libata: implement and use ata_port_desc() to report port configuration

Currently, port configuration reporting has the following problems.

* iomapped address is reported instead of raw address
* report contains irrelevant fields or lacks necessary fields for
  non-SFF controllers.
* host->irq/irq2 are there just for reporting and hacky.

This patch implements and uses ata_port_desc() and
ata_port_pbar_desc().  ata_port_desc() is almost identical to
ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no
locking requirement, can only be used during host initialization and "
" is used as separator instead of ", ".  ata_port_pbar_desc() is a
helper to ease reporting of a PCI BAR or an offsetted address into it.

LLD pushes whatever description it wants using the above two
functions.  The accumulated description is printed on host
registration after "[S/P]ATA max MAX_XFERMODE ".

SFF init helpers and ata_host_activate() automatically add
descriptions for addresses and irq respectively, so only LLDs which
isn't standard SFF need to add custom descriptions.  In many cases,
such controllers need to report different things anyway.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 11 insertions, 16 deletions

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b81265d1e469..84d81b26e384 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6541,7 +6541,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	/* set cable, sata_spd_limit and report */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
-		int irq_line;
 		unsigned long xfer_mask;
 
 		/* set SATA cable type if still unset */
@@ -6551,24 +6550,16 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 		/* init sata_spd_limit to the current value */
 		sata_link_init_spd(&ap->link);
 
-		/* report the secondary IRQ for second channel legacy */
-		irq_line = host->irq;
-		if (i == 1 && host->irq2)
-			irq_line = host->irq2;
-
+		/* print per-port info to dmesg */
 		xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
 					      ap->udma_mask);
 
-		/* print per-port info to dmesg */
 		if (!ata_port_is_dummy(ap))
-			ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
-					"ctl 0x%p bmdma 0x%p irq %d\n",
+			ata_port_printk(ap, KERN_INFO,
+					"%cATA max %s %s\n",
 					(ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
 					ata_mode_string(xfer_mask),
-					ap->ioaddr.cmd_addr,
-					ap->ioaddr.ctl_addr,
-					ap->ioaddr.bmdma_addr,
-					irq_line);
+					ap->link.eh_info.desc);
 		else
 			ata_port_printk(ap, KERN_INFO, "DUMMY\n");
 	}
@@ -6652,7 +6643,7 @@ int ata_host_activate(struct ata_host *host, int irq,
 		      irq_handler_t irq_handler, unsigned long irq_flags,
 		      struct scsi_host_template *sht)
 {
-	int rc;
+	int i, rc;
 
 	rc = ata_host_start(host);
 	if (rc)
@@ -6663,8 +6654,8 @@ int ata_host_activate(struct ata_host *host, int irq,
 	if (rc)
 		return rc;
 
-	/* Used to print device info at probe */
-	host->irq = irq;
+	for (i = 0; i < host->n_ports; i++)
+		ata_port_desc(host->ports[i], "irq %d", irq);
 
 	rc = ata_host_register(host, sht);
 	/* if failed, just free the IRQ and leave ports alone */
@@ -7136,6 +7127,10 @@ EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
 EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
 EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
 EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
+EXPORT_SYMBOL_GPL(ata_port_desc);
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
+#endif /* CONFIG_PCI */
 EXPORT_SYMBOL_GPL(ata_eng_timeout);
 EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
 EXPORT_SYMBOL_GPL(ata_link_abort);