diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-04-25 22:11:54 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-04-25 22:11:54 +0300 |
| commit | d53c3eaaef6a05fec04e8b5990d97d7216eb5e42 (patch) | |
| tree | c234bfdc9f8ce8ca90e213fcfd9821005a88f132 /arch | |
| parent | 672d2dae19012cb2c40fdf36711ee3b5f5420724 (diff) | |
| parent | b8a4346d25024e00714fb6ceb0709075827f335d (diff) | |
| download | linux-d53c3eaaef6a05fec04e8b5990d97d7216eb5e42.tar.xz | |
Merge tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"The devicetree changes overall are again dominated by the Qualcomm
Snapdragon platform that weighs in at over 300 changesets, but there
are many updates across other platforms as well, notably Mediatek,
NXP, Rockchips, Renesas, TI, Samsung and ST Microelectronics. These
all add new features for existing machines, as well as new machines
and SoCs.
The newly added SoCs are:
- Allwinner T113-s, an Cortex-A7 based variant of the RISC-V based D1
chip.
- StarFive JH7110, a RISC-V SoC based on the Sifive U74 core like its
JH7100 predecessor, but with additional CPU cores and a GPU.
- Apple M2 as used in current Macbook Air/Pro and Mac Mini gets
added, with comparable support as its M1 predecessor.
- Unisoc UMS512 (Tiger T610) is a midrange smartphone SoC
- Qualcomm IPQ5332 and IPQ9574 are Wi-Fi 7 networking SoCs, based on
the Cortex-A53 and Cortex-A73 cores, respectively.
- Qualcomm sa8775p is an automotive SoC derived from the Snapdragon
family.
Including the initial board support for the added SoC platforms, there
are 52 new machines. The largest group are 19 boards industrial
embedded boards based on the NXP i.MX6 (32-bit) and i.MX8 (64-bit)
families.
Others include:
- Two boards based on the Allwinner f1c200s ultra-low-cost chip
- Three 'Banana Pi' variants based on the Amlogic g12b (A311D, S922X)
SoC.
- The Gl.Inet mv1000 router based on Marvell Armada 3720
- A Wifi/LTE Dongle based on Qualcomm msm8916
- Two robotics boards based on Qualcomm QRB chips
- Three Snapdragon based phones made by Xiaomi
- Five developments boards based on various Rockchip SoCs, including
the rk3588s-khadas-edge2 and a few NanoPi models
- The AM625 Beagleplay industrial SBC
Another 14 machines get removed: both boards for the obsolete 'oxnas'
platform, three boards for the Renesas r8a77950 SoC that were only for
pre-production chips, and various chromebook models based on the
Qualcomm Sc7180 'trogdor' design that were never part of products"
* tag 'soc-dt-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (836 commits)
arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro
arm64: dts: rockchip: Add vdd_cpu_big regulators to rk3588-rock-5b
arm64: dts: rockchip: Use generic name for es8316 on Pinebook Pro and Rock 5B
arm64: dts: rockchip: Drop RTC clock-frequency on rk3588-rock-5b
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
arm64: dts: rockchip: Add pinctrl gpio-ranges for rk356x
ARM: dts: nomadik: Replace deprecated spi-gpio properties
ARM: dts: aspeed-g6: Add UDMA node
ARM: dts: aspeed: greatlakes: add mctp device
ARM: dts: aspeed: greatlakes: Add gpio names
ARM: dts: aspeed: p10bmc: Change power supply info
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer
arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer
arm64: dts: mediatek: mt6795: Add tertiary PWM node
arm64: dts: rockchip: add panel to Anbernic RG353 series
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
...
Diffstat (limited to 'arch')
676 files changed, 39043 insertions, 7431 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index efe4152e5846..59829fc90315 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -561,7 +561,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-wandboard-revd1.dtb \ imx6dl-yapp4-draco.dtb \ imx6dl-yapp4-hydra.dtb \ + imx6dl-yapp4-lynx.dtb \ imx6dl-yapp4-orion.dtb \ + imx6dl-yapp4-phoenix.dtb \ imx6dl-yapp4-ursa.dtb \ imx6q-apalis-eval.dtb \ imx6q-apalis-ixora.dtb \ @@ -668,6 +670,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ imx6q-yapp4-crux.dtb \ + imx6q-yapp4-pegasus.dtb \ imx6q-zii-rdu2.dtb \ imx6qp-mba6b.dtb \ imx6qp-nitrogen6_max.dtb \ @@ -683,6 +686,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-vicutp.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-yapp4-crux-plus.dtb \ + imx6qp-yapp4-pegasus-plus.dtb \ imx6qp-zii-rdu2.dtb \ imx6s-dhcom-drc02.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ @@ -690,6 +694,7 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-kobo-aura2.dtb \ imx6sl-tolino-shine2hd.dtb \ imx6sl-tolino-shine3.dtb \ + imx6sl-tolino-vision.dtb \ imx6sl-tolino-vision5.dtb \ imx6sl-warp.dtb dtb-$(CONFIG_SOC_IMX6SLL) += \ @@ -755,6 +760,10 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-phytec-segin-lc-rdk-nand.dtb \ imx6ull-phytec-tauri-emmc.dtb \ imx6ull-phytec-tauri-nand.dtb \ + imx6ull-tarragon-master.dtb \ + imx6ull-tarragon-micro.dtb \ + imx6ull-tarragon-slave.dtb \ + imx6ull-tarragon-slavext.dtb \ imx6ull-tqma6ull2-mba6ulx.dtb \ imx6ull-tqma6ull2l-mba6ulx.dtb \ imx6ulz-14x14-evk.dtb \ @@ -994,16 +1003,24 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb +am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo +am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ am57xx-beagle-x15-revc.dtb \ + am57xx-evm.dtb \ + am57xx-evm-reva3.dtb \ am5729-beagleboneai.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ + am572x-idk-touchscreen.dtbo \ am571x-idk.dtb \ + am571x-idk-touchscreen.dtbo \ am574x-idk.dtb \ + am57xx-idk-lcd-osd101t2045.dtbo \ + am57xx-idk-lcd-osd101t2587.dtbo \ dra7-evm.dtb \ dra72-evm.dtb \ dra72-evm-revc.dtb \ @@ -1033,9 +1050,6 @@ dtb-$(CONFIG_ARCH_PXA) += \ pxa300-raumfeld-speaker-m.dtb \ pxa300-raumfeld-speaker-one.dtb \ pxa300-raumfeld-speaker-s.dtb -dtb-$(CONFIG_ARCH_OXNAS) += \ - ox810se-wd-mbwe.dtb \ - ox820-cloudengines-pogoplug-series-3.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ @@ -1397,6 +1411,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ + sun8i-t113s-mangopi-mq-r-t113.dtb \ sun8i-t3-cqa3t-bv3.dtb \ sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb \ @@ -1406,7 +1421,9 @@ dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_MACH_SUNIV) += \ - suniv-f1c100s-licheepi-nano.dtb + suniv-f1c100s-licheepi-nano.dtb \ + suniv-f1c200s-lctech-pi.dtb \ + suniv-f1c200s-popstick-v1.1.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ tegra20-asus-tf101.dtb \ diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi index 947497413977..67c7fcc52ce6 100644 --- a/arch/arm/boot/dts/am335x-pcm-953.dtsi +++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi @@ -29,25 +29,23 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "gpio"; default-state = "on"; }; user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - linux,default-trigger = "gpio"; default-state = "on"; }; }; - user_buttons: user_buttons { + user_buttons: user-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&user_buttons_pins>; @@ -70,14 +68,14 @@ }; &am33xx_pinmux { - user_buttons_pins: pinmux_user_buttons { + user_buttons_pins: pinmux-user-buttons { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu0.gpio3_7 */ AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7) /* emu1.gpio3_8 */ >; }; - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn1.gpio1_30 */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_csn2.gpio1_31 */ @@ -87,7 +85,7 @@ /* CAN */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart1_rxd.dcan1_tx_mux2 */ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2) /* uart1_txd.dcan1_rx_mux2 */ @@ -144,7 +142,7 @@ pinctrl-names = "default"; pinctrl-0 = <&cb_gpio_pins>; - cb_gpio_pins: pinmux_cb_gpio { + cb_gpio_pins: pinmux-cb-gpio { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_ctsn.gpio1_8 */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* uart0_rtsn.gpio1_9 */ @@ -154,7 +152,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1_pins { + mmc1_pins: pinmux-mmc1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -178,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1 { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) @@ -194,14 +192,14 @@ >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ >; }; - uart3_pins: pinmux_uart3 { + uart3_pins: pinmux-uart3 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd3.uart3_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rxd2.uart3_txd */ diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index e2cec1ffaa4c..034dc5181679 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -14,6 +14,7 @@ aliases { rtc0 = &i2c_rtc; rtc1 = &rtc; + rtc2 = &tps; }; cpus { @@ -48,7 +49,7 @@ /* EMMC */ &am33xx_pinmux { - emmc_pins: pinmux_emmc_pins { + emmc_pins: pinmux-emmc-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ @@ -124,7 +125,7 @@ /* I2C Busses */ &am33xx_pinmux { - i2c0_pins: pinmux_i2c0 { + i2c0_pins: pinmux-i2c0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0) @@ -164,7 +165,7 @@ /* NAND memory */ &am33xx_pinmux { - nandflash_pins: pinmux_nandflash { + nandflash_pins: pinmux-nandflash { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) @@ -202,7 +203,6 @@ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <8>; ti,nand-ecc-opt = "bch8"; - gpmc,device-nand = "true"; gpmc,device-width = <1>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; @@ -316,7 +316,7 @@ /* SPI Busses */ &am33xx_pinmux { - spi0_pins: pinmux_spi0 { + spi0_pins: pinmux-spi0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi index 7b3966ee51b9..3894f14a914c 100644 --- a/arch/arm/boot/dts/am335x-regor.dtsi +++ b/arch/arm/boot/dts/am335x-regor.dtsi @@ -18,7 +18,7 @@ }; /* User IO */ - user_leds: user_leds { + user_leds: user-leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; @@ -39,7 +39,7 @@ /* User Leds */ &am33xx_pinmux { - user_leds_pins: pinmux_user_leds { + user_leds_pins: pinmux-user-leds { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ @@ -49,7 +49,7 @@ /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -65,7 +65,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -108,7 +108,7 @@ pinctrl-names = "default"; pinctrl-0 = <&user_gpios_pins>; - user_gpios_pins: pinmux_user_gpios { + user_gpios_pins: pinmux-user-gpios { pinctrl-single,pins = < /* DIGIN 1-4 */ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ @@ -126,7 +126,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -155,14 +155,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart2_pins: pinmux_uart2 { + uart2_pins: pinmux-uart2 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ @@ -184,7 +184,7 @@ /* RS485 - UART1 */ &am33xx_pinmux { - uart1_rs485_pins: pinmux_uart1_rs485_pins { + uart1_rs485_pins: pinmux-uart1-rs485-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index f957fea8208e..6a103f17585b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -8,8 +8,34 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; - sound: sound_iface { - compatible = "ti,da830-evm-audio"; + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-wega"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_iface_main>; + simple-audio-card,frame-master = <&sound_iface_main>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + sound_iface_main: simple-audio-card,codec { + sound-dai = <&tlv320aic3007>; + clocks = <&mcasp0_fck>; + }; + }; vcc3v3: fixedregulator1 { @@ -23,7 +49,7 @@ /* Audio */ &am33xx_pinmux { - mcasp0_pins: pinmux_mcasp0 { + mcasp0_pins: pinmux-mcasp0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) @@ -36,6 +62,7 @@ &i2c0 { tlv320aic3007: tlv320aic3007@18 { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3007"; reg = <0x18>; AVDD-supply = <&vcc3v3>; @@ -47,6 +74,7 @@ }; &mcasp0 { + #sound-dai-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&mcasp0_pins>; op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ @@ -59,23 +87,10 @@ status = "okay"; }; -&sound { - ti,model = "AM335x-Wega"; - ti,audio-codec = <&tlv320aic3007>; - ti,mcasp-controller = <&mcasp0>; - ti,audio-routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; - clocks = <&mcasp0_fck>; - clock-names = "mclk"; - status = "okay"; -}; /* CAN Busses */ &am33xx_pinmux { - dcan1_pins: pinmux_dcan1 { + dcan1_pins: pinmux-dcan1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ @@ -91,7 +106,7 @@ /* Ethernet */ &am33xx_pinmux { - ethernet1_pins: pinmux_ethernet1 { + ethernet1_pins: pinmux-ethernet1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ @@ -131,7 +146,7 @@ /* MMC */ &am33xx_pinmux { - mmc1_pins: pinmux_mmc1 { + mmc1_pins: pinmux-mmc1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) @@ -161,14 +176,14 @@ /* UARTs */ &am33xx_pinmux { - uart0_pins: pinmux_uart0 { + uart0_pins: pinmux-uart0 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) >; }; - uart1_pins: pinmux_uart1_pins { + uart1_pins: pinmux-uart1 { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso new file mode 100644 index 000000000000..c051ee6c1130 --- /dev/null +++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio5>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso new file mode 100644 index 000000000000..573e932b1239 --- /dev/null +++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen: edt-ft5506@38 { + compatible = "edt,edt-ft5506", "edt,edt-ft5x06"; + + reg = <0x38>; + + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + /* GPIO line is inverted before going to touch panel */ + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <1920>; + touchscreen-size-y = <1200>; + + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso new file mode 100644 index 000000000000..12385a31061e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-evm.dtso @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DT overlay for AM57xx GP EVM boards + * + * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +&{/} { + compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; + model = "TI AM5728 EVM"; + + aliases { + display0 = "/display"; + display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be + // resolved here correcly based on + // information in the base dtb symbol + // table with a fix in dtc + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user1 { + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + label = "USER1"; + linux,code = <BTN_1>; + }; + + button-user2 { + gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + label = "USER2"; + linux,code = <BTN_2>; + }; + + button-user3 { + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + label = "USER3"; + linux,code = <BTN_3>; + }; + + button-user4 { + gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + label = "USER4"; + linux,code = <BTN_4>; + }; + + button-user5 { + gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + label = "USER5"; + linux,code = <BTN_5>; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd070t1718-19ts", "panel-dpi"; + backlight = <&lcd_bl>; + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + label = "lcd"; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 243 245 247 249 251 252 253 255>; + default-brightness-level = <8>; + pwms = <&ehrpwm1 0 50000 0>; + }; +}; + +&ehrpwm1 { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + reg = <0x5c>; + reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&dss { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpi_out: endpoint { + data-lines = <24>; + remote-endpoint = <&lcd_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso new file mode 100644 index 000000000000..25d74e9f3c9e --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2045-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso new file mode 100644 index 000000000000..8cea7ba32487 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&{/} { + aliases { + display0 = "/display"; + display1 = "/connector"; + }; + + lcd_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 1>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; +}; + +&dsi_bridge { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + lcd: display { + compatible = "osddisplays,osd101t2587-53ts"; + reg = <0>; + + label = "lcd"; + + backlight = <&lcd_bl>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&dsi_bridge_ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&lcd_in>; + }; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index be005c9f42ef..2fce8e794265 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -171,8 +171,8 @@ port@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; + phy-mode = "rgmii-id"; fixed-link { speed = <1000>; full-duplex; diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts index 095df5567c93..f4c4b213ef4e 100644 --- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts @@ -148,7 +148,7 @@ port@0 { ethernet = <ð0>; - label = "cpu"; + phy-mode = "rgmii"; reg = <0>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts index c9ac630e5874..1990f7d0cc79 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts @@ -68,8 +68,13 @@ port@10 { reg = <10>; - label = "cpu"; + phy-mode = "2500base-x"; + ethernet = <ð1>; + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts index fa653b379490..b795ad573891 100644 --- a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts @@ -48,8 +48,13 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "2500base-x"; ethernet = <ð1>; + + fixed-link { + speed = <2500>; + full-duplex; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 85e8d966f6c1..fc8216fd9f60 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -195,7 +195,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "sgmii"; ethernet = <ð2>; fixed-link { diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 0c1f238e4c30..2d8d319bec83 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -479,7 +479,6 @@ ports@5 { reg = <5>; - label = "cpu"; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -491,7 +490,6 @@ ports@6 { reg = <6>; - label = "cpu"; ethernet = <ð0>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 2bcec5419b66..45cc784659fd 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -62,7 +62,7 @@ }; usb@58000 { - status = "ok"; + status = "okay"; }; ethernet@70000 { diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index dbe8dfe236fb..7a0614fd0c93 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -302,7 +302,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts index 4b91600eaf62..1e0e88465254 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts @@ -251,6 +251,14 @@ pinctrl-0 = <&pinctrl_rgmii1_default>; }; +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + &fmc { status = "okay"; flash@0 { @@ -439,6 +447,26 @@ status = "okay"; }; +&i2c8 { + status = "okay"; + + gpio@77 { + compatible = "nxp,pca9539"; + reg = <0x77>; + gpio-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <2>; + + bmc-ocp0-en-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-high; + line-name = "bmc-ocp0-en-n"; + }; + }; +}; + &i2c9 { status = "okay"; }; @@ -530,13 +558,20 @@ /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n", "host0-reboot-ack-n","host0-ready","host0-shd-req-n", "host0-shd-ack-n","s0-overtemp-n", - /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","", + /*W0-W7*/ "","ocp-main-pwren","ocp-pgood","", "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel", /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok", "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n", "s1-overtemp-n","s1-spi-auth-fail-n", /*Y0-Y7*/ "","","","","","","","host0-special-boot", /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","",""; + + ocp-aux-pwren-hog { + gpio-hog; + gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ocp-aux-pwren"; + }; }; &gpio1 { diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts index 9b4cf5ebe6d5..c4b2efbfdf56 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts @@ -63,7 +63,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout.dtsi" }; }; @@ -202,3 +202,7 @@ status = "okay"; aspeed,lpc-io-reg = <0xca2>; }; + +&peci0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts index ff4c07c69af1..4554abf0c7cd 100644 --- a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts @@ -31,7 +31,7 @@ }; system-fault { - gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; panic-indicator; }; }; @@ -51,7 +51,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; - spi-max-frequency = <100000000>; /* 100 MHz */ + spi-max-frequency = <50000000>; /* 50 MHz */ #include "openbmc-flash-layout-64.dtsi" }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts index 8c05bd56ce1e..7a53f54833a0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts @@ -156,6 +156,7 @@ &i2c8 { status = "okay"; + mctp-controller; temperature-sensor@1f { compatible = "ti,tmp421"; reg = <0x1f>; @@ -165,6 +166,10 @@ compatible = "st,24c32"; reg = <0x50>; }; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; }; &i2c9 { @@ -238,4 +243,52 @@ &gpio0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>; + + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "power-bmc-nic","presence-ocp-debug", + "power-bmc-slot1","power-bmc-slot2", + "power-bmc-slot3","power-bmc-slot4","","", + /*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary", + "reset-cause-nic-secondary","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button", + "slot3-bmc-reset-button","slot4-bmc-reset-button", + "","","","presence-emmc", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","", + "presence-mb-slot1","presence-mb-slot2", + "presence-mb-slot3","presence-mb-slot4", + /*I0-I7*/ "","","","","","","bb-bmc-button","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","", + /*N0-N7*/ "","","","","bmc-ready","","","", + /*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable", + /*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable", + "reset-cause-pcie-slot1","reset-cause-pcie-slot2", + "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","","","", + /*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","GND", + /*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button", + "bmc-slot3-ac-button","bmc-slot4-ac-button", + "","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","reset-cause-emmc","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","","","","", + /*18C0-18C7*/ "","","","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "","","","","","","",""; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts index a5be0ee048ec..81902cbe662c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts @@ -552,14 +552,14 @@ &i2c3 { status = "okay"; - power-supply@58 { - compatible = "ibm,cffps"; - reg = <0x58>; + power-supply@5a { + compatible = "acbel,fsg032"; + reg = <0x5a>; }; - power-supply@59 { - compatible = "ibm,cffps"; - reg = <0x59>; + power-supply@5b { + compatible = "acbel,fsg032"; + reg = <0x5b>; }; }; @@ -686,7 +686,7 @@ }; eeprom@50 { - compatible = "atmel,24c64"; + compatible = "atmel,24c128"; reg = <0x50>; }; @@ -884,16 +884,6 @@ use-ncsi; }; -&mac3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii4_default>; - clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, - <&syscon ASPEED_CLK_MAC4RCLK>; - clock-names = "MACCLK", "RCLK"; - use-ncsi; -}; - &wdt1 { aspeed,reset-type = "none"; aspeed,external-signal; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index c3b0cd61ac85..c6f8f20914d1 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -162,6 +162,11 @@ #size-cells = <1>; ranges; + event_log: tcg_event_log@b3d00000 { + no-map; + reg = <0xb3d00000 0x100000>; + }; + ramoops@b3e00000 { compatible = "ramoops"; reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ @@ -1887,6 +1892,7 @@ tpm@2e { compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; reg = <0x2e>; + memory-region = <&event_log>; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 8246a60de0d0..172dd748d807 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -863,6 +863,15 @@ clocks = <&syscon ASPEED_CLK_GATE_FSICLK>; status = "disabled"; }; + + udma: dma-controller@1e79e000 { + compatible = "aspeed,ast2600-udma"; + reg = <0x1e79e000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <28>; + #dma-cells = <1>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 180e4b1aa2f6..5cd593028aff 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -578,7 +578,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 8aa9e8dea337..95ecb7d040a8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -43,7 +43,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 83bcf9fe0152..4617805c7748 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -220,7 +220,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 1346b8f2b259..999adeca6f33 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -669,7 +669,8 @@ #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <104000000>; + spi-cs-setup-ns = <7>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; m25p,fast-read; diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi index f4b2db9bc4ab..cd25ed2757b7 100644 --- a/arch/arm/boot/dts/bcm47622.dtsi +++ b/arch/arm/boot/dts/bcm47622.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index b774a8d63813..93281c47c9ba 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -66,6 +66,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; /* ARM bus */ @@ -203,6 +209,18 @@ status = "disabled"; }; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand_controller: nand-controller@2000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi index 7cd55d64de71..ba7f265db121 100644 --- a/arch/arm/boot/dts/bcm63148.dtsi +++ b/arch/arm/boot/dts/bcm63148.dtsi @@ -60,6 +60,12 @@ #clock-cells = <0>; clock-frequency = <50000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index 043e699cbc27..d8268a1e889b 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -71,6 +71,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -78,6 +79,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +116,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi index 5c72219bc194..49ecc1f0c18c 100644 --- a/arch/arm/boot/dts/bcm6756.dtsi +++ b/arch/arm/boot/dts/bcm6756.dtsi @@ -88,6 +88,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -119,6 +125,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index 81513a793815..fbc7d3a5dc5f 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -61,6 +61,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi index 5fa5feac0e29..5e0fe26530f1 100644 --- a/arch/arm/boot/dts/bcm6855.dtsi +++ b/arch/arm/boot/dts/bcm6855.dtsi @@ -78,6 +78,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -109,6 +115,19 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index 4ec836ac4baf..96529d3d4dc2 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -61,6 +61,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -68,6 +69,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -100,6 +107,18 @@ #size-cells = <1>; ranges = <0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts index 6f083724ab8e..93b8ce22678d 100644 --- a/arch/arm/boot/dts/bcm947622.dts +++ b/arch/arm/boot/dts/bcm947622.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts index d28c4f130ca2..1b405c249213 100644 --- a/arch/arm/boot/dts/bcm963138.dts +++ b/arch/arm/boot/dts/bcm963138.dts @@ -25,3 +25,7 @@ &serial0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 15bec75be74c..b5af61853a07 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -50,3 +50,7 @@ &sata_phy { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts index 98f6a6d09f50..1f5d6d783f09 100644 --- a/arch/arm/boot/dts/bcm963148.dts +++ b/arch/arm/boot/dts/bcm963148.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts index fa096e9cde23..d036e99dd8d1 100644 --- a/arch/arm/boot/dts/bcm963178.dts +++ b/arch/arm/boot/dts/bcm963178.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts index 9a4a87ba9c8a..8b104f3fb14a 100644 --- a/arch/arm/boot/dts/bcm96756.dts +++ b/arch/arm/boot/dts/bcm96756.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts index c70ebccabc19..55852c229608 100644 --- a/arch/arm/boot/dts/bcm96846.dts +++ b/arch/arm/boot/dts/bcm96846.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts index 4438152561ac..2ad880af2104 100644 --- a/arch/arm/boot/dts/bcm96855.dts +++ b/arch/arm/boot/dts/bcm96855.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts index 8fbc175cb452..b7af8ade7a9d 100644 --- a/arch/arm/boot/dts/bcm96878.dts +++ b/arch/arm/boot/dts/bcm96878.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 1fdd9a249165..0ca849885d1f 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -415,7 +415,7 @@ &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; - status = "ok"; + status = "okay"; cs3 { #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 85408d4c6f2e..062c86361640 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -422,7 +422,7 @@ clocks = <&gate_clk 3>; clock-names = "sata"; #phy-cells = <0>; - status = "ok"; + status = "okay"; }; audio0: audio-controller@b0000 { diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts index a1e22f630638..660cc7fac4db 100644 --- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts +++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts @@ -16,6 +16,10 @@ model = "Samsung ARTIK5 evaluation board"; compatible = "samsung,artik5-eval", "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + + aliases { + mmc0 = &mshc_2; + }; }; &mshc_2 { diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 0ac3f284fbb8..3fdd922e635c 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -17,6 +17,11 @@ / { compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3"; + aliases { + mmc0 = &mshc_0; + mmc1 = &mshc_1; + }; + chosen { stdout-path = &serial_2; }; @@ -321,6 +326,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 80d90fe7fad1..2de877d4ccc5 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -22,6 +22,7 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; }; memory@40000000 { @@ -443,6 +444,7 @@ vmmc-supply = <&vemmc_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 1f9cba0607e1..88fb3e68ff02 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -23,6 +23,8 @@ aliases { i2c7 = &i2c_max77836; + mmc0 = &mshc_0; + mmc1 = &mshc_1; }; chosen { @@ -624,6 +626,7 @@ vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; max-frequency = <100000000>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 28bb2ce8ccf7..bd37f1b587f0 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -28,9 +28,6 @@ aliases { pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; - mshc0 = &mshc_0; - mshc1 = &mshc_1; - mshc2 = &mshc_2; spi0 = &spi_0; spi1 = &spi_1; i2c0 = &i2c_0; @@ -346,7 +343,7 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos3250-pmu", "syscon"; + compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; @@ -354,12 +351,11 @@ clock-names = "clkout8"; clocks = <&cmu CLK_FIN_PLL>; #clock-cells = <1>; - }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; pd_cam: power-domain@10023c00 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 44dcb1377475..8dd6976ab0a7 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -105,12 +105,6 @@ reg = <0x12570000 0x14>; }; - mipi_phy: video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - pd_mfc: power-domain@10023c40 { compatible = "samsung,exynos4210-pd"; reg = <0x10023c40 0x20>; @@ -181,11 +175,16 @@ }; pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4210-pmu", "syscon"; + compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon"; reg = <0x10020000 0x4000>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; dsi_0: dsi@11c80000 { diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index bba85011ecc9..37cd4dde53e4 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -25,6 +25,12 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 1103e7f92b57..f1927ca15e08 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -30,6 +30,11 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 181c99eca675..b566f878ed84 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -25,6 +25,10 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index b8e9dd23fc51..ff6ee4b2c31b 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -26,6 +26,12 @@ 0x70000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; stdout-path = "serial2:115200n8"; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 62bf335d5bed..8fe0d5d2be2d 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -24,6 +24,12 @@ 0x50000000 0x10000000>; }; + aliases { + mmc0 = &sdhci_0; + mmc1 = &sdhci_2; + mmc2 = &sdhci_3; + }; + chosen { bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; stdout-path = "serial2:115200n8"; @@ -516,7 +522,7 @@ }; &mct { - compatible = "none"; + status = "disabled"; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index b596e997e451..ded232b04e0d 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -20,6 +20,10 @@ model = "TOPEET iTop 4412 Elite board based on Exynos4412"; compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc1 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; stdout-path = "serial2:115200n8"; @@ -182,7 +186,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index e42e39dc0e40..7bc6968af9c3 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -23,6 +23,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + }; + firmware@203f000 { compatible = "samsung,secure-firmware"; reg = <0x0203f000 0x1000>; @@ -476,6 +480,7 @@ vmmc-supply = <&buck9_reg>; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 525f945c4b91..e6b949c1a00f 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -25,6 +25,9 @@ aliases { i2c11 = &i2c_max77693; i2c12 = &i2c_max77693_fuel; + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; }; chosen { @@ -497,8 +500,7 @@ pinctrl-0 = <&fimc_is_uart>; pinctrl-names = "default"; status = "okay"; - - }; +}; &fimc_lite_0 { status = "okay"; @@ -592,7 +594,6 @@ /* CAM_B_CLKOUT */ clocks = <&camera 1>; clock-names = "extclk"; - samsung,camclk-out = <1>; gpios = <&gpm1 6 GPIO_ACTIVE_LOW>; port { @@ -979,6 +980,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 7c2780d3e37c..45ef7b7ba7e0 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,11 @@ #include "exynos-mfc-reserved-memory.dtsi" / { + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + }; + chosen { stdout-path = &serial_1; }; @@ -533,6 +538,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index ea9fd284386d..23b151645d66 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -25,6 +25,11 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &mshc_0; + mmc1 = &sdhci_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -498,6 +503,7 @@ broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index 3e05a49f29ff..0b89d5682f85 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -26,6 +26,12 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mshc_0; + mmc2 = &sdhci_2; + mmc3 = &sdhci_3; + }; + chosen { stdout-path = &serial_2; }; @@ -188,14 +194,12 @@ pinctrl-names = "default"; interrupt-parent = <&gpx0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - irq-trigger = <0x1>; st,adc-freq = <3>; st,mod-12b = <1>; st,ref-sel = <0>; st,sample-time = <3>; - stmpe_adc { + adc { compatible = "st,stmpe-adc"; #io-channel-cells = <1>; st,norequest-mask = <0x2f>; @@ -695,6 +699,7 @@ samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; + mmc-ddr-1_8v; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; bus-width = <4>; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a40ff394977c..715dfcba1417 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -22,6 +22,10 @@ reg = <0x40000000 0x40000000>; }; + aliases { + mmc0 = &sdhci_2; + }; + chosen { bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc"; stdout-path = "serial1:115200n8"; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index e0b6162d2e2a..5a2dcdc5c28b 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -17,6 +17,10 @@ model = "FriendlyARM TINY4412 board based on Exynos4412"; compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4"; + aliases { + mmc0 = &sdhci_2; + }; + chosen { stdout-path = &serial_0; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 11f9dd94b6b3..82a36fb5ee8b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -28,7 +28,6 @@ pinctrl3 = &pinctrl_3; fimc-lite0 = &fimc_lite_0; fimc-lite1 = &fimc_lite_1; - mshc0 = &mshc_0; }; bus_acp: bus-acp { @@ -798,7 +797,7 @@ }; &pmu_system_controller { - compatible = "samsung,exynos4412-pmu", "syscon"; + compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon"; clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 2e3da5670bc2..d586189966da 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -192,12 +197,15 @@ vddio-supply = <&vcc_1v8_reg>; vddlvds-supply = <&vcc_3v3_reg>; reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - bridge_out_ep: endpoint { - remote-endpoint = <&panel_ep>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; }; }; }; @@ -586,6 +594,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 831b3494bd46..bb623726ef1e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,6 +17,8 @@ compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5"; aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -350,6 +352,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; &mmc_2 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 3d84b9c6dea3..59b2cc35c37b 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -15,6 +15,9 @@ / { aliases { i2c104 = &i2c_104; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_3; /* WiFi */ }; memory@40000000 { @@ -549,6 +552,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* uSD card */ diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 5eca10ecd550..c12bb17631b7 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -23,6 +23,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_1; + }; + chosen { bootargs = "console=tty1"; stdout-path = "serial3:115200n8"; @@ -431,6 +436,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; }; /* diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 60a623e3a200..1a4c6c028d03 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -30,10 +30,6 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; - mshc3 = &mmc_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; @@ -290,7 +286,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; + compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -298,6 +294,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; }; watchdog@101d0000 { @@ -810,18 +816,6 @@ status = "disabled"; }; - dp_phy: video-phy-0 { - compatible = "samsung,exynos5250-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: video-phy-1 { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - dsi_0: dsi@14500000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x14500000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index 387b8494f18f..d072a7398866 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -18,6 +18,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -89,6 +94,7 @@ cap-mmc-highspeed; mmc-hs200-1_8v; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index 6ddd1dd2fb0b..882fc77c4bc4 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -21,6 +21,8 @@ aliases { ethernet = ðernet; + mmc0 = &mmc_0; + mmc1 = &mmc_2; }; memory@40000000 { @@ -513,6 +515,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index b8f953c41c73..bb29b76f6f6a 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -18,6 +18,11 @@ reg = <0x40000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -61,6 +66,7 @@ cap-mmc-highspeed; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 55b7759682a9..809ddda02e53 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -23,6 +23,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { stdout-path = "serial3:115200n8"; }; @@ -778,6 +783,7 @@ status = "okay"; non-removable; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi index 63675fe189cd..f525b2f5e4e0 100644 --- a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi +++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi @@ -28,6 +28,11 @@ * for more details. */ + aliases { + mmc0 = &mmc_0; + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -604,6 +609,7 @@ bus-width = <8>; cap-mmc-highspeed; card-detect-delay = <200>; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 9e2123470cad..7a48f2b32819 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -31,6 +31,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* uSD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -722,6 +725,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 4d7b6d9008a7..e299344e427a 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -21,6 +21,11 @@ reg = <0x20000000 0x80000000>; }; + aliases { + mmc0 = &mmc_0; + mmc1 = &mmc_2; + }; + chosen { bootargs = "init=/linuxrc"; stdout-path = "serial2:115200n8"; @@ -355,6 +360,7 @@ status = "okay"; broken-cd; card-detect-delay = <200>; + mmc-ddr-1_8v; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 13d7be236a23..dd291f1199f2 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -19,9 +19,6 @@ compatible = "samsung,exynos5420", "samsung,exynos5"; aliases { - mshc0 = &mmc_0; - mshc1 = &mmc_1; - mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -696,18 +693,6 @@ status = "disabled"; }; - dp_phy: dp-video-phy { - compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: mipi-video-phy { - compatible = "samsung,exynos5420-mipi-video-phy"; - syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - dsi: dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; @@ -933,7 +918,7 @@ }; pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5420-pmu", "syscon"; + compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon"; reg = <0x10040000 0x5000>; clock-names = "clkout16"; clocks = <&clock CLK_FIN_PLL>; @@ -941,6 +926,16 @@ interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&gic>; + + dp_phy: dp-phy { + compatible = "samsung,exynos5420-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi_phy: mipi-phy { + compatible = "samsung,exynos5420-mipi-video-phy"; + #phy-cells = <1>; + }; }; tmu_cpu0: tmu@10060000 { diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 30fc677d8bac..2f5b8602e020 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -19,6 +19,10 @@ reg = <0x40000000 0x7ea00000>; }; + aliases { + mmc2 = &mmc_2; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index e6e7e2ff2a26..b4a851aa8881 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -13,6 +13,10 @@ #include "exynos5422-odroid-core.dtsi" / { + aliases { + mmc0 = &mmc_0; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -472,6 +476,7 @@ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; max-frequency = <200000000>; diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts index df41723d56d4..c35261a338ff 100644 --- a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts +++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts @@ -19,6 +19,10 @@ chassis-type = "handset"; + aliases { + mmc0 = &mmc_0; + }; + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x80000000>; /* 2 GiB */ @@ -597,6 +601,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; cap-mmc-highspeed; non-removable; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 0ebcb66c6319..1f544f12da6c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -29,6 +29,9 @@ aliases { /* Assign 20 so we don't get confused w/ builtin ones */ i2c20 = &i2c_tunnel; + mmc0 = &mmc_0; /* eMMC */ + mmc1 = &mmc_2; /* SD */ + mmc2 = &mmc_1; /* WiFi */ }; backlight: backlight { @@ -703,6 +706,7 @@ /* eMMC flash */ &mmc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index ce356c469e1e..d7f5daecc9dc 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -24,42 +24,42 @@ amba-bus { dual_timer0: dual_timer@800000 { - status = "ok"; + status = "okay"; }; uart0: serial@b00000 { /* console */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; - status = "ok"; + status = "okay"; }; uart1: serial@b01000 { /* modem */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; - status = "ok"; + status = "okay"; }; uart2: serial@b02000 { /* audience */ pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; - status = "ok"; + status = "okay"; }; uart3: serial@b03000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; - status = "ok"; + status = "okay"; }; uart4: serial@b04000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; - status = "ok"; + status = "okay"; }; pmx0: pinmux@803000 { diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts index f5691dbc26d2..0210064bf6a5 100644 --- a/arch/arm/boot/dts/hip04-d01.dts +++ b/arch/arm/boot/dts/hip04-d01.dts @@ -23,7 +23,7 @@ soc { uart0: serial@4007000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts index 14a92fe59770..98672932e41b 100644 --- a/arch/arm/boot/dts/imx28-apf28.dts +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -14,67 +14,59 @@ device_type = "memory"; reg = <0x40000000 0x08000000>; }; +}; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x300000>; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - partition@300000 { - label = "env"; - reg = <0x300000 0x80000>; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; - partition@380000 { - label = "env2"; - reg = <0x380000 0x80000>; - }; + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; - partition@400000 { - label = "dtb"; - reg = <0x400000 0x80000>; - }; + partition@300000 { + label = "env"; + reg = <0x300000 0x80000>; + }; - partition@480000 { - label = "splash"; - reg = <0x480000 0x80000>; - }; + partition@380000 { + label = "env2"; + reg = <0x380000 0x80000>; + }; - partition@500000 { - label = "kernel"; - reg = <0x500000 0x800000>; - }; + partition@400000 { + label = "dtb"; + reg = <0x400000 0x80000>; + }; - partition@d00000 { - label = "rootfs"; - reg = <0xd00000 0xf300000>; - }; - }; - }; + partition@480000 { + label = "splash"; + reg = <0x480000 0x80000>; + }; - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; + partition@500000 { + label = "kernel"; + reg = <0x500000 0x800000>; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - status = "okay"; - }; + partition@d00000 { + label = "rootfs"; + reg = <0xd00000 0xf300000>; }; }; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1b253b47006c..4704b6141836 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -10,166 +10,6 @@ model = "Armadeus Systems APF28Dev docking/development board"; compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_apf28dev>; - - hog_pins_apf28dev: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D16__GPIO_1_16 - MX28_PAD_LCD_D17__GPIO_1_17 - MX28_PAD_LCD_D18__GPIO_1_18 - MX28_PAD_LCD_D19__GPIO_1_19 - MX28_PAD_LCD_D20__GPIO_1_20 - MX28_PAD_LCD_D21__GPIO_1_21 - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apf28dev: lcdif-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_apf28dev: otg-apf28dev@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_16bit_pins_a - &lcdif_pins_apf28dev>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <16>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can0_vcc>; - status = "okay"; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_apf28dev - &usb0_id_pins_b>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -223,3 +63,155 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can0_vcc>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_16bit_pins_a + &lcdif_pins_apf28dev>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_apf28dev>; + + hog_pins_apf28dev: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D16__GPIO_1_16 + MX28_PAD_LCD_D17__GPIO_1_17 + MX28_PAD_LCD_D18__GPIO_1_18 + MX28_PAD_LCD_D19__GPIO_1_19 + MX28_PAD_LCD_D20__GPIO_1_20 + MX28_PAD_LCD_D21__GPIO_1_21 + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apf28dev: lcdif-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_apf28dev: otg-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_apf28dev + &usb0_id_pins_b>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b86be320496b..f9bf40d96568 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -11,200 +11,6 @@ reg = <0x40000000 0x04000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; - bus-width = <4>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_RDY1__GPIO_0_21 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_JTAG_RTCK__GPIO_4_20 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_apx4: lcdif-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA4__SSP2_D0 - MX28_PAD_SSP0_DATA5__SSP2_D3 - MX28_PAD_SSP0_DATA6__SSP2_CMD - MX28_PAD_SSP0_DATA7__SSP2_SCK - MX28_PAD_SSP2_SS1__SSP2_D1 - MX28_PAD_SSP2_SS2__SSP2_D2 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__SSP2_SCK - >; - fsl,drive-strength = <MXS_DRIVE_12mA>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_apx4>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - vback-porch = <32>; - vfront-porch = <13>; - hsync-len = <48>; - vsync-len = <3>; - hsync-active = <1>; - vsync-active = <1>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - pcf8563: rtc@51 { - compatible = "phg,pcf8563"; - reg = <0x51>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_2pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -238,3 +44,189 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + vback-porch = <32>; + vfront-porch = <13>; + hsync-len = <48>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */ + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_JTAG_RTCK__GPIO_4_20 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA4__SSP2_D0 + MX28_PAD_SSP0_DATA5__SSP2_D3 + MX28_PAD_SSP0_DATA6__SSP2_CMD + MX28_PAD_SSP0_DATA7__SSP2_SCK + MX28_PAD_SSP2_SS1__SSP2_D1 + MX28_PAD_SSP2_SS2__SSP2_D2 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usbphy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index 85aa1cc3ff66..d004b1cbb4ae 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -16,107 +16,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - ssd1306_cfa10036: ssd1306-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_cfa10036: leds-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - usb0_otg_cfa10036: otg-10036@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDY0__USB0_ID - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { - reg = <0>; - fsl,pinmux-ids = < - 0x31c3 /* - MX28_PAD_PWM3__GPIO_3_28 */ - >; - fsl,drive-strength = <0>; - fsl,voltage = <1>; - fsl,pull-up = <0>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - vmmc-supply = <®_vddio_sd0>; - bus-width = <4>; - status = "okay"; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_b>; - clock-frequency = <400000>; - status = "okay"; - - ssd1306: oled@3c { - compatible = "solomon,ssd1306fb-i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&ssd1306_cfa10036>; - reg = <0x3c>; - reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - solomon,height = <32>; - solomon,width = <128>; - solomon,page-offset = <0>; - solomon,com-lrremap; - solomon,com-invdir; - solomon,com-offset = <32>; - }; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_otg_cfa10036>; - dr_mode = "peripheral"; - phy_type = "utmi"; - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -138,3 +37,95 @@ gpio = <&gpio3 28 0>; }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + clock-frequency = <400000>; + status = "okay"; + + ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&ssd1306_cfa10036>; + reg = <0x3c>; + reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + solomon,height = <32>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; + }; +}; + +&pinctrl { + ssd1306_cfa10036: ssd1306-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + usb0_otg_cfa10036: otg-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY0__USB0_ID + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c3 /* + MX28_PAD_PWM3__GPIO_3_28 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + vmmc-supply = <®_vddio_sd0>; + bus-width = <4>; + status = "okay"; +}; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_otg_cfa10036>; + dr_mode = "peripheral"; + phy_type = "utmi"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 9ef0d567ea48..94d6614c1983 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -78,226 +78,6 @@ }; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10049: usb-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - i2cmux_pins_cfa10049: i2cmux-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D22__GPIO_1_22 - MX28_PAD_LCD_D23__GPIO_1_23 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_pins_cfa10049: mac0-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS2__GPIO_2_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - pca_pins_cfa10049: pca-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_pins_cfa10049: rotary-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - rotary_btn_pins_cfa10049: rotary-btn-10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF1_SDATA0__GPIO_3_26 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi2_pins_cfa10049: spi2-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - spi3_pins_cfa10049: spi3-cfa10049@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_RDN__GPIO_0_24 - MX28_PAD_GPMI_RESETN__GPIO_0_28 - MX28_PAD_GPMI_CE1N__GPIO_0_17 - MX28_PAD_GPMI_ALE__GPIO_0_26 - MX28_PAD_GPMI_CLE__GPIO_0_27 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - w1_gpio_pins: w1-gpio@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D21__GPIO_1_21 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10049 - &lcdif_pins_cfa10049 - &lcdif_pins_cfa10049_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -315,18 +95,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a - &mac0_pins_cfa10049>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -426,3 +194,225 @@ gpios = <&gpio1 21 0>; }; }; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10049 + &lcdif_pins_cfa10049 + &lcdif_pins_cfa10049_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10049>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10049: usb-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + i2cmux_pins_cfa10049: i2cmux-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D22__GPIO_1_22 + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_pins_cfa10049: mac0-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS2__GPIO_2_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + pca_pins_cfa10049: pca-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_pins_cfa10049: rotary-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + rotary_btn_pins_cfa10049: rotary-btn-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF1_SDATA0__GPIO_3_26 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi2_pins_cfa10049: spi2-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + spi3_pins_cfa10049: spi3-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_RESETN__GPIO_0_28 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_ALE__GPIO_0_26 + MX28_PAD_GPMI_CLE__GPIO_0_27 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + w1_gpio_pins: w1-gpio@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D21__GPIO_1_21 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */ + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts index fac5bbda7a93..42ba7da48beb 100644 --- a/arch/arm/boot/dts/imx28-cfa10055.dts +++ b/arch/arm/boot/dts/imx28-cfa10055.dts @@ -14,121 +14,6 @@ model = "Crystalfontz CFA-10055 Board"; compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10055: spi2-cfa10055@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10055 - &lcdif_pins_cfa10055 - &lcdif_pins_cfa10055_pullup>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <9216000>; - hactive = <320>; - vactive = <480>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <15>; - vsync-len = <15>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -159,3 +44,112 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10055 + &lcdif_pins_cfa10055 + &lcdif_pins_cfa10055_pullup>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9216000>; + hactive = <320>; + vactive = <480>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <15>; + vsync-len = <15>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&pinctrl { + spi2_pins_cfa10055: spi2-cfa10055@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts index c5f3337e8b39..0e15bdfd7281 100644 --- a/arch/arm/boot/dts/imx28-cfa10056.dts +++ b/arch/arm/boot/dts/imx28-cfa10056.dts @@ -13,81 +13,6 @@ model = "Crystalfontz CFA-10056 Board"; compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - spi2_pins_cfa10056: spi2-cfa10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SCK__GPIO_2_16 - MX28_PAD_SSP2_MOSI__GPIO_2_17 - MX28_PAD_SSP2_MISO__GPIO_2_18 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_8mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - - lcdif_pins_cfa10056: lcdif-10056@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RESET__GPIO_3_30 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_ENABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10056 - &lcdif_pins_cfa10056_pullup >; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <32000000>; - hactive = <480>; - vactive = <800>; - hback-porch = <2>; - hfront-porch = <2>; - vback-porch = <2>; - vfront-porch = <2>; - hsync-len = <5>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - }; - spi-2 { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -111,3 +36,74 @@ }; }; }; + +&pinctrl { + spi2_pins_cfa10056: spi2-cfa10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__GPIO_2_16 + MX28_PAD_SSP2_MOSI__GPIO_2_17 + MX28_PAD_SSP2_MISO__GPIO_2_18 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + lcdif_pins_cfa10056: lcdif-10056@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10056 + &lcdif_pins_cfa10056_pullup >; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <32000000>; + hactive = <480>; + vactive = <800>; + hback-porch = <2>; + hfront-porch = <2>; + vback-porch = <2>; + vfront-porch = <2>; + hsync-len = <5>; + vsync-len = <5>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts index 2f7e479dbc74..27602c01f162 100644 --- a/arch/arm/boot/dts/imx28-cfa10057.dts +++ b/arch/arm/boot/dts/imx28-cfa10057.dts @@ -14,126 +14,6 @@ model = "Crystalfontz CFA-10057 Board"; compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10057: usb-10057@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D00__LCD_D0 - MX28_PAD_LCD_D01__LCD_D1 - MX28_PAD_LCD_D02__LCD_D2 - MX28_PAD_LCD_D03__LCD_D3 - MX28_PAD_LCD_D04__LCD_D4 - MX28_PAD_LCD_D05__LCD_D5 - MX28_PAD_LCD_D06__LCD_D6 - MX28_PAD_LCD_D07__LCD_D7 - MX28_PAD_LCD_D08__LCD_D8 - MX28_PAD_LCD_D09__LCD_D9 - MX28_PAD_LCD_D10__LCD_D10 - MX28_PAD_LCD_D11__LCD_D11 - MX28_PAD_LCD_D12__LCD_D12 - MX28_PAD_LCD_D13__LCD_D13 - MX28_PAD_LCD_D14__LCD_D14 - MX28_PAD_LCD_D15__LCD_D15 - MX28_PAD_LCD_D16__LCD_D16 - MX28_PAD_LCD_D17__LCD_D17 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10057: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_18bit_pins_cfa10057 - &lcdif_pins_cfa10057>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <480>; - vactive = <800>; - hfront-porch = <12>; - hback-porch = <2>; - vfront-porch = <5>; - vback-porch = <3>; - hsync-len = <2>; - vsync-len = <2>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - - i2c1: i2c@8005a000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -151,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -169,3 +38,124 @@ default-brightness-level = <7>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_cfa10057 + &lcdif_pins_cfa10057>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <12>; + hback-porch = <2>; + vfront-porch = <5>; + vback-porch = <3>; + hsync-len = <2>; + vsync-len = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10057: usb-10057@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D00__LCD_D0 + MX28_PAD_LCD_D01__LCD_D1 + MX28_PAD_LCD_D02__LCD_D2 + MX28_PAD_LCD_D03__LCD_D3 + MX28_PAD_LCD_D04__LCD_D4 + MX28_PAD_LCD_D05__LCD_D5 + MX28_PAD_LCD_D06__LCD_D6 + MX28_PAD_LCD_D07__LCD_D7 + MX28_PAD_LCD_D08__LCD_D8 + MX28_PAD_LCD_D09__LCD_D9 + MX28_PAD_LCD_D10__LCD_D10 + MX28_PAD_LCD_D11__LCD_D11 + MX28_PAD_LCD_D12__LCD_D12 + MX28_PAD_LCD_D13__LCD_D13 + MX28_PAD_LCD_D14__LCD_D14 + MX28_PAD_LCD_D15__LCD_D15 + MX28_PAD_LCD_D16__LCD_D16 + MX28_PAD_LCD_D17__LCD_D17 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10057: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts index 4465fd86785a..931c4d089b26 100644 --- a/arch/arm/boot/dts/imx28-cfa10058.dts +++ b/arch/arm/boot/dts/imx28-cfa10058.dts @@ -14,93 +14,6 @@ model = "Crystalfontz CFA-10058 Board"; compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - usb_pins_cfa10058: usb-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_cfa10058: lcdif-10058@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_cfa10058>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <13>; - vfront-porch = <29>; - hsync-len = <8>; - vsync-len = <8>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - fsl,lradc-touchscreen-wires = <4>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-0 = <&usb1_pins_a>; - pinctrl-names = "default"; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -118,17 +31,6 @@ }; }; - ahb@80080000 { - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -136,3 +38,91 @@ default-brightness-level = <6>; }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10058>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <13>; + vfront-porch = <29>; + hsync-len = <8>; + vsync-len = <8>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10058: usb-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10058: lcdif-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts index d451fa018d83..b73020ff1053 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts @@ -5,172 +5,13 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 485"; compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - rs485-red { label = "duckbill:red:rs485"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -182,3 +23,16 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts index 73f521c46c1e..473d99b9b42f 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts @@ -5,184 +5,14 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 EnOcean"; compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28"; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - MX28_PAD_AUART0_CTS__GPIO_3_2 - MX28_PAD_I2C0_SCL__GPIO_3_24 - MX28_PAD_I2C0_SDA__GPIO_3_25 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - enocean_button: enocean-button@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - enocean-blue { label = "duckbill:blue:enocean"; gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; @@ -211,3 +41,29 @@ }; }; }; + +&i2c0 { + status = "disabled"; +}; + +&led_pins { + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + MX28_PAD_AUART0_CTS__GPIO_3_2 + MX28_PAD_I2C0_SCL__GPIO_3_24 + MX28_PAD_I2C0_SDA__GPIO_3_25 + >; +}; + +&pinctrl { + enocean_button: enocean-button@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts index 0e8be5975709..859d97a5a775 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts @@ -5,9 +5,7 @@ */ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> -#include "imx28.dtsi" +#include "imx28-duckbill-2.dts" / { model = "I2SE Duckbill 2 SPI"; @@ -16,179 +14,50 @@ aliases { ethernet1 = &qca7000; }; +}; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x08000000>; - }; - - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - qca7000: ethernet@0 { - reg = <0>; - compatible = "qca,qca7000"; - pinctrl-names = "default"; - pinctrl-0 = <&qca7000_pins>; - interrupt-parent = <&gpio3>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - spi-cpha; - spi-cpol; - spi-max-frequency = <8000000>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: led@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - qca7000_pins: qca7000@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ - MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ - MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ - MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ - MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ - MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; +&auart0 { + status = "disabled"; +}; - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; +&i2c0 { + status = "disabled"; +}; - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; +&pinctrl { + qca7000_pins: qca7000@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART0_RTS__GPIO_3_3 /* Interrupt */ + MX28_PAD_LCD_D13__GPIO_1_13 /* QCA7K reset */ + MX28_PAD_LCD_D14__GPIO_1_14 /* GPIO 0 */ + MX28_PAD_LCD_D15__GPIO_1_15 /* GPIO 1 */ + MX28_PAD_LCD_D18__GPIO_1_18 /* GPIO 2 */ + MX28_PAD_LCD_D21__GPIO_1_21 /* GPIO 3 */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + /delete-property/ bus-width; + /delete-property/ vmmc-supply; + status = "okay"; + + qca7000: ethernet@0 { + reg = <0>; + compatible = "qca,qca7000"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - status-red { - label = "duckbill:red:status"; - gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - - status-green { - label = "duckbill:green:status"; - gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; + pinctrl-0 = <&qca7000_pins>; + interrupt-parent = <&gpio3>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <8000000>; }; }; diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts index 23fd3036404d..4e28212e9626 100644 --- a/arch/arm/boot/dts/imx28-duckbill-2.dts +++ b/arch/arm/boot/dts/imx28-duckbill-2.dts @@ -18,138 +18,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - status = "okay"; - non-removable; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_b - &mmc2_cd_cfg &mmc2_sck_cfg_b>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_int_pin: mac0-phy-int@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SAIF0_MCLK__GPIO_3_20 - MX28_PAD_SAIF0_LRCLK__GPIO_3_21 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_phy_int_pin>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - max-speed = <100>; - }; - }; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -176,3 +44,127 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_phy_int_pin>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + max-speed = <100>; + }; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_ALE__GPIO_0_26 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_int_pin: mac0-phy-int@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 /* PHY Interrupt */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SAIF0_MCLK__GPIO_3_20 + MX28_PAD_SAIF0_LRCLK__GPIO_3_21 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + vmmc-supply = <®_3p3v>; + status = "okay"; + non-removable; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_b + &mmc2_cd_cfg &mmc2_sck_cfg_b>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index c666afb12445..13ffd533fdea 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -17,108 +17,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_3p3v>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - mac0_phy_reset_pin: mac0-phy-reset@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins: leds@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_RX__GPIO_3_4 - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - }; - - apbx@80040000 { - lradc@80050000 { - status = "okay"; - }; - - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - status = "okay"; - dr_mode = "peripheral"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; - phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - phy-reset-duration = <25>; - status = "okay"; - }; - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -145,3 +43,97 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&lradc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>; + phy-supply = <®_3p3v>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D17__GPIO_1_17 /* Revision detection */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + mac0_phy_reset_pin: mac0-phy-reset@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins: leds@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_RX__GPIO_3_4 + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 1053b7c584d8..783abb82b2a8 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -95,266 +95,258 @@ }; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg - &gpmi_pins_evk>; - status = "okay"; - }; + sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio2 12 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; - ssp1: spi@80012000 { - compatible = "fsl,imx28-mmc"; - bus-width = <8>; - wp-gpios = <&gpio0 28 0>; - }; + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "sst,sst25vf016b", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; + backlight_display: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP1_CMD__GPIO_2_13 - MX28_PAD_SSP1_DATA3__GPIO_2_15 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - MX28_PAD_SSP1_SCK__GPIO_2_12 - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_LCD_RESET__GPIO_3_30 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_AUART2_TX__GPIO_3_9 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pin_gpio3_5: led_gpio3_5@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - gpmi_pins_evk: gpmi-nand-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_CE1N__GPMI_CE1N - MX28_PAD_GPMI_RDY1__GPMI_READY1 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_evk: lcdif-evk@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_RD_E__LCD_VSYNC - MX28_PAD_LCD_WR_RWN__LCD_HSYNC - MX28_PAD_LCD_RS__LCD_DOTCLK - MX28_PAD_LCD_CS__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + uart-has-rtscts; + status = "okay"; +}; - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_evk>; - status = "okay"; - - port { - display_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; +}; - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - xceiver-supply = <®_can_3v3>; - status = "okay"; - }; - }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; +}; - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + status = "okay"; - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - at24@51 { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x51>; - }; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; +&lradc { + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + status = "okay"; +}; - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - uart-has-rtscts; - status = "okay"; - }; + at24@51 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x51>; + }; +}; - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; - status = "okay"; - }; +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; - usbphy0: usbphy@8007c000 { - status = "okay"; - }; +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - }; +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP1_DATA3__GPIO_2_15 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - ahb@80080000 { - usb0: usb@80080000 { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_pins_a>; - vbus-supply = <®_usb0_vbus>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPMI_CE1N + MX28_PAD_GPMI_RDY1__GPMI_READY1 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; - sound { - compatible = "fsl,imx28-evk-sgtl5000", - "fsl,mxs-audio-sgtl5000"; - model = "imx28-evk-sgtl5000"; - saif-controllers = <&saif0 &saif1>; - audio-codec = <&sgtl5000>; + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pin_gpio3_5>; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; - user { - label = "Heartbeat"; - gpios = <&gpio3 5 0>; - linux,default-trigger = "heartbeat"; - }; - }; +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; - backlight_display: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 2 5000000>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp1 { + compatible = "fsl,imx28-mmc"; + bus-width = <8>; + wp-gpios = <&gpio0 28 0>; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; + spi-max-frequency = <40000000>; }; }; + +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_a>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 2bdb4c093545..c08b14ad7cd5 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -14,31 +14,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@68 { - compatible = "st,m41t62"; - reg = <0x68>; - }; - }; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -54,3 +29,22 @@ }; }; }; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index 865ac3d573c7..6b01de9efd02 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -15,187 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - nand-controller@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "gpmi-nfc-0-boot"; - reg = <0x00000000 0x01400000>; - read-only; - }; - - partition@1 { - label = "gpmi-nfc-general-use"; - reg = <0x01400000 0x0ec00000>; - }; - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_4bit_pins_a - &mmc2_cd_cfg - &mmc2_sck_cfg_a>; - bus-width = <4>; - vmmc-supply = <®_vddio_sd1>; - status = "okay"; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP2_SS0__GPIO_2_19 - MX28_PAD_PWM4__GPIO_3_29 - MX28_PAD_AUART2_RX__GPIO_3_8 - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_VSYNC__LCD_VSYNC - MX28_PAD_LCD_HSYNC__LCD_HSYNC - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_RESET__LCD_RESET - MX28_PAD_LCD_CS__LCD_ENABLE - MX28_PAD_AUART1_TX__GPIO_3_5 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - led_pins_gpio: leds-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_SSP3_MISO__GPIO_2_26 - MX28_PAD_SSP3_SCK__GPIO_2_24 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - ocotp@8002c000 { - status = "okay"; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <6410256>; - hactive = <320>; - vactive = <240>; - hback-porch = <38>; - hfront-porch = <20>; - vback-porch = <15>; - vfront-porch = <5>; - hsync-len = <30>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - }; - - apbx@80040000 { - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_b>; - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; - status = "okay"; - }; - - auart3: serial@80070000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart3_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm3_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - disable-over-current; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <100>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; @@ -264,3 +83,176 @@ }; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; +}; + +&auart3 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; +}; + +&gpmi { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "gpmi-nfc-0-boot"; + reg = <0x00000000 0x01400000>; + read-only; + }; + + partition@1 { + label = "gpmi-nfc-general-use"; + reg = <0x01400000 0x0ec00000>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <6410256>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hfront-porch = <20>; + vback-porch = <15>; + vfront-porch = <5>; + hsync-len = <30>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&ocotp { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP2_SS0__GPIO_2_19 + MX28_PAD_PWM4__GPIO_3_29 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_VSYNC__LCD_VSYNC + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_RESET__LCD_RESET + MX28_PAD_LCD_CS__LCD_ENABLE + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pins_gpio: leds-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP3_MISO__GPIO_2_26 + MX28_PAD_SSP3_SCK__GPIO_2_24 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_a + &mmc2_cd_cfg + &mmc2_sck_cfg_a>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd1>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 13acdc7916b9..e350d57a4cec 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -11,220 +11,6 @@ model = "Aries/DENX M28EVK"; compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28"; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a - &mmc0_cd_cfg - &mmc0_sck_cfg>; - bus-width = <8>; - wp-gpios = <&gpio3 10 0>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p80", "jedec,spi-nor"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - MX28_PAD_AUART2_CTS__GPIO_3_10 - MX28_PAD_AUART2_RTS__GPIO_3_11 - MX28_PAD_AUART3_RX__GPIO_3_12 - MX28_PAD_AUART3_TX__GPIO_3_13 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - lcdif_pins_m28: lcdif-m28@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK - MX28_PAD_LCD_ENABLE__LCD_ENABLE - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - }; - - lcdif@80030000 { - pinctrl-names = "default"; - pinctrl-0 = <&lcdif_24bit_pins_a - &lcdif_pins_m28>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <33260000>; - hactive = <800>; - vactive = <480>; - hback-porch = <0>; - hfront-porch = <256>; - vback-porch = <0>; - vfront-porch = <45>; - hsync-len = <1>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - }; - - can0: can@80032000 { - pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; - status = "okay"; - }; - - can1: can@80034000 { - pinctrl-names = "default"; - pinctrl-0 = <&can1_pins_a>; - status = "okay"; - }; - }; - - apbx@80040000 { - saif0: saif@80042000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif0_pins_a>; - status = "okay"; - }; - - saif1: saif@80046000 { - pinctrl-names = "default"; - pinctrl-0 = <&saif1_pins_a>; - fsl,saif-master = <&saif0>; - status = "okay"; - }; - - i2c0: i2c@80058000 { - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - #sound-dai-cells = <0>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&saif0>; - }; - - eeprom: eeprom@51 { - compatible = "atmel,24c128"; - reg = <0x51>; - pagesize = <32>; - }; - }; - - lradc@80050000 { - status = "okay"; - fsl,lradc-touchscreen-wires = <4>; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - usbphy1: usbphy@8007e000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - - auart1: serial@8006c000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart1_pins_a>; - status = "okay"; - }; - - auart2: serial@8006e000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart2_2pins_b>; - status = "okay"; - }; - - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm4_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_a>; - status = "okay"; - }; - - usb1: usb@80090000 { - vbus-supply = <®_usb1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins_a>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - clocks = <&clks 57>, <&clks 57>; - clock-names = "ipg", "ahb"; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 4 5000000>; @@ -269,3 +55,209 @@ audio-codec = <&sgtl5000>; }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&auart1 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; +}; + +&auart2 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_b>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33260000>; + hactive = <800>; + vactive = <480>; + hback-porch = <0>; + hfront-porch = <256>; + vback-porch = <0>; + vfront-porch = <45>; + hsync-len = <1>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_AUART2_CTS__GPIO_3_10 + MX28_PAD_AUART2_RTS__GPIO_3_11 + MX28_PAD_AUART3_RX__GPIO_3_12 + MX28_PAD_AUART3_TX__GPIO_3_13 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80", "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_a>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts index 90928db0df70..5d74a68c56ff 100644 --- a/arch/arm/boot/dts/imx28-sps1.dts +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -15,111 +15,6 @@ reg = <0x40000000 0x08000000>; }; - apb@80000000 { - apbh@80000000 { - pinctrl@80018000 { - pinctrl-names = "default"; - pinctrl-0 = <&hog_pins_a>; - - hog_pins_a: hog-gpios@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_GPMI_D00__GPIO_0_0 - MX28_PAD_GPMI_D03__GPIO_0_3 - MX28_PAD_GPMI_D06__GPIO_0_6 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a>; - bus-width = <4>; - status = "okay"; - }; - - ssp2: spi@80014000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - - flash: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256", "mr25h256"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; - }; - - apbx@80040000 { - i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - rtc: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - eeprom: eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - pagesize = <32>; - }; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - - usbphy0: usbphy@8007c000 { - status = "okay"; - }; - - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_pins_a>; - status = "okay"; - }; - }; - }; - - ahb@80080000 { - usb0: usb@80080000 { - vbus-supply = <®_usb0_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_pins_b>; - status = "okay"; - }; - - mac0: ethernet@800f0000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - status = "okay"; - }; - - mac1: ethernet@800f4000 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&mac1_pins_a>; - status = "okay"; - }; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -164,3 +59,99 @@ }; }; + +&auart0 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D06__GPIO_0_6 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; +}; + +&ssp2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts index 0d58da1c0cc5..ae6ed5c41be3 100644 --- a/arch/arm/boot/dts/imx28-ts4600.dts +++ b/arch/arm/boot/dts/imx28-ts4600.dts @@ -18,50 +18,6 @@ reg = <0x40000000 0x10000000>; /* 256MB */ }; - apb@80000000 { - apbh@80000000 { - ssp0: spi@80010000 { - compatible = "fsl,imx28-mmc"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a - &mmc0_sck_cfg - &en_sd_pwr>; - broken-cd; - bus-width = <4>; - vmmc-supply = <®_vddio_sd0>; - status = "okay"; - }; - - pinctrl@80018000 { - - en_sd_pwr: en-sd-pwr@0 { - reg = <0>; - fsl,pinmux-ids = < - MX28_PAD_PWM3__GPIO_3_28 - >; - fsl,drive-strength = <MXS_DRIVE_4mA>; - fsl,voltage = <MXS_VOLTAGE_HIGH>; - fsl,pull-up = <MXS_PULL_DISABLE>; - }; - - }; - }; - - apbx@80040000 { - pwm: pwm@80064000 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm2_pins_a>; - status = "okay"; - }; - - duart: serial@80074000 { - pinctrl-names = "default"; - pinctrl-0 = <&duart_pins_a>; - status = "okay"; - }; - }; - }; - reg_vddio_sd0: regulator-vddio-sd0 { compatible = "regulator-fixed"; regulator-name = "vddio-sd0"; @@ -72,3 +28,39 @@ }; }; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&pinctrl { + en_sd_pwr: en-sd-pwr@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_PWM3__GPIO_3_28 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_sck_cfg + &en_sd_pwr>; + broken-cd; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 096f246032c6..ffe58c7093e1 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2012 Shawn Guo <shawn.guo@linaro.org> * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts index e8325fd680d9..e6a4e2770640 100644 --- a/arch/arm/boot/dts/imx6dl-alti6p.dts +++ b/arch/arm/boot/dts/imx6dl-alti6p.dts @@ -22,6 +22,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; i2c2-mux { @@ -191,6 +192,13 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -208,10 +216,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts index 864dc5018451..33825b5a8f26 100644 --- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts +++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts @@ -28,6 +28,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { @@ -64,6 +65,13 @@ status = "okay"; }; +&clks { + clocks = <&rmii_clk>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&rmii_clk>; +}; + &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; @@ -297,11 +305,6 @@ phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&rmii_clk>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts index 6b6e6fcdea9c..fa823988312d 100644 --- a/arch/arm/boot/dts/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts @@ -21,6 +21,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; backlight: backlight { @@ -109,14 +110,17 @@ status = "okay"; }; +&clks { + clocks = <&clock_ksz8081>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clock_ksz8081>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index c52e6caf3996..e98046eea7a4 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -75,6 +75,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_5v0: regulator-5v0 { @@ -99,6 +100,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -116,10 +124,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts index 522660c912a0..e3c10483f33b 100644 --- a/arch/arm/boot/dts/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -84,6 +84,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -173,6 +174,13 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi1 { cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -254,10 +262,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rgmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts index 1f8cddd83ccb..5f4fa796ca18 100644 --- a/arch/arm/boot/dts/imx6dl-prtmvt.dts +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -193,6 +193,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_1v8: regulator-1v8 { @@ -293,8 +294,10 @@ }; &clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>; }; &ecspi1 { @@ -314,10 +317,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts index 72df1dba83be..23274be08e61 100644 --- a/arch/arm/boot/dts/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -54,6 +54,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; rotary-encoder { @@ -134,6 +135,13 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &ecspi2 { cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -182,10 +190,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-handle = <&rmii_phy>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index aacbf317feea..3be38a3c4bb1 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -98,7 +98,6 @@ regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; - status = "okay"; }; }; @@ -106,8 +105,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - phy-reset-duration = <20>; phy-supply = <&sw2_reg>; status = "okay"; @@ -131,6 +128,7 @@ switch@10 { compatible = "qca,qca8334"; reg = <10>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; switch_ports: ports { #address-cells = <1>; @@ -270,9 +268,9 @@ compatible = "ti,lp5562"; reg = <0x30>; clock-mode = /bits/ 8 <1>; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; led@0 { chan-name = "R"; @@ -303,7 +301,6 @@ compatible = "atmel,24c128"; reg = <0x57>; pagesize = <64>; - status = "okay"; }; touchscreen: touchscreen@5c { @@ -313,7 +310,7 @@ interrupt-parent = <&gpio4>; interrupts = <5 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <480>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts new file mode 100644 index 000000000000..5c2cd517589b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Lynx i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&backlight { + status = "okay"; +}; + +&lcd_display { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&panel { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchscreen { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts new file mode 100644 index 000000000000..e0292f11d03e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Phoenix i.MX6DualLite board"; + compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; +}; + +&aliases { + /delete-property/ ethernet1; +}; + +&gpio_keys { + status = "okay"; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&switch_ports { + /delete-node/ port@2; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi new file mode 100644 index 000000000000..52a0f6ee426f --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases: aliases { + ethernet1 = ð1; + ethernet2 = ð2; + mmc0 = &usdhc3; + mmc1 = &usdhc4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 32 64 128 255>; + default-brightness-level = <32>; + num-interpolated-steps = <8>; + power-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + status = "disabled"; + + button { + label = "Factory RESET"; + linux,code = <BTN_0>; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + }; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + compatible = "dataimage,scf0700c48ggu18"; + power-supply = <&sw2_reg>; + backlight = <&backlight>; + enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + status = "disabled"; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + status = "disabled"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-supply = <&sw2_reg>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + + switch_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: port@0 { + reg = <0>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <&fec>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + eth2: port@1 { + reg = <1>; + label = "eth2"; + phy-handle = <&phy_port1>; + }; + + eth1: port@2 { + reg = <2>; + label = "eth1"; + phy-handle = <&phy_port2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy_port1: switchphy@11 { + reg = <0x11>; + }; + + phy_port2: switchphy@12 { + reg = <0x12>; + }; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze200"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vsnvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + leds: led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/ 8 <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + led@0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + pagesize = <64>; + }; + + touchscreen: touchscreen@5c { + compatible = "pixcir,pixcir_tangoc"; + reg = <0x5c>; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + status = "disabled"; + }; + + rtc: rtc@68 { + compatible = "dallas,ds1341"; + reg = <0x68>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "disabled"; + + oled_1309: oled@3c { + compatible = "solomon,ssd1309fb-i2c"; + reg = <0x3c>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,segment-no-remap; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + oled_1305: oled@3d { + compatible = "solomon,ssd1305fb-i2c"; + reg = <0x3d>; + solomon,height = <64>; + solomon,width = <128>; + solomon,page-offset = <0>; + solomon,col-offset = <4>; + solomon,prechargep2 = <15>; + reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; + vbat-supply = <&sw2_reg>; + status = "disabled"; + }; + + gpio_oled: gpio@41 { + compatible = "nxp,pca9536"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x41>; + vcc-supply = <&sw2_reg>; + status = "disabled"; + }; + + touchkeys: keys@5a { + compatible = "fsl,mpr121-touchkey"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchkeys>; + reg = <0x5a>; + vdd-supply = <&sw2_reg>; + autorepeat; + linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, + <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, + <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; + poll-interval = <50>; + status = "disabled"; + }; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 + >; + }; + + pinctrl_touchkeys: touchkeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b098 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-d-cal = <106>; + status = "okay"; +}; + +&usbphy2 { + fsl,tx-d-cal = <109>; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + vmmc-supply = <&sw2_reg>; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts index 349959d38020..54a57a4548e2 100644 --- a/arch/arm/boot/dts/imx6q-prtwd2.dts +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -22,6 +22,13 @@ reg = <0x80000000 0x20000000>; }; + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; + }; + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -49,13 +56,17 @@ status = "okay"; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>; - clock-names = "ipg", "ahb"; status = "okay"; fixed-link { diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts new file mode 100644 index 000000000000..ec6651ba4ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus i.MX6Quad board"; + compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi index 3def1b621c8e..2731faede1cb 100644 --- a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi @@ -105,6 +105,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet_ref_pad"; }; reg_3v3: regulator-3v3 { @@ -232,13 +233,16 @@ }; }; +&clks { + clocks = <&clk50m_phy>; + clock-names = "enet_ref_pad"; + assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>; + assigned-clock-parents = <&clk50m_phy>; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&clk50m_phy>; - clock-names = "ipg", "ahb", "ptp"; phy-mode = "rmii"; phy-supply = <®_3v3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 41e08fa23cce..b72ec745f6d1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1049,8 +1049,8 @@ clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET_REF>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; + <&clks IMX6QDL_CLK_ENET_REF_SEL>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; fsl,stop-mode = <&gpr 0x34 27>; nvmem-cells = <&fec_mac_addr>; nvmem-cell-names = "mac-address"; diff --git a/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts new file mode 100644 index 000000000000..4a961a33bf2d --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-yapp4-pegasus-plus.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2021 Y Soft Corporation, a.s. + +/dts-v1/; + +#include "imx6qp.dtsi" +#include "imx6dl-yapp43-common.dtsi" + +/ { + model = "Y Soft IOTA Pegasus+ i.MX6QuadPlus board"; + compatible = "ysoft,imx6qp-yapp4-pegasus-plus", "fsl,imx6qp"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; +}; + +&gpio_oled { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&leds { + status = "okay"; +}; + +&oled_1305 { + status = "okay"; +}; + +&oled_1309 { + status = "okay"; +}; + +®_pu { + regulator-always-on; +}; + +®_usb_h1_vbus { + status = "okay"; +}; + +&touchkeys { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/imx6sl-tolino-vision.dts new file mode 100644 index 000000000000..2694fe18a91b --- /dev/null +++ b/arch/arm/boot/dts/imx6sl-tolino-vision.dts @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device tree for the Tolino Vison ebook reader + * + * Name on mainboard is: 37NB-E60Q30+4A3 + * Serials start with: 6032 + * + * Copyright 2023 Andreas Kemnade + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "imx6sl.dtsi" + +/ { + model = "Tolino Vision"; + compatible = "kobo,tolino-vision", "fsl,imx6sl"; + + aliases { + mmc0 = &usdhc4; + mmc1 = &usdhc2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-backlight { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_power>; + regulator-name = "backlight"; + gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-cover { + /* magnetic sensor in the corner next to the uSD slot */ + label = "Cover"; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + + key-fl { + label = "Frontlight"; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BRIGHTNESS_CYCLE>; + }; + + key-power { + label = "Power"; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + /* LED on home button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + }; + + led-1 { + /* LED on power button */ + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_POWER; + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_power>; + regulator-name = "SD3_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 29 GPIO_ACTIVE_LOW>; + }; + + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reset>; + post-power-on-delay-ms = <20>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_sleep>; + status = "okay"; + + touchscreen@15 { + compatible = "elan,ektf2132"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + power-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio5 6 IRQ_TYPE_EDGE_FALLING>; + }; + + accelerometer@1d { + compatible = "fsl,mma8652"; + reg = <0x1d>; + }; +}; + +&i2c2 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_sleep>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + ec: embedded-controller@43 { + compatible = "netronix,ntxec"; + reg = <0x43>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec>; + interrupts-extended = <&gpio5 11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + }; +}; + +&snvs_rtc { + /* + * We are using the RTC in the PMIC, but this one is not disabled + * in imx6sl.dtsi. + */ + status = "disabled"; +}; + +&uart1 { + /* J4 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart4 { + /* J9 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>; + cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* removable uSD card */ +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>; + vmmc-supply = <®_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + cap-power-off-card; + non-removable; + status = "okay"; + + /* CyberTan WC121 (BCM43362) SDIO WiFi */ +}; + +&usdhc4 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc4>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + pinctrl-3 = <&pinctrl_usdhc4_sleep>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; + + /* internal eMMC */ +}; + +&usbotg1 { + pinctrl-names = "default"; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight_power: backlight-powergrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 + >; + }; + + pinctrl_ec: ecgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT0__GPIO5_IO11 0x17000 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x110B0 + MX6SL_PAD_SD1_DAT4__GPIO5_IO12 0x110B0 + MX6SL_PAD_KEY_COL1__GPIO3_IO26 0x11030 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c1_sleep: i2c1-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1 + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1 + >; + }; + + pinctrl_i2c2_sleep: i2c2-sleepgrp { + fsl,pins = < + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1 + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1 + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x17059 + MX6SL_PAD_SD1_DAT7__GPIO5_IO10 0x17059 + MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x17059 + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x110B0 + MX6SL_PAD_SD1_DAT3__GPIO5_IO06 0x1B0B1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x13059 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x1b0b1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130b9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6SL_PAD_SD2_CLK__SD2_CLK 0x130f9 + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD2_CMD__GPIO5_IO04 0x100f9 + MX6SL_PAD_SD2_CLK__GPIO5_IO05 0x100f9 + MX6SL_PAD_SD2_DAT0__GPIO5_IO01 0x100f9 + MX6SL_PAD_SD2_DAT1__GPIO4_IO30 0x100f9 + MX6SL_PAD_SD2_DAT2__GPIO5_IO03 0x100f9 + MX6SL_PAD_SD2_DAT3__GPIO4_IO28 0x100f9 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9 + MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1 + MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1 + MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1 + MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1 + MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1 + MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x17059 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x13059 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x17059 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x17059 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x17059 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x17059 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x17059 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x17059 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x17059 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x17059 + MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170b9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130b9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170b9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170b9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170b9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170b9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170b9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170b9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170b9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhzgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170f9 + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x130f9 + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170f9 + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170f9 + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170f9 + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170f9 + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170f9 + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170f9 + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170f9 + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4_sleep: usdhc4-sleepgrp { + fsl,pins = < + MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x100c1 + MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x100c1 + MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x100c1 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x100c1 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x100c1 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x100c1 + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x100c1 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x100c1 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x100c1 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x100c1 + >; + }; + + pinctrl_wifi_power: wifi-powergrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */ + >; + }; + + pinctrl_wifi_reset: wifi-resetgrp { + fsl,pins = < + MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts index c18390f238e1..b7c96fbe7a91 100644 --- a/arch/arm/boot/dts/imx6ul-prti6g.dts +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -26,6 +26,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "enet1_ref_pad"; }; leds { @@ -60,6 +61,13 @@ status = "okay"; }; +&clks { + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&clock_ksz8081_out>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "enet1_ref_pad"; + assigned-clocks = <&clks IMX6UL_CLK_ENET1_REF_SEL>; + assigned-clock-parents = <&clock_ksz8081_out>; +}; + &ecspi1 { cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; @@ -85,12 +93,6 @@ pinctrl-0 = <&pinctrl_eth1>; phy-mode = "rmii"; phy-handle = <&rmii_phy>; - clocks = <&clks IMX6UL_CLK_ENET>, - <&clks IMX6UL_CLK_ENET_AHB>, - <&clks IMX6UL_CLK_ENET_PTP>, - <&clock_ksz8081_out>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref"; status = "okay"; mdio { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index f0a9139748b8..3d9d0f823568 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -531,10 +531,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET2_REF_125M>, - <&clks IMX6UL_CLK_ENET2_REF_125M>; + <&clks IMX6UL_CLK_ENET2_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 4>; @@ -879,10 +878,9 @@ clocks = <&clks IMX6UL_CLK_ENET>, <&clks IMX6UL_CLK_ENET_AHB>, <&clks IMX6UL_CLK_ENET_PTP>, - <&clks IMX6UL_CLK_ENET_REF>, - <&clks IMX6UL_CLK_ENET_REF>; + <&clks IMX6UL_CLK_ENET1_REF_SEL>; clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; + "enet_clk_ref"; fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 3>; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi new file mode 100644 index 000000000000..3fdece5bd31f --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-common.dtsi @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pwm/pwm.h> +#include "imx6ull.dtsi" + +/ { + aliases { + mmc0 = &usdhc2; /* eMMC */ + }; + + chosen { + stdout-path = &uart4; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&pinctrl_emmc_rst>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; + }; + + reg_dcdc_3v3: regulator-dcdc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "dcdc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "ldo-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_status_leds>; + + led-1 { + function = LED_FUNCTION_BOOT; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + + led-2 { + function = LED_FUNCTION_PROGRAMMING; + color = <LED_COLOR_ID_YELLOW>; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_motor + &pinctrl_adc_cp + &pinctrl_adc_pp>; + vref-supply = <&vgen1_reg>; + status = "okay"; +}; + +&cpu0 { + clock-frequency = <792000000>; +}; + +&ecspi2 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + num-cs = <3>; + cs-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH + &gpio3 2 GPIO_ACTIVE_HIGH + &gpio3 4 GPIO_ACTIVE_HIGH>; +}; + +&ecspi4 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + num-cs = <1>; + cs-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1 + &pinctrl_enet1_phy_rst + &pinctrl_enet_mdio>; + phy-supply = <®_dcdc_3v3>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <25>; + phy-handle = <ðphy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1_phy_int>; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio2 7 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + max-speed = <100>; + smsc,disable-energy-detect; + }; + }; +}; + +&gpio1 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "CP_INVERT", + "", + "", /* 15 */ + "", + "", + "", + "MOTOR_1_FAULT_N", + "", /* 20 */ + "", + "ROTARY_SWITCH_1_2_N", + "ROTARY_SWITCH_1_4_N", + "ROTARY_SWITCH_1_8_N", + "MOTOR_2_FAULT_N"; /* 25 */ +}; + +&gpio3 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "EXT_GPIO", + "MOTOR_1_DRIVER_IN1_N", + "MOTOR_1_DRIVER_IN2", + "MOTOR_2_DRIVER_IN1", + "STM32_BOOT0", /* 10 */ + "STM32_RST_N", + "RELAY_1_ENABLE", + "RELAY_2_ENABLE", + "", + "", /* 15 */ + "QCA700X_MAINS_BOOTLOADER_N", + "QCA700X_CP_RST_N", + "QCA700X_CP_BOOTLOADER_N", + "", + "DIGITAL_OUT_1", /* 20 */ + "DIGITAL_OUT_2", + "DIGITAL_OUT_3", + "DIGITAL_OUT_4", + "DIGITAL_OUT_5", + "DIGITAL_OUT_6", /* 25 */ + "ROTARY_SWITCH_2_8_N", + "ROTARY_SWITCH_2_4_N", + "ROTARY_SWITCH_2_2_N"; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", /* 5 */ + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "BOARD_VARIANT_1", + "BOARD_VARIANT_2", + "BOARD_VARIANT_0", /* 15 */ + "BOARD_VARIANT_3", + "", + "ROTARY_SWITCH_2_1_N", + "", + "DIGITAL_IN_5", /* 20 */ + "", + "", + "DIGITAL_IN_6", + "", + "DIGITAL_IN_1", /* 25 */ + "DIGITAL_IN_2", + "DIGITAL_IN_4", + "DIGITAL_IN_3"; + + pmic-int-hog { + gpio-hog; + gpios = <19 0>; + input; + }; +}; + +&gpio5 { + gpio-line-names = "ROTARY_SWITCH_1_1_N", /* 0 */ + "", + "RELAY_2_SENSE", + "RELAY_1_SENSE", + "", + "", /* 5 */ + "", + "QCA700X_MAINS_RST_N", + "MOTOR_2_DRIVER_IN2", + "", + "CP_POSITIVE_PEAK_RST", /* 10 */ + "CP_NEGATIVE_PEAK_RST"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pfuze3001: pmic@8 { + compatible = "fsl,pfuze3001"; + reg = <0x08>; + + regulators { + sw1_reg: sw1 { + regulator-name = "SW1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-name = "SW2"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-name = "SW3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-name = "VSNVS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-name = "VLDO1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-name = "VLDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vccsd { + regulator-name = "VCCSD"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-name = "V33"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-name = "VLDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-name = "VLDO4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + onewire@18 { + compatible = "maxim,ds2484"; + reg = <0x18>; + }; + + accelerometer@19 { + compatible = "st,iis328dq", "st,h3lis331dl-accel"; + reg = <0x19>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accelerometer_int1_snvs>; + vdd-supply = <®_dcdc_3v3>; + vddio-supply = <®_dcdc_3v3>; + st,drdy-int-pin = <1>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_board_var + &pinctrl_digital_input + &pinctrl_digital_output + &pinctrl_gpio_motor + &pinctrl_hog_pins + &pinctrl_rotary_switch1 + &pinctrl_rotary_switch2>; + + pinctrl_adc_cp: adc-cpgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_adc_motor: adc-motorgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0 + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_adc_pp: adc-ppgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0xb0 + >; + }; + + pinctrl_board_var: board-vargrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__GPIO4_IO15 0xb0 + MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0xb0 + MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0xb0 + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0 + >; + }; + + pinctrl_digital_input: digital-inputgrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0xb0 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0xb0 + MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0xb0 + MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0xb0 + MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0xb0 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0xb0 + >; + }; + + pinctrl_digital_output: digital-outputgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x400000b0 + MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x400000b0 + MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x400000b0 + MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x400000b0 + MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x400000b0 + MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x400000b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x10b0 + MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0xb0 + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xb0 + MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x10b0 + MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x10b0 + MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x10b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x10b0 + MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x10b0 + MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x10b0 + MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x10b0 + >; + }; + + pinctrl_emmc_rst: emmc-rstgrp { + fsl,pins = < + MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x400010b0 + >; + }; + + pinctrl_enet_mdio: enet-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10b0 + >; + }; + + pinctrl_enet1_phy_int: enet1-phy-intgrp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x100b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x100b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x400000b1 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0xb0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0xb0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0xb0 + >; + }; + + pinctrl_ext_uart: ext-uartgrp { + fsl,pins = < + MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0xb0 + MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0xb0 + >; + }; + + pinctrl_fan_enable: fan-enablegrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x400000b0 + >; + }; + + pinctrl_gpio_motor: gpio-motorgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x400000b0 + MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x400000b0 + MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x400000b0 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0xb0 + MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0xb0 + >; + }; + + pinctrl_hog_pins: hog-pinsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x400000b0 + MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x400000b0 + MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x400070a0 + MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x400000b0 + MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x400000b0 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x400008b0 + >; + }; + + pinctrl_i2c4_gpio: i2c4-gpiogrp { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x400008b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x400008b0 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x70b1 + MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0xb0 + >; + }; + + pinctrl_pwm_cp: pinctrl-pwm-cpgrp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x60a0 + >; + }; + + pinctrl_pwm_digital_input_ref: pwm-digital-input-refgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0xb0 + >; + }; + + pinctrl_pwm_fan: pwm-fangrp { + fsl,pins = < + MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x60a0 + >; + }; + + pinctrl_qca700x_cp_btld: qca700x-cp-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x400000b0 + >; + }; + + pinctrl_qca700x_cp_int: qca700x-cp-intgrp { + fsl,pins = < + MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x10b0 + >; + }; + + pinctrl_qca700x_cp_rst: qca700x-cp-rstgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x400000b0 + >; + }; + + pinctrl_qca700x_mains_btld: qca700x-mains-btldgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x400000b0 + >; + }; + + pinctrl_rotary_switch1: rotary-switch1grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0xb0 + MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0xb0 + MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0xb0 + >; + }; + + pinctrl_rotary_switch2: rotary-switch2grp { + fsl,pins = < + MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0xb0 + MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0xb0 + MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0xb0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0xb0 + >; + }; + + pinctrl_rs485_1: rs485-1grp { + fsl,pins = < + MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0xb0 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0xb0 + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0xb0 + >; + }; + + pinctrl_rs485_2: rs485-2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 + MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x10b0 + MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x10b0 + >; + }; + + pinctrl_status_leds: status-ledsgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0xb0 + MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0xb0 + MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0xb0 + >; + }; + + pinctrl_stm32: stm32grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x10b0 + MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0xb0 + MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0xb0 + >; + }; + + pinctrl_usb: usbgrp { + fsl,pins = < + MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x70b0 + MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x70b0 + >; + }; + + pinctrl_usb_pwr: usb-pwrgrp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0xb0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x7071 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x7071 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x7071 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x7071 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x7071 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x7071 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x7071 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x7071 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x7071 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x7071 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70b1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70b1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70b1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70b1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70b1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70b1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70b1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70b1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70b1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70b1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x70f1 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x70f1 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x70f1 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x70f1 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x70f1 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x70f1 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x70f1 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x70f1 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x70f1 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x70f1 + >; + }; + + pinctrl_wdog2: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x10b0 + >; + }; +}; + +&iomuxc_snvs { + pinctrl-names = "default_snvs"; + pinctrl-0 = <&pinctrl_cp_peak_snvs + &pinctrl_gpio_motor_snvs + &pinctrl_relay_sense_snvs + &pinctrl_rotary_switch1_snvs>; + + pinctrl_accelerometer_int1_snvs: accelerometer-int1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x130a0 + >; + }; + + pinctrl_cp_peak_snvs: cp-peak-snvsgrp { + fsl,pins = < + MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x130a0 + MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 + >; + }; + + pinctrl_enet1_phy_rst: enet1-phy-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x100a0 + >; + }; + + pinctrl_fan_sense_snvs: fan-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x100a0 + >; + }; + + pinctrl_gpio_motor_snvs: gpio-motor-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 + >; + }; + + pinctrl_qca700x_mains_int: qca700x-mains-intgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x130a0 + >; + }; + + pinctrl_qca700x_mains_rst: qca700x-mains-rstgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x400100a0 + >; + }; + + pinctrl_relay_sense_snvs: relay-sense-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x100a0 + MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x100a0 + >; + }; + + pinctrl_rotary_switch1_snvs: rotary-switch1-snvsgrp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x110a0 + >; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_digital_input_ref>; + status = "okay"; +}; + +&pwm8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_cp>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,dte-mode; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rs485_2>; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stm32>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_uart>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb + &pinctrl_usb_pwr>; + dr_mode = "host"; + power-active-high; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphy1 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usbphy2 { + fsl,tx-cal-45-dn-ohms = <35>; + fsl,tx-cal-45-dp-ohms = <35>; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <&sw2_reg>; + vqmmc-supply = <®_1v8>; + mmc-pwrseq = <&emmc_pwrseq>; + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog2>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-master.dts b/arch/arm/boot/dts/imx6ull-tarragon-master.dts new file mode 100644 index 000000000000..67007ce383e3 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-master.