(chip)		\
+	container_of(chip, struct davinci_gpio_controller, chip)
+
+#define TNETV107X_GPIO_CTLRS	DIV_ROUND_UP(TNETV107X_N_GPIO, 32)
+
+static struct davinci_gpio_controller chips[TNETV107X_GPIO_CTLRS];
+
+static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_clear_bit(regs->enable, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	gpio_reg_set_bit(regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(regs->data_out, gpio);
+
+	gpio_reg_clear_bit(regs->direction, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+
+	return 0;
+}
+
+static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	int ret;
+
+	ret = gpio_reg_get_bit(regs->data_in, gpio);
+
+	return ret ? 1 : 0;
+}
+
+static void tnetv107x_gpio_set(struct gpio_chip *chip,
+		unsigned offset, int value)
+{
+	struct davinci_gpio_controller *ctlr = chip2controller(chip);
+	struct tnetv107x_gpio_regs __iomem *regs = ctlr->regs;
+	unsigned gpio = chip->base + offset;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
+	if (value)
+		gpio_reg_set_bit(regs->data_out, gpio);
+	else
+		gpio_reg_clear_bit(regs->data_out, gpio);
+
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static int __init tnetv107x_gpio_setup(void)
+{
+	int i, base;
+	unsigned ngpio;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct tnetv107x_gpio_regs *regs;
+	struct davinci_gpio_controller *ctlr;
+
+	if (soc_info->gpio_type != GPIO_TYPE_TNETV107X)
+		return 0;
+
+	ngpio = soc_info->gpio_num;
+	if (ngpio == 0) {
+		pr_err("GPIO setup:  how many GPIOs?\n");
+		return -EINVAL;
+	}
+
+	if (WARN_ON(TNETV107X_N_GPIO < ngpio))
+		ngpio = TNETV107X_N_GPIO;
+
+	regs = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!regs))
+		return -EINVAL;
+
+	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
+		ctlr = &chips[i];
+
+		ctlr->chip.label	= "tnetv107x";
+		ctlr->chip.can_sleep	= 0;
+		ctlr->chip.base		= base;
+		ctlr->chip.ngpio	= ngpio - base;
+		if (ctlr->chip.ngpio > 32)
+			ctlr->chip.ngpio = 32;
+
+		ctlr->chip.request		= tnetv107x_gpio_request;
+		ctlr->chip.free			= tnetv107x_gpio_free;
+		ctlr->chip.direction_input	= tnetv107x_gpio_dir_in;
+		ctlr->chip.get			= tnetv107x_gpio_get;
+		ctlr->chip.direction_output	= tnetv107x_gpio_dir_out;
+		ctlr->chip.set			= tnetv107x_gpio_set;
+
+		spin_lock_init(&ctlr->lock);
+
+		ctlr->regs	= regs;
+		ctlr->set_data	= &regs->data_out[i];
+		ctlr->clr_data	= &regs->data_out[i];
+		ctlr->in_data	= &regs->data_in[i];
+
+		gpiochip_add(&ctlr->chip);
+	}
+
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+	return 0;
+}
+pure_initcall(tnetv107x_gpio_setup);
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
index 53e8255cb0ba..4035778852b0 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/gpio/gpio-u300.c
@@ -1,18 +1,17 @@
 /*
  * U300 GPIO module.
  *
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * This can driver either of the two basic GPIO cores
  * available in the U300 platforms:
  * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
  * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
  */
 #include <linux/module.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -21,677 +20,898 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
 
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ *	is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ *	impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN	0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT	0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP	0x1002
 
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ *	low, this is the most typical case and is typically achieved with two
+ *	active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ *	(open collector) which means it is usually wired with other output
+ *	ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ *	(open emitter) which is the same as open drain mutatis mutandis but
+ *	pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL	0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN	0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE	0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR					(0x00)
+#define U300_335_PXPDOR					(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR					(0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV					(0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN					(0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR					(0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR					(0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER					(0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR					(0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE				(0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR					(0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR					(0x04)
+#define U300_571_PXPDOR					(0x08)
+#define U300_571_PXPCR					(0x0C)
+#define U300_571_PXPER					(0x10)
+#define U300_571_PXIEV					(0x14)
+#define U300_571_PXIEN					(0x18)
+#define U300_571_PXIFR					(0x1C)
+#define U300_571_PXICR					(0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+	struct gpio_chip chip;
+	struct list_head port_list;
+	struct clk *clk;
+	struct resource *memres;
+	void __iomem *base;
+	struct device *dev;
+	int irq_base;
+	u32 stride;
+	/* Register offsets */
+	u32 pcr;
+	u32 dor;
+	u32 dir;
+	u32 per;
+	u32 icr;
+	u32 ien;
+	u32 iev;
+};
 
 struct u300_gpio_port {
-	const char *name;
+	struct list_head node;
+	struct u300_gpio *gpio;
+	char name[8];
 	int irq;
 	int number;
+	u8 toggle_edge_mode;
 };
 
