Merge tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Only one framework update this time around, a change from Lars-Peter
  to move full to pm_ops and remove the legacy bus PM ops.  Otherwise
  it's all driver updates:

   - make the spidev driver complain loudly if registered as spidev with
     DT rather than with a compatible string, hopefully helping people
     avoid making that mistake.

   - error handling and robustness fixes for the Designware and Intel
     MID drivers from Andy Shevchenko.

   - substantial performance improvements for the Raspberry Pi driver
     from Martin Sperl.

   - several new features for spidev_test from Adrian Remonda and Ian
     Abbott"

* tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits)
  spi: bcm2835: enabling polling mode for transfers shorter than 30us
  spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
  spi: img-spfi: Control CS lines with GPIO
  spi: img-spfi: Reset controller after each message
  spi: img-spfi: Implement a handle_err() callback
  spi: img-spfi: Setup TRANSACTION register before CONTROL register
  spi: Make master->handle_err() callback optional to avoid crashes
  spi: img-spfi: Limit bit clock to 1/4th of input clock
  spi: img-spfi: Implement a prepare_message() callback
  spi: fsl-dspi: Add ~50ns delay between cs and sck
  spi: fsl-dspi: Add cs-sck delays
  spi: fsl-dspi: Fix clock rate scale values
  spi: signedness bug in qspi_trigger_transfer_out_int()
  spi: imx: read back the RX/TX watermark levels earlier
  spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers()
  spi: bitbang: only toggle bitchanges
  spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
  spi: fsl-dspi: Fix clock rate scale values
  spi: Using Trigger number to transmit/receive data
  spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message
  ...

4 files changed, 0 insertions, 1760 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index a874b6ec6650..942ca541dcbd 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -51,19 +51,6 @@ config INTEL_MIC_X100_DMA
 	  OS and tools for MIC to use with this driver are available from
 	  <http://software.intel.com/en-us/mic-developer>.
 
-config INTEL_MID_DMAC
-	tristate "Intel MID DMA support for Peripheral DMA controllers"
-	depends on PCI && X86
-	select DMA_ENGINE
-	default n
-	help
-	  Enable support for the Intel(R) MID DMA engine present
-	  in Intel MID chipsets.
-
-	  Say Y here if you have such a chipset.
-
-	  If unsure, say N.
-
 config ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index f915f61ec574..539d4825bd76 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
 obj-$(CONFIG_DMA_ACPI) += acpi-dma.o
 obj-$(CONFIG_DMA_OF) += of-dma.o
 
-obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o
 obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
deleted file mode 100644
index 5aaead9b56f7..000000000000
--- a/drivers/dma/intel_mid_dma.c
+++ /dev/null
@@ -1,1447 +0,0 @@
-/*
- *  intel_mid_dma.c - Intel Langwell DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul@intel.com>
- *  The driver design is based on dw_dmac driver
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/pm_runtime.h>
-#include <linux/intel_mid_dma.h>
-#include <linux/module.h>
-
-#include "dmaengine.h"
-
-#define MAX_CHAN	4 /*max ch across controllers*/
-#include "intel_mid_dma_regs.h"
-
-#define INTEL_MID_DMAC1_ID		0x0814
-#define INTEL_MID_DMAC2_ID		0x0813
-#define INTEL_MID_GP_DMAC2_ID		0x0827
-#define INTEL_MFLD_DMAC1_ID		0x0830
-#define LNW_PERIPHRAL_MASK_BASE		0xFFAE8008
-#define LNW_PERIPHRAL_MASK_SIZE		0x10
-#define LNW_PERIPHRAL_STATUS		0x0
-#define LNW_PERIPHRAL_MASK		0x8
-
-struct intel_mid_dma_probe_info {
-	u8 max_chan;
-	u8 ch_base;
-	u16 block_size;
-	u32 pimr_mask;
-};
-
-#define INFO(_max_chan, _ch_base, _block_size, _pimr_mask) \
-	((kernel_ulong_t)&(struct intel_mid_dma_probe_info) {	\
-		.max_chan = (_max_chan),			\
-		.ch_base = (_ch_base),				\
-		.block_size = (_block_size),			\
-		.pimr_mask = (_pimr_mask),			\
-	})
-
-/*****************************************************************************
-Utility Functions*/
-/**
- * get_ch_index	-	convert status to channel
- * @status: status mask
- * @base: dma ch base value
- *
- * Modify the status mask and return the channel index needing
- * attention (or -1 if neither)
- */
-static int get_ch_index(int *status, unsigned int base)
-{
-	int i;
-	for (i = 0; i < MAX_CHAN; i++) {
-		if (*status & (1 << (i + base))) {
-			*status = *status & ~(1 << (i + base));
-			pr_debug("MDMA: index %d New status %x\n", i, *status);
-			return i;
-		}
-	}
-	return -1;
-}
-
-/**
- * get_block_ts	-	calculates dma transaction length
- * @len: dma transfer length
- * @tx_width: dma transfer src width
- * @block_size: dma controller max block size
- *
- * Based on src width calculate the DMA trsaction length in data items
- * return data items or FFFF if exceeds max length for block
- */
-static int get_block_ts(int len, int tx_width, int block_size)
-{
-	int byte_width = 0, block_ts = 0;
-
-	switch (tx_width) {
-	case DMA_SLAVE_BUSWIDTH_1_BYTE:
-		byte_width = 1;
-		break;
-	case DMA_SLAVE_BUSWIDTH_2_BYTES:
-		byte_width = 2;
-		break;
-	case DMA_SLAVE_BUSWIDTH_4_BYTES:
-	default:
-		byte_width = 4;
-		break;
-	}
-
-	block_ts = len/byte_width;
-	if (block_ts > block_size)
-		block_ts = 0xFFFF;
-	return block_ts;
-}
-
-/*****************************************************************************
-DMAC1 interrupt Functions*/
-
-/**
- * dmac1_mask_periphral_intr -	mask the periphral interrupt
- * @mid: dma device for which masking is required
- *
- * Masks the DMA periphral interrupt
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void dmac1_mask_periphral_intr(struct middma_device *mid)
-{
-	u32 pimr;
-
-	if (mid->pimr_mask) {
-		pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK);
-		pimr |= mid->pimr_mask;
-		writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK);
-	}
-	return;
-}
-
-/**
- * dmac1_unmask_periphral_intr -	unmask the periphral interrupt
- * @midc: dma channel for which masking is required
- *
- * UnMasks the DMA periphral interrupt,
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void dmac1_unmask_periphral_intr(struct intel_mid_dma_chan *midc)
-{
-	u32 pimr;
-	struct middma_device *mid = to_middma_device(midc->chan.device);
-
-	if (mid->pimr_mask) {
-		pimr = readl(mid->mask_reg + LNW_PERIPHRAL_MASK);
-		pimr &= ~mid->pimr_mask;
-		writel(pimr, mid->mask_reg + LNW_PERIPHRAL_MASK);
-	}
-	return;
-}
-
-/**
- * enable_dma_interrupt -	enable the periphral interrupt
- * @midc: dma channel for which enable interrupt is required
- *
- * Enable the DMA periphral interrupt,
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void enable_dma_interrupt(struct intel_mid_dma_chan *midc)
-{
-	dmac1_unmask_periphral_intr(midc);
-
-	/*en ch interrupts*/
-	iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR);
-	iowrite32(UNMASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR);
-	return;
-}
-
-/**
- * disable_dma_interrupt -	disable the periphral interrupt
- * @midc: dma channel for which disable interrupt is required
- *
- * Disable the DMA periphral interrupt,
- * this is valid for DMAC1 family controllers only
- * This controller should have periphral mask registers already mapped
- */
-static void disable_dma_interrupt(struct intel_mid_dma_chan *midc)
-{
-	/*Check LPE PISR, make sure fwd is disabled*/
-	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_BLOCK);
-	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_TFR);
-	iowrite32(MASK_INTR_REG(midc->ch_id), midc->dma_base + MASK_ERR);
-	return;
-}
-
-/*****************************************************************************
-DMA channel helper Functions*/
-/**
- * mid_desc_get		-	get a descriptor
- * @midc: dma channel for which descriptor is required
- *
- * Obtain a descriptor for the channel. Returns NULL if none are free.
