summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2012-02-11 00:40:34 +0400
committerOlof Johansson <olof@lixom.net>2012-02-11 00:40:34 +0400
commit082f53c2f573c75a8f1610c587a43b6817e20f90 (patch)
treec3ad3a58967e7f7f61ff12ff59284dba1e76d093 /arch
parente69128b947da0a2474447868f73c76311e2baedb (diff)
parentb024e33682c8e56cc8e869245dabd1b91ffe00ea (diff)
downloadlinux-082f53c2f573c75a8f1610c587a43b6817e20f90.tar.xz
Merge branch 'for-arm-soc' of git://sources.calxeda.com/kernel/linux into next/soc
* 'for-arm-soc' of git://sources.calxeda.com/kernel/linux: (247 commits) ARM: highbank: remove unused memory.h ARM: highbank: enable sp804 based sched_clock ARM: timer-sp: add sched_clock support Linux 3.3-rc3 pcmcia: fix socket refcount decrementing on each resume mm: fix UP THP spin_is_locked BUGs drivers/leds/leds-lm3530.c: fix setting pltfm->als_vmax mm: compaction: check for overlapping nodes during isolation for migration nilfs2: avoid overflowing segment numbers in nilfs_ioctl_clean_segments() ASoC: wm8994: Disable line output discharge prior to ramping VMID ASoC: wm8994: Fix typo in VMID ramp setting ALSA: oxygen, virtuoso: fix exchanged L/R volumes of aux and CD inputs ALSA: usb-audio: add Edirol UM-3G support checkpatch: Warn on code with 6+ tab indentation ACPI: remove duplicated lines of merging problems with acpi_processor_add ALSA: hda - add support for Uniwill ECS M31EI notebook HID: wiimote: fix invalid power_supply_powers call ALSA: hda - Fix error handling in patch_ca0132.c target: Fix unsupported WRITE_SAME sense payload iscsi: use IP_FREEBIND socket option ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/common/timer-sp.c17
-rw-r--r--arch/arm/include/asm/hardware/timer-sp.h15
-rw-r--r--arch/arm/include/asm/tlb.h10
-rw-r--r--arch/arm/kernel/entry-armv.S2
-rw-r--r--arch/arm/kernel/perf_event_v7.c28
-rw-r--r--arch/arm/kernel/ptrace.c8
-rw-r--r--arch/arm/kernel/signal.c5
-rw-r--r--arch/arm/mach-bcmring/arch.c2
-rw-r--r--arch/arm/mach-bcmring/dma.c812
-rw-r--r--arch/arm/mach-bcmring/include/mach/dma.h196
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm365-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c2
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c2
-rw-r--r--arch/arm/mach-davinci/board-omapl138-hawk.c2
-rw-r--r--arch/arm/mach-davinci/board-sffsdr.c2
-rw-r--r--arch/arm/mach-davinci/da850.c32
-rw-r--r--arch/arm/mach-highbank/highbank.c2
-rw-r--r--arch/arm/mach-highbank/include/mach/memory.h1
-rw-r--r--arch/arm/mach-omap2/Kconfig11
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c18
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c18
-rw-r--r--arch/arm/mach-omap2/devices.c1
-rw-r--r--arch/arm/mach-omap2/display.c4
-rw-r--r--arch/arm/mach-omap2/gpmc.c6
-rw-r--r--arch/arm/mach-omap2/hsmmc.c16
-rw-r--r--arch/arm/mach-omap2/io.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c21
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c22
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c54
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/prm2xxx_3xxx.c1
-rw-r--r--arch/arm/mach-omap2/smartreflex.c2
-rw-r--r--arch/arm/mach-omap2/timer.c2
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c2
-rw-r--r--arch/arm/mm/ioremap.c3
-rw-r--r--arch/avr32/Kconfig1
-rw-r--r--arch/microblaze/kernel/setup.c21
-rw-r--r--arch/mips/Kconfig1
-rw-r--r--arch/mips/lib/iomap-pci.c4
-rw-r--r--arch/sh/Kconfig1
-rw-r--r--arch/sh/drivers/pci/pci.c4
-rw-r--r--arch/sparc/Kconfig1
-rw-r--r--arch/sparc/lib/divdi3.S16
-rw-r--r--arch/x86/include/asm/cmpxchg.h6
-rw-r--r--arch/x86/include/asm/kvm_emulate.h16
-rw-r--r--arch/x86/kernel/dumpstack.c3
-rw-r--r--arch/x86/kernel/dumpstack_64.c8
-rw-r--r--arch/x86/kernel/reboot.c36
-rw-r--r--arch/x86/kvm/emulate.c51
-rw-r--r--arch/x86/kvm/x86.c45
-rw-r--r--arch/x86/mm/fault.c4
-rw-r--r--arch/xtensa/include/asm/string.h3
55 files changed, 372 insertions, 1181 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 92c9c79c140c..7a5436ef9397 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1127,6 +1127,7 @@ config PLAT_VERSATILE
config ARM_TIMER_SP804
bool
select CLKSRC_MMIO
+ select HAVE_SCHED_CLOCK
source arch/arm/mm/Kconfig
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 8794a34eae61..df13a3ffff35 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -26,6 +26,7 @@
#include <linux/irq.h>
#include <linux/io.h>
+#include <asm/sched_clock.h>
#include <asm/hardware/arm_timer.h>
static long __init sp804_get_clock_rate(const char *name)
@@ -67,7 +68,16 @@ static long __init sp804_get_clock_rate(const char *name)
return rate;
}
-void __init sp804_clocksource_init(void __iomem *base, const char *name)
+static void __iomem *sched_clock_base;
+
+static u32 sp804_read(void)
+{
+ return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
+}
+
+void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
+ const char *name,
+ int use_sched_clock)
{
long rate = sp804_get_clock_rate(name);
@@ -83,6 +93,11 @@ void __init sp804_clocksource_init(void __iomem *base, const char *name)
clocksource_mmio_init(base + TIMER_VALUE, name,
rate, 200, 32, clocksource_mmio_readl_down);
+
+ if (use_sched_clock) {
+ sched_clock_base = base;
+ setup_sched_clock(sp804_read, 32, rate);
+ }
}
diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h
index 4384d81eee79..2dd9d3f83f29 100644
--- a/arch/arm/include/asm/hardware/timer-sp.h
+++ b/arch/arm/include/asm/hardware/timer-sp.h
@@ -1,2 +1,15 @@
-void sp804_clocksource_init(void __iomem *, const char *);
+void __sp804_clocksource_and_sched_clock_init(void __iomem *,
+ const char *, int);
+
+static inline void sp804_clocksource_init(void __iomem *base, const char *name)
+{
+ __sp804_clocksource_and_sched_clock_init(base, name, 0);
+}
+
+static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
+ const char *name)
+{
+ __sp804_clocksource_and_sched_clock_init(base, name, 1);
+}
+
void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 5d3ed7e38561..314d4664eae7 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long addr)
{
pgtable_page_dtor(pte);
- tlb_add_flush(tlb, addr);
+
+ /*
+ * With the classic ARM MMU, a pte page has two corresponding pmd
+ * entries, each covering 1MB.
