Merge tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "Quite a new features are included this time.

  First off, the Collaborative Processor Performance Control interface
  (version 2) defined by ACPI will now be supported on ARM64 along with
  a cpufreq frontend for CPU performance scaling.

  Second, ACPI gets a new infrastructure for the early probing of IRQ
  chips and clock sources (along the lines of the existing similar
  mechanism for DT).

  Next, the ACPI core and the generic device properties API will now
  support a recently introduced hierarchical properties extension of the
  _DSD (Device Specific Data) ACPI device configuration object.  If the
  ACPI platform firmware uses that extension to organize device
  properties in a hierarchical way, the kernel will automatically handle
  it and make those properties available to device drivers via the
  generic device properties API.

  It also will be possible to build the ACPICA's AML interpreter
  debugger into the kernel now and use that to diagnose AML-related
  problems more efficiently.  In the future, this should make it
  possible to single-step AML execution and do similar things.
  Interesting stuff, although somewhat experimental at this point.

  Finally, the PM core gets a new mechanism that can be used by device
  drivers to distinguish between suspend-to-RAM (based on platform
  firmware support) and suspend-to-idle (or other variants of system
  suspend the platform firmware is not involved in) and possibly
  optimize their device suspend/resume handling accordingly.

  In addition to that, some existing features are re-organized quite
  substantially.

  First, the ACPI-based handling of PCI host bridges on x86 and ia64 is
  unified and the common code goes into the ACPI core (so as to reduce
  code duplication and eliminate non-essential differences between the
  two architectures in that area).

  Second, the Operating Performance Points (OPP) framework is
  reorganized to make the code easier to find and follow.

  Next, the cpufreq core's sysfs interface is reorganized to get rid of
  the "primary CPU" concept for configurations in which the same
  performance scaling settings are shared between multiple CPUs.

  Finally, some interfaces that aren't necessary any more are dropped
  from the generic power domains framework.

  On top of the above we have some minor extensions, cleanups and bug
  fixes in multiple places, as usual.

  Specifics:

   - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).

     The most significant change is to allow the AML debugger to be
     built into the kernel.  On top of that there is an update related
     to the NFIT table (the ACPI persistent memory interface) and a few
     fixes and cleanups.

   - ACPI CPPC2 (Collaborative Processor Performance Control v2) support
     along with a cpufreq frontend (Ashwin Chaugule).

     This can only be enabled on ARM64 at this point.

   - New ACPI infrastructure for the early probing of IRQ chips and
     clock sources (Marc Zyngier).

   - Support for a new hierarchical properties extension of the ACPI
     _DSD (Device Specific Data) device configuration object allowing
     the kernel to handle hierarchical properties (provided by the
     platform firmware this way) automatically and make them available
     to device drivers via the generic device properties interface
     (Rafael Wysocki).

   - Generic device properties API extension to obtain an index of
     certain string value in an array of strings, along the lines of
     of_property_match_string(), but working for all of the supported
     firmware node types, and support for the "dma-names" device
     property based on it (Mika Westerberg).

   - ACPI core fix to parse the MADT (Multiple APIC Description Table)
     entries in the order expected by platform firmware (and mandated by
     the specification) to avoid confusion on systems with more than 255
     logical CPUs (Lukasz Anaczkowski).

   - Consolidation of the ACPI-based handling of PCI host bridges on x86
     and ia64 (Jiang Liu).

   - ACPI core fixes to ensure that the correct IRQ number is used to
     represent the SCI (System Control Interrupt) in the cases when it
     has been re-mapped (Chen Yu).

   - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).

   - ACPI EC driver fixes (Lv Zheng).

   - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
     Kosina, Rami Rosen, Rasmus Villemoes).

   - New mechanism in the PM core allowing drivers to check if the
     platform firmware is going to be involved in the upcoming system
     suspend or if it has been involved in the suspend the system is
     resuming from at the moment (Rafael Wysocki).

     This should allow drivers to optimize their suspend/resume handling
     in some cases and the changes include a couple of users of it (the
     i8042 input driver, PCI PM).

   - PCI PM fix to prevent runtime-suspended devices with PME enabled
     from being resumed during system suspend even if they aren't
     configured to wake up the system from sleep (Rafael Wysocki).

   - New mechanism to report the number of a wakeup IRQ that woke up the
     system from sleep last time (Alexandra Yates).

   - Removal of unused interfaces from the generic power domains
     framework and fixes related to latency measurements in that code
     (Ulf Hansson, Daniel Lezcano).

   - cpufreq core sysfs interface rework to make it handle CPUs that
     share performance scaling settings (represented by a common cpufreq
     policy object) more symmetrically (Viresh Kumar).

     This should help to simplify the CPU offline/online handling among
     other things.

   - cpufreq core fixes and cleanups (Viresh Kumar).

   - intel_pstate fixes related to the Turbo Activation Ratio (TAR)
     mechanism on client platforms which causes the turbo P-states range
     to vary depending on platform firmware settings (Srinivas
     Pandruvada).

   - intel_pstate sysfs interface fix (Prarit Bhargava).

   - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
     and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
     Bhat, Luis de Bethencourt).

   - cpuidle mvebu driver cleanups (Russell King).

   - OPP (Operating Performance Points) framework code reorganization to
     make it more maintainable (Viresh Kumar).

   - Intel Broxton support for the RAPL (Running Average Power Limits)
     power capping driver (Amy Wiles).

   - Assorted power management code fixes and cleanups (Dan Carpenter,
     Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
     Villemoes)"

* tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits)
  cpufreq: postfix policy directory with the first CPU in related_cpus
  cpufreq: create cpu/cpufreq/policyX directories
  cpufreq: remove cpufreq_sysfs_{create|remove}_file()
  cpufreq: create cpu/cpufreq at boot time
  cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask
  cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate()
  PM / Domains: Merge measurements for PM QoS device latencies
  PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
  PM / clk: Fix broken build due to non-matching code and header #ifdefs
  ACPI / Documentation: add copy_dsdt to ACPI format options
  ACPI / sysfs: correctly check failing memory allocation
  ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405
  ACPI / CPPC: Fix potential memory leak
  ACPI / CPPC: signedness bug in register_pcc_channel()
  ACPI / PAD: power_saving_thread() is not freezable
  ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle
  ACPI: Using correct irq when waiting for events
  ACPI: Use correct IRQ when uninstalling ACPI interrupt handler
  cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
  cpuidle: mvebu: clean up multiple platform drivers
  ...

11 files changed, 631 insertions, 653 deletions

diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index f94a6ccfe787..5998c53280f5 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
 obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
-obj-$(CONFIG_PM_OPP)	+= opp.o
+obj-$(CONFIG_PM_OPP)	+= opp/
 obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o
 obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 652b5a367c1f..fd0973b922a7 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -17,7 +17,7 @@
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_CLK
 
 enum pce_status {
 	PCE_STATUS_NONE = 0,
@@ -404,7 +404,7 @@ int pm_clk_runtime_resume(struct device *dev)
 	return pm_generic_runtime_resume(dev);
 }
 
-#else /* !CONFIG_PM */
+#else /* !CONFIG_PM_CLK */
 
 /**
  * enable_clock - Enable a device clock.
@@ -484,7 +484,7 @@ static int pm_clk_notify(struct notifier_block *nb,
 	return 0;
 }
 
-#endif /* !CONFIG_PM */
+#endif /* !CONFIG_PM_CLK */
 
 /**
  * pm_clk_add_notifier - Add bus type notifier for power management clocks.
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 16550c63d611..a7dfdf9f15ba 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -34,43 +34,9 @@
 	__ret;							\
 })
 
-#define GENPD_DEV_TIMED_CALLBACK(genpd, type, callback, dev, field, name)	\
-({										\
-	ktime_t __start = ktime_get();						\
-	type __retval = GENPD_DEV_CALLBACK(genpd, type, callback, dev);		\
-	s64 __elapsed = ktime_to_ns(ktime_sub(ktime_get(), __start));		\
-	struct gpd_timing_data *__td = &dev_gpd_data(dev)->td;			\
-	if (!__retval && __elapsed > __td->field) {				\
-		__td->field = __elapsed;					\
-		dev_dbg(dev, name " latency exceeded, new value %lld ns\n",	\
-			__elapsed);						\
-		genpd->max_off_time_changed = true;				\
-		__td->constraint_changed = true;				\
-	}									\
-	__retval;								\
-})
-
 static LIST_HEAD(gpd_list);
 static DEFINE_MUTEX(gpd_list_lock);
 
