Merge tag 'mvebu-dt-3.19-2' of git://git.infradead.org/linux-mvebu into next/dt

Pull "mvebu DT changes for v3.19 (round 2)" from Jason Cooper:

 - mvebu
    - Use simple-card audio on Armada 370 DB
    - Add DSA node for Armada 370 DB
    - Add SDHCI to Armada 38x
    - Armada 370/XP rework to support new Synology boards
    - Add Synology DS213j and DS414
    - Various pinctrl and uart and alias fixes to help bootloaders

* tag 'mvebu-dt-3.19-2' of git://git.infradead.org/linux-mvebu:
  arm: mvebu: normalize pinctrl entries for Armada SoCs
  arm: mvebu: fix wrongly named DS414 pinctrl entries
  arm: mvebu: add .dts file for Synology DS414
  arm: mvebu: add .dts file for Synology DS213j
  arm: mvebu: define and use common Armada XP SPI pinctrl setting
  arm: mvebu: define and use common Armada XP UART2/3 pinctrl settings
  arm: mvebu: define and use common Armada 370 UART pinctrl settings
  arm: mvebu: define and use common Armada 370 SPI pinctrl settings
  arm: mvebu: move Armada 370/XP pinctrl node definition armada-370-xp.dtsi
  arm: mvebu: use recently introduced uart label for stdout-path
  arm: mvebu: add uartX labels for Armada SoC serial nodes
  arm: mvebu: fix vendor prefix typo in kirkwood-synology.dtsi
  ARM: mvebu: fix ordering in Armada 370 .dtsi
  ARM: mvebu: adjust ethernet aliases according to U-Boot requirements for A38x
  ARM: mvebu: remove clock-frequency from Armada 38x SDHCI Device Tree node
  ARM: mvebu: enable no-1-8-v flag for Armada 385 DB SDHCI interface
  mvebu: 370 RD: Add support for the switch
  ARM: mvebu: use simple-card DT binding for audio on Armada 370 DB
  ARM: mvebu: remove conflicting muxing on Armada 370 DB

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

16 files changed, 1077 insertions, 264 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cd24e2bc3f5d..35f3e122f3a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -521,7 +521,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 	armada-370-mirabox.dtb \
 	armada-370-netgear-rn102.dtb \
 	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb
+	armada-370-rd.dtb \
+	armada-370-synology-ds213j.dtb
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
@@ -534,7 +535,8 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-lenovo-ix4-300d.dtb \
 	armada-xp-matrix.dtb \
 	armada-xp-netgear-rn2120.dtb \
-	armada-xp-openblocks-ax3-4.dtb
+	armada-xp-openblocks-ax3-4.dtb \
+	armada-xp-synology-ds414.dtb
 dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-cubox-es.dtb \
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index a495e5821ab8..1466580be295 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -75,6 +75,7 @@
 				clock-frequency = <100000>;
 				status = "okay";
 				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
 					compatible = "cirrus,cs42l51";
 					reg = <0x4a>;
 				};
@@ -102,30 +103,6 @@
 				broken-cd;
 			};
 
-			pinctrl {
-				/*
-				 * These pins might be muxed as I2S by
-				 * the bootloader, but it conflicts
-				 * with the real I2S pins that are
-				 * muxed using i2s_pins. We must mux
-				 * those pins to a function other than
-				 * I2S.
-				 */
-				pinctrl-0 = <&hog_pins1 &hog_pins2>;
-				pinctrl-names = "default";
-
-				hog_pins1: hog-pins1 {
-					marvell,pins = "mpp6",  "mpp8", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "gpio";
-				};
-
-				hog_pins2: hog-pins2 {
-					marvell,pins = "mpp5", "mpp7", "mpp9";
-					marvell,function = "gpo";
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
@@ -135,6 +112,8 @@
 			};
 
 			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins2>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				spi-flash@0 {
@@ -167,17 +146,84 @@
 	};
 
 	sound {
-	      compatible = "marvell,a370db-audio";
-	      marvell,audio-controller = <&audio_controller>;
-	      marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
-	      status = "okay";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 370 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1L", "In Jack";
+		status = "okay";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
 	};
 
 	spdif_out: spdif-out {
-	      compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
 	};
 
 	spdif_in: spdif-in {
-	      compatible = "linux,spdif-dir";
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&pinctrl {
+	/*
+	 * These pins might be muxed as I2S by
+	 * the bootloader, but it conflicts
+	 * with the real I2S pins that are
+	 * muxed using i2s_pins. We must mux
+	 * those pins to a function other than
+	 * I2S.
+	 */
+	pinctrl-0 = <&hog_pins1 &hog_pins2>;
+	pinctrl-names = "default";
+
+	hog_pins1: hog-pins1 {
+		marvell,pins = "mpp6",  "mpp8", "mpp10",
+			       "mpp12", "mpp13";
+		marvell,function = "gpio";
+	};
+
+	hog_pins2: hog-pins2 {
+		marvell,pins = "mpp5", "mpp7", "mpp9";
+		marvell,function = "gpo";
 	};
 };
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 2b6d24e0d1e8..e1b0eb6b091f 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -54,18 +54,6 @@
 				status = "okay";
 			};
 
