Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 463 insertions, 0 deletions

diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
new file mode 100644
index 000000000000..cf056a990f18
--- /dev/null
+++ b/drivers/char/rio/cirrus.h
@@ -0,0 +1,463 @@
+/****************************************************************************
+ *******                                                              *******
+ *******		CIRRUS.H				      *******
+ *******                                                              *******
+ ****************************************************************************
+
+ Author  : Jeremy Rolls
+ Date    : 3 Aug 1990
+
+ *
+ *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ Version : 0.01
+
+
+                            Mods
+ ----------------------------------------------------------------------------
+  Date     By                Description
+ ----------------------------------------------------------------------------
+
+ ***************************************************************************/
+
+#ifndef _cirrus_h
+#ifndef lint
+/* static char* _cirrus_h_sccs = "@(#)cirrus.h	1.16"; */
+#endif
+#define _cirrus_h 1
+
+#ifdef RTA
+#define	TO_UART	RX
+#define TO_DRIVER TX
+#endif
+
+#ifdef HOST
+#define	TO_UART	TX
+#define TO_DRIVER RX
+#endif
+#ifdef RTA
+/* Miscellaneous defines for CIRRUS addresses and related logic for
+   interrupts etc.
+*/
+#define	MAP(a)		((short *)(cirrus_base + (a)))
+#define outp(a,b)	(*MAP (a) =(b))
+#define inp(a)		((*MAP (a)) & 0xff)
+#define	CIRRUS_FIRST	(short*)0x7300
+#define	CIRRUS_SECOND	(short*)0x7200
+#define	CIRRUS_THIRD	(short*)0x7100
+#define	CIRRUS_FOURTH	(short*)0x7000
+#define	PORTS_ON_CIRRUS	4
+#define	CIRRUS_FIFO_SIZE	12
+#define	SPACE		0x20
+#define	TAB		0x09
+#define	LINE_FEED	0x0a
+#define	CARRIAGE_RETURN	0x0d
+#define	BACKSPACE	0x08
+#define	SPACES_IN_TABS	8
+#define	SEND_ESCAPE	0x00
+#define START_BREAK	0x81
+#define	TIMER_TICK	0x82
+#define STOP_BREAK	0x83
+#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
+#define txack1	((short *)0x7104) 
+#define rxack1	((short *)0x7102) 
+#define mdack1  ((short *)0x7106)
+#define txack2  ((short *)0x7006) 
+#define rxack2	((short *)0x7004) 
+#define mdack2  ((short *)0x7100) 
+#define int_latch       ((short *) 0x7800)
+#define int_status      ((short *) 0x7c00) 
+#define tx1_pending     0x20 
+#define rx1_pending     0x10 
+#define md1_pending     0x40 
+#define tx2_pending     0x02 
+#define rx2_pending     0x01 
+#define md2_pending     0x40 
+#define module1_bits	0x07
+#define module1_modern	0x08
+#define module2_bits	0x70
+#define module2_modern	0x80
+#define module_blank	0xf
+#define rs232_d25	0x0
+#define	rs232_rj45	0x1
+#define rs422_d25	0x3
+#define parallel	0x5
+
+#define	CLK0	0x00
+#define CLK1	0x01
+#define CLK2	0x02
+#define CLK3	0x03
+#define CLK4	0x04
+
+#define CIRRUS_REVC    0x42
+#define CIRRUS_REVE    0x44
+
+#define	TURNON	1
+#define TURNOFF 0
+
+/* The list of CIRRUS registers. 