- * Once the descriptor is returned it is private until put on another
- * list or freed
- */
-static struct intel_mid_dma_desc *midc_desc_get(struct intel_mid_dma_chan *midc)
-{
-	struct intel_mid_dma_desc *desc, *_desc;
-	struct intel_mid_dma_desc *ret = NULL;
-
-	spin_lock_bh(&midc->lock);
-	list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) {
-		if (async_tx_test_ack(&desc->txd)) {
-			list_del(&desc->desc_node);
-			ret = desc;
-			break;
-		}
-	}
-	spin_unlock_bh(&midc->lock);
-	return ret;
-}
-
-/**
- * mid_desc_put		-	put a descriptor
- * @midc: dma channel for which descriptor is required
- * @desc: descriptor to put
- *
- * Return a descriptor from lwn_desc_get back to the free pool
- */
-static void midc_desc_put(struct intel_mid_dma_chan *midc,
-			struct intel_mid_dma_desc *desc)
-{
-	if (desc) {
-		spin_lock_bh(&midc->lock);
-		list_add_tail(&desc->desc_node, &midc->free_list);
-		spin_unlock_bh(&midc->lock);
-	}
-}
-/**
- * midc_dostart		-		begin a DMA transaction
- * @midc: channel for which txn is to be started
- * @first: first descriptor of series
- *
- * Load a transaction into the engine. This must be called with midc->lock
- * held and bh disabled.
- */
-static void midc_dostart(struct intel_mid_dma_chan *midc,
-			struct intel_mid_dma_desc *first)
-{
-	struct middma_device *mid = to_middma_device(midc->chan.device);
-
-	/*  channel is idle */
-	if (midc->busy && test_ch_en(midc->dma_base, midc->ch_id)) {
-		/*error*/
-		pr_err("ERR_MDMA: channel is busy in start\n");
-		/* The tasklet will hopefully advance the queue... */
-		return;
-	}
-	midc->busy = true;
-	/*write registers and en*/
-	iowrite32(first->sar, midc->ch_regs + SAR);
-	iowrite32(first->dar, midc->ch_regs + DAR);
-	iowrite32(first->lli_phys, midc->ch_regs + LLP);
-	iowrite32(first->cfg_hi, midc->ch_regs + CFG_HIGH);
-	iowrite32(first->cfg_lo, midc->ch_regs + CFG_LOW);
-	iowrite32(first->ctl_lo, midc->ch_regs + CTL_LOW);
-	iowrite32(first->ctl_hi, midc->ch_regs + CTL_HIGH);
-	pr_debug("MDMA:TX SAR %x,DAR %x,CFGL %x,CFGH %x,CTLH %x, CTLL %x\n",
-		(int)first->sar, (int)first->dar, first->cfg_hi,
-		first->cfg_lo, first->ctl_hi, first->ctl_lo);
-	first->status = DMA_IN_PROGRESS;
-
-	iowrite32(ENABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN);
-}
-
-/**
- * midc_descriptor_complete	-	process completed descriptor
- * @midc: channel owning the descriptor
- * @desc: the descriptor itself
- *
- * Process a completed descriptor and perform any callbacks upon
- * the completion. The completion handling drops the lock during the
- * callbacks but must be called with the lock held.
- */
-static void midc_descriptor_complete(struct intel_mid_dma_chan *midc,
-		struct intel_mid_dma_desc *desc)
-		__releases(&midc->lock) __acquires(&midc->lock)
-{
-	struct dma_async_tx_descriptor	*txd = &desc->txd;
-	dma_async_tx_callback callback_txd = NULL;
-	struct intel_mid_dma_lli	*llitem;
-	void *param_txd = NULL;
-
-	dma_cookie_complete(txd);
-	callback_txd = txd->callback;
-	param_txd = txd->callback_param;
-
-	if (desc->lli != NULL) {
-		/*clear the DONE bit of completed LLI in memory*/
-		llitem = desc->lli + desc->current_lli;
-		llitem->ctl_hi &= CLEAR_DONE;
-		if (desc->current_lli < desc->lli_length-1)
-			(desc->current_lli)++;
-		else
-			desc->current_lli = 0;
-	}
-	spin_unlock_bh(&midc->lock);
-	if (callback_txd) {
-		pr_debug("MDMA: TXD callback set ... calling\n");
-		callback_txd(param_txd);
-	}
-	if (midc->raw_tfr) {
-		desc->status = DMA_COMPLETE;
-		if (desc->lli != NULL) {
-			pci_pool_free(desc->lli_pool, desc->lli,
-						desc->lli_phys);
-			pci_pool_destroy(desc->lli_pool);
-			desc->lli = NULL;
-		}
-		list_move(&desc->desc_node, &midc->free_list);
-		midc->busy = false;
-	}
-	spin_lock_bh(&midc->lock);
-
-}
-/**
- * midc_scan_descriptors -		check the descriptors in channel
- *					mark completed when tx is completete
- * @mid: device
- * @midc: channel to scan
- *
- * Walk the descriptor chain for the device and process any entries
- * that are complete.
- */
-static void midc_scan_descriptors(struct middma_device *mid,
-				struct intel_mid_dma_chan *midc)
-{
-	struct intel_mid_dma_desc *desc = NULL, *_desc = NULL;
-
-	/*tx is complete*/
-	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
-		if (desc->status == DMA_IN_PROGRESS)
-			midc_descriptor_complete(midc, desc);
-	}
-	return;
-	}
-/**
- * midc_lli_fill_sg -		Helper function to convert
- *				SG list to Linked List Items.
- *@midc: Channel
- *@desc: DMA descriptor
- *@sglist: Pointer to SG list
- *@sglen: SG list length
- *@flags: DMA transaction flags
- *
- * Walk through the SG list and convert the SG list into Linked
- * List Items (LLI).