+ */
+ addr &= PMD_MASK;
+ tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
+ tlb_add_flush(tlb, addr + SZ_1M);
+
tlb_remove_page(tlb, pte);
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3a456c6c7005..be16a48007b4 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -790,7 +790,7 @@ __kuser_cmpxchg64: @ 0xffff0f60
smp_dmb arm
rsbs r0, r3, #0 @ set returned val and C flag
ldmfd sp!, {r4, r5, r6, r7}
- bx lr
+ usr_ret lr
#elif !defined(CONFIG_SMP)
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 460bbbb6b885..6933244c68f9 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
@@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index e1d5e1929fbd..e33870ff0ac0 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -699,10 +699,13 @@ static int vfp_set(struct task_struct *target,
{
int ret;
struct thread_info *thread = task_thread_info(target);
- struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+ struct vfp_hard_struct new_vfp;
const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+ vfp_sync_hwstate(thread);
+ new_vfp = thread->vfpstate.hard;
+
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&new_vfp.fpregs,
user_fpregs_offset,
@@ -723,9 +726,8 @@ static int vfp_set(struct task_struct *target,
if (ret)
return ret;
- vfp_sync_hwstate(thread);
- thread->vfpstate.hard = new_vfp;
vfp_flush_hwstate(thread);
+ thread->vfpstate.hard = new_vfp;
return 0;
}
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 0340224cf73c..9e617bd4a146 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
+ vfp_flush_hwstate(thread);
+
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
@@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
- if (!err)
- vfp_flush_hwstate(thread);
-
return err ? -EFAULT : 0;
}
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 9e5e7552498c..45c97b1ee9b1 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING")
.init_early = bcmring_init_early,
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
- .init_machine = bcmring_init_machine
+ .init_machine = bcmring_init_machine,
.restart = bcmring_restart,
MACHINE_END
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 1a1a27dd5654..1024396797e1 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -33,17 +33,11 @@
#include <mach/timer.h>
-#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
#include <linux/sched.h>
#include <mach/dma.h>
-/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
-/* especially since dc4 doesn't use kmalloc'd memory. */
-
-#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
-
/* ---- Public Variables ------------------------------------------------- */
/* ---- Private Constants and Types -------------------------------------- */
@@ -53,24 +47,12 @@
#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
-#define DMA_MAP_DEBUG 0
-
-#if DMA_MAP_DEBUG
-# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
-#else
-# define DMA_MAP_PRINT(fmt, args...)
-#endif
/* ---- Private Variables ------------------------------------------------ */
static DMA_Global_t gDMA;
static struct proc_dir_entry *gDmaDir;
-static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
-
#include "dma_device.c"
/* ---- Private Function Prototypes -------------------------------------- */
@@ -79,34 +61,6 @@ static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
/****************************************************************************/
/**
-* Displays information for /proc/dma/mem-type
-*/
-/****************************************************************************/
-
-static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf(buf + len, "dma_map_mem statistics\n");
- len +=
- sprintf(buf + len, "coherent: %d\n",
- atomic_read(&gDmaStatMemTypeCoherent));
- len +=
- sprintf(buf + len, "kmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeKmalloc));
- len +=
- sprintf(buf + len, "vmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeVmalloc));
- len +=
- sprintf(buf + len, "user: %d\n",
- atomic_read(&gDmaStatMemTypeUser));
-
- return len;
-}
-
-/****************************************************************************/
-/**
* Displays information for /proc/dma/channels
*/
/****************************************************************************/
@@ -846,8 +800,6 @@ int dma_init(void)
dma_proc_read_channels, NULL);
create_proc_read_entry("devices", 0, gDmaDir,
dma_proc_read_devices, NULL);
- create_proc_read_entry("mem-type", 0, gDmaDir,
- dma_proc_read_mem_type, NULL);
}
out:
@@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for.
}
EXPORT_SYMBOL(dma_set_device_handler);
-
-/****************************************************************************/
-/**
-* Initializes a memory mapping structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap)
-{
- memset(memMap, 0, sizeof(*memMap));
-
- sema_init(&memMap->lock, 1);
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_init_mem_map);
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap)
-{
- down(&memMap->lock); /* Just being paranoid */
-
- /* Free up any allocated memory */
-
- up(&memMap->lock);
- memset(memMap, 0, sizeof(*memMap));
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_term_mem_map);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr)
-{
- unsigned long addrVal = (unsigned long)addr;
-
- if (addrVal >= CONSISTENT_BASE) {
- /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
-
- /* dma_alloc_xxx pages are physically and virtually contiguous */
-
- return DMA_MEM_TYPE_DMA;
- }
-
- /* Technically, we could add one more classification. Addresses between VMALLOC_END */
- /* and the beginning of the DMA virtual address could be considered to be I/O space. */
- /* Right now, nobody cares about this particular classification, so we ignore it. */
-
- if (is_vmalloc_addr(addr)) {
- /* Address comes from the vmalloc'd region. Pages are virtually */
- /* contiguous but NOT physically contiguous */
-
- return DMA_MEM_TYPE_VMALLOC;
- }
-
- if (addrVal >= PAGE_OFFSET) {
- /* PAGE_OFFSET is typically 0xC0000000 */
-
- /* kmalloc'd pages are physically contiguous */
-
- return DMA_MEM_TYPE_KMALLOC;
- }
-
- return DMA_MEM_TYPE_USER;
-}
-
-EXPORT_SYMBOL(dma_mem_type);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr)
-{
- DMA_MemType_t memType = dma_mem_type(addr);
-
- return (memType == DMA_MEM_TYPE_DMA)
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- || (memType == DMA_MEM_TYPE_KMALLOC)
-#endif
- || (memType == DMA_MEM_TYPE_USER);
-}
-
-EXPORT_SYMBOL(dma_mem_supports_dma);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap: %p\n", memMap);
-
- if (memMap->inUse) {
- printk(KERN_ERR "%s: memory map %p is already being used\n",
- __func__, memMap);
- rc = -EBUSY;
- goto out;
- }
-
- memMap->inUse = 1;
- memMap->dir = dir;
- memMap->numRegionsUsed = 0;
-
- rc = 0;
-
-out:
-
- DMA_MAP_PRINT("returning %d", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_start);
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map. Each segment is both
-* physically and virtually contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
- DMA_Region_t *region, /* Region that the segment belongs to */
- void *virtAddr, /* Virtual address of the segment being added */
- dma_addr_t physAddr, /* Physical address of the segment being added */
- size_t numBytes /* Number of bytes of the segment being added */
- ) {
- DMA_Segment_t *segment;
-
- DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
- physAddr, numBytes);
-
- /* Sanity check */
-
- if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
- || (((unsigned long)virtAddr + numBytes)) >
- ((unsigned long)region->virtAddr + region->numBytes)) {
- printk(KERN_ERR
- "%s: virtAddr %p is outside region @ %p len: %d\n",
- __func__, virtAddr, region->virtAddr, region->numBytes);
- return -EINVAL;
- }
-
- if (region->numSegmentsUsed > 0) {
- /* Check to see if this segment is physically contiguous with the previous one */
-
- segment = &region->segment[region->numSegmentsUsed - 1];
-
- if ((segment->physAddr + segment->numBytes) == physAddr) {
- /* It is - just add on to the end */
-
- DMA_MAP_PRINT("appending %d bytes to last segment\n",
- numBytes);
-
- segment->numBytes += numBytes;
-
- return 0;
- }
- }
-
- /* Reallocate to hold more segments, if required. */
-
- if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
- DMA_Segment_t *newSegment;
- size_t oldSize =
- region->numSegmentsAllocated * sizeof(*newSegment);
- int newAlloc = region->numSegmentsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newSegment);
-
- newSegment = kmalloc(newSize, GFP_KERNEL);
- if (newSegment == NULL) {
- return -ENOMEM;
- }
- memcpy(newSegment, region->segment, oldSize);
- memset(&((uint8_t *) newSegment)[oldSize], 0,
- newSize - oldSize);
- kfree(region->segment);
-
- region->numSegmentsAllocated = newAlloc;
- region->segment = newSegment;
- }
-
- segment = &region->segment[region->numSegmentsUsed];
- region->numSegmentsUsed++;
-
- segment->virtAddr = virtAddr;
- segment->physAddr = physAddr;
- segment->numBytes = numBytes;
-
- DMA_MAP_PRINT("returning success\n");
-
- return 0;
-}
-
-/****************************************************************************/
-/**
-* Adds a region of memory to a memory map. Each region is virtually
-* contiguous, but not necessarily physically contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- ) {
- unsigned long addr = (unsigned long)mem;
- unsigned int offset;
- int rc = 0;
- DMA_Region_t *region;
- dma_addr_t physAddr;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
-
- if (!memMap->inUse) {
- printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- /* Reallocate to hold more regions. */
-
- if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
- DMA_Region_t *newRegion;
- size_t oldSize =
- memMap->numRegionsAllocated * sizeof(*newRegion);
- int newAlloc = memMap->numRegionsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newRegion);
-
- newRegion = kmalloc(newSize, GFP_KERNEL);
- if (newRegion == NULL) {
- rc = -ENOMEM;
- goto out;
- }
- memcpy(newRegion, memMap->region, oldSize);
- memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
-
- kfree(memMap->region);
-
- memMap->numRegionsAllocated = newAlloc;
- memMap->region = newRegion;
- }
-
- region = &memMap->region[memMap->numRegionsUsed];
- memMap->numRegionsUsed++;
-
- offset = addr & ~PAGE_MASK;
-
- region->memType = dma_mem_type(mem);
- region->virtAddr = mem;
- region->numBytes = numBytes;
- region->numSegmentsUsed = 0;
- region->numLockedPages = 0;
- region->lockedPages = NULL;
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeVmalloc);
-
- /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
-
- /* vmalloc'd pages are not physically contiguous */
-
- rc = -EINVAL;
- break;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeKmalloc);
-
- /* kmalloc'd pages are physically contiguous, so they'll have exactly */
- /* one segment */
-
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- physAddr =
- dma_map_single(NULL, mem, numBytes, memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
-#else
- rc = -EINVAL;
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- /* dma_alloc_xxx pages are physically contiguous */
-
- atomic_inc(&gDmaStatMemTypeCoherent);
-
- physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
-
- dma_sync_single_for_cpu(NULL, physAddr, numBytes,
- memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- size_t firstPageOffset;
- size_t firstPageSize;
- struct page **pages;
- struct task_struct *userTask;
-
- atomic_inc(&gDmaStatMemTypeUser);
-
-#if 1
- /* If the pages are user pages, then the dma_mem_map_set_user_task function */
- /* must have been previously called. */
-
- if (memMap->userTask == NULL) {
- printk(KERN_ERR
- "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
- __func__);
- return -EINVAL;
- }
-
- /* User pages need to be locked. */
-
- firstPageOffset =
- (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
- firstPageSize = PAGE_SIZE - firstPageOffset;
-
- region->numLockedPages = (firstPageOffset
- + region->numBytes +
- PAGE_SIZE - 1) / PAGE_SIZE;
- pages =
- kmalloc(region->numLockedPages *
- sizeof(struct page *), GFP_KERNEL);
-
- if (pages == NULL) {
- region->numLockedPages = 0;
- return -ENOMEM;
- }
-
- userTask = memMap->userTask;
-
- down_read(&userTask->mm->mmap_sem);
- rc = get_user_pages(userTask, /* task */
- userTask->mm, /* mm */
- (unsigned long)region->virtAddr, /* start */
- region->numLockedPages, /* len */
- memMap->dir == DMA_FROM_DEVICE, /* write */
- 0, /* force */
- pages, /* pages (array of pointers to page) */
- NULL); /* vmas */
- up_read(&userTask->mm->mmap_sem);
-
- if (rc != region->numLockedPages) {
- kfree(pages);
- region->numLockedPages = 0;
-
- if (rc >= 0) {
- rc = -EINVAL;
- }
- } else {
- uint8_t *virtAddr = region->virtAddr;
- size_t bytesRemaining;
- int pageIdx;
-
- rc = 0; /* Since get_user_pages returns +ve number */
-
- region->lockedPages = pages;
-
- /* We've locked the user pages. Now we need to walk them and figure */
- /* out the physical addresses. */
-
- /* The first page may be partial */
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages[0])) +
- firstPageOffset,
- firstPageSize);
-
- virtAddr += firstPageSize;
- bytesRemaining =
- region->numBytes - firstPageSize;
-
- for (pageIdx = 1;
- pageIdx < region->numLockedPages;
- pageIdx++) {
- size_t bytesThisPage =
- (bytesRemaining >
- PAGE_SIZE ? PAGE_SIZE :
- bytesRemaining);
-
- DMA_MAP_PRINT
- ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
- pageIdx, pages[pageIdx],
- page_to_pfn(pages[pageIdx]),
- PFN_PHYS(page_to_pfn
- (pages[pageIdx])));
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages
- [pageIdx])),
- bytesThisPage);
-
- virtAddr += bytesThisPage;
- bytesRemaining -= bytesThisPage;
- }
- }
-#else
- printk(KERN_ERR
- "%s: User mode pages are not yet supported\n",
- __func__);
-
- /* user pages are not physically contiguous */
-
- rc = -EINVAL;
-#endif
- break;
- }
-
- default:
- {
- printk(KERN_ERR "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
-
- rc = -EINVAL;
- break;
- }
- }
-
- if (rc != 0) {
- memMap->numRegionsUsed--;
- }
-
-out:
-
- DMA_MAP_PRINT("returning %d\n", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_add_segment);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- rc = dma_map_start(memMap, dir);
- if (rc == 0) {
- rc = dma_map_add_region(memMap, mem, numBytes);
- if (rc < 0) {
- /* Since the add fails, this function will fail, and the caller won't */
- /* call unmap, so we need to do it here. */
-
- dma_unmap(memMap, 0);
- }
- }
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_mem);
-
-/****************************************************************************/
-/**
-* Setup a descriptor ring for a given memory map.
