summaryrefslogtreecommitdiff
path: root/drivers/clk/samsung/clk-exynos3250.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-03 03:15:12 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-03 03:15:12 +0400
commit825f4e0271b0de3f7f31d963dcdaa0056fe9b73a (patch)
treeaef1f198da011a96fefbe9851137ca17afd929a4 /drivers/clk/samsung/clk-exynos3250.c
parent0a58471541cc823ef8056d23945c39fec154481c (diff)
parentb5b9324a6296bd0176fe1f8e06a1220207bd1bd3 (diff)
downloadlinux-825f4e0271b0de3f7f31d963dcdaa0056fe9b73a.tar.xz
Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull part one of ARM SoC updates from Olof Johansson: "A quite large set of SoC updates this cycle. In no particular order: - Multi-cluster power management for Samsung Exynos, adding support for big.LITTLE CPU switching on EXYNOS5 - SMP support for Marvell Armada 375 and 38x - SMP rework on Allwinner A31 - Xilinx Zynq support for SOC_BUS, big endian - Marvell orion5x platform cleanup, modernizing the implementation and moving to DT. - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so that their platform can be enabled in the same kernel binary as most of the other v7 platforms in the tree. \o/ The work isn't quite complete, there's some driver fixes still needed, but the basics now work. New SoC support added: - Freescale i.MX6SX - LSI Axxia AXM55xx SoCs - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800 - STi STIH407 plus a large set of various smaller updates for different platforms. I'm probably missing some important one here" * tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits) ARM: exynos: don't run exynos4 l2x0 setup on other platforms ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug ARM: EXYNOS: mcpm rename the power_down_finish ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC ARM: EXYNOS: Enable multi-platform build support ARM: EXYNOS: Consolidate Kconfig entries ARM: EXYNOS: Add support for EXYNOS5410 SoC ARM: EXYNOS: Support secondary CPU boot of Exynos3250 ARM: EXYNOS: Add Exynos3250 SoC ID ARM: EXYNOS: Add 5800 SoC support ARM: EXYNOS: initial board support for exynos5260 SoC clk: exynos5410: register clocks using common clock framework ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084 ARM: sunxi: allow building without reset controller Documentation: devicetree: arm: sort enable-method entries ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks ARM: dts: axxia: Add reset controller power: reset: Add Axxia system reset driver ARM: axxia: Adding defconfig for AXM55xx ...
Diffstat (limited to 'drivers/clk/samsung/clk-exynos3250.c')
-rw-r--r--drivers/clk/samsung/clk-exynos3250.c780
1 files changed, 780 insertions, 0 deletions
diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
new file mode 100644
index 000000000000..7a17bd40d1dd
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -0,0 +1,780 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos3250 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/exynos3250.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_LEFTBUS 0x4200
+#define DIV_LEFTBUS 0x4500
+#define GATE_IP_LEFTBUS 0x4800
+#define SRC_RIGHTBUS 0x8200
+#define DIV_RIGHTBUS 0x8500
+#define GATE_IP_RIGHTBUS 0x8800
+#define GATE_IP_PERIR 0x8960
+#define MPLL_LOCK 0xc010
+#define MPLL_CON0 0xc110
+#define VPLL_LOCK 0xc020
+#define VPLL_CON0 0xc120
+#define UPLL_LOCK 0xc030
+#define UPLL_CON0 0xc130
+#define SRC_TOP0 0xc210
+#define SRC_TOP1 0xc214
+#define SRC_CAM 0xc220
+#define SRC_MFC 0xc228
+#define SRC_G3D 0xc22c
+#define SRC_LCD 0xc234
+#define SRC_ISP 0xc238
+#define SRC_FSYS 0xc240
+#define SRC_PERIL0 0xc250
+#define SRC_PERIL1 0xc254
+#define SRC_MASK_TOP 0xc310
+#define SRC_MASK_CAM 0xc320
+#define SRC_MASK_LCD 0xc334
+#define SRC_MASK_ISP 0xc338
+#define SRC_MASK_FSYS 0xc340
+#define SRC_MASK_PERIL0 0xc350
+#define SRC_MASK_PERIL1 0xc354
+#define DIV_TOP 0xc510
+#define DIV_CAM 0xc520
