Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

18 files changed, 0 insertions, 4874 deletions

diff --git a/drivers/char/ftape/zftape/Makefile b/drivers/char/ftape/zftape/Makefile
deleted file mode 100644
index 6d91c1f77c05..000000000000
--- a/drivers/char/ftape/zftape/Makefile
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-#       Copyright (C) 1996, 1997 Claus-Justus Heine.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING.  If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-# $Source: /homes/cvs/ftape-stacked/ftape/zftape/Makefile,v $
-# $Revision: 1.4 $
-# $Date: 1997/10/05 19:18:58 $
-#
-#      Makefile for the QIC-40/80/3010/3020 zftape interface VFS to
-#      ftape
-#
-
-
-# ZFT_OBSOLETE - enable the MTIOC_ZFTAPE_GETBLKSZ ioctl. You should
-#                leave this enabled for compatibility with taper.
-
-obj-$(CONFIG_ZFTAPE) += zftape.o
-
-zftape-objs := zftape-rw.o zftape-ctl.o zftape-read.o \
-	       zftape-write.o zftape-vtbl.o zftape-eof.o \
-	       zftape-init.o zftape-buffers.o zftape_syms.o
-
-EXTRA_CFLAGS := -DZFT_OBSOLETE
diff --git a/drivers/char/ftape/zftape/zftape-buffers.c b/drivers/char/ftape/zftape/zftape-buffers.c
deleted file mode 100644
index 7ebce2ec7897..000000000000
--- a/drivers/char/ftape/zftape/zftape-buffers.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *      Copyright (C) 1995-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-buffers.c,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:18:59 $
- *
- *      This file contains the dynamic buffer allocation routines 
- *      of zftape
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <linux/zftape.h>
-
-#include <linux/vmalloc.h>
-
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-eof.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-write.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-rw.h"
-#include "../zftape/zftape-vtbl.h"
-
-/*  global variables
- */
-
-/*  local varibales
- */
-static unsigned int used_memory;
-static unsigned int peak_memory;
-
-void zft_memory_stats(void)
-{
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_noise, "Memory usage (vmalloc allocations):\n"
-	      KERN_INFO "total allocated: %d\n"
-	      KERN_INFO "peak allocation: %d",
-	      used_memory, peak_memory);
-	peak_memory = used_memory;
-	TRACE_EXIT;
-}
-
-int zft_vcalloc_once(void *new, size_t size)
-{
-	TRACE_FUN(ft_t_flow);
-	if (zft_vmalloc_once(new, size) < 0) {
-		TRACE_EXIT -ENOMEM;
-	}
-	memset(*(void **)new, '\0', size);
-	TRACE_EXIT 0;
-}
-int zft_vmalloc_once(void *new, size_t size)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (*(void **)new != NULL || size == 0) {
-		TRACE_EXIT 0;
-	}
-	if ((*(void **)new = vmalloc(size)) == NULL) {
-		TRACE_EXIT -ENOMEM;
-	}
-	used_memory += size;
-	if (peak_memory < used_memory) {
-		peak_memory = used_memory;
-	}
-	TRACE_ABORT(0, ft_t_noise,
-		    "allocated buffer @ %p, %zd bytes", *(void **)new, size);
-}
-int zft_vmalloc_always(void *new, size_t size)
-{
-	TRACE_FUN(ft_t_flow);
-
-	zft_vfree(new, size);
-	TRACE_EXIT zft_vmalloc_once(new, size);
-}
-void zft_vfree(void *old, size_t size)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (*(void **)old) {
-		vfree(*(void **)old);
-		used_memory -= size;
-		TRACE(ft_t_noise, "released buffer @ %p, %zd bytes",
-		      *(void **)old, size);
-		*(void **)old = NULL;
-	}
-	TRACE_EXIT;
-}
-
-void *zft_kmalloc(size_t size)
-{
-	void *new;
-
-	while ((new = kmalloc(size, GFP_KERNEL)) == NULL) {
-		msleep_interruptible(100);
-	}
-	memset(new, 0, size);
-	used_memory += size;
-	if (peak_memory < used_memory) {
-		peak_memory = used_memory;
-	}
-	return new;
-}
-
-void zft_kfree(void *old, size_t size)
-{
-	kfree(old);
-	used_memory -= size;
-}
-
-/* there are some more buffers that are allocated on demand.
- * cleanup_module() calles this function to be sure to have released
- * them 
- */
-void zft_uninit_mem(void)
-{
-	TRACE_FUN(ft_t_flow);
-
-	zft_vfree(&zft_hseg_buf, FT_SEGMENT_SIZE);
-	zft_vfree(&zft_deblock_buf, FT_SEGMENT_SIZE); zft_deblock_segment = -1;
-	zft_free_vtbl();
-	if (zft_cmpr_lock(0 /* don't load */) == 0) {
-		(*zft_cmpr_ops->cleanup)();
-		(*zft_cmpr_ops->reset)(); /* unlock it again */
-	}
-	zft_memory_stats();
-	TRACE_EXIT;
-}
diff --git a/drivers/char/ftape/zftape/zftape-buffers.h b/drivers/char/ftape/zftape/zftape-buffers.h
deleted file mode 100644
index 798e3128c682..000000000000
--- a/drivers/char/ftape/zftape/zftape-buffers.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _FTAPE_DYNMEM_H
-#define _FTAPE_DYNMEM_H
-
-/*
- *      Copyright (C) 1995-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-buffers.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:18:59 $
- *
- *   memory allocation routines.
- *
- */
-
-/* we do not allocate all of the really large buffer memory before
- * someone tries to open the drive. ftape_open() may fail with
- * -ENOMEM, but that's better having 200k of vmalloced memory which
- * cannot be swapped out.
- */
-
-extern void  zft_memory_stats(void);
-extern int   zft_vmalloc_once(void *new, size_t size);
-extern int   zft_vcalloc_once(void *new, size_t size);
-extern int   zft_vmalloc_always(void *new, size_t size);
-extern void  zft_vfree(void *old, size_t size);
-extern void *zft_kmalloc(size_t size);
-extern void  zft_kfree(void *old, size_t size);
-
-/* called by cleanup_module() 
- */
-extern void zft_uninit_mem(void);
-
-#endif
-
-
-
-
-
-
-
diff --git a/drivers/char/ftape/zftape/zftape-ctl.c b/drivers/char/ftape/zftape/zftape-ctl.c
deleted file mode 100644
index 22ba0f5d00cf..000000000000
--- a/drivers/char/ftape/zftape/zftape-ctl.c
+++ /dev/null
@@ -1,1417 +0,0 @@
-/* 
- *      Copyright (C) 1996, 1997 Claus-Justus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-ctl.c,v $
- * $Revision: 1.2.6.2 $
- * $Date: 1997/11/14 18:07:33 $
- *
- *      This file contains the non-read/write zftape functions
- *      for the QIC-40/80/3010/3020 floppy-tape driver for Linux.
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/fcntl.h>
-
-#include <linux/zftape.h>
-
-#include <asm/uaccess.h>
-
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-eof.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-write.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-rw.h"
-#include "../zftape/zftape-vtbl.h"
-
-/*      Global vars.
- */
-int zft_write_protected; /* this is when cartridge rdonly or O_RDONLY */
-int zft_header_read;
-int zft_offline;
-unsigned int zft_unit;
-int zft_resid;
-int zft_mt_compression;
-
-/*      Local vars.
- */
-static int going_offline;
-
-typedef int (mt_fun)(int *argptr);
-typedef int (*mt_funp)(int *argptr);
-typedef struct
-{
-	mt_funp function;
-	unsigned offline         : 1; /* op permitted if offline or no_tape */
-	unsigned write_protected : 1; /* op permitted if write-protected    */
-	unsigned not_formatted   : 1; /* op permitted if tape not formatted */
-	unsigned raw_mode        : 1; /* op permitted if zft_mode == 0    */
-	unsigned need_idle_state : 1; /* need to call def_idle_state        */
-	char     *name;
-} fun_entry;
-
-static mt_fun mt_dummy, mt_reset, mt_fsr, mt_bsr, mt_rew, mt_offl, mt_nop,
-	mt_weof, mt_erase, mt_ras2, mt_setblk, mt_setdensity,
-	mt_seek, mt_tell, mt_reten, mt_eom, mt_fsf, mt_bsf,
-	mt_fsfm, mt_bsfm, mt_setdrvbuffer, mt_compression;
-
-static fun_entry mt_funs[]=
-{ 
-	{mt_reset       , 1, 1, 1, 1, 0, "MT_RESET" }, /*  0 */
-	{mt_fsf         , 0, 1, 0, 0, 1, "MT_FSF"   },
-	{mt_bsf         , 0, 1, 0, 0, 1, "MT_BSF"   },
-	{mt_fsr         , 0, 1, 0, 1, 1, "MT_FSR"   },
-	{mt_bsr         , 0, 1, 0, 1, 1, "MT_BSR"   },
-	{mt_weof        , 0, 0, 0, 0, 0, "MT_WEOF"  }, /*  5 */
-	{mt_rew         , 0, 1, 1, 1, 0, "MT_REW"   },
-	{mt_offl        , 0, 1, 1, 1, 0, "MT_OFFL"  },
-	{mt_nop         , 1, 1, 1, 1, 0, "MT_NOP"   },
-	{mt_reten       , 0, 1, 1, 1, 0, "MT_RETEN" },
-	{mt_bsfm        , 0, 1, 0, 0, 1, "MT_BSFM"  }, /* 10 */
-	{mt_fsfm        , 0, 1, 0, 0, 1, "MT_FSFM"  },
-	{mt_eom         , 0, 1, 0, 0, 1, "MT_EOM"   },
-	{mt_erase       , 0, 0, 0, 1, 0, "MT_ERASE" },
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_RAS1"  },
-	{mt_ras2        , 0, 0, 0, 1, 0, "MT_RAS2"  },
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_RAS3"  },
-	{mt_dummy       , 1, 1, 1, 1, 0, "UNKNOWN"  },
-	{mt_dummy       , 1, 1, 1, 1, 0, "UNKNOWN"  },
-	{mt_dummy       , 1, 1, 1, 1, 0, "UNKNOWN"  },
-	{mt_setblk      , 1, 1, 1, 1, 1, "MT_SETBLK"}, /* 20 */
-	{mt_setdensity  , 1, 1, 1, 1, 0, "MT_SETDENSITY"},
-	{mt_seek        , 0, 1, 0, 1, 1, "MT_SEEK"  },
-	{mt_dummy       , 0, 1, 0, 1, 1, "MT_TELL"  }, /* wr-only ?! */
-	{mt_setdrvbuffer, 1, 1, 1, 1, 0, "MT_SETDRVBUFFER" },
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_FSS"   }, /* 25 */
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_BSS"   },
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_WSM"   },
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_LOCK"  },
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_UNLOCK"},
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_LOAD"  }, /* 30 */
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_UNLOAD"},
-	{mt_compression , 1, 1, 1, 0, 1, "MT_COMPRESSION"},
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_SETPART"},
-	{mt_dummy       , 1, 1, 1, 1, 0, "MT_MKPART"}
-};  
-
-#define NR_MT_CMDS NR_ITEMS(mt_funs)
-
-void zft_reset_position(zft_position *pos)
-{
-	TRACE_FUN(ft_t_flow);
-
-	pos->seg_byte_pos =
-		pos->volume_pos = 0;
-	if (zft_header_read) {
-		/* need to keep track of the volume table and
-		 * compression map. We therefor simply
-		 * position at the beginning of the first
-		 * volume. This covers old ftape archives as
-		 * well has various flavours of the
-		 * compression map segments. The worst case is
-		 * that the compression map shows up as a
-		 * additional volume in front of all others.
-		 */
-		pos->seg_pos  = zft_find_volume(0)->start_seg;
-		pos->tape_pos = zft_calc_tape_pos(pos->seg_pos);
-	} else {
-		pos->tape_pos =  0;
-		pos->seg_pos  = -1;
-	}
-	zft_just_before_eof =  0;
-	zft_deblock_segment = -1;
-	zft_io_state        = zft_idle;
-	zft_zap_read_buffers();
-	zft_prevent_flush();
-	/*  unlock the compresison module if it is loaded.
-	 *  The zero arg means not to try to load the module.
-	 */
-	if (zft_cmpr_lock(0) == 0) {
-		(*zft_cmpr_ops->reset)(); /* unlock */
-	}
-	TRACE_EXIT;
-}
-
-static void zft_init_driver(void)
-{
-	TRACE_FUN(ft_t_flow);
-
-	zft_resid =
-		zft_header_read          =
-		zft_old_ftape            =
-		zft_offline              =
-		zft_write_protected      =
-		going_offline            =
-		zft_mt_compression       =
-		zft_header_changed       =
-		zft_volume_table_changed =
-		zft_written_segments     = 0;
-	zft_blk_sz = CONFIG_ZFT_DFLT_BLK_SZ;
-	zft_reset_position(&zft_pos); /* does most of the stuff */
-	ftape_zap_read_buffers();
-	ftape_set_state(idle);
-	TRACE_EXIT;
-}
-
-int zft_def_idle_state(void)
-{ 
-	int result = 0;
-	TRACE_FUN(ft_t_flow);
-	
-	if (!zft_header_read) {
-		result = zft_read_header_segments();
-	} else if ((result = zft_flush_buffers()) >= 0 && zft_qic_mode) {
-		/*  don't move past eof
-		 */
-		(void)zft_close_volume(&zft_pos);
-	}
-	if (ftape_abort_operation() < 0) {
-		TRACE(ft_t_warn, "ftape_abort_operation() failed");
-		result = -EIO;
-	}
-	/* clear remaining read buffers */
-	zft_zap_read_buffers();
-	zft_io_state = zft_idle;
-	TRACE_EXIT result;
-}
-
-/*****************************************************************************
- *                                                                           *
- *  functions for the MTIOCTOP commands                                      *
- *                                                                           *
- *****************************************************************************/
-
-static int mt_dummy(int *dummy)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE_EXIT -ENOSYS;
-}
-
-static int mt_reset(int *dummy)
-{        
-	TRACE_FUN(ft_t_flow);
-	
-	(void)ftape_seek_to_bot();
-	TRACE_CATCH(ftape_reset_drive(),
-		    zft_init_driver(); zft_uninit_mem(); zft_offline = 1);
-	/*  fake a re-open of the device. This will set all flage and 
-	 *  allocate buffers as appropriate. The new tape condition will
-	 *  force the open routine to do anything we need.
-	 */
-	TRACE_CATCH(_zft_open(-1 /* fake reopen */, 0 /* dummy */),);
-	TRACE_EXIT 0;
-}
-
-static int mt_fsf(int *arg)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-
-	result = zft_skip_volumes(*arg, &zft_pos);
-	zft_just_before_eof = 0;
-	TRACE_EXIT result;
-}
-
-static int mt_bsf(int *arg)
-{
-	int result = 0;
-	TRACE_FUN(ft_t_flow);
-	
-	if (*arg != 0) {
-		result = zft_skip_volumes(-*arg + 1, &zft_pos);
-	}
-	TRACE_EXIT result;
-}
-
-static int seek_block(__s64 data_offset,
-		      __s64 block_increment,
-		      zft_position *pos)
-{ 
-	int result      = 0;
-	__s64 new_block_pos;
-	__s64 vol_block_count;
-	const zft_volinfo *volume;
-	int exceed;
-	TRACE_FUN(ft_t_flow);
-	
-	volume = zft_find_volume(pos->seg_pos);
-	if (volume->start_seg == 0 || volume->end_seg == 0) {
-		TRACE_EXIT -EIO;
-	}
-	new_block_pos   = (zft_div_blksz(data_offset, volume->blk_sz)
-			   + block_increment);
-	vol_block_count = zft_div_blksz(volume->size, volume->blk_sz);
-	if (new_block_pos < 0) {
-		TRACE(ft_t_noise,
-		      "new_block_pos " LL_X " < 0", LL(new_block_pos));
-		zft_resid     = (int)new_block_pos;
-		new_block_pos = 0;
-		exceed = 1;
-	} else if (new_block_pos > vol_block_count) {
-		TRACE(ft_t_noise,
-		      "new_block_pos " LL_X " exceeds size of volume " LL_X,
-		      LL(new_block_pos), LL(vol_block_count));
-		zft_resid     = (int)(vol_block_count - new_block_pos);
-		new_block_pos = vol_block_count;
-		exceed = 1;
-	} else {
-		exceed = 0;
-	}
-	if (zft_use_compression && volume->use_compression) {
-		TRACE_CATCH(zft_cmpr_lock(1 /* try to load */),);
-		result = (*zft_cmpr_ops->seek)(new_block_pos, pos, volume,
-					       zft_deblock_buf);
-		pos->tape_pos  = zft_calc_tape_pos(pos->seg_pos);
-		pos->tape_pos += pos->seg_byte_pos;
-	} else {
-		pos->volume_pos = zft_mul_blksz(new_block_pos, volume->blk_sz);
-		pos->tape_pos   = zft_calc_tape_pos(volume->start_seg);
-		pos->tape_pos  += pos->volume_pos;
-		pos->seg_pos    = zft_calc_seg_byte_coord(&pos->seg_byte_pos,
-							  pos->tape_pos);
-	}
-	zft_just_before_eof = volume->size == pos->volume_pos;
-	if (zft_just_before_eof) {
-		/* why this? because zft_file_no checks agains start
-		 * and end segment of a volume. We do not want to
-		 * advance to the next volume with this function.
-		 */
-		TRACE(ft_t_noise, "set zft_just_before_eof");
-		zft_position_before_eof(pos, volume);
-	}
-	TRACE(ft_t_noise, "\n"
-	      KERN_INFO "new_seg_pos : %d\n"
-	      KERN_INFO "new_tape_pos: " LL_X "\n"
-	      KERN_INFO "vol_size    : " LL_X "\n"
-	      KERN_INFO "seg_byte_pos: %d\n"
-	      KERN_INFO "blk_sz  : %d", 
-	      pos->seg_pos, LL(pos->tape_pos),
-	      LL(volume->size), pos->seg_byte_pos,
-	      volume->blk_sz);
-	if (!exceed) {
-		zft_resid = new_block_pos - zft_div_blksz(pos->volume_pos,
-							  volume->blk_sz);
-	}
-	if (zft_resid < 0) {
-		zft_resid = -zft_resid;
-	}
-	TRACE_EXIT ((exceed || zft_resid != 0) && result >= 0) ? -EINVAL : result;
-}     
-
-static int mt_fsr(int *arg)
-{ 
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	result = seek_block(zft_pos.volume_pos,  *arg, &zft_pos);
-	TRACE_EXIT result;
-}
-
-static int mt_bsr(int *arg)
-{   
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	result = seek_block(zft_pos.volume_pos, -*arg, &zft_pos);
-	TRACE_EXIT result;
-}
-
-static int mt_weof(int *arg)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE_CATCH(zft_flush_buffers(),);
-	result = zft_weof(*arg, &zft_pos);
-	TRACE_EXIT result;
-}
-
-static int mt_rew(int *dummy)
-{          
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	if(zft_header_read) {
-		(void)zft_def_idle_state();
-	}
-	result = ftape_seek_to_bot();
-	zft_reset_position(&zft_pos);
-	TRACE_EXIT result;
-}
-
-static int mt_offl(int *dummy)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	going_offline= 1;
-	result = mt_rew(NULL);
-	TRACE_EXIT result;
-}
-
-static int mt_nop(int *dummy)
-{
-	TRACE_FUN(ft_t_flow);
-	/*  should we set tape status?
-	 */
-	if (!zft_offline) { /* offline includes no_tape */
-		(void)zft_def_idle_state();
-	}
-	TRACE_EXIT 0; 
-}
-
-static int mt_reten(int *dummy)
-{  
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	if(zft_header_read) {
-		(void)zft_def_idle_state();
-	}
-	result = ftape_seek_to_eot();
-	if (result >= 0) {
-		result = ftape_seek_to_bot();
-	}
-	TRACE_EXIT(result);
-}
-
-static int fsfbsfm(int arg, zft_position *pos)
-{ 
-	const zft_volinfo *vtbl;
-	__s64 block_pos;
-	TRACE_FUN(ft_t_flow);
-	
-	/* What to do? This should seek to the next file-mark and
-	 * position BEFORE. That is, a next write would just extend
-	 * the current file.  Well. Let's just seek to the end of the
-	 * current file, if count == 1.  If count > 1, then do a
-	 * "mt_fsf(count - 1)", and then seek to the end of that file.