-*
-* It is assumed that the descriptor ring has already been initialized, and
-* this routine will only reallocate a new descriptor ring if the existing
-* one is too small.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- ) {
- int rc;
- int numDescriptors;
- DMA_DeviceAttribute_t *devAttr;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
- dma_addr_t srcPhysAddr;
- dma_addr_t dstPhysAddr;
- int regionIdx;
- int segmentIdx;
-
- devAttr = &DMA_gDeviceAttribute[dev];
-
- down(&memMap->lock);
-
- /* Figure out how many descriptors we need */
-
- numDescriptors = 0;
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = &region->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_calculate_descriptor_count(dev, srcPhysAddr,
- dstPhysAddr,
- segment->
- numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_calculate_descriptor_count failed: %d\n",
- __func__, rc);
- goto out;
- }
- numDescriptors += rc;
- }
- }
-
- /* Adjust the size of the ring, if it isn't big enough */
-
- if (numDescriptors > devAttr->ring.descriptorsAllocated) {
- dma_free_descriptor_ring(&devAttr->ring);
- rc =
- dma_alloc_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_alloc_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- } else {
- rc =
- dma_init_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_init_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
-
- /* Populate the descriptors */
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = &region->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_add_descriptors(&devAttr->ring, dev,
- srcPhysAddr, dstPhysAddr,
- segment->numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_add_descriptors failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
- }
-
- rc = 0;
-
-out:
-
- up(&memMap->lock);
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_create_descriptor_ring);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- ) {
-
- int rc = 0;
- int regionIdx;
- int segmentIdx;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
-
- down(&memMap->lock);
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = &region->segment[segmentIdx];
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- printk(KERN_ERR
- "%s: vmalloc'd pages are not yet supported\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- dma_unmap_single(NULL,
- segment->physAddr,
- segment->numBytes,
- memMap->dir);
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- dma_sync_single_for_cpu(NULL,
- segment->
- physAddr,
- segment->
- numBytes,
- memMap->dir);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- /* Nothing to do here. */
-
- break;
- }
-
- default:
- {
- printk(KERN_ERR
- "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
- rc = -EINVAL;
- goto out;
- }
- }
-
- segment->virtAddr = NULL;
- segment->physAddr = 0;
- segment->numBytes = 0;
- }
-
- if (region->numLockedPages > 0) {
- int pageIdx;
-
- /* Some user pages were locked. We need to go and unlock them now. */
-
- for (pageIdx = 0; pageIdx < region->numLockedPages;
- pageIdx++) {
- struct page *page =
- region->lockedPages[pageIdx];
-
- if (memMap->dir == DMA_FROM_DEVICE) {
- SetPageDirty(page);
- }
- page_cache_release(page);
- }
- kfree(region->lockedPages);
- region->numLockedPages = 0;
- region->lockedPages = NULL;
- }
-
- region->memType = DMA_MEM_TYPE_NONE;
- region->virtAddr = NULL;
- region->numBytes = 0;
- region->numSegmentsUsed = 0;
- }
- memMap->userTask = NULL;
- memMap->numRegionsUsed = 0;
- memMap->inUse = 0;
-
-out:
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 1f2c5319c056..72543781207b 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -26,15 +26,9 @@
/* ---- Include Files ---------------------------------------------------- */
#include <linux/kernel.h>
-#include <linux/wait.h>
#include <linux/semaphore.h>
#include <csp/dmacHw.h>
#include <mach/timer.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
/* ---- Constants and Types ---------------------------------------------- */
@@ -113,78 +107,6 @@ typedef struct {
/****************************************************************************
*
-* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
-* DMA chains from a variety of memory sources.
-*
-*****************************************************************************/
-
-#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
- /* off not being DMA'd. */
-
-typedef enum {
- DMA_MEM_TYPE_NONE, /* Not a valid setting */
- DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
- DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
- DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
- DMA_MEM_TYPE_USER, /* Memory came from user space. */
-
-} DMA_MemType_t;
-
-/* A segment represents a physically and virtually contiguous chunk of memory. */
-/* i.e. each segment can be DMA'd */
-/* A user of the DMA code will add memory regions. Each region may need to be */
-/* represented by one or more segments. */
-
-typedef struct {
- void *virtAddr; /* Virtual address used for this segment */
- dma_addr_t physAddr; /* Physical address this segment maps to */
- size_t numBytes; /* Size of the segment, in bytes */
-
-} DMA_Segment_t;
-
-/* A region represents a virtually contiguous chunk of memory, which may be */
-/* made up of multiple segments. */
-
-typedef struct {
- DMA_MemType_t memType;
- void *virtAddr;
- size_t numBytes;
-
- /* Each region (virtually contiguous) consists of one or more segments. Each */
- /* segment is virtually and physically contiguous. */
-
- int numSegmentsUsed;
- int numSegmentsAllocated;
- DMA_Segment_t *segment;
-
- /* When a region corresponds to user memory, we need to lock all of the pages */
- /* down before we can figure out the physical addresses. The lockedPage array contains */
- /* the pages that were locked, and which subsequently need to be unlocked once the */
- /* memory is unmapped. */
-
- unsigned numLockedPages;
- struct page **lockedPages;
-
-} DMA_Region_t;
-
-typedef struct {
- int inUse; /* Is this mapping currently being used? */
- struct semaphore lock; /* Acquired when using this structure */
- enum dma_data_direction dir; /* Direction this transfer is intended for */
-
- /* In the event that we're mapping user memory, we need to know which task */
- /* the memory is for, so that we can obtain the correct mm locks. */
-
- struct task_struct *userTask;
-
- int numRegionsUsed;
- int numRegionsAllocated;
- DMA_Region_t *region;
-
-} DMA_MemMap_t;
-
-/****************************************************************************
-*
* The DMA_DeviceAttribute_t contains information which describes a
* particular DMA device (or peripheral).