- */
-static int midc_lli_fill_sg(struct intel_mid_dma_chan *midc,
-				struct intel_mid_dma_desc *desc,
-				struct scatterlist *sglist,
-				unsigned int sglen,
-				unsigned int flags)
-{
-	struct intel_mid_dma_slave *mids;
-	struct scatterlist  *sg;
-	dma_addr_t lli_next, sg_phy_addr;
-	struct intel_mid_dma_lli *lli_bloc_desc;
-	union intel_mid_dma_ctl_lo ctl_lo;
-	union intel_mid_dma_ctl_hi ctl_hi;
-	int i;
-
-	pr_debug("MDMA: Entered midc_lli_fill_sg\n");
-	mids = midc->mid_slave;
-
-	lli_bloc_desc = desc->lli;
-	lli_next = desc->lli_phys;
-
-	ctl_lo.ctl_lo = desc->ctl_lo;
-	ctl_hi.ctl_hi = desc->ctl_hi;
-	for_each_sg(sglist, sg, sglen, i) {
-		/*Populate CTL_LOW and LLI values*/
-		if (i != sglen - 1) {
-			lli_next = lli_next +
-				sizeof(struct intel_mid_dma_lli);
-		} else {
-		/*Check for circular list, otherwise terminate LLI to ZERO*/
-			if (flags & DMA_PREP_CIRCULAR_LIST) {
-				pr_debug("MDMA: LLI is configured in circular mode\n");
-				lli_next = desc->lli_phys;
-			} else {
-				lli_next = 0;
-				ctl_lo.ctlx.llp_dst_en = 0;
-				ctl_lo.ctlx.llp_src_en = 0;
-			}
-		}
-		/*Populate CTL_HI values*/
-		ctl_hi.ctlx.block_ts = get_block_ts(sg_dma_len(sg),
-							desc->width,
-							midc->dma->block_size);
-		/*Populate SAR and DAR values*/
-		sg_phy_addr = sg_dma_address(sg);
-		if (desc->dirn ==  DMA_MEM_TO_DEV) {
-			lli_bloc_desc->sar  = sg_phy_addr;
-			lli_bloc_desc->dar  = mids->dma_slave.dst_addr;
-		} else if (desc->dirn ==  DMA_DEV_TO_MEM) {
-			lli_bloc_desc->sar  = mids->dma_slave.src_addr;
-			lli_bloc_desc->dar  = sg_phy_addr;
-		}
-		/*Copy values into block descriptor in system memroy*/
-		lli_bloc_desc->llp = lli_next;
-		lli_bloc_desc->ctl_lo = ctl_lo.ctl_lo;
-		lli_bloc_desc->ctl_hi = ctl_hi.ctl_hi;
-
-		lli_bloc_desc++;
-	}
-	/*Copy very first LLI values to descriptor*/
-	desc->ctl_lo = desc->lli->ctl_lo;
-	desc->ctl_hi = desc->lli->ctl_hi;
-	desc->sar = desc->lli->sar;
-	desc->dar = desc->lli->dar;
-
-	return 0;
-}
-/*****************************************************************************
-DMA engine callback Functions*/
-/**
- * intel_mid_dma_tx_submit -	callback to submit DMA transaction
- * @tx: dma engine descriptor
- *
- * Submit the DMA transaction for this descriptor, start if ch idle
- */
-static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx)
-{
-	struct intel_mid_dma_desc	*desc = to_intel_mid_dma_desc(tx);
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(tx->chan);
-	dma_cookie_t		cookie;
-
-	spin_lock_bh(&midc->lock);
-	cookie = dma_cookie_assign(tx);
-
-	if (list_empty(&midc->active_list))
-		list_add_tail(&desc->desc_node, &midc->active_list);
-	else
-		list_add_tail(&desc->desc_node, &midc->queue);
-
-	midc_dostart(midc, desc);
-	spin_unlock_bh(&midc->lock);
-
-	return cookie;
-}
-
-/**
- * intel_mid_dma_issue_pending -	callback to issue pending txn
- * @chan: chan where pending trascation needs to be checked and submitted
- *
- * Call for scan to issue pending descriptors
- */
-static void intel_mid_dma_issue_pending(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-
-	spin_lock_bh(&midc->lock);
-	if (!list_empty(&midc->queue))
-		midc_scan_descriptors(to_middma_device(chan->device), midc);
-	spin_unlock_bh(&midc->lock);
-}
-
-/**
- * intel_mid_dma_tx_status -	Return status of txn
- * @chan: chan for where status needs to be checked
- * @cookie: cookie for txn
- * @txstate: DMA txn state
- *
- * Return status of DMA txn
- */
-static enum dma_status intel_mid_dma_tx_status(struct dma_chan *chan,
-						dma_cookie_t cookie,
-						struct dma_tx_state *txstate)
-{
-	struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan);
-	enum dma_status ret;
-
-	ret = dma_cookie_status(chan, cookie, txstate);
-	if (ret != DMA_COMPLETE) {
-		spin_lock_bh(&midc->lock);
-		midc_scan_descriptors(to_middma_device(chan->device), midc);
-		spin_unlock_bh(&midc->lock);
-
-		ret = dma_cookie_status(chan, cookie, txstate);
-	}
-
-	return ret;
-}
-
-static int intel_mid_dma_config(struct dma_chan *chan,
-				struct dma_slave_config *slave)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct intel_mid_dma_slave *mid_slave;
-
-	BUG_ON(!midc);
-	BUG_ON(!slave);
-	pr_debug("MDMA: slave control called\n");
-
-	mid_slave = to_intel_mid_dma_slave(slave);
-
-	BUG_ON(!mid_slave);
-
-	midc->mid_slave = mid_slave;
-	return 0;
-}
-
-static int intel_mid_dma_terminate_all(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct middma_device	*mid = to_middma_device(chan->device);
-	struct intel_mid_dma_desc	*desc, *_desc;
-	union intel_mid_dma_cfg_lo cfg_lo;
-
-	spin_lock_bh(&midc->lock);
-	if (midc->busy == false) {
-		spin_unlock_bh(&midc->lock);
-		return 0;
-	}
-	/*Suspend and disable the channel*/
-	cfg_lo.cfg_lo = ioread32(midc->ch_regs + CFG_LOW);
-	cfg_lo.cfgx.ch_susp = 1;
-	iowrite32(cfg_lo.cfg_lo, midc->ch_regs + CFG_LOW);
-	iowrite32(DISABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN);
-	midc->busy = false;
-	/* Disable interrupts */
-	disable_dma_interrupt(midc);
-	midc->descs_allocated = 0;
-
-	spin_unlock_bh(&midc->lock);
-	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
-		if (desc->lli != NULL) {
-			pci_pool_free(desc->lli_pool, desc->lli,
-						desc->lli_phys);
-			pci_pool_destroy(desc->lli_pool);
-			desc->lli = NULL;
-		}
-		list_move(&desc->desc_node, &midc->free_list);
-	}
-	return 0;
-}
-
-
-/**
- * intel_mid_dma_prep_memcpy -	Prep memcpy txn
- * @chan: chan for DMA transfer
- * @dest: destn address
- * @src: src address
- * @len: DMA transfer len
- * @flags: DMA flags
- *
- * Perform a DMA memcpy. Note we support slave periphral DMA transfers only
- * The periphral txn details should be filled in slave structure properly
- * Returns the descriptor for this txn
- */
-static struct dma_async_tx_descriptor *intel_mid_dma_prep_memcpy(
-			struct dma_chan *chan, dma_addr_t dest,
-			dma_addr_t src, size_t len, unsigned long flags)
-{
-	struct intel_mid_dma_chan *midc;
-	struct intel_mid_dma_desc *desc = NULL;
-	struct intel_mid_dma_slave *mids;
-	union intel_mid_dma_ctl_lo ctl_lo;
-	union intel_mid_dma_ctl_hi ctl_hi;
-	union intel_mid_dma_cfg_lo cfg_lo;
-	union intel_mid_dma_cfg_hi cfg_hi;
-	enum dma_slave_buswidth width;
-
-	pr_debug("MDMA: Prep for memcpy\n");
-	BUG_ON(!chan);
-	if (!len)
-		return NULL;
-
-	midc = to_intel_mid_dma_chan(chan);
-	BUG_ON(!midc);
-
-	mids = midc->mid_slave;
-	BUG_ON(!mids);
-
-	pr_debug("MDMA:called for DMA %x CH %d Length %zu\n",
-				midc->dma->pci_id, midc->ch_id, len);
-	pr_debug("MDMA:Cfg passed Mode %x, Dirn %x, HS %x, Width %x\n",
-			mids->cfg_mode, mids->dma_slave.direction,