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+	(gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
 
-static struct u300_gpio_port gpio_ports[] = {
-	{
-		.name = "gpio0",
-		.number = 0,
-	},
-	{
-		.name = "gpio1",
-		.number = 1,
-	},
-	{
-		.name = "gpio2",
-		.number = 2,
-	},
-#ifdef U300_COH901571_3
-	{
-		.name = "gpio3",
-		.number = 3,
-	},
-	{
-		.name = "gpio4",
-		.number = 4,
-	},
-#ifdef CONFIG_MACH_U300_BS335
-	{
-		.name = "gpio5",
-		.number = 5,
-	},
-	{
-		.name = "gpio6",
-		.number = 6,
-	},
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+	(1 << (pin & 0x07))
 
+struct u300_gpio_confdata {
+	u16 bias_mode;
+	bool output;
+	int outval;
 };
 
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
 
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+	.bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+	.output = false, \
+}
 
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW   0
-#define DEFAULT_OUTPUT_HIGH  1
+#define U300_PULL_UP_INPUT { \
+	.bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+	.output = false, \
+}
 
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP  0
-#define ENABLE_PULL_UP  1
+#define U300_OUTPUT_LOW { \
+	.output = true, \
+	.outval = 0, \
+}
 
-#define GPIO_NOT_USED 0
-#define GPIO_IN       1
-#define GPIO_OUT      2
+#define U300_OUTPUT_HIGH { \
+	.output = true, \
+	.outval = 1, \
+}
 
-struct u300_gpio_configuration_data {
-	unsigned char pin_usage;
-	unsigned char default_output_value;
-	unsigned char pull_up;
-};
 
 /* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 1, pins 0-7 */
 	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 2, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 3, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 4, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 5, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 6, pind 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	}
-#endif
+};
 
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 1, pins 0-7 */
 	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 2, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 3, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 4, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 		/* These 4 pins doesn't exist on DB3210 */
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	}
-#endif
 };
-#endif
 
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
-	int (*callback)(void *);
-	void *data;
-	int users;
-};
-
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
  */
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
 {
-	if (gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "registered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = func;
-	gpio_pin[gpio].data = data;
-
-	return 0;
+	return container_of(chip, struct u300_gpio, chip);
 }
-EXPORT_SYMBOL(gpio_register_callback);
 
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	if (!gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "unregistered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = NULL;
-	gpio_pin[gpio].data = NULL;
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 
-	return 0;
+	return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
 }
-EXPORT_SYMBOL(gpio_unregister_callback);
 
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	if (number >= 0 &&
-	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
-		return 1;
-	return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	unsigned long flags;
+	u32 val;
 
-int gpio_request(unsigned gpio, const char *label)
-{
-	if (gpio_pin[gpio].users)
-		return -EINVAL;
-	else
-		gpio_pin[gpio].users++;
+	local_irq_save(flags);
 
-	gpio_users++;
+	val = readl(U300_PIN_REG(offset, dor));
+	if (value)
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
+	else
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
 
-	return 0;
+	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	gpio_users--;
-	gpio_pin[gpio].users--;
-	if (unlikely(gpio_pin[gpio].users < 0)) {
-		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
-			 gpio);
-		gpio_pin[gpio].users = 0;
-	}
-
-	return;
-}
-EXPORT_SYMBOL(gpio_free);
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	unsigned long flags;
+	u32 val;
 
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
-	return readl(virtbase + U300_GPIO_PXPDIR +
-	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
+	local_irq_save(flags);
+	val = readl(U300_PIN_REG(offset, pcr));
+	/* Mask out this pin, note 2 bits per setting */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+	writel(val, U300_PIN_REG(offset, pcr));
+	local_irq_restore(flags);
+	return 0;
 }
-EXPORT_SYMBOL(gpio_get_value);
 
