summaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
authorMark Lord <liml@rtr.ca>2008-04-01 03:33:56 +0400
committerJeff Garzik <jgarzik@redhat.com>2008-04-17 23:44:21 +0400
commite12bef50b7660cf7c19d1cd3eac381b9eff734d7 (patch)
tree58bb601d948f6a1235fd6f402ef7ee62bc1695a1 /drivers/ata
parent83c063dd730cb56bf3fc89b70250ff9a398fec1e (diff)
downloadlinux-e12bef50b7660cf7c19d1cd3eac381b9eff734d7.tar.xz
sata_mv cosmetic fixes
Various cosmetic fixes in preparation for real code changes later on. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/sata_mv.c116
1 files changed, 59 insertions, 57 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 9a89390531b1..ee6ca97c4545 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1,6 +1,7 @@
/*
* sata_mv.c - Marvell SATA support
*
+ * Copyright 2008: Marvell Corporation, all rights reserved.
* Copyright 2005: EMC Corporation, all rights reserved.
* Copyright 2005 Red Hat, Inc. All rights reserved.
*
@@ -61,7 +62,6 @@
*/
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -131,7 +131,7 @@ enum {
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
/* SoC integrated controllers, no PCI interface */
- MV_FLAG_SOC = (1 << 28),
+ MV_FLAG_SOC = (1 << 28),
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
@@ -141,6 +141,7 @@ enum {
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
+ CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */
CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
CRQB_CMD_ADDR_SHIFT = 8,
CRQB_CMD_CS = (0x2 << 11),
@@ -199,7 +200,7 @@ enum {
TWSI_INT = (1 << 24),
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
- HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
+ HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
HC_MAIN_RSVD),
@@ -223,13 +224,18 @@ enum {
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
SATA_FIS_IRQ_CAUSE_OFS = 0x364,
+ LTMODE_OFS = 0x30c,
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
PHY_MODE2 = 0x330,
+ SATA_IFCTL_OFS = 0x344,
+ SATA_IFSTAT_OFS = 0x34c,
+ VENDOR_UNIQUE_FIS_OFS = 0x35c,
+ FIS_CFG_OFS = 0x360,
MV5_PHY_MODE = 0x74,
MV5_LT_MODE = 0x30,
MV5_PHY_CTL = 0x0C,
- SATA_INTERFACE_CTL = 0x050,
+ SATA_INTERFACE_CFG = 0x050,
MV_M2_PREAMP_MASK = 0x7e0,
@@ -240,6 +246,8 @@ enum {
EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */
+ EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
@@ -298,6 +306,7 @@ enum {
EDMA_ERR_LNK_DATA_RX |
EDMA_ERR_LNK_DATA_TX |
EDMA_ERR_TRANS_PROTO,
+
EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
EDMA_ERR_PRD_PAR |
EDMA_ERR_DEV_DCON |
@@ -344,7 +353,6 @@ enum {
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
- MV_PP_FLAG_HAD_A_RESET = (1 << 2), /* 1st hard reset complete? */
};
#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
@@ -506,11 +514,11 @@ static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
void __iomem *mmio);
static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
-static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
- void __iomem *port_mmio, int want_ncq);
-static int __mv_stop_dma(struct ata_port *ap);
+static int mv_stop_edma(struct ata_port *ap);
+static int mv_stop_edma_engine(struct ata_port *ap);
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
* because we have to allow room for worst case splitting of
@@ -714,6 +722,14 @@ static inline void __iomem *mv_port_base(void __iomem *base, unsigned int port)
(mv_hardport_from_port(port) * MV_PORT_REG_SZ);
}
+static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
+{
+ void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
+ unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
+
+ return hc_mmio + ofs;
+}
+
static inline void __iomem *mv_host_base(struct ata_host *host)
{
struct mv_host_priv *hpriv = host->private_data;
@@ -789,7 +805,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
if (want_ncq != using_ncq)
- __mv_stop_dma(ap);
+ mv_stop_edma_engine(ap);
}
if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
struct mv_host_priv *hpriv = ap->host->private_data;
@@ -810,7 +826,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
hc_mmio + HC_IRQ_CAUSE_OFS);
}
- mv_edma_cfg(pp, hpriv, port_mmio, want_ncq);
+ mv_edma_cfg(ap, want_ncq);
/* clear FIS IRQ Cause */
writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
@@ -824,7 +840,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
}
/**
- * __mv_stop_dma - Disable eDMA engine
+ * mv_stop_edma_engine - Disable eDMA engine
* @ap: ATA channel to manipulate
*
* Verify the local cache of the eDMA state is accurate with a
@@ -833,7 +849,7 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
* LOCKING:
* Inherited from caller.