-			mids->hs_mode, mids->dma_slave.src_addr_width);
-
-	/*calculate CFG_LO*/
-	if (mids->hs_mode == LNW_DMA_SW_HS) {
-		cfg_lo.cfg_lo = 0;
-		cfg_lo.cfgx.hs_sel_dst = 1;
-		cfg_lo.cfgx.hs_sel_src = 1;
-	} else if (mids->hs_mode == LNW_DMA_HW_HS)
-		cfg_lo.cfg_lo = 0x00000;
-
-	/*calculate CFG_HI*/
-	if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
-		/*SW HS only*/
-		cfg_hi.cfg_hi = 0;
-	} else {
-		cfg_hi.cfg_hi = 0;
-		if (midc->dma->pimr_mask) {
-			cfg_hi.cfgx.protctl = 0x0; /*default value*/
-			cfg_hi.cfgx.fifo_mode = 1;
-			if (mids->dma_slave.direction == DMA_MEM_TO_DEV) {
-				cfg_hi.cfgx.src_per = 0;
-				if (mids->device_instance == 0)
-					cfg_hi.cfgx.dst_per = 3;
-				if (mids->device_instance == 1)
-					cfg_hi.cfgx.dst_per = 1;
-			} else if (mids->dma_slave.direction == DMA_DEV_TO_MEM) {
-				if (mids->device_instance == 0)
-					cfg_hi.cfgx.src_per = 2;
-				if (mids->device_instance == 1)
-					cfg_hi.cfgx.src_per = 0;
-				cfg_hi.cfgx.dst_per = 0;
-			}
-		} else {
-			cfg_hi.cfgx.protctl = 0x1; /*default value*/
-			cfg_hi.cfgx.src_per = cfg_hi.cfgx.dst_per =
-					midc->ch_id - midc->dma->chan_base;
-		}
-	}
-
-	/*calculate CTL_HI*/
-	ctl_hi.ctlx.reser = 0;
-	ctl_hi.ctlx.done  = 0;
-	width = mids->dma_slave.src_addr_width;
-
-	ctl_hi.ctlx.block_ts = get_block_ts(len, width, midc->dma->block_size);
-	pr_debug("MDMA:calc len %d for block size %d\n",
-				ctl_hi.ctlx.block_ts, midc->dma->block_size);
-	/*calculate CTL_LO*/
-	ctl_lo.ctl_lo = 0;
-	ctl_lo.ctlx.int_en = 1;
-	ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst;
-	ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst;
-
-	/*
-	 * Here we need some translation from "enum dma_slave_buswidth"
-	 * to the format for our dma controller
-	 *		standard	intel_mid_dmac's format
-	 *		 1 Byte			0b000
-	 *		 2 Bytes		0b001
-	 *		 4 Bytes		0b010
-	 */
-	ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width / 2;
-	ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width / 2;
-
-	if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
-		ctl_lo.ctlx.tt_fc = 0;
-		ctl_lo.ctlx.sinc = 0;
-		ctl_lo.ctlx.dinc = 0;
-	} else {
-		if (mids->dma_slave.direction == DMA_MEM_TO_DEV) {
-			ctl_lo.ctlx.sinc = 0;
-			ctl_lo.ctlx.dinc = 2;
-			ctl_lo.ctlx.tt_fc = 1;
-		} else if (mids->dma_slave.direction == DMA_DEV_TO_MEM) {
-			ctl_lo.ctlx.sinc = 2;
-			ctl_lo.ctlx.dinc = 0;
-			ctl_lo.ctlx.tt_fc = 2;
-		}
-	}
-
-	pr_debug("MDMA:Calc CTL LO %x, CTL HI %x, CFG LO %x, CFG HI %x\n",
-		ctl_lo.ctl_lo, ctl_hi.ctl_hi, cfg_lo.cfg_lo, cfg_hi.cfg_hi);
-
-	enable_dma_interrupt(midc);
-
-	desc = midc_desc_get(midc);
-	if (desc == NULL)
-		goto err_desc_get;
-	desc->sar = src;
-	desc->dar = dest ;
-	desc->len = len;
-	desc->cfg_hi = cfg_hi.cfg_hi;
-	desc->cfg_lo = cfg_lo.cfg_lo;
-	desc->ctl_lo = ctl_lo.ctl_lo;
-	desc->ctl_hi = ctl_hi.ctl_hi;
-	desc->width = width;
-	desc->dirn = mids->dma_slave.direction;
-	desc->lli_phys = 0;
-	desc->lli = NULL;
-	desc->lli_pool = NULL;
-	return &desc->txd;
-
-err_desc_get:
-	pr_err("ERR_MDMA: Failed to get desc\n");
-	midc_desc_put(midc, desc);
-	return NULL;
-}
-/**
- * intel_mid_dma_prep_slave_sg -	Prep slave sg txn
- * @chan: chan for DMA transfer
- * @sgl: scatter gather list
- * @sg_len: length of sg txn
- * @direction: DMA transfer dirtn
- * @flags: DMA flags
- * @context: transfer context (ignored)
- *
- * Prepares LLI based periphral transfer
- */
-static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg(
-			struct dma_chan *chan, struct scatterlist *sgl,
-			unsigned int sg_len, enum dma_transfer_direction direction,
-			unsigned long flags, void *context)
-{
-	struct intel_mid_dma_chan *midc = NULL;
-	struct intel_mid_dma_slave *mids = NULL;
-	struct intel_mid_dma_desc *desc = NULL;
-	struct dma_async_tx_descriptor *txd = NULL;
-	union intel_mid_dma_ctl_lo ctl_lo;
-
-	pr_debug("MDMA: Prep for slave SG\n");
-
-	if (!sg_len) {
-		pr_err("MDMA: Invalid SG length\n");
-		return NULL;
-	}
-	midc = to_intel_mid_dma_chan(chan);
-	BUG_ON(!midc);
-
-	mids = midc->mid_slave;
-	BUG_ON(!mids);
-
-	if (!midc->dma->pimr_mask) {
-		/* We can still handle sg list with only one item */
-		if (sg_len == 1) {
-			txd = intel_mid_dma_prep_memcpy(chan,
-						mids->dma_slave.dst_addr,
-						mids->dma_slave.src_addr,
-						sg_dma_len(sgl),
-						flags);
-			return txd;
-		} else {
-			pr_warn("MDMA: SG list is not supported by this controller\n");
-			return  NULL;
-		}
-	}
-
-	pr_debug("MDMA: SG Length = %d, direction = %d, Flags = %#lx\n",
-			sg_len, direction, flags);
-
-	txd = intel_mid_dma_prep_memcpy(chan, 0, 0, sg_dma_len(sgl), flags);
-	if (NULL == txd) {
-		pr_err("MDMA: Prep memcpy failed\n");
-		return NULL;
-	}
-
-	desc = to_intel_mid_dma_desc(txd);
-	desc->dirn = direction;
-	ctl_lo.ctl_lo = desc->ctl_lo;
-	ctl_lo.ctlx.llp_dst_en = 1;
-	ctl_lo.ctlx.llp_src_en = 1;
-	desc->ctl_lo = ctl_lo.ctl_lo;
-	desc->lli_length = sg_len;
-	desc->current_lli = 0;
-	/* DMA coherent memory pool for LLI descriptors*/
-	desc->lli_pool = pci_pool_create("intel_mid_dma_lli_pool",
-				midc->dma->pdev,
-				(sizeof(struct intel_mid_dma_lli)*sg_len),
-				32, 0);
-	if (NULL == desc->lli_pool) {
-		pr_err("MID_DMA:LLI pool create failed\n");
-		return NULL;
-	}
-
-	desc->lli = pci_pool_alloc(desc->lli_pool, GFP_KERNEL, &desc->lli_phys);
-	if (!desc->lli) {
-		pr_err("MID_DMA: LLI alloc failed\n");
-		pci_pool_destroy(desc->lli_pool);
-		return NULL;
-	}
-
-	midc_lli_fill_sg(midc, desc, sgl, sg_len, flags);
-	if (flags & DMA_PREP_INTERRUPT) {
-		iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				midc->dma_base + MASK_BLOCK);
-		pr_debug("MDMA:Enabled Block interrupt\n");
-	}
-	return &desc->txd;
-}
-
-/**
- * intel_mid_dma_free_chan_resources -	Frees dma resources
- * @chan: chan requiring attention
- *
- * Frees the allocated resources on this DMA chan
- */
-static void intel_mid_dma_free_chan_resources(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct middma_device	*mid = to_middma_device(chan->device);
-	struct intel_mid_dma_desc	*desc, *_desc;
-
-	if (true == midc->busy) {
-		/*trying to free ch in use!!!!!*/
-		pr_err("ERR_MDMA: trying to free ch in use\n");
-	}
-	spin_lock_bh(&midc->lock);
-	midc->descs_allocated = 0;
-	list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
-		list_del(&desc->desc_node);
-		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
-	}
-	list_for_each_entry_safe(desc, _desc, &midc->free_list, desc_node) {
-		list_del(&desc->desc_node);
-		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
-	}
-	list_for_each_entry_safe(desc, _desc, &midc->queue, desc_node) {
-		list_del(&desc->desc_node);