*
@@ -570,124 +492,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
/****************************************************************************/
/**
-* Initializes a DMA_MemMap_t data structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr);
-
-/****************************************************************************/
-/**
-* Sets the process (aka userTask) associated with a mem map. This is
-* required if user-mode segments will be added to the mapping.
-*/
-/****************************************************************************/
-
-static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
- struct task_struct *task)
-{
- memMap->userTask = task;
-}
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr);
-
-/****************************************************************************/
-/**
-* Initializes a memory map for use. Since this function acquires a
-* sempaphore within the memory map, it is VERY important that dma_unmap
-* be called when you're finished using the map.
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- );
-
-/****************************************************************************/
-/**
-* Creates a descriptor ring from a memory mapping.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *addr, /* Virtual address that we want to get a map of */
- size_t count, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- );
-
-/****************************************************************************/
-/**
* Initiates a transfer when the descriptors have already been setup.
*
* This is a special case, and normally, the dma_transfer_xxx functions should
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6b22b543a83f..d5088900af6c 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -44,7 +44,7 @@
#include <mach/aemif.h>
#include <mach/spi.h>
-#define DA850_EVM_PHY_ID "0:00"
+#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 346e1de2f5a8..849311d3cb7c 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -54,7 +54,7 @@ static inline int have_tvp7002(void)
return 0;
}
-#define DM365_EVM_PHY_ID "0:01"
+#define DM365_EVM_PHY_ID "davinci_mdio-0:01"
/*
* A MAX-II CPLD is used for various board control functions.
*/
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index a64b49cfedca..1247ecdcf752 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -40,7 +40,7 @@
#include <mach/usb.h>
#include <mach/aemif.h>
-#define DM644X_EVM_PHY_ID "0:01"
+#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 64017558860b..872ac69fa049 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
-#define DM646X_EVM_PHY_ID "0:01"
+#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6c4a16415d47..8d34f513d415 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -39,7 +39,7 @@
#include <mach/mmc.h>
#include <mach/usb.h>
-#define NEUROS_OSD2_PHY_ID "0:01"
+#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index e7c0c7c53493..45e815760a27 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -21,7 +21,7 @@
#include <mach/da8xx.h>
#include <mach/mux.h>
-#define HAWKBOARD_PHY_ID "0:07"
+#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 0b136a831c59..31da3c5b2ba3 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -42,7 +42,7 @@
#include <mach/mux.h>
#include <mach/usb.h>
-#define SFFSDR_PHY_ID "0:01"
+#define SFFSDR_PHY_ID "davinci_mdio-0:01"
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 0ed7fdb64efb..992c4c410185 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = {
.div_reg = PLLDIV3,
};
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
- .name = "pll0_sysclk6",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
- .name = "pll1_sysclk7",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
static struct clk i2c0_clk = {
.name = "i2c0",
.parent = &pll0_aux_clk,
@@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
- CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
- CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
- CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
CLK("i2c_davinci.1", NULL, &i2c0_clk),
CLK(NULL, "timer0", &timerp64_0_clk),
CLK("watchdog", NULL, &timerp64_1_clk),
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8394d512a402..a96183e73fad 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -109,7 +109,7 @@ static void __init highbank_timer_init(void)
highbank_clocks_init();
- sp804_clocksource_init(timer_base + 0x20, "timer1");
+ sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
sp804_clockevents_init(timer_base, irq, "timer0");
}
diff --git a/arch/arm/mach-highbank/include/mach/memory.h b/arch/arm/mach-highbank/include/mach/memory.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-highbank/include/mach/memory.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 41e6612ecbaf..d965da45160e 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -213,13 +213,12 @@ config MACH_OMAP3_PANDORA
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
- select BACKLIGHT_CLASS_DEVICE
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
@@ -265,7 +264,7 @@ config MACH_OMAP_ZOOM2
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -275,7 +274,7 @@ config MACH_OMAP_ZOOM3
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
@@ -334,7 +333,7 @@ config MACH_OMAP_4430SDP
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP4_PANDA
bool "OMAP4 Panda Board"
@@ -342,7 +341,7 @@ config MACH_OMAP4_PANDA
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
- select REGULATOR_FIXED_VOLTAGE
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 39fba9df17fb..21fc87648660 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -52,8 +52,9 @@
#define ETH_KS8851_QUART 138
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
#define OMAP4_SFH7741_ENABLE_GPIO 188
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
#define DLP_POWER_ON_GPIO 40
@@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void)
}
static struct gpio sdp4430_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
@@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
}
static struct nokia_dsi_panel_data dsi1_panel = {
@@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void)
pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
}
+static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
@@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = {
.platform_enable = sdp4430_panel_enable_hdmi,
.platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &sdp4430_hdmi_data,
};
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
@@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 30ad40db2cf3..b7779c206a90 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -51,8 +51,9 @@
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
static int wl1271_gpios[] = {46, -1, -1};
@@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void)
}
static struct gpio panda_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
@@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
}
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
@@ -442,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = {
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
@@ -473,6 +479,10 @@ void omap4_panda_display_init(void)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
static void __init omap4_panda_init(void)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 0b510ad01a00..283d11eae693 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
break;
default:
pr_err("Invalid McSPI Revision value\n");
+ kfree(pdata);
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 3c446d1a1781..3677b1f58b85 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
u32 reg;
u16 control_i2c_1;
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_cec",
OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
omap_mux_init_signal("hdmi_ddc_scl",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_ddc_sda",