*/
-static int __mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma_engine(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
struct mv_port_priv *pp = ap->private_data;
@@ -866,13 +882,13 @@ static int __mv_stop_dma(struct ata_port *ap)
return err;
}
-static int mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma(struct ata_port *ap)
{
unsigned long flags;
int rc;
spin_lock_irqsave(&ap->host->lock, flags);
- rc = __mv_stop_dma(ap);
+ rc = mv_stop_edma_engine(ap);
spin_unlock_irqrestore(&ap->host->lock, flags);
return rc;
@@ -1007,10 +1023,12 @@ static void mv6_dev_config(struct ata_device *adev)
adev->max_sectors = ATA_MAX_SECTORS;
}
-static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
- void __iomem *port_mmio, int want_ncq)
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
{
u32 cfg;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = mv_ap_base(ap);
/* set up non-NCQ EDMA configuration */
cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
@@ -1118,7 +1136,7 @@ static int mv_port_start(struct ata_port *ap)
spin_lock_irqsave(&ap->host->lock, flags);
- mv_edma_cfg(pp, hpriv, port_mmio, 0);
+ mv_edma_cfg(ap, 0);
mv_set_edma_ptrs(port_mmio, hpriv, pp);
spin_unlock_irqrestore(&ap->host->lock, flags);
@@ -1145,7 +1163,7 @@ out_port_free_dma_mem:
*/
static void mv_port_stop(struct ata_port *ap)
{
- mv_stop_dma(ap);
+ mv_stop_edma(ap);
mv_port_free_dma_mem(ap);
}
@@ -1315,8 +1333,7 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
(qc->tf.protocol != ATA_PROT_NCQ))
return;
- /* Fill in Gen IIE command request block
- */
+ /* Fill in Gen IIE command request block */
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
@@ -1384,7 +1401,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
* port. Turn off EDMA so there won't be problems accessing
* shadow block, etc registers.
*/
- __mv_stop_dma(ap);
+ mv_stop_edma_engine(ap);
return ata_qc_issue_prot(qc);
}
@@ -1407,10 +1424,10 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
* @reset_allowed: bool: 0 == don't trigger from reset here
*
* In most cases, just clear the interrupt and move on. However,
- * some cases require an eDMA reset, which is done right before
- * the COMRESET in mv_phy_reset(). The SERR case requires a
- * clear of pending errors in the SATA SERROR register. Finally,
- * if the port disabled DMA, update our cached copy to match.
+ * some cases require an eDMA reset, which also performs a COMRESET.
+ * The SERR case requires a clear of pending errors in the SATA
+ * SERROR register. Finally, if the port disabled DMA,
+ * update our cached copy to match.
*
* LOCKING:
* Inherited from caller.
@@ -1648,9 +1665,9 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
pp = ap->private_data;
shift = port << 1; /* (port * 2) */
- if (port >= MV_PORTS_PER_HC) {
+ if (port >= MV_PORTS_PER_HC)
shift++; /* skip bit 8 in the HC Main IRQ reg */
- }
+
have_err_bits = ((PORT0_ERR << shift) & relevant);
if (unlikely(have_err_bits)) {
@@ -1739,6 +1756,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
void __iomem *mmio = hpriv->base;
u32 irq_stat, irq_mask;
+ /* Note to self: &host->lock == &ap->host->lock == ap->lock */
spin_lock(&host->lock);
irq_stat = readl(hpriv->main_cause_reg_addr);
@@ -1772,14 +1790,6 @@ out_unlock:
return IRQ_RETVAL(handled);
}
-static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
-{
- void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
- unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
-
- return hc_mmio + ofs;
-}
-
static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
{
unsigned int ofs;
@@ -1907,7 +1917,7 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- mv_channel_reset(hpriv, mmio, port);
+ mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
writel(0x11f, port_mmio + EDMA_CFG_OFS);
@@ -2125,14 +2135,15 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
m4 = readl(port_mmio + PHY_MODE4);
if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + 0x310);
+ tmp = readl(port_mmio + PHY_MODE3);
+ /* workaround for errata FEr SATA#10 (part 1) */
m4 = (m4 & ~(1 << 1)) | (1 << 0);
writel(m4, port_mmio + PHY_MODE4);
if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + 0x310);
+ writel(tmp, port_mmio + PHY_MODE3);
}
/* Revert values of pre-emphasis and signal amps to the saved ones */
@@ -2182,7 +2193,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- mv_channel_reset(hpriv, mmio, port);
+ mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
writel(0x101f, port_mmio + EDMA_CFG_OFS);
@@ -2239,7 +2250,7 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
return;
}
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no)
{
void __iomem *port_mmio = mv_port_base(mmio, port_no);
@@ -2247,10 +2258,10 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
if (IS_GEN_II(hpriv)) {
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
+ u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
ifctl |= (1 << 7); /* enable gen2i speed */
ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+ writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
}
udelay(25); /* allow reset propagation */
@@ -2372,14 +2383,7 @@ comreset_retry:
static int mv_prereset(struct ata_link *link, unsigned long deadline)
{
- struct ata_port *ap = link->ap;
- struct mv_port_priv *pp = ap->private_data;
-
- mv_stop_dma(ap);
-
- if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET))
- pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
-
+ mv_stop_edma(link->ap);
return 0;
}
@@ -2390,10 +2394,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
struct mv_host_priv *hpriv = ap->host->private_data;
void __iomem *mmio = hpriv->base;
- mv_stop_dma(ap);
-
- mv_channel_reset(hpriv, mmio, ap->port_no);
-
+ mv_stop_edma(ap);
+ mv_reset_channel(hpriv, mmio, ap->port_no);
mv_phy_reset(ap, class, deadline);
return 0;
@@ -2715,10 +2717,10 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
if (IS_GEN_II(hpriv)) {
void __iomem *port_mmio = mv_port_base(mmio, port);
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
+ u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
ifctl |= (1 << 7); /* enable gen2i speed */
ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+ writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
}
hpriv->ops->phy_errata(hpriv, mmio, port);