-static struct generic_pm_domain *pm_genpd_lookup_name(const char *domain_name)
-{
-	struct generic_pm_domain *genpd = NULL, *gpd;
-
-	if (IS_ERR_OR_NULL(domain_name))
-		return NULL;
-
-	mutex_lock(&gpd_list_lock);
-	list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
-		if (!strcmp(gpd->name, domain_name)) {
-			genpd = gpd;
-			break;
-		}
-	}
-	mutex_unlock(&gpd_list_lock);
-	return genpd;
-}
-
 /*
  * Get the generic PM domain for a particular struct device.
  * This validates the struct device pointer, the PM domain pointer,
@@ -110,18 +76,12 @@ static struct generic_pm_domain *dev_to_genpd(struct device *dev)
 
 static int genpd_stop_dev(struct generic_pm_domain *genpd, struct device *dev)
 {
-	return GENPD_DEV_TIMED_CALLBACK(genpd, int, stop, dev,
-					stop_latency_ns, "stop");
+	return GENPD_DEV_CALLBACK(genpd, int, stop, dev);
 }
 
-static int genpd_start_dev(struct generic_pm_domain *genpd, struct device *dev,
-			bool timed)
+static int genpd_start_dev(struct generic_pm_domain *genpd, struct device *dev)
 {
-	if (!timed)
-		return GENPD_DEV_CALLBACK(genpd, int, start, dev);
-
-	return GENPD_DEV_TIMED_CALLBACK(genpd, int, start, dev,
-					start_latency_ns, "start");
+	return GENPD_DEV_CALLBACK(genpd, int, start, dev);
 }
 
 static bool genpd_sd_counter_dec(struct generic_pm_domain *genpd)
@@ -140,19 +100,6 @@ static void genpd_sd_counter_inc(struct generic_pm_domain *genpd)
 	smp_mb__after_atomic();
 }
 
-static void genpd_recalc_cpu_exit_latency(struct generic_pm_domain *genpd)
-{
-	s64 usecs64;
-
-	if (!genpd->cpuidle_data)
-		return;
-
-	usecs64 = genpd->power_on_latency_ns;
-	do_div(usecs64, NSEC_PER_USEC);
-	usecs64 += genpd->cpuidle_data->saved_exit_latency;
-	genpd->cpuidle_data->idle_state->exit_latency = usecs64;
-}
-
 static int genpd_power_on(struct generic_pm_domain *genpd, bool timed)
 {
 	ktime_t time_start;
@@ -176,7 +123,6 @@ static int genpd_power_on(struct generic_pm_domain *genpd, bool timed)
 
 	genpd->power_on_latency_ns = elapsed_ns;
 	genpd->max_off_time_changed = true;
-	genpd_recalc_cpu_exit_latency(genpd);
 	pr_debug("%s: Power-%s latency exceeded, new value %lld ns\n",
 		 genpd->name, "on", elapsed_ns);
 
@@ -213,10 +159,10 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool timed)
 }
 
 /**
- * genpd_queue_power_off_work - Queue up the execution of pm_genpd_poweroff().
+ * genpd_queue_power_off_work - Queue up the execution of genpd_poweroff().
  * @genpd: PM domait to power off.
  *
- * Queue up the execution of pm_genpd_poweroff() unless it's already been done
+ * Queue up the execution of genpd_poweroff() unless it's already been done
  * before.
  */
 static void genpd_queue_power_off_work(struct generic_pm_domain *genpd)
@@ -224,14 +170,16 @@ static void genpd_queue_power_off_work(struct generic_pm_domain *genpd)
 	queue_work(pm_wq, &genpd->power_off_work);
 }
 
+static int genpd_poweron(struct generic_pm_domain *genpd);
+
 /**
- * __pm_genpd_poweron - Restore power to a given PM domain and its masters.
+ * __genpd_poweron - Restore power to a given PM domain and its masters.
  * @genpd: PM domain to power up.
  *
  * Restore power to @genpd and all of its masters so that it is possible to
  * resume a device belonging to it.
  */
-static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
+static int __genpd_poweron(struct generic_pm_domain *genpd)
 {
 	struct gpd_link *link;
 	int ret = 0;
@@ -240,13 +188,6 @@ static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
 	    || (genpd->prepared_count > 0 && genpd->suspend_power_off))
 		return 0;
 
-	if (genpd->cpuidle_data) {
-		cpuidle_pause_and_lock();
-		genpd->cpuidle_data->idle_state->disabled = true;
-		cpuidle_resume_and_unlock();
-		goto out;
-	}
-
 	/*
 	 * The list is guaranteed not to change while the loop below is being
 	 * executed, unless one of the masters' .power_on() callbacks fiddles
@@ -255,7 +196,7 @@ static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
 	list_for_each_entry(link, &genpd->slave_links, slave_node) {
 		genpd_sd_counter_inc(link->master);
 
-		ret = pm_genpd_poweron(link->master);
+		ret = genpd_poweron(link->master);
 		if (ret) {
 			genpd_sd_counter_dec(link->master);
 			goto err;
@@ -266,7 +207,6 @@ static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
 	if (ret)
 		goto err;
 
- out:
 	genpd->status = GPD_STATE_ACTIVE;
 	return 0;
 
@@ -282,46 +222,28 @@ static int __pm_genpd_poweron(struct generic_pm_domain *genpd)
 }
 
 /**
- * pm_genpd_poweron - Restore power to a given PM domain and its masters.
+ * genpd_poweron - Restore power to a given PM domain and its masters.
  * @genpd: PM domain to power up.
  */
-int pm_genpd_poweron(struct generic_pm_domain *genpd)
+static int genpd_poweron(struct generic_pm_domain *genpd)
 {
 	int ret;
 
 	mutex_lock(&genpd->lock);
-	ret = __pm_genpd_poweron(genpd);
+	ret = __genpd_poweron(genpd);
 	mutex_unlock(&genpd->lock);
 	return ret;
 }
 
-/**
- * pm_genpd_name_poweron - Restore power to a given PM domain and its masters.
- * @domain_name: Name of the PM domain to power up.
- */
-int pm_genpd_name_poweron(const char *domain_name)
-{
-	struct generic_pm_domain *genpd;
-
-	genpd = pm_genpd_lookup_name(domain_name);
-	return genpd ? pm_genpd_poweron(genpd) : -EINVAL;
-}
-
 static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev)
 {
-	return GENPD_DEV_TIMED_CALLBACK(genpd, int, save_state, dev,
-					save_state_latency_ns, "state save");
+	return GENPD_DEV_CALLBACK(genpd, int, save_state, dev);
 }
 
 static int genpd_restore_dev(struct generic_pm_domain *genpd,
-			struct device *dev, bool timed)
+			struct device *dev)
 {
-	if (!timed)
-		return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev);
-
-	return GENPD_DEV_TIMED_CALLBACK(genpd, int, restore_state, dev,
-					restore_state_latency_ns,
-					"state restore");
+	return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev);
 }
 
 static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
@@ -365,13 +287,14 @@ static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
 }
 
 /**
- * pm_genpd_poweroff - Remove power from a given PM domain.
+ * genpd_poweroff - Remove power from a given PM domain.
  * @genpd: PM domain to power down.
+ * @is_async: PM domain is powered down from a scheduled work
  *
  * If all of the @genpd's devices have been suspended and all of its subdomains
  * have been powered down, remove power from @genpd.
  */
-static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
+static int genpd_poweroff(struct generic_pm_domain *genpd, bool is_async)
 {
 	struct pm_domain_data *pdd;
 	struct gpd_link *link;
@@ -403,7 +326,7 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
 			not_suspended++;
 	}
 
-	if (not_suspended > genpd->in_progress)
+	if (not_suspended > 1 || (not_suspended == 1 && is_async))
 		return -EBUSY;
 
 	if (genpd->gov && genpd->gov->power_down_ok) {
@@ -411,21 +334,6 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
 			return -EAGAIN;
 	}
 
