Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "One new platform gets added, the Realtek RTD1195, which is an older
  Cortex-a7 based relative of the RTD12xx chips that are already
  supported in arch/arm64. The platform may also be extended to support
  running 32-bit kernels on those 64-bit chips for memory-constrained
  machines.

  In the Renesas shmobile platform, we gain support for "RZ/G1H" or
  R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
  originally released in 2016 as one of the last high-end 32-bit
  designs.

  There is ongoing cleanup for the integrator, tegra, imx, and omap2
  platforms, with integrator getting very close to the goal of having
  zero code in arch/arm/, and omap2 moving more of the chip specifics
  from old board code into device tree files.

  The Versatile Express platform is made more modular, with built-in
  drivers now becoming loadable modules. This is part of a greater
  effort for the Android OS to have a common kernel binary for all
  platforms and any platform specific code in loadable modules.

  The PXA platform drops support for Compulab's pxa2xx boards that had
  rather unusual flash and PCI drivers but no known users remaining. All
  device drivers specific to those boards can now get removed as well.

  Across platforms, there is ongoing cleanup, with Geert and Rob
  revisiting some a lot of Kconfig options"

* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
  ARM: omap2: fix omap5_realtime_timer_init definition
  ARM: zynq: Don't select CONFIG_ICST
  ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
  clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
  ARM: davinci: fix build failure without I2C
  power: reset: vexpress: fix build issue
  power: vexpress: cleanup: use builtin_platform_driver
  power: vexpress: add suppress_bind_attrs to true
  Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
  MAINTAINERS: pxa: remove Compulab arm/pxa support
  ARM: pxa: remove Compulab pxa2xx boards
  bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
  soc: imx: move cpu code to drivers/soc/imx
  ARM: imx: move cpu definitions into a header
  ARM: imx: use device_initcall for imx_soc_device_init
  ARM: imx: pcm037: make pcm970_sja1000_platform_data static
  bus: ti-sysc: Timers no longer need legacy quirk handling
  ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
  ARM: dts: Configure system timers for omap2
  ARM: dts: Configure system timers for ti81xx
  ...

1 files changed, 0 insertions, 121 deletions

diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index f9f4babe3ca6..ca798249544d 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -8,7 +8,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <linux/platform_data/clk-integrator.h>
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
@@ -20,26 +19,6 @@
 #define IMPD1_OSC2	0x04
 #define IMPD1_LOCK	0x08
 
-struct impd1_clk {
-	char *pclkname;
-	struct clk *pclk;
-	char *vco1name;
-	struct clk *vco1clk;
-	char *vco2name;
-	struct clk *vco2clk;
-	struct clk *mmciclk;
-	char *uartname;
-	struct clk *uartclk;
-	char *spiname;
-	struct clk *spiclk;
-	char *scname;
-	struct clk *scclk;
-	struct clk_lookup *clks[15];
-};
-
-/* One entry for each connected IM-PD1 LM */
-static struct impd1_clk impd1_clks[4];
-
 /*
  * There are two VCO's on the IM-PD1
  */
@@ -80,106 +59,6 @@ static const struct clk_icst_desc impd1_icst2_desc = {
 	.lock_offset = IMPD1_LOCK,
 };
 
-/**
- * integrator_impd1_clk_init() - set up the integrator clock tree
- * @base: base address of the logic module (LM)
- * @id: the ID of this LM
- */
-void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
-{
-	struct impd1_clk *imc;
-	struct clk *clk;
-	struct clk *pclk;
-	int i;
-
-	if (id > 3) {
-		pr_crit("no more than 4 LMs can be attached\n");
-		return;
-	}
-	imc = &impd1_clks[id];
-
-	/* Register the fixed rate PCLK */
-	imc->pclkname = kasprintf(GFP_KERNEL, "lm%x-pclk", id);
-	pclk = clk_register_fixed_rate(NULL, imc->pclkname, NULL, 0, 0);
-	imc->pclk = pclk;
-
-	imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id);
-	clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, NULL,
-				base);
-	imc->vco1clk = clk;
-	imc->clks[0] = clkdev_alloc(pclk, "apb_pclk", "lm%x:01000", id);
-	imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
-
-	/* VCO2 is also called "CLK2" */
-	imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id);
-	clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, NULL,
-				base);
-	imc->vco2clk = clk;
-
-	/* MMCI uses CLK2 right off */
-	imc->clks[2] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00700", id);
-	imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00700", id);
-
-	/* UART reference clock divides CLK2 by a fixed factor 4 */
-	imc->uartname = kasprintf(GFP_KERNEL, "lm%x-uartclk", id);
-	clk = clk_register_fixed_factor(NULL, imc->uartname, imc->vco2name,
-				   CLK_IGNORE_UNUSED, 1, 4);
-	imc->uartclk = clk;
-	imc->clks[4] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00100", id);
-	imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
-	imc->clks[6] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00200", id);
-	imc->clks[7] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
-
-	/* SPI PL022 clock divides CLK2 by a fixed factor 64 */
-	imc->spiname = kasprintf(GFP_KERNEL, "lm%x-spiclk", id);
-	clk = clk_register_fixed_factor(NULL, imc->spiname, imc->vco2name,
-				   CLK_IGNORE_UNUSED, 1, 64);
-	imc->clks[8] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00300", id);
-	imc->clks[9] = clkdev_alloc(clk, NULL, "lm%x:00300", id);
-
-	/* The GPIO blocks and AACI have only PCLK */
-	imc->clks[10] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00400", id);
-	imc->clks[11] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00500", id);
-	imc->clks[12] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00800", id);
-
-	/* Smart Card clock divides CLK2 by a fixed factor 4 */
-	imc->scname = kasprintf(GFP_KERNEL, "lm%x-scclk", id);
-	clk = clk_register_fixed_factor(NULL, imc->scname, imc->vco2name,
-				   CLK_IGNORE_UNUSED, 1, 4);
-	imc->scclk = clk;
-	imc->clks[13] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00600", id);
-	imc->clks[14] = clkdev_alloc(clk, NULL, "lm%x:00600", id);
-
-	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
-		clkdev_add(imc->clks[i]);
-}
-EXPORT_SYMBOL_GPL(integrator_impd1_clk_init);
-
-void integrator_impd1_clk_exit(unsigned int id)
-{
-	int i;
-	struct impd1_clk *imc;
-
-	if (id > 3)
-		return;
-	imc = &impd1_clks[id];
-
-	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
-		clkdev_drop(imc->clks[i]);
-	clk_unregister(imc->spiclk);
-	clk_unregister(imc->uartclk);
-	clk_unregister(imc->vco2clk);
-	clk_unregister(imc->vco1clk);
-	clk_unregister(imc->pclk);
-	kfree(imc->scname);
-	kfree(imc->spiname);
-	kfree(imc->uartname);
-	kfree(imc->vco2name);
-	kfree(imc->vco1name);
-	kfree(imc->pclkname);
-}
-EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit);
-
 static int integrator_impd1_clk_spawn(struct device *dev,
 				      struct device_node *parent,
 				      struct device_node *np)