+#define DIV_MFC 0xc528
+#define DIV_G3D 0xc52c
+#define DIV_LCD 0xc534
+#define DIV_ISP 0xc538
+#define DIV_FSYS0 0xc540
+#define DIV_FSYS1 0xc544
+#define DIV_FSYS2 0xc548
+#define DIV_PERIL0 0xc550
+#define DIV_PERIL1 0xc554
+#define DIV_PERIL3 0xc55c
+#define DIV_PERIL4 0xc560
+#define DIV_PERIL5 0xc564
+#define DIV_CAM1 0xc568
+#define CLKDIV2_RATIO 0xc580
+#define GATE_SCLK_CAM 0xc820
+#define GATE_SCLK_MFC 0xc828
+#define GATE_SCLK_G3D 0xc82c
+#define GATE_SCLK_LCD 0xc834
+#define GATE_SCLK_ISP_TOP 0xc838
+#define GATE_SCLK_FSYS 0xc840
+#define GATE_SCLK_PERIL 0xc850
+#define GATE_IP_CAM 0xc920
+#define GATE_IP_MFC 0xc928
+#define GATE_IP_G3D 0xc92c
+#define GATE_IP_LCD 0xc934
+#define GATE_IP_ISP 0xc938
+#define GATE_IP_FSYS 0xc940
+#define GATE_IP_PERIL 0xc950
+#define GATE_BLOCK 0xc970
+#define APLL_LOCK 0x14000
+#define APLL_CON0 0x14100
+#define SRC_CPU 0x14200
+#define DIV_CPU0 0x14500
+#define DIV_CPU1 0x14504
+
+/* list of PLLs to be registered */
+enum exynos3250_plls {
+ apll, mpll, vpll, upll,
+ nr_plls
+};
+
+static void __iomem *reg_base;
+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos3250_clk_regs;
+
+static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
+ SRC_LEFTBUS,
+ DIV_LEFTBUS,
+ GATE_IP_LEFTBUS,
+ SRC_RIGHTBUS,
+ DIV_RIGHTBUS,
+ GATE_IP_RIGHTBUS,
+ GATE_IP_PERIR,
+ MPLL_LOCK,
+ MPLL_CON0,
+ VPLL_LOCK,
+ VPLL_CON0,
+ UPLL_LOCK,
+ UPLL_CON0,
+ SRC_TOP0,
+ SRC_TOP1,
+ SRC_CAM,
+ SRC_MFC,
+ SRC_G3D,
+ SRC_LCD,
+ SRC_ISP,
+ SRC_FSYS,
+ SRC_PERIL0,
+ SRC_PERIL1,
+ SRC_MASK_TOP,
+ SRC_MASK_CAM,
+ SRC_MASK_LCD,
+ SRC_MASK_ISP,
+ SRC_MASK_FSYS,
+ SRC_MASK_PERIL0,
+ SRC_MASK_PERIL1,
+ DIV_TOP,
+ DIV_CAM,
+ DIV_MFC,
+ DIV_G3D,
+ DIV_LCD,
+ DIV_ISP,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_PERIL0,
+ DIV_PERIL1,
+ DIV_PERIL3,
+ DIV_PERIL4,
+ DIV_PERIL5,
+ DIV_CAM1,
+ CLKDIV2_RATIO,
+ GATE_SCLK_CAM,
+ GATE_SCLK_MFC,
+ GATE_SCLK_G3D,
+ GATE_SCLK_LCD,
+ GATE_SCLK_ISP_TOP,
+ GATE_SCLK_FSYS,
+ GATE_SCLK_PERIL,
+ GATE_IP_CAM,
+ GATE_IP_MFC,
+ GATE_IP_G3D,
+ GATE_IP_LCD,
+ GATE_IP_ISP,
+ GATE_IP_FSYS,
+ GATE_IP_PERIL,
+ GATE_BLOCK,
+ APLL_LOCK,
+ SRC_CPU,
+ DIV_CPU0,
+ DIV_CPU1,
+};
+
+static int exynos3250_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos3250_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+ return 0;
+}
+
+static void exynos3250_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos3250_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+}
+
+static struct syscore_ops exynos3250_clk_syscore_ops = {
+ .suspend = exynos3250_clk_suspend,
+ .resume = exynos3250_clk_resume,
+};
+
+static void exynos3250_clk_sleep_init(void)
+{
+ exynos3250_clk_regs =
+ samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs,
+ ARRAY_SIZE(exynos3250_cmu_clk_regs));
+ if (!exynos3250_clk_regs) {
+ pr_warn("%s: Failed to allocate sleep save data\n", __func__);
+ goto err;
+ }
+
+ register_syscore_ops(&exynos3250_clk_syscore_ops);
+ return;
+err:
+ kfree(exynos3250_clk_regs);
+}
+#else
+static inline void exynos3250_clk_sleep_init(void) { }
+#endif
+
+/* list of all parent clock list */
+PNAME(mout_vpllsrc_p) = { "fin_pll", };
+
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
+PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", };
+PNAME(mout_upll_p) = { "fin_pll", "fout_upll", };
+
+PNAME(mout_mpll_user_p) = { "fin_pll", "div_mpll_pre", };
+PNAME(mout_epll_user_p) = { "fin_pll", "mout_epll", };
+PNAME(mout_core_p) = { "mout_apll", "mout_mpll_user_c", };
+PNAME(mout_hpm_p) = { "mout_apll", "mout_mpll_user_c", };
+
+PNAME(mout_ebi_p) = { "div_aclk_200", "div_aclk_160", };
+PNAME(mout_ebi_1_p) = { "mout_ebi", "mout_vpll", };
+
+PNAME(mout_gdl_p) = { "mout_mpll_user_l", };
+PNAME(mout_gdr_p) = { "mout_mpll_user_r", };
+
+PNAME(mout_aclk_400_mcuisp_sub_p)
+ = { "fin_pll", "div_aclk_400_mcuisp", };
+PNAME(mout_aclk_266_0_p) = { "div_mpll_pre", "mout_vpll", };