-	if (genpd->cpuidle_data) {
-		/*
-		 * If cpuidle_data is set, cpuidle should turn the domain off
-		 * when the CPU in it is idle.  In that case we don't decrement
-		 * the subdomain counts of the master domains, so that power is
-		 * not removed from the current domain prematurely as a result
-		 * of cutting off the masters' power.
-		 */
-		genpd->status = GPD_STATE_POWER_OFF;
-		cpuidle_pause_and_lock();
-		genpd->cpuidle_data->idle_state->disabled = false;
-		cpuidle_resume_and_unlock();
-		return 0;
-	}
-
 	if (genpd->power_off) {
 		int ret;
 
@@ -434,10 +342,10 @@ static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
 
 		/*
 		 * If sd_count > 0 at this point, one of the subdomains hasn't
-		 * managed to call pm_genpd_poweron() for the master yet after
-		 * incrementing it.  In that case pm_genpd_poweron() will wait
+		 * managed to call genpd_poweron() for the master yet after
+		 * incrementing it.  In that case genpd_poweron() will wait
 		 * for us to drop the lock, so we can call .power_off() and let
-		 * the pm_genpd_poweron() restore power for us (this shouldn't
+		 * the genpd_poweron() restore power for us (this shouldn't
 		 * happen very often).
 		 */
 		ret = genpd_power_off(genpd, true);
@@ -466,7 +374,7 @@ static void genpd_power_off_work_fn(struct work_struct *work)
 	genpd = container_of(work, struct generic_pm_domain, power_off_work);
 
 	mutex_lock(&genpd->lock);
-	pm_genpd_poweroff(genpd);
+	genpd_poweroff(genpd, true);
 	mutex_unlock(&genpd->lock);
 }
 
@@ -482,6 +390,9 @@ static int pm_genpd_runtime_suspend(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
 	bool (*stop_ok)(struct device *__dev);
+	struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
+	ktime_t time_start;
+	s64 elapsed_ns;
 	int ret;
 
 	dev_dbg(dev, "%s()\n", __func__);
@@ -494,16 +405,29 @@ static int pm_genpd_runtime_suspend(struct device *dev)
 	if (stop_ok && !stop_ok(dev))
 		return -EBUSY;
 
+	/* Measure suspend latency. */
+	time_start = ktime_get();
+
 	ret = genpd_save_dev(genpd, dev);
 	if (ret)
 		return ret;
 
 	ret = genpd_stop_dev(genpd, dev);
 	if (ret) {
-		genpd_restore_dev(genpd, dev, true);
+		genpd_restore_dev(genpd, dev);
 		return ret;
 	}
 
+	/* Update suspend latency value if the measured time exceeds it. */
+	elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
+	if (elapsed_ns > td->suspend_latency_ns) {
+		td->suspend_latency_ns = elapsed_ns;
+		dev_dbg(dev, "suspend latency exceeded, %lld ns\n",
+			elapsed_ns);
+		genpd->max_off_time_changed = true;
+		td->constraint_changed = true;
+	}
+
 	/*
 	 * If power.irq_safe is set, this routine will be run with interrupts
 	 * off, so it can't use mutexes.
@@ -512,9 +436,7 @@ static int pm_genpd_runtime_suspend(struct device *dev)
 		return 0;
 
 	mutex_lock(&genpd->lock);
-	genpd->in_progress++;
-	pm_genpd_poweroff(genpd);
-	genpd->in_progress--;
+	genpd_poweroff(genpd, false);
 	mutex_unlock(&genpd->lock);
 
 	return 0;
@@ -531,6 +453,9 @@ static int pm_genpd_runtime_suspend(struct device *dev)
 static int pm_genpd_runtime_resume(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
+	struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
+	ktime_t time_start;
+	s64 elapsed_ns;
 	int ret;
 	bool timed = true;
 
@@ -547,15 +472,31 @@ static int pm_genpd_runtime_resume(struct device *dev)
 	}
 
 	mutex_lock(&genpd->lock);
-	ret = __pm_genpd_poweron(genpd);
+	ret = __genpd_poweron(genpd);
 	mutex_unlock(&genpd->lock);
 
 	if (ret)
 		return ret;
 
  out:
-	genpd_start_dev(genpd, dev, timed);
-	genpd_restore_dev(genpd, dev, timed);
+	/* Measure resume latency. */
+	if (timed)
+		time_start = ktime_get();
+
+	genpd_start_dev(genpd, dev);
+	genpd_restore_dev(genpd, dev);
+
+	/* Update resume latency value if the measured time exceeds it. */
+	if (timed) {
+		elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start));
+		if (elapsed_ns > td->resume_latency_ns) {
+			td->resume_latency_ns = elapsed_ns;
+			dev_dbg(dev, "resume latency exceeded, %lld ns\n",
+				elapsed_ns);
+			genpd->max_off_time_changed = true;
+			td->constraint_changed = true;
+		}
+	}
 
 	return 0;
 }
@@ -569,15 +510,15 @@ static int __init pd_ignore_unused_setup(char *__unused)
 __setup("pd_ignore_unused", pd_ignore_unused_setup);
 
 /**
- * pm_genpd_poweroff_unused - Power off all PM domains with no devices in use.
+ * genpd_poweroff_unused - Power off all PM domains with no devices in use.
  */
-void pm_genpd_poweroff_unused(void)
+static int __init genpd_poweroff_unused(void)
 {
 	struct generic_pm_domain *genpd;
 
 	if (pd_ignore_unused) {
 		pr_warn("genpd: Not disabling unused power domains\n");
-		return;
+		return 0;
 	}
 
 	mutex_lock(&gpd_list_lock);
@@ -586,11 +527,7 @@ void pm_genpd_poweroff_unused(void)
 		genpd_queue_power_off_work(genpd);
 
 	mutex_unlock(&gpd_list_lock);
-}
 
-static int __init genpd_poweroff_unused(void)
-{
-	pm_genpd_poweroff_unused();
 	return 0;
 }
 late_initcall(genpd_poweroff_unused);
@@ -764,7 +701,7 @@ static int pm_genpd_prepare(struct device *dev)
 
 	/*
 	 * The PM domain must be in the GPD_STATE_ACTIVE state at this point,
-	 * so pm_genpd_poweron() will return immediately, but if the device
+	 * so genpd_poweron() will return immediately, but if the device
 	 * is suspended (e.g. it's been stopped by genpd_stop_dev()), we need
 	 * to make it operational.
 	 */
@@ -890,7 +827,7 @@ static int pm_genpd_resume_noirq(struct device *dev)
 	pm_genpd_sync_poweron(genpd, true);
 	genpd->suspended_count--;
 
-	return genpd_start_dev(genpd, dev, true);
+	return genpd_start_dev(genpd, dev);
 }
 
 /**
@@ -1018,7 +955,8 @@ static int pm_genpd_thaw_noirq(struct device *dev)
 	if (IS_ERR(genpd))
 		return -EINVAL;
 
-	return genpd->suspend_power_off ? 0 : genpd_start_dev(genpd, dev, true);
+	return genpd->suspend_power_off ?
+		0 : genpd_start_dev(genpd, dev);
 }
 
 /**
@@ -1112,7 +1050,7 @@ static int pm_genpd_restore_noirq(struct device *dev)
 
 	pm_genpd_sync_poweron(genpd, true);
 
-	return genpd_start_dev(genpd, dev, true);
+	return genpd_start_dev(genpd, dev);
 }
 
 /**
@@ -1317,18 +1255,6 @@ int __pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
 }
 
 /**
- * __pm_genpd_name_add_device - Find I/O PM domain and add a device to it.
- * @domain_name: Name of the PM domain to add the device to.
- * @dev: Device to be added.
- * @td: Set of PM QoS timing parameters to attach to the device.
- */
-int __pm_genpd_name_add_device(const char *domain_name, struct device *dev,
-			       struct gpd_timing_data *td)
-{
-	return __pm_genpd_add_device(pm_genpd_lookup_name(domain_name), dev, td);
-}
-
-/**
  * pm_genpd_remove_device - Remove a device from an I/O PM domain.
  * @genpd: PM domain to remove the device from.
  * @dev: Device to be removed.
@@ -1429,35 +1355,6 @@ int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
 }
 