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Master"; + compatible = "chargebyte,imx6ull-tarragon-master", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&ecspi4 { + status = "okay"; + + qca700x_mains: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_mains_int + &pinctrl_qca700x_mains_rst + &pinctrl_qca700x_mains_btld>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-micro.dts b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts new file mode 100644 index 000000000000..e471c2005bee --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-micro.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Micro"; + compatible = "chargebyte,imx6ull-tarragon-micro", "fsl,imx6ull"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slave.dts b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts new file mode 100644 index 000000000000..cee223b5f8e1 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slave.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon Slave"; + compatible = "chargebyte,imx6ull-tarragon-slave", "fsl,imx6ull"; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts new file mode 100644 index 000000000000..7fd53b7a4372 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-tarragon-slavext.dts @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright (C) 2023 chargebyte GmbH + +#include "imx6ull-tarragon-common.dtsi" + +/ { + model = "chargebyte Tarragon SlaveXT"; + compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull"; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm7 0 40000 PWM_POLARITY_INVERTED>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_sense_snvs>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + + reg_fan: regulator { + compatible = "regulator-fixed"; + regulator-name = "fan-supply"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan_enable>; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ecspi2 { + status = "okay"; + + qca700x_cp: ethernet@0 { + reg = <0x0>; + compatible = "qca,qca7000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qca700x_cp_int + &pinctrl_qca700x_cp_rst + &pinctrl_qca700x_cp_btld>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_EDGE_RISING>; + spi-cpha; + spi-cpol; + spi-max-frequency = <16000000>; + }; +}; + +&fec1 { + status = "okay"; +}; + +&pwm7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_fan>; + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts index 427f8d04ec89..92cb45dacda6 100644 --- a/arch/arm/boot/dts/imx7d-remarkable2.dts +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "imx7d.dtsi" +#include <dt-bindings/input/linux-event-codes.h> / { model = "reMarkable 2.0"; @@ -69,6 +70,17 @@ startup-delay-us = <100000>; /* 100 ms */ }; + reg_touch: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_TOUCH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_reg>; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -79,6 +91,10 @@ }; }; +&cpu0 { + cpu-supply = <&buck1>; +}; + &clks { assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, <&clks IMX7D_CLKO2_ROOT_DIV>; @@ -106,6 +122,193 @@ }; }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + bd71815: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bd71815>; + interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */ + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + clocks = <&clks IMX7D_CLKO2_ROOT_SRC>; + clock-output-names = "bd71815-32k-out"; + #clock-cells = <0>; + #gpio-cells = <2>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-boot-on; + regulator-always-on; + }; + + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-boot-on; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@24 { + compatible = "cypress,tt21000"; + reg = <0x24>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + vdd-supply = <®_touch>; + touchscreen-size-x = <880>; + touchscreen-size-y = <1280>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + reg = <0>; + linux,keycodes = <KEY_HOMEPAGE>; + }; + + button@1 { + reg = <1>; + linux,keycodes = <KEY_MENU>; + }; + + button@2 { + reg = <2>; + linux,keycodes = <KEY_BACK>; + }; + + button@3 { + reg = <3>; + linux,keycodes = <KEY_SEARCH>; + }; + + button@4 { + reg = <4>; + linux,keycodes = <KEY_VOLUMEDOWN>; + }; + + button@5 { + reg = <5>; + linux,keycodes = <KEY_VOLUMEUP>; + }; + + button@6 { + reg = <6>; + linux,keycodes = <KEY_CAMERA>; + }; + + button@7 { + reg = <7>; + linux,keycodes = <KEY_POWER>; + }; + }; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default", "sleep"; @@ -216,6 +419,12 @@ }; &iomuxc { + pinctrl_bd71815: bd71815grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x59 + >; + }; + pinctrl_brcm_reg: brcmreggrp { fsl,pins = < /* WIFI_PWR_EN */ @@ -230,6 +439,15 @@ >; }; + pinctrl_touch: touchgrp { + fsl,pins = < + /* CYTTSP interrupt */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54 + /* CYTTSP reset */ + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f @@ -237,6 +455,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f @@ -244,6 +476,13 @@ >; }; + pinctrl_touch_reg: touchreggrp { + fsl,pins = < + /* TOUCH_PWR_EN */ + MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 7ceb7c09f7ad..4b94b8afb55d 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -165,6 +165,15 @@ reg = <0x306d0000 0x10000>; status = "disabled"; }; + + pxp: pxp@30700000 { + compatible = "fsl,imx7d-pxp"; + reg = <0x30700000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PXP_CLK>; + clock-names = "axi"; + }; }; &aips3 { diff --git a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts index bd4230d7dac9..765ab36e6f0c 100644 --- a/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +++ b/arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts @@ -56,7 +56,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Coyote PCI boardfile. @@ -80,7 +80,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -102,7 +102,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts index 92b987bc3f99..6f5b4e4eb1cc 100644 --- a/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +++ b/arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts @@ -112,7 +112,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Vulcan PCI boardfile. @@ -137,7 +137,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -159,7 +159,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts index 5ab09fb10dae..b9d46eb06507 100644 --- a/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +++ b/arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts @@ -122,7 +122,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from DSM-G600 PCI boardfile (dsmg600-pci.c) diff --git a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts index b740403b05a9..5a5e16cc7335 100644 --- a/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +++ b/arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts @@ -159,7 +159,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Written based on the FSG-3 PCI boardfile. @@ -187,7 +187,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -209,7 +209,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts index b7cbc90e1c18..4d70f6afd13a 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts @@ -53,7 +53,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Gateway 7001 PCI boardfile (gateway7001-pci.c) @@ -74,7 +74,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -91,7 +91,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts index a5943f51e8c2..97e3f25bb210 100644 --- a/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +++ b/arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts @@ -108,7 +108,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from Avila PCI boardfile. @@ -142,7 +142,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -164,7 +164,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts index f80388b17a9e..9ec0169bacf8 100644 --- a/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts +++ b/arch/arm/boot/dts/intel-ixp42x-goramo-multilink.dts @@ -82,7 +82,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * The device has 4 slots (IDSEL) with one dedicated IRQ per slot. @@ -148,7 +148,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 32>; phy-mode = "rgmii"; @@ -170,7 +170,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 33>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts index cbc87b344f6a..8da6823e1dbe 100644 --- a/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +++ b/arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts @@ -109,7 +109,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NAS 100D PCI boardfile (nas100d-pci.c) @@ -129,7 +129,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts index beaadda4685f..194945748dc3 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdp425.dts @@ -40,7 +40,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -62,7 +62,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts index f17cab12a64b..7011fea6205b 100644 --- a/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +++ b/arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts @@ -61,7 +61,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDPG425 PCI boardfile. @@ -95,7 +95,7 @@ /* EthB */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -117,7 +117,7 @@ /* EthC */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index 0edc5928e00b..da1e93212b86 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -116,7 +116,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant @@ -143,7 +143,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts index 5e7e31b74b04..4aba9e0214a0 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts @@ -117,7 +117,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * We have up to 2 slots (IDSEL) with 2 swizzled IRQs. @@ -141,7 +141,7 @@ * Do we need a new binding and property for this? */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; @@ -165,7 +165,7 @@ /* EthC - connected to KS8995 switch port 5 */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts index df2ca6d95ee5..19d56e9aec9d 100644 --- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts +++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts @@ -54,7 +54,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from WG302 v2 PCI boardfile (wg302v2-pci.c) @@ -77,7 +77,7 @@ }; ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts index b444003c10e1..c550c421b659 100644 --- a/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts +++ b/arch/arm/boot/dts/intel-ixp42x-welltech-epbx100.dts @@ -79,7 +79,7 @@ /* LAN port */ ethernet@c8009000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts index cf4010d60187..1db849515f9e 100644 --- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -121,7 +121,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * In the boardfile for the Cambria from OpenWRT the interrupts @@ -167,7 +167,7 @@ }; ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -188,7 +188,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts index 3d7cfa1a5ed4..4703a8b24765 100644 --- a/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts +++ b/arch/arm/boot/dts/intel-ixp43x-kixrp435.dts @@ -36,7 +36,7 @@ /* CHECKME: ethernet set-up taken from Gateworks Cambria */ ethernet@c800a000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; phy-mode = "rgmii"; @@ -57,7 +57,7 @@ }; ethernet@c800c000 { - status = "ok"; + status = "okay"; queue-rx = <&qmgr 2>; queue-txready = <&qmgr 19>; phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi index 146352ba848b..31c0a69771c4 100644 --- a/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi @@ -99,7 +99,7 @@ }; pci@c0000000 { - status = "ok"; + status = "okay"; /* * Taken from IXDP425 PCI boardfile. diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts index 5d6d074011df..abd5aef8b87d 100644 --- a/arch/arm/boot/dts/keystone-k2e-evm.dts +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts @@ -159,7 +159,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 88be868cf71e..3a87b7943c70 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -534,7 +534,7 @@ &dss { pinctrl-names = "default"; pinctrl-0 = <&vout_pins>; - status = "ok"; + status = "okay"; port { dpi_out: endpoint { diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts index 4352397b4f52..1f762af6f502 100644 --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts @@ -183,7 +183,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts index 1c880cf8fa91..3a69f65de81e 100644 --- a/arch/arm/boot/dts/keystone-k2l-evm.dts +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts @@ -132,7 +132,7 @@ }; &mdio { - status = "ok"; + status = "okay"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index f9f4b0143ba8..0c0851cd9bec 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -232,7 +232,7 @@ port@6 { reg = <6>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -251,6 +251,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts index 60c1e94f5dd3..9fd3581bb24b 100644 --- a/arch/arm/boot/dts/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -254,7 +254,6 @@ port@6 { reg = <6>; - label = "cpu"; phy-mode = "rgmii-id"; ethernet = <ð1port>; fixed-link { @@ -330,6 +329,7 @@ ethernet1-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts index 2f9660f3b457..27fd6e2337d5 100644 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts @@ -198,7 +198,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -221,6 +221,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index ced576acfb95..5a77286136c7 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -149,7 +149,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; @@ -166,6 +166,7 @@ ethernet0-port@0 { speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index e21aa674945d..9d62f910cddf 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -105,7 +105,7 @@ port@5 { reg = <5>; - label = "cpu"; + phy-mode = "rgmii-id"; ethernet = <ð0port>; fixed-link { speed = <1000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 21eb59041a7d..4f22ab451aae 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -506,6 +506,15 @@ }; }; + sdxc_a_pins: sdxc-a { + mux { + groups = "sdxc_d0_a", "sdxc_d13_a", + "sdxc_clk_a", "sdxc_cmd_a"; + function = "sdxc_a"; + bias-pull-up; + }; + }; + sdxc_b_pins: sdxc-b { mux { groups = "sdxc_d0_b", "sdxc_d13_b", @@ -568,6 +577,14 @@ bias-disable; }; }; + + xtal_32k_out_pins: xtal-32k-out { + mux { + groups = "xtal_32k_out"; + function = "xtal"; + bias-disable; + }; + }; }; }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d5a3fe21e8e7..5979209fe91e 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -580,8 +580,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson8b-gpio-intc"; + compatible = "amlogic,meson8b-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index fa6d55f1cfb9..aa4d4bf70629 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -19,7 +19,6 @@ ethernet0 = ðmac; i2c0 = &i2c_AO; serial0 = &uart_AO; - serial1 = &uart_A; mmc0 = &sd_card_slot; }; @@ -45,12 +44,32 @@ }; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + + pinctrl-0 = <&xtal_32k_out_pins>; + pinctrl-names = "default"; + + reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>, + <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>; + + clocks = <&xtal_32k_out>; + clock-names = "ext_clock"; + }; + vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + xtal_32k_out: xtal-32k-out-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k_out"; + }; }; &cpu0 { @@ -192,6 +211,27 @@ vref-supply = <&vddio_ao1v8>; }; +/* SDIO wifi */ +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_a_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + max-frequency = <50000000>; + + disable-wp; + non-removable; + cap-mmc-highspeed; + cap-sd-highspeed; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; +}; + &sdio { status = "okay"; @@ -222,6 +262,12 @@ pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; pinctrl-names = "default"; uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm20702a1"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + }; }; &uart_AO { diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 0a0fe8c5a405..ce6a4015fed5 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -359,7 +359,7 @@ mediatek,apmixedsys = <&apmixedsys>; }; - nandc: nfi@1100d000 { + nandc: nand-controller@1100d000 { compatible = "mediatek,mt2701-nfc"; reg = <0 0x1100d000 0 0x1000>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts index 5008115d2494..ece61a6a7a89 100644 --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts @@ -322,6 +322,12 @@ vqmmc-supply = <®_3p3v>; }; +&mt6323keys { + home { + status = "disabled"; + }; +}; + &mt6323_leds { status = "okay"; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index 1e96c865d41d..8adc0ef01f6c 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -14,7 +14,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - uart@3,0 { + serial@3,0 { compatible = "ns16550a"; reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ bank-width = <2>; @@ -50,7 +50,7 @@ gpmc,wr-data-mux-bus-ns = <45>; gpmc,wr-access-ns = <145>; }; - uart@3,1 { + serial@3,1 { compatible = "ns16550a"; reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */ bank-width = <2>; @@ -61,7 +61,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,2 { + serial@3,2 { compatible = "ns16550a"; reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */ bank-width = <2>; @@ -72,7 +72,7 @@ clock-frequency = <1843200>; current-speed = <115200>; }; - uart@3,3 { + serial@3,3 { compatible = "ns16550a"; reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */ bank-width = <2>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 35eced6521ef..1a085bc01317 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -8,7 +8,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts index 48e48b0c8190..e1b1a047f77a 100644 --- a/arch/arm/boot/dts/omap3-cm-t3730.dts +++ b/arch/arm/boot/dts/omap3-cm-t3730.dts @@ -9,7 +9,7 @@ / { model = "CompuLab CM-T3730"; - compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; wl12xx_vmmc2: wl12xx_vmmc2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 87e0ab1bbe95..4183fde46059 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -11,8 +11,7 @@ / { model = "OMAP3 GTA04"; - compatible = "ti,omap3-gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; - + compatible = "goldelico,gta04", "ti,omap3630", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { cpu0-supply = <&vcc>; @@ -612,6 +611,22 @@ clock-frequency = <100000>; }; +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 9dca5bfc87ab..eadb5b857f48 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020-rev-f", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index c6f863bc03ad..3f0197ceae09 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,7 +10,7 @@ / { model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0020", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index 8e9c12cf51a7..bc95a8df2e6a 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3"; /* Regulator to trigger the WL_EN signal of the Wifi module */ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen { diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 5188f96f431e..d36ceecb7328 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -10,7 +10,7 @@ / { model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)"; - compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "isee,omap3-igep0030", "ti,omap3630", "ti,omap3"; vmmcsdio_fixed: fixedregulator-mmcsdio { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index ecb4ef738e07..f6bbea2be54c 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -8,7 +8,7 @@ / { model = "INCOstartec LILLY-DBB056 (DM3730)"; - compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap3630", "ti,omap3"; }; &twl { diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts index d211bcc31174..a3cf3f443785 100644 --- a/arch/arm/boot/dts/omap3-n9.dts +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -12,7 +12,7 @@ / { model = "Nokia N9"; - compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n9", "ti,omap3630", "ti,omap3"; }; &i2c2 { diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index b2f480022ff6..cbaf79c4e842 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -12,7 +12,7 @@ / { model = "Nokia N950"; - compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "nokia,omap3-n950", "ti,omap3630", "ti,omap3"; keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts index 7f04dfad8203..3eb935df04dc 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-alto35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-alto35.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35"; - compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts index bc5a04e03336..3af8d10d7224 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43"; - compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts index 065c31cbf0e2..813e3c9fe3b6 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-gallop43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43"; - compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts index e38c1c51392c..8405bd9262de 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; - compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts index e6dc23159c4d..b9558d736e79 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-palo43.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-palo43.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43"; - compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-summit.dts b/arch/arm/boot/dts/omap3-overo-storm-summit.dts index 587c08ce282d..fcfc449f2abe 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-summit.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-summit.dts @@ -14,7 +14,7 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit"; - compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts index f57de6010994..6d14466c180a 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobi.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobi.dts @@ -14,6 +14,6 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi"; - compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts index 281af6c113be..bcf20ff3f281 100644 --- a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -14,5 +14,5 @@ / { model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; - compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3630", "ti,omap3"; }; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index ea509956d7ac..c0252f8a798a 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -16,7 +16,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap3630", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts index eb3893b9535e..4c36bde62491 100644 --- a/arch/arm/boot/dts/omap3-sbc-t3730.dts +++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts @@ -8,7 +8,7 @@ / { model = "CompuLab SBC-T3730 with CM-T3730"; - compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap3"; aliases { display0 = &dvi0; diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts index b6879cdc5c13..0591af494184 100644 --- a/arch/arm/boot/dts/omap3-sniper.dts +++ b/arch/arm/boot/dts/omap3-sniper.dts @@ -9,7 +9,7 @@ / { model = "LG Optimus Black"; - compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "lg,omap3-sniper", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index ce58b1f208e8..ab52e8d68f76 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -9,7 +9,7 @@ / { model = "TI Zoom3"; - compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap36xx", "ti,omap3"; + compatible = "ti,omap3-zoom3", "ti,omap3630", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts index 4f4888ec9138..fb203e7d37f5 100644 --- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts @@ -137,8 +137,12 @@ port@3 { reg = <3>; - label = "cpu"; ethernet = <ðport>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; }; port@5 { @@ -208,6 +212,7 @@ /* Hardwired to DSA switch */ speed = <1000>; duplex = <1>; + phy-mode = "rgmii"; }; }; diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts deleted file mode 100644 index c59e06ff2423..000000000000 --- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts +++ /dev/null @@ -1,115 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * wd-mbwe.dtsi - Device tree file for Western Digital My Book World Edition - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox810se.dtsi" - -/ { - model = "Western Digital My Book World Edition"; - - compatible = "wd,mbwe", "oxsemi,ox810se"; - - chosen { - bootargs = "console=ttyS1,115200n8 earlyprintk=serial"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x48000000 0x8000000>; - }; - - aliases { - serial1 = &uart1; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio0 0 1>; - linux,code = <0x198>; - }; - - recovery { - label = "recovery"; - gpios = <&gpio0 4 1>; - linux,code = <0xab>; - }; - }; - - leds { - compatible = "gpio-leds"; - - a0 { - label = "activity0"; - gpios = <&gpio0 25 0>; - default-state = "keep"; - }; - - a1 { - label = "activity1"; - gpios = <&gpio0 26 0>; - default-state = "keep"; - }; - - a2 { - label = "activity2"; - gpios = <&gpio0 5 0>; - default-state = "keep"; - }; - - a3 { - label = "activity3"; - gpios = <&gpio0 6 0>; - default-state = "keep"; - }; - - a4 { - label = "activity4"; - gpios = <&gpio0 7 0>; - default-state = "keep"; - }; - - a5 { - label = "activity5"; - gpios = <&gpio1 2 0>; - default-state = "keep"; - }; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - gpios = <&gpio0 3 0 /* sda */ - &gpio0 2 0 /* scl */ - >; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - rtc0: rtc@48 { - compatible = "st,m41t00"; - reg = <0x68>; - }; - }; -}; - -ða { - status = "okay"; -}; - -&uart1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi deleted file mode 100644 index 96c0745f7b70..000000000000 --- a/arch/arm/boot/dts/ox810se.dtsi +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox810se.dtsi - Device tree file for Oxford Semiconductor OX810SE SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/clock/oxsemi,ox810se.h> -#include <dt-bindings/reset/oxsemi,ox810se.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox810se"; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - device_type = "cpu"; - compatible = "arm,arm926ej-s"; - clocks = <&armclk>; - }; - }; - - memory { - device_type = "memory"; - /* Max 256MB @ 0x48000000 */ - reg = <0x48000000 0x10000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - rpsclk: rpsclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc>; - }; - - pll400: pll400 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <733333333>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&pll400>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll400>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&intc>; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox810se-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <8>; - interrupt-names = "macirq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk 6>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset 6>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0a { - pins = "gpio31"; - function = "fct3"; - }; - uart0b { - pins = "gpio32"; - function = "fct3"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0c { - pins = "gpio27"; - function = "fct3"; - }; - uart0d { - pins = "gpio28"; - function = "fct3"; - }; - uart0e { - pins = "gpio29"; - function = "fct3"; - }; - uart0f { - pins = "gpio30"; - function = "fct3"; - }; - uart0g { - pins = "gpio33"; - function = "fct3"; - }; - uart0h { - pins = "gpio34"; - function = "fct3"; - }; - }; - - pinctrl_uart1: uart1 { - uart1a { - pins = "gpio20"; - function = "fct3"; - }; - uart1b { - pins = "gpio22"; - function = "fct3"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1c { - pins = "gpio8"; - function = "fct3"; - }; - uart1d { - pins = "gpio9"; - function = "fct3"; - }; - uart1e { - pins = "gpio23"; - function = "fct3"; - }; - uart1f { - pins = "gpio24"; - function = "fct3"; - }; - uart1g { - pins = "gpio25"; - function = "fct3"; - }; - uart1h { - pins = "gpio26"; - function = "fct3"; - }; - }; - - pinctrl_uart2: uart2 { - uart2a { - pins = "gpio6"; - function = "fct3"; - }; - uart2b { - pins = "gpio7"; - function = "fct3"; - }; - }; - - pinctrl_uart2_modem: uart2_modem { - uart2c { - pins = "gpio0"; - function = "fct3"; - }; - uart2d { - pins = "gpio1"; - function = "fct3"; - }; - uart2e { - pins = "gpio2"; - function = "fct3"; - }; - uart2f { - pins = "gpio3"; - function = "fct3"; - }; - uart2g { - pins = "gpio4"; - function = "fct3"; - }; - uart2h { - pins = "gpio5"; - function = "fct3"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x000000 0x100000>; - interrupts = <21>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox810se-gpio"; - reg = <0x100000 0x100000>; - interrupts = <22>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <3>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 3>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - clocks = <&sysclk>; - interrupts = <23>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x300000 0x100000>; - clocks = <&sysclk>; - interrupts = <24>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART2>; - }; - - uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART3>; - }; - - uart3: serial@a00000 { - compatible = "ns16550a"; - reg = <0xa00000 0x100000>; - clocks = <&sysclk>; - interrupts = <30>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - resets = <&reset RESET_UART4>; - }; - }; - - apb-bridge@45000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x45000000 0x1000000>; - - sys: sys-ctrl@0 { - compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; - reg = <0x000000 0x100000>; - - reset: reset-controller { - compatible = "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - - rps@300000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x300000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox810se-rps-timer"; - reg = <0x200 0x40>; - clocks = <&rpsclk>; - interrupts = <4 5>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts deleted file mode 100644 index c3daceccde55..000000000000 --- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts +++ /dev/null @@ -1,93 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -/dts-v1/; -#include "ox820.dtsi" - -/ { - model = "Cloud Engines PogoPlug Series 3"; - - compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - }; - - leds { - compatible = "gpio-leds"; - - blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 0>; - default-state = "keep"; - }; - - orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 1>; - default-state = "keep"; - }; - - green { - label = "pogoplug:green"; - gpios = <&gpio1 17 1>; - default-state = "keep"; - }; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x00000000 0x00e00000>; - read-only; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi deleted file mode 100644 index dde4364892bf..000000000000 --- a/arch/arm/boot/dts/ox820.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC - * - * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/clock/oxsemi,ox820.h> -#include <dt-bindings/reset/oxsemi,ox820.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "oxsemi,ox820"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "oxsemi,ox820-smp"; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,arm11mpcore"; - clocks = <&armclk>; - reg = <1>; - }; - }; - - memory { - device_type = "memory"; - /* Max 512MB @ 0x60000000 */ - reg = <0x60000000 0x20000000>; - }; - - clocks { - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&osc>; - }; - - plla: plla { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <850000000>; - }; - - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&plla>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - interrupt-parent = <&gic>; - - nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk CLK_820_NAND>; - resets = <&reset RESET_NAND>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - etha: ethernet@40400000 { - compatible = "oxsemi,ox820-dwmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - - clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - resets = <&reset RESET_MAC>; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - status = "disabled"; - }; - - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x44000000 0x1000000>; - - pinctrl: pinctrl { - compatible = "oxsemi,ox820-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart0: uart0 { - uart0 { - pins = "gpio30", "gpio31"; - function = "fct5"; - }; - }; - - pinctrl_uart0_modem: uart0_modem { - uart0_modem_a { - pins = "gpio24", "gpio24", "gpio26", "gpio27"; - function = "fct4"; - }; - uart0_modem_b { - pins = "gpio28", "gpio29"; - function = "fct5"; - }; - }; - - pinctrl_uart1: uart1 { - uart1 { - pins = "gpio7", "gpio8"; - function = "fct4"; - }; - }; - - pinctrl_uart1_modem: uart1_modem { - uart1_modem { - pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43"; - function = "fct4"; - }; - }; - - pinctrl_etha_mdio: etha_mdio { - etha_mdio { - pins = "gpio3", "gpio4"; - function = "fct1"; - }; - }; - - pinctrl_nand: nand { - nand { - pins = "gpio12", "gpio13", "gpio14", "gpio15", - "gpio16", "gpio17", "gpio18", "gpio19", - "gpio20", "gpio21", "gpio22", "gpio23", - "gpio24"; - function = "fct1"; - }; - }; - }; - - gpio0: gpio@0 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x000000 0x100000>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <32>; - oxsemi,gpio-bank = <0>; - gpio-ranges = <&pinctrl 0 0 32>; - }; - - gpio1: gpio@100000 { - compatible = "oxsemi,ox820-gpio"; - reg = <0x100000 0x100000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - ngpios = <18>; - oxsemi,gpio-bank = <1>; - gpio-ranges = <&pinctrl 0 32 18>; - }; - - uart0: serial@200000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART1>; - }; - - uart1: serial@300000 { - compatible = "ns16550a"; - reg = <0x200000 0x100000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - status = "disabled"; - clocks = <&sysclk>; - resets = <&reset RESET_UART2>; - }; - - rps@400000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x400000 0x100000>; - - intc: interrupt-controller@0 { - compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq"; - interrupt-controller; - reg = <0 0x200>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - valid-mask = <0xffffffff>; - clear-mask = <0xffffffff>; - }; - - timer0: timer@200 { - compatible = "oxsemi,ox820-rps-timer"; - reg = <0x200 0x40>; - clocks = <&sysclk>; - interrupt-parent = <&intc>; - interrupts = <4>; - }; - }; - - sys: sys-ctrl@e00000 { - compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; - reg = <0xe00000 0x200000>; - - reset: reset-controller { - compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset"; - #reset-cells = <1>; - }; - - stdclk: stdclk { - compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; - }; - }; - - apb-bridge@47000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0 0x47000000 0x1000000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; - reg = <0x0 0x100>; - }; - - local-timer@600 { - compatible = "arm,arm11mp-twd-timer"; - reg = <0x600 0x20>; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&armclk>; - }; - - gic: interrupt-controller@1000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1000 0x1000>, - <0x100 0x500>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 92aa2b081901..672b246afbba 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -388,21 +388,37 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; acc2: clock-controller@20a8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu2_aux"; + #clock-cells = <0>; }; acc3: clock-controller@20b8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu3_aux"; + #clock-cells = <0>; }; saw0: power-controller@2089000 { @@ -879,8 +895,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-apq8064", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -1260,7 +1279,7 @@ gpu_opp_table: opp-table { compatible = "operating-points-v2"; - opp-320000000 { + opp-450000000 { opp-hz = /bits/ 64 <450000000>; }; @@ -1494,8 +1513,8 @@ num-lanes = <1>; #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>, /* I/O */ - <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00100000>, /* I/O */ + <0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* mem */ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fabd7455eb8f..b653ea40c441 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -654,25 +654,25 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi index a5a6f3ebb274..d90b4f4c63af 100644 --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -8,6 +8,14 @@ model = "ALFA Network AP120C-AC"; compatible = "alfa-network,ap120c-ac", "qcom,ipq4018"; + aliases { + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + keys { compatible = "gpio-keys"; @@ -68,7 +76,7 @@ }; }; - usb-power { + usb-power-hog { line-name = "USB-power"; gpios = <1 GPIO_ACTIVE_HIGH>; gpio-hog; @@ -162,6 +170,17 @@ label = "ART"; reg = <0x00170000 0x00010000>; read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; }; partition@180000 { @@ -178,7 +197,7 @@ }; }; - nand@1 { + flash@1 { compatible = "spi-nand"; reg = <1>; spi-max-frequency = <40000000>; @@ -225,10 +244,14 @@ &wifi0 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; }; &wifi1 { status = "okay"; + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 02e9ea78405d..dfcfb3339c23 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -143,7 +143,6 @@ sleep_clk: sleep_clk { compatible = "fixed-clock"; clock-frequency = <32000>; - clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; }; @@ -190,6 +189,8 @@ #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; + clocks = <&xo>, <&sleep_clk>; + clock-names = "xo", "sleep_clk"; }; prng: rng@22000 { @@ -325,22 +326,22 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { + acc0: power-manager@b088000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; }; - acc1: clock-controller@b098000 { + acc1: power-manager@b098000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; }; - acc2: clock-controller@b0a8000 { + acc2: power-manager@b0a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; }; - acc3: clock-controller@b0b8000 { + acc3: power-manager@b0b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; }; @@ -426,8 +427,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 52d77e105957..af6764770fd1 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -569,16 +569,20 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; clocks = <&gcc PLL8_VOTE>, <&pxo_board>; clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; + #clock-cells = <0>; }; acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { @@ -590,6 +594,10 @@ acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw1: regulator@2099000 { @@ -1081,8 +1089,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1132,8 +1140,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1183,8 +1191,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 8e9ea61a1e48..b40c52ddf9b4 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -116,7 +116,7 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon"; reg = <0x02011000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi index c373081bc21b..42acb9ddb8cc 100644 --- a/arch/arm/boot/dts/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include <dt-bindings/clock/qcom,mmcc-msm8974.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> @@ -377,6 +378,11 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>; + clock-names = "xo", + "sleep_clk"; }; mmcc: clock-controller@fd8c0000 { diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 86f76d0feff4..f601b40ebcf4 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -473,7 +473,7 @@ }; l2cc: clock-controller@2082000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon"; reg = <0x02082000 0x1000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index a0369b38fe07..2a668cd535cc 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -182,8 +182,11 @@ }; l2cc: clock-controller@2011000 { - compatible = "qcom,kpss-gcc", "syscon"; + compatible = "qcom,kpss-gcc-msm8960", "qcom,kpss-gcc", "syscon"; reg = <0x2011000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + #clock-cells = <0>; }; rpm: rpm@108000 { @@ -204,11 +207,19 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu0_aux"; + #clock-cells = <0>; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; }; saw0: regulator@2089000 { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 834ad95515b1..8208012684d4 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -418,22 +418,22 @@ regulator; }; - acc0: clock-controller@f9088000 { + acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; - acc1: clock-controller@f9098000 { + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; - acc2: clock-controller@f90a8000 { + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; - acc3: clock-controller@f90b8000 { + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; @@ -1057,7 +1057,7 @@ #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; - clocks = <&xo_board>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; clock-names = "xo", "sleep_clk"; diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts index d5343bb0daee..51058b065279 100644 --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts @@ -242,6 +242,23 @@ status = "okay"; }; +&pcie_phy { + vdda-phy-supply = <&vreg_l1e_bb_1p2>; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + + status = "okay"; +}; + +&pcie_rc { + perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -261,21 +278,48 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; +}; + +&tlmm { + pcie_default: pcie-default-state { + clkreq-pins { + pins = "gpio56"; + function = "pcie_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-pins { + pins = "gpio57"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wake-pins { + pins = "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts index ad74ecc2a196..8fadc6e70692 100644 --- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -242,19 +242,22 @@ status = "okay"; }; -&pcie0_phy { - status = "okay"; - +&pcie_phy { vdda-phy-supply = <&vreg_l1e_bb_1p2>; vdda-pll-supply = <&vreg_l4e_bb_0p875>; -}; -&pcie_ep { status = "okay"; +}; +&pcie_ep { pinctrl-names = "default"; pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default &pcie_ep_wake_default>; + + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + + status = "okay"; }; &qpic_bam { @@ -277,8 +280,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &tlmm { @@ -305,16 +308,18 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4e_bb_0p875>; vdda33-supply = <&vreg_l10e_3p1>; vdda18-supply = <&vreg_l5e_bb_1p7>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4e_bb_0p875>; vdda-pll-supply = <&vreg_l1e_bb_1p2>; + + status = "okay"; }; &usb { diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index df7303c5c843..342c3d14001e 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -304,7 +304,135 @@ status = "disabled"; }; - pcie0_phy: phy@1c07000 { + pcie_rc: pcie@1c00000 { + compatible = "qcom,pcie-sdx55"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40100000 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x40300000 0x0 0x3fd00000>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "msi8"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_PIPE_CLK>, + <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep"; + + assigned-clocks = <&gcc GCC_PCIE_AUX_CLK>; + assigned-clock-rates = <19200000>; + + iommu-map = <0x0 &apps_smmu 0x0200 0x1>, + <0x100 &apps_smmu 0x0201 0x1>, + <0x200 &apps_smmu 0x0202 0x1>, + <0x300 &apps_smmu 0x0203 0x1>, + <0x400 &apps_smmu 0x0204 0x1>; + + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_GDSC>; + + phys = <&pcie_lane>; + phy-names = "pciephy"; + + status = "disabled"; + }; + + pcie_ep: pcie-ep@1c00000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "sleep", + "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", + "doorbell"; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + + pcie_phy: phy@1c07000 { compatible = "qcom,sdx55-qmp-pcie-phy"; reg = <0x01c07000 0x1c4>; #address-cells = <1>; @@ -314,7 +442,10 @@ <&gcc GCC_PCIE_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, <&gcc GCC_PCIE_RCHNG_PHY_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen"; resets = <&gcc GCC_PCIE_PHY_BCR>; reset-names = "phy"; @@ -324,7 +455,7 @@ status = "disabled"; - pcie0_lane: lanes@1c06000 { + pcie_lane: lanes@1c06000 { reg = <0x01c06000 0x104>, /* tx0 */ <0x01c06200 0x328>, /* rx0 */ <0x01c07200 0x1e8>, /* pcs */ @@ -385,7 +516,7 @@ }; tcsr: syscon@1fcb000 { - compatible = "syscon"; + compatible = "qcom,sdx55-tcsr", "syscon"; reg = <0x01fc0000 0x1000>; }; @@ -401,45 +532,6 @@ status = "disabled"; }; - pcie_ep: pcie-ep@40000000 { - compatible = "qcom,sdx55-pcie-ep"; - reg = <0x01c00000 0x3000>, - <0x40000000 0xf1d>, - <0x40000f20 0xc8>, - <0x40001000 0x1000>, - <0x40200000 0x100000>, - <0x01c03000 0x3000>; - reg-names = "parf", "dbi", "elbi", "atu", "addr_space", - "mmio"; - - qcom,perst-regs = <&tcsr 0xb258 0xb270>; - - clocks = <&gcc GCC_PCIE_AUX_CLK>, - <&gcc GCC_PCIE_CFG_AHB_CLK>, - <&gcc GCC_PCIE_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_SLV_AXI_CLK>, - <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_SLEEP_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>; - clock-names = "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", "sleep", "ref"; - - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "global", "doorbell"; - reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; - resets = <&gcc GCC_PCIE_BCR>; - reset-names = "core"; - power-domains = <&gcc PCIE_GDSC>; - phys = <&pcie0_lane>; - phy-names = "pciephy"; - max-link-speed = <3>; - num-lanes = <2>; - - status = "disabled"; - }; - remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index ed98c83c141f..57bc3b03d3aa 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -245,6 +245,11 @@ status = "okay"; }; +&ipa { + qcom,gsi-loader = "skip"; + status = "okay"; +}; + &qpic_bam { status = "okay"; }; @@ -265,8 +270,8 @@ }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + status = "okay"; }; &usb { @@ -278,14 +283,14 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4b_0p88>; vdda33-supply = <&vreg_l10b_3p08>; vdda18-supply = <&vreg_l5b_1p8>; + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4b_0p88>; vdda-pll-supply = <&vreg_l1b_1p2>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi index 192f9f94bc8b..525dd8a1f664 100644 --- a/arch/arm/boot/dts/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/interconnect/qcom,sdx65.h> / { #address-cells = <1>; @@ -223,16 +224,15 @@ "qcom,usb-snps-hs-7nm-phy"; reg = <0xff4000 0x120>; #phy-cells = <0>; - status = "disabled"; clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "ref"; resets = <&gcc GCC_QUSB2PHY_BCR>; + status = "disabled"; }; usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; reg = <0x00ff6000 0x1c8>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -246,6 +246,8 @@ <&gcc GCC_USB3_PHY_BCR>; reset-names = "phy", "common"; + status = "disabled"; + usb_ssphy: phy@ff6200 { reg = <0x00ff6e00 0x160>, <0x00ff7000 0x1ec>, @@ -299,6 +301,44 @@ #hwlock-cells = <1>; }; + ipa: ipa@3f40000 { + compatible = "qcom,sdx65-ipa"; + + reg = <0x03f40000 0x10000>, + <0x03f50000 0x5000>, + <0x03e04000 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI1>, + <&mem_noc MASTER_APPSS_PROC &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; @@ -355,7 +395,6 @@ usb: usb@a6f8800 { compatible = "qcom,sdx65-dwc3", "qcom,dwc3"; reg = <0x0a6f8800 0x400>; - status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -385,6 +424,8 @@ resets = <&gcc GCC_USB30_BCR>; + status = "disabled"; + usb_dwc3: usb@a600000 { compatible = "snps,dwc3"; reg = <0x0a600000 0xcd00>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 0af63ddc4473..fa09295052c6 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -196,6 +196,19 @@ &i2c0 { status = "okay"; + + wm8978: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; + + eeprom@50 { + compatible = "st,24c01", "atmel,24c01"; + reg = <0x50>; + pagesize = <16>; + }; + touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; @@ -205,12 +218,6 @@ pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; - - wm8978: codec@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8978"; - reg = <0x1a>; - }; }; &i2c2 { diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 5f05f2b44a48..fd40890bd77b 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r8a7779.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -66,6 +67,51 @@ vdd33a-supply = <&fixedregulator3v3>; }; + keyboard-irq { + compatible = "gpio-keys"; + + pinctrl-0 = <&keyboard_irq_pins>; + pinctrl-names = "default"; + + interrupt-parent = <&gpio0>; + + key-1 { + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_1>; + label = "SW1-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + linux,code = <KEY_2>; + label = "SW1-2"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + keyboard-gpio { + compatible = "gpio-keys-polled"; + poll-interval = <50>; + + pinctrl-0 = <&keyboard_gpio_pins>; + pinctrl-names = "default"; + + key-3 { + gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW1-3"; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW1-4"; + debounce-interval = <20>; + }; + }; + leds { compatible = "gpio-leds"; led2 { @@ -161,6 +207,20 @@ }; }; +&gpio0 { + keyboard-irq-hog { + gpio-hog; + gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>; + input; + }; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <100000>; +}; + &irqpin0 { status = "okay"; }; @@ -223,6 +283,15 @@ groups = "hspi0"; function = "hspi0"; }; + + keyboard_irq_pins: keyboard-irq { + pins = "GP_0_17", "GP_0_18"; + bias-pull-up; + }; + keyboard_gpio_pins: keyboard-gpio { + pins = "GP_0_19", "GP_0_20"; + bias-pull-up; + }; }; &sata { diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 39fc58f32df6..97b767d81d92 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -324,6 +324,69 @@ status = "disabled"; }; + pwm0: pwm@ffe50000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe50000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@ffe51000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe51000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@ffe52000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe52000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@ffe53000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe53000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@ffe54000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe54000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@ffe55000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe55000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@ffe56000 { + compatible = "renesas,pwm-r8a7779", "renesas,pwm-rcar"; + reg = <0xffe56000 0x8>; + clocks = <&mstp0_clks R8A7779_CLK_PWM>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; + #pwm-cells = <2>; + status = "disabled"; + }; + pfc: pinctrl@fffc0000 { compatible = "renesas,pfc-r8a7779"; reg = <0xfffc0000 0x23c>; @@ -554,7 +617,8 @@ compatible = "renesas,r8a7779-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xffc80030 4>; - clocks = <&cpg_clocks R8A7779_CLK_S>, + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, <&cpg_clocks R8A7779_CLK_P>, @@ -572,20 +636,21 @@ <&cpg_clocks R8A7779_CLK_P>; #clock-cells = <1>; clock-indices = < - R8A7779_CLK_HSPI R8A7779_CLK_TMU2 - R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 - R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 - R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 - R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 - R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 - R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 - R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + R8A7779_CLK_PWM R8A7779_CLK_HSPI + R8A7779_CLK_TMU2 R8A7779_CLK_TMU1 + R8A7779_CLK_TMU0 R8A7779_CLK_HSCIF1 + R8A7779_CLK_HSCIF0 R8A7779_CLK_SCIF5 + R8A7779_CLK_SCIF4 R8A7779_CLK_SCIF3 + R8A7779_CLK_SCIF2 R8A7779_CLK_SCIF1 + R8A7779_CLK_SCIF0 R8A7779_CLK_I2C3 + R8A7779_CLK_I2C2 R8A7779_CLK_I2C1 + R8A7779_CLK_I2C0 >; clock-output-names = - "hspi", "tmu2", "tmu1", "tmu0", "hscif1", - "hscif0", "scif5", "scif4", "scif3", "scif2", - "scif1", "scif0", "i2c3", "i2c2", "i2c1", - "i2c0"; + "pwm", "hspi", "tmu2", "tmu1", "tmu0", + "hscif1", "hscif0", "scif5", "scif4", "scif3", + "scif2", "scif1", "scif0", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp1_clks: clocks@ffc80034 { compatible = "renesas,r8a7779-mstp-clocks", diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 2f2e483a2c2a..46fb81f5062f 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -376,6 +376,17 @@ reg = <0 0xe6060000 0 0x250>; }; + tpu: pwm@e60f0000 { + compatible = "renesas,tpu-r8a7790", "renesas,tpu"; + reg = <0 0xe60f0000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7790-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1037,6 +1048,76 @@ status = "disabled"; }; + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + status = "disabled"; + }; + can0: can@e6e80000 { compatible = "renesas,can-r8a7790", "renesas,rcar-gen2-can"; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index 27fb06ce907e..8b58773e592e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -5,6 +5,12 @@ * Copyright 2015 Google, Inc */ +/ { + aliases { + mmc1 = &sdmmc; + }; +}; + &io_domains { sdcard-supply = <&vccio_sd>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index e406c8c7c7e5..d838bf0d5d9a 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -10,6 +10,10 @@ #include "rk3288.dtsi" / { + aliases { + mmc0 = &emmc; + }; + chosen { stdout-path = "serial2:115200n8"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 511ca864c1b2..cb9cdaddffd4 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1114,7 +1114,7 @@ status = "disabled"; }; - mipi_dsi: mipi@ff960000 { + mipi_dsi: dsi@ff960000 { compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x4000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -1125,18 +1125,28 @@ status = "disabled"; ports { - mipi_in: port { + #address-cells = <1>; + #size-cells = <0>; + + mipi_in: port@0 { + reg = <0>; #address-cells = <1>; #size-cells = <0>; + mipi_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_mipi>; }; + mipi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_mipi>; }; }; + + mipi_out: port@1 { + reg = <1>; + }; }; }; @@ -1157,7 +1167,6 @@ lvds_in: port@0 { reg = <0>; - #address-cells = <1>; #size-cells = <0>; @@ -1165,11 +1174,16 @@ reg = <0>; remote-endpoint = <&vopb_out_lvds>; }; + lvds_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_lvds>; }; }; + + lvds_out: port@1 { + reg = <1>; + }; }; }; @@ -1190,19 +1204,26 @@ ports { #address-cells = <1>; #size-cells = <0>; + edp_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; + edp_in_vopb: endpoint@0 { reg = <0>; remote-endpoint = <&vopb_out_edp>; }; + edp_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_edp>; }; }; + + edp_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 12e90a1cc6a1..1a9e4a96b2ff 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -566,7 +566,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 8142c017882c..4d741adc16cd 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -210,8 +210,8 @@ * As we're dealing with 3wire SPI, we only define SCK * and MOSI (in the spec MOSI is called "SDA"). */ - gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; num-chipselects = <1>; diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi index b2dce3a29f39..27e0c3826789 100644 --- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi @@ -258,4 +258,133 @@ bias-disable; }; }; + + uart4_idle_pins_a: uart4-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_a: uart4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_idle_pins_a: uart8-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */ + bias-pull-up; + }; + }; + + uart8_sleep_pins_a: uart8-sleep-0 { + pins { + pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */ + <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */ + }; + }; + + usart1_pins_a: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */ + <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */ + bias-pull-up; + }; + }; + + usart1_idle_pins_a: usart1-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + usart1_sleep_pins_a: usart1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */ + <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */ + <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */ + }; + }; + + usart2_pins_a: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_idle_pins_a: usart2-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; }; diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi index 5949473cbbfd..d163c267e34c 100644 --- a/arch/arm/boot/dts/stm32mp131.dtsi +++ b/arch/arm/boot/dts/stm32mp131.dtsi @@ -397,12 +397,42 @@ status = "disabled"; }; + usart3: serial@4000f000 { + compatible = "st,stm32h7-uart"; + reg = <0x4000f000 0x400>; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART3_K>; + resets = <&rcc USART3_R>; + wakeup-source; + dmas = <&dmamux1 45 0x400 0x5>, + <&dmamux1 46 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; resets = <&rcc UART4_R>; + wakeup-source; + dmas = <&dmamux1 63 0x400 0x5>, + <&dmamux1 64 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@40011000 { + compatible = "st,stm32h7-uart"; + reg = <0x40011000 0x400>; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART5_K>; + resets = <&rcc UART5_R>; + wakeup-source; + dmas = <&dmamux1 65 0x400 0x5>, + <&dmamux1 66 0x400 0x1>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -442,6 +472,32 @@ status = "disabled"; }; + uart7: serial@40018000 { + compatible = "st,stm32h7-uart"; + reg = <0x40018000 0x400>; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART7_K>; + resets = <&rcc UART7_R>; + wakeup-source; + dmas = <&dmamux1 79 0x400 0x5>, + <&dmamux1 80 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart8: serial@40019000 { + compatible = "st,stm32h7-uart"; + reg = <0x40019000 0x400>; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc UART8_K>; + resets = <&rcc UART8_R>; + wakeup-source; + dmas = <&dmamux1 81 0x400 0x5>, + <&dmamux1 82 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timers1: timer@44000000 { #address-cells = <1>; #size-cells = <0>; @@ -524,6 +580,19 @@ }; }; + usart6: serial@44003000 { + compatible = "st,stm32h7-uart"; + reg = <0x44003000 0x400>; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART6_K>; + resets = <&rcc USART6_R>; + wakeup-source; + dmas = <&dmamux1 71 0x400 0x5>, + <&dmamux1 72 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s1: audio-controller@44004000 { compatible = "st,stm32h7-i2s"; reg = <0x44004000 0x400>; @@ -748,6 +817,32 @@ status = "disabled"; }; + usart1: serial@4c000000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c000000 0x400>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART1_K>; + resets = <&rcc USART1_R>; + wakeup-source; + dmas = <&dmamux1 41 0x400 0x5>, + <&dmamux1 42 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usart2: serial@4c001000 { + compatible = "st,stm32h7-uart"; + reg = <0x4c001000 0x400>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc USART2_K>; + resets = <&rcc USART2_R>; + wakeup-source; + dmas = <&dmamux1 43 0x400 0x5>, + <&dmamux1 44 0x400 0x1>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + i2s4: audio-controller@4c002000 { compatible = "st,stm32h7-i2s"; reg = <0x4c002000 0x400>; @@ -1137,6 +1232,54 @@ dma-requests = <48>; }; + fmc: memory-controller@58002000 { + compatible = "st,stm32mp1-fmc2-ebi"; + reg = <0x58002000 0x1000>; + ranges = <0 0 0x60000000 0x04000000>, /* EBI CS 1 */ + <1 0 0x64000000 0x04000000>, /* EBI CS 2 */ + <2 0 0x68000000 0x04000000>, /* EBI CS 3 */ + <3 0 0x6c000000 0x04000000>, /* EBI CS 4 */ + <4 0 0x80000000 0x10000000>; /* NAND */ + #address-cells = <2>; + #size-cells = <1>; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + status = "disabled"; + + nand-controller@4,0 { + compatible = "st,stm32mp1-fmc2-nfc"; + reg = <4 0x00000000 0x1000>, + <4 0x08010000 0x1000>, + <4 0x08020000 0x1000>, + <4 0x01000000 0x1000>, + <4 0x09010000 0x1000>, + <4 0x09020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 24 0x2 0x12000a02 0x0 0x0>, + <&mdma 24 0x2 0x12000a08 0x0 0x0>, + <&mdma 25 0x2 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + status = "disabled"; + }; + }; + + qspi: spi@58003000 { + compatible = "st,stm32f469-qspi"; + reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; + reg-names = "qspi", "qspi_mm"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma 26 0x2 0x10100002 0x0 0x0>, + <&mdma 26 0x2 0x10100008 0x0 0x0>; + dma-names = "tx", "rx"; + clocks = <&rcc QSPI_K>; + resets = <&rcc QSPI_R>; + status = "disabled"; + }; + sdmmc1: mmc@58005000 { compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x20253180>; diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts index c40686cb2b9a..f0900ca672b5 100644 --- a/arch/arm/boot/dts/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/stm32mp135f-dk.dts @@ -19,6 +19,13 @@ aliases { serial0 = &uart4; + serial1 = &usart1; + serial2 = &uart8; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; memory@c0000000 { @@ -267,8 +274,41 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart8_pins_a>; + pinctrl-1 = <&uart8_sleep_pins_a>; + pinctrl-2 = <&uart8_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + +&usart1 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_a>; + pinctrl-1 = <&usart1_sleep_pins_a>; + pinctrl-2 = <&usart1_idle_pins_a>; + uart-has-rtscts; + status = "disabled"; +}; + +/* Bluetooth */ +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_a>; + pinctrl-1 = <&usart2_sleep_pins_a>; + pinctrl-2 = <&usart2_idle_pins_a>; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index a9d2bec99014..e86d989dd351 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1880,6 +1880,21 @@ }; }; + spi1_pins_b: spi1-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ + <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ + bias-disable; + }; + }; + spi2_pins_a: spi2-0 { pins1 { pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ @@ -2163,7 +2178,7 @@ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins2 { pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */ @@ -2181,7 +2196,7 @@ pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <0>; }; pins3 { pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ @@ -2448,19 +2463,4 @@ bias-disable; }; }; - - spi1_pins_b: spi1-1 { - pins1 { - pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */ - <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - - pins2 { - pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */ - bias-disable; - }; - }; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 4c8be9c8eb20..0da3667ab1e0 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -17,9 +17,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 2bc92ef3aeb9..ab13e340f4ef 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -18,9 +18,6 @@ aliases { ethernet0 = ðernet0; - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart7; serial3 = &usart2; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index b1eb688a278a..8beb901be506 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -16,6 +16,10 @@ model = "STMicroelectronics STM32MP157C eval daughter"; compatible = "st,stm32mp157c-ed1", "st,stm32mp157"; + aliases { + serial0 = &uart4; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -65,15 +69,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@e8000000 { - reg = <0xe8000000 0x8000000>; - no-map; - }; - }; - - aliases { - serial0 = &uart4; }; sd_switch: regulator-sd_switch { @@ -140,10 +135,6 @@ status = "okay"; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 7d11c50b9e40..b01470a9a3d5 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -68,11 +68,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@dc000000 { - reg = <0xdc000000 0x4000000>; - no-map; - }; }; led: gpio_leds { @@ -183,10 +178,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 542226cfcfdf..ba8e9d9a42fa 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -14,16 +14,15 @@ model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; - chosen { - stdout-path = "serial0:115200n8"; - }; - aliases { - serial0 = &uart4; serial1 = &usart3; ethernet0 = ðernet0; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + clocks { clk_ext_camera: clk-ext-camera { #clock-cells = <0>; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index cb00ce7cec8b..407ed3952f75 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -73,7 +73,7 @@ }; panel: panel { - compatible = "edt,etm0700g0edh6", "simple-panel"; + compatible = "edt,etm0700g0edh6"; backlight = <&backlight>; enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>; power-supply = <®_3v3>; diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi index 2d9461006810..e22871dc580c 100644 --- a/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi @@ -62,11 +62,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -80,11 +75,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 11370ae0d868..cefeeb00fc22 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -8,6 +8,12 @@ #include <dt-bindings/mfd/st,stpmic1.h> / { + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart7; + }; + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x20000000>; @@ -53,11 +59,6 @@ reg = <0x38000000 0x10000>; no-map; }; - - gpu_reserved: gpu@d4000000 { - reg = <0xd4000000 0x4000000>; - no-map; - }; }; led { @@ -151,10 +152,6 @@ }; }; -&gpu { - contiguous-area = <&gpu_reserved>; -}; - &hash1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi index 935b7084b5a2..a43965c86fe8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi @@ -210,8 +210,8 @@ &m4_rproc { memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, <&vdev0vring1>, <&vdev0buffer>; - mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; - mbox-names = "vq0", "vq1", "shutdown"; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; + mbox-names = "vq0", "vq1", "shutdown", "detach"; interrupt-parent = <&exti>; interrupts = <68 1>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 6cdadba6a3ac..5cce4918f84c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -822,7 +822,7 @@ clocks = <&ccu CLK_APB2_UART0>; resets = <&ccu RST_APB2_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -835,7 +835,7 @@ clocks = <&ccu CLK_APB2_UART1>; resets = <&ccu RST_APB2_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -848,7 +848,7 @@ clocks = <&ccu CLK_APB2_UART2>; resets = <&ccu RST_APB2_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -861,7 +861,7 @@ clocks = <&ccu CLK_APB2_UART3>; resets = <&ccu RST_APB2_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -874,7 +874,7 @@ clocks = <&ccu CLK_APB2_UART4>; resets = <&ccu RST_APB2_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -887,7 +887,7 @@ clocks = <&ccu CLK_APB2_UART5>; resets = <&ccu RST_APB2_UART5>; dmas = <&dma 22>, <&dma 22>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index f630ab55bb6a..4aa9d88c9ea3 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -490,7 +490,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -503,7 +503,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -516,7 +516,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -529,7 +529,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -542,7 +542,7 @@ clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts new file mode 100644 index 000000000000..94e24b5926dd --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s-mangopi-mq-r-t113.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#include <dt-bindings/interrupt-controller/irq.h> + +/dts-v1/; + +#include "sun8i-t113s.dtsi" +#include "sunxi-d1s-t113-mangopi-mq-r.dtsi" + +/ { + model = "MangoPi MQ-R-T113"; + compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s"; + + aliases { + ethernet0 = &rtl8189ftv; + }; +}; + +&cpu0 { + cpu-supply = <®_vcc_core>; +}; + +&cpu1 { + cpu-supply = <®_vcc_core>; +}; + +&mmc1 { + rtl8189ftv: wifi@1 { + reg = <1>; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */ + interrupt-names = "host-wake"; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-t113s.dtsi b/arch/arm/boot/dts/sun8i-t113s.dtsi new file mode 100644 index 000000000000..804aa197a24f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-t113s.dtsi @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. + +#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <riscv/allwinner/sunxi-d1s-t113.dtsi> +#include <riscv/allwinner/sunxi-d1-t113.dtsi> + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clocks = <&ccu CLK_CPUX>; + clock-names = "cpu"; + }; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index db194c606fdc..b001251644f7 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -479,7 +479,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -492,7 +492,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -505,7 +505,7 @@ reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; resets = <&ccu RST_BUS_UART2>; pinctrl-0 = <&uart2_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index 04e59b8381cb..43896723a994 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "suniv-f1c100s.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Lichee Pi Nano"; compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; @@ -50,8 +52,22 @@ }; }; +&otg_sram { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pe_pins>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 9455d27e516e..3c61d59ab5f8 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -133,6 +133,32 @@ #size-cells = <0>; }; + usb_otg: usb@1c13000 { + compatible = "allwinner,suniv-f1c100s-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <26>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; @@ -181,6 +207,12 @@ pins = "PE0", "PE1"; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA2", "PA3"; + function = "uart1"; + }; }; i2c0: i2c@1c27000 { diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts new file mode 100644 index 000000000000..2d2a3f026df3 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Arm Ltd, + * based on work: + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Lctech Pi F1C200s"; + compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s", + "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pa_pins>; + status = "okay"; +}; + +/* + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected + * to Vin, which supplies the board. Host mode works (if the board is powered + * otherwise), but peripheral is probably the intention. + */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts new file mode 100644 index 000000000000..184c245041a6 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-popstick-v1.1.dts @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Icenowy Zheng <uwu@icenowy.me> + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Popcorn Computer PopStick v1.1"; + compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick", + "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */ + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */ + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pe_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi new file mode 100644 index 000000000000..e9bc749488bb --- /dev/null +++ b/arch/arm/boot/dts/sunxi-d1s-t113-mangopi-mq-r.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// Copyright (C) 2022 Arm Ltd. +/* + * Common peripherals and configurations for MangoPi MQ-R boards. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + aliases { + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial3:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */ + }; + }; + + /* board wide 5V supply directly from the USB-C socket */ + reg_vcc5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* SY8008 DC/DC regulator on the board */ + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + }; + + /* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */ + reg_vcc_core: regulator-core { + compatible = "regulator-fixed"; + regulator-name = "vcc-core"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + vin-supply = <®_vcc5v>; + }; + + /* XC6206 LDO on the board */ + reg_avdd2v8: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_3v3>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */ + }; +}; + +&dcxo { + clock-frequency = <24000000>; +}; + +&ehci1 { + status = "okay"; +}; + +&mmc0 { + pinctrl-0 = <&mmc0_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + vmmc-supply = <®_3v3>; + non-removable; + bus-width = <4>; + mmc-pwrseq = <&wifi_pwrseq>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_3v3>; + vcc-pd-supply = <®_3v3>; + vcc-pe-supply = <®_avdd2v8>; + vcc-pf-supply = <®_3v3>; + vcc-pg-supply = <®_3v3>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pb_pins>; + status = "okay"; +}; + +/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 686193bd6bd9..ade1cd50e445 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -710,7 +710,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -723,7 +723,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -736,7 +736,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -749,7 +749,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts index 7b2969656ec9..c2a9c3fb5b33 100644 --- a/arch/arm/boot/dts/tegra20-asus-tf101.dts +++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts @@ -520,10 +520,10 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ - 0x00000400 /* Mic bias current detect */ + 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ >; @@ -577,9 +577,9 @@ vdd-supply = <&vdd_1v8_sys>; vddio-supply = <&vdd_1v8_sys>; - mount-matrix = "1", "0", "0", - "0", "1", "0", - "0", "0", "1"; + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "-1"; }; }; }; @@ -1184,15 +1184,16 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; + "IN2L", "Mic Jack", + "DMICDAT", "Int Mic"; nvidia,i2s-controller = <&tegra_i2s1>; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,headset; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-asus-tf201.dts b/arch/arm/boot/dts/tegra30-asus-tf201.dts index 3c2b9e93e028..0406c5a69c12 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf201.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf201.dts @@ -624,4 +624,21 @@ /delete-node/ opp-800000000-1300; /delete-node/ opp-900000000-1350; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf201", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Prime TF201 RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300t.dts b/arch/arm/boot/dts/tegra30-asus-tf300t.dts index 506ae3626731..970a1f08dc8c 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300t.dts @@ -128,8 +128,8 @@ micdet-delay = <100>; gpio-cfg = < - 0xffffffff /* don't touch */ - 0xffffffff /* don't touch */ + 0x00000600 /* DMIC_LR, output */ + 0x00000680 /* DMIC_DAT, input */ 0x00000000 /* Speaker-enable GPIO, output, low */ 0xffffffff /* don't touch */ 0xffffffff /* don't touch */ @@ -1023,12 +1023,10 @@ "Int Spk", "RON", "Int Spk", "LOP", "Int Spk", "LON", - "IN1L", "Mic Jack", "IN2L", "Mic Jack", "DMICDAT", "Int Mic"; nvidia,audio-codec = <&wm8903>; nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; - nvidia,headset; }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts index 573deeafb7ba..4861db8e1e59 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf300tg.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf300tg.dts @@ -1084,4 +1084,21 @@ /delete-node/ opp-800000000; /delete-node/ opp-900000000; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf300tg", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Pad TF300TG RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts index e7fe8c7a7435..efde7dad718a 100644 --- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts +++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts @@ -820,4 +820,21 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + sound { + compatible = "asus,tegra-audio-rt5631-tf700t", + "nvidia,tegra-audio-rt5631"; + nvidia,model = "Asus Transformer Infinity TF700T RT5631"; + + nvidia,audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR", + "Int Spk", "SPOL", + "Int Spk", "SPOR", + "MIC1", "MIC Bias1", + "MIC Bias1", "Mic Jack", + "DMIC", "Int Mic"; + + nvidia,audio-codec = <&rt5631>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi index 1861b2de2dc3..bdb898ad6262 100644 --- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi @@ -558,7 +558,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_cs1_n_pw2 { + hp_detect { nvidia,pins = "spi2_cs1_n_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -566,10 +566,10 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - spi2_sck_px2 { + mic_detect { nvidia,pins = "spi2_sck_px2"; nvidia,function = "spi2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; @@ -1674,7 +1674,8 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - nvidia,hp-mute-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_LOW>; + nvidia,coupled-mic-hp-det; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi index d100a1a8b705..a2d557155114 100644 --- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -210,6 +210,20 @@ opp-suspend; }; + opp-266500000-1000 { + opp-microvolt = <1000000 1000000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0007>; + required-opps = <&core_opp_1000>; + }; + + opp-266500000-1250 { + opp-microvolt = <1250000 1250000 1350000>; + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x0008>; + required-opps = <&core_opp_1250>; + }; + opp-333500000-1000 { opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <333500000>; @@ -424,6 +438,12 @@ opp-suspend; }; + opp-266500000 { + opp-hz = /bits/ 64 <266500000>; + opp-supported-hw = <0x000F>; + opp-peak-kBps = <2132000>; + }; + opp-333500000 { opp-hz = /bits/ 64 <333500000>; opp-supported-hw = <0x000F>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b6fcac6016e0..9cba67b54111 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1283,10 +1283,7 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&{/cpus/cpu@0}>, - <&{/cpus/cpu@1}>, - <&{/cpus/cpu@2}>, - <&{/cpus/cpu@3}>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; thermal-zones { diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index 2ccaa11aaa56..5dcc4ddd1a56 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -21,6 +21,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32mp131", "st,stm32mp133", "st,stm32mp135", + "st,stm32mp151", "st,stm32mp157", NULL }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index b5c1ff19b4c4..ce3ae19e72db 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index ccf1ba57fa87..cd1c5b04890a 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -8,7 +8,9 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb @@ -17,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index d2f7cb4e5375..eed96f262844 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -125,6 +125,16 @@ clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + + gpio_intc: interrupt-controller@0440 { + compatible = "amlogic,meson-a1-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x0440 0x0 0x14>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <49 50 51 52 53 54 55 56>; + }; }; gic: interrupt-controller@ff901000 { diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi index e1605a9b0a13..db605f3a22b4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi @@ -159,7 +159,6 @@ onewire { compatible = "w1-gpio"; gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts new file mode 100644 index 000000000000..ac6f7ae1d103 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-bananapi.dtsi" + +/ { + compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b"; + model = "BananaPi M2S"; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c3; + }; +}; + +/* Camera (CSI) bus */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; + pinctrl-names = "default"; +}; + +/* Display (DSI) bus */ +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&npu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts new file mode 100644 index 000000000000..1b0c3881c6a1 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> + */ + +/dts-v1/; + +#include "meson-g12b-bananapi-cm4.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; + model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module"; + + aliases { + ethernet0 = ðmac; + i2c0 = &i2c1; + i2c1 = &i2c3; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-CM4IO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&cecb_AO { + status = "okay"; +}; + +ðmac { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* CSI port */ +&i2c1 { + status = "okay"; +}; + +/* DSI port for touchscreen */ +&i2c3 { + status = "okay"; +}; + +/* miniPCIe port with USB + SIM slot */ +&pcie { + status = "okay"; +}; + +&sd_emmc_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +/* Peripheral Only USB-C port */ +&usb { + dr_mode = "peripheral"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi new file mode 100644 index 000000000000..97e522921b06 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org> + */ + +#include "meson-g12b-a311d.dtsi" +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + aliases { + serial0 = &uart_AO; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddio_c: regulator-vddio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>; + gpios-states = <1>; + + states = <1800000 0>, + <3300000 1>; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Ethernet to be enabled in baseboard DT */ +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +/* HDMI to be enabled in baseboard DT */ +&hdmi_tx { + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&dc_in>; +}; + +/* "Camera" I2C bus */ +&i2c1 { + pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; + pinctrl-names = "default"; +}; + +/* Main I2C bus */ +&i2c2 { + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; +}; + +/* "ID" I2C bus */ +&i2c3 { + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + + status = "okay"; +}; + +&saradc { + vref-supply = <&vddao_1v8>; + + status = "okay"; +}; + +/* on-module SDIO WiFi */ +&sd_emmc_a { + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + sd-uhs-sdr104; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; + + status = "okay"; + + rtl8822cs: wifi@1 { + reg = <1>; + }; +}; + +/* SD card to be enabled in baseboard DT */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_c>; +}; + +/* on-module eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +/* on-module UART BT */ +&uart_A { + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi new file mode 100644 index 000000000000..83709787eb91 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -0,0 +1,521 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */ + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "RST"; + linux,code = <KEY_POWER>; + press-threshold-microvolt = <10000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + cooling-min-state = <0>; + cooling-max-state = <3>; + cooling-levels = <0 120 170 220>; + pwms = <&pwm_cd 1 40000 0>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + pwm-supply = <&dc_in>; + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + compatible = "pwm-regulator"; + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + pwm-supply = <&vsys_3v3>; + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + regulator-boot-on; + regulator-always-on; + }; + + vsys_3v3: regulator-vsys-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb-pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-M2S"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* Main i2c bus */ +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; +}; + +&pcie { + status = "okay"; + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_d_x6_pins>; + pinctrl-names = "default"; + pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + /* enable if WiFi/BT board connected */ + status = "disabled"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + sd-uhs-sdr104; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vddao_1v8>; + + rtl8822cs: wifi@1 { + reg = <1>; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vsys_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + /* enable if WiFi/BT board connected */ + status = "disabled"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr>; +}; + +&usb3_pcie_phy { + phy-supply = <&usb_pwr>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts index c8e5a0a42b89..29d642e746d4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts @@ -620,7 +620,7 @@ }; &periphs_pinctrl { - keypad_gpio_pins: keypad-gpio { + keypad_gpio_pins: keypad-gpio-state { mux { groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3", "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7", diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts index 9a60c5ec2072..890f5bfebb03 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -360,7 +360,7 @@ pinctrl-0 = <&pwm_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; - clock-names = "clkin2"; + clock-names = "clkin0"; status = "okay"; }; @@ -368,7 +368,7 @@ pinctrl-0 = <&pwm_ao_a_pins>; pinctrl-names = "default"; clocks = <&xtal>; - clock-names = "clkin3"; + clock-names = "clkin0"; status = "okay"; }; @@ -376,7 +376,7 @@ pinctrl-0 = <&pwm_ao_d_e_pins>; pinctrl-names = "default"; clocks = <&xtal>; - clock-names = "clkin4"; + clock-names = "clkin1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts new file mode 100644 index 000000000000..7f66f263a2ce --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include "meson-g12b-bananapi.dtsi" + +/ { + compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b"; + model = "BananaPi M2S"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index 5f2d4317ecfb..e238f1f10124 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -6,21 +6,29 @@ /dts-v1/; #include "meson-gxbb-p20x.dtsi" - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-aiu.h> + / { compatible = "videostrong,kii-pro", "amlogic,meson-gxbb"; model = "Videostrong KII Pro"; + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + leds { compatible = "gpio-leds"; led { gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; - default-state = "off"; color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; + default-state = "off"; }; }; @@ -35,22 +43,58 @@ }; }; -}; + sound { + compatible = "amlogic,gx-sound-card"; + model = "KII-PRO"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + }; - bluetooth { - compatible = "brcm,bcm4335a0"; + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; }; }; - +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_y_pins>; + pinctrl-names = "default"; +}; ðmac { status = "okay"; @@ -78,3 +122,19 @@ &ir { linux,rc-map-name = "rc-videostrong-kii-pro"; }; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4335a0"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 923d2d8bbb9c..12ef6e81c8bd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -300,8 +300,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson-gxbb-gpio-intc"; + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts index 874f91c348ec..6c4e68e0e625 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts @@ -305,7 +305,6 @@ }; &usb2_phy0 { - pinctrl-names = "default"; phy-supply = <&vcc5v>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 5905a6df09b0..17bcfa4702e1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -312,8 +312,8 @@ }; &gpio_intc { - compatible = "amlogic,meson-gpio-intc", - "amlogic,meson-gxl-gpio-intc"; + compatible = "amlogic,meson-gxl-gpio-intc", + "amlogic,meson-gpio-intc"; status = "okay"; }; @@ -773,16 +773,23 @@ }; }; - eth-phy-mux@55c { - compatible = "mdio-mux-mmioreg", "mdio-mux"; + eth_phy_mux: mdio@558 { + reg = <0x0 0x558 0x0 0xc>; + compatible = "amlogic,gxl-mdio-mux"; #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0x55c 0x0 0x4>; - mux-mask = <0xffffffff>; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "ref"; mdio-parent-bus = <&mdio0>; - internal_mdio: mdio@e40908ff { - reg = <0xe40908ff>; + external_mdio: mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + internal_mdio: mdio@1 { + reg = <0x1>; #address-cells = <1>; #size-cells = <0>; @@ -793,12 +800,6 @@ max-speed = <100>; }; }; - - external_mdio: mdio@2009087f { - reg = <0x2009087f>; - #address-cells = <1>; - #size-cells = <0>; - }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts index 444c249863cb..4eda9f634c42 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts @@ -54,6 +54,10 @@ vbus-supply = <&typec2_vbus>; status = "okay"; + + connector { + compatible = "usb-c-connector"; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index ad50cba42d19..f24460186d3d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -85,7 +85,7 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; - apb4: apb4@fe000000 { + apb4: bus@fe000000 { compatible = "simple-bus"; reg = <0x0 0xfe000000 0x0 0x480000>; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi index bb492581f1b7..17045ff81c69 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi @@ -105,7 +105,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; + enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; @@ -316,7 +316,7 @@ * be handled by a USB specific power sequence to reset the Hub * when the USB bus is powered down. */ - usb-hub { + usb-hub-hog { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index ddb1b345397f..2fce44939f45 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -48,7 +48,7 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v>; - enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; + enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile index 5a7506ff5ea3..aec5e29cdfb7 100644 --- a/arch/arm64/boot/dts/apple/Makefile +++ b/arch/arm64/boot/dts/apple/Makefile @@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb +dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi index 1c41954e3899..b1c875e692c8 100644 --- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi @@ -71,6 +71,15 @@ power-domains = <&ps_sio_cpu>; }; + fpwm0: pwm@39b030000 { + compatible = "apple,t6000-fpwm", "apple,s5l-fpwm"; + reg = <0x3 0x9b030000 0x0 0x4000>; + power-domains = <&ps_fpwm0>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + i2c0: i2c@39b040000 { compatible = "apple,t6000-i2c", "apple,i2c"; reg = <0x3 0x9b040000 0x0 0x4000>; @@ -233,6 +242,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp_sys>; + status = "disabled"; }; pcie0_dart_3: iommu@584008000 { @@ -242,6 +252,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp_sys>; + status = "disabled"; }; pcie0: pcie@590000000 { @@ -338,6 +349,7 @@ <0 0 0 2 &port02 0 0 0 1>, <0 0 0 3 &port02 0 0 0 2>, <0 0 0 4 &port02 0 0 0 3>; + status = "disabled"; }; port03: pci@3,0 { @@ -357,5 +369,6 @@ <0 0 0 2 &port03 0 0 0 1>, <0 0 0 3 &port03 0 0 0 2>, <0 0 0 4 &port03 0 0 0 3>; + status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi index 34906d522f0a..2e471dfe43cf 100644 --- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi @@ -9,6 +9,8 @@ * Copyright The Asahi Linux Contributors */ +#include <dt-bindings/leds/common.h> + / { aliases { serial0 = &serial0; @@ -34,6 +36,18 @@ device_type = "memory"; reg = <0x100 0 0x2 0>; /* To be filled by loader */ }; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm0 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; }; &serial0 { @@ -102,13 +116,6 @@ }; }; -&pcie0_dart_2 { - status = "disabled"; -}; - -&pcie0_dart_3 { - status = "disabled"; +&fpwm0 { + status = "okay"; }; - -/delete-node/ &port02; -/delete-node/ &port03; diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi index 00d3a9447c89..1e5a19e49b08 100644 --- a/arch/arm64/boot/dts/apple/t600x-j375.dtsi +++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi @@ -104,6 +104,7 @@ &port02 { /* 10 Gbit Ethernet */ bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ @@ -114,4 +115,14 @@ &port03 { /* USB xHCI */ bus-range = <4 4>; + status = "okay"; +}; + + +&pcie0_dart_2 { + status = "okay"; +}; + +&pcie0_dart_3 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts index b52ddc409893..1c3e37f86d46 100644 --- a/arch/arm64/boot/dts/apple/t8103-j274.dts +++ b/arch/arm64/boot/dts/apple/t8103-j274.dts @@ -37,10 +37,12 @@ &port01 { bus-range = <2 2>; + status = "okay"; }; &port02 { bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ @@ -48,6 +50,14 @@ }; }; +&pcie0_dart_1 { + status = "okay"; +}; + +&pcie0_dart_2 { + status = "okay"; +}; + &i2c2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts index 151074109a11..56b0c67bfcda 100644 --- a/arch/arm64/boot/dts/apple/t8103-j293.dts +++ b/arch/arm64/boot/dts/apple/t8103-j293.dts @@ -11,10 +11,23 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j293", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Pro (13-inch, M1, 2020)"; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; }; &bluetooth0 { @@ -25,21 +38,6 @@ brcm,board-type = "apple,honshu"; }; -/* - * Remove unused PCIe ports and disable the associated DARTs. - */ - -&pcie0_dart_1 { - status = "disabled"; -}; - -&pcie0_dart_2 { - status = "disabled"; -}; - -/delete-node/ &port01; -/delete-node/ &port02; - &i2c2 { status = "okay"; }; @@ -47,3 +45,7 @@ &i2c4 { status = "okay"; }; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts index bc1f865aa790..97a4344d8dca 100644 --- a/arch/arm64/boot/dts/apple/t8103-j313.dts +++ b/arch/arm64/boot/dts/apple/t8103-j313.dts @@ -11,10 +11,23 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j313", "apple,t8103", "apple,arm-platform"; model = "Apple MacBook Air (M1, 2020)"; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; }; &bluetooth0 { @@ -25,17 +38,6 @@ brcm,board-type = "apple,shikoku"; }; -/* - * Remove unused PCIe ports and disable the associated DARTs. - */ - -&pcie0_dart_1 { - status = "disabled"; +&fpwm1 { + status = "okay"; }; - -&pcie0_dart_2 { - status = "disabled"; -}; - -/delete-node/ &port01; -/delete-node/ &port02; diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts index 2db425ceb30f..58c8e43789b4 100644 --- a/arch/arm64/boot/dts/apple/t8103-j456.dts +++ b/arch/arm64/boot/dts/apple/t8103-j456.dts @@ -55,13 +55,23 @@ &port01 { bus-range = <2 2>; + status = "okay"; }; &port02 { bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ local-mac-address = [00 10 18 00 00 00]; }; }; + +&pcie0_dart_1 { + status = "okay"; +}; + +&pcie0_dart_2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts index 3821ff146c56..152f95fd49a2 100644 --- a/arch/arm64/boot/dts/apple/t8103-j457.dts +++ b/arch/arm64/boot/dts/apple/t8103-j457.dts @@ -37,6 +37,7 @@ &port02 { bus-range = <3 3>; + status = "okay"; ethernet0: ethernet@0,0 { reg = <0x30000 0x0 0x0 0x0 0x0>; /* To be filled by the loader */ @@ -44,12 +45,6 @@ }; }; -/* - * Remove unused PCIe port and disable the associated DART. - */ - -&pcie0_dart_1 { - status = "disabled"; +&pcie0_dart_2 { + status = "okay"; }; - -/delete-node/ &port01; diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi index 9859219699f4..9b0dad6b6184 100644 --- a/arch/arm64/boot/dts/apple/t8103.dtsi +++ b/arch/arm64/boot/dts/apple/t8103.dtsi @@ -432,6 +432,15 @@ status = "disabled"; /* only used in J293 */ }; + fpwm1: pwm@235044000 { + compatible = "apple,t8103-fpwm", "apple,s5l-fpwm"; + reg = <0x2 0x35044000 0x0 0x4000>; + power-domains = <&ps_fpwm1>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>; @@ -724,6 +733,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp>; + status = "disabled"; }; pcie0_dart_2: iommu@683008000 { @@ -733,6 +743,7 @@ interrupt-parent = <&aic>; interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&ps_apcie_gp>; + status = "disabled"; }; pcie0: pcie@690000000 { @@ -807,6 +818,7 @@ <0 0 0 2 &port01 0 0 0 1>, <0 0 0 3 &port01 0 0 0 2>, <0 0 0 4 &port01 0 0 0 3>; + status = "disabled"; }; port02: pci@2,0 { @@ -826,6 +838,7 @@ <0 0 0 2 &port02 0 0 0 1>, <0 0 0 3 &port02 0 0 0 2>, <0 0 0 4 &port02 0 0 0 3>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/apple/t8112-j413.dts b/arch/arm64/boot/dts/apple/t8112-j413.dts new file mode 100644 index 000000000000..6f69658623bf --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-j413.dts @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Air (M2, 2022) + * + * target-type: J413 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8112.dtsi" +#include "t8112-jxxx.