diff options
author | Paolo Valente <paolo.valente@linaro.org> | 2019-01-29 14:06:32 +0300 |
---|---|---|
committer | Jens Axboe <axboe@kernel.dk> | 2019-01-31 22:50:23 +0300 |
commit | 530c4cbb3c62f9e42dbf39279fb346f2d2ab4dbb (patch) | |
tree | aad632d87cc3978218cbad308e0b0bd250025e34 /block/bfq-iosched.c | |
parent | ac8b0cb415f3aa9162009d39624501d37031533b (diff) | |
download | linux-530c4cbb3c62f9e42dbf39279fb346f2d2ab4dbb.tar.xz |
block, bfq: unconditionally plug I/O in asymmetric scenarios
bfq detects the creation of multiple bfq_queues shortly after each
other, namely a burst of queue creations in the terminology used in the
code. If the burst is large, then no queue in the burst is granted
- either I/O-dispatch plugging when the queue remains temporarily idle
while in service;
- or weight raising, because it causes even longer plugging.
In fact, such a plugging tends to lower throughput, while these bursts
are typically due to applications or services that spawn multiple
processes, to reach a common goal as soon as possible. Examples are a
"git grep" or the booting of a system.
Unfortunately, disabling plugging may cause a loss of service guarantees
in asymmetric scenarios, i.e., if queue weights are differentiated or if
more than one group is active.
This commit addresses this issue by no longer disabling I/O-dispatch
plugging for queues in large bursts.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'block/bfq-iosched.c')
-rw-r--r-- | block/bfq-iosched.c | 346 |
1 files changed, 165 insertions, 181 deletions
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index a6fe60114ade..c1bb5e5fcdc4 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -3479,191 +3479,175 @@ static bool idling_boosts_thr_without_issues(struct bfq_data *bfqd, bfqd->wr_busy_queues == 0; } +/* + * There is a case where idling must be performed not for + * throughput concerns, but to preserve service guarantees. + * + * To introduce this case, we can note that allowing the drive + * to enqueue more than one request at a time, and hence + * delegating de facto final scheduling decisions to the + * drive's internal scheduler, entails loss of control on the + * actual request service order. In particular, the critical + * situation is when requests from different processes happen + * to be present, at the same time, in the internal queue(s) + * of the drive. In such a situation, the drive, by deciding + * the service order of the internally-queued requests, does + * determine also the actual throughput distribution among + * these processes. But the drive typically has no notion or + * concern about per-process throughput distribution, and + * makes its decisions only on a per-request basis. Therefore, + * the service distribution enforced by the drive's internal + * scheduler is likely to coincide with the desired + * device-throughput distribution only in a completely + * symmetric scenario where: + * (i) each of these processes must get the same throughput as + * the others; + * (ii) the I/O of each process has the same properties, in + * terms of locality (sequential or random), direction + * (reads or writes), request sizes, greediness + * (from I/O-bound to sporadic), and so on. + * In fact, in such a scenario, the drive tends to treat + * the requests of each of these processes in about the same + * way as the requests of the others, and thus to provide + * each of these processes with about the same throughput + * (which is exactly the desired throughput distribution). In + * contrast, in any asymmetric scenario, device idling is + * certainly needed to guarantee that bfqq receives its + * assigned fraction of the device throughput (see [1] for + * details). + * The problem is that idling may significantly reduce + * throughput with certain combinations of types of I/O and + * devices. An important example is sync random I/O, on flash + * storage with command queueing. So, unless bfqq falls in the + * above cases where idling also boosts throughput, it would + * be important to check conditions (i) and (ii) accurately, + * so as to avoid idling when not strictly needed for service + * guarantees. + * + * Unfortunately, it is extremely difficult to thoroughly + * check condition (ii). And, in case there are active groups, + * it becomes very difficult to check condition (i) too. In + * fact, if there are active groups, then, for condition (i) + * to become false, it is enough that an active group contains + * more active processes or sub-groups than some other active + * group. More precisely, for condition (i) to hold because of + * such a group, it is not even necessary that the group is + * (still) active: it is sufficient that, even if the group + * has become inactive, some of its descendant processes still + * have some request already dispatched but still waiting for + * completion. In fact, requests have still to be guaranteed + * their share of the throughput even after being + * dispatched. In this respect, it is easy to show that, if a + * group frequently becomes inactive while still having + * in-flight requests, and if, when this happens, the group is + * not considered in the calculation of whether the scenario + * is asymmetric, then the group may fail to be guaranteed its + * fair share of the throughput (basically because idling may + * not be performed for the descendant processes of the group, + * but it had to be). We address this issue with the + * following bi-modal behavior, implemented in the function + * bfq_symmetric_scenario(). + * + * If there are groups with requests waiting for completion + * (as commented above, some of these groups may even be + * already inactive), then the scenario is tagged as + * asymmetric, conservatively, without checking any of the + * conditions (i) and (ii). So the device is idled for bfqq. + * This behavior matches also the fact that groups are created + * exactly if controlling I/O is a primary concern (to + * preserve bandwidth and latency guarantees). + * + * On the opposite end, if there are no groups with requests + * waiting for completion, then only condition (i) is actually + * controlled, i.e., provided that condition (i) holds, idling + * is not performed, regardless of whether condition (ii) + * holds. In other words, only if condition (i) does not hold, + * then idling is allowed, and the device tends to be + * prevented from queueing many requests, possibly of several + * processes. Since there are no groups with requests waiting + * for completion, then, to control condition (i) it is enough + * to check just whether all the queues with requests waiting + * for completion also have the same weight. + * + * Not checking condition (ii) evidently exposes bfqq to the + * risk of getting less throughput than its fair share. + * However, for queues with the same weight, a further + * mechanism, preemption, mitigates or even eliminates this + * problem. And it does so without consequences on overall + * throughput. This mechanism and its benefits are explained + * in the next three paragraphs. + * + * Even if a queue, say Q, is expired when it remains idle, Q + * can still preempt the new in-service queue if the next + * request of Q arrives soon (see the comments on + * bfq_bfqq_update_budg_for_activation). If all queues and + * groups have the same weight, this form of preemption, + * combined with the hole-recovery heuristic described in the + * comments on function bfq_bfqq_update_budg_for_activation, + * are enough to preserve a correct bandwidth distribution in + * the mid term, even without idling. In fact, even if not + * idling allows the internal queues of the device to contain + * many requests, and thus to reorder requests, we can rather + * safely assume that the internal scheduler still preserves a + * minimum of mid-term fairness. + * + * More precisely, this preemption-based, idleless approach + * provides fairness in terms of IOPS, and not sectors per + * second. This can be seen with a simple example. Suppose + * that there are two queues with the same weight, but that + * the first queue receives requests of 8 sectors, while the + * second queue receives requests of 1024 sectors. In + * addition, suppose that each of the two queues contains at + * most one request at a time, which implies that each queue + * always remains idle after it is served. Finally, after + * remaining idle, each queue receives very quickly a new + * request. It follows that the two queues are served + * alternatively, preempting each other if needed. This + * implies that, although both queues have the same weight, + * the queue with large requests receives a service that is + * 1024/8 times as high as the service received by the other + * queue. + * + * The motivation for using preemption instead of idling (for + * queues with the same weight) is that, by not idling, + * service guarantees are preserved (completely or at least in + * part) without minimally sacrificing throughput. And, if + * there is no active group, then the primary expectation for + * this device is probably a high throughput. + * + * We are now left only with explaining the additional + * compound condition that is checked below for deciding + * whether the scenario is asymmetric. To explain this + * compound condition, we need to add that the function + * bfq_symmetric_scenario checks the weights of only + * non-weight-raised queues, for efficiency reasons (see + * comments on bfq_weights_tree_add()). Then the fact that + * bfqq is weight-raised is checked explicitly here. More + * precisely, the compound condition below takes into account + * also the fact that, even if bfqq is being weight-raised, + * the scenario is still symmetric if all queues with requests + * waiting for completion happen to be + * weight-raised. Actually, we should be even more precise + * here, and differentiate between interactive weight raising + * and soft real-time weight raising. + * + * As a side note, it is worth considering that the above + * device-idling countermeasures may however fail in the + * following unlucky scenario: if idling is (correctly) + * disabled in a time period