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 130034bf01d5..dfffbbf4c009 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
case GPMC_CONFIG_DEV_SIZE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ /* clear 2 target bits */
+ regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
+
+ /* set the proper value */
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index bd844af13af5..ad0adb5a1e0e 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
{
u32 reg;
- if (mmc->slots[0].internal_clock) {
- reg = omap_ctrl_readl(control_devconf1_offset);
+ reg = omap_ctrl_readl(control_devconf1_offset);
+ if (mmc->slots[0].internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
- }
+ else
+ reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
+ omap_ctrl_writel(reg, control_devconf1_offset);
}
-static void hsmmc23_before_set_reg(struct device *dev, int slot,
+static void hsmmc2_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
@@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
- /* FALLTHROUGH */
- case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+ mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
mmc->slots[0].after_set_reg = NULL;
}
break;
+ case 3:
case 4:
case 5:
mmc->slots[0].before_set_reg = NULL;
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3f174d51f67f..eb50c29fb644 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void)
omap_pm_if_early_init();
}
-#ifdef CONFIG_ARCH_OMAP2
+#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
omap2_set_globals_242x();
@@ -400,7 +400,9 @@ void __init omap2420_init_early(void)
omap_hwmod_init_postsetup();
omap2420_clk_init();
}
+#endif
+#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
omap2_set_globals_243x();
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
index c11273da5dcc..f08e442af397 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
@@ -56,27 +56,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = {
};
/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-struct omap_hwmod_class omap2_dispc_hwmod_class = {
- .name = "dispc",
- .sysc = &omap2_dispc_sysc,
-};
-
-/*
* 'rfbi' class
* remote frame buffer interface
*/
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index 177dee20faef..2a6729741b06 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
{ .name = "dispc", .dma_req = 5 },
{ .dma_req = -1 }
};
+
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap2_dispc_sysc,
+};
+
/* OMAP2xxx Timer Common */
static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
.rev_offs = 0x0000,
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 5324e8d93bc0..3c8dd928628e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
};
+/*
+ * 'dispc' class
+ * display controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSC_HAS_ENAWAKEUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap3_dispc_sysc,
+};
+
/* l4_core -> dss_dispc */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
.master = &omap3xxx_l4_core_hwmod,
@@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
- .class = &omap2_dispc_hwmod_class,
+ .class = &omap3_dispc_hwmod_class,
.mpu_irqs = omap2_dispc_irqs,
.main_clk = "dss1_alwon_fck",
.prcm = {
@@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- /* dss class */
- &omap3xxx_dss_dispc_hwmod,
- &omap3xxx_dss_dsi1_hwmod,
- &omap3xxx_dss_rfbi_hwmod,
- &omap3xxx_dss_venc_hwmod,
-
/* i2c class */
&omap3xxx_i2c1_hwmod,
&omap3xxx_i2c2_hwmod,
@@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = {
NULL
};
+static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
+ /* dss class */
+ &omap3xxx_dss_dispc_hwmod,
+ &omap3xxx_dss_dsi1_hwmod,
+ &omap3xxx_dss_rfbi_hwmod,
+ &omap3xxx_dss_venc_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
int r;
@@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void)
if (h)
r = omap_hwmod_register(h);
+ if (r < 0)
+ return r;
+
+ /*
+ * DSS code presumes that dss_core hwmod is handled first,
+ * _before_ any other DSS related hwmods so register common
+ * DSS hwmods last to ensure that dss_core is already registered.
+ * Otherwise some change things may happen, for ex. if dispc
+ * is handled before dss_core and DSS is enabled in bootloader
+ * DIPSC will be reset with outputs enabled which sometimes leads
+ * to unrecoverable L3 error.
+ * XXX The long-term fix to this is to ensure modules are set up
+ * in dependency order in the hwmod core code.
+ */
+ r = omap_hwmod_register(omap3xxx_dss_hwmods);
return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index f9f151081760..ef0524c10a84 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = {
static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
{
+ .name = "mpu",
.pa_start = 0x4012e000,
.pa_end = 0x4012e07f,
.flags = ADDR_TYPE_RT
@@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
{
+ .name = "dma",
.pa_start = 0x4902e000,
.pa_end = 0x4902e07f,
.flags = ADDR_TYPE_RT
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index c1c4d86a79a8..9ce765407ad5 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -19,6 +19,7 @@
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include <plat/irqs.h>
#include "vp.h"
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 9dd93453e563..7e755bb0ffc4 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
- return ret;
+ goto err_iounmap;
}
}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 6eeff0e0ae01..5c9acea95761 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = {
static u32 notrace dmtimer_read_sched_clock(void)
{
if (clksrc.reserved)
- return __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return __omap_dm_timer_read_counter(&clksrc, 1);
return 0;
}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 6fcf304d3cdf..a83cf51fc099 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
+ .slave_only = 1,
};
static struct resource sh7372_usb_dmae0_resources[] = {
@@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
+ .slave_only = 1,
};
static struct resource sh7372_usb_dmae1_resources[] = {
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index ba159370fa5f..80632e8d7538 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -225,8 +225,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
continue;
if (__phys_to_pfn(area->phys_addr) > pfn ||
- __pfn_to_phys(pfn) + offset + size-1 >
- area->phys_addr + area->size-1)
+ __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
continue;
/* we can drop the lock here as we know *area is static */
read_unlock(&vmlist_lock);
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 197e96f70405..3dea7231f637 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -8,6 +8,7 @@ config AVR32
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
+ select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
select GENERIC_IRQ_SHOW
select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index d4fc1a971779..604cd9dd1333 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -26,7 +26,6 @@
#include <linux/cache.h>
#include <linux/of_platform.h>
#include <linux/dma-mapping.h>
-#include <linux/cpu.h>
#include <asm/cacheflush.h>
#include <asm/entry.h>
#include <asm/cpuinfo.h>
@@ -227,23 +226,5 @@ static int __init setup_bus_notifier(void)
return 0;
}
-arch_initcall(setup_bus_notifier);
-
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
-static int __init topology_init(void)
-{
- int i, ret;
-
- for_each_present_cpu(i) {
- struct cpu *c = &per_cpu(cpu_devices, i);
- ret = register_cpu(c, i);
- if (ret)
- printk(KERN_WARNING "topology_init: register_cpu %d "
- "failed (%d)\n", i, ret);
- }
-
- return 0;
-}
-subsys_initcall(topology_init);
+arch_initcall(setup_bus_notifier);
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index c4c1312473fb..5ab6e89603c5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2356,6 +2356,7 @@ config PCI
depends on HW_HAS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