-	 * If count == 0, do nothing
-	 */
-	if (arg == 0) {
-		TRACE_EXIT 0;
-	}
-	zft_just_before_eof = 0;
-	TRACE_CATCH(zft_skip_volumes(arg < 0 ? arg : arg-1, pos),
-		    if (arg > 0) {
-			    zft_resid ++; 
-		    });
-	vtbl      = zft_find_volume(pos->seg_pos);
-	block_pos = zft_div_blksz(vtbl->size, vtbl->blk_sz);
-	(void)seek_block(0, block_pos, pos);
-	if (pos->volume_pos != vtbl->size) {
-		zft_just_before_eof = 0;
-		zft_resid = 1;
-		/* we didn't managed to go there */
-		TRACE_ABORT(-EIO, ft_t_err, 
-			    "wanted file position " LL_X ", arrived at " LL_X, 
-			    LL(vtbl->size), LL(pos->volume_pos));
-	}
-	zft_just_before_eof = 1;
-	TRACE_EXIT 0; 
-}
-
-static int mt_bsfm(int *arg)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	result = fsfbsfm(-*arg, &zft_pos);
-	TRACE_EXIT result;
-}
-
-static int mt_fsfm(int *arg)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	result = fsfbsfm(*arg, &zft_pos);
-	TRACE_EXIT result;
-}
-
-static int mt_eom(int *dummy)
-{              
-	TRACE_FUN(ft_t_flow);
-	
-	zft_skip_to_eom(&zft_pos);
-	TRACE_EXIT 0;
-}
-
-static int mt_erase(int *dummy)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	result = zft_erase();
-	TRACE_EXIT result;
-}
-
-static int mt_ras2(int *dummy)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	result = -ENOSYS;
-	TRACE_EXIT result;
-} 
-
-/*  Sets the new blocksize in BYTES
- *
- */
-static int mt_setblk(int *new_size)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	if((unsigned int)(*new_size) > ZFT_MAX_BLK_SZ) {
-		TRACE_ABORT(-EINVAL, ft_t_info,
-			    "desired blk_sz (%d) should be <= %d bytes",
-			    *new_size, ZFT_MAX_BLK_SZ);
-	}
-	if ((*new_size & (FT_SECTOR_SIZE-1)) != 0) {
-		TRACE_ABORT(-EINVAL, ft_t_info,
-			"desired blk_sz (%d) must be a multiple of %d bytes",
-			    *new_size, FT_SECTOR_SIZE);
-	}
-	if (*new_size == 0) {
-		if (zft_use_compression) {
-			TRACE_ABORT(-EINVAL, ft_t_info,
-				    "Variable block size not yet "
-				    "supported with compression");
-		}
-		*new_size = 1;
-	}
-	zft_blk_sz = *new_size;
-	TRACE_EXIT 0;
-} 
-
-static int mt_setdensity(int *arg)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	SET_TRACE_LEVEL(*arg);
-	TRACE(TRACE_LEVEL, "tracing set to %d", TRACE_LEVEL);
-	if ((int)TRACE_LEVEL != *arg) {
-		TRACE_EXIT -EINVAL;
-	}
-	TRACE_EXIT 0;
-}          
-
-static int mt_seek(int *new_block_pos)
-{ 
-	int result= 0;        
-	TRACE_FUN(ft_t_any);
-	
-	result = seek_block(0, (__s64)*new_block_pos, &zft_pos);
-	TRACE_EXIT result;
-}
-
-/*  OK, this is totally different from SCSI, but the worst thing that can 
- *  happen is that there is not enough defragmentated memory that can be 
- *  allocated. Also, there is a hardwired limit of 16 dma buffers in the 
- *  stock ftape module. This shouldn't bring the system down.
- *
- * NOTE: the argument specifies the total number of dma buffers to use.
- *       The driver needs at least 3 buffers to function at all.
- * 
- */
-static int mt_setdrvbuffer(int *cnt)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (*cnt < 3) {
-		TRACE_EXIT -EINVAL;
-	}
-	TRACE_CATCH(ftape_set_nr_buffers(*cnt),);
-	TRACE_EXIT 0;
-}
-/* return the block position from start of volume 
- */
-static int mt_tell(int *arg)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	*arg   = zft_div_blksz(zft_pos.volume_pos,
-			       zft_find_volume(zft_pos.seg_pos)->blk_sz);
-	TRACE_EXIT 0;
-}
-
-static int mt_compression(int *arg)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	/*  Ok. We could also check whether compression is available at
-	 *  all by trying to load the compression module.  We could
-	 *  also check for a block size of 1 byte which is illegal
-	 *  with compression.  Instead of doing it here we rely on
-	 *  zftape_write() to do the proper checks.
-	 */
-	if ((unsigned int)*arg > 1) {
-		TRACE_EXIT -EINVAL;
-	}
-	if (*arg != 0 && zft_blk_sz == 1) { /* variable block size */
-		TRACE_ABORT(-EINVAL, ft_t_info,
-			    "Compression not yet supported "
-			    "with variable block size");
-	}
-	zft_mt_compression  = *arg;
-	if ((zft_unit & ZFT_ZIP_MODE) == 0) {
-		zft_use_compression = zft_mt_compression;
-	}
-	TRACE_EXIT 0;
-}
-
-/*  check whether write access is allowed. Write access is denied when
- *  + zft_write_protected == 1 -- this accounts for either hard write 
- *                                protection of the cartridge or for 
- *                                O_RDONLY access mode of the tape device
- *  + zft_offline == 1         -- this meany that there is either no tape 
- *                                or that the MTOFFLINE ioctl has been 
- *                                previously issued (`soft eject')
- *  + ft_formatted == 0        -- this means that the cartridge is not
- *                                formatted
- *  Then we distinuguish two cases. When zft_qic_mode is TRUE, then we try
- *  to emulate a `traditional' (aka SCSI like) UN*X tape device. Therefore we
- *  deny writes when
- *  + zft_qic_mode ==1 && 
- *       (!zft_tape_at_lbot() &&   -- tape no at logical BOT
- *        !(zft_tape_at_eom() ||   -- tape not at logical EOM (or EOD)
- *          (zft_tape_at_eom() &&
- *           zft_old_ftape())))    -- we can't add new volume to tapes 
- *                                    written by old ftape because ftape
- *                                    don't use the volume table
- *
- *  when the drive is in true raw mode (aka /dev/rawft0) then we don't 
- *  care about LBOT and EOM conditions. This device is intended for a 
- *  user level program that wants to truly implement the QIC-80 compliance
- *  at the logical data layout level of the cartridge, i.e. implement all
- *  that volume table and volume directory stuff etc.<
- */
-int zft_check_write_access(zft_position *pos)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (zft_offline) { /* offline includes no_tape */
-		TRACE_ABORT(-ENXIO,
-			    ft_t_info, "tape is offline or no cartridge");
-	}
-	if (!ft_formatted) {
-		TRACE_ABORT(-EACCES, ft_t_info, "tape is not formatted");
-	} 
-	if (zft_write_protected) {
-		TRACE_ABORT(-EACCES, ft_t_info, "cartridge write protected");
-	} 
-	if (zft_qic_mode) {
-		/*  check BOT condition */
-		if (!zft_tape_at_lbot(pos)) {
-			/*  protect cartridges written by old ftape if
-			 *  not at BOT because they use the vtbl
-			 *  segment for storing data
-			 */
-			if (zft_old_ftape) {
-				TRACE_ABORT(-EACCES, ft_t_warn, 
-      "Cannot write to cartridges written by old ftape when not at BOT");
-			}
-			/*  not at BOT, but allow writes at EOD, of course
-			 */
-			if (!zft_tape_at_eod(pos)) {
-				TRACE_ABORT(-EACCES, ft_t_info,
-					    "tape not at BOT and not at EOD");
-			}
-		}
-		/*  fine. Now the tape is either at BOT or at EOD. */
-	}
-	/* or in raw mode in which case we don't care about BOT and EOD */
-	TRACE_EXIT 0;
-}
-
-/*      OPEN routine called by kernel-interface code
- *
- *      NOTE: this is also called by mt_reset() with dev_minor == -1
- *            to fake a reopen after a reset.
- */
-int _zft_open(unsigned int dev_minor, unsigned int access_mode)
-{
-	static unsigned int tape_unit;
-	static unsigned int file_access_mode;
-	int result;
-	TRACE_FUN(ft_t_flow);
-
-	if ((int)dev_minor == -1) {
-		/* fake reopen */
-		zft_unit    = tape_unit;
-		access_mode = file_access_mode;
-		zft_init_driver(); /* reset all static data to defaults */
-	} else {
-		tape_unit        = dev_minor;
-		file_access_mode = access_mode;
-		if ((result = ftape_enable(FTAPE_SEL(dev_minor))) < 0) {
-			TRACE_ABORT(-ENXIO, ft_t_err,
-				    "ftape_enable failed: %d", result);
-		}
-		if (ft_new_tape || ft_no_tape || !ft_formatted ||
-		    (FTAPE_SEL(zft_unit) != FTAPE_SEL(dev_minor)) ||
-		    (zft_unit & ZFT_RAW_MODE) != (dev_minor & ZFT_RAW_MODE)) {
-			/* reset all static data to defaults,
-			 */
-			zft_init_driver(); 
-		}
-		zft_unit = dev_minor;
-	}
-	zft_set_flags(zft_unit); /* decode the minor bits */
-	if (zft_blk_sz == 1 && zft_use_compression) {
-		ftape_disable(); /* resets ft_no_tape */
-		TRACE_ABORT(-ENODEV, ft_t_warn, "Variable block size not yet "
-			    "supported with compression");
-	}
-	/*  no need for most of the buffers when no tape or not
-	 *  formatted.  for the read/write operations, it is the
-	 *  regardless whether there is no tape, a not-formatted tape
-	 *  or the whether the driver is soft offline.  
-	 *  Nevertheless we allow some ioctls with non-formatted tapes, 
-	 *  like rewind and reset.
-	 */
-	if (ft_no_tape || !ft_formatted) {
-		zft_uninit_mem();
-	}
-	if (ft_no_tape) {
-		zft_offline = 1; /* so we need not test two variables */
-	}
-	if ((access_mode == O_WRONLY || access_mode == O_RDWR) &&
-	    (ft_write_protected || ft_no_tape)) {
-		ftape_disable(); /* resets ft_no_tape */
-		TRACE_ABORT(ft_no_tape ? -ENXIO : -EROFS,
-			    ft_t_warn, "wrong access mode %s cartridge",
-			    ft_no_tape ? "without a" : "with write protected");
-	}
-	zft_write_protected = (access_mode == O_RDONLY || 
-			       ft_write_protected != 0);
-	if (zft_write_protected) {
-		TRACE(ft_t_noise,
-		      "read only access mode: %d, "
-		      "drive write protected: %d", 
-		      access_mode == O_RDONLY,
-		      ft_write_protected != 0);
-	}
-	if (!zft_offline) {
-		TRACE_CATCH(zft_vmalloc_once(&zft_deblock_buf,FT_SEGMENT_SIZE),
-			    ftape_disable());
-	}
-	/* zft_seg_pos should be greater than the vtbl segpos but not
-	 * if in compatibility mode and only after we read in the
-	 * header segments
-	 *
-	 * might also be a problem if the user makes a backup with a
-	 * *qft* device and rewinds it with a raw device.
-	 */
-	if (zft_qic_mode         &&
-	    !zft_old_ftape       &&
-	    zft_pos.seg_pos >= 0 &&
-	    zft_header_read      && 
-	    zft_pos.seg_pos <= ft_first_data_segment) {
-		TRACE(ft_t_noise, "you probably mixed up the zftape devices!");
-		zft_reset_position(&zft_pos); 
-	}
-	TRACE_EXIT 0;
-}
-
-/*      RELEASE routine called by kernel-interface code
- */
-int _zft_close(void)
-{
-	int result = 0;
-	TRACE_FUN(ft_t_flow);
-	
-	if (zft_offline) {
-		/* call the hardware release routine. Puts the drive offline */
-		ftape_disable();
-		TRACE_EXIT 0;
-	}
-	if (!(ft_write_protected || zft_old_ftape)) {
-		result = zft_flush_buffers();
-		TRACE(ft_t_noise, "writing file mark at current position");
-		if (zft_qic_mode && zft_close_volume(&zft_pos) == 0) {
-			zft_move_past_eof(&zft_pos);
-		}
-		if ((zft_tape_at_lbot(&zft_pos) ||
-		     !(zft_unit & FTAPE_NO_REWIND))) {
-			if (result >= 0) {
-				result = zft_update_header_segments();
-			} else {
-				TRACE(ft_t_err,
-				"Error: unable to update header segments");
-			}
-		}
-	}
-	ftape_abort_operation();
-	if (!(zft_unit & FTAPE_NO_REWIND)) {
-		TRACE(ft_t_noise, "rewinding tape");
-		if (ftape_seek_to_bot() < 0 && result >= 0) {
-			result = -EIO; /* keep old value */
-		}
-		zft_reset_position(&zft_pos);
-	} 
-	zft_zap_read_buffers();
-	/*  now free up memory as much as possible. We don't destroy
-	 *  the deblock buffer if it containes a valid segment.
-	 */
-	if (zft_deblock_segment == -1) {
-		zft_vfree(&zft_deblock_buf, FT_SEGMENT_SIZE); 
-	}
-	/* high level driver status, forces creation of a new volume
-	 * when calling ftape_write again and not zft_just_before_eof
-	 */
-	zft_io_state = zft_idle;  
-	if (going_offline) {
-		zft_init_driver();
-		zft_uninit_mem();
-		going_offline = 0;
-		zft_offline   = 1;
-	} else if (zft_cmpr_lock(0 /* don't load */) == 0) {
-		(*zft_cmpr_ops->reset)(); /* unlock it again */
-	}
-	zft_memory_stats();
-	/* call the hardware release routine. Puts the drive offline */
-	ftape_disable();
-	TRACE_EXIT result;
-}
-
-/*
- *  the wrapper function around the wrapper MTIOCTOP ioctl
- */
-static int mtioctop(struct mtop *mtop, int arg_size)
-{
-	int result = 0;
-	fun_entry *mt_fun_entry;
-	TRACE_FUN(ft_t_flow);
-	
-	if (arg_size != sizeof(struct mtop) || mtop->mt_op >= NR_MT_CMDS) {
-		TRACE_EXIT -EINVAL;
-	}
-	TRACE(ft_t_noise, "calling MTIOCTOP command: %s",
-	      mt_funs[mtop->mt_op].name);
-	mt_fun_entry= &mt_funs[mtop->mt_op];
-	zft_resid = mtop->mt_count;
-	if (!mt_fun_entry->offline && zft_offline) {
-		if (ft_no_tape) {
-			TRACE_ABORT(-ENXIO, ft_t_info, "no tape present");
-		} else {
-			TRACE_ABORT(-ENXIO, ft_t_info, "drive is offline");
-		}
-	}
-	if (!mt_fun_entry->not_formatted && !ft_formatted) {
-		TRACE_ABORT(-EACCES, ft_t_info, "tape is not formatted");
-	}
-	if (!mt_fun_entry->write_protected) {
-		TRACE_CATCH(zft_check_write_access(&zft_pos),);
-	}
-	if (mt_fun_entry->need_idle_state && !(zft_offline || !ft_formatted)) {
-		TRACE_CATCH(zft_def_idle_state(),);
-	}
-	if (!zft_qic_mode && !mt_fun_entry->raw_mode) {
-		TRACE_ABORT(-EACCES, ft_t_info, 
-"Drive needs to be in QIC-80 compatibility mode for this command");
-	}
-	result = (mt_fun_entry->function)(&mtop->mt_count);
-	if (zft_tape_at_lbot(&zft_pos)) {
-		TRACE_CATCH(zft_update_header_segments(),);
-	}
-	if (result >= 0) {
-		zft_resid = 0;
-	}
-	TRACE_EXIT result;
-}
-
-/*
- *  standard MTIOCGET ioctl
- */
-static int mtiocget(struct mtget *mtget, int arg_size)
-{
-	const zft_volinfo *volume;
-	__s64 max_tape_pos;
-	TRACE_FUN(ft_t_flow);
-	
-	if (arg_size != sizeof(struct mtget)) {
-		TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d",
-			    arg_size);
-	}
-	mtget->mt_type  = ft_drive_type.vendor_id + 0x800000;
-	mtget->mt_dsreg = ft_last_status.space;
-	mtget->mt_erreg = ft_last_error.space; /* error register */
-	mtget->mt_resid = zft_resid; /* residuum of writes, reads and
-				      * MTIOCTOP commands 
-				      */
-	if (!zft_offline) { /* neither no_tape nor soft offline */
-		mtget->mt_gstat = GMT_ONLINE(~0UL);
-		/* should rather return the status of the cartridge
-		 * than the access mode of the file, therefor use
-		 * ft_write_protected, not zft_write_protected 
-		 */
-		if (ft_write_protected) {
-			mtget->mt_gstat |= GMT_WR_PROT(~0UL);
-		}
-		if(zft_header_read) { /* this catches non-formatted */
-			volume = zft_find_volume(zft_pos.seg_pos);
-			mtget->mt_fileno = volume->count;
-			max_tape_pos = zft_capacity - zft_blk_sz;
-			if (zft_use_compression) {
-				max_tape_pos -= ZFT_CMPR_OVERHEAD;
-			}
-			if (zft_tape_at_eod(&zft_pos)) {
-				mtget->mt_gstat |= GMT_EOD(~0UL);
-			}
-			if (zft_pos.tape_pos > max_tape_pos) {
-				mtget->mt_gstat |= GMT_EOT(~0UL);
-			}
-			mtget->mt_blkno = zft_div_blksz(zft_pos.volume_pos,
-							volume->blk_sz);
-			if (zft_just_before_eof) {
-				mtget->mt_gstat |= GMT_EOF(~0UL);
-			}
-			if (zft_tape_at_lbot(&zft_pos)) {
-				mtget->mt_gstat |= GMT_BOT(~0UL);
-			}
-		} else {
-			mtget->mt_fileno = mtget->mt_blkno = -1;
-			if (mtget->mt_dsreg & QIC_STATUS_AT_BOT) {
-				mtget->mt_gstat |= GMT_BOT(~0UL);
-			}
-		}
-	} else {
-		if (ft_no_tape) {
-			mtget->mt_gstat = GMT_DR_OPEN(~0UL);
-		} else {
-			mtget->mt_gstat = 0UL;
-		}
- 		mtget->mt_fileno = mtget->mt_blkno = -1;
-	}
-	TRACE_EXIT 0;
-}
-
-#ifdef MTIOCRDFTSEG
-/*
- *  Read a floppy tape segment. This is useful for manipulating the
- *  volume table, and read the old header segment before re-formatting
- *  the cartridge.
- */
-static int mtiocrdftseg(struct mtftseg * mtftseg, int arg_size)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCRDFTSEG");
-	if (zft_qic_mode) {
-		TRACE_ABORT(-EACCES, ft_t_info,
-			    "driver needs to be in raw mode for this ioctl");
-	} 
-	if (arg_size != sizeof(struct mtftseg)) {
-		TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d",
-			    arg_size);
-	}
-	if (zft_offline) {
-		TRACE_EXIT -ENXIO;
-	}
-	if (mtftseg->mt_mode != FT_RD_SINGLE &&
-	    mtftseg->mt_mode != FT_RD_AHEAD) {
-		TRACE_ABORT(-EINVAL, ft_t_info, "invalid read mode");
-	}
-	if (!ft_formatted) {
-		TRACE_EXIT -EACCES; /* -ENXIO ? */
-
-	}
-	if (!zft_header_read) {
-		TRACE_CATCH(zft_def_idle_state(),);
-	}
-	if (mtftseg->mt_segno > ft_last_data_segment) {
-		TRACE_ABORT(-EINVAL, ft_t_info, "segment number is too large");
-	}
-	mtftseg->mt_result = ftape_read_segment(mtftseg->mt_segno,
-						zft_deblock_buf,
-						mtftseg->mt_mode);
-	if (mtftseg->mt_result < 0) {
-		/*  a negativ result is not an ioctl error. if
-		 *  the user wants to read damaged tapes,
-		 *  it's up to her/him
-		 */
-		TRACE_EXIT 0;
-	}
-	if (copy_to_user(mtftseg->mt_data,
-			 zft_deblock_buf,
-			 mtftseg->mt_result) != 0) {
-		TRACE_EXIT -EFAULT;
-	}
-	TRACE_EXIT 0;
-}
-#endif
-
-#ifdef MTIOCWRFTSEG
-/*
- *  write a floppy tape segment. This version features writing of
- *  deleted address marks, and gracefully ignores the (software)
- *  ft_formatted flag to support writing of header segments after
- *  formatting.
- */
-static int mtiocwrftseg(struct mtftseg * mtftseg, int arg_size)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCWRFTSEG");
-	if (zft_write_protected || zft_qic_mode) {
-		TRACE_EXIT -EACCES;
-	} 
-	if (arg_size != sizeof(struct mtftseg)) {
-		TRACE_ABORT(-EINVAL, ft_t_info, "bad argument size: %d",
-			    arg_size);
-	}
-	if (zft_offline) {
-		TRACE_EXIT -ENXIO;
-	}
-	if (mtftseg->mt_mode != FT_WR_ASYNC   && 
-	    mtftseg->mt_mode != FT_WR_MULTI   &&
-	    mtftseg->mt_mode != FT_WR_SINGLE  &&
-	    mtftseg->mt_mode != FT_WR_DELETE) {
-		TRACE_ABORT(-EINVAL, ft_t_info, "invalid write mode");
-	}
-	/*
-	 *  We don't check for ft_formatted, because this gives
-	 *  only the software status of the driver.
-	 *
-	 *  We assume that the user knows what it is
-	 *  doing. And rely on the low level stuff to fail
-	 *  when the tape isn't formatted. We only make sure
-	 *  that The header segment buffer is allocated,
-	 *  because it holds the bad sector map.
-	 */
-	if (zft_hseg_buf == NULL) {
-		TRACE_EXIT -ENXIO;
-	}
-	if (mtftseg->mt_mode != FT_WR_DELETE) {
-		if (copy_from_user(zft_deblock_buf, 
-				   mtftseg->mt_data,
-				   FT_SEGMENT_SIZE) != 0) {
-			TRACE_EXIT -EFAULT;
-		}
-	}
-	mtftseg->mt_result = ftape_write_segment(mtftseg->mt_segno, 
-						 zft_deblock_buf,
-						 mtftseg->mt_mode);
-	if (mtftseg->mt_result >= 0 && mtftseg->mt_mode == FT_WR_SINGLE) {
-		/*  
-		 *  a negativ result is not an ioctl error. if
-		 *  the user wants to write damaged tapes,
-		 *  it's up to her/him
-		 */
-		if ((result = ftape_loop_until_writes_done()) < 0) {
-			mtftseg->mt_result = result;
-		}
-	}
-	TRACE_EXIT 0;
-}
-#endif
-  
-#ifdef MTIOCVOLINFO
-/*
- *  get information about volume positioned at.
