Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we have a good set of changes to the core framework that do
  some general cleanups, but nothing too major. The majority of the diff
  goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
  introduced for Actions Semi so it takes up some lines to add all the
  different types, and the Qualcomm diff is there because we add support
  for two SoCs and it's quite a bit of data.

  Otherwise the big driver updates are on TI Davinci and Amlogic
  platforms. And then the long tail of driver updates for various fixes
  and stuff follows after that.

  Core:
   - debugfs cleanups removing error checking and an unused provider API
   - Removal of a clk init typedef that isn't used
   - Usage of match_string() to simplify parent string name matching
   - OF clk helpers moved to their own file (linux/of_clk.h)
   - Make clk warnings more readable across kernel versions

  New Drivers:
   - Qualcomm SDM845 GCC and Video clk controllers
   - Qualcomm MSM8998 GCC
   - Actions Semi S900 SoC support
   - Nuvoton npcm750 microcontroller clks
   - Amlogic axg AO clock controller

  Removed Drivers:
   - Deprecated Rockchip clk-gate driver

  Updates:
   - debugfs functions stopped checking return values
   - Support for the MSIOF module clocks on Rensas R-Car M3-N
   - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
   - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
   - Berlin and Amlogic SPDX tagging
   - Usage of of_clk_get_parent_count() in more places
   - Proper implementation of the CDEV1/2 clocks on Tegra20
   - Allwinner H6 PRCM clock support and R40 EMAC support
   - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
   - Round closest support for meson's mpll driver
   - Support for meson8b nand clocks and gxbb video decoder clocks
   - Mediatek mali clks
   - STM32MP1 fixes
   - Uniphier LD11/LD20 stream demux system clock"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  clk: qcom: Export clk_fabia_pll_configure()
  clk: bcm: Update and add Stingray clock entries
  dt-bindings: clk: Update Stingray binding doc
  clk-si544: Properly round requested frequency to nearest match
  clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
  clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
  clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
  clk: ingenic: jz4770: Change OTG from custom to standard gated clock
  clk: ingenic: Support specifying "wait for clock stable" delay
  clk: ingenic: Add support for clocks whose gate bit is inverted
  clk: use match_string() helper
  clk: bcm2835: use match_string() helper
  clk: Return void from debug_init op
  clk: remove clk_debugfs_add_file()
  clk: tegra: no need to check return value of debugfs_create functions
  clk: davinci: no need to check return value of debugfs_create functions
  clk: bcm2835: no need to check return value of debugfs_create functions
  clk: no need to check return value of debugfs_create functions
  clk: imx6: add EPIT clock support
  clk: mvebu: use correct bit for 98DX3236 NAND
  ...