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "apple,j413", "apple,t8112", "apple,arm-platform"; + model = "Apple MacBook Air (13-inch, M2, 2022)"; + + aliases { + bluetooth0 = &bluetooth0; + wifi0 = &wifi0; + }; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; + wifi0: wifi@0,0 { + compatible = "pci14e4,4433"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 10 18 00 00 10]; + apple,antenna-sku = "XX"; + brcm,board-type = "apple,hokkaido"; + }; + + bluetooth0: bluetooth@0,1 { + compatible = "pci14e4,5f71"; + reg = <0x10100 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-bd-address = [00 00 00 00 00 00]; + brcm,board-type = "apple,hokkaido"; + }; +}; + +&i2c0 { + /* MagSafe port */ + hpm5: usb-pd@3a { + compatible = "apple,cd321x"; + reg = <0x3a>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-j473.dts b/arch/arm64/boot/dts/apple/t8112-j473.dts new file mode 100644 index 000000000000..06fe257f08be --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-j473.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple Mac mini (M2, 2023) + * + * target-type: J473 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8112.dtsi" +#include "t8112-jxxx.dtsi" + +/ { + compatible = "apple,j473", "apple,t8112", "apple,arm-platform"; + model = "Apple Mac mini (M2, 2023)"; + + aliases { + ethernet0 = ðernet0; + }; +}; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; +}; + +&port01 { + bus-range = <2 2>; + status = "okay"; +}; + +&port02 { + bus-range = <3 3>; + status = "okay"; + ethernet0: ethernet@0,0 { + reg = <0x30000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 10 18 00 00 00]; + }; +}; + +&pcie1_dart { + status = "okay"; +}; + +&pcie2_dart { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts new file mode 100644 index 000000000000..0ad908349f55 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-j493.dts @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple MacBook Pro (13-inch, M1, 2022) + * + * target-type: J493 + * + * Copyright The Asahi Linux Contributors + */ + +/dts-v1/; + +#include "t8112.dtsi" +#include "t8112-jxxx.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + compatible = "apple,j493", "apple,t8112", "apple,arm-platform"; + model = "Apple MacBook Pro (13-inch, M2, 2022)"; + + aliases { + bluetooth0 = &bluetooth0; + wifi0 = &wifi0; + }; + + led-controller { + compatible = "pwm-leds"; + led-0 { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + }; + }; +}; + +/* + * Force the bus number assignments so that we can declare some of the + * on-board devices and properties that are populated by the bootloader + * (such as MAC addresses). + */ +&port00 { + bus-range = <1 1>; + wifi0: wifi@0,0 { + compatible = "pci14e4,4425"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-mac-address = [00 00 00 00 00 00]; + apple,antenna-sku = "XX"; + brcm,board-type = "apple,kyushu"; + }; + + bluetooth0: bluetooth@0,1 { + compatible = "pci14e4,5f69"; + reg = <0x10100 0x0 0x0 0x0 0x0>; + /* To be filled by the loader */ + local-bd-address = [00 00 00 00 00 00]; + brcm,board-type = "apple,kyushu"; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&fpwm1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi new file mode 100644 index 000000000000..f5edf61113e7 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple M2 MacBook Air/Pro (M2, 2022) + * + * This file contains parts common to all Apple M2 devices using the t8112. + * + * target-type: J493, J413 + * + * Copyright The Asahi Linux Contributors + */ + +/ { + aliases { + serial0 = &serial0; + serial2 = &serial2; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "serial0"; + + framebuffer0: framebuffer@0 { + compatible = "apple,simple-framebuffer", "simple-framebuffer"; + reg = <0 0 0 0>; /* To be filled by loader */ + /* Format properties will be added by loader */ + status = "disabled"; + }; + }; + + memory@800000000 { + device_type = "memory"; + reg = <0x8 0 0x2 0>; /* To be filled by loader */ + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + hpm0: usb-pd@38 { + compatible = "apple,cd321x"; + reg = <0x38>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; + + hpm1: usb-pd@3f { + compatible = "apple,cd321x"; + reg = <0x3f>; + interrupt-parent = <&pinctrl_ap>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&nco_clkref { + clock-frequency = <900000000>; +}; diff --git a/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi new file mode 100644 index 000000000000..7c050c6f2707 --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi @@ -0,0 +1,1140 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * PMGR Power domains for the Apple T8112 "M2" SoC + * + * Copyright The Asahi Linux Contributors + */ + + +&pmgr { + ps_sbr: power-controller@100 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x100 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sbr"; + apple,always-on; /* Core device */ + }; + + ps_aic: power-controller@108 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x108 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aic"; + apple,always-on; /* Core device */ + }; + + ps_dwi: power-controller@110 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x110 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dwi"; + apple,always-on; /* Core device */ + }; + + ps_soc_spmi0: power-controller@118 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x118 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "soc_spmi0"; + }; + + ps_gpio: power-controller@120 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x120 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "gpio"; + }; + + ps_pms_busif: power-controller@128 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x128 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_busif"; + apple,always-on; /* Core device */ + }; + + ps_pms: power-controller@130 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x130 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms"; + apple,always-on; /* Core device */ + }; + + ps_pms_c1ppt: power-controller@160 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x160 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_c1ppt"; + power-domains = <&ps_pms>; + }; + + ps_soc_dpe: power-controller@168 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x168 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "soc_dpe"; + apple,always-on; /* Core device */ + }; + + ps_pmgr_soc_ocla: power-controller@170 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x170 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pmgr_soc_ocla"; + power-domains = <&ps_pms>; + }; + + ps_ispsens0: power-controller@178 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x178 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens0"; + }; + + ps_ispsens1: power-controller@180 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x180 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens1"; + }; + + ps_ispsens2: power-controller@188 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x188 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens2"; + }; + + ps_ispsens3: power-controller@190 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x190 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ispsens3"; + }; + + ps_pcie_ref: power-controller@198 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x198 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pcie_ref"; + }; + + ps_aft0: power-controller@1a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aft0"; + }; + + ps_imx: power-controller@1a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "imx"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_sio_busif: power-controller@1b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_busif"; + }; + + ps_sio: power-controller@1b8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio"; + apple,always-on; + power-domains = <&ps_sio_busif>; + }; + + ps_sio_cpu: power-controller@1c0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_cpu"; + power-domains = <&ps_sio>; + }; + + ps_fpwm0: power-controller@1c8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1c8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm0"; + power-domains = <&ps_sio>; + }; + + ps_fpwm1: power-controller@1d0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1d0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm1"; + power-domains = <&ps_sio>; + }; + + ps_fpwm2: power-controller@1d8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "fpwm2"; + power-domains = <&ps_sio>; + }; + + ps_i2c0: power-controller@1e0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c0"; + power-domains = <&ps_sio>; + }; + + ps_i2c1: power-controller@1e8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c1"; + power-domains = <&ps_sio>; + }; + + ps_i2c2: power-controller@1f0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c2"; + power-domains = <&ps_sio>; + }; + + ps_i2c3: power-controller@1f8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x1f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c3"; + power-domains = <&ps_sio>; + }; + + ps_i2c4: power-controller@200 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x200 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "i2c4"; + power-domains = <&ps_sio>; + }; + + ps_spi_p: power-controller@208 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x208 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi_p"; + power-domains = <&ps_sio>; + }; + + ps_uart_p: power-controller@210 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x210 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart_p"; + power-domains = <&ps_sio>; + }; + + ps_audio_p: power-controller@218 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x218 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "audio_p"; + power-domains = <&ps_sio>; + }; + + ps_aes: power-controller@220 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x220 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "aes"; + power-domains = <&ps_sio>; + }; + + ps_spi0: power-controller@228 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x228 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi0"; + power-domains = <&ps_spi_p>; + }; + + ps_spi1: power-controller@230 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x230 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi1"; + power-domains = <&ps_spi_p>; + }; + + ps_spi2: power-controller@238 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x238 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi2"; + power-domains = <&ps_spi_p>; + }; + + ps_spi3: power-controller@240 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x240 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi3"; + power-domains = <&ps_spi_p>; + }; + + ps_spi4: power-controller@248 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x248 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi4"; + power-domains = <&ps_spi_p>; + }; + + ps_spi5: power-controller@250 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x250 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "spi5"; + power-domains = <&ps_spi_p>; + }; + + ps_uart_n: power-controller@258 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x258 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart_n"; + power-domains = <&ps_uart_p>; + }; + + ps_uart0: power-controller@260 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x260 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart0"; + power-domains = <&ps_uart_p>; + }; + + ps_uart1: power-controller@268 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x268 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart1"; + power-domains = <&ps_uart_p>; + }; + + ps_uart2: power-controller@270 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x270 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart2"; + power-domains = <&ps_uart_p>; + }; + + ps_uart3: power-controller@278 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x278 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart3"; + power-domains = <&ps_uart_p>; + }; + + ps_uart4: power-controller@280 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x280 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart4"; + power-domains = <&ps_uart_p>; + }; + + ps_uart5: power-controller@288 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x288 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart5"; + power-domains = <&ps_uart_p>; + }; + + ps_uart6: power-controller@290 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x290 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart6"; + power-domains = <&ps_uart_p>; + }; + + ps_uart7: power-controller@298 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x298 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart7"; + power-domains = <&ps_uart_p>; + }; + + ps_uart8: power-controller@2a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "uart8"; + power-domains = <&ps_uart_p>; + }; + + ps_sio_adma: power-controller@2a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sio_adma"; + power-domains = <&ps_spi_p>, <&ps_audio_p>; + }; + + ps_dpa0: power-controller@2b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa0"; + power-domains = <&ps_audio_p>; + }; + + ps_dpa1: power-controller@2b8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2b8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dpa1"; + power-domains = <&ps_audio_p>; + }; + + ps_mca0: power-controller@2c0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2c0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca0"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca1: power-controller@2c8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2c8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca1"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca2: power-controller@2d0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2d0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca2"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca3: power-controller@2d8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca3"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca4: power-controller@2e0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca4"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mca5: power-controller@2e8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mca5"; + power-domains = <&ps_sio_adma>, <&ps_audio_p>; + }; + + ps_mcc: power-controller@2f0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mcc"; + apple,always-on; /* Memory controller */ + }; + + ps_dcs0: power-controller@2f8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x2f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs0"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs2: power-controller@300 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x300 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs2"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs1: power-controller@308 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x308 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs1"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs3: power-controller@310 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x310 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs3"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs4: power-controller@318 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x318 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs4"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs5: power-controller@320 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x320 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs5"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs6: power-controller@328 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x328 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs6"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_dcs7: power-controller@330 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x330 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dcs7"; + apple,always-on; /* LPDDR4 interface */ + }; + + ps_smx0: power-controller@338 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x338 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "smx0"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_smx1: power-controller@340 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x340 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "smx1"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_apcie: power-controller@348 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x348 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie"; + power-domains = <&ps_imx>, <&ps_pcie_ref>; + }; + + ps_rmx0: power-controller@350 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x350 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "rmx0"; + /* Apple Fabric, display/image stuff: this can power down */ + }; + + ps_rmx1: power-controller@358 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x358 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "rmx1"; + /* Apple Fabric, display/image stuff: this can power down */ + }; + + ps_cmx: power-controller@360 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x360 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "cmx"; + apple,always-on; /* Apple fabric, critical block */ + }; + + ps_mmx: power-controller@368 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x368 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mmx"; + /* Apple Fabric, media stuff: this can power down */ + }; + + ps_disp0_sys: power-controller@370 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x370 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp0_sys"; + power-domains = <&ps_rmx1>; + apple,always-on; /* TODO: figure out if we can enable PM here */ + }; + + ps_disp0_fe: power-controller@378 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x378 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp0_fe"; + power-domains = <&ps_disp0_sys>; + apple,always-on; /* TODO: figure out if we can enable PM here */ + }; + + ps_dispext_sys: power-controller@380 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x380 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_sys"; + power-domains = <&ps_rmx0>; + }; + + ps_dispext_fe: power-controller@388 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x388 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_fe"; + power-domains = <&ps_dispext_sys>; + }; + + ps_dispext_cpu0: power-controller@3c8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3c8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispext_cpu0"; + power-domains = <&ps_dispext_fe>; + apple,min-state = <4>; + }; + + ps_dptx_ext_phy: power-controller@3d8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3d8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dptx_ext_phy"; + }; + + ps_dispdfr_fe: power-controller@3e0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3e0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispdfr_fe"; + power-domains = <&ps_rmx0>; + }; + + ps_dispdfr_be: power-controller@3e8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3e8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "dispdfr_be"; + power-domains = <&ps_dispdfr_fe>; + }; + + ps_mipi_dsi: power-controller@3f0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3f0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "mipi_dsi"; + power-domains = <&ps_dispdfr_be>; + }; + + ps_jpg: power-controller@3f8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x3f8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "jpg"; + power-domains = <&ps_cmx>; + }; + + ps_apcie_gp: power-controller@400 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x400 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_gp"; + power-domains = <&ps_apcie>; + apple,always-on; /* Breaks things if shut down */ + }; + + ps_msr: power-controller@408 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x408 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msr"; + power-domains = <&ps_imx>; + }; + + ps_pmp: power-controller@410 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x410 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pmp"; + apple,always-on; + }; + + ps_pms_sram: power-controller@418 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x418 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "pms_sram"; + apple,always-on; + }; + + ps_msr_ase_core: power-controller@420 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x420 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msr_ase_core"; + power-domains = <&ps_msr>; + }; + + ps_ans: power-controller@428 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x428 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ans"; + power-domains = <&ps_imx>; + }; + + ps_gfx: power-controller@430 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x430 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "gfx"; + }; + + ps_isp_sys: power-controller@438 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x438 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "isp_sys"; + power-domains = <&ps_rmx1>; + }; + + ps_venc_sys: power-controller@440 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x440 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_sys"; + power-domains = <&ps_rmx1>; + }; + + ps_avd_sys: power-controller@448 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x448 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "avd_sys"; + power-domains = <&ps_mmx>; + }; + + ps_apcie_st: power-controller@450 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x450 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "apcie_st"; + power-domains = <&ps_apcie>, <&ps_ans>; + }; + + ps_atc0_common: power-controller@458 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x458 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_common"; + power-domains = <&ps_imx>; + }; + + ps_atc0_pcie: power-controller@460 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x460 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_pcie"; + power-domains = <&ps_atc0_common>; + }; + + ps_atc0_cio: power-controller@468 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x468 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio"; + power-domains = <&ps_atc0_common>; + }; + + ps_atc0_cio_pcie: power-controller@470 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x470 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio_pcie"; + power-domains = <&ps_atc0_cio>; + }; + + ps_atc0_cio_usb: power-controller@478 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x478 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_cio_usb"; + power-domains = <&ps_atc0_cio>; + }; + + ps_atc1_common: power-controller@480 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x480 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_common"; + power-domains = <&ps_rmx0>; + }; + + ps_atc1_pcie: power-controller@488 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x488 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_pcie"; + power-domains = <&ps_atc1_common>; + }; + + ps_atc1_cio: power-controller@490 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x490 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio"; + power-domains = <&ps_atc1_common>; + }; + + ps_atc1_cio_pcie: power-controller@498 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x498 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio_pcie"; + power-domains = <&ps_atc1_cio>; + }; + + ps_atc1_cio_usb: power-controller@4a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x4a0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_cio_usb"; + power-domains = <&ps_atc1_cio>; + }; + + ps_ane_sys: power-controller@4a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x4a8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "ane_sys"; + power-domains = <&ps_mmx>; + }; + + ps_scodec: power-controller@4b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x4b0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "scodec"; + power-domains = <&ps_rmx0>; + }; + + ps_sep: power-controller@c00 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xc00 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "sep"; + apple,always-on; + }; + + ps_venc_dma: power-controller@8000 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8000 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_dma"; + power-domains = <&ps_venc_sys>; + }; + + ps_venc_pipe4: power-controller@8008 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8008 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_pipe4"; + power-domains = <&ps_venc_dma>; + }; + + ps_venc_pipe5: power-controller@8010 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8010 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_pipe5"; + power-domains = <&ps_venc_dma>; + }; + + ps_venc_me0: power-controller@8018 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8018 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_me0"; + power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>; + }; + + ps_venc_me1: power-controller@8020 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x8020 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "venc_me1"; + power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>; + }; + + ps_disp0_cpu0: power-controller@10000 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x10000 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "disp0_cpu0"; + power-domains = <&ps_disp0_fe>; + apple,min-state = <4>; + }; +}; + +&pmgr_mini { + + ps_debug_gated: power-controller@58 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x58 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "debug_gated"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_spmi0: power-controller@60 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x60 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi0"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_spmi1: power-controller@68 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x68 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_spmi1"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_aon: power-controller@70 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x70 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_aon"; + apple,always-on; /* Core AON device */ + }; + + ps_msg: power-controller@78 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x78 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "msg"; + }; + + ps_nub_gpio: power-controller@80 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x80 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_gpio"; + apple,always-on; + }; + + ps_atc0_usb_aon: power-controller@88 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x88 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_usb_aon"; + apple,always-on; /* Needs to stay on for dwc3 to work */ + }; + + ps_atc1_usb_aon: power-controller@90 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x90 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_usb_aon"; + apple,always-on; /* Needs to stay on for dwc3 to work */ + }; + + ps_atc0_usb: power-controller@98 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0x98 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc0_usb"; + power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>; + }; + + ps_atc1_usb: power-controller@a0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xa0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "atc1_usb"; + power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>; + }; + + ps_nub_fabric: power-controller@a8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xa8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_fabric"; + apple,always-on; /* Core AON device */ + }; + + ps_nub_sram: power-controller@b0 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xb0 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "nub_sram"; + apple,always-on; /* Core AON device */ + }; + + ps_debug_switch: power-controller@b8 { + compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate"; + reg = <0xb8 4>; + #power-domain-cells = <0>; + #reset-cells = <0>; + label = "debug_switch"; + apple,always-on; /* Core AON device */ + }; +}; diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi new file mode 100644 index 000000000000..1666e6ab250b --- /dev/null +++ b/arch/arm64/boot/dts/apple/t8112.dtsi @@ -0,0 +1,921 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Apple T8112 "M2" SoC + * + * Other names: H14G + * + * Copyright The Asahi Linux Contributors + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/apple-aic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/apple.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + compatible = "apple,t8112", "apple,arm-platform"; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu_e0>; + }; + core1 { + cpu = <&cpu_e1>; + }; + core2 { + cpu = <&cpu_e2>; + }; + core3 { + cpu = <&cpu_e3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu_p0>; + }; + core1 { + cpu = <&cpu_p1>; + }; + core2 { + cpu = <&cpu_p2>; + }; + core3 { + cpu = <&cpu_p3>; + }; + }; + }; + + cpu_e0: cpu@0 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e1: cpu@1 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e2: cpu@2 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_e3: cpu@3 { + compatible = "apple,blizzard"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&ecluster_opp>; + capacity-dmips-mhz = <756>; + performance-domains = <&cpufreq_e>; + next-level-cache = <&l2_cache_0>; + i-cache-size = <0x20000>; + d-cache-size = <0x10000>; + }; + + cpu_p0: cpu@10100 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10100>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p1: cpu@10101 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10101>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p2: cpu@10102 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10102>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + cpu_p3: cpu@10103 { + compatible = "apple,avalanche"; + device_type = "cpu"; + reg = <0x0 0x10103>; + enable-method = "spin-table"; + cpu-release-addr = <0 0>; /* To be filled by loader */ + operating-points-v2 = <&pcluster_opp>; + capacity-dmips-mhz = <1024>; + performance-domains = <&cpufreq_p>; + next-level-cache = <&l2_cache_1>; + i-cache-size = <0x30000>; + d-cache-size = <0x20000>; + }; + + l2_cache_0: l2-cache-0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x400000>; + }; + + l2_cache_1: l2-cache-1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x1000000>; + }; + }; + + ecluster_opp: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-level = <1>; + clock-latency-ns = <7500>; + }; + opp02 { + opp-hz = /bits/ 64 <912000000>; + opp-level = <2>; + clock-latency-ns = <20000>; + }; + opp03 { + opp-hz = /bits/ 64 <1284000000>; + opp-level = <3>; + clock-latency-ns = <22000>; + }; + opp04 { + opp-hz = /bits/ 64 <1752000000>; + opp-level = <4>; + clock-latency-ns = <30000>; + }; + opp05 { + opp-hz = /bits/ 64 <2004000000>; + opp-level = <5>; + clock-latency-ns = <35000>; + }; + opp06 { + opp-hz = /bits/ 64 <2256000000>; + opp-level = <6>; + clock-latency-ns = <39000>; + }; + opp07 { + opp-hz = /bits/ 64 <2424000000>; + opp-level = <7>; + clock-latency-ns = <53000>; + }; + }; + + pcluster_opp: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp01 { + opp-hz = /bits/ 64 <660000000>; + opp-level = <1>; + clock-latency-ns = <9000>; + }; + opp02 { + opp-hz = /bits/ 64 <924000000>; + opp-level = <2>; + clock-latency-ns = <19000>; + }; + opp03 { + opp-hz = /bits/ 64 <1188000000>; + opp-level = <3>; + clock-latency-ns = <22000>; + }; + opp04 { + opp-hz = /bits/ 64 <1452000000>; + opp-level = <4>; + clock-latency-ns = <24000>; + }; + opp05 { + opp-hz = /bits/ 64 <1704000000>; + opp-level = <5>; + clock-latency-ns = <26000>; + }; + opp06 { + opp-hz = /bits/ 64 <1968000000>; + opp-level = <6>; + clock-latency-ns = <28000>; + }; + opp07 { + opp-hz = /bits/ 64 <2208000000>; + opp-level = <7>; + clock-latency-ns = <30000>; + }; + opp08 { + opp-hz = /bits/ 64 <2400000000>; + opp-level = <8>; + clock-latency-ns = <33000>; + }; + opp09 { + opp-hz = /bits/ 64 <2568000000>; + opp-level = <9>; + clock-latency-ns = <34000>; + }; + opp10 { + opp-hz = /bits/ 64 <2724000000>; + opp-level = <10>; + clock-latency-ns = <36000>; + }; + opp11 { + opp-hz = /bits/ 64 <2868000000>; + opp-level = <11>; + clock-latency-ns = <41000>; + }; + opp12 { + opp-hz = /bits/ 64 <2988000000>; + opp-level = <12>; + clock-latency-ns = <42000>; + }; + opp13 { + opp-hz = /bits/ 64 <3096000000>; + opp-level = <13>; + clock-latency-ns = <44000>; + }; + opp14 { + opp-hz = /bits/ 64 <3204000000>; + opp-level = <14>; + clock-latency-ns = <46000>; + }; + /* Not available until CPU deep sleep is implemented */ +#if 0 + opp15 { + opp-hz = /bits/ 64 <3324000000>; + opp-level = <15>; + clock-latency-ns = <62000>; + turbo-mode; + }; + opp16 { + opp-hz = /bits/ 64 <3408000000>; + opp-level = <16>; + clock-latency-ns = <62000>; + turbo-mode; + }; + opp17 { + opp-hz = /bits/ 64 <3504000000>; + opp-level = <17>; + clock-latency-ns = <62000>; + turbo-mode; + }; +#endif + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&aic>; + interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt"; + interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>, + <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu-e { + compatible = "apple,blizzard-pmu"; + interrupt-parent = <&aic>; + interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu-p { + compatible = "apple,avalanche-pmu"; + interrupt-parent = <&aic>; + interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>; + }; + + clkref: clock-ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "clkref"; + }; + + /* + * This is a fabulated representation of the input clock + * to NCO since we don't know the true clock tree. + */ + nco_clkref: clock-ref-nco { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "nco_ref"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + ranges; + nonposted-mmio; + + cpufreq_e: cpufreq@210e20000 { + compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq"; + reg = <0x2 0x10e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + cpufreq_p: cpufreq@211e20000 { + compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq"; + reg = <0x2 0x11e20000 0 0x1000>; + #performance-domain-cells = <0>; + }; + + sio_dart: iommu@235004000 { + compatible = "apple,t8110-dart"; + reg = <0x2 0x35004000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 769 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + power-domains = <&ps_sio_cpu>; + }; + + i2c0: i2c@235010000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35010000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 761 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c0>; + status = "disabled"; + }; + + i2c1: i2c@235014000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35014000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 762 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c1>; + status = "disabled"; + }; + + i2c2: i2c@235018000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35018000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 763 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c2>; + status = "disabled"; + }; + + i2c3: i2c@23501c000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x3501c000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 764 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c3>; + status = "disabled"; + }; + + i2c4: i2c@235020000 { + compatible = "apple,t8112-i2c", "apple,i2c"; + reg = <0x2 0x35020000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 765 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + #address-cells = <0x1>; + #size-cells = <0x0>; + power-domains = <&ps_i2c4>; + status = "disabled"; + }; + + fpwm1: pwm@235044000 { + compatible = "apple,t8112-fpwm", "apple,s5l-fpwm"; + reg = <0x2 0x35044000 0x0 0x4000>; + power-domains = <&ps_fpwm1>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + + serial0: serial@235200000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0x35200000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 739 IRQ_TYPE_LEVEL_HIGH>; + /* + * TODO: figure out the clocking properly, there may + * be a third selectable clock. + */ + clocks = <&clkref>, <&clkref>; + clock-names = "uart", "clk_uart_baud0"; + power-domains = <&ps_uart0>; + status = "disabled"; + }; + + serial2: serial@235208000 { + compatible = "apple,s5l-uart"; + reg = <0x2 0x35208000 0x0 0x1000>; + reg-io-width = <4>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 741 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkref>, <&clkref>; + clock-names = "uart", "clk_uart_baud0"; + power-domains = <&ps_uart2>; + status = "disabled"; + }; + + admac: dma-controller@238200000 { + compatible = "apple,t8112-admac", "apple,admac"; + reg = <0x2 0x38200000 0x0 0x34000>; + dma-channels = <24>; + interrupts-extended = <0>, + <&aic AIC_IRQ 760 IRQ_TYPE_LEVEL_HIGH>, + <0>, + <0>; + #dma-cells = <1>; + iommus = <&sio_dart 2>; + power-domains = <&ps_sio_adma>; + resets = <&ps_audio_p>; + }; + + mca: i2s@238400000 { + compatible = "apple,t8112-mca", "apple,mca"; + reg = <0x2 0x38400000 0x0 0x18000>, + <0x2 0x38300000 0x0 0x30000>; + + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 753 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 754 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 755 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 756 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 757 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 758 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&ps_audio_p>; + clocks = <&nco 0>, <&nco 1>, <&nco 2>, + <&nco 3>, <&nco 4>, <&nco 4>; + power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>, + <&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>; + dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>, + <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>, + <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>, + <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>, + <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>, + <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>; + dma-names = "tx0a", "rx0a", "tx0b", "rx0b", + "tx1a", "rx1a", "tx1b", "rx1b", + "tx2a", "rx2a", "tx2b", "rx2b", + "tx3a", "rx3a", "tx3b", "rx3b", + "tx4a", "rx4a", "tx4b", "rx4b", + "tx5a", "rx5a", "tx5b", "rx5b"; + + #sound-dai-cells = <1>; + }; + + nco: clock-controller@23b044000 { + compatible = "apple,t8112-nco", "apple,nco"; + reg = <0x2 0x3b044000 0x0 0x14000>; + clocks = <&nco_clkref>; + #clock-cells = <1>; + }; + + aic: interrupt-controller@23b0c0000 { + compatible = "apple,t8112-aic", "apple,aic2"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2 0x3b0c0000 0x0 0x8000>, + <0x2 0x3b0c8000 0x0 0x4>; + reg-names = "core", "event"; + power-domains = <&ps_aic>; + + affinities { + e-core-pmu-affinity { + apple,fiq-index = <AIC_CPU_PMU_E>; + cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>; + }; + + p-core-pmu-affinity { + apple,fiq-index = <AIC_CPU_PMU_P>; + cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>; + }; + }; + }; + + pmgr: power-management@23b700000 { + compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2 0x3b700000 0 0x14000>; + /* child nodes are added in t8103-pmgr.dtsi */ + }; + + pinctrl_ap: pinctrl@23c100000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3c100000 0x0 0x100000>; + power-domains = <&ps_gpio>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_ap 0 0 213>; + apple,npins = <213>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>; + + i2c0_pins: i2c0-pins { + pinmux = <APPLE_PINMUX(111, 1)>, + <APPLE_PINMUX(110, 1)>; + }; + + i2c1_pins: i2c1-pins { + pinmux = <APPLE_PINMUX(113, 1)>, + <APPLE_PINMUX(112, 1)>; + }; + + i2c2_pins: i2c2-pins { + pinmux = <APPLE_PINMUX(87, 1)>, + <APPLE_PINMUX(86, 1)>; + }; + + i2c3_pins: i2c3-pins { + pinmux = <APPLE_PINMUX(54, 1)>, + <APPLE_PINMUX(53, 1)>; + }; + + i2c4_pins: i2c4-pins { + pinmux = <APPLE_PINMUX(131, 1)>, + <APPLE_PINMUX(130, 1)>; + }; + + spi3_pins: spi3-pins { + pinmux = <APPLE_PINMUX(46, 1)>, + <APPLE_PINMUX(47, 1)>, + <APPLE_PINMUX(48, 1)>, + <APPLE_PINMUX(49, 1)>; + }; + + pcie_pins: pcie-pins { + pinmux = <APPLE_PINMUX(162, 1)>, + <APPLE_PINMUX(163, 1)>, + <APPLE_PINMUX(164, 1)>; + // TODO: 1 more CLKREQs + }; + }; + + pinctrl_nub: pinctrl@23d1f0000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3d1f0000 0x0 0x4000>; + power-domains = <&ps_nub_gpio>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nub 0 0 24>; + apple,npins = <24>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 371 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 372 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 373 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 374 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 375 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 376 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 377 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmgr_mini: power-management@23d280000 { + compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2 0x3d280000 0 0x4000>; + /* child nodes are added in t8103-pmgr.dtsi */ + }; + + wdt: watchdog@23d2b0000 { + compatible = "apple,t8112-wdt", "apple,wdt"; + reg = <0x2 0x3d2b0000 0x0 0x4000>; + clocks = <&clkref>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_smc: pinctrl@23e820000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x3e820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_smc 0 0 18>; + apple,npins = <18>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 490 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 491 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 492 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 493 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 494 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 495 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 496 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_aop: pinctrl@24a820000 { + compatible = "apple,t8112-pinctrl", "apple,pinctrl"; + reg = <0x2 0x4a820000 0x0 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aop 0 0 54>; + apple,npins = <54>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 301 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 302 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 303 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>; + }; + + ans_mbox: mbox@277408000 { + compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4"; + reg = <0x2 0x77408000 0x0 0x4000>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 717 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 718 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 719 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 720 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "send-empty", "send-not-empty", + "recv-empty", "recv-not-empty"; + #mbox-cells = <0>; + power-domains = <&ps_ans>; + }; + + sart: sart@27bc50000 { + compatible = "apple,t8112-sart", "apple,t6000-sart"; + reg = <0x2 0x7bc50000 0x0 0x10000>; + power-domains = <&ps_ans>; + }; + + nvme@27bcc0000 { + compatible = "apple,t8112-nvme-ans2", "apple,nvme-ans2"; + reg = <0x2 0x7bcc0000 0x0 0x40000>, + <0x2 0x77400000 0x0 0x4000>; + reg-names = "nvme", "ans"; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 724 IRQ_TYPE_LEVEL_HIGH>; + mboxes = <&ans_mbox>; + apple,sart = <&sart>; + power-domains = <&ps_ans>, <&ps_apcie_st>; + power-domain-names = "ans", "apcie0"; + resets = <&ps_ans>; + }; + + pcie0_dart: iommu@681008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x81008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 782 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + }; + + pcie1_dart: iommu@682008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x82008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 785 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + status = "disabled"; + }; + + pcie2_dart: iommu@683008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x83008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 788 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + status = "disabled"; + }; + + pcie3_dart: iommu@684008000 { + compatible = "apple,t8110-dart"; + reg = <0x6 0x84008000 0x0 0x4000>; + #iommu-cells = <1>; + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 791 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&ps_apcie_gp>; + status = "disabled"; + }; + + pcie0: pcie@690000000 { + compatible = "apple,t8112-pcie", "apple,pcie"; + device_type = "pci"; + + reg = <0x6 0x90000000 0x0 0x1000000>, + <0x6 0x80000000 0x0 0x100000>, + <0x6 0x81000000 0x0 0x4000>, + <0x6 0x82000000 0x0 0x4000>, + <0x6 0x83000000 0x0 0x4000>, + <0x6 0x84000000 0x0 0x4000>; + reg-names = "config", "rc", "port0", "port1", "port2", "port3"; + + interrupt-parent = <&aic>; + interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 784 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 787 IRQ_TYPE_LEVEL_HIGH>, + <AIC_IRQ 790 IRQ_TYPE_LEVEL_HIGH>; + + msi-controller; + msi-parent = <&pcie0>; + msi-ranges = <&aic AIC_IRQ 793 IRQ_TYPE_EDGE_RISING 32>; + + iommu-map = <0x100 &pcie0_dart 0 1>, + <0x200 &pcie1_dart 1 1>, + <0x300 &pcie2_dart 2 1>, + <0x400 &pcie3_dart 3 1>; + iommu-map-mask = <0xff00>; + + bus-range = <0 4>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>, + <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>; + + power-domains = <&ps_apcie_gp>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + + port00: pci@0,0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 166 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port00 0 0 0 0>, + <0 0 0 2 &port00 0 0 0 1>, + <0 0 0 3 &port00 0 0 0 2>, + <0 0 0 4 &port00 0 0 0 3>; + }; + + port01: pci@1,0 { + device_type = "pci"; + reg = <0x800 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 167 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port01 0 0 0 0>, + <0 0 0 2 &port01 0 0 0 1>, + <0 0 0 3 &port01 0 0 0 2>, + <0 0 0 4 &port01 0 0 0 3>; + + status = "disabled"; + }; + + port02: pci@2,0 { + device_type = "pci"; + reg = <0x1000 0x0 0x0 0x0 0x0>; + reset-gpios = <&pinctrl_ap 168 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port02 0 0 0 0>, + <0 0 0 2 &port02 0 0 0 1>, + <0 0 0 3 &port02 0 0 0 2>, + <0 0 0 4 &port02 0 0 0 3>; + + status = "disabled"; + }; + + /* TODO: GPIO unknown */ + port03: pci@3,0 { + device_type = "pci"; + reg = <0x1800 0x0 0x0 0x0 0x0>; + //reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &port03 0 0 0 0>, + <0 0 0 2 &port03 0 0 0 1>, + <0 0 0 3 &port03 0 0 0 2>, + <0 0 0 4 &port03 0 0 0 3>; + + status = "disabled"; + }; + }; + }; +}; + +#include "t8112-pmgr.dtsi" diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts index d8b60575eb4f..78204d71ecd2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts @@ -58,12 +58,16 @@ function = "usb2"; color = <LED_COLOR_ID_WHITE>; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; led-usb3 { function = "usb3"; color = <LED_COLOR_ID_WHITE>; gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>; + linux,default-trigger = "usbport"; }; led-wifi { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts index 296393d4aaab..fcf092c81b59 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts @@ -64,12 +64,16 @@ function = "usb2"; color = <LED_COLOR_ID_BLUE>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; }; led-usb3 { - function = "usbd3"; + function = "usb3"; color = <LED_COLOR_ID_BLUE>; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>; + linux,default-trigger = "usbport"; }; led-brightness { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts index 839ca33178b0..d94a53d68320 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts @@ -120,7 +120,7 @@ }; &leds { - led-power@11 { + led@11 { reg = <0x11>; function = LED_FUNCTION_POWER; color = <LED_COLOR_ID_WHITE>; @@ -130,7 +130,7 @@ pinctrl-0 = <&pins_led_17_a>; }; - led-wan-red@12 { + led@12 { reg = <0x12>; function = LED_FUNCTION_WAN; color = <LED_COLOR_ID_RED>; @@ -139,7 +139,7 @@ pinctrl-0 = <&pins_led_18_a>; }; - led-wps@14 { + led@14 { reg = <0x14>; function = LED_FUNCTION_WPS; color = <LED_COLOR_ID_WHITE>; @@ -148,7 +148,7 @@ pinctrl-0 = <&pins_led_20_a>; }; - led-wan-white@15 { + led@15 { reg = <0x15>; function = LED_FUNCTION_WAN; color = <LED_COLOR_ID_WHITE>; @@ -157,7 +157,7 @@ pinctrl-0 = <&pins_led_21_a>; }; - led-lan@19 { + led@19 { reg = <0x19>; function = LED_FUNCTION_LAN; color = <LED_COLOR_ID_WHITE>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi index eb2a78f4e033..457805efb385 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi @@ -107,6 +107,12 @@ clock-frequency = <50000000>; clock-output-names = "periph"; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; soc { @@ -142,6 +148,19 @@ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ehci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ehci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; ohci: usb@c400 { @@ -150,6 +169,19 @@ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_phy PHY_TYPE_USB2>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ohci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + ohci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; xhci: usb@d000 { @@ -158,6 +190,19 @@ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb_phy PHY_TYPE_USB3>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + xhci_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + xhci_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; }; bus@80000 { @@ -254,7 +299,7 @@ }; }; - procmon: syscon@280000 { + procmon: bus@280000 { compatible = "simple-bus"; reg = <0x280000 0x1000>; ranges; @@ -531,6 +576,18 @@ #size-cells = <0>; }; + hsspi: spi@1000{ + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + nand-controller@1800 { #address-cells = <1>; #size-cells = <0>; @@ -538,7 +595,7 @@ reg = <0x1800 0x600>, <0x2000 0x10>; reg-names = "nand", "nand-int-base"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "nand"; + interrupt-names = "nand_ctlrdy"; status = "okay"; nandcs: nand@0 { diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi index d5bc31980f03..46aa8c0b7971 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi @@ -79,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -117,6 +124,19 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi index 6f805266d3c9..7020f2e995e2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi @@ -60,6 +60,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -67,6 +68,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -99,6 +106,18 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi index b982249b80a2..6a0242cbea57 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi @@ -79,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -117,6 +124,18 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi index a996d436e977..1a12905266ef 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi @@ -79,6 +79,7 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + uart_clk: uart-clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -86,6 +87,12 @@ clock-div = <4>; clock-mult = <1>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; }; psci { @@ -117,6 +124,19 @@ #size-cells = <1>; ranges = <0x0 0x0 0xff800000 0x800000>; + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1"; + reg = <0x1000 0x600>, <0x2610 0x4>; + reg-names = "hsspi", "spim-ctrl"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; + uart0: serial@12000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x12000 0x1000>; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi index 62c530d4b103..f41ebc30666f 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi @@ -60,6 +60,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -100,5 +106,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi index 34c7b513d363..fa2688f41f06 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi @@ -78,6 +78,12 @@ #clock-cells = <0>; clock-frequency = <200000000>; }; + + hsspi_pll: hsspi-pll { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + }; }; psci { @@ -137,5 +143,17 @@ clock-names = "refclk"; status = "disabled"; }; + + hsspi: spi@1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0"; + reg = <0x1000 0x600>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&hsspi_pll &hsspi_pll>; + clock-names = "hsspi", "pll"; + num-cs = <8>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts index fcbd3c430ace..c4e6e71f6310 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts index a3623e6f6919..e69cd683211a 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts index e39f1e6d4774..db2c82d6dfd8 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts index eba07e0b1ca6..25c12bc63545 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts index af17091ae764..faba21f03120 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts index 032aeb75c983..9808331eede2 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts index 0cbf582f5d54..1f561c8e13b0 100644 --- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts +++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts @@ -28,3 +28,7 @@ &uart0 { status = "okay"; }; + +&hsspi { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index a9186166c068..388424b3e1d3 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -178,7 +178,7 @@ <0x02e00000 0x600000>; /* GICR */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic_its: gic-its@63c20000 { + gic_its: msi-controller@63c20000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi index e0a71795261b..8ad31dee11a3 100644 --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi @@ -389,9 +389,10 @@ <0x8010 0x80000000 0x0 0x600000>; /* GICR */ interrupts = <1 9 0xf04>; - its: gic-its@8010,00020000 { + its: msi-controller@801000020000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x8010 0x20000 0x0 0x200000>; }; }; diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index dfb41705a9a9..3419bd252696 100644 --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -55,7 +55,7 @@ method = "smc"; }; - gic: interrupt-controller@400080000 { + gic: interrupt-controller@4000080000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; #address-cells = <2>; @@ -67,7 +67,7 @@ <0x04 0x01000000 0x0 0x1000000>; /* GICR */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gicits: gic-its@40010000 { + gicits: msi-controller@4000100000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x04 0x00100000 0x0 0x20000>; /* GIC ITS */ diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index f54f30633417..e4ed788413fe 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -21,6 +21,8 @@ gsc0 = &gsc_0; gsc1 = &gsc_1; gsc2 = &gsc_2; + mmc0 = &mshc_0; + mmc2 = &mshc_2; pinctrl0 = &pinctrl_alive; pinctrl1 = &pinctrl_aud; pinctrl2 = &pinctrl_cpif; @@ -40,8 +42,6 @@ spi2 = &spi_2; spi3 = &spi_3; spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; }; chosen { @@ -952,6 +952,7 @@ &mshc_0 { status = "okay"; + mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; cap-mmc-highspeed; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 5519a80576c5..91ae0462a706 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -911,12 +911,20 @@ }; pmu_system_controller: system-controller@105c0000 { - compatible = "samsung,exynos5433-pmu", "syscon"; + compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon"; reg = <0x105c0000 0x5008>; #clock-cells = <1>; clock-names = "clkout16"; clocks = <&xxti>; + mipi_phy: mipi-phy { + compatible = "samsung,exynos5433-mipi-video-phy"; + #phy-cells = <1>; + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,cam1-sysreg = <&syscon_cam1>; + samsung,disp-sysreg = <&syscon_disp>; + }; + reboot: syscon-reboot { compatible = "syscon-reboot"; regmap = <&pmu_system_controller>; @@ -936,15 +944,6 @@ interrupts = <GIC_PPI 9 0xf04>; }; - mipi_phy: video-phy { - compatible = "samsung,exynos5433-mipi-video-phy"; - #phy-cells = <1>; - samsung,pmu-syscon = <&pmu_system_controller>; - samsung,cam0-sysreg = <&syscon_cam0>; - samsung,cam1-sysreg = <&syscon_cam1>; - samsung,disp-sysreg = <&syscon_disp>; - }; - decon: decon@13800000 { compatible = "samsung,exynos5433-decon"; reg = <0x13800000 0x2104>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index f3f4a6ab4b49..1f2eddcebdd9 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -17,9 +17,9 @@ compatible = "samsung,exynos7-espresso", "samsung,exynos7"; aliases { + mmc0 = &mmc_0; + mmc2 = &mmc_2; serial0 = &serial_2; - mshc0 = &mmc_0; - mshc2 = &mmc_2; }; chosen { @@ -362,6 +362,7 @@ &mmc_0 { status = "okay"; cap-mmc-highspeed; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; card-detect-delay = <200>; diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts index 5db9a81ac7bb..47a389d9ff7d 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts @@ -18,6 +18,7 @@ chassis-type = "handset"; aliases { + mmc0 = &mmc_0; serial0 = &serial_0; serial1 = &serial_1; serial2 = &serial_2; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index a38fe5129937..d67e98120313 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -245,6 +245,15 @@ "dout_peri_uart", "dout_peri_ip"; }; + cmu_g3d: clock-controller@11400000 { + compatible = "samsung,exynos850-cmu-g3d"; + reg = <0x11400000 0x8000>; + #clock-cells = <1>; + + clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>; + clock-names = "oscclk", "dout_g3d_switch"; + }; + cmu_apm: clock-controller@11800000 { compatible = "samsung,exynos850-cmu-apm"; reg = <0x11800000 0x8000>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 198fff3731ae..ef7d17aef58f 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -89,8 +89,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb @@ -122,9 +124,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 9e50976bcb8e..678bb0358751 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -131,7 +131,7 @@ interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index e5fb137ac02b..8f6090a9aef2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -123,7 +123,7 @@ #size-cells = <2>; ranges; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x6020000 0 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 348d9e3a9125..d2f5345d0560 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -60,7 +60,7 @@ interrupt-controller; interrupts = <1 9 0x4>; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x6020000 0 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 50c19e8405d5..ea6a94b57aeb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -395,7 +395,7 @@ interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - its: gic-its@6020000 { + its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0x6020000 0 0x20000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi new file mode 100644 index 000000000000..685d4294f4f1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + regulator-name = "VCC USBH2(ABCD) / USBH(3|4)"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +/* TODO: Audio Mixer */ + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* TODO: Display Controller */ + +/* TODO: DPU */ + +/* Apalis ETH1 */ +&fec1 { + status = "okay"; +}; + +/* Apalis CAN1 */ +&flexcan1 { + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + status = "okay"; +}; + +/* TODO: GPU */ + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + status = "okay"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + status = "okay"; +}; + +/* Apalis SPI1 */ +&lpspi0 { + status = "okay"; +}; + +/* Apalis SPI2 */ +&lpspi2 { + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + status = "okay"; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Apalis Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* Apalis USBO1 */ +&usbotg1 { + status = "okay"; +}; + +/* TODO: Apalis USBH4 SuperSpeed */ + +/* Apalis MMC1 */ +&usdhc2 { + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi new file mode 100644 index 000000000000..c6d51f116298 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/leds/common.h> + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + /* LED_4_GREEN / MXM3_188 */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>; + }; + + /* LED_4_RED / MXM3_178 */ + led-2 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_GREEN / MXM3_152 */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_RED / MXM3_156 */ + led-4 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + regulator-name = "VCC_USBH(2|4)"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +/* TODO: Audio Mixer */ + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* TODO: Display Controller */ + +/* TODO: DPU */ + +/* Apalis ETH1 */ +&fec1 { + status = "okay"; +}; + +/* Apalis CAN1 */ +&flexcan1 { + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + status = "okay"; +}; + +/* TODO: GPU */ + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + status = "okay"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>, + <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, + <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, + <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, + <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>, + <&pinctrl_sim0_gpios>, <&pinctrl_uart24_forceoff>, + <&pinctrl_usdhc1_gpios>; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27 0x06000061>, /* LED_4_GREEN */ + <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29 0x06000061>, /* LED_4_RED */ + <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x06000061>, /* LED_5_GREEN */ + <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x06000061>; /* LED_5_RED */ + }; + + pinctrl_uart24_forceoff: uart24forceoffgrp { + fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25 0x00000021>; + }; +}; + +/* Apalis SPI1 */ +&lpspi0 { + status = "okay"; +}; + +/* Apalis SPI2 */ +&lpspi2 { + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + status = "okay"; +}; + +&lsio_gpio5 { + gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03", + "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07", + "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11", + "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15", + "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19", + "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23", + "gpio5-24", "UART24-FORCEOFF", "gpio5-26", + "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", + "gpio5-31"; + ngpios = <32>; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Apalis Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* Apalis USBO1 */ +&usbotg1 { + status = "okay"; +}; + +/* TODO: Apalis USBH4 SuperSpeed */ + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; + bus-width = <4>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi new file mode 100644 index 000000000000..40067ab8aa74 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/leds/common.h> + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_ixora>; + + /* LED_4_GREEN / MXM3_188 */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>; + }; + + /* LED_4_RED / MXM3_178 */ + led-2 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_GREEN / MXM3_152 */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>; + }; + + /* LED_5_RED / MXM3_156 */ + led-4 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_STATUS; + gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + /* MMC1_PWR_CTRL */ + gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + }; + + reg_can1_supply: regulator-can1-supply { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_can1_power>; + gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "can1_supply"; + }; + + reg_can2_supply: regulator-can2-supply { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sata1_act>; + gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "can2_supply"; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + regulator-name = "VCC_USBH(2|4)"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +/* TODO: Audio Mixer */ + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* TODO: Display Controller */ + +/* TODO: DPU */ + +/* Apalis ETH1 */ +&fec1 { + status = "okay"; +}; + +/* Apalis CAN1 */ +&flexcan1 { + xceiver-supply = <®_can1_supply>; + status = "okay"; +}; + +/* Apalis CAN2 */ +&flexcan2 { + xceiver-supply = <®_can2_supply>; + status = "okay"; +}; + +/* TODO: GPU */ + +/* Apalis I2C1 */ +&i2c2 { + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + status = "okay"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + status = "okay"; +}; + +&iomuxc { + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>, + <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, + <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, + <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, + <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>, + <&pinctrl_uart24_forceoff>, <&pinctrl_usdhc1_gpios>; + + /* PMIC MMC1 power-switch */ + pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19 0x00000021>; /* MXM3_148, PMIC */ + }; + + /* FlexCAN PMIC */ + pinctrl_enable_can1_power: enablecan1powergrp { + fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021>; /* MXM3_158, PMIC */ + }; + + pinctrl_leds_ixora: ledsixoragrp { + fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27 0x06000061>, /* LED_4_GREEN */ + <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29 0x06000061>, /* LED_4_RED */ + <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20 0x06000061>, /* LED_5_GREEN */ + <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x06000061>; /* LED_5_RED */ + }; + + pinctrl_uart24_forceoff: uart24forceoffgrp { + fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25 0x00000021>; + }; +}; + +/* Apalis SPI1 */ +&lpspi0 { + status = "okay"; +}; + +/* Apalis SPI2 */ +&lpspi2 { + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + status = "okay"; +}; + +&lsio_gpio5 { + gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03", + "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07", + "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11", + "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15", + "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19", + "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23", + "gpio5-24", "UART24-FORCEOFF", "gpio5-26", + "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30", + "gpio5-31"; + ngpios = <32>; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Apalis Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* Apalis USBO1 */ +&usbotg1 { + status = "okay"; +}; + +/* TODO: Apalis USBH4 SuperSpeed */ + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>; + bus-width = <4>; + cap-power-off-card; + /delete-property/ no-1-8-v; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi new file mode 100644 index 000000000000..bd5d771637ca --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi @@ -0,0 +1,1484 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/pwm/pwm.h> + +/ { + chosen { + stdout-path = &lpuart1; + }; + + /* Apalis BKL1 */ + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bkl_on>; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; + enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */ + /* TODO: hook-up to Apalis BKL1_PWM */ + status = "disabled"; + }; + + gpio_fan: gpio-fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio8>; + gpios = <&lsio_gpio3 28 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 3000 1>; + }; + + /* TODO: LVDS Panel */ + + /* TODO: Shared PCIe/SATA Reference Clock */ + + /* TODO: PCIe Wi-Fi Reference Clock */ + + /* + * Power management bus used to control LDO1OUT of the + * second PMIC PF8100. This is used for controlling voltage levels of + * typespecific RGMII signals and Apalis UART2_RTS UART2_CTS. + * + * IMX_SC_R_BOARD_R1 for 3.3V + * IMX_SC_R_BOARD_R2 for 1.8V + * IMX_SC_R_BOARD_R3 for 2.5V + * Note that for 2.5V operation the pad muxing needs to be changed, + * compare with PSW_OVR field of IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD. + * + * those power domains are mutually exclusive. + */ + reg_ext_rgmii: regulator-ext-rgmii { + compatible = "regulator-fixed"; + power-domains = <&pd IMX_SC_R_BOARD_R1>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_EXT_RGMII (LDO1)"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3"; + }; + + reg_module_3v3_avdd: regulator-module-3v3-avdd { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_AUDIO"; + }; + + reg_module_wifi: regulator-module-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pdn>; + gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "wifi_pwrdn_fake_regulator"; + regulator-settling-time-us = <100>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + reg_pcie_switch: regulator-pcie-switch { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio7>; + gpio = <&lsio_gpio3 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "pcie_switch"; + startup-delay-us = <100000>; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_en>; + /* Apalis USBH_EN */ + gpio = <&lsio_gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb-host-vbus"; + }; + + reg_usb_hsic: regulator-usb-hsic { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "usb-hsic-dummy"; + }; + + reg_usb_phy: regulator-usb-hsic1 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3000000>; + regulator-name = "usb-phy-dummy"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + decoder_boot: decoder-boot@84000000 { + reg = <0 0x84000000 0 0x2000000>; + no-map; + }; + + encoder1_boot: encoder1-boot@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + encoder2_boot: encoder2-boot@86200000 { + reg = <0 0x86200000 0 0x200000>; + no-map; + }; + + /* + * reserved-memory layout + * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4 + * Shouldn't be used at A core and Linux side. + * + */ + m4_reserved: m4@88000000 { + reg = <0 0x88000000 0 0x8000000>; + no-map; + }; + + rpmsg_reserved: rpmsg@90200000 { + reg = <0 0x90200000 0 0x200000>; + no-map; + }; + + vdevbuffer: vdevbuffer@90400000 { + compatible = "shared-dma-pool"; + reg = <0 0x90400000 0 0x100000>; + no-map; + }; + + decoder_rpc: decoder-rpc@92000000 { + reg = <0 0x92000000 0 0x200000>; + no-map; + }; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + + encoder1_rpc: encoder1-rpc@94400000 { + reg = <0 0x94400000 0 0x700000>; + no-map; + }; + + encoder2_rpc: encoder2-rpc@94b00000 { + reg = <0 0x94b00000 0 0x700000>; + no-map; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0xc0000000 0 0x3c000000>; + linux,cma-default; + reusable; + size = <0 0x3c000000>; + }; + }; + + /* TODO: Apalis Analogue Audio */ + + /* TODO: HDMI Audio */ + + /* TODO: Apalis SPDIF1 */ + + touchscreen: touchscreen { + compatible = "toradex,vf50-touchscreen"; + interrupt-parent = <&lsio_gpio3>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "idle", "default"; + pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>; + pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>; + io-channels = <&adc1 2>, <&adc1 1>, + <&adc1 0>, <&adc1 3>; + vf50-ts-min-pressure = <200>; + xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>; + xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>; + yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>; + ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>; + /* + * NOTE: you must remove the pinctrl-adc1 from the adc1 + * node below to use the touchscreen + */ + status = "disabled"; + }; + +}; + +&adc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0>; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; +}; + +/* TODO: Asynchronous Sample Rate Converter (ASRC) */ + +/* Apalis ETH1 */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <0>; + reset-assert-us = <2>; + reset-deassert-us = <2>; + reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>; + reset-names = "phy-reset"; + }; + }; +}; + +/* Apalis CAN1 */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* Apalis CAN2 */ +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +/* Apalis CAN3 (optional) */ +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; +}; + +/* TODO: Apalis HDMI1 */ + +/* On-module I2C */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + status = "okay"; + + /* TODO: Audio Codec */ + + /* USB3503A */ + usb-hub@8 { + compatible = "smsc,usb3503a"; + reg = <0x08>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3503a>; + connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>; + refclk-frequency = <25000000>; + reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>; + }; +}; + +/* Apalis I2C1 */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + atmel_mxt_ts: touch@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&lsio_gpio4>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* Apalis GPIO5 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>; + reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>; /* Apalis GPIO6 */ + status = "disabled"; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + status = "disabled"; + }; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; +}; + +&jpegdec { + status = "okay"; +}; + +&jpegenc { + status = "okay"; +}; + +/* TODO: Apalis LVDS1 */ + +/* Apalis SPI1 */ +&lpspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi0>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>; +}; + +/* Apalis SPI2 */ +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi2>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>; +}; + +/* Apalis UART3 */ +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Apalis UART1 */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; +}; + +/* Apalis UART4 */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Apalis UART2 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; +}; + +&lsio_gpio0 { + gpio-line-names = "MXM3_279", + "MXM3_277", + "MXM3_135", + "MXM3_203", + "MXM3_201", + "MXM3_275", + "MXM3_110", + "MXM3_120", + "MXM3_1/GPIO1", + "MXM3_3/GPIO2", + "MXM3_124", + "MXM3_122", + "MXM3_5/GPIO3", + "MXM3_7/GPIO4", + "", + "", + "MXM3_4", + "MXM3_211", + "MXM3_209", + "MXM3_2", + "MXM3_136", + "MXM3_134", + "MXM3_6", + "MXM3_8", + "MXM3_112", + "MXM3_118", + "MXM3_114", + "MXM3_116"; +}; + +&lsio_gpio1 { + gpio-line-names = "", + "", + "", + "", + "MXM3_286", + "", + "MXM3_87", + "MXM3_99", + "MXM3_138", + "MXM3_140", + "MXM3_239", + "", + "MXM3_281", + "MXM3_283", + "MXM3_126", + "MXM3_132", + "", + "", + "", + "", + "MXM3_173", + "MXM3_175", + "MXM3_123"; + + hdmi-ctrl-hog { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_ctrl>; + gpio-hog; + gpios = <30 GPIO_ACTIVE_HIGH>; + line-name = "CONNECTOR_IS_HDMI"; + /* Set signals depending on HDP device type, 0 DP, 1 HDMI */ + output-high; + }; +}; + +&lsio_gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "MXM3_198", + "MXM3_35", + "MXM3_164", + "", + "", + "", + "", + "MXM3_217", + "MXM3_215", + "", + "", + "MXM3_193", + "MXM3_194", + "MXM3_37", + "", + "MXM3_271", + "MXM3_273", + "MXM3_195", + "MXM3_197", + "MXM3_177", + "MXM3_179", + "MXM3_181", + "MXM3_183", + "MXM3_185", + "MXM3_187"; + + /* + * Add GPIO2_20 as a wakeup source: + * Pin: 101 SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO) + * Type: 5 SC_PAD_WAKEUP_FALL_EDGE + * Line: 20 + */ + pad-wakeup = <IMX8QM_SPI3_CS0 5 20>; + pad-wakeup-num = <1>; + + pcie-wifi-hog { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_wifi_refclk>; + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + line-name = "PCIE_WIFI_CLK"; + output-high; + }; +}; + +&lsio_gpio3 { + gpio-line-names = "MXM3_191", + "", + "MXM3_221", + "MXM3_225", + "MXM3_223", + "MXM3_227", + "MXM3_200", + "MXM3_235", + "MXM3_231", + "MXM3_229", + "MXM3_233", + "MXM3_204", + "MXM3_196", + "", + "MXM3_202", + "", + "", + "", + "MXM3_305", + "MXM3_307", + "MXM3_309", + "MXM3_311", + "MXM3_315", + "MXM3_317", + "MXM3_319", + "MXM3_321", + "MXM3_15/GPIO7", + "MXM3_63", + "MXM3_17/GPIO8", + "MXM3_12", + "MXM3_14", + "MXM3_16"; +}; + +&lsio_gpio4 { + gpio-line-names = "MXM3_18", + "MXM3_11/GPIO5", + "MXM3_13/GPIO6", + "MXM3_274", + "MXM3_84", + "MXM3_262", + "MXM3_96", + "", + "", + "", + "", + "", + "MXM3_190", + "", + "", + "", + "MXM3_269", + "MXM3_251", + "MXM3_253", + "MXM3_295", + "MXM3_299", + "MXM3_301", + "MXM3_297", + "MXM3_293", + "MXM3_291", + "MXM3_289", + "MXM3_287"; + + /* Enable pcie root / sata ref clock unconditionally */ + pcie-sata-hog { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_sata_refclk>; + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + line-name = "PCIE_SATA_CLK"; + output-high; + }; +}; + +&lsio_gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_150", + "MXM3_160", + "MXM3_162", + "MXM3_144", + "MXM3_146", + "MXM3_148", + "MXM3_152", + "MXM3_156", + "MXM3_158", + "MXM3_159", + "MXM3_184", + "MXM3_180", + "MXM3_186", + "MXM3_188", + "MXM3_176", + "MXM3_178"; +}; + +&lsio_gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_261", + "MXM3_263", + "MXM3_259", + "MXM3_257", + "MXM3_255", + "MXM3_128", + "MXM3_130", + "MXM3_265", + "MXM3_249", + "MXM3_247", + "MXM3_245", + "MXM3_243"; +}; + +/* Apalis PWM3, MXM3 pin 6 */ +&lsio_pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + #pwm-cells = <3>; +}; + +/* Apalis PWM4, MXM3 pin 8 */ +&lsio_pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; +}; + +/* Apalis PWM1, MXM3 pin 2 */ +&lsio_pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + #pwm-cells = <3>; +}; + +/* Apalis PWM2, MXM3 pin 4 */ +&lsio_pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + #pwm-cells = <3>; +}; + +/* Messaging Units */ +&mu_m0{ + status = "okay"; +}; + +&mu1_m0{ + status = "okay"; +}; + +&mu2_m0{ + status = "okay"; +}; + +/* TODO: Apalis PCIE1 */ + +/* TODO: On-module Wi-Fi */ + +/* TODO: Apalis BKL1_PWM */ + +/* TODO: Apalis DAP1 */ + +/* TODO: Analogue Audio */ + +/* TODO: Apalis SATA1 */ + +/* TODO: Apalis SPDIF1 */ + +/* TODO: Thermal Zones */ + +/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ + +/* TODO: Apalis USBH4 */ + +/* Apalis USBO1 */ +&usbphy1 { + phy-3p0-supply = <®_usb_phy>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + adp-disable; + hnp-disable; + over-current-active-low; + power-active-high; + srp-disable; +}; + +/* On-module eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2_4bit>, + <&pinctrl_usdhc2_8bit>, + <&pinctrl_mmc1_cd>; + pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, + <&pinctrl_usdhc2_8bit_100mhz>, + <&pinctrl_mmc1_cd>; + pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, + <&pinctrl_usdhc2_8bit_200mhz>, + <&pinctrl_mmc1_cd>; + pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, + <&pinctrl_usdhc2_8bit_sleep>, + <&pinctrl_mmc1_cd_sleep>; + bus-width = <8>; + cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */ + no-1-8-v; +}; + +/* Apalis SD1 */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */ + no-1-8-v; +}; + +/* Video Processing Unit */ +&vpu { + compatible = "nxp,imx8qm-vpu"; + status = "okay"; +}; + +&vpu_core0 { + reg = <0x2d080000 0x10000>; + memory-region = <&decoder_boot>, <&decoder_rpc>; + status = "okay"; +}; + +&vpu_core1 { + reg = <0x2d090000 0x10000>; + memory-region = <&encoder1_boot>, <&encoder1_rpc>; + status = "okay"; +}; + +&vpu_core2 { + reg = <0x2d0a0000 0x10000>; + memory-region = <&encoder2_boot>, <&encoder2_rpc>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>, + <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>, + <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>, + <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>, + <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>, + <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>, + <&pinctrl_usdhc1_gpios>; + + /* Apalis AN1_ADC */ + pinctrl_adc0: adc0grp { + fsl,pins = /* Apalis AN1_ADC0 */ + <IMX8QM_ADC_IN0_DMA_ADC0_IN0 0xc0000060>, + /* Apalis AN1_ADC1 */ + <IMX8QM_ADC_IN1_DMA_ADC0_IN1 0xc0000060>, + /* Apalis AN1_ADC2 */ + <IMX8QM_ADC_IN2_DMA_ADC0_IN2 0xc0000060>, + /* Apalis AN1_TSWIP_ADC3 */ + <IMX8QM_ADC_IN3_DMA_ADC0_IN3 0xc0000060>; + }; + + /* Apalis AN1_TS */ + pinctrl_adc1: adc1grp { + fsl,pins = /* Apalis AN1_TSPX */ + <IMX8QM_ADC_IN4_DMA_ADC1_IN0 0xc0000060>, + /* Apalis AN1_TSMX */ + <IMX8QM_ADC_IN5_DMA_ADC1_IN1 0xc0000060>, + /* Apalis AN1_TSPY */ + <IMX8QM_ADC_IN6_DMA_ADC1_IN2 0xc0000060>, + /* Apalis AN1_TSMY */ + <IMX8QM_ADC_IN7_DMA_ADC1_IN3 0xc0000060>; + }; + + /* Apalis CAM1 */ + pinctrl_cam1_gpios: cam1gpiosgrp { + fsl,pins = /* Apalis CAM1_D7 */ + <IMX8QM_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20 0x00000021>, + /* Apalis CAM1_D6 */ + <IMX8QM_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21 0x00000021>, + /* Apalis CAM1_D5 */ + <IMX8QM_ESAI0_TX0_LSIO_GPIO2_IO26 0x00000021>, + /* Apalis CAM1_D4 */ + <IMX8QM_ESAI0_TX1_LSIO_GPIO2_IO27 0x00000021>, + /* Apalis CAM1_D3 */ + <IMX8QM_ESAI0_TX2_RX3_LSIO_GPIO2_IO28 0x00000021>, + /* Apalis CAM1_D2 */ + <IMX8QM_ESAI0_TX3_RX2_LSIO_GPIO2_IO29 0x00000021>, + /* Apalis CAM1_D1 */ + <IMX8QM_ESAI0_TX4_RX1_LSIO_GPIO2_IO30 0x00000021>, + /* Apalis CAM1_D0 */ + <IMX8QM_ESAI0_TX5_RX0_LSIO_GPIO2_IO31 0x00000021>, + /* Apalis CAM1_PCLK */ + <IMX8QM_MCLK_IN0_LSIO_GPIO3_IO00 0x00000021>, + /* Apalis CAM1_MCLK */ + <IMX8QM_SPI3_SDO_LSIO_GPIO2_IO18 0x00000021>, + /* Apalis CAM1_VSYNC */ + <IMX8QM_ESAI0_SCKR_LSIO_GPIO2_IO24 0x00000021>, + /* Apalis CAM1_HSYNC */ + <IMX8QM_ESAI0_SCKT_LSIO_GPIO2_IO25 0x00000021>; + }; + + /* Apalis DAP1 */ + pinctrl_dap1_gpios: dap1gpiosgrp { + fsl,pins = /* Apalis DAP1_MCLK */ + <IMX8QM_SPI3_SDI_LSIO_GPIO2_IO19 0x00000021>, + /* Apalis DAP1_D_OUT */ + <IMX8QM_SAI1_RXC_LSIO_GPIO3_IO12 0x00000021>, + /* Apalis DAP1_RESET */ + <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07 0x00000021>, + /* Apalis DAP1_BIT_CLK */ + <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06 0x00000021>, + /* Apalis DAP1_D_IN */ + <IMX8QM_SAI1_RXFS_LSIO_GPIO3_IO14 0x00000021>, + /* Apalis DAP1_SYNC */ + <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11 0x00000021>, + /* On-module Wi-Fi_I2S_EN# */ + <IMX8QM_ESAI1_TX5_RX0_LSIO_GPIO2_IO13 0x00000021>; + }; + + /* Apalis LCD1_G1+2 */ + pinctrl_esai0_gpios: esai0gpiosgrp { + fsl,pins = /* Apalis LCD1_G1 */ + <IMX8QM_ESAI0_FSR_LSIO_GPIO2_IO22 0x00000021>, + /* Apalis LCD1_G2 */ + <IMX8QM_ESAI0_FST_LSIO_GPIO2_IO23 0x00000021>; + }; + + /* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */ + pinctrl_fec1: fec1grp { + fsl,pins = /* Use pads in 3.3V mode */ + <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020>, + <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>, + <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020>, + <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020>, + <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020>, + <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020>, + /* On-module ETH_RESET# */ + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, + /* On-module ETH_INT# */ + <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29 0x04000060>; + }; + + pinctrl_fec1_sleep: fec1-sleepgrp { + fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14 0x04000040>, + <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13 0x04000040>, + <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31 0x04000040>, + <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03 0x04000040>, + <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04 0x04000040>, + <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09 0x04000040>, + <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15 0x04000040>, + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, + <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29 0x04000040>; + }; + + /* Apalis LCD1_ */ + pinctrl_fec2_gpios: fec2gpiosgrp { + fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0>, + /* Apalis LCD1_R1 */ + <IMX8QM_ENET1_MDC_LSIO_GPIO4_IO18 0x00000021>, + /* Apalis LCD1_R0 */ + <IMX8QM_ENET1_MDIO_LSIO_GPIO4_IO17 0x00000021>, + /* Apalis LCD1_G0 */ + <IMX8QM_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16 0x00000021>, + /* Apalis LCD1_R7 */ + <IMX8QM_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17 0x00000021>, + /* Apalis LCD1_DE */ + <IMX8QM_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18 0x00000021>, + /* Apalis LCD1_HSYNC */ + <IMX8QM_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19 0x00000021>, + /* Apalis LCD1_VSYNC */ + <IMX8QM_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20 0x00000021>, + /* Apalis LCD1_PCLK */ + <IMX8QM_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21 0x00000021>, + /* Apalis LCD1_R6 */ + <IMX8QM_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11 0x00000021>, + /* Apalis LCD1_R5 */ + <IMX8QM_ENET1_RGMII_TXC_LSIO_GPIO6_IO10 0x00000021>, + /* Apalis LCD1_R4 */ + <IMX8QM_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12 0x00000021>, + /* Apalis LCD1_R3 */ + <IMX8QM_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13 0x00000021>, + /* Apalis LCD1_R2 */ + <IMX8QM_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14 0x00000021>; + }; + + /* Apalis CAN1 */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x00000021>, + <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x00000021>; + }; + + /* Apalis CAN2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x00000021>, + <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x00000021>; + }; + + /* Apalis CAN3 (optional) */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = <IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x00000021>, + <IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x00000021>; + }; + + /* Apalis GPIO1 */ + pinctrl_gpio1: gpio1grp { + fsl,pins = <IMX8QM_M40_GPIO0_00_LSIO_GPIO0_IO08 0x06000021>; + }; + + /* Apalis GPIO2 */ + pinctrl_gpio2: gpio2grp { + fsl,pins = <IMX8QM_M40_GPIO0_01_LSIO_GPIO0_IO09 0x06000021>; + }; + + /* Apalis GPIO3 */ + pinctrl_gpio3: gpio3grp { + fsl,pins = <IMX8QM_M41_GPIO0_00_LSIO_GPIO0_IO12 0x06000021>; + }; + + /* Apalis GPIO4 */ + pinctrl_gpio4: gpio4grp { + fsl,pins = <IMX8QM_M41_GPIO0_01_LSIO_GPIO0_IO13 0x06000021>; + }; + + /* Apalis GPIO5 */ + pinctrl_gpio5: gpio5grp { + fsl,pins = <IMX8QM_FLEXCAN2_RX_LSIO_GPIO4_IO01 0x06000021>; + }; + + /* Apalis GPIO6 */ + pinctrl_gpio6: gpio6grp { + fsl,pins = <IMX8QM_FLEXCAN2_TX_LSIO_GPIO4_IO02 0x00000021>; + }; + + /* Apalis GPIO7 */ + pinctrl_gpio7: gpio7grp { + fsl,pins = <IMX8QM_MLB_SIG_LSIO_GPIO3_IO26 0x00000021>; + }; + + /* Apalis GPIO8 */ + pinctrl_gpio8: gpio8grp { + fsl,pins = <IMX8QM_MLB_DATA_LSIO_GPIO3_IO28 0x00000021>; + }; + + /* Apalis BKL1_ON */ + pinctrl_gpio_bkl_on: gpiobklongrp { + fsl,pins = <IMX8QM_LVDS0_GPIO00_LSIO_GPIO1_IO04 0x00000021>; + }; + + /* Apalis WAKE1_MICO */ + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20 0x06700021>; + }; + + /* Apalis USBH_OC# */ + pinctrl_gpio_usbh_oc_n: gpiousbhocngrp { + fsl,pins = <IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06 0x04000021>; + }; + + /* On-module HDMI_CTRL */ + pinctrl_hdmi_ctrl: hdmictrlgrp { + fsl,pins = <IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 0x00000061>; + }; + + /* On-module I2C */ + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = <IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x04000020>, + <IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x04000020>; + }; + + /* Apalis I2C1 */ + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = <IMX8QM_GPT1_CLK_DMA_I2C2_SCL 0x04000020>, + <IMX8QM_GPT1_CAPTURE_DMA_I2C2_SDA 0x04000020>; + }; + + /* Apalis I2C3 (CAM) */ + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = <IMX8QM_SIM0_PD_DMA_I2C3_SCL 0x04000020>, + <IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA 0x04000020>; + }; + + /* Apalis SPI1 */ + pinctrl_lpspi0: lpspi0grp { + fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK 0x0600004c>, + <IMX8QM_SPI0_SDO_DMA_SPI0_SDO 0x0600004c>, + <IMX8QM_SPI0_SDI_DMA_SPI0_SDI 0x0600004c>, + <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05 0x0600004c>; + }; + + /* Apalis SPI2 */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK 0x0600004c>, + <IMX8QM_SPI2_SDO_DMA_SPI2_SDO 0x0600004c>, + <IMX8QM_SPI2_SDI_DMA_SPI2_SDI 0x0600004c>, + <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10 0x0600004c>; + }; + + /* Apalis UART3 */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020>, + <IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020>; + }; + + /* Apalis UART1 */ + pinctrl_lpuart1: lpuart1grp { + fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX 0x06000020>, + <IMX8QM_UART1_TX_DMA_UART1_TX 0x06000020>, + <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020>, + <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020>; + }; + + /* Apalis UART1 */ + pinctrl_lpuart1ctrl: lpuart1ctrlgrp { + fsl,pins = /* Apalis UART1_DTR */ + <IMX8QM_M40_I2C0_SCL_LSIO_GPIO0_IO06 0x00000021>, + /* Apalis UART1_DSR */ + <IMX8QM_M40_I2C0_SDA_LSIO_GPIO0_IO07 0x00000021>, + /* Apalis UART1_DCD */ + <IMX8QM_M41_I2C0_SCL_LSIO_GPIO0_IO10 0x00000021>, + /* Apalis UART1_RI */ + <IMX8QM_M41_I2C0_SDA_LSIO_GPIO0_IO11 0x00000021>; + }; + + /* Apalis UART4 */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX 0x06000020>, + <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX 0x06000020>; + }; + + /* Apalis UART2 */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = <IMX8QM_LVDS1_I2C1_SCL_DMA_UART3_TX 0x06000020>, + <IMX8QM_LVDS1_I2C1_SDA_DMA_UART3_RX 0x06000020>, + <IMX8QM_ENET1_RGMII_TXD3_DMA_UART3_RTS_B 0x06000020>, + <IMX8QM_ENET1_RGMII_RXC_DMA_UART3_CTS_B 0x06000020>; + }; + + /* Apalis TS_2 */ + pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpiogrp { + fsl,pins = <IMX8QM_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06 0x00000021>; + }; + + /* Apalis LCD1_G6+7 */ + pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp { + fsl,pins = /* Apalis LCD1_G6 */ + <IMX8QM_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12 0x00000021>, + /* Apalis LCD1_G7 */ + <IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13 0x00000021>; + }; + + /* Apalis TS_3 */ + pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp { + fsl,pins = <IMX8QM_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07 0x00000021>; + }; + + /* Apalis TS_4 */ + pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp { + fsl,pins = <IMX8QM_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22 0x00000021>; + }; + + /* Apalis TS_1 */ + pinctrl_mlb_gpios: mlbgpiosgrp { + fsl,pins = <IMX8QM_MLB_CLK_LSIO_GPIO3_IO27 0x00000021>; + }; + + /* Apalis MMC1_CD# */ + pinctrl_mmc1_cd: mmc1cdgrp { + fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09 0x00000021>; + }; + + pinctrl_mmc1_cd_sleep: mmc1cdsleepgrp { + fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09 0x04000021>; + }; + + /* On-module PCIe_Wi-Fi */ + pinctrl_pcieb: pciebgrp { + fsl,pins = <IMX8QM_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30 0x00000021>, + <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31 0x00000021>, + <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00 0x00000021>; + }; + + /* On-module PCIe_CLK_EN1 */ + pinctrl_pcie_sata_refclk: pciesatarefclkgrp { + fsl,pins = <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11 0x00000021>; + }; + + /* On-module PCIe_CLK_EN2 */ + pinctrl_pcie_wifi_refclk: pciewifirefclkgrp { + fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11 0x00000021>; + }; + + /* Apalis PWM3 */ + pinctrl_pwm0: pwm0grp { + fsl,pins = <IMX8QM_UART0_RTS_B_LSIO_PWM0_OUT 0x00000020>; + }; + + /* Apalis PWM4 */ + pinctrl_pwm1: pwm1grp { + fsl,pins = <IMX8QM_UART0_CTS_B_LSIO_PWM1_OUT 0x00000020>; + }; + + /* Apalis PWM1 */ + pinctrl_pwm2: pwm2grp { + fsl,pins = <IMX8QM_GPT1_COMPARE_LSIO_PWM2_OUT 0x00000020>; + }; + + /* Apalis PWM2 */ + pinctrl_pwm3: pwm3grp { + fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT 0x00000020>; + }; + + /* Apalis BKL1_PWM */ + pinctrl_pwm_bkl: pwmbklgrp { + fsl,pins = <IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020>; + }; + + /* Apalis LCD1_ */ + pinctrl_qspi1a_gpios: qspi1agpiosgrp { + fsl,pins = /* Apalis LCD1_B0 */ + <IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26 0x00000021>, + /* Apalis LCD1_B1 */ + <IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x00000021>, + /* Apalis LCD1_B2 */ + <IMX8QM_QSPI1A_DATA2_LSIO_GPIO4_IO24 0x00000021>, + /* Apalis LCD1_B3 */ + <IMX8QM_QSPI1A_DATA3_LSIO_GPIO4_IO23 0x00000021>, + /* Apalis LCD1_B5 */ + <IMX8QM_QSPI1A_DQS_LSIO_GPIO4_IO22 0x00000021>, + /* Apalis LCD1_B7 */ + <IMX8QM_QSPI1A_SCLK_LSIO_GPIO4_IO21 0x00000021>, + /* Apalis LCD1_B4 */ + <IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19 0x00000021>, + /* Apalis LCD1_B6 */ + <IMX8QM_QSPI1A_SS1_B_LSIO_GPIO4_IO20 0x00000021>; + }; + + /* On-module RESET_MOCI#_DRV */ + pinctrl_reset_moci: resetmocigrp { + fsl,pins = <IMX8QM_SCU_GPIO0_02_LSIO_GPIO0_IO30 0x00000021>; + }; + + /* On-module I2S SGTL5000 for Apalis Analogue Audio */ + pinctrl_sai1: sai1grp { + fsl,pins = <IMX8QM_SAI1_TXD_AUD_SAI1_TXD 0xc600006c>, + <IMX8QM_SAI1_RXD_AUD_SAI1_RXD 0xc600004c>, + <IMX8QM_SAI1_TXC_AUD_SAI1_TXC 0xc600004c>, + <IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS 0xc600004c>; + }; + + /* Apalis SATA1_ACT# */ + pinctrl_sata1_act: sata1actgrp { + fsl,pins = <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08 0x00000021>; + }; + + /* Apalis SD1_CD# */ + pinctrl_sd1_cd: sd1cdgrp { + fsl,pins = <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021>; + }; + + /* On-module I2S SGTL5000 SYS_MCLK */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0xc600004c>; + }; + + /* Apalis LCD1_ */ + pinctrl_sim0_gpios: sim0gpiosgrp { + fsl,pins = /* Apalis LCD1_G5 */ + <IMX8QM_SIM0_CLK_LSIO_GPIO0_IO00 0x00000021>, + /* Apalis LCD1_G3 */ + <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05 0x00000021>, + /* Apalis TS_5 */ + <IMX8QM_SIM0_IO_LSIO_GPIO0_IO02 0x00000021>, + /* Apalis LCD1_G4 */ + <IMX8QM_SIM0_RST_LSIO_GPIO0_IO01 0x00000021>; + }; + + /* Apalis SPDIF */ + pinctrl_spdif0: spdif0grp { + fsl,pins = <IMX8QM_SPDIF0_TX_AUD_SPDIF0_TX 0xc6000040>, + <IMX8QM_SPDIF0_RX_AUD_SPDIF0_RX 0xc6000040>; + }; + + pinctrl_touchctrl_gpios: touchctrlgpiosgrp { + fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04 0x00000021>, + <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05 0x00000041>, + <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17 0x00000021>, + <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21 0x00000041>; + }; + + pinctrl_touchctrl_idle: touchctrlidlegrp { + fsl,pins = <IMX8QM_ADC_IN4_LSIO_GPIO3_IO22 0x00000021>, + <IMX8QM_ADC_IN5_LSIO_GPIO3_IO23 0x00000021>, + <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24 0x00000021>, + <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25 0x00000021>; + }; + + /* On-module USB HSIC HUB (active) */ + pinctrl_usb_hsic_active: usbh1activegrp { + fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA 0x000000cf>, + <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE 0x000000ff>; + }; + + /* On-module USB HSIC HUB (idle) */ + pinctrl_usb_hsic_idle: usbh1idlegrp { + fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA 0x000000cf>, + <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE 0x000000cf>; + }; + + /* On-module USB HSIC HUB */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = /* On-module HSIC_HUB_CONNECT */ + <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x00000041>, + /* On-module HSIC_INT_N */ + <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01 0x00000021>, + /* On-module HSIC_RESET_N */ + <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02 0x00000041>; + }; + + /* Apalis USBH_EN */ + pinctrl_usbh_en: usbhengrp { + fsl,pins = <IMX8QM_USB_SS3_TC1_LSIO_GPIO4_IO04 0x00000021>; + }; + + /* Apalis USBO1 */ + pinctrl_usbotg1: usbotg1grp { + fsl,pins = /* Apalis USBO1_EN */ + <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021>, + /* Apalis USBO1_OC# */ + <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC 0x04000021>; + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021>, + <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021>, + <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021>, + <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021>, + <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021>, + <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021>, + <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021>, + <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021>, + <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021>, + <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041>, + <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040>, + <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020>, + <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020>, + <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020>, + <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020>, + <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020>, + <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020>, + <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020>, + <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020>, + <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020>, + <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040>, + <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040>, + <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020>, + <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020>, + <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020>, + <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020>, + <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020>, + <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020>, + <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020>, + <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020>, + <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020>, + <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040>, + <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020>; + }; + + /* Apalis TS_6 */ + pinctrl_usdhc1_gpios: usdhc1gpiosgrp { + fsl,pins = <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23 0x00000021>; + }; + + /* Apalis MMC1 */ + pinctrl_usdhc2_4bit: usdhc2grp4bitgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_8bit: usdhc2grp8bitgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000021>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000021>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000021>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000021>; + }; + + pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000020>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000020>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000020>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000020>; + }; + + pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000020>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000020>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000020>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000020>; + }; + + pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp { + fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x04000061>, + <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x04000061>, + <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x04000061>, + <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x04000061>, + <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x04000061>, + <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x04000061>, + /* On-module PMIC use */ + <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; + }; + + pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp { + fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x04000061>, + <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x04000061>, + <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x04000061>, + <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x04000061>; + }; + + /* Apalis SD1 */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, + <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, + <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, + <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, + <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, + <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, + <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, + <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, + <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, + <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, + <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, + <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, + <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, + <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, + <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, + <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, + /* On-module PMIC use */ + <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; + }; + + /* On-module Wi-Fi */ + pinctrl_wifi: wifigrp { + fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */ + <IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x06000021>, + /* On-module Wi-Fi_PCIE_W_DISABLE */ + <IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24 0x06000021>; + }; + + pinctrl_wifi_pdn: wifipdngrp { + fsl,pins = /* On-module Wi-Fi_POWER_DOWN */ + <IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 0x06000021>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index 4852760adeee..b32c2e199c16 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -138,6 +138,53 @@ conn_subsys: bus@5b000000 { status = "disabled"; }; + usbotg3: usb@5b110000 { + compatible = "fsl,imx8qm-usb3"; + reg = <0x5b110000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, + <&usb3_lpcg IMX_LPCG_CLK_0>, + <&usb3_lpcg IMX_LPCG_CLK_7>, + <&usb3_lpcg IMX_LPCG_CLK_4>, + <&usb3_lpcg IMX_LPCG_CLK_5>; + clock-names = "lpm", "bus", "aclk", "ipg", "core"; + assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + assigned-clock-rates = <250000000>; + power-domains = <&pd IMX_SC_R_USB_2>; + status = "disabled"; + + usbotg3_cdns3: usb@5b120000 { + compatible = "cdns,usb3"; + reg = <0x5b130000 0x10000>, /* memory area for HOST registers */ + <0x5b140000 0x10000>, /* memory area for DEVICE registers */ + <0x5b120000 0x10000>; /* memory area for OTG/DRD registers */ + reg-names = "xhci", "dev", "otg"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg", "wakeup"; + phys = <&usb3_phy>; + phy-names = "cdns3,usb3-phy"; + status = "disabled"; + }; + }; + + usb3_phy: usb-phy@5b160000 { + compatible = "nxp,salvo-phy"; + reg = <0x5b160000 0x40000>; + clocks = <&usb3_lpcg IMX_LPCG_CLK_6>; + clock-names = "salvo_phy_clk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + /* LPCG clocks */ sdhc0_lpcg: clock-controller@5b200000 { compatible = "fsl,imx8qxp-lpcg"; @@ -234,4 +281,26 @@ conn_subsys: bus@5b000000 { clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk"; power-domains = <&pd IMX_SC_R_USB_0_PHY>; }; + + usb3_lpcg: clock-controller@5b280000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b280000 0x10000>; + #clock-cells = <1>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; + clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&conn_ipg_clk>, + <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; + clock-output-names = "usb3_app_clk", + "usb3_lpm_clk", + "usb3_ipg_clk", + "usb3_core_pclk", + "usb3_phy_clk", + "usb3_aclk"; + power-domains = <&pd IMX_SC_R_USB_2_PHY>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index a943a1e2797f..2dce8f2ee3ea 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -31,7 +31,7 @@ dma_subsys: bus@5a000000 { <&spi0_lpcg 1>; clock-names = "per", "ipg"; assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>; - assigned-clock-rates = <20000000>; + assigned-clock-rates = <60000000>; power-domains = <&pd IMX_SC_R_SPI_0>; status = "disabled"; }; @@ -270,6 +270,7 @@ dma_subsys: bus@5a000000 { adc0: adc@5a880000 { compatible = "nxp,imx8qxp-adc"; + #io-channel-cells = <1>; reg = <0x5a880000 0x10000>; interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; @@ -284,6 +285,7 @@ dma_subsys: bus@5a000000 { adc1: adc@5a890000 { compatible = "nxp,imx8qxp-adc"; + #io-channel-cells = <1>; reg = <0x5a890000 0x10000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; @@ -296,6 +298,65 @@ dma_subsys: bus@5a000000 { status = "disabled"; }; + flexcan1: can@5a8d0000 { + compatible = "fsl,imx8qm-flexcan"; + reg = <0x5a8d0000 0x10000>; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&can0_lpcg 1>, + <&can0_lpcg 0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <40000000>; + power-domains = <&pd IMX_SC_R_CAN_0>; + /* SLSlice[4] */ + fsl,clk-source = /bits/ 8 <0>; + fsl,scu-index = /bits/ 8 <0>; + status = "disabled"; + }; + + flexcan2: can@5a8e0000 { + compatible = "fsl,imx8qm-flexcan"; + reg = <0x5a8e0000 0x10000>; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + /* CAN0 clock and PD is shared among all CAN instances as + * CAN1 shares CAN0's clock and to enable CAN0's clock it + * has to be powered on. + */ + clocks = <&can0_lpcg 1>, + <&can0_lpcg 0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <40000000>; + power-domains = <&pd IMX_SC_R_CAN_1>; + /* SLSlice[4] */ + fsl,clk-source = /bits/ 8 <0>; + fsl,scu-index = /bits/ 8 <1>; + status = "disabled"; + }; + + flexcan3: can@5a8f0000 { + compatible = "fsl,imx8qm-flexcan"; + reg = <0x5a8f0000 0x10000>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + /* CAN0 clock and PD is shared among all CAN instances as + * CAN2 shares CAN0's clock and to enable CAN0's clock it + * has to be powered on. + */ + clocks = <&can0_lpcg 1>, + <&can0_lpcg 0>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <40000000>; + power-domains = <&pd IMX_SC_R_CAN_2>; + /* SLSlice[4] */ + fsl,clk-source = /bits/ 8 <0>; + fsl,scu-index = /bits/ 8 <2>; + status = "disabled"; + }; + i2c0_lpcg: clock-controller@5ac00000 { compatible = "fsl,imx8qxp-lpcg"; reg = <0x5ac00000 0x10000>; @@ -367,4 +428,17 @@ dma_subsys: bus@5a000000 { "adc1_lpcg_ipg_clk"; power-domains = <&pd IMX_SC_R_ADC_1>; }; + + can0_lpcg: clock-controller@5acd0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5acd0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>, <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "can0_lpcg_pe_clk", + "can0_lpcg_ipg_clk", + "can0_lpcg_chi_clk"; + power-domains = <&pd IMX_SC_R_CAN_0>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi index 06b94bbc2b97..ea8c93757521 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi @@ -28,6 +28,54 @@ lsio_subsys: bus@5d000000 { clock-output-names = "lsio_bus_clk"; }; + lsio_pwm0: pwm@5d000000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d000000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm0_lpcg 4>, + <&pwm0_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + lsio_pwm1: pwm@5d010000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d010000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm1_lpcg 4>, + <&pwm1_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + lsio_pwm2: pwm@5d020000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d020000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm2_lpcg 4>, + <&pwm2_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + + lsio_pwm3: pwm@5d030000 { + compatible = "fsl,imx27-pwm"; + reg = <0x5d030000 0x10000>; + clock-names = "ipg", "per"; + clocks = <&pwm3_lpcg 4>, + <&pwm3_lpcg 1>; + assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <24000000>; + #pwm-cells = <2>; + status = "disabled"; + }; + lsio_gpio0: gpio@5d080000 { reg = <0x5d080000 0x10000>; interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 852420349c01..f542476187b3 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -277,7 +277,7 @@ }; &thermal_zones { - pmic-thermal0 { + pmic-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi index 214f21bd0cb4..70fadd79851a 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi @@ -130,8 +130,6 @@ clk: clock-controller { compatible = "fsl,imx8dxl-clk", "fsl,scu-clk"; #clock-cells = <2>; - clocks = <&xtal32k &xtal24m>; - clock-names = "xtal_32KHz", "xtal_24Mhz"; }; scu_gpio: gpio { @@ -188,7 +186,7 @@ }; thermal_zones: thermal-zones { - cpu-thermal0 { + cpu-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts index 6c079c0a3a48..010e836ebe5c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts @@ -28,7 +28,7 @@ }; &iomuxc { - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096 MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi index 3d859a350bd5..4e9e58acd262 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi @@ -124,7 +124,7 @@ >; }; - pinctrl_ecspi1_cs: ecspi1-cs { + pinctrl_ecspi1_cs: ecspi1cs-grp { fsl,pins = < MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40000 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40000 @@ -215,7 +215,7 @@ >; }; - pinctrl_pmic: pmic-irq { + pinctrl_pmic: pmicirq-grp { fsl,pins = < MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x41 >; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts index 266129b4a70d..03e7679217b2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts @@ -168,6 +168,12 @@ "", "ECSPI1_SS0"; }; +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + /* PCIe */ &pcie0 { assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, @@ -333,6 +339,13 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c2 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2 + >; + }; + pinctrl_leds: leds1grp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts index 9fbbbb556c0b..1eb1fe7ebde8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts @@ -264,7 +264,7 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 @@ -280,7 +280,7 @@ >; }; - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 31f4548f85cf..ba06b5273b91 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -1119,6 +1119,61 @@ #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, + <&clk IMX8MM_CLK_DISP_AXI>, + <&clk IMX8MM_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, + <&clk IMX8MM_SYS_PLL2_1000M>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + compatible = "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, + <&clk IMX8MM_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + csi: csi@32e20000 { compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; reg = <0x32e20000 0x1000>; @@ -1315,6 +1370,30 @@ status = "disabled"; }; + pcie0_ep: pcie-ep@33800000 { + compatible = "fsl,imx8mm-pcie-ep"; + reg = <0x33800000 0x400000>, + <0x18000000 0x8000000>; + reg-names = "dbi", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + fsl,max-link-speed = <2>; + clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, + <&clk IMX8MM_CLK_PCIE1_PHY>, + <&clk IMX8MM_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gpu_3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi index c11895d9d582..8e100e71b8d2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi @@ -341,7 +341,7 @@ >; }; - pinctrl_pmic: pmicirq { + pinctrl_pmic: pmicirqgrp { fsl,pins = < MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x040 >; @@ -381,7 +381,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x094 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d4 @@ -392,7 +392,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x096 MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts index 33f98582eace..7acc5a960dd9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts @@ -26,7 +26,7 @@ }; &iomuxc { - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096 MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts index fbbb3367037b..c6ad65becc97 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts @@ -136,7 +136,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000094 MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d4 @@ -152,7 +152,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000096 MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d6 diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 8fef980c4ab2..1443857bfa5f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -389,7 +389,7 @@ >; }; - pinctrl_i2c2_gpio: i2c2grp-gpio { + pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x1c3 MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x1c3 @@ -403,7 +403,7 @@ >; }; - pinctrl_i2c3_gpio: i2c3grp-gpio { + pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1c3 MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1c3 diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 9e0ddd6b7a32..c94ab45ee96c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -1062,6 +1062,61 @@ #size-cells = <1>; ranges; + lcdif: lcdif@32e00000 { + compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif"; + reg = <0x32e00000 0x10000>; + clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MN_CLK_DISP_PIXEL>, + <&clk IMX8MN_SYS_PLL2_1000M>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>; + status = "disabled"; + + port { + lcdif_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif>; + }; + }; + }; + + mipi_dsi: dsi@32e10000 { + compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + reg = <0x32e10000 0x400>; + clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, + <&clk IMX8MN_CLK_24M>; + assigned-clock-rates = <266000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif: endpoint { + remote-endpoint = <&lcdif_to_dsim>; + }; + }; + }; + }; + disp_blk_ctrl: blk-ctrl@32e28000 { compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; reg = <0x32e28000 0x100>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts new file mode 100644 index 000000000000..13674dc64be9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts @@ -0,0 +1,977 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include <dt-bindings/net/qca-ar803x.h> +#include "imx8mp.dtsi" + +/ { + model = "Data Modul i.MX8M Plus eDM SBC"; + compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp"; + + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + /* There are 1/2/4 GiB options, adjusted by bootloader. */ + reg = <0x0 0x40000000 0 0x40000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_backlight>; + brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>; + default-brightness-level = <7>; + enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + pwms = <&pwm1 0 5000000 0>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + clk_xtal25: clock-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + panel: panel { + /* Compatible string is filled in by panel board DT Overlay. */ + backlight = <&backlight>; + power-supply = <®_panel_vcc>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_panel_vcc: regulator-panel-vcc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_vcc_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "PANEL_VCC"; + /* GPIO flags are ignored, enable-active-high applies. */ + gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VDD_3V3_SD"; + /* GPIO flags are ignored, enable-active-high applies. */ + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */ + enable-active-high; + off-on-delay-us = <12000>; + startup-delay-us = <100>; + vin-supply = <&buck4>; + }; + + watchdog { /* TPS3813 */ + compatible = "linux,wdt-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_watchdog_gpio>; + always-running; + gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + hw_algo = "level"; + /* Reset triggers in 2..3 seconds */ + hw_margin_ms = <1500>; + /* Disabled by default */ + status = "disabled"; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + flash@0 { /* W25Q128JVEI */ + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; /* Up to 133 MHz */ + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +}; + +&ecspi2 { /* Feature connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless feature board plugged in. */ + status = "disabled"; +}; + +&ecspi3 { /* Display connector SPI */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +&eqos { /* First ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-handle = <&phy_eqos>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8031 PHY */ + phy_eqos: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + /* + * Dedicated ENET_WOL# signal is unused, the PHY + * can wake the SoC up via INT signal as well. + */ + interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + qca,keep-pll-enabled; + vddio-supply = <&vddio_eqos>; + + vddio_eqos: vddio-regulator { + regulator-name = "VDDIO_EQOS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh_eqos: vddh-regulator { + regulator-name = "VDDH_EQOS"; + }; + }; + }; +}; + +&fec { /* Second ethernet */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-handle = <&phy_fec>; + phy-mode = "rgmii-id"; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8031 PHY */ + phy_fec: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + /* + * Dedicated ENET_WOL# signal is unused, the PHY + * can wake the SoC up via INT signal as well. + */ + interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + qca,keep-pll-enabled; + vddio-supply = <&vddio_fec>; + + vddio_fec: vddio-regulator { + regulator-name = "VDDIO_FEC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddh_fec: vddh-regulator { + regulator-name = "VDDH_FEC"; + }; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&gpio1 { + gpio-line-names = + "", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#", + "", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03", + "GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#", + "", "", "", "ENET_RST#", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "ENET2_INT#", "", "", "", "", "", + "WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#", + "", "", "", "", + "", "", "", "SD2_RESET#", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "", + "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8", + "CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "", + "", "", "EEPROM_WP_1V8#", "", "", "", "", "", + "MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", + "", "M2_W_DISABLE1_1V8#", + "M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3", + "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#", + "", "DIS_USB_DN1", "DIS_USB_DN2", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "WDOG_EN", "", "", + "", "SPI1_CS#", "", "", + "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3", + "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3", + "", "", "", "", + "", "SPI3_CS#", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + usb-hub@2c { + compatible = "microchip,usb2514bi"; + reg = <0x2c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_hub>; + individual-port-switching; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + self-powered; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "st,m41t62"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>; + }; + + pcieclk: clk@6a { + compatible = "renesas,9fgv0241"; + reg = <0x6a>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic: pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + /* + * i.MX 8M Plus Data Sheet for Consumer Products + * 3.1.4 Operating ranges + * MIMX8ML8CVNKZAB + */ + regulators { + buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */ + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck2: BUCK2 { /* VDD_ARM */ + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-ramp-delay = <3125>; + regulator-always-on; + regulator-boot-on; + }; + + buck4: BUCK4 { /* VDD_3V3 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5: BUCK5 { /* VDD_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6: BUCK6 { /* NVCC_DRAM_1V1 */ + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1: LDO1 { /* NVCC_SNVS_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3: LDO3 { /* VDDA_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4: LDO4 { /* PMIC_LDO4 */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5: LDO5 { /* NVCC_SD2 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&i2c5 { /* HDMI EDID bus */ + clock-frequency = <100000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c5>; + pinctrl-1 = <&pinctrl_i2c5_gpio>; + scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel_pwm>; + /* Disabled by default, unless display board plugged in. */ + status = "disabled"; +}; + +/* SD slot */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <&buck4>; + vqmmc-supply = <&buck5>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&uart1 { /* RS485 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "disabled"; /* Optional */ +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { /* A53 Debug */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_0 { + fsl,over-current-active-low; + status = "okay"; +}; + +&usb_dwc3_0 { /* Lower plug direct */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { /* Upper plug via HUB */ + dr_mode = "host"; + status = "okay"; +}; + +&wdog1 { + status = "okay"; +}; + +/* IOMUXC node should be at the end of DT to improve readability. */ +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>, + <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>, + <&pinctrl_panel_expansion>; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_ecspi3: ecspi3-grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x44 + MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x44 + MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x44 + MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x40 + >; + }; + + pinctrl_eqos: eqos-grp { + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + /* ENET_RST# */ + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x6 + /* ENET_INT# */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000090 + >; + }; + + pinctrl_fec: fec-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + /* ENET2_RST# */ + MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x6 + /* ENET2_INT# */ + MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x40000090 + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_hog_feature: hog-feature-grp { + fsl,pins = < + /* GPIO5_IO03 */ + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x40000006 + /* GPIO5_IO04 */ + MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x40000006 + + /* CAN_INT# */ + MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x40000090 + >; + }; + + pinctrl_hog_panel: hog-panel-grp { + fsl,pins = < + /* GRAPHICS_GPIO0_1V8 */ + MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x26 + >; + }; + + pinctrl_hog_misc: hog-misc-grp { + fsl,pins = < + /* ENET_WOL# -- shared by both PHYs */ + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x40000090 + + /* PG_V_IN_VAR# */ + MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x40000000 + /* CSI2_PD_1V8 */ + MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x0 + /* CSI2_RESET_1V8# */ + MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x0 + + /* DIS_USB_DN1 */ + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0 + /* DIS_USB_DN2 */ + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x0 + + /* EEPROM_WP_1V8# */ + MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x100 + /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */ + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x0 + /* GRAPHICS_PRSNT_1V8# */ + MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000000 + + /* CLK_CCM_CLKO1_3V3 */ + MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x10 + >; + }; + + pinctrl_hog_sbc: hog-sbc-grp { + fsl,pins = < + /* MEMCFG[0..2] straps */ + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x40000140 + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x40000140 + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x40000140 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x40000084 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x40000084 + >; + }; + + pinctrl_i2c1_gpio: i2c1-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x84 + MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x84 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x40000084 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x40000084 + >; + }; + + pinctrl_i2c2_gpio: i2c2-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x84 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x84 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 + >; + }; + + pinctrl_i2c3_gpio: i2c3-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 + MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 + >; + }; + + pinctrl_i2c5: i2c5-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084 + MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084 + >; + }; + + pinctrl_i2c5_gpio: i2c5-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84 + MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84 + >; + }; + + pinctrl_panel_backlight: panel-backlight-grp { + fsl,pins = < + /* BL_ENABLE_1V8 */ + MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x104 + >; + }; + + pinctrl_panel_expansion: panel-expansion-grp { + fsl,pins = < + /* DSI_RESET_1V8# */ + MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x2 + /* DSI_IRQ_1V8# */ + MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000090 + >; + }; + + pinctrl_panel_pwm: panel-pwm-grp { + fsl,pins = < + /* BL_PWM_3V3 */ + MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT 0x12 + >; + }; + + pinctrl_panel_vcc_reg: panel-vcc-grp { + fsl,pins = < + /* TFT_ENABLE_1V8 */ + MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x104 + >; + }; + + pinctrl_pcie0: pcie-grp { + fsl,pins = < + /* M2_PCIE_RST# */ + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 + /* M2_W_DISABLE1_1V8# */ + MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x2 + /* M2_W_DISABLE2_1V8# */ + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x2 + /* CLK_M2_32K768 */ + MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x14 + /* M2_PCIE_WAKE# */ + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x40000140 + /* M2_PCIE_CLKREQ# */ + MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 + >; + }; + + pinctrl_pdm: pdm-grp { + fsl,pins = < + /* PDM_SEL */ + MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x0 + MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK 0x0 + MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00 0x0 + >; + }; + + pinctrl_pmic: pmic-grp { + fsl,pins = < + /* PMIC_nINT */ + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090 + >; + }; + + pinctrl_rtc: rtc-grp { + fsl,pins = < + /* RTC_IRQ# */ + MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000090 + >; + }; + + pinctrl_sai1: sai1-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0xd6 + MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0xd6 + >; + }; + + pinctrl_sai2: sai2-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 + >; + }; + + pinctrl_sai3: sai3-grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x49 + MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x49 + MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS 0x49 + MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49 + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x49 + MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x49 + MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49 + MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49 + >; + }; + + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49 + MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpio-grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141 + >; + }; + + pinctrl_usb_hub: usb-hub-grp { + fsl,pins = < + /* USBHUB_RESET# */ + MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x4 + >; + }; + + pinctrl_usb1: usb1-grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x6 + MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x80 + >; + }; + + pinctrl_watchdog_gpio: watchdog-gpio-grp { + fsl,pins = < + /* WDOG_B# */ + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x26 + /* WDOG_EN -- ungate WDT RESET# signal propagation */ + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x6 + /* WDOG_KICK# / WDI */ + MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x26 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 2876d18f2a38..b4409349eb3f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -43,6 +43,17 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_usb_hub: regulator-usb-hub { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usb_hub>; + regulator-name = "USB_HUB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &A53_0 { @@ -254,6 +265,41 @@ status = "okay"; }; +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb_dwc3_1 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + dr_mode = "host"; + status = "okay"; + + /* 2.x hub on port 1 */ + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + vdd-supply = <®_usb_hub>; + peer-hub = <&usb_hub_3_x>; + }; + + /* 3.x hub on port 2 */ + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + vdd-supply = <®_usb_hub>; + peer-hub = <&usb_hub_2_x>; + }; +}; + /* SD Card */ &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -384,6 +430,12 @@ >; }; + pinctrl_reg_usb_hub: regusbhubgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x19 + >; + }; + pinctrl_rtc_int: rtcintgrp { fsl,pins = < MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140 @@ -411,6 +463,13 @@ >; }; + pinctrl_usb1: usb1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10 + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index 382fbedaf6ba..92df6c1277c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -104,20 +104,10 @@ }; }; -/* - * PDK2 carrier board uses SoM with KSZ9131 populated and connected to - * SoM EQoS ethernet RGMII interface. Remove the other SoM PHY DT node. - */ -/delete-node/ ðphy0f; - -/* - * PDK2 carrier board has KSZ9021 PHY populated and connected to SoM FEC - * ethernet RGMII interface. The SoM is not populated with second FEC PHY. - */ -/delete-node/ ðphy1f; - &fec { /* Second ethernet */ + pinctrl-0 = <&pinctrl_fec_rgmii>; phy-handle = <ðphypdk>; + phy-mode = "rgmii"; mdio { ethphypdk: ethernet-phy@7 { /* KSZ 9021 */ @@ -151,6 +141,20 @@ status = "okay"; }; +&pcie_phy { + clock-names = "ref"; + clocks = <&clk IMX8MP_SYS_PLL2_100M>; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_UNUSED>; + status = "okay"; +}; + +&pcie { + fsl,max-link-speed = <1>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; /* GPIO J */ + status = "okay"; +}; + &usb3_1 { fsl,over-current-active-low; }; @@ -159,7 +163,7 @@ /* * GPIO_A,B,C,D are connected to buttons. * GPIO_E,F,H,I are connected to LEDs. - * GPIO_M is connected to CLKOUT2. + * GPIO_M is connected to CLKOUT1. */ pinctrl-0 = <&pinctrl_hog_base &pinctrl_dhcom_g &pinctrl_dhcom_j diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts new file mode 100644 index 000000000000..b5e76b992a10 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marek Vasut <marex@denx.de> + * + * DHCOM iMX8MP variant: + * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2 + * DHCOM PCB number: 660-100 or newer + * PDK3 PCB number: 669-100 or newer + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include "imx8mp-dhcom-som.dtsi" + +/ { + model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)"; + compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som", + "fsl,imx8mp"; + + chosen { + stdout-path = &uart1; + }; + + clk_pcie: clock-pcie { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_c_0_hs_ep: endpoint { + remote-endpoint = <&dwc3_0_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + + usb_c_0_ss_ep: endpoint { + remote-endpoint = <&ptn5150_in_ep>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */ + label = "TA1-GPIO-A"; + linux,code = <KEY_A>; + pinctrl-0 = <&pinctrl_dhcom_a>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-1 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */ + label = "TA2-GPIO-B"; + linux,code = <KEY_B>; + pinctrl-0 = <&pinctrl_dhcom_b>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-2 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */ + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + pinctrl-0 = <&pinctrl_dhcom_c>; + pinctrl-names = "default"; + wakeup-source; + }; + + button-3 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */ + label = "TA4-GPIO-E"; + linux,code = <KEY_E>; + pinctrl-0 = <&pinctrl_dhcom_e>; + pinctrl-names = "default"; + wakeup-source; + }; + }; + + led { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; + gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */ + pinctrl-0 = <&pinctrl_dhcom_d>; + pinctrl-names = "default"; + }; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ + pinctrl-0 = <&pinctrl_dhcom_f>; + pinctrl-names = "default"; + }; + + led-2 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */ + pinctrl-0 = <&pinctrl_dhcom_g>; + pinctrl-names = "default"; + }; + + led-3 { + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ + pinctrl-0 = <&pinctrl_dhcom_i>; + pinctrl-names = "default"; + }; + }; + + reg_avdd: regulator-avdd { /* AUDIO_VDD */ + compatible = "regulator-fixed"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "AUDIO_VDD"; + }; +}; + +&i2c5 { + i2c-mux@70 { + compatible = "nxp,pca9540"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2cmuxed0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + typec@3d { + compatible = "nxp,ptn5150"; + reg = <0x3d>; + interrupt-parent = <&gpio4>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ptn5150>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ptn5150_in_ep: endpoint { + remote-endpoint = <&usb_c_0_ss_ep>; + }; + }; + + port@1 { + reg = <1>; + + ptn5150_out_ep: endpoint { + remote-endpoint = <&dwc3_0_ss_ep>; + }; + }; + }; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <20000>; /* 0.02 R */ + ti,shunt-gain = <1>; /* Drop cca. 40mV */ + }; + + eeprom_board: eeprom@54 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x54>; + }; + }; + + i2cmuxed1: i2c@1 { /* HDMI DDC I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; +}; + +ðphy0g { + reg = <7>; +}; + +&fec { /* Second ethernet */ + pinctrl-0 = <&pinctrl_fec_rgmii>; + phy-handle = <ðphypdk>; + phy-mode = "rgmii-id"; + + mdio { + ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */ + compatible = "ethernet-phy-id0022.1642", + "ethernet-phy-ieee802.3-c22"; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pinctrl_ethphy1>; + pinctrl-names = "default"; + reg = <7>; + reset-assert-us = <1000>; + /* RESET_N signal rise time ~100ms */ + reset-deassert-us = <120000>; + reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&flexcan1 { + status = "okay"; +}; + +&pcie_phy { + clocks = <&clk_pcie>; + clock-names = "ref"; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + status = "okay"; +}; + +&pcie { + fsl,max-link-speed = <3>; + reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usb_dwc3_0 { + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + + dwc3_0_hs_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&usb_c_0_hs_ep>; + }; + + dwc3_0_ss_ep: endpoint@1 { + reg = <1>; + remote-endpoint = <&ptn5150_out_ep>; + }; + }; +}; + +&usb3_1 { + fsl,disable-port-power-control; + fsl,permanently-attached; +}; + +&usb_dwc3_1 { + /* This port has USB5734 Hub connected to it, PWR/OC pins are unused */ + /delete-property/ pinctrl-names; + /delete-property/ pinctrl-0; +}; + +&iomuxc { + /* + * GPIO_A,B,C,E are connected to buttons. + * GPIO_D,F,G,I are connected to LEDs. + * GPIO_H is connected to USB Hub RESET_N. + * GPIO_M is connected to CLKOUT2. + */ + pinctrl-0 = <&pinctrl_hog_base + &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k + &pinctrl_dhcom_l + &pinctrl_dhcom_int>; + + pinctrl_ptn5150: ptn5150grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40000000 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 9cdd4234c4ca..7e804f650784 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -83,7 +83,7 @@ &eqos { /* First ethernet */ pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eqos>; + pinctrl-0 = <&pinctrl_eqos_rgmii>; phy-handle = <ðphy0g>; phy-mode = "rgmii-id"; status = "okay"; @@ -94,14 +94,14 @@ #size-cells = <0>; /* Up to one of these two PHYs may be populated. */ - ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ + ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */ compatible = "ethernet-phy-id0007.c110", "ethernet-phy-ieee802.3-c22"; interrupt-parent = <&gpio3>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>; pinctrl-names = "default"; - reg = <1>; + reg = <0>; reset-assert-us = <1000>; reset-deassert-us = <1000>; reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; @@ -129,9 +129,9 @@ &fec { /* Second ethernet */ pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; + pinctrl-0 = <&pinctrl_fec_rmii>; phy-handle = <ðphy1f>; - phy-mode = "rgmii"; + phy-mode = "rmii"; fsl,magic-packet; status = "okay"; @@ -547,7 +547,7 @@ &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l - /* GPIO_M is connected to CLKOUT2 */ + /* GPIO_M is connected to CLKOUT1 */ &pinctrl_dhcom_int>; pinctrl-names = "default"; @@ -673,7 +673,7 @@ >; }; - pinctrl_eqos: dhcom-eqos-grp { /* RGMII */ + pinctrl_eqos_rgmii: dhcom-eqos-rgmii-grp { /* RGMII */ fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 @@ -692,6 +692,22 @@ >; }; + pinctrl_eqos_rmii: dhcom-eqos-rmii-grp { /* RMII */ + fsl,pins = < + MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 + MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER 0x1f + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + /* Clock */ + MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x4000001f + >; + }; + pinctrl_enet_vio: dhcom-enet-vio-grp { fsl,pins = < MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22 @@ -700,9 +716,9 @@ pinctrl_ethphy0: dhcom-ethphy0-grp { fsl,pins = < - /* ENET1_#RST Reset */ + /* ENET_QOS_#RST Reset */ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22 - /* ENET1_#INT Interrupt */ + /* ENET_QOS_#INT Interrupt */ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22 >; }; @@ -716,7 +732,7 @@ >; }; - pinctrl_fec: dhcom-fec-grp { + pinctrl_fec_rgmii: dhcom-fec-rgmii-grp { /* RGMII */ fsl,pins = < MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 @@ -737,6 +753,22 @@ >; }; + pinctrl_fec_rmii: dhcom-fec-rmii-grp { /* RMII */ + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + /* Clock */ + MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x4000001f + >; + }; + pinctrl_flexcan1: dhcom-flexcan1-grp { fsl,pins = < MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 3fa6cca9a043..d8fb29e7e148 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -80,12 +80,14 @@ label = "S12"; linux,code = <BTN_0>; gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + wakeup-source; }; switch-2 { label = "S13"; linux,code = <BTN_1>; gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi index 80db1ad7c230..56b0e4b865c9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi @@ -67,7 +67,14 @@ /* TODO: Audio Codec */ }; -/* TODO: Verdin PCIE_1 */ +/* Verdin PCIE_1 */ +&pcie { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; /* Verdin PWM_1 */ &pwm1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi index c29622529200..bdfdd4c782f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi @@ -91,7 +91,14 @@ /* TODO: Audio Codec */ }; -/* TODO: Verdin PCIE_1 */ +/* Verdin PCIE_1 */ +&pcie { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; /* Verdin PWM_1 */ &pwm1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi index 36289c175e6e..ef94f9a57e20 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi @@ -65,6 +65,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_bt_uart>; status = "okay"; + + bluetooth { + compatible = "mrvl,88w8997"; + max-speed = <921600>; + }; }; /* On-module Wi-Fi */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi index bd7b31cc3760..db1722f0d80e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi @@ -87,7 +87,7 @@ status = "okay"; }; -/* EEPROM on Verdin yavia board */ +/* EEPROM on Verdin Yavia board */ &eeprom_carrier_board { status = "okay"; }; @@ -122,7 +122,7 @@ status = "okay"; }; -&pcie_phy{ +&pcie_phy { status = "okay"; }; @@ -183,7 +183,6 @@ }; &usb_dwc3_1 { - disable-over-current; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index 1608775da0ad..e9e4fcb562f1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -748,7 +748,20 @@ }; }; -/* TODO: Verdin PCIE_1 */ +/* Verdin PCIE_1 */ +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + /* PCIE_1_RESET# (SODIMM 244) */ + reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; +}; + +&pcie_phy { + clocks = <&hsio_blk_ctrl>; + clock-names = "ref"; + fsl,clkreq-unsupported; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>; +}; /* Verdin PWM_1 */ &pwm1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index a237275ee017..f81391993354 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -409,6 +409,30 @@ status = "disabled"; }; + gpt1: timer@302d0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@302e0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>; + clock-names = "ipg", "per"; + }; + + gpt3: timer@302f0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>; + clock-names = "ipg", "per"; + }; + iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mp-iomuxc"; reg = <0x30330000 0x10000>; @@ -722,6 +746,30 @@ clocks = <&osc_24m>; clock-names = "per"; }; + + gpt6: timer@306e0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x306e0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>; + clock-names = "ipg", "per"; + }; + + gpt5: timer@306f0000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x306f0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>; + clock-names = "ipg", "per"; + }; + + gpt4: timer@30700000 { + compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; + reg = <0x30700000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>; + clock-names = "ipg", "per"; + }; }; aips3: bus@30800000 { @@ -1126,6 +1174,61 @@ #size-cells = <1>; ranges; + mipi_dsi: dsi@32e60000 { + compatible = "fsl,imx8mp-mipi-dsim"; + reg = <0x32e60000 0x400>; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_CLK_24M>; + assigned-clock-rates = <200000000>, <24000000>; + samsung,pll-clock-frequency = <24000000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsim_from_lcdif1: endpoint { + remote-endpoint = <&lcdif1_to_dsim>; + }; + }; + }; + }; + + lcdif1: display-controller@32e80000 { + compatible = "fsl,imx8mp-lcdif"; + reg = <0x32e80000 0x10000>; + clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI>, + <&clk IMX8MP_CLK_MEDIA_APB>; + assigned-clock-parents = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, + <&clk IMX8MP_SYS_PLL2_1000M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <594000000>, <500000000>, <200000000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>; + status = "disabled"; + + port { + lcdif1_to_dsim: endpoint { + remote-endpoint = <&dsim_from_lcdif1>; + }; + }; + }; + lcdif2: display-controller@32e90000 { compatible = "fsl,imx8mp-lcdif"; reg = <0x32e90000 0x10000>; @@ -1151,7 +1254,7 @@ media_blk_ctrl: blk-ctrl@32ec0000 { compatible = "fsl,imx8mp-media-blk-ctrl", - "simple-bus", "syscon"; + "syscon"; reg = <0x32ec0000 0x10000>; #address-cells = <1>; #size-cells = <1>; @@ -1202,10 +1305,10 @@ lvds_bridge: bridge@5c { compatible = "fsl,imx8mp-ldb"; - clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; - clock-names = "ldb"; reg = <0x5c 0x4>, <0x128 0x4>; reg-names = "ldb", "lvds"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; status = "disabled"; @@ -1309,6 +1412,32 @@ status = "disabled"; }; + pcie_ep: pcie-ep@33800000 { + compatible = "fsl,imx8mp-pcie-ep"; + reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>; + reg-names = "dbi", "addr_space"; + clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, + <&clk IMX8MP_CLK_HSIO_AXI>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "pcie", "pcie_bus", "pcie_aux"; + assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; + assigned-clock-rates = <10000000>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; + num-lanes = <1>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */ + interrupt-names = "dma"; + fsl,max-link-speed = <3>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gpu3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 7605802f294d..ce7ce2ba855c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -667,7 +667,7 @@ >; }; - pinctrl_spkamp: spkamp { + pinctrl_spkamp: spkampgrp { fsl,pins = < MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3 0x81 /* MUTE */ >; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts index 73bd431cbd6a..2b3d437a642a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts @@ -12,18 +12,16 @@ compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq"; }; -&bq25895 { - ti,battery-regulation-voltage = <4192000>; /* uV */ - ti,charge-current = <1600000>; /* uA */ - ti,termination-current = <66000>; /* uA */ -}; - &accel_gyro { mount-matrix = "1", "0", "0", "0", "-1", "0", "0", "0", "1"; }; +&bq25895 { + ti,charge-current = <1600000>; /* uA */ +}; + &proximity { - proximity-near-level = <120>; + proximity-near-level = <50>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts index 4533a84fb0b9..077c5cd2586f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts @@ -7,7 +7,7 @@ &a53_opp_table { opp-1000000000 { - opp-microvolt = <1000000>; + opp-microvolt = <950000>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi index e4f8b47cce4f..7fd0176e4bd3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi @@ -22,9 +22,7 @@ }; &bq25895 { - ti,battery-regulation-voltage = <4200000>; /* uV */ ti,charge-current = <1500000>; /* uA */ - ti,termination-current = <144000>; /* uA */ }; &camera_front { @@ -40,6 +38,12 @@ }; }; +&magnetometer { + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "-1"; +}; + &proximity { - proximity-near-level = <25>; + proximity-near-level = <10>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts index 1056b7981bdb..97577c0a7715 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts @@ -23,5 +23,5 @@ }; &proximity { - proximity-near-level = <10>; + proximity-near-level = <5>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 6895bcc12165..38732579d13e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -20,6 +20,8 @@ backlight_dsi: backlight-dsi { compatible = "led-backlight"; leds = <&led_backlight>; + brightness-levels = <255>; + default-brightness-level = <190>; }; pmic_osc: clock-pmic { @@ -84,13 +86,21 @@ compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audiopwr>; - regulator-name = "AUDIO_PWR_EN"; + regulator-name = "AUD_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; + reg_mic_2v4: regulator-mic-2v4 { + compatible = "regulator-fixed"; + regulator-name = "MIC_2V4"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2400000>; + vin-supply = <®_aud_1v8>; + }; + /* * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC * since we can't have it twice in the 2 different regulator nodes. @@ -319,6 +329,10 @@ opp-hz = /bits/ 64 <100000000>; }; + opp-166000000 { + opp-hz = /bits/ 64 <166935483>; + }; + opp-800000000 { opp-hz = /bits/ 64 <800000000>; }; @@ -371,6 +385,16 @@ }; &iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* CLKO2 for cameras on both CSI1 and CSI2 */ + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f + >; + }; + pinctrl_audiopwr: audiopwrgrp { fsl,pins = < /* AUDIO_POWER_EN_3V3 */ @@ -662,7 +686,7 @@ >; }; - pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd @@ -679,7 +703,7 @@ >; }; - pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf @@ -709,7 +733,7 @@ >; }; - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d @@ -722,7 +746,7 @@ >; }; - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80 MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f @@ -758,7 +782,7 @@ }; &i2c1 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; @@ -806,6 +830,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>; clocks = <&pmic_osc>; + #clock-cells = <0>; clock-names = "osc"; clock-output-names = "pmic_clk"; interrupt-parent = <&gpio1>; @@ -819,9 +844,9 @@ regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <900000>; - rohm,dvs-idle-voltage = <850000>; - rohm,dvs-suspend-voltage = <800000>; + rohm,dvs-run-voltage = <880000>; + rohm,dvs-idle-voltage = <820000>; + rohm,dvs-suspend-voltage = <810000>; regulator-always-on; }; @@ -831,8 +856,8 @@ regulator-max-microvolt = <1300000>; regulator-boot-on; regulator-ramp-delay = <1250>; - rohm,dvs-run-voltage = <1000000>; - rohm,dvs-idle-voltage = <900000>; + rohm,dvs-run-voltage = <950000>; + rohm,dvs-idle-voltage = <850000>; regulator-always-on; }; @@ -841,14 +866,14 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; - rohm,dvs-run-voltage = <900000>; + rohm,dvs-run-voltage = <850000>; }; buck4_reg: BUCK4 { regulator-name = "buck4"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; - rohm,dvs-run-voltage = <1000000>; + rohm,dvs-run-voltage = <930000>; }; buck5_reg: BUCK5 { @@ -956,12 +981,12 @@ }; &i2c2 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; - magnetometer@1e { + magnetometer: magnetometer@1e { compatible = "st,lsm9ds1-magn"; reg = <0x1e>; pinctrl-names = "default"; @@ -1005,7 +1030,7 @@ }; &i2c3 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; @@ -1023,7 +1048,7 @@ DBVDD-supply = <®_aud_1v8>; AVDD-supply = <®_aud_1v8>; CPVDD-supply = <®_aud_1v8>; - MICVDD-supply = <®_aud_1v8>; + MICVDD-supply = <®_mic_2v4>; PLLVDD-supply = <®_aud_1v8>; SPKVDD1-supply = <®_vsys_3v4>; SPKVDD2-supply = <®_vsys_3v4>; @@ -1095,7 +1120,7 @@ }; &i2c4 { - clock-frequency = <387000>; + clock-frequency = <384000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; @@ -1127,7 +1152,9 @@ interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; phys = <&usb3_phy0>; - ti,precharge-current = <130000>; /* uA */ + ti,battery-regulation-voltage = <4208000>; /* uV */ + ti,termination-current = <128000>; /* uA */ + ti,precharge-current = <128000>; /* uA */ ti,minimum-sys-voltage = <3700000>; /* uV */ ti,boost-voltage = <5000000>; /* uV */ ti,boost-max-current = <1500000>; /* uA */ @@ -1143,6 +1170,7 @@ }; &mipi_csi1 { + assigned-clock-rates = <266000000>, <200000000>, <66000000>; status = "okay"; ports { @@ -1299,7 +1327,6 @@ #address-cells = <1>; #size-cells = <0>; dr_mode = "otg"; - snps,dis_u3_susphy_quirk; usb-role-switch; status = "okay"; @@ -1366,7 +1393,7 @@ mmc-pwrseq = <&usdhc2_pwrseq>; post-power-on-delay-ms = <1000>; cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - max-frequency = <50000000>; + max-frequency = <100000000>; disable-wp; cap-sdio-irq; keep-power-in-suspend; @@ -1380,3 +1407,13 @@ fsl,ext-reset-output; status = "okay"; }; + +&a53_opp_table { + opp-1000000000 { + opp-microvolt = <850000>; + }; + + opp-1500000000 { + opp-microvolt = <950000>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index 344cfdaeb1d5..c5244b608524 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -169,8 +169,6 @@ hnp-disable; srp-disable; adp-disable; - /* OC not supported due to non matching active polarity */ - disable-over-current; dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 98fbba4c99a9..cd925c0ac911 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -940,6 +940,8 @@ clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, <&clk IMX8MQ_CLK_UART1_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -951,6 +953,8 @@ clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, <&clk IMX8MQ_CLK_UART3_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -962,6 +966,8 @@ clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, <&clk IMX8MQ_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1157,6 +1163,8 @@ clocks = <&clk IMX8MQ_CLK_UART4_ROOT>, <&clk IMX8MQ_CLK_UART4_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1605,6 +1613,38 @@ status = "disabled"; }; + pcie1_ep: pcie-ep@33c00000 { + compatible = "fsl,imx8mq-pcie-ep"; + reg = <0x33c00000 0x000400000>, + <0x20000000 0x08000000>; + reg-names = "dbi", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + fsl,max-link-speed = <2>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts new file mode 100644 index 000000000000..5ab0921eb599 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis.dtsi" +#include "imx8-apalis-eval.dtsi" + +/ { + model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board"; + compatible = "toradex,apalis-imx8-eval", + "toradex,apalis-imx8", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts new file mode 100644 index 000000000000..68ce58dc7102 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis.dtsi" +#include "imx8-apalis-ixora-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM/QP on Apalis Ixora V1.1 Carrier Board"; + compatible = "toradex,apalis-imx8-ixora-v1.1", + "toradex,apalis-imx8", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts new file mode 100644 index 000000000000..c8ff75831556 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-eval.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board"; + compatible = "toradex,apalis-imx8-v1.1-eval", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts new file mode 100644 index 000000000000..ad7f644968fa --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-ixora-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.1 Carrier Board"; + compatible = "toradex,apalis-imx8-v1.1-ixora-v1.1", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts new file mode 100644 index 000000000000..3b2e8c93b846 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +/dts-v1/; + +#include "imx8qm-apalis-v1.1.dtsi" +#include "imx8-apalis-ixora-v1.2.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.2 Carrier Board"; + compatible = "toradex,apalis-imx8-v1.1-ixora-v1.2", + "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi new file mode 100644 index 000000000000..81ba8b2831ac --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include <dt-bindings/pwm/pwm.h> +#include "imx8qm.dtsi" +#include "imx8-apalis-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM V1.1"; + compatible = "toradex,apalis-imx8-v1.1", + "fsl,imx8qm"; +}; + +/* TODO: Cooling Maps */ diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi new file mode 100644 index 000000000000..1c6af9f549a8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2022 Toradex + */ + +#include "imx8qm-apalis-v1.1.dtsi" + +/ { + model = "Toradex Apalis iMX8QM"; + compatible = "toradex,apalis-imx8", + "fsl,imx8qm"; +}; + +ðphy0 { + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; +}; + +/* + * Apalis iMX8QM V1.0 has PHY KSZ9031. the Micrel PHY driver + * doesn't support setting internal PHY delay for TXC line for + * this PHY model. Use delay on MAC side instead. + */ +&fec1 { + fsl,rgmii_txc_dly; + phy-mode = "rgmii-rxid"; +}; + +/* TODO: Apalis HDMI1 */ + +/* Apalis I2C2 (DDC) */ +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; +}; + +&lsio_gpio0 { + gpio-line-names = "MXM3_279", + "MXM3_277", + "MXM3_135", + "MXM3_203", + "MXM3_201", + "MXM3_275", + "MXM3_110", + "MXM3_120", + "MXM3_1/GPIO1", + "MXM3_3/GPIO2", + "MXM3_124", + "MXM3_122", + "MXM3_5/GPIO3", + "MXM3_7/GPIO4", + "", + "", + "MXM3_4", + "MXM3_211", + "MXM3_209", + "MXM3_2", + "MXM3_136", + "MXM3_134", + "MXM3_6", + "MXM3_8", + "MXM3_112", + "MXM3_118", + "MXM3_114", + "MXM3_116"; +}; + +&lsio_gpio1 { + gpio-line-names = "", + "", + "", + "", + "MXM3_286", + "", + "MXM3_87", + "MXM3_99", + "MXM3_138", + "MXM3_140", + "MXM3_239", + "", + "MXM3_281", + "MXM3_283", + "MXM3_126", + "MXM3_132", + "", + "", + "", + "", + "MXM3_173", + "MXM3_175", + "MXM3_123"; +}; + +&lsio_gpio2 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "MXM3_198", + "MXM3_35", + "MXM3_164", + "", + "", + "", + "", + "MXM3_217", + "MXM3_215", + "", + "", + "MXM3_193", + "MXM3_194", + "MXM3_37", + "", + "MXM3_271", + "MXM3_273", + "MXM3_195", + "MXM3_197", + "MXM3_177", + "MXM3_179", + "MXM3_181", + "MXM3_183", + "MXM3_185", + "MXM3_187"; +}; + +&lsio_gpio3 { + gpio-line-names = "MXM3_191", + "", + "MXM3_221", + "MXM3_225", + "MXM3_223", + "MXM3_227", + "MXM3_200", + "MXM3_235", + "MXM3_231", + "MXM3_229", + "MXM3_233", + "MXM3_204", + "MXM3_196", + "", + "MXM3_202", + "", + "", + "", + "MXM3_305", + "MXM3_307", + "MXM3_309", + "MXM3_311", + "MXM3_315", + "MXM3_317", + "MXM3_319", + "MXM3_321", + "MXM3_15/GPIO7", + "MXM3_63", + "MXM3_17/GPIO8", + "MXM3_12", + "MXM3_14", + "MXM3_16"; +}; + +&lsio_gpio4 { + gpio-line-names = "MXM3_18", + "MXM3_11/GPIO5", + "MXM3_13/GPIO6", + "MXM3_274", + "MXM3_84", + "MXM3_262", + "MXM3_96", + "", + "", + "", + "", + "", + "MXM3_190", + "", + "", + "", + "MXM3_269", + "MXM3_251", + "MXM3_253", + "MXM3_295", + "MXM3_299", + "MXM3_301", + "MXM3_297", + "MXM3_293", + "MXM3_291", + "MXM3_289", + "MXM3_287"; + + /* Enable pcie root / sata ref clock unconditionally */ + pcie-sata-hog { + gpios = <27 GPIO_ACTIVE_HIGH>; + }; + +}; + +&lsio_gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_150", + "MXM3_160", + "MXM3_162", + "MXM3_144", + "MXM3_146", + "MXM3_148", + "MXM3_152", + "MXM3_156", + "MXM3_158", + "MXM3_159", + "MXM3_184", + "MXM3_180", + "MXM3_186", + "MXM3_188", + "MXM3_176", + "MXM3_178"; +}; + +&lsio_gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "MXM3_261", + "MXM3_263", + "MXM3_259", + "MXM3_257", + "MXM3_255", + "MXM3_128", + "MXM3_130", + "MXM3_265", + "MXM3_249", + "MXM3_247", + "MXM3_245", + "MXM3_243"; +}; + +&pinctrl_fec1 { + fsl,pins = + /* Use pads in 1.8V mode */ + <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020>, + <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>, + <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020>, + <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020>, + <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020>, + <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020>, + <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020>, + /* On-module ETH_RESET# */ + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, + /* On-module ETH_INT# */ + <IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05 0x04000060>; +}; + +&pinctrl_fec1_sleep { + fsl,pins = + <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, + <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14 0x04000040>, + <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13 0x04000040>, + <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31 0x04000040>, + <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02 0x04000040>, + <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03 0x04000040>, + <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04 0x04000040>, + <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08 0x04000040>, + <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09 0x04000040>, + <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15 0x04000040>, + <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x04000040>, + <IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05 0x04000040>; +}; + +&iomuxc { + /* Apalis I2C2 (DDC) */ + pinctrl_lpi2c0: lpi2c0grp { + fsl,pins = + <IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x04000022>, + <IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x04000022>; + }; +}; + +/* On-module PCIe_CTRL0_CLKREQ */ +&pinctrl_pcie_sata_refclk { + fsl,pins = + <IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27 0x00000021>; +}; + +/* TODO: On-module Wi-Fi */ + +/* Apalis MMC1 */ +&usdhc2 { + /* + * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates + * issues with certain SD cards, disable 1.8V signaling for now. + */ + no-1-8-v; +}; + +/* Apalis SD1 */ +&usdhc3 { + /* + * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates + * issues with certain SD cards, disable 1.8V signaling for now. + */ + no-1-8-v; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index bbe5f5ecfb92..e9b198c13b2f 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -16,6 +16,50 @@ "uart4_lpcg_ipg_clk"; power-domains = <&pd IMX_SC_R_UART_4>; }; + + can1_lpcg: clock-controller@5ace0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5ace0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>, <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "can1_lpcg_pe_clk", + "can1_lpcg_ipg_clk", + "can1_lpcg_chi_clk"; + power-domains = <&pd IMX_SC_R_CAN_1>; + }; + + can2_lpcg: clock-controller@5acf0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5acf0000 0x10000>; + #clock-cells = <1>; + clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>, + <&dma_ipg_clk>, <&dma_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; + clock-output-names = "can2_lpcg_pe_clk", + "can2_lpcg_ipg_clk", + "can2_lpcg_chi_clk"; + power-domains = <&pd IMX_SC_R_CAN_2>; + }; +}; + +&flexcan1 { + fsl,clk-source = /bits/ 8 <1>; +}; + +&flexcan2 { + clocks = <&can1_lpcg 1>, + <&can1_lpcg 0>; + assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>; + fsl,clk-source = /bits/ 8 <1>; +}; + +&flexcan3 { + clocks = <&can2_lpcg 1>, + <&can2_lpcg 0>; + assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>; + fsl,clk-source = /bits/ 8 <1>; }; &lpuart0 { diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 41ce8336f29e..9fff867709f0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -23,6 +23,9 @@ serial1 = &lpuart1; serial2 = &lpuart2; serial3 = &lpuart3; + vpu_core0 = &vpu_core0; + vpu_core1 = &vpu_core1; + vpu_core2 = &vpu_core2; }; cpus { @@ -212,6 +215,7 @@ }; /* sorted in register address */ + #include "imx8-ss-vpu.dtsi" #include "imx8-ss-img.dtsi" #include "imx8-ss-dma.dtsi" #include "imx8-ss-conn.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts new file mode 100644 index 000000000000..966ecfb2a17e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8x-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP on Aster Board"; + compatible = "toradex,colibri-imx8x-aster", + "toradex,colibri-imx8x", + "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts index 6b21a295c126..fe4597a6f7e0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2019 Toradex */ @@ -6,10 +6,10 @@ /dts-v1/; #include "imx8qxp-colibri.dtsi" -#include "imx8qxp-colibri-eval-v3.dtsi" +#include "imx8x-colibri-eval-v3.dtsi" / { - model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3"; + model = "Toradex Colibri iMX8QXP on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx8x-eval-v3", "toradex,colibri-imx8x", "fsl,imx8qxp"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi deleted file mode 100644 index 7c334b93db3b..000000000000 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2019 Toradex - */ - -#include <dt-bindings/input/linux-event-codes.h> - -/ { - aliases { - rtc0 = &rtc_i2c; - rtc1 = &rtc; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiokeys>; - - key-wakeup { - label = "Wake-Up"; - gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; -}; - -&i2c1 { - status = "okay"; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* Colibri UART_B */ -&lpuart0 { - status = "okay"; -}; - -/* Colibri UART_C */ -&lpuart2 { - status = "okay"; -}; - -/* Colibri UART_A */ -&lpuart3 { - status = "okay"; -}; - -/* Colibri FastEthernet */ -&fec1 { - status = "okay"; -}; - -/* Colibri SD/MMC Card */ -&usdhc2 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts new file mode 100644 index 000000000000..cca33213fa9b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8x-colibri-iris-v2.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP on Colibri Iris V2 Board"; + compatible = "toradex,colibri-imx8x-iris-v2", + "toradex,colibri-imx8x", + "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts new file mode 100644 index 000000000000..fed75b5d4a1c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8x-colibri-iris.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP on Colibri Iris Board"; + compatible = "toradex,colibri-imx8x-iris", + "toradex,colibri-imx8x", + "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi index 89d70e030433..0f1aa31dd3e5 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -1,598 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright 2019 Toradex */ #include "imx8qxp.dtsi" +#include "imx8x-colibri.dtsi" / { - model = "Toradex Colibri iMX8QXP/DX Module"; + model = "Toradex Colibri iMX8QXP Module"; compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; - - chosen { - stdout-path = &lpuart3; - }; - - reg_module_3v3: regulator-module-3v3 { - compatible = "regulator-fixed"; - regulator-name = "+V3.3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -/* On-module I2C */ -&i2c0 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; - status = "okay"; - - /* Touch controller */ - touchscreen@2c { - compatible = "adi,ad7879-1"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ad7879_int>; - reg = <0x2c>; - interrupt-parent = <&lsio_gpio3>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - touchscreen-max-pressure = <4096>; - adi,resistance-plate-x = <120>; - adi,first-conversion-delay = /bits/ 8 <3>; - adi,acquisition-time = /bits/ 8 <1>; - adi,median-filter-size = /bits/ 8 <2>; - adi,averaging = /bits/ 8 <1>; - adi,conversion-interval = /bits/ 8 <255>; - }; -}; - -/* Colibri I2C */ -&i2c1 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; -}; - -/* Colibri UART_B */ -&lpuart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart0>; -}; - -/* Colibri UART_C */ -&lpuart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart2>; -}; - -/* Colibri UART_A */ -&lpuart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; -}; - -/* Colibri FastEthernet */ -&fec1 { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_fec1>; - pinctrl-1 = <&pinctrl_fec1_sleep>; - phy-mode = "rmii"; - phy-handle = <ðphy0>; - fsl,magic-packet; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c22"; - max-speed = <100>; - reg = <2>; - }; - }; -}; - -/* On-module eMMC */ -&usdhc1 { - bus-width = <8>; - non-removable; - no-sd; - no-sdio; - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc1>; - pinctrl-1 = <&pinctrl_usdhc1_100mhz>; - pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - status = "okay"; -}; - -/* Colibri SD/MMC Card */ -&usdhc2 { - bus-width = <4>; - cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_module_3v3>; - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; - disable-wp; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>; - - /* On-module touch pen-down interrupt */ - pinctrl_ad7879_int: ad7879intgrp { - fsl,pins = < - IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21 - >; - }; - - /* Colibri Analogue Inputs */ - pinctrl_adc0: adc0grp { - fsl,pins = < - IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60 /* SODIMM 8 */ - IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60 /* SODIMM 6 */ - IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60 /* SODIMM 4 */ - IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60 /* SODIMM 2 */ - >; - }; - - pinctrl_can_int: canintgrp { - fsl,pins = < - IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 73 */ - >; - }; - - pinctrl_csi_ctl: csictlgrp { - fsl,pins = < - IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20 /* SODIMM 77 */ - IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20 /* SODIMM 89 */ - >; - }; - - pinctrl_ext_io0: extio0grp { - fsl,pins = < - IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040 /* SODIMM 135 */ - >; - }; - - /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ - pinctrl_fec1: fec1grp { - fsl,pins = < - IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 - IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 - IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 - IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 - IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 - IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 - IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 - IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 - IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 - IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61 - >; - }; - - pinctrl_fec1_sleep: fec1slpgrp { - fsl,pins = < - IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041 - IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041 - IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41 - IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41 - IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41 - IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41 - IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41 - IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41 - IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41 - IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41 - >; - }; - - /* Colibri optional CAN on UART_B RTS/CTS */ - pinctrl_flexcan1: flexcan0grp { - fsl,pins = < - IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 /* SODIMM 32 */ - IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 /* SODIMM 34 */ - >; - }; - - /* Colibri optional CAN on PS2 */ - pinctrl_flexcan2: flexcan1grp { - fsl,pins = < - IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 /* SODIMM 55 */ - IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 /* SODIMM 63 */ - >; - }; - - /* Colibri optional CAN on UART_A TXD/RXD */ - pinctrl_flexcan3: flexcan2grp { - fsl,pins = < - IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21 /* SODIMM 35 */ - IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21 /* SODIMM 33 */ - >; - }; - - /* Colibri LCD Back-Light GPIO */ - pinctrl_gpio_bl_on: gpioblongrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60 /* SODIMM 71 */ - >; - }; - - pinctrl_gpiokeys: gpiokeysgrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041 /* SODIMM 45 */ - >; - }; - - pinctrl_hog0: hog0grp { - fsl,pins = < - IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* SODIMM 65 */ - IMX8QXP_CSI_D07_CI_PI_D09 0x61 /* SODIMM 65 */ - IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20 /* SODIMM 69 */ - IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20 /* SODIMM 79 */ - IMX8QXP_CSI_D02_CI_PI_D04 0x61 /* SODIMM 79 */ - IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* SODIMM 85 */ - IMX8QXP_CSI_D06_CI_PI_D08 0x61 /* SODIMM 85 */ - IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20 /* SODIMM 95 */ - IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20 /* SODIMM 97 */ - IMX8QXP_CSI_D03_CI_PI_D05 0x61 /* SODIMM 97 */ - IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20 /* SODIMM 99 */ - IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20 /* SODIMM 101 */ - IMX8QXP_CSI_D00_CI_PI_D02 0x61 /* SODIMM 101 */ - IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20 /* SODIMM 103 */ - IMX8QXP_CSI_D01_CI_PI_D03 0x61 /* SODIMM 103 */ - IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20 /* SODIMM 105 */ - IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x20 /* SODIMM 107 */ - IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20 /* SODIMM 127 */ - IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20 /* SODIMM 131 */ - IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20 /* SODIMM 133 */ - IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20 /* SODIMM 96 */ - IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20 /* SODIMM 98 */ - IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20 /* SODIMM 100 */ - IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20 /* SODIMM 102 */ - IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20 /* SODIMM 104 */ - IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x20 /* SODIMM 106 */ - >; - }; - - pinctrl_hog1: hog1grp { - fsl,pins = < - IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20 /* SODIMM 75 */ - IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20 /* SODIMM 93 */ - >; - }; - - /* - * This pin is used in the SCFW as a UART. Using it from - * Linux would require rewritting the SCFW board file. - */ - pinctrl_hog_scfw: hogscfwgrp { - fsl,pins = < - IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20 /* SODIMM 144 */ - >; - }; - - /* On Module I2C */ - pinctrl_i2c0: i2c0grp { - fsl,pins = < - IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021 - IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021 - >; - }; - - /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ - pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { - fsl,pins = < - IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 /* SODIMM 140 */ - IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 /* SODIMM 142 */ - >; - }; - - /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ - pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { - fsl,pins = < - IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 /* SODIMM 186 */ - IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 /* SODIMM 188 */ - >; - }; - - /* Colibri I2C */ - pinctrl_i2c1: i2c1grp { - fsl,pins = < - IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 /* SODIMM 196 */ - IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 /* SODIMM 194 */ - >; - }; - - /* Colibri Parallel RGB LCD Interface */ - pinctrl_lcdif: lcdifgrp { - fsl,pins = < - IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60 /* SODIMM 56 */ - IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60 /* SODIMM 68 */ - IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60 /* SODIMM 82 */ - IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x60 /* SODIMM 44 */ - IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x60 /* SODIMM 44 */ - IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60 /* SODIMM 76 */ - IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60 /* SODIMM 76 */ - IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60 /* SODIMM 70 */ - IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60 /* SODIMM 60 */ - IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60 /* SODIMM 58 */ - IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60 /* SODIMM 78 */ - IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60 /* SODIMM 72 */ - IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60 /* SODIMM 80 */ - IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60 /* SODIMM 46 */ - IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60 /* SODIMM 62 */ - IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60 /* SODIMM 48 */ - IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60 /* SODIMM 74 */ - IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60 /* SODIMM 50 */ - IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60 /* SODIMM 52 */ - IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60 /* SODIMM 54 */ - IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60 /* SODIMM 66 */ - IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60 /* SODIMM 64 */ - IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60 /* SODIMM 57 */ - IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60 /* SODIMM 57 */ - IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60 /* SODIMM 61 */ - >; - }; - - /* Colibri SPI */ - pinctrl_lpspi2: lpspi2grp { - fsl,pins = < - IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21 /* SODIMM 86 */ - IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040 /* SODIMM 92 */ - IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040 /* SODIMM 90 */ - IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040 /* SODIMM 88 */ - >; - }; - - /* Colibri UART_B */ - pinctrl_lpuart0: lpuart0grp { - fsl,pins = < - IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 /* SODIMM 36 */ - IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 /* SODIMM 38 */ - IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 /* SODIMM 34 */ - IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 /* SODIMM 32 */ - >; - }; - - /* Colibri UART_C */ - pinctrl_lpuart2: lpuart2grp { - fsl,pins = < - IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 /* SODIMM 19 */ - IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 /* SODIMM 21 */ - >; - }; - - /* Colibri UART_A */ - pinctrl_lpuart3: lpuart3grp { - fsl,pins = < - IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 /* SODIMM 33 */ - IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 /* SODIMM 35 */ - >; - }; - - /* Colibri UART_A Control */ - pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { - fsl,pins = < - IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20 /* SODIMM 23 */ - IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20 /* SODIMM 25 */ - IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20 /* SODIMM 27 */ - IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20 /* SODIMM 29 */ - IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20 /* SODIMM 31 */ - IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20 /* SODIMM 37 */ - >; - }; - - /* On module wifi module */ - pinctrl_pcieb: pciebgrp { - fsl,pins = < - IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061 /* SODIMM 178 */ - IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061 /* SODIMM 94 */ - IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60 /* SODIMM 81 */ - >; - }; - - /* Colibri PWM_A */ - pinctrl_pwm_a: pwmagrp { - /* both pins are connected together, reserve the unused CSI_D05 */ - fsl,pins = < - IMX8QXP_CSI_D05_CI_PI_D07 0x61 /* SODIMM 59 */ - IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60 /* SODIMM 59 */ - >; - }; - - /* Colibri PWM_B */ - pinctrl_pwm_b: pwmbgrp { - fsl,pins = < - IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60 /* SODIMM 28 */ - >; - }; - - /* Colibri PWM_C */ - pinctrl_pwm_c: pwmcgrp { - fsl,pins = < - IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60 /* SODIMM 30 */ - >; - }; - - /* Colibri PWM_D */ - pinctrl_pwm_d: pwmdgrp { - /* both pins are connected together, reserve the unused CSI_D04 */ - fsl,pins = < - IMX8QXP_CSI_D04_CI_PI_D06 0x61 /* SODIMM 67 */ - IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60 /* SODIMM 67 */ - >; - }; - - /* On-module I2S */ - pinctrl_sai0: sai0grp { - fsl,pins = < - IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040 - IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040 - IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040 - IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 - >; - }; - - /* Colibri Audio Analogue Microphone GND */ - pinctrl_sgtl5000: sgtl5000grp { - fsl,pins = < - /* MIC GND EN */ - IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41 - >; - }; - - /* On-module SGTL5000 clock */ - pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { - fsl,pins = < - IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21 - >; - }; - - /* On-module USB interrupt */ - pinctrl_usb3503a: usb3503agrp { - fsl,pins = < - IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61 - >; - }; - - /* Colibri USB Client Cable Detect */ - pinctrl_usbc_det: usbcdetgrp { - fsl,pins = < - IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 /* SODIMM 137 */ - >; - }; - - /* USB Host Power Enable */ - pinctrl_usbh1_reg: usbh1reggrp { - fsl,pins = < - IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 /* SODIMM 129 */ - >; - }; - - /* On-module eMMC */ - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 - IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 - IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 - IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 - IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 - IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 - IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 - IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 - IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 - IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 - IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 - IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 - >; - }; - - /* Colibri SD/MMC Card Detect */ - pinctrl_usdhc2_gpio: usdhc2gpiogrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 /* SODIMM 43 */ - >; - }; - - pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { - fsl,pins = < - IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60 /* SODIMM 43 */ - >; - }; - - /* Colibri SD/MMC Card */ - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_usdhc2_sleep: usdhc2slpgrp { - fsl,pins = < - IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 47 */ - IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 190 */ - IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 192 */ - IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 49 */ - IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 51 */ - IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 53 */ - IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 - >; - }; - - pinctrl_wifi: wifigrp { - fsl,pins = < - IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20 - >; - }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index afa883389456..7924b0969ad8 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "imx8qxp.dtsi" +#include <dt-bindings/usb/pd.h> / { model = "Freescale i.MX8QXP MEK"; @@ -28,6 +29,21 @@ gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + gpio-sbu-mux { + compatible = "gpio-sbu-mux"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec_mux>; + select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>; + enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>; + orientation-switch; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + }; }; &dsp { @@ -127,6 +143,42 @@ }; }; }; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + reg = <0x50>; + interrupt-parent = <&lsio_gpio1>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + port { + typec_dr_sw: endpoint { + remote-endpoint = <&usb3_drd_sw>; + }; + }; + + usb_con1: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "source"; + data-role = "dual"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + typec_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; + }; + }; &lpuart0 { @@ -148,7 +200,7 @@ }; &thermal_zones { - pmic-thermal0 { + pmic-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; @@ -204,6 +256,27 @@ status = "okay"; }; +&usb3_phy { + status = "okay"; +}; + +&usbotg3 { + status = "okay"; +}; + +&usbotg3_cdns3 { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; + + port { + usb3_drd_sw: endpoint { + remote-endpoint = <&typec_dr_sw>; + }; + }; +}; + + &vpu { compatible = "nxp,imx8qxp-vpu"; status = "okay"; @@ -267,6 +340,18 @@ >; }; + pinctrl_typec: typecgrp { + fsl,pins = < + IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 + >; + }; + + pinctrl_typec_mux: typecmuxgrp { + fsl,pins = < + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi new file mode 100644 index 000000000000..aab655931cde --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +&colibri_gpio_keys { + status = "okay"; +}; + +/* Colibri Ethernet */ +&fec1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog0>; +}; + +/* Colibri SPI */ +&lpspi2 { + cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>, + <&lsio_gpio5 2 GPIO_ACTIVE_LOW>; +}; + +/* Colibri UART_B */ +&lpuart0 { + status = "okay"; +}; + +/* Colibri UART_C */ +&lpuart2 { + status = "okay"; +}; + +/* Colibri UART_A */ +&lpuart3 { + status= "okay"; +}; + +/* Colibri SDCard */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..7264d784ae72 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Toradex + */ + +#include <dt-bindings/input/linux-event-codes.h> + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + /* fixed crystal dedicated to mcp25xx */ + clk16m: clock-16mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; +}; + +&colibri_gpio_keys { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* Colibri SPI */ +&lpspi2 { + status = "okay"; + + mcp2515: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + pinctrl-0 = <&pinctrl_can_int>; + pinctrl-names = "default"; + clocks = <&clk16m>; + spi-max-frequency = <10000000>; + }; +}; + +/* Colibri UART_B */ +&lpuart0 { + status = "okay"; +}; + +/* Colibri UART_C */ +&lpuart2 { + status = "okay"; +}; + +/* Colibri PWM_B */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Colibri PWM_C */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Colibri PWM_D */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Colibri UART_A */ +&lpuart3 { + status = "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi new file mode 100644 index 000000000000..98202a437040 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +#include "imx8x-colibri-iris.dtsi" + +/ { + reg_3v3_vmmc: regulator-3v3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enable_3v3_vmmc>; + enable-active-high; + gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3v3_vmmc"; + startup-delay-us = <100>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>; + + pinctrl_enable_3v3_vmmc: enable_3v3_vmmc { + fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20>; /* SODIMM 100 */ + }; + + pinctrl_lvds_converter: lcd-lvds { + fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18 0x20>, /* SODIMM 55 */ + /* 6B/8B mode. Select LOW - 8B mode (24bit) */ + <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17 0x20>, /* SODIMM 63 */ + <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20>, /* SODIMM 95 */ + <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20>; /* SODIMM 99 */ + }; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + cap-power-off-card; + /delete-property/ no-1-8-v; + vmmc-supply = <®_3v3_vmmc>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi new file mode 100644 index 000000000000..5f30c88855e7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi @@ -0,0 +1,115 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2018-2021 Toradex + */ + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V"; + }; +}; + +&colibri_gpio_keys { + status = "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri I2C */ +&i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_iris>; + + pinctrl_gpio_iris: gpioirisgrp { + fsl,pins = <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20>, /* SODIMM 98 */ + <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20>, /* SODIMM 133 */ + <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20>, /* SODIMM 103 */ + <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20>, /* SODIMM 101 */ + <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20>, /* SODIMM 97 */ + <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020>, /* SODIMM 85 */ + <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20>, /* SODIMM 79 */ + <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041>; /* SODIMM 45 */ + }; + + pinctrl_uart1_forceoff: uart1forceoffgrp { + fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20>; /* SODIMM 22 */ + }; + + pinctrl_uart23_forceoff: uart23forceoffgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20>; /* SODIMM 23 */ + }; +}; + +/* Colibri SPI */ +&lpspi2 { + status = "okay"; +}; + +/* Colibri UART_B */ +&lpuart0 { + status = "okay"; +}; + +/* Colibri UART_C */ +&lpuart2 { + status = "okay"; +}; + +/* Colibri UART_A */ +&lpuart3 { + status= "okay"; +}; + +&lsio_gpio3 { + /* + * This turns the LVDS transceiver on. If one wants to turn the + * transceiver off, that property has to be deleted and the gpio handled + * in userspace. + */ + lvds-tx-on-hog { + gpio-hog; + gpios = <18 0>; + output-high; + }; +}; + +/* Colibri PWM_B */ +&lsio_pwm0 { + status = "okay"; +}; + +/* Colibri PWM_C */ +&lsio_pwm1 { + status = "okay"; +}; + +/* Colibri PWM_D */ +&lsio_pwm2 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi new file mode 100644 index 000000000000..7cad79102e1a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi @@ -0,0 +1,776 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2019 Toradex + */ + +/ { + chosen { + stdout-path = &lpuart3; + }; + + colibri_gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + status = "disabled"; + + key-wakeup { + debounce-interval = <10>; + gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; + label = "Wake-Up"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* TODO Analogue Inputs */ + +/* TODO Cooling maps for DX */ + +&cpu_alert0 { + hysteresis = <2000>; + temperature = <90000>; + type = "passive"; +}; + +&cpu_crit0 { + hysteresis = <2000>; + temperature = <105000>; + type = "critical"; +}; + +/* TODO flexcan1 - 3 */ + +/* TODO GPU */ + +/* On-module I2C */ +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; + status = "okay"; + + /* Touch controller */ + touchscreen@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + status = "disabled"; + }; +}; + +/* TODO i2c lvds0 accessible on FFC (X2) */ + +/* TODO i2c lvds1 accessible on FFC (X3) */ + +/* Colibri I2C */ +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +&jpegdec { + status = "okay"; +}; + +&jpegenc { + status = "okay"; +}; + +/* TODO Parallel RRB */ + +/* Colibri UART_B */ +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Colibri UART_C */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Colibri UART_A */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; +}; + +/* Colibri FastEthernet */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +/* Colibri SPI */ +&lpspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi2>; + cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>; +}; + +&lsio_gpio0 { + gpio-line-names = "", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_68", + "", + "", + "SODIMM_82", + "SODIMM_56", + "SODIMM_28", + "SODIMM_30", + "", + "SODIMM_61", + "SODIMM_103", + "", + "", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_100"; +}; + +&lsio_gpio1 { + gpio-line-names = "SODIMM_86", + "SODIMM_92", + "SODIMM_90", + "SODIMM_88", + "", + "", + "", + "SODIMM_59", + "", + "SODIMM_6", + "SODIMM_8", + "", + "", + "SODIMM_2", + "SODIMM_4", + "SODIMM_34", + "SODIMM_32", + "SODIMM_63", + "SODIMM_55", + "SODIMM_33", + "SODIMM_35", + "SODIMM_36", + "SODIMM_38", + "SODIMM_21", + "SODIMM_19", + "SODIMM_140", + "SODIMM_142", + "SODIMM_196", + "SODIMM_194", + "SODIMM_186", + "SODIMM_188", + "SODIMM_138"; +}; + +&lsio_gpio2 { + gpio-line-names = "SODIMM_23", + "", + "", + "SODIMM_144"; +}; + +&lsio_gpio3 { + gpio-line-names = "SODIMM_96", + "SODIMM_75", + "SODIMM_37", + "SODIMM_29", + "", + "", + "", + "", + "", + "SODIMM_43", + "SODIMM_45", + "SODIMM_69", + "SODIMM_71", + "SODIMM_73", + "SODIMM_77", + "SODIMM_89", + "SODIMM_93", + "SODIMM_95", + "SODIMM_99", + "SODIMM_105", + "SODIMM_107", + "SODIMM_98", + "SODIMM_102", + "SODIMM_104", + "SODIMM_106"; +}; + +&lsio_gpio4 { + gpio-line-names = "", + "", + "", + "SODIMM_129", + "SODIMM_133", + "SODIMM_127", + "SODIMM_131", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_44", + "", + "SODIMM_76", + "SODIMM_31", + "SODIMM_47", + "SODIMM_190", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53"; +}; + +&lsio_gpio5 { + gpio-line-names = "", + "SODIMM_57", + "SODIMM_65", + "SODIMM_85", + "", + "", + "", + "", + "SODIMM_135", + "SODIMM_137", + "UNUSABLE_SODIMM_180", + "UNUSABLE_SODIMM_184"; +}; + +/* Colibri PWM_B */ +&lsio_pwm0 { + #pwm-cells = <3>; + pinctrl-0 = <&pinctrl_pwm_b>; + pinctrl-names = "default"; +}; + +/* Colibri PWM_C */ +&lsio_pwm1 { + #pwm-cells = <3>; + pinctrl-0 = <&pinctrl_pwm_c>; + pinctrl-names = "default"; +}; + +/* Colibri PWM_D */ +&lsio_pwm2 { + #pwm-cells = <3>; + pinctrl-0 = <&pinctrl_pwm_d>; + pinctrl-names = "default"; +}; + +/* TODO MIPI CSI */ + +/* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */ + +/* TODO on-module PCIe for Wi-Fi */ + +/* TODO On-module i2s / Audio */ + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_module_3v3>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + disable-wp; + no-1-8-v; +}; + +/* TODO USB Client/Host */ + +/* TODO USB Host */ + +/* TODO VPU Encoder/Decoder */ + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>, + <&pinctrl_hog2>, <&pinctrl_lpspi2_cs2>; + + /* On-module touch pen-down interrupt */ + pinctrl_ad7879_int: ad7879intgrp { + fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21>; + }; + + /* Colibri Analogue Inputs */ + pinctrl_adc0: adc0grp { + fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60>, /* SODIMM 8 */ + <IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60>, /* SODIMM 6 */ + <IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60>, /* SODIMM 4 */ + <IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60>; /* SODIMM 2 */ + }; + + /* Atmel MXT touchsceen + Capacitive Touch Adapter */ + /* NOTE: This pingroup conflicts with pingroups + * pinctrl_pwm_b/pinctrl_pwm_c. Don't enable them + * simultaneously. + */ + pinctrl_atmel_adap: atmeladaptergrp { + fsl,pins = <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22 0x21>, /* SODIMM 30 */ + <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21 0x4000021>; /* SODIMM 28 */ + }; + + /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */ + pinctrl_atmel_conn: atmelconnectorgrp { + fsl,pins = <IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x4000021>, /* SODIMM 107 */ + <IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x21>; /* SODIMM 106 */ + }; + + pinctrl_can_int: canintgrp { + fsl,pins = <IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40>; /* SODIMM 73 */ + }; + + pinctrl_csi_ctl: csictlgrp { + fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20>, /* SODIMM 77 */ + <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20>; /* SODIMM 89 */ + }; + + pinctrl_csi_mclk: csimclkgrp { + fsl,pins = <IMX8QXP_CSI_MCLK_CI_PI_MCLK 0xC0000041>; /* SODIMM 75 / X3-12 */ + }; + + pinctrl_ext_io0: extio0grp { + fsl,pins = <IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040>; /* SODIMM 135 */ + }; + + /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ + pinctrl_fec1: fec1grp { + fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020>, + <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>, + <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61>, + <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061>, + <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61>, + <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61>, + <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61>, + <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61>, + <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61>, + <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61>; + }; + + pinctrl_fec1_sleep: fec1slpgrp { + fsl,pins = <IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041>, + <IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041>, + <IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41>, + <IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41>, + <IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41>, + <IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41>, + <IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41>, + <IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41>, + <IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41>, + <IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41>; + }; + + /* Colibri optional CAN on UART_B RTS/CTS */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = <IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21>, /* SODIMM 32 */ + <IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21>; /* SODIMM 34 */ + }; + + /* Colibri optional CAN on PS2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = <IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21>, /* SODIMM 55 */ + <IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21>; /* SODIMM 63 */ + }; + + /* Colibri optional CAN on UART_A TXD/RXD */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21>, /* SODIMM 35 */ + <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21>; /* SODIMM 33 */ + }; + + /* Colibri LCD Back-Light GPIO */ + pinctrl_gpio_bl_on: gpioblongrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60>; /* SODIMM 71 */ + }; + + /* HDMI Hot Plug Detect on FFC (X2) */ + pinctrl_gpio_hpd: gpiohpdgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31 0x20>; /* SODIMM 138 */ + }; + + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041>; /* SODIMM 45 */ + }; + + pinctrl_hog0: hog0grp { + fsl,pins = <IMX8QXP_CSI_D07_CI_PI_D09 0x61>, /* SODIMM 65 */ + <IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20>, /* SODIMM 69 */ + <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20>, /* SODIMM 79 */ + <IMX8QXP_CSI_D02_CI_PI_D04 0x61>, /* SODIMM 79 */ + <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020>, /* SODIMM 85 */ + <IMX8QXP_CSI_D06_CI_PI_D08 0x61>, /* SODIMM 85 */ + <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20>, /* SODIMM 95 */ + <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20>, /* SODIMM 97 */ + <IMX8QXP_CSI_D03_CI_PI_D05 0x61>, /* SODIMM 97 */ + <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20>, /* SODIMM 99 */ + <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20>, /* SODIMM 101 */ + <IMX8QXP_CSI_D00_CI_PI_D02 0x61>, /* SODIMM 101 */ + <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20>, /* SODIMM 103 */ + <IMX8QXP_CSI_D01_CI_PI_D03 0x61>, /* SODIMM 103 */ + <IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20>, /* SODIMM 105 */ + <IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20>, /* SODIMM 127 */ + <IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20>, /* SODIMM 131 */ + <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20>, /* SODIMM 133 */ + <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20>, /* SODIMM 96 */ + <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20>, /* SODIMM 98 */ + <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20>, /* SODIMM 100 */ + <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20>, /* SODIMM 102 */ + <IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20>; /* SODIMM 104 */ + }; + + pinctrl_hog1: hog1grp { + fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20>, /* SODIMM 75 */ + <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20>; /* SODIMM 93 */ + }; + + pinctrl_hog2: hog2grp { + fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20>; /* SODIMM 75 */ + }; + + /* + * This pin is used in the SCFW as a UART. Using it from + * Linux would require rewritting the SCFW board file. + */ + pinctrl_hog_scfw: hogscfwgrp { + fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20>; /* SODIMM 144 */ + }; + + /* On Module I2C */ + pinctrl_i2c0: i2c0grp { + fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021>, + <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021>; + }; + + /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ + pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { + fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020>, /* SODIMM 140 */ + <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020>; /* SODIMM 142 */ + }; + + /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ + pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { + fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020>, /* SODIMM 186 */ + <IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020>; /* SODIMM 188 */ + }; + + /* Colibri I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021>, /* SODIMM 196 */ + <IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021>; /* SODIMM 194 */ + }; + + /* Colibri Parallel RGB LCD Interface */ + pinctrl_lcdif: lcdifgrp { + fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60>, /* SODIMM 56 */ + <IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60>, /* SODIMM 68 */ + <IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60>, /* SODIMM 82 */ + <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x40>, /* SODIMM 44 */ + <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x40>, /* SODIMM 44 */ + <IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60>, /* SODIMM 76 */ + <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60>, /* SODIMM 76 */ + <IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60>, /* SODIMM 70 */ + <IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60>, /* SODIMM 60 */ + <IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60>, /* SODIMM 58 */ + <IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60>, /* SODIMM 78 */ + <IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60>, /* SODIMM 72 */ + <IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60>, /* SODIMM 80 */ + <IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60>, /* SODIMM 46 */ + <IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60>, /* SODIMM 62 */ + <IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60>, /* SODIMM 48 */ + <IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60>, /* SODIMM 74 */ + <IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60>, /* SODIMM 50 */ + <IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60>, /* SODIMM 52 */ + <IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60>, /* SODIMM 54 */ + <IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60>, /* SODIMM 66 */ + <IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60>, /* SODIMM 64 */ + <IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60>, /* SODIMM 57 */ + <IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60>, /* SODIMM 57 */ + <IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60>; /* SODIMM 61 */ + }; + + /* Colibri SPI */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21>, /* SODIMM 86 */ + <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040>, /* SODIMM 92 */ + <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040>, /* SODIMM 90 */ + <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040>; /* SODIMM 88 */ + }; + + pinctrl_lpspi2_cs2: lpspi2cs2grp { + fsl,pins = <IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x21>; /* SODIMM 65 */ + }; + + /* Colibri UART_B */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020>, /* SODIMM 36 */ + <IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020>, /* SODIMM 38 */ + <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020>, /* SODIMM 34 */ + <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020>; /* SODIMM 32 */ + }; + + /* Colibri UART_C */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = <IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020>, /* SODIMM 19 */ + <IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020>; /* SODIMM 21 */ + }; + + /* Colibri UART_A */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020>, /* SODIMM 33 */ + <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020>; /* SODIMM 35 */ + }; + + /* Colibri UART_A Control */ + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20>, /* SODIMM 23 */ + <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20>, /* SODIMM 25 */ + <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20>, /* SODIMM 27 */ + <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20>, /* SODIMM 29 */ + <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20>, /* SODIMM 31 */ + <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20>; /* SODIMM 37 */ + }; + + /* On module wifi module */ + pinctrl_pcieb: pciebgrp { + fsl,pins = <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061>, /* SODIMM 178 */ + <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061>, /* SODIMM 94 */ + <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60>; /* SODIMM 81 */ + }; + + /* Colibri PWM_A */ + pinctrl_pwm_a: pwmagrp { + /* both pins are connected together, reserve the unused CSI_D05 */ + fsl,pins = <IMX8QXP_CSI_D05_CI_PI_D07 0x61>, /* SODIMM 59 */ + <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60>; /* SODIMM 59 */ + }; + + /* Colibri PWM_B */ + pinctrl_pwm_b: pwmbgrp { + fsl,pins = <IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60>; /* SODIMM 28 */ + }; + + /* Colibri PWM_C */ + pinctrl_pwm_c: pwmcgrp { + fsl,pins = <IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60>; /* SODIMM 30 */ + }; + + /* Colibri PWM_D */ + pinctrl_pwm_d: pwmdgrp { + /* both pins are connected together, reserve the unused CSI_D04 */ + fsl,pins = <IMX8QXP_CSI_D04_CI_PI_D06 0x61>, /* SODIMM 67 */ + <IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60>; /* SODIMM 67 */ + }; + + /* On-module I2S */ + pinctrl_sai0: sai0grp { + fsl,pins = <IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040>, + <IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040>, + <IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040>, + <IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040>; + }; + + /* Colibri Audio Analogue Microphone GND */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41>; + }; + + /* On-module SGTL5000 clock */ + pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { + fsl,pins = <IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21>; + }; + + /* On-module USB interrupt */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = <IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61>; + }; + + /* Colibri USB Client Cable Detect */ + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = <IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040>; /* SODIMM 137 */ + }; + + /* USB Host Power Enable */ + pinctrl_usbh1_reg: usbh1reggrp { + fsl,pins = <IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040>; /* SODIMM 129 */ + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21>, + <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21>, + <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21>, + <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21>, + <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21>, + <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21>, + <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21>, + <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21>, + <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21>, + <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41>, + <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21>; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21>, + <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21>, + <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21>, + <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21>, + <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21>, + <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21>, + <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21>, + <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21>, + <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21>, + <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41>, + <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21>; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, + <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21>, + <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21>, + <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21>, + <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21>, + <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21>, + <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21>, + <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21>, + <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21>, + <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21>, + <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41>, + <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21>; + }; + + /* Colibri