[libata] Add a bunch of PATA drivers.

The vast majority of drivers and changes are from Alan Cox.  Albert Lee
contributed and maintains pata_pdc2027x.  Adrian Bunk, Andrew Morton,
and Tejun Heo contributed various minor fixes and updates.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 949 insertions, 0 deletions

diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
new file mode 100644
index 000000000000..eb510660b424
--- /dev/null
+++ b/drivers/ata/pata_legacy.c
@@ -0,0 +1,949 @@
+/*
+ *   pata-legacy.c - Legacy port PATA/SATA controller driver.
+ *   Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *   An ATA driver for the legacy ATA ports.
+ *
+ *   Data Sources:
+ *	Opti 82C465/82C611 support: Data sheets at opti-inc.com
+ *	HT6560 series:
+ *	Promise 20230/20620:
+ *		http://www.ryston.cz/petr/vlb/pdc20230b.html
+ *		http://www.ryston.cz/petr/vlb/pdc20230c.html
+ *		http://www.ryston.cz/petr/vlb/pdc20630.html
+ *
+ *  Unsupported but docs exist:
+ *	Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
+ *	Winbond W83759A
+ *
+ *  This driver handles legacy (that is "ISA/VLB side") IDE ports found
+ *  on PC class systems. There are three hybrid devices that are exceptions
+ *  The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and
+ *  the MPIIX where the tuning is PCI side but the IDE is "ISA side".
+ *
+ *  Specific support is included for the ht6560a/ht6560b/opti82c611a/
+ *  opti82c465mv/promise 20230c/20630
+ *
+ *  Use the autospeed and pio_mask options with:
+ *	Appian ADI/2 aka CLPD7220 or AIC25VL01.
+ *  Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
+ *	Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759,
+ *	Winbond W83759A, Promise PDC20230-B
+ *
+ *  For now use autospeed and pio_mask as above with the W83759A. This may
+ *  change.
+ *
+ *  TODO
+ *	Merge existing pata_qdi driver
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "pata_legacy"
+#define DRV_VERSION "0.5.3"
+
+#define NR_HOST 6
+
+static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
+static int legacy_irq[NR_HOST] = { 15, 14, 11, 10, 8, 12 };
+
+struct legacy_data {
+	unsigned long timing;
+	u8 clock[2];
+	u8 last;
+	int fast;
+	struct platform_device *platform_dev;
+
+};
+
+static struct legacy_data legacy_data[NR_HOST];
+static struct ata_host *legacy_host[NR_HOST];
+static int nr_legacy_host;
+
+
+static int probe_all;			/* Set to check all ISA port ranges */
+static int ht6560a;			/* HT 6560A on primary 1, secondary 2, both 3 */
+static int ht6560b;			/* HT 6560A on primary 1, secondary 2, both 3 */
+static int opti82c611a;			/* Opti82c611A on primary 1, secondary 2, both 3 */
+static int opti82c46x;		/* Opti 82c465MV present (pri/sec autodetect) */
+static int autospeed;			/* Chip present which snoops speed changes */
+static int pio_mask = 0x1F;		/* PIO range for autospeed devices */
+
+/**
+ *	legacy_set_mode		-	mode setting
+ *	@ap: IDE interface
+ *
+ *	Use a non standard set_mode function. We don't want to be tuned.
+ *
+ *	The BIOS configured everything. Our job is not to fiddle. Just use
+ *	whatever PIO the hardware is using and leave it at that. When we
+ *	get some kind of nice user driven API for control then we can
+ *	expand on this as per hdparm in the base kernel.
+ */
+
+static void legacy_set_mode(struct ata_port *ap)
+{
+	int i;
+
+	for (i = 0; i < ATA_MAX_DEVICES; i++) {
+		struct ata_device *dev = &ap->device[i];
+		if (ata_dev_enabled(dev)) {
+			dev->pio_mode = XFER_PIO_0;
+			dev->xfer_mode = XFER_PIO_0;
+			dev->xfer_shift = ATA_SHIFT_PIO;
+			dev->flags |= ATA_DFLAG_PIO;
+		}
+	}
+}
+
+static struct scsi_host_template legacy_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+/*
+ *	These ops are used if the user indicates the hardware
+ *	snoops the commands to decide on the mode and handles the
+ *	mode selection "magically" itself. Several legacy controllers
+ *	do this. The mode range can be set if it is not 0x1F by setting
+ *	pio_mask as well.