+   NB. These registers are relative values on 8 bit boundaries whereas
+   on the RTA's the CIRRUS registers are on word boundaries. Use pointer
+   arithmetic (short *) to obtain the real addresses required */
+#define ccr	0x05	/* Channel Command Register     */
+#define ier	0x06	/* Interrupt Enable Register    */
+#define cor1	0x08	/* Channel Option Register 1    */
+#define cor2	0x09	/* Channel Option Register 2    */
+#define cor3	0x0a	/* Channel Option Register 3    */
+#define cor4	0x1e	/* Channel Option Register 4    */
+#define	cor5	0x1f	/* Channel Option Register 5	*/
+
+#define ccsr	0x0b	/* Channel Control Status Register */
+#define rdcr	0x0e	/* Receive Data Count Register  */
+#define tdcr	0x12	/* Transmit Data Count Register */
+#define mcor1	0x15	/* Modem Change Option Register 1 */
+#define mcor2	0x16	/* Modem Change Option Regsiter 2 */
+
+#define livr	0x18	/* Local Interrupt Vector Register */
+#define schr1	0x1a	/* Special Character Register 1 */
+#define schr2	0x1b	/* Special Character Register 2 */
+#define schr3	0x1c	/* Special Character Register 3 */
+#define schr4	0x1d	/* Special Character Register 4 */
+
+#define rtr	0x20    /* Receive Timer Register */
+#define rtpr	0x21	/* Receive Timeout Period Register */
+#define lnc	0x24	/* Lnext character */
+
+#define rivr	0x43	/* Receive Interrupt Vector Register    */
+#define tivr	0x42	/* Transmit Interrupt Vector Register   */
+#define mivr	0x41	/* Modem Interrupt Vector Register      */
+#define gfrcr	0x40	/* Global Firmware Revision code Reg    */
+#define ricr	0x44	/* Receive Interrupting Channel Reg     */
+#define ticr	0x45	/* Transmit Interrupting Channel Reg    */
+#define micr	0x46	/* Modem Interrupting Channel Register  */
+
+#define gcr	0x4b	/* Global configuration register*/
+#define misr    0x4c    /* Modem interrupt status register */
+
+#define rbusr	0x59
+#define tbusr	0x5a
+#define mbusr	0x5b
+
+#define eoir	0x60	/* End Of Interrupt Register */
+#define rdsr	0x62	/* Receive Data / Status Register */
+#define tdr	0x63	/* Transmit Data Register */
+#define svrr	0x67	/* Service Request Register */
+
+#define car	0x68	/* Channel Access Register */
+#define mir	0x69	/* Modem Interrupt Register */
+#define tir	0x6a	/* Transmit Interrupt Register */
+#define rir	0x6b	/* Receive Interrupt Register */
+#define msvr1	0x6c	/* Modem Signal Value Register 1 */
+#define msvr2	0x6d	/* Modem Signal Value Register 2*/
+#define psvr	0x6f	/* Printer Signal Value Register*/
+
+#define tbpr	0x72	/* Transmit Baud Rate Period Register */
+#define tcor	0x76	/* Transmit Clock Option Register */
+
+#define rbpr	0x78	/* Receive Baud Rate Period Register */
+#define rber	0x7a	/* Receive Baud Rate Extension Register */
+#define rcor	0x7c	/* Receive Clock Option Register*/
+#define ppr	0x7e	/* Prescalar Period Register    */
+
+/* Misc registers used for forcing the 1400 out of its reset woes */
+#define airl	0x6d
+#define airm	0x6e
+#define airh	0x6f
+#define btcr	0x66
+#define mtcr	0x6c
+#define tber	0x74
+
+#endif				/* #ifdef RTA */
+
+
+/* Bit fields for particular registers */
+
+/* GCR */
+#define GCR_SERIAL	0x00	/* Configure as serial channel */
+#define GCR_PARALLEL	0x80	/* Configure as parallel channel */
+
+/* RDSR - when status read from FIFO */
+#define	RDSR_BREAK		0x08	/* Break received */
+#define RDSR_TIMEOUT    	0x80    /* No new data timeout */
+#define RDSR_SC1  	  	0x10    /* Special char 1 (tx XON) matched */