SD/MMC Card Detect */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021>; /* SODIMM 43 */ + }; + + pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { + fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60>; /* SODIMM 43 */ + }; + + /* Colibri SD/MMC Card */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = <IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60>, /* SODIMM 47 */ + <IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60>, /* SODIMM 190 */ + <IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60>, /* SODIMM 192 */ + <IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60>, /* SODIMM 49 */ + <IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60>, /* SODIMM 51 */ + <IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60>, /* SODIMM 53 */ + <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21>; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 41efd97dd6d6..e8d49660ac85 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -153,6 +153,14 @@ nxp,no-divider; }; + tpm1: pwm@44310000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x44310000 0x1000>; + clocks = <&clk IMX93_CLK_TPM1_GATE>; + #pwm-cells = <3>; + status = "disabled"; + }; + tpm2: pwm@44320000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x44320000 0x10000>; @@ -247,6 +255,22 @@ status = "okay"; }; + bbnsm: bbnsm@44440000 { + compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; + reg = <0x44440000 0x10000>; + + bbnsm_rtc: rtc { + compatible = "nxp,imx93-bbnsm-rtc"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + bbnsm_pwrkey: pwrkey { + compatible = "nxp,imx93-bbnsm-pwrkey"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + linux,code = <KEY_POWER>; + }; + }; + clk: clock-controller@44450000 { compatible = "fsl,imx93-ccm"; reg = <0x44450000 0x10000>; @@ -320,6 +344,14 @@ status = "disabled"; }; + tpm3: pwm@424e0000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x424e0000 0x1000>; + clocks = <&clk IMX93_CLK_TPM3_GATE>; + #pwm-cells = <3>; + status = "disabled"; + }; + tpm4: pwm@424f0000 { compatible = "fsl,imx7ulp-pwm"; reg = <0x424f0000 0x10000>; @@ -442,6 +474,21 @@ status = "disabled"; }; + flexspi1: spi@425e0000 { + compatible = "nxp,imx8mm-fspi"; + reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>, + <&clk IMX93_CLK_FLEXSPI1_GATE>; + clock-names = "fspi_en", "fspi"; + assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>; + status = "disabled"; + }; + lpuart7: serial@42690000 { compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 058237681fe5..79ac09b58a89 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts new file mode 100644 index 000000000000..b1b45b4fa9d4 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -0,0 +1,239 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-372x.dtsi" + +/ { + model = "GL.iNet GL-MV1000"; + compatible = "glinet,gl-mv1000", "marvell,armada3720"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + switch { + label = "switch"; + linux,code = <BTN_0>; + gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + vpn { + label = "green:vpn"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0xf0000 0x8000>; + }; + + factory: partition@f8000 { + label = "factory"; + reg = <0xf8000 0x8000>; + read-only; + }; + + partition@100000 { + label = "dtb"; + reg = <0x100000 0x10000>; + read-only; + }; + + partition@110000 { + label = "rescue"; + reg = <0x110000 0x1000000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + nvmem-cells = <&macaddr_factory_0>; + nvmem-cell-names = "mac-address"; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_factory_6: macaddr@6 { + reg = <0x6 0x6>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 7ca71f2d7afb..39ce6e25a8ef 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -455,4 +455,5 @@ phys = <&cp0_comphy5 2>; phy-names = "cp0-pcie2-x1-phy"; reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 4e6d29ad32eb..2c920e22cec2 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -317,7 +317,7 @@ * first one that will have a critical trip point will be chosen. */ thermal-zones { - ap_thermal_ic: ap-thermal-ic { + ap_thermal_ic: ap-ic-thermal { polling-delay-passive = <0>; /* Interrupt driven */ polling-delay = <0>; /* Interrupt driven */ @@ -334,7 +334,7 @@ cooling-maps { }; }; - ap_thermal_cpu0: ap-thermal-cpu0 { + ap_thermal_cpu0: ap-cpu0-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -367,7 +367,7 @@ }; }; - ap_thermal_cpu1: ap-thermal-cpu1 { + ap_thermal_cpu1: ap-cpu1-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -400,7 +400,7 @@ }; }; - ap_thermal_cpu2: ap-thermal-cpu2 { + ap_thermal_cpu2: ap-cpu2-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; @@ -433,7 +433,7 @@ }; }; - ap_thermal_cpu3: ap-thermal-cpu3 { + ap_thermal_cpu3: ap-cpu3-thermal { polling-delay-passive = <1000>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi index 8107d120a8a7..2f9ab6b4a2c9 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi @@ -54,7 +54,7 @@ <0x00d0000 0x1000>, /* GICH */ <0x00e0000 0x2000>; /* GICV */ - gic_its_ap0: interrupt-controller@3040000 { + gic_its_ap0: msi-controller@3040000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi index 7d0043824f2a..0cc9ee9871e7 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -25,7 +25,7 @@ * The cooling maps are empty as there are no cooling devices. */ thermal-zones { - CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) { polling-delay-passive = <0>; /* Interrupt driven */ polling-delay = <0>; /* Interrupt driven */ diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 8e4ec243fb8f..32cfb3e2efc3 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -282,8 +282,9 @@ port@a { reg = <10>; - label = "cpu"; ethernet = <&cp0_eth0>; + phy-mode = "10gbase-r"; + managed = "in-band-status"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index d5cd7b3e09cf..c99c3372a4b5 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -52,4 +52,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 879dff24dcd3..ed1a9d319415 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -559,7 +559,7 @@ status = "disabled"; }; - nandc: nfi@1100e000 { + nandc: nand-controller@1100e000 { compatible = "mediatek,mt2712-nfc"; reg = <0 0x1100e000 0 0x1000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi new file mode 100644 index 000000000000..3330a03c2f74 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2020 MediaTek Inc. + * Copyright (c) 2023 BayLibre Inc. + */ + +#include <dt-bindings/input/input.h> + +&pwrap { + mt6357_pmic: pmic { + compatible = "mediatek,mt6357"; + + regulators { + mt6357_vproc_reg: buck-vproc { + regulator-name = "vproc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + mt6357_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + mt6357_vmodem_reg: buck-vmodem { + regulator-name = "vmodem"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1193750>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + }; + + mt6357_vs1_reg: buck-vs1 { + regulator-name = "vs1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2200000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + mt6357_vpa_reg: buck-vpa { + regulator-name = "vpa"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <3650000>; + regulator-ramp-delay = <50000>; + regulator-enable-ramp-delay = <220>; + }; + + mt6357_vfe28_reg: ldo-vfe28 { + compatible = "regulator-fixed"; + regulator-name = "vfe28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vxo22_reg: ldo-vxo22 { + regulator-name = "vxo22"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2400000>; + regulator-enable-ramp-delay = <110>; + }; + + mt6357_vrf18_reg: ldo-vrf18 { + compatible = "regulator-fixed"; + regulator-name = "vrf18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <110>; + }; + + mt6357_vrf12_reg: ldo-vrf12 { + compatible = "regulator-fixed"; + regulator-name = "vrf12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <110>; + }; + + mt6357_vefuse_reg: ldo-vefuse { + regulator-name = "vefuse"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn33_bt_reg: ldo-vcn33-bt { + regulator-name = "vcn33-bt"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn33_wifi_reg: ldo-vcn33-wifi { + regulator-name = "vcn33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3500000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn28_reg: ldo-vcn28 { + compatible = "regulator-fixed"; + regulator-name = "vcn28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcn18_reg: ldo-vcn18 { + compatible = "regulator-fixed"; + regulator-name = "vcn18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcama_reg: ldo-vcama { + regulator-name = "vcama"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcamd_reg: ldo-vcamd { + regulator-name = "vcamd"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vcamio_reg: ldo-vcamio18 { + compatible = "regulator-fixed"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vldo28_reg: ldo-vldo28 { + regulator-name = "vldo28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vsram_others_reg: ldo-vsram-others { + regulator-name = "vsram-others"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + + mt6357_vsram_proc_reg: ldo-vsram-proc { + regulator-name = "vsram-proc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <110>; + regulator-always-on; + }; + + mt6357_vaux18_reg: ldo-vaux18 { + compatible = "regulator-fixed"; + regulator-name = "vaux18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vaud28_reg: ldo-vaud28 { + compatible = "regulator-fixed"; + regulator-name = "vaud28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vio28_reg: ldo-vio28 { + compatible = "regulator-fixed"; + regulator-name = "vio28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vio18_reg: ldo-vio18 { + compatible = "regulator-fixed"; + regulator-name = "vio18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <264>; + regulator-always-on; + }; + + mt6357_vdram_reg: ldo-vdram { + regulator-name = "vdram"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1200000>; + regulator-enable-ramp-delay = <3300>; + }; + + mt6357_vmc_reg: ldo-vmc { + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + + mt6357_vmch_reg: ldo-vmch { + regulator-name = "vmch"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + + mt6357_vemc_reg: ldo-vemc { + regulator-name = "vemc"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + regulator-always-on; + }; + + mt6357_vsim1_reg: ldo-vsim1 { + regulator-name = "vsim1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vsim2_reg: ldo-vsim2 { + regulator-name = "vsim2"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + + mt6357_vibr_reg: ldo-vibr { + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <44>; + }; + + mt6357_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + }; + + rtc { + compatible = "mediatek,mt6357-rtc"; + }; + + keys { + compatible = "mediatek,mt6357-keys"; + + key-power { + linux,keycodes = <KEY_POWER>; + wakeup-source; + }; + + key-home { + linux,keycodes = <KEY_HOME>; + wakeup-source; + }; + + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts index d3415527d389..507b5b567a36 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts +++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts @@ -5,6 +5,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "mt6795.dtsi" / { @@ -48,7 +49,172 @@ }; }; +&fhctl { + clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>, + <&apmixedsys CLK_APMIXED_MSDCPLL>; + mediatek,hopping-ssc-percent = <8>, <5>, <8>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bma255"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_pins>; + }; + + magnetometer@12 { + compatible = "bosch,bmm150"; + reg = <0x12>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_pins>; + syna,startup-delay-ms = <160>; + syna,reset-delay-ms = <90>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + pn547: nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&nfc_pins>; + enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>; + }; + + proximity@48 { + compatible = "sensortek,stk3310"; + reg = <0x48>; + interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&proximity_pins>; + }; +}; + &pio { + nfc_pins: nfc-pins { + pins-irq { + pinmux = <PINMUX_GPIO3__FUNC_GPIO3>; + bias-pull-down; + input-enable; + }; + + pins-fw-ven { + pinmux = <PINMUX_GPIO94__FUNC_GPIO94>, + <PINMUX_GPIO149__FUNC_GPIO149>; + }; + }; + + ts_pins: touchscreen-pins { + pins-irq { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + bias-pull-up; + input-enable; + }; + + pins-rst { + pinmux = <PINMUX_GPIO102__FUNC_GPIO102>; + output-high; + }; + }; + + proximity_pins: proximity-pins { + pins-irq { + pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; + bias-pull-up; + input-enable; + }; + }; + + accel_pins: accelerometer-pins { + pins-irq { + pinmux = <PINMUX_GPIO12__FUNC_GPIO12>; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO45__FUNC_SDA0>, + <PINMUX_GPIO46__FUNC_SCL0>; + input-enable; + }; + }; + + i2c1_pins: i2c1-pins { + pins-bus { + pinmux = <PINMUX_GPIO125__FUNC_SDA1>, + <PINMUX_GPIO126__FUNC_SCL1>; + bias-disable; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO43__FUNC_SDA2>, + <PINMUX_GPIO44__FUNC_SCL2>; + bias-disable; + }; + }; + + i2c3_pins: i2c3-pins { + pins-bus { + pinmux = <PINMUX_GPIO136__FUNC_SDA3>, + <PINMUX_GPIO137__FUNC_SCL3>; + bias-disable; + }; + }; + + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO100__FUNC_SDA4>, + <PINMUX_GPIO101__FUNC_SCL4>; + bias-disable; + }; + }; + uart0_pins: uart0-pins { pins-rx { pinmux = <PINMUX_GPIO113__FUNC_URXD0>; diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index b3fc76d837a9..17019fbea0af 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mediatek,mt6795-clk.h> #include <dt-bindings/pinctrl/mt6795-pinfunc.h> +#include <dt-bindings/power/mt6795-power.h> #include <dt-bindings/reset/mediatek,mt6795-resets.h> / { @@ -264,6 +265,84 @@ #reset-cells = <1>; }; + scpsys: syscon@10006000 { + compatible = "syscon", "simple-mfd"; + reg = <0 0x10006000 0 0x1000>; + #power-domain-cells = <1>; + + /* System Power Manager */ + spm: power-controller { + compatible = "mediatek,mt6795-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* power domains of the SoC */ + power-domain@MT6795_POWER_DOMAIN_VDEC { + reg = <MT6795_POWER_DOMAIN_VDEC>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + power-domain@MT6795_POWER_DOMAIN_VENC { + reg = <MT6795_POWER_DOMAIN_VENC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>; + clock-names = "mm", "venc"; + #power-domain-cells = <0>; + }; + power-domain@MT6795_POWER_DOMAIN_ISP { + reg = <MT6795_POWER_DOMAIN_ISP>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + }; + + power-domain@MT6795_POWER_DOMAIN_MM { + reg = <MT6795_POWER_DOMAIN_MM>; + clocks = <&topckgen CLK_TOP_MM_SEL>; + clock-names = "mm"; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + + power-domain@MT6795_POWER_DOMAIN_MJC { + reg = <MT6795_POWER_DOMAIN_MJC>; + clocks = <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_MJC_SEL>; + clock-names = "mm", "mjc"; + #power-domain-cells = <0>; + }; + + power-domain@MT6795_POWER_DOMAIN_AUDIO { + reg = <MT6795_POWER_DOMAIN_AUDIO>; + #power-domain-cells = <0>; + }; + + mfg_async: power-domain@MT6795_POWER_DOMAIN_MFG_ASYNC { + reg = <MT6795_POWER_DOMAIN_MFG_ASYNC>; + clocks = <&clk26m>; + clock-names = "mfg"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT6795_POWER_DOMAIN_MFG_2D { + reg = <MT6795_POWER_DOMAIN_MFG_2D>; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + power-domain@MT6795_POWER_DOMAIN_MFG { + reg = <MT6795_POWER_DOMAIN_MFG>; + #power-domain-cells = <0>; + mediatek,infracfg = <&infracfg>; + }; + }; + }; + }; + }; + pio: pinctrl@10005000 { compatible = "mediatek,mt6795-pinctrl"; reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; @@ -310,6 +389,18 @@ clock-names = "clk13m"; }; + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt6795-apmixedsys", "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + + fhctl: clock-controller@10209f00 { + compatible = "mediatek,mt6795-fhctl"; + reg = <0 0x10209f00 0 0x100>; + status = "disabled"; + }; + gic: interrupt-controller@10221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -433,6 +524,85 @@ status = "disabled"; }; + pwm2: pwm@11006000 { + compatible = "mediatek,mt6795-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>, + <&pericfg CLK_PERI_PWM6>, + <&pericfg CLK_PERI_PWM7>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3", + "pwm4", "pwm5", "pwm6", "pwm7"; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@11010000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11011000 { + compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c"; + reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>; + clock-div = <16>; + clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt6795-mmc"; reg = <0 0x11230000 0 0x1000>; @@ -473,5 +643,17 @@ clock-names = "source", "hclk"; status = "disabled"; }; + + vdecsys: clock-controller@16000000 { + compatible = "mediatek,mt6795-vdecsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@18000000 { + compatible = "mediatek,mt6795-vencsys"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 20129bc98e21..006cd639059f 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -539,7 +539,7 @@ }; }; - nandc: nfi@1100d000 { + nandc: nand-controller@1100d000 { compatible = "mediatek,mt7622-nfc"; reg = <0 0x1100D000 0 0x1000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi index 6a54315cf650..2374c0953057 100644 --- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi @@ -124,7 +124,7 @@ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; }; - mmsys: mmsys@14000000 { + mmsys: syscon@14000000 { compatible = "mediatek,mt8167-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index d452cab28c67..d77f6af19065 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -58,7 +58,7 @@ gpios = <&pio 69 GPIO_ACTIVE_LOW>; linux,code = <SW_LID>; linux,input-type = <EV_SW>; - gpio-key,wakeup; + wakeup-source; }; switch-power { @@ -66,7 +66,7 @@ gpios = <&pio 14 GPIO_ACTIVE_HIGH>; linux,code = <KEY_POWER>; debounce-interval = <30>; - gpio-key,wakeup; + wakeup-source; }; switch-tablet-mode { @@ -74,7 +74,7 @@ gpios = <&pio 121 GPIO_ACTIVE_HIGH>; linux,code = <SW_TABLET_MODE>; linux,input-type = <EV_SW>; - gpio-key,wakeup; + wakeup-source; }; switch-volume-down { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 52dc4a50e34d..3e3f4b1b00f0 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -52,7 +52,6 @@ &gpu { mali-supply = <&mt6358_vgpu_reg>; - sram-supply = <&mt6358_vsram_gpu_reg>; }; &i2c0 { @@ -138,6 +137,22 @@ non-removable; }; +&mt6358_vgpu_reg { + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <900000>; + + regulator-coupled-with = <&mt6358_vsram_gpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + +&mt6358_vsram_gpu_reg { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + + regulator-coupled-with = <&mt6358_vgpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &pio { i2c_pins_0: i2c0{ pins_i2c{ diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index fbe14b13051a..63952c1251df 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -294,7 +294,6 @@ &gpu { mali-supply = <&mt6358_vgpu_reg>; - sram-supply = <&mt6358_vsram_gpu_reg>; }; &i2c0 { @@ -401,6 +400,14 @@ Avdd-supply = <&mt6358_vaud28_reg>; }; +&mt6358_vgpu_reg { + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <900000>; + + regulator-coupled-with = <&mt6358_vsram_gpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &mt6358_vsim1_reg { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; @@ -411,6 +418,14 @@ regulator-max-microvolt = <2700000>; }; +&mt6358_vsram_gpu_reg { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + + regulator-coupled-with = <&mt6358_vgpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &pio { aud_pins_default: audiopins { pins_bus { diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index a1d01639df30..526bcae7a3f8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -71,7 +71,6 @@ &gpu { mali-supply = <&mt6358_vgpu_reg>; - sram-supply = <&mt6358_vsram_gpu_reg>; }; &i2c0 { @@ -176,6 +175,22 @@ non-removable; }; +&mt6358_vgpu_reg { + regulator-min-microvolt = <625000>; + regulator-max-microvolt = <900000>; + + regulator-coupled-with = <&mt6358_vsram_gpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + +&mt6358_vsram_gpu_reg { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + + regulator-coupled-with = <&mt6358_vgpu_reg>; + regulator-coupled-max-spread = <100000>; +}; + &pio { i2c_pins_0: i2c0 { pins_i2c{ diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 3d1d7870a5f1..5169779d01df 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -563,82 +563,82 @@ opp-300000000 { opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <625000>, <850000>; + opp-microvolt = <625000>; }; opp-320000000 { opp-hz = /bits/ 64 <320000000>; - opp-microvolt = <631250>, <850000>; + opp-microvolt = <631250>; }; opp-340000000 { opp-hz = /bits/ 64 <340000000>; - opp-microvolt = <637500>, <850000>; + opp-microvolt = <637500>; }; opp-360000000 { opp-hz = /bits/ 64 <360000000>; - opp-microvolt = <643750>, <850000>; + opp-microvolt = <643750>; }; opp-380000000 { opp-hz = /bits/ 64 <380000000>; - opp-microvolt = <650000>, <850000>; + opp-microvolt = <650000>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <656250>, <850000>; + opp-microvolt = <656250>; }; opp-420000000 { opp-hz = /bits/ 64 <420000000>; - opp-microvolt = <662500>, <850000>; + opp-microvolt = <662500>; }; opp-460000000 { opp-hz = /bits/ 64 <460000000>; - opp-microvolt = <675000>, <850000>; + opp-microvolt = <675000>; }; opp-500000000 { opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <687500>, <850000>; + opp-microvolt = <687500>; }; opp-540000000 { opp-hz = /bits/ 64 <540000000>; - opp-microvolt = <700000>, <850000>; + opp-microvolt = <700000>; }; opp-580000000 { opp-hz = /bits/ 64 <580000000>; - opp-microvolt = <712500>, <850000>; + opp-microvolt = <712500>; }; opp-620000000 { opp-hz = /bits/ 64 <620000000>; - opp-microvolt = <725000>, <850000>; + opp-microvolt = <725000>; }; opp-653000000 { opp-hz = /bits/ 64 <653000000>; - opp-microvolt = <743750>, <850000>; + opp-microvolt = <743750>; }; opp-698000000 { opp-hz = /bits/ 64 <698000000>; - opp-microvolt = <768750>, <868750>; + opp-microvolt = <768750>; }; opp-743000000 { opp-hz = /bits/ 64 <743000000>; - opp-microvolt = <793750>, <893750>; + opp-microvolt = <793750>; }; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <825000>, <925000>; + opp-microvolt = <825000>; }; }; @@ -1752,7 +1752,7 @@ }; gpu: gpu@13040000 { - compatible = "mediatek,mt8183-mali", "arm,mali-bifrost"; + compatible = "mediatek,mt8183b-mali", "arm,mali-bifrost"; reg = <0 0x13040000 0 0x4000>; interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>, diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index a0d3e1f731bd..78ff8ba5718e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -1075,6 +1075,23 @@ #clock-cells = <1>; }; + gpu: gpu@13040000 { + compatible = "mediatek,mt8186-mali", + "arm,mali-bifrost"; + reg = <0 0x13040000 0 0x4000>; + + clocks = <&mfgsys CLK_MFG_BG3D>; + interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + power-domains = <&spm MT8186_POWER_DOMAIN_MFG2>, + <&spm MT8186_POWER_DOMAIN_MFG3>; + power-domain-names = "core0", "core1"; + #cooling-cells = <2>; + status = "disabled"; + }; + mmsys: syscon@14000000 { compatible = "mediatek,mt8186-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi index 9f12257ab4e7..5a440504d4f9 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi @@ -275,6 +275,11 @@ remote-endpoint = <&anx7625_in>; }; +&gpu { + mali-supply = <&mt6315_7_vbuck1>; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -380,6 +385,14 @@ pinctrl-0 = <&i2c7_pins>; }; +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + &mipi_tx0 { status = "okay"; }; @@ -439,6 +452,13 @@ regulator-always-on; }; +&mt6359_vsram_others_ldo_reg { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6315_7_vbuck1>; + regulator-coupled-max-spread = <10000>; +}; + &mt6359_vufs_ldo_reg { regulator-always-on; }; @@ -1400,9 +1420,11 @@ regulator-compatible = "vbuck1"; regulator-name = "Vgpu"; regulator-min-microvolt = <606250>; - regulator-max-microvolt = <1193750>; + regulator-max-microvolt = <800000>; regulator-enable-ramp-delay = <256>; regulator-allowed-modes = <0 1 2>; + regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>; + regulator-coupled-max-spread = <10000>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 87b91c8feaf9..5c30caf74026 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -312,6 +312,91 @@ clock-frequency = <13000000>; }; + gpu_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + opp-microvolt = <606250>; + }; + + opp-399000000 { + opp-hz = /bits/ 64 <399000000>; + opp-microvolt = <618750>; + }; + + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <631250>; + }; + + opp-482000000 { + opp-hz = /bits/ 64 <482000000>; + opp-microvolt = <643750>; + }; + + opp-523000000 { + opp-hz = /bits/ 64 <523000000>; + opp-microvolt = <656250>; + }; + + opp-564000000 { + opp-hz = /bits/ 64 <564000000>; + opp-microvolt = <668750>; + }; + + opp-605000000 { + opp-hz = /bits/ 64 <605000000>; + opp-microvolt = <681250>; + }; + + opp-647000000 { + opp-hz = /bits/ 64 <647000000>; + opp-microvolt = <693750>; + }; + + opp-688000000 { + opp-hz = /bits/ 64 <688000000>; + opp-microvolt = <706250>; + }; + + opp-724000000 { + opp-hz = /bits/ 64 <724000000>; + opp-microvolt = <725000>; + }; + + opp-748000000 { + opp-hz = /bits/ 64 <748000000>; + opp-microvolt = <737500>; + }; + + opp-772000000 { + opp-hz = /bits/ 64 <772000000>; + opp-microvolt = <750000>; + }; + + opp-795000000 { + opp-hz = /bits/ 64 <795000000>; + opp-microvolt = <762500>; + }; + + opp-819000000 { + opp-hz = /bits/ 64 <819000000>; + opp-microvolt = <775000>; + }; + + opp-843000000 { + opp-hz = /bits/ 64 <843000000>; + opp-microvolt = <787500>; + }; + + opp-866000000 { + opp-hz = /bits/ 64 <866000000>; + opp-microvolt = <800000>; + }; + }; + soc { #address-cells = <2>; #size-cells = <2>; @@ -412,15 +497,16 @@ #power-domain-cells = <0>; }; - power-domain@MT8192_POWER_DOMAIN_MFG0 { + mfg0: power-domain@MT8192_POWER_DOMAIN_MFG0 { reg = <MT8192_POWER_DOMAIN_MFG0>; - clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>; - clock-names = "mfg"; + clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>, + <&topckgen CLK_TOP_MFG_REF_SEL>; + clock-names = "mfg", "alt"; #address-cells = <1>; #size-cells = <0>; #power-domain-cells = <1>; - power-domain@MT8192_POWER_DOMAIN_MFG1 { + mfg1: power-domain@MT8192_POWER_DOMAIN_MFG1 { reg = <MT8192_POWER_DOMAIN_MFG1>; mediatek,infracfg = <&infracfg>; #address-cells = <1>; @@ -1266,6 +1352,28 @@ status = "disabled"; }; + gpu: gpu@13000000 { + compatible = "mediatek,mt8192-mali", "arm,mali-valhall-jm"; + reg = <0 0x13000000 0 0x4000>; + interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + + clocks = <&apmixedsys CLK_APMIXED_MFGPLL>; + + power-domains = <&spm MT8192_POWER_DOMAIN_MFG2>, + <&spm MT8192_POWER_DOMAIN_MFG3>, + <&spm MT8192_POWER_DOMAIN_MFG4>, + <&spm MT8192_POWER_DOMAIN_MFG5>, + <&spm MT8192_POWER_DOMAIN_MFG6>; + power-domain-names = "core0", "core1", "core2", "core3", "core4"; + + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + }; + mfgcfg: clock-controller@13fbf000 { compatible = "mediatek,mt8192-mfgcfg"; reg = <0 0x13fbf000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 56749cfe7c33..8ac80a136c37 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -22,6 +22,16 @@ serial0 = &uart0; }; + backlight_lcd0: backlight-lcd0 { + compatible = "pwm-backlight"; + brightness-levels = <0 1023>; + default-brightness-level = <576>; + enable-gpios = <&pio 82 GPIO_ACTIVE_HIGH>; + num-interpolated-steps = <1023>; + pwms = <&disp_pwm0 0 500000>; + power-supply = <&ppvar_sys>; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -212,6 +222,13 @@ }; }; +&disp_pwm0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pin_default>; +}; + &dp_tx { status = "okay"; @@ -238,6 +255,11 @@ }; }; +&gpu { + status = "okay"; + mali-supply = <&mt6315_7_vbuck1>; +}; + &i2c0 { status = "okay"; @@ -648,6 +670,13 @@ }; }; + disp_pwm0_pin_default: disp-pwm0-default-pins { + pins-disp-pwm { + pinmux = <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO97__FUNC_DISP_PWM0>; + }; + }; + dptx_pin: dptx-default-pins { pins-cmd-dat { pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 8f1264d5290b..8652f41403ae 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/pinctrl/mt8195-pinfunc.h> #include <dt-bindings/power/mt8195-power.h> #include <dt-bindings/reset/mt8195-resets.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h> / { compatible = "mediatek,mt8195"; @@ -24,6 +26,22 @@ aliases { gce0 = &gce0; gce1 = &gce1; + ethdr0 = ðdr0; + mutex0 = &mutex; + mutex1 = &mutex1; + merge1 = &merge1; + merge2 = &merge2; + merge3 = &merge3; + merge4 = &merge4; + merge5 = &merge5; + vdo1-rdma0 = &vdo1_rdma0; + vdo1-rdma1 = &vdo1_rdma1; + vdo1-rdma2 = &vdo1_rdma2; + vdo1-rdma3 = &vdo1_rdma3; + vdo1-rdma4 = &vdo1_rdma4; + vdo1-rdma5 = &vdo1_rdma5; + vdo1-rdma6 = &vdo1_rdma6; + vdo1-rdma7 = &vdo1_rdma7; }; cpus { @@ -333,6 +351,76 @@ #performance-domain-cells = <1>; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-390000000 { + opp-hz = /bits/ 64 <390000000>; + opp-microvolt = <625000>; + }; + opp-410000000 { + opp-hz = /bits/ 64 <410000000>; + opp-microvolt = <631250>; + }; + opp-431000000 { + opp-hz = /bits/ 64 <431000000>; + opp-microvolt = <631250>; + }; + opp-473000000 { + opp-hz = /bits/ 64 <473000000>; + opp-microvolt = <637500>; + }; + opp-515000000 { + opp-hz = /bits/ 64 <515000000>; + opp-microvolt = <637500>; + }; + opp-556000000 { + opp-hz = /bits/ 64 <556000000>; + opp-microvolt = <643750>; + }; + opp-598000000 { + opp-hz = /bits/ 64 <598000000>; + opp-microvolt = <650000>; + }; + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-microvolt = <650000>; + }; + opp-670000000 { + opp-hz = /bits/ 64 <670000000>; + opp-microvolt = <662500>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <675000>; + }; + opp-730000000 { + opp-hz = /bits/ 64 <730000000>; + opp-microvolt = <687500>; + }; + opp-760000000 { + opp-hz = /bits/ 64 <760000000>; + opp-microvolt = <700000>; + }; + opp-790000000 { + opp-hz = /bits/ 64 <790000000>; + opp-microvolt = <712500>; + }; + opp-820000000 { + opp-hz = /bits/ 64 <820000000>; + opp-microvolt = <725000>; + }; + opp-850000000 { + opp-hz = /bits/ 64 <850000000>; + opp-microvolt = <737500>; + }; + opp-880000000 { + opp-hz = /bits/ 64 <880000000>; + opp-microvolt = <750000>; + }; + }; + pmu-a55 { compatible = "arm,cortex-a55-pmu"; interrupt-parent = <&gic>; @@ -446,8 +534,9 @@ power-domain@MT8195_POWER_DOMAIN_MFG1 { reg = <MT8195_POWER_DOMAIN_MFG1>; - clocks = <&apmixedsys CLK_APMIXED_MFGPLL>; - clock-names = "mfg"; + clocks = <&apmixedsys CLK_APMIXED_MFGPLL>, + <&topckgen CLK_TOP_MFG_CORE_TMP>; + clock-names = "mfg", "alt"; mediatek,infracfg = <&infracfg_ao>; #address-cells = <1>; #size-cells = <0>; @@ -1018,6 +1107,40 @@ status = "disabled"; }; + lvts_ap: thermal-sensor@1100b000 { + compatible = "mediatek,mt8195-lvts-ap"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>; + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; + nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; + #thermal-sensor-cells = <1>; + }; + + disp_pwm0: pwm@1100e000 { + compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM0>, + <&infracfg_ao CLK_INFRA_AO_DISP_PWM>; + clock-names = "main", "mm"; + status = "disabled"; + }; + + disp_pwm1: pwm@1100f000 { + compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm"; + reg = <0 0x1100f000 0 0x1000>; + interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_DISP_PWM1>, + <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>; + clock-names = "main", "mm"; + status = "disabled"; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8195-spi", "mediatek,mt6765-spi"; @@ -1270,6 +1393,17 @@ status = "disabled"; }; + lvts_mcu: thermal-sensor@11278000 { + compatible = "mediatek,mt8195-lvts-mcu"; + reg = <0 0x11278000 0 0x1000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>; + nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>; + nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2"; + #thermal-sensor-cells = <1>; + }; + xhci1: usb@11290000 { compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci"; @@ -1789,18 +1923,47 @@ status = "disabled"; }; + gpu: gpu@13000000 { + compatible = "mediatek,mt8195-mali", "mediatek,mt8192-mali", + "arm,mali-valhall-jm"; + reg = <0 0x13000000 0 0x4000>; + + clocks = <&mfgcfg CLK_MFG_BG3D>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&spm MT8195_POWER_DOMAIN_MFG2>, + <&spm MT8195_POWER_DOMAIN_MFG3>, + <&spm MT8195_POWER_DOMAIN_MFG4>, + <&spm MT8195_POWER_DOMAIN_MFG5>, + <&spm MT8195_POWER_DOMAIN_MFG6>; + power-domain-names = "core0", "core1", "core2", "core3", "core4"; + status = "disabled"; + }; + mfgcfg: clock-controller@13fbf000 { compatible = "mediatek,mt8195-mfgcfg"; reg = <0 0x13fbf000 0 0x1000>; #clock-cells = <1>; }; - vppsys0: clock-controller@14000000 { - compatible = "mediatek,mt8195-vppsys0"; + vppsys0: syscon@14000000 { + compatible = "mediatek,mt8195-vppsys0", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; }; + mutex@1400f000 { + compatible = "mediatek,mt8195-vpp-mutex"; + reg = <0 0x1400f000 0 0x1000>; + interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MUTEX>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + smi_sub_common_vpp0_vpp1_2x1: smi@14010000 { compatible = "mediatek,mt8195-smi-sub-common"; reg = <0 0x14010000 0 0x1000>; @@ -1900,12 +2063,21 @@ power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>; }; - vppsys1: clock-controller@14f00000 { - compatible = "mediatek,mt8195-vppsys1"; + vppsys1: syscon@14f00000 { + compatible = "mediatek,mt8195-vppsys1", "syscon"; reg = <0 0x14f00000 0 0x1000>; #clock-cells = <1>; }; + mutex@14f01000 { + compatible = "mediatek,mt8195-vpp-mutex"; + reg = <0 0x14f01000 0 0x1000>; + interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + larb5: larb@14f02000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x14f02000 0 0x1000>; @@ -2557,7 +2729,10 @@ vdosys1: syscon@1c100000 { compatible = "mediatek,mt8195-vdosys1", "syscon"; reg = <0 0x1c100000 0 0x1000>; + mboxes = <&gce0 1 CMDQ_THR_PRIO_4>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x0000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; smi_common_vdo: smi@1c01b000 { @@ -2586,6 +2761,17 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; }; + mutex1: mutex@1c101000 { + compatible = "mediatek,mt8195-disp-mutex"; + reg = <0 0x1c101000 0 0x1000>; + reg-names = "vdo1_mutex"; + interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>; + clock-names = "vdo1_mutex"; + mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>; + }; + larb2: larb@1c102000 { compatible = "mediatek,mt8195-smi-larb"; reg = <0 0x1c102000 0 0x1000>; @@ -2610,6 +2796,151 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; }; + vdo1_rdma0: rdma@1c104000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c104000 0 0x1000>; + interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; + }; + + vdo1_rdma1: rdma@1c105000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c105000 0 0x1000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>; + }; + + vdo1_rdma2: rdma@1c106000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c106000 0 0x1000>; + interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>; + }; + + vdo1_rdma3: rdma@1c107000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c107000 0 0x1000>; + interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>; + }; + + vdo1_rdma4: rdma@1c108000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c108000 0 0x1000>; + interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>; + }; + + vdo1_rdma5: rdma@1c109000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c109000 0 0x1000>; + interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>; + }; + + vdo1_rdma6: rdma@1c10a000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c10a000 0 0x1000>; + interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>; + }; + + vdo1_rdma7: rdma@1c10b000 { + compatible = "mediatek,mt8195-vdo1-rdma"; + reg = <0 0x1c10b000 0 0x1000>; + interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>; + }; + + merge1: vpp-merge@1c10c000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10c000 0 0x1000>; + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>, + <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC>; + }; + + merge2: vpp-merge@1c10d000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10d000 0 0x1000>; + interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>, + <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC>; + }; + + merge3: vpp-merge@1c10e000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10e000 0 0x1000>; + interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>, + <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC>; + }; + + merge4: vpp-merge@1c10f000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c10f000 0 0x1000>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>, + <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>; + mediatek,merge-mute = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC>; + }; + + merge5: vpp-merge@1c110000 { + compatible = "mediatek,mt8195-disp-merge"; + reg = <0 0x1c110000 0 0x1000>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>, + <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>; + clock-names = "merge","merge_async"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>; + mediatek,merge-fifo-en = <1>; + resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>; + }; + dp_intf1: dp-intf@1c113000 { compatible = "mediatek,mt8195-dp-intf"; reg = <0 0x1c113000 0 0x1000>; @@ -2622,6 +2953,54 @@ status = "disabled"; }; + ethdr0: hdr-engine@1c114000 { + compatible = "mediatek,mt8195-disp-ethdr"; + reg = <0 0x1c114000 0 0x1000>, + <0 0x1c115000 0 0x1000>, + <0 0x1c117000 0 0x1000>, + <0 0x1c119000 0 0x1000>, + <0 0x1c11a000 0 0x1000>, + <0 0x1c11b000 0 0x1000>, + <0 0x1c11c000 0 0x1000>; + reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds"; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>, + <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>; + clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE>, + <&vdosys1 CLK_VDO1_26M_SLOW>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>, + <&topckgen CLK_TOP_ETHDR>; + clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1", + "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async", + "gfx_fe0_async", "gfx_fe1_async","vdo_be_async", + "ethdr_top"; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; + iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>, + <&iommu_vpp M4U_PORT_L3_HDR_ADL>; + interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */ + resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>, + <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>; + reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async", + "gfx_fe1_async", "vdo_be_async"; + }; + edp_tx: edp-tx@1c500000 { compatible = "mediatek,mt8195-edp-tx"; reg = <0 0x1c500000 0 0x8000>; @@ -2644,4 +3023,246 @@ status = "disabled"; }; }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>; + + trips { + cpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU1>; + + trips { + cpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU2>; + + trips { + cpu2_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU3>; + + trips { + cpu3_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU0>; + + trips { + cpu4_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU1>; + + trips { + cpu5_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU2>; + + trips { + cpu6_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU3>; + + trips { + cpu7_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts new file mode 100644 index 000000000000..ceb48eb1a6e6 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021-2022 BayLibre, SAS. + * Authors: + * Fabien Parent <fparent@baylibre.com> + * Bernhard Rosenkränzer <bero@baylibre.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h> +#include "mt8365.dtsi" + +/ { + model = "MediaTek MT8365 Open Platform EVK"; + compatible = "mediatek,mt8365-evk", "mediatek,mt8365"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + key-volume-up { + gpios = <&pio 24 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0xc0000000>; + }; + + usb_otg_vbus: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@43000000 { + no-map; + reg = <0 0x43000000 0 0x30000>; + }; + + /* 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pio { + gpio_keys: gpio-keys-pins { + pins { + pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <MT8365_PIN_57_SDA0__FUNC_SDA0_0>, + <MT8365_PIN_58_SCL0__FUNC_SCL0_0>; + bias-pull-up; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>, + <MT8365_PIN_36_UTXD0__FUNC_UTXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>, + <MT8365_PIN_38_UTXD1__FUNC_UTXD1>; + }; + }; + + uart2_pins: uart2-pins { + pins { + pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>, + <MT8365_PIN_40_UTXD2__FUNC_UTXD2>; + }; + }; + + usb_pins: usb-pins { + id-pins { + pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>; + input-enable; + bias-pull-up; + }; + + usb0-vbus-pins { + pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>; + output-high; + }; + + usb1-vbus-pins { + pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>; + output-high; + }; + }; + + pwm_pins: pwm-pins { + pins { + pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>, + <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>; + }; + }; +}; + +&pwm { + pinctrl-0 = <&pwm_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi new file mode 100644 index 000000000000..1f6b48359115 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -0,0 +1,488 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * (C) 2018 MediaTek Inc. + * Copyright (C) 2022 BayLibre SAS + * Fabien Parent <fparent@baylibre.com> + * Bernhard Rosenkränzer <bero@baylibre.com> + */ +#include <dt-bindings/clock/mediatek,mt8365-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> + +/ { + compatible = "mediatek,mt8365"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + #cooling-cells = <2>; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + cache-unified; + }; + }; + + clk26m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x10000>, /* GICD */ + <0 0x0c080000 0 0x80000>, /* GICR */ + <0 0x0c400000 0 0x2000>, /* GICC */ + <0 0x0c410000 0 0x1000>, /* GICH */ + <0 0x0c420000 0 0x2000>; /* GICV */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8365-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt8365-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8365-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + syscfg_pctl: syscfg-pctl@10005000 { + compatible = "mediatek,mt8365-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@1000b000 { + compatible = "mediatek,mt8365-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8365-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8365-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_IFR_PWRAP_SPI>, + <&infracfg CLK_IFR_PMIC_AP>, + <&infracfg CLK_IFR_PWRAP_SYS>, + <&infracfg CLK_IFR_PWRAP_TMR>; + clock-names = "spi", "wrap", "sys", "tmr"; + }; + + keypad: keypad@10010000 { + compatible = "mediatek,mt6779-keypad"; + reg = <0 0x10010000 0 0x1000>; + wakeup-source; + interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk26m>; + clock-names = "kpd"; + status = "disabled"; + }; + + mcucfg: syscon@10200000 { + compatible = "mediatek,mt8365-mcucfg", "syscon"; + reg = <0 0x10200000 0 0x2000>; + #clock-cells = <1>; + }; + + sysirq: interrupt-controller@10200a80 { + compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200a80 0 0x20>; + }; + + infracfg_nao: infracfg@1020e000 { + compatible = "mediatek,mt8365-infracfg", "syscon"; + reg = <0 0x1020e000 0 0x1000>; + #clock-cells = <1>; + }; + + rng: rng@1020f000 { + compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng"; + reg = <0 0x1020f000 0 0x100>; + clocks = <&infracfg CLK_IFR_TRNG>; + clock-names = "rng"; + }; + + apdma: dma-controller@11000280 { + compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma"; + reg = <0 0x11000280 0 0x80>, + <0 0x11000300 0 0x80>, + <0 0x11000380 0 0x80>, + <0 0x11000400 0 0x80>, + <0 0x11000580 0 0x80>, + <0 0x11000600 0 0x80>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; + dma-requests = <6>; + clocks = <&infracfg CLK_IFR_AP_DMA>; + clock-names = "apdma"; + #dma-cells = <1>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>; + clock-names = "baud", "bus"; + dmas = <&apdma 0>, <&apdma 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>; + clock-names = "baud", "bus"; + dmas = <&apdma 2>, <&apdma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>; + clock-names = "baud", "bus"; + dmas = <&apdma 4>, <&apdma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + pwm: pwm@11006000 { + compatible = "mediatek,mt8365-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_IFR_PWM_HCLK>, + <&infracfg CLK_IFR_PWM>, + <&infracfg CLK_IFR_PWM1>, + <&infracfg CLK_IFR_PWM2>, + <&infracfg CLK_IFR_PWM3>; + clock-names = "top", "main", "pwm1", "pwm2", "pwm3"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@11008000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi: spi@1100a000 { + compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi"; + reg = <0 0x1100a000 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>, + <&topckgen CLK_TOP_SPI_SEL>, + <&infracfg CLK_IFR_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c"; + reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>; + clock-div = <1>; + clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssusb: usb@11201000 { + compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3"; + reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u2port1 PHY_TYPE_USB2>; + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>, + <&infracfg CLK_IFR_SSUSB_REF>, + <&infracfg CLK_IFR_SSUSB_SYS>, + <&infracfg CLK_IFR_ICUSB>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host: usb@11200000 { + compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>, + <&infracfg CLK_IFR_SSUSB_REF>, + <&infracfg CLK_IFR_SSUSB_SYS>, + <&infracfg CLK_IFR_ICUSB>, + <&infracfg CLK_IFR_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck", + "dma_ck", "xhci_ck"; + status = "disabled"; + }; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x1000>, + <0 0x11cd0000 0 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>, + <&infracfg CLK_IFR_MSDC0_HCLK>, + <&infracfg CLK_IFR_MSDC0_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11c90000 0 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>, + <&infracfg CLK_IFR_MSDC1_HCLK>, + <&infracfg CLK_IFR_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + status = "disabled"; + }; + + mmc2: mmc@11250000 { + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11250000 0 0x1000>, + <0 0x11c60000 0 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>, + <&infracfg CLK_IFR_MSDC2_HCLK>, + <&infracfg CLK_IFR_MSDC2_SRC>, + <&infracfg CLK_IFR_MSDC2_BK>, + <&infracfg CLK_IFR_AP_MSDC0>; + clock-names = "source", "hclk", "source_cg", + "bus_clk", "sys_cg"; + status = "disabled"; + }; + + ethernet: ethernet@112a0000 { + compatible = "mediatek,mt8365-eth"; + reg = <0 0x112a0000 0 0x1000>; + mediatek,pericfg = <&infracfg>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <&infracfg CLK_IFR_NIC_AXI>, + <&infracfg CLK_IFR_NIC_SLV_AXI>; + clock-names = "core", "reg", "trans"; + status = "disabled"; + }; + + u3phy: t-phy@11cc0000 { + compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11cc0000 0x9000>; + + u2port0: usb-phy@0 { + reg = <0x0 0x400>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>, + <&topckgen CLK_TOP_USB20_48M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u2port1: usb-phy@1000 { + reg = <0x1000 0x400>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>, + <&topckgen CLK_TOP_USB20_48M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8365-systimer", "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x100>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&system_clk>; + clock-names = "clk13m"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index bc34c9d8846a..1406d5d40b8f 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -9,6 +9,7 @@ DTC_FLAGS_tegra194-p2972-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@ DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@ DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@ +DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@ dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb @@ -24,3 +25,4 @@ dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index c017764bc27e..8b78be8f4f9d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -338,9 +338,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTA>; - clock-names = "serial"; resets = <&tegra_car 6>; - reset-names = "serial"; dmas = <&apbdma 8>, <&apbdma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -352,9 +350,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTB>; - clock-names = "serial"; resets = <&tegra_car 7>; - reset-names = "serial"; dmas = <&apbdma 9>, <&apbdma 9>; dma-names = "rx", "tx"; status = "disabled"; @@ -366,9 +362,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTC>; - clock-names = "serial"; resets = <&tegra_car 55>; - reset-names = "serial"; dmas = <&apbdma 10>, <&apbdma 10>; dma-names = "rx", "tx"; status = "disabled"; @@ -380,9 +374,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_UARTD>; - clock-names = "serial"; resets = <&tegra_car 65>; - reset-names = "serial"; dmas = <&apbdma 19>, <&apbdma 19>; dma-names = "rx", "tx"; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index a4264ea41728..e2d6857a3709 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -145,6 +145,7 @@ /* SDMMC3 (SDIO) */ mmc@3440000 { status = "okay"; + vqmmc-supply = <&vddio_sdmmc3>; }; /* SDMMC4 (eMMC) */ diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index efc450821398..7e4c496fd91c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -610,9 +610,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_UARTA>; - clock-names = "serial"; resets = <&bpmp TEGRA186_RESET_UARTA>; - reset-names = "serial"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 7096b999b33f..154fc8c0eb6d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -745,9 +745,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTA>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTA>; - reset-names = "serial"; status = "disabled"; }; @@ -757,9 +755,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_UARTB>; - clock-names = "serial"; resets = <&bpmp TEGRA194_RESET_UARTB>; - reset-names = "serial"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 980565bf02c9..0e463b3cbe01 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -618,9 +618,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTA>; - clock-names = "serial"; resets = <&tegra_car 6>; - reset-names = "serial"; dmas = <&apbdma 8>, <&apbdma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -632,9 +630,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTB>; - clock-names = "serial"; resets = <&tegra_car 7>; - reset-names = "serial"; dmas = <&apbdma 9>, <&apbdma 9>; dma-names = "rx", "tx"; status = "disabled"; @@ -646,9 +642,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTC>; - clock-names = "serial"; resets = <&tegra_car 55>; - reset-names = "serial"; dmas = <&apbdma 10>, <&apbdma 10>; dma-names = "rx", "tx"; status = "disabled"; @@ -660,9 +654,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_UARTD>; - clock-names = "serial"; resets = <&tegra_car 65>; - reset-names = "serial"; dmas = <&apbdma 19>, <&apbdma 19>; dma-names = "rx", "tx"; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index 8a9747855d6b..caa9e952a149 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -3,6 +3,7 @@ #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/sound/rt5640.h> #include "tegra234-p3701-0000.dtsi" #include "tegra234-p3737-0000.dtsi" @@ -49,7 +50,7 @@ i2s1_dap: endpoint { dai-format = "i2s"; - /* placeholder for external codec */ + remote-endpoint = <&rt5640_ep>; }; }; }; @@ -2017,6 +2018,30 @@ status = "okay"; }; + i2c@31e0000 { + status = "okay"; + + audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>; + clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; + clock-names = "mclk"; + realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>; + realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>; + realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>; + sound-name-prefix = "CVB-RT"; + + port { + rt5640_ep: endpoint { + remote-endpoint = <&i2s1_dap>; + mclk-fs = <256>; + }; + }; + }; + }; + pwm@32a0000 { assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; @@ -2073,11 +2098,21 @@ usb2-0 { mode = "host"; status = "okay"; + port { + hs_typec_p1: endpoint { + remote-endpoint = <&hs_ucsi_ccg_p1>; + }; + }; }; usb2-1 { mode = "host"; status = "okay"; + port { + hs_typec_p0: endpoint { + remote-endpoint = <&hs_ucsi_ccg_p0>; + }; + }; }; usb2-2 { @@ -2093,11 +2128,21 @@ usb3-0 { nvidia,usb2-companion = <1>; status = "okay"; + port { + ss_typec_p0: endpoint { + remote-endpoint = <&ss_ucsi_ccg_p0>; + }; + }; }; usb3-1 { nvidia,usb2-companion = <0>; status = "okay"; + port { + ss_typec_p1: endpoint { + remote-endpoint = <&ss_ucsi_ccg_p1>; + }; + }; }; usb3-2 { @@ -2190,6 +2235,64 @@ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", "p2u-5", "p2u-6", "p2u-7"; }; + + i2c@c240000 { + status = "okay"; + typec@8 { + compatible = "cypress,cypd4226"; + reg = <0x08>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>; + firmware-name = "nvidia,jetson-agx-xavier"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + ccg_typec_con0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "USB-C"; + data-role = "host"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ucsi_ccg_p0: endpoint { + remote-endpoint = <&hs_typec_p0>; + }; + }; + port@1 { + reg = <1>; + ss_ucsi_ccg_p0: endpoint { + remote-endpoint = <&ss_typec_p0>; + }; + }; + }; + }; + ccg_typec_con1: connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "USB-C"; + data-role = "dual"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + hs_ucsi_ccg_p1: endpoint { + remote-endpoint = <&hs_typec_p1>; + }; + }; + port@1 { + reg = <1>; + ss_ucsi_ccg_p1: endpoint { + remote-endpoint = <&ss_typec_p1>; + }; + }; + }; + }; + }; + }; }; gpio-keys { @@ -2293,5 +2396,23 @@ <&dmic3_port>; label = "NVIDIA Jetson AGX Orin APE"; + + widgets = "Microphone", "CVB-RT MIC Jack", + "Microphone", "CVB-RT MIC", + "Headphone", "CVB-RT HP Jack", + "Speaker", "CVB-RT SPK"; + + routing = /* I2S1 <-> RT5640 */ + "CVB-RT AIF1 Playback", "I2S1 DAP-Playback", + "I2S1 DAP-Capture", "CVB-RT AIF1 Capture", + /* RT5640 codec controls */ + "CVB-RT HP Jack", "CVB-RT HPOL", + "CVB-RT HP Jack", "CVB-RT HPOR", + "CVB-RT IN1P", "CVB-RT MIC Jack", + "CVB-RT IN2P", "CVB-RT MIC Jack", + "CVB-RT SPK", "CVB-RT SPOLP", + "CVB-RT SPK", "CVB-RT SPORP", + "CVB-RT DMIC1", "CVB-RT MIC", + "CVB-RT DMIC2", "CVB-RT MIC"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi new file mode 100644 index 000000000000..baf4f69e410d --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234-p3767.dtsi" + +/ { + compatible = "nvidia,p3767-0000", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin NX"; + + bus@0 { + hda@3510000 { + nvidia,model = "NVIDIA Jetson Orin NX HDA"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi new file mode 100644 index 000000000000..bd60478fa75e --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra234.dtsi" + +/ { + compatible = "nvidia,p3767", "nvidia,tegra234"; + + bus@0 { + i2c@3160000 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + label = "module"; + vcc-supply = <&vdd_1v8_hs>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + spi@3270000 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <136000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; + }; + + /* + * This only exists on Jetson Orin Nano Developer Kit (SKU 5) + * but UEFI needs this and will remove it on devices where it + * doesn't exist. + */ + mmc@3400000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + disable-wp; + }; + + hda@3510000 { + status = "okay"; + }; + + padctl@3520000 { + vclamp-usb-supply = <&vdd_1v8_ao>; + avdd-usb-supply = <&vdd_3v3_ao>; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + vdd_5v0_sys: regulator-vdd-5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_1v8_hs: regulator-vdd-1v8-hs { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v8_ao: regulator-vdd-1v8-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_ao: regulator-vdd-3v3-ao { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <33000000>; + regulator-max-microvolt = <33000000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + thermal-zones { + /* + * This monitoring is far from optimal, but it's good enough + * at this stage. + */ + cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <1000>; + status = "okay"; + + trips { + critical { + temperature = <104500>; + hysteresis = <0>; + type = "critical"; + }; + + hot { + temperature = <99000>; + hysteresis = <1000>; + type = "hot"; + }; + + board_trip_passive: passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + board_trip_active2: active-2 { + temperature = <80000>; + hysteresis = <4000>; + type = "active"; + }; + + board_trip_active1: active-1 { + temperature = <65000>; + hysteresis = <4000>; + type = "active"; + }; + + board_trip_active0: active-0 { + temperature = <50000>; + hysteresis = <4000>; + type = "active"; + }; + }; + + cooling-maps { + passive { + cooling-device = <&fan 3 3>; + trip = <&board_trip_passive>; + }; + + active2 { + cooling-device = <&fan 2 3>; + trip = <&board_trip_active2>; + }; + + active1 { + cooling-device = <&fan 1 2>; + trip = <&board_trip_active1>; + }; + + active0 { + cooling-device = <&fan 0 1>; + trip = <&board_trip_active0>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts new file mode 100644 index 000000000000..7dfbc38eb3c4 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +#include "tegra234-p3767-0000.dtsi" +#include "tegra234-p3768-0000.dtsi" + +/ { + compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234"; + model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit"; + + aliases { + serial0 = &tcu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + serial@31d0000 { + current-speed = <115200>; + status = "okay"; + }; + + pwm@32a0000 { + assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + status = "okay"; + }; + + hda@3510000 { + nvidia,model = "NVIDIA Jetson Orin NX HDA"; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + }; + + /* C1 - M.2 Key-E */ + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + /* C4 - M.2 Key-M */ + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + /* C8 - Ethernet */ + pcie@140a0000 { + status = "okay"; + + num-lanes = <2>; + + phys = <&p2u_gbe_2>, <&p2u_gbe_3>; + phy-names = "p2u-0", "p2u-1"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + }; + + /* C7 - M.2 Key-M */ + pcie@141e0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_gbe_0>, <&p2u_gbe_1>; + phy-names = "p2u-0", "p2u-1"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + }; + + key-power { + label = "Power"; + gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-suspend { + label = "Suspend"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm3 0 45334>; + cooling-levels = <0 95 178 255>; + #cooling-cells = <2>; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + serial { + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi new file mode 100644 index 000000000000..aee21428e1a5 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + compatible = "nvidia,p3768-0000"; + + aliases { + serial0 = &tcu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + i2c@3160000 { + status = "okay"; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + label = "system"; + vcc-supply = <&vdd_1v8_sys>; + address-width = <8>; + pagesize = <8>; + size = <256>; + read-only; + }; + }; + + serial@31d0000 { + current-speed = <115200>; + status = "okay"; + }; + + pwm@32a0000 { + assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>; + assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + }; + + ports { + /* recovery port */ + usb2-0 { + mode = "otg"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + usb-role-switch; + }; + + /* hub */ + usb2-1 { + mode = "host"; + vbus-supply = <&vdd_1v1_hub>; + status = "okay"; + }; + + /* M.2 Key-E */ + usb2-2 { + mode = "host"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + + /* hub */ + usb3-0 { + nvidia,usb2-companion = <1>; + status = "okay"; + }; + + /* J5 */ + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + }; + }; + + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb3-1"; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>; + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", + "usb3-1"; + }; + + /* C1 - M.2 Key-E */ + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_3>; + phy-names = "p2u-0"; + }; + + /* C4 - M.2 Key-M */ + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>, + <&p2u_hsio_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + /* C8 - Ethernet */ + pcie@140a0000 { + status = "okay"; + + num-lanes = <2>; + + phys = <&p2u_gbe_2>, <&p2u_gbe_3>; + phy-names = "p2u-0", "p2u-1"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + }; + + /* C7 - M.2 Key-M */ + pcie@141e0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8_ao>; + + phys = <&p2u_gbe_0>, <&p2u_gbe_1>; + phy-names = "p2u-0", "p2u-1"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <BTN_1>; + }; + + key-power { + label = "Power"; + gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-suspend { + label = "Suspend"; + gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm3 0 45334>; + cooling-levels = <0 95 178 255>; + #cooling-cells = <2>; + }; + + vdd_1v8_sys: regulator-vdd-1v8-sys { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_SYS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdd_1v1_hub: regulator-vdd-1v1-hub { + compatible = "regulator-fixed"; + regulator-name = "VDD_AV10_HUB"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vdd_5v0_sys>; + regulator-always-on; + }; + + vdd_3v3_pcie: regulator-vdd-3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_PCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + serial { + status = "okay"; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index f1748cff8a33..5d354f8923b4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -676,9 +676,7 @@ reg = <0x0 0x03100000 0x0 0x10000>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_UARTA>; - clock-names = "serial"; resets = <&bpmp TEGRA234_RESET_UARTA>; - reset-names = "serial"; status = "disabled"; }; @@ -3402,6 +3400,24 @@ }; }; + dsu-pmu0 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu0_0>, <&cpu0_1>, <&cpu0_2>, <&cpu0_3>; + }; + + dsu-pmu1 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu1_0>, <&cpu1_1>, <&cpu1_2>, <&cpu1_3>; + }; + + dsu-pmu2 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>; + cpus = <&cpu2_0>, <&cpu2_1>, <&cpu2_2>, <&cpu2_3>; + }; + pmu { compatible = "arm,cortex-a78-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 31aa54f0428c..d42c59572ace 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -3,10 +3,13 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-mi01.2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp468.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-al02-c7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb @@ -28,6 +31,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb @@ -69,12 +73,15 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb @@ -83,9 +90,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r4.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r0.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown-r1.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-kingoftown.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb @@ -100,10 +105,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-r9.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r4.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r5.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-limozeen-nots-r9.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb @@ -118,8 +119,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-quackingstick-r0-lte.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb -dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb @@ -177,6 +176,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6115p-lenovo-j606f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb @@ -189,7 +189,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb -dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb @@ -200,3 +201,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index c52d79a55d80..59860a2223b8 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -325,12 +325,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; - - firmware-name = "qcom/apq8016/wcnss.mbn"; -}; - &sdhc_1 { status = "okay"; @@ -411,10 +405,19 @@ qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; +&wcnss { + status = "okay"; + firmware-name = "qcom/apq8016/wcnss.mbn"; +}; + &wcnss_ctrl { firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; }; +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + /* Enable CoreSight */ &cti0 { status = "okay"; }; &cti1 { status = "okay"; }; @@ -726,7 +729,6 @@ function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; @@ -767,7 +769,6 @@ function = "gpio"; drive-strength = <8>; - input-enable; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index fe6c415e8229..b599909c4463 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -63,7 +63,6 @@ }; clocks { - compatible = "simple-bus"; divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -146,7 +145,6 @@ &blsp1_spi1 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -183,7 +181,6 @@ &blsp2_spi6 { /* On High speed expansion */ - label = "HS-SPI1"; status = "okay"; }; @@ -706,8 +703,7 @@ &pmi8994_spmi_regulators { vdd_s2-supply = <&vph_pwr>; - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -974,6 +970,50 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; @@ -1026,7 +1066,7 @@ platform { sound-dai = <&q6routing>; - }; + }; codec { sound-dai = <&wcd9335 AIF4_PB>; @@ -1095,21 +1135,8 @@ vdda-phy-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; - }; &venus { status = "okay"; }; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts new file mode 100644 index 000000000000..3af1d5556950 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-mi01.2.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 AP-MI01.2 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2"; + compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + i2c_1_pins: i2c-1-state { + pins = "gpio29", "gpio30"; + function = "blsp1_i2c0"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts new file mode 100644 index 000000000000..3b6a5cb8bf07 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 RDP468 board device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq5332.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6"; + compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332"; + + aliases { + serial0 = &blsp1_uart0; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&blsp1_uart0 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&sdhc { + bus-width = <4>; + max-frequency = <192000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&xo_board { + clock-frequency = <24000000>; +}; + +/* PINCTRL */ + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio13"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio12"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + spi_0_data_clk_pins: spi-0-data-clk-state { + pins = "gpio14", "gpio15", "gpio16"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-down; + }; + + spi_0_cs_pins: spi-0-cs-state { + pins = "gpio17"; + function = "blsp0_spi"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi new file mode 100644 index 000000000000..12e0e179e139 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * IPQ5332 device tree source + * + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/clock/qcom,ipq5332-gcc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq5332", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + clock-latency-ns = <200000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_mem: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x200000>; + no-map; + }; + + smem@4a800000 { + compatible = "qcom,smem"; + reg = <0x0 0x4a800000 0x0 0x00100000>; + no-map; + + hwlocks = <&tcsr_mutex 0>; + }; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng: rng@e3000 { + compatible = "qcom,prng-ee"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq5332-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 53>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_0_pins: serial0-state { + pins = "gpio18", "gpio19"; + function = "blsp0_uart0"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq5332-gcc"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&xo_board>, + <&sleep_clk>, + <0>, + <0>, + <0>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq5332", "syscon"; + reg = <0x01937000 0x21000>; + }; + + sdhc: mmc@7804000 { + compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + + interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; + clock-names = "iface", "core", "xo"; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi0: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_i2c1: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + blsp1_spi2: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + watchdog: watchdog@b017000 { + compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + timeout-sec = <30>; + }; + + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5332-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board>; + clock-names = "pll", "xo"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5332-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index 2aee8594b280..f5f4827c0e17 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -35,7 +35,6 @@ }; &blsp1_spi1 { - cs-select = <0>; pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index bbd94025ff5d..9ff4e9d45065 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -738,8 +738,8 @@ phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>, - <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>; + ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, + <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 62d05d740646..84e715aa4310 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -397,7 +397,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sdhc_1: mmc@7824900 { @@ -687,7 +686,8 @@ }; apcs_glb: mailbox@b111000 { - compatible = "qcom,ipq8074-apcs-apps-global"; + compatible = "qcom,ipq8074-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; clocks = <&a53pll>, <&xo>; clock-names = "pll", "xo"; @@ -780,10 +780,8 @@ phys = <&pcie_phy1>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x10200000 0x10200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x10220000 0x10220000 - 0 0xfde0000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -844,10 +842,8 @@ phys = <&pcie_phy0>; phy-names = "pciephy"; - ranges = <0x81000000 0 0x20200000 0x20200000 - 0 0x10000>, /* downstream I/O */ - <0x82000000 0 0x20220000 0x20220000 - 0 0xfde0000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts new file mode 100644 index 000000000000..2c8430197ec0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 AL02-C7 board device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi new file mode 100644 index 000000000000..3bb7435f5e7f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 SoC device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h> + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk { + compatible = "fixed-clock"; + clock-frequency = <353000000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x40000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a73-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz_region: tz@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq9574-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 65>; + interrupt-controller; + #interrupt-cells = <2>; + + uart2_pins: uart2-state { + pins = "gpio34", "gpio35"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,ipq9574-gcc"; + reg = <0x01800000 0x80000>; + clocks = <&xo_board_clk>, + <&sleep_clk>, + <&bias_pll_ubi_nc_clk>, + <0>, + <0>, + <0>, + <0>, + <0>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + sdhc_1: mmc@7804000 { + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board_clk>; + clock-names = "iface", "core", "xo"; + non-removable; + status = "disabled"; + }; + + blsp1_uart2: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, /* GICD */ + <0x0b002000 0x1000>, /* GICC */ + <0x0b001000 0x1000>, /* GICH */ + <0x0b004000 0x1000>; /* GICV */ + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0 0x0b00c000 0x3000>; + + v2m0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00000000 0xffd>; + msi-controller; + }; + + v2m1: v2m@1000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00001000 0xffd>; + msi-controller; + }; + + v2m2: v2m@2000 { + compatible = "arm,gic-v2m-frame"; + reg = <0x00002000 0xffd>; + msi-controller; + }; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b120000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index ed3fa7b3575b..13cd9ad167df 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -118,10 +118,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; @@ -149,6 +145,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index 701a5585d77e..fecb69944cfa 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -160,10 +160,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -191,6 +187,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index 3618704a5330..91284a1d0966 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -128,10 +128,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -159,6 +155,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts index a0e520edde02..525ec76efeeb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts @@ -118,10 +118,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; @@ -149,6 +145,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts index 8c07eca900d3..5b1bac8f5122 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts @@ -227,10 +227,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -312,6 +308,14 @@ qcom,hphl-jack-type-normally-open; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index d1e8cf2f50c0..f1dd625e1822 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -231,10 +231,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -263,6 +259,14 @@ extcon = <&pm8916_usbin>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 3899e11b9843..b79e80913af9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -99,10 +99,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -130,6 +126,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi index 8cac23b5240c..6eb5e0a39510 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi @@ -20,17 +20,6 @@ pll-supply = <&pm8916_l7>; }; -&pronto { - vddpx-supply = <&pm8916_l7>; - - iris { - vddxo-supply = <&pm8916_l7>; - vddrfa-supply = <&pm8916_s3>; - vddpa-supply = <&pm8916_l9>; - vdddig-supply = <&pm8916_l5>; - }; -}; - &sdhc_1 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -46,6 +35,17 @@ v3p3-supply = <&pm8916_l13>; }; +&wcnss { + vddpx-supply = <&pm8916_l7>; +}; + +&wcnss_iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; +}; + &rpm_requests { smd_rpm_regulators: regulators { compatible = "qcom,rpm-pm8916-regulators"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index a2ed7bdbf528..16d67749960e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -252,10 +252,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index c691cca2eb45..a1ca4d883420 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -112,6 +112,14 @@ status = "okay"; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &msmgpio { panel_vdd3_default: panel-vdd3-default-state { pins = "gpio9"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 3dd819458785..4e10b8a5e9f9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -54,12 +54,6 @@ status = "okay"; }; -&pronto { - iris { - compatible = "qcom,wcn3660b"; - }; -}; - &touchkey { vcc-supply = <®_touch_key>; vdd-supply = <®_touch_key>; @@ -69,6 +63,14 @@ status = "okay"; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &msmgpio { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index c95f0b4bc61f..f6c4a011fdfd 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -58,6 +58,14 @@ vdd-supply = <®_touch_key>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &msmgpio { tkey_en_default: tkey-en-default-state { pins = "gpio97"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index d920b7247d82..74ffd04db8d8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -125,14 +125,6 @@ status = "okay"; }; -&pronto { - status = "okay"; - - iris { - compatible = "qcom,wcn3660b"; - }; -}; - &sdhc_1 { pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; @@ -162,6 +154,14 @@ extcon = <&pm8916_usbin>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index f3b81b6f0a2f..adeee0830e76 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -93,10 +93,6 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -124,6 +120,14 @@ extcon = <&muic>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index d4984b3af802..1a41a4db874d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -272,14 +272,6 @@ status = "okay"; }; -&pronto { - status = "okay"; - - iris { - compatible = "qcom,wcn3660b"; - }; -}; - &sdhc_1 { status = "okay"; @@ -320,6 +312,14 @@ extcon = <&muic>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 8433c9710b1c..978f0abcdf8f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -44,18 +44,21 @@ sim_ctrl_default: sim-ctrl-default-state { esim-sel-pins { pins = "gpio0", "gpio3"; + function = "gpio"; bias-disable; output-low; }; sim-en-pins { pins = "gpio1"; + function = "gpio"; bias-disable; output-low; }; sim-sel-pins { pins = "gpio2"; + function = "gpio"; bias-disable; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi index cdf34b74fa8f..50bae6f214f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi @@ -99,10 +99,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; @@ -122,6 +118,14 @@ extcon = <&pm8916_usbin>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index a87be1d95b14..ac56c7595f78 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -153,10 +153,6 @@ status = "okay"; }; -&pronto { - status = "okay"; -}; - &sdhc_1 { status = "okay"; @@ -184,6 +180,14 @@ extcon = <&usb_id>; }; +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts new file mode 100644 index 000000000000..74ce6563be18 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-ufi.dtsi" + +/ { + model = "uz801 v3.0 4G Modem Stick"; + compatible = "yiming,uz801-v3", "qcom,msm8916"; +}; + +&button_restart { + gpios = <&msmgpio 23 GPIO_ACTIVE_LOW>; +}; + +&led_r { + gpios = <&msmgpio 7 GPIO_ACTIVE_HIGH>; +}; + +&led_g { + gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; +}; + +&led_b { + gpios = <&msmgpio 6 GPIO_ACTIVE_HIGH>; +}; + +&button_default { + pins = "gpio23"; + bias-pull-up; +}; + +&gpio_leds_default { + pins = "gpio6", "gpio7", "gpio8"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 0733c2f4f379..7e0fa37a3adf 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -503,7 +503,7 @@ bits = <1 7>; }; - tsens_mode: mode@ec { + tsens_mode: mode@ef { reg = <0xef 0x1>; bits = <5 3>; }; @@ -1870,7 +1870,7 @@ }; }; - pronto: remoteproc@a21b000 { + wcnss: remoteproc@a21b000 { compatible = "qcom,pronto-v2-pil", "qcom,pronto"; reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; reg-names = "ccu", "dxe", "pmu"; @@ -1896,9 +1896,8 @@ status = "disabled"; - iris { - compatible = "qcom,wcn3620"; - + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ clocks = <&rpmcc RPM_SMD_RF_CLK2>; clock-names = "xo"; }; @@ -1916,13 +1915,13 @@ compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; - qcom,mmio = <&pronto>; + qcom,mmio = <&wcnss>; - bluetooth { + wcnss_bt: bluetooth { compatible = "qcom,wcnss-bt"; }; - wifi { + wcnss_wifi: wifi { compatible = "qcom,wcnss-wlan"; interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, @@ -2180,7 +2179,6 @@ }; }; }; - }; timer { diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index 610f3e3fc0c2..602cb188a635 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -2,9 +2,13 @@ /* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ #include <dt-bindings/clock/qcom,gcc-msm8953.h> +#include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/thermal/thermal.h> / { @@ -269,7 +273,7 @@ compatible = "qcom,rpm-msm8953"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; @@ -281,9 +285,6 @@ #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; - clocks = <&xo_board>; - clock-names = "ref"; - rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; @@ -328,6 +329,80 @@ }; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + smp2p_wcnss_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_wcnss_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + smsm { compatible = "qcom,smsm"; @@ -342,6 +417,22 @@ #qcom,smem-state-cells = <1>; }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; }; soc: soc@0 { @@ -352,12 +443,12 @@ rpm_msg_ram: sram@60000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x60000 0x8000>; + reg = <0x00060000 0x8000>; }; hsusb_phy: phy@79000 { compatible = "qcom,msm8953-qusb2-phy"; - reg = <0x79000 0x180>; + reg = <0x00079000 0x180>; #phy-cells = <0>; clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, @@ -380,8 +471,8 @@ tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <16>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; @@ -391,12 +482,12 @@ restart@4ab000 { compatible = "qcom,pshold"; - reg = <0x4ab000 0x4>; + reg = <0x004ab000 0x4>; }; tlmm: pinctrl@1000000 { compatible = "qcom,msm8953-pinctrl"; - reg = <0x1000000 0x300000>; + reg = <0x01000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 142>; @@ -632,20 +723,51 @@ drive-strength = <2>; bias-disable; }; + + wcnss_pin_a: wcnss-active-state { + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1800000 { compatible = "qcom,gcc-msm8953"; - reg = <0x1800000 0x80000>; + reg = <0x01800000 0x80000>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clocks = <&xo_board>, + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>, - <0>, - <0>, - <0>, - <0>; + <&dsi0_phy 1>, + <&dsi0_phy 0>, + <&dsi1_phy 1>, + <&dsi1_phy 0>; clock-names = "xo", "sleep", "dsi0pll", @@ -656,25 +778,25 @@ tcsr_mutex: hwlock@1905000 { compatible = "qcom,tcsr-mutex"; - reg = <0x1905000 0x20000>; + reg = <0x01905000 0x20000>; #hwlock-cells = <1>; }; tcsr: syscon@1937000 { compatible = "qcom,tcsr-msm8953", "syscon"; - reg = <0x1937000 0x30000>; + reg = <0x01937000 0x30000>; }; tcsr_phy_clk_scheme_sel: syscon@193f044 { compatible = "qcom,tcsr-msm8953", "syscon"; - reg = <0x193f044 0x4>; + reg = <0x0193f044 0x4>; }; mdss: display-subsystem@1a00000 { compatible = "qcom,mdss"; - reg = <0x1a00000 0x1000>, - <0x1ab0000 0x1040>; + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x1040>; reg-names = "mdss_phys", "vbif_phys"; @@ -701,7 +823,7 @@ mdp: display-controller@1a01000 { compatible = "qcom,msm8953-mdp5", "qcom,mdp5"; - reg = <0x1a01000 0x89000>; + reg = <0x01a01000 0x89000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; @@ -742,7 +864,7 @@ dsi0: dsi@1a94000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; - reg = <0x1a94000 0x400>; + reg = <0x01a94000 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -794,9 +916,9 @@ dsi0_phy: phy@1a94400 { compatible = "qcom,dsi-phy-14nm-8953"; - reg = <0x1a94400 0x100>, - <0x1a94500 0x300>, - <0x1a94800 0x188>; + reg = <0x01a94400 0x100>, + <0x01a94500 0x300>, + <0x01a94800 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -804,7 +926,7 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; @@ -812,7 +934,7 @@ dsi1: dsi@1a96000 { compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; - reg = <0x1a96000 0x400>; + reg = <0x01a96000 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; @@ -861,9 +983,9 @@ dsi1_phy: phy@1a96400 { compatible = "qcom,dsi-phy-14nm-8953"; - reg = <0x1a96400 0x100>, - <0x1a96500 0x300>, - <0x1a96800 0x188>; + reg = <0x01a96400 0x100>, + <0x01a96500 0x300>, + <0x01a96800 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; @@ -871,7 +993,7 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; status = "disabled"; @@ -880,7 +1002,7 @@ apps_iommu: iommu@1e00000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x1e20000 0x20000>; + ranges = <0 0x01e20000 0x20000>; clocks = <&gcc GCC_SMMU_CFG_CLK>, <&gcc GCC_APSS_TCU_ASYNC_CLK>; @@ -916,11 +1038,11 @@ spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x200f000 0x1000>, - <0x2400000 0x800000>, - <0x2c00000 0x800000>, - <0x3800000 0x200000>, - <0x200a000 0x2100>; + reg = <0x0200f000 0x1000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x2100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; @@ -933,9 +1055,63 @@ #size-cells = <0>; }; + mpss: remoteproc@4080000 { + compatible = "qcom,msm8953-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>, + <&rpmpd MSM8953_VDDMD>; + power-domain-names = "cx", "mx","mss"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "xo"; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_BCR>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "modem"; + }; + }; + usb3: usb@70f8800 { compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; - reg = <0x70f8800 0x400>; + reg = <0x070f8800 0x400>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -979,14 +1155,13 @@ snps,hird-threshold = /bits/ 8 <0x00>; maximum-speed = "high-speed"; - phy_mode = "utmi"; }; }; sdhc_1: mmc@7824900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg = <0x07824900 0x500>, <0x07824000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, @@ -995,7 +1170,7 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; power-domains = <&rpmpd MSM8953_VDDCX>; @@ -1046,7 +1221,7 @@ sdhc_2: mmc@7864900 { compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; - reg = <0x7864900 0x500>, <0x7864000 0x800>; + reg = <0x07864900 0x500>, <0x07864000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, @@ -1055,7 +1230,7 @@ clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; power-domains = <&rpmpd MSM8953_VDDCX>; @@ -1101,7 +1276,7 @@ uart_0: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; + reg = <0x078af000 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; @@ -1112,7 +1287,7 @@ i2c_1: i2c@78b5000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b5000 0x600>; + reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, @@ -1130,7 +1305,7 @@ i2c_2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b6000 0x600>; + reg = <0x078b6000 0x600>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, @@ -1148,7 +1323,7 @@ i2c_3: i2c@78b7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b7000 0x600>; + reg = <0x078b7000 0x600>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, @@ -1165,7 +1340,7 @@ i2c_4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x78b8000 0x600>; + reg = <0x078b8000 0x600>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, @@ -1182,7 +1357,7 @@ i2c_5: i2c@7af5000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af5000 0x600>; + reg = <0x07af5000 0x600>; interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, @@ -1199,7 +1374,7 @@ i2c_6: i2c@7af6000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af6000 0x600>; + reg = <0x07af6000 0x600>; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, @@ -1216,7 +1391,7 @@ i2c_7: i2c@7af7000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af7000 0x600>; + reg = <0x07af7000 0x600>; interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, @@ -1233,7 +1408,7 @@ i2c_8: i2c@7af8000 { compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x7af8000 0x600>; + reg = <0x07af8000 0x600>; interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, @@ -1248,6 +1423,72 @@ status = "disabled"; }; + wcnss: remoteproc@a21b000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_fw_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&smp2p_wcnss_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -1257,13 +1498,13 @@ apcs: mailbox@b011000 { compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; - reg = <0xb011000 0x1000>; + reg = <0x0b011000 0x1000>; #mbox-cells = <1>; }; timer@b120000 { compatible = "arm,armv7-timer-mem"; - reg = <0xb120000 0x1000>; + reg = <0x0b120000 0x1000>; #address-cells = <0x01>; #size-cells = <0x01>; ranges; @@ -1272,52 +1513,166 @@ frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb121000 0x1000>, - <0xb122000 0x1000>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; }; frame@b123000 { frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb123000 0x1000>; + reg = <0x0b123000 0x1000>; status = "disabled"; }; frame@b124000 { frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb124000 0x1000>; + reg = <0x0b124000 0x1000>; status = "disabled"; }; frame@b125000 { frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb125000 0x1000>; + reg = <0x0b125000 0x1000>; status = "disabled"; }; frame@b126000 { frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb126000 0x1000>; + reg = <0x0b126000 0x1000>; status = "disabled"; }; frame@b127000 { frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb127000 0x1000>; + reg = <0x0b127000 0x1000>; status = "disabled"; }; frame@b128000 { frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - reg = <0xb128000 0x1000>; + reg = <0x0b128000 0x1000>; status = "disabled"; }; }; + + lpass: remoteproc@c200000 { + compatible = "qcom,msm8953-adsp-pil"; + reg = <0x0c200000 0x100>; + + interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; + dai@127 { + reg = <QUINARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi index 67baced639c9..085d79542e1b 100644 --- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi @@ -280,3 +280,7 @@ vdda3p3-supply = <&pm8950_l13>; status = "okay"; }; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi index 2d360d05aa5e..1f0bd24a074a 100644 --- a/arch/arm64/boot/dts/qcom/msm8976.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi @@ -20,6 +20,13 @@ chosen { }; + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -351,6 +358,8 @@ rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; #clock-cells = <1>; }; @@ -809,7 +818,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sdhc_1: mmc@7824000 { @@ -1027,7 +1035,8 @@ }; apcs: mailbox@b011000 { - compatible = "qcom,msm8976-apcs-kpss-global", "syscon"; + compatible = "qcom,msm8976-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi index cd77dcb55872..b8f2a01bcb96 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi @@ -60,11 +60,6 @@ reg = <0x0 0x05000000 0x0 0x1a00000>; no-map; }; - - reserved@6c00000 { - reg = <0x0 0x06c00000 0x0 0x400000>; - no-map; - }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts index 7b0f62144c3e..29e79ae0849d 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts @@ -2,7 +2,7 @@ /* * Copyright (c) 2015, Huawei Inc. All rights reserved. * Copyright (c) 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com> + * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com> */ /dts-v1/; @@ -31,13 +31,18 @@ #size-cells = <2>; ranges; + cont_splash_mem: memory@3401000 { + reg = <0 0x03401000 0 0x1000000>; + no-map; + }; + tzapp_mem: tzapp@4800000 { reg = <0 0x04800000 0 0x1900000>; no-map; }; - removed_region: reserved@6300000 { - reg = <0 0x06300000 0 0xD00000>; + reserved@6300000 { + reg = <0 0x06300000 0 0x700000>; no-map; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi index 4520a7e86d5b..2861bcdf87b7 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi @@ -46,8 +46,6 @@ }; clocks { - compatible = "simple-bus"; - divclk4: divclk4 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -542,8 +540,7 @@ }; &pmi8994_spmi_regulators { - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi index 3ceb86b06209..9dbde79f26a2 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -173,8 +173,7 @@ * power domain.. which still isn't enough and forces us to bind * OXILI_CX and OXILI_GX together! */ - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -482,7 +481,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ts_reset_active: ts-reset-active-state { diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 9ff9d35496d2..2831966be960 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -228,6 +228,11 @@ reg = <0 0xc9400000 0 0x3f00000>; no-map; }; + + reserved@6c00000 { + reg = <0 0x06c00000 0 0x400000>; + no-map; + }; }; smd { @@ -242,7 +247,7 @@ compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; - rpmcc: rpmcc { + rpmcc: clock-controller { compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc"; #clock-cells = <1>; }; @@ -840,7 +845,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; i2c5_default: i2c5-default-state { diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi index 2994337c6046..2adadc1e5b7c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi @@ -85,10 +85,6 @@ }; }; -&adsp_pil { - status = "okay"; -}; - &blsp1_i2c3 { status = "okay"; @@ -183,10 +179,6 @@ status = "okay"; }; -&gpu { - status = "okay"; -}; - &hsusb_phy1 { vdd-supply = <&vreg_l28a_0p925>; vdda-pll-supply = <&vreg_l12a_1p8>; @@ -215,7 +207,6 @@ &mss_pil { pll-supply = <&vreg_l12a_1p8>; - status = "okay"; }; &pcie0 { @@ -504,8 +495,48 @@ }; }; -&slpi_pil { +&slim_msm { status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; }; &sound { @@ -768,19 +799,3 @@ maximum-speed = "high-speed"; }; - -&venus { - status = "okay"; -}; - -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts index 1bdc1b134305..dfe75119b8d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -17,6 +17,7 @@ &adsp_pil { firmware-name = "qcom/msm8996/oneplus3/adsp.mbn"; + status = "okay"; }; &battery { @@ -25,6 +26,8 @@ }; &gpu { + status = "okay"; + zap-shader { firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; }; @@ -33,12 +36,15 @@ &mss_pil { firmware-name = "qcom/msm8996/oneplus3/mba.mbn", "qcom/msm8996/oneplus3/modem.mbn"; + status = "okay"; }; &slpi_pil { firmware-name = "qcom/msm8996/oneplus3/slpi.mbn"; + status = "okay"; }; &venus { firmware-name = "qcom/msm8996/oneplus3/venus.mbn"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts index 34f837dd0c12..51fce65e89f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -18,6 +18,7 @@ &adsp_pil { firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn"; + status = "okay"; }; &battery { @@ -26,6 +27,8 @@ }; &gpu { + status = "okay"; + zap-shader { firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; }; @@ -34,12 +37,15 @@ &mss_pil { firmware-name = "qcom/msm8996/oneplus3t/mba.mbn", "qcom/msm8996/oneplus3t/modem.mbn"; + status = "okay"; }; &slpi_pil { firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn"; + status = "okay"; }; &venus { firmware-name = "qcom/msm8996/oneplus3t/venus.mbn"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi index 2acfed28e3cb..1ce5df0a3405 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -12,8 +12,6 @@ / { clocks { - compatible = "simple-bus"; - divclk1_cdc: divclk1 { compatible = "gpio-gate-clock"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; @@ -337,6 +335,52 @@ }; }; +&slim_msm { + status = "okay"; + + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + + tasha_ifd: tas-ifd@0,0 { + compatible = "slim217,1a0"; + reg = <0 0>; + }; + + wcd9335: codec@1,0 { + compatible = "slim217,1a0"; + reg = <1 0>; + + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + interrupt-parent = <&tlmm>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr1", "intr2"; + interrupt-controller; + #interrupt-cells = <1>; + + pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + slim-ifc-dev = <&tasha_ifd>; + + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; + }; + }; +}; + &slpi_pil { status = "okay"; @@ -395,20 +439,6 @@ status = "okay"; }; -&wcd9335 { - clock-names = "mclk", "slimbus"; - clocks = <&divclk1_cdc>, - <&rpmcc RPM_SMD_BB_CLK1>; - - vdd-buck-supply = <&vreg_s4a_1p8>; - vdd-buck-sido-supply = <&vreg_s4a_1p8>; - vdd-rx-supply = <&vreg_s4a_1p8>; - vdd-tx-supply = <&vreg_s4a_1p8>; - vdd-vbat-supply = <&vph_pwr>; - vdd-micbias-supply = <&vph_pwr_bbyp>; - vdd-io-supply = <&vreg_s4a_1p8>; -}; - &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 905678e7175d..2b35cb3f5292 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1552,7 +1552,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; blsp2_i2c1_default: blsp2-i2c1-state { @@ -1851,8 +1850,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, - <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; device_type = "pci"; @@ -1882,7 +1881,6 @@ "cfg", "bus_master", "bus_slave"; - }; pcie1: pcie@608000 { @@ -1905,8 +1903,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, - <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; device_type = "pci"; @@ -1956,8 +1954,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, - <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; device_type = "pci"; @@ -3006,8 +3004,11 @@ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; + snps,hird-threshold = /bits/ 8 <0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; + snps,is-utmi-l1-suspend; + tx-fifo-resize; }; }; @@ -3383,36 +3384,8 @@ dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; - slim@1 { - reg = <1>; - #address-cells = <2>; - #size-cells = <0>; - - tasha_ifd: tas-ifd@0,0 { - compatible = "slim217,1a0"; - reg = <0 0>; - }; - - wcd9335: codec@1,0 { - pinctrl-0 = <&cdc_reset_active &wcd_intr_default>; - pinctrl-names = "default"; - - compatible = "slim217,1a0"; - reg = <1 0>; - interrupt-parent = <&tlmm>; - interrupts = <54 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "intr1", "intr2"; - interrupt-controller; - #interrupt-cells = <1>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - - slim-ifc-dev = <&tasha_ifd>; - - #sound-dai-cells = <1>; - }; - }; + status = "disabled"; }; adsp_pil: remoteproc@9300000 { @@ -3496,7 +3469,6 @@ }; }; }; - }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts index 5aad9f05780a..b35e2d9f428c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -44,7 +44,7 @@ label = "Keyboard Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; debounce-interval = <15>; - gpio-key,wakeup; + wakeup-source; linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; }; @@ -116,7 +116,7 @@ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; @@ -640,7 +640,6 @@ function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts index d36b36af49d0..fac8b3510cd3 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts @@ -34,7 +34,7 @@ &pmi8998_gpios { button_backlight_default: button-backlight-state { pins = "gpio5"; - function = "gpio"; + function = "normal"; bias-pull-down; qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi index ce03c7c239e5..062d56c42385 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi @@ -501,7 +501,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ts_int_active: ts-int-active-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts index 1868ad649415..055b6a643d82 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -22,7 +22,7 @@ enable-active-high; gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&disp_dvdd_en>; + pinctrl-0 = <&four_k_disp_dcdc_en>; }; }; @@ -37,8 +37,30 @@ qcom,soft-start-us = <200>; }; +&pm8005_gpios { + gpio-line-names = "EAR_EN", /* GPIO_1 */ + "NC", + "SLB", + "OPTION_1_PM8005"; +}; + &pmi8998_gpios { - disp_dvdd_en: disp-dvdd-en-active-state { + gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */ + "NC", + "NC", + "TYPEC_UUSB_SEL", + "VIB_LDO_EN", + "NC", + "DISPLAY_TYPE_SEL", + "USB_SWITCH_SEL", + "NC", + "4K_DISP_DCDC_EN", /* GPIO_10 */ + "NC", + "DIV_CLK3", + "SPMI_I2C_SEL", + "NC"; + + four_k_disp_dcdc_en: 4k-disp-dcdc-en-state { pins = "gpio10"; function = "normal"; bias-disable; @@ -49,6 +71,159 @@ }; }; +&tlmm { + gpio-line-names = "", /* GPIO_0 */ + "", + "", + "", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "MAIN_CAM_PWR_EN", + "TOF_INT_N", + "NC", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "TOF_RESET_N", + "CAM2_RSTN", + "NC", + "CAM1_RSTN", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "CC_DIR", + "UIM2_DETECT_EN", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "NC", + "NC", /* GPIO_50 */ + "NC", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "TRAY2_DET_DS", + "CODEC_RST_N", + "WSA_L_EN", + "WSA_R_EN", + "NC", + "NC", + "NC", + "LPASS_SLIMBUS_CLK", /* GPIO_70 */ + "LPASS_SLIMBUS_DATA0", + "LPASS_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "NC", + "NC", /* GPIO_80 */ + "SW_SERVICE", + "TX_GTR_THRES_IN", + "HW_ID0", + "HW_ID1", + "NC", + "NC", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_RESET_N", + "NC", /* GPIO_90 */ + "NC", + "NFC_IRQ", + "NFC_DWLD_EN", + "DISP_RESET_N", + "TRAY2_DET", + "CAM_SOF", + "RFFE6_CLK", + "RFFE6_DATA", + "DEBUG_GPIO0", + "DEBUG_GPIO1", /* GPIO_100 */ + "GRFC4", + "NC", + "NC", + "RSVD", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RST", + "UIM1_PRESENT", + "UIM_BATT_ALARM", + "RSVD", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT_N", + "NC", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "NC", + "NC", + "USB_DETECT_EN", + "NC", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "NC", + "TS_VDDIO_EN", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "NC", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; +}; + &vreg_l22a_2p85 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2704000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi index 820414758888..687e96068cb2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -21,7 +21,7 @@ clocks { div1_mclk: divclk1 { compatible = "gpio-gate-clock"; - pinctrl-0 = <&audio_mclk_pin>; + pinctrl-0 = <&div_clk1>; pinctrl-names = "default"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>; #clock-cells = <0>; @@ -46,7 +46,7 @@ enable-active-high; gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam0_vdig_default>; + pinctrl-0 = <&main_cam_pwr_en>; }; cam1_vdig_vreg: cam1-vdig { @@ -56,7 +56,7 @@ enable-active-high; gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam1_vdig_default>; + pinctrl-0 = <&chat_cam_pwr_en>; vin-supply = <&vreg_s3a_1p35>; }; @@ -67,7 +67,7 @@ enable-active-high; gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&cam_vio_default>; + pinctrl-0 = <&main_cam_pwr_io_en>; vin-supply = <&vreg_lvs1a_1p8>; }; @@ -92,21 +92,20 @@ id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&usb_extcon_active &usb_vbus_active>; + pinctrl-0 = <&cc_dir_default &usb_detect_en>; }; gpio-keys { compatible = "gpio-keys"; label = "Side buttons"; pinctrl-names = "default"; - pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, - <&cam_snapshot_pin_a>; + pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>; button-vol-down { label = "Volume Down"; gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; @@ -131,14 +130,14 @@ compatible = "gpio-keys"; label = "Hall sensors"; pinctrl-names = "default"; - pinctrl-0 = <&hall_sensor0_default>; + pinctrl-0 = <&acc_cover_open>; event-hall-sensor0 { label = "Cover Hall Sensor"; gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <30>; }; }; @@ -189,7 +188,7 @@ compatible = "gpio-vibrator"; enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vib_default>; + pinctrl-0 = <&vib_ldo_en>; }; }; @@ -263,7 +262,7 @@ vdd-supply = <&cam_vio_vreg>; pinctrl-names = "default"; - pinctrl-0 = <&tof_int &tof_reset>; + pinctrl-0 = <&tof_int_n &tof_reset>; }; }; @@ -292,6 +291,13 @@ regulator-soft-start; }; +&pm8005_gpios { + gpio-line-names = "NC", /* GPIO_1 */ + "NC", + "SLB", + "OPTION_1_PM8005"; +}; + &pm8005_regulators { /* VDD_GFX supply */ pm8005_s1: s1 { @@ -304,7 +310,34 @@ }; &pm8998_gpios { - vol_down_pin_a: vol-down-active-state { + gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */ + "NC", + "WLAN_SW_CTRL (DISALLOWED)", + "SSC_PWR_EN", + "VOL_DOWN_N", + "VOL_UP_N", + "SNAPSHOT_N", + "FOCUS_N", + "FLASH_THERM", + "", /* GPIO_10 */ + "", + "", + "DIV_CLK1", + "NC", + "NC (DISALLOWED)", + "DIV_CLK3", + "NC", + "NC", + "NC", + "NC (DISALLOWED)", /* GPIO_20 */ + "NFC_CLK_REQ", + "NC (DISALLOWED)", + "WCSS_PWR_REQ", + "OPTION_1 (DISALLOWED)", + "OPTION_2 (DISALLOWED)", + "PM_SLB (DISALLOWED)"; + + vol_down_n: vol-down-n-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -312,7 +345,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_focus_pin_a: cam-focus-btn-active-state { + focus_n: focus-n-state { pins = "gpio7"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -320,7 +353,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - cam_snapshot_pin_a: cam-snapshot-btn-active-state { + snapshot_n: snapshot-n-state { pins = "gpio8"; function = PMIC_GPIO_FUNC_NORMAL; bias-pull-up; @@ -328,7 +361,7 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; }; - audio_mclk_pin: audio-mclk-pin-active-state { + div_clk1: div-clk1-state { pins = "gpio13"; function = "func2"; power-source = <0>; @@ -336,7 +369,22 @@ }; &pmi8998_gpios { - cam_vio_default: cam-vio-active-state { + gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */ + "NC", + "NC", + "TYPEC_UUSB_SEL", + "VIB_LDO_EN", + "NC", + "DISPLAY_TYPE_SEL", + "NC", + "NC", + "NC", /* GPIO_10 */ + "NC", + "DIV_CLK3", + "SPMI_I2C_SEL", + "NC"; + + main_cam_pwr_io_en: main-cam-pwr-io-en-state { pins = "gpio1"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -346,7 +394,7 @@ power-source = <1>; }; - vib_default: vib-en-state { + vib_ldo_en: vib-ldo-en-state { pins = "gpio5"; function = PMIC_GPIO_FUNC_NORMAL; bias-disable; @@ -590,8 +638,158 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; - - mdp_vsync_n: mdp-vsync-n-state { + gpio-line-names = "", /* GPIO_0 */ + "", + "", + "", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "NC", + "NC", + "MDP_VSYNC_P", /* GPIO_10 */ + "RGBC_IR_INT", + "NFC_VEN", + "CAM_MCLK0", + "CAM_MCLK1", + "NC", + "NC", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "MAIN_CAM_PWR_EN", + "TOF_INT_N", + "NC", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "TOF_RESET_N", + "CAM2_RSTN", + "NC", + "CAM1_RSTN", /* GPIO_30 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "CC_DIR", + "UIM2_DETECT_EN", + "FP_RESET_N", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "NC", + "NC", /* GPIO_50 */ + "NC", + "NC", + "CODEC_INT2_N", + "CODEC_INT1_N", + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "FORCED_USB_BOOT", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "NC", + "TRAY2_DET_DS", + "CODEC_RST_N", + "WSA_L_EN", + "WSA_R_EN", + "NC", + "NC", + "NC", + "LPASS_SLIMBUS_CLK", /* GPIO_70 */ + "LPASS_SLIMBUS_DATA0", + "LPASS_SLIMBUS_DATA1", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "NC", + "RF_LCD_ID_EN", + "NC", + "NC", + "NC", + "NC", /* GPIO_80 */ + "SW_SERVICE", + "TX_GTR_THRES_IN", + "HW_ID0", + "HW_ID1", + "NC", + "NC", + "TS_I2C_SDA", + "TS_I2C_SCL", + "TS_RESET_N", + "NC", /* GPIO_90 */ + "NC", + "NFC_IRQ", + "NFC_DWLD_EN", + "DISP_RESET_N", + "TRAY2_DET", + "CAM_SOF", + "RFFE6_CLK", + "RFFE6_DATA", + "DEBUG_GPIO0", + "DEBUG_GPIO1", /* GPIO_100 */ + "GRFC4", + "NC", + "NC", + "RSVD", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RST", + "UIM1_PRESENT", + "UIM_BATT_ALARM", + "RSVD", + "NC", + "NC", + "ACCEL_INT", + "GYRO_INT", + "COMPASS_INT", + "ALS_PROX_INT_N", /* GPIO_120 */ + "FP_INT_N", + "NC", + "BAROMETER_INT", + "ACC_COVER_OPEN", + "TS_INT_N", + "NC", + "NC", + "USB_DETECT_EN", + "NC", + "QLINK_REQUEST", /* GPIO_130 */ + "QLINK_ENABLE", + "NC", + "NC", + "WMSS_RESET_N", + "PA_INDICATOR_OR", + "NC", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", /* GPIO_140 */ + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", + "RFFE2_DATA", + "RFFE2_CLK", + "RFFE1_DATA", + "RFFE1_CLK"; + + mdp_vsync_p: mdp-vsync-p-state { pins = "gpio10"; function = "mdp_vsync_a"; drive-strength = <2>; @@ -606,14 +804,14 @@ output-low; }; - msm_mclk0_default: msm-mclk0-active-state { + cam_mclk0_active: cam-mclk0-active-state { pins = "gpio13"; function = "cam_mclk"; drive-strength = <2>; bias-disable; }; - msm_mclk1_default: msm-mclk1-active-state { + cam_mclk1_active: cam-mclk1-active-state { pins = "gpio14"; function = "cam_mclk"; drive-strength = <2>; @@ -634,48 +832,46 @@ drive-strength = <2>; }; - cam0_vdig_default: cam0-vdig-default-state { + main_cam_pwr_en: main-cam-pwr-en-default-state { pins = "gpio21"; function = "gpio"; bias-disable; drive-strength = <2>; }; - tof_int: tof-int-state { + tof_int_n: tof-int-n-state { pins = "gpio22"; function = "gpio"; bias-pull-up; drive-strength = <2>; - input-enable; }; - cam1_vdig_default: cam1-vdig-default-state { + chat_cam_pwr_en: chat-cam-pwr-en-default-state { pins = "gpio25"; function = "gpio"; bias-disable; drive-strength = <2>; }; - usb_extcon_active: usb-extcon-active-state { - pins = "gpio38"; + tof_reset: tof-reset-state { + pins = "gpio27"; function = "gpio"; bias-disable; - drive-strength = <16>; + drive-strength = <2>; }; - tof_reset: tof-reset-state { - pins = "gpio27"; + cc_dir_default: cc-dir-active-state { + pins = "gpio38"; function = "gpio"; bias-disable; - drive-strength = <2>; + drive-strength = <16>; }; - hall_sensor0_default: acc-cover-open-state { + acc_cover_open: acc-cover-open-state { pins = "gpio124"; function = "gpio"; bias-disable; drive-strength = <2>; - input-enable; }; ts_int_n: ts-int-n-state { @@ -685,7 +881,7 @@ bias-pull-up; }; - usb_vbus_active: usb-vbus-active-state { + usb_detect_en: usb-detect-en-active-state { pins = "gpio128"; function = "gpio"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts index 7956b151c7a4..2444b87fddf7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts @@ -528,7 +528,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; mdss_dsi_active_state: mdss-dsi-active-state { @@ -620,7 +619,6 @@ function = "gpio"; drive-strength = <16>; bias-pull-up; - input-enable; }; ts_int_suspend_state: ts-int-suspend-state { @@ -642,7 +640,6 @@ function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 8bc1c59127e5..b150437a8355 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -922,7 +922,7 @@ phy-names = "pciephy"; status = "disabled"; - ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>, <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; #interrupt-cells = <1>; @@ -1524,7 +1524,7 @@ compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, <0x16280000 0x180000>; - reg-names = "stm-base", "stm-data-base"; + reg-names = "stm-base", "stm-stimulus-base"; status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -1993,7 +1993,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { @@ -2490,7 +2489,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,msm8998-apcs-hmss-global"; + compatible = "qcom,msm8998-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi new file mode 100644 index 000000000000..5f1d15db5c99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + + pm2250_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + bias-pull-up; + }; + + pm2250_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm2250_gpios: gpio@c000 { + compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm2250_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index fc0eccaccdf6..4bc717917f44 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660 { + pm660-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi index f9b3864bd3b9..87b71b7205b8 100644 --- a/arch/arm64/boot/dts/qcom/pm660l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -11,7 +11,7 @@ / { thermal-zones { - pm660l { + pm660l-thermal { polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index 135bfb8d629b..cca45fad75ac 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -116,6 +116,12 @@ #address-cells = <1>; #size-cells = <0>; + pm8150l_flash: led-controller@d300 { + compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + pm8150l_lpg: pwm { compatible = "qcom,pm8150l-lpg"; diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi index 16bcfb64d735..72609f31c890 100644 --- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi @@ -55,5 +55,11 @@ interrupt-controller; #interrupt-cells = <2>; }; + + pm8550b_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index e2a6b66d8847..f4fb1a92ab55 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,7 +41,7 @@ }; }; - pm8916_usbin: extcon@1300 { + pm8916_usbin: usb-detect@1300 { compatible = "qcom,pm8941-misc"; reg = <0x1300>; interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index adbba9f4089a..340033ac3186 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -72,7 +72,7 @@ }; pm8998_coincell: charger@2800 { - compatible = "qcom,pm8941-coincell"; + compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi index a0af91698d49..0192968f4d9b 100644 --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi @@ -49,8 +49,6 @@ pmi8994_spmi_regulators: regulators { compatible = "qcom,pmi8994-regulators"; - #address-cells = <1>; - #size-cells = <1>; }; pmi8994_wled: wled@d800 { diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi new file mode 100644 index 000000000000..ae5abc76bcc7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -0,0 +1,1561 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + * + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. + */ + +#include <dt-bindings/clock/qcom,gcc-qcm2290.