+PNAME(mout_aclk_266_1_p) = { "mout_epll_user", };
+PNAME(mout_aclk_266_p) = { "mout_aclk_266_0", "mout_aclk_266_1", };
+PNAME(mout_aclk_266_sub_p) = { "fin_pll", "div_aclk_266", };
+
+PNAME(group_div_mpll_pre_p) = { "div_mpll_pre", };
+PNAME(group_epll_vpll_p) = { "mout_epll_user", "mout_vpll" };
+PNAME(group_sclk_p) = { "xxti", "xusbxti",
+ "none", "none",
+ "none", "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll", };
+PNAME(group_sclk_audio_p) = { "audiocdclk", "none",
+ "none", "none",
+ "xxti", "xusbxti",
+ "div_mpll_pre", "mout_epll_user",
+ "mout_vpll", };
+PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti",
+ "none", "none", "none",
+ "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll",
+ "div_cam_blk_320", };
+PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti",
+ "m_bitclkhsdiv4_2l", "none",
+ "none", "none", "div_mpll_pre",
+ "mout_epll_user", "mout_vpll",
+ "none", "none", "none",
+ "div_lcd_blk_145", };
+
+PNAME(mout_mfc_p) = { "mout_mfc_0", "mout_mfc_1" };
+PNAME(mout_g3d_p) = { "mout_g3d_0", "mout_g3d_1" };
+
+static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = {
+ FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0),
+ FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0),
+ FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0),
+ FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0),
+ FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0),
+
+ /* HACK: fin_pll hardcoded to xusbxti until detection is implemented. */
+ FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0),
+};
+
+static struct samsung_mux_clock mux_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* SRC_LEFTBUS */
+ MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p,
+ SRC_LEFTBUS, 4, 1),
+ MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1),
+
+ /* SRC_RIGHTBUS */
+ MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p,
+ SRC_RIGHTBUS, 4, 1),
+ MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1),
+
+ /* SRC_TOP0 */
+ MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1),
+ MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1),
+ MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1),
+ MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1),
+ MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1),
+ MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1),
+ MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1),
+ MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1),
+ MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1),
+ MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1),
+
+ /* SRC_TOP1 */
+ MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1),
+ MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p,
+ SRC_TOP1, 24, 1),
+ MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1),
+ MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1),
+ MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1),
+ MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+
+ /* SRC_CAM */
+ MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4),
+ MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4),
+
+ /* SRC_MFC */
+ MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+ MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1),
+ MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1),
+
+ /* SRC_G3D */
+ MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1),
+ MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1),
+ MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1),
+
+ /* SRC_LCD */
+ MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4),
+ MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4),
+
+ /* SRC_ISP */
+ MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4),
+ MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4),
+ MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4),
+
+ /* SRC_FSYS */
+ MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
+ MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3),
+ MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
+
+ /* SRC_PERIL0 */
+ MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
+ MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
+
+ /* SRC_PERIL1 */
+ MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4),
+ MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4),
+ MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4),
+
+ /* SRC_CPU */
+ MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p,
+ SRC_CPU, 24, 1),
+ MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1),
+ MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1),
+ MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+};
+
+static struct samsung_div_clock div_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* DIV_LEFTBUS */
+ DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
+ DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4),
+
+ /* DIV_RIGHTBUS */
+ DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
+ DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4),
+
+ /* DIV_TOP */
+ DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2),
+ DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp",
+ "mout_aclk_400_mcuisp", DIV_TOP, 24, 3),
+ DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3),
+ DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3),
+ DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3),
+ DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4),
+ DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3),
+
+ /* DIV_CAM */
+ DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+ DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4),
+
+ /* DIV_MFC */
+ DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4),
+
+ /* DIV_G3D */
+ DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4),
+
+ /* DIV_LCD */
+ DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4),
+ DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4),
+
+ /* DIV_ISP */
+ DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4),
+ DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp",
+ DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4),
+ DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp",
+ DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4),
+
+ /* DIV_FSYS0 */
+ DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4),
+
+ /* DIV_FSYS1 */
+ DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+
+ /* DIV_PERIL0 */
+ DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+ DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+
+ /* DIV_PERIL1 */
+ DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+ DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+
+ /* DIV_PERIL4 */
+ DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8),
+ DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4),
+
+ /* DIV_PERIL5 */
+ DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6),
+
+ /* DIV_CPU0 */
+ DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3),
+ DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
+ DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3),
+ DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3),
+ DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3),
+ DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3),
+
+ /* DIV_CPU1 */
+ DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3),
+ DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3),
+};
+
+static struct samsung_gate_clock gate_clks[] __initdata = {
+ /*
+ * NOTE: Following table is sorted by register address in ascending
+ * order and then bitfield shift in descending order, as it is done
+ * in the User's Manual. When adding new entries, please make sure
+ * that the order is preserved, to avoid merge conflicts and make
+ * further work with defined data easier.
