summaryrefslogtreecommitdiff
path: root/drivers/crypto/mv_cesa.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-14 21:52:09 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-14 21:52:09 +0300
commit37dc79565c4b7e735f190eaa6ed5bb6eb3d3968a (patch)
tree4f20cc3c9240c5759f72bf560b596a809173ee29 /drivers/crypto/mv_cesa.h
parent894025f24bd028942da3e602b87d9f7223109b14 (diff)
parent1d9ddde12e3c9bab7f3d3484eb9446315e3571ca (diff)
downloadlinux-37dc79565c4b7e735f190eaa6ed5bb6eb3d3968a.tar.xz
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
Diffstat (limited to 'drivers/crypto/mv_cesa.h')
-rw-r--r--drivers/crypto/mv_cesa.h151
1 files changed, 0 insertions, 151 deletions
diff --git a/drivers/crypto/mv_cesa.h b/drivers/crypto/mv_cesa.h
deleted file mode 100644
index 0be3f0aa4afd..000000000000
--- a/drivers/crypto/mv_cesa.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MV_CRYPTO_H__
-#define __MV_CRYPTO_H__
-
-#define DIGEST_INITIAL_VAL_A 0xdd00
-#define DIGEST_INITIAL_VAL_B 0xdd04
-#define DIGEST_INITIAL_VAL_C 0xdd08
-#define DIGEST_INITIAL_VAL_D 0xdd0c
-#define DIGEST_INITIAL_VAL_E 0xdd10
-#define DES_CMD_REG 0xdd58
-
-#define SEC_ACCEL_CMD 0xde00
-#define SEC_CMD_EN_SEC_ACCL0 (1 << 0)
-#define SEC_CMD_EN_SEC_ACCL1 (1 << 1)
-#define SEC_CMD_DISABLE_SEC (1 << 2)
-
-#define SEC_ACCEL_DESC_P0 0xde04
-#define SEC_DESC_P0_PTR(x) (x)
-
-#define SEC_ACCEL_DESC_P1 0xde14
-#define SEC_DESC_P1_PTR(x) (x)
-
-#define SEC_ACCEL_CFG 0xde08
-#define SEC_CFG_STOP_DIG_ERR (1 << 0)
-#define SEC_CFG_CH0_W_IDMA (1 << 7)
-#define SEC_CFG_CH1_W_IDMA (1 << 8)
-#define SEC_CFG_ACT_CH0_IDMA (1 << 9)
-#define SEC_CFG_ACT_CH1_IDMA (1 << 10)
-
-#define SEC_ACCEL_STATUS 0xde0c
-#define SEC_ST_ACT_0 (1 << 0)
-#define SEC_ST_ACT_1 (1 << 1)
-
-/*
- * FPGA_INT_STATUS looks like a FPGA leftover and is documented only in Errata
- * 4.12. It looks like that it was part of an IRQ-controller in FPGA and
- * someone forgot to remove it while switching to the core and moving to
- * SEC_ACCEL_INT_STATUS.