 /**
- * pm_genpd_add_subdomain_names - Add a subdomain to an I/O PM domain.
- * @master_name: Name of the master PM domain to add the subdomain to.
- * @subdomain_name: Name of the subdomain to be added.
- */
-int pm_genpd_add_subdomain_names(const char *master_name,
-				 const char *subdomain_name)
-{
-	struct generic_pm_domain *master = NULL, *subdomain = NULL, *gpd;
-
-	if (IS_ERR_OR_NULL(master_name) || IS_ERR_OR_NULL(subdomain_name))
-		return -EINVAL;
-
-	mutex_lock(&gpd_list_lock);
-	list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
-		if (!master && !strcmp(gpd->name, master_name))
-			master = gpd;
-
-		if (!subdomain && !strcmp(gpd->name, subdomain_name))
-			subdomain = gpd;
-
-		if (master && subdomain)
-			break;
-	}
-	mutex_unlock(&gpd_list_lock);
-
-	return pm_genpd_add_subdomain(master, subdomain);
-}
-
-/**
  * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain.
  * @genpd: Master PM domain to remove the subdomain from.
  * @subdomain: Subdomain to be removed.
@@ -1504,124 +1401,6 @@ out:
 	return ret;
 }
 
-/**
- * pm_genpd_attach_cpuidle - Connect the given PM domain with cpuidle.
- * @genpd: PM domain to be connected with cpuidle.
- * @state: cpuidle state this domain can disable/enable.
- *
- * Make a PM domain behave as though it contained a CPU core, that is, instead
- * of calling its power down routine it will enable the given cpuidle state so
- * that the cpuidle subsystem can power it down (if possible and desirable).
- */
-int pm_genpd_attach_cpuidle(struct generic_pm_domain *genpd, int state)
-{
-	struct cpuidle_driver *cpuidle_drv;
-	struct gpd_cpuidle_data *cpuidle_data;
-	struct cpuidle_state *idle_state;
-	int ret = 0;
-
-	if (IS_ERR_OR_NULL(genpd) || state < 0)
-		return -EINVAL;
-
-	mutex_lock(&genpd->lock);
-
-	if (genpd->cpuidle_data) {
-		ret = -EEXIST;
-		goto out;
-	}
-	cpuidle_data = kzalloc(sizeof(*cpuidle_data), GFP_KERNEL);
-	if (!cpuidle_data) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	cpuidle_drv = cpuidle_driver_ref();
-	if (!cpuidle_drv) {
-		ret = -ENODEV;
-		goto err_drv;
-	}
-	if (cpuidle_drv->state_count <= state) {
-		ret = -EINVAL;
-		goto err;
-	}
-	idle_state = &cpuidle_drv->states[state];
-	if (!idle_state->disabled) {
-		ret = -EAGAIN;
-		goto err;
-	}
-	cpuidle_data->idle_state = idle_state;
-	cpuidle_data->saved_exit_latency = idle_state->exit_latency;
-	genpd->cpuidle_data = cpuidle_data;
-	genpd_recalc_cpu_exit_latency(genpd);
-
- out:
-	mutex_unlock(&genpd->lock);
-	return ret;
-
- err:
-	cpuidle_driver_unref();
-
- err_drv:
-	kfree(cpuidle_data);
-	goto out;
-}
-
-/**
- * pm_genpd_name_attach_cpuidle - Find PM domain and connect cpuidle to it.
- * @name: Name of the domain to connect to cpuidle.
- * @state: cpuidle state this domain can manipulate.
- */
-int pm_genpd_name_attach_cpuidle(const char *name, int state)
-{
-	return pm_genpd_attach_cpuidle(pm_genpd_lookup_name(name), state);
-}
-
-/**
- * pm_genpd_detach_cpuidle - Remove the cpuidle connection from a PM domain.
- * @genpd: PM domain to remove the cpuidle connection from.
- *
- * Remove the cpuidle connection set up by pm_genpd_attach_cpuidle() from the
- * given PM domain.
- */
-int pm_genpd_detach_cpuidle(struct generic_pm_domain *genpd)
-{
-	struct gpd_cpuidle_data *cpuidle_data;
-	struct cpuidle_state *idle_state;
-	int ret = 0;
-
-	if (IS_ERR_OR_NULL(genpd))
-		return -EINVAL;
-
-	mutex_lock(&genpd->lock);
-
-	cpuidle_data = genpd->cpuidle_data;
-	if (!cpuidle_data) {
-		ret = -ENODEV;
-		goto out;
-	}
-	idle_state = cpuidle_data->idle_state;
-	if (!idle_state->disabled) {
-		ret = -EAGAIN;
-		goto out;
-	}
-	idle_state->exit_latency = cpuidle_data->saved_exit_latency;
-	cpuidle_driver_unref();
-	genpd->cpuidle_data = NULL;
-	kfree(cpuidle_data);
-
- out:
-	mutex_unlock(&genpd->lock);
-	return ret;
-}
-
-/**
- * pm_genpd_name_detach_cpuidle - Find PM domain and disconnect cpuidle from it.
- * @name: Name of the domain to disconnect cpuidle from.
- */
-int pm_genpd_name_detach_cpuidle(const char *name)
-{
-	return pm_genpd_detach_cpuidle(pm_genpd_lookup_name(name));
-}
-
 /* Default device callbacks for generic PM domains. */
 
 /**
@@ -1688,7 +1467,6 @@ void pm_genpd_init(struct generic_pm_domain *genpd,
 	mutex_init(&genpd->lock);
 	genpd->gov = gov;
 	INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn);
-	genpd->in_progress = 0;
 	atomic_set(&genpd->sd_count, 0);
 	genpd->status = is_off ? GPD_STATE_POWER_OFF : GPD_STATE_ACTIVE;
 	genpd->device_count = 0;
@@ -2023,7 +1801,7 @@ int genpd_dev_pm_attach(struct device *dev)
 
 	dev->pm_domain->detach = genpd_dev_pm_detach;
 	dev->pm_domain->sync = genpd_dev_pm_sync;
-	ret = pm_genpd_poweron(pd);
+	ret = genpd_poweron(pd);
 
 out:
 	return ret ? -EPROBE_DEFER : 0;
diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c
index 85e17bacc834..e60dd12e23aa 100644
--- a/drivers/base/power/domain_governor.c
+++ b/drivers/base/power/domain_governor.c
@@ -77,10 +77,8 @@ static bool default_stop_ok(struct device *dev)
 				      dev_update_qos_constraint);
 
 	if (constraint_ns > 0) {
-		constraint_ns -= td->save_state_latency_ns +
-				td->stop_latency_ns +
-				td->start_latency_ns +
-				td->restore_state_latency_ns;
+		constraint_ns -= td->suspend_latency_ns +
+				td->resume_latency_ns;
 		if (constraint_ns == 0)
 			return false;
 	}
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index 96a92db83cad..07c3c4a9522d 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -9,6 +9,7 @@
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/export.h>
+#include <linux/suspend.h>
 
 #ifdef CONFIG_PM
 /**
@@ -296,11 +297,27 @@ void pm_generic_complete(struct device *dev)
 
 	if (drv && drv->pm && drv->pm->complete)
 		drv->pm->complete(dev);
+}
 
+/**
+ * pm_complete_with_resume_check - Complete a device power transition.
+ * @dev: Device to handle.
+ *
+ * Complete a device power transition during a system-wide power transition and
+ * optionally schedule a runtime resume of the device if the system resume in
+ * progress has been initated by the platform firmware and the device had its
+ * power.direct_complete flag set.
+ */
+void pm_complete_with_resume_check(struct device *dev)
+{
+	pm_generic_complete(dev);
 	/*
-	 * Let runtime PM try to suspend devices that haven't been in use before
-	 * going into the system-wide sleep state we're resuming from.
+	 * If the device had been runtime-suspended before the system went into
+	 * the sleep state it is going out of and it has never been resumed till
+	 * now, resume it in case the firmware powered it up.
 	 */
-	pm_request_idle(dev);
+	if (dev->power.direct_complete && pm_resume_via_firmware())
+		pm_request_resume(dev);
 }
+EXPORT_SYMBOL_GPL(pm_complete_with_resume_check);
 #endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
new file mode 100644
index 000000000000..33c1e18c41a4
--- /dev/null
+++ b/drivers/base/power/opp/Makefile
@@ -0,0 +1,2 @@
+ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
+obj-y				+= core.o cpu.o
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp/core.c
index 7ae7cd990fbf..d5c1149ff123 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp/core.c
@@ -11,131 +11,14 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/cpu.h>
-#include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/device.h>
-#include <linux/list.h>
-#include <linux/rculist.h>
-#include <linux/rcupdate.h>
-#include <linux/pm_opp.h>
 #include <linux/of.h>
 #include <linux/export.h>
 