- */
-static int mtiocvolinfo(struct mtvolinfo *volinfo, int arg_size)
-{
-	const zft_volinfo *volume;
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCVOLINFO");
-	if (arg_size != sizeof(struct mtvolinfo)) {
-		TRACE_ABORT(-EINVAL,
-			    ft_t_info, "bad argument size: %d", arg_size);
-	}
-	if (zft_offline) {
-		TRACE_EXIT -ENXIO;
-	}
-	if (!ft_formatted) {
-		TRACE_EXIT -EACCES;
-	}
-	TRACE_CATCH(zft_def_idle_state(),);
-	volume = zft_find_volume(zft_pos.seg_pos);
-	volinfo->mt_volno   = volume->count;
-	volinfo->mt_blksz   = volume->blk_sz == 1 ? 0 : volume->blk_sz;
-	volinfo->mt_size    = volume->size >> 10;
-	volinfo->mt_rawsize = ((zft_calc_tape_pos(volume->end_seg + 1) >> 10) -
-			       (zft_calc_tape_pos(volume->start_seg) >> 10));
-	volinfo->mt_cmpr    = volume->use_compression;
-	TRACE_EXIT 0;
-}
-#endif
-
-#ifdef ZFT_OBSOLETE  
-static int mtioc_zftape_getblksz(struct mtblksz *blksz, int arg_size)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "\n"
-	      KERN_INFO "Mag tape ioctl command: MTIOC_ZTAPE_GETBLKSZ\n"
-	      KERN_INFO "This ioctl is here merely for compatibility.\n"
-	      KERN_INFO "Please use MTIOCVOLINFO instead");
-	if (arg_size != sizeof(struct mtblksz)) {
-		TRACE_ABORT(-EINVAL,
-			    ft_t_info, "bad argument size: %d", arg_size);
-	}
-	if (zft_offline) {
-		TRACE_EXIT -ENXIO;
-	}
-	if (!ft_formatted) {
-		TRACE_EXIT -EACCES;
-	}
-	TRACE_CATCH(zft_def_idle_state(),);
-	blksz->mt_blksz = zft_find_volume(zft_pos.seg_pos)->blk_sz;
-	TRACE_EXIT 0;
-}
-#endif
-
-#ifdef MTIOCGETSIZE
-/*
- *  get the capacity of the tape cartridge.
- */
-static int mtiocgetsize(struct mttapesize *size, int arg_size)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "Mag tape ioctl command: MTIOC_ZFTAPE_GETSIZE");
-	if (arg_size != sizeof(struct mttapesize)) {
-		TRACE_ABORT(-EINVAL,
-			    ft_t_info, "bad argument size: %d", arg_size);
-	}
-	if (zft_offline) {
-		TRACE_EXIT -ENXIO;
-	}
-	if (!ft_formatted) {
-		TRACE_EXIT -EACCES;
-	}
-	TRACE_CATCH(zft_def_idle_state(),);
-	size->mt_capacity = (unsigned int)(zft_capacity>>10);
-	size->mt_used     = (unsigned int)(zft_get_eom_pos()>>10);
-	TRACE_EXIT 0;
-}
-#endif
-
-static int mtiocpos(struct mtpos *mtpos, int arg_size)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCPOS");
-	if (arg_size != sizeof(struct mtpos)) {
-		TRACE_ABORT(-EINVAL,
-			    ft_t_info, "bad argument size: %d", arg_size);
-	}
-	result = mt_tell((int *)&mtpos->mt_blkno);
-	TRACE_EXIT result;
-}
-
-#ifdef MTIOCFTFORMAT
-/*
- * formatting of floppy tape cartridges. This is intended to be used
- * together with the MTIOCFTCMD ioctl and the new mmap feature 
- */
-
-/* 
- *  This function uses ftape_decode_header_segment() to inform the low
- *  level ftape module about the new parameters.
- *
- *  It erases the hseg_buf. The calling process must specify all
- *  parameters to assure proper operation.
- *
- *  return values: -EINVAL - wrong argument size
- *                 -EINVAL - if ftape_decode_header_segment() failed.
- */
-static int set_format_parms(struct ftfmtparms *p, __u8 *hseg_buf)
-{
-	ft_trace_t old_level = TRACE_LEVEL;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_noise, "MTIOCFTFORMAT operation FTFMT_SETPARMS");
-	memset(hseg_buf, 0, FT_SEGMENT_SIZE);
-	PUT4(hseg_buf, FT_SIGNATURE, FT_HSEG_MAGIC);
-
-	/*  fill in user specified parameters
-	 */
-	hseg_buf[FT_FMT_CODE] = (__u8)p->ft_fmtcode;
-	PUT2(hseg_buf, FT_SPT, p->ft_spt);
-	hseg_buf[FT_TPC]      = (__u8)p->ft_tpc;
-	hseg_buf[FT_FHM]      = (__u8)p->ft_fhm;
-	hseg_buf[FT_FTM]      = (__u8)p->ft_ftm;
-
-	/*  fill in sane defaults to make ftape happy.
-	 */ 
-	hseg_buf[FT_FSM] = (__u8)128; /* 128 is hard wired all over ftape */
-	if (p->ft_fmtcode == fmt_big) {
-		PUT4(hseg_buf, FT_6_HSEG_1,   0);
-		PUT4(hseg_buf, FT_6_HSEG_2,   1);
-		PUT4(hseg_buf, FT_6_FRST_SEG, 2);
-		PUT4(hseg_buf, FT_6_LAST_SEG, p->ft_spt * p->ft_tpc - 1);
-	} else {
-		PUT2(hseg_buf, FT_HSEG_1,    0);
-		PUT2(hseg_buf, FT_HSEG_2,    1);
-		PUT2(hseg_buf, FT_FRST_SEG,  2);
-		PUT2(hseg_buf, FT_LAST_SEG, p->ft_spt * p->ft_tpc - 1);
-	}
-
-	/*  Synchronize with the low level module. This is particularly
-	 *  needed for unformatted cartridges as the QIC std was previously 
-	 *  unknown BUT is needed to set data rate and to calculate timeouts.
-	 */
-	TRACE_CATCH(ftape_calibrate_data_rate(p->ft_qicstd&QIC_TAPE_STD_MASK),
-		    _res = -EINVAL);
-
-	/*  The following will also recalcualte the timeouts for the tape
-	 *  length and QIC std we want to format to.
-	 *  abort with -EINVAL rather than -EIO
-	 */
-	SET_TRACE_LEVEL(ft_t_warn);
-	TRACE_CATCH(ftape_decode_header_segment(hseg_buf),
-		    SET_TRACE_LEVEL(old_level); _res = -EINVAL);
-	SET_TRACE_LEVEL(old_level);
-	TRACE_EXIT 0;
-}
-
-/*
- *  Return the internal SOFTWARE status of the kernel driver. This does
- *  NOT query the tape drive about its status.
- */
-static int get_format_parms(struct ftfmtparms *p, __u8 *hseg_buffer)
-{
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_noise, "MTIOCFTFORMAT operation FTFMT_GETPARMS");
-	p->ft_qicstd  = ft_qic_std;
-	p->ft_fmtcode = ft_format_code;
-	p->ft_fhm     = hseg_buffer[FT_FHM];
-	p->ft_ftm     = hseg_buffer[FT_FTM];
-	p->ft_spt     = ft_segments_per_track;
-	p->ft_tpc     = ft_tracks_per_tape;
-	TRACE_EXIT 0;
-}
-
-static int mtiocftformat(struct mtftformat *mtftformat, int arg_size)
-{
-	int result;
-	union fmt_arg *arg = &mtftformat->fmt_arg;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCFTFORMAT");
-	if (zft_offline) {
-		if (ft_no_tape) {
-			TRACE_ABORT(-ENXIO, ft_t_info, "no tape present");
-		} else {
-			TRACE_ABORT(-ENXIO, ft_t_info, "drive is offline");
-		}
-	}
-	if (zft_qic_mode) {
-		TRACE_ABORT(-EACCES, ft_t_info,
-			    "driver needs to be in raw mode for this ioctl");
-	} 
-	if (zft_hseg_buf == NULL) {
-		TRACE_CATCH(zft_vcalloc_once(&zft_hseg_buf, FT_SEGMENT_SIZE),);
-	}
-	zft_header_read = 0;
-	switch(mtftformat->fmt_op) {
-	case FTFMT_SET_PARMS:
-		TRACE_CATCH(set_format_parms(&arg->fmt_parms, zft_hseg_buf),);
-		TRACE_EXIT 0;
-	case FTFMT_GET_PARMS:
-		TRACE_CATCH(get_format_parms(&arg->fmt_parms, zft_hseg_buf),);
-		TRACE_EXIT 0;
-	case FTFMT_FORMAT_TRACK:
-		if ((ft_formatted && zft_check_write_access(&zft_pos) < 0) ||
-		    (!ft_formatted && zft_write_protected)) {
-			TRACE_ABORT(-EACCES, ft_t_info, "Write access denied");
-		}
-		TRACE_CATCH(ftape_format_track(arg->fmt_track.ft_track,
-					       arg->fmt_track.ft_gap3),);
-		TRACE_EXIT 0;
-	case FTFMT_STATUS:
-		TRACE_CATCH(ftape_format_status(&arg->fmt_status.ft_segment),);
-		TRACE_EXIT 0;
-	case FTFMT_VERIFY:
-		TRACE_CATCH(ftape_verify_segment(arg->fmt_verify.ft_segment,
-				(SectorMap *)&arg->fmt_verify.ft_bsm),);
-		TRACE_EXIT 0;
-	default:
-		TRACE_ABORT(-EINVAL, ft_t_err, "Invalid format operation");
-	}
-	TRACE_EXIT result;
-}
-#endif
-
-#ifdef MTIOCFTCMD
-/*
- *  send a QIC-117 command to the drive, with optional timeouts,
- *  parameter and result bits. This is intended to be used together
- *  with the formatting ioctl.
- */
-static int mtiocftcmd(struct mtftcmd *ftcmd, int arg_size)
-{
-	int i;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_noise, "Mag tape ioctl command: MTIOCFTCMD");
-	if (!capable(CAP_SYS_ADMIN)) {
-		TRACE_ABORT(-EPERM, ft_t_info,
-			    "need CAP_SYS_ADMIN capability to send raw qic-117 commands");
-	}
-	if (zft_qic_mode) {
-		TRACE_ABORT(-EACCES, ft_t_info,
-			    "driver needs to be in raw mode for this ioctl");
-	} 
-	if (arg_size != sizeof(struct mtftcmd)) {
-		TRACE_ABORT(-EINVAL,
-			    ft_t_info, "bad argument size: %d", arg_size);
-	}
-	if (ftcmd->ft_wait_before) {
-		TRACE_CATCH(ftape_ready_wait(ftcmd->ft_wait_before,
-					     &ftcmd->ft_status),);
-	}
-	if (ftcmd->ft_status & QIC_STATUS_ERROR)
-		goto ftmtcmd_error;
-	if (ftcmd->ft_result_bits != 0) {
-		TRACE_CATCH(ftape_report_operation(&ftcmd->ft_result,
-						   ftcmd->ft_cmd,
-						   ftcmd->ft_result_bits),);
-	} else {
-		TRACE_CATCH(ftape_command(ftcmd->ft_cmd),);
-		if (ftcmd->ft_status & QIC_STATUS_ERROR)
-			goto ftmtcmd_error;
-		for (i = 0; i < ftcmd->ft_parm_cnt; i++) {
-			TRACE_CATCH(ftape_parameter(ftcmd->ft_parms[i]&0x0f),);
-			if (ftcmd->ft_status & QIC_STATUS_ERROR)
-				goto ftmtcmd_error;
-		}
-	}
-	if (ftcmd->ft_wait_after != 0) {
-		TRACE_CATCH(ftape_ready_wait(ftcmd->ft_wait_after,
-					     &ftcmd->ft_status),);
-	}
-ftmtcmd_error:	       
-	if (ftcmd->ft_status & QIC_STATUS_ERROR) {
-		TRACE(ft_t_noise, "error status set");
-		TRACE_CATCH(ftape_report_error(&ftcmd->ft_error,
-					       &ftcmd->ft_cmd, 1),);
-	}
-	TRACE_EXIT 0; /* this is not an i/o error */
-}
-#endif
-
-/*  IOCTL routine called by kernel-interface code
- */
-int _zft_ioctl(unsigned int command, void __user * arg)
-{
-	int result;
-	union { struct mtop       mtop;
-		struct mtget      mtget;
-		struct mtpos      mtpos;
-#ifdef MTIOCRDFTSEG
-		struct mtftseg    mtftseg;
-#endif
-#ifdef MTIOCVOLINFO
-		struct mtvolinfo  mtvolinfo;
-#endif
-#ifdef MTIOCGETSIZE
-		struct mttapesize mttapesize;
-#endif
-#ifdef MTIOCFTFORMAT
-		struct mtftformat mtftformat;
-#endif
-#ifdef ZFT_OBSOLETE
-		struct mtblksz mtblksz;
-#endif
-#ifdef MTIOCFTCMD
-		struct mtftcmd mtftcmd;
-#endif
-	} krnl_arg;
-	int arg_size = _IOC_SIZE(command);
-	int dir = _IOC_DIR(command);
-	TRACE_FUN(ft_t_flow);
-
-	/* This check will only catch arguments that are too large !
-	 */
-	if (dir & (_IOC_READ | _IOC_WRITE) && arg_size > sizeof(krnl_arg)) {
-		TRACE_ABORT(-EINVAL,
-			    ft_t_info, "bad argument size: %d", arg_size);
-	}
-	if (dir & _IOC_WRITE) {
-		if (copy_from_user(&krnl_arg, arg, arg_size) != 0) {
-			TRACE_EXIT -EFAULT;
-		}
-	}
-	TRACE(ft_t_flow, "called with ioctl command: 0x%08x", command);
-	switch (command) {
-	case MTIOCTOP:
-		result = mtioctop(&krnl_arg.mtop, arg_size);
-		break;
-	case MTIOCGET:
-		result = mtiocget(&krnl_arg.mtget, arg_size);
-		break;
-	case MTIOCPOS:
-		result = mtiocpos(&krnl_arg.mtpos, arg_size);
-		break;
-#ifdef MTIOCVOLINFO
-	case MTIOCVOLINFO:
-		result = mtiocvolinfo(&krnl_arg.mtvolinfo, arg_size);
-		break;
-#endif
-#ifdef ZFT_OBSOLETE
-	case MTIOC_ZFTAPE_GETBLKSZ:
-		result = mtioc_zftape_getblksz(&krnl_arg.mtblksz, arg_size);
-		break;
-#endif
-#ifdef MTIOCRDFTSEG
-	case MTIOCRDFTSEG: /* read a segment via ioctl */
-		result = mtiocrdftseg(&krnl_arg.mtftseg, arg_size);
-		break;
-#endif
-#ifdef MTIOCWRFTSEG
-	case MTIOCWRFTSEG: /* write a segment via ioctl */
-		result = mtiocwrftseg(&krnl_arg.mtftseg, arg_size);
-		break;
-#endif
-#ifdef MTIOCGETSIZE
-	case MTIOCGETSIZE:
-		result = mtiocgetsize(&krnl_arg.mttapesize, arg_size);
-		break;
-#endif
-#ifdef MTIOCFTFORMAT
-	case MTIOCFTFORMAT:
-		result = mtiocftformat(&krnl_arg.mtftformat, arg_size);
-		break;
-#endif
-#ifdef MTIOCFTCMD
-	case MTIOCFTCMD:
-		result = mtiocftcmd(&krnl_arg.mtftcmd, arg_size);
-		break;
-#endif
-	default:
-		result = -EINVAL;
-		break;
-	}
-	if ((result >= 0) && (dir & _IOC_READ)) {
-		if (copy_to_user(arg, &krnl_arg, arg_size) != 0) {
-			TRACE_EXIT -EFAULT;
-		}
-	}
-	TRACE_EXIT result;
-}
diff --git a/drivers/char/ftape/zftape/zftape-ctl.h b/drivers/char/ftape/zftape/zftape-ctl.h
deleted file mode 100644
index 8e6f2d7ac74e..000000000000
--- a/drivers/char/ftape/zftape/zftape-ctl.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef _ZFTAPE_CTL_H
-#define _ZFTAPE_CTL_H
-
-/*
- * Copyright (C) 1996, 1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version. 
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-ctl.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:02 $
- *
- *      This file contains the non-standard IOCTL related definitions
- *      for the QIC-40/80 floppy-tape driver for Linux.
- */
-
-#include <linux/ioctl.h>
-#include <linux/mtio.h>
-
-#include "../zftape/zftape-rw.h"
-
-#ifdef CONFIG_ZFTAPE_MODULE
-#define ftape_status (*zft_status)
-#endif
-
-extern int zft_offline;
-extern int zft_mt_compression;
-extern int zft_write_protected;
-extern int zft_header_read;
-extern unsigned int zft_unit;
-extern int zft_resid;
-
-extern void zft_reset_position(zft_position *pos);
-extern int  zft_check_write_access(zft_position *pos);
-extern int  zft_def_idle_state(void);
-
-/*  hooks for the VFS interface 
- */
-extern int  _zft_open(unsigned int dev_minor, unsigned int access_mode);
-extern int  _zft_close(void);
-extern int  _zft_ioctl(unsigned int command, void __user *arg);
-#endif
-
-
-
diff --git a/drivers/char/ftape/zftape/zftape-eof.c b/drivers/char/ftape/zftape/zftape-eof.c
deleted file mode 100644
index dcadcaee9ac1..000000000000
--- a/drivers/char/ftape/zftape/zftape-eof.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- *   I use these routines just to decide when I have to fake a 
- *   volume-table to preserve compatibility to original ftape.
- */
-/*
- *      Copyright (C) 1994-1995 Bas Laarhoven.
- *      
- *      Modified for zftape 1996, 1997 Claus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-eof.c,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:02 $
- *
- *      This file contains the eof mark handling code
- *      for the QIC-40/80 floppy-tape driver for Linux.
- */
-
-#include <linux/string.h>
-#include <linux/errno.h>
-
-#include <linux/zftape.h>
-
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-rw.h"
-#include "../zftape/zftape-eof.h"
-
-/*      Global vars.
- */
-
-/* a copy of the failed sector log from the header segment.
- */
-eof_mark_union *zft_eof_map;
-
-/* number of eof marks (entries in bad sector log) on tape.
- */
-int zft_nr_eof_marks = -1;
-
-
-/*      Local vars.
- */
-
-static char linux_tape_label[] = "Linux raw format V";
-enum { 
-	min_fmt_version = 1, max_fmt_version = 2 
-};
-static unsigned ftape_fmt_version = 0;
-
-
-/* Ftape (mis)uses the bad sector log to record end-of-file marks.
- * Initially (when the tape is erased) all entries in the bad sector
- * log are added to the tape's bad sector map. The bad sector log then
- * is cleared.
- *
- * The bad sector log normally contains entries of the form: 
- * even 16-bit word: segment number of bad sector 
- * odd 16-bit word: encoded date
- * There can be a total of 448 entries (1792 bytes).
- *
- * My guess is that no program is using this bad sector log (the *
- * format seems useless as there is no indication of the bad sector
- * itself, only the segment) However, if any program does use the bad
- * sector log, the format used by ftape will let the program think
- * there are some bad sectors and no harm is done.
- *  
- * The eof mark entries that ftape stores in the bad sector log: even
- * 16-bit word: segment number of eof mark odd 16-bit word: sector
- * number of eof mark [1..32]
- *  
- * The zft_eof_map as maintained is a sorted list of eof mark entries.
- *
- *
- * The tape name field in the header segments is used to store a linux
- * tape identification string and a version number.  This way the tape
- * can be recognized as a Linux raw format tape when using tools under
- * other OS's.
- *
- * 'Wide' QIC tapes (format code 4) don't have a failed sector list
- * anymore. That space is used for the (longer) bad sector map that
- * now is a variable length list too.  We now store our end-of-file
- * marker list after the bad-sector-map on tape. The list is delimited
- * by a (__u32) 0 entry.
- */
-
-int zft_ftape_validate_label(char *label)
-{
-	static char tmp_label[45];
-	int result = 0;
-	TRACE_FUN(ft_t_any);
-	
-	memcpy(tmp_label, label, FT_LABEL_SZ);
-	tmp_label[FT_LABEL_SZ] = '\0';
-	TRACE(ft_t_noise, "tape  label = `%s'", tmp_label);
-	ftape_fmt_version = 0;
-	if (memcmp(label, linux_tape_label, strlen(linux_tape_label)) == 0) {
-		int pos = strlen(linux_tape_label);
-		while (label[pos] >= '0' && label[pos] <= '9') {
-			ftape_fmt_version *= 10;
-			ftape_fmt_version = label[ pos++] - '0';
-		}
-		result = (ftape_fmt_version >= min_fmt_version &&
-			  ftape_fmt_version <= max_fmt_version);
-	}
-	TRACE(ft_t_noise, "format version = %d", ftape_fmt_version);
-	TRACE_EXIT result;
-}
-
-static __u8 * find_end_of_eof_list(__u8 * ptr, __u8 * limit)
-{
-	while (ptr + 3 < limit) {
-
-		if (get_unaligned((__u32*)ptr)) {
-			ptr += sizeof(__u32);
-		} else {
-			return ptr;
-		}
-	}
-	return NULL;
-}
-
-void zft_ftape_extract_file_marks(__u8* address)
-{
-	int i;
-	TRACE_FUN(ft_t_any);
-	
-	zft_eof_map = NULL;
-	if (ft_format_code == fmt_var || ft_format_code == fmt_big) {
-		__u8* end;
-		__u8* start = ftape_find_end_of_bsm_list(address);
-
-		zft_nr_eof_marks = 0;
-		if (start) {
-			start += 3; /* skip end of list mark */
-			end = find_end_of_eof_list(start, 
-						   address + FT_SEGMENT_SIZE);
-			if (end && end - start <= FT_FSL_SIZE) {
-				zft_nr_eof_marks = ((end - start) / 
-						    sizeof(eof_mark_union));
-				zft_eof_map = (eof_mark_union *)start;
-			} else {
-				TRACE(ft_t_err,
-				      "EOF Mark List is too long or damaged!");
-			}
-		} else {
-			TRACE(ft_t_err, 
-			      "Bad Sector List is too long or damaged !");
-		}
-	} else {
-		zft_eof_map = (eof_mark_union *)&address[FT_FSL];
-		zft_nr_eof_marks = GET2(address, FT_FSL_CNT);
-	}
-	TRACE(ft_t_noise, "number of file marks: %d", zft_nr_eof_marks);
-	if (ftape_fmt_version == 1) {
-		TRACE(ft_t_info, "swapping version 1 fields");
-		/* version 1 format uses swapped sector and segment
-		 * fields, correct that !  
-		 */
-		for (i = 0; i < zft_nr_eof_marks; ++i) {
-			__u16 tmp = GET2(&zft_eof_map[i].mark.segment,0);
-			PUT2(&zft_eof_map[i].mark.segment, 0, 
-			     GET2(&zft_eof_map[i].mark.date,0));
-			PUT2(&zft_eof_map[i].mark.date, 0, tmp);
-		}
-	}
-	for (i = 0; i < zft_nr_eof_marks; ++i) {
-		TRACE(ft_t_noise, "eof mark: %5d/%2d",
-			GET2(&zft_eof_map[i].mark.segment, 0), 
-			GET2(&zft_eof_map[i].mark.date,0));
-	}
-	TRACE_EXIT;
-}
-
-void zft_clear_ftape_file_marks(void)
-{
-	TRACE_FUN(ft_t_flow);
-	/*  Clear failed sector log: remove all tape marks. We
-	 *  don't use old ftape-style EOF-marks.
-	 */
-	TRACE(ft_t_info, "Clearing old ftape's eof map");
-	memset(zft_eof_map, 0, zft_nr_eof_marks * sizeof(__u32));
-	zft_nr_eof_marks = 0;
-	PUT2(zft_hseg_buf, FT_FSL_CNT, 0); /* nr of eof-marks */
-	zft_header_changed = 1;
-	zft_update_label(zft_hseg_buf);
-	TRACE_EXIT;
-}
diff --git a/drivers/char/ftape/zftape/zftape-eof.h b/drivers/char/ftape/zftape/zftape-eof.h
deleted file mode 100644
index 26568c26c518..000000000000
--- a/drivers/char/ftape/zftape/zftape-eof.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _ZFTAPE_EOF_H
-#define _ZFTAPE_EOF_H
-
-/*
- * Copyright (C) 1994-1995 Bas Laarhoven.
- * adaptaed for zftape 1996, 1997 by Claus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-eof.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:03 $
- *
- *      Definitions and declarations for the end of file markers
- *      for the QIC-40/80 floppy-tape driver for Linux.
- */
-
-#include <linux/ftape-header-segment.h>
-#include "../zftape/zftape-buffers.h"
-/*  failed sector log size (only used if format code != 4).
- */
-
-typedef union {
-	ft_fsl_entry mark;
-	__u32 entry;
-} eof_mark_union;
- 
-/*      ftape-eof.c defined global vars.
- */
-extern int zft_nr_eof_marks;
-extern eof_mark_union *zft_eof_map;
-
-/*      ftape-eof.c defined global functions.
- */
-extern void zft_ftape_extract_file_marks(__u8* address);
-extern int  zft_ftape_validate_label(char* label);
-extern void zft_clear_ftape_file_marks(void);
-
-#endif
diff --git a/drivers/char/ftape/zftape/zftape-init.c b/drivers/char/ftape/zftape/zftape-init.c
deleted file mode 100644
index 164a1aa77a2f..000000000000
--- a/drivers/char/ftape/zftape/zftape-init.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- *      Copyright (C) 1996, 1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- *      This file contains the code that registers the zftape frontend 
- *      to the ftape floppy tape driver for Linux
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#ifdef CONFIG_KMOD
-#include <linux/kmod.h>
-#endif
-#include <linux/fcntl.h>
-#include <linux/smp_lock.h>
-
-#include <linux/zftape.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-write.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-buffers.h"
-
-MODULE_AUTHOR("(c) 1996, 1997 Claus-Justus Heine "
-	      "(claus@momo.math.rwth-aachen.de)");
-MODULE_DESCRIPTION(ZFTAPE_VERSION " - "
-		   "VFS interface for the Linux floppy tape driver. "
-		   "Support for QIC-113 compatible volume table "
-		   "and builtin compression (lzrw3 algorithm)");
-MODULE_SUPPORTED_DEVICE("char-major-27");
-MODULE_LICENSE("GPL");
-
-/*      Global vars.
- */
-struct zft_cmpr_ops *zft_cmpr_ops = NULL;
-const ftape_info *zft_status;
-
-/*      Local vars.
- */
-static unsigned long busy_flag;
-
-static sigset_t orig_sigmask;
-
-/*  the interface to the kernel vfs layer
- */
-
-/* Note about llseek():
- *
- * st.c and tpqic.c update fp->f_pos but don't implment llseek() and
- * initialize the llseek component of the file_ops struct with NULL.
- * This means that the user will get the default seek, but the tape
- * device will not respect the new position, but happily read from the
- * old position. Think a zftape specific llseek() function would be
- * better, returning -ESPIPE. TODO.
- */
-
-static int  zft_open (struct inode *ino, struct file *filep);
-static int zft_close(struct inode *ino, struct file *filep);
-static int  zft_ioctl(struct inode *ino, struct file *filep,
-		      unsigned int command, unsigned long arg);
-static int  zft_mmap(struct file *filep, struct vm_area_struct *vma);
-static ssize_t zft_read (struct file *fp, char __user *buff,
-			 size_t req_len, loff_t *ppos);
-static ssize_t zft_write(struct file *fp, const char __user *buff,
-			 size_t req_len, loff_t *ppos);
-
-static const struct file_operations zft_cdev =
-{
-	.owner		= THIS_MODULE,
-	.read		= zft_read,
-	.write		= zft_write,
-	.ioctl		= zft_ioctl,
-	.mmap		= zft_mmap,
-	.open		= zft_open,
-	.release	= zft_close,
-};
-
-static struct class *zft_class;
-
-/*      Open floppy tape device
- */
-static int zft_open(struct inode *ino, struct file *filep)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-
-	nonseekable_open(ino, filep);
-	TRACE(ft_t_flow, "called for minor %d", iminor(ino));
-	if ( test_and_set_bit(0,&busy_flag) ) {
-		TRACE_ABORT(-EBUSY, ft_t_warn, "failed: already busy");
-	}
-	if ((iminor(ino) & ~(ZFT_MINOR_OP_MASK | FTAPE_NO_REWIND))
-	     > 
-	    FTAPE_SEL_D) {
-		clear_bit(0,&busy_flag);
-		TRACE_ABORT(-ENXIO, ft_t_err, "failed: invalid unit nr");
-	}
-	orig_sigmask = current->blocked;
-	sigfillset(&current->blocked);
-	result = _zft_open(iminor(ino), filep->f_flags & O_ACCMODE);
-	if (result < 0) {
-		current->blocked = orig_sigmask; /* restore mask */
-		clear_bit(0,&busy_flag);
-		TRACE_ABORT(result, ft_t_err, "_ftape_open failed");
-	} else {
-		/* Mask signals that will disturb proper operation of the
-		 * program that is calling.
-		 */
-		current->blocked = orig_sigmask;
-		sigaddsetmask (&current->blocked, _DO_BLOCK);
-		TRACE_EXIT 0;
-	}
-}
-
-/*      Close floppy tape device
- */
-static int zft_close(struct inode *ino, struct file *filep)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-
-	if ( !test_bit(0,&busy_flag) || iminor(ino) != zft_unit) {
-		TRACE(ft_t_err, "failed: not busy or wrong unit");
-		TRACE_EXIT 0;
-	}
-	sigfillset(&current->blocked);
-	result = _zft_close();
-	if (result < 0) {
-		TRACE(ft_t_err, "_zft_close failed");
-	}
-	current->blocked = orig_sigmask; /* restore before open state */
-	clear_bit(0,&busy_flag);
-	TRACE_EXIT 0;
-}
-
-/*      Ioctl for floppy tape device
- */
-static int zft_ioctl(struct inode *ino, struct file *filep,
-		     unsigned int command, unsigned long arg)
-{
-	int result = -EIO;
-	sigset_t old_sigmask;
-	TRACE_FUN(ft_t_flow);
-
-	if ( !test_bit(0,&busy_flag) || iminor(ino) != zft_unit || ft_failure) {
-		TRACE_ABORT(-EIO, ft_t_err,
-			    "failed: not busy, failure or wrong unit");
-	}
-	old_sigmask = current->blocked; /* save mask */
-	sigfillset(&current->blocked);
-	/* This will work as long as sizeof(void *) == sizeof(long) */
-	result = _zft_ioctl(command, (void __user *) arg);
-	current->blocked = old_sigmask; /* restore mask */
-	TRACE_EXIT result;
-}
-
-/*      Ioctl for floppy tape device
- */
-static int  zft_mmap(struct file *filep, struct vm_area_struct *vma)
-{
-	int result = -EIO;
-	sigset_t old_sigmask;
-	TRACE_FUN(ft_t_flow);
-
-	if ( !test_bit(0,&busy_flag) || 
-	    iminor(filep->f_dentry->d_inode) != zft_unit || 
-	    ft_failure)
-	{
-		TRACE_ABORT(-EIO, ft_t_err,
-			    "failed: not busy, failure or wrong unit");
-	}
-	old_sigmask = current->blocked; /* save mask */
-	sigfillset(&current->blocked);
-	if ((result = ftape_mmap(vma)) >= 0) {
-#ifndef MSYNC_BUG_WAS_FIXED
-		static struct vm_operations_struct dummy = { NULL, };
-		vma->vm_ops = &dummy;
-#endif
-	}
-	current->blocked = old_sigmask; /* restore mask */
-	TRACE_EXIT result;
-}
-
-/*      Read from floppy tape device
- */
-static ssize_t zft_read(struct file *fp, char __user *buff,
-			size_t req_len, loff_t *ppos)
-{
-	int result = -EIO;
-	sigset_t old_sigmask;
-	struct inode *ino = fp->f_dentry->d_inode;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_data_flow, "called with count: %ld", (unsigned long)req_len);
-	if (!test_bit(0,&busy_flag)  || iminor(ino) != zft_unit || ft_failure) {
-		TRACE_ABORT(-EIO, ft_t_err,
-			    "failed: not busy, failure or wrong unit");
-	}
-	old_sigmask = current->blocked; /* save mask */
-	sigfillset(&current->blocked);
-	result = _zft_read(buff, req_len);
-	current->blocked = old_sigmask; /* restore mask */
-	TRACE(ft_t_data_flow, "return with count: %d", result);
-	TRACE_EXIT result;
-}
-
-/*      Write to tape device
- */
-static ssize_t zft_write(struct file *fp, const char __user *buff,
-			 size_t req_len, loff_t *ppos)
-{
-	int result = -EIO;
-	sigset_t old_sigmask;
-	struct inode *ino = fp->f_dentry->d_inode;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_flow, "called with count: %ld", (unsigned long)req_len);
-	if (!test_bit(0,&busy_flag) || iminor(ino) != zft_unit || ft_failure) {
-		TRACE_ABORT(-EIO, ft_t_err,
-			    "failed: not busy, failure or wrong unit");
-	}
-	old_sigmask = current->blocked; /* save mask */
-	sigfillset(&current->blocked);
-	result = _zft_write(buff, req_len);
-	current->blocked = old_sigmask; /* restore mask */
-	TRACE(ft_t_data_flow, "return with count: %d", result);
-	TRACE_EXIT result;
-}
-
-/*                    END OF VFS INTERFACE 
- *          
- *****************************************************************************/
-
-/*  driver/module initialization
- */
-
-/*  the compression module has to call this function to hook into the zftape 
- *  code
- */
-int zft_cmpr_register(struct zft_cmpr_ops *new_ops)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	if (zft_cmpr_ops != NULL) {
-		TRACE_EXIT -EBUSY;
-	} else {
-		zft_cmpr_ops = new_ops;
-		TRACE_EXIT 0;
-	}
-}
-
-/*  lock the zft-compressor() module.
- */
-int zft_cmpr_lock(int try_to_load)
-{
-	if (zft_cmpr_ops == NULL) {
-#ifdef CONFIG_KMOD
-		if (try_to_load) {
-			request_module("zft-compressor");
-			if (zft_cmpr_ops == NULL) {
-				return -ENOSYS;
-			}
-		} else {
-			return -ENOSYS;
-		}
-#else
-		return -ENOSYS;
-#endif
-	}
-	(*zft_cmpr_ops->lock)();
-	return 0;
-}
-
-#ifdef CONFIG_ZFT_COMPRESSOR
-extern int zft_compressor_init(void);
-#endif
-
-/*  Called by modules package when installing the driver or by kernel
- *  during the initialization phase
- */
-int __init zft_init(void)
-{
-	int i;
-	TRACE_FUN(ft_t_flow);
-
-#ifdef MODULE
-	printk(KERN_INFO ZFTAPE_VERSION "\n");
-        if (TRACE_LEVEL >= ft_t_info) {
-		printk(
-KERN_INFO
-"(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n"
-KERN_INFO
-"vfs interface for ftape floppy tape driver.\n"
-KERN_INFO
-"Support for QIC-113 compatible volume table, dynamic memory allocation\n"
-KERN_INFO
-"and builtin compression (lzrw3 algorithm).\n");
-        }
-#else /* !MODULE */
-	/* print a short no-nonsense boot message */
-	printk(KERN_INFO ZFTAPE_VERSION "\n");
-#endif /* MODULE */
-	TRACE(ft_t_info, "zft_init @ 0x%p", zft_init);
-	TRACE(ft_t_info,
-	      "installing zftape VFS interface for ftape driver ...");
-	TRACE_CATCH(register_chrdev(QIC117_TAPE_MAJOR, "zft", &zft_cdev),);
-
-	zft_class = class_create(THIS_MODULE, "zft");
-	for (i = 0; i < 4; i++) {
-		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i), NULL, "qft%i", i);
-		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 4), NULL, "nqft%i", i);
-		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 16), NULL, "zqft%i", i);
-		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 20), NULL, "nzqft%i", i);
-		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 32), NULL, "rawqft%i", i);
-		class_device_create(zft_class, NULL, MKDEV(QIC117_TAPE_MAJOR, i + 36), NULL, "nrawrawqft%i", i);
-	}
-
-#ifdef CONFIG_ZFT_COMPRESSOR
-	(void)zft_compressor_init();
-#endif
-	zft_status = ftape_get_status(); /*  fetch global data of ftape 
-					  *  hardware driver 
-					  */
-	TRACE_EXIT 0;
-}
-
-
-/* Called by modules package when removing the driver 
- */
-static void zft_exit(void)
-{
-	int i;
-	TRACE_FUN(ft_t_flow);
-
-	if (unregister_chrdev(QIC117_TAPE_MAJOR, "zft") != 0) {
-		TRACE(ft_t_warn, "failed");
-	} else {
-		TRACE(ft_t_info, "successful");
-	}
-        for (i = 0; i < 4; i++) {
-		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i));
-		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 4));
-		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 16));
-		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 20));
-		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 32));
-		class_device_destroy(zft_class, MKDEV(QIC117_TAPE_MAJOR, i + 36));
-	}
-	class_destroy(zft_class);
-	zft_uninit_mem(); /* release remaining memory, if any */
-        printk(KERN_INFO "zftape successfully unloaded.\n");
-	TRACE_EXIT;
-}
-
-module_init(zft_init);
-module_exit(zft_exit);
diff --git a/drivers/char/ftape/zftape/zftape-init.h b/drivers/char/ftape/zftape/zftape-init.h
deleted file mode 100644
index 937e5d48c20e..000000000000
--- a/drivers/char/ftape/zftape/zftape-init.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _ZFTAPE_INIT_H
-#define _ZFTAPE_INIT_H
-
-/*
- * Copyright (C) 1996, 1997 Claus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-init.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:05 $
- *
- * This file contains definitions and macro for the vfs 
- * interface defined by zftape
- *
- */
-
-#include <linux/ftape-header-segment.h>
-
-#include "../lowlevel/ftape-tracing.h"
-#include "../lowlevel/ftape-ctl.h"
-#include "../lowlevel/ftape-read.h"
-#include "../lowlevel/ftape-write.h"
-#include "../lowlevel/ftape-bsm.h"
-#include "../lowlevel/ftape-io.h"
-#include "../lowlevel/ftape-buffer.h"
-#include "../lowlevel/ftape-format.h"
-
-#include "../zftape/zftape-rw.h"
-
-#ifdef MODULE
-#define ftape_status (*zft_status)
-#endif
-
-extern const  ftape_info *zft_status; /* needed for zftape-vtbl.h */
-
-#include "../zftape/zftape-vtbl.h"
-
-struct zft_cmpr_ops {
-	int (*write)(int *write_cnt,
-		     __u8 *dst_buf, const int seg_sz,
-		     const __u8 __user *src_buf, const int req_len, 
-		     const zft_position *pos, const zft_volinfo *volume);
-	int (*read)(int *read_cnt,
-		    __u8 __user *dst_buf, const int req_len,
-		    const __u8 *src_buf, const int seg_sz,
-		    const zft_position *pos, const zft_volinfo *volume);
-	int (*seek)(unsigned int new_block_pos,
-		    zft_position *pos, const zft_volinfo *volume,
-		    __u8 *buffer);
-	void (*lock)   (void);
-	void (*reset)  (void);
-	void (*cleanup)(void);
-};
-
-extern struct zft_cmpr_ops *zft_cmpr_ops;
-/* zftape-init.c defined global functions.
- */
-extern int                  zft_cmpr_register(struct zft_cmpr_ops *new_ops);
-extern int                  zft_cmpr_lock(int try_to_load);
-
-#endif
-
-
diff --git a/drivers/char/ftape/zftape/zftape-read.c b/drivers/char/ftape/zftape/zftape-read.c
deleted file mode 100644
index 214bf03dce68..000000000000
--- a/drivers/char/ftape/zftape/zftape-read.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- *      Copyright (C) 1996, 1997 Claus-Justus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-read.c,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:06 $
- *
- *      This file contains the high level reading code
- *      for the QIC-117 floppy-tape driver for Linux.
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-
-#include <linux/zftape.h>
-
-#include <asm/uaccess.h>
-
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-eof.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-write.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-rw.h"
-#include "../zftape/zftape-vtbl.h"
-
-/*      Global vars.
- */
-int zft_just_before_eof;
-
-/*      Local vars.
- */
-static int buf_len_rd;
-
-void zft_zap_read_buffers(void)
-{
-	buf_len_rd = 0;
-}
-
-int zft_read_header_segments(void)      
-{
-	TRACE_FUN(ft_t_flow);
-
-	zft_header_read = 0;
-	TRACE_CATCH(zft_vmalloc_once(&zft_hseg_buf, FT_SEGMENT_SIZE),);
-	TRACE_CATCH(ftape_read_header_segment(zft_hseg_buf),);
-	TRACE(ft_t_info, "Segments written since first format: %d",
-	      (int)GET4(zft_hseg_buf, FT_SEG_CNT));
-	zft_qic113 = (ft_format_code != fmt_normal &&
-		      ft_format_code != fmt_1100ft &&
-		      ft_format_code != fmt_425ft);
-	TRACE(ft_t_info, "ft_first_data_segment: %d, ft_last_data_segment: %d", 
-	      ft_first_data_segment, ft_last_data_segment);
-	zft_capacity = zft_get_capacity();
-	zft_old_ftape = zft_ftape_validate_label(&zft_hseg_buf[FT_LABEL]);
-	if (zft_old_ftape) {
-		TRACE(ft_t_info, 
-"Found old ftaped tape, emulating eof marks, entering read-only mode");
-		zft_ftape_extract_file_marks(zft_hseg_buf);
-		TRACE_CATCH(zft_fake_volume_headers(zft_eof_map, 
-						    zft_nr_eof_marks),);
-	} else {
-		/* the specs say that the volume table must be
-		 * initialized with zeroes during formatting, so it
-		 * MUST be readable, i.e. contain vaid ECC
-		 * information.  
-		 */
-		TRACE_CATCH(ftape_read_segment(ft_first_data_segment, 
-					       zft_deblock_buf, 
-					       FT_RD_SINGLE),);
-		TRACE_CATCH(zft_extract_volume_headers(zft_deblock_buf),);
-	}
-	zft_header_read = 1;
-	zft_set_flags(zft_unit);
-	zft_reset_position(&zft_pos);
-	TRACE_EXIT 0;
-}
-
-int zft_fetch_segment_fraction(const unsigned int segment, void *buffer,
-			       const ft_read_mode_t read_mode,
-			       const unsigned int start,
-			       const unsigned int size)
-{
-	int seg_sz;
-	TRACE_FUN(ft_t_flow);
-
-	if (segment == zft_deblock_segment) {
-		TRACE(ft_t_data_flow,
-		      "re-using segment %d already in deblock buffer",
-		      segment);
-		seg_sz = zft_get_seg_sz(segment);
-		if (start > seg_sz) {
-			TRACE_ABORT(-EINVAL, ft_t_bug,
-				    "trying to read beyond end of segment:\n"
-				    KERN_INFO "seg_sz : %d\n"
-				    KERN_INFO "start  : %d\n"
-				    KERN_INFO "segment: %d",
-				    seg_sz, start, segment);
-		}
-		if ((start + size) > seg_sz) {
-			TRACE_EXIT seg_sz - start;
-		}
-		TRACE_EXIT size;
-	}
-	seg_sz = ftape_read_segment_fraction(segment, buffer, read_mode,
-					     start, size);
-	TRACE(ft_t_data_flow, "segment %d, result %d", segment, seg_sz);
-	if ((int)seg_sz >= 0 && start == 0 && size == FT_SEGMENT_SIZE) {
-		/*  this implicitly assumes that we are always called with
-		 *  buffer == zft_deblock_buf 
-		 */
-		zft_deblock_segment = segment;
-	} else {
-		zft_deblock_segment = -1;
-	}
-	TRACE_EXIT seg_sz;
-}
-
-/*
- * out:
- *
- * int *read_cnt: the number of bytes we removed from the
- *                zft_deblock_buf (result)
- *
- * int *to_do   : the remaining size of the read-request. Is changed.