+ */
+
+static struct ata_port_operations simple_port_ops = {
+	.port_disable	= ata_port_disable,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= ata_bmdma_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer_noirq,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static struct ata_port_operations legacy_port_ops = {
+	.set_mode	= legacy_set_mode,
+
+	.port_disable	= ata_port_disable,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.error_handler	= ata_bmdma_error_handler,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer_noirq,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+/*
+ *	Promise 20230C and 20620 support
+ *
+ *	This controller supports PIO0 to PIO2. We set PIO timings conservatively to
+ *	allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
+ *	controller and PIO'd to the host and not supported.
+ */
+
+static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	int tries = 5;
+	int pio = adev->pio_mode - XFER_PIO_0;
+	u8 rt;
+	unsigned long flags;
+	
+	/* Safe as UP only. Force I/Os to occur together */
+	
+	local_irq_save(flags);
+	
+	/* Unlock the control interface */
+	do
+	{
+		inb(0x1F5);
+		outb(inb(0x1F2) | 0x80, 0x1F2);
+		inb(0x1F2);
+		inb(0x3F6);
+		inb(0x3F6);
+		inb(0x1F2);
+		inb(0x1F2);
+	}
+	while((inb(0x1F2) & 0x80) && --tries);
+
+	local_irq_restore(flags);
+	
+	outb(inb(0x1F4) & 0x07, 0x1F4);
+
+	rt = inb(0x1F3);
+	rt &= 0x07 << (3 * adev->devno);
+	if (pio)
+		rt |= (1 + 3 * pio) << (3 * adev->devno);
+
+	udelay(100);
+	outb(inb(0x1F2) | 0x01, 0x1F2);
+	udelay(100);
+	inb(0x1F5);
+
+}
+
+static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+{
+	struct ata_port *ap = adev->ap;
+	int slop = buflen & 3;
+	unsigned long flags;
+
+	if (ata_id_has_dword_io(adev->id)) {
+		local_irq_save(flags);
+
+		/* Perform the 32bit I/O synchronization sequence */
+		inb(ap->ioaddr.nsect_addr);
+		inb(ap->ioaddr.nsect_addr);
+		inb(ap->ioaddr.nsect_addr);
+
+		/* Now the data */
+
+		if (write_data)
+			outsl(ap->ioaddr.data_addr, buf, buflen >> 2);
+		else
+			insl(ap->ioaddr.data_addr, buf, buflen >> 2);
+
+		if (unlikely(slop)) {
+			u32 pad;
+			if (write_data) {
+				memcpy(&pad, buf + buflen - slop, slop);
+				outl(le32_to_cpu(pad), ap->ioaddr.data_addr);
+			} else {
+				pad = cpu_to_le16(inl(ap->ioaddr.data_addr));
+				memcpy(buf + buflen - slop, &pad, slop);
+			}
+		}
+		local_irq_restore(flags);
+	}
+	else
+		ata_pio_data_xfer_noirq(adev, buf, buflen, write_data);
+}
+
+static struct ata_port_operations pdc20230_port_ops = {
+	.set_piomode	= pdc20230_set_piomode,
+
+	.port_disable	= ata_port_disable,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.error_handler	= ata_bmdma_error_handler,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= pdc_data_xfer_vlb,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+/*
+ *	Holtek 6560A support
+ *
+ *	This controller supports PIO0 to PIO2 (no IORDY even though higher timings
+ *	can be loaded).
+ */
+
+static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	u8 active, recover;
+	struct ata_timing t;
+
+	/* Get the timing data in cycles. For now play safe at 50Mhz */
+	ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+
+	active = FIT(t.active, 2, 15);
+	recover = FIT(t.recover, 4, 15);
+
+	inb(0x3E6);
+	inb(0x3E6);
+	inb(0x3E6);
+	inb(0x3E6);
+
+	outb(recover << 4 | active, ap->ioaddr.device_addr);
+	inb(ap->ioaddr.status_addr);
+}
+
+static struct ata_port_operations ht6560a_port_ops = {
+	.set_piomode	= ht6560a_set_piomode,
+
+	.port_disable	= ata_port_disable,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.error_handler	= ata_bmdma_error_handler,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,	/* Check vlb/noirq */
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+/*
+ *	Holtek 6560B support
+ *
+ *	This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
+ *	unless we see an ATAPI device in which case we force it off.