-/*
- * Internal data structure organization with the OPP layer library is as
- * follows:
- * dev_opp_list (root)
- *	|- device 1 (represents voltage domain 1)
- *	|	|- opp 1 (availability, freq, voltage)
- *	|	|- opp 2 ..
- *	...	...
- *	|	`- opp n ..
- *	|- device 2 (represents the next voltage domain)
- *	...
- *	`- device m (represents mth voltage domain)
- * device 1, 2.. are represented by dev_opp structure while each opp
- * is represented by the opp structure.
- */
-
-/**
- * struct dev_pm_opp - Generic OPP description structure
- * @node:	opp list node. The nodes are maintained throughout the lifetime
- *		of boot. It is expected only an optimal set of OPPs are
- *		added to the library by the SoC framework.
- *		RCU usage: opp list is traversed with RCU locks. node
- *		modification is possible realtime, hence the modifications
- *		are protected by the dev_opp_list_lock for integrity.
- *		IMPORTANT: the opp nodes should be maintained in increasing
- *		order.
- * @dynamic:	not-created from static DT entries.
- * @available:	true/false - marks if this OPP as available or not
- * @turbo:	true if turbo (boost) OPP
- * @rate:	Frequency in hertz
- * @u_volt:	Target voltage in microvolts corresponding to this OPP
- * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
- * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
- * @u_amp:	Maximum current drawn by the device in microamperes
- * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
- *		frequency from any other OPP's frequency.
- * @dev_opp:	points back to the device_opp struct this opp belongs to
- * @rcu_head:	RCU callback head used for deferred freeing
- * @np:		OPP's device node.
- *
- * This structure stores the OPP information for a given device.
- */
-struct dev_pm_opp {
-	struct list_head node;
-
-	bool available;
-	bool dynamic;
-	bool turbo;
-	unsigned long rate;
-
-	unsigned long u_volt;
-	unsigned long u_volt_min;
-	unsigned long u_volt_max;
-	unsigned long u_amp;
-	unsigned long clock_latency_ns;
-
-	struct device_opp *dev_opp;
-	struct rcu_head rcu_head;
-
-	struct device_node *np;
-};
-
-/**
- * struct device_list_opp - devices managed by 'struct device_opp'
- * @node:	list node
- * @dev:	device to which the struct object belongs
- * @rcu_head:	RCU callback head used for deferred freeing
- *
- * This is an internal data structure maintaining the list of devices that are
- * managed by 'struct device_opp'.
- */
-struct device_list_opp {
-	struct list_head node;
-	const struct device *dev;
-	struct rcu_head rcu_head;
-};
-
-/**
- * struct device_opp - Device opp structure
- * @node:	list node - contains the devices with OPPs that
- *		have been registered. Nodes once added are not modified in this
- *		list.
- *		RCU usage: nodes are not modified in the list of device_opp,
- *		however addition is possible and is secured by dev_opp_list_lock
- * @srcu_head:	notifier head to notify the OPP availability changes.
- * @rcu_head:	RCU callback head used for deferred freeing
- * @dev_list:	list of devices that share these OPPs
- * @opp_list:	list of opps
- * @np:		struct device_node pointer for opp's DT node.
- * @shared_opp: OPP is shared between multiple devices.
- *
- * This is an internal data structure maintaining the link to opps attached to
- * a device. This structure is not meant to be shared to users as it is
- * meant for book keeping and private to OPP library.
- *
- * Because the opp structures can be used from both rcu and srcu readers, we
- * need to wait for the grace period of both of them before freeing any
- * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
- */
-struct device_opp {
-	struct list_head node;
-
-	struct srcu_notifier_head srcu_head;
-	struct rcu_head rcu_head;
-	struct list_head dev_list;
-	struct list_head opp_list;
-
-	struct device_node *np;
-	unsigned long clock_latency_ns_max;
-	bool shared_opp;
-	struct dev_pm_opp *suspend_opp;
-};
+#include "opp.h"
 
 /*
  * The root of the list of all devices. All device_opp structures branch off
@@ -200,7 +83,7 @@ static struct device_opp *_managed_opp(const struct device_node *np)
  * is a RCU protected pointer. This means that device_opp is valid as long
  * as we are under RCU lock.
  */
-static struct device_opp *_find_device_opp(struct device *dev)
+struct device_opp *_find_device_opp(struct device *dev)
 {
 	struct device_opp *dev_opp;
 
@@ -579,8 +462,8 @@ static void _remove_list_dev(struct device_list_opp *list_dev,
 		  _kfree_list_dev_rcu);
 }
 
-static struct device_list_opp *_add_list_dev(const struct device *dev,
-					     struct device_opp *dev_opp)
+struct device_list_opp *_add_list_dev(const struct device *dev,
+				      struct device_opp *dev_opp)
 {
 	struct device_list_opp *list_dev;
 
@@ -828,8 +711,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
  * The opp is made available by default and it can be controlled using
  * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove.
  *
- * NOTE: "dynamic" parameter impacts OPPs added by the of_init_opp_table and
- * freed by of_free_opp_table.
+ * NOTE: "dynamic" parameter impacts OPPs added by the dev_pm_opp_of_add_table
+ * and freed by dev_pm_opp_of_remove_table.
  *
  * Locking: The internal device_opp and opp structures are RCU protected.
  * Hence this function internally uses RCU updater strategy with mutex locks
@@ -1220,7 +1103,8 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
 
 #ifdef CONFIG_OF
 /**
- * of_free_opp_table() - Free OPP table entries created from static DT entries
+ * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
+ *				  entries
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Free OPPs created using static entries present in DT.
@@ -1231,7 +1115,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-void of_free_opp_table(struct device *dev)
+void dev_pm_opp_of_remove_table(struct device *dev)
 {
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *opp, *tmp;
@@ -1266,91 +1150,34 @@ void of_free_opp_table(struct device *dev)
 unlock:
 	mutex_unlock(&dev_opp_list_lock);
 }
-EXPORT_SYMBOL_GPL(of_free_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
 
-void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+/* Returns opp descriptor node for a device, caller must do of_node_put() */
+struct device_node *_of_get_opp_desc_node(struct device *dev)
 {
-	struct device *cpu_dev;
-	int cpu;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		of_free_opp_table(cpu_dev);
-	}
-}
-EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table);
-
-/* Returns opp descriptor node from its phandle. Caller must do of_node_put() */
-static struct device_node *
-_of_get_opp_desc_node_from_prop(struct device *dev, const struct property *prop)
-{
-	struct device_node *opp_np;
-
-	opp_np = of_find_node_by_phandle(be32_to_cpup(prop->value));
-	if (!opp_np) {
-		dev_err(dev, "%s: Prop: %s contains invalid opp desc phandle\n",
-			__func__, prop->name);
-		return ERR_PTR(-EINVAL);
-	}
-
-	return opp_np;
-}
-
-/* Returns opp descriptor node for a device. Caller must do of_node_put() */
-static struct device_node *_of_get_opp_desc_node(struct device *dev)
-{
-	const struct property *prop;
-
-	prop = of_find_property(dev->of_node, "operating-points-v2", NULL);
-	if (!prop)
-		return ERR_PTR(-ENODEV);
-	if (!prop->value)
-		return ERR_PTR(-ENODATA);
-
 	/*
 	 * TODO: Support for multiple OPP tables.
 	 *
 	 * There should be only ONE phandle present in "operating-points-v2"
 	 * property.
 	 */
-	if (prop->length != sizeof(__be32)) {
-		dev_err(dev, "%s: Invalid opp desc phandle\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
 
-	return _of_get_opp_desc_node_from_prop(dev, prop);
+	return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
 }
 