- *
- * in:
- *
- * char *buff      : buff is the address of the upper part of the user
- *                   buffer, that hasn't been filled with data yet.
- * int buf_pos_read: copy of buf_pos_rd
- * int buf_len_read: copy of buf_len_rd
- * char *zft_deblock_buf: ftape_zft_deblock_buf
- *
- * returns the amount of data actually copied to the user-buffer
- *
- * to_do MUST NOT SHRINK except to indicate an EOT. In this case to_do
- * has to be set to 0. We cannot return -ENOSPC, because we return the
- * amount of data actually * copied to the user-buffer
- */
-static int zft_simple_read (int *read_cnt, 
-			    __u8  __user *dst_buf, 
-			    const int to_do, 
-			    const __u8 *src_buf, 
-			    const int seg_sz, 
-			    const zft_position *pos,
-			    const zft_volinfo *volume)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (seg_sz - pos->seg_byte_pos < to_do) {
-		*read_cnt = seg_sz - pos->seg_byte_pos;
-	} else {
-		*read_cnt = to_do;
-	}
-	if (copy_to_user(dst_buf, 
-			 src_buf + pos->seg_byte_pos, *read_cnt) != 0) {
-		TRACE_EXIT -EFAULT;
-	}
-	TRACE(ft_t_noise, "nr bytes just read: %d", *read_cnt);
-	TRACE_EXIT *read_cnt;
-}
-
-/* req_len: gets clipped due to EOT of EOF.
- * req_clipped: is a flag indicating whether req_len was clipped or not
- * volume: contains information on current volume (blk_sz etc.)
- */
-static int check_read_access(int *req_len, 
-			     const zft_volinfo **volume,
-			     int *req_clipped, 
-			     const zft_position *pos)
-{
-	static __s64 remaining;
-	static int eod;
-	TRACE_FUN(ft_t_flow);
-	
-	if (zft_io_state != zft_reading) {
-		if (zft_offline) { /* offline includes no_tape */
-			TRACE_ABORT(-ENXIO, ft_t_warn,
-				    "tape is offline or no cartridge");
-		}
-		if (!ft_formatted) {
-			TRACE_ABORT(-EACCES,
-				    ft_t_warn, "tape is not formatted");
-		}
-		/*  now enter defined state, read header segment if not
-		 *  already done and flush write buffers
-		 */
-		TRACE_CATCH(zft_def_idle_state(),);
-		zft_io_state = zft_reading;
-		if (zft_tape_at_eod(pos)) {
-			eod = 1;
-			TRACE_EXIT 1;
-		}
-		eod = 0;
-		*volume = zft_find_volume(pos->seg_pos);
-		/* get the space left until EOF */
-		remaining = zft_check_for_eof(*volume, pos);
-		buf_len_rd = 0;
-		TRACE(ft_t_noise, "remaining: " LL_X ", vol_no: %d",
-		      LL(remaining), (*volume)->count);
-	} else if (zft_tape_at_eod(pos)) {
-		if (++eod > 2) {
-			TRACE_EXIT -EIO; /* st.c also returns -EIO */
-		} else {
-			TRACE_EXIT 1;
-		}
-	}
-	if ((*req_len % (*volume)->blk_sz) != 0) {
-		/*  this message is informational only. The user gets the
-		 *  proper return value
-		 */
-		TRACE_ABORT(-EINVAL, ft_t_info,
-			    "req_len %d not a multiple of block size %d",
-			    *req_len, (*volume)->blk_sz);
-	}
-	/* As GNU tar doesn't accept partial read counts when the
-	 * multiple volume flag is set, we make sure to return the
-	 * requested amount of data. Except, of course, at the end of
-	 * the tape or file mark.  
-	 */
-	remaining -= *req_len;
-	if (remaining <= 0) {
-		TRACE(ft_t_noise, 
-		      "clipped request from %d to %d.", 
-		      *req_len, (int)(*req_len + remaining));
-		*req_len += remaining;
-		*req_clipped = 1;
-	} else {
-		*req_clipped = 0;
-	}
-	TRACE_EXIT 0;
-}
-
-/* this_segs_size: the current segment's size.
- * buff: the USER-SPACE buffer provided by the calling function.
- * req_len: how much data should be read at most.
- * volume: contains information on current volume (blk_sz etc.)
- */  
-static int empty_deblock_buf(__u8 __user *usr_buf, const int req_len,
-			     const __u8 *src_buf, const int seg_sz,
-			     zft_position *pos,
-			     const zft_volinfo *volume)
-{
-	int cnt;
-	int result = 0;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_data_flow, "this_segs_size: %d", seg_sz);
-	if (zft_use_compression && volume->use_compression) {
-		TRACE_CATCH(zft_cmpr_lock(1 /* try to load */),);
-		TRACE_CATCH(result= (*zft_cmpr_ops->read)(&cnt,
-							  usr_buf, req_len,
-							  src_buf, seg_sz,
-							  pos, volume),);
-	} else {                                  
-		TRACE_CATCH(result= zft_simple_read (&cnt,
-						     usr_buf, req_len,
-						     src_buf, seg_sz,
-						     pos, volume),);
-	}
-	pos->volume_pos   += result;
-        pos->tape_pos     += cnt;
-	pos->seg_byte_pos += cnt;
-	buf_len_rd        -= cnt; /* remaining bytes in buffer */
-	TRACE(ft_t_data_flow, "buf_len_rd: %d, cnt: %d", buf_len_rd, cnt);
-	if(pos->seg_byte_pos >= seg_sz) {
-		pos->seg_pos++;
-		pos->seg_byte_pos = 0;
-	}
-	TRACE(ft_t_data_flow, "bytes moved out of deblock-buffer: %d", cnt);
-	TRACE_EXIT result;
-}
-
-
-/* note: we store the segment id of the segment that is inside the
- * deblock buffer. This spares a lot of ftape_read_segment()s when we
- * use small block-sizes. The block-size may be 1kb (SECTOR_SIZE). In
- * this case a MTFSR 28 maybe still inside the same segment.
- */
-int _zft_read(char __user *buff, int req_len)
-{
-	int req_clipped;
-	int result     = 0;
-	int bytes_read = 0;
-	static unsigned int seg_sz = 0;
-	static const zft_volinfo *volume = NULL;
-	TRACE_FUN(ft_t_flow);
-	
-	zft_resid = req_len;
-	result = check_read_access(&req_len, &volume,
-				   &req_clipped, &zft_pos);
-	switch(result) {
-	case 0: 
-		break; /* nothing special */
-	case 1: 
-		TRACE(ft_t_noise, "EOD reached");
-		TRACE_EXIT 0;   /* EOD */
-	default:
-		TRACE_ABORT(result, ft_t_noise,
-			    "check_read_access() failed with result %d",
-			    result);
-		TRACE_EXIT result;
-	}
-	while (req_len > 0) { 
-		/*  Allow escape from this loop on signal !
-		 */
-		FT_SIGNAL_EXIT(_DONT_BLOCK);
-		/* buf_len_rd == 0 means that we need to read a new
-		 * segment.
-		 */
-		if (buf_len_rd == 0) {
-			while((result = zft_fetch_segment(zft_pos.seg_pos,
-							  zft_deblock_buf,
-							  FT_RD_AHEAD)) == 0) {
-				zft_pos.seg_pos ++;
-				zft_pos.seg_byte_pos = 0;
-			}
-			if (result < 0) {
-				zft_resid -= bytes_read;
-				TRACE_ABORT(result, ft_t_noise,
-					    "zft_fetch_segment(): %d",
-					    result);
-			}
-			seg_sz = result;
-			buf_len_rd = seg_sz - zft_pos.seg_byte_pos;
-		}
-		TRACE_CATCH(result = empty_deblock_buf(buff, 
-						       req_len,
-						       zft_deblock_buf, 
-						       seg_sz, 
-						       &zft_pos,
-						       volume),
-			    zft_resid -= bytes_read);
-		TRACE(ft_t_data_flow, "bytes just read: %d", result);
-		bytes_read += result; /* what we got so far       */
-		buff       += result; /* index in user-buffer     */
-		req_len    -= result; /* what's left from req_len */
-	} /* while (req_len  > 0) */
-	if (req_clipped) {
-		TRACE(ft_t_data_flow,
-		      "maybe partial count because of eof mark");
-		if (zft_just_before_eof && bytes_read == 0) {
-			/* req_len was > 0, but user didn't get
-			 * anything the user has read in the eof-mark 
-			 */
-			zft_move_past_eof(&zft_pos);
-			ftape_abort_operation();
-		} else {
-			/* don't skip to the next file before the user
-			 * tried to read a second time past EOF Just
-			 * mark that we are at EOF and maybe decrement
-			 * zft_seg_pos to stay in the same volume;
-			 */
-			zft_just_before_eof = 1;
-			zft_position_before_eof(&zft_pos, volume);
-			TRACE(ft_t_noise, "just before eof");
-		}
-	}
-	zft_resid -= result; /* for MTSTATUS       */
-	TRACE_EXIT bytes_read;
-}
diff --git a/drivers/char/ftape/zftape/zftape-read.h b/drivers/char/ftape/zftape/zftape-read.h
deleted file mode 100644
index 42941de0c23a..000000000000
--- a/drivers/char/ftape/zftape/zftape-read.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ZFTAPE_READ_H
-#define _ZFTAPE_READ_H
-
-/*
- * Copyright (C) 1996, 1997 Claus-Justus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-read.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:07 $
- *
- *      This file contains the definitions for the read functions
- *      for the zftape driver for Linux.
- *
- */
-
-#include "../lowlevel/ftape-read.h"
-
-/*      ftape-read.c defined global vars.
- */
-extern int zft_just_before_eof;
-	
-/*      ftape-read.c defined global functions.
- */
-extern void zft_zap_read_buffers(void);
-extern int  zft_read_header_segments(void);
-extern int  zft_fetch_segment_fraction(const unsigned int segment,
-				       void *buffer,
-				       const ft_read_mode_t read_mode,
-				       const unsigned int start,
-				       const unsigned int size);
-#define zft_fetch_segment(segment, address, read_mode)		\
-	zft_fetch_segment_fraction(segment, address, read_mode,	\
-				   0, FT_SEGMENT_SIZE)
-/*   hook for the VFS interface
- */
-extern int  _zft_read(char __user *buff, int req_len);
-
-#endif /* _ZFTAPE_READ_H */
diff --git a/drivers/char/ftape/zftape/zftape-rw.c b/drivers/char/ftape/zftape/zftape-rw.c
deleted file mode 100644
index dab634686885..000000000000
--- a/drivers/char/ftape/zftape/zftape-rw.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- *      Copyright (C) 1996, 1997 Claus-Justus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-rw.c,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:08 $
- *
- *      This file contains some common code for the r/w code for
- *      zftape.
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-
-#include <linux/zftape.h>
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-eof.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-write.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-rw.h"
-#include "../zftape/zftape-vtbl.h"
-
-/*      Global vars.
- */
-
-__u8 *zft_deblock_buf;
-__u8 *zft_hseg_buf;
-int zft_deblock_segment = -1;
-zft_status_enum zft_io_state = zft_idle;
-int zft_header_changed;
-int zft_qic113; /* conform to old specs. and old zftape */
-int zft_use_compression;
-zft_position zft_pos = {
-	-1, /* seg_pos */
-	0,  /* seg_byte_pos */
-	0,  /* tape_pos */
-	0   /* volume_pos */
-};
-unsigned int zft_blk_sz = CONFIG_ZFT_DFLT_BLK_SZ;
-__s64 zft_capacity;
-
-unsigned int zft_written_segments;
-int zft_label_changed;
-
-/*      Local vars.
- */
-
-unsigned int zft_get_seg_sz(unsigned int segment)
-{
-	int size;
-	TRACE_FUN(ft_t_any);
-	
-	size = FT_SEGMENT_SIZE - 
-		count_ones(ftape_get_bad_sector_entry(segment))*FT_SECTOR_SIZE;
-	if (size > 0) {
-		TRACE_EXIT (unsigned)size; 
-	} else {
-		TRACE_EXIT 0;
-	}
-}
-
-/* ftape_set_flags(). Claus-Justus Heine, 1994/1995
- */
-void zft_set_flags(unsigned minor_unit)
-{     
-	TRACE_FUN(ft_t_flow);
-	
-	zft_use_compression = zft_qic_mode = 0;
-	switch (minor_unit & ZFT_MINOR_OP_MASK) {
-	case (ZFT_Q80_MODE | ZFT_ZIP_MODE):
-	case ZFT_ZIP_MODE:
-		zft_use_compression = 1;
-	case 0:
-	case ZFT_Q80_MODE:
-		zft_qic_mode = 1;
-		if (zft_mt_compression) { /* override the default */
-			zft_use_compression = 1;
-		}
-		break;
-	case ZFT_RAW_MODE:
-		TRACE(ft_t_noise, "switching to raw mode");
-		break;
-	default:
-		TRACE(ft_t_warn, "Warning:\n"
-		      KERN_INFO "Wrong combination of minor device bits.\n"
-		      KERN_INFO "Switching to raw read-only mode.");
-		zft_write_protected = 1;
-		break;
-	}
-	TRACE_EXIT;
-}
-
-/* computes the segment and byte offset inside the segment
- * corresponding to tape_pos.
- *
- * tape_pos gives the offset in bytes from the beginning of the
- * ft_first_data_segment *seg_byte_pos is the offset in the current
- * segment in bytes
- *
- * Of, if this routine was called often one should cache the last data
- * pos it was called with, but actually this is only needed in
- * ftape_seek_block(), that is, almost never.
- */
-int zft_calc_seg_byte_coord(int *seg_byte_pos, __s64 tape_pos)
-{
-	int segment;
-	int seg_sz;
-	TRACE_FUN(ft_t_flow);
-	
-	if (tape_pos == 0) {
-		*seg_byte_pos = 0;
-		segment = ft_first_data_segment;
-	} else {
-		seg_sz = 0;
-		
-		for (segment = ft_first_data_segment; 
-		     ((tape_pos > 0) && (segment <= ft_last_data_segment));
-		     segment++) {
-			seg_sz = zft_get_seg_sz(segment); 
-			tape_pos -= seg_sz;
-		}
-		if(tape_pos >= 0) {
-			/* the case tape_pos > != 0 means that the
-			 * argument tape_pos lies beyond the EOT.
-			 */
-			*seg_byte_pos= 0;
-		} else { /* tape_pos < 0 */
-			segment--;
-			*seg_byte_pos= tape_pos + seg_sz;
-		}
-	}
-	TRACE_EXIT(segment);
-}
-
-/* ftape_calc_tape_pos().
- *
- * computes the offset in bytes from the beginning of the
- * ft_first_data_segment inverse to ftape_calc_seg_byte_coord
- *
- * We should do some caching. But how:
- *
- * Each time the header segments are read in, this routine is called
- * with ft_tracks_per_tape*segments_per_track argumnet. So this should be
- * the time to reset the cache.
- *
- * Also, it might be in the future that the bad sector map gets
- * changed.  -> reset the cache
- */
-static int seg_pos;
-static __s64 tape_pos;
-
-__s64 zft_get_capacity(void)
-{
-	seg_pos  = ft_first_data_segment;
-	tape_pos = 0;
-
-	while (seg_pos <= ft_last_data_segment) {
-		tape_pos += zft_get_seg_sz(seg_pos ++);
-	}
-	return tape_pos;
-}
-
-__s64 zft_calc_tape_pos(int segment)
-{
-	int d1, d2, d3;
-	TRACE_FUN(ft_t_any);
-	
-	if (segment > ft_last_data_segment) {
-	        TRACE_EXIT zft_capacity;
-	}
-	if (segment < ft_first_data_segment) {
-		TRACE_EXIT 0;
-	}
-	d2 = segment - seg_pos;
-	if (-d2 > 10) {
-		d1 = segment - ft_first_data_segment;
-		if (-d2 > d1) {
-			tape_pos = 0;
-			seg_pos = ft_first_data_segment;
-			d2 = d1;
-		}
-	}
-	if (d2 > 10) {
-		d3 = ft_last_data_segment - segment;
-		if (d2 > d3) {
-			tape_pos = zft_capacity;
-			seg_pos  = ft_last_data_segment + 1;
-			d2 = -d3;
-		}
-	}		
-	if (d2 > 0) {
-		while (seg_pos < segment) {
-			tape_pos +=  zft_get_seg_sz(seg_pos++);
-		}
-	} else {
-		while (seg_pos > segment) {
-			tape_pos -=  zft_get_seg_sz(--seg_pos);
-		}
-	}
-	TRACE(ft_t_noise, "new cached pos: %d", seg_pos);
-
-	TRACE_EXIT tape_pos;
-}
-
-/* copy Z-label string to buffer, keeps track of the correct offset in
- * `buffer' 
- */
-void zft_update_label(__u8 *buffer)
-{ 
-	TRACE_FUN(ft_t_flow);
-	
-	if (strncmp(&buffer[FT_LABEL], ZFTAPE_LABEL, 
-		    sizeof(ZFTAPE_LABEL)-1) != 0) {
-		TRACE(ft_t_info, "updating label from \"%s\" to \"%s\"",
-		      &buffer[FT_LABEL], ZFTAPE_LABEL);
-		strcpy(&buffer[FT_LABEL], ZFTAPE_LABEL);
-		memset(&buffer[FT_LABEL] + sizeof(ZFTAPE_LABEL) - 1, ' ', 
-		       FT_LABEL_SZ - sizeof(ZFTAPE_LABEL + 1));
-		PUT4(buffer, FT_LABEL_DATE, 0);
-		zft_label_changed = zft_header_changed = 1; /* changed */
-	}
-	TRACE_EXIT;
-}
-
-int zft_verify_write_segments(unsigned int segment, 
-			      __u8 *data, size_t size,
-			      __u8 *buffer)
-{
-	int result;
-	__u8 *write_buf;
-	__u8 *src_buf;
-	int single;
-	int seg_pos;
-	int seg_sz;
-	int remaining;
-	ft_write_mode_t write_mode;
-	TRACE_FUN(ft_t_flow);
-
-	seg_pos   = segment;
-	seg_sz    = zft_get_seg_sz(seg_pos);
-	src_buf   = data;
-	single    = size <= seg_sz;
-	remaining = size;
-	do {
-		TRACE(ft_t_noise, "\n"
-		      KERN_INFO "remaining: %d\n"
-		      KERN_INFO "seg_sz   : %d\n"
-		      KERN_INFO "segment  : %d",
-		      remaining, seg_sz, seg_pos);
-		if (remaining == seg_sz) {
-			write_buf = src_buf;
-			write_mode = single ? FT_WR_SINGLE : FT_WR_MULTI;
-			remaining = 0;
-		} else if (remaining > seg_sz) {
-			write_buf = src_buf;
-			write_mode = FT_WR_ASYNC; /* don't start tape */
-			remaining -= seg_sz;
-		} else { /* remaining < seg_sz */
-			write_buf = buffer;
-			memcpy(write_buf, src_buf, remaining);
-			memset(&write_buf[remaining],'\0',seg_sz-remaining);
-			write_mode = single ? FT_WR_SINGLE : FT_WR_MULTI;
-			remaining = 0;
-		}
-		if ((result = ftape_write_segment(seg_pos, 
-						  write_buf, 
-						  write_mode)) != seg_sz) {
-			TRACE(ft_t_err, "Error: "
-			      "Couldn't write segment %d", seg_pos);
-			TRACE_EXIT result < 0 ? result : -EIO; /* bail out */
-		}
-		zft_written_segments ++;
-		seg_sz = zft_get_seg_sz(++seg_pos);
-		src_buf += result;
-	} while (remaining > 0);
-	if (ftape_get_status()->fti_state == writing) {
-		TRACE_CATCH(ftape_loop_until_writes_done(),);
-		TRACE_CATCH(ftape_abort_operation(),);
-		zft_prevent_flush();
-	}
-	seg_pos = segment;
-	src_buf = data;
-	remaining = size;
-	do {
-		TRACE_CATCH(result = ftape_read_segment(seg_pos, buffer, 
-							single ? FT_RD_SINGLE
-							: FT_RD_AHEAD),);
-		if (memcmp(src_buf, buffer, 
-			   remaining > result ? result : remaining) != 0) {
-			TRACE_ABORT(-EIO, ft_t_err,
-				    "Failed to verify written segment %d",
-				    seg_pos);
-		}
-		remaining -= result;
-		TRACE(ft_t_noise, "verify successful:\n"
-		      KERN_INFO "segment  : %d\n"
-		      KERN_INFO "segsize  : %d\n"
-		      KERN_INFO "remaining: %d",
-		      seg_pos, result, remaining);
-		src_buf   += seg_sz;
-		seg_pos++;
-	} while (remaining > 0);
-	TRACE_EXIT size;
-}
-
-
-/* zft_erase().  implemented compression-handling
- *
- * calculate the first data-segment when using/not using compression.
- *
- * update header-segment and compression-map-segment.