+ *
+ *	FIXME: need to implement 2nd channel support.
+ */
+
+static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	u8 active, recover;
+	struct ata_timing t;
+
+	/* Get the timing data in cycles. For now play safe at 50Mhz */
+	ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+
+	active = FIT(t.active, 2, 15);
+	recover = FIT(t.recover, 2, 16);
+	recover &= 0x15;
+
+	inb(0x3E6);
+	inb(0x3E6);
+	inb(0x3E6);
+	inb(0x3E6);
+
+	outb(recover << 4 | active, ap->ioaddr.device_addr);
+
+	if (adev->class != ATA_DEV_ATA) {
+		u8 rconf = inb(0x3E6);
+		if (rconf & 0x24) {
+			rconf &= ~ 0x24;
+			outb(rconf, 0x3E6);
+		}
+	}
+	inb(ap->ioaddr.status_addr);
+}
+
+static struct ata_port_operations ht6560b_port_ops = {
+	.set_piomode	= ht6560b_set_piomode,
+
+	.port_disable	= ata_port_disable,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.error_handler	= ata_bmdma_error_handler,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,	/* FIXME: Check 32bit and noirq */
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+/*
+ *	Opti core chipset helpers
+ */
+ 
+/**
+ *	opti_syscfg	-	read OPTI chipset configuration
+ *	@reg: Configuration register to read
+ *
+ *	Returns the value of an OPTI system board configuration register.
+ */
+
+static u8 opti_syscfg(u8 reg)
+{
+	unsigned long flags;
+	u8 r;
+	
+	/* Uniprocessor chipset and must force cycles adjancent */
+	local_irq_save(flags);
+	outb(reg, 0x22);
+	r = inb(0x24);
+	local_irq_restore(flags);
+	return r;
+}
+
+/*
+ *	Opti 82C611A
+ *
+ *	This controller supports PIO0 to PIO3.
+ */
+
+static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	u8 active, recover, setup;
+	struct ata_timing t;
+	struct ata_device *pair = ata_dev_pair(adev);
+	int clock;
+	int khz[4] = { 50000, 40000, 33000, 25000 };
+	u8 rc;
+
+	/* Enter configuration mode */
+	inw(ap->ioaddr.error_addr);
+	inw(ap->ioaddr.error_addr);
+	outb(3, ap->ioaddr.nsect_addr);
+
+	/* Read VLB clock strapping */
+	clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03];
+
+	/* Get the timing data in cycles */
+	ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
+
+	/* Setup timing is shared */
+	if (pair) {
+		struct ata_timing tp;
+		ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
+
+		ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+	}
+
+	active = FIT(t.active, 2, 17) - 2;
+	recover = FIT(t.recover, 1, 16) - 1;
+	setup = FIT(t.setup, 1, 4) - 1;
+
+	/* Select the right timing bank for write timing */
+	rc = inb(ap->ioaddr.lbal_addr);
+	rc &= 0x7F;
+	rc |= (adev->devno << 7);
+	outb(rc, ap->ioaddr.lbal_addr);
+
+	/* Write the timings */
+	outb(active << 4 | recover, ap->ioaddr.error_addr);
+
+	/* Select the right bank for read timings, also
+	   load the shared timings for address */
+	rc = inb(ap->ioaddr.device_addr);
+	rc &= 0xC0;
+	rc |= adev->devno;	/* Index select */
+	rc |= (setup << 4) | 0x04;
+	outb(rc, ap->ioaddr.device_addr);
+
+	/* Load the read timings */
+	outb(active << 4 | recover, ap->ioaddr.data_addr);
+
+	/* Ensure the timing register mode is right */
+	rc = inb (ap->ioaddr.lbal_addr);
+	rc &= 0x73;
+	rc |= 0x84;
+	outb(rc, ap->ioaddr.lbal_addr);
+
+	/* Exit command mode */
+	outb(0x83,  ap->ioaddr.nsect_addr);
+}
+
+
+static struct ata_port_operations opti82c611a_port_ops = {
+	.set_piomode	= opti82c611a_set_piomode,
+
+	.port_disable	= ata_port_disable,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.error_handler	= ata_bmdma_error_handler,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+/*
+ *	Opti 82C465MV
+ *
+ *	This controller supports PIO0 to PIO3. Unlike the 611A the MVB
+ *	version is dual channel but doesn't have a lot of unique registers.