 /* Initializes OPP tables based on new bindings */
-static int _of_init_opp_table_v2(struct device *dev,
-				 const struct property *prop)
+static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
 {
-	struct device_node *opp_np, *np;
+	struct device_node *np;
 	struct device_opp *dev_opp;
 	int ret = 0, count = 0;
 
-	if (!prop->value)
-		return -ENODATA;
-
-	/* Get opp node */
-	opp_np = _of_get_opp_desc_node_from_prop(dev, prop);
-	if (IS_ERR(opp_np))
-		return PTR_ERR(opp_np);
-
 	dev_opp = _managed_opp(opp_np);
 	if (dev_opp) {
 		/* OPPs are already managed */
 		if (!_add_list_dev(dev, dev_opp))
 			ret = -ENOMEM;
-		goto put_opp_np;
+		return ret;
 	}
 
 	/* We have opp-list node now, iterate over it and add OPPs */
@@ -1366,10 +1193,8 @@ static int _of_init_opp_table_v2(struct device *dev,
 	}
 
 	/* There should be one of more OPP defined */
-	if (WARN_ON(!count)) {
-		ret = -ENOENT;
-		goto put_opp_np;
-	}
+	if (WARN_ON(!count))
+		return -ENOENT;
 
 	dev_opp = _find_device_opp(dev);
 	if (WARN_ON(IS_ERR(dev_opp))) {
@@ -1380,19 +1205,16 @@ static int _of_init_opp_table_v2(struct device *dev,
 	dev_opp->np = opp_np;
 	dev_opp->shared_opp = of_property_read_bool(opp_np, "opp-shared");
 
-	of_node_put(opp_np);
 	return 0;
 
 free_table:
-	of_free_opp_table(dev);
-put_opp_np:
-	of_node_put(opp_np);
+	dev_pm_opp_of_remove_table(dev);
 
 	return ret;
 }
 
 /* Initializes OPP tables based on old-deprecated bindings */
-static int _of_init_opp_table_v1(struct device *dev)
+static int _of_add_opp_table_v1(struct device *dev)
 {
 	const struct property *prop;
 	const __be32 *val;
@@ -1429,7 +1251,7 @@ static int _of_init_opp_table_v1(struct device *dev)
 }
 
 /**
- * of_init_opp_table() - Initialize opp table from device tree
+ * dev_pm_opp_of_add_table() - Initialize opp table from device tree
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Register the initial OPP table with the OPP library for given device.
@@ -1451,153 +1273,28 @@ static int _of_init_opp_table_v1(struct device *dev)
  * -ENODATA	when empty 'operating-points' property is found
  * -EINVAL	when invalid entries are found in opp-v2 table
  */
-int of_init_opp_table(struct device *dev)
+int dev_pm_opp_of_add_table(struct device *dev)
 {
-	const struct property *prop;
+	struct device_node *opp_np;
+	int ret;
 
 	/*
 	 * OPPs have two version of bindings now. The older one is deprecated,
 	 * try for the new binding first.
 	 */
-	prop = of_find_property(dev->of_node, "operating-points-v2", NULL);
-	if (!prop) {
+	opp_np = _of_get_opp_desc_node(dev);
+	if (!opp_np) {
 		/*
 		 * Try old-deprecated bindings for backward compatibility with
 		 * older dtbs.
 		 */
-		return _of_init_opp_table_v1(dev);
-	}
-
-	return _of_init_opp_table_v2(dev, prop);
-}
-EXPORT_SYMBOL_GPL(of_init_opp_table);
-
-int of_cpumask_init_opp_table(cpumask_var_t cpumask)
-{
-	struct device *cpu_dev;
-	int cpu, ret = 0;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		ret = of_init_opp_table(cpu_dev);
-		if (ret) {
-			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
-			       __func__, cpu, ret);
-
-			/* Free all other OPPs */
-			of_cpumask_free_opp_table(cpumask);
-			break;
-		}
+		return _of_add_opp_table_v1(dev);
 	}
 
-	return ret;
-}
-EXPORT_SYMBOL_GPL(of_cpumask_init_opp_table);
-
-/* Required only for V1 bindings, as v2 can manage it from DT itself */
-int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
-{
-	struct device_list_opp *list_dev;
-	struct device_opp *dev_opp;
-	struct device *dev;
-	int cpu, ret = 0;
-
-	rcu_read_lock();
-
-	dev_opp = _find_device_opp(cpu_dev);
-	if (IS_ERR(dev_opp)) {
-		ret = -EINVAL;
-		goto out_rcu_read_unlock;
-	}
-
-	for_each_cpu(cpu, cpumask) {
-		if (cpu == cpu_dev->id)
-			continue;
-
-		dev = get_cpu_device(cpu);
-		if (!dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			continue;
-		}
-
-		list_dev = _add_list_dev(dev, dev_opp);
-		if (!list_dev) {
-			dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
-				__func__, cpu);
-			continue;
-		}
-	}
-out_rcu_read_unlock:
-	rcu_read_unlock();
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(set_cpus_sharing_opps);
-
-/*
- * Works only for OPP v2 bindings.
- *
- * cpumask should be already set to mask of cpu_dev->id.
- * Returns -ENOENT if operating-points-v2 bindings aren't supported.
- */
-int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
-{
-	struct device_node *np, *tmp_np;
-	struct device *tcpu_dev;
-	int cpu, ret = 0;
-
-	/* Get OPP descriptor node */
-	np = _of_get_opp_desc_node(cpu_dev);
-	if (IS_ERR(np)) {
-		dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
-			PTR_ERR(np));
-		return -ENOENT;
-	}
-
-	/* OPPs are shared ? */
-	if (!of_property_read_bool(np, "opp-shared"))
-		goto put_cpu_node;
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == cpu_dev->id)
-			continue;
-
-		tcpu_dev = get_cpu_device(cpu);
-		if (!tcpu_dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			ret = -ENODEV;
-			goto put_cpu_node;
-		}
-
-		/* Get OPP descriptor node */
-		tmp_np = _of_get_opp_desc_node(tcpu_dev);
-		if (IS_ERR(tmp_np)) {
-			dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
-				__func__, PTR_ERR(tmp_np));
-			ret = PTR_ERR(tmp_np);
-			goto put_cpu_node;
-		}
-
-		/* CPUs are sharing opp node */
-		if (np == tmp_np)
-			cpumask_set_cpu(cpu, cpumask);
-
-		of_node_put(tmp_np);
-	}
+	ret = _of_add_opp_table_v2(dev, opp_np);
+	of_node_put(opp_np);
 