-		pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
-	}
-	spin_unlock_bh(&midc->lock);
-	midc->in_use = false;
-	midc->busy = false;
-	/* Disable CH interrupts */
-	iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_BLOCK);
-	iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_ERR);
-	pm_runtime_put(&mid->pdev->dev);
-}
-
-/**
- * intel_mid_dma_alloc_chan_resources -	Allocate dma resources
- * @chan: chan requiring attention
- *
- * Allocates DMA resources on this chan
- * Return the descriptors allocated
- */
-static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan)
-{
-	struct intel_mid_dma_chan	*midc = to_intel_mid_dma_chan(chan);
-	struct middma_device	*mid = to_middma_device(chan->device);
-	struct intel_mid_dma_desc	*desc;
-	dma_addr_t		phys;
-	int	i = 0;
-
-	pm_runtime_get_sync(&mid->pdev->dev);
-
-	if (mid->state == SUSPENDED) {
-		if (dma_resume(&mid->pdev->dev)) {
-			pr_err("ERR_MDMA: resume failed");
-			return -EFAULT;
-		}
-	}
-
-	/* ASSERT:  channel is idle */
-	if (test_ch_en(mid->dma_base, midc->ch_id)) {
-		/*ch is not idle*/
-		pr_err("ERR_MDMA: ch not idle\n");
-		pm_runtime_put(&mid->pdev->dev);
-		return -EIO;
-	}
-	dma_cookie_init(chan);
-
-	spin_lock_bh(&midc->lock);
-	while (midc->descs_allocated < DESCS_PER_CHANNEL) {
-		spin_unlock_bh(&midc->lock);
-		desc = pci_pool_alloc(mid->dma_pool, GFP_KERNEL, &phys);
-		if (!desc) {
-			pr_err("ERR_MDMA: desc failed\n");
-			pm_runtime_put(&mid->pdev->dev);
-			return -ENOMEM;
-			/*check*/
-		}
-		dma_async_tx_descriptor_init(&desc->txd, chan);
-		desc->txd.tx_submit = intel_mid_dma_tx_submit;
-		desc->txd.flags = DMA_CTRL_ACK;
-		desc->txd.phys = phys;
-		spin_lock_bh(&midc->lock);
-		i = ++midc->descs_allocated;
-		list_add_tail(&desc->desc_node, &midc->free_list);
-	}
-	spin_unlock_bh(&midc->lock);
-	midc->in_use = true;
-	midc->busy = false;
-	pr_debug("MID_DMA: Desc alloc done ret: %d desc\n", i);
-	return i;
-}
-
-/**
- * midc_handle_error -	Handle DMA txn error
- * @mid: controller where error occurred
- * @midc: chan where error occurred
- *
- * Scan the descriptor for error
- */
-static void midc_handle_error(struct middma_device *mid,
-		struct intel_mid_dma_chan *midc)
-{
-	midc_scan_descriptors(mid, midc);
-}
-
-/**
- * dma_tasklet -	DMA interrupt tasklet
- * @data: tasklet arg (the controller structure)
- *
- * Scan the controller for interrupts for completion/error
- * Clear the interrupt and call for handling completion/error
- */
-static void dma_tasklet(unsigned long data)
-{
-	struct middma_device *mid = NULL;
-	struct intel_mid_dma_chan *midc = NULL;
-	u32 status, raw_tfr, raw_block;
-	int i;
-
-	mid = (struct middma_device *)data;
-	if (mid == NULL) {
-		pr_err("ERR_MDMA: tasklet Null param\n");
-		return;
-	}
-	pr_debug("MDMA: in tasklet for device %x\n", mid->pci_id);
-	raw_tfr = ioread32(mid->dma_base + RAW_TFR);
-	raw_block = ioread32(mid->dma_base + RAW_BLOCK);
-	status = raw_tfr | raw_block;
-	status &= mid->intr_mask;
-	while (status) {
-		/*txn interrupt*/
-		i = get_ch_index(&status, mid->chan_base);
-		if (i < 0) {
-			pr_err("ERR_MDMA:Invalid ch index %x\n", i);
-			return;
-		}
-		midc = &mid->ch[i];
-		if (midc == NULL) {
-			pr_err("ERR_MDMA:Null param midc\n");
-			return;
-		}
-		pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n",
-				status, midc->ch_id, i);
-		midc->raw_tfr = raw_tfr;
-		midc->raw_block = raw_block;
-		spin_lock_bh(&midc->lock);
-		/*clearing this interrupts first*/
-		iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_TFR);
-		if (raw_block) {
-			iowrite32((1 << midc->ch_id),
-				mid->dma_base + CLEAR_BLOCK);
-		}
-		midc_scan_descriptors(mid, midc);
-		pr_debug("MDMA:Scan of desc... complete, unmasking\n");
-		iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				mid->dma_base + MASK_TFR);
-		if (raw_block) {
-			iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				mid->dma_base + MASK_BLOCK);
-		}
-		spin_unlock_bh(&midc->lock);
-	}
-
-	status = ioread32(mid->dma_base + RAW_ERR);
-	status &= mid->intr_mask;
-	while (status) {
-		/*err interrupt*/
-		i = get_ch_index(&status, mid->chan_base);
-		if (i < 0) {
-			pr_err("ERR_MDMA:Invalid ch index %x\n", i);
-			return;
-		}
-		midc = &mid->ch[i];
-		if (midc == NULL) {
-			pr_err("ERR_MDMA:Null param midc\n");
-			return;
-		}
-		pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n",
-				status, midc->ch_id, i);
-
-		iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_ERR);
-		spin_lock_bh(&midc->lock);
-		midc_handle_error(mid, midc);
-		iowrite32(UNMASK_INTR_REG(midc->ch_id),
-				mid->dma_base + MASK_ERR);
-		spin_unlock_bh(&midc->lock);
-	}
-	pr_debug("MDMA:Exiting takslet...\n");
-	return;
-}
-
-static void dma_tasklet1(unsigned long data)
-{
-	pr_debug("MDMA:in takslet1...\n");
-	return dma_tasklet(data);
-}
-
-static void dma_tasklet2(unsigned long data)
-{
-	pr_debug("MDMA:in takslet2...\n");
-	return dma_tasklet(data);
-}
-
-/**
- * intel_mid_dma_interrupt -	DMA ISR
- * @irq: IRQ where interrupt occurred
- * @data: ISR cllback data (the controller structure)
- *
- * See if this is our interrupt if so then schedule the tasklet
- * otherwise ignore
- */
-static irqreturn_t intel_mid_dma_interrupt(int irq, void *data)
-{
-	struct middma_device *mid = data;
-	u32 tfr_status, err_status;
-	int call_tasklet = 0;
-
-	tfr_status = ioread32(mid->dma_base + RAW_TFR);
-	err_status = ioread32(mid->dma_base + RAW_ERR);
-	if (!tfr_status && !err_status)
-		return IRQ_NONE;
-
-	/*DMA Interrupt*/
-	pr_debug("MDMA:Got an interrupt on irq %d\n", irq);
-	pr_debug("MDMA: Status %x, Mask %x\n", tfr_status, mid->intr_mask);
-	tfr_status &= mid->intr_mask;
-	if (tfr_status) {
-		/*need to disable intr*/
-		iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_TFR);
-		iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_BLOCK);
-		pr_debug("MDMA: Calling tasklet %x\n", tfr_status);
-		call_tasklet = 1;
-	}
-	err_status &= mid->intr_mask;
-	if (err_status) {
-		iowrite32((err_status << INT_MASK_WE),
-			  mid->dma_base + MASK_ERR);
-		call_tasklet = 1;
-	}
-	if (call_tasklet)
-		tasklet_schedule(&mid->tasklet);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t intel_mid_dma_interrupt1(int irq, void *data)
-{
-	return intel_mid_dma_interrupt(irq, data);
-}
-
-static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data)
-{
-	return intel_mid_dma_interrupt(irq, data);
-}
-
-/**
- * mid_setup_dma -	Setup the DMA controller
- * @pdev: Controller PCI device structure
- *
- * Initialize the DMA controller, channels, registers with DMA engine,
- * ISR. Initialize DMA controller channels.