+ */
+
+static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	u8 active, recover, setup;
+	struct ata_timing t;
+	struct ata_device *pair = ata_dev_pair(adev);
+	int clock;
+	int khz[4] = { 50000, 40000, 33000, 25000 };
+	u8 rc;
+	u8 sysclk;
+
+	/* Get the clock */
+	sysclk = opti_syscfg(0xAC) & 0xC0;	/* BIOS set */
+
+	/* Enter configuration mode */
+	inw(ap->ioaddr.error_addr);
+	inw(ap->ioaddr.error_addr);
+	outb(3, ap->ioaddr.nsect_addr);
+
+	/* Read VLB clock strapping */
+	clock = 1000000000 / khz[sysclk];
+
+	/* Get the timing data in cycles */
+	ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
+
+	/* Setup timing is shared */
+	if (pair) {
+		struct ata_timing tp;
+		ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
+
+		ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+	}
+
+	active = FIT(t.active, 2, 17) - 2;
+	recover = FIT(t.recover, 1, 16) - 1;
+	setup = FIT(t.setup, 1, 4) - 1;
+
+	/* Select the right timing bank for write timing */
+	rc = inb(ap->ioaddr.lbal_addr);
+	rc &= 0x7F;
+	rc |= (adev->devno << 7);
+	outb(rc, ap->ioaddr.lbal_addr);
+
+	/* Write the timings */
+	outb(active << 4 | recover, ap->ioaddr.error_addr);
+
+	/* Select the right bank for read timings, also
+	   load the shared timings for address */
+	rc = inb(ap->ioaddr.device_addr);
+	rc &= 0xC0;
+	rc |= adev->devno;	/* Index select */
+	rc |= (setup << 4) | 0x04;
+	outb(rc, ap->ioaddr.device_addr);
+
+	/* Load the read timings */
+	outb(active << 4 | recover, ap->ioaddr.data_addr);
+
+	/* Ensure the timing register mode is right */
+	rc = inb (ap->ioaddr.lbal_addr);
+	rc &= 0x73;
+	rc |= 0x84;
+	outb(rc, ap->ioaddr.lbal_addr);
+
+	/* Exit command mode */
+	outb(0x83,  ap->ioaddr.nsect_addr);
+
+	/* We need to know this for quad device on the MVB */
+	ap->host->private_data = ap;
+}
+
+/**
+ *	opt82c465mv_qc_issue_prot	-	command issue
+ *	@qc: command pending
+ *
+ *	Called when the libata layer is about to issue a command. We wrap
+ *	this interface so that we can load the correct ATA timings. The
+ *	MVB has a single set of timing registers and these are shared
+ *	across channels. As there are two registers we really ought to
+ *	track the last two used values as a sort of register window. For
+ *	now we just reload on a channel switch. On the single channel
+ *	setup this condition never fires so we do nothing extra.
+ *
+ *	FIXME: dual channel needs ->serialize support
+ */
+
+static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_device *adev = qc->dev;
+
+	/* If timings are set and for the wrong channel (2nd test is
+	   due to a libata shortcoming and will eventually go I hope) */
+	if (ap->host->private_data != ap->host
+	    && ap->host->private_data != NULL)
+		opti82c46x_set_piomode(ap, adev);
+
+	return ata_qc_issue_prot(qc);
+}
+
+static struct ata_port_operations opti82c46x_port_ops = {
+	.set_piomode	= opti82c46x_set_piomode,
+
+	.port_disable	= ata_port_disable,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.error_handler	= ata_bmdma_error_handler,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= opti82c46x_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+
+/**
+ *	legacy_init_one		-	attach a legacy interface
+ *	@port: port number
+ *	@io: I/O port start
+ *	@ctrl: control port
+ *	@irq: interrupt line
+ *
+ *	Register an ISA bus IDE interface. Such interfaces are PIO and we
+ *	assume do not support IRQ sharing.