1 files changed, 207 insertions, 0 deletions

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
new file mode 100644
index 000000000000..27554eaf6929
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-h6-r.h"
+
+/*
+ * Information about AR100 and AHB/APB clocks in R_CCU are gathered from
+ * clock definitions in the BSP source code.
+ */
+
+static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k",
+					     "pll-periph0", "iosc" };
+static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = {
+	{ .index = 2, .shift = 0, .width = 5 },
+};
+
+static struct ccu_div ar100_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= ar100_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ar100_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x000,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("ar100",
+						      ar100_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static CLK_FIXED_FACTOR(r_ahb_clk, "r-ahb", "ar100", 1, 1, 0);
+
+static struct ccu_div r_apb1_clk = {
+	.div		= _SUNXI_CCU_DIV(0, 2),
+
+	.common		= {
+		.reg		= 0x00c,
+		.hw.init	= CLK_HW_INIT("r-apb1",
+					      "r-ahb",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static struct ccu_div r_apb2_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= ar100_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ar100_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x010,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("r-apb2",
+						      ar100_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+/*
+ * Information about the gate/resets are gathered from the clock header file
+ * in the BSP source code, although most of them are unused. The existence
+ * of the hardware block is verified with "3.1 Memory Mapping" chapter in
+ * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified
+ * with "3.3.2.1 System Bus Tree" chapter inthe same document.
+ */
+static SUNXI_CCU_GATE(r_apb1_timer_clk,	"r-apb1-timer",	"r-apb1",
+		      0x11c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_twd_clk,	"r-apb1-twd",	"r-apb1",
+		      0x12c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_pwm_clk,	"r-apb1-pwm",	"r-apb1",
+		      0x13c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb2_uart_clk,	"r-apb2-uart",	"r-apb2",
+		      0x18c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb2_i2c_clk,	"r-apb2-i2c",	"r-apb2",
+		      0x19c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_ir_clk,	"r-apb1-ir",	"r-apb1",
+		      0x1cc, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb1_w1_clk,	"r-apb1-w1",	"r-apb1",
+		      0x1cc, BIT(0), 0);
+
+/* Information of IR(RX) mod clock is gathered from BSP source code */
+static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
+				  r_mod0_default_parents, 0x1c0,
+				  0, 5,		/* M */
+				  8, 2,		/* P */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+/*
+ * BSP didn't use the 1-wire function at all now, and the information about
+ * this mod clock is guessed from the IR mod clock above. The existence of
+ * this mod clock is proven by BSP clock header, and the dividers are verified
+ * by contents in the 1-wire related chapter of the User Manual.
+ */
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1",
+				  r_mod0_default_parents, 0x1e0,
+				  0, 5,		/* M */
+				  8, 2,		/* P */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static struct ccu_common *sun50i_h6_r_ccu_clks[] = {
+	&ar100_clk.common,
+	&r_apb1_clk.common,
+	&r_apb2_clk.common,
+	&r_apb1_timer_clk.common,
+	&r_apb1_twd_clk.common,
+	&r_apb1_pwm_clk.common,
+	&r_apb2_uart_clk.common,
+	&r_apb2_i2c_clk.common,
+	&r_apb1_ir_clk.common,
+	&r_apb1_w1_clk.common,
+	&ir_clk.common,
+	&w1_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
+	.hws	= {
+		[CLK_AR100]		= &ar100_clk.common.hw,
+		[CLK_R_AHB]		= &r_ahb_clk.hw,
+		[CLK_R_APB1]		= &r_apb1_clk.common.hw,
+		[CLK_R_APB2]		= &r_apb2_clk.common.hw,
+		[CLK_R_APB1_TIMER]	= &r_apb1_timer_clk.common.hw,
+		[CLK_R_APB1_TWD]	= &r_apb1_twd_clk.common.hw,
+		[CLK_R_APB1_PWM]	= &r_apb1_pwm_clk.common.hw,
+		[CLK_R_APB2_UART]	= &r_apb2_uart_clk.common.hw,
+		[CLK_R_APB2_I2C]	= &r_apb2_i2c_clk.common.hw,
+		[CLK_R_APB1_IR]		= &r_apb1_ir_clk.common.hw,
+		[CLK_R_APB1_W1]		= &r_apb1_w1_clk.common.hw,
+		[CLK_IR]		= &ir_clk.common.hw,
+		[CLK_W1]		= &w1_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = {
+	[RST_R_APB1_TIMER]	=  { 0x11c, BIT(16) },
+	[RST_R_APB1_TWD]	=  { 0x12c, BIT(16) },
+	[RST_R_APB1_PWM]	=  { 0x13c, BIT(16) },
+	[RST_R_APB2_UART]	=  { 0x18c, BIT(16) },
+	[RST_R_APB2_I2C]	=  { 0x19c, BIT(16) },
+	[RST_R_APB1_IR]		=  { 0x1cc, BIT(16) },
+	[RST_R_APB1_W1]		=  { 0x1ec, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = {
+	.ccu_clks	= sun50i_h6_r_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_r_ccu_clks),
+
+	.hw_clks	= &sun50i_h6_r_hw_clks,
+
+	.resets		= sun50i_h6_r_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h6_r_ccu_resets),
+};
+
+static void __init sunxi_r_ccu_init(struct device_node *node,
+				    const struct sunxi_ccu_desc *desc)
+{
+	void __iomem *reg;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%pOF: Could not map the clock registers\n", node);
+		return;
+	}
+
+	sunxi_ccu_probe(node, reg, desc);
+}
+
+static void __init sun50i_h6_r_ccu_setup(struct device_node *node)
+{
+	sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc);
+}
+CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu",
+	       sun50i_h6_r_ccu_setup);