- */
-int zft_erase(void)
-{
-	int result = 0;
-	TRACE_FUN(ft_t_flow);
-	
-	if (!zft_header_read) {
-		TRACE_CATCH(zft_vmalloc_once((void **)&zft_hseg_buf,
-					     FT_SEGMENT_SIZE),);
-		/* no need to read the vtbl and compression map */
-		TRACE_CATCH(ftape_read_header_segment(zft_hseg_buf),);
-		if ((zft_old_ftape = 
-		     zft_ftape_validate_label(&zft_hseg_buf[FT_LABEL]))) {
-			zft_ftape_extract_file_marks(zft_hseg_buf);
-		}
-		TRACE(ft_t_noise,
-		      "ft_first_data_segment: %d, ft_last_data_segment: %d", 
-		      ft_first_data_segment, ft_last_data_segment);
-		zft_qic113 = (ft_format_code != fmt_normal &&
-			      ft_format_code != fmt_1100ft &&
-			      ft_format_code != fmt_425ft);
-	}
-	if (zft_old_ftape) {
-		zft_clear_ftape_file_marks();
-		zft_old_ftape = 0; /* no longer old ftape */
-	}
-	PUT2(zft_hseg_buf, FT_CMAP_START, 0);
-	zft_volume_table_changed = 1;
-	zft_capacity = zft_get_capacity();
-	zft_init_vtbl();
-	/* the rest must be done in ftape_update_header_segments 
-	 */
-	zft_header_read = 1;
-	zft_header_changed = 1; /* force update of timestamp */
-	result = zft_update_header_segments();
-
-	ftape_abort_operation();
-
-	zft_reset_position(&zft_pos);
-	zft_set_flags (zft_unit);
-	TRACE_EXIT result;
-}
-
-unsigned int zft_get_time(void) 
-{
-	unsigned int date = FT_TIME_STAMP(2097, 11, 30, 23, 59, 59); /* fun */
-	return date;
-}
diff --git a/drivers/char/ftape/zftape/zftape-rw.h b/drivers/char/ftape/zftape/zftape-rw.h
deleted file mode 100644
index 1ceec22b60bd..000000000000
--- a/drivers/char/ftape/zftape/zftape-rw.h
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef _ZFTAPE_RW_H
-#define _ZFTAPE_RW_H
-
-/*
- * Copyright (C) 1996, 1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-rw.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:09 $
- *
- *      This file contains the definitions for the read and write
- *      functions for the QIC-117 floppy-tape driver for Linux.
- *
- */
-
-#include "../zftape/zftape-buffers.h"
-
-#define SEGMENTS_PER_TAPE  (ft_segments_per_track * ft_tracks_per_tape)
-
-/*  QIC-113 Rev. G says that `a maximum of 63488 raw bytes may be
- *  compressed into a single frame'.
- *  Maybe we should stick to 32kb to make it more `beautiful'
- */
-#define ZFT_MAX_BLK_SZ           (62*1024) /* bytes */
-#if !defined(CONFIG_ZFT_DFLT_BLK_SZ)
-# define CONFIG_ZFT_DFLT_BLK_SZ   (10*1024) /* bytes, default of gnu tar */
-#elif CONFIG_ZFT_DFLT_BLK_SZ == 0
-# undef  CONFIG_ZFT_DFLT_BLK_SZ
-# define CONFIG_ZFT_DFLT_BLK_SZ 1
-#elif (CONFIG_ZFT_DFLT_BLK_SZ % 1024) != 0
-# error CONFIG_ZFT_DFLT_BLK_SZ must be 1 or a multiple of 1024
-#endif
-/* The *optional* compression routines need some overhead per tape
- *  block for their purposes. Instead of asking the actual compression
- *  implementation how much it needs, we restrict this overhead to be
- *  maximal of ZFT_CMPT_OVERHEAD size. We need this for EOT
- *  conditions. The tape is assumed to be logical at EOT when the
- *  distance from the physical EOT is less than 
- *  one tape block + ZFT_CMPR_OVERHEAD 
- */
-#define ZFT_CMPR_OVERHEAD 16        /* bytes */
-
-typedef enum
-{ 
-	zft_idle = 0,
-	zft_reading,
-	zft_writing,
-} zft_status_enum;
-
-typedef struct               /*  all values measured in bytes */
-{
-	int   seg_pos;       /*  segment currently positioned at */
-	int   seg_byte_pos;  /*  offset in current segment */ 
-	__s64 tape_pos;      /*  real offset from BOT */
-	__s64 volume_pos;    /*  pos. in uncompressed data stream in
-			      *  current volume 
-			      */
-} zft_position; 
-
-extern zft_position zft_pos;
-extern __u8 *zft_deblock_buf;
-extern __u8 *zft_hseg_buf;
-extern int zft_deblock_segment;
-extern zft_status_enum zft_io_state;
-extern int zft_header_changed;
-extern int zft_qic113; /* conform to old specs. and old zftape */
-extern int zft_use_compression;
-extern unsigned int zft_blk_sz;
-extern __s64 zft_capacity;
-extern unsigned int zft_written_segments;
-extern int zft_label_changed;
-
-/*  zftape-rw.c exported functions
- */
-extern unsigned int zft_get_seg_sz(unsigned int segment);
-extern void  zft_set_flags(unsigned int minor_unit);
-extern int   zft_calc_seg_byte_coord(int *seg_byte_pos, __s64 tape_pos);
-extern __s64 zft_calc_tape_pos(int segment);
-extern __s64 zft_get_capacity(void);
-extern void  zft_update_label(__u8 *buffer);
-extern int   zft_erase(void);
-extern int   zft_verify_write_segments(unsigned int segment, 
-				       __u8 *data, size_t size, __u8 *buffer);
-extern unsigned int zft_get_time(void);
-#endif /* _ZFTAPE_RW_H */
-
diff --git a/drivers/char/ftape/zftape/zftape-vtbl.c b/drivers/char/ftape/zftape/zftape-vtbl.c
deleted file mode 100644
index ad7f8be6340b..000000000000
--- a/drivers/char/ftape/zftape/zftape-vtbl.c
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- *      Copyright (c) 1995-1997 Claus-Justus Heine 
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2, or (at
- your option) any later version.
- 
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- General Public License for more details.
- 
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
- USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-vtbl.c,v $
- * $Revision: 1.7.6.1 $
- * $Date: 1997/11/24 13:48:31 $
- *
- *      This file defines a volume table as defined in various QIC
- *      standards.
- * 
- *      This is a minimal implementation, just allowing ordinary DOS
- *      :( prgrams to identify the cartridge as used.
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <linux/zftape.h>
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-eof.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-write.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-rw.h"
-#include "../zftape/zftape-vtbl.h"
-
-#define ZFT_CMAP_HACK /* leave this defined to hide the compression map */
-
-/*
- *  global variables 
- */
-int zft_qic_mode   = 1; /* use the vtbl */
-int zft_old_ftape; /* prevents old ftaped tapes to be overwritten */
-int zft_volume_table_changed; /* for write_header_segments() */
-
-/*
- *  private variables (only exported for inline functions)
- */
-LIST_HEAD(zft_vtbl);
-
-/*  We could also allocate these dynamically when extracting the volume table
- *  sizeof(zft_volinfo) is about 32 or something close to that
- */
-static zft_volinfo  tape_vtbl;
-static zft_volinfo  eot_vtbl;
-static zft_volinfo *cur_vtbl;
-
-static inline void zft_new_vtbl_entry(void)
-{
-	struct list_head *tmp = &zft_last_vtbl->node;
-	zft_volinfo *new = zft_kmalloc(sizeof(zft_volinfo));
-
-	list_add(&new->node, tmp);
-	new->count = zft_eom_vtbl->count ++;
-}
-
-void zft_free_vtbl(void)
-{
-	for (;;) {
-		struct list_head *tmp = zft_vtbl.prev;
-		zft_volinfo *vtbl;
-
-		if (tmp == &zft_vtbl)
-			break;
-		list_del(tmp);
-		vtbl = list_entry(tmp, zft_volinfo, node);
-		zft_kfree(vtbl, sizeof(zft_volinfo));
-	}
-	INIT_LIST_HEAD(&zft_vtbl);
-	cur_vtbl = NULL;
-}
-
-/*  initialize vtbl, called by ftape_new_cartridge()
- */
-void zft_init_vtbl(void)
-{ 
-	zft_volinfo *new;
-
-	zft_free_vtbl();
-	
-	/*  Create the two dummy vtbl entries
-	 */
-	new = zft_kmalloc(sizeof(zft_volinfo));
-	list_add(&new->node, &zft_vtbl);
-	new = zft_kmalloc(sizeof(zft_volinfo));
-	list_add(&new->node, &zft_vtbl);
-	zft_head_vtbl->end_seg   = ft_first_data_segment;
-	zft_head_vtbl->blk_sz    = zft_blk_sz;
-	zft_head_vtbl->count     = -1;
-	zft_eom_vtbl->start_seg  = ft_first_data_segment + 1;
-	zft_eom_vtbl->end_seg    = ft_last_data_segment + 1;
-	zft_eom_vtbl->blk_sz     = zft_blk_sz;
-	zft_eom_vtbl->count      = 0;
-
-	/*  Reset the pointer for zft_find_volume()
-	 */
-	cur_vtbl = zft_eom_vtbl;
-
-	/* initialize the dummy vtbl entries for zft_qic_mode == 0
-	 */
-	eot_vtbl.start_seg       = ft_last_data_segment + 1;
-	eot_vtbl.end_seg         = ft_last_data_segment + 1;
-	eot_vtbl.blk_sz          = zft_blk_sz;
-	eot_vtbl.count           = -1;
-	tape_vtbl.start_seg = ft_first_data_segment;
-	tape_vtbl.end_seg   = ft_last_data_segment;
-	tape_vtbl.blk_sz    = zft_blk_sz;
-	tape_vtbl.size      = zft_capacity;
-	tape_vtbl.count     = 0;
-}
-
-/* check for a valid VTBL signature. 
- */
-static int vtbl_signature_valid(__u8 signature[4])
-{
-	const char *vtbl_ids[] = VTBL_IDS; /* valid signatures */
-	int j;
-	
-	for (j = 0; 
-	     (j < NR_ITEMS(vtbl_ids)) && (memcmp(signature, vtbl_ids[j], 4) != 0);
-	     j++);
-	return j < NR_ITEMS(vtbl_ids);
-}
-
-/* We used to store the block-size of the volume in the volume-label,
- * using the keyword "blocksize". The blocksize written to the
- * volume-label is in bytes.
- *
- * We use this now only for compatibility with old zftape version. We
- * store the blocksize directly as binary number in the vendor
- * extension part of the volume entry.
- */
-static int check_volume_label(const char *label, int *blk_sz)
-{ 
-	int valid_format;
-	char *blocksize;
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "called with \"%s\" / \"%s\"", label, ZFT_VOL_NAME);
-	if (strncmp(label, ZFT_VOL_NAME, strlen(ZFT_VOL_NAME)) != 0) {
-		*blk_sz = 1; /* smallest block size that we allow */
-		valid_format = 0;
-	} else {
-		TRACE(ft_t_noise, "got old style zftape vtbl entry");
-		/* get the default blocksize */
-		/* use the kernel strstr()   */
-		blocksize= strstr(label, " blocksize ");
-		if (blocksize) {
-			blocksize += strlen(" blocksize ");
-			for(*blk_sz= 0; 
-			    *blocksize >= '0' && *blocksize <= '9'; 
-			    blocksize++) {
-				*blk_sz *= 10;
-				*blk_sz += *blocksize - '0';
-			}
-			if (*blk_sz > ZFT_MAX_BLK_SZ) {
-				*blk_sz= 1;
-				valid_format= 0;
-			} else {
-				valid_format = 1;
-			}
-		} else {
-			*blk_sz= 1;
-			valid_format= 0;
-		}
-	}
-	TRACE_EXIT valid_format;
-}
-
-/*   check for a zftape volume
- */
-static int check_volume(__u8 *entry, zft_volinfo *volume)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	if(strncmp(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG,
-		   strlen(ZFTAPE_SIG)) == 0) {
-		TRACE(ft_t_noise, "got new style zftape vtbl entry");
-		volume->blk_sz = GET2(entry, VTBL_EXT+EXT_ZFTAPE_BLKSZ);
-		volume->qic113 = entry[VTBL_EXT+EXT_ZFTAPE_QIC113];
-		TRACE_EXIT 1;
-	} else {
-		TRACE_EXIT check_volume_label(&entry[VTBL_DESC], &volume->blk_sz);
-	}
-}
-
-
-/* create zftape specific vtbl entry, the volume bounds are inserted
- * in the calling function, zft_create_volume_headers()
- */
-static void create_zft_volume(__u8 *entry, zft_volinfo *vtbl)
-{
-	TRACE_FUN(ft_t_flow);
-
-	memset(entry, 0, VTBL_SIZE);
-	memcpy(&entry[VTBL_SIG], VTBL_ID, 4);
-	sprintf(&entry[VTBL_DESC], ZFT_VOL_NAME" %03d", vtbl->count);
-	entry[VTBL_FLAGS] = (VTBL_FL_NOT_VERIFIED | VTBL_FL_SEG_SPANNING);
-	entry[VTBL_M_NO] = 1; /* multi_cartridge_count */
-	strcpy(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG);
-	PUT2(entry, VTBL_EXT+EXT_ZFTAPE_BLKSZ, vtbl->blk_sz);
-	if (zft_qic113) {
-		PUT8(entry, VTBL_DATA_SIZE, vtbl->size);
-		entry[VTBL_CMPR] = VTBL_CMPR_UNREG; 
-		if (vtbl->use_compression) { /* use compression: */
-			entry[VTBL_CMPR] |= VTBL_CMPR_USED;
-		}
-		entry[VTBL_EXT+EXT_ZFTAPE_QIC113] = 1;
-	} else {
-		PUT4(entry, VTBL_DATA_SIZE, vtbl->size);
-		entry[VTBL_K_CMPR] = VTBL_CMPR_UNREG; 
-		if (vtbl->use_compression) { /* use compression: */
-			entry[VTBL_K_CMPR] |= VTBL_CMPR_USED;
-		}
-	}
-	if (ft_format_code == fmt_big) {
-		/* SCSI like vtbl, store the number of used
-		 * segments as 4 byte value 
-		 */
-		PUT4(entry, VTBL_SCSI_SEGS, vtbl->end_seg-vtbl->start_seg + 1);
-	} else {
-		/* normal, QIC-80MC like vtbl 
-		 */
-		PUT2(entry, VTBL_START, vtbl->start_seg);
-		PUT2(entry, VTBL_END, vtbl->end_seg);
-	}
-	TRACE_EXIT;
-}
-
-/* this one creates the volume headers for each volume. It is assumed
- * that buffer already contains the old volume-table, so that vtbl
- * entries without the zft_volume flag set can savely be ignored.
- */
-static void zft_create_volume_headers(__u8 *buffer)
-{   
-	__u8 *entry;
-	struct list_head *tmp;
-	zft_volinfo *vtbl;
-	TRACE_FUN(ft_t_flow);
-	
-#ifdef ZFT_CMAP_HACK
-	if((strncmp(&buffer[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG,
-		    strlen(ZFTAPE_SIG)) == 0) && 
-	   buffer[VTBL_EXT+EXT_ZFTAPE_CMAP] != 0) {
-		TRACE(ft_t_noise, "deleting cmap volume");
-		memmove(buffer, buffer + VTBL_SIZE,
-			FT_SEGMENT_SIZE - VTBL_SIZE);
-	}
-#endif
-	entry = buffer;
-	for (tmp = zft_head_vtbl->node.next;
-	     tmp != &zft_eom_vtbl->node;
-	     tmp = tmp->next) {
-		vtbl = list_entry(tmp, zft_volinfo, node);
-		/* we now fill in the values only for newly created volumes.
-		 */
-		if (vtbl->new_volume) {
-			create_zft_volume(entry, vtbl);
-			vtbl->new_volume = 0; /* clear the flag */
-		}
-		
-		DUMP_VOLINFO(ft_t_noise, &entry[VTBL_DESC], vtbl);
-		entry += VTBL_SIZE;
-	}
-	memset(entry, 0, FT_SEGMENT_SIZE - zft_eom_vtbl->count * VTBL_SIZE);
-	TRACE_EXIT;
-}
-
-/*  write volume table to tape. Calls zft_create_volume_headers()
- */
-int zft_update_volume_table(unsigned int segment)
-{
-	int result = 0;
-	__u8 *verify_buf = NULL;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE_CATCH(result = ftape_read_segment(ft_first_data_segment, 
-						zft_deblock_buf,
-						FT_RD_SINGLE),);
-	zft_create_volume_headers(zft_deblock_buf);
-	TRACE(ft_t_noise, "writing volume table segment %d", segment);
-	if (zft_vmalloc_once(&verify_buf, FT_SEGMENT_SIZE) == 0) {
-		TRACE_CATCH(zft_verify_write_segments(segment, 
-						      zft_deblock_buf, result,
-						      verify_buf),
-			    zft_vfree(&verify_buf, FT_SEGMENT_SIZE));
-		zft_vfree(&verify_buf, FT_SEGMENT_SIZE);
-	} else {
-		TRACE_CATCH(ftape_write_segment(segment, zft_deblock_buf, 
-						FT_WR_SINGLE),);
-	}
-	TRACE_EXIT 0;
-}
-
-/* non zftape volumes are handled in raw mode. Thus we need to
- * calculate the raw amount of data contained in those segments.  
- */
-static void extract_alien_volume(__u8 *entry, zft_volinfo *vtbl)
-{
-	TRACE_FUN(ft_t_flow);
-
-	vtbl->size  = (zft_calc_tape_pos(zft_last_vtbl->end_seg+1) -
-		       zft_calc_tape_pos(zft_last_vtbl->start_seg));
-	vtbl->use_compression = 0;
-	vtbl->qic113 = zft_qic113;
-	if (vtbl->qic113) {
-		TRACE(ft_t_noise, 
-		      "Fake alien volume's size from " LL_X " to " LL_X, 
-		      LL(GET8(entry, VTBL_DATA_SIZE)), LL(vtbl->size));
-	} else {
-		TRACE(ft_t_noise,
-		      "Fake alien volume's size from %d to " LL_X, 
-		      (int)GET4(entry, VTBL_DATA_SIZE), LL(vtbl->size));
-	}
-	TRACE_EXIT;
-}
-
-
-/* extract an zftape specific volume
- */
-static void extract_zft_volume(__u8 *entry, zft_volinfo *vtbl)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (vtbl->qic113) {
-		vtbl->size = GET8(entry, VTBL_DATA_SIZE);
-		vtbl->use_compression = 
-			(entry[VTBL_CMPR] & VTBL_CMPR_USED) != 0; 
-	} else {
-		vtbl->size = GET4(entry, VTBL_DATA_SIZE);
-		if (entry[VTBL_K_CMPR] & VTBL_CMPR_UNREG) {
-			vtbl->use_compression = 
-				(entry[VTBL_K_CMPR] & VTBL_CMPR_USED) != 0;
-		} else if (entry[VTBL_CMPR] & VTBL_CMPR_UNREG) {
-			vtbl->use_compression = 
-				(entry[VTBL_CMPR] & VTBL_CMPR_USED) != 0; 
-		} else {
-			TRACE(ft_t_warn, "Geeh! There is something wrong:\n"
-			      KERN_INFO "QIC compression (Rev = K): %x\n"
-			      KERN_INFO "QIC compression (Rev > K): %x",
-			      entry[VTBL_K_CMPR], entry[VTBL_CMPR]);
-		}
-	}
-	TRACE_EXIT;
-}
-
-/* extract the volume table from buffer. "buffer" must already contain
- * the vtbl-segment 
- */
-int zft_extract_volume_headers(__u8 *buffer)
-{                            
-        __u8 *entry;
-	TRACE_FUN(ft_t_flow);
-	
-	zft_init_vtbl();
-	entry = buffer;
-#ifdef ZFT_CMAP_HACK
-	if ((strncmp(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG,
-		     strlen(ZFTAPE_SIG)) == 0) &&
-	    entry[VTBL_EXT+EXT_ZFTAPE_CMAP] != 0) {
-		TRACE(ft_t_noise, "ignoring cmap volume");
-		entry += VTBL_SIZE;
-	} 
-#endif
-	/* the end of the vtbl is indicated by an invalid signature 
-	 */
-	while (vtbl_signature_valid(&entry[VTBL_SIG]) &&
-	       (entry - buffer) < FT_SEGMENT_SIZE) {
-		zft_new_vtbl_entry();
-		if (ft_format_code == fmt_big) {
-			/* SCSI like vtbl, stores only the number of
-			 * segments used 
-			 */
-			unsigned int num_segments= GET4(entry, VTBL_SCSI_SEGS);
-			zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg;
-			zft_last_vtbl->end_seg = 
-				zft_last_vtbl->start_seg + num_segments - 1;
-		} else {
-			/* `normal', QIC-80 like vtbl 
-			 */
-			zft_last_vtbl->start_seg = GET2(entry, VTBL_START);
-			zft_last_vtbl->end_seg   = GET2(entry, VTBL_END);
-		}
-		zft_eom_vtbl->start_seg  = zft_last_vtbl->end_seg + 1;
-		/* check if we created this volume and get the
-		 * blk_sz 
-		 */
-		zft_last_vtbl->zft_volume = check_volume(entry, zft_last_vtbl);
-		if (zft_last_vtbl->zft_volume == 0) {
-			extract_alien_volume(entry, zft_last_vtbl);
-		} else {
-			extract_zft_volume(entry, zft_last_vtbl);
-		}
-		DUMP_VOLINFO(ft_t_noise, &entry[VTBL_DESC], zft_last_vtbl);
-		entry +=VTBL_SIZE;
-	}
-#if 0
-/*
- *  undefine to test end of tape handling
- */
-	zft_new_vtbl_entry();
-	zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg;
-	zft_last_vtbl->end_seg   = ft_last_data_segment - 10;
-	zft_last_vtbl->blk_sz          = zft_blk_sz;
-	zft_last_vtbl->zft_volume      = 1;
-	zft_last_vtbl->qic113          = zft_qic113;
-	zft_last_vtbl->size = (zft_calc_tape_pos(zft_last_vtbl->end_seg+1)
-			       - zft_calc_tape_pos(zft_last_vtbl->start_seg));
-#endif
-	TRACE_EXIT 0;
-}
-
-/* this functions translates the failed_sector_log, misused as
- * EOF-marker list, into a virtual volume table. The table mustn't be
- * written to tape, because this would occupy the first data segment,
- * which should be the volume table, but is actually the first segment
- * that is filled with data (when using standard ftape).  We assume,
- * that we get a non-empty failed_sector_log.