-put_cpu_node:
-	of_node_put(np);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_get_cpus_sharing_opps);
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
 #endif
diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
new file mode 100644
index 000000000000..7654c5606307
--- /dev/null
+++ b/drivers/base/power/opp/cpu.c
@@ -0,0 +1,267 @@
+/*
+ * Generic OPP helper interface for CPU device
+ *
+ * Copyright (C) 2009-2014 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+#include "opp.h"
+
+#ifdef CONFIG_CPU_FREQ
+
+/**
+ * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
+ * @dev:	device for which we do this operation
+ * @table:	Cpufreq table returned back to caller
+ *
+ * Generate a cpufreq table for a provided device- this assumes that the
+ * opp list is already initialized and ready for usage.
+ *
+ * This function allocates required memory for the cpufreq table. It is
+ * expected that the caller does the required maintenance such as freeing
+ * the table as required.
+ *
+ * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM
+ * if no memory available for the operation (table is not populated), returns 0
+ * if successful and table is populated.
+ *
+ * WARNING: It is  important for the callers to ensure refreshing their copy of
+ * the table if any of the mentioned functions have been invoked in the interim.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Since we just use the regular accessor functions to access the internal data
+ * structures, we use RCU read lock inside this function. As a result, users of
+ * this function DONOT need to use explicit locks for invoking.
+ */
+int dev_pm_opp_init_cpufreq_table(struct device *dev,
+				  struct cpufreq_frequency_table **table)
+{
+	struct dev_pm_opp *opp;
+	struct cpufreq_frequency_table *freq_table = NULL;
+	int i, max_opps, ret = 0;
+	unsigned long rate;
+
+	rcu_read_lock();
+
+	max_opps = dev_pm_opp_get_opp_count(dev);
+	if (max_opps <= 0) {
+		ret = max_opps ? max_opps : -ENODATA;
+		goto out;
+	}
+
+	freq_table = kcalloc((max_opps + 1), sizeof(*freq_table), GFP_ATOMIC);
+	if (!freq_table) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0, rate = 0; i < max_opps; i++, rate++) {
+		/* find next rate */
+		opp = dev_pm_opp_find_freq_ceil(dev, &rate);
+		if (IS_ERR(opp)) {
+			ret = PTR_ERR(opp);
+			goto out;
+		}
+		freq_table[i].driver_data = i;
+		freq_table[i].frequency = rate / 1000;
+
+		/* Is Boost/turbo opp ? */
+		if (dev_pm_opp_is_turbo(opp))
+			freq_table[i].flags = CPUFREQ_BOOST_FREQ;
+	}
+
+	freq_table[i].driver_data = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+
+out:
+	rcu_read_unlock();
+	if (ret)
+		kfree(freq_table);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table);
+
+/**
+ * dev_pm_opp_free_cpufreq_table() - free the cpufreq table
+ * @dev:	device for which we do this operation
+ * @table:	table to free
+ *
+ * Free up the table allocated by dev_pm_opp_init_cpufreq_table
+ */
+void dev_pm_opp_free_cpufreq_table(struct device *dev,
+				   struct cpufreq_frequency_table **table)
+{
+	if (!table)
+		return;
+
+	kfree(*table);
+	*table = NULL;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
+#endif	/* CONFIG_CPU_FREQ */
+
+/* Required only for V1 bindings, as v2 can manage it from DT itself */
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	struct device_list_opp *list_dev;
+	struct device_opp *dev_opp;
+	struct device *dev;
+	int cpu, ret = 0;
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(cpu_dev);
+	if (IS_ERR(dev_opp)) {
+		ret = -EINVAL;
+		goto out_rcu_read_unlock;
+	}
+
+	for_each_cpu(cpu, cpumask) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		dev = get_cpu_device(cpu);
+		if (!dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			continue;
+		}
+
+		list_dev = _add_list_dev(dev, dev_opp);
+		if (!list_dev) {
+			dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
+				__func__, cpu);
+			continue;
+		}
+	}
+out_rcu_read_unlock:
+	rcu_read_unlock();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
+
+#ifdef CONFIG_OF
+void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
+{
+	struct device *cpu_dev;
+	int cpu;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		dev_pm_opp_of_remove_table(cpu_dev);
+	}
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
+
+int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
+{
+	struct device *cpu_dev;
+	int cpu, ret = 0;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		ret = dev_pm_opp_of_add_table(cpu_dev);
+		if (ret) {
+			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
+			       __func__, cpu, ret);
+
+			/* Free all other OPPs */
+			dev_pm_opp_of_cpumask_remove_table(cpumask);
+			break;
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
+
+/*
+ * Works only for OPP v2 bindings.
+ *
+ * cpumask should be already set to mask of cpu_dev->id.
+ * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ */
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	struct device_node *np, *tmp_np;
+	struct device *tcpu_dev;
+	int cpu, ret = 0;
+
+	/* Get OPP descriptor node */
+	np = _of_get_opp_desc_node(cpu_dev);
+	if (!np) {
+		dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
+		return -ENOENT;
+	}
+
+	/* OPPs are shared ? */
+	if (!of_property_read_bool(np, "opp-shared"))
+		goto put_cpu_node;
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		tcpu_dev = get_cpu_device(cpu);
+		if (!tcpu_dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			ret = -ENODEV;
+			goto put_cpu_node;
+		}
+
+		/* Get OPP descriptor node */
+		tmp_np = _of_get_opp_desc_node(tcpu_dev);
+		if (!tmp_np) {
+			dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
+				__func__);
+			ret = -ENOENT;
+			goto put_cpu_node;
+		}
+
+		/* CPUs are sharing opp node */
+		if (np == tmp_np)
+			cpumask_set_cpu(cpu, cpumask);
+
+		of_node_put(tmp_np);
+	}
+
+put_cpu_node:
+	of_node_put(np);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
+#endif
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
new file mode 100644
index 000000000000..dcb38f78dae4
--- /dev/null
+++ b/drivers/base/power/opp/opp.h
@@ -0,0 +1,143 @@
+/*
+ * Generic OPP Interface
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVER_OPP_H__
+#define __DRIVER_OPP_H__
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/pm_opp.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+
+/*
+ * Internal data structure organization with the OPP layer library is as
+ * follows:
+ * dev_opp_list (root)
+ *	|- device 1 (represents voltage domain 1)
+ *	|	|- opp 1 (availability, freq, voltage)
+ *	|	|- opp 2 ..
+ *	...	...
+ *	|	`- opp n ..
+ *	|- device 2 (represents the next voltage domain)
+ *	...
+ *	`- device m (represents mth voltage domain)
+ * device 1, 2.. are represented by dev_opp structure while each opp
+ * is represented by the opp structure.
+ */
+
+/**
+ * struct dev_pm_opp - Generic OPP description structure
+ * @node:	opp list node. The nodes are maintained throughout the lifetime
+ *		of boot. It is expected only an optimal set of OPPs are
+ *		added to the library by the SoC framework.
+ *		RCU usage: opp list is traversed with RCU locks. node
+ *		modification is possible realtime, hence the modifications
+ *		are protected by the dev_opp_list_lock for integrity.
+ *		IMPORTANT: the opp nodes should be maintained in increasing
+ *		order.
+ * @dynamic:	not-created from static DT entries.
+ * @available:	true/false - marks if this OPP as available or not
+ * @turbo:	true if turbo (boost) OPP
+ * @rate:	Frequency in hertz
+ * @u_volt:	Target voltage in microvolts corresponding to this OPP
+ * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
+ * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
+ * @u_amp:	Maximum current drawn by the device in microamperes
+ * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
+ *		frequency from any other OPP's frequency.
+ * @dev_opp:	points back to the device_opp struct this opp belongs to
+ * @rcu_head:	RCU callback head used for deferred freeing
+ * @np:		OPP's device node.
+ *
+ * This structure stores the OPP information for a given device.
+ */
+struct dev_pm_opp {
+	struct list_head node;
+
+	bool available;
+	bool dynamic;
+	bool turbo;
+	unsigned long rate;
+
+	unsigned long u_volt;
+	unsigned long u_volt_min;
+	unsigned long u_volt_max;
+	unsigned long u_amp;
+	unsigned long clock_latency_ns;
+
+	struct device_opp *dev_opp;
+	struct rcu_head rcu_head;
+
+	struct device_node *np;
+};
+
+/**
+ * struct device_list_opp - devices managed by 'struct device_opp'
+ * @node:	list node
+ * @dev:	device to which the struct object belongs
+ * @rcu_head:	RCU callback head used for deferred freeing
+ *
+ * This is an internal data structure maintaining the list of devices that are
+ * managed by 'struct device_opp'.
+ */
+struct device_list_opp {
+	struct list_head node;
+	const struct device *dev;
+	struct rcu_head rcu_head;
+};
+
+/**
+ * struct device_opp - Device opp structure
+ * @node:	list node - contains the devices with OPPs that
+ *		have been registered. Nodes once added are not modified in this
+ *		list.
+ *		RCU usage: nodes are not modified in the list of device_opp,
+ *		however addition is possible and is secured by dev_opp_list_lock
+ * @srcu_head:	notifier head to notify the OPP availability changes.
+ * @rcu_head:	RCU callback head used for deferred freeing
+ * @dev_list:	list of devices that share these OPPs
+ * @opp_list:	list of opps
+ * @np:		struct device_node pointer for opp's DT node.
+ * @shared_opp: OPP is shared between multiple devices.
+ *
+ * This is an internal data structure maintaining the link to opps attached to
+ * a device. This structure is not meant to be shared to users as it is
+ * meant for book keeping and private to OPP library.
+ *
+ * Because the opp structures can be used from both rcu and srcu readers, we
+ * need to wait for the grace period of both of them before freeing any
+ * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
+ */
+struct device_opp {
+	struct list_head node;
+
+	struct srcu_notifier_head srcu_head;
+	struct rcu_head rcu_head;
+	struct list_head dev_list;
+	struct list_head opp_list;
+
+	struct device_node *np;
+	unsigned long clock_latency_ns_max;
+	bool shared_opp;
+	struct dev_pm_opp *suspend_opp;
+};
+
+/* Routines internal to opp core */
+struct device_opp *_find_device_opp(struct device *dev);
+struct device_list_opp *_add_list_dev(const struct device *dev,
+				      struct device_opp *dev_opp);
+struct device_node *_of_get_opp_desc_node(struct device *dev);
+
+#endif		/* __DRIVER_OPP_H__ */
diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c
index 51f15bc15774..a1e0b9ab847a 100644
--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -25,6 +25,9 @@
  */
 bool events_check_enabled __read_mostly;
 
