Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - "genirq: Introduce generic irq migration for cpu hotunplugged" patch
   merged from tip/irq/for-arm to allow the arm64-specific part to be
   upstreamed via the arm64 tree

 - CPU feature detection reworked to cope with heterogeneous systems
   where CPUs may not have exactly the same features.  The features
   reported by the kernel via internal data structures or ELF_HWCAP are
   delayed until all the CPUs are up (and before user space starts)

 - Support for 16KB pages, with the additional bonus of a 36-bit VA
   space, though the latter only depending on EXPERT

 - Implement native {relaxed, acquire, release} atomics for arm64

 - New ASID allocation algorithm which avoids IPI on roll-over, together
   with TLB invalidation optimisations (using local vs global where
   feasible)

 - KASan support for arm64

 - EFI_STUB clean-up and isolation for the kernel proper (required by
   KASan)

 - copy_{to,from,in}_user optimisations (sharing the memcpy template)

 - perf: moving arm64 to the arm32/64 shared PMU framework

 - L1_CACHE_BYTES increased to 128 to accommodate Cavium hardware

 - Support for the contiguous PTE hint on kernel mapping (16 consecutive
   entries may be able to use a single TLB entry)

 - Generic CONFIG_HZ now used on arm64

 - defconfig updates

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (91 commits)
  arm64/efi: fix libstub build under CONFIG_MODVERSIONS
  ARM64: Enable multi-core scheduler support by default
  arm64/efi: move arm64 specific stub C code to libstub
  arm64: page-align sections for DEBUG_RODATA
  arm64: Fix build with CONFIG_ZONE_DMA=n
  arm64: Fix compat register mappings
  arm64: Increase the max granular size
  arm64: remove bogus TASK_SIZE_64 check
  arm64: make Timer Interrupt Frequency selectable
  arm64/mm: use PAGE_ALIGNED instead of IS_ALIGNED
  arm64: cachetype: fix definitions of ICACHEF_* flags
  arm64: cpufeature: declare enable_cpu_capabilities as static
  genirq: Make the cpuhotplug migration code less noisy
  arm64: Constify hwcap name string arrays
  arm64/kvm: Make use of the system wide safe values
  arm64/debug: Make use of the system wide safe value
  arm64: Move FP/ASIMD hwcap handling to common code
  arm64/HWCAP: Use system wide safe values
  arm64/capabilities: Make use of system wide safe value
  arm64: Delay cpu feature capability checks
  ...

1 files changed, 78 insertions, 0 deletions

diff --git a/drivers/firmware/efi/libstub/arm64-stub.c b/drivers/firmware/efi/libstub/arm64-stub.c
new file mode 100644
index 000000000000..78dfbd34b6bf
--- /dev/null
+++ b/drivers/firmware/efi/libstub/arm64-stub.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2013, 2014 Linaro Ltd;  <roy.franz@linaro.org>
+ *
+ * This file implements the EFI boot stub for the arm64 kernel.
+ * Adapted from ARM version by Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/efi.h>
+#include <asm/efi.h>
+#include <asm/sections.h>
+
+efi_status_t __init handle_kernel_image(efi_system_table_t *sys_table_arg,
+					unsigned long *image_addr,
+					unsigned long *image_size,
+					unsigned long *reserve_addr,
+					unsigned long *reserve_size,
+					unsigned long dram_base,
+					efi_loaded_image_t *image)
+{
+	efi_status_t status;
+	unsigned long kernel_size, kernel_memsize = 0;
+	unsigned long nr_pages;
+	void *old_image_addr = (void *)*image_addr;
+	unsigned long preferred_offset;
+
+	/*
+	 * The preferred offset of the kernel Image is TEXT_OFFSET bytes beyond
+	 * a 2 MB aligned base, which itself may be lower than dram_base, as
+	 * long as the resulting offset equals or exceeds it.
+	 */
+	preferred_offset = round_down(dram_base, SZ_2M) + TEXT_OFFSET;
+	if (preferred_offset < dram_base)
+		preferred_offset += SZ_2M;
+
+	/* Relocate the image, if required. */
+	kernel_size = _edata - _text;
+	if (*image_addr != preferred_offset) {
+		kernel_memsize = kernel_size + (_end - _edata);
+
+		/*
+		 * First, try a straight allocation at the preferred offset.
+		 * This will work around the issue where, if dram_base == 0x0,
+		 * efi_low_alloc() refuses to allocate at 0x0 (to prevent the
+		 * address of the allocation to be mistaken for a FAIL return
+		 * value or a NULL pointer). It will also ensure that, on
+		 * platforms where the [dram_base, dram_base + TEXT_OFFSET)
+		 * interval is partially occupied by the firmware (like on APM
+		 * Mustang), we can still place the kernel at the address
+		 * 'dram_base + TEXT_OFFSET'.
+		 */
+		*image_addr = *reserve_addr = preferred_offset;
+		nr_pages = round_up(kernel_memsize, EFI_ALLOC_ALIGN) /
+			   EFI_PAGE_SIZE;
+		status = efi_call_early(allocate_pages, EFI_ALLOCATE_ADDRESS,
+					EFI_LOADER_DATA, nr_pages,
+					(efi_physical_addr_t *)reserve_addr);
+		if (status != EFI_SUCCESS) {
+			kernel_memsize += TEXT_OFFSET;
+			status = efi_low_alloc(sys_table_arg, kernel_memsize,
+					       SZ_2M, reserve_addr);
+
+			if (status != EFI_SUCCESS) {
+				pr_efi_err(sys_table_arg, "Failed to relocate kernel\n");
+				return status;
+			}
+			*image_addr = *reserve_addr + TEXT_OFFSET;
+		}
+		memcpy((void *)*image_addr, old_image_addr, kernel_size);
+		*reserve_size = kernel_memsize;
+	}
+
+
+	return EFI_SUCCESS;
+}