- */
-static int mid_setup_dma(struct pci_dev *pdev)
-{
-	struct middma_device *dma = pci_get_drvdata(pdev);
-	int err, i;
-
-	/* DMA coherent memory pool for DMA descriptor allocations */
-	dma->dma_pool = pci_pool_create("intel_mid_dma_desc_pool", pdev,
-					sizeof(struct intel_mid_dma_desc),
-					32, 0);
-	if (NULL == dma->dma_pool) {
-		pr_err("ERR_MDMA:pci_pool_create failed\n");
-		err = -ENOMEM;
-		goto err_dma_pool;
-	}
-
-	INIT_LIST_HEAD(&dma->common.channels);
-	dma->pci_id = pdev->device;
-	if (dma->pimr_mask) {
-		dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE,
-					LNW_PERIPHRAL_MASK_SIZE);
-		if (dma->mask_reg == NULL) {
-			pr_err("ERR_MDMA:Can't map periphral intr space !!\n");
-			err = -ENOMEM;
-			goto err_ioremap;
-		}
-	} else
-		dma->mask_reg = NULL;
-
-	pr_debug("MDMA:Adding %d channel for this controller\n", dma->max_chan);
-	/*init CH structures*/
-	dma->intr_mask = 0;
-	dma->state = RUNNING;
-	for (i = 0; i < dma->max_chan; i++) {
-		struct intel_mid_dma_chan *midch = &dma->ch[i];
-
-		midch->chan.device = &dma->common;
-		dma_cookie_init(&midch->chan);
-		midch->ch_id = dma->chan_base + i;
-		pr_debug("MDMA:Init CH %d, ID %d\n", i, midch->ch_id);
-
-		midch->dma_base = dma->dma_base;
-		midch->ch_regs = dma->dma_base + DMA_CH_SIZE * midch->ch_id;
-		midch->dma = dma;
-		dma->intr_mask |= 1 << (dma->chan_base + i);
-		spin_lock_init(&midch->lock);
-
-		INIT_LIST_HEAD(&midch->active_list);
-		INIT_LIST_HEAD(&midch->queue);
-		INIT_LIST_HEAD(&midch->free_list);
-		/*mask interrupts*/
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_BLOCK);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_SRC_TRAN);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_DST_TRAN);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_ERR);
-		iowrite32(MASK_INTR_REG(midch->ch_id),
-			dma->dma_base + MASK_TFR);
-
-		disable_dma_interrupt(midch);
-		list_add_tail(&midch->chan.device_node, &dma->common.channels);
-	}
-	pr_debug("MDMA: Calc Mask as %x for this controller\n", dma->intr_mask);
-
-	/*init dma structure*/
-	dma_cap_zero(dma->common.cap_mask);
-	dma_cap_set(DMA_MEMCPY, dma->common.cap_mask);
-	dma_cap_set(DMA_SLAVE, dma->common.cap_mask);
-	dma_cap_set(DMA_PRIVATE, dma->common.cap_mask);
-	dma->common.dev = &pdev->dev;
-
-	dma->common.device_alloc_chan_resources =
-					intel_mid_dma_alloc_chan_resources;
-	dma->common.device_free_chan_resources =
-					intel_mid_dma_free_chan_resources;
-
-	dma->common.device_tx_status = intel_mid_dma_tx_status;
-	dma->common.device_prep_dma_memcpy = intel_mid_dma_prep_memcpy;
-	dma->common.device_issue_pending = intel_mid_dma_issue_pending;
-	dma->common.device_prep_slave_sg = intel_mid_dma_prep_slave_sg;
-	dma->common.device_config = intel_mid_dma_config;
-	dma->common.device_terminate_all = intel_mid_dma_terminate_all;
-
-	/*enable dma cntrl*/
-	iowrite32(REG_BIT0, dma->dma_base + DMA_CFG);
-
-	/*register irq */
-	if (dma->pimr_mask) {
-		pr_debug("MDMA:Requesting irq shared for DMAC1\n");
-		err = request_irq(pdev->irq, intel_mid_dma_interrupt1,
-			IRQF_SHARED, "INTEL_MID_DMAC1", dma);
-		if (0 != err)
-			goto err_irq;
-	} else {
-		dma->intr_mask = 0x03;
-		pr_debug("MDMA:Requesting irq for DMAC2\n");
-		err = request_irq(pdev->irq, intel_mid_dma_interrupt2,
-			IRQF_SHARED, "INTEL_MID_DMAC2", dma);
-		if (0 != err)
-			goto err_irq;
-	}
-	/*register device w/ engine*/
-	err = dma_async_device_register(&dma->common);
-	if (0 != err) {
-		pr_err("ERR_MDMA:device_register failed: %d\n", err);
-		goto err_engine;
-	}
-	if (dma->pimr_mask) {
-		pr_debug("setting up tasklet1 for DMAC1\n");
-		tasklet_init(&dma->tasklet, dma_tasklet1, (unsigned long)dma);
-	} else {
-		pr_debug("setting up tasklet2 for DMAC2\n");
-		tasklet_init(&dma->tasklet, dma_tasklet2, (unsigned long)dma);
-	}
-	return 0;
-
-err_engine:
-	free_irq(pdev->irq, dma);
-err_irq:
-	if (dma->mask_reg)
-		iounmap(dma->mask_reg);
-err_ioremap:
-	pci_pool_destroy(dma->dma_pool);
-err_dma_pool:
-	pr_err("ERR_MDMA:setup_dma failed: %d\n", err);
-	return err;
-
-}
-
-/**
- * middma_shutdown -	Shutdown the DMA controller
- * @pdev: Controller PCI device structure
- *
- * Called by remove
- * Unregister DMa controller, clear all structures and free interrupt
- */
-static void middma_shutdown(struct pci_dev *pdev)
-{
-	struct middma_device *device = pci_get_drvdata(pdev);
-
-	dma_async_device_unregister(&device->common);
-	pci_pool_destroy(device->dma_pool);
-	if (device->mask_reg)
-		iounmap(device->mask_reg);
-	if (device->dma_base)
-		iounmap(device->dma_base);
-	free_irq(pdev->irq, device);
-	return;
-}
-
-/**
- * intel_mid_dma_probe -	PCI Probe
- * @pdev: Controller PCI device structure
- * @id: pci device id structure
- *
- * Initialize the PCI device, map BARs, query driver data.