+#define RDSR_SC2  	  	0x20    /* Special char 2 (tx XOFF) matched */
+#define RDSR_SC12_MASK	  	0x30    /* Mask for special chars 1 and 2 */
+
+/* PPR */
+#define PPR_DEFAULT	0x31	/* Default value - for a 25Mhz clock gives
+				   a timeout period of 1ms */
+
+/* LIVR */
+#define	LIVR_EXCEPTION	0x07	/* Receive exception interrupt */
+
+/* CCR */
+#define	CCR_RESET	0x80	/* Reset channel */
+#define	CCR_CHANGE	0x4e	/* COR's have changed - NB always change all
+				   COR's */
+#define	CCR_WFLUSH	0x82	/* Flush transmit FIFO and TSR / THR */
+
+#define	CCR_SENDSC1	0x21	/* Send special character one */
+#define CCR_SENDSC2	0x22	/* Send special character two */
+#define CCR_SENDSC3	0x23	/* Send special character three */
+#define CCR_SENDSC4	0x24	/* Send special character four */
+
+#define CCR_TENABLE	0x18	/* Enable transmitter */
+#define	CCR_TDISABLE	0x14	/* Disable transmitter */
+#define CCR_RENABLE	0x12	/* Enable receiver */
+#define CCR_RDISABLE	0x11	/* Disable receiver */
+
+#define	CCR_READY	0x00	/* CCR is ready for another command */
+
+/* CCSR */
+#define CCSR_TXENABLE	0x08	/* Transmitter enable */
+#define CCSR_RXENABLE	0x80	/* Receiver enable */
+#define CCSR_TXFLOWOFF	0x04	/* Transmit flow off */
+#define CCSR_TXFLOWON	0x02	/* Transmit flow on */
+
+/* SVRR */
+#define	SVRR_RECEIVE	0x01	/* Receive interrupt pending */
+#define	SVRR_TRANSMIT	0x02	/* Transmit interrupt pending */
+#define	SVRR_MODEM	0x04	/* Modem interrupt pending */
+
+/* CAR */
+#define CAR_PORTS	0x03	/* Bit fields for ports */
+
+/* IER */
+#define	IER_MODEM	0x80	/* Change in modem status */
+#define	IER_RECEIVE	0x10	/* Good data / data exception */
+#define IER_TRANSMITR	0x04	/* Transmit ready (FIFO empty) */
+#define	IER_TRANSMITE	0x02	/* Transmit empty */
+#define IER_TIMEOUT	0x01	/* Timeout on no data */
+
+#define	IER_DEFAULT	0x94	/* Default values */
+#define IER_PARALLEL    0x84    /* Default for Parallel */
+#define	IER_EMPTY	0x92	/* Transmitter empty rather than ready */
+
+/* COR1 - Driver only */
+#define	COR1_INPCK	0x10	/* Check parity of received characters */
+
+/* COR1 - driver and RTA */
+#define	COR1_ODD	0x80	/* Odd parity */
+#define COR1_EVEN	0x00	/* Even parity */
+#define	COR1_NOP	0x00	/* No parity */
+#define	COR1_FORCE	0x20	/* Force parity */
+#define	COR1_NORMAL	0x40	/* With parity */
+#define	COR1_1STOP	0x00	/* 1 stop bit */
+#define	COR1_15STOP	0x04	/* 1.5 stop bits */
+#define	COR1_2STOP	0x08	/* 2 stop bits */
+#define	COR1_5BITS	0x00	/* 5 data bits */
+#define	COR1_6BITS	0x01	/* 6 data bits */
+#define	COR1_7BITS	0x02	/* 7 data bits */
+#define	COR1_8BITS	0x03	/* 8 data bits */
+
+#define COR1_HOST       0xef    /* Safe host bits */
+
+/* RTA only */
+#define COR1_CINPCK     0x00    /* Check parity of received characters */
+#define COR1_CNINPCK    0x10    /* Don't check parity */
+
+/* COR2 bits for both RTA and driver use */
+#define	COR2_IXANY	0x80	/* IXANY - any character is XON */
+#define	COR2_IXON	0x40	/* IXON - enable tx soft flowcontrol */
+#define	COR2_RTSFLOW	0x02	/* Enable tx hardware flow control */
+
+/* Additional driver bits */
+#define	COR2_HUPCL	0x20	/* Hang up on close */
+#define	COR2_CTSFLOW	0x04	/* Enable rx hardware flow control */
+#define	COR2_IXOFF	0x01	/* Enable rx software flow control */
+#define COR2_DTRFLOW	0x08	/* Enable tx hardware flow control */
+
+/* RTA use only */
+#define COR2_ETC	0x20	/* Embedded transmit options */
+#define	COR2_LOCAL	0x10	/* Local loopback mode */