- */
-#define FPGA_INT_STATUS 0xdd68
-#define SEC_ACCEL_INT_STATUS 0xde20
-#define SEC_INT_AUTH_DONE (1 << 0)
-#define SEC_INT_DES_E_DONE (1 << 1)
-#define SEC_INT_AES_E_DONE (1 << 2)
-#define SEC_INT_AES_D_DONE (1 << 3)
-#define SEC_INT_ENC_DONE (1 << 4)
-#define SEC_INT_ACCEL0_DONE (1 << 5)
-#define SEC_INT_ACCEL1_DONE (1 << 6)
-#define SEC_INT_ACC0_IDMA_DONE (1 << 7)
-#define SEC_INT_ACC1_IDMA_DONE (1 << 8)
-
-#define SEC_ACCEL_INT_MASK 0xde24
-
-#define AES_KEY_LEN (8 * 4)
-
-struct sec_accel_config {
-
- u32 config;
-#define CFG_OP_MAC_ONLY 0
-#define CFG_OP_CRYPT_ONLY 1
-#define CFG_OP_MAC_CRYPT 2
-#define CFG_OP_CRYPT_MAC 3
-#define CFG_MACM_MD5 (4 << 4)
-#define CFG_MACM_SHA1 (5 << 4)
-#define CFG_MACM_HMAC_MD5 (6 << 4)
-#define CFG_MACM_HMAC_SHA1 (7 << 4)
-#define CFG_ENCM_DES (1 << 8)
-#define CFG_ENCM_3DES (2 << 8)
-#define CFG_ENCM_AES (3 << 8)
-#define CFG_DIR_ENC (0 << 12)
-#define CFG_DIR_DEC (1 << 12)
-#define CFG_ENC_MODE_ECB (0 << 16)
-#define CFG_ENC_MODE_CBC (1 << 16)
-#define CFG_3DES_EEE (0 << 20)
-#define CFG_3DES_EDE (1 << 20)
-#define CFG_AES_LEN_128 (0 << 24)
-#define CFG_AES_LEN_192 (1 << 24)
-#define CFG_AES_LEN_256 (2 << 24)
-#define CFG_NOT_FRAG (0 << 30)
-#define CFG_FIRST_FRAG (1 << 30)
-#define CFG_LAST_FRAG (2 << 30)
-#define CFG_MID_FRAG (3 << 30)
-
- u32 enc_p;
-#define ENC_P_SRC(x) (x)
-#define ENC_P_DST(x) ((x) << 16)
-
- u32 enc_len;
-#define ENC_LEN(x) (x)
-
- u32 enc_key_p;
-#define ENC_KEY_P(x) (x)
-
- u32 enc_iv;
-#define ENC_IV_POINT(x) ((x) << 0)
-#define ENC_IV_BUF_POINT(x) ((x) << 16)
-
- u32 mac_src_p;
-#define MAC_SRC_DATA_P(x) (x)
-#define MAC_SRC_TOTAL_LEN(x) ((x) << 16)
-
- u32 mac_digest;
-#define MAC_DIGEST_P(x) (x)
-#define MAC_FRAG_LEN(x) ((x) << 16)
- u32 mac_iv;
-#define MAC_INNER_IV_P(x) (x)
-#define MAC_OUTER_IV_P(x) ((x) << 16)
-}__attribute__ ((packed));
- /*
- * /-----------\ 0
- * | ACCEL CFG | 4 * 8
- * |-----------| 0x20
- * | CRYPT KEY | 8 * 4
- * |-----------| 0x40
- * | IV IN | 4 * 4
- * |-----------| 0x40 (inplace)
- * | IV BUF | 4 * 4
- * |-----------| 0x80
- * | DATA IN | 16 * x (max ->max_req_size)
- * |-----------| 0x80 (inplace operation)
- * | DATA OUT | 16 * x (max ->max_req_size)
- * \-----------/ SRAM size
- */
-
- /* Hashing memory map:
- * /-----------\ 0
- * | ACCEL CFG | 4 * 8
- * |-----------| 0x20
- * | Inner IV | 5 * 4
- * |-----------| 0x34
- * | Outer IV | 5 * 4
- * |-----------| 0x48
- * | Output BUF| 5 * 4
- * |-----------| 0x80
- * | DATA IN | 64 * x (max ->max_req_size)
- * \-----------/ SRAM size
- */
-#define SRAM_CONFIG 0x00
-#define SRAM_DATA_KEY_P 0x20
-#define SRAM_DATA_IV 0x40
-#define SRAM_DATA_IV_BUF 0x40
-#define SRAM_DATA_IN_START 0x80
-#define SRAM_DATA_OUT_START 0x80
-
-#define SRAM_HMAC_IV_IN 0x20
-#define SRAM_HMAC_IV_OUT 0x34
-#define SRAM_DIGEST_BUF 0x48
-
-#define SRAM_CFG_SPACE 0x80
-
-#endif