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcm2290", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x40000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: sec-apps@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + pil_modem_mem: modem@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: video@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_adsp_mem: adsp@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1c00000>; + no-map; + }; + + pil_ipa_fw_mem: ipa-fw@53600000 { + reg = <0x0 0x53600000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: ipa-gsi@53610000 { + reg = <0x0 0x53610000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: zap@53615000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x53615000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: dpfs-data@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: reserved@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcm2290-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp5 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x0 0x00500000 0x0 0x300000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 127>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,qcm2290-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + #phy-cells = <0>; + + status = "disabled"; + }; + + qfprom@1b44000 { + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b44000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, + <0x0 0x04410000 0x0 0x8>; + #qcom,sensors = <10>; + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rng: rng@4453000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x04453000 0x0 0x1000>; + clocks = <&rpmcc RPM_SMD_HWKM_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + iommus = <&apps_smmu 0xc0 0x0>; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <8>; + + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC2_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0xa0 0x0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@4a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, + <&rpmpd QCM2290_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,qcm2290-apcs-hmss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0f121000 0x8000>; + + frame@0 { + reg = <0x0 0x1000>, + <0x1000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@2000 { + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@3000 { + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@4000 { + reg = <0x4000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@5000 { + reg = <0x5000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@6000 { + reg = <0x6000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@7000 { + reg = <0x7000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>; + reg-names = "freq-domain0"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_crit: wlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + mdm0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_crit: mdm0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + mdm1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_crit: mdm1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + hm-center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + hm_center_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_crit: hm-center-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 04c82d1624eb..10655401528e 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -296,7 +296,6 @@ drive-strength = <2>; bias-pull-up; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index bc2ed73afb74..eefed585738c 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1302,7 +1302,8 @@ }; apcs_glb: mailbox@b011000 { - compatible = "qcom,qcs404-apcs-apps-global", "syscon"; + compatible = "qcom,qcs404-apcs-apps-global", + "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; @@ -1469,8 +1470,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ - <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */ + <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index f234159d2060..734438113bba 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -27,6 +27,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD0>; power-domain-names = "psci"; @@ -45,6 +46,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD1>; power-domain-names = "psci"; @@ -60,6 +62,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD2>; power-domain-names = "psci"; @@ -75,6 +78,7 @@ device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; power-domains = <&CPU_PD3>; power-domain-names = "psci"; @@ -412,8 +416,6 @@ pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; @@ -581,8 +583,6 @@ pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; pinctrl-names = "default"; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; }; }; @@ -1312,6 +1312,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; gem_noc: interconnect@19100000 { @@ -1320,6 +1321,18 @@ qcom,bcm-voters = <&apps_bcm_voter>; #interconnect-cells = <2>; }; + + system-cache-controller@19200000 { + compatible = "qcom,qdu1000-llcc"; + reg = <0 0x19200000 0 0xd80000>, + <0 0x1a200000 0 0x80000>, + <0 0x221c8128 0 0x4>; + reg-names = "llcc_base", + "llcc_broadcast_base", + "multi_channel_register"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + multi-ch-bit-off = <24 2>; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts new file mode 100644 index 000000000000..ef3616093289 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +/dts-v1/; + +#include "qcm2290.dtsi" +#include "pm2250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB1"; + compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290"; + + aliases { + serial0 = &uart0; + sdhc1 = &sdhc_1; + sdhc2 = &sdhc_2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&key_volp_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm2250_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + non-removable; + supports-cqe; + no-sdio; + no-sd; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; + pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; + pinctrl-names = "default", "sleep"; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + sd_det_in_on: sd-det-in-on-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_det_in_off: sd-det-in-off-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; +}; + +/* UART connected to the Micro-USB port via a FTDI chip */ +&uart0 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_hsphy { + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts new file mode 100644 index 000000000000..dc80f0bca767 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include "sm4250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRB4210 RB2"; + compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm6125-regulators"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>; + vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>; + vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>; + vdd-l6-l8-supply = <&vreg_s5a_0p848>; + vdd-l9-l11-supply = <&vreg_s7a_2p04>; + vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>; + vdd-l12-l16-supply = <&vreg_s7a_2p04>; + vdd-l23-l24-supply = <&vph_pwr>; + + vreg_s5a_0p848: s5 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s6a_1p352: s6 { + regulator-min-microvolt = <304000>; + regulator-max-microvolt = <1456000>; + }; + + vreg_s7a_2p04: s7 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <2080000>; + }; + + vreg_l1a_1p0: l1 { + regulator-min-microvolt = <952000>; + regulator-max-microvolt = <1152000>; + }; + + vreg_l4a_0p9: l4 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_2p96: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3056000>; + }; + + vreg_l6a_0p6: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a_1p256: l7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l8a_0p664: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l11a_1p8: l11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <1984000>; + }; + + vreg_l13a_1p8: l13 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1952000>; + }; + + vreg_l14a_1p8: l14 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a_3p128: l15 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a_1p3: l16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1152000>; + regulator-max-microvolt = <1384000>; + }; + + vreg_l18a_1p232: l18 { + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1312000>; + }; + + vreg_l19a_1p8: l19 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l20a_1p8: l20 { + regulator-min-microvolt = <1624000>; + regulator-max-microvolt = <3304000>; + }; + + vreg_l21a_2p704: l21 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3600000>; + }; + + vreg_l22a_2p96: l22 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a_2p96: l24 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3600000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&vreg_l24a_2p96>; + vqmmc-supply = <&vreg_l11a_1p8>; + no-sdio; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */ + vmmc-supply = <&vreg_l22a_2p96>; + vqmmc-supply = <&vreg_l5a_2p96>; + no-sdio; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <37 5>, <43 2>, <47 1>, + <49 1>, <52 1>, <54 1>, + <56 3>, <61 2>, <64 1>, + <68 1>, <72 8>, <96 1>; +}; + +&uart4 { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 459384ec8f23..339fea522509 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -17,6 +17,7 @@ aliases { serial0 = &uart2; + serial1 = &uart9; }; chosen { @@ -400,6 +401,10 @@ status = "okay"; }; +&uart9 { + status = "okay"; +}; + &ufs_mem_hc { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi new file mode 100644 index 000000000000..7602cca47bae --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/spmi/spmi.h> + +/ { + thermal-zones { + pmm8654au_0_thermal: pm8775-0-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_0_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_1_thermal: pm8775-1-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_1_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_2_thermal: pm8775-2-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_2_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + pmm8654au_3_thermal: pm8775-3-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pmm8654au_3_temp_alarm>; + + trips { + trip0 { + temperature = <105000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + +&spmi_bus { + pmm8654au_0: pmic@0 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_0_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_0_pon: pon@1200 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1200>, <0x800>; + reg-names = "hlos", "pbs"; + mode-recovery = <0x1>; + mode-bootloader = <0x2>; + + pmm8654au_0_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + debounce = <15625>; + }; + + pmm8654au_0_pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + status = "disabled"; + }; + }; + + pmm8654au_0_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_0_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_1: pmic@2 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_1_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_1_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_2: pmic@4 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_2_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8654au_3: pmic@6 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8654au_3_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmm8654au_3_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_3_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts new file mode 100644 index 000000000000..f238a02a5448 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sa8775p.dtsi" +#include "sa8775p-pmics.dtsi" + +/ { + model = "Qualcomm SA8775P Ride"; + compatible = "qcom,sa8775p-ride", "qcom,sa8775p"; + + aliases { + serial0 = &uart10; + serial1 = &uart12; + serial2 = &uart17; + i2c18 = &i2c18; + spi16 = &spi16; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pmm8654au_0_gpios { + gpio-line-names = "DS_EN", + "POFF_COMPLETE", + "UFS0_VER_ID", + "FAST_POFF", + "DBU1_PON_DONE", + "AOSS_SLEEP", + "CAM_DES0_EN", + "CAM_DES1_EN", + "CAM_DES2_EN", + "CAM_DES3_EN", + "UEFI", + "ANALOG_PON_OPT"; +}; + +&pmm8654au_1_gpios { + gpio-line-names = "PMIC_C_ID0", + "PMIC_C_ID1", + "UFS1_VER_ID", + "IPA_PWR", + "", + "WLAN_DBU4_EN", + "WLAN_EN", + "BT_EN", + "USB2_PWR_EN", + "USB2_FAULT"; +}; + +&pmm8654au_2_gpios { + gpio-line-names = "PMIC_E_ID0", + "PMIC_E_ID1", + "USB0_PWR_EN", + "USB0_FAULT", + "SENSOR_IRQ_1", + "SENSOR_IRQ_2", + "SENSOR_RST", + "SGMIIO0_RST", + "SGMIIO1_RST", + "USB1_PWR_ENABLE", + "USB1_FAULT", + "VMON_SPX8"; +}; + +&pmm8654au_3_gpios { + gpio-line-names = "PMIC_G_ID0", + "PMIC_G_ID1", + "GNSS_RST", + "GNSS_EN", + "GNSS_BOOT_MODE"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32764>; +}; + +&spi16 { + pinctrl-0 = <&qup_spi16_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + qup_uart10_default: qup-uart10-state { + pins = "gpio46", "gpio47"; + function = "qup1_se3"; + }; + + qup_spi16_default: qup-spi16-state { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart12_default: qup-uart12-state { + qup_uart12_cts: qup-uart12-cts-pins { + pins = "gpio52"; + function = "qup1_se5"; + bias-disable; + }; + + qup_uart12_rts: qup-uart12-rts-pins { + pins = "gpio53"; + function = "qup1_se5"; + bias-pull-down; + }; + + qup_uart12_tx: qup-uart12-tx-pins { + pins = "gpio54"; + function = "qup1_se5"; + bias-pull-up; + }; + + qup_uart12_rx: qup-uart12-rx-pins { + pins = "gpio55"; + function = "qup1_se5"; + bias-pull-down; + }; + }; + + qup_uart17_default: qup-uart17-state { + qup_uart17_cts: qup-uart17-cts-pins { + pins = "gpio91"; + function = "qup2_se3"; + bias-disable; + }; + + qup_uart17_rts: qup0-uart17-rts-pins { + pins = "gpio92"; + function = "qup2_se3"; + bias-pull-down; + }; + + qup_uart17_tx: qup0-uart17-tx-pins { + pins = "gpio93"; + function = "qup2_se3"; + bias-pull-up; + }; + + qup_uart17_rx: qup0-uart17-rx-pins { + pins = "gpio94"; + function = "qup2_se3"; + bias-pull-down; + }; + }; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + pinctrl-0 = <&qup_uart10_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart12 { + pinctrl-0 = <&qup_uart12_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart17 { + pinctrl-0 = <&qup_uart17_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi new file mode 100644 index 000000000000..2343df7e0ea4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -0,0 +1,981 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sa8775p-gcc.h> +#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10000>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + L3_1: l3-cache { + compatible = "cache"; + }; + + }; + }; + + CPU5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10100>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10200>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + CPU7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x10300>; + enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sa8775p", "qcom,scm"; + }; + }; + + aggre1_noc: interconnect-aggre1-noc { + compatible = "qcom,sa8775p-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect-aggre2-noc { + compatible = "qcom,sa8775p-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + clk_virt: interconnect-clk-virt { + compatible = "qcom,sa8775p-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + config_noc: interconnect-config-noc { + compatible = "qcom,sa8775p-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + dc_noc: interconnect-dc-noc { + compatible = "qcom,sa8775p-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect-gem-noc { + compatible = "qcom,sa8775p-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpdsp_anoc: interconnect-gpdsp-anoc { + compatible = "qcom,sa8775p-gpdsp-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect-lpass-ag-noc { + compatible = "qcom,sa8775p-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-mc-virt { + compatible = "qcom,sa8775p-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect-mmss-noc { + compatible = "qcom,sa8775p-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspa_noc: interconnect-nspa-noc { + compatible = "qcom,sa8775p-nspa-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + nspb_noc: interconnect-nspb-noc { + compatible = "qcom,sa8775p-nspb-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect-pcie-anoc { + compatible = "qcom,sa8775p-pcie-anoc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect-system-noc { + compatible = "qcom,sa8775p-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + /* Will be updated by the bootloader. */ + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x0>; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + sail_ss_mem: sail-ss@80000000 { + reg = <0x0 0x80000000 0x0 0x10000000>; + no-map; + }; + + hyp_mem: hyp@90000000 { + reg = <0x0 0x90000000 0x0 0x600000>; + no-map; + }; + + xbl_boot_mem: xbl-boot@90600000 { + reg = <0x0 0x90600000 0x0 0x200000>; + no-map; + }; + + aop_image_mem: aop-image@90800000 { + reg = <0x0 0x90800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@90860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x90860000 0x0 0x20000>; + no-map; + }; + + uefi_log: uefi-log@908b0000 { + reg = <0x0 0x908b0000 0x0 0x10000>; + no-map; + }; + + reserved_mem: reserved@908f0000 { + reg = <0x0 0x908f0000 0x0 0xf000>; + no-map; + }; + + secdata_apss_mem: secdata-apss@908ff000 { + reg = <0x0 0x908ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@90900000 { + compatible = "qcom,smem"; + reg = <0x0 0x90900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + cpucp_fw_mem: cpucp-fw@90b00000 { + reg = <0x0 0x90b00000 0x0 0x100000>; + no-map; + }; + + lpass_machine_learning_mem: lpass-machine-learning@93b00000 { + reg = <0x0 0x93b00000 0x0 0xf00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 { + reg = <0x0 0x94a00000 0x0 0x800000>; + no-map; + }; + + pil_camera_mem: pil-camera@95200000 { + reg = <0x0 0x95200000 0x0 0x500000>; + no-map; + }; + + pil_adsp_mem: pil-adsp@95c00000 { + reg = <0x0 0x95c00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp0_mem: pil-gdsp0@97b00000 { + reg = <0x0 0x97b00000 0x0 0x1e00000>; + no-map; + }; + + pil_gdsp1_mem: pil-gdsp1@99900000 { + reg = <0x0 0x99900000 0x0 0x1e00000>; + no-map; + }; + + pil_cdsp0_mem: pil-cdsp0@9b800000 { + reg = <0x0 0x9b800000 0x0 0x1e00000>; + no-map; + }; + + pil_gpu_mem: pil-gpu@9d600000 { + reg = <0x0 0x9d600000 0x0 0x2000>; + no-map; + }; + + pil_cdsp1_mem: pil-cdsp1@9d700000 { + reg = <0x0 0x9d700000 0x0 0x1e00000>; + no-map; + }; + + pil_cvp_mem: pil-cvp@9f500000 { + reg = <0x0 0x9f500000 0x0 0x700000>; + no-map; + }; + + pil_video_mem: pil-video@9fc00000 { + reg = <0x0 0x9fc00000 0x0 0x700000>; + no-map; + }; + + hyptz_reserved_mem: hyptz-reserved@beb00000 { + reg = <0x0 0xbeb00000 0x0 0x11500000>; + no-map; + }; + + tz_stat_mem: tz-stat@d0000000 { + reg = <0x0 0xd0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@d0100000 { + reg = <0x0 0xd0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@d1300000 { + reg = <0x0 0xd1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@d1800000 { + reg = <0x0 0xd1800000 0x0 0x3900000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sa8775p-gcc"; + reg = <0x0 0x00100000 0x0 0xc7018>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + power-domains = <&rpmhpd SA8775P_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sa8775p-ipcc", "qcom,ipcc"; + reg = <0x0 0x00408000 0x0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0x5a3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart17: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x0088c000 0x0 0x4000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + + i2c18: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x00890000 0x0 0x4000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SA8775P_CX>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x443 0x0>; + status = "disabled"; + + uart10: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interconnect-names = "qup-core", "qup-config"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 + &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_QUP_1 0>; + power-domains = <&rpmhpd SA8775P_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + uart12: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a94000 0x0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", "qup-config"; + power-domains = <&rpmhpd SA8775P_CX>; + status = "disabled"; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sa8775p-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x30000>, + <0x0 0x17c000f0 0x0 0x64>; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 2>, + <70 520 1>, + <73 523 1>, + <118 568 6>, + <124 609 3>, + <159 638 1>, + <160 720 3>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 2>, + <216 646 5>, + <221 390 5>, + <226 700 2>, + <228 440 1>, + <229 663 1>, + <230 524 2>, + <232 612 3>, + <235 723 5>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x1100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x100000>, + <0x0 0x0e700000 0x0 0xa0000>, + <0x0 0x0c40a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + qcom,channel = <0>; + qcom,ee = <0>; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f000000 { + compatible = "qcom,sa8775p-tlmm"; + reg = <0x0 0x0f000000 0x0 0x1000000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 149>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + memtimer: timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + ranges = <0x0 0x0 0x0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17c21000 { + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <0>; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <1>; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <2>; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c27000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <3>; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <4>; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <5>; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + frame-number = <6>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sa8775p-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board_clk>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sa8775p-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-0 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-1 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp-4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-5 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-8 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sa8775p-cpufreq-epss", + "qcom,cpufreq-epss"; + reg = <0x0 0x18591000 0x0 0x1000>, + <0x0 0x18593000 0x0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + arch_timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index c3bdd3295c02..9f052270e090 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -312,14 +312,9 @@ reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel0_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; @@ -354,7 +349,7 @@ &qspi { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; flash@0 { compatible = "jedec,spi-nor"; @@ -512,8 +507,11 @@ bias-disable; }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ +&qspi_data0 { + bias-pull-up; +}; + +&qspi_data1 { bias-pull-up; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts deleted file mode 100644 index 3abd6222fe46..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r0.dts +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev0)"; - compatible = "google,kingoftown-rev0", "qcom,sc7180"; -}; - -/* - * In rev1+, the enable pin of pp3300_fp_tp will be tied to pp1800_l10a - * power rail instead, since kingoftown does not have FP. - */ -&pp3300_fp_tp { - gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&en_fp_rails>; -}; - -&tlmm { - en_fp_rails: en-fp-rails-state { - pins = "gpio74"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts deleted file mode 100644 index e0752ba7df11..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown-r1.dts +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Kingoftown board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-parade-ps8640.dtsi" -#include "sc7180-trogdor-kingoftown.dtsi" - -/ { - model = "Google Kingoftown (rev1+)"; - compatible = "google,kingoftown", "qcom,sc7180"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts index 315ac5eb5f78..36326ef972dc 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts @@ -5,10 +5,18 @@ * Copyright 2021 Google LLC. */ -/* This file must be included after sc7180-trogdor.dtsi */ +/dts-v1/; + +#include "sc7180-trogdor.dtsi" +#include "sc7180-trogdor-parade-ps8640.dtsi" #include <arm/cros-ec-keyboard.dtsi> #include "sc7180-trogdor-lte-sku.dtsi" +/ { + model = "Google Kingoftown"; + compatible = "google,kingoftown", "qcom,sc7180"; +}; + &alc5682 { compatible = "realtek,rt5682s"; /delete-property/ VBAT-supply; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts index 850776c5323d..70d5a7aa8873 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts @@ -26,7 +26,7 @@ interrupt-parent = <&tlmm>; interrupts = <58 IRQ_TYPE_EDGE_FALLING>; - vcc-supply = <&pp3300_fp_tp>; + vdd-supply = <&pp3300_fp_tp>; hid-descr-addr = <0x20>; wakeup-source; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts index 235cda2bba5e..7f01573b5543 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts @@ -23,7 +23,7 @@ /delete-node/&ap_ts; &panel { - compatible = "innolux,n116bca-ea1", "innolux,n116bge"; + compatible = "innolux,n116bca-ea1"; }; &sdhc_2 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts deleted file mode 100644 index d49de65aa960..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ /dev/null @@ -1,34 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Lazor board device tree source - * - * Copyright 2020 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" -#include "sc7180-trogdor-ti-sn65dsi86.dtsi" -#include "sc7180-trogdor-lazor.dtsi" - -/ { - model = "Google Lazor (rev0)"; - compatible = "google,lazor-rev0", "qcom,sc7180"; -}; - -&sn65dsi86_out { - /* - * Lane 0 was incorrectly mapped on the cable, but we've now decided - * that the cable is canon and in -rev1+ we'll make a board change - * that means we no longer need the swizzle. - */ - lane-polarities = <1 0>; -}; - -&usb_hub_2_x { - vdd-supply = <&pp3300_l7c>; -}; - -&usb_hub_3_x { - vdd-supply = <&pp3300_l7c>; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts deleted file mode 100644 index 2767817fb053..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 AUO panel board"; - compatible = "google,mrbland-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts deleted file mode 100644 index 711485574a03..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland-rev0.dtsi" - -/ { - model = "Google Mrbland rev0 BOE panel board"; - compatible = "google,mrbland-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi deleted file mode 100644 index f4c1f3813664..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev0.dtsi +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-mrbland.dtsi */ -&avdd_lcd_en { - pins = "gpio80"; -}; - -&mipi_1800_en { - pins = "gpio81"; -}; - -&vdd_reset_1800 { - pins = "gpio76"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts deleted file mode 100644 index 275313ef7554..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-auo.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x600 => 1536 - * - bits 11..8: Panel ID: 0x6 (AUO) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland rev1+ AUO panel board"; - compatible = "google,mrbland-sku1536", "qcom,sc7180"; -}; - -&panel { - compatible = "auo,b101uan08.3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts deleted file mode 100644 index 87c6b6c30b5e..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland-rev1-boe.dts +++ /dev/null @@ -1,24 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x300 => 768 - * - bits 11..8: Panel ID: 0x3 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-mrbland.dtsi" - -/ { - model = "Google Mrbland (rev1 - 2) BOE panel board"; - /* Uses ID 768 on rev1 and 1024 on rev2+ */ - compatible = "google,mrbland-sku1024", "google,mrbland-sku768", - "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv101wum-n53"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi deleted file mode 100644 index ed12ee35f06b..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-mrbland.dtsi +++ /dev/null @@ -1,320 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Mrbland board device tree source - * - * Copyright 2021 Google LLC. - */ - -/dts-v1/; - -#include "sc7180-trogdor.dtsi" - -/* This board only has 1 USB Type-C port. */ -/delete-node/ &usb_c1; - -/ { - avdd_lcd: avdd-lcd-regulator { - compatible = "regulator-fixed"; - regulator-name = "avdd_lcd"; - - gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - avee_lcd: avee-lcd-regulator { - compatible = "regulator-fixed"; - regulator-name = "avee_lcd"; - - gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&avee_lcd_en>; - - vin-supply = <&pp5000_a>; - }; - - v1p8_mipi: v1p8-mipi-regulator { - compatible = "regulator-fixed"; - regulator-name = "v1p8_mipi"; - - gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&mipi_1800_en>; - - vin-supply = <&pp3300_a>; - }; -}; - -&backlight { - pwms = <&cros_ec_pwm 0>; -}; - -&camcc { - status = "okay"; -}; - -&cros_ec { - keyboard-controller { - compatible = "google,cros-ec-keyb-switches"; - }; -}; - -&dsi0 { - - panel: panel@0 { - /* Compatible will be filled in per-board */ - reg = <0>; - enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vdd_reset_1800>; - avdd-supply = <&avdd_lcd>; - avee-supply = <&avee_lcd>; - pp1800-supply = <&v1p8_mipi>; - pp3300-supply = <&pp3300_dx_edp>; - backlight = <&backlight>; - rotation = <270>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - }; - - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; -}; - -&gpio_keys { - status = "okay"; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - ap_ts: touchscreen@5d { - compatible = "goodix,gt7375p"; - reg = <0x5d>; - pinctrl-names = "default"; - pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; - - vdd-supply = <&pp3300_ts>; - }; -}; - -&pp1800_uf_cam { - status = "okay"; -}; - -&pp1800_wf_cam { - status = "okay"; -}; - -&pp2800_uf_cam { - status = "okay"; -}; - -&pp2800_wf_cam { - status = "okay"; -}; - -&wifi { - qcom,ath10k-calibration-variant = "GO_MRBLAND"; -}; - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ -pp3300_disp_on: &pp3300_dx_edp { - gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor.dtsi */ - -/* - * No eDP on this board but it's logically the same signal so just give it - * a new name and assign the proper GPIO. - */ - -tp_en: &en_pp3300_dx_edp { - pins = "gpio85"; -}; - -/* PINCTRL - board-specific pinctrl */ - -&tlmm { - gpio-line-names = "HUB_RST_L", - "AP_RAM_ID0", - "AP_SKU_ID2", - "AP_RAM_ID1", - "", - "AP_RAM_ID2", - "UF_CAM_EN", - "WF_CAM_EN", - "TS_RESET_L", - "TS_INT_L", - "", - "", - "AP_EDP_BKLTEN", - "UF_CAM_MCLK", - "WF_CAM_CLK", - "", - "", - "UF_CAM_SDA", - "UF_CAM_SCL", - "WF_CAM_SDA", - "WF_CAM_SCL", - "AVEE_LCD_EN", - "", - "AMP_EN", - "", - "", - "", - "", - "HP_IRQ", - "WF_CAM_RST_L", - "UF_CAM_RST_L", - "AP_BRD_ID2", - "", - "AP_BRD_ID0", - "AP_H1_SPI_MISO", - "AP_H1_SPI_MOSI", - "AP_H1_SPI_CLK", - "AP_H1_SPI_CS_L", - "BT_UART_CTS", - "BT_UART_RTS", - "BT_UART_TXD", - "BT_UART_RXD", - "H1_AP_INT_ODL", - "", - "UART_AP_TX_DBG_RX", - "UART_DBG_TX_AP_RX", - "HP_I2C_SDA", - "HP_I2C_SCL", - "FORCED_USB_BOOT", - "AMP_BCLK", - "AMP_LRCLK", - "AMP_DIN", - "PEN_DET_ODL", - "HP_BCLK", - "HP_LRCLK", - "HP_DOUT", - "HP_DIN", - "HP_MCLK", - "AP_SKU_ID0", - "AP_EC_SPI_MISO", - "AP_EC_SPI_MOSI", - "AP_EC_SPI_CLK", - "AP_EC_SPI_CS_L", - "AP_SPI_CLK", - "AP_SPI_MOSI", - "AP_SPI_MISO", - /* - * AP_FLASH_WP_L is crossystem ABI. Schematics - * call it BIOS_FLASH_WP_L. - */ - "AP_FLASH_WP_L", - "", - "AP_SPI_CS0_L", - "", - "", - "", - "", - "WLAN_SW_CTRL", - "", - "REPORT_E", - "", - "ID0", - "", - "ID1", - "", - "", - "", - "CODEC_PWR_EN", - "HUB_EN", - "TP_EN", - "MIPI_1.8V_EN", - "VDD_RESET_1.8V", - "AVDD_LCD_EN", - "", - "AP_SKU_ID1", - "AP_RST_REQ", - "", - "AP_BRD_ID1", - "AP_EC_INT_L", - "SDM_GRFC_3", - "", - "", - "BOOT_CONFIG_4", - "BOOT_CONFIG_2", - "", - "", - "", - "", - "", - "", - "", - "BOOT_CONFIG_3", - "WCI2_LTE_COEX_TXD", - "WCI2_LTE_COEX_RXD", - "", - "", - "", - "", - "FORCED_USB_BOOT_POL", - "AP_TS_PEN_I2C_SDA", - "AP_TS_PEN_I2C_SCL", - "DP_HOT_PLUG_DET", - "EC_IN_RW_ODL"; - - avdd_lcd_en: avdd-lcd-en-state { - pins = "gpio88"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - avee_lcd_en: avee-lcd-en-state { - pins = "gpio21"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - mipi_1800_en: mipi-1800-en-state { - pins = "gpio86"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; - - vdd_reset_1800: vdd-reset-1800-state { - pins = "gpio87"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi index d06cc4ea3375..8823edbb4d6e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi @@ -39,7 +39,7 @@ interrupt-parent = <&tlmm>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - vcc-supply = <&pp3300_fp_tp>; + vdd-supply = <&pp3300_fp_tp>; post-power-on-delay-ms = <100>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi index bc4f3b6c6634..273e2249f018 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi @@ -12,6 +12,7 @@ compatible = "realtek,rt5682s"; realtek,dmic1-clk-pin = <2>; realtek,dmic-clk-rate-hz = <2048000>; + /delete-property/ VBAT-supply; }; ap_ts_pen_1v8: &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi index cb41ccdaccfd..8e7b42f843d4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi @@ -65,14 +65,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts deleted file mode 100644 index d6ed7d0afe4a..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x10 => 16 - * - bits 7..4: Panel ID: 0x1 (BOE) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 BOE panel board"; - compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180"; -}; - -&panel { - compatible = "boe,tv110c9m-ll3"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts deleted file mode 100644 index c03525ea64ca..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - * SKU: 0x0 => 0 - * - bits 7..4: Panel ID: 0x0 (INX) - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler-rev0.dtsi" - -/ { - model = "Google Wormdingler rev0 INX panel board"; - compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180"; -}; - -&panel { - compatible = "innolux,hj110iz-01a"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi deleted file mode 100644 index 7f272c6e95f6..000000000000 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi +++ /dev/null @@ -1,36 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Wormdingler board device tree source - * - * Copyright 2021 Google LLC. - * - */ - -/dts-v1/; - -#include "sc7180-trogdor-wormdingler.dtsi" - -&avdd_lcd { - gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>; -}; - -&panel { - enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; -}; - -&v1p8_mipi { - gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; -}; - -/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */ -&avdd_lcd_en { - pins = "gpio80"; -}; - -&mipi_1800_en { - pins = "gpio81"; -}; - -&vdd_reset_1800 { - pins = "gpio76"; -}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi index 9832e752da35..262d6691abd9 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi @@ -124,14 +124,9 @@ backlight = <&backlight>; rotation = <270>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 423630c4d02c..ca6920de7ea8 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -424,8 +424,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -512,6 +513,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + regulator-boot-on; }; pp1800_prox: @@ -1044,17 +1047,20 @@ ap_spi_fp: &spi10 { }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { drive-strength = <8>; - bias-disable; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; + +&qspi_data1 { + bias-pull-down; }; &qup_i2c2_default { @@ -1204,7 +1210,6 @@ ap_spi_fp: &spi10 { ap_ec_int_l: ap-ec-int-l-state { pins = "gpio94"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1227,7 +1232,6 @@ ap_spi_fp: &spi10 { bios_flash_wp_l: bios-flash-wp-l-state { pins = "gpio66"; function = "gpio"; - input-enable; bias-disable; }; @@ -1269,7 +1273,6 @@ ap_spi_fp: &spi10 { fp_to_ap_irq_l: fp-to-ap-irq-l-state { pins = "gpio4"; function = "gpio"; - input-enable; /* Has external pullup */ bias-disable; @@ -1284,7 +1287,6 @@ ap_spi_fp: &spi10 { h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio42"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1333,12 +1335,27 @@ ap_spi_fp: &spi10 { p_sensor_int_l: p-sensor-int-l-state { pins = "gpio24"; function = "gpio"; - input-enable; /* Has external pullup */ bias-disable; }; + qspi_sleep: qspi-sleep-state { + pins = "gpio63", "gpio64", "gpio65", "gpio68"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; + qup_uart3_sleep: qup-uart3-sleep-state { cts-pins { /* diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index ebfa21e9ed8a..ea1ffade1aa1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -76,6 +76,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -103,6 +104,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -126,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -149,6 +152,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -172,6 +176,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -195,6 +200,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -218,6 +224,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -241,6 +248,7 @@ device_type = "cpu"; compatible = "qcom,kryo468"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -1535,12 +1543,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio64", "gpio65"; + qspi_data0: qspi-data0-state { + pins = "gpio64"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data1: qspi-data1-state { + pins = "gpio65"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-state { pins = "gpio66", "gpio67"; function = "qspi_data"; }; @@ -2760,7 +2773,7 @@ system-cache-controller@9200000 { compatible = "qcom,sc7180-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3019,7 +3032,6 @@ required-opps = <&rpmhpd_opp_nom>; }; }; - }; dsi0: dsi@ae94000 { @@ -3280,7 +3292,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146aa000 { @@ -3407,7 +3418,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sc7180-apss-shared"; + compatible = "qcom,sc7180-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0 0x17c00000 0 0x10000>; #mbox-cells = <1>; }; @@ -3570,7 +3582,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -3578,6 +3590,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 16fb20369c01..f562e4d2b655 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -60,8 +60,9 @@ */ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; spi_flash: flash@0 { compatible = "jedec,spi-nor"; @@ -85,3 +86,23 @@ iommus = <&apps_smmu 0x1c02 0x1>; }; }; + +/* PINCTRL - chrome-common pinctrl */ + +&tlmm { + qspi_sleep: qspi-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index 1185141f348e..afae7f46b050 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -27,7 +27,7 @@ }; &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi index 1ca11a14104d..485f9942e128 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi @@ -94,6 +94,8 @@ hp_i2c: &i2c2 { interrupts = <101 IRQ_TYPE_EDGE_BOTH>; AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; MICVDD-supply = <&pp3300_codec>; realtek,dmic1-data-pin = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi index 69e7aa7b2f6c..8b855345e5c7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi @@ -76,6 +76,8 @@ hp_i2c: &i2c2 { interrupts = <101 IRQ_TYPE_EDGE_BOTH>; AVDD-supply = <&pp1800_alc5682>; + DBVDD-supply = <&pp1800_alc5682>; + LDO1-IN-supply = <&pp1800_alc5682>; MICVDD-supply = <&pp3300_codec>; realtek,dmic1-data-pin = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts index 4e0b013e25f4..df39a64da923 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts @@ -40,7 +40,7 @@ /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ &apps_rsc { - pmg1110-regulators { + regulators-2 { compatible = "qcom,pmg1110-rpmh-regulators"; qcom,pmic-id = "k"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi index 818d4046d2c7..38c8a3679fcb 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi @@ -33,7 +33,7 @@ ap_tp_i2c: &i2c0 { interrupts = <7 IRQ_TYPE_EDGE_FALLING>; hid-descr-addr = <0x20>; - vcc-supply = <&pp3300_z1>; + vdd-supply = <&pp3300_z1>; wakeup-source; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index 313083ec1f39..5b1c175c47f1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -692,18 +692,22 @@ ap_ec_spi: &spi10 { }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ drive-strength = <8>; }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls */ drive-strength = <8>; }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls */ + drive-strength = <8>; +}; + +&qspi_data1 { + bias-disable; /* External pulldown */ drive-strength = <8>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi index 3cfeb118d379..ebae545c587c 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi @@ -82,14 +82,12 @@ ap_h1_spi: &spi14 { ap_ec_int_l: ap-ec-int-l-state { pins = "gpio18"; function = "gpio"; - input-enable; bias-pull-up; }; h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio104"; function = "gpio"; - input-enable; bias-pull-up; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts index ba64316b4427..15222e92e3f5 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts @@ -25,7 +25,7 @@ }; &apps_rsc { - pmr735a-regulators { + regulators-2 { compatible = "qcom,pmr735a-rpmh-regulators"; qcom,pmic-id = "e"; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 8b5293e7fd2a..c6dc200c00ce 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -70,7 +70,7 @@ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEUP>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; linux,can-disable; }; @@ -184,7 +184,7 @@ }; &apps_rsc { - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -279,7 +279,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -636,16 +636,19 @@ }; &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { - bias-disable; + bias-pull-down; /* No external pulls or external pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-pull-down; /* No external pulls or external pulldown */ +}; + +&qspi_data1 { + bias-pull-down; /* No external pulls or external pulldown */ }; &qup_uart5_tx { diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 88204f794ccb..88b3586e389f 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -87,7 +87,7 @@ * are left out of here since they are managed elsewhere. */ - pm7325-regulators { + regulators-0 { compatible = "qcom,pm7325-rpmh-regulators"; qcom,pmic-id = "b"; @@ -188,7 +188,7 @@ }; }; - pm8350c-regulators { + regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; @@ -354,14 +354,9 @@ backlight = <&pm8350c_pwm_backlight>; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - edp_panel_in: endpoint { - remote-endpoint = <&mdss_edp_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss_edp_out>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 8f4ab6bd2886..31728f461422 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -168,6 +168,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -193,6 +194,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -214,6 +216,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -235,6 +238,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 @@ -256,6 +260,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -277,6 +282,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -298,6 +304,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -319,6 +326,7 @@ device_type = "cpu"; compatible = "qcom,kryo"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 @@ -935,7 +943,6 @@ opp-avg-kBps = <390000 0>; }; }; - }; gpi_dma0: dma-controller@900000 { @@ -2077,7 +2084,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -2133,8 +2140,6 @@ dma-coherent; - iommus = <&apps_smmu 0x1c80 0x1>; - iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -2679,7 +2684,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -3291,7 +3297,6 @@ opp-avg-kBps = <200000 0>; }; }; - }; usb_1_hsphy: phy@88e3000 { @@ -3533,7 +3538,7 @@ }; pmu@90b6400 { - compatible = "qcom,sc7280-cpu-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x090b6400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; @@ -3584,8 +3589,9 @@ system-cache-controller@9200000 { compatible = "qcom,sc7280-llcc"; - reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3595,12 +3601,17 @@ <0 0x088e2000 0 0x1000>; interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; eud_ep: endpoint { remote-endpoint = <&usb2_role_switch>; }; }; port@1 { + reg = <1>; eud_con: endpoint { remote-endpoint = <&con_eud>; }; @@ -3611,7 +3622,11 @@ eud_typec: connector { compatible = "usb-c-connector"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; con_eud: endpoint { remote-endpoint = <&eud_con>; }; @@ -3750,7 +3765,6 @@ required-opps = <&rpmhpd_opp_turbo>; }; }; - }; videocc: clock-controller@aaf0000 { @@ -4339,12 +4353,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio12", "gpio13"; + qspi_data0: qspi-data0-state { + pins = "gpio12"; + function = "qspi_data"; + }; + + qspi_data1: qspi-data1-state { + pins = "gpio13"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data23: qspi-data23-state { pins = "gpio16", "gpio17"; function = "qspi_data"; }; @@ -5166,20 +5185,20 @@ intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - #interrupt-cells = <3>; - interrupt-controller; reg = <0 0x17a00000 0 0x10000>, /* GICD */ <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <2>; + #size-cells = <2>; + ranges; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; msi-controller; #msi-cells = <1>; - reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; @@ -5339,6 +5358,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 98a0f1f9f01e..5b25d54b9591 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -413,11 +413,9 @@ backlight = <&backlight>; - ports { - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss0_dp3_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; }; }; }; @@ -563,6 +561,21 @@ status = "okay"; }; +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + &qup0 { status = "okay"; }; @@ -857,7 +870,7 @@ pins = "gpio101"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; @@ -882,7 +895,7 @@ pins = "gpio48"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 99c6d6574559..bdcba719fc38 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -24,6 +24,7 @@ aliases { i2c4 = &i2c4; i2c21 = &i2c21; + serial1 = &uart2; }; wcd938x: audio-codec { @@ -363,7 +364,11 @@ compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; + vdd-l1-l4-supply = <&vreg_s12b>; + vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_s10b: smps10 { regulator-name = "vreg_s10b"; @@ -416,7 +421,21 @@ regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; + vdd-bob-supply = <&vreg_vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1c>; + vdd-l2-l8-supply = <&vreg_s1c>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s11b>; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; @@ -453,6 +472,10 @@ qcom,pmic-id = "d"; vdd-l1-l4-supply = <&vreg_s11b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; vreg_l3d: ldo3 { regulator-name = "vreg_l3d"; @@ -531,11 +554,9 @@ backlight = <&backlight>; power-supply = <&vreg_edp_3p3>; - ports { - port { - edp_panel_in: endpoint { - remote-endpoint = <&mdss0_dp3_out>; - }; + port { + edp_panel_in: endpoint { + remote-endpoint = <&mdss0_dp3_out>; }; }; }; @@ -574,6 +595,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; @@ -584,7 +606,7 @@ clock-frequency = <400000>; pinctrl-names = "default"; - pinctrl-0 = <&i2c21_default>; + pinctrl-0 = <&i2c21_default>, <&tpad_default>; status = "okay"; @@ -595,13 +617,9 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; - - status = "disabled"; }; touchpad@2c { @@ -611,9 +629,7 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; + vddl-supply = <&vreg_s10b>; wakeup-source; }; @@ -625,6 +641,7 @@ hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; + vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; @@ -681,6 +698,23 @@ pinctrl-0 = <&pcie4_default>; status = "okay"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + bus-range = <0x01 0xff>; + + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "LE_X13S"; + }; + }; }; &pcie4_phy { @@ -770,6 +804,21 @@ status = "okay"; }; +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + &pmk8280_vadc { status = "okay"; @@ -1019,6 +1068,32 @@ status = "okay"; }; +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddio-supply = <&vreg_s10b>; + vddbtcxmx-supply = <&vreg_s12b>; + vddrfacmn-supply = <&vreg_s12b>; + vddrfa0p8-supply = <&vreg_s12b>; + vddrfa1p2-supply = <&vreg_s11b>; + vddrfa1p7-supply = <&vreg_s1c>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + &usb_0 { status = "okay"; }; @@ -1139,6 +1214,21 @@ &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + bt_default: bt-default-state { + hstp-bt-en-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hstp-sw-ctrl-pins { + pins = "gpio132"; + function = "gpio"; + bias-pull-down; + }; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; @@ -1149,7 +1239,6 @@ hall_int_n_default: hall-int-n-state { pins = "gpio107"; function = "gpio"; - input-enable; bias-disable; }; @@ -1306,12 +1395,40 @@ }; }; + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + }; + usb0_sbu_default: usb0-sbu-state { oe-n-pins { pins = "gpio101"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; @@ -1328,7 +1445,7 @@ pins = "gpio48"; function = "gpio"; bias-disable; - drive-strengh = <16>; + drive-strength = <16>; output-high; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi index be446eba4fa7..a0ba535bb6c9 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -96,6 +96,24 @@ #thermal-sensor-cells = <1>; status = "disabled"; }; + + pmk8280_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + wakeup-source; + status = "disabled"; + }; + + pmk8280_sdam_6: nvram@8500 { + compatible = "qcom,spmi-sdam"; + reg = <0x8500>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x8500 0x100>; + status = "disabled"; + }; }; pmc8280_1: pmic@1 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 42bfa9fa5b96..8fa9fbfe5d00 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -43,8 +43,9 @@ CPU0: cpu@0 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_0>; @@ -67,8 +68,9 @@ CPU1: cpu@100 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_100>; @@ -87,8 +89,9 @@ CPU2: cpu@200 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_200>; @@ -107,8 +110,9 @@ CPU3: cpu@300 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-a78c"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <602>; next-level-cache = <&L2_300>; @@ -127,8 +131,9 @@ CPU4: cpu@400 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_400>; @@ -147,8 +152,9 @@ CPU5: cpu@500 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_500>; @@ -167,8 +173,9 @@ CPU6: cpu@600 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_600>; @@ -187,8 +194,9 @@ CPU7: cpu@700 { device_type = "cpu"; - compatible = "qcom,kryo"; + compatible = "arm,cortex-x1c"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; next-level-cache = <&L2_700>; @@ -268,7 +276,6 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <3263>; exit-latency-us = <6562>; @@ -1207,6 +1214,20 @@ status = "disabled"; }; + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&qup_opp_table_100mhz>; + power-domains = <&rpmhpd SC8280XP_CX>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + i2c3: i2c@98c000 { compatible = "qcom,geni-i2c"; reg = <0 0x0098c000 0 0x4000>; @@ -1653,11 +1674,12 @@ <0x0 0x30000000 0x0 0xf1d>, <0x0 0x30000f20 0x0 0xa8>, <0x0 0x30001000 0x0 0x1000>, - <0x0 0x30100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x30100000 0x0 0x100000>, + <0x0 0x01c03000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x30200000 0x0 0x30200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>, <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1752,11 +1774,12 @@ <0x0 0x32000000 0x0 0xf1d>, <0x0 0x32000f20 0x0 0xa8>, <0x0 0x32001000 0x0 0x1000>, - <0x0 0x32100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x32100000 0x0 0x100000>, + <0x0 0x01c0b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x32200000 0x0 0x32200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>, <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1849,11 +1872,12 @@ <0x0 0x34000000 0x0 0xf1d>, <0x0 0x34000f20 0x0 0xa8>, <0x0 0x34001000 0x0 0x1000>, - <0x0 0x34100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x34100000 0x0 0x100000>, + <0x0 0x01c13000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x34200000 0x0 0x34200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>, <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -1949,11 +1973,12 @@ <0x0 0x38000000 0x0 0xf1d>, <0x0 0x38000f20 0x0 0xa8>, <0x0 0x38001000 0x0 0x1000>, - <0x0 0x38100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x38100000 0x0 0x100000>, + <0x0 0x01c1b000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x38200000 0x0 0x38200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>, <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -2046,11 +2071,12 @@ <0x0 0x3c000000 0x0 0xf1d>, <0x0 0x3c000f20 0x0 0xa8>, <0x0 0x3c001000 0x0 0x1000>, - <0x0 0x3c100000 0x0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0x0 0x3c100000 0x0 0x100000>, + <0x0 0x01c23000 0x0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>, <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>; bus-range = <0x00 0xff>; @@ -2489,7 +2515,6 @@ status = "disabled"; }; - /* RX */ swr1: soundwire-controller@3210000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03210000 0 0x2000>; @@ -2564,13 +2589,13 @@ status = "disabled"; }; - /* WSA */ swr0: soundwire-controller@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.6.0"; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + label = "WSA"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2592,13 +2617,12 @@ status = "disabled"; }; - /* TX */ swr2: soundwire-controller@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; - interrupts-extended = <&intc GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "core", "wake"; + interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; clocks = <&txmacro>; clock-names = "iface"; @@ -2702,7 +2726,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -2720,7 +2743,6 @@ function = "dmic1_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2736,7 +2758,6 @@ pins = "gpio9"; function = "dmic2_data"; drive-strength = <8>; - input-enable; }; }; @@ -2754,7 +2775,6 @@ function = "dmic2_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2773,7 +2793,6 @@ drive-strength = <2>; slew-rate = <1>; bias-bus-hold; - }; }; @@ -2946,7 +2965,7 @@ }; pmu@90b6400 { - compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x090b6400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; @@ -2983,8 +3002,14 @@ system-cache-controller@9200000 { compatible = "qcom,sc8280xp-llcc"; - reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>, + <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc4_base", "llcc5_base", + "llcc6_base", "llcc7_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -3253,7 +3278,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&mdss0_dp0_opp_table>; - power-domains = <&rpmhpd SC8280XP_CX>; + power-domains = <&rpmhpd SC8280XP_MMCX>; status = "disabled"; @@ -3331,7 +3356,7 @@ #sound-dai-cells = <0>; operating-points-v2 = <&mdss0_dp1_opp_table>; - power-domains = <&rpmhpd SC8280XP_CX>; + power-domains = <&rpmhpd SC8280XP_MMCX>; status = "disabled"; @@ -4040,6 +4065,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; remoteproc_nsp0: remoteproc@1b300000 { @@ -4398,7 +4424,6 @@ required-opps = <&rpmhpd_opp_nom>; }; }; - }; mdss1_dp1: displayport-controller@22098000 { diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts index 7c81918eee66..7459525d9982 100644 --- a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -29,7 +29,7 @@ gpio-keys { compatible = "gpio-keys"; - volup { + key-volup { label = "Volume Up"; gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index e52580acd5c8..2ca713a3902a 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -112,7 +112,7 @@ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = <KEY_VOLUMEDOWN>; - gpio-key,wakeup; + wakeup-source; debounce-interval = <15>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi index 5827cda270a0..37e72b1c56dc 100644 --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -328,6 +328,25 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-131250000 { + opp-hz = /bits/ 64 <131250000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-210000000 { + opp-hz = /bits/ 64 <210000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-262500000 { + opp-hz = /bits/ 64 <262500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -1189,7 +1208,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; usb3: usb@a8f8800 { @@ -1451,25 +1469,6 @@ <0>; }; - dsi_opp_table: opp-table-dsi { - compatible = "operating-points-v2"; - - opp-131250000 { - opp-hz = /bits/ 64 <131250000>; - required-opps = <&rpmpd_opp_svs>; - }; - - opp-210000000 { - opp-hz = /bits/ 64 <210000000>; - required-opps = <&rpmpd_opp_svs_plus>; - }; - - opp-262500000 { - opp-hz = /bits/ 64 <262500000>; - required-opps = <&rpmpd_opp_nom>; - }; - }; - mdss: display-subsystem@c900000 { compatible = "qcom,mdss"; reg = <0x0c900000 0x1000>, @@ -2268,7 +2267,8 @@ }; apcs_glb: mailbox@17911000 { - compatible = "qcom,sdm660-apcs-hmss-global"; + compatible = "qcom,sdm660-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x17911000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index e3e61b9d1b9d..32a7bd59e1ec 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -395,7 +395,6 @@ regulator-enable-ramp-delay = <500>; }; }; - }; &gcc { diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index 02f14692dd9d..c5f839dd1c6e 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -430,6 +431,10 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; clock-names = "iface", "core", "xo", "ice", "bus"; + interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0x140 0xf>; @@ -442,6 +447,38 @@ non-removable; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-20000000 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_min_svs>; + opp-peak-kBps = <80000 80000>; + opp-avg-kBps = <52286 80000>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <200000 100000>; + opp-avg-kBps = <130718 100000>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <200000 130000>; + opp-avg-kBps = <130718 130000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <4096000 4096000>; + opp-avg-kBps = <1338562 1338562>; + }; + }; }; gpi_dma0: dma-controller@800000 { @@ -477,6 +514,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -490,6 +529,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -507,6 +550,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -524,6 +571,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -541,6 +592,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -558,6 +613,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -575,6 +634,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -592,6 +655,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -609,6 +676,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>, + <&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -649,6 +720,8 @@ #address-cells = <2>; #size-cells = <2>; ranges; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>; + interconnect-names = "qup-core"; status = "disabled"; i2c8: i2c@a80000 { @@ -662,6 +735,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -679,6 +756,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -696,6 +777,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -713,6 +798,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -730,6 +819,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -747,6 +840,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -764,6 +861,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -781,6 +882,10 @@ #address-cells = <1>; #size-cells = <0>; power-domains = <&rpmhpd SDM670_CX>; + interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>, + <&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "qup-core", "qup-config", "qup-memory"; dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1028,6 +1133,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>, + <&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>; + interconnect-names = "usb-ddr", "apps-usb"; + status = "disabled"; usb_1_dwc3: usb@a600000 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index f2b48241d15c..d05c511718df 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -135,11 +135,9 @@ backlight = <&backlight>; no-hpd; - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&sn65dsi86_out>; - }; + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; }; }; }; @@ -319,8 +317,9 @@ &qspi { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>; + pinctrl-1 = <&qspi_sleep>; flash@0 { compatible = "jedec,spi-nor"; @@ -995,16 +994,19 @@ ap_ts_i2c: &i2c14 { /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qspi_cs0 { - bias-disable; + bias-disable; /* External pullup */ }; &qspi_clk { - bias-disable; + bias-disable; /* Rely on Cr50 internal pulldown */ }; -&qspi_data01 { - /* High-Z when no transfers; nice to park the lines */ - bias-pull-up; +&qspi_data0 { + bias-disable; /* Rely on Cr50 internal pulldown */ +}; + +&qspi_data1 { + bias-pull-down; }; &qup_i2c3_default { @@ -1155,14 +1157,12 @@ ap_ts_i2c: &i2c14 { bios_flash_wp_r_l: bios-flash-wp-r-l-state { pins = "gpio128"; function = "gpio"; - input-enable; bias-disable; }; ec_ap_int_l: ec-ap-int-l-state { pins = "gpio122"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1190,7 +1190,6 @@ ap_ts_i2c: &i2c14 { h1_ap_int_odl: h1-ap-int-odl-state { pins = "gpio129"; function = "gpio"; - input-enable; bias-pull-up; }; @@ -1236,6 +1235,22 @@ ap_ts_i2c: &i2c14 { output-high; }; + qspi_sleep: qspi-sleep-state { + pins = "gpio90", "gpio91", "gpio92", "gpio95"; + + /* + * When we're not actively transferring we want pins as GPIOs + * with output disabled so that the quad SPI IP block stops + * driving them. We rely on the normal pulls configured in + * the active state and don't redefine them here. Also note + * that we don't need the reverse (output-enable) in the + * normal mode since the "output-enable" only matters for + * GPIO function. + */ + function = "gpio"; + output-disable; + }; + sdc2_clk: sdc2-clk-state { pins = "sdc2_clk"; bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index d4866feef2c4..e14fe9bbb386 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -819,7 +819,6 @@ &spi2 { /* On Low speed expansion */ - label = "LS-SPI0"; status = "okay"; }; @@ -1136,10 +1135,6 @@ bias-disable; }; -&pm8998_gpios { - -}; - /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { drive-strength = <6>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 64638ea94db7..5c384345c05d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -29,6 +29,23 @@ stdout-path = "serial0:115200n8"; }; + gpio-hall-sensor { + compatible = "gpio-keys"; + label = "Hall effect sensor"; + + pinctrl-0 = <&hall_sensor_default>; + pinctrl-names = "default"; + + event-hall-sensor { + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + label = "Hall Effect Sensor"; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + wakeup-source; + }; + }; + gpio-keys { compatible = "gpio-keys"; label = "Volume keys"; @@ -330,8 +347,6 @@ display_panel: panel@0 { status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; vddio-supply = <&vreg_l14a_1p88>; @@ -535,6 +550,11 @@ bias-disable; }; +&slpi_pas { + firmware-name = "qcom/sdm845/oneplus6/slpi.mbn"; + status = "okay"; +}; + &sound { compatible = "qcom,sdm845-sndcard"; pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>; @@ -753,6 +773,13 @@ &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; + hall_sensor_default: hall-sensor-default-state { + pins = "gpio124"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + tri_state_key_default: tri-state-key-default-state { pins = "gpio40", "gpio42", "gpio26"; function = "gpio"; @@ -779,7 +806,6 @@ function = "mdp_vsync"; drive-strength = <2>; bias-disable; - input-enable; }; panel_esd_pin: panel-esd-state { @@ -787,17 +813,14 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; speaker_default: speaker-default-state { - mux { - pins = "gpio69"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - output-high; - }; + pins = "gpio69"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + output-high; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 086d14e2de92..d82c0d4407f0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -45,7 +45,6 @@ "AMIC3", "MIC BIAS4", "AMIC4", "MIC BIAS1", "AMIC5", "MIC BIAS3"; - }; /* diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index b54e304abf71..0ad891348e0c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -572,6 +572,11 @@ status = "okay"; }; +&slpi_pas { + firmware-name = "qcom/sdm845/axolotl/slpi.mbn"; + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; @@ -608,7 +613,6 @@ function = "gpio"; drive-strength = <8>; bias-pull-up; - input-enable; }; ts_int_suspend: ts-int-suspend-state { @@ -616,7 +620,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; ts_reset_active: ts-reset-active-state { diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts index 34f84f1f1eb4..d97b7f1e7140 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -11,3 +11,7 @@ model = "Sony Xperia XZ2"; compatible = "sony,akari-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 2f5e12deaada..5d2052a0ff69 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -7,12 +7,57 @@ #include "sdm845-sony-xperia-tama.dtsi" +/* XZ3 uses an Atmel touchscreen instead. */ +/delete-node/ &touchscreen; + / { model = "Sony Xperia XZ3"; compatible = "sony,akatsuki-row", "qcom,sdm845"; + + /* Fixed DCDC for the OLED panel */ + ts_vddio_supply: ts-vddio-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_vddio"; + + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <1840000>; + + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ibb { + status = "disabled"; +}; + +&lab { + status = "disabled"; +}; + +&panel { + /* Akatsuki uses an OLED panel. */ + /delete-property/ backlight; + /delete-property/ vsp-supply; + /delete-property/ vsn-supply; + /delete-property/ touch-reset-gpios; +}; + +&pmi8998_wled { + status = "disabled"; +}; + +&tlmm { + ts_vddio_en: ts-vddio-en-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; }; -/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ &vreg_l14a_1p8 { regulator-min-microvolt = <1840000>; regulator-max-microvolt = <1840000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts index c9e62c72f60e..cd056f78070f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -11,3 +11,9 @@ model = "Sony Xperia XZ2 Compact"; compatible = "sony,apollo-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; + height-mm = <112>; + width-mm = <56>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 4984c7496c31..420ffede3e80 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -98,6 +98,11 @@ }; }; +&adsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn"; + status = "okay"; +}; + &apps_rsc { regulators-0 { compatible = "qcom,pm8998-rpmh-regulators"; @@ -228,6 +233,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <62000>; }; vreg_l15a_1p8: ldo15 { @@ -314,6 +320,7 @@ regulator-min-microvolt = <2856000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-system-load = <100000>; }; vreg_lvs1a_1p8: lvs1 { @@ -356,6 +363,48 @@ }; }; +&cdsp_pas { + firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn"; + status = "okay"; +}; + +&dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -364,11 +413,64 @@ <GCC_LPASS_SWAY_CLK>; }; -&i2c5 { +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; + }; +}; + +&i2c5 { clock-frequency = <400000>; + status = "okay"; + + touchscreen: touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vreg_l14a_1p8>; + /* + * This is a blatant abuse of OF, but the panel driver *needs* + * to probe first, as the power/gpio switching needs to be precisely + * timed in order for both the display and touch panel to function properly. + */ + incell-supply = <&panel>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; - /* Synaptics touchscreen @ 2c, 3c */ + pinctrl-0 = <&ts_default>; + pinctrl-1 = <&ts_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; }; &i2c10 { @@ -388,6 +490,31 @@ /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; +&ibb { + qcom,discharge-resistor-kohms = <300>; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <0>; + regulator-max-microamp = <800000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + &pm8998_gpios { focus_n: focus-n-state { pins = "gpio2"; @@ -422,6 +549,16 @@ }; }; +&pmi8998_wled { + default-brightness = <800>; + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <20000>; + qcom,enabled-strings = <0 1 2 3>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -465,6 +602,59 @@ bias-pull-up; }; }; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_sleep: sde-dsi-sleep-state { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active_sleep: sde-te-active-sleep-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_default: ts-default-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + ts_sleep: ts-sleep-state { + reset-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + int-pins { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; }; &uart6 { @@ -500,3 +690,8 @@ vdda-pll-supply = <&vreg_l12a_1p8>; vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; }; + +&venus { + firmware-name = "qcom/sdm845/Sony/tama/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi index 0d7c37f39176..c15d48860646 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi @@ -80,7 +80,6 @@ pins = "gpio54"; function = "gpio"; - input-enable; bias-pull-down; drive-strength = <2>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index e0fda4d754fe..5ed975cc6ecb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -2,6 +2,7 @@ /dts-v1/; +#include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> @@ -232,9 +233,6 @@ vddpos-supply = <&lab>; vddneg-supply = <&ibb>; - #address-cells = <1>; - #size-cells = <0>; - backlight = <&pmi8998_wled>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; @@ -322,6 +320,16 @@ }; }; +&pmi8998_lpg { + status = "okay"; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_WHITE>; + function = LED_FUNCTION_STATUS; + }; +}; + &pmi8998_wled { status = "okay"; qcom,current-boost-limit = <970>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts index 8e176111e599..e9427851ebaa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts @@ -10,6 +10,6 @@ }; &display_panel { - compatible = "tianma,fhd-video"; + compatible = "tianma,fhd-video", "novatek,nt36672a"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 1b7fdbae6a2b..8ae0ffccaab2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -586,7 +586,6 @@ function = "gpio"; bias-pull-down; drive-strength = <16>; - input-enable; }; ts_reset_sleep: ts-reset-sleep-state { @@ -601,7 +600,6 @@ function = "gpio"; bias-pull-down; drive-strength = <2>; - input-enable; }; sde_dsi_active: sde-dsi-active-state { @@ -712,7 +710,5 @@ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; - - qcom,snoc-host-cap-skip-quirk; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 479859bd8ab3..90424442bb4a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> @@ -92,9 +93,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -118,9 +120,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -140,9 +143,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -162,9 +166,10 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <611>; - dynamic-power-coefficient = <290>; + dynamic-power-coefficient = <154>; qcom,freq-domain = <&cpufreq_hw 0>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>, @@ -184,6 +189,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -206,6 +212,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -228,6 +235,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -250,6 +258,7 @@ device_type = "cpu"; compatible = "qcom,kryo385"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <442>; @@ -331,12 +340,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -870,6 +877,14 @@ size = <0 0x4000>; no-map; }; + + fastrpc_mem: fastrpc { + compatible = "shared-dma-pool"; + alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>; + alignment = <0x0 0x400000>; + size = <0x0 0x1000000>; + reusable; + }; }; adsp_pas: remoteproc-adsp { @@ -2192,8 +2207,11 @@ llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; - reg = <0 0x01100000 0 0x31000>, <0 0x01300000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, + <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>, + <0 0x01300000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -2241,7 +2259,7 @@ }; pmu@1436400 { - compatible = "qcom,sdm845-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x01436400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>; @@ -2282,8 +2300,9 @@ reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, - <0 0x60100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; + <0 0x60100000 0 0x100000>, + <0 0x01c07000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; @@ -2292,8 +2311,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0xd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -2319,7 +2338,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1c10 0xf>; iommu-map = <0x0 &apps_smmu 0x1c10 0x1>, <0x100 &apps_smmu 0x1c11 0x1>, <0x200 &apps_smmu 0x1c12 0x1>, @@ -2387,8 +2405,9 @@ reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, - <0 0x40100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "config"; + <0 0x40100000 0 0x100000>, + <0 0x01c0c000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "config", "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; @@ -2397,7 +2416,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -2429,7 +2448,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c00 0xf>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>, <0x200 &apps_smmu 0x1c02 0x1>, @@ -2617,7 +2635,7 @@ }; cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.0"; + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rpmhcc RPMH_CE_CLK>; @@ -2758,12 +2776,17 @@ function = "qspi_cs"; }; - qspi_data01: qspi-data01-state { - pins = "gpio91", "gpio92"; + qspi_data0: qspi-data0-state { + pins = "gpio91"; function = "qspi_data"; }; - qspi_data12: qspi-data12-state { + qspi_data1: qspi-data1-state { + pins = "gpio92"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-state { pins = "gpio93", "gpio94"; function = "qspi_data"; }; @@ -3163,7 +3186,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_active: quat-mi2s-active-state { @@ -3179,7 +3201,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd0_active: quat-mi2s-sd0-active-state { @@ -3194,7 +3215,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd1_active: quat-mi2s-sd1-active-state { @@ -3209,7 +3229,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd2_active: quat-mi2s-sd2-active-state { @@ -3224,7 +3243,6 @@ function = "gpio"; drive-strength = <2>; bias-pull-down; - input-enable; }; quat_mi2s_sd3_active: quat-mi2s-sd3-active-state { @@ -3314,6 +3332,59 @@ "gcc_gpu_gpll0_div_clk_src"; }; + slpi_pas: remoteproc@5c00000 { + compatible = "qcom,sdm845-slpi-pas"; + reg = <0 0x5c00000 0 0x4000>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + qcom,qmp = <&aoss_qmp>; + + power-domains = <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA + QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>; + memory-region = <&fastrpc_mem>; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@0 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <0>; + }; + }; + }; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -4924,7 +4995,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; sram@146bf000 { @@ -5222,7 +5292,7 @@ }; cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; @@ -5232,6 +5302,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; wifi: wifi@18800000 { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 5c688cb6a7ce..1326c171fe72 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -606,7 +606,6 @@ pins = "gpio37"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -615,7 +614,6 @@ pins = "gpio125"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -624,7 +622,6 @@ pins = "gpio92"; function = "gpio"; - input-enable; bias-pull-up; drive-strength = <2>; }; @@ -633,7 +630,6 @@ pins = "gpio124"; function = "gpio"; - input-enable; bias-disable; }; @@ -641,7 +637,6 @@ pins = "gpio95"; function = "gpio"; - input-enable; bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts index a3f1c7c41fd7..a1f0622db5a0 100644 --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts @@ -202,12 +202,22 @@ vqmmc-supply = <&vreg_l5a>; cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>; status = "okay"; }; &tlmm { gpio-reserved-ranges = <14 4>; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc { @@ -225,11 +235,16 @@ status = "okay"; }; -&usb_1 { +&usb { status = "okay"; }; -&usb_1_hsphy { +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { vdd-supply = <&vreg_l4a>; vdda-pll-supply = <&vreg_l12a>; vdda-phy-dpdm-supply = <&vreg_l15a>; diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index fbd67d2c8d78..631ca327e064 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -5,8 +5,10 @@ #include <dt-bindings/clock/qcom,gcc-sm6115.h> #include <dt-bindings/clock/qcom,sm6115-dispcc.h> +#include <dt-bindings/clock/qcom,sm6115-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -39,6 +41,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -54,6 +57,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -65,6 +69,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -76,6 +81,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; @@ -87,6 +93,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; @@ -102,6 +109,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x101>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -113,6 +121,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x102>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -124,6 +133,7 @@ device_type = "cpu"; compatible = "qcom,kryo260"; reg = <0x0 0x103>; + clocks = <&cpufreq_hw 1>; capacity-dmips-mhz = <1638>; dynamic-power-coefficient = <282>; enable-method = "psci"; @@ -281,6 +291,15 @@ reg = <0x0 0x60000000 0x0 0x3900000>; no-map; }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; }; rpm-glink { @@ -595,13 +614,6 @@ bias-pull-up; drive-strength = <10>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-pull-up; - drive-strength = <2>; - }; }; sdc2_state_off: sdc2-off-state { @@ -622,13 +634,6 @@ bias-pull-up; drive-strength = <2>; }; - - sd-cd-pins { - pins = "gpio88"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; }; }; @@ -642,7 +647,7 @@ #power-domain-cells = <1>; }; - usb_1_hsphy: phy@1613000 { + usb_hsphy: phy@1613000 { compatible = "qcom,sm6115-qusb2-phy"; reg = <0x0 0x01613000 0x0 0x180>; #phy-cells = <0>; @@ -731,10 +736,6 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; - pinctrl-0 = <&sdc1_state_on>; - pinctrl-1 = <&sdc1_state_off>; - pinctrl-names = "default", "sleep"; - bus-width = <8>; status = "disabled"; }; @@ -753,10 +754,6 @@ <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; - pinctrl-0 = <&sdc2_state_on>; - pinctrl-1 = <&sdc2_state_off>; - pinctrl-names = "default", "sleep"; - power-domains = <&rpmpd SM6115_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0x00a0 0x0>; @@ -1082,7 +1079,7 @@ }; }; - usb_1: usb@4ef8800 { + usb: usb@4ef8800 { compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; reg = <0x0 0x04ef8800 0x0 0x400>; #address-cells = <2>; @@ -1110,11 +1107,11 @@ qcom,select-utmi-as-pipe-clk; status = "disabled"; - usb_1_dwc3: usb@4e00000 { + usb_dwc3: usb@4e00000 { compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_1_hsphy>; + phys = <&usb_hsphy>; phy-names = "usb2-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; @@ -1122,11 +1119,46 @@ snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; - maximum-speed = "high-speed"; - dr_mode = "peripheral"; }; }; + gpucc: clock-controller@5990000 { + compatible = "qcom,sm6115-gpucc"; + reg = <0x0 0x05990000 0x0 0x9000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@59a0000 { + compatible = "qcom,sm6115-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x059a0000 0x0 0x10000>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "mem", + "hlos", + "iface"; + power-domains = <&gpucc GPU_CX_GDSC>; + + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + mdss: display-subsystem@5e00000 { compatible = "qcom,sm6115-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; @@ -1219,7 +1251,7 @@ }; mdss_dsi0: dsi@5e94000 { - compatible = "qcom,dsi-ctrl-6g-qcm2290"; + compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0 0x05e94000 0x0 0x400>; reg-names = "dsi_ctrl"; @@ -1323,6 +1355,39 @@ #power-domain-cells = <1>; }; + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + stm@8002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x0 0x08002000 0x0 0x1000>, @@ -1935,6 +2000,157 @@ }; }; + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDD_LPI_CX>, + <&rpmpd SM6115_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x01c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x01c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x01c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x01c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x01c7 0x0>; + }; + }; + }; + }; + + remoteproc_cdsp: remoteproc@b300000 { + compatible = "qcom,sm6115-cdsp-pas"; + reg = <0x0 0x0b300000 0x0 0x100000>; + + interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6115_VDDCX>; + + memory-region = <&pil_cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 28>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x0>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x0c600000 0x0 0x80000>; @@ -2038,7 +2254,8 @@ }; apcs_glb: mailbox@f111000 { - compatible = "qcom,sm6115-apcs-hmss-global"; + compatible = "qcom,sm6115-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x0 0x0f111000 0x0 0x1000>; #mbox-cells = <1>; @@ -2115,7 +2332,7 @@ }; cpufreq_hw: cpufreq@f521000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm6115-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0x0 0x0f521000 0x0 0x1000>, <0x0 0x0f523000 0x0 0x1000>; @@ -2124,6 +2341,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index 4ce2d905d70e..ea3340d31110 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -49,7 +49,18 @@ gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; + }; + }; + + reserved-memory { + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x20000>; + ecc-size = <16>; }; }; }; @@ -78,6 +89,21 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm6115/LENOVO/J606F/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm6115/LENOVO/J606F/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -273,17 +299,31 @@ status = "okay"; }; -&usb_1 { +&usb { status = "okay"; }; -&usb_1_hsphy { +&usb_dwc3 { + maximum-speed = "high-speed"; + dr_mode = "peripheral"; +}; + +&usb_hsphy { vdd-supply = <&pm6125_l4>; vdda-pll-supply = <&pm6125_l12>; vdda-phy-dpdm-supply = <&pm6125_l15>; status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&pm6125_l8>; + vdd-1.8-xo-supply = <&pm6125_l16>; + vdd-1.3-rfa-supply = <&pm6125_l17>; + vdd-3.3-ch0-supply = <&pm6125_l23>; + qcom,ath10k-calibration-variant = "Lenovo_P11"; + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts index b22b3f9a910d..9f8a9ef398a2 100644 --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts @@ -468,7 +468,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts new file mode 100644 index 000000000000..b1038eb8cebc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "sm6125.dtsi" +#include "pm6125.dtsi" + +/ { + model = "Xiaomi Mi A3"; + compatible = "xiaomi,laurel-sprout", "qcom,sm6125"; + chassis-type = "handset"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <394 0>; /* sm6125 v1 */ + qcom,board-id = <11 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@5c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x5c000000 0 (1560 * 720 * 4)>; + width = <720>; + height = <1560>; + stride = <(720 * 4)>; + format = "a8r8g8b8"; + }; + }; + + reserved-memory { + debug_mem: debug@ffb00000 { + reg = <0x0 0xffb00000 0x0 0xc0000>; + no-map; + }; + + last_log_mem: lastlog@ffbc0000 { + reg = <0x0 0xffbc0000 0x0 0x80000>; + no-map; + }; + + pstore_mem: ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc40000 0x0 0xc0000>; + record-size = <0x1000>; + console-size = <0x40000>; + msg-size = <0x20000 0x20000>; + }; + + cmdline_mem: memory@ffd00000 { + reg = <0x0 0xffd40000 0x0 0x1000>; + no-map; + }; + }; + + extcon_usb: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + thermal-zones { + rf-pa0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <5000>; + thermal-sensors = <&pm6125_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm6125_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; + +&hsusb_phy1 { + vdd-supply = <&vreg_l7a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-dpdm-supply = <&vreg_l15a>; + status = "okay"; +}; + +&pm6125_adc { + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>; + + adc-chan@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "rf_pa0_therm"; + }; + + adc-chan@4e { + reg = <ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "quiet_therm"; + }; + + adc-chan@52 { + reg = <ADC5_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "camera_flash_therm"; + }; + + adc-chan@54 { + reg = <ADC5_GPIO3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "emmc_ufs_therm"; + }; +}; + +&pm6125_adc_tm { + status = "okay"; + + rf-pa0-therm@0 { + reg = <0>; + io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + xo-therm@2 { + reg = <2>; + io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6125_gpios { + camera_flash_therm: camera-flash-therm-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + emmc_ufs_therm: emmc-ufs-therm-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; + + vol_up_n: vol-up-n-state { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm6125-regulators"; + + vreg_s6a: s6 { + regulator-min-microvolt = <936000>; + regulator-max-microvolt = <1422000>; + }; + + vreg_l1a: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + }; + + vreg_l2a: l2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1056000>; + }; + + vreg_l3a: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1064000>; + }; + + vreg_l4a: l4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + regulator-allow-set-load; + }; + + vreg_l5a: l5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l6a: l6 { + regulator-min-microvolt = <576000>; + regulator-max-microvolt = <656000>; + }; + + vreg_l7a: l7 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <976000>; + }; + + vreg_l8a: l8 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + + vreg_l9a: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + }; + + vreg_l10a: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-allow-set-load; + }; + + vreg_l11a: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-allow-set-load; + }; + + vreg_l12a: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1996000>; + }; + + vreg_l13a: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + }; + + vreg_l14a: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l15a: l15 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3232000>; + }; + + vreg_l16a: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + }; + + vreg_l17a: l17 { + regulator-min-microvolt = <1248000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1264000>; + regulator-allow-set-load; + }; + + vreg_l19a: l19 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l20a: l20 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <2952000>; + }; + + vreg_l21a: l21 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2856000>; + }; + + vreg_l22a: l22 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + vreg_l23a: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + }; + + vreg_l24a: l24 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + }; +}; + +&sdc2_off_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&sdc2_on_state { + sd-cd-pins { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vreg_l22a>; + vqmmc-supply = <&vreg_l5a>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <22 2>, <28 6>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l24a>; + vccq2-supply = <&vreg_l11a>; + vcc-max-microamp = <600000>; + vccq2-max-microamp = <600000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l10a>; + vdda-phy-max-microamp = <51400>; + vdda-pll-max-microamp = <14200>; + vddp-ref-clk-supply = <&vreg_l18a>; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + extcon = <&extcon_usb>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 65033227718a..9484752fb850 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -737,6 +737,70 @@ status = "disabled"; }; + ufs_mem_hc: ufs@4804000 { + compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x04804000 0x3000>, <0x04810000 0x8000>; + reg-names = "std", "ice"; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + freq-table-hz = <50000000 240000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <75000000 300000000>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + #reset-cells = <1>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + lanes-per-direction = <1>; + + iommus = <&apps_smmu 0x200 0x0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@4807000 { + compatible = "qcom,sm6125-qmp-ufs-phy"; + reg = <0x04807000 0xdb8>; + + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + #phy-cells = <0>; + + status = "disabled"; + }; + gpi_dma0: dma-controller@4a00000 { compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma"; reg = <0x04a00000 0x60000>; @@ -1134,7 +1198,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@c600000 { @@ -1211,7 +1274,8 @@ }; apcs_glb: mailbox@f111000 { - compatible = "qcom,sm6125-apcs-hmss-global"; + compatible = "qcom,sm6125-apcs-hmss-global", + "qcom,msm8994-apcs-kpss-global"; reg = <0x0f111000 0x1000>; #mbox-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 4916d0db5b47..dddd6e44d280 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -233,7 +233,6 @@ regulator-allow-set-load; regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; - }; pm6150l_l7: ldo7 { @@ -255,7 +254,6 @@ regulator-allow-set-load; regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; - }; pm6150l_l10: ldo10 { @@ -369,7 +367,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 1e1d366c92c1..18c4616848ce 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -46,6 +46,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -71,6 +72,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -92,6 +94,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -113,6 +116,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -134,6 +138,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -155,6 +160,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; @@ -170,13 +176,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; @@ -198,6 +204,7 @@ device_type = "cpu"; compatible = "qcom,kryo560"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1894>; dynamic-power-coefficient = <703>; @@ -880,7 +887,6 @@ interconnect-names = "qup-core", "qup-config", "qup-memory"; status = "disabled"; }; - }; config_noc: interconnect@1500000 { @@ -1348,7 +1354,7 @@ system-cache-controller@9200000 { compatible = "qcom,sm6350-llcc"; reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg-names = "llcc0_base", "llcc_broadcast_base"; }; gem_noc: interconnect@9680000 { @@ -1995,13 +2001,14 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; reg-names = "freq-domain0", "freq-domain1"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index b691c3834b6b..8220e6f44117 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -46,6 +46,23 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&vol_down_n>; + pinctrl-names = "default"; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + reserved-memory { cont_splash_mem: memory@85200000 { reg = <0 0x85200000 0 0xc00000>; @@ -133,6 +150,16 @@ status = "okay"; }; +&pmr735a_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + &pon_pwrkey { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 068ee4f72485..ae9b6bc446cb 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/clock/qcom,sm6375-gcc.h> #include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -39,6 +40,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -58,6 +60,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -74,6 +77,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -90,6 +94,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -106,6 +111,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -122,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -132,13 +139,13 @@ compatible = "cache"; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -155,6 +162,7 @@ device_type = "cpu"; compatible = "qcom,kryo660"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -208,6 +216,16 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; + idle-state-name = "silver-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; idle-state-name = "silver-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; entry-latency-us = <702>; @@ -218,6 +236,16 @@ BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; + idle-state-name = "gold-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; idle-state-name = "gold-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; entry-latency-us = <526>; @@ -230,12 +258,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x41000044>; entry-latency-us = <2752>; exit-latency-us = <3048>; min-residency-us = <6118>; - local-timer-stop; }; }; }; @@ -267,49 +293,49 @@ CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD4: power-domain-cpu4 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD5: power-domain-cpu5 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; }; CPU_PD6: power-domain-cpu6 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; }; CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; + domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; }; CLUSTER_PD: power-domain-cpu-cluster0 { @@ -424,6 +450,15 @@ no-map; }; + rmtfs_mem: rmtfs@f3900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf3900000 0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; + }; + debug_mem: debug@ffb00000 { reg = <0 0xffb00000 0 0xc0000>; no-map; @@ -555,6 +590,47 @@ }; }; + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -713,11 +789,38 @@ #interrupt-cells = <4>; }; + tsens0: thermal-sensor@4411000 { + compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; + reg = <0 0x04411000 0 0x140>, /* TM */ + <0 0x04410000 0 0x20>; /* SROT */ + interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + #qcom,sensors = <15>; + }; + + tsens1: thermal-sensor@4413000 { + compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; + reg = <0 0x04413000 0 0x140>, /* TM */ + <0 0x04412000 0 0x20>; /* SROT */ + interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + #qcom,sensors = <11>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0 0x045f0000 0 0x7000>; }; + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0 0x04690000 0 0x400>; + }; + sdhc_2: mmc@4784000 { compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x04784000 0 0x1000>; @@ -1155,6 +1258,47 @@ }; }; + remoteproc_mss: remoteproc@6000000 { + compatible = "qcom,sm6375-mpss-pas"; + reg = <0 0x06000000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd SM6375_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&pil_mpss_wlan_mem>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + remoteproc_adsp: remoteproc@a400000 { compatible = "qcom,sm6375-adsp-pas"; reg = <0 0x0a400000 0 0x100>; @@ -1229,6 +1373,20 @@ }; }; + sram@c125000 { + compatible = "qcom,sm6375-imem", "syscon", "simple-mfd"; + reg = <0 0x0c125000 0 0x1000>; + ranges = <0 0 