diff options
author | Jerome Brunet <jbrunet@baylibre.com> | 2018-02-12 17:58:42 +0300 |
---|---|---|
committer | Neil Armstrong <narmstrong@baylibre.com> | 2018-03-13 12:04:03 +0300 |
commit | 722825dcd54b2e427c1aee54a7992eb4ab04a49d (patch) | |
tree | 5abe9c46643a0681d86e24f214816a8ffb911fa3 /drivers/clk/meson | |
parent | 88a4e1283681e0f07048b2bd867cc81fbbae57cc (diff) | |
download | linux-722825dcd54b2e427c1aee54a7992eb4ab04a49d.tar.xz |
clk: meson: migrate plls clocks to clk_regmap
Rework meson pll driver to use clk_regmap and move meson8b, gxbb and
axg's clock using meson_clk_pll to clk_regmap.
This rework is not just about clk_regmap, there a serious clean-up of
the driver code:
* Add lock and reset field: Previously inferred from the n field.
* Simplify the reset logic: Code seemed to apply reset differently but
in fact it was always the same -> assert reset, apply params,
de-assert reset. The 2 lock checking loops have been kept for now, as
they seem to be necessary.
* Do the sequence of init register pokes only at .init() instead of in
.set_rate(). Redoing the init on every set_rate() is not necessary
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Diffstat (limited to 'drivers/clk/meson')
-rw-r--r-- | drivers/clk/meson/axg.c | 213 | ||||
-rw-r--r-- | drivers/clk/meson/clk-pll.c | 243 | ||||
-rw-r--r-- | drivers/clk/meson/clkc.h | 36 | ||||
-rw-r--r-- | drivers/clk/meson/gxbb.c | 424 | ||||
-rw-r--r-- | drivers/clk/meson/meson8b.c | 149 |
5 files changed, 535 insertions, 530 deletions
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index 85f9466ce006..8c27ceffda4a 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -22,28 +22,39 @@ static DEFINE_SPINLOCK(meson_clk_lock); -static struct meson_clk_pll axg_fixed_pll = { - .m = { - .reg_off = HHI_MPLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_MPLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_MPLL_CNTL, - .shift = 16, - .width = 2, - }, - .frac = { - .reg_off = HHI_MPLL_CNTL2, - .shift = 0, - .width = 12, - }, - .lock = &meson_clk_lock, +static struct clk_regmap axg_fixed_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_MPLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_MPLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_MPLL_CNTL, + .shift = 16, + .width = 2, + }, + .frac = { + .reg_off = HHI_MPLL_CNTL2, + .shift = 0, + .width = 12, + }, + .l = { + .reg_off = HHI_MPLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_MPLL_CNTL, + .shift = 29, + .width = 1, + }, + }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll", .ops = &meson_clk_pll_ro_ops, @@ -52,23 +63,34 @@ static struct meson_clk_pll axg_fixed_pll = { }, }; -static struct meson_clk_pll axg_sys_pll = { - .m = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 16, - .width = 2, +static struct clk_regmap axg_sys_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 16, + .width = 2, + }, + .l = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 29, + .width = 1, + }, }, - .lock = &meson_clk_lock, .hw.init = &(struct clk_init_data){ .name = "sys_pll", .ops = &meson_clk_pll_ro_ops, @@ -169,40 +191,47 @@ static const struct pll_rate_table axg_gp0_pll_rate_table[] = { { /* sentinel */ }, }; -static struct pll_params_table axg_gp0_params_table[] = { - PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250), - PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000), - PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be), - PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288), - PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d), - PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000), +const struct reg_sequence axg_gp0_init_regs[] = { + { .reg = HHI_GP0_PLL_CNTL, .def = 0x40010250 }, + { .reg = HHI_GP0_PLL_CNTL1, .def = 0xc084a000 }, + { .reg = HHI_GP0_PLL_CNTL2, .def = 0xb75020be }, + { .reg = HHI_GP0_PLL_CNTL3, .def = 0x0a59a288 }, + { .reg = HHI_GP0_PLL_CNTL4, .def = 0xc000004d }, + { .reg = HHI_GP0_PLL_CNTL5, .def = 0x00078000 }, }; -static struct meson_clk_pll axg_gp0_pll = { - .m = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 16, - .width = 2, - }, - .params = { - .params_table = axg_gp0_params_table, - .params_count = ARRAY_SIZE(axg_gp0_params_table), - .no_init_reset = true, - .reset_lock_loop = true, - }, - .rate_table = axg_gp0_pll_rate_table, - .