- * Call setup_dma to complete contoller and chan initilzation
- */
-static int intel_mid_dma_probe(struct pci_dev *pdev,
-					const struct pci_device_id *id)
-{
-	struct middma_device *device;
-	u32 base_addr, bar_size;
-	struct intel_mid_dma_probe_info *info;
-	int err;
-
-	pr_debug("MDMA: probe for %x\n", pdev->device);
-	info = (void *)id->driver_data;
-	pr_debug("MDMA: CH %d, base %d, block len %d, Periphral mask %x\n",
-				info->max_chan, info->ch_base,
-				info->block_size, info->pimr_mask);
-
-	err = pci_enable_device(pdev);
-	if (err)
-		goto err_enable_device;
-
-	err = pci_request_regions(pdev, "intel_mid_dmac");
-	if (err)
-		goto err_request_regions;
-
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (err)
-		goto err_set_dma_mask;
-
-	err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (err)
-		goto err_set_dma_mask;
-
-	device = kzalloc(sizeof(*device), GFP_KERNEL);
-	if (!device) {
-		pr_err("ERR_MDMA:kzalloc failed probe\n");
-		err = -ENOMEM;
-		goto err_kzalloc;
-	}
-	device->pdev = pci_dev_get(pdev);
-
-	base_addr = pci_resource_start(pdev, 0);
-	bar_size  = pci_resource_len(pdev, 0);
-	device->dma_base = ioremap_nocache(base_addr, DMA_REG_SIZE);
-	if (!device->dma_base) {
-		pr_err("ERR_MDMA:ioremap failed\n");
-		err = -ENOMEM;
-		goto err_ioremap;
-	}
-	pci_set_drvdata(pdev, device);
-	pci_set_master(pdev);
-	device->max_chan = info->max_chan;
-	device->chan_base = info->ch_base;
-	device->block_size = info->block_size;
-	device->pimr_mask = info->pimr_mask;
-
-	err = mid_setup_dma(pdev);
-	if (err)
-		goto err_dma;
-
-	pm_runtime_put_noidle(&pdev->dev);
-	pm_runtime_allow(&pdev->dev);
-	return 0;
-
-err_dma:
-	iounmap(device->dma_base);
-err_ioremap:
-	pci_dev_put(pdev);
-	kfree(device);
-err_kzalloc:
-err_set_dma_mask:
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-err_request_regions:
-err_enable_device:
-	pr_err("ERR_MDMA:Probe failed %d\n", err);
-	return err;
-}
-
-/**
- * intel_mid_dma_remove -	PCI remove
- * @pdev: Controller PCI device structure
- *
- * Free up all resources and data
- * Call shutdown_dma to complete contoller and chan cleanup
- */
-static void intel_mid_dma_remove(struct pci_dev *pdev)
-{
-	struct middma_device *device = pci_get_drvdata(pdev);
-
-	pm_runtime_get_noresume(&pdev->dev);
-	pm_runtime_forbid(&pdev->dev);
-	middma_shutdown(pdev);
-	pci_dev_put(pdev);
-	kfree(device);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-/* Power Management */
-/*
-* dma_suspend - PCI suspend function
-*
-* @pci: PCI device structure
-* @state: PM message
-*
-* This function is called by OS when a power event occurs
-*/
-static int dma_suspend(struct device *dev)
-{
-	struct pci_dev *pci = to_pci_dev(dev);
-	int i;
-	struct middma_device *device = pci_get_drvdata(pci);
-	pr_debug("MDMA: dma_suspend called\n");
-
-	for (i = 0; i < device->max_chan; i++) {
-		if (device->ch[i].in_use)
-			return -EAGAIN;
-	}
-	dmac1_mask_periphral_intr(device);
-	device->state = SUSPENDED;
-	pci_save_state(pci);
-	pci_disable_device(pci);
-	pci_set_power_state(pci, PCI_D3hot);
-	return 0;
-}
-
-/**
-* dma_resume - PCI resume function
-*
-* @pci:	PCI device structure
-*
-* This function is called by OS when a power event occurs
-*/
-int dma_resume(struct device *dev)
-{
-	struct pci_dev *pci = to_pci_dev(dev);
-	int ret;
-	struct middma_device *device = pci_get_drvdata(pci);
-
-	pr_debug("MDMA: dma_resume called\n");
-	pci_set_power_state(pci, PCI_D0);
-	pci_restore_state(pci);
-	ret = pci_enable_device(pci);
-	if (ret) {
-		pr_err("MDMA: device can't be enabled for %x\n", pci->device);
-		return ret;
-	}
-	device->state = RUNNING;
-	iowrite32(REG_BIT0, device->dma_base + DMA_CFG);
-	return 0;
-}
-
-static int dma_runtime_suspend(struct device *dev)
-{
-	struct pci_dev *pci_dev = to_pci_dev(dev);
-	struct middma_device *device = pci_get_drvdata(pci_dev);
-
-	device->state = SUSPENDED;
-	return 0;
-}
-
-static int dma_runtime_resume(struct device *dev)
-{
-	struct pci_dev *pci_dev = to_pci_dev(dev);
-	struct middma_device *device = pci_get_drvdata(pci_dev);
-
-	device->state = RUNNING;
-	iowrite32(REG_BIT0, device->dma_base + DMA_CFG);
-	return 0;
-}
-
-static int dma_runtime_idle(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct middma_device *device = pci_get_drvdata(pdev);
-	int i;
-
-	for (i = 0; i < device->max_chan; i++) {
-		if (device->ch[i].in_use)
-			return -EAGAIN;
-	}
-
-	return 0;
-}
-
-/******************************************************************************
-* PCI stuff
-*/
-static struct pci_device_id intel_mid_dma_ids[] = {
-	{ PCI_VDEVICE(INTEL, INTEL_MID_DMAC1_ID),	INFO(2, 6, 4095, 0x200020)},
-	{ PCI_VDEVICE(INTEL, INTEL_MID_DMAC2_ID),	INFO(2, 0, 2047, 0)},
-	{ PCI_VDEVICE(INTEL, INTEL_MID_GP_DMAC2_ID),	INFO(2, 0, 2047, 0)},
-	{ PCI_VDEVICE(INTEL, INTEL_MFLD_DMAC1_ID),	INFO(4, 0, 4095, 0x400040)},
-	{ 0, }
-};
-MODULE_DEVICE_TABLE(pci, intel_mid_dma_ids);
-
-static const struct dev_pm_ops intel_mid_dma_pm = {
-	.runtime_suspend = dma_runtime_suspend,
-	.runtime_resume = dma_runtime_resume,
-	.runtime_idle = dma_runtime_idle,
-	.suspend = dma_suspend,
-	.resume = dma_resume,
-};
-
-static struct pci_driver intel_mid_dma_pci_driver = {
-	.name		=	"Intel MID DMA",
-	.id_table	=	intel_mid_dma_ids,
-	.probe		=	intel_mid_dma_probe,
-	.remove		=	intel_mid_dma_remove,
-#ifdef CONFIG_PM
-	.driver = {
-		.pm = &intel_mid_dma_pm,
-	},
-#endif
-};
-
-static int __init intel_mid_dma_init(void)
-{
-	pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n",
-			INTEL_MID_DMA_DRIVER_VERSION);
-	return pci_register_driver(&intel_mid_dma_pci_driver);
-}
-fs_initcall(intel_mid_dma_init);
-
-static void __exit intel_mid_dma_exit(void)
-{
-	pci_unregister_driver(&intel_mid_dma_pci_driver);
-}
-module_exit(intel_mid_dma_exit);
-
-MODULE_AUTHOR("Vinod Koul <vinod.koul@intel.com>");
-MODULE_DESCRIPTION("Intel (R) MID DMAC Driver");
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(INTEL_MID_DMA_DRIVER_VERSION);
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
deleted file mode 100644
index 17b42192ea58..000000000000
--- a/drivers/dma/intel_mid_dma_regs.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- *  intel_mid_dma_regs.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul@intel.com>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMAC_REGS_H__
-#define __INTEL_MID_DMAC_REGS_H__
-
-#include <linux/dmaengine.h>
-#include <linux/dmapool.h>
-#include <linux/pci_ids.h>
-
-#define INTEL_MID_DMA_DRIVER_VERSION "1.1.0"
-
-#define	REG_BIT0		0x00000001
-#define	REG_BIT8		0x00000100
-#define INT_MASK_WE		0x8
-#define CLEAR_DONE		0xFFFFEFFF
-#define UNMASK_INTR_REG(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
-
-#define ENABLE_CHANNEL(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-
-#define DISABLE_CHANNEL(chan_num) \
-	(REG_BIT8 << chan_num)
-
-#define DESCS_PER_CHANNEL	16
-/*DMA Registers*/
-/*registers associated with channel programming*/
-#define DMA_REG_SIZE		0x400
-#define DMA_CH_SIZE		0x58
-
-/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
-#define SAR			0x00 /* Source Address Register*/
