Merge commit 'v2.6.39' into for-2.6.40/core

Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

7 files changed, 81 insertions, 9 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 39d829cd82dd..71afe0371311 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -150,7 +150,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP |
 				 AHCI_HFLAG_YES_NCQ),
-		.flags		= AHCI_FLAG_COMMON,
+		.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
@@ -261,6 +261,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e02), board_ahci }, /* Panther Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e03), board_ahci }, /* Panther Point AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1e04), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e05), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e06), board_ahci }, /* Panther Point RAID */
+	{ PCI_VDEVICE(INTEL, 0x1e07), board_ahci }, /* Panther Point RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 39865009c251..12c5282e7fca 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -229,6 +229,10 @@ enum {
 	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
 	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
 	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
+	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
+	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
+	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
+	EM_CTL_LED		= (1 << 16), /* LED messages supported */
 
 	/* em message type */
 	EM_MSG_TYPE_LED		= (1 << 0), /* LED */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 0bc3fd6c3fdb..6f6e7718b05c 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -309,6 +309,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (PBG) */
 	{ 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Panther Point) */
+	{ 0x8086, 0x1e09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	{ }	/* terminate list */
 };
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 26d452339e98..d38c40fe4ddb 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -109,6 +109,8 @@ static ssize_t ahci_read_em_buffer(struct device *dev,
 static ssize_t ahci_store_em_buffer(struct device *dev,
 				    struct device_attribute *attr,
 				    const char *buf, size_t size);
+static ssize_t ahci_show_em_supported(struct device *dev,
+				      struct device_attribute *attr, char *buf);
 
 static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
 static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
@@ -116,6 +118,7 @@ static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
 static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
 static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
 		   ahci_read_em_buffer, ahci_store_em_buffer);
+static DEVICE_ATTR(em_message_supported, S_IRUGO, ahci_show_em_supported, NULL);
 
 struct device_attribute *ahci_shost_attrs[] = {
 	&dev_attr_link_power_management_policy,
@@ -126,6 +129,7 @@ struct device_attribute *ahci_shost_attrs[] = {
 	&dev_attr_ahci_host_version,
 	&dev_attr_ahci_port_cmd,
 	&dev_attr_em_buffer,
+	&dev_attr_em_message_supported,
 	NULL
 };
 EXPORT_SYMBOL_GPL(ahci_shost_attrs);
@@ -343,6 +347,24 @@ static ssize_t ahci_store_em_buffer(struct device *dev,
 	return size;
 }
 
+static ssize_t ahci_show_em_supported(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 em_ctl;
+
+	em_ctl = readl(mmio + HOST_EM_CTL);
+
+	return sprintf(buf, "%s%s%s%s\n",
+		       em_ctl & EM_CTL_LED ? "led " : "",
+		       em_ctl & EM_CTL_SAFTE ? "saf-te " : "",
+		       em_ctl & EM_CTL_SES ? "ses-2 " : "",
+		       em_ctl & EM_CTL_SGPIO ? "sgpio " : "");
+}
+
 /**
  *	ahci_save_initial_config - Save and fixup initial config values
  *	@dev: target AHCI device
@@ -1897,7 +1919,17 @@ static void ahci_pmp_attach(struct ata_port *ap)
 	ahci_enable_fbs(ap);
 
 	pp->intr_mask |= PORT_IRQ_BAD_PMP;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+	/*
+	 * We must not change the port interrupt mask register if the
+	 * port is marked frozen, the value in pp->intr_mask will be
+	 * restored later when the port is thawed.
+	 *
+	 * Note that during initialization, the port is marked as
+	 * frozen since the irq handler is not yet registered.
+	 */
+	if (!(ap->pflags & ATA_PFLAG_FROZEN))
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
 }
 
 static void ahci_pmp_detach(struct ata_port *ap)
@@ -1913,7 +1945,10 @@ static void ahci_pmp_detach(struct ata_port *ap)
 	writel(cmd, port_mmio + PORT_CMD);
 
 	pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+	/* see comment above in ahci_pmp_attach() */
+	if (!(ap->pflags & ATA_PFLAG_FROZEN))
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
 }
 
 int ahci_port_resume(struct ata_port *ap)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 423c0a6952b2..76c3c15cb1e6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4139,6 +4139,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	 */
 	{ "PIONEER DVD-RW  DVRTD08",	"1.00",	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-212D",	"1.28", ATA_HORKAGE_NOSETXFER },
+	{ "PIONEER DVD-RW  DVR-216D",	"1.08", ATA_HORKAGE_NOSETXFER },
 
 	/* End Marker */
 	{ }
@@ -5480,7 +5481,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
 	if (!ap)
 		return NULL;
 
-	ap->pflags |= ATA_PFLAG_INITIALIZING;
+	ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN;
 	ap->lock = &host->lock;
 	ap->print_id = -1;
 	ap->host = host;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 88cd22fa65cd..dad9fd660f37 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3316,6 +3316,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	struct ata_eh_context *ehc = &link->eh_context;
 	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
 	enum ata_lpm_policy old_policy = link->lpm_policy;
+	bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM;
 	unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
 	unsigned int err_mask;
 	int rc;
@@ -3332,7 +3333,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	 */
 	ata_for_each_dev(dev, link, ENABLED) {
 		bool hipm = ata_id_has_hipm(dev->id);
-		bool dipm = ata_id_has_dipm(dev->id);
+		bool dipm = ata_id_has_dipm(dev->id) && !no_dipm;
 
 		/* find the first enabled and LPM enabled devices */
 		if (!link_dev)
@@ -3389,7 +3390,8 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 
 	/* host config updated, enable DIPM if transitioning to MIN_POWER */
 	ata_for_each_dev(dev, link, ENABLED) {
-		if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
+		if (policy == ATA_LPM_MIN_POWER && !no_dipm &&
+		    ata_id_has_dipm(dev->id)) {
 			err_mask = ata_dev_set_feature(dev,
 					SETFEATURES_SATA_ENABLE, SATA_DIPM);
 			if (err_mask && err_mask != AC_ERR_DEV) {
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 0da0dcc7dd08..a5fdbdcb0faf 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -33,11 +33,12 @@
 
 
 #define DRV_NAME "pata_at91"
-#define DRV_VERSION "0.1"
+#define DRV_VERSION "0.2"
 
 #define CF_IDE_OFFSET	    0x00c00000
 #define CF_ALT_IDE_OFFSET   0x00e00000
 #define CF_IDE_RES_SIZE     0x08
+#define NCS_RD_PULSE_LIMIT  0x3f /* maximal value for pulse bitfields */
 
 struct at91_ide_info {
 	unsigned long mode;
@@ -49,8 +50,18 @@ struct at91_ide_info {
 	void __iomem *alt_addr;
 };
 
-static const struct ata_timing initial_timing =
-	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+static const struct ata_timing initial_timing = {
+	.mode		= XFER_PIO_0,
+	.setup		= 70,
+	.act8b		= 290,
+	.rec8b		= 240,
+	.cyc8b		= 600,
+	.active		= 165,
+	.recover	= 150,
+	.dmack_hold	= 0,
+	.cycle		= 600,
+	.udma		= 0
+};
 
 static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
@@ -109,6 +120,11 @@ static void set_smc_timing(struct device *dev,
 	/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
 	ncs_read_setup = 1;
 	ncs_read_pulse = read_cycle - 2;
+	if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) {
+		ncs_read_pulse = NCS_RD_PULSE_LIMIT;
+		dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n",
+			ncs_read_pulse);
+	}
 
 	/* Write timings same as read timings */
 	write_cycle = read_cycle;