diff options
| author | Alan Cox <alan@linux.intel.com> | 2010-09-28 16:19:38 +0400 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2010-10-22 04:21:05 +0400 |
| commit | 60039a5295b3d82a48fe132c699987d2e1408675 (patch) | |
| tree | 38009cc6be6c876dfa0cd1752bd4c82b7d5d0e96 /drivers/ata | |
| parent | b34e90429ce8a23546b6b927d4e151df4c113644 (diff) | |
| download | linux-60039a5295b3d82a48fe132c699987d2e1408675.tar.xz | |
ata: Intel IDE-R support
Intel IDE-R devices are part of the Intel AMT management setup. They don't
have any special configuration registers or settings so the ata_generic
driver will support them fully.
Rather than add a huge table of IDs for each chipset and keep sending in
new ones this patch autodetects them.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/ata_generic.c | 54 |
1 files changed, 53 insertions, 1 deletions
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index cc5f7726bde7..6981f7680a00 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -35,6 +35,7 @@ enum { ATA_GEN_CLASS_MATCH = (1 << 0), ATA_GEN_FORCE_DMA = (1 << 1), + ATA_GEN_INTEL_IDER = (1 << 2), }; /** @@ -109,6 +110,49 @@ static struct ata_port_operations generic_port_ops = { static int all_generic_ide; /* Set to claim all devices */ /** + * is_intel_ider - identify intel IDE-R devices + * @dev: PCI device + * + * Distinguish Intel IDE-R controller devices from other Intel IDE + * devices. IDE-R devices have no timing registers and are in + * most respects virtual. They should be driven by the ata_generic + * driver. + * + * IDE-R devices have PCI offset 0xF8.L as zero, later Intel ATA has + * it non zero. All Intel ATA has 0x40 writable (timing), but it is + * not writable on IDE-R devices (this is guaranteed). + */ + +static int is_intel_ider(struct pci_dev *dev) +{ + /* For Intel IDE the value at 0xF8 is only zero on IDE-R + interfaces */ + u32 r; + u16 t; + + /* Check the manufacturing ID, it will be zero for IDE-R */ + pci_read_config_dword(dev, 0xF8, &r); + /* Not IDE-R: punt so that ata_(old)piix gets it */ + if (r != 0) + return 0; + /* 0xF8 will also be zero on some early Intel IDE devices + but they will have a sane timing register */ + pci_read_config_word(dev, 0x40, &t); + if (t != 0) + return 0; + /* Finally check if the timing register is writable so that + we eliminate any early devices hot-docked in a docking + station */ + pci_write_config_word(dev, 0x40, 1); + pci_read_config_word(dev, 0x40, &t); + if (t) { + pci_write_config_word(dev, 0x40, 0); + return 0; + } + return 1; +} + +/** * ata_generic_init - attach generic IDE * @dev: PCI device found * @id: match entry @@ -134,6 +178,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id if ((id->driver_data & ATA_GEN_CLASS_MATCH) && all_generic_ide == 0) return -ENODEV; + if (id->driver_data & ATA_GEN_INTEL_IDER) + if (!is_intel_ider(dev)) + return -ENODEV; + /* Devices that need care */ if (dev->vendor == PCI_VENDOR_ID_UMC && dev->device == PCI_DEVICE_ID_UMC_UM8886A && @@ -186,7 +234,11 @@ static struct pci_device_id ata_generic[] = { { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3), }, { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5), }, -#endif +#endif + /* Intel, IDE class device */ + { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, + .driver_data = ATA_GEN_INTEL_IDER }, /* Must come last. If you add entries adjust this table appropriately */ { PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL), .driver_data = ATA_GEN_CLASS_MATCH }, |