-#define DAR			0x08 /* Destination Address Register*/
-#define LLP			0x10 /* Linked List Pointer Register*/
-#define CTL_LOW			0x18 /* Control Register*/
-#define CTL_HIGH		0x1C /* Control Register*/
-#define CFG_LOW			0x40 /* Configuration Register Low*/
-#define CFG_HIGH		0x44 /* Configuration Register high*/
-
-#define STATUS_TFR		0x2E8
-#define STATUS_BLOCK		0x2F0
-#define STATUS_ERR		0x308
-
-#define RAW_TFR			0x2C0
-#define RAW_BLOCK		0x2C8
-#define RAW_ERR			0x2E0
-
-#define MASK_TFR		0x310
-#define MASK_BLOCK		0x318
-#define MASK_SRC_TRAN		0x320
-#define MASK_DST_TRAN		0x328
-#define MASK_ERR		0x330
-
-#define CLEAR_TFR		0x338
-#define CLEAR_BLOCK		0x340
-#define CLEAR_SRC_TRAN		0x348
-#define CLEAR_DST_TRAN		0x350
-#define CLEAR_ERR		0x358
-
-#define INTR_STATUS		0x360
-#define DMA_CFG			0x398
-#define DMA_CHAN_EN		0x3A0
-
-/*DMA channel control registers*/
-union intel_mid_dma_ctl_lo {
-	struct {
-		u32	int_en:1;	/*enable or disable interrupts*/
-					/*should be 0*/
-		u32	dst_tr_width:3;	/*destination transfer width*/
-					/*usually 32 bits = 010*/
-		u32	src_tr_width:3; /*source transfer width*/
-					/*usually 32 bits = 010*/
-		u32	dinc:2;		/*destination address inc/dec*/
-					/*For mem:INC=00, Periphral NoINC=11*/
-		u32	sinc:2;		/*source address inc or dec, as above*/
-		u32	dst_msize:3;	/*destination burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	src_msize:3;	/*source burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	reser1:3;
-		u32	tt_fc:3;	/*transfer type and flow controller*/
-					/*M-M = 000
-					  P-M = 010
-					  M-P = 001*/
-		u32	dms:2;		/*destination master select = 0*/
-		u32	sms:2;		/*source master select = 0*/
-		u32	llp_dst_en:1;	/*enable/disable destination LLP = 0*/
-		u32	llp_src_en:1;	/*enable/disable source LLP = 0*/
-		u32	reser2:3;
-	} ctlx;
-	u32	ctl_lo;
-};
-
-union intel_mid_dma_ctl_hi {
-	struct {
-		u32	block_ts:12;	/*block transfer size*/
-		u32	done:1;		/*Done - updated by DMAC*/
-		u32	reser:19;	/*configured by DMAC*/
-	} ctlx;
-	u32	ctl_hi;
-
-};
-
-/*DMA channel configuration registers*/
-union intel_mid_dma_cfg_lo {
-	struct {
-		u32	reser1:5;
-		u32	ch_prior:3;	/*channel priority = 0*/
-		u32	ch_susp:1;	/*channel suspend = 0*/
-		u32	fifo_empty:1;	/*FIFO empty or not R bit = 0*/
-		u32	hs_sel_dst:1;	/*select HW/SW destn handshaking*/
-					/*HW = 0, SW = 1*/
-		u32	hs_sel_src:1;	/*select HW/SW src handshaking*/
-		u32	reser2:6;
-		u32	dst_hs_pol:1;	/*dest HS interface polarity*/
-		u32	src_hs_pol:1;	/*src HS interface polarity*/
-		u32	max_abrst:10;	/*max AMBA burst len = 0 (no sw limit*/
-		u32	reload_src:1;	/*auto reload src addr =1 if src is P*/
-		u32	reload_dst:1;	/*AR destn addr =1 if dstn is P*/
-	} cfgx;
-	u32	cfg_lo;
-};
-
-union intel_mid_dma_cfg_hi {
-	struct {
-		u32	fcmode:1;	/*flow control mode = 1*/
-		u32	fifo_mode:1;	/*FIFO mode select = 1*/
-		u32	protctl:3;	/*protection control = 0*/
-		u32	rsvd:2;
-		u32	src_per:4;	/*src hw HS interface*/
-		u32	dst_per:4;	/*dstn hw HS interface*/
-		u32	reser2:17;
-	} cfgx;
-	u32	cfg_hi;
-};
-
-
-/**
- * struct intel_mid_dma_chan - internal mid representation of a DMA channel
- * @chan: dma_chan strcture represetation for mid chan
- * @ch_regs: MMIO register space pointer to channel register
- * @dma_base: MMIO register space DMA engine base pointer
- * @ch_id: DMA channel id
- * @lock: channel spinlock
- * @active_list: current active descriptors
- * @queue: current queued up descriptors
- * @free_list: current free descriptors
- * @slave: dma slave structure
- * @descs_allocated: total number of descriptors allocated
- * @dma: dma device structure pointer
- * @busy: bool representing if ch is busy (active txn) or not
- * @in_use: bool representing if ch is in use or not
- * @raw_tfr: raw trf interrupt received
- * @raw_block: raw block interrupt received
- */
-struct intel_mid_dma_chan {
-	struct dma_chan		chan;
-	void __iomem		*ch_regs;
-	void __iomem		*dma_base;
-	int			ch_id;
-	spinlock_t		lock;
-	struct list_head	active_list;
-	struct list_head	queue;
-	struct list_head	free_list;
-	unsigned int		descs_allocated;
-	struct middma_device	*dma;
-	bool			busy;
-	bool			in_use;
-	u32			raw_tfr;
-	u32			raw_block;
-	struct intel_mid_dma_slave *mid_slave;
-};
-
-static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
-						struct dma_chan *chan)
-{
-	return container_of(chan, struct intel_mid_dma_chan, chan);
-}
-
-enum intel_mid_dma_state {
-	RUNNING = 0,
-	SUSPENDED,
-};
-/**
- * struct middma_device - internal representation of a DMA device
- * @pdev: PCI device
- * @dma_base: MMIO register space pointer of DMA
- * @dma_pool: for allocating DMA descriptors
- * @common: embedded struct dma_device
- * @tasklet: dma tasklet for processing interrupts
- * @ch: per channel data
- * @pci_id: DMA device PCI ID
- * @intr_mask: Interrupt mask to be used
- * @mask_reg: MMIO register for periphral mask
- * @chan_base: Base ch index (read from driver data)
- * @max_chan: max number of chs supported (from drv_data)
- * @block_size: Block size of DMA transfer supported (from drv_data)
- * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data)
- * @state: dma PM device state
- */
-struct middma_device {
-	struct pci_dev		*pdev;
-	void __iomem		*dma_base;
-	struct pci_pool		*dma_pool;
-	struct dma_device	common;
-	struct tasklet_struct   tasklet;
-	struct intel_mid_dma_chan ch[MAX_CHAN];
-	unsigned int		pci_id;
-	unsigned int		intr_mask;
-	void __iomem		*mask_reg;
-	int			chan_base;
-	int			max_chan;
-	int			block_size;
-	unsigned int		pimr_mask;
-	enum intel_mid_dma_state state;
-};
-
-static inline struct middma_device *to_middma_device(struct dma_device *common)
-{
-	return container_of(common, struct middma_device, common);
-}
-
-struct intel_mid_dma_desc {
-	void __iomem			*block; /*ch ptr*/
-	struct list_head		desc_node;
-	struct dma_async_tx_descriptor	txd;
-	size_t				len;
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	u32				cfg_hi;
-	u32				cfg_lo;
-	u32				ctl_lo;
-	u32				ctl_hi;
-	struct pci_pool			*lli_pool;
-	struct intel_mid_dma_lli	*lli;
-	dma_addr_t			lli_phys;
-	unsigned int			lli_length;
-	unsigned int			current_lli;
-	dma_addr_t			next;
-	enum dma_transfer_direction		dirn;
-	enum dma_status			status;
-	enum dma_slave_buswidth		width; /*width of DMA txn*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-
-};
-
-struct intel_mid_dma_lli {
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	dma_addr_t			llp;
-	u32				ctl_lo;
-	u32				ctl_hi;
-} __attribute__ ((packed));
-
-static inline int test_ch_en(void __iomem *dma, u32 ch_no)
-{
-	u32 en_reg = ioread32(dma + DMA_CHAN_EN);
-	return (en_reg >> ch_no) & 0x1;
-}
-
-static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc
-		(struct dma_async_tx_descriptor *txd)
-{
-	return container_of(txd, struct intel_mid_dma_desc, txd);
-}
-
-static inline struct intel_mid_dma_slave *to_intel_mid_dma_slave
-		(struct dma_slave_config *slave)
-{
-	return container_of(slave, struct intel_mid_dma_slave, dma_slave);
-}
-
-
-int dma_resume(struct device *dev);
-
-#endif /*__INTEL_MID_DMAC_REGS_H__*/