+ */
+
+static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
+{
+	struct legacy_data *ld = &legacy_data[nr_legacy_host];
+	struct ata_probe_ent ae;
+	struct platform_device *pdev;
+	int ret = -EBUSY;
+	struct ata_port_operations *ops = &legacy_port_ops;
+	int pio_modes = pio_mask;
+	u32 mask = (1 << port);
+
+	if (request_region(io, 8, "pata_legacy") == NULL)
+		return -EBUSY;
+	if (request_region(ctrl, 1, "pata_legacy") == NULL)
+		goto fail_io;
+
+	pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
+	if (pdev == NULL)
+		goto fail_dev;
+
+	if (ht6560a & mask) {
+		ops = &ht6560a_port_ops;
+		pio_modes = 0x07;
+	}
+	if (ht6560b & mask) {
+		ops = &ht6560b_port_ops;
+		pio_modes = 0x1F;
+	}
+	if (opti82c611a & mask) {
+		ops = &opti82c611a_port_ops;
+		pio_modes = 0x0F;
+	}
+	if (opti82c46x & mask) {
+		ops = &opti82c46x_port_ops;
+		pio_modes = 0x0F;
+	}
+
+	/* Probe for automatically detectable controllers */
+ 
+	if (io == 0x1F0 && ops == &legacy_port_ops) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+
+		/* Probes */
+		inb(0x1F5);
+		outb(inb(0x1F2) | 0x80, 0x1F2);
+		inb(0x1F2);
+		inb(0x3F6);
+		inb(0x3F6);
+		inb(0x1F2);
+		inb(0x1F2);
+
+		if ((inb(0x1F2) & 0x80) == 0) {
+			/* PDC20230c or 20630 ? */
+			printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
+				pio_modes = 0x07;
+			ops = &pdc20230_port_ops;
+			udelay(100);
+			inb(0x1F5);
+		} else {
+			outb(0x55, 0x1F2);
+			inb(0x1F2);
+			inb(0x1F2);
+			if (inb(0x1F2) == 0x00) {
+				printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
+			}
+		}
+		local_irq_restore(flags);
+	}
+
+
+	/* Chip does mode setting by command snooping */
+	if (ops == &legacy_port_ops && (autospeed & mask))
+		ops = &simple_port_ops;
+	memset(&ae, 0, sizeof(struct ata_probe_ent));
+	INIT_LIST_HEAD(&ae.node);
+	ae.dev = &pdev->dev;
+	ae.port_ops = ops;
+	ae.sht = &legacy_sht;
+	ae.n_ports = 1;
+	ae.pio_mask = pio_modes;
+	ae.irq = irq;
+	ae.irq_flags = 0;
+	ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST;
+	ae.port[0].cmd_addr = io;
+	ae.port[0].altstatus_addr = ctrl;
+	ae.port[0].ctl_addr =	ctrl;
+	ata_std_ports(&ae.port[0]);
+	ae.private_data = ld;
+
+	ret = ata_device_add(&ae);
+	if (ret == 0) {
+		ret = -ENODEV;
+		goto fail;
+	}
+	legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
+	ld->platform_dev = pdev;
+	return 0;
+
+fail:
+	platform_device_unregister(pdev);
+fail_dev:
+	release_region(ctrl, 1);
+fail_io:
+	release_region(io, 8);
+	return ret;
+}
+
+/**
+ *	legacy_check_special_cases	-	ATA special cases
+ *	@p: PCI device to check
+ *	@master: set this if we find an ATA master
+ *	@master: set this if we find an ATA secondary
+ *
+ *	A small number of vendors implemented early PCI ATA interfaces on bridge logic
+ *	without the ATA interface being PCI visible. Where we have a matching PCI driver
+ *	we must skip the relevant device here. If we don't know about it then the legacy
+ *	driver is the right driver anyway.