during which all symmetry + * sub-conditions hold, and hence the device is allowed to + * enqueue many requests, but at some later point in time some + * sub-condition stops to hold, then it may become impossible + * to let requests be served in the desired order until all + * the requests already queued in the device have been served. + */ static bool idling_needed_for_service_guarantees(struct bfq_data *bfqd, struct bfq_queue *bfqq) { - /* - * There is a case where idling must be performed not for - * throughput concerns, but to preserve service guarantees. - * - * To introduce this case, we can note that allowing the drive - * to enqueue more than one request at a time, and thereby - * delegating de facto final scheduling decisions to the - * drive's internal scheduler, entails loss of control on the - * actual request service order. In particular, the critical - * situation is when requests from different processes happen - * to be present, at the same time, in the internal queue(s) - * of the drive. In such a situation, the drive, by deciding - * the service order of the internally-queued requests, does - * determine also the actual throughput distribution among - * these processes. But the drive typically has no notion or - * concern about per-process throughput distribution, and - * makes its decisions only on a per-request basis. Therefore, - * the service distribution enforced by the drive's internal - * scheduler is likely to coincide with the desired - * device-throughput distribution only in a completely - * symmetric scenario where: - * (i) each of these processes must get the same throughput as - * the others; - * (ii) the I/O of each process has the same properties, in - * terms of locality (sequential or random), direction - * (reads or writes), request sizes, greediness - * (from I/O-bound to sporadic), and so on. - * In fact, in such a scenario, the drive tends to treat - * the requests of each of these processes in about the same - * way as the requests of the others, and thus to provide - * each of these processes with about the same throughput - * (which is exactly the desired throughput distribution). In - * contrast, in any asymmetric scenario, device idling is - * certainly needed to guarantee that bfqq receives its - * assigned fraction of the device throughput (see [1] for - * details). - * The problem is that idling may significantly reduce - * throughput with certain combinations of types of I/O and - * devices. An important example is sync random I/O, on flash - * storage with command queueing. So, unless bfqq falls in the - * above cases where idling also boosts throughput, it would - * be important to check conditions (i) and (ii) accurately, - * so as to avoid idling when not strictly needed for service - * guarantees. - * - * Unfortunately, it is extremely difficult to thoroughly - * check condition (ii). And, in case there are active groups, - * it becomes very difficult to check condition (i) too. In - * fact, if there are active groups, then, for condition (i) - * to become false, it is enough that an active group contains - * more active processes or sub-groups than some other active - * group. More precisely, for condition (i) to hold because of - * such a group, it is not even necessary that the group is - * (still) active: it is sufficient that, even if the group - * has become inactive, some of its descendant processes still - * have some request already dispatched but still waiting for - * completion. In fact, requests have still to be guaranteed - * their share of the throughput even after being - * dispatched. In this respect, it is easy to show that, if a - * group frequently becomes inactive while still having - * in-flight requests, and if, when this happens, the group is - * not considered in the calculation of whether the scenario - * is asymmetric, then the group may fail to be guaranteed its - * fair share of the throughput (basically because idling may - * not be performed for the descendant processes of the group, - * but it had to be). We address this issue with the - * following bi-modal behavior, implemented in the function - * bfq_symmetric_scenario(). - * - * If there are groups with requests waiting for completion - * (as commented above, some of these groups may even be - * already inactive), then the scenario is tagged as - * asymmetric, conservatively, without checking any of the - * conditions (i) and (ii). So the device is idled for bfqq. - * This behavior matches also the fact that groups are created - * exactly if controlling I/O is a primary concern (to - * preserve bandwidth and latency guarantees). - * - * On the opposite end, if there are no groups with requests - * waiting for completion, then only condition (i) is actually - * controlled, i.e., provided that condition (i) holds, idling - * is not performed, regardless of whether condition (ii) - * holds. In other words, only if condition (i) does not hold, - * then idling is allowed, and the device tends to be - * prevented from queueing many requests, possibly of several - * processes. Since there are no groups with requests waiting - * for completion, then, to control condition (i) it is enough - * to check just whether all the queues with requests waiting - * for completion also have the same weight. - * - * Not checking condition (ii) evidently exposes bfqq to the - * risk of getting less throughput than its fair share. - * However, for queues with the same weight, a further - * mechanism, preemption, mitigates or even eliminates this - * problem. And it does so without consequences on overall - * throughput. This mechanism and its benefits are explained - * in the next three paragraphs. - * - * Even if a queue, say Q, is expired when it remains idle, Q - * can still preempt the new in-service queue if the next - * request of Q arrives soon (see the comments on - * bfq_bfqq_update_budg_for_activation). If all queues and - * groups have the same weight, this form of preemption, - * combined with the hole-recovery heuristic described in the - * comments on function bfq_bfqq_update_budg_for_activation, - * are enough to preserve a correct bandwidth distribution in - * the mid term, even without idling. In fact, even if not - * idling allows the internal queues of the device to contain - * many requests, and thus to reorder requests, we can rather - * safely assume that the internal scheduler still preserves a - * minimum of mid-term fairness. - * - * More precisely, this preemption-based, idleless approach - * provides fairness in terms of IOPS, and not sectors per - * second. This can be seen with a simple example. Suppose - * that there are two queues with the same weight, but that - * the first queue receives requests of 8 sectors, while the - * second queue receives requests of 1024 sectors. In - * addition, suppose that each of the two queues contains at - * most one request at a time, which implies that each queue - * always remains idle after it is served. Finally, after - * remaining idle, each queue receives very quickly a new - * request. It follows that the two queues are served - * alternatively, preempting each other if needed. This - * implies that, although both queues have the same weight, - * the queue with large requests receives a service that is - * 1024/8 times as high as the service received by the other - * queue. - * - * The motivation for using preemption instead of idling (for - * queues with the same weight) is that, by not idling, - * service guarantees are preserved (completely or at least in - * part) without minimally sacrificing throughput. And, if - * there is no active group, then the primary expectation for - * this device is probably a high throughput. - * - * We are now left only with explaining the additional - * compound condition that is checked below for deciding - * whether the scenario is asymmetric. To explain this - * compound condition, we need to add that the function - * bfq_symmetric_scenario checks the weights of only - * non-weight-raised queues, for efficiency reasons (see - * comments on bfq_weights_tree_add()). Then the fact that - * bfqq is weight-raised is checked explicitly here. More - * precisely, the compound condition below takes into account - * also the fact that, even if bfqq is being weight-raised, - * the scenario is still symmetric if all queues with requests - * waiting for completion happen to be - * weight-raised. Actually, we should be even more precise - * here, and differentiate between interactive weight raising - * and soft real-time weight raising. - * - * As a side note, it is worth considering that the above - * device-idling countermeasures may however fail in the - * following unlucky scenario: if idling is (correctly) - * disabled in a time period during which all symmetry - * sub-conditions hold, and hence the device is allowed to - * enqueue many requests, but at some later point in time some - * sub-condition stops to hold, then it may become impossible - * to let requests be served in the desired order until all - * the requests already queued in the device have been served. - */ - bool asymmetric_scenario = (bfqq->wr_coeff > 1 && - bfqd->wr_busy_queues < - bfq_tot_busy_queues(bfqd)) || + return (bfqq->wr_coeff > 1 && + bfqd->wr_busy_queues < + bfq_tot_busy_queues(bfqd)) || !bfq_symmetric_scenario(bfqd); - - /* - * Finally, there is a case where maximizing throughput is the - * best choice even if it may cause unfairness toward - * bfqq. Such a case is when bfqq became active in a burst of - * queue activations. Queues that became active during a large - * burst benefit only from throughput, as discussed in the - * comments on bfq_handle_burst. Thus, if bfqq became active - * in a burst and not idling the device maximizes throughput, - * then the device must no be idled, because not idling the - * device provides bfqq and all other queues in the burst with - * maximum benefit. Combining this and the above case, we can - * now establish when idling is actually needed to preserve - * service guarantees. - */ - return asymmetric_scenario && !bfq_bfqq_in_large_burst(bfqq); } /* |