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
 {
-	u32 val;
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 	unsigned long flags;
+	u32 oldmode;
+	u32 val;
 
 	local_irq_save(flags);
-	if (value) {
-		/* set */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val | (1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		/* clear */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val & ~(1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
+	val = readl(U300_PIN_REG(offset, pcr));
+	/*
+	 * Drive mode must be set by the special mode set function, set
+	 * push/pull mode by default if no mode has been selected.
+	 */
+	oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+			 ((offset & 0x07) << 1));
+	/* mode = 0 means input, else some mode is already set */
+	if (oldmode == 0) {
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+			 ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
 	}
+	u300_gpio_set(chip, offset, value);
 	local_irq_restore(flags);
+	return 0;
 }
-EXPORT_SYMBOL(gpio_set_value);
 
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	int retirq = gpio->irq_base + offset;
+
+	dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+		retirq);
+	return retirq;
+}
+
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+		     u16 param, unsigned long *data)
+{
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 	unsigned long flags;
 	u32 val;
 
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
 	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin*/
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
-	/* This is not needed since it sets the bits to zero.*/
-	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
+	switch (param) {
+	case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+	case GPIO_U300_CONFIG_BIAS_FLOAT:
+		val = readl(U300_PIN_REG(offset, per));
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+		break;
+	case GPIO_U300_CONFIG_BIAS_PULL_UP:
+		val = readl(U300_PIN_REG(offset, per));
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	default:
+		local_irq_restore(flags);
+		dev_err(gpio->dev, "illegal configuration requested\n");
+		return -EINVAL;
+	}
 	local_irq_restore(flags);
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned gpio, int value)
+static struct gpio_chip u300_gpio_chip = {
+	.label			= "u300-gpio-chip",
+	.owner			= THIS_MODULE,
+	.get			= u300_gpio_get,
+	.set			= u300_gpio_set,
+	.direction_input	= u300_gpio_direction_input,
+	.direction_output	= u300_gpio_direction_output,
+	.to_irq			= u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
 {
-	unsigned long flags;
 	u32 val;
 
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin */
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
-	/*
-	 * FIXME: configure for push/pull, open drain or open source per pin
-	 * in setup. The current driver will only support push/pull.
-	 */
-	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
-			<< ((gpio & 0x07) << 1));
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	gpio_set_value(gpio, value);
-	local_irq_restore(flags);
-	return 0;
+	val = readl(U300_PIN_REG(offset, icr));
+	/* Set mode depending on state */
+	if (u300_gpio_get(&gpio->chip, offset)) {
+		/* High now, let's trigger on falling edge next then */
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+			offset);
+	} else {
+		/* Low now, let's trigger on rising edge next then */
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+			offset);
+	}
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
 {
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
 	u32 val;
-	unsigned long flags;
-	local_irq_save(flags);
 
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val |= (1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	if (edge)
-		val |= (1 << (gpio & 0x07));
-	else
-		val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	local_irq_restore(flags);
+	if ((trigger & IRQF_TRIGGER_RISING) &&
+	    (trigger & IRQF_TRIGGER_FALLING)) {
+		/*
+		 * The GPIO block can only trigger on falling OR rising edges,
+		 * not both. So we need to toggle the mode whenever the pin
+		 * goes from one state to the other with a special state flag
+		 */
+		dev_dbg(gpio->dev,
+			"trigger on both rising and falling edge on pin %d\n",
+			offset);
+		port->toggle_edge_mode |= U300_PIN_BIT(offset);
+		u300_toggle_trigger(gpio, offset);
+	} else if (trigger & IRQF_TRIGGER_RISING) {
+		dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+			offset);
+		val = readl(U300_PIN_REG(offset, icr));
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+	} else if (trigger & IRQF_TRIGGER_FALLING) {
+		dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+			offset);
+		val = readl(U300_PIN_REG(offset, icr));
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+	}
+
+	return 0;
 }
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
 
-void disable_irq_on_gpio_pin(unsigned gpio)
+static void u300_gpio_irq_enable(struct irq_data *d)
 {
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
 	u32 val;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
+	val = readl(U300_PIN_REG(offset, ien));
+	writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
 
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
+static void u300_gpio_irq_disable(struct irq_data *d)
 {
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
 	u32 val;
 	unsigned long flags;
 
 	local_irq_save(flags);
-	if (value) {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	}
+	val = readl(U300_PIN_REG(offset, ien));
+	writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_pullup);
 