+ */
+
+static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
+{
+	/* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
+	if (p->vendor == 0x1078 && p->device == 0x0000) {
+		*primary = *secondary = 1;
+		return;
+	}
+	/* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */
+	if (p->vendor == 0x1078 && p->device == 0x0002) {
+		*primary = *secondary = 1;
+		return;
+	}
+	/* Intel MPIIX - PIO ATA on non PCI side of bridge */
+	if (p->vendor == 0x8086 && p->device == 0x1234) {
+		u16 r;
+		pci_read_config_word(p, 0x6C, &r);
+		if (r & 0x8000) {	/* ATA port enabled */
+			if (r & 0x4000)
+				*secondary = 1;
+			else
+				*primary = 1;
+		}
+		return;
+	}
+}
+
+
+/**
+ *	legacy_init		-	attach legacy interfaces
+ *
+ *	Attach legacy IDE interfaces by scanning the usual IRQ/port suspects.
+ *	Right now we do not scan the ide0 and ide1 address but should do so
+ *	for non PCI systems or systems with no PCI IDE legacy mode devices.
+ *	If you fix that note there are special cases to consider like VLB
+ *	drivers and CS5510/20.
+ */
+
+static __init int legacy_init(void)
+{
+	int i;
+	int ct = 0;
+	int primary = 0;
+	int secondary = 0;
+	int last_port = NR_HOST;
+
+	struct pci_dev *p = NULL;
+
+	for_each_pci_dev(p) {
+		int r;
+		/* Check for any overlap of the system ATA mappings. Native mode controllers
+		   stuck on these addresses or some devices in 'raid' mode won't be found by
+		   the storage class test */
+		for (r = 0; r < 6; r++) {
+			if (pci_resource_start(p, r) == 0x1f0)
+				primary = 1;
+			if (pci_resource_start(p, r) == 0x170)
+				secondary = 1;
+		}
+		/* Check for special cases */
+		legacy_check_special_cases(p, &primary, &secondary);
+
+		/* If PCI bus is present then don't probe for tertiary legacy ports */
+		if (probe_all == 0)
+			last_port = 2;
+	}
+
+	/* If an OPTI 82C46X is present find out where the channels are */	
+	if (opti82c46x) {
+		static const char *optis[4] = {
+			"3/463MV", "5MV",
+			"5MVA", "5MVB"
+		};
+		u8 chans = 1;
+		u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
+		
+		opti82c46x = 3;	/* Assume master and slave first */
+		printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
+		if (ctrl == 3)
+			chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
+		ctrl = opti_syscfg(0xAC);
+		/* Check enabled and this port is the 465MV port. On the
+		   MVB we may have two channels */
+		if (ctrl & 8) {
+			if (ctrl & 4)
+				opti82c46x = 2;	/* Slave */
+			else
+				opti82c46x = 1;	/* Master */
+			if (chans == 2)
+				opti82c46x = 3; /* Master and Slave */
+		}	/* Slave only */
+		else if (chans == 1)
+			opti82c46x = 1;
+	}
+
+	for (i = 0; i < last_port; i++) {
+		/* Skip primary if we have seen a PCI one */
+		if (i == 0 && primary == 1)
+			continue;
+		/* Skip secondary if we have seen a PCI one */
+		if (i == 1 && secondary == 1)
+			continue;
+		if (legacy_init_one(i, legacy_port[i],
+				   legacy_port[i] + 0x0206,
+				   legacy_irq[i]) == 0)
+			ct++;
+	}
+	if (ct != 0)
+		return 0;
+	return -ENODEV;
+}
+
+static __exit void legacy_exit(void)
+{
+	int i;
+
+	for (i = 0; i < nr_legacy_host; i++) {
+		struct legacy_data *ld = &legacy_data[i];
+		struct ata_port *ap =legacy_host[i]->ports[0];
+		unsigned long io = ap->ioaddr.cmd_addr;
+		unsigned long ctrl = ap->ioaddr.ctl_addr;
+		ata_host_remove(legacy_host[i]);
+		platform_device_unregister(ld->platform_dev);
+		if (ld->timing)
+			release_region(ld->timing, 2);
+		release_region(io, 8);
+		release_region(ctrl, 1);
+	}
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for legacy ATA");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+module_param(probe_all, int, 0);
+module_param(autospeed, int, 0);
+module_param(ht6560a, int, 0);
+module_param(ht6560b, int, 0);
+module_param(opti82c611a, int, 0);
+module_param(opti82c46x, int, 0);
+module_param(pio_mask, int, 0);
+
+module_init(legacy_init);
+module_exit(legacy_exit);
+