0x0c125000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@c600000 { compatible = "qcom,sm6375-smmu-500", "arm,mmu-500"; reg = <0 0x0c600000 0 0x100000>; @@ -1305,6 +1463,28 @@ #iommu-cells = <2>; }; + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x0c800000 0 0x800000>; + reg-names = "membase"; + memory-region = <&pil_wlan_mem>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x80 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */ @@ -1373,6 +1553,15 @@ }; }; + cpucp_l3: interconnect@fd90000 { + compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3"; + reg = <0 0x0fd90000 0 0x1000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + cpufreq_hw: cpufreq@fd91000 { compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss"; reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>; @@ -1384,6 +1573,711 @@ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss0_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cluster1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-unk0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu_unk0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-unk1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu_unk1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_unk1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mapss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + mapss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss1_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cwlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cwlan_crit: cwlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + audio_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + audio_crit: audio-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr_crit: ddr-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + q6hvx-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + q6hvx_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + q6hvx_crit: q6hvx-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-core0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + mdm_core0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core0_crit: mdm-core0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-core1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdm_core1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_core1_crit: mdm-core1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-vec-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + mdm_vec_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_vec_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm_vec_crit: mdm-vec-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + msm-scl-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + msm_scl_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + msm_scl_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + msm_scl_crit: msm-scl-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index 8f014a232526..c0200e7f3f74 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -359,6 +359,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts index 69024f7c7f10..b039773c4465 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts @@ -479,7 +479,6 @@ pins = "gpio42"; function = "gpio"; bias-pull-up; - input-enable; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index eff995a07ab7..34ec84916bdd 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -354,6 +354,11 @@ }; &gpu { + /* + * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it + * after display support is added on this board. + */ + compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi index ff77cc3c879a..47e2430991ca 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi @@ -59,7 +59,7 @@ gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; key-camera-snapshot { @@ -68,7 +68,7 @@ gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; key-vol-down { @@ -77,7 +77,7 @@ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 13e0ce828606..2273fa571988 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -48,6 +48,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -74,6 +75,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -90,13 +92,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU2: cpu@200 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -119,6 +121,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <488>; dynamic-power-coefficient = <232>; @@ -141,6 +144,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -163,6 +167,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -185,6 +190,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <369>; @@ -207,6 +213,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <421>; @@ -288,12 +295,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -945,6 +950,17 @@ status = "disabled"; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8150-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; + }; qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; @@ -1334,6 +1350,20 @@ status = "disabled"; }; + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00a84000 0x0 0x4000>; + reg-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart9_default>; + pinctrl-names = "default"; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c10: i2c@a88000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a88000 0 0x4000>; @@ -1772,8 +1802,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8150-llcc"; - reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; }; @@ -1799,8 +1832,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1826,7 +1859,6 @@ "slave_q2a", "tbu"; - iommus = <&apps_smmu 0x1d80 0x3f>; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1895,7 +1927,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>; @@ -1925,7 +1957,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1e00 0x3f>; iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, <0x100 &apps_smmu 0x1e01 0x1>; @@ -2133,15 +2164,7 @@ }; gpu: gpu@2c00000 { - /* - * note: the amd,imageon compatible makes it possible - * to use the drm/msm driver without the display node, - * make sure to remove it when display node is added - */ - compatible = "qcom,adreno-640.1", - "qcom,adreno", - "amd,imageon"; - + compatible = "qcom,adreno-640.1", "qcom,adreno"; reg = <0 0x02c00000 0 0x40000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2153,44 +2176,52 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 675 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-675000000 { opp-hz = /bits/ 64 <675000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0x2>; }; opp-585000000 { opp-hz = /bits/ 64 <585000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0x3>; }; opp-499200000 { opp-hz = /bits/ 64 <499200000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0x3>; }; opp-427000000 { opp-hz = /bits/ 64 <427000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0x3>; }; opp-345000000 { opp-hz = /bits/ 64 <345000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0x3>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0x3>; }; }; }; @@ -2249,7 +2280,8 @@ }; adreno_smmu: iommu@2ca0000 { - compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x02ca0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <1>; @@ -2425,6 +2457,13 @@ bias-disable; }; + qup_uart9_default: qup-uart9-default-state { + pins = "gpio41", "gpio42"; + function = "qup9"; + drive-strength = <2>; + bias-disable; + }; + qup_i2c10_default: qup-i2c10-default-state { pins = "gpio9", "gpio10"; function = "qup10"; @@ -3935,7 +3974,6 @@ #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; - cell-index = <0>; }; apps_smmu: iommu@15000000 { @@ -4097,7 +4135,8 @@ }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sm8150-apss-shared"; + compatible = "qcom,sm8150-apss-shared", + "qcom,sdm845-apss-shared"; reg = <0x0 0x17c00000 0x0 0x1000>; #mbox-cells = <1>; }; @@ -4263,7 +4302,7 @@ }; cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, <0 0x18327800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1", @@ -4273,6 +4312,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; lmh_cluster1: lmh@18350800 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts index 5ecf7dafb2ec..01fe3974ee72 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts @@ -26,7 +26,7 @@ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi index b9c982a059df..2f22d348d45d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi @@ -63,7 +63,7 @@ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -625,7 +625,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; ap2mdm_default: ap2mdm-default-state { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts new file mode 100644 index 000000000000..8b2ae39950ff --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (BOE)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-boe-nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index a85d47f7a9e8..8af6a0120a50 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -3,9 +3,8 @@ * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com> */ -/dts-v1/; - #include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" #include "pm8150.dtsi" @@ -24,8 +23,6 @@ /delete-node/ &xbl_aop_mem; / { - model = "Xiaomi Mi Pad 5 Pro"; - compatible = "xiaomi,elish", "qcom,sm8250"; classis-type = "tablet"; /* required for bootloader to select correct board */ @@ -95,7 +92,7 @@ linux,code = <KEY_VOLUMEUP>; debounce-interval = <15>; linux,can-disable; - gpio-key,wakeup; + wakeup-source; }; }; @@ -473,6 +470,76 @@ status = "okay"; }; +&dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + status = "okay"; +}; + +&dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + &gmu { status = "okay"; }; @@ -537,6 +604,10 @@ }; }; +&mdss { + status = "okay"; +}; + &pcie0 { status = "okay"; }; @@ -595,7 +666,7 @@ &usb_1_dwc3 { dr_mode = "peripheral"; - maximum-spped = "high-speed"; + maximum-speed = "high-speed"; /* Remove USB3 phy */ phys = <&usb_1_hsphy>; phy-names = "usb2-phy"; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts new file mode 100644 index 000000000000..a4d5341495cf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +/dts-v1/; + +#include "sm8250-xiaomi-elish-common.dtsi" + +/ { + model = "Xiaomi Mi Pad 5 Pro (CSOT)"; + compatible = "xiaomi,elish", "qcom,sm8250"; +}; + +&display_panel { + compatible = "xiaomi,elish-csot-nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 2f0e460acccd..7bea916900e2 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -97,6 +97,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -127,6 +128,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -151,6 +153,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -175,6 +178,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; capacity-dmips-mhz = <448>; dynamic-power-coefficient = <205>; @@ -199,6 +203,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -223,6 +228,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -241,13 +247,13 @@ cache-unified; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <379>; @@ -272,6 +278,7 @@ device_type = "cpu"; compatible = "qcom,kryo485"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <444>; @@ -355,12 +362,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-llcc-off"; arm,psci-suspend-param = <0x4100c244>; entry-latency-us = <3264>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -955,6 +960,18 @@ #mbox-cells = <2>; }; + qfprom: efuse@784000 { + compatible = "qcom,sm8250-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@19b { + reg = <0x19b 0x1>; + bits = <5 3>; + }; + }; + rng: rng@793000 { compatible = "qcom,prng-ee"; reg = <0 0x00793000 0 0x1000>; @@ -1824,8 +1841,9 @@ <0 0x60000000 0 0xf1d>, <0 0x60000f20 0 0xa8>, <0 0x60001000 0 0x1000>, - <0 0x60100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x60100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <0>; bus-range = <0x00 0xff>; @@ -1834,8 +1852,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1871,7 +1889,6 @@ "tbu", "ddrss_sf_tbu"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1933,8 +1950,9 @@ <0 0x40000000 0 0xf1d>, <0 0x40000f20 0 0xa8>, <0 0x40001000 0 0x1000>, - <0 0x40100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x40100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <1>; bus-range = <0x00 0xff>; @@ -1943,7 +1961,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; @@ -1977,7 +1995,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -2041,8 +2058,9 @@ <0 0x64000000 0 0xf1d>, <0 0x64000f20 0 0xa8>, <0 0x64001000 0 0x1000>, - <0 0x64100000 0 0x100000>; - reg-names = "parf", "dbi", "elbi", "atu", "config"; + <0 0x64100000 0 0x100000>, + <0 0x01c13000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; device_type = "pci"; linux,pci-domain = <2>; bus-range = <0x00 0xff>; @@ -2051,7 +2069,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>, + ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>, <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>; interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; @@ -2085,7 +2103,6 @@ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, <0x100 &apps_smmu 0x1d01 0x1>; @@ -2359,7 +2376,7 @@ swr2: soundwire-controller@3230000 { reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; - interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core"; status = "disabled"; @@ -2420,7 +2437,6 @@ drive-strength = <2>; slew-rate = <1>; bias-bus-hold; - }; }; @@ -2429,7 +2445,6 @@ pins = "gpio10"; function = "wsa_swr_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; @@ -2437,9 +2452,7 @@ pins = "gpio11"; function = "wsa_swr_data"; drive-strength = <2>; - input-enable; bias-pull-down; - }; }; @@ -2454,7 +2467,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -2472,7 +2484,6 @@ function = "dmic1_data"; drive-strength = <2>; bias-pull-down; - input-enable; }; }; @@ -2517,7 +2528,6 @@ pins = "gpio0"; function = "swr_tx_clk"; drive-strength = <2>; - input-enable; bias-pull-down; }; @@ -2525,7 +2535,6 @@ pins = "gpio1"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-bus-hold; }; @@ -2533,7 +2542,6 @@ pins = "gpio2"; function = "swr_tx_data"; drive-strength = <2>; - input-enable; bias-pull-down; }; }; @@ -2554,49 +2562,58 @@ qcom,gmu = <&gmu>; + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + status = "disabled"; zap-shader { memory-region = <&gpu_mem>; }; - /* note: downstream checks gpu binning for 670 Mhz */ gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-670000000 { opp-hz = /bits/ 64 <670000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-supported-hw = <0xa>; }; opp-587000000 { opp-hz = /bits/ 64 <587000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-supported-hw = <0xb>; }; opp-525000000 { opp-hz = /bits/ 64 <525000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + opp-supported-hw = <0xf>; }; opp-490000000 { opp-hz = /bits/ 64 <490000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-supported-hw = <0xf>; }; opp-441600000 { opp-hz = /bits/ 64 <441600000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + opp-supported-hw = <0xf>; }; opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-supported-hw = <0xf>; }; opp-305000000 { opp-hz = /bits/ 64 <305000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-supported-hw = <0xf>; }; }; }; @@ -2656,7 +2673,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x10000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2763,6 +2781,73 @@ }; }; + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0 0x06004000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpda_out_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_in_tpda>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@9 { + reg = <9>; + tpda_9_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_tpda9>; + }; + }; + + port@17 { + reg = <23>; + tpda_23_in_tpdm_prng: endpoint { + remote-endpoint = <&tpdm_prng_out_tpda_23>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06005000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_qatb_out_funnel_in0: endpoint { + remote-endpoint = <&funnel_in0_in_funnel_qatb>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_qatb_in_tpda: endpoint { + remote-endpoint = <&tpda_out_funnel_qatb>; + }; + }; + }; + }; + funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x06041000 0 0x1000>; @@ -2782,6 +2867,13 @@ #address-cells = <1>; #size-cells = <0>; + port@6 { + reg = <6>; + funnel_in0_in_funnel_qatb: endpoint { + remote-endpoint = <&funnel_qatb_out_funnel_in0>; + }; + }; + port@7 { reg = <7>; funnel0_in7: endpoint { @@ -2799,11 +2891,7 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_in1_out_funnel_merg: endpoint { remote-endpoint = <&funnel_merg_in_funnel_in1>; }; @@ -2899,12 +2987,27 @@ }; }; + tpdm@684c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x0684c000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_prng_out_tpda_23: endpoint { + remote-endpoint = <&tpda_23_in_tpdm_prng>; + }; + }; + }; + }; + funnel@6b04000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; arm,primecell-periphid = <0x000bb908>; reg = <0 0x06b04000 0 0x1000>; - reg-names = "funnel-base"; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -2928,7 +3031,6 @@ }; }; }; - }; etf@6b05000 { @@ -2983,6 +3085,80 @@ }; }; + tpdm@6c08000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0 0x06c08000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + tpdm_mm_out_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>; + }; + }; + }; + }; + + funnel@6c0b000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c0b000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_dl_mm_out_funnel_dl_center: endpoint { + remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + funnel_dl_mm_in_tpdm_mm: endpoint { + remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>; + }; + }; + }; + }; + + funnel@6c2d000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06c2d000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + port { + tpdm_mm_out_tpda9: endpoint { + remote-endpoint = <&tpda_9_in_tpdm_mm>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + funnel_dl_center_in_funnel_dl_mm: endpoint { + remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>; + }; + }; + }; + }; + etm@7040000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x07040000 0 0x1000>; @@ -3220,9 +3396,6 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - port { funnel_apss_merg_out_funnel_in1: endpoint { remote-endpoint = <&funnel_in1_in_funnel_apss_merg>; @@ -3559,8 +3732,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8250-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>, + <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>, + <0 0x09600000 0 0x50000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; }; usb_2: usb@a8f8800 { @@ -5481,6 +5657,7 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 09baf6959c71..2ee1b121686a 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -31,6 +31,40 @@ }; }; + pmic-glink { + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -644,7 +678,6 @@ bias-pull-up; }; }; - }; &uart2 { @@ -674,8 +707,16 @@ }; &usb_1_dwc3 { - /* TODO: Define USB-C connector properly */ - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts index b536ae36ae6d..3bd5e57cbcda 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts @@ -341,6 +341,9 @@ &usb_1 { status = "okay"; +}; + +&usb_1_dwc3 { dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi index 89382ad73133..7ae1eb0a7cce 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi @@ -877,7 +877,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; sdc2_card_det_active: sd-card-det-active-state { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 1a5a612d4234..ebcb481571c2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/thermal/thermal.h> @@ -49,6 +50,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -70,6 +72,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -87,6 +90,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -104,6 +108,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -121,6 +126,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -138,6 +144,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -149,13 +156,13 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; @@ -173,6 +180,7 @@ device_type = "cpu"; compatible = "qcom,kryo685"; reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; @@ -249,12 +257,10 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <3263>; exit-latency-us = <6562>; min-residency-us = <9987>; - local-timer-stop; }; }; }; @@ -653,7 +659,7 @@ <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, <&ufs_mem_phy_lanes 2>, - <0>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; }; @@ -1487,8 +1493,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -1526,7 +1532,6 @@ "aggre1", "aggre0"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1581,8 +1586,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1610,7 +1615,6 @@ "ddrss_sf_tbu", "aggre1"; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1908,7 +1912,8 @@ }; adreno_smmu: iommu@3da0000 { - compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x03da0000 0 0x20000>; #iommu-cells = <2>; #global-interrupts = <2>; @@ -2126,37 +2131,24 @@ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8350-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8350-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; usb_2_qmpphy: phy-wrapper@88eb000 { @@ -2205,8 +2197,11 @@ system-cache-controller@9200000 { compatible = "qcom,sm8350-llcc"; - reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; }; compute_noc: interconnect@a0c0000 { @@ -2259,8 +2254,27 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -2418,6 +2432,85 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; + }; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8350_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; }; @@ -2624,8 +2717,8 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; clock-names = "bi_tcxo", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", @@ -3241,6 +3334,7 @@ clock-names = "xo", "alternate"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; cdsp: remoteproc@98900000 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index feef3837e4cd..e931545a2cac 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -25,7 +25,7 @@ }; wcd938x: audio-codec { - compatible = "qcom,wcd9380-codec"; + compatible = "qcom,wcd9385-codec"; pinctrl-names = "default"; pinctrl-0 = <&wcd_default>; @@ -87,6 +87,40 @@ enable-active-high; }; + pmic-glink { + compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -343,7 +377,6 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; regulators-3 { @@ -724,7 +757,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { @@ -755,7 +797,7 @@ spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio1"; function = "gpio"; - drive-strength = <4>; + drive-strength = <16>; bias-disable; output-low; }; @@ -763,14 +805,16 @@ spkr_2_sd_n_active: spkr-2-sd-n-active-state { pins = "gpio89"; function = "gpio"; - drive-strength = <4>; + drive-strength = <16>; bias-disable; output-low; }; - wcd_default: wcd-default-state { + wcd_default: wcd-reset-n-active-state { pins = "gpio43"; function = "gpio"; + drive-strength = <16>; bias-disable; + output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts index f7592946c783..65a94dfaf5ae 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts @@ -282,7 +282,6 @@ regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - }; regulators-3 { diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi index 67538b5a557e..001fb2723fbb 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi @@ -754,7 +754,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; telec_pwr_en: telec-pwr-en-state { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index b285b1530c10..595533aeafc4 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,sm8450.h> #include <dt-bindings/soc/qcom,gpr.h> @@ -154,7 +155,6 @@ cache-level = <2>; next-level-cache = <&L3_0>; }; - }; CPU6: cpu@600 { @@ -256,22 +256,18 @@ domain-idle-states { CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; - idle-state-name = "cluster-l3-off"; arm,psci-suspend-param = <0x41000044>; entry-latency-us = <1050>; exit-latency-us = <2500>; min-residency-us = <5309>; - local-timer-stop; }; CLUSTER_SLEEP_1: cluster-sleep-1 { compatible = "domain-idle-state"; - idle-state-name = "cluster-power-collapse"; arm,psci-suspend-param = <0x4100c344>; entry-latency-us = <2700>; exit-latency-us = <3500>; min-residency-us = <13959>; - local-timer-stop; }; }; }; @@ -748,7 +744,7 @@ <&ufs_mem_phy_lanes 0>, <&ufs_mem_phy_lanes 1>, <&ufs_mem_phy_lanes 2>, - <0>; + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "sleep_clk", "pcie_0_pipe_clk", @@ -1746,8 +1742,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; /* * MSIs for BDF (1:0.0) only works with Device ID 0x5980. @@ -1790,7 +1786,6 @@ "aggre0", "aggre1"; - iommus = <&apps_smmu 0x1c00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, <0x100 &apps_smmu 0x1c01 0x1>; @@ -1798,7 +1793,6 @@ reset-names = "pci"; power-domains = <&gcc PCIE_0_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie0_lane>; phy-names = "pciephy"; @@ -1862,8 +1856,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; /* * MSIs for BDF (1:0.0) only works with Device ID 0x5a00. @@ -1904,7 +1898,6 @@ "ddrss_sf_tbu", "aggre1"; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1912,13 +1905,12 @@ reset-names = "pci"; power-domains = <&gcc PCIE_1_GDSC>; - power-domain-names = "gdsc"; phys = <&pcie1_lane>; phy-names = "pciephy"; - perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>; - enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; @@ -2034,37 +2026,24 @@ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; - usb_1_qmpphy: phy-wrapper@88e9000 { - compatible = "qcom,sm8450-qmp-usb3-phy"; - reg = <0 0x088e9000 0 0x200>, - <0 0x088e8000 0 0x20>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sm8450-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "com_aux"; + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "usb3_pipe"; resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, <&gcc GCC_USB3_PHY_PRIM_BCR>; reset-names = "phy", "common"; - usb_1_ssphy: phy@88e9200 { - reg = <0 0x088e9200 0 0x200>, - <0 0x088e9400 0 0x200>, - <0 0x088e9c00 0 0x400>, - <0 0x088e9600 0 0x200>, - <0 0x088e9800 0 0x200>, - <0 0x088e9a00 0 0x100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; }; remoteproc_slpi: remoteproc@2400000 { @@ -2154,13 +2133,13 @@ #sound-dai-cells = <1>; }; - /* WSA2 */ swr4: soundwire-controller@31f0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x031f0000 0 0x2000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsa2macro>; clock-names = "iface"; + label = "WSA2"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2269,13 +2248,13 @@ #sound-dai-cells = <1>; }; - /* WSA */ swr0: soundwire-controller@3250000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03250000 0 0x2000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&wsamacro>; clock-names = "iface"; + label = "WSA"; qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2299,8 +2278,8 @@ swr2: soundwire-controller@33b0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x033b0000 0 0x2000>; - interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; clocks = <&vamacro>; @@ -2763,6 +2742,12 @@ }; }; + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -2795,6 +2780,78 @@ }; }; + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,sm8450-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0xc00>, + <0 0xae91000 0 0x400>, + <0 0xae91400 0 0x400>; + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -2972,8 +3029,8 @@ <&mdss_dsi0_phy 1>, <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>, - <0>, /* dp0 */ - <0>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, <0>, /* dp1 */ <0>, <0>, /* dp2 */ @@ -3569,7 +3626,6 @@ pins = "gpio76", "gpio77", "gpio78", "gpio79"; function = "qup20"; }; - }; lpass_tlmm: pinctrl@3440000 { @@ -3632,7 +3688,6 @@ pins = "gpio7"; function = "dmic1_data"; drive-strength = <8>; - input-enable; }; }; @@ -3648,7 +3703,6 @@ pins = "gpio9"; function = "dmic2_data"; drive-strength = <8>; - input-enable; }; }; @@ -3689,6 +3743,20 @@ }; }; + sram@146aa000 { + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; + reg = <0 0x146aa000 0 0x1000>; + ranges = <0 0 0x146aa000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -3981,8 +4049,11 @@ system-cache-controller@19200000 { compatible = "qcom,sm8450-llcc"; - reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>; - reg-names = "llcc_base", "llcc_broadcast_base"; + reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>, + <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>, + <0 0x19a00000 0 0x80000>; + reg-names = "llcc0_base", "llcc1_base", "llcc2_base", + "llcc3_base", "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; }; @@ -4154,8 +4225,27 @@ iommus = <&apps_smmu 0x0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 5db6e789e6b8..e2b9bb6b1e27 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -27,6 +27,40 @@ stdout-path = "serial0:115200n8"; }; + pmic-glink { + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -414,18 +448,27 @@ &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + status = "okay"; }; &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; + status = "okay"; }; &pcie1 { wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + status = "okay"; }; @@ -433,6 +476,7 @@ vdda-phy-supply = <&vreg_l3c_0p91>; vdda-pll-supply = <&vreg_l3e_1p2>; vdda-qref-supply = <&vreg_l1e_0p88>; + status = "okay"; }; @@ -447,6 +491,11 @@ }; }; +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -546,13 +595,24 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; + phys = <&pm8550b_eusb2_repeater>; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts new file mode 100644 index 000000000000..d5a645ee2a61 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8550.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8550 QRD"; + compatible = "qcom,sm8550-qrd", "qcom,sm8550"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s4g_1p25>; + vdd-l12-supply = <&vreg_s6g_1p86>; + vdd-l15-supply = <&vreg_s6g_1p86>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l3c_0p9: ldo3 { + regulator-name = "vreg_l3c_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* ldo2 supplies SM8550 VDD_LPI_MX */ + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s4e_0p95: smps4 { + regulator-name = "vreg_s4e_0p95"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_1p08: smps5 { + regulator-name = "vreg_s5e_1p08"; + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p88: ldo1 { + regulator-name = "vreg_l1e_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2e_0p9: ldo2 { + regulator-name = "vreg_l2e_0p9"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s4e_0p95>; + vdd-l2-supply = <&vreg_s4e_0p95>; + vdd-l3-supply = <&vreg_s4e_0p95>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4f_0p5: smps4 { + regulator-name = "vreg_s4f_0p5"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <700000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_0p9: ldo1 { + regulator-name = "vreg_l1f_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_0p88: ldo2 { + regulator-name = "vreg_l2f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_0p88: ldo3 { + regulator-name = "vreg_l3f_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + qcom,pmic-id = "g"; + + vdd-l1-supply = <&vreg_s4g_1p25>; + vdd-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-supply = <&vreg_s4g_1p25>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vreg_s1g_1p25: smps1 { + regulator-name = "vreg_s1g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2g_0p85: smps2 { + regulator-name = "vreg_s2g_0p85"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3g_0p8: smps3 { + regulator-name = "vreg_s3g_0p8"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4g_1p25: smps4 { + regulator-name = "vreg_s4g_1p25"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5g_0p85: smps5 { + regulator-name = "vreg_s5g_0p85"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6g_1p86: smps6 { + regulator-name = "vreg_s6g_1p86"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1g_1p2: ldo1 { + regulator-name = "vreg_l1g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_1p2: ldo3 { + regulator-name = "vreg_l3g_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8550/adsp.mbn", + "qcom/sm8550/adsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8550/cdsp.mbn", + "qcom/sm8550/cdsp_dtb.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8550/modem.mbn", + "qcom/sm8550/modem_dtb.mbn"; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart7 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1g_1p2>; + vccq-max-microamp = <1200000>; + vccq2-supply = <&vreg_l3g_1p2>; + vccq2-max-microamp = <100>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p88>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 5d0888398b3c..f110d6cc195d 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -68,6 +68,7 @@ device_type = "cpu"; compatible = "arm,cortex-a510"; reg = <0 0>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_0>; power-domains = <&CPU_PD0>; @@ -91,6 +92,7 @@ device_type = "cpu"; compatible = "arm,cortex-a510"; reg = <0 0x100>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_100>; power-domains = <&CPU_PD1>; @@ -110,6 +112,7 @@ device_type = "cpu"; compatible = "arm,cortex-a510"; reg = <0 0x200>; + clocks = <&cpufreq_hw 0>; enable-method = "psci"; next-level-cache = <&L2_200>; power-domains = <&CPU_PD2>; @@ -129,6 +132,7 @@ device_type = "cpu"; compatible = "arm,cortex-a715"; reg = <0 0x300>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_300>; power-domains = <&CPU_PD3>; @@ -148,6 +152,7 @@ device_type = "cpu"; compatible = "arm,cortex-a715"; reg = <0 0x400>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_400>; power-domains = <&CPU_PD4>; @@ -167,6 +172,7 @@ device_type = "cpu"; compatible = "arm,cortex-a710"; reg = <0 0x500>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_500>; power-domains = <&CPU_PD5>; @@ -186,6 +192,7 @@ device_type = "cpu"; compatible = "arm,cortex-a710"; reg = <0 0x600>; + clocks = <&cpufreq_hw 1>; enable-method = "psci"; next-level-cache = <&L2_600>; power-domains = <&CPU_PD6>; @@ -205,6 +212,7 @@ device_type = "cpu"; compatible = "arm,cortex-x3"; reg = <0 0x700>; + clocks = <&cpufreq_hw 2>; enable-method = "psci"; next-level-cache = <&L2_700>; power-domains = <&CPU_PD7>; @@ -412,7 +420,6 @@ no-map; }; - hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 { reg = <0 0x811d0000 0 0x30000>; no-map; @@ -1653,8 +1660,8 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; bus-range = <0x00 0xff>; dma-coherent; @@ -1672,27 +1679,25 @@ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; - clock-names = "pipe", - "aux", + clock-names = "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ddrss_sf_tbu", - "aggre0"; + "noc_aggr"; - interconnect-names = "pcie-mem"; - interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; - iommus = <&apps_smmu 0x1400 0x7f>; iommu-map = <0x0 &apps_smmu 0x1400 0x1>, <0x100 &apps_smmu 0x1401 0x1>; @@ -1704,12 +1709,6 @@ phys = <&pcie0_phy>; phy-names = "pciephy"; - perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; - wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_default_state>; - status = "disabled"; }; @@ -1752,8 +1751,8 @@ reg-names = "parf", "dbi", "elbi", "atu", "config"; #address-cells = <3>; #size-cells = <2>; - ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; bus-range = <0x00 0xff>; dma-coherent; @@ -1771,8 +1770,7 @@ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, <&gcc GCC_PCIE_1_SLV_AXI_CLK>, @@ -1780,42 +1778,34 @@ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; - clock-names = "pipe", - "aux", + clock-names = "aux", "cfg", "bus_master", "bus_slave", "slave_q2a", "ddrss_sf_tbu", - "aggre1", - "cnoc_pcie_sf_axi"; + "noc_aggr", + "cnoc_sf_axi"; assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - interconnect-names = "pcie-mem"; - interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>; + interconnect-names = "pcie-mem", "cpu-pcie"; - iommus = <&apps_smmu 0x1480 0x7f>; iommu-map = <0x0 &apps_smmu 0x1480 0x1>, <0x100 &apps_smmu 0x1481 0x1>; resets = <&gcc GCC_PCIE_1_BCR>, <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; - reset-names = "pci", - "pcie_1_link_down_reset"; + reset-names = "pci", "link_down"; power-domains = <&gcc PCIE_1_GDSC>; phys = <&pcie1_phy>; phy-names = "pciephy"; - perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; - enable-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_state>; - status = "disabled"; }; @@ -1823,18 +1813,17 @@ compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy"; reg = <0x0 0x01c0e000 0x0 0x2000>; - clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&tcsr TCSR_PCIE_1_CLKREF_EN>, <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_PHY_AUX_CLK>; + <&gcc GCC_PCIE_1_PIPE_CLK>; clock-names = "aux", "cfg_ahb", "ref", "rchng", - "pipe", "aux_phy"; + "pipe"; resets = <&gcc GCC_PCIE_1_PHY_BCR>, <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; - reset-names = "phy", "nocsr"; + reset-names = "phy", "phy_nocsr"; assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; assigned-clock-rates = <100000000>; @@ -1936,9 +1925,18 @@ <0 0>, <0 0>, <0 0>; + qcom,ice = <&ice>; + status = "disabled"; }; + ice: crypto@1d88000 { + compatible = "qcom,sm8550-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0 0x01f40000 0 0x20000>; @@ -1995,6 +1993,206 @@ }; }; + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa2_swr_active>; + #sound-dai-cells = <1>; + }; + + swr3: soundwire-controller@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&rx_swr_active>; + #sound-dai-cells = <1>; + }; + + swr1: soundwire-controller@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <10>; + + qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&tx_swr_active>; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", "macro", "dcodec", "fsgen"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "mclk"; + pinctrl-names = "default"; + pinctrl-0 = <&wsa_swr_active>; + #sound-dai-cells = <1>; + }; + + swr0: soundwire-controller@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire-controller@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_vamacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", "macro", "dcodec"; + + assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + assigned-clock-rates = <19200000>; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + lpass_tlmm: pinctrl@6e80000 { compatible = "qcom,sm8550-lpass-lpi-pinctrl"; reg = <0 0x06e80000 0 0x20000>, @@ -2006,6 +2204,110 @@ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "core", "audio"; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; }; lpass_lpiaon_noc: interconnect@7400000 { @@ -2211,7 +2513,8 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -2303,8 +2606,10 @@ power-domains = <&rpmhpd SM8550_MMCX>; - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; operating-points-v2 = <&mdss_dsi_opp_table>; @@ -2468,6 +2773,25 @@ phys = <&usb_1_hsphy>, <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -2808,10 +3132,10 @@ }; qup_spi0_cs: qup-spi0-cs-state { - cs-pins { - pins = "gpio31"; - function = "qup1_se0"; - }; + pins = "gpio31"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; }; qup_spi0_data_clk: qup-spi0-data-clk-state { @@ -3172,7 +3496,7 @@ intc: interrupt-controller@17100000 { compatible = "arm,gic-v3"; - reg = <0 0x17100000 0 0x10000>, /* GICD */ + reg = <0 0x17100000 0 0x10000>, /* GICD */ <0 0x17180000 0 0x200000>; /* GICR * 8 */ ranges; #interrupt-cells = <3>; @@ -3340,6 +3664,7 @@ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2"; #freq-domain-cells = <1>; + #clock-cells = <1>; }; pmu@24091000 { @@ -3392,7 +3717,7 @@ }; pmu@240b6400 { - compatible = "qcom,sm8550-cpu-bwmon", "qcom,msm8998-bwmon"; + compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0 0x240b6400 0 0x600>; interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 0699b51c1247..f130165577a8 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -28,10 +28,6 @@ dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb -dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb -dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb -dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb - dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb @@ -67,6 +63,7 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb +dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb @@ -79,9 +76,11 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb +dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index e21653d86228..10abfde329d0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -49,17 +49,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts deleted file mode 100644 index c6ca61a8ed40..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x - * - * Copyright (C) 2015 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r8a77950.dtsi" -#include "salvator-x.dtsi" - -/ { - model = "Renesas Salvator-X board based on r8a77950"; - compatible = "renesas,salvator-x", "renesas,r8a7795"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - memory@500000000 { - device_type = "memory"; - reg = <0x5 0x00000000 0x0 0x40000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x40000000>; - }; - - memory@700000000 { - device_type = "memory"; - reg = <0x7 0x00000000 0x0 0x40000000>; - }; -}; - -&du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>, - <&versaclock5 1>, - <&x21_clk>, - <&x22_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", - "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts deleted file mode 100644 index 85f008ef63de..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES1.x - * - * Copyright (C) 2017 Renesas Electronics Corp. - * Copyright (C) 2017 Cogent Embedded, Inc. - */ - -#include "r8a77950-ulcb.dts" -#include "ulcb-kf.dtsi" - -/ { - model = "Renesas H3ULCB Kingfisher board based on r8a77950"; - compatible = "shimafuji,kingfisher", "renesas,h3ulcb", - "renesas,r8a7795"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts deleted file mode 100644 index 5340579931e3..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES1.x - * - * Copyright (C) 2016 Renesas Electronics Corp. - * Copyright (C) 2016 Cogent Embedded, Inc. - */ - -/dts-v1/; -#include "r8a77950.dtsi" -#include "ulcb.dtsi" - -/ { - model = "Renesas H3ULCB board based on r8a77950"; - compatible = "renesas,h3ulcb", "renesas,r8a7795"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - memory@500000000 { - device_type = "memory"; - reg = <0x5 0x00000000 0x0 0x40000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x40000000>; - }; - - memory@700000000 { - device_type = "memory"; - reg = <0x7 0x00000000 0x0 0x40000000>; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77950.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi deleted file mode 100644 index 57eb88177e92..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a77950.dtsi +++ /dev/null @@ -1,330 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the R-Car H3 (R8A77950) SoC - * - * Copyright (C) 2015 Renesas Electronics Corp. - */ - -#include "r8a77951.dtsi" - -#undef SOC_HAS_USB2_CH3 - -&audma0 { - iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, - <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, - <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, - <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, - <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, - <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, - <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, - <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; -}; - -&audma1 { - iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, - <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, - <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, - <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, - <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, - <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, - <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, - <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; -}; - -&cluster0_opp { - /delete-node/ opp-1600000000; - /delete-node/ opp-1700000000; -}; - -&du { - renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; -}; - -&fcpvb1 { - iommus = <&ipmmu_vp0 7>; -}; - -&fcpf1 { - iommus = <&ipmmu_vp0 1>; -}; - -&fcpvi1 { - iommus = <&ipmmu_vp0 9>; -}; - -&fcpvd2 { - iommus = <&ipmmu_vi0 10>; -}; - -&gpio1 { - gpio-ranges = <&pfc 0 32 28>; -}; - -&ipmmu_vi0 { - renesas,ipmmu-main = <&ipmmu_mm 11>; -}; - -&ipmmu_vp0 { - renesas,ipmmu-main = <&ipmmu_mm 12>; -}; - -&ipmmu_vc0 { - renesas,ipmmu-main = <&ipmmu_mm 9>; -}; - -&ipmmu_vc1 { - renesas,ipmmu-main = <&ipmmu_mm 10>; -}; - -&ipmmu_rt { - renesas,ipmmu-main = <&ipmmu_mm 7>; -}; - -&soc { - /delete-node/ dma-controller@e6460000; - /delete-node/ dma-controller@e6470000; - - ipmmu_mp1: iommu@ec680000 { - compatible = "renesas,ipmmu-r8a7795"; - reg = <0 0xec680000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 5>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - ipmmu_sy: iommu@e7730000 { - compatible = "renesas,ipmmu-r8a7795"; - reg = <0 0xe7730000 0 0x1000>; - renesas,ipmmu-main = <&ipmmu_mm 8>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - #iommu-cells = <1>; - }; - - /delete-node/ iommu@fd950000; - /delete-node/ iommu@fd960000; - /delete-node/ iommu@fd970000; - /delete-node/ iommu@febe0000; - /delete-node/ iommu@fe980000; - - xhci1: usb@ee040000 { - compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; - reg = <0 0xee040000 0 0xc00>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 327>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 327>; - status = "disabled"; - }; - - /delete-node/ usb@e659c000; - /delete-node/ usb@ee0e0000; - /delete-node/ usb@ee0e0100; - - /delete-node/ usb-phy@ee0e0200; - - fdp1@fe948000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe948000 0 0x2400>; - interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 117>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 117>; - renesas,fcp = <&fcpf2>; - }; - - fcpf2: fcp@fe952000 { - compatible = "renesas,fcpf"; - reg = <0 0xfe952000 0 0x200>; - clocks = <&cpg CPG_MOD 613>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 613>; - iommus = <&ipmmu_vp0 2>; - }; - - fcpvd3: fcp@fea3f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea3f000 0 0x200>; - clocks = <&cpg CPG_MOD 600>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 600>; - iommus = <&ipmmu_vi0 11>; - }; - - fcpvi2: fcp@fe9cf000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe9cf000 0 0x200>; - clocks = <&cpg CPG_MOD 609>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 609>; - iommus = <&ipmmu_vp0 10>; - }; - - vspd3: vsp@fea38000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x5000>; - interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 620>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 620>; - - renesas,fcp = <&fcpvd3>; - }; - - vspi2: vsp@fe9c0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9c0000 0 0x8000>; - interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 629>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 629>; - - renesas,fcp = <&fcpvi2>; - }; - - csi21: csi2@fea90000 { - compatible = "renesas,r8a7795-csi2"; - reg = <0 0xfea90000 0 0x10000>; - interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 713>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 713>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - csi21vin0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vin0csi21>; - }; - csi21vin1: endpoint@1 { - reg = <1>; - remote-endpoint = <&vin1csi21>; - }; - csi21vin2: endpoint@2 { - reg = <2>; - remote-endpoint = <&vin2csi21>; - }; - csi21vin3: endpoint@3 { - reg = <3>; - remote-endpoint = <&vin3csi21>; - }; - csi21vin4: endpoint@4 { - reg = <4>; - remote-endpoint = <&vin4csi21>; - }; - csi21vin5: endpoint@5 { - reg = <5>; - remote-endpoint = <&vin5csi21>; - }; - csi21vin6: endpoint@6 { - reg = <6>; - remote-endpoint = <&vin6csi21>; - }; - csi21vin7: endpoint@7 { - reg = <7>; - remote-endpoint = <&vin7csi21>; - }; - }; - }; - }; -}; - -&vin0 { - ports { - port@1 { - vin0csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin0>; - }; - }; - }; -}; - -&vin1 { - ports { - port@1 { - vin1csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin1>; - }; - }; - }; -}; - -&vin2 { - ports { - port@1 { - vin2csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin2>; - }; - }; - }; -}; - -&vin3 { - ports { - port@1 { - vin3csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin3>; - }; - }; - }; -}; - -&vin4 { - ports { - port@1 { - vin4csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin4>; - }; - }; - }; -}; - -&vin5 { - ports { - port@1 { - vin5csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin5>; - }; - }; - }; -}; - -&vin6 { - ports { - port@1 { - vin6csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin6>; - }; - }; - }; -}; - -&vin7 { - ports { - port@1 { - vin7csi21: endpoint@1 { - reg = <1>; - remote-endpoint = <&csi21vin7>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index f770d160e948..10b91e9733bf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -75,7 +75,6 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 09c61696f7fb..3ea8572e917f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -70,13 +70,11 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 59a18dfcb8cc..d52cb0b67d80 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -70,13 +70,11 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 9b4f7ad95ca8..9584115c6b17 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -75,13 +75,11 @@ opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <900000>; clock-latency-ns = <300000>; - turbo-mode; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 1d326552e2fa..68d1f1d53b3a 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -14,3 +14,11 @@ model = "Renesas Condor board based on r8a77980"; compatible = "renesas,condor", "renesas,r8a77980"; }; + +&i2c0 { + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index d168b0e7747d..77d22df25fff 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -122,6 +122,7 @@ phy0: ethernet-phy@0 { compatible = "ethernet-phy-id0022.1622", "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index d4718f144e33..4529e9b57c33 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -49,17 +49,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi index e06b8eda85e1..dbc8dcab109d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi @@ -5,6 +5,8 @@ * Copyright (C) 2021 Glider bv */ +#include <dt-bindings/media/video-interfaces.h> + &csi40 { status = "okay"; @@ -105,6 +107,7 @@ port@4 { reg = <4>; max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; remote-endpoint = <&csi40_in>; @@ -125,6 +128,7 @@ port@4 { reg = <4>; max96712_out1: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; lane-polarities = <0 0 0 0 1>; @@ -146,6 +150,7 @@ port@4 { reg = <4>; max96712_out2: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>; clock-lanes = <0>; data-lanes = <1 2 3 4>; lane-polarities = <0 0 0 0 1>; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index b2e67b82caf6..63db822e5f46 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -37,8 +37,12 @@ }; }; +&can_clk { + clock-frequency = <40000000>; +}; + &canfd { - pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>; + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; pinctrl-names = "default"; status = "okay"; @@ -80,6 +84,11 @@ }; + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + canfd0_pins: canfd0 { groups = "canfd0_data"; function = "canfd0"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi index 41fbb9998cf8..bf587a14ec19 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi @@ -606,7 +606,8 @@ }; canfd: can@e6660000 { - compatible = "renesas,r8a779a0-canfd"; + compatible = "renesas,r8a779a0-canfd", + "renesas,rcar-gen4-canfd"; reg = <0 0xe6660000 0 0x8000>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -2097,7 +2098,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee480000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2106,7 +2107,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee4c0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 19>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2115,7 +2116,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2124,7 +2125,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed40000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 1>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2133,7 +2134,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed80000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 3>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_A3IR>; #iommu-cells = <1>; }; @@ -2142,7 +2143,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeedc0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 12>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2151,7 +2152,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee80000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 14>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2160,7 +2161,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeeec0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 15>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2169,7 +2170,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeee00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 6>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2178,7 +2179,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 5>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2187,7 +2188,7 @@ compatible = "renesas,ipmmu-r8a779a0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeef40000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 11>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -2209,8 +2210,7 @@ interrupt-controller; reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; fcpvd0: fcp@fea10000 { @@ -2857,9 +2857,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi index f20b612b2b9a..1d5426e6293c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi @@ -1059,7 +1059,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee480000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 10>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1068,7 +1068,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xee4c0000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 19>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1077,7 +1077,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed00000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 0>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1086,7 +1086,7 @@ compatible = "renesas,ipmmu-r8a779f0", "renesas,rcar-gen4-ipmmu-vmsa"; reg = <0 0xeed40000 0 0x20000>; - renesas,ipmmu-main = <&ipmmu_mm 2>; + renesas,ipmmu-main = <&ipmmu_mm>; power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; #iommu-cells = <1>; }; @@ -1108,8 +1108,7 @@ interrupt-controller; reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; prr: chipid@fff00044 { @@ -1119,7 +1118,7 @@ }; thermal-zones { - sensor_thermal1: sensor1-thermal { + sensor_thermal_rtcore: sensor1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; @@ -1133,7 +1132,7 @@ }; }; - sensor_thermal2: sensor2-thermal { + sensor_thermal_apcore0: sensor2-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; @@ -1147,7 +1146,7 @@ }; }; - sensor_thermal3: sensor3-thermal { + sensor_thermal_apcore4: sensor3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; @@ -1164,10 +1163,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; ufs30_clk: ufs30-clk { diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso new file mode 100644 index 000000000000..e6f53377ecd9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the White Hawk board with ARD-AUDIO-DA7212 Board + * + * You can find and buy "ARD-AUDIO-DA7212" at Digi-Key + * + * https://www.digikey.jp/en/products/detail/ARD-AUDIO-DA7212/1564-1021-ND/5456357 + * + * Copyright (C) 2022 Renesas Electronics Corp. + * + * + * [Connection] + * + * White Hawk ARD-AUDIO-DA7212 + * +----------------------------+ + * |CPU board | + * | | + * |CN40 (IO PIN HEADER) | + * | AUDIO_CLKIN_V pin1 |<--\ +---------------+ + * |(*) GP1_25/SL_SW2_V pin2 |<--/ |J2 | + * | AUDIO_CLKOUT_V pin5 |<----->| pin7 MCLK | + * | SSI_SCK_V pin9 |<----->| pin1 BCLK | + * | SSI_WS_V pin13 |<----->| pin3 WCLK | + * | SSI_SD_V pin15 |<----->| pin5 DATIN | (@) + * | | \-->| pin15 DATOUT | [CAPTURE] + * +----------------------------+ +---------------+ + * +----------------------------+ + * |Breakout board | + * | | +---------------+ + * |CN34 (I2C CN) | |J1 | + * | I2C0_SCL pin3 |<----->| pin20 SCL | + * | I2C0_SDA pin5 |<----->| pin18 SDA | + * | | +---------------+ + * | | +-----------------------+ + * |CN4 (Power) | |J7 | + * | 3v3 (v) pin9 |<----->| pin4 / pin8 3.3v | + * | GND (v) pin3 / pin4 |<----->| pin12 / pin14 GND | + * +----------------------------+ +-----------------------+ + * (*) GP1_25/SL_SW2_V is used as TPU + * (@) Connect to pin5 (DATIN = playback) or pin15 (DATOUT = capture) + * (v) These are just sample pins. You can find many 3v3 / GND pins on + * White Hawk board, not only CN4. You can use other pins for it. + * + * [How to enable] + * + * You need these configs + * + * CONFIG_PWM + * CONFIG_PWM_RENESAS_TPU + * CONFIG_COMMON_CLK_PWM + * CONFIG_SND_SOC_DA7213 + * + * [How to use] + * + * 44.1kHz groups sound is available by default. + * You need to update audio_clkin settings to switch to 48kHz groups sound. + * see + * [(C) clock] + * + * You can use capture if you change the settings + * see + * [CAPTURE] + * + * You need to setup Headphone + * + * > amixer set "Headphone" 40% + * > amixer set "Headphone" on + * > amixer set "Mixout Left DAC Left" on + * > amixer set "Mixout Right DAC Right" on + */ + +/dts-v1/; +/plugin/; +#include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + +&{/} { + sound_card: sound { + compatible = "audio-graph-card"; + label = "rcar-sound"; + + dais = <&rsnd_port>; /* DA7212 Audio Codec */ + }; + + tpu_clk: tpu-clk { + compatible = "pwm-clock"; + #clock-cells = <0>; + + /* 44.1kHz groups [(C) clock] */ + clock-frequency = <11289600>; + pwms = <&tpu 0 88 0>; /* 1000000000 / 88 =~ 11289600 */ + + /* 48 kHz groups [(C) clock] */ +// clock-frequency = <12288000>; +// pwms = <&tpu 0 81 0>; /* 1000000000 / 81 =~ 12288000 */ + }; + +}; + +&pfc { + sound_pins: sound { + groups = "ssi_ctrl", "ssi_data"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clkin", "audio_clkout"; + function = "audio_clk"; + }; + + tpu0_pins: tpu0 { + groups = "tpu_to0_a"; + function = "tpu"; + }; +}; + +&tpu { + pinctrl-0 = <&tpu0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + codec@1a { + compatible = "dlg,da7212"; + + #sound-dai-cells = <0>; + reg = <0x1a>; + + clocks = <&rcar_sound>; + clock-names = "mclk"; + + dlg,micbias1-lvl = <2500>; + dlg,micbias2-lvl = <2500>; + dlg,dmic-data-sel = "lrise_rfall"; + dlg,dmic-samplephase = "between_clkedge"; + dlg,dmic-clkrate = <3000000>; + + VDDA-supply = <®_1p8v>; + VDDMIC-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + port { + da7212_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>, <&sound_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout */ + #clock-cells = <0>; + clock-frequency = <5644800>; /* 44.1kHz groups [(C) clock] */ +// clock-frequency = <6144000>; /* 48 kHz groups [(C) clock] */ + + status = "okay"; + + /* Update <clkin> to <tpu_clk> */ + clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&tpu_clk>; + + ports { + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&da7212_endpoint>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; + + /* Mutually exclusive with 'capture' */ + playback = <&ssi0>; + /* [CAPTURE] */ + /* capture = <&ssi0>; */ + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi index ae7522b60e5d..f8537f7ea4de 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi @@ -5,7 +5,63 @@ * Copyright (C) 2022 Glider bv */ +#include <dt-bindings/media/video-interfaces.h> + +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&max96712_out0>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi41_in: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&max96712_out1>; + }; + }; + }; +}; + &i2c0 { + pca9654_a: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9654_b: gpio@22 { + compatible = "onnn,pca9654"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + eeprom@52 { compatible = "rohm,br24g01", "atmel,24c01"; label = "csi-dsi-sub-board-id"; @@ -13,3 +69,119 @@ pagesize = <8>; }; }; + +&i2c1 { + gmsl0: gmsl-deserializer@49 { + compatible = "maxim,max96712"; + reg = <0x49>; + enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out0: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + }; + + gmsl1: gmsl-deserializer@4b { + compatible = "maxim,max96712"; + reg = <0x4b>; + enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + max96712_out1: endpoint { + bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>; + clock-lanes = <0>; + data-lanes = <1 2 3>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + }; +}; + +&isp0 { + status = "okay"; +}; + +&isp1 { + status = "okay"; +}; + +&vin00 { + status = "okay"; +}; + +&vin01 { + status = "okay"; +}; + +&vin02 { + status = "okay"; +}; + +&vin03 { + status = "okay"; +}; + +&vin04 { + status = "okay"; +}; + +&vin05 { + status = "okay"; +}; + +&vin06 { + status = "okay"; +}; + +&vin07 { + status = "okay"; +}; + +&vin08 { + status = "okay"; +}; + +&vin09 { + status = "okay"; +}; + +&vin10 { + status = "okay"; +}; + +&vin11 { + status = "okay"; +}; + +&vin12 { + status = "okay"; +}; + +&vin13 { + status = "okay"; +}; + +&vin14 { + status = "okay"; +}; + +&vin15 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts index 04a2b6b83e74..eff1ef6e2cc8 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts @@ -13,6 +13,33 @@ / { model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0"; compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0"; + + can_transceiver0: can-phy0 { + compatible = "nxp,tjr1443"; + #phy-cells = <0>; + enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + max-bitrate = <5000000>; + }; +}; + +&can_clk { + clock-frequency = <40000000>; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + channel0 { + status = "okay"; + phys = <&can_transceiver0>; + }; + + channel1 { + status = "okay"; + }; }; &i2c0 { @@ -23,3 +50,20 @@ pagesize = <8>; }; }; + +&pfc { + can_clk_pins: can-clk { + groups = "can_clk"; + function = "can_clk"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 7a87a5dc1b6a..d3d25e077c5d 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -14,6 +14,20 @@ #address-cells = <2>; #size-cells = <2>; + /* External Audio clock - to be overridden by boards that provide it */ + audio_clkin: audio_clkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cluster0_opp: opp-table-0 { compatible = "operating-points-v2"; opp-shared; @@ -431,6 +445,18 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a779g0-thermal"; + reg = <0 0xe6198000 0 0x200>, + <0 0xe61a0000 0 0x200>, + <0 0xe61a8000 0 0x200>, + <0 0xe61b0000 0 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc"; #interrupt-cells = <2>; @@ -682,6 +708,56 @@ status = "disabled"; }; + canfd: can@e6660000 { + compatible = "renesas,r8a779g0-canfd", + "renesas,rcar-gen4-canfd"; + reg = <0 0xe6660000 0 0x8500>; + interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; + clocks = <&cpg CPG_MOD 328>, + <&cpg CPG_CORE R8A779G0_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A779G0_CLK_CANFD>; + assigned-clock-rates = <80000000>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + + channel2 { + status = "disabled"; + }; + + channel3 { + status = "disabled"; + }; + + channel4 { + status = "disabled"; + }; + + channel5 { + status = "disabled"; + }; + + channel6 { + status = "disabled"; + }; + + channel7 { + status = "disabled"; + }; + }; + avb0: ethernet@e6800000 { compatible = "renesas,etheravb-r8a779g0", "renesas,etheravb-rcar-gen4"; @@ -1098,6 +1174,454 @@ status = "disabled"; }; + vin00: video@e6ef0000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 730>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 730>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin00isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin00>; + }; + }; + }; + }; + + vin01: video@e6ef1000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 731>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 731>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin01isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin01>; + }; + }; + }; + }; + + vin02: video@e6ef2000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 800>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 800>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin02isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin02>; + }; + }; + }; + }; + + vin03: video@e6ef3000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 801>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 801>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin03isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin03>; + }; + }; + }; + }; + + vin04: video@e6ef4000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 802>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 802>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin04isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin04>; + }; + }; + }; + }; + + vin05: video@e6ef5000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 803>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 803>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin05isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin05>; + }; + }; + }; + }; + + vin06: video@e6ef6000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin06isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin06>; + }; + }; + }; + }; + + vin07: video@e6ef7000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin07isp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&isp0vin07>; + }; + }; + }; + }; + + vin08: video@e6ef8000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef8000 0 0x1000>; + interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <8>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin08isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin08>; + }; + }; + }; + }; + + vin09: video@e6ef9000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6ef9000 0 0x1000>; + interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <9>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin09isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin09>; + }; + }; + }; + }; + + vin10: video@e6efa000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efa000 0 0x1000>; + interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <10>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin10isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin10>; + }; + }; + }; + }; + + vin11: video@e6efb000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efb000 0 0x1000>; + interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <11>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin11isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin11>; + }; + }; + }; + }; + + vin12: video@e6efc000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efc000 0 0x1000>; + interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <12>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin12isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin12>; + }; + }; + }; + }; + + vin13: video@e6efd000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efd000 0 0x1000>; + interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <13>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin13isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin13>; + }; + }; + }; + }; + + vin14: video@e6efe000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6efe000 0 0x1000>; + interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 812>; + renesas,id = <14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin14isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin14>; + }; + }; + }; + }; + + vin15: video@e6eff000 { + compatible = "renesas,vin-r8a779g0"; + reg = <0 0xe6eff000 0 0x1000>; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 813>; + renesas,id = <15>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <2>; + + vin15isp1: endpoint@1 { + reg = <1>; + remote-endpoint = <&isp1vin15>; + }; + }; + }; + }; + dmac0: dma-controller@e7350000 { compatible = "renesas,dmac-r8a779g0", "renesas,rcar-gen4-dmac"; @@ -1131,6 +1655,14 @@ resets = <&cpg 709>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7351000 { @@ -1166,6 +1698,192 @@ resets = <&cpg 710>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>, + <&ipmmu_ds0 18>, <&ipmmu_ds0 19>, + <&ipmmu_ds0 20>, <&ipmmu_ds0 21>, + <&ipmmu_ds0 22>, <&ipmmu_ds0 23>, + <&ipmmu_ds0 24>, <&ipmmu_ds0 25>, + <&ipmmu_ds0 26>, <&ipmmu_ds0 27>, + <&ipmmu_ds0 28>, <&ipmmu_ds0 29>, + <&ipmmu_ds0 30>, <&ipmmu_ds0 31>; + }; + + rcar_sound: sound@ec5a0000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * audio_clkout0/1/2/3 : #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a779g0", "renesas,rcar_sound-gen4"; + reg = <0 0xec5a0000 0 0x020>, + <0 0xec540000 0 0x1000>, + <0 0xec541000 0 0x050>, + <0 0xec400000 0 0x40000>; + reg-names = "adg", "ssiu", "ssi", "sdmc"; + + clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>; + clock-names = "ssiu.0", "ssi.0", "clkin"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 2926>, <&cpg 2927>; + reset-names = "ssiu.0", "ssi.0"; + status = "disabled"; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&dmac0 0x6e>, <&dmac0 0x6f>; + dma-names = "tx", "rx"; + }; + ssiu01: ssiu-1 { + dmas = <&dmac0 0x6c>, <&dmac0 0x6d>; + dma-names = "tx", "rx"; + }; + ssiu02: ssiu-2 { + dmas = <&dmac0 0x6a>, <&dmac0 0x6b>; + dma-names = "tx", "rx"; + }; + ssiu03: ssiu-3 { + dmas = <&dmac0 0x68>, <&dmac0 0x69>; + dma-names = "tx", "rx"; + }; + ssiu04: ssiu-4 { + dmas = <&dmac0 0x66>, <&dmac0 0x67>; + dma-names = "tx", "rx"; + }; + ssiu05: ssiu-5 { + dmas = <&dmac0 0x64>, <&dmac0 0x65>; + dma-names = "tx", "rx"; + }; + ssiu06: ssiu-6 { + dmas = <&dmac0 0x62>, <&dmac0 0x63>; + dma-names = "tx", "rx"; + }; + ssiu07: ssiu-7 { + dmas = <&dmac0 0x60>, <&dmac0 0x61>; + dma-names = "tx", "rx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + + ipmmu_rt0: iommu@ee480000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee480000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt1: iommu@ee4c0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xee4c0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds0: iommu@eed00000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@eed40000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: iommu@eed80000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeed80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_vc: iommu@eedc0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeedc0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_3dg: iommu@eee00000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeee00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@eee80000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeee80000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: iommu@eeec0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeeec0000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip0: iommu@eef00000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeef00000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vip1: iommu@eef40000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeef40000 0 0x20000>; + renesas,ipmmu-main = <&ipmmu_mm>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@eefc0000 { + compatible = "renesas,ipmmu-r8a779g0", + "renesas,rcar-gen4-ipmmu-vmsa"; + reg = <0 0xeefc0000 0 0x20000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + #iommu-cells = <1>; }; mmc0: mmc@ee140000 { @@ -1179,6 +1897,7 @@ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; resets = <&cpg 706>; max-frequency = <200000000>; + iommus = <&ipmmu_ds0 32>; status = "disabled"; }; @@ -1205,8 +1924,59 @@ interrupt-controller; reg = <0x0 0xf1000000 0 0x20000>, <0x0 0xf1060000 0 0x110000>; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + csi40: csi2@fe500000 { + compatible = "renesas,r8a779g0-csi2"; + reg = <0 0xfe500000 0 0x40000>; + interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 331>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi40isp0: endpoint { + remote-endpoint = <&isp0csi40>; + }; + }; + }; + }; + + csi41: csi2@fe540000 { + compatible = "renesas,r8a779g0-csi2"; + reg = <0 0xfe540000 0 0x40000>; + interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 400>; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 400>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + csi41isp1: endpoint { + remote-endpoint = <&isp1csi41>; + }; + }; + }; }; fcpvd0: fcp@fea10000 { @@ -1281,6 +2051,172 @@ }; }; + isp0: isp@fed00000 { + compatible = "renesas,r8a779g0-isp"; + reg = <0 0xfed00000 0 0x10000>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cpg CPG_MOD 612>; + power-domains = <&sysc R8A779G0_PD_A3ISP0>; + resets = <&cpg 612>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp0csi40: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi40isp0>; + }; + }; + + port@1 { + reg = <1>; + isp0vin00: endpoint { + remote-endpoint = <&vin00isp0>; + }; + }; + + port@2 { + reg = <2>; + isp0vin01: endpoint { + remote-endpoint = <&vin01isp0>; + }; + }; + + port@3 { + reg = <3>; + isp0vin02: endpoint { + remote-endpoint = <&vin02isp0>; + }; + }; + + port@4 { + reg = <4>; + isp0vin03: endpoint { + remote-endpoint = <&vin03isp0>; + }; + }; + + port@5 { + reg = <5>; + isp0vin04: endpoint { + remote-endpoint = <&vin04isp0>; + }; + }; + + port@6 { + reg = <6>; + isp0vin05: endpoint { + remote-endpoint = <&vin05isp0>; + }; + }; + + port@7 { + reg = <7>; + isp0vin06: endpoint { + remote-endpoint = <&vin06isp0>; + }; + }; + + port@8 { + reg = <8>; + isp0vin07: endpoint { + remote-endpoint = <&vin07isp0>; + }; + }; + }; + }; + + isp1: isp@fed20000 { + compatible = "renesas,r8a779g0-isp"; + reg = <0 0xfed20000 0 0x10000>; + interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A779G0_PD_A3ISP1>; + resets = <&cpg 613>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + + isp1csi41: endpoint@1 { + reg = <1>; + remote-endpoint = <&csi41isp1>; + }; + }; + + port@1 { + reg = <1>; + isp1vin08: endpoint { + remote-endpoint = <&vin08isp1>; + }; + }; + + port@2 { + reg = <2>; + isp1vin09: endpoint { + remote-endpoint = <&vin09isp1>; + }; + }; + + port@3 { + reg = <3>; + isp1vin10: endpoint { + remote-endpoint = <&vin10isp1>; + }; + }; + + port@4 { + reg = <4>; + isp1vin11: endpoint { + remote-endpoint = <&vin11isp1>; + }; + }; + + port@5 { + reg = <5>; + isp1vin12: endpoint { + remote-endpoint = <&vin12isp1>; + }; + }; + + port@6 { + reg = <6>; + isp1vin13: endpoint { + remote-endpoint = <&vin13isp1>; + }; + }; + + port@7 { + reg = <7>; + isp1vin14: endpoint { + remote-endpoint = <&vin14isp1>; + }; + }; + + port@8 { + reg = <8>; + isp1vin15: endpoint { + remote-endpoint = <&vin15isp1>; + }; + }; + }; + }; + dsi0: dsi-encoder@fed80000 { compatible = "renesas,r8a779g0-dsi-csi2-tx"; reg = <0 0xfed80000 0 0x10000>; @@ -1345,11 +2281,69 @@ }; }; + thermal-zones { + sensor_thermal_cr52: sensor1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal_cnn: sensor2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal_ca76: sensor3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + + trips { + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal_ddr1: sensor4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 3>; + + trips { + sensor4_crit: sensor4-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi index b6e855f52adf..1064a87a0c77 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi @@ -12,6 +12,9 @@ }; &cluster0_opp { + opp-1700000000 { + /delete-property/ turbo-mode; + }; opp-2000000000 { opp-hz = /bits/ 64 <2000000000>; opp-microvolt = <960000>; diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi index 6cff38a6d20b..7fdbdd97ed4b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi @@ -12,6 +12,9 @@ }; &cluster0_opp { + opp-1800000000 { + /delete-property/ turbo-mode; + }; opp-2000000000 { opp-hz = /bits/ 64 <2000000000>; opp-microvolt = <960000>; diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi index 8c9c0557fe77..df51e0ff5986 100644 --- a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi @@ -12,6 +12,9 @@ }; &cluster0_opp { + opp-1800000000 { + /delete-property/ turbo-mode; + }; opp-2000000000 { opp-hz = /bits/ 64 <2000000000>; opp-microvolt = <960000>; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso new file mode 100644 index 000000000000..4edd103c7711 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/{G2UL, Five} SMARC EVK PMOD parts + * + * Copyright (C) 2023 Renesas Electronics Corp. + * + * + * [Connection] + * + * SMARC EVK + * +----------------------------+ + * |CN7 (PMOD1 PIN HEADER) | + * | SCI0_TXD pin7 | + * | SCI0_RXD pin8 | + * | Gnd pin11 | + * | Vcc pin12 | + * +----------------------------+ + * + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +&pinctrl { + can0-stb-hog { + status = "disabled"; + }; + + can1-stb-hog { + status = "disabled"; + }; + + sci0_pins: sci0-pins { + pinmux = <RZG2L_PORT_PINMUX(2, 2, 5)>, /* TxD */ + <RZG2L_PORT_PINMUX(2, 3, 5)>; /* RxD */ + }; +}; + +&sci0 { + pinctrl-0 = <&sci0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi index c8a83e42c4f3..27c35a657b15 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi @@ -80,9 +80,8 @@ reg = <0 0x10049c00 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(329) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -101,9 +100,8 @@ reg = <0 0x1004a000 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(333) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -121,10 +119,8 @@ "renesas,rz-ssi"; reg = <0 0x1004a400 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>, - <SOC_PERIPHERAL_IRQ(335) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(336) IRQ_TYPE_EDGE_RISING>, <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + interrupt-names = "int_req", "dma_rt"; clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -143,9 +139,8 @@ reg = <0 0x1004a800 0 0x400>; interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>, <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>, - <SOC_PERIPHERAL_IRQ(341) IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>, <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -569,9 +564,11 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>, <&cpg CPG_MOD R9A07G043_DMAC_PCLK>; + clock-names = "main", "register"; power-domains = <&cpg>; resets = <&cpg R9A07G043_DMAC_ARESETN>, <&cpg R9A07G043_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; #dma-cells = <1>; dma-channels = <16>; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi index 9d854706ada5..2ab231572d95 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi @@ -35,6 +35,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -42,10 +47,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 487536696d90..1315be5167b9 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -157,6 +157,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -175,9 +180,8 @@ reg = <0 0x10049c00 0 0x400>; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -196,9 +200,8 @@ reg = <0 0x1004a000 0 0x400>; interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -216,10 +219,8 @@ "renesas,rz-ssi"; reg = <0 0x1004a400 0 0x400>; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + interrupt-names = "int_req", "dma_rt"; clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -238,9 +239,8 @@ reg = <0 0x1004a800 0 0x400>; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>, <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -618,6 +618,85 @@ status = "disabled"; }; + cru: video@10830000 { + compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru"; + reg = <0 0x10830000 0 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>, + <&cpg CPG_MOD R9A07G044_CRU_ACLK>; + clock-names = "video", "apb", "axi"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "image_conv", "image_conv_err", "axi_mst_err"; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_ARESETN>; + reset-names = "presetn", "aresetn"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0>; + cruparallel: endpoint@0 { + reg = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + crucsi2: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi2cru>; + }; + }; + }; + }; + + csi2: csi2@10830400 { + compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2"; + reg = <0 0x10830400 0 0xfc00>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>, + <&cpg CPG_MOD R9A07G044_CRU_VCLK>, + <&cpg CPG_MOD R9A07G044_CRU_PCLK>; + clock-names = "system", "video", "apb"; + resets = <&cpg R9A07G044_CRU_PRESETN>, + <&cpg R9A07G044_CRU_CMN_RSTB>; + reset-names = "presetn", "cmn-rstb"; + power-domains = <&cpg>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + csi2cru: endpoint@0 { + reg = <0>; + remote-endpoint = <&crucsi2>; + }; + }; + }; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; @@ -740,9 +819,11 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>, <&cpg CPG_MOD R9A07G044_DMAC_PCLK>; + clock-names = "main", "register"; power-domains = <&cpg>; resets = <&cpg R9A07G044_DMAC_ARESETN>, <&cpg R9A07G044_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; #dma-cells = <1>; dma-channels = <16>; }; @@ -1061,9 +1142,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi index 1d57df706939..56a979e82c4f 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi @@ -15,13 +15,6 @@ /delete-node/ cpu-map; /delete-node/ cpu@100; }; - - timer { - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; }; &soc { diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi index 9d89d4590358..9cf27ca9f1d2 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi @@ -15,11 +15,4 @@ /delete-node/ cpu-map; /delete-node/ cpu@100; }; - - timer { - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso new file mode 100644 index 000000000000..d834bff9bda2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree overlay for the RZ/G2L SMARC EVK with OV5645 camera + * connected to CSI and CRU enabled. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +#define OV5645_PARENT_I2C i2c0 +#include "rz-smarc-cru-csi-ov5645.dtsi" + +&ov5645 { + enable-gpios = <&pinctrl RZG2L_GPIO(2, 0) GPIO_ACTIVE_HIGH>; + reset-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi index 304ade54425b..cc11e5855d62 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi @@ -157,6 +157,11 @@ }; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -175,9 +180,8 @@ reg = <0 0x10049c00 0 0x400>; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -196,9 +200,8 @@ reg = <0 0x1004a000 0 0x400>; interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -216,10 +219,8 @@ "renesas,rz-ssi"; reg = <0 0x1004a400 0 0x400>; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + interrupt-names = "int_req", "dma_rt"; clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -238,9 +239,8 @@ reg = <0 0x1004a800 0 0x400>; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt"; + <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "int_req", "dma_rx", "dma_tx"; clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>, <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>, <&audio_clk1>, <&audio_clk2>; @@ -746,9 +746,11 @@ "ch12", "ch13", "ch14", "ch15"; clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>, <&cpg CPG_MOD R9A07G054_DMAC_PCLK>; + clock-names = "main", "register"; power-domains = <&cpg>; resets = <&cpg R9A07G054_DMAC_ARESETN>, <&cpg R9A07G054_DMAC_RST_ASYNC>; + reset-names = "arst", "rst_async"; #dma-cells = <1>; dma-channels = <16>; }; @@ -1067,9 +1069,9 @@ timer { compatible = "arm,armv8-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi index c448cc6634c1..d85a6ac0f024 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi @@ -15,11 +15,4 @@ /delete-node/ cpu-map; /delete-node/ cpu@100; }; - - timer { - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts index d6737395df67..39fe3f94991e 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts +++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "r9a09g011.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzv2m-pinctrl.h> / { @@ -22,6 +23,31 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hs_ep: endpoint { + remote-endpoint = <&usb3_hs_ep>; + }; + }; + + port@1 { + reg = <1>; + ss_ep: endpoint { + remote-endpoint = <&hd3ss3220_in_ep>; + }; + }; + }; + }; + memory@58000000 { device_type = "memory"; /* @@ -35,6 +61,36 @@ device_type = "memory"; reg = <0x1 0x80000000 0x0 0x80000000>; }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&pwc 0 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 0>, <1800000 1>; + }; }; &avb { @@ -50,6 +106,23 @@ }; }; +&emmc { + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; + bus-width = <8>; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + fixed-emmc-driver-type = <1>; + max-frequency = <200000000>; + status = "okay"; +}; + &extal_clk { clock-frequency = <48000000>; }; @@ -59,6 +132,30 @@ pinctrl-names = "default"; clock-frequency = <400000>; status = "okay"; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hd3ss3220_in_ep: endpoint { + remote-endpoint = <&ss_ep>; + }; + }; + + port@1 { + reg = <1>; + hd3ss3220_out_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; }; &i2c2 { @@ -69,6 +166,26 @@ }; &pinctrl { + emmc_pins: emmc { + data { + pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */ + <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */ + <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */ + <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */ + <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */ + <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */ + <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */ + <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */ + power-source = <1800>; + }; + + ctrl { + pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */ + <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */ + power-source = <1800>; + }; + }; + i2c0_pins: i2c0 { pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */ <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */ @@ -78,6 +195,55 @@ pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */ <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */ }; + + sdhi0_pins: sd0 { + data { + pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */ + <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */ + <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */ + <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */ + power-source = <3300>; + }; + + ctrl { + pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */ + <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */ + power-source = <3300>; + }; + + cd { + pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */ + power-source = <3300>; + }; + }; + + sdhi0_pins_uhs: sd0-uhs { + data { + pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */ + <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */ + <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */ + <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */ + power-source = <1800>; + }; + + ctrl { + pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */ + <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */ + power-source = <1800>; + }; + + cd { + pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */ + power-source = <1800>; + }; + }; + + uart0_pins: uart0 { + pinmux = <RZV2M_PORT_PINMUX(3, 0, 2)>, /* UATX0 */ + <RZV2M_PORT_PINMUX(3, 1, 2)>, /* UARX0 */ + <RZV2M_PORT_PINMUX(3, 2, 2)>, /* UACTS0N */ + <RZV2M_PORT_PINMUX(3, 3, 2)>; /* UARTS0N */ + }; }; &pwc { @@ -85,10 +251,60 @@ status = "okay"; }; +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3v3>; + vqmmc-supply = <&vccq_sdhi0>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + &uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; status = "okay"; }; +&usb3drd { + status = "okay"; +}; + +&usb3host { + status = "okay"; +}; + +&usb3peri { + companion = <&usb3host>; + status = "okay"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb3_hs_ep: endpoint { + remote-endpoint = <&hs_ep>; + }; + }; + + port@1 { + reg = <1>; + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_out_ep>; + }; + }; + }; +}; + &wdt0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index b5d6f7701ef1..46d67b200a66 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -117,6 +117,51 @@ status = "disabled"; }; + usb3drd: usb3drd@85070400 { + compatible = "renesas,r9a09g011-usb3drd", + "renesas,rzv2m-usb3drd"; + reg = <0x0 0x85070400 0x0 0x100>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "drd", "bc", "gpi"; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + resets = <&cpg R9A09G011_USB_DRD_RESET>; + power-domains = <&cpg>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + usb3host: usb@85060000 { + compatible = "renesas,r9a09g011-xhci", + "renesas,rzv2m-xhci"; + reg = <0 0x85060000 0 0x2000>; + interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + resets = <&cpg R9A09G011_USB_ARESETN_H>; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb3peri: usb3peri@85070000 { + compatible = "renesas,r9a09g011-usb3-peri", + "renesas,rzv2m-usb3-peri"; + reg = <0x0 0x85070000 0x0 0x400>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>, + <&cpg CPG_MOD R9A09G011_USB_PCLK>; + clock-names = "axi", "reg"; + resets = <&cpg R9A09G011_USB_ARESETN_P>; + power-domains = <&cpg>; + status = "disabled"; + }; + }; + avb: ethernet@a3300000 { compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; reg = <0 0xa3300000 0 0x800>; diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi new file mode 100644 index 000000000000..c5bb63c63b47 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common Device Tree for the RZ/G2L SMARC EVK (and alike EVKs) with + * OV5645 camera connected to CSI and CRU enabled. + * + * Copyright (C) 2023 Renesas Electronics Corp. + */ + +&{/} { + ov5645_vdddo_1v8: 1p8v { + compatible = "regulator-fixed"; + regulator-name = "camera_vdddo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ov5645_vdda_2v8: 2p8v { + compatible = "regulator-fixed"; + regulator-name = "camera_vdda"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ov5645_vddd_1v5: 1p5v { + compatible = "regulator-fixed"; + regulator-name = "camera_vddd"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + ov5645_fixed_clk: osc25250-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&cru { + status = "okay"; +}; + +&csi2 { + status = "okay"; + + ports { + port@0 { + csi2_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&ov5645_ep>; + }; + }; + }; +}; + +&OV5645_PARENT_I2C { + #address-cells = <1>; + #size-cells = <0>; + + ov5645: camera@3c { + compatible = "ovti,ov5645"; + reg = <0x3c>; + clocks = <&ov5645_fixed_clk>; + clock-frequency = <24000000>; + vdddo-supply = <&ov5645_vdddo_1v8>; + vdda-supply = <&ov5645_vdda_2v8>; + vddd-supply = <&ov5645_vddd_1v5>; + + port { + ov5645_ep: endpoint { + clock-lanes = <0>; + data-lanes = <1 2>; + remote-endpoint = <&csi2_in>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index d693e879b330..0be2716659e9 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -267,6 +267,12 @@ }; }; }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; }; &ohci1 { diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 99a44c400d6a..2d585bbb8f3a 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -14,8 +14,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb @@ -84,10 +86,13 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 4f6959eb564d..8332c8aaf49b 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -474,7 +474,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + lvds_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -489,6 +489,10 @@ remote-endpoint = <&vopl_out_lvds>; }; }; + + lvds_out: port@1 { + reg = <1>; + }; }; }; }; @@ -1134,7 +1138,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + dsi_in: port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; @@ -1149,6 +1153,10 @@ remote-endpoint = <&vopl_out_dsi>; }; }; + + dsi_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts index 842efbaf1a6a..35bbaf559ca3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts @@ -142,7 +142,10 @@ }; &internal_display { - status = "disabled"; + compatible = "elida,kd50t048a", "sitronix,st7701"; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + IOVCC-supply = <&vcc_lcd>; + VCC-supply = <&vcc_lcd>; }; &rk817_charger { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts new file mode 100644 index 000000000000..a07a26b944a0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyarm.com) + * + * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3328-nanopi-r2s.dts" + +/ { + model = "FriendlyElec NanoPi R2C"; + compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328"; +}; + +&gmac2io { + phy-handle = <&yt8521s>; + tx_delay = <0x22>; + rx_delay = <0x12>; + + mdio { + /delete-node/ ethernet-phy@1; + + yt8521s: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts new file mode 100644 index 000000000000..5d7d567283e5 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Xunlong Software. Co., Ltd. + * (http://www.orangepi.org) + * + * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3328-orangepi-r1-plus.dts" + +/ { + model = "Xunlong Orange Pi R1 Plus LTS"; + compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328"; +}; + +&gmac2io { + phy-handle = <&yt8531c>; + tx_delay = <0x19>; + rx_delay = <0x05>; + + mdio { + /delete-node/ ethernet-phy@1; + + yt8531c: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + + pinctrl-0 = <ð_phy_reset_pin>; + pinctrl-names = "default"; + reset-assert-us = <15000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index ddd45de97950..054c6a4d1a45 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -665,7 +665,7 @@ i2c-scl-rising-time-ns = <168>; status = "okay"; - es8316: es8316@11 { + es8316: audio-codec@11 { compatible = "everest,es8316"; reg = <0x11>; clocks = <&cru SCLK_I2S_8CH_OUT>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index a0795a2b1cb1..61f3fec5a8b1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/linux-event-codes.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -29,6 +30,31 @@ stdout-path = "serial2:115200n8"; }; + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1600000>; + poll-interval = <100>; + + button-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + press-threshold-microvolt = <100000>; + }; + + button-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + press-threshold-microvolt = <600000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000 0>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -102,6 +128,30 @@ /* WL_REG_ON on module */ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + + /* MIPI DSI panel 1.8v supply */ + vcc1v8_lcd: vcc1v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; + + /* MIPI DSI panel 2.8v supply */ + vcc2v8_lcd: vcc2v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc2v8_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + }; }; &cpu_alert0 { @@ -139,6 +189,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -333,6 +388,25 @@ }; }; +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt1158"; + reg = <0x14>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &cluster0_opp { opp04 { status = "disabled"; @@ -362,6 +436,39 @@ status = "okay"; }; +&mipi_dsi { + status = "okay"; + clock-master; + + ports { + mipi_out: port@1 { + #address-cells = <0>; + #size-cells = <0>; + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "hannstar,hsd060bhw4"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; + iovcc-supply = <&vcc1v8_lcd>; + pinctrl-names = "default"; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -429,6 +536,15 @@ status = "okay"; }; +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-sd-highspeed; @@ -479,3 +595,27 @@ &uart2 { status = "okay"; }; + +&vopb { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>, + <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>, + <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 40e7c4a70055..928948e7c7bb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1954,7 +1954,7 @@ }; }; - mipi_dsi: mipi@ff960000 { + mipi_dsi: dsi@ff960000 { compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x8000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; @@ -1982,15 +1982,20 @@ reg = <0>; remote-endpoint = <&vopb_out_mipi>; }; + mipi_in_vopl: endpoint@1 { reg = <1>; remote-endpoint = <&vopl_out_mipi>; }; }; + + mipi_out: port@1 { + reg = <1>; + }; }; }; - mipi_dsi1: mipi@ff968000 { + mipi_dsi1: dsi@ff968000 { compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff968000 0x0 0x8000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2025,10 +2030,14 @@ remote-endpoint = <&vopl_out_mipi1>; }; }; + + mipi1_out: port@1 { + reg = <1>; + }; }; }; - edp: edp@ff970000 { + edp: dp@ff970000 { compatible = "rockchip,rk3399-edp"; reg = <0x0 0xff970000 0x0 0x8000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2045,6 +2054,7 @@ ports { #address-cells = <1>; #size-cells = <0>; + edp_in: port@0 { reg = <0>; #address-cells = <1>; @@ -2060,6 +2070,10 @@ remote-endpoint = <&vopl_out_edp>; }; }; + + edp_out: port@1 { + reg = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi index 9a0e217f069f..2a2821f4c580 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi @@ -22,6 +22,48 @@ <200000000>, <241500000>; }; +&dsi_dphy0 { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + dsi0_in: port@0 { + reg = <0>; + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel: panel@0 { + compatible = "anbernic,rg353p-panel", "newvision,nv3051d"; + reg = <0>; + backlight = <&backlight>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + &gpio_keys_control { button-a { gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; @@ -57,6 +99,22 @@ }; }; +&pinctrl { + gpio-lcd { + lcd_rst: lcd-rst { + rockchip,pins = + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + &pwm4 { status = "okay"; }; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts index 2671f207cfd1..410cd3e5e7bc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts @@ -495,7 +495,7 @@ }; &usb2phy0_otg { - vbus-supply = <&vcc5v0_usb2_otg>; + phy-supply = <&vcc5v0_usb2_otg>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts index d89d5263cb5e..5e4236af4fcb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts @@ -254,6 +254,14 @@ status = "okay"; }; +&usb2phy0_otg { + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + &vop { assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts new file mode 100644 index 000000000000..f70ca9f0470a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3568-nanopi-r5s.dtsi" + +/ { + model = "FriendlyElec NanoPi R5C"; + compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568"; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&reset_button_pin>; + + button-reset { + debounce-interval = <50>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + label = "reset"; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>; + + led-lan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; + }; + + power_led: led-power { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "heartbeat"; + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; + }; + + led-wlan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie20_reset_pin>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gpio-leds { + lan_led_pin: lan-led-pin { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + power_led_pin: power-led-pin { + rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_led_pin: wlan-led-pin { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie20_reset_pin: pcie20-reset-pin { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rockchip-key { + reset_button_pin: reset-button-pin { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts new file mode 100644 index 000000000000..2a1118f15c29 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include "rk3568-nanopi-r5s.dtsi" + +/ { + model = "FriendlyElec NanoPi R5S"; + compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>; + + led-lan1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; + }; + + led-lan2 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>; + }; + + power_led: led-power { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_POWER; + linux,default-trigger = "heartbeat"; + gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + }; + + led-wan { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WAN; + gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 15ms, 50ms for rtl8211f */ + snps,reset-delays-us = <0 15000 50000>; + tx_delay = <0x3c>; + rx_delay = <0x2f>; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-0 = <ð_phy0_reset_pin>; + pinctrl-names = "default"; + }; +}; + +&pcie2x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pcie3x1 { + num-lanes = <1>; + reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie3x2 { + num-lanes = <1>; + num-ib-windows = <8>; + num-ob-windows = <8>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + gmac0 { + eth_phy0_reset_pin: eth-phy0-reset-pin { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-leds { + lan1_led_pin: lan1-led-pin { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + lan2_led_pin: lan2-led-pin { + rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + power_led_pin: power-led-pin { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wan_led_pin: wan-led-pin { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi new file mode 100644 index 000000000000..58ba328ea782 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd. + * (http://www.friendlyelec.com) + * + * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vdd_usbc: vdd-usbc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_usbc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_usbc>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_usbc>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <200000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_usbc>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&combphy0 { + status = "okay"; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + }; +}; + +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&pcie30phy { + data-lanes = <1 2>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0-usb-host-en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en: vcc5v0-usb-otg-en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; + status = "okay"; +}; + +&sdmmc0 { + max-frequency = <150000000>; + no-sdio; + no-mmc; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1_otg { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index eed0059a68b8..f62e0fd881a9 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -744,8 +744,8 @@ compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x00 0xfe060000 0x00 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "hclk"; - clocks = <&cru PCLK_DSITX_0>, <&cru HCLK_VO>; + clock-names = "pclk"; + clocks = <&cru PCLK_DSITX_0>; phy-names = "dphy"; phys = <&dsi_dphy0>; power-domains = <&power RK3568_PD_VO>; @@ -772,8 +772,8 @@ compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xfe070000 0x0 0x10000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "hclk"; - clocks = <&cru PCLK_DSITX_1>, <&cru HCLK_VO>; + clock-names = "pclk"; + clocks = <&cru PCLK_DSITX_1>; phy-names = "dphy"; phys = <&dsi_dphy1>; power-domains = <&power RK3568_PD_VO>; @@ -1808,6 +1808,7 @@ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>; gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1819,6 +1820,7 @@ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>; gpio-controller; + gpio-ranges = <&pinctrl 0 32 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1830,6 +1832,7 @@ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>; gpio-controller; + gpio-ranges = <&pinctrl 0 64 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1841,6 +1844,7 @@ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>; gpio-controller; + gpio-ranges = <&pinctrl 0 96 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1852,6 +1856,7 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>; gpio-controller; + gpio-ranges = <&pinctrl 0 128 32>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 95805cb0adfa..3e4aee8f70c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -2,6 +2,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "rk3588.dtsi" / { @@ -17,6 +18,31 @@ stdout-path = "serial2:1500000n8"; }; + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 95 145 195 255>; + fan-supply = <&vcc5v0_sys>; + pwms = <&pwm1 0 50000 0>; + #cooling-cells = <2>; + }; + + sound { + compatible = "audio-graph-card"; + label = "Analog"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -27,6 +53,132 @@ }; }; +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + &sdhci { bus-width = <8>; no-sdio; diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi index d085e57fbc4c..8be75556af8f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi @@ -7,6 +7,74 @@ #include "rk3588-pinctrl.dtsi" / { + i2s8_8ch: i2s@fddc8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc8000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 22>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S8_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s6_8ch: i2s@fddf4000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf4000 0x0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 4>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S6_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s7_8ch: i2s@fddf8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf8000 0x0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 21>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S7_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s10_8ch: i2s@fde00000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfde00000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 24>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S10_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gmac0: ethernet@fe1b0000 { compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe1b0000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts new file mode 100644 index 000000000000..93b4a0c4ed0f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "Khadas Edge2"; + compatible = "khadas,edge2", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&sdhci { + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index a506948b5572..657c019d27fa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -60,6 +60,8 @@ enable-method = "psci"; capacity-dmips-mhz = <530>; clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <32768>; i-cache-line-size = <64>; @@ -136,6 +138,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -174,6 +178,8 @@ enable-method = "psci"; capacity-dmips-mhz = <1024>; clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>; + assigned-clock-rates = <816000000>; cpu-idle-states = <&CPU_SLEEP>; i-cache-size = <65536>; i-cache-line-size = <64>; @@ -313,10 +319,6 @@ scmi_clk: protocol@14 { reg = <0x14>; - assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>, - <&scmi_clk SCMI_CLK_CPUB23>; - assigned-clock-rates = <1200000000>, - <1200000000>; #clock-cells = <1>; }; @@ -423,7 +425,7 @@ <&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>, <&cru CLK_GPU>; assigned-clock-rates = - <100000000>, <786432000>, + <1100000000>, <786432000>, <850000000>, <1188000000>, <702000000>, <400000000>, <500000000>, @@ -819,6 +821,57 @@ }; }; + i2s4_8ch: i2s@fddc0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc0000 0x0 0x1000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 0>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S4_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s5_8ch: i2s@fddf0000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf0000 0x0 0x1000>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 2>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S5_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s9_8ch: i2s@fddfc000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddfc000 0x0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 23>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S9_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + qos_gpu_m0: qos@fdf35000 { compatible = "rockchip,rk3588-qos", "syscon"; reg = <0x0 0xfdf35000 0x0 0x20>; @@ -1108,6 +1161,21 @@ }; }; + sdmmc: mmc@fe2c0000 { + compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xfe2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + power-domains = <&power RK3588_PD_SDMMC>; + status = "disabled"; + }; + sdhci: mmc@fe2e0000 { compatible = "rockchip,rk3588-dwcmshc"; reg = <0x0 0xfe2e0000 0x0 0x10000>; @@ -1126,6 +1194,103 @@ status = "disabled"; }; + i2s0_8ch: i2s@fe470000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe470000 0x0 0x1000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdi1 + &i2s0_sdi2 + &i2s0_sdi3 + &i2s0_sdo0 + &i2s0_sdo1 + &i2s0_sdo2 + &i2s0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1_8ch: i2s@fe480000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfe480000 0x0 0x1000>; + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>; + reset-names = "tx-m", "rx-m"; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_lrck + &i2s1m0_sclk + &i2s1m0_sdi0 + &i2s1m0_sdi1 + &i2s1m0_sdi2 + &i2s1m0_sdi3 + &i2s1m0_sdo0 + &i2s1m0_sdo1 + &i2s1m0_sdo2 + &i2s1m0_sdo3>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2_2ch: i2s@fe490000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe490000 0x0 0x1000>; + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 0>, <&dmac1 1>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m1_lrck + &i2s2m1_sclk + &i2s2m1_sdi + &i2s2m1_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3_2ch: i2s@fe4a0000 { + compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xfe4a0000 0x0 0x1000>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + assigned-clocks = <&cru CLK_I2S3_2CH_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac1 2>, <&dmac1 3>; + dma-names = "tx", "rx"; + power-domains = <&power RK3588_PD_AUDIO>; + rockchip,trcm-sync-tx-only; + pinctrl-names = "default"; + pinctrl-0 = <&i2s3_lrck + &i2s3_sclk + &i2s3_sdi + &i2s3_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@fe600000 { compatible = "arm,gic-v3"; reg = <0x0 0xfe600000 0 0x10000>, /* GICD */ @@ -1235,6 +1400,14 @@ status = "disabled"; }; + wdt: watchdog@feaf0000 { + compatible = "rockchip,rk3588-wdt", "snps,dw-wdt"; + reg = <0x0 0xfeaf0000 0x0 0x100>; + clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>; + clock-names = "tclk", "pclk"; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>; + }; + spi0: spi@feb00000 { compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi"; reg = <0x0 0xfeb00000 0x0 0x1000>; @@ -1566,6 +1739,26 @@ status = "disabled"; }; + tsadc: tsadc@fec00000 { + compatible = "rockchip,rk3588-tsadc"; + reg = <0x0 0xfec00000 0x0 0x400>; + interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + assigned-clocks = <&cru CLK_TSADC>; + assigned-clock-rates = <2000000>; + resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>; + reset-names = "tsadc-apb", "tsadc"; + rockchip,hw-tshut-temp = <120000>; + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + pinctrl-0 = <&tsadc_gpio_func>; + pinctrl-1 = <&tsadc_shut>; + pinctrl-names = "gpio", "otpout"; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + i2c6: i2c@fec80000 { compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c"; reg = <0x0 0xfec80000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index f4f1f5148cc2..97522fb0bf66 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ sp9860g-1h10.dtb \ - sp9863a-1h10.dtb + sp9863a-1h10.dtb \ + ums512-1h10.dtb diff --git a/arch/arm64/boot/dts/sprd/ums512-1h10.dts b/arch/arm64/boot/dts/sprd/ums512-1h10.dts new file mode 100644 index 000000000000..46890f6d140d --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums512-1h10.