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table), - .lock = &meson_clk_lock, +static struct clk_regmap axg_gp0_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 16, + .width = 2, + }, + .l = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 29, + .width = 1, + }, + .table = axg_gp0_pll_rate_table, + .init_regs = axg_gp0_init_regs, + .init_count = ARRAY_SIZE(axg_gp0_init_regs), + .flags = CLK_MESON_PLL_LOCK_LOOP_RST, + }, .hw.init = &(struct clk_init_data){ .name = "gp0_pll", .ops = &meson_clk_pll_ops, @@ -698,14 +727,7 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = { .num = NR_CLKS, }; -/* Convenience tables to populate base addresses in .probe */ - -static struct meson_clk_pll *const axg_clk_plls[] = { - &axg_fixed_pll, - &axg_sys_pll, - &axg_gp0_pll, -}; - +/* Convenience table to populate regmap in .probe */ static struct clk_regmap *const axg_clk_regmaps[] = { &axg_clk81, &axg_ddr, @@ -764,22 +786,13 @@ static struct clk_regmap *const axg_clk_regmaps[] = { &axg_mpll1, &axg_mpll2, &axg_mpll3, -}; - -struct clkc_data { - struct meson_clk_pll *const *clk_plls; - unsigned int clk_plls_count; - struct clk_hw_onecell_data *hw_onecell_data; -}; - -static const struct clkc_data axg_clkc_data = { - .clk_plls = axg_clk_plls, - .clk_plls_count = ARRAY_SIZE(axg_clk_plls), - .hw_onecell_data = &axg_hw_onecell_data, + &axg_fixed_pll, + &axg_sys_pll, + &axg_gp0_pll, }; static const struct of_device_id clkc_match_table[] = { - { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data }, + { .compatible = "amlogic,axg-clkc" }, {} }; @@ -792,16 +805,11 @@ static const struct regmap_config clkc_regmap_config = { static int axg_clkc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - const struct clkc_data *clkc_data; struct resource *res; void __iomem *clk_base; struct regmap *map; int ret, i; - clkc_data = of_device_get_match_data(dev); - if (!clkc_data) - return -EINVAL; - /* Generic clocks and PLLs */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -817,21 +825,16 @@ static int axg_clkc_probe(struct platform_device *pdev) if (IS_ERR(map)) return PTR_ERR(map); - /* Populate base address for PLLs */ - for (i = 0; i < clkc_data->clk_plls_count; i++) - clkc_data->clk_plls[i]->base = clk_base; - /* Populate regmap for the regmap backed clocks */ for (i = 0; i < ARRAY_SIZE(axg_clk_regmaps); i++) axg_clk_regmaps[i]->map = map; - for (i = 0; i < clkc_data->hw_onecell_data->num; i++) { + for (i = 0; i < axg_hw_onecell_data.num; i++) { /* array might be sparse */ - if (!clkc_data->hw_onecell_data->hws[i]) + if (!axg_hw_onecell_data.hws[i]) continue; - ret = devm_clk_hw_register(dev, - clkc_data->hw_onecell_data->hws[i]); + ret = devm_clk_hw_register(dev, axg_hw_onecell_data.hws[i]); if (ret) { dev_err(dev, "Clock registration failed\n"); return ret; @@ -839,7 +842,7 @@ static int axg_clkc_probe(struct platform_device *pdev) } return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, - clkc_data->hw_onecell_data); + &axg_hw_onecell_data); } static struct platform_driver axg_driver = { diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c index 218c769c6d50..f3d909719111 100644 --- a/drivers/clk/meson/clk-pll.c +++ b/drivers/clk/meson/clk-pll.c @@ -42,52 +42,36 @@ #include "clkc.h" -#define MESON_PLL_RESET BIT(29) -#define MESON_PLL_LOCK BIT(31) - -#define to_meson_clk_pll(_hw) container_of(_hw, struct meson_clk_pll, hw) +static inline struct meson_clk_pll_data * +meson_clk_pll_data(struct clk_regmap *clk) +{ + return (struct meson_clk_pll_data *)clk->data; +} static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { - struct meson_clk_pll *pll = to_meson_clk_pll(hw); - struct parm *p; + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); u64 rate; u16 n, m, frac = 0, od, od2 = 0, od3 = 0; - u32 reg; - - p = &pll->n; - reg = readl(pll->base + p->reg_off); - n = PARM_GET(p->width, p->shift, reg); - p = &pll->m; - reg = readl(pll->base + p->reg_off); - m = PARM_GET(p->width, p->shift, reg); + n = meson_parm_read(clk->map, &pll->n); + m = meson_parm_read(clk->map, &pll->m); + od = meson_parm_read(clk->map, &pll->od); - p = &pll->od; - reg = readl(pll->base + p->reg_off); - od = PARM_GET(p->width, p->shift, reg); + if (MESON_PARM_APPLICABLE(&pll->od2)) + od2 = meson_parm_read(clk->map, &pll->od2); - p = &pll->od2; - if (p->width) { - reg = readl(pll->base + p->reg_off); - od2 = PARM_GET(p->width, p->shift, reg); - } - - p = &pll->od3; - if (p->width) { - reg = readl(pll->base + p->reg_off); - od3 = PARM_GET(p->width, p->shift, reg); - } + if (MESON_PARM_APPLICABLE(&pll->od3)) + od3 = meson_parm_read(clk->map, &pll->od3); rate = (u64)m * parent_rate; - p = &pll->frac; - if (p->width) { - reg = readl(pll->base + p->reg_off); - frac = PARM_GET(p->width, p->shift, reg); + if (MESON_PARM_APPLICABLE(&pll->frac)) { + frac = meson_parm_read(clk->map, &pll->frac); - rate += mul_u64_u32_shr(parent_rate, frac, p->width); + rate += mul_u64_u32_shr(parent_rate, frac, pll->frac.width); } return div_u64(rate, n) >> od >> od2 >> od3; @@ -96,177 +80,136 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw, static long meson_clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { - struct meson_clk_pll *pll = to_meson_clk_pll(hw); - const struct pll_rate_table *rate_table = pll->rate_table; - int i; + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); + const struct pll_rate_table *pllt; /* * if the table is missing, just return the current rate * since we don't have the other available frequencies */ - if (!rate_table) + if (!pll->table) return meson_clk_pll_recalc_rate(hw, *parent_rate); - for (i = 0; i < pll->rate_count; i++) { - if (rate <= rate_table[i].rate) - return rate_table[i].rate; + for (pllt = pll->table; pllt->rate; pllt++) { + if (rate <= pllt->rate) + return pllt->rate; } /* else return the smallest value */ - return rate_table[0].rate; + return pll->table[0].rate; } -static const struct pll_rate_table *meson_clk_get_pll_settings(struct meson_clk_pll *pll, - unsigned long rate) +static const struct pll_rate_table * +meson_clk_get_pll_settings(const struct pll_rate_table *table, + unsigned long rate) { - const struct pll_rate_table *rate_table = pll->rate_table; - int i; + const struct pll_rate_table *pllt; - if (!rate_table) + if (!table) return NULL; - for (i = 0; i < pll->rate_count; i++) { - if (rate == rate_table[i].rate) - return &rate_table[i]; + for (pllt = table; pllt->rate; pllt++) { + if (rate == pllt->rate) + return pllt; } + return NULL; } -/* Specific wait loop for GXL/GXM GP0 PLL */ -static int meson_clk_pll_wait_lock_reset(struct meson_clk_pll *pll, - struct parm *p_n) +static int meson_clk_pll_wait_lock(struct clk_hw *hw) { - int delay = 100; - u32 reg; - - while (delay > 0) { - reg = readl(pll->base + p_n->reg_off); - writel(reg | MESON_PLL_RESET, pll->base + p_n->reg_off); - udelay(10); - writel(reg & ~MESON_PLL_RESET, pll->base + p_n->reg_off); - - /* This delay comes from AMLogic tree clk-gp0-gxl driver */ - mdelay(1); - - reg = readl(pll->base + p_n->reg_off); - if (reg & MESON_PLL_LOCK) + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); + int delay = pll->flags & CLK_MESON_PLL_LOCK_LOOP_RST ? + 100 : 24000000; + + do { + /* Specific wait loop for GXL/GXM GP0 PLL */ + if (pll->flags & CLK_MESON_PLL_LOCK_LOOP_RST) { + /* Procedure