+ select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/mips/lib/iomap-pci.c b/arch/mips/lib/iomap-pci.c
index 2635b1a96333..fd35daa45314 100644
--- a/arch/mips/lib/iomap-pci.c
+++ b/arch/mips/lib/iomap-pci.c
@@ -10,8 +10,8 @@
#include <linux/module.h>
#include <asm/io.h>
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
{
struct pci_controller *ctrl = dev->bus->sysdata;
unsigned long base = ctrl->io_map_base;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 3c8db65c89e5..713fb58ca507 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -859,6 +859,7 @@ config PCI
depends on SYS_SUPPORTS_PCI
select PCI_DOMAINS
select GENERIC_PCI_IOMAP
+ select NO_GENERIC_PCI_IOPORT_MAP
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 8f18dd090a66..1e7b0e2e764d 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -356,8 +356,8 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
#ifndef CONFIG_GENERIC_IOMAP
-static void __iomem *ioport_map_pci(struct pci_dev *dev,
- unsigned long port, unsigned int nr)
+void __iomem *__pci_ioport_map(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
{
struct pci_channel *chan = dev->sysdata;
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 96657992a72e..ca5580e4d813 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -33,6 +33,7 @@ config SPARC
config SPARC32
def_bool !64BIT
select GENERIC_ATOMIC64
+ select CLZ_TAB
config SPARC64
def_bool 64BIT
diff --git a/arch/sparc/lib/divdi3.S b/arch/sparc/lib/divdi3.S
index 681b3683da9e..d74bc0925f2d 100644
--- a/arch/sparc/lib/divdi3.S
+++ b/arch/sparc/lib/divdi3.S
@@ -17,23 +17,9 @@ along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
- .data
- .align 8
- .globl __clz_tab
-__clz_tab:
- .byte 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5
- .byte 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6
- .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
- .byte 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .byte 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
- .size __clz_tab,256
- .global .udiv
-
.text
.align 4
+ .global .udiv
.globl __divdi3
__divdi3:
save %sp,-104,%sp
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index 0c9fa2745f13..b3b733262909 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -145,13 +145,13 @@ extern void __add_wrong_size(void)
#ifdef __HAVE_ARCH_CMPXCHG
#define cmpxchg(ptr, old, new) \
- __cmpxchg((ptr), (old), (new), sizeof(*ptr))
+ __cmpxchg(ptr, old, new, sizeof(*(ptr)))
#define sync_cmpxchg(ptr, old, new) \
- __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+ __sync_cmpxchg(ptr, old, new, sizeof(*(ptr)))
#define cmpxchg_local(ptr, old, new) \
- __cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
+ __cmpxchg_local(ptr, old, new, sizeof(*(ptr)))
#endif
/*
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index ab4092e3214e..7b9cfc4878af 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -190,6 +190,9 @@ struct x86_emulate_ops {
int (*intercept)(struct x86_emulate_ctxt *ctxt,
struct x86_instruction_info *info,
enum x86_intercept_stage stage);
+
+ bool (*get_cpuid)(struct x86_emulate_ctxt *ctxt,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx);
};
typedef u32 __attribute__((vector_size(16))) sse128_t;
@@ -298,6 +301,19 @@ struct x86_emulate_ctxt {
#define X86EMUL_MODE_PROT (X86EMUL_MODE_PROT16|X86EMUL_MODE_PROT32| \
X86EMUL_MODE_PROT64)
+/* CPUID vendors */
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx 0x68747541
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx 0x444d4163
+#define X86EMUL_CPUID_VENDOR_AuthenticAMD_edx 0x69746e65
+
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx 0x69444d41
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx 0x21726574
+#define X86EMUL_CPUID_VENDOR_AMDisbetterI_edx 0x74656273
+
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ebx 0x756e6547
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_ecx 0x6c65746e
+#define X86EMUL_CPUID_VENDOR_GenuineIntel_edx 0x49656e69
+
enum x86_intercept_stage {
X86_ICTP_NONE = 0, /* Allow zero-init to not match anything */
X86_ICPT_PRE_EXCEPT,
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 1aae78f775fc..4025fe4f928f 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -252,7 +252,8 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
unsigned short ss;
unsigned long sp;
#endif
- printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
+ printk(KERN_DEFAULT
+ "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
#ifdef CONFIG_PREEMPT
printk("PREEMPT ");
#endif
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 6d728d9284bd..17107bd6e1f0 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -129,7 +129,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
if (!stack) {
if (regs)
stack = (unsigned long *)regs->sp;
- else if (task && task != current)
+ else if (task != current)
stack = (unsigned long *)task->thread.sp;
else
stack = &dummy;
@@ -269,11 +269,11 @@ void show_registers(struct pt_regs *regs)
unsigned char c;
u8 *ip;
- printk(KERN_EMERG "Stack:\n");
+ printk(KERN_DEFAULT "Stack:\n");
show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
- 0, KERN_EMERG);
+ 0, KERN_DEFAULT);
- printk(KERN_EMERG "Code: ");
+ printk(KERN_DEFAULT "Code: ");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 37a458b521a6..d840e69a853c 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -39,6 +39,14 @@ static int reboot_mode;
enum reboot_type reboot_type = BOOT_ACPI;
int reboot_force;
+/* This variable is used privately to keep track of whether or not
+ * reboot_type is still set to its default value (i.e., reboot= hasn't
+ * been set on the command line). This is needed so that we can
+ * suppress DMI scanning for reboot quirks. Without it, it's
+ * impossible to override a faulty reboot quirk without recompiling.
+ */
+static int reboot_default = 1;
+
#if defined(CONFIG_X86_32) && defined(CONFIG_SMP)
static int reboot_cpu = -1;
#endif
@@ -67,6 +75,12 @@ bool port_cf9_safe = false;
static int __init reboot_setup(char *str)
{
for (;;) {
+ /* Having anything passed on the command line via
+ * reboot= will cause us to disable DMI checking
+ * below.
+ */
+ reboot_default = 0;
+
switch (*str) {
case 'w':
reboot_mode = 0x1234;
@@ -295,14 +309,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
},
},
- { /* Handle problems with rebooting on VersaLogic Menlow boards */
- .callback = set_bios_reboot,
- .ident = "VersaLogic Menlow based board",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"),
- DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
- },
- },
{ /* Handle reboot issue on Acer Aspire one */
.callback = set_kbd_reboot,
.ident = "Acer Aspire One A110",
@@ -316,7 +322,12 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
static int __init reboot_init(void)
{
- dmi_check_system(reboot_dmi_table);
+ /* Only do the DMI check if reboot_type hasn't been overridden
+ * on the command line
+ */
+ if (reboot_default) {
+ dmi_check_system(reboot_dmi_table);
+ }
return 0;
}
core_initcall(reboot_init);
@@ -465,7 +476,12 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
static int __init pci_reboot_init(void)
{
- dmi_check_system(pci_reboot_dmi_table);
+ /* Only do the DMI check if reboot_type hasn't been overridden
+ * on the command line
+ */
+ if (reboot_default) {
+ dmi_check_system(pci_reboot_dmi_table);
+ }
return 0;
}
core_initcall(pci_reboot_init);
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 05a562b85025..0982507b962a 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1891,6 +1891,51 @@ setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
ss->p = 1;
}
+static bool em_syscall_is_enabled(struct x86_emulate_ctxt *ctxt)
+{
+ struct x86_emulate_ops *ops = ctxt->ops;
+ u32 eax, ebx, ecx, edx;
+
+ /*
+ * syscall should always be enabled in longmode - so only become
+ * vendor specific (cpuid) if other modes are active...