- */
-int zft_fake_volume_headers (eof_mark_union *eof_map, int num_failed_sectors)
-{
-	unsigned int segment, sector;
-	int have_eom = 0;
-	int vol_no;
-	TRACE_FUN(ft_t_flow);
-
-	if ((num_failed_sectors >= 2) &&
-	    (GET2(&eof_map[num_failed_sectors - 1].mark.segment, 0) 
-	     == 
-	     GET2(&eof_map[num_failed_sectors - 2].mark.segment, 0) + 1) &&
-	    (GET2(&eof_map[num_failed_sectors - 1].mark.date, 0) == 1)) {
-		/* this should be eom. We keep the remainder of the
-		 * tape as another volume.
-		 */
-		have_eom = 1;
-	}
-	zft_init_vtbl();
-	zft_eom_vtbl->start_seg = ft_first_data_segment;
-	for(vol_no = 0; vol_no < num_failed_sectors - have_eom; vol_no ++) {
-		zft_new_vtbl_entry();
-
-		segment = GET2(&eof_map[vol_no].mark.segment, 0);
-		sector  = GET2(&eof_map[vol_no].mark.date, 0);
-
-		zft_last_vtbl->start_seg  = zft_eom_vtbl->start_seg;
-		zft_last_vtbl->end_seg    = segment;
-		zft_eom_vtbl->start_seg  = segment + 1;
-		zft_last_vtbl->blk_sz     = 1;
-		zft_last_vtbl->size       = 
-			(zft_calc_tape_pos(zft_last_vtbl->end_seg)
-			 - zft_calc_tape_pos(zft_last_vtbl->start_seg)
-			 + (sector-1) * FT_SECTOR_SIZE);
-		TRACE(ft_t_noise, 
-		      "failed sector log: segment: %d, sector: %d", 
-		      segment, sector);
-		DUMP_VOLINFO(ft_t_noise, "Faked volume", zft_last_vtbl);
-	}
-	if (!have_eom) {
-		zft_new_vtbl_entry();
-		zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg;
-		zft_last_vtbl->end_seg   = ft_last_data_segment;
-		zft_eom_vtbl->start_seg  = ft_last_data_segment + 1;
-		zft_last_vtbl->size      = zft_capacity;
-		zft_last_vtbl->size     -= zft_calc_tape_pos(zft_last_vtbl->start_seg);
-		zft_last_vtbl->blk_sz    = 1;
-		DUMP_VOLINFO(ft_t_noise, "Faked volume",zft_last_vtbl);
-	}
-	TRACE_EXIT 0;
-}
-
-/* update the internal volume table
- *
- * if before start of last volume: erase all following volumes if
- * inside a volume: set end of volume to infinity
- *
- * this function is intended to be called every time _ftape_write() is
- * called
- *
- * return: 0 if no new volume was created, 1 if a new volume was
- * created
- *
- * NOTE: we don't need to check for zft_mode as ftape_write() does
- * that already. This function gets never called without accessing
- * zftape via the *qft* devices 
- */
-
-int zft_open_volume(zft_position *pos, int blk_sz, int use_compression)
-{ 
-	TRACE_FUN(ft_t_flow);
-	
-	if (!zft_qic_mode) {
-		TRACE_EXIT 0;
-	}
-	if (zft_tape_at_lbot(pos)) {
-		zft_init_vtbl();
-		if(zft_old_ftape) {
-			/* clear old ftape's eof marks */
-			zft_clear_ftape_file_marks();
-			zft_old_ftape = 0; /* no longer old ftape */
-		}
-		zft_reset_position(pos);
-	}
-	if (pos->seg_pos != zft_last_vtbl->end_seg + 1) {
-		TRACE_ABORT(-EIO, ft_t_bug, 
-		      "BUG: seg_pos: %d, zft_last_vtbl->end_seg: %d", 
-		      pos->seg_pos, zft_last_vtbl->end_seg);
-	}                            
-	TRACE(ft_t_noise, "create new volume");
-	if (zft_eom_vtbl->count >= ZFT_MAX_VOLUMES) {
-		TRACE_ABORT(-ENOSPC, ft_t_err,
-			    "Error: maxmimal number of volumes exhausted "
-			    "(maxmimum is %d)", ZFT_MAX_VOLUMES);
-	}
-	zft_new_vtbl_entry();
-	pos->volume_pos = pos->seg_byte_pos = 0;
-	zft_last_vtbl->start_seg       = pos->seg_pos;
-	zft_last_vtbl->end_seg         = ft_last_data_segment; /* infinity */
-	zft_last_vtbl->blk_sz          = blk_sz;
-	zft_last_vtbl->size            = zft_capacity;
-	zft_last_vtbl->zft_volume      = 1;
-	zft_last_vtbl->use_compression = use_compression;
-	zft_last_vtbl->qic113          = zft_qic113;
-	zft_last_vtbl->new_volume      = 1;
-	zft_last_vtbl->open            = 1;
-	zft_volume_table_changed = 1;
-	zft_eom_vtbl->start_seg  = ft_last_data_segment + 1;
-	TRACE_EXIT 0;
-}
-
-/*  perform mtfsf, mtbsf, not allowed without zft_qic_mode
- */
-int zft_skip_volumes(int count, zft_position *pos)
-{ 
-	const zft_volinfo *vtbl;
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_noise, "count: %d", count);
-	
-	vtbl= zft_find_volume(pos->seg_pos);
-	while (count > 0 && vtbl != zft_eom_vtbl) {
-		vtbl = list_entry(vtbl->node.next, zft_volinfo, node);
-		count --;
-	}
-	while (count < 0 && vtbl != zft_first_vtbl) {
-		vtbl = list_entry(vtbl->node.prev, zft_volinfo, node);
-		count ++;
-	}
-	pos->seg_pos        = vtbl->start_seg;
-	pos->seg_byte_pos   = 0;
-	pos->volume_pos     = 0;
-	pos->tape_pos       = zft_calc_tape_pos(pos->seg_pos);
-	zft_just_before_eof = vtbl->size == 0;
-	if (zft_cmpr_ops) {
-		(*zft_cmpr_ops->reset)();
-	}
-	zft_deblock_segment = -1; /* no need to keep cache */
-	TRACE(ft_t_noise, "repositioning to:\n"
-	      KERN_INFO "zft_seg_pos        : %d\n"
-	      KERN_INFO "zft_seg_byte_pos   : %d\n"
-	      KERN_INFO "zft_tape_pos       : " LL_X "\n"
-	      KERN_INFO "zft_volume_pos     : " LL_X "\n"
-	      KERN_INFO "file number        : %d",
-	      pos->seg_pos, pos->seg_byte_pos, 
-	      LL(pos->tape_pos), LL(pos->volume_pos), vtbl->count);
-	zft_resid = count < 0 ? -count : count;
-	TRACE_EXIT zft_resid ? -EINVAL : 0;
-}
-
-/* the following simply returns the raw data position of the EOM
- * marker, MTIOCSIZE ioctl 
- */
-__s64 zft_get_eom_pos(void)
-{
-	if (zft_qic_mode) {
-		return zft_calc_tape_pos(zft_eom_vtbl->start_seg);
-	} else {
-		/* there is only one volume in raw mode */
-		return zft_capacity;
-	}
-}
-
-/* skip to eom, used for MTEOM
- */
-void zft_skip_to_eom(zft_position *pos)
-{
-	TRACE_FUN(ft_t_flow);
-	pos->seg_pos      = zft_eom_vtbl->start_seg;
-	pos->seg_byte_pos = 
-		pos->volume_pos     = 
-		zft_just_before_eof = 0;
-	pos->tape_pos = zft_calc_tape_pos(pos->seg_pos);
-	TRACE(ft_t_noise, "ftape positioned to segment %d, data pos " LL_X, 
-	      pos->seg_pos, LL(pos->tape_pos));
-	TRACE_EXIT;
-}
-
-/*  write an EOF-marker by setting zft_last_vtbl->end_seg to seg_pos.
- *  NOTE: this function assumes that zft_last_vtbl points to a valid
- *  vtbl entry
- *
- *  NOTE: this routine always positions before the EOF marker
- */
-int zft_close_volume(zft_position *pos)
-{
-	TRACE_FUN(ft_t_any);
-
-	if (zft_vtbl_empty || !zft_last_vtbl->open) { /* should not happen */
-		TRACE(ft_t_noise, "There are no volumes to finish");
-		TRACE_EXIT -EIO;
-	}
-	if (pos->seg_byte_pos == 0 && 
-	    pos->seg_pos != zft_last_vtbl->start_seg) {
-		pos->seg_pos --;
-		pos->seg_byte_pos      = zft_get_seg_sz(pos->seg_pos);
-	}
-	zft_last_vtbl->end_seg   = pos->seg_pos;
-	zft_last_vtbl->size      = pos->volume_pos;
-	zft_volume_table_changed = 1;
-	zft_just_before_eof      = 1;
-	zft_eom_vtbl->start_seg  = zft_last_vtbl->end_seg + 1;
-	zft_last_vtbl->open      = 0; /* closed */
-	TRACE_EXIT 0;
-}
-
-/* write count file-marks at current position. 
- *
- *  The tape is positioned after the eof-marker, that is at byte 0 of
- *  the segment following the eof-marker
- *
- *  this function is only allowed in zft_qic_mode
- *
- *  Only allowed when tape is at BOT or EOD.
- */
-int zft_weof(unsigned int count, zft_position *pos)
-{
-	
-	TRACE_FUN(ft_t_flow);
-
-	if (!count) { /* write zero EOF marks should be a real no-op */
-		TRACE_EXIT 0;
-	}
-	zft_volume_table_changed = 1;
-	if (zft_tape_at_lbot(pos)) {
-		zft_init_vtbl();
-		if(zft_old_ftape) {
-			/* clear old ftape's eof marks */
-			zft_clear_ftape_file_marks();
-			zft_old_ftape = 0;    /* no longer old ftape */
-		}
-	}
-	if (zft_last_vtbl->open) {
-		zft_close_volume(pos);
-		zft_move_past_eof(pos);
-		count --;
-	}
-	/* now it's easy, just append eof-marks, that is empty
-	 * volumes, to the end of the already recorded media.
-	 */
-	while (count > 0 && 
-	       pos->seg_pos <= ft_last_data_segment && 
-	       zft_eom_vtbl->count < ZFT_MAX_VOLUMES) {
-		TRACE(ft_t_noise,
-		      "Writing zero sized file at segment %d", pos->seg_pos);
-		zft_new_vtbl_entry();
-		zft_last_vtbl->start_seg       = pos->seg_pos;
-		zft_last_vtbl->end_seg         = pos->seg_pos;
-		zft_last_vtbl->size            = 0;
-		zft_last_vtbl->blk_sz          = zft_blk_sz;
-		zft_last_vtbl->zft_volume      = 1;
-		zft_last_vtbl->use_compression = 0;
-		pos->tape_pos += zft_get_seg_sz(pos->seg_pos);
-		zft_eom_vtbl->start_seg = ++ pos->seg_pos;
-		count --;
-	} 
-	if (count > 0) {
-		/*  there are two possibilities: end of tape, or the
-		 *  maximum number of files is exhausted.
-		 */
-		zft_resid = count;
-		TRACE(ft_t_noise,"Number of marks NOT written: %d", zft_resid);
-		if (zft_eom_vtbl->count == ZFT_MAX_VOLUMES) {
-			TRACE_ABORT(-EINVAL, ft_t_warn,
-				    "maximum allowed number of files "
-				    "exhausted: %d", ZFT_MAX_VOLUMES);
-		} else {
-			TRACE_ABORT(-ENOSPC,
-				    ft_t_noise, "reached end of tape");
-		}
-	}
-	TRACE_EXIT 0;
-}
-
-const zft_volinfo *zft_find_volume(unsigned int seg_pos)
-{
-	TRACE_FUN(ft_t_flow);
-	
-	TRACE(ft_t_any, "called with seg_pos %d",seg_pos);
-	if (!zft_qic_mode) {
-		if (seg_pos > ft_last_data_segment) {
-			TRACE_EXIT &eot_vtbl;
-		}
-		tape_vtbl.blk_sz =  zft_blk_sz;
-		TRACE_EXIT &tape_vtbl;
-	}
-	if (seg_pos < zft_first_vtbl->start_seg) {
-		TRACE_EXIT (cur_vtbl = zft_first_vtbl);
-	}
-	while (seg_pos > cur_vtbl->end_seg) {
-		cur_vtbl = list_entry(cur_vtbl->node.next, zft_volinfo, node);
-		TRACE(ft_t_noise, "%d - %d", cur_vtbl->start_seg, cur_vtbl->end_seg);
-	}
-	while (seg_pos < cur_vtbl->start_seg) {
-		cur_vtbl = list_entry(cur_vtbl->node.prev, zft_volinfo, node);
-		TRACE(ft_t_noise, "%d - %d", cur_vtbl->start_seg, cur_vtbl->end_seg);
-	}
-	if (seg_pos > cur_vtbl->end_seg || seg_pos < cur_vtbl->start_seg) {
-		TRACE(ft_t_bug, "This cannot happen");
-	}
-	DUMP_VOLINFO(ft_t_noise, "", cur_vtbl);
-	TRACE_EXIT cur_vtbl;
-}
-
-/* this function really assumes that we are just before eof
- */
-void zft_move_past_eof(zft_position *pos)
-{ 
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_noise, "old seg. pos: %d", pos->seg_pos);
-	pos->tape_pos += zft_get_seg_sz(pos->seg_pos++) - pos->seg_byte_pos;
-	pos->seg_byte_pos = 0;
-	pos->volume_pos   = 0;
-	if (zft_cmpr_ops) {
-		(*zft_cmpr_ops->reset)();
-	}
-	zft_just_before_eof =  0;
-	zft_deblock_segment = -1; /* no need to cache it anymore */
-	TRACE(ft_t_noise, "new seg. pos: %d", pos->seg_pos);
-	TRACE_EXIT;
-}
diff --git a/drivers/char/ftape/zftape/zftape-vtbl.h b/drivers/char/ftape/zftape/zftape-vtbl.h
deleted file mode 100644
index f31d196d1759..000000000000
--- a/drivers/char/ftape/zftape/zftape-vtbl.h
+++ /dev/null
@@ -1,227 +0,0 @@
-#ifndef _ZFTAPE_VTBL_H
-#define _ZFTAPE_VTBL_H
-
-/*
- *      Copyright (c) 1995-1997  Claus-Justus Heine
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2, or (at
- your option) any later version.
- 
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- General Public License for more details.
- 
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
- USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-vtbl.h,v $
- * $Revision: 1.3 $
- * $Date: 1997/10/28 14:30:09 $
- *
- *      This file defines a volume table as defined in the QIC-80
- *      development standards.
- */
-
-#include <linux/list.h>
-
-#include "../lowlevel/ftape-tracing.h"
-
-#include "../zftape/zftape-eof.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-rw.h"
-
-#define VTBL_SIZE 128 /* bytes */
-
-/* The following are offsets in the vtbl.  */
-#define VTBL_SIG   0
-#define VTBL_START 4
-#define VTBL_END   6
-#define VTBL_DESC  8
-#define VTBL_DATE  52
-#define VTBL_FLAGS 56
-#define VTBL_FL_VENDOR_SPECIFIC (1<<0)
-#define VTBL_FL_MUTLI_CARTRIDGE (1<<1)
-#define VTBL_FL_NOT_VERIFIED    (1<<2)
-#define VTBL_FL_REDIR_INHIBIT   (1<<3)
-#define VTBL_FL_SEG_SPANNING    (1<<4)
-#define VTBL_FL_DIRECTORY_LAST  (1<<5)
-#define VTBL_FL_RESERVED_6      (1<<6)
-#define VTBL_FL_RESERVED_7      (1<<7)
-#define VTBL_M_NO  57
-#define VTBL_EXT   58
-#define EXT_ZFTAPE_SIG     0
-#define EXT_ZFTAPE_BLKSZ  10
-#define EXT_ZFTAPE_CMAP   12
-#define EXT_ZFTAPE_QIC113 13
-#define VTBL_PWD   84
-#define VTBL_DIR_SIZE 92
-#define VTBL_DATA_SIZE 96
-#define VTBL_OS_VERSION 104
-#define VTBL_SRC_DRIVE  106
-#define VTBL_DEV        122
-#define VTBL_RESERVED_1 123
-#define VTBL_CMPR       124
-#define VTBL_CMPR_UNREG 0x3f
-#define VTBL_CMPR_USED  0x80
-#define VTBL_FMT        125
-#define VTBL_RESERVED_2 126
-#define VTBL_RESERVED_3 127
-/* compatibility with pre revision K */
-#define VTBL_K_CMPR     120 
-
-/*  the next is used by QIC-3020 tapes with format code 6 (>2^16
- *  segments) It is specified in QIC-113, Rev. G, Section 5 (SCSI
- *  volume table). The difference is simply, that we only store the
- *  number of segments used, not the starting segment.
- */
-#define VTBL_SCSI_SEGS  4 /* is a 4 byte value */
-
-/*  one vtbl is 128 bytes, that results in a maximum number of
- *  29*1024/128 = 232 volumes.
- */
-#define ZFT_MAX_VOLUMES (FT_SEGMENT_SIZE/VTBL_SIZE)
-#define VTBL_ID  "VTBL"
-#define VTBL_IDS { VTBL_ID, "XTBL", "UTID", "EXVT" } /* other valid ids */
-#define ZFT_VOL_NAME "zftape volume" /* volume label used by me */
-#define ZFTAPE_SIG "LINUX ZFT"
-
-/*  global variables
- */
-typedef struct zft_internal_vtbl
-{
-	struct list_head node;
-	int          count;
-	unsigned int start_seg;         /* 32 bits are enough for now */
-	unsigned int end_seg;           /* 32 bits are enough for now */
-	__s64        size;              /* uncompressed size */
-        unsigned int blk_sz;            /* block size for this volume */
-	unsigned int zft_volume     :1; /* zftape created this volume */
-	unsigned int use_compression:1; /* compressed volume  */
-	unsigned int qic113         :1; /* layout of compressed block
-					 * info and vtbl conforms to
-					 * QIC-113, Rev. G 
-					 */
-	unsigned int new_volume     :1; /* it was created by us, this
-					 * run.  this allows the
-					 * fields that aren't really
-					 * used by zftape to be filled
-					 * in by some user level
-					 * program.
-					 */
-	unsigned int open           :1; /* just in progress of being 
-					 * written
-					 */
-} zft_volinfo;
-
-extern struct list_head zft_vtbl;
-#define zft_head_vtbl  list_entry(zft_vtbl.next, zft_volinfo, node)
-#define zft_eom_vtbl   list_entry(zft_vtbl.prev, zft_volinfo, node)
-#define zft_last_vtbl  list_entry(zft_eom_vtbl->node.prev, zft_volinfo, node)
-#define zft_first_vtbl list_entry(zft_head_vtbl->node.next, zft_volinfo, node)
-#define zft_vtbl_empty (zft_eom_vtbl->node.prev == &zft_head_vtbl->node)
-
-#define DUMP_VOLINFO(level, desc, info)					\
-{									\
-	char tmp[21];							\
-	strlcpy(tmp, desc, sizeof(tmp));				\
-	TRACE(level, "Volume %d:\n"					\
-	      KERN_INFO "description  : %s\n"				\
-	      KERN_INFO "first segment: %d\n"				\
-	      KERN_INFO "last  segment: %d\n"				\
-	      KERN_INFO "size         : " LL_X "\n"			\
-	      KERN_INFO "block size   : %d\n"				\
-	      KERN_INFO "compression  : %d\n"				\
-	      KERN_INFO "zftape volume: %d\n"				\
-	      KERN_INFO "QIC-113 conf.: %d",				\
-	      (info)->count, tmp, (info)->start_seg, (info)->end_seg,	\
-	      LL((info)->size), (info)->blk_sz,				\
-	      (info)->use_compression != 0, (info)->zft_volume != 0,	\
-	      (info)->qic113 != 0);					\
-}
-
-extern int zft_qic_mode;
-extern int zft_old_ftape;
-extern int zft_volume_table_changed;
-
-/* exported functions */
-extern void  zft_init_vtbl             (void);
-extern void  zft_free_vtbl             (void);
-extern int   zft_extract_volume_headers(__u8 *buffer);
-extern int   zft_update_volume_table   (unsigned int segment);
-extern int   zft_open_volume           (zft_position *pos,
-					int blk_sz, int use_compression);
-extern int   zft_close_volume          (zft_position *pos);
-extern const zft_volinfo *zft_find_volume(unsigned int seg_pos);
-extern int   zft_skip_volumes          (int count, zft_position *pos);
-extern __s64 zft_get_eom_pos           (void);
-extern void  zft_skip_to_eom           (zft_position *pos);
-extern int   zft_fake_volume_headers   (eof_mark_union *eof_map, 
-					int num_failed_sectors);
-extern int   zft_weof                  (unsigned int count, zft_position *pos);
-extern void  zft_move_past_eof         (zft_position *pos);
-
-static inline int   zft_tape_at_eod         (const zft_position *pos);
-static inline int   zft_tape_at_lbot        (const zft_position *pos);
-static inline void  zft_position_before_eof (zft_position *pos, 
-					     const zft_volinfo *volume);
-static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
-				      const zft_position *pos);
-
-/* this function decrements the zft_seg_pos counter if we are right
- * at the beginning of a segment. This is to handle fsfm/bsfm -- we
- * need to position before the eof mark.  NOTE: zft_tape_pos is not
- * changed 
- */
-static inline void zft_position_before_eof(zft_position *pos, 
-					   const zft_volinfo *volume)
-{ 
-	TRACE_FUN(ft_t_flow);
-
-	if (pos->seg_pos == volume->end_seg + 1 &&  pos->seg_byte_pos == 0) {
-		pos->seg_pos --;
-		pos->seg_byte_pos = zft_get_seg_sz(pos->seg_pos);
-	}
-	TRACE_EXIT;
-}
-
-/*  Mmmh. Is the position at the end of the last volume, that is right
- *  before the last EOF mark also logical an EOD condition?