taken from the vendor kernel */ + meson_parm_write(clk->map, &pll->rst, 1); + udelay(10); + meson_parm_write(clk->map, &pll->rst, 0); + mdelay(1); + } + + /* Is the clock locked now ? */ + if (meson_parm_read(clk->map, &pll->l)) return 0; - delay--; - } - return -ETIMEDOUT; -} -static int meson_clk_pll_wait_lock(struct meson_clk_pll *pll, - struct parm *p_n) -{ - int delay = 24000000; - u32 reg; - - while (delay > 0) { - reg = readl(pll->base + p_n->reg_off); - - if (reg & MESON_PLL_LOCK) - return 0; delay--; - } + } while (delay > 0); + return -ETIMEDOUT; } -static void meson_clk_pll_init_params(struct meson_clk_pll *pll) +static void meson_clk_pll_init(struct clk_hw *hw) { - int i; - - for (i = 0 ; i < pll->params.params_count ; ++i) - writel(pll->params.params_table[i].value, - pll->base + pll->params.params_table[i].reg_off); + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); + + if (pll->init_count) { + meson_parm_write(clk->map, &pll->rst, 1); + regmap_multi_reg_write(clk->map, pll->init_regs, + pll->init_count); + meson_parm_write(clk->map, &pll->rst, 0); + } } static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { - struct meson_clk_pll *pll = to_meson_clk_pll(hw); - struct parm *p; - const struct pll_rate_table *rate_set; + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_pll_data *pll = meson_clk_pll_data(clk); + const struct pll_rate_table *pllt; unsigned long old_rate; - int ret = 0; - u32 reg; if (parent_rate == 0 || rate == 0) return -EINVAL; old_rate = rate; - rate_set = meson_clk_get_pll_settings(pll, rate); - if (!rate_set) + pllt = meson_clk_get_pll_settings(pll->table, rate); + if (!pllt) return -EINVAL; - /* Initialize the PLL in a clean state if specified */ - if (pll->params.params_count) - meson_clk_pll_init_params(pll); - - /* PLL reset */ - p = &pll->n; - reg = readl(pll->base + p->reg_off); - /* If no_init_reset is provided, avoid resetting at this point */ - if (!pll->params.no_init_reset) - writel(reg | MESON_PLL_RESET, pll->base + p->reg_off); - - reg = PARM_SET(p->width, p->shift, reg, rate_set->n); - writel(reg, pll->base + p->reg_off); - - p = &pll->m; - reg = readl(pll->base + p->reg_off); - reg = PARM_SET(p->width, p->shift, reg, rate_set->m); - writel(reg, pll->base + p->reg_off); - - p = &pll->od; - reg = readl(pll->base + p->reg_off); - reg = PARM_SET(p->width, p->shift, reg, rate_set->od); - writel(reg, pll->base + p->reg_off); - - p = &pll->od2; - if (p->width) { - reg = readl(pll->base + p->reg_off); - reg = PARM_SET(p->width, p->shift, reg, rate_set->od2); - writel(reg, pll->base + p->reg_off); - } + /* Put the pll in reset to write the params */ + meson_parm_write(clk->map, &pll->rst, 1); - p = &pll->od3; - if (p->width) { - reg = readl(pll->base + p->reg_off); - reg = PARM_SET(p->width, p->shift, reg, rate_set->od3); - writel(reg, pll->base + p->reg_off); - } + meson_parm_write(clk->map, &pll->n, pllt->n); + meson_parm_write(clk->map, &pll->m, pllt->m); + meson_parm_write(clk->map, &pll->od, pllt->od); - p = &pll->frac; - if (p->width) { - reg = readl(pll->base + p->reg_off); - reg = PARM_SET(p->width, p->shift, reg, rate_set->frac); - writel(reg, pll->base + p->reg_off); - } + if (MESON_PARM_APPLICABLE(&pll->od2)) + meson_parm_write(clk->map, &pll->od2, pllt->od2); - p = &pll->n; - /* If clear_reset_for_lock is provided, remove the reset bit here */ - if (pll->params.clear_reset_for_lock) { - reg = readl(pll->base + p->reg_off); - writel(reg & ~MESON_PLL_RESET, pll->base + p->reg_off); - } + if (MESON_PARM_APPLICABLE(&pll->od3)) + meson_parm_write(clk->map, &pll->od3, pllt->od3); + + if (MESON_PARM_APPLICABLE(&pll->frac)) + meson_parm_write(clk->map, &pll->frac, pllt->frac); + + /* make sure the reset is cleared at this point */ + meson_parm_write(clk->map, &pll->rst, 0); - /* If reset_lock_loop, use a special loop including resetting */ - if (pll->params.reset_lock_loop) - ret = meson_clk_pll_wait_lock_reset(pll, p); - else - ret = meson_clk_pll_wait_lock(pll, p); - if (ret) { + if (meson_clk_pll_wait_lock(hw)) { pr_warn("%s: pll did not lock, trying to restore old rate %lu\n", __func__, old_rate); + /* + * FIXME: Do we really need/want this HACK ? + * It looks unsafe. what happens if the clock gets into a + * broken state and we can't lock back on the old_rate ? Looks + * like an infinite recursion is possible + */ meson_clk_pll_set_rate(hw, old_rate, parent_rate); } - return ret; + return 0; } const struct clk_ops meson_clk_pll_ops = { + .init = meson_clk_pll_init, .recalc_rate = meson_clk_pll_recalc_rate, .round_rate = meson_clk_pll_round_rate, .set_rate = meson_clk_pll_set_rate, diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h index a4a526cbca4c..f0d70eaffcf3 100644 --- a/drivers/clk/meson/clkc.h +++ b/drivers/clk/meson/clkc.h @@ -82,41 +82,21 @@ struct pll_rate_table { .frac = (_frac), \ } \ -struct pll_params_table { - unsigned int reg_off; - unsigned int value; -}; - -#define PLL_PARAM(_reg, _val) \ - { \ - .reg_off = (_reg), \ - .value = (_val), \ - } - -struct pll_setup_params { - struct pll_params_table *params_table; - unsigned int params_count; - /* Workaround for GP0, do not reset before configuring */ - bool no_init_reset; - /* Workaround for GP0, unreset right before checking for lock */ - bool clear_reset_for_lock; - /* Workaround for GXL GP0, reset in the lock checking loop */ - bool reset_lock_loop; -}; +#define CLK_MESON_PLL_LOCK_LOOP_RST BIT(0) -struct meson_clk_pll { - struct clk_hw hw; - void __iomem *base; +struct meson_clk_pll_data { struct parm m; struct parm n; struct parm frac; struct parm od; struct parm od2; struct parm od3; - const struct pll_setup_params params; - const struct pll_rate_table *rate_table; - unsigned int rate_count; - spinlock_t *lock; + struct parm l; + struct parm rst; + const struct reg_sequence *init_regs; + unsigned int init_count; + const struct pll_rate_table *table; + u8 flags; }; #define to_meson_clk_pll(_hw) container_of(_hw, struct meson_clk_pll, hw) diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 196557f11608..49f5716ce8b6 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -188,28 +188,39 @@ static const struct pll_rate_table gxl_gp0_pll_rate_table[] = { { /* sentinel */ }, }; -static struct meson_clk_pll gxbb_fixed_pll = { - .m = { - .reg_off = HHI_MPLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_MPLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_MPLL_CNTL, - .shift = 16, - .width = 2, - }, - .frac = { - .reg_off = HHI_MPLL_CNTL2, - .shift = 0, - .width = 12, - }, - .lock = &meson_clk_lock, +static struct clk_regmap gxbb_fixed_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_MPLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_MPLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_MPLL_CNTL, + .shift = 16, + .width = 2, + }, + .frac = { + .reg_off = HHI_MPLL_CNTL2, + .shift = 0, + .width = 12, + }, + .l = { + .reg_off = HHI_MPLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_MPLL_CNTL, + .shift = 29, + .width = 1, + }, + }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll", .ops = &meson_clk_pll_ro_ops, @@ -230,38 +241,49 @@ static struct clk_fixed_factor gxbb_hdmi_pll_pre_mult = { }, }; -static struct meson_clk_pll gxbb_hdmi_pll = { - .m = { - .reg_off = HHI_HDMI_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_HDMI_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .frac = { - .reg_off = HHI_HDMI_PLL_CNTL2, - .shift = 0, - .width = 12, - }, - .od = { - .reg_off = HHI_HDMI_PLL_CNTL2, - .shift = 16, - .width = 2, - }, - .od2 = { - .reg_off = HHI_HDMI_PLL_CNTL2, - .shift = 22, - .width = 2, - }, - .od3 = { - .reg_off = HHI_HDMI_PLL_CNTL2, - .shift = 18, - .width = 2, +static struct clk_regmap gxbb_hdmi_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .frac = { + .reg_off = HHI_HDMI_PLL_CNTL2, + .shift = 0, + .width = 12, + }, + .od = { + .reg_off = HHI_HDMI_PLL_CNTL2, + .shift = 16, + .width = 2, + }, + .od2 = { + .reg_off = HHI_HDMI_PLL_CNTL2, + .shift = 22, + .width = 2, + }, + .od3 = { + .reg_off = HHI_HDMI_PLL_CNTL2, + .shift = 18, + .width = 2, + }, + .l = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 28, + .width = 1, + }, }, - .lock = &meson_clk_lock, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll", .ops = &meson_clk_pll_ro_ops, @@ -271,43 +293,55 @@ static struct meson_clk_pll gxbb_hdmi_pll = { }, }; -static struct meson_clk_pll gxl_hdmi_pll = { - .m = { - .reg_off = HHI_HDMI_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_HDMI_PLL_CNTL, - .shift = 9, - .width = 5, +static struct clk_regmap gxl_hdmi_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .frac = { + /* + * On gxl, there is a register shift due to + * HHI_HDMI_PLL_CNTL1 which does not exist on gxbb, + * so we compute the register offset based on the PLL + * base to get it right + */ + .reg_off = HHI_HDMI_PLL_CNTL + 4, + .shift = 0, + .width = 12, + }, + .od = { + .reg_off = HHI_HDMI_PLL_CNTL + 8, + .shift = 21, + .width = 2, + }, + .od2 = { + .reg_off = HHI_HDMI_PLL_CNTL + 8, + .shift = 23, + .width = 2, + }, + .od3 = { + .reg_off = HHI_HDMI_PLL_CNTL + 8, + .shift = 19, + .width = 2, + }, + .l = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_HDMI_PLL_CNTL, + .shift = 29, + .width = 1, + }, }, - .frac = { - /* - * On gxl, there is a register shift due to HHI_HDMI_PLL_CNTL1 - * which does not exist on gxbb, so we compute the register - * offset based on the PLL base to get it right - */ - .reg_off = HHI_HDMI_PLL_CNTL + 4, - .shift = 0, - .width = 12, - }, - .od = { - .reg_off = HHI_HDMI_PLL_CNTL + 8, - .shift = 21, - .width = 2, - }, - .od2 = { - .reg_off = HHI_HDMI_PLL_CNTL + 8, - .shift = 23, - .width = 2, - }, - .od3 = { - .reg_off = HHI_HDMI_PLL_CNTL + 8, - .shift = 19, - .width = 2, - }, - .lock = &meson_clk_lock, .hw.init = &(struct clk_init_data){ .name = "hdmi_pll", .ops = &meson_clk_pll_ro_ops, @@ -317,23 +351,34 @@ static struct meson_clk_pll gxl_hdmi_pll = { }, }; -static struct meson_clk_pll gxbb_sys_pll = { - .m = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 10, - .width = 2, +static struct clk_regmap gxbb_sys_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 10, + .width = 2, + }, + .l = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 29, + .width = 1, + }, }, - .lock = &meson_clk_lock, .hw.init = &(struct clk_init_data){ .name = "sys_pll", .ops = &meson_clk_pll_ro_ops, @@ -343,38 +388,44 @@ static struct meson_clk_pll gxbb_sys_pll = { }, }; -struct pll_params_table gxbb_gp0_params_table[] = { - PLL_PARAM(HHI_GP0_PLL_CNTL, 0x6a000228), - PLL_PARAM(HHI_GP0_PLL_CNTL2, 0x69c80000), - PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a5590c4), - PLL_PARAM(HHI_GP0_PLL_CNTL4, 0x0000500d), +const struct reg_sequence gxbb_gp0_init_regs[] = { + { .reg = HHI_GP0_PLL_CNTL, .def = 0x6a000228 }, + { .reg = HHI_GP0_PLL_CNTL2, .def = 0x69c80000 }, + { .reg = HHI_GP0_PLL_CNTL3, .def = 0x0a5590c4 }, + { .reg = HHI_GP0_PLL_CNTL4, .def = 0x0000500d }, }; -static struct meson_clk_pll gxbb_gp0_pll = { - .m = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 16, - .width = 2, - }, - .params = { - .params_table = gxbb_gp0_params_table, - .params_count = ARRAY_SIZE(gxbb_gp0_params_table), - .no_init_reset = true, - .clear_reset_for_lock = true, +static struct clk_regmap gxbb_gp0_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 16, + .width = 2, + }, + .l = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 29, + .width = 1, + }, + .table = gxbb_gp0_pll_rate_table, + .init_regs = gxbb_gp0_init_regs, + .init_count = ARRAY_SIZE(gxbb_gp0_init_regs), }, - .rate_table = gxbb_gp0_pll_rate_table, - .rate_count = ARRAY_SIZE(gxbb_gp0_pll_rate_table), - .lock = &meson_clk_lock, .hw.init = &(struct clk_init_data){ .name = "gp0_pll", .ops = &meson_clk_pll_ops, @@ -384,40 +435,47 @@ static struct meson_clk_pll gxbb_gp0_pll = { }, }; -struct pll_params_table gxl_gp0_params_table[] = { - PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250), - PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000), - PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be), - PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288), - PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d), - PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000), +const struct reg_sequence gxl_gp0_init_regs[] = { + { .reg = HHI_GP0_PLL_CNTL, .def = 0x40010250 }, + { .reg = HHI_GP0_PLL_CNTL1, .def = 0xc084a000 }, + { .reg = HHI_GP0_PLL_CNTL2, .def = 0xb75020be }, + { .reg = HHI_GP0_PLL_CNTL3, .def = 0x0a59a288 }, + { .reg = HHI_GP0_PLL_CNTL4, .def = 0xc000004d }, + { .reg = HHI_GP0_PLL_CNTL5, .def = 0x00078000 }, }; -static struct meson_clk_pll gxl_gp0_pll = { - .m = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_GP0_PLL_CNTL, - .shift = 16, - .width = 2, - }, - .params = { - .params_table = gxl_gp0_params_table, - .params_count = ARRAY_SIZE(gxl_gp0_params_table), - .no_init_reset = true, - .reset_lock_loop = true, +static struct clk_regmap gxl_gp0_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 16, + .width = 2, + }, + .l = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_GP0_PLL_CNTL, + .shift = 29, + .width = 1, + }, + .table = gxl_gp0_pll_rate_table, + .init_regs = gxl_gp0_init_regs, + .init_count = ARRAY_SIZE(gxl_gp0_init_regs), + .flags = CLK_MESON_PLL_LOCK_LOOP_RST, }, - .rate_table = gxl_gp0_pll_rate_table, - .rate_count = ARRAY_SIZE(gxl_gp0_pll_rate_table), - .lock = &meson_clk_lock, .hw.init = &(struct clk_init_data){ .name = "gp0_pll", .ops = &meson_clk_pll_ops, @@ -1762,20 +1820,14 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = { .num = NR_CLKS, }; -/* Convenience tables to populate base addresses in .probe */ - -static struct meson_clk_pll *const gxbb_clk_plls[] = { - &gxbb_fixed_pll, - &gxbb_hdmi_pll, - &gxbb_sys_pll, +static struct clk_regmap *const gxbb_clk_regmaps[] = { &gxbb_gp0_pll, + &gxbb_hdmi_pll, }; -static struct meson_clk_pll *const gxl_clk_plls[] = { - &gxbb_fixed_pll, - &gxl_hdmi_pll, - &gxbb_sys_pll, +static struct clk_regmap *const gxl_clk_regmaps[] = { &gxl_gp0_pll, + &gxl_hdmi_pll, }; static struct clk_regmap *const gx_clk_regmaps[] = { @@ -1910,23 +1962,25 @@ static struct clk_regmap *const gx_clk_regmaps[] = { &gxbb_mpll1, &gxbb_mpll2, &gxbb_cts_amclk_div, + &gxbb_fixed_pll, + &gxbb_sys_pll, }; struct clkc_data { - struct meson_clk_pll *const *clk_plls; - unsigned int clk_plls_count; + struct clk_regmap *const *regmap_clks; + unsigned int regmap_clks_count; struct clk_hw_onecell_data *hw_onecell_data; }; static const struct clkc_data gxbb_clkc_data = { - .clk_plls = gxbb_clk_plls, - .clk_plls_count = ARRAY_SIZE(gxbb_clk_plls), + .regmap_clks = gxbb_clk_regmaps, + .regmap_clks_count = ARRAY_SIZE(gxbb_clk_regmaps), .hw_onecell_data = &gxbb_hw_onecell_data, }; static const struct clkc_data gxl_clkc_data = { - .clk_plls = gxl_clk_plls, - .clk_plls_count = ARRAY_SIZE(gxl_clk_plls), + .regmap_clks = gxl_clk_regmaps, + .regmap_clks_count = ARRAY_SIZE(gxl_clk_regmaps), .hw_onecell_data = &gxl_hw_onecell_data, }; @@ -1969,14 +2023,14 @@ static int gxbb_clkc_probe(struct platform_device *pdev) if (IS_ERR(map)) return PTR_ERR(map); - /* Populate base address for PLLs */ - for (i = 0; i < clkc_data->clk_plls_count; i++) - clkc_data->clk_plls[i]->base = clk_base; - /* Populate regmap for the common regmap backed clocks */ for (i = 0; i < ARRAY_SIZE(gx_clk_regmaps); i++) gx_clk_regmaps[i]->map = map; + /* Populate regmap for soc specific clocks */ + for (i = 0; i < clkc_data->regmap_clks_count; i++) + clkc_data->regmap_clks[i]->map = map; + /* Register all clks */ for (i = 0; i < clkc_data->hw_onecell_data->num; i++) { /* array might be sparse */ diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c index 4bb51c8f3102..4fd8253c54bb 100644 --- a/drivers/clk/meson/meson8b.c +++ b/drivers/clk/meson/meson8b.c @@ -122,23 +122,34 @@ static struct clk_fixed_rate meson8b_xtal = { }, }; -static struct meson_clk_pll meson8b_fixed_pll = { - .m = { - .reg_off = HHI_MPLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_MPLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_MPLL_CNTL, - .shift = 16, - .width = 2, - }, - .lock = &meson_clk_lock, +static struct clk_regmap meson8b_fixed_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_MPLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_MPLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_MPLL_CNTL, + .shift = 16, + .width = 2, + }, + .l = { + .reg_off = HHI_MPLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_MPLL_CNTL, + .shift = 29, + .width = 1, + }, + }, .hw.init = &(struct clk_init_data){ .name = "fixed_pll", .ops = &meson_clk_pll_ro_ops, @@ -148,23 +159,34 @@ static struct meson_clk_pll meson8b_fixed_pll = { }, }; -static struct meson_clk_pll meson8b_vid_pll = { - .m = { - .reg_off = HHI_VID_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_VID_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_VID_PLL_CNTL, - .shift = 16, - .width = 2, +static struct clk_regmap meson8b_vid_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_VID_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_VID_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_VID_PLL_CNTL, + .shift = 16, + .width = 2, + }, + .l = { + .reg_off = HHI_VID_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_VID_PLL_CNTL, + .shift = 29, + .width = 1, + }, }, - .lock = &meson_clk_lock, .hw.init = &(struct clk_init_data){ .name = "vid_pll", .ops = &meson_clk_pll_ro_ops, @@ -174,25 +196,35 @@ static struct meson_clk_pll meson8b_vid_pll = { }, }; -static struct meson_clk_pll meson8b_sys_pll = { - .m = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 0, - .width = 9, - }, - .n = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 9, - .width = 5, - }, - .od = { - .reg_off = HHI_SYS_PLL_CNTL, - .shift = 16, - .width = 2, - }, - .rate_table = sys_pll_rate_table, - .rate_count = ARRAY_SIZE(sys_pll_rate_table), - .lock = &meson_clk_lock, +static struct clk_regmap meson8b_sys_pll = { + .data = &(struct meson_clk_pll_data){ + .m = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 0, + .width = 9, + }, + .n = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 9, + .width = 5, + }, + .od = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 16, + .width = 2, + }, + .l = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 31, + .width = 1, + }, + .rst = { + .reg_off = HHI_SYS_PLL_CNTL, + .shift = 29, + .width = 1, + }, + .table = sys_pll_rate_table, + }, .hw.init = &(struct clk_init_data){ .name = "sys_pll", .ops = &meson_clk_pll_ops, @@ -613,12 +645,6 @@ static struct clk_hw_onecell_data meson8b_hw_onecell_data = { .num = CLK_NR_CLKS, }; -static struct meson_clk_pll *const meson8b_clk_plls[] = { - &meson8b_fixed_pll, - &meson8b_vid_pll, - &meson8b_sys_pll, -}; - static struct clk_regmap *const meson8b_clk_regmaps[] = { &meson8b_clk81, &meson8b_ddr, @@ -703,6 +729,9 @@ static struct clk_regmap *const meson8b_clk_regmaps[] = { &meson8b_mpll0, &meson8b_mpll1, &meson8b_mpll2, + &meson8b_fixed_pll, + &meson8b_vid_pll, + &meson8b_sys_pll, }; static const struct meson8b_clk_reset_line { @@ -825,10 +854,6 @@ static int meson8b_clkc_probe(struct platform_device *pdev) if (IS_ERR(map)) return PTR_ERR(map); - /* Populate base address for PLLs */ - for (i = 0; i < ARRAY_SIZE(meson8b_clk_plls); i++) - meson8b_clk_plls[i]->base = clk_base; - /* Populate the base address for CPU clk */ meson8b_cpu_clk.base = clk_base; |