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS512-1h10 boards DTS file + * + * Copyright (C) 2021, Unisoc Inc. + */ + +/dts-v1/; + +#include "ums512.dtsi" + +/ { + model = "Unisoc UMS512-1H10 Board"; + + compatible = "sprd,ums512-1h10", "sprd,ums512"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* SD card */ +&sdio0 { + bus-width = <4>; + no-sdio; + no-mmc; + sprd,phy-delay-sd-uhs-sdr104 = <0x7f 0x73 0x72 0x72>; + sprd,phy-delay-sd-uhs-sdr50 = <0x6e 0x7f 0x01 0x01>; + sprd,phy-delay-sd-highspeed = <0x7f 0x1a 0x9a 0x9a>; + sprd,phy-delay-legacy = <0x7f 0x1a 0x9a 0x9a>; + sd-uhs-sdr104; + sd-uhs-sdr50; +}; + +/* EMMC storage */ +&sdio3 { + status = "okay"; + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + cap-mmc-hw-reset; +}; diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi new file mode 100644 index 000000000000..024be594c47d --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums512.dtsi @@ -0,0 +1,911 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS512 SoC DTS file + * + * Copyright (C) 2021, Unisoc Inc. + */ + +#include <dt-bindings/clock/sprd,ums512-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + core4 { + cpu = <&CPU4>; + }; + core5 { + cpu = <&CPU5>; + }; + core6 { + cpu = <&CPU6>; + }; + core7 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + }; + + idle-states { + entry-method = "psci"; + CORE_PD: core-pd { + compatible = "arm,idle-state"; + entry-latency-us = <4000>; + exit-latency-us = <4000>; + min-residency-us = <10000>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@12000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x12000000 0 0x20000>, /* GICD */ + <0x0 0x12040000 0 0x100000>; /* GICR */ + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + redistributor-stride = <0x0 0x20000>; /* 128KB stride */ + #redistributor-regions = <1>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_ahb_regs: syscon@20100000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x20100000 0 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x20100000 0x4000>; + + apahb_gate: clock-controller@0 { + compatible = "sprd,ums512-apahb-gate"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + pub_apb_regs: syscon@31050000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x31050000 0 0x9000>; + }; + + top_dvfs_apb_regs: syscon@322a0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x322a0000 0 0x8000>; + }; + + ap_intc0_regs: syscon@32310000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32310000 0 0x1000>; + }; + + ap_intc1_regs: syscon@32320000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32320000 0 0x1000>; + }; + + ap_intc2_regs: syscon@32330000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32330000 0 0x1000>; + }; + + ap_intc3_regs: syscon@32340000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32340000 0 0x1000>; + }; + + ap_intc4_regs: syscon@32350000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32350000 0 0x1000>; + }; + + ap_intc5_regs: syscon@32360000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32360000 0 0x1000>; + }; + + anlg_phy_g0_regs: syscon@32390000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x32390000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x32390000 0x3000>; + + dpll0: clock-controller@0 { + compatible = "sprd,ums512-g0-pll"; + reg = <0x0 0x100>; + #clock-cells = <1>; + }; + }; + + anlg_phy_g2_regs: syscon@323b0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323b0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x323b0000 0x3000>; + + mpll1: clock-controller@0 { + compatible = "sprd,ums512-g2-pll"; + reg = <0x0 0x100>; + #clock-cells = <1>; + }; + }; + + anlg_phy_g3_regs: syscon@323c0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323c0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x323c0000 0x3000>; + + pll1: clock-controller@0 { + compatible = "sprd,ums512-g3-pll"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + anlg_phy_gc_regs: syscon@323e0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323e0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x323e0000 0x3000>; + + pll2: clock-controller@0 { + compatible = "sprd,ums512-gc-pll"; + reg = <0x0 0x100>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + anlg_phy_g10_regs: syscon@323f0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x323f0000 0 0x3000>; + }; + + aon_apb_regs: syscon@327d0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x327d0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x327d0000 0x3000>; + + aonapb_gate: clock-controller@0 { + compatible = "sprd,ums512-aon-gate"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + pmu_apb_regs: syscon@327e0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x327e0000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x327e0000 0x3000>; + + pmu_gate: clock-controller@0 { + compatible = "sprd,ums512-pmu-gate"; + reg = <0x0 0x3000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + }; + + audcp_apb_regs: syscon@3350d000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x3350d000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x3350d000 0x1000>; + + audcpapb_gate: clock-controller@0 { + compatible = "sprd,ums512-audcpapb-gate"; + reg = <0x0 0x300>; + #clock-cells = <1>; + }; + }; + + audcp_ahb_regs: syscon@335e0000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x335e0000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x335e0000 0x1000>; + + audcpahb_gate: clock-controller@0 { + compatible = "sprd,ums512-audcpahb-gate"; + reg = <0x0 0x300>; + #clock-cells = <1>; + }; + }; + + gpu_apb_regs: syscon@60100000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x60100000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x60100000 0x3000>; + + gpu_clk: clock-controller@0 { + compatible = "sprd,ums512-gpu-clk"; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + reg = <0x0 0x100>; + #clock-cells = <1>; + }; + }; + + gpu_dvfs_apb_regs: syscon@60110000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x60110000 0 0x3000>; + }; + + mm_ahb_regs: syscon@62200000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x62200000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x62200000 0x3000>; + + mm_gate: clock-controller@0 { + compatible = "sprd,ums512-mm-gate-clk"; + reg = <0x0 0x3000>; + #clock-cells = <1>; + }; + }; + + ap_apb_regs: syscon@71000000 { + compatible = "sprd,ums512-glbregs", "syscon", + "simple-mfd"; + reg = <0 0x71000000 0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x71000000 0x3000>; + + apapb_gate: clock-controller@0 { + compatible = "sprd,ums512-apapb-gate"; + reg = <0x0 0x3000>; + #clock-cells = <1>; + }; + }; + + ap_clk: clock-controller@20200000 { + compatible = "sprd,ums512-ap-clk"; + reg = <0 0x20200000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + + aon_clk: clock-controller@32080000 { + compatible = "sprd,ums512-aonapb-clk"; + reg = <0 0x32080000 0 0x1000>; + clocks = <&ext_26m>, <&ext_32k>, + <&ext_4m>, <&rco_100m>; + clock-names = "ext-26m", "ext-32k", + "ext-4m", "rco-100m"; + #clock-cells = <1>; + }; + + mm_clk: clock-controller@62100000 { + compatible = "sprd,ums512-mm-clk"; + reg = <0 0x62100000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "ext-26m"; + #clock-cells = <1>; + }; + + /* SoC Funnel */ + funnel@3c002000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3c002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_soc_out_port: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + funnel_soc_in_port: endpoint { + remote-endpoint = + <&funnel_corinth_out_port>; + }; + }; + }; + }; + + /* SoC ETF */ + soc_etb: etb@3c003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x3c003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + in-ports { + port { + etb_in: endpoint { + remote-endpoint = + <&funnel_soc_out_port>; + }; + }; + }; + }; + + /* AP-CPU Funnel for core3/4/5/7 */ + funnel@3e001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3e001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_corinth_lit_out_port: endpoint { + remote-endpoint = + <&corinth_etf_lit_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_core_in_port3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_core_in_port4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_core_in_port5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_core_in_port7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + /* AP-CPU ETF for little cores */ + etf@3e002000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x3e002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + corinth_etf_lit_out: endpoint { + remote-endpoint = + <&funnel_corinth_from_lit_in_port>; + }; + }; + }; + + in-ports { + port { + corinth_etf_lit_in: endpoint { + remote-endpoint = + <&funnel_corinth_lit_out_port>; + }; + }; + }; + }; + + /* AP-CPU ETF for big cores */ + etf@3e003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x3e003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + corinth_etf_big_out: endpoint { + remote-endpoint = + <&funnel_corinth_from_big_in_port>; + }; + }; + }; + + in-ports { + port { + corinth_etf_big_in: endpoint { + remote-endpoint = + <&funnel_corinth_big_out_port>; + }; + }; + }; + }; + + /* Funnel to SoC */ + funnel@3e004000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3e004000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_corinth_out_port: endpoint { + remote-endpoint = + <&funnel_soc_in_port>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_corinth_from_lit_in_port: endpoint { + remote-endpoint = <&corinth_etf_lit_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_corinth_from_big_in_port: endpoint { + remote-endpoint = <&corinth_etf_big_out>; + }; + }; + }; + }; + + /* AP-CPU Funnel for core0/1/2/6 */ + funnel@3e005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x3e005000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_corinth_big_out_port: endpoint { + remote-endpoint = <&corinth_etf_big_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_core_in_port0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_core_in_port1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_core_in_port2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_core_in_port6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + }; + }; + + etm0: etm@3f040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f040000 0 0x1000>; + cpu = <&CPU0>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&funnel_core_in_port0>; + }; + }; + }; + }; + + etm1: etm@3f140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f140000 0 0x1000>; + cpu = <&CPU1>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&funnel_core_in_port1>; + }; + }; + }; + }; + + etm2: etm@3f240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f240000 0 0x1000>; + cpu = <&CPU2>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&funnel_core_in_port2>; + }; + }; + }; + }; + + etm3: etm@3f340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f340000 0 0x1000>; + cpu = <&CPU3>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&funnel_core_in_port3>; + }; + }; + }; + }; + + etm4: etm@3f440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f440000 0 0x1000>; + cpu = <&CPU4>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&funnel_core_in_port4>; + }; + }; + }; + }; + + etm5: etm@3f540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f540000 0 0x1000>; + cpu = <&CPU5>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&funnel_core_in_port5>; + }; + }; + }; + }; + + etm6: etm@3f640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f640000 0 0x1000>; + cpu = <&CPU6>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&funnel_core_in_port6>; + }; + }; + }; + }; + + etm7: etm@3f740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x3f740000 0 0x1000>; + cpu = <&CPU7>; + clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; + clock-names = "apb_pclk", "clk_cs", "cs_src"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&funnel_core_in_port7>; + }; + }; + }; + }; + + apb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x70000000 0x10000000>; + + uart0: serial@0 { + compatible = "sprd,ums512-uart", + "sprd,sc9836-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@100000 { + compatible = "sprd,ums512-uart", + "sprd,sc9836-uart"; + reg = <0x100000 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + sdio0: mmc@1100000 { + compatible = "sprd,sdhci-r11"; + reg = <0x1100000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sdio", "enable"; + clocks = <&ap_clk CLK_SDIO0_2X>, + <&apapb_gate CLK_SDIO0_EB>; + assigned-clocks = <&ap_clk CLK_SDIO0_2X>; + assigned-clock-parents = <&pll1 CLK_RPLL>; + status = "disabled"; + }; + + sdio3: mmc@1400000 { + compatible = "sprd,sdhci-r11"; + reg = <0x1400000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sdio", "enable"; + clocks = <&ap_clk CLK_EMMC_2X>, + <&apapb_gate CLK_EMMC_EB>; + assigned-clocks = <&ap_clk CLK_EMMC_2X>; + assigned-clock-parents = <&pll1 CLK_RPLL>; + status = "disabled"; + }; + }; + + aon: bus@32000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x32000000 0x1000000>; + + adi_bus: spi@100000 { + compatible = "sprd,ums512-adi"; + reg = <0x100000 0x100000>; + #address-cells = <1>; + #size-cells = <0>; + sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>, + <17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>, + <35 0x19b8>, <39 0x19ac>; + }; + }; + }; + + ext_26m: clk-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext-26m"; + }; + + ext_32k: clk-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ext-32k"; + }; + + ext_4m: clk-4m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <4000000>; + clock-output-names = "ext-4m"; + }; + + rco_100m: clk-100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "rco-100m"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 6acd12409d59..c83c9d772b81 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -9,7 +9,9 @@ # alphabetically. # Boards with AM62x SoC +dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb # Boards with AM62Ax SoC dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb @@ -28,11 +30,13 @@ dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb # Boards with J7200 SoC -dtb-$(CONFIG_ARCH_K3) += k3-j7200-common-proc-board.dtb +k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb # Boards with J721e SoC +k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb -dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb # Boards with J721s2 SoC diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts new file mode 100644 index 000000000000..4b94f7a86316 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP + * + * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-am62x-sk-common.dtsi" + +/ { + compatible = "ti,am62-lp-sk", "ti,am625"; + model = "Texas Instruments AM62x LP SK"; + + vmain_pd: regulator-0 { + /* TPS65988 PD CONTROLLER OUTPUT */ + compatible = "regulator-fixed"; + regulator-name = "vmain_pd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_5v0: regulator-1 { + /* Output of TPS630702RNMR */ + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sys: regulator-2 { + /* output of LM61460-Q1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vmain_pd>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-3 { + /* TPS22918DBVR */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc_3v3_sys>; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + }; + + vddshv_sdio: regulator-4 { + compatible = "regulator-gpio"; + regulator-name = "vddshv_sdio"; + pinctrl-names = "default"; + pinctrl-0 = <&vddshv_sdio_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&ldo1_reg>; + gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; +}; + +&main_pmx0 { + vddshv_sdio_pins_default: vddshv-sdio-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ + >; + }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */ + >; + }; + + pmic_irq_pins_default: pmic-irq-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */ + >; + }; +}; + +&main_i2c1 { + exp1: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "PRU_DETECT", "MMC1_SD_EN", + "VPP_LDO_EN", "EXP_PS_3V3_En", + "EXP_PS_5V0_En", "EXP_HAT_DETECT", + "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", + "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC", + "GPIO_HDMI_RSTn", "CSI_GPIO0", + "CSI_GPIO1", "GPIO_OLDI_INT", + "HDMI_INTn", "TEST_GPIO2", + "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", + "MCASP1_FET_SEL", "UART1_FET_SEL", + "", "IO_EXP_TEST_LED"; + + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + }; + + exp2: gpio@23 { + compatible = "ti,tca6424"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "", "", + "", "", + "", "", + "", "", + "WL_LT_EN", "CSI_RSTz", + "", "", + "", "", + "", "", + "SPI0_FET_SEL", "SPI0_FET_OE", + "GPIO_OLDI_RSTn", "PRU_3V3_EN", + "", "", + "CSI_VLDO_SEL", "SOC_WLAN_SDIO_RST"; + }; +}; + +&sdhci1 { + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vddshv_sdio>; +}; + +&cpsw_port2 { + status = "disabled"; +}; + +&main_i2c0 { + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_3v3_sys>; + buck2-supply = <&vcc_3v3_sys>; + buck3-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&buck2_reg>; + ldo3-supply = <&vcc_3v3_sys>; + ldo4-supply = <&vcc_3v3_sys>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VCC1V8_SYS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDDAR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&tlv320aic3106 { + DVDD-supply = <&buck2_reg>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index ea683fd77d6a..b3e4857bbbe4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -461,7 +461,7 @@ <193>, <194>, <195>; interrupt-controller; #interrupt-cells = <2>; - ti,ngpio = <87>; + ti,ngpio = <92>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 77 0>; @@ -478,7 +478,7 @@ <183>, <184>, <185>; interrupt-controller; #interrupt-cells = <2>; - ti,ngpio = <88>; + ti,ngpio = <52>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 78 0>; @@ -758,6 +758,51 @@ status = "disabled"; }; + main_rti0: watchdog@e000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e000000 0x00 0x100>; + clocks = <&k3_clks 125 0>; + power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 125 0>; + assigned-clock-parents = <&k3_clks 125 2>; + }; + + main_rti1: watchdog@e010000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e010000 0x00 0x100>; + clocks = <&k3_clks 126 0>; + power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 126 0>; + assigned-clock-parents = <&k3_clks 126 2>; + }; + + main_rti2: watchdog@e020000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e020000 0x00 0x100>; + clocks = <&k3_clks 127 0>; + power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 127 0>; + assigned-clock-parents = <&k3_clks 127 2>; + }; + + main_rti3: watchdog@e030000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e030000 0x00 0x100>; + clocks = <&k3_clks 128 0>; + power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 128 0>; + assigned-clock-parents = <&k3_clks 128 2>; + }; + + main_rti15: watchdog@e0f0000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x0e0f0000 0x00 0x100>; + clocks = <&k3_clks 130 0>; + power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 130 0>; + assigned-clock-parents = <&k3_clks 130 2>; + }; + epwm0: pwm@23000000 { compatible = "ti,am64-epwm", "ti,am3352-ehrpwm"; #pwm-cells = <3>; @@ -787,4 +832,64 @@ clock-names = "tbclk", "fck"; status = "disabled"; }; + + mcasp0: audio-controller@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b00000 0x00 0x2000>, + <0x00 0x02b08000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 190 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 190 0>; + assigned-clock-parents = <&k3_clks 190 2>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp1: audio-controller@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b10000 0x00 0x2000>, + <0x00 0x02b18000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 191 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 191 0>; + assigned-clock-parents = <&k3_clks 191 2>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + + mcasp2: audio-controller@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x00 0x02b20000 0x00 0x2000>, + <0x00 0x02b28000 0x00 0x400>; + reg-names = "mpu", "dat"; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 192 0>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 192 0>; + assigned-clock-parents = <&k3_clks 192 2>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi index a427231527c3..076601a41e84 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi @@ -130,4 +130,15 @@ clocks = <&k3_clks 79 0>; clock-names = "gpio"; }; + + mcu_rti0: watchdog@4880000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x04880000 0x00 0x100>; + clocks = <&k3_clks 131 0>; + power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 131 0>; + assigned-clock-parents = <&k3_clks 131 2>; + /* Tightly coupled to M4F */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi index 38dced6b4fef..7726ebae2539 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi @@ -40,4 +40,25 @@ clock-names = "fck"; status = "disabled"; }; + + wkup_rtc0: rtc@2b1f0000 { + compatible = "ti,am62-rtc"; + reg = <0x00 0x2b1f0000 0x00 0x100>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 117 6> , <&k3_clks 117 0>; + clock-names = "vbus", "osc32k"; + power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>; + wakeup-source; + }; + + wkup_rti0: watchdog@2b000000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x00 0x2b000000 0x00 0x100>; + clocks = <&k3_clks 132 0>; + power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>; + assigned-clocks = <&k3_clks 132 0>; + assigned-clock-parents = <&k3_clks 132 2>; + /* Used by DM firmware */ + status = "reserved"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi index 37fcbe7a3c33..a401f5225243 100644 --- a/arch/arm64/boot/dts/ti/k3-am62.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM625 SoC"; compatible = "ti,am625"; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts new file mode 100644 index 000000000000..cb46c38ce2cc --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -0,0 +1,758 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * https://beagleplay.org/ + * + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "k3-am625.dtsi" + +/ { + compatible = "beagle,am625-beagleplay", "ti,am625"; + model = "BeagleBoard.org BeaglePlay"; + + aliases { + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + gpio0 = &main_gpio0; + gpio1 = &main_gpio1; + gpio2 = &mcu_gpio0; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + i2c2 = &main_i2c2; + i2c3 = &main_i2c3; + i2c4 = &wkup_i2c0; + i2c5 = &mcu_i2c0; + mdio-gpio0 = &mdio0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + rtc0 = &rtc; + serial0 = &main_uart5; + serial1 = &main_uart6; + serial2 = &main_uart0; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops: ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9c700000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3: regulator-2 { + /* output of TLV62595DMQR-U12 */ + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + wlan_en: regulator-3 { + /* OUTPUT of SN74AVC2T244DQMR */ + compatible = "regulator-fixed"; + regulator-name = "wlan_en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + regulator-always-on; + vin-supply = <&vdd_3v3>; + gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_pins_default>; + }; + + vdd_3v3_sd: regulator-4 { + /* output of TPS22918DBVR-U21 */ + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + vin-supply = <&vdd_3v3>; + gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>; + }; + + vdd_sd_dv: regulator-5 { + compatible = "regulator-gpio"; + regulator-name = "sd_hs200_switch"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&ldo1_reg>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + + led-1 { + gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + function = LED_FUNCTION_DISK_ACTIVITY; + default-state = "keep"; + }; + + led-2 { + gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CPU; + }; + + led-3 { + gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_LAN; + }; + + led-4 { + gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_WLAN; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&usr_button_pins_default>; + + usr: button-usr { + label = "User Key"; + linux,code = <BTN_0>; + gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>; + }; + + }; + + /* Workaround for errata i2329 - just use mdio bitbang */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */ + <&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <25>; + reset-deassert-us = <60000>; /* T2 */ + }; + }; +}; + +&main_pmx0 { + gpio0_pins_default: gpio0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */ + AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */ + AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */ + AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */ + AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */ + AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */ + AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */ + AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */ + AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */ + AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */ + AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */ + AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */ + AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ + AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ + >; + }; + + usr_button_pins_default: usr-button-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */ + >; + }; + + grove_pins_default: grove-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ + AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ + >; + }; + + local_i2c_pins_default: local-i2c-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ + AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ + >; + }; + + i2c2_1v8_pins_default: i2c2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ + AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + mdio0_pins_default: mdio0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */ + AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */ + >; + }; + + rgmii1_pins_default: rgmii1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ + AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ + AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ + AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ + AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ + AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ + AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ + AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ + AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ + AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ + AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ + AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ + >; + }; + + emmc_pins_default: emmc-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */ + >; + }; + + sd_pins_default: sd-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ + AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ + AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ + AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ + AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ + AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */ + >; + }; + + wifi_pins_default: wifi-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */ + AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */ + AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */ + AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */ + AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */ + AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */ + AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */ + AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */ + >; + }; + + wifi_en_pins_default: wifi-en-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ + >; + }; + + wifi_wlirq_pins_default: wifi-wlirq-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ + >; + }; + + spe_pins_default: spe-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */ + AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */ + AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */ + AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */ + AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */ + AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */ + AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */ + AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */ + AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */ + AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */ + AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */ + >; + }; + + mikrobus_i2c_pins_default: mikrobus-i2c-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */ + AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */ + >; + }; + + mikrobus_uart_pins_default: mikrobus-uart-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */ + AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */ + >; + }; + + mikrobus_spi_pins_default: mikrobus-spi-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */ + AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */ + AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */ + AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */ + >; + }; + + mikrobus_gpio_pins_default: mikrobus-gpio-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */ + AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */ + AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */ + >; + }; + + console_pins_default: console-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ + AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ + >; + }; + + wifi_debug_uart_pins_default: wifi-debug-uart-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */ + AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */ + >; + }; + + usb1_pins_default: usb1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */ + >; + }; + + pmic_irq_pins_default: pmic-irq-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */ + >; + }; +}; + +&mcu_pmx0 { + i2c_qwiic_pins_default: i2c-qwiic-pins-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */ + AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ + >; + }; + + gbe_pmx_obsclk: gbe-pmx-clk-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */ + >; + }; + + i2c_csi_pins_default: i2c-csi-pins-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */ + AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */ + >; + }; + + wifi_32k_clk: mcu-clk-out-pins-default { + pinctrl-single,pins = < + AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ + >; + }; +}; + +&a53_opp_table { + /* Requires VDD_CORE to be at 0.85V */ + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + }; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_csi_pins_default>; + clock-frequency = <400000>; + /* Enable with overlay for camera sensor */ +}; + +&mcu_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_qwiic_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; +}; + +&usbss1 { + ti,vbus-divider; + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_default>; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>, + <&gbe_pmx_obsclk>; + assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>; + assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + phy-mode = "rmii"; + phy-handle = <&cpsw3g_phy1>; +}; + +&cpsw3g_mdio { + /* Workaround for errata i2329 - Use mdio bitbang */ + status = "disabled"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_pins_default>; + gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT", /* 0-2 */ + "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */ + "EEPROM_WP", /* 10 */ + "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */ + "CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "", /* 13-17 */ + "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */ + "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */ + "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 43-54 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */ + "", "", "", "", "", "", /* 79-84 */ + "BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK", /* 85-86 */ + "", "", "", "", ""; /* 87-91 */ +}; + +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_gpio_pins_default>; + gpio-line-names = "", "", "", "", "", /* 0-4 */ + "SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7", /* 5-7 */ + "MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9", /* 8-9 */ + "MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11", /* 10-11 */ + "MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0", /* 12-13 */ + "MIKROBUS_GPIO1_14", /* 14 */ + "", "", "", "", "VDD_3V3_SD", "", "", /* 15-21 */ + "MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23", /* 22-23 */ + "MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25", /* 24-25 */ + "", "", "", "", "", "", "", "", "", "", "", "", /* 26-37 */ + "", "", "", "", "", "", "", "", "", "", /* 38-47 */ + "SD_CD", "SD_VOLT_SEL", "", ""; /* 48-51 */ +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&local_i2c_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + rtc: rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + interrupt-parent = <&main_gpio0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo2-supply = <&buck2_reg>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* + * Regulator is left as is unused, vdd_sd + * is controlled via GPIO with bypass config + * as per the NVM configuration + */ + regulator-name = "VDD_SD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDDA_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDD_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&grove_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_1v8_pins_default>; + clock-frequency = <100000>; + status = "okay"; +}; + +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_i2c_pins_default>; + clock-frequency = <400000>; + status = "okay"; +}; + +&main_spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_spi_pins_default>; + status = "okay"; +}; + +&sdhci0 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + status = "okay"; +}; + +&sdhci1 { + /* SD/MMC */ + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins_default>; + + vmmc-supply = <&vdd_3v3_sd>; + vqmmc-supply = <&vdd_sd_dv>; + ti,driver-strength-ohm = <50>; + disable-wp; + cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>; + cd-debounce-delay-ms = <100>; + ti,fails-without-test-cd; + status = "okay"; +}; + +&sdhci2 { + vmmc-supply = <&wlan_en>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>; + bus-width = <4>; + non-removable; + ti,fails-without-test-cd; + cap-power-off-card; + keep-power-in-suspend; + ti,driver-strength-ohm = <50>; + assigned-clocks = <&k3_clks 157 158>; + assigned-clock-parents = <&k3_clks 157 160>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1807"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wlirq_pins_default>; + interrupt-parent = <&main_gpio0>; + interrupts = <41 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&console_pins_default>; + status = "okay"; +}; + +&main_uart1 { + /* Main UART1 is used by TIFS firmware */ + status = "reserved"; +}; + +&main_uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&mikrobus_uart_pins_default>; + status = "okay"; +}; + +&main_uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&wifi_debug_uart_pins_default>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 6bc7d63cf52f..2a1adda9bff6 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -7,32 +7,12 @@ /dts-v1/; -#include <dt-bindings/leds/common.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/net/ti-dp83867.h> -#include "k3-am625.dtsi" +#include "k3-am62x-sk-common.dtsi" / { compatible = "ti,am625-sk", "ti,am625"; model = "Texas Instruments AM625 SK"; - aliases { - serial2 = &main_uart0; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - mmc2 = &sdhci2; - spi0 = &ospi0; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - usb0 = &usb0; - usb1 = &usb1; - }; - - chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; - }; - opp-table { /* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */ opp-1400000000 { @@ -49,39 +29,6 @@ }; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ramoops@9ca00000 { - compatible = "ramoops"; - reg = <0x00 0x9ca00000 0x00 0x00100000>; - record-size = <0x8000>; - console-size = <0x8000>; - ftrace-size = <0x00>; - pmsg-size = <0x8000>; - }; - - secure_tfa_ddr: tfa@9e780000 { - reg = <0x00 0x9e780000 0x00 0x80000>; - alignment = <0x1000>; - no-map; - }; - - secure_ddr: optee@9e800000 { - reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ - alignment = <0x1000>; - no-map; - }; - - wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { - compatible = "shared-dma-pool"; - reg = <0x00 0x9db00000 0x00 0xc00000>; - no-map; - }; - }; - vmain_pd: regulator-0 { /* TPS65988 PD CONTROLLER OUTPUT */ compatible = "regulator-fixed"; @@ -141,107 +88,19 @@ <3300000 0x1>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&usr_led_pins_default>; - - led-0 { - label = "am62-sk:green:heartbeat"; - gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - function = LED_FUNCTION_HEARTBEAT; - default-state = "off"; - }; + vcc_1v8: regulator-5 { + /* output of TPS6282518DMQ */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3_sys>; + regulator-always-on; + regulator-boot-on; }; }; &main_pmx0 { - main_uart0_pins_default: main-uart0-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ - AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */ - >; - }; - - main_i2c0_pins_default: main-i2c0-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */ - AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */ - >; - }; - - main_i2c1_pins_default: main-i2c1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ - AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ - >; - }; - - main_i2c2_pins_default: main-i2c2-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ - AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ - >; - }; - - main_mmc0_pins_default: main-mmc0-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */ - >; - }; - - main_mmc1_pins_default: main-mmc1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ - AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ - AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ - AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ - AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ - AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */ - AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */ - >; - }; - - usr_led_pins_default: usr-led-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ - >; - }; - - main_mdio1_pins_default: main-mdio1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ - AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ - >; - }; - - main_rgmii1_pins_default: main-rgmii1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */ - AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */ - AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */ - AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */ - AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */ - AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */ - AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */ - AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */ - AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */ - AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */ - AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */ - AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */ - >; - }; - main_rgmii2_pins_default: main-rgmii2-pins-default { pinctrl-single,pins = < AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */ @@ -286,43 +145,9 @@ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */ >; }; - - main_usb1_pins_default: main-usb1-pins-default { - pinctrl-single,pins = < - AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ - >; - }; -}; - -&wkup_uart0 { - /* WKUP UART0 is used by DM firmware */ - status = "reserved"; -}; - -&main_uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_uart0_pins_default>; -}; - -&main_uart1 { - /* Main UART1 is used by TIFS firmware */ - status = "reserved"; -}; - -&main_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; }; &main_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; - exp1: gpio@22 { compatible = "ti,tca6424"; reg = <0x22>; @@ -351,23 +176,9 @@ }; }; -&sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; -}; - &sdhci1 { - /* SD/MMC */ - status = "okay"; vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc1_pins_default>; - ti,driver-strength-ohm = <50>; - disable-wp; }; &cpsw3g { @@ -376,28 +187,12 @@ &main_rgmii2_pins_default>; }; -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy0>; -}; - &cpsw_port2 { phy-mode = "rgmii-rxid"; phy-handle = <&cpsw3g_phy1>; }; &cpsw3g_mdio { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&main_mdio1_pins_default>; - - cpsw3g_phy0: ethernet-phy@0 { - reg = <0>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - ti,min-output-impedance; - }; - cpsw3g_phy1: ethernet-phy@1 { reg = <1>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; @@ -473,21 +268,6 @@ }; }; -&usbss0 { - status = "okay"; - ti,vbus-divider; -}; - -&usbss1 { - status = "okay"; -}; - -&usb0 { - dr_mode = "peripheral"; -}; - -&usb1 { - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&main_usb1_pins_default>; +&tlv320aic3106 { + DVDD-supply = <&vcc_1v8>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi index acc7f8ab6426..4193c2b3eed6 100644 --- a/arch/arm64/boot/dts/ti/k3-am625.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi @@ -148,7 +148,7 @@ compatible = "cache"; cache-unified; cache-level = <2>; - cache-size = <0x40000>; + cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi index 6eb87c3f9f3c..fe60c9ce21e3 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM62A SoC"; compatible = "ti,am62a7"; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 5c9012141ee2..f6a67f072dca 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -27,8 +27,9 @@ memory@80000000 { device_type = "memory"; - /* 2G RAM */ - reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; }; reserved-memory { diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi index 9734549851c0..58f1c43edcf8 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi @@ -97,7 +97,7 @@ compatible = "cache"; cache-unified; cache-level = <2>; - cache-size = <0x40000>; + cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi new file mode 100644 index 000000000000..976f8303c84f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common dtsi for AM62x SK and derivatives + * + * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-am625.dtsi" + +/ { + aliases { + serial2 = &main_uart0; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + mmc2 = &sdhci2; + spi0 = &ospi0; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@9ca00000 { + compatible = "ramoops"; + reg = <0x00 0x9ca00000 0x00 0x00100000>; + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x00>; + pmsg-size = <0x8000>; + }; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + alignment = <0x1000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ + alignment = <0x1000>; + no-map; + }; + + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 { + compatible = "shared-dma-pool"; + reg = <0x00 0x9db00000 0x00 0xc00000>; + no-map; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&usr_led_pins_default>; + + led-0 { + label = "am62-sk:green:heartbeat"; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_HEARTBEAT; + default-state = "off"; + }; + }; + + tlv320_mclk: clk-0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12288000>; + }; + + codec_audio: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM62x-SKEVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Microphone", "Microphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&tlv320_mclk>; + }; + }; +}; + +&main_pmx0 { + /* First pad number is ALW package and second is AMC package */ + main_uart0_pins_default: main-uart0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */ + AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */ + AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */ + AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */ + >; + }; + + main_i2c2_pins_default: main-i2c2-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */ + AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ + >; + }; + + main_mmc0_pins_default: main-mmc0-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ + >; + }; + + main_mmc1_pins_default: main-mmc1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ + AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ + AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */ + AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */ + AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */ + AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */ + AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */ + >; + }; + + usr_led_pins_default: usr-led-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */ + >; + }; + + main_mdio1_pins_default: main-mdio1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */ + AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */ + >; + }; + + main_rgmii1_pins_default: main-rgmii1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */ + AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */ + AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */ + AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */ + AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */ + AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */ + AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */ + AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */ + AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */ + AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */ + AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */ + AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */ + >; + }; + + main_usb1_pins_default: main-usb1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */ + >; + }; + + main_mcasp1_pins_default: main-mcasp1-pins-default { + pinctrl-single,pins = < + AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24) GPMC0_BE0N_CLE.MCASP1_ACLKX */ + AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */ + AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEN.MCASP1_AXR0 */ + AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23) GPMC0_ADVN_ALE.MCASP1_AXR2 */ + >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by DM firmware */ + status = "reserved"; +}; + +&main_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; +}; + +&main_uart1 { + /* Main UART1 is used by TIFS firmware */ + status = "reserved"; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; +}; + +&main_i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + tlv320aic3106: audio-codec@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + ai3x-micbias-vg = <1>; /* 2.0V */ + + /* Regulators */ + AVDD-supply = <&vcc_3v3_sys>; + IOVDD-supply = <&vcc_3v3_sys>; + DRVDD-supply = <&vcc_3v3_sys>; + }; +}; + +&sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&sdhci1 { + /* SD/MMC */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&main_rgmii1_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mdio1_pins_default>; + + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mailbox0_cluster0 { + mbox_m4_0: mbox-m4-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&usbss0 { + status = "okay"; + ti,vbus-divider; +}; + +&usbss1 { + status = "okay"; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "peripheral"; +}; + +&usb1 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb1_pins_default>; +}; + +&mcasp1 { + status = "okay"; + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&main_mcasp1_pins_default>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 0 2 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi index c858725133af..60fe95b48312 100644 --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM642 SoC"; compatible = "ti,am642"; diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index c538a0bf3cdd..3093ef6b9b23 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -8,9 +8,10 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM654 SoC"; compatible = "ti,am654"; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 2091cd2431fb..27a43a8ecffd 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -60,7 +60,7 @@ regulator-boot-on; enable-active-high; vin-supply = <&vsys_3v3>; - gpio = <&exp1 10 GPIO_ACTIVE_HIGH>; + gpio = <&exp1 8 GPIO_ACTIVE_HIGH>; }; vdd_sd_dv: regulator-tlv71033 { @@ -264,12 +264,10 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; - gpio-line-names = "CSI_VIO_SEL", "CSI_SEL_FPC_EXPn", "HDMI_PDn", - "HDMI_LS_OE", "DP0_3V3 _EN", "BOARDID_EEPROM_WP", - "CAN_STB", " ", "GPIO_uSD_PWR_EN", "eDP_ENABLE", - "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_MCU_RGMII_RSTz", - "IO_EXP_CSI2_EXP_RSTz", " ", "CSI0_B_GPIO1", - "CSI1_B_GPIO1"; + gpio-line-names = " ", " ", " ", " ", " ", + "BOARDID_EEPROM_WP", "CAN_STB", " ", + "GPIO_uSD_PWR_EN", " ", "IO_EXP_PCIe1_M.2_RTSz", + "IO_EXP_MCU_RGMII_RST#", " ", " ", " ", " "; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso new file mode 100644 index 000000000000..31b932eebc0a --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with + * J7200 board. + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mux/ti-serdes.h> + +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1"; + ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2"; + ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3"; + ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4"; + }; +}; + +&cpsw0 { + status = "okay"; +}; + +&cpsw0_port1 { + status = "okay"; + phy-handle = <&cpsw5g_phy0>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 1>; +}; + +&cpsw0_port2 { + status = "okay"; + phy-handle = <&cpsw5g_phy1>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 2>; +}; + +&cpsw0_port3 { + status = "okay"; + phy-handle = <&cpsw5g_phy2>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 3>; +}; + +&cpsw0_port4 { + status = "okay"; + phy-handle = <&cpsw5g_phy3>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 4>; +}; + +&cpsw5g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <120000>; + #address-cells = <1>; + #size-cells = <0>; + + cpsw5g_phy0: ethernet-phy@16 { + reg = <16>; + }; + cpsw5g_phy1: ethernet-phy@17 { + reg = <17>; + }; + cpsw5g_phy2: ethernet-phy@18 { + reg = <18>; + }; + cpsw5g_phy3: ethernet-phy@19 { + reg = <19>; + }; +}; + +&exp2 { + qsgmii-line-hog { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "qsgmii-pwrdn-line"; + }; +}; + +&main_pmx0 { + mdio0_pins_default: mdio0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */ + J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 138381f43ce4..ef352e32f19d 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -39,6 +39,13 @@ <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ }; + cpsw0_phy_gmii_sel: phy@4044 { + compatible = "ti,j7200-cpsw5g-phy-gmii-sel"; + ti,qsgmii-main-ports = <1>; + reg = <0x4044 0x10>; + #phy-cells = <1>; + }; + usb_serdes_mux: mux-controller@4000 { compatible = "mmio-mux"; #mux-control-cells = <1>; @@ -304,6 +311,87 @@ }; }; + cpsw0: ethernet@c000000 { + compatible = "ti,j7200-cpswxg-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x00 0xc000000 0x00 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>; + clocks = <&k3_clks 19 33>; + clock-names = "fck"; + power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xca00>, + <&main_udmap 0xca01>, + <&main_udmap 0xca02>, + <&main_udmap 0xca03>, + <&main_udmap 0xca04>, + <&main_udmap 0xca05>, + <&main_udmap 0xca06>, + <&main_udmap 0xca07>, + <&main_udmap 0x4a00>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + cpsw0_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + status = "disabled"; + }; + + cpsw0_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + status = "disabled"; + }; + + cpsw0_port3: port@3 { + reg = <3>; + ti,mac-only; + label = "port3"; + status = "disabled"; + }; + + cpsw0_port4: port@4 { + reg = <4>; + ti,mac-only; + label = "port4"; + status = "disabled"; + }; + }; + + cpsw5g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x00 0xf00 0x00 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 19 33>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x00 0x3d000 0x00 0x400>; + clocks = <&k3_clks 19 16>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ @@ -777,6 +865,94 @@ clock-names = "gpio"; }; + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 266 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 267 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 268 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 269 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 270 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 271 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 272 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 273 1>; + status = "disabled"; + }; + watchdog0: watchdog@2200000 { compatible = "ti,j7-rti-wdt"; reg = <0x0 0x2200000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index de56a0165bd0..331b4e482e41 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -305,6 +305,39 @@ status = "disabled"; }; + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 274 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 275 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 0>; + status = "disabled"; + }; + fss: syscon@47000000 { compatible = "syscon", "simple-mfd"; reg = <0x00 0x47000000 0x00 0x100>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi index d74f86b0f622..bbe380c72a7e 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J7200 SoC"; compatible = "ti,j7200"; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso new file mode 100644 index 000000000000..6ff7b6ad33ed --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with + * J721E board. + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mux/ti-serdes.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/phy/phy-cadence.h> + +#include "k3-pinctrl.h" + +&{/} { + aliases { + ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1"; + ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2"; + ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3"; + ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4"; + }; +}; + +&cpsw0 { + status = "okay"; +}; + +&cpsw0_port1 { + status = "okay"; + phy-handle = <&cpsw9g_phy0>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 1>; +}; + +&cpsw0_port2 { + status = "okay"; + phy-handle = <&cpsw9g_phy1>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 2>; +}; + +&cpsw0_port3 { + status = "okay"; + phy-handle = <&cpsw9g_phy2>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 3>; +}; + +&cpsw0_port4 { + status = "okay"; + phy-handle = <&cpsw9g_phy3>; + phy-mode = "qsgmii"; + mac-address = [00 00 00 00 00 00]; + phys = <&cpsw0_phy_gmii_sel 4>; +}; + +&cpsw9g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_pins_default>; + reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <120000>; + #address-cells = <1>; + #size-cells = <0>; + + cpsw9g_phy0: ethernet-phy@17 { + reg = <17>; + }; + cpsw9g_phy1: ethernet-phy@16 { + reg = <16>; + }; + cpsw9g_phy2: ethernet-phy@18 { + reg = <18>; + }; + cpsw9g_phy3: ethernet-phy@19 { + reg = <19>; + }; +}; + +&exp2 { + qsgmii-line-hog { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "qsgmii-pwrdn-line"; + }; +}; + +&main_pmx0 { + mdio0_pins_default: mdio0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */ + J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */ + >; + }; +}; + +&serdes_ln_ctrl { + idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>, + <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>, + <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>, + <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>, + <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>, + <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; +}; + +&serdes_wiz0 { + status = "okay"; +}; + +&serdes0 { + status = "okay"; + + assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>; + assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>; + #address-cells = <1>; + #size-cells = <0>; + + serdes0_qsgmii_link: phy@1 { + reg = <1>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_QSGMII>; + resets = <&serdes_wiz0 2>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index c935622f0102..10c8a5fb4ee2 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -61,6 +61,13 @@ <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>; }; + cpsw0_phy_gmii_sel: phy@4044 { + compatible = "ti,j721e-cpsw9g-phy-gmii-sel"; + ti,qsgmii-main-ports = <2>, <2>; + reg = <0x4044 0x20>; + #phy-cells = <1>; + }; + usb_serdes_mux: mux-controller@4000 { compatible = "mmio-mux"; #mux-control-cells = <1>; @@ -404,6 +411,115 @@ }; }; + cpsw0: ethernet@c000000 { + compatible = "ti,j721e-cpswxg-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0xc000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x0c000000 0x0 0x200000>; + clocks = <&k3_clks 19 89>; + clock-names = "fck"; + power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>; + + dmas = <&main_udmap 0xca00>, + <&main_udmap 0xca01>, + <&main_udmap 0xca02>, + <&main_udmap 0xca03>, + <&main_udmap 0xca04>, + <&main_udmap 0xca05>, + <&main_udmap 0xca06>, + <&main_udmap 0xca07>, + <&main_udmap 0x4a00>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + status = "disabled"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + cpsw0_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + status = "disabled"; + }; + + cpsw0_port2: port@2 { + reg = <2>; + ti,mac-only; + label = "port2"; + status = "disabled"; + }; + + cpsw0_port3: port@3 { + reg = <3>; + ti,mac-only; + label = "port3"; + status = "disabled"; + }; + + cpsw0_port4: port@4 { + reg = <4>; + ti,mac-only; + label = "port4"; + status = "disabled"; + }; + + cpsw0_port5: port@5 { + reg = <5>; + ti,mac-only; + label = "port5"; + status = "disabled"; + }; + + cpsw0_port6: port@6 { + reg = <6>; + ti,mac-only; + label = "port6"; + status = "disabled"; + }; + + cpsw0_port7: port@7 { + reg = <7>; + ti,mac-only; + label = "port7"; + status = "disabled"; + }; + + cpsw0_port8: port@8 { + reg = <8>; + ti,mac-only; + label = "port8"; + status = "disabled"; + }; + }; + + cpsw9g_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 19 89>; + clock-names = "fck"; + bus_freq = <1000000>; + status = "disabled"; + }; + + cpts@3d000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 19 16>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; + main_crypto: crypto@4e00000 { compatible = "ti,j721e-sa2ul"; reg = <0x0 0x4e00000 0x0 0x1200>; @@ -1180,7 +1296,6 @@ ti,itap-del-sel-mmc-hs = <0xa>; ti,itap-del-sel-ddr52 = <0x3>; ti,trm-icp = <0x8>; - ti,strobe-sel = <0x77>; dma-coherent; }; @@ -2329,4 +2444,92 @@ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 266 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 267 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 268 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 269 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 270 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 271 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 272 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 273 1>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 8ac78034d5d6..24e8125db8c4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -425,4 +425,37 @@ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; + + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 274 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 275 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 0>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 4640d280c85c..f650a7fd66b4 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -687,10 +687,6 @@ status = "disabled"; }; -&main_r5fss0_core0{ - firmware-name = "pdk-ipc/ipc_echo_test_mcu2_0_release_strip.xer5f"; -}; - &usb_serdes_mux { idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */ }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 6975cae644d9..b912143b6a11 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -7,9 +7,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J721E SoC"; compatible = "ti,j721e"; @@ -135,6 +136,7 @@ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x0c000000 0x00 0x0c000000 0x00 0x0d000000>, /* CPSW9G */ <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/ <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/ diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a7aa6cf08acd..b4b9edfe2d12 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -197,6 +197,32 @@ J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */ >; }; + + mcu_adc0_pins_default: mcu-adc0-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */ + J721S2_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */ + J721S2_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */ + J721S2_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */ + J721S2_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */ + J721S2_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */ + J721S2_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */ + J721S2_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */ + >; + }; + + mcu_adc1_pins_default: mcu-adc1-pins-default { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */ + J721S2_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */ + J721S2_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */ + J721S2_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */ + J721S2_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */ + J721S2_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */ + J721S2_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */ + J721S2_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */ + >; + }; }; &main_gpio2 { @@ -309,3 +335,21 @@ pinctrl-0 = <&mcu_mcan1_pins_default>; phys = <&transceiver2>; }; + +&tscadc0 { + pinctrl-0 = <&mcu_adc0_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + pinctrl-0 = <&mcu_adc1_pins_default>; + pinctrl-names = "default"; + status = "okay"; + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 8915132efcc1..2dd7865f7654 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -1014,4 +1014,92 @@ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>; status = "disabled"; }; + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 339 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 339 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 340 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 340 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 341 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 341 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 342 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 342 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 343 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 343 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 344 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 344 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 345 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 346 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 346 1>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 0af242aa9816..a353705a7463 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -203,6 +203,39 @@ status = "disabled"; }; + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 347 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 348 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 349 0>; + status = "disabled"; + }; + mcu_navss: bus@28380000{ compatible = "simple-mfd"; #address-cells = <2>; @@ -306,4 +339,44 @@ ti,cpts-periodic-outputs = <2>; }; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40210000 0x00 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 0>; + assigned-clocks = <&k3_clks 1 2>; + assigned-clock-rates = <60000000>; + clock-names = "fck"; + dmas = <&main_udmap 0x7402>, + <&main_udmap 0x7403>; + dma-names = "fifo0", "fifo1"; + status = "disabled"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 78295ee0fee5..376924726f1f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -10,9 +10,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J721S2 SoC"; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index 8cd4a7ecc121..f33815953e77 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -21,6 +21,7 @@ aliases { serial2 = &main_uart8; + mmc0 = &main_sdhci0; mmc1 = &main_sdhci1; i2c0 = &main_i2c0; }; @@ -140,6 +141,32 @@ }; }; +&wkup_pmx0 { + mcu_cpsw_pins_default: mcu-cpsw-pins-default { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */ + J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */ + J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */ + J784S4_WKUP_IOPAD(0x088, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */ + J784S4_WKUP_IOPAD(0x084, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */ + J784S4_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */ + J784S4_WKUP_IOPAD(0x07c, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */ + J784S4_WKUP_IOPAD(0x078, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */ + J784S4_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */ + J784S4_WKUP_IOPAD(0x070, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */ + J784S4_WKUP_IOPAD(0x080, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */ + J784S4_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-pins-default { + pinctrl-single,pins = < + J784S4_WKUP_IOPAD(0x09c, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */ + J784S4_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */ + >; + }; +}; + &main_uart8 { status = "okay"; pinctrl-names = "default"; @@ -181,6 +208,14 @@ }; }; +&main_sdhci0 { + /* eMMC */ + status = "okay"; + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + &main_sdhci1 { /* SD card */ status = "okay"; @@ -194,3 +229,27 @@ &main_gpio0 { status = "okay"; }; + +&mcu_cpsw { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mdio_pins_default>; + + mcu_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&mcu_cpsw_port1 { + status = "okay"; + phy-mode = "rgmii-rxid"; + phy-handle = <&mcu_phy0>; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index 7edf324ac159..e9169eb358c1 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -72,6 +72,25 @@ pinctrl-single,function-mask = <0xffffffff>; }; + main_crypto: crypto@4e00000 { + compatible = "ti,j721e-sa2ul"; + reg = <0x00 0x4e00000 0x00 0x1200>; + power-domains = <&k3_pds 369 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>; + + dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>, + <&main_udmap 0x4a41>; + dma-names = "tx", "rx1", "rx2"; + + rng: rng@4e10000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0x00 0x4e10000 0x00 0x7d>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x200>; @@ -398,6 +417,7 @@ #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; + ti,sci-dev-id = <280>; dma-coherent; dma-ranges; @@ -1004,4 +1024,92 @@ bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>; status = "disabled"; }; + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02100000 0x00 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 376 1>; + status = "disabled"; + }; + + main_spi1: spi@2110000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02110000 0x00 0x400>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 377 1>; + status = "disabled"; + }; + + main_spi2: spi@2120000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02120000 0x00 0x400>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 378 1>; + status = "disabled"; + }; + + main_spi3: spi@2130000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02130000 0x00 0x400>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 379 1>; + status = "disabled"; + }; + + main_spi4: spi@2140000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02140000 0x00 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 380 1>; + status = "disabled"; + }; + + main_spi5: spi@2150000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02150000 0x00 0x400>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 381 1>; + status = "disabled"; + }; + + main_spi6: spi@2160000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02160000 0x00 0x400>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 382 1>; + status = "disabled"; + }; + + main_spi7: spi@2170000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x00 0x02170000 0x00 0x400>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 383 1>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index 93952af618f6..f04fcb614cbe 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -204,11 +204,45 @@ status = "disabled"; }; + mcu_spi0: spi@40300000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040300000 0x00 0x400>; + interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 384 0>; + status = "disabled"; + }; + + mcu_spi1: spi@40310000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040310000 0x00 0x400>; + interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 385 0>; + status = "disabled"; + }; + + mcu_spi2: spi@40320000 { + compatible = "ti,am654-mcspi", "ti,omap4-mcspi"; + reg = <0x00 0x040320000 0x00 0x400>; + interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 386 0>; + status = "disabled"; + }; + mcu_navss: bus@28380000{ compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; + ti,sci-dev-id = <323>; dma-coherent; dma-ranges; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi index 3eb0d0568959..2e03d84da7d2 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi @@ -10,9 +10,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/k3.h> #include <dt-bindings/soc/ti,sci_pm_domain.h> +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 J784S4 SoC"; compatible = "ti,j784s4"; diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h new file mode 100644 index 000000000000..c97548a3f42d --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for pinctrl bindings for TI's K3 SoC + * family. + * + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ +#ifndef DTS_ARM64_TI_K3_PINCTRL_H +#define DTS_ARM64_TI_K3_PINCTRL_H + +#define PULLUDEN_SHIFT (16) +#define PULLTYPESEL_SHIFT (17) +#define RXACTIVE_SHIFT (18) + +#define PULL_DISABLE (1 << PULLUDEN_SHIFT) +#define PULL_ENABLE (0 << PULLUDEN_SHIFT) + +#define PULL_UP (1 << PULLTYPESEL_SHIFT | PULL_ENABLE) +#define PULL_DOWN (0 << PULLTYPESEL_SHIFT | PULL_ENABLE) + +#define INPUT_EN (1 << RXACTIVE_SHIFT) +#define INPUT_DISABLE (0 << RXACTIVE_SHIFT) + +/* Only these macros are expected be used directly in device tree files */ +#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE) +#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP) +#define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN) +#define PIN_INPUT (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) + +#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM64X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM64X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J721S2_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J721S2_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J784S4_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J784S4_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#endif diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi index 0fc32c036f30..b04829b3175d 100644 --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi @@ -485,7 +485,7 @@ <0x0 0x28050000 0x0 0x00010000>, <0x0 0x24200000 0x0 0x00002000>, <0x0 0x24162000 0x0 0x00001000>; - reg-names = "dbi", "config", "ulreg", "smu", "mpu"; + reg-names = "dbi", "config", "ulreg", "smu", "mpu"; device_type = "pci"; bus-range = <0x00 0xff>; num-lanes = <2>; diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts index a0769185be97..4ed33c1e7c9c 100644 --- a/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts +++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts @@ -1,6 +1,25 @@ // SPDX-License-Identifier: (GPL-2.0+ or MIT) // Copyright (C) 2021-2022 Samuel Holland <samuel@sholland.org> +/* + * gpio line names + * + * The Nezha-D1 has a 40-pin IO header. Some of these pins are routed + * directly to pads on the SoC, others come from an 8-bit pcf857x IO + * expander. Therefore, these line names are specified in two places: + * one set for the pcf857x, and one set for the pio controller. + * + * Lines which are routed to the 40-pin header are named as follows: + * <pin#> [<pin name>] + * where: + * <pin#> is the actual pin number of the 40-pin header + * <pin name> is the name of the pin by function/gpio# + * + * For details regarding pin numbers and names see the schematics (under + * "IO EXPAND"): + * http://dl.linux-sunxi.org/D1/D1_Nezha_development_board_schematic_diagram_20210224.pdf + */ + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -90,6 +109,15 @@ gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + gpio-line-names = + "pin13 [gpio8]", + "pin16 [gpio10]", + "pin18 [gpio11]", + "pin26 [gpio17]", + "pin22 [gpio14]", + "pin28 [gpio19]", + "pin37 [gpio23]", + "pin11 [gpio6]"; }; }; @@ -164,3 +192,47 @@ usb1_vbus-supply = <®_vcc>; status = "okay"; }; + +&pio { + gpio-line-names = + /* Port A */ + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* Port B */ + "pin5 [gpio2/twi2-sck]", + "pin3 [gpio1/twi2-sda]", + "", + "pin38 [gpio24/i2s2-din]", + "pin40 [gpio25/i2s2-dout]", + "pin12 [gpio7/i2s-clk]", + "pin35 [gpio22/i2s2-lrck]", + "", + "pin8 [gpio4/uart0-txd]", + "pin10 [gpio5/uart0-rxd]", + "", + "", + "pin15 [gpio9]", + "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* Port C */ + "", + "pin31 [gpio21]", + "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + /* Port D */ + "", "", "", "", "", "", "", "", + "", "", + "pin24 [gpio16/spi1-ce0]", + "pin23 [gpio15/spi1-clk]", + "pin19 [gpio12/spi1-mosi]", + "pin21 [gpio13/spi1-miso]", + "pin27 [gpio18/spi1-hold]", + "pin29 [gpio20/spi1-wp]", + "", "", "", "", "", "", + "pin7 [gpio3/pwm]"; +}; diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index 6fadcee7800f..922e8e0e2c09 100644 --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi @@ -211,7 +211,7 @@ clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; dmas = <&dma 14>, <&dma 14>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -224,7 +224,7 @@ clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; dmas = <&dma 15>, <&dma 15>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -237,7 +237,7 @@ clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; dmas = <&dma 16>, <&dma 16>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -250,7 +250,7 @@ clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; dmas = <&dma 17>, <&dma 17>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -263,7 +263,7 @@ clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; dmas = <&dma 18>, <&dma 18>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -276,7 +276,7 @@ clocks = <&ccu CLK_BUS_UART5>; resets = <&ccu RST_BUS_UART5>; dmas = <&dma 19>, <&dma 19>; - dma-names = "rx", "tx"; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -367,6 +367,18 @@ #size-cells = <1>; }; + crypto: crypto@3040000 { + compatible = "allwinner,sun20i-d1-crypto"; + reg = <0x3040000 0x800>; + interrupts = <SOC_PERIPHERAL_IRQ(52) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, + <&ccu CLK_CE>, + <&ccu CLK_MBUS_CE>, + <&rtc CLK_IOSC>; + clock-names = "bus", "mod", "ram", "trng"; + resets = <&ccu RST_BUS_CE>; + }; + mbus: dram-controller@3102000 { compatible = "allwinner,sun20i-d1-mbus"; reg = <0x3102000 0x1000>, diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 0a9bb84af438..104504352e99 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -234,6 +234,7 @@ reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; clocks = <&refclk>; #clock-cells = <1>; + #reset-cells = <1>; }; ccc_se: clock-controller@38010000 { @@ -415,7 +416,7 @@ }; mac0: ethernet@20110000 { - compatible = "cdns,macb"; + compatible = "microchip,mpfs-macb", "cdns,macb"; reg = <0x0 0x20110000 0x0 0x2000>; #address-cells = <1>; #size-cells = <0>; @@ -424,11 +425,12 @@ local-mac-address = [00 00 00 00 00 00]; clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; clock-names = "pclk", "hclk"; + resets = <&clkcfg CLK_MAC0>; status = "disabled"; }; mac1: ethernet@20112000 { - compatible = "cdns,macb"; + compatible = "microchip,mpfs-macb", "cdns,macb"; reg = <0x0 0x20112000 0x0 0x2000>; #address-cells = <1>; #size-cells = <0>; @@ -437,6 +439,7 @@ local-mac-address = [00 00 00 00 00 00]; clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; clock-names = "pclk", "hclk"; + resets = <&clkcfg CLK_MAC1>; status = "disabled"; }; @@ -498,7 +501,8 @@ mbox: mailbox@37020000 { compatible = "microchip,mpfs-mailbox"; - reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>, + <0x0 0x37020800 0x0 0x100>; interrupt-parent = <&plic>; interrupts = <96>; #mbox-cells = <1>; diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 7b00a48580ca..170956846d49 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -1,2 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb + +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h new file mode 100644 index 000000000000..fb0139b56723 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/* + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + * Copyright (C) 2022 StarFive Technology Co., Ltd. + */ + +#ifndef __JH7110_PINFUNC_H__ +#define __JH7110_PINFUNC_H__ + +/* + * mux bits: + * | 31 - 24 | 23 - 16 | 15 - 10 | 9 - 8 | 7 - 0 | + * | din | dout | doen | function | gpio nr | + * + * dout: output signal + * doen: output enable signal + * din: optional input signal, 0xff = none + * function: function selector + * gpio nr: gpio number, 0 - 63 + */ +#define GPIOMUX(n, dout, doen, din) ( \ + (((din) & 0xff) << 24) | \ + (((dout) & 0xff) << 16) | \ + (((doen) & 0x3f) << 10) | \ + ((n) & 0x3f)) + +#define PINMUX(n, func) ((1 << 10) | (((func) & 0x3) << 8) | ((n) & 0xff)) + +/* sys_iomux dout */ +#define GPOUT_LOW 0 +#define GPOUT_HIGH 1 +#define GPOUT_SYS_WAVE511_UART_TX 2 +#define GPOUT_SYS_CAN0_STBY 3 +#define GPOUT_SYS_CAN0_TST_NEXT_BIT 4 +#define GPOUT_SYS_CAN0_TST_SAMPLE_POINT 5 +#define GPOUT_SYS_CAN0_TXD 6 +#define GPOUT_SYS_USB_DRIVE_VBUS 7 +#define GPOUT_SYS_QSPI_CS1 8 +#define GPOUT_SYS_SPDIF 9 +#define GPOUT_SYS_HDMI_CEC_SDA 10 +#define GPOUT_SYS_HDMI_DDC_SCL 11 +#define GPOUT_SYS_HDMI_DDC_SDA 12 +#define GPOUT_SYS_WATCHDOG 13 +#define GPOUT_SYS_I2C0_CLK 14 +#define GPOUT_SYS_I2C0_DATA 15 +#define GPOUT_SYS_SDIO0_BACK_END_POWER 16 +#define GPOUT_SYS_SDIO0_CARD_POWER_EN 17 +#define GPOUT_SYS_SDIO0_CCMD_OD_PULLUP_EN 18 +#define GPOUT_SYS_SDIO0_RST 19 +#define GPOUT_SYS_UART0_TX 20 +#define GPOUT_SYS_HIFI4_JTAG_TDO 21 +#define GPOUT_SYS_JTAG_TDO 22 +#define GPOUT_SYS_PDM_MCLK 23 +#define GPOUT_SYS_PWM_CHANNEL0 24 +#define GPOUT_SYS_PWM_CHANNEL1 25 +#define GPOUT_SYS_PWM_CHANNEL2 26 +#define GPOUT_SYS_PWM_CHANNEL3 27 +#define GPOUT_SYS_PWMDAC_LEFT 28 +#define GPOUT_SYS_PWMDAC_RIGHT 29 +#define GPOUT_SYS_SPI0_CLK 30 +#define GPOUT_SYS_SPI0_FSS 31 +#define GPOUT_SYS_SPI0_TXD 32 +#define GPOUT_SYS_GMAC_PHYCLK 33 +#define GPOUT_SYS_I2SRX_BCLK 34 +#define GPOUT_SYS_I2SRX_LRCK 35 +#define GPOUT_SYS_I2STX0_BCLK 36 +#define GPOUT_SYS_I2STX0_LRCK 37 +#define GPOUT_SYS_MCLK 38 +#define GPOUT_SYS_TDM_CLK 39 +#define GPOUT_SYS_TDM_SYNC 40 +#define GPOUT_SYS_TDM_TXD 41 +#define GPOUT_SYS_TRACE_DATA0 42 +#define GPOUT_SYS_TRACE_DATA1 43 +#define GPOUT_SYS_TRACE_DATA2 44 +#define GPOUT_SYS_TRACE_DATA3 45 +#define GPOUT_SYS_TRACE_REF 46 +#define GPOUT_SYS_CAN1_STBY 47 +#define GPOUT_SYS_CAN1_TST_NEXT_BIT 48 +#define GPOUT_SYS_CAN1_TST_SAMPLE_POINT 49 +#define GPOUT_SYS_CAN1_TXD 50 +#define GPOUT_SYS_I2C1_CLK 51 +#define GPOUT_SYS_I2C1_DATA 52 +#define GPOUT_SYS_SDIO1_BACK_END_POWER 53 +#define GPOUT_SYS_SDIO1_CARD_POWER_EN 54 +#define GPOUT_SYS_SDIO1_CLK 55 +#define GPOUT_SYS_SDIO1_CMD_OD_PULLUP_EN 56 +#define GPOUT_SYS_SDIO1_CMD 57 +#define GPOUT_SYS_SDIO1_DATA0 58 +#define GPOUT_SYS_SDIO1_DATA1 59 +#define GPOUT_SYS_SDIO1_DATA2 60 +#define GPOUT_SYS_SDIO1_DATA3 61 +#define GPOUT_SYS_SDIO1_DATA4 63 +#define GPOUT_SYS_SDIO1_DATA5 63 +#define GPOUT_SYS_SDIO1_DATA6 64 +#define GPOUT_SYS_SDIO1_DATA7 65 +#define GPOUT_SYS_SDIO1_RST 66 +#define GPOUT_SYS_UART1_RTS 67 +#define GPOUT_SYS_UART1_TX 68 +#define GPOUT_SYS_I2STX1_SDO0 69 +#define GPOUT_SYS_I2STX1_SDO1 70 +#define GPOUT_SYS_I2STX1_SDO2 71 +#define GPOUT_SYS_I2STX1_SDO3 72 +#define GPOUT_SYS_SPI1_CLK 73 +#define GPOUT_SYS_SPI1_FSS 74 +#define GPOUT_SYS_SPI1_TXD 75 +#define GPOUT_SYS_I2C2_CLK 76 +#define GPOUT_SYS_I2C2_DATA 77 +#define GPOUT_SYS_UART2_RTS 78 +#define GPOUT_SYS_UART2_TX 79 +#define GPOUT_SYS_SPI2_CLK 80 +#define GPOUT_SYS_SPI2_FSS 81 +#define GPOUT_SYS_SPI2_TXD 82 +#define GPOUT_SYS_I2C3_CLK 83 +#define GPOUT_SYS_I2C3_DATA 84 +#define GPOUT_SYS_UART3_TX 85 +#define GPOUT_SYS_SPI3_CLK 86 +#define GPOUT_SYS_SPI3_FSS 87 +#define GPOUT_SYS_SPI3_TXD 88 +#define GPOUT_SYS_I2C4_CLK 89 +#define GPOUT_SYS_I2C4_DATA 90 +#define GPOUT_SYS_UART4_RTS 91 +#define GPOUT_SYS_UART4_TX 92 +#define GPOUT_SYS_SPI4_CLK 93 +#define GPOUT_SYS_SPI4_FSS 94 +#define GPOUT_SYS_SPI4_TXD 95 +#define GPOUT_SYS_I2C5_CLK 96 +#define GPOUT_SYS_I2C5_DATA 97 +#define GPOUT_SYS_UART5_RTS 98 +#define GPOUT_SYS_UART5_TX 99 +#define GPOUT_SYS_SPI5_CLK 100 +#define GPOUT_SYS_SPI5_FSS 101 +#define GPOUT_SYS_SPI5_TXD 102 +#define GPOUT_SYS_I2C6_CLK 103 +#define GPOUT_SYS_I2C6_DATA 104 +#define GPOUT_SYS_SPI6_CLK 105 +#define GPOUT_SYS_SPI6_FSS 106 +#define GPOUT_SYS_SPI6_TXD 107 + +/* aon_iomux dout */ +#define GPOUT_AON_CLK_32K_OUT 2 +#define GPOUT_AON_PTC0_PWM4 3 +#define GPOUT_AON_PTC0_PWM5 4 +#define GPOUT_AON_PTC0_PWM6 5 +#define GPOUT_AON_PTC0_PWM7 6 +#define GPOUT_AON_CLK_GCLK0 7 +#define GPOUT_AON_CLK_GCLK1 8 +#define GPOUT_AON_CLK_GCLK2 9 + +/* sys_iomux doen */ +#define GPOEN_ENABLE 0 +#define GPOEN_DISABLE 1 +#define GPOEN_SYS_HDMI_CEC_SDA 2 +#define GPOEN_SYS_HDMI_DDC_SCL 3 +#define GPOEN_SYS_HDMI_DDC_SDA 4 +#define GPOEN_SYS_I2C0_CLK 5 +#define GPOEN_SYS_I2C0_DATA 6 +#define GPOEN_SYS_HIFI4_JTAG_TDO 7 +#define GPOEN_SYS_JTAG_TDO 8 +#define GPOEN_SYS_PWM0_CHANNEL0 9 +#define GPOEN_SYS_PWM0_CHANNEL1 10 +#define GPOEN_SYS_PWM0_CHANNEL2 11 +#define GPOEN_SYS_PWM0_CHANNEL3 12 +#define GPOEN_SYS_SPI0_NSSPCTL 13 +#define GPOEN_SYS_SPI0_NSSP 14 +#define GPOEN_SYS_TDM_SYNC 15 +#define GPOEN_SYS_TDM_TXD 16 +#define GPOEN_SYS_I2C1_CLK 17 +#define GPOEN_SYS_I2C1_DATA 18 +#define GPOEN_SYS_SDIO1_CMD 19 +#define GPOEN_SYS_SDIO1_DATA0 20 +#define GPOEN_SYS_SDIO1_DATA1 21 +#define GPOEN_SYS_SDIO1_DATA2 22 +#define GPOEN_SYS_SDIO1_DATA3 23 +#define GPOEN_SYS_SDIO1_DATA4 24 +#define GPOEN_SYS_SDIO1_DATA5 25 +#define GPOEN_SYS_SDIO1_DATA6 26 +#define GPOEN_SYS_SDIO1_DATA7 27 +#define GPOEN_SYS_SPI1_NSSPCTL 28 +#define GPOEN_SYS_SPI1_NSSP 29 +#define GPOEN_SYS_I2C2_CLK 30 +#define GPOEN_SYS_I2C2_DATA 31 +#define GPOEN_SYS_SPI2_NSSPCTL 32 +#define GPOEN_SYS_SPI2_NSSP 33 +#define GPOEN_SYS_I2C3_CLK 34 +#define GPOEN_SYS_I2C3_DATA 35 +#define GPOEN_SYS_SPI3_NSSPCTL 36 +#define GPOEN_SYS_SPI3_NSSP 37 +#define GPOEN_SYS_I2C4_CLK 38 +#define GPOEN_SYS_I2C4_DATA 39 +#define GPOEN_SYS_SPI4_NSSPCTL 40 +#define GPOEN_SYS_SPI4_NSSP 41 +#define GPOEN_SYS_I2C5_CLK 42 +#define GPOEN_SYS_I2C5_DATA 43 +#define GPOEN_SYS_SPI5_NSSPCTL 44 +#define GPOEN_SYS_SPI5_NSSP 45 +#define GPOEN_SYS_I2C6_CLK 46 +#define GPOEN_SYS_I2C6_DATA 47 +#define GPOEN_SYS_SPI6_NSSPCTL 48 +#define GPOEN_SYS_SPI6_NSSP 49 + +/* aon_iomux doen */ +#define GPOEN_AON_PTC0_OE_N_4 2 +#define GPOEN_AON_PTC0_OE_N_5 3 +#define GPOEN_AON_PTC0_OE_N_6 4 +#define GPOEN_AON_PTC0_OE_N_7 5 + +/* sys_iomux gin */ +#define GPI_NONE 255 + +#define GPI_SYS_WAVE511_UART_RX 0 +#define GPI_SYS_CAN0_RXD 1 +#define GPI_SYS_USB_OVERCURRENT 2 +#define GPI_SYS_SPDIF 3 +#define GPI_SYS_JTAG_RST 4 +#define GPI_SYS_HDMI_CEC_SDA 5 +#define GPI_SYS_HDMI_DDC_SCL 6 +#define GPI_SYS_HDMI_DDC_SDA 7 +#define GPI_SYS_HDMI_HPD 8 +#define GPI_SYS_I2C0_CLK 9 +#define GPI_SYS_I2C0_DATA 10 +#define GPI_SYS_SDIO0_CD 11 +#define GPI_SYS_SDIO0_INT 12 +#define GPI_SYS_SDIO0_WP 13 +#define GPI_SYS_UART0_RX 14 +#define GPI_SYS_HIFI4_JTAG_TCK 15 +#define GPI_SYS_HIFI4_JTAG_TDI 16 +#define GPI_SYS_HIFI4_JTAG_TMS 17 +#define GPI_SYS_HIFI4_JTAG_RST 18 +#define GPI_SYS_JTAG_TDI 19 +#define GPI_SYS_JTAG_TMS 20 +#define GPI_SYS_PDM_DMIC0 21 +#define GPI_SYS_PDM_DMIC1 22 +#define GPI_SYS_I2SRX_SDIN0 23 +#define GPI_SYS_I2SRX_SDIN1 24 +#define GPI_SYS_I2SRX_SDIN2 25 +#define GPI_SYS_SPI0_CLK 26 +#define GPI_SYS_SPI0_FSS 27 +#define GPI_SYS_SPI0_RXD 28 +#define GPI_SYS_JTAG_TCK 29 +#define GPI_SYS_MCLK_EXT 30 +#define GPI_SYS_I2SRX_BCLK 31 +#define GPI_SYS_I2SRX_LRCK 32 +#define GPI_SYS_I2STX0_BCLK 33 +#define GPI_SYS_I2STX0_LRCK 34 +#define GPI_SYS_TDM_CLK 35 +#define GPI_SYS_TDM_RXD 36 +#define GPI_SYS_TDM_SYNC 37 +#define GPI_SYS_CAN1_RXD 38 +#define GPI_SYS_I2C1_CLK 39 +#define GPI_SYS_I2C1_DATA 40 +#define GPI_SYS_SDIO1_CD 41 +#define GPI_SYS_SDIO1_INT 42 +#define GPI_SYS_SDIO1_WP 43 +#define GPI_SYS_SDIO1_CMD 44 +#define GPI_SYS_SDIO1_DATA0 45 +#define GPI_SYS_SDIO1_DATA1 46 +#define GPI_SYS_SDIO1_DATA2 47 +#define GPI_SYS_SDIO1_DATA3 48 +#define GPI_SYS_SDIO1_DATA4 49 +#define GPI_SYS_SDIO1_DATA5 50 +#define GPI_SYS_SDIO1_DATA6 51 +#define GPI_SYS_SDIO1_DATA7 52 +#define GPI_SYS_SDIO1_STRB 53 +#define GPI_SYS_UART1_CTS 54 +#define GPI_SYS_UART1_RX 55 +#define GPI_SYS_SPI1_CLK 56 +#define GPI_SYS_SPI1_FSS 57 +#define GPI_SYS_SPI1_RXD 58 +#define GPI_SYS_I2C2_CLK 59 +#define GPI_SYS_I2C2_DATA 60 +#define GPI_SYS_UART2_CTS 61 +#define GPI_SYS_UART2_RX 62 +#define GPI_SYS_SPI2_CLK 63 +#define GPI_SYS_SPI2_FSS 64 +#define GPI_SYS_SPI2_RXD 65 +#define GPI_SYS_I2C3_CLK 66 +#define GPI_SYS_I2C3_DATA 67 +#define GPI_SYS_UART3_RX 68 +#define GPI_SYS_SPI3_CLK 69 +#define GPI_SYS_SPI3_FSS 70 +#define GPI_SYS_SPI3_RXD 71 +#define GPI_SYS_I2C4_CLK 72 +#define GPI_SYS_I2C4_DATA 73 +#define GPI_SYS_UART4_CTS 74 +#define GPI_SYS_UART4_RX 75 +#define GPI_SYS_SPI4_CLK 76 +#define GPI_SYS_SPI4_FSS 77 +#define GPI_SYS_SPI4_RXD 78 +#define GPI_SYS_I2C5_CLK 79 +#define GPI_SYS_I2C5_DATA 80 +#define GPI_SYS_UART5_CTS 81 +#define GPI_SYS_UART5_RX 82 +#define GPI_SYS_SPI5_CLK 83 +#define GPI_SYS_SPI5_FSS 84 +#define GPI_SYS_SPI5_RXD 85 +#define GPI_SYS_I2C6_CLK 86 +#define GPI_SYS_I2C6_DATA 87 +#define GPI_SYS_SPI6_CLK 88 +#define GPI_SYS_SPI6_FSS 89 +#define GPI_SYS_SPI6_RXD 90 + +/* aon_iomux gin */ +#define GPI_AON_PMU_GPIO_WAKEUP_0 0 +#define GPI_AON_PMU_GPIO_WAKEUP_1 1 +#define GPI_AON_PMU_GPIO_WAKEUP_2 2 +#define GPI_AON_PMU_GPIO_WAKEUP_3 3 + +#endif diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts new file mode 100644 index 000000000000..4af3300f3cf3 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.2A"; + compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts new file mode 100644 index 000000000000..9230cc3d8946 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110-starfive-visionfive-2.dtsi" + +/ { + model = "StarFive VisionFive 2 v1.3B"; + compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi new file mode 100644 index 000000000000..2a6d81609284 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110.dtsi" +#include "jh7110-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c5 = &i2c5; + i2c6 = &i2c6; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + timebase-frequency = <4000000>; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x1 0x0>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; + priority = <224>; + }; +}; + +&gmac0_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac0_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac1_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac1_rmii_refin { + clock-frequency = <50000000>; +}; + +&i2srx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2srx_lrck_ext { + clock-frequency = <192000>; +}; + +&i2stx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2stx_lrck_ext { + clock-frequency = <192000>; +}; + +&mclk_ext { + clock-frequency = <12288000>; +}; + +&osc { + clock-frequency = <24000000>; +}; + +&rtc_osc { + clock-frequency = <32768>; +}; + +&tdm_ext { + clock-frequency = <49152000>; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; +}; + +&sysgpio { + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(57, GPOUT_LOW, + GPOEN_SYS_I2C0_CLK, + GPI_SYS_I2C0_CLK)>, + <GPIOMUX(58, GPOUT_LOW, + GPOEN_SYS_I2C0_DATA, + GPI_SYS_I2C0_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(3, GPOUT_LOW, + GPOEN_SYS_I2C2_CLK, + GPI_SYS_I2C2_CLK)>, + <GPIOMUX(2, GPOUT_LOW, + GPOEN_SYS_I2C2_DATA, + GPI_SYS_I2C2_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c5_pins: i2c5-0 { + i2c-pins { + pinmux = <GPIOMUX(19, GPOUT_LOW, + GPOEN_SYS_I2C5_CLK, + GPI_SYS_I2C5_CLK)>, + <GPIOMUX(20, GPOUT_LOW, + GPOEN_SYS_I2C5_DATA, + GPI_SYS_I2C5_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c6_pins: i2c6-0 { + i2c-pins { + pinmux = <GPIOMUX(16, GPOUT_LOW, + GPOEN_SYS_I2C6_CLK, + GPI_SYS_I2C6_CLK)>, + <GPIOMUX(17, GPOUT_LOW, + GPOEN_SYS_I2C6_DATA, + GPI_SYS_I2C6_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi new file mode 100644 index 000000000000..4c5fdb905da8 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -0,0 +1,500 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include <dt-bindings/clock/starfive,jh7110-crg.h> +#include <dt-bindings/reset/starfive,jh7110-crg.h> + +/ { + compatible = "starfive,jh7110"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + S7_0: cpu@0 { + compatible = "sifive,s7", "riscv"; + reg = <0>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <16384>; + next-level-cache = <&ccache>; + riscv,isa = "rv64imac_zba_zbb"; + status = "disabled"; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_1: cpu@1 { + compatible = "sifive,u74-mc", "riscv"; + reg = <1>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu1_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_2: cpu@2 { + compatible = "sifive,u74-mc", "riscv"; + reg = <2>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu2_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_3: cpu@3 { + compatible = "sifive,u74-mc", "riscv"; + reg = <3>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu3_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + U74_4: cpu@4 { + compatible = "sifive,u74-mc", "riscv"; + reg = <4>; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <40>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <40>; + mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; + riscv,isa = "rv64imafdc_zba_zbb"; + tlb-split; + + cpu4_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&S7_0>; + }; + + core1 { + cpu = <&U74_1>; + }; + + core2 { + cpu = <&U74_2>; + }; + + core3 { + cpu = <&U74_3>; + }; + + core4 { + cpu = <&U74_4>; + }; + }; + }; + }; + + gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac0_rgmii_rxin"; + #clock-cells = <0>; + }; + + gmac0_rmii_refin: gmac0-rmii-refin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac0_rmii_refin"; + #clock-cells = <0>; + }; + + gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac1_rgmii_rxin"; + #clock-cells = <0>; + }; + + gmac1_rmii_refin: gmac1-rmii-refin-clock { + compatible = "fixed-clock"; + clock-output-names = "gmac1_rmii_refin"; + #clock-cells = <0>; + }; + + i2srx_bclk_ext: i2srx-bclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2srx_bclk_ext"; + #clock-cells = <0>; + }; + + i2srx_lrck_ext: i2srx-lrck-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2srx_lrck_ext"; + #clock-cells = <0>; + }; + + i2stx_bclk_ext: i2stx-bclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2stx_bclk_ext"; + #clock-cells = <0>; + }; + + i2stx_lrck_ext: i2stx-lrck-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "i2stx_lrck_ext"; + #clock-cells = <0>; + }; + + mclk_ext: mclk-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "mclk_ext"; + #clock-cells = <0>; + }; + + osc: oscillator { + compatible = "fixed-clock"; + clock-output-names = "osc"; + #clock-cells = <0>; + }; + + rtc_osc: rtc-oscillator { + compatible = "fixed-clock"; + clock-output-names = "rtc_osc"; + #clock-cells = <0>; + }; + + tdm_ext: tdm-ext-clock { + compatible = "fixed-clock"; + clock-output-names = "tdm_ext"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clint: timer@2000000 { + compatible = "starfive,jh7110-clint", "sifive,clint0"; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>, + <&cpu2_intc 3>, <&cpu2_intc 7>, + <&cpu3_intc 3>, <&cpu3_intc 7>, + <&cpu4_intc 3>, <&cpu4_intc 7>; + }; + + ccache: cache-controller@2010000 { + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; + reg = <0x0 0x2010000 0x0 0x4000>; + interrupts = <1>, <3>, <4>, <2>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <2048>; + cache-size = <2097152>; + cache-unified; + }; + + plic: interrupt-controller@c000000 { + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; + reg = <0x0 0xc000000 0x0 0x4000000>; + interrupts-extended = <&cpu0_intc 11>, + <&cpu1_intc 11>, <&cpu1_intc 9>, + <&cpu2_intc 11>, <&cpu2_intc 9>, + <&cpu3_intc 11>, <&cpu3_intc 9>, + <&cpu4_intc 11>, <&cpu4_intc 9>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <0>; + riscv,ndev = <136>; + }; + + uart0: serial@10000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10000000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, + <&syscrg JH7110_SYSCLK_UART0_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART0_APB>; + interrupts = <32>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@10010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, + <&syscrg JH7110_SYSCLK_UART1_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART1_APB>; + interrupts = <33>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@10020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x10020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, + <&syscrg JH7110_SYSCLK_UART2_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART2_APB>; + interrupts = <34>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c0: i2c@10030000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10030000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C0_APB>; + interrupts = <35>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@10040000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C1_APB>; + interrupts = <36>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@10050000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x10050000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C2_APB>; + interrupts = <37>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@12000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12000000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, + <&syscrg JH7110_SYSCLK_UART3_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART3_APB>; + interrupts = <45>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart4: serial@12010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, + <&syscrg JH7110_SYSCLK_UART4_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART4_APB>; + interrupts = <46>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart5: serial@12020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x12020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, + <&syscrg JH7110_SYSCLK_UART5_APB>; + clock-names = "baudclk", "apb_pclk"; + resets = <&syscrg JH7110_SYSRST_UART5_APB>; + interrupts = <47>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c3: i2c@12030000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12030000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C3_APB>; + interrupts = <48>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@12040000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C4_APB>; + interrupts = <49>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@12050000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12050000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C5_APB>; + interrupts = <50>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@12060000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x12060000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>; + clock-names = "ref"; + resets = <&syscrg JH7110_SYSRST_I2C6_APB>; + interrupts = <51>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + syscrg: clock-controller@13020000 { + compatible = "starfive,jh7110-syscrg"; + reg = <0x0 0x13020000 0x0 0x10000>; + clocks = <&osc>, <&gmac1_rmii_refin>, + <&gmac1_rgmii_rxin>, + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, + <&tdm_ext>, <&mclk_ext>; + clock-names = "osc", "gmac1_rmii_refin", + "gmac1_rgmii_rxin", + "i2stx_bclk_ext", "i2stx_lrck_ext", + "i2srx_bclk_ext", "i2srx_lrck_ext", + "tdm_ext", "mclk_ext"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sysgpio: pinctrl@13040000 { + compatible = "starfive,jh7110-sys-pinctrl"; + reg = <0x0 0x13040000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>; + resets = <&syscrg JH7110_SYSRST_IOMUX_APB>; + interrupts = <86>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + + aoncrg: clock-controller@17000000 { + compatible = "starfive,jh7110-aoncrg"; + reg = <0x0 0x17000000 0x0 0x10000>; + clocks = <&osc>, <&gmac0_rmii_refin>, + <&gmac0_rgmii_rxin>, + <&syscrg JH7110_SYSCLK_STG_AXIAHB>, + <&syscrg JH7110_SYSCLK_APB_BUS>, + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>, + <&rtc_osc>; + clock-names = "osc", "gmac0_rmii_refin", + "gmac0_rgmii_rxin", "stg_axiahb", + "apb_bus", "gmac0_gtxclk", + "rtc_osc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + aongpio: pinctrl@17020000 { + compatible = "starfive,jh7110-aon-pinctrl"; + reg = <0x0 0x17020000 0x0 0x10000>; + resets = <&aoncrg JH7110_AONRST_IOMUX>; + interrupts = <85>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; |