+ */
+
+ /* GATE_IP_LEFTBUS */
+ GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_IP_RIGHTBUS */
+ GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100",
+ GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_IP_PERIR */
+ GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100",
+ GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100",
+ GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100",
+ GATE_IP_PERIR, 17, 0, 0),
+ GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0),
+ GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0),
+ GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0),
+ GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0),
+ GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0,
+ CLK_IGNORE_UNUSED, 0),
+
+ /* GATE_SCLK_CAM */
+ GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk",
+ GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk",
+ GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk",
+ GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk",
+ GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_MFC */
+ GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc",
+ GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_G3D */
+ GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d",
+ GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_LCD */
+ GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0",
+ GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre",
+ GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0",
+ GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_ISP_TOP */
+ GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1",
+ GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
+ GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp",
+ GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp",
+ GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_FSYS */
+ GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0),
+ GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre",
+ GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
+ GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
+ GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
+ GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_SCLK_PERIL */
+ GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s",
+ GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm",
+ GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre",
+ GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
+ GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+ GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+ GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0),
+
+ /* GATE_IP_CAM */
+ GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320",
+ GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320",
+ GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320",
+ GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320",
+ GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320",
+ GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320",
+ GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320",
+ GATE_IP_CAM, 11, 0, 0),
+ GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320",
+ GATE_IP_CAM, 9, 0, 0),
+ GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320",
+ GATE_IP_CAM, 8, 0, 0),
+ GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320",
+ GATE_IP_CAM, 7, 0, 0),
+ GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0),
+ GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320",
+ GATE_IP_CAM, 2, 0, 0),
+ GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0),
+ GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0),
+
+ /* GATE_IP_MFC */
+ GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0),
+ GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0),
+
+ /* GATE_IP_G3D */
+ GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0),
+ GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0),
+
+ /* GATE_IP_LCD */
+ GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0),
+ GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0),
+ GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0),
+ GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0),
+
+ /* GATE_IP_ISP */
+ GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0),
+ GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 3, 0, 0),
+ GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 2, 0, 0),
+ GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub",
+ GATE_IP_ISP, 1, 0, 0),
+
+ /* GATE_IP_FSYS */
+ GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0),
+ GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
+ GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
+ GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
+ GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
+ GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
+ GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
+ GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0),
+
+ /* GATE_IP_PERIL */
+ GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0),
+ GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0),
+ GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0),
+ GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0),
+ GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0),
+ GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0),
+ GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0),
+ GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0),
+ GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0),
+ GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0),
+ GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
+ GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
+ GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+ GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
+ GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
+};
+
+/* APLL & MPLL & BPLL & UPLL */
+static struct samsung_pll_rate_table exynos3250_pll_rates[] = {
+ PLL_35XX_RATE(1200000000, 400, 4, 1),
+ PLL_35XX_RATE(1100000000, 275, 3, 1),
+ PLL_35XX_RATE(1066000000, 533, 6, 1),
+ PLL_35XX_RATE(1000000000, 250, 3, 1),
+ PLL_35XX_RATE( 960000000, 320, 4, 1),
+ PLL_35XX_RATE( 900000000, 300, 4, 1),
+ PLL_35XX_RATE( 850000000, 425, 6, 1),
+ PLL_35XX_RATE( 800000000, 200, 3, 1),
+ PLL_35XX_RATE( 700000000, 175, 3, 1),
+ PLL_35XX_RATE( 667000000, 667, 12, 1),
+ PLL_35XX_RATE( 600000000, 400, 4, 2),
+ PLL_35XX_RATE( 533000000, 533, 6, 2),
+ PLL_35XX_RATE( 520000000, 260, 3, 2),
+ PLL_35XX_RATE( 500000000, 250, 3, 2),
+ PLL_35XX_RATE( 400000000, 200, 3, 2),
+ PLL_35XX_RATE( 200000000, 200, 3, 3),
+ PLL_35XX_RATE( 100000000, 200, 3, 4),
+ { /* sentinel */ }
+};
+
+/* VPLL */
+static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
+ PLL_36XX_RATE(600000000, 100, 2, 1, 0),
+ PLL_36XX_RATE(533000000, 266, 3, 2, 32768),
+ PLL_36XX_RATE(519230987, 173, 2, 2, 5046),
+ PLL_36XX_RATE(500000000, 250, 3, 2, 0),
+ PLL_36XX_RATE(445500000, 148, 2, 2, 32768),
+ PLL_36XX_RATE(445055007, 148, 2, 2, 23047),
+ PLL_36XX_RATE(400000000, 200, 3, 2, 0),
+ PLL_36XX_RATE(371250000, 123, 2, 2, 49152),
+ PLL_36XX_RATE(370878997, 185, 3, 2, 28803),
+ PLL_36XX_RATE(340000000, 170, 3, 2, 0),
+ PLL_36XX_RATE(335000015, 111, 2, 2, 43691),
+ PLL_36XX_RATE(333000000, 111, 2, 2, 0),
+ PLL_36XX_RATE(330000000, 110, 2, 2, 0),
+ PLL_36XX_RATE(320000015, 106, 2, 2, 43691),
+ PLL_36XX_RATE(300000000, 100, 2, 2, 0),
+ PLL_36XX_RATE(275000000, 275, 3, 3, 0),
+ PLL_36XX_RATE(222750000, 148, 2, 3, 32768),
+ PLL_36XX_RATE(222528007, 148, 2, 3, 23069),
+ PLL_36XX_RATE(160000000, 160, 3, 3, 0),
+ PLL_36XX_RATE(148500000, 99, 2, 3, 0),
+ PLL_36XX_RATE(148352005, 98, 2, 3, 59070),
+ PLL_36XX_RATE(108000000, 144, 2, 4, 0),
+ PLL_36XX_RATE( 74250000, 99, 2, 4, 0),
+ PLL_36XX_RATE( 74176002, 98, 3, 4, 59070),
+ PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
+ PLL_36XX_RATE( 54000000, 144, 2, 5, 0),
+ { /* sentinel */ }
+};
+
+static struct samsung_pll_clock exynos3250_plls[nr_plls] __initdata = {
+ [apll] = PLL(pll_35xx, CLK_FOUT_APLL, "fout_apll", "fin_pll",
+ APLL_LOCK, APLL_CON0, NULL),
+ [mpll] = PLL(pll_35xx, CLK_FOUT_MPLL, "fout_mpll", "fin_pll",
+ MPLL_LOCK, MPLL_CON0, NULL),
+ [vpll] = PLL(pll_36xx, CLK_FOUT_VPLL, "fout_vpll", "fin_pll",
+ VPLL_LOCK, VPLL_CON0, NULL),
+ [upll] = PLL(pll_35xx, CLK_FOUT_UPLL, "fout_upll", "fin_pll",
+ UPLL_LOCK, UPLL_CON0, NULL),
+};
+
+static void __init exynos3250_cmu_init(struct device_node *np)
+{
+ struct samsung_clk_provider *ctx;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+
+ ctx = samsung_clk_init(np, reg_base, CLK_NR_CLKS);
+ if (!ctx)
+ panic("%s: unable to allocate context.\n", __func__);
+
+ samsung_clk_register_fixed_factor(ctx, fixed_factor_clks,
+ ARRAY_SIZE(fixed_factor_clks));
+
+ exynos3250_plls[apll].rate_table = exynos3250_pll_rates;
+ exynos3250_plls[mpll].rate_table = exynos3250_pll_rates;
+ exynos3250_plls[vpll].rate_table = exynos3250_vpll_rates;
+ exynos3250_plls[upll].rate_table = exynos3250_pll_rates;
+
+ samsung_clk_register_pll(ctx, exynos3250_plls,
+ ARRAY_SIZE(exynos3250_plls), reg_base);
+
+ samsung_clk_register_mux(ctx, mux_clks, ARRAY_SIZE(mux_clks));
+ samsung_clk_register_div(ctx, div_clks, ARRAY_SIZE(div_clks));
+ samsung_clk_register_gate(ctx, gate_clks, ARRAY_SIZE(gate_clks));
+
+ exynos3250_clk_sleep_init();
+}
+CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init);