+/* First wakeup IRQ seen by the kernel in the last cycle. */
+unsigned int pm_wakeup_irq __read_mostly;
+
 /* If set and the system is suspending, terminate the suspend. */
 static bool pm_abort_suspend __read_mostly;
 
@@ -91,7 +94,7 @@ struct wakeup_source *wakeup_source_create(const char *name)
 	if (!ws)
 		return NULL;
 
-	wakeup_source_prepare(ws, name ? kstrdup(name, GFP_KERNEL) : NULL);
+	wakeup_source_prepare(ws, name ? kstrdup_const(name, GFP_KERNEL) : NULL);
 	return ws;
 }
 EXPORT_SYMBOL_GPL(wakeup_source_create);
@@ -154,7 +157,7 @@ void wakeup_source_destroy(struct wakeup_source *ws)
 
 	wakeup_source_drop(ws);
 	wakeup_source_record(ws);
-	kfree(ws->name);
+	kfree_const(ws->name);
 	kfree(ws);
 }
 EXPORT_SYMBOL_GPL(wakeup_source_destroy);
@@ -868,6 +871,15 @@ EXPORT_SYMBOL_GPL(pm_system_wakeup);
 void pm_wakeup_clear(void)
 {
 	pm_abort_suspend = false;
+	pm_wakeup_irq = 0;
+}
+
+void pm_system_irq_wakeup(unsigned int irq_number)
+{
+	if (pm_wakeup_irq == 0) {
+		pm_wakeup_irq = irq_number;
+		pm_system_wakeup();
+	}
 }
 
 /**
diff --git a/drivers/base/property.c b/drivers/base/property.c
index 2d75366c61e0..de40623bbd8a 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -134,7 +134,7 @@ bool fwnode_property_present(struct fwnode_handle *fwnode, const char *propname)
 	if (is_of_node(fwnode))
 		return of_property_read_bool(to_of_node(fwnode), propname);
 	else if (is_acpi_node(fwnode))
-		return !acpi_dev_prop_get(to_acpi_node(fwnode), propname, NULL);
+		return !acpi_node_prop_get(fwnode, propname, NULL);
 
 	return !!pset_prop_get(to_pset(fwnode), propname);
 }
@@ -287,6 +287,28 @@ int device_property_read_string(struct device *dev, const char *propname,
 }
 EXPORT_SYMBOL_GPL(device_property_read_string);
 
+/**
+ * device_property_match_string - find a string in an array and return index
+ * @dev: Device to get the property of
+ * @propname: Name of the property holding the array
+ * @string: String to look for
+ *
+ * Find a given string in a string array and if it is found return the
+ * index back.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO if the property is not an array of strings,
+ *	   %-ENXIO if no suitable firmware interface is present.
+ */
+int device_property_match_string(struct device *dev, const char *propname,
+				 const char *string)
+{
+	return fwnode_property_match_string(dev_fwnode(dev), propname, string);
+}
+EXPORT_SYMBOL_GPL(device_property_match_string);
+
 #define OF_DEV_PROP_READ_ARRAY(node, propname, type, val, nval) \
 	(val) ? of_property_read_##type##_array((node), (propname), (val), (nval)) \
 	      : of_property_count_elems_of_size((node), (propname), sizeof(type))
@@ -298,8 +320,8 @@ EXPORT_SYMBOL_GPL(device_property_read_string);
 		_ret_ = OF_DEV_PROP_READ_ARRAY(to_of_node(_fwnode_), _propname_, \
 					       _type_, _val_, _nval_); \
 	else if (is_acpi_node(_fwnode_)) \
-		_ret_ = acpi_dev_prop_read(to_acpi_node(_fwnode_), _propname_, \
-					   _proptype_, _val_, _nval_); \
+		_ret_ = acpi_node_prop_read(_fwnode_, _propname_, _proptype_, \
+					    _val_, _nval_); \
 	else if (is_pset(_fwnode_)) \
 		_ret_ = pset_prop_read_array(to_pset(_fwnode_), _propname_, \
 					     _proptype_, _val_, _nval_); \
@@ -440,8 +462,8 @@ int fwnode_property_read_string_array(struct fwnode_handle *fwnode,
 						      propname, val, nval) :
 			of_property_count_strings(to_of_node(fwnode), propname);
 	else if (is_acpi_node(fwnode))
-		return acpi_dev_prop_read(to_acpi_node(fwnode), propname,
-					  DEV_PROP_STRING, val, nval);
+		return acpi_node_prop_read(fwnode, propname, DEV_PROP_STRING,
+					   val, nval);
 	else if (is_pset(fwnode))
 		return pset_prop_read_array(to_pset(fwnode), propname,
 					    DEV_PROP_STRING, val, nval);
@@ -470,8 +492,8 @@ int fwnode_property_read_string(struct fwnode_handle *fwnode,
 	if (is_of_node(fwnode))
 		return of_property_read_string(to_of_node(fwnode), propname, val);
 	else if (is_acpi_node(fwnode))
-		return acpi_dev_prop_read(to_acpi_node(fwnode), propname,
-					  DEV_PROP_STRING, val, 1);
+		return acpi_node_prop_read(fwnode, propname, DEV_PROP_STRING,
+					   val, 1);
 
 	return pset_prop_read_array(to_pset(fwnode), propname,
 				    DEV_PROP_STRING, val, 1);
@@ -479,6 +501,52 @@ int fwnode_property_read_string(struct fwnode_handle *fwnode,
 EXPORT_SYMBOL_GPL(fwnode_property_read_string);
 
 /**
+ * fwnode_property_match_string - find a string in an array and return index
+ * @fwnode: Firmware node to get the property of
+ * @propname: Name of the property holding the array
+ * @string: String to look for
+ *
+ * Find a given string in a string array and if it is found return the
+ * index back.
+ *
+ * Return: %0 if the property was found (success),
+ *	   %-EINVAL if given arguments are not valid,
+ *	   %-ENODATA if the property does not have a value,
+ *	   %-EPROTO if the property is not an array of strings,
+ *	   %-ENXIO if no suitable firmware interface is present.
+ */
+int fwnode_property_match_string(struct fwnode_handle *fwnode,
+	const char *propname, const char *string)
+{
+	const char **values;
+	int nval, ret, i;
+
+	nval = fwnode_property_read_string_array(fwnode, propname, NULL, 0);
+	if (nval < 0)
+		return nval;
+
+	values = kcalloc(nval, sizeof(*values), GFP_KERNEL);
+	if (!values)
+		return -ENOMEM;
+
+	ret = fwnode_property_read_string_array(fwnode, propname, values, nval);
+	if (ret < 0)
+		goto out;
+
+	ret = -ENODATA;
+	for (i = 0; i < nval; i++) {
+		if (!strcmp(values[i], string)) {
+			ret = i;
+			break;
+		}
+	}
+out:
+	kfree(values);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fwnode_property_match_string);
+
+/**
  * device_get_next_child_node - Return the next child node handle for a device
  * @dev: Device to find the next child node for.
  * @child: Handle to one of the device's child nodes or a null handle.
@@ -493,11 +561,7 @@ struct fwnode_handle *device_get_next_child_node(struct device *dev,
 		if (node)
 			return &node->fwnode;
 	} else if (IS_ENABLED(CONFIG_ACPI)) {
-		struct acpi_device *node;
-
-		node = acpi_get_next_child(dev, to_acpi_node(child));
-		if (node)
-			return acpi_fwnode_handle(node);
+		return acpi_get_next_subnode(dev, child);
 	}
 	return NULL;
 }