+#define	COR2_REMOTE	0x08	/* Remote loopback mode */
+#define	COR2_HOST	0xc2	/* Safe host bits */
+
+/* COR3 - RTA use only */
+#define	COR3_SCDRNG	0x80	/* Enable special char detect for range */
+#define	COR3_SCD34	0x40	/* Special character detect for SCHR's 3 + 4 */
+#define	COR3_FCT	0x20	/* Flow control transparency */
+#define	COR3_SCD12	0x10	/* Special character detect for SCHR's 1 + 2 */
+#define	COR3_FIFO12	0x0c	/* 12 chars for receive FIFO threshold */
+#define COR3_FIFO10     0x0a    /* 10 chars for receive FIFO threshold */
+#define COR3_FIFO8      0x08    /* 8 chars for receive FIFO threshold */
+#define COR3_FIFO6      0x06    /* 6 chars for receive FIFO threshold */
+
+#define COR3_THRESHOLD  COR3_FIFO8	/* MUST BE LESS THAN MCOR_THRESHOLD */
+
+#define	COR3_DEFAULT	(COR3_FCT | COR3_THRESHOLD)
+				/* Default bits for COR3 */
+
+/* COR4 driver and RTA use */
+#define	COR4_IGNCR	0x80	/* Throw away CR's on input */
+#define	COR4_ICRNL	0x40	/* Map CR -> NL on input */
+#define	COR4_INLCR	0x20	/* Map NL -> CR on input */
+#define	COR4_IGNBRK	0x10	/* Ignore Break */
+#define	COR4_NBRKINT	0x08	/* No interrupt on break (-BRKINT) */
+#define COR4_RAISEMOD	0x01	/* Raise modem output lines on non-zero baud */
+
+
+/* COR4 driver only */
+#define COR4_IGNPAR	0x04	/* IGNPAR (ignore characters with errors) */
+#define COR4_PARMRK	0x02	/* PARMRK */
+
+#define COR4_HOST	0xf8	/* Safe host bits */
+
+/* COR4 RTA only */
+#define COR4_CIGNPAR	0x02	/* Thrown away bad characters */
+#define COR4_CPARMRK	0x04	/* PARMRK characters */
+#define COR4_CNPARMRK	0x03	/* Don't PARMRK */
+
+/* COR5 driver and RTA use */
+#define	COR5_ISTRIP	0x80	/* Strip input chars to 7 bits */
+#define	COR5_LNE	0x40	/* Enable LNEXT processing */
+#define	COR5_CMOE	0x20	/* Match good and errored characters */
+#define	COR5_ONLCR	0x02	/* NL -> CR NL on output */
+#define	COR5_OCRNL	0x01	/* CR -> NL on output */
+
+/*
+** Spare bits - these are not used in the CIRRUS registers, so we use
+** them to set various other features.
+*/
+/*
+** tstop and tbusy indication
+*/
+#define	COR5_TSTATE_ON	0x08	/* Turn on monitoring of tbusy and tstop */
+#define	COR5_TSTATE_OFF	0x04	/* Turn off monitoring of tbusy and tstop */
+/*
+** TAB3
+*/
+#define	COR5_TAB3	0x10	/* TAB3 mode */
+
+#define	COR5_HOST	0xc3	/* Safe host bits */
+
+/* CCSR */
+#define	CCSR_TXFLOFF	0x04	/* Tx is xoffed */
+
+/* MSVR1 */
+/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the
+   RTA. This is because otherwise DCD would get lost on the 1 parallel / 3
+   serial option.
+*/
+#define	MSVR1_CD	0x80	/* CD (DSR on Cirrus) */
+#define	MSVR1_RTS	0x40	/* RTS (CTS on Cirrus) */
+#define	MSVR1_RI	0x20	/* RI */
+#define	MSVR1_DTR	0x10	/* DTR (CD on Cirrus) */
+#define	MSVR1_CTS	0x01	/* CTS output pin (RTS on Cirrus) */
+/* Next two used to indicate state of tbusy and tstop to driver */
+#define	MSVR1_TSTOP	0x08	/* Set if port flow controlled */
+#define	MSVR1_TEMPTY	0x04	/* Set if port tx buffer empty */
+
+#define	MSVR1_HOST	0xf3	/* The bits the host wants */
+
+/* MSVR2 */
+#define	MSVR2_DSR	0x02	/* DSR output pin (DTR on Cirrus) */
+
+/* MCOR */
+#define	MCOR_CD	        0x80	/* CD (DSR on Cirrus) */
+#define	MCOR_RTS	0x40	/* RTS (CTS on Cirrus) */
+#define	MCOR_RI	        0x20	/* RI */
+#define	MCOR_DTR	0x10	/* DTR (CD on Cirrus) */
+
+#define MCOR_DEFAULT    (MCOR_CD | MCOR_RTS | MCOR_RI | MCOR_DTR)
+#define MCOR_FULLMODEM  MCOR_DEFAULT