+ */
+ if (ctxt->mode == X86EMUL_MODE_PROT64)
+ return true;
+
+ eax = 0x00000000;
+ ecx = 0x00000000;
+ if (ops->get_cpuid(ctxt, &eax, &ebx, &ecx, &edx)) {
+ /*
+ * Intel ("GenuineIntel")
+ * remark: Intel CPUs only support "syscall" in 64bit
+ * longmode. Also an 64bit guest with a
+ * 32bit compat-app running will #UD !! While this
+ * behaviour can be fixed (by emulating) into AMD
+ * response - CPUs of AMD can't behave like Intel.
+ */
+ if (ebx == X86EMUL_CPUID_VENDOR_GenuineIntel_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_GenuineIntel_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_GenuineIntel_edx)
+ return false;
+
+ /* AMD ("AuthenticAMD") */
+ if (ebx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_AuthenticAMD_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_AuthenticAMD_edx)
+ return true;
+
+ /* AMD ("AMDisbetter!") */
+ if (ebx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ebx &&
+ ecx == X86EMUL_CPUID_VENDOR_AMDisbetterI_ecx &&
+ edx == X86EMUL_CPUID_VENDOR_AMDisbetterI_edx)
+ return true;
+ }
+
+ /* default: (not Intel, not AMD), apply Intel's stricter rules... */
+ return false;
+}
+
static int em_syscall(struct x86_emulate_ctxt *ctxt)
{
struct x86_emulate_ops *ops = ctxt->ops;
@@ -1904,9 +1949,15 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt)
ctxt->mode == X86EMUL_MODE_VM86)
return emulate_ud(ctxt);
+ if (!(em_syscall_is_enabled(ctxt)))
+ return emulate_ud(ctxt);
+
ops->get_msr(ctxt, MSR_EFER, &efer);
setup_syscalls_segments(ctxt, &cs, &ss);
+ if (!(efer & EFER_SCE))
+ return emulate_ud(ctxt);
+
ops->get_msr(ctxt, MSR_STAR, &msr_data);
msr_data >>= 32;
cs_sel = (u16)(msr_data & 0xfffc);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 14d6cadc4ba6..9cbfc0698118 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1495,6 +1495,8 @@ static void record_steal_time(struct kvm_vcpu *vcpu)
int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
+ bool pr = false;
+
switch (msr) {
case MSR_EFER:
return set_efer(vcpu, data);
@@ -1635,6 +1637,18 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
"0x%x data 0x%llx\n", msr, data);
break;
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
+ pr = true;
+ case MSR_P6_EVNTSEL0:
+ case MSR_P6_EVNTSEL1:
+ if (kvm_pmu_msr(vcpu, msr))
+ return kvm_pmu_set_msr(vcpu, msr, data);
+
+ if (pr || data != 0)
+ pr_unimpl(vcpu, "disabled perfctr wrmsr: "
+ "0x%x data 0x%llx\n", msr, data);
+ break;
case MSR_K7_CLK_CTL:
/*
* Ignore all writes to this no longer documented MSR.
@@ -1835,6 +1849,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
case MSR_FAM10H_MMIO_CONF_BASE:
data = 0;
break;
+ case MSR_P6_PERFCTR0:
+ case MSR_P6_PERFCTR1:
+ case MSR_P6_EVNTSEL0:
+ case MSR_P6_EVNTSEL1:
+ if (kvm_pmu_msr(vcpu, msr))
+ return kvm_pmu_get_msr(vcpu, msr, pdata);
+ data = 0;
+ break;
case MSR_IA32_UCODE_REV:
data = 0x100000000ULL;
break;
@@ -4180,6 +4202,28 @@ static int emulator_intercept(struct x86_emulate_ctxt *ctxt,
return kvm_x86_ops->check_intercept(emul_to_vcpu(ctxt), info, stage);
}
+static bool emulator_get_cpuid(struct x86_emulate_ctxt *ctxt,
+ u32 *eax, u32 *ebx, u32 *ecx, u32 *edx)
+{
+ struct kvm_cpuid_entry2 *cpuid = NULL;
+
+ if (eax && ecx)
+ cpuid = kvm_find_cpuid_entry(emul_to_vcpu(ctxt),
+ *eax, *ecx);
+
+ if (cpuid) {
+ *eax = cpuid->eax;
+ *ecx = cpuid->ecx;
+ if (ebx)
+ *ebx = cpuid->ebx;
+ if (edx)
+ *edx = cpuid->edx;
+ return true;
+ }
+
+ return false;
+}
+
static struct x86_emulate_ops emulate_ops = {
.read_std = kvm_read_guest_virt_system,
.write_std = kvm_write_guest_virt_system,
@@ -4211,6 +4255,7 @@ static struct x86_emulate_ops emulate_ops = {
.get_fpu = emulator_get_fpu,
.put_fpu = emulator_put_fpu,
.intercept = emulator_intercept,
+ .get_cpuid = emulator_get_cpuid,
};
static void cache_all_regs(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9d74824a708d..f0b4caf85c1a 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -673,7 +673,7 @@ no_context(struct pt_regs *regs, unsigned long error_code,
stackend = end_of_stack(tsk);
if (tsk != &init_task && *stackend != STACK_END_MAGIC)
- printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
+ printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
tsk->thread.cr2 = address;
tsk->thread.trap_no = 14;
@@ -684,7 +684,7 @@ no_context(struct pt_regs *regs, unsigned long error_code,
sig = 0;
/* Executive summary in case the body of the oops scrolled away */
- printk(KERN_EMERG "CR2: %016lx\n", address);
+ printk(KERN_DEFAULT "CR2: %016lx\n", address);
oops_end(flags, regs, sig);
}
diff --git a/arch/xtensa/include/asm/string.h b/arch/xtensa/include/asm/string.h
index 5fb8c27cbef5..405a8c49ff2c 100644
--- a/arch/xtensa/include/asm/string.h
+++ b/arch/xtensa/include/asm/string.h
@@ -118,7 +118,4 @@ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
/* Don't build bcopy at all ... */
#define __HAVE_ARCH_BCOPY
-#define __HAVE_ARCH_MEMSCAN
-#define memscan memchr
-
#endif /* _XTENSA_STRING_H */