ACPI / init: Switch over platform to the ACPI mode later

Commit 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before
timekeeping_init()" moved the ACPI subsystem initialization,
including the ACPI mode enabling, to an earlier point in the
initialization sequence, to allow the timekeeping subsystem
use ACPI early.  Unfortunately, that resulted in boot regressions
on some systems and the early ACPI initialization was moved toward
its original position in the kernel initialization code by commit
c4e1acbb35e4 "ACPI / init: Invoke early ACPI initialization later".

However, that turns out to be insufficient, as boot is still broken
on the Tyan S8812 mainboard.

To fix that issue, split the ACPI early initialization code into
two pieces so the majority of it still located in acpi_early_init()
and the part switching over the platform into the ACPI mode goes into
a new function, acpi_subsystem_init(), executed at the original early
ACPI initialization spot.

That fixes the Tyan S8812 boot problem, but still allows ACPI
tables to be loaded earlier which is useful to the EFI code in
efi_enter_virtual_mode().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=97141
Fixes: 73f7d1ca3263 "ACPI / init: Run acpi_early_init() before timekeeping_init()"
Reported-and-tested-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>

1 files changed, 41 insertions, 15 deletions

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index c412fdb28d34..513e7230e3d0 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -470,6 +470,16 @@ static int __init acpi_bus_init_irq(void)
 	return 0;
 }
 
+/**
+ * acpi_early_init - Initialize ACPICA and populate the ACPI namespace.
+ *
+ * The ACPI tables are accessible after this, but the handling of events has not
+ * been initialized and the global lock is not available yet, so AML should not
+ * be executed at this point.
+ *
+ * Doing this before switching the EFI runtime services to virtual mode allows
+ * the EfiBootServices memory to be freed slightly earlier on boot.
+ */
 void __init acpi_early_init(void)
 {
 	acpi_status status;
@@ -533,26 +543,42 @@ void __init acpi_early_init(void)
 		acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi;
 	}
 #endif
+	return;
+
+ error0:
+	disable_acpi();
+}
+
+/**
+ * acpi_subsystem_init - Finalize the early initialization of ACPI.
+ *
+ * Switch over the platform to the ACPI mode (if possible), initialize the
+ * handling of ACPI events, install the interrupt and global lock handlers.
+ *
+ * Doing this too early is generally unsafe, but at the same time it needs to be
+ * done before all things that really depend on ACPI.  The right spot appears to
+ * be before finalizing the EFI initialization.
+ */
+void __init acpi_subsystem_init(void)
+{
+	acpi_status status;
+
+	if (acpi_disabled)
+		return;
 
 	status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR PREFIX "Unable to enable ACPI\n");
-		goto error0;
+		disable_acpi();
+	} else {
+		/*
+		 * If the system is using ACPI then we can be reasonably
+		 * confident that any regulators are managed by the firmware
+		 * so tell the regulator core it has everything it needs to
+		 * know.
+		 */
+		regulator_has_full_constraints();
 	}
-
-	/*
-	 * If the system is using ACPI then we can be reasonably
-	 * confident that any regulators are managed by the firmware
-	 * so tell the regulator core it has everything it needs to
-	 * know.
-	 */
-	regulator_has_full_constraints();
-
-	return;
-
-      error0:
-	disable_acpi();
-	return;
 }
 
 static int __init acpi_bus_init(void)