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
+static struct irq_chip u300_gpio_irqchip = {
+	.name			= "u300-gpio-irqchip",
+	.irq_enable		= u300_gpio_irq_enable,
+	.irq_disable		= u300_gpio_irq_disable,
+	.irq_set_type		= u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct u300_gpio_port *port = dev_id;
-	u32 val;
-	int pin;
+	struct u300_gpio_port *port = irq_get_handler_data(irq);
+	struct u300_gpio *gpio = port->gpio;
+	int pinoffset = port->number << 3; /* get the right stride */
+	unsigned long val;
 
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
 	/* Read event register */
-	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask with enable register */
-	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
+	val = readl(U300_PIN_REG(pinoffset, iev));
 	/* Mask relevant bits */
-	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
+	val &= 0xFFU; /* 8 bits per port */
 	/* ACK IRQ (clear event) */
-	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Print message */
-	while (val != 0) {
-		unsigned gpio;
-
-		pin = __ffs(val);
-		/* mask off this pin */
-		val &= ~(1 << pin);
-		gpio = (port->number << 3) + pin;
-
-		if (gpio_pin[gpio].callback)
-			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
-		else
-			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
-			       gpio);
+	writel(val, U300_PIN_REG(pinoffset, iev));
+
+	/* Call IRQ handler */
+	if (val != 0) {
+		int irqoffset;
+
+		for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+			int pin_irq = gpio->irq_base + (port->number << 3)
+				+ irqoffset;
+			int offset = pinoffset + irqoffset;
+
+			dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+				pin_irq, offset);
+			generic_handle_irq(pin_irq);
+			/*
+			 * Triggering IRQ on both rising and falling edge
+			 * needs mockery
+			 */
+			if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+				u300_toggle_trigger(gpio, offset);
+		}
 	}
-	return IRQ_HANDLED;
+
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
 }
 
-static void gpio_set_initial_values(void)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+				      int offset,
+				      const struct u300_gpio_confdata *conf)
 {
-#ifdef U300_COH901571_3
-	int i, j;
-	unsigned long flags;
-	u32 val;
+	/* Set mode: input or output */
+	if (conf->output) {
+		u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
 
-	/* Write default values to all pins */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
-		local_irq_restore(flags);
+		/* Deactivate bias mode for output */
+		u300_gpio_config(&gpio->chip, offset,
+				 GPIO_U300_CONFIG_BIAS_FLOAT,
+				 NULL);
+
+		/* Set drive mode for output */
+		u300_gpio_config(&gpio->chip, offset,
+				 GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+		dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+			offset, conf->outval);
+	} else {
+		u300_gpio_direction_input(&gpio->chip, offset);
+
+		/* Always set output low on input pins */
+		u300_gpio_set(&gpio->chip, offset, 0);
+
+		/* Set bias mode for input */
+		u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+		dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+			offset, conf->bias_mode);
 	}
+}
 
-	/*
-	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
-	 * to output and 'GPIO_IN' to input for each port. And initialize
-	 * default value on outputs.
-	 */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
-			local_irq_save(flags);
-			val = readl(virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			/* Mask out this pin */
-			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
-
-			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
-				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
-			writel(val, virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			local_irq_restore(flags);
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+				     struct u300_gpio_platform *plat)
+{
+	int i, j;
+
+	/* Write default config and values to all pins */
+	for (i = 0; i < plat->ports; i++) {
+		for (j = 0; j < 8; j++) {
+			const struct u300_gpio_confdata *conf;
+			int offset = (i*8) + j;
+
+			if (plat->variant == U300_GPIO_COH901571_3_BS335)
+				conf = &bs335_gpio_config[i][j];
+			else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+				conf = &bs365_gpio_config[i][j];
+			else
+				break;
+
+			u300_gpio_init_pin(gpio, offset, conf);
 		}
 	}
+}
 
-	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
-	for (i = 0; i < U300_GPIO_MAX; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
-		local_irq_restore(flags);
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+	struct u300_gpio_port *port;
+	struct list_head *p, *n;
+
+	list_for_each_safe(p, n, &gpio->port_list) {
+		port = list_entry(p, struct u300_gpio_port, node);
+		list_del(&port->node);
+		free_irq(port->irq, port);
+		kfree(port);
 	}
-#endif
 }
 
-static int __init gpio_probe(struct platform_device *pdev)
+static int __init u300_gpio_probe(struct platform_device *pdev)
 {
-	u32 val;
+	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+	struct u300_gpio *gpio;
 	int err = 0;
+	int portno;
+	u32 val;
+	u32 ifr;
 	int i;
-	int num_irqs;
 
-	gpiodev = &pdev->dev;
-	memset(gpio_pin, 0, sizeof(gpio_pin));
+	gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+	if (gpio == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	gpio->chip = u300_gpio_chip;
+	gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+	gpio->irq_base = plat->gpio_irq_base;
+	gpio->chip.dev = &pdev->dev;
+	gpio->chip.base = plat->gpio_base;
+	gpio->dev = &pdev->dev;
 
 	/* Get GPIO clock */
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		err = PTR_ERR(clk);
-		dev_err(gpiodev, "could not get GPIO clock\n");
+	gpio->clk = clk_get(gpio->dev, NULL);
+	if (IS_ERR(gpio->clk)) {
+		err = PTR_ERR(gpio->clk);
+		dev_err(gpio->dev, "could not get GPIO clock\n");
 		goto err_no_clk;
 	}
-	err = clk_enable(clk);
+	err = clk_enable(gpio->clk);
 	if (err) {
-		dev_err(gpiodev, "could not enable GPIO clock\n");
+		dev_err(gpio->dev, "could not enable GPIO clock\n");
 		goto err_no_clk_enable;
 	}
 
-	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!memres)
+	gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!gpio->memres) {
+		dev_err(gpio->dev, "could not get GPIO memory resource\n");
+		err = -ENODEV;
 		goto err_no_resource;
+	}
 
-	if (!request_mem_region(memres->start, resource_size(memres),
+	if (!request_mem_region(gpio->memres->start,
+				resource_size(gpio->memres),
 				"GPIO Controller")) {
 		err = -ENODEV;
 		goto err_no_ioregion;
 	}
 
-	virtbase = ioremap(memres->start, resource_size(memres));
-	if (!virtbase) {
+	gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+	if (!gpio->base) {
 		err = -ENOMEM;
 		goto err_no_ioremap;
 	}
-	dev_info(gpiodev, "remapped 0x%08x to %p\n",
-		 memres->start, virtbase);
-
-#ifdef U300_COH901335
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
-	/* Turn on the GPIO block */
-	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-#ifdef U300_COH901571_3
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
-	val = readl(virtbase + U300_GPIO_CR);
-	dev_info(gpiodev, "COH901571/3 block version: %d, " \
-	       "number of cores: %d\n",
-	       ((val & 0x0000FE00) >> 9),
-	       ((val & 0x000001FC) >> 2));
-	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
-
-	gpio_set_initial_values();
-
-	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
-		gpio_ports[num_irqs].irq =
-			platform_get_irq_byname(pdev,
-						gpio_ports[num_irqs].name);
-
-		err = request_irq(gpio_ports[num_irqs].irq,
-				  gpio_irq_handler, IRQF_DISABLED,
-				  gpio_ports[num_irqs].name,
-				  &gpio_ports[num_irqs]);
-		if (err) {
-			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
-				gpio_ports[num_irqs].name);
-			goto err_no_irq;
+
+	if (plat->variant == U300_GPIO_COH901335) {
+		dev_info(gpio->dev,
+			 "initializing GPIO Controller COH 901 335\n");
+		gpio->stride = U300_335_PORT_STRIDE;
+		gpio->pcr = U300_335_PXPCR;
+		gpio->dor = U300_335_PXPDOR;
+		gpio->dir = U300_335_PXPDIR;
+		gpio->per = U300_335_PXPER;
+		gpio->icr = U300_335_PXICR;
+		gpio->ien = U300_335_PXIEN;
+		gpio->iev = U300_335_PXIEV;
+		ifr = U300_335_PXIFR;
+
+		/* Turn on the GPIO block */
+		writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+		       gpio->base + U300_335_CR);
+	} else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+		   plat->variant == U300_GPIO_COH901571_3_BS365) {
+		dev_info(gpio->dev,
+			 "initializing GPIO Controller COH 901 571/3\n");
+		gpio->stride = U300_571_PORT_STRIDE;
+		gpio->pcr = U300_571_PXPCR;
+		gpio->dor = U300_571_PXPDOR;
+		gpio->dir = U300_571_PXPDIR;
+		gpio->per = U300_571_PXPER;
+		gpio->icr = U300_571_PXICR;
+		gpio->ien = U300_571_PXIEN;
+		gpio->iev = U300_571_PXIEV;
+		ifr = U300_571_PXIFR;
+
+		val = readl(gpio->base + U300_571_CR);
+		dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+			 "number of cores: %d totalling %d pins\n",
+			 ((val & 0x000001FC) >> 2),
+			 ((val & 0x0000FE00) >> 9),
+			 ((val & 0x0000FE00) >> 9) * 8);
+		writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+		       gpio->base + U300_571_CR);
+		u300_gpio_init_coh901571(gpio, plat);
+	} else {
+		dev_err(gpio->dev, "unknown block variant\n");
+		err = -ENODEV;
+		goto err_unknown_variant;
+	}
+
+	/* Add each port with its IRQ separately */
+	INIT_LIST_HEAD(&gpio->port_list);
+	for (portno = 0 ; portno < plat->ports; portno++) {
+		struct u300_gpio_port *port =
+			kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+		if (!port) {
+			dev_err(gpio->dev, "out of memory\n");
+			err = -ENOMEM;
+			goto err_no_port;
 		}
-		/* Turns off PortX_irq_force */
-		writel(0x0, virtbase + U300_GPIO_PXIFR +
-				 num_irqs * U300_GPIO_PORTX_SPACING);
+
+		snprintf(port->name, 8, "gpio%d", portno);
+		port->number = portno;
+		port->gpio = gpio;
+
+		port->irq = platform_get_irq_byname(pdev,
+						    port->name);
+
+		dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+			port->name);
+
+		irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+		irq_set_handler_data(port->irq, port);
+
+		/* For each GPIO pin set the unique IRQ handler */
+		for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+			int irqno = gpio->irq_base + (portno << 3) + i;
+
+			dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+				irqno, port->name);
+			irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+						 handle_simple_irq);
+			set_irq_flags(irqno, IRQF_VALID);
+			irq_set_chip_data(irqno, port);
+		}
+
+		/* Turns off irq force (test register) for this port */
+		writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+		list_add_tail(&port->node, &gpio->port_list);
 	}
+	dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+	err = gpiochip_add(&gpio->chip);
+	if (err) {
+		dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+		goto err_no_chip;
+	}
+
+	platform_set_drvdata(pdev, gpio);
 
