Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (38 commits)
  sata_via: Delay on vt6420 when starting ATAPI DMA write
  ata: Detect Delkin Devices compact flash
  pata_efar: Enable parallel scanning
  pata_atiixp: enable parallel scan
  [libata] pata_atiixp: add locking for parallel scanning
  [libata] pata_efar: add locking for parallel scanning
  libata: Pass host flags into the pci helper
  [libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI
  libata: Allow pata_legacy to be built on non-ISA but PCI systems
  pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
  pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards
  [libata] pata_at91: fix backslash-continued string
  pata_via: store UDMA masks in via_isa_bridges table
  pata_via: fix address setup timings underlocking
  pata_serverworks: fix error message
  pata_serverworks: fix PIO setup for the second channel
  pata_efar: fix secondary port support
  pata_cypress: fix PIO timings underclocking
  pata_cs5535: use correct values for PIO1 and PIO2 data timings
  pata_cmd64x: remove unused definitions
  ...

1 files changed, 13 insertions, 14 deletions

diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 0efb1f58f255..4c81a71b8877 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -2,6 +2,7 @@
  * pata_cmd64x.c 	- CMD64x PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
  *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *			  (C) 2009-2010 Bartlomiej Zolnierkiewicz
  *
  * Based upon
  * linux/drivers/ide/pci/cmd64x.c		Version 1.30	Sept 10, 2002
@@ -39,11 +40,7 @@
 
 enum {
 	CFR 		= 0x50,
-		CFR_INTR_CH0  = 0x02,
-	CNTRL 		= 0x51,
-		CNTRL_DIS_RA0 = 0x40,
-		CNTRL_DIS_RA1 = 0x80,
-		CNTRL_ENA_2ND = 0x08,
+		CFR_INTR_CH0  = 0x04,
 	CMDTIM 		= 0x52,
 	ARTTIM0 	= 0x53,
 	DRWTIM0 	= 0x54,
@@ -53,9 +50,6 @@ enum {
 		ARTTIM23_DIS_RA2  = 0x04,
 		ARTTIM23_DIS_RA3  = 0x08,
 		ARTTIM23_INTR_CH1 = 0x10,
-	ARTTIM2 	= 0x57,
-	ARTTIM3 	= 0x57,
-	DRWTIM23	= 0x58,
 	DRWTIM2 	= 0x58,
 	BRST 		= 0x59,
 	DRWTIM3 	= 0x5b,
@@ -63,14 +57,11 @@ enum {
 	MRDMODE		= 0x71,
 		MRDMODE_INTR_CH0 = 0x04,
 		MRDMODE_INTR_CH1 = 0x08,
-		MRDMODE_BLK_CH0  = 0x10,
-		MRDMODE_BLK_CH1	 = 0x20,
 	BMIDESR0	= 0x72,
 	UDIDETCR0	= 0x73,
 	DTPR0		= 0x74,
 	BMIDECR1	= 0x78,
 	BMIDECSR	= 0x79,
-	BMIDESR1	= 0x7A,
 	UDIDETCR1	= 0x7B,
 	DTPR1		= 0x7C
 };
@@ -130,8 +121,14 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m
 
 		if (pair) {
 			struct ata_timing tp;
+
 			ata_timing_compute(pair, pair->pio_mode, &tp, T, 0);
 			ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
+			if (pair->dma_mode) {
+				ata_timing_compute(pair, pair->dma_mode,
+						&tp, T, 0);
+				ata_timing_merge(&tp, &t, &t, ATA_TIMING_SETUP);
+			}
 		}
 	}
 
@@ -147,7 +144,9 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m
 	/* Now convert the clocks into values we can actually stuff into
 	   the chip */
 
-	if (t.recover > 1)
+	if (t.recover == 16)
+		t.recover = 0;
+	else if (t.recover > 1)
 		t.recover--;
 	else
 		t.recover = 15;
@@ -245,7 +244,7 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc)
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 dma_intr;
 	int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
-	int dma_reg = ap->port_no ? ARTTIM2 : CFR;
+	int dma_reg = ap->port_no ? ARTTIM23 : CFR;
 
 	ata_bmdma_stop(qc);
 
@@ -368,7 +367,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
 
-	return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
+	return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM