Merge tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull support for three new arm SoC types from Arnd Bergmann:

 - The mvebu platform includes Marvell's Armada XP and Armada 370 chips,
   made by the mvebu business unit inside of Marvell.  Since the same
   group also made the older but similar platforms we call "orion5x",
   "kirkwood", "mv78xx0" and "dove", we plan to move all of them into
   the mach-mvebu directory in the future.

 - socfpga is Altera's platform based on Cortex-A9 cores and a lot of
   FPGA space.  This is similar to the Xilinx zynq platform we already
   support.  The code is particularly clean, which is helped by the fact
   that the hardware doesn't do much besides the parts that are expected
   to get added in the FPGA.

 - The OMAP subarchitecture gains support for the latest generation, the
   OMAP5 based on the new Cortex-A15 core.  Support is rather
   rudimentary for now, but will be extended in the future.

* tag 'newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  ARM: socfpga: initial support for Altera's SOCFPGA platform
  arm: mvebu: generate DTBs for supported SoCs
  ARM: mvebu: MPIC: read number of interrupts from control register
  arm: mach-mvebu: add entry to MAINTAINERS
  arm: mach-mvebu: add compilation/configuration change
  arm: mach-mvebu: add defconfig
  arm: mach-mvebu: add documentation for new device tree bindings
  arm: mach-mvebu: add support for Armada 370 and Armada XP with DT
  arm: mach-mvebu: add source files
  arm: mach-mvebu: add header
  clocksource: time-armada-370-xp: Marvell Armada 370/XP SoC timer driver
  ARM: Kconfig update to support additional GPIOs in OMAP5
  ARM: OMAP5: Add the build support
  arm/dts: OMAP5: Add omap5 dts files
  ARM: OMAP5: board-generic: Add device tree support
  ARM: omap2+: board-generic: clean up the irq data from board file
  ARM: OMAP5: Add SMP support
  ARM: OMAP5: Add the WakeupGen IP updates
  ARM: OMAP5: l3: Add l3 error handler support for omap5
  ARM: OMAP5: gpmc: Update gpmc_init()
  ...

Conflicts:
	Documentation/devicetree/bindings/arm/omap/omap.txt
	arch/arm/mach-omap2/Makefile
	drivers/clocksource/Kconfig
	drivers/clocksource/Makefile

3 files changed, 231 insertions, 1 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index e62bc7e9d49b..d53cd0afc200 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -19,6 +19,9 @@ config DW_APB_TIMER
 config DW_APB_TIMER_OF
 	bool
 