 	return 0;
 
- err_no_irq:
-	for (i = 0; i < num_irqs; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
- err_no_ioremap:
-	release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
-	clk_disable(clk);
- err_no_clk_enable:
-	clk_put(clk);
- err_no_clk:
-	dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+	u300_gpio_free_ports(gpio);
+err_unknown_variant:
+	iounmap(gpio->base);
+err_no_ioremap:
+	release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+	clk_disable(gpio->clk);
+err_no_clk_enable:
+	clk_put(gpio->clk);
+err_no_clk:
+	kfree(gpio);
+	dev_info(&pdev->dev, "module ERROR:%d\n", err);
 	return err;
 }
 
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
 {
-	int i;
+	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+	struct u300_gpio *gpio = platform_get_drvdata(pdev);
+	int err;
 
 	/* Turn off the GPIO block */
-	writel(0x00000000U, virtbase + U300_GPIO_CR);
-	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
-	release_mem_region(memres->start, resource_size(memres));
-	clk_disable(clk);
-	clk_put(clk);
+	if (plat->variant == U300_GPIO_COH901335)
+		writel(0x00000000U, gpio->base + U300_335_CR);
+	if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+	    plat->variant == U300_GPIO_COH901571_3_BS365)
+		writel(0x00000000U, gpio->base + U300_571_CR);
+
+	err = gpiochip_remove(&gpio->chip);
+	if (err < 0) {
+		dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+		return err;
+	}
+	u300_gpio_free_ports(gpio);
+	iounmap(gpio->base);
+	release_mem_region(gpio->memres->start,
+			   resource_size(gpio->memres));
+	clk_disable(gpio->clk);
+	clk_put(gpio->clk);
+	platform_set_drvdata(pdev, NULL);
+	kfree(gpio);
 	return 0;
 }
 
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
 	.driver		= {
 		.name	= "u300-gpio",
 	},
-	.remove		= __exit_p(gpio_remove),
+	.remove		= __exit_p(u300_gpio_remove),
 };
 
 
 static int __init u300_gpio_init(void)
 {
-	return platform_driver_probe(&gpio_driver, gpio_probe);
+	return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
 }
 
 static void __exit u300_gpio_exit(void)
 {
-	platform_driver_unregister(&gpio_driver);
+	platform_driver_unregister(&u300_gpio_driver);
 }
 
 arch_initcall(u300_gpio_init);
 module_exit(u300_gpio_exit);
 
 MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 846fbd5e31bf..0ce6ac9898b1 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -14,6 +14,7 @@
 
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>