- */
-static inline int zft_tape_at_eod(const zft_position *pos)
-{ 
-	TRACE_FUN(ft_t_any);
-
-	if (zft_qic_mode) {
-		TRACE_EXIT (pos->seg_pos >= zft_eom_vtbl->start_seg ||
-			    zft_last_vtbl->open);
-	} else {
-		TRACE_EXIT pos->seg_pos > ft_last_data_segment;
-	}
-}
-
-static inline int zft_tape_at_lbot(const zft_position *pos)
-{
-	if (zft_qic_mode) {
-		return (pos->seg_pos <= zft_first_vtbl->start_seg &&
-			pos->volume_pos == 0);
-	} else {
-		return (pos->seg_pos <= ft_first_data_segment && 
-			pos->volume_pos == 0);
-	}
-}
-
-/* This one checks for EOF.  return remaing space (may be negative) 
- */
-static inline __s64 zft_check_for_eof(const zft_volinfo *vtbl,
-				      const zft_position *pos)
-{     
-	return (__s64)(vtbl->size - pos->volume_pos);
-}
-
-#endif /* _ZFTAPE_VTBL_H */
diff --git a/drivers/char/ftape/zftape/zftape-write.c b/drivers/char/ftape/zftape/zftape-write.c
deleted file mode 100644
index 94327b8c97b9..000000000000
--- a/drivers/char/ftape/zftape/zftape-write.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- *      Copyright (C) 1996, 1997 Claus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-write.c,v $
- * $Revision: 1.3 $
- * $Date: 1997/11/06 00:50:29 $
- *
- *      This file contains the writing code
- *      for the QIC-117 floppy-tape driver for Linux.
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-
-#include <linux/zftape.h>
-
-#include <asm/uaccess.h>
-
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-eof.h"
-#include "../zftape/zftape-ctl.h"
-#include "../zftape/zftape-write.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-rw.h"
-#include "../zftape/zftape-vtbl.h"
-
-/*      Global vars.
- */
-
-/*      Local vars.
- */
-static int last_write_failed;
-static int need_flush;
-
-void zft_prevent_flush(void)
-{
-	need_flush = 0;
-}
-
-static int zft_write_header_segments(__u8* buffer)
-{
-	int header_1_ok = 0;
-	int header_2_ok = 0;
-	unsigned int time_stamp;
-	TRACE_FUN(ft_t_noise);
-	
-	TRACE_CATCH(ftape_abort_operation(),);
-	ftape_seek_to_bot();    /* prevents extra rewind */
-	if (GET4(buffer, 0) != FT_HSEG_MAGIC) {
-		TRACE_ABORT(-EIO, ft_t_err,
-			    "wrong header signature found, aborting");
-	} 
-	/*   Be optimistic: */
-	PUT4(buffer, FT_SEG_CNT,
-	     zft_written_segments + GET4(buffer, FT_SEG_CNT) + 2);
-	if ((time_stamp = zft_get_time()) != 0) {
-		PUT4(buffer, FT_WR_DATE, time_stamp);
-		if (zft_label_changed) {
-			PUT4(buffer, FT_LABEL_DATE, time_stamp);
-		}
-	}
-	TRACE(ft_t_noise,
-	      "writing first header segment %d", ft_header_segment_1);
-	header_1_ok = zft_verify_write_segments(ft_header_segment_1, 
-						buffer, FT_SEGMENT_SIZE,
-						zft_deblock_buf) >= 0;
-	TRACE(ft_t_noise,
-	      "writing second header segment %d", ft_header_segment_2);
-	header_2_ok = zft_verify_write_segments(ft_header_segment_2, 
-						buffer, FT_SEGMENT_SIZE,
-						zft_deblock_buf) >= 0;
-	if (!header_1_ok) {
-		TRACE(ft_t_warn, "Warning: "
-		      "update of first header segment failed");
-	}
-	if (!header_2_ok) {
-		TRACE(ft_t_warn, "Warning: "
-		      "update of second header segment failed");
-	}
-	if (!header_1_ok && !header_2_ok) {
-		TRACE_ABORT(-EIO, ft_t_err, "Error: "
-		      "update of both header segments failed.");
-	}
-	TRACE_EXIT 0;
-}
-
-int zft_update_header_segments(void)
-{
-	TRACE_FUN(ft_t_noise);
-	
-	/*  must NOT use zft_write_protected, as it also includes the
-	 *  file access mode. But we also want to update when soft
-	 *  write protection is enabled (O_RDONLY)
-	 */
-	if (ft_write_protected || zft_old_ftape) {
-		TRACE_ABORT(0, ft_t_noise, "Tape set read-only: no update");
-	} 
-	if (!zft_header_read) {
-		TRACE_ABORT(0, ft_t_noise, "Nothing to update");
-	}
-	if (!zft_header_changed) {
-		zft_header_changed = zft_written_segments > 0;
-	}
-	if (!zft_header_changed && !zft_volume_table_changed) {
-		TRACE_ABORT(0, ft_t_noise, "Nothing to update");
-	}
-	TRACE(ft_t_noise, "Updating header segments");
-	if (ftape_get_status()->fti_state == writing) {
-		TRACE_CATCH(ftape_loop_until_writes_done(),);
-	}
-	TRACE_CATCH(ftape_abort_operation(),);
-	
-	zft_deblock_segment = -1; /* invalidate the cache */
-	if (zft_header_changed) {
-		TRACE_CATCH(zft_write_header_segments(zft_hseg_buf),);
-	}
-	if (zft_volume_table_changed) {
-		TRACE_CATCH(zft_update_volume_table(ft_first_data_segment),);
-	}
-	zft_header_changed =
-		zft_volume_table_changed = 
-		zft_label_changed        =
-		zft_written_segments     = 0;
-	TRACE_CATCH(ftape_abort_operation(),);
-	ftape_seek_to_bot();
-	TRACE_EXIT 0;
-}
-
-static int read_merge_buffer(int seg_pos, __u8 *buffer, int offset, int seg_sz)
-{
-	int result = 0;
-	const ft_trace_t old_tracing = TRACE_LEVEL;
-	TRACE_FUN(ft_t_flow);
-	
-	if (zft_qic_mode) {
-		/*  writing in the middle of a volume is NOT allowed
-		 *
-		 */
-		TRACE(ft_t_noise, "No need to read a segment");
-		memset(buffer + offset, 0, seg_sz - offset);
-		TRACE_EXIT 0;
-	}
-	TRACE(ft_t_any, "waiting");
-	ftape_start_writing(FT_WR_MULTI);
-	TRACE_CATCH(ftape_loop_until_writes_done(),);
-	
-	TRACE(ft_t_noise, "trying to read segment %d from offset %d",
-	      seg_pos, offset);
-	SET_TRACE_LEVEL(ft_t_bug);
-	result = zft_fetch_segment_fraction(seg_pos, buffer, 
-					    FT_RD_SINGLE,
-					    offset, seg_sz - offset);
-	SET_TRACE_LEVEL(old_tracing);
-	if (result != (seg_sz - offset)) {
-		TRACE(ft_t_noise, "Ignore error: read_segment() result: %d",
-		      result);
-		memset(buffer + offset, 0, seg_sz - offset);
-	}
-	TRACE_EXIT 0;
-}
-
-/* flush the write buffer to tape and write an eof-marker at the
- * current position if not in raw mode.  This function always
- * positions the tape before the eof-marker.  _ftape_close() should
- * then advance to the next segment.
- *
- * the parameter "finish_volume" describes whether to position before
- * or after the possibly created file-mark. We always position after
- * the file-mark when called from ftape_close() and a flush was needed
- * (that is ftape_write() was the last tape operation before calling
- * ftape_flush) But we always position before the file-mark when this
- * function get's called from outside ftape_close() 
- */
-int zft_flush_buffers(void)
-{
-	int result;
-	int data_remaining;
-	int this_segs_size;
-	TRACE_FUN(ft_t_flow);
-
-	TRACE(ft_t_data_flow,
-	      "entered, ftape_state = %d", ftape_get_status()->fti_state);
-	if (ftape_get_status()->fti_state != writing && !need_flush) {
-		TRACE_ABORT(0, ft_t_noise, "no need for flush");
-	}
-	zft_io_state = zft_idle; /*  triggers some initializations for the
-				  *  read and write routines 
-				  */
-	if (last_write_failed) {
-		ftape_abort_operation();
-		TRACE_EXIT -EIO;
-	}
-	TRACE(ft_t_noise, "flushing write buffers");
-	this_segs_size = zft_get_seg_sz(zft_pos.seg_pos);
-	if (this_segs_size == zft_pos.seg_byte_pos) {
-		zft_pos.seg_pos ++;
-		data_remaining = zft_pos.seg_byte_pos = 0;
-	} else {
-		data_remaining = zft_pos.seg_byte_pos;
-	}
-	/* If there is any data not written to tape yet, append zero's
-	 * up to the end of the sector (if using compression) or merge
-	 * it with the data existing on the tape Then write the
-	 * segment(s) to tape.
-	 */
-	TRACE(ft_t_noise, "Position:\n"
-	      KERN_INFO "seg_pos  : %d\n"
-	      KERN_INFO "byte pos : %d\n"
-	      KERN_INFO "remaining: %d",
-	      zft_pos.seg_pos, zft_pos.seg_byte_pos, data_remaining);
-	if (data_remaining > 0) {
-		do {
-			this_segs_size = zft_get_seg_sz(zft_pos.seg_pos);
-			if (this_segs_size > data_remaining) {
-				TRACE_CATCH(read_merge_buffer(zft_pos.seg_pos,
-							      zft_deblock_buf,
-							      data_remaining,
-							      this_segs_size),
-					    last_write_failed = 1);
-			}
-			result = ftape_write_segment(zft_pos.seg_pos, 
-						     zft_deblock_buf,
-						     FT_WR_MULTI);
-			if (result != this_segs_size) {
-				TRACE(ft_t_err, "flush buffers failed");
-				zft_pos.tape_pos    -= zft_pos.seg_byte_pos;
-				zft_pos.seg_byte_pos = 0;
-
-				last_write_failed = 1;
-				TRACE_EXIT result;
-			}
-			zft_written_segments ++;
-			TRACE(ft_t_data_flow,
-			      "flush, moved out buffer: %d", result);
-			/* need next segment for more data (empty segments?)
-			 */
-			if (result < data_remaining) { 
-				if (result > 0) {       
-					/* move remainder to buffer beginning 
-					 */
-					memmove(zft_deblock_buf, 
-						zft_deblock_buf + result,
-						FT_SEGMENT_SIZE - result);
-				}
-			} 
-			data_remaining -= result;
-			zft_pos.seg_pos ++;
-		} while (data_remaining > 0);
-		TRACE(ft_t_any, "result: %d", result);
-		zft_deblock_segment = --zft_pos.seg_pos;
-		if (data_remaining == 0) {  /* first byte next segment */
-			zft_pos.seg_byte_pos = this_segs_size;
-		} else { /* after data previous segment, data_remaining < 0 */
-			zft_pos.seg_byte_pos = data_remaining + result;
-		}
-	} else {
-		TRACE(ft_t_noise, "zft_deblock_buf empty");
-		zft_pos.seg_pos --;
-		zft_pos.seg_byte_pos = zft_get_seg_sz (zft_pos.seg_pos);
-		ftape_start_writing(FT_WR_MULTI);
-	}
-	TRACE(ft_t_any, "waiting");
-	if ((result = ftape_loop_until_writes_done()) < 0) {
-		/* that's really bad. What to to with zft_tape_pos? 
-		 */
-		TRACE(ft_t_err, "flush buffers failed");
-	}
-	TRACE(ft_t_any, "zft_seg_pos: %d, zft_seg_byte_pos: %d",
-	      zft_pos.seg_pos, zft_pos.seg_byte_pos);
-	last_write_failed  =
-		need_flush = 0;
-	TRACE_EXIT result;
-}
-
-/* return-value: the number of bytes removed from the user-buffer
- *
- * out: 
- *      int *write_cnt: how much actually has been moved to the
- *                      zft_deblock_buf
- *      int req_len  : MUST NOT BE CHANGED, except at EOT, in 
- *                      which case it may be adjusted
- * in : 
- *      char *buff        : the user buffer
- *      int buf_pos_write : copy of buf_len_wr int
- *      this_segs_size    : the size in bytes of the actual segment
- *                          char
- *      *zft_deblock_buf   : zft_deblock_buf
- */
-static int zft_simple_write(int *cnt,
-			    __u8 *dst_buf, const int seg_sz,
-			    const __u8 __user *src_buf, const int req_len, 
-			    const zft_position *pos,const zft_volinfo *volume)
-{
-	int space_left;
-	TRACE_FUN(ft_t_flow);
-
-	/* volume->size holds the tape capacity while volume is open */
-	if (pos->tape_pos + volume->blk_sz > volume->size) {
-		TRACE_EXIT -ENOSPC;
-	}
-	/*  remaining space in this segment, NOT zft_deblock_buf
-	 */
-	space_left = seg_sz - pos->seg_byte_pos;
-	*cnt = req_len < space_left ? req_len : space_left;
-	if (copy_from_user(dst_buf + pos->seg_byte_pos, src_buf, *cnt) != 0) {
-		TRACE_EXIT -EFAULT;
-	}
-	TRACE_EXIT *cnt;
-}
-
-static int check_write_access(int req_len,
-			      const zft_volinfo **volume,
-			      zft_position *pos,
-			      const unsigned int blk_sz)
-{
-	int result;
-	TRACE_FUN(ft_t_flow);
-
-	if ((req_len % zft_blk_sz) != 0) {
-		TRACE_ABORT(-EINVAL, ft_t_info,
-			    "write-count %d must be multiple of block-size %d",
-			    req_len, blk_sz);
-	}
-	if (zft_io_state == zft_writing) {
-		/*  all other error conditions have been checked earlier
-		 */
-		TRACE_EXIT 0;
-	}
-	zft_io_state = zft_idle;
-	TRACE_CATCH(zft_check_write_access(pos),);
-	/*  If we haven't read the header segment yet, do it now.
-	 *  This will verify the configuration, get the bad sector
-	 *  table and read the volume table segment 
-	 */
-	if (!zft_header_read) {
-		TRACE_CATCH(zft_read_header_segments(),);
-	}
-	/*  fine. Now the tape is either at BOT or at EOD,
-	 *  Write start of volume now
-	 */
-	TRACE_CATCH(zft_open_volume(pos, blk_sz, zft_use_compression),);
-	*volume = zft_find_volume(pos->seg_pos);
-	DUMP_VOLINFO(ft_t_noise, "", *volume);
-	zft_just_before_eof = 0;
-	/* now merge with old data if necessary */
-	if (!zft_qic_mode && pos->seg_byte_pos != 0){
-		result = zft_fetch_segment(pos->seg_pos,
-					   zft_deblock_buf,
-					   FT_RD_SINGLE);
-		if (result < 0) {
-			if (result == -EINTR || result == -ENOSPC) {
-				TRACE_EXIT result;
-			}
-			TRACE(ft_t_noise, 
-			      "ftape_read_segment() result: %d. "
-			      "This might be normal when using "
-			      "a newly\nformatted tape", result);
-			memset(zft_deblock_buf, '\0', pos->seg_byte_pos);
-		}
-	}
-	zft_io_state = zft_writing;
-	TRACE_EXIT 0;
-}
-
-static int fill_deblock_buf(__u8 *dst_buf, const int seg_sz,
-			    zft_position *pos, const zft_volinfo *volume,
-			    const char __user *usr_buf, const int req_len)
-{
-	int cnt = 0;
-	int result = 0;
-	TRACE_FUN(ft_t_flow);
-
-	if (seg_sz == 0) {
-		TRACE_ABORT(0, ft_t_data_flow, "empty segment");
-	}
-	TRACE(ft_t_data_flow, "\n"
-	      KERN_INFO "remaining req_len: %d\n"
-	      KERN_INFO "          buf_pos: %d", 
-	      req_len, pos->seg_byte_pos);
-	/* zft_deblock_buf will not contain a valid segment any longer */
-	zft_deblock_segment = -1;
-	if (zft_use_compression) {
-		TRACE_CATCH(zft_cmpr_lock(1 /* try to load */),);
-		TRACE_CATCH(result= (*zft_cmpr_ops->write)(&cnt,
-							   dst_buf, seg_sz,
-							   usr_buf, req_len,
-							   pos, volume),);
-	} else {
-		TRACE_CATCH(result= zft_simple_write(&cnt,
-						     dst_buf, seg_sz,
-						     usr_buf, req_len,
-						     pos, volume),);
-	}
-	pos->volume_pos   += result;
-	pos->seg_byte_pos += cnt;
-	pos->tape_pos     += cnt;
-	TRACE(ft_t_data_flow, "\n"
-	      KERN_INFO "removed from user-buffer : %d bytes.\n"
-	      KERN_INFO "copied to zft_deblock_buf: %d bytes.\n"
-	      KERN_INFO "zft_tape_pos             : " LL_X " bytes.",
-	      result, cnt, LL(pos->tape_pos));
-	TRACE_EXIT result;
-}
-
-
-/*  called by the kernel-interface routine "zft_write()"
- */
-int _zft_write(const char __user *buff, int req_len)
-{
-	int result = 0;
-	int written = 0;
-	int write_cnt;
-	int seg_sz;
-	static const zft_volinfo *volume = NULL;
-	TRACE_FUN(ft_t_flow);
-	
-	zft_resid         = req_len;	
-	last_write_failed = 1; /* reset to 0 when successful */
-	/* check if write is allowed 
-	 */
-	TRACE_CATCH(check_write_access(req_len, &volume,&zft_pos,zft_blk_sz),);
-	while (req_len > 0) {
-		/* Allow us to escape from this loop with a signal !
-		 */
-		FT_SIGNAL_EXIT(_DONT_BLOCK);
-		seg_sz = zft_get_seg_sz(zft_pos.seg_pos);
-		if ((write_cnt = fill_deblock_buf(zft_deblock_buf,
-						  seg_sz,
-						  &zft_pos,
-						  volume,
-						  buff,
-						  req_len)) < 0) {
-			zft_resid -= written;
-			if (write_cnt == -ENOSPC) {
-				/* leave the remainder to flush_buffers()
-				 */
-				TRACE(ft_t_info, "No space left on device");
-				last_write_failed = 0;
-				if (!need_flush) {
-					need_flush = written > 0;
-				}
-				TRACE_EXIT written > 0 ? written : -ENOSPC;
-			} else {
-				TRACE_EXIT result;
-			}
-		}
-		if (zft_pos.seg_byte_pos == seg_sz) {
-			TRACE_CATCH(ftape_write_segment(zft_pos.seg_pos, 
-							zft_deblock_buf,
-							FT_WR_ASYNC),
-				    zft_resid -= written);
-			zft_written_segments ++;
-			zft_pos.seg_byte_pos =  0;
-			zft_deblock_segment  = zft_pos.seg_pos;
-			++zft_pos.seg_pos;
-		}
-		written += write_cnt;
-		buff    += write_cnt;
-		req_len -= write_cnt;
-	} /* while (req_len > 0) */
-	TRACE(ft_t_data_flow, "remaining in blocking buffer: %d",
-	       zft_pos.seg_byte_pos);
-	TRACE(ft_t_data_flow, "just written bytes: %d", written);
-	last_write_failed = 0;
-	zft_resid -= written;
-	need_flush = need_flush || written > 0;
-	TRACE_EXIT written;               /* bytes written */
-}
diff --git a/drivers/char/ftape/zftape/zftape-write.h b/drivers/char/ftape/zftape/zftape-write.h
deleted file mode 100644
index ea887015b493..000000000000
--- a/drivers/char/ftape/zftape/zftape-write.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef _ZFTAPE_WRITE_H
-#define _ZFTAPE_WRITE_H
-
-/*
- * Copyright (C) 1996, 1997 Claus-Justus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-write.h,v $
- * $Revision: 1.2 $
- * $Date: 1997/10/05 19:19:13 $
- *
- *      This file contains the definitions for the write functions
- *      for the zftape driver for Linux.
- *
- */
-
-extern int  zft_flush_buffers(void);
-extern int  zft_update_header_segments(void);
-extern void zft_prevent_flush(void);
-
-/*  hook for the VFS interface 
- */
-extern int _zft_write(const char __user *buff, int req_len);
-#endif /* _ZFTAPE_WRITE_H */
diff --git a/drivers/char/ftape/zftape/zftape_syms.c b/drivers/char/ftape/zftape/zftape_syms.c
deleted file mode 100644
index 2db1401682df..000000000000
--- a/drivers/char/ftape/zftape/zftape_syms.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *      Copyright (C) 1997 Claus-Justus Heine
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape_syms.c,v $
- * $Revision: 1.3 $
- * $Date: 1997/10/05 19:19:14 $
- *
- *      This file contains the symbols that the zftape frontend to 
- *      the ftape floppy tape driver exports 
- */		 
-
-#include <linux/module.h>
-
-#include <linux/zftape.h>
-
-#include "../zftape/zftape-init.h"
-#include "../zftape/zftape-read.h"
-#include "../zftape/zftape-buffers.h"
-#include "../zftape/zftape-ctl.h"
-
-/* zftape-init.c */
-EXPORT_SYMBOL(zft_cmpr_register);
-/* zftape-read.c */
-EXPORT_SYMBOL(zft_fetch_segment_fraction);
-/* zftape-buffers.c */
-EXPORT_SYMBOL(zft_vmalloc_once);
-EXPORT_SYMBOL(zft_vmalloc_always);
-EXPORT_SYMBOL(zft_vfree);