+config ARMADA_370_XP_TIMER
+	bool
+
 config CLKSRC_DBX500_PRCMU
 	bool "Clocksource PRCMU Timer"
 	depends on UX500_SOC_DB8500
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 2cdaf7d1019f..b65d0c56ab35 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -11,4 +11,5 @@ obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
 obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
-obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
\ No newline at end of file
+obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
+obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
new file mode 100644
index 000000000000..4674f94957cd
--- /dev/null
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -0,0 +1,226 @@
+/*
+ * Marvell Armada 370/XP SoC timer handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <asm/sched_clock.h>
+
+/*
+ * Timer block registers.
+ */
+#define TIMER_CTRL_OFF		0x0000
+#define  TIMER0_EN		 0x0001
+#define  TIMER0_RELOAD_EN	 0x0002
+#define  TIMER0_25MHZ            0x0800
+#define  TIMER0_DIV(div)         ((div) << 19)
+#define  TIMER1_EN		 0x0004
+#define  TIMER1_RELOAD_EN	 0x0008
+#define  TIMER1_25MHZ            0x1000
+#define  TIMER1_DIV(div)         ((div) << 22)
+#define TIMER_EVENTS_STATUS	0x0004
+#define  TIMER0_CLR_MASK         (~0x1)
+#define  TIMER1_CLR_MASK         (~0x100)
+#define TIMER0_RELOAD_OFF	0x0010
+#define TIMER0_VAL_OFF		0x0014
+#define TIMER1_RELOAD_OFF	0x0018
+#define TIMER1_VAL_OFF		0x001c
+
+/* Global timers are connected to the coherency fabric clock, and the
+   below divider reduces their incrementing frequency. */
+#define TIMER_DIVIDER_SHIFT     5
+#define TIMER_DIVIDER           (1 << TIMER_DIVIDER_SHIFT)
+
+/*
+ * SoC-specific data.
+ */
+static void __iomem *timer_base;
+static int timer_irq;
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
+
+static u32 notrace armada_370_xp_read_sched_clock(void)
+{
+	return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+/*
+ * Clockevent handling.
+ */
+static int
+armada_370_xp_clkevt_next_event(unsigned long delta,
+				struct clock_event_device *dev)
+{
+	u32 u;
+
+	/*
+	 * Clear clockevent timer interrupt.
+	 */
+	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+	/*
+	 * Setup new clockevent timer value.
+	 */
+	writel(delta, timer_base + TIMER1_VAL_OFF);
+
+	/*
+	 * Enable the timer.
+	 */
+	u = readl(timer_base + TIMER_CTRL_OFF);
+	u = ((u & ~TIMER1_RELOAD_EN) | TIMER1_EN |
+	     TIMER1_DIV(TIMER_DIVIDER_SHIFT));
+	writel(u, timer_base + TIMER_CTRL_OFF);
+
+	return 0;
+}
+
+static void
+armada_370_xp_clkevt_mode(enum clock_event_mode mode,
+			  struct clock_event_device *dev)
+{
+	u32 u;
+
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		/*
+		 * Setup timer to fire at 1/HZ intervals.
+		 */
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+		writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
+
+		/*
+		 * Enable timer.
+		 */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+
+		writel((u | TIMER1_EN | TIMER1_RELOAD_EN |
+			TIMER1_DIV(TIMER_DIVIDER_SHIFT)),
+		       timer_base + TIMER_CTRL_OFF);
+	} else {
+		/*
+		 * Disable timer.
+		 */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
+
+		/*
+		 * ACK pending timer interrupt.
+		 */
+		writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+
+	}
+}
+
+static struct clock_event_device armada_370_xp_clkevt = {
+	.name		= "armada_370_xp_tick",
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 300,
+	.set_next_event	= armada_370_xp_clkevt_next_event,
+	.set_mode	= armada_370_xp_clkevt_mode,
+};
+
+static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id)
+{
+	/*
+	 * ACK timer interrupt and call event handler.
+	 */
+
+	writel(TIMER1_CLR_MASK, timer_base + TIMER_EVENTS_STATUS);
+	armada_370_xp_clkevt.event_handler(&armada_370_xp_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction armada_370_xp_timer_irq = {
+	.name		= "armada_370_xp_tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= armada_370_xp_timer_interrupt
+};
+
+void __init armada_370_xp_timer_init(void)
+{
+	u32 u;
+	struct device_node *np;
+	unsigned int timer_clk;
+	int ret;
+	np = of_find_compatible_node(NULL, NULL, "marvell,armada-370-xp-timer");
+	timer_base = of_iomap(np, 0);
+	WARN_ON(!timer_base);
+
+	if (of_find_property(np, "marvell,timer-25Mhz", NULL)) {
+		/* The fixed 25MHz timer is available so let's use it */
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u | TIMER0_25MHZ | TIMER1_25MHZ,
+		       timer_base + TIMER_CTRL_OFF);
+		timer_clk = 25000000;
+	} else {
+		u32 clk = 0;
+		ret = of_property_read_u32(np, "clock-frequency", &clk);
+		WARN_ON(!clk || ret < 0);
+		u = readl(timer_base + TIMER_CTRL_OFF);
+		writel(u & ~(TIMER0_25MHZ | TIMER1_25MHZ),
+		       timer_base + TIMER_CTRL_OFF);
+		timer_clk = clk / TIMER_DIVIDER;
+	}
+
+	/* We use timer 0 as clocksource, and timer 1 for
+	   clockevents */
+	timer_irq = irq_of_parse_and_map(np, 1);
+
+	ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
+
+	/*
+	 * Set scale and timer for sched_clock.
+	 */
+	setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk);
+
+	/*
+	 * Setup free-running clocksource timer (interrupts
+	 * disabled).
+	 */
+	writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+	writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+
+	u = readl(timer_base + TIMER_CTRL_OFF);
+
+	writel((u | TIMER0_EN | TIMER0_RELOAD_EN |
+		TIMER0_DIV(TIMER_DIVIDER_SHIFT)), timer_base + TIMER_CTRL_OFF);
+
+	clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
+			      "armada_370_xp_clocksource",
+			      timer_clk, 300, 32, clocksource_mmio_readl_down);
+
+	/*
+	 * Setup clockevent timer (interrupt-driven).
+	 */
+	setup_irq(timer_irq, &armada_370_xp_timer_irq);
+	armada_370_xp_clkevt.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&armada_370_xp_clkevt,
+					timer_clk, 1, 0xfffffffe);
+}
+