+#define MCOR_RJ45       (MCOR_CD | MCOR_RTS | MCOR_DTR)
+#define MCOR_RESTRICTED (MCOR_CD | MCOR_RTS)
+
+/* More MCOR - H/W Handshake (flowcontrol) stuff */
+#define	MCOR_THRESH8	0x08	/* eight characters then we stop */
+#define	MCOR_THRESH9	0x09	/* nine characters then we stop */
+#define	MCOR_THRESH10	0x0A	/* ten characters then we stop */
+#define	MCOR_THRESH11	0x0B	/* eleven characters then we stop */
+
+#define	MCOR_THRESHBITS 0x0F	/* mask for ANDing out the above */
+
+#define	MCOR_THRESHOLD	MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */
+
+
+/* RTPR */
+#define RTPR_DEFAULT	0x02	/* Default */
+
+
+/* Defines for the subscripts of a CONFIG packet */
+#define	CONFIG_COR1	1	/* Option register 1 */
+#define	CONFIG_COR2	2	/* Option register 2 */
+#define	CONFIG_COR4	3	/* Option register 4 */
+#define	CONFIG_COR5	4	/* Option register 5 */
+#define	CONFIG_TXXON	5	/* Tx XON character */
+#define	CONFIG_TXXOFF	6	/* Tx XOFF character */
+#define	CONFIG_RXXON	7	/* Rx XON character */
+#define	CONFIG_RXXOFF	8	/* Rx XOFF character */
+#define CONFIG_LNEXT	9	/* LNEXT character */
+#define	CONFIG_TXBAUD	10	/* Tx baud rate */
+#define	CONFIG_RXBAUD	11	/* Rx baud rate */
+
+/* Port status stuff */
+#define	IDLE_CLOSED	0	/* Closed */
+#define IDLE_OPEN	1	/* Idle open */
+#define IDLE_BREAK	2	/* Idle on break */
+
+/* Subscript of MODEM STATUS packet */
+#define	MODEM_VALUE	3	/* Current values of handshake pins */
+/* Subscript of SBREAK packet */
+#define BREAK_LENGTH	1	/* Length of a break in slices of 0.01 seconds
+				   0 = stay on break until an EBREAK command
+				   is sent */
+
+
+#define	PRE_EMPTIVE	0x80	/* Pre-emptive bit in command field */
+
+/* Packet types going from Host to remote - with the exception of OPEN, MOPEN,
+   CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not
+   be used 
+*/
+#define	OPEN		0x00	/* Open a port */
+#define CONFIG		0x01	/* Configure a port */
+#define	MOPEN		0x02	/* Modem open (block for DCD) */
+#define	CLOSE		0x03	/* Close a port */
+#define	WFLUSH		(0x04 | PRE_EMPTIVE) /* Write flush */
+#define	RFLUSH		(0x05 | PRE_EMPTIVE) /* Read flush */
+#define	RESUME		(0x06 | PRE_EMPTIVE) /* Resume if xoffed */
+#define	SBREAK		0x07 	/* Start break */
+#define	EBREAK		0x08	/* End break */
+#define	SUSPEND		(0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
+#define FCLOSE          (0x0a | PRE_EMPTIVE) /* Force close */
+#define XPRINT          0x0b    /* Xprint packet */
+#define MBIS		(0x0c | PRE_EMPTIVE) /* Set modem lines */
+#define MBIC		(0x0d | PRE_EMPTIVE) /* Clear modem lines */
+#define MSET		(0x0e | PRE_EMPTIVE) /* Set modem lines */
+#define PCLOSE		0x0f	/* Pseudo close - Leaves rx/tx enabled */
+#define MGET		(0x10 | PRE_EMPTIVE) /* Force update of modem status */
+#define MEMDUMP		(0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */
+#define	READ_REGISTER	(0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */
+
+/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
+   use data[4] / data[3] to indicate current state and modem status respectively
+*/ 
+
+#define	COMPLETE	(0x20 | PRE_EMPTIVE)
+				/* Command complete */
+#define BREAK_RECEIVED	(0x21 | PRE_EMPTIVE)
+				/* Break received */
+#define MODEM_STATUS	(0x22 | PRE_EMPTIVE)
+				/* Change in modem status */
+
+/* "Command" packet that could go either way - handshake wake-up */
+#define HANDSHAKE	(0x23 | PRE_EMPTIVE)
+				/* Wake-up to HOST / RTA */
+
+#endif