-			pinctrl {
-				pwr_led_pin: pwr-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				stat_led_pins: stat-led-pins {
-					marvell,pins = "mpp64", "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
 			gpio_leds {
 				compatible = "gpio-leds";
 				pinctrl-names = "default";
@@ -169,3 +157,16 @@
 		};
 	};
 };
+
+&pinctrl {
+	pwr_led_pin: pwr-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpo";
+	};
+
+	stat_led_pins: stat-led-pins {
+		marvell,pins = "mpp64", "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 1e38628f4060..4e24932c6e30 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -59,48 +59,6 @@
 				status = "okay";
 			};
 
-			pinctrl {
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp57";
-					marvell,function = "gpio";
-				};
-
-				sata1_led_pin: sata1-led-pin {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				sata2_led_pin: sata2-led-pin {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp56";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp58";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				poweroff: poweroff {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-			};
-
 			mdio {
 				pinctrl-0 = <&mdio_pins>;
 				pinctrl-names = "default";
@@ -257,3 +215,45 @@
 		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 	};
 };
+
+&pinctrl {
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	poweroff: poweroff {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index c2f414bb9aba..30586e47986a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -53,38 +53,6 @@
 				status = "okay";
 			};
 
-			pinctrl {
-				poweroff: poweroff {
-					marvell,pins = "mpp60";
-					marvell,function = "gpio";
-				};
-
-				backup_button_pin: backup-button-pin {
-					marvell,pins = "mpp52";
-					marvell,function = "gpio";
-				};
-
-				power_button_pin: power-button-pin {
-					marvell,pins = "mpp62";
-					marvell,function = "gpio";
-				};
-
-				backup_led_pin: backup-led-pin {
-					marvell,pins = "mpp63";
-					marvell,function = "gpo";
-				};
-
-				power_led_pin: power-led-pin {
-					marvell,pins = "mpp64";
-					marvell,function = "gpio";
-				};
-
-				reset_button_pin: reset-button-pin {
-					marvell,pins = "mpp65";
-					marvell,function = "gpio";
-				};
-			};
-
 			mdio {
 				pinctrl-0 = <&mdio_pins>;
 				pinctrl-names = "default";
@@ -269,3 +237,35 @@
 		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 	};
 };
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpo";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index f57a8f841498..394308951ed9 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -59,18 +59,6 @@
 		};
 
 		internal-regs {
-			pinctrl {
-				fan_pins: fan-pins {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				led_pins: led-pins {
-					marvell,pins = "mpp32";
-					marvell,function = "gpio";
-				};
-			};
-
 			serial@12000 {
 				status = "okay";
 			};
@@ -85,10 +73,6 @@
 				phy0: ethernet-phy@0 {
 					reg = <0>;
 				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
 			};
 
 			ethernet@70000 {
@@ -100,8 +84,11 @@
 				pinctrl-0 = <&ge1_rgmii_pins>;
 				pinctrl-names = "default";
 				status = "okay";
-				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				fixed-link {
+					   speed = <1000>;
+					   full-duplex;
+				};
 			};
 
 			mvsdio@d4000 {
@@ -173,4 +160,56 @@
 			};
 		};
 	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth1>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x10 0>;	/* MDIO address 16, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan1";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan3";
+			};
+
+			port@5 {
+			      reg = <5>;
+			      label = "cpu";
+			};
+		};
+	 };
  };
+
+&pinctrl {
+	fan_pins: fan-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	led_pins: led-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
new file mode 100644
index 000000000000..70fecde76ccb
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -0,0 +1,316 @@
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Synology DS213j";
+	compatible = "synology,ds213j", "marvell,armada370",
+		     "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+
+			/* RTC provided by Seiko S-35390A I2C RTC chip below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "micron,n25q064";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <20000000>;
+
+					/*
+					 * Warning!
+					 *
+					 * Synology u-boot uses its compiled-in environment
+					 * and it seems Synology did not care to change u-boot
+					 * default configuration in order to allow saving a
+					 * modified environment at a sensible location. So,
+					 * if you do a 'saveenv' under u-boot, your modified
+					 * environment will be saved at 1MB after the start
+					 * of the flash, i.e. in the middle of the uImage.
+					 * For that reason, it is strongly advised not to
+					 * change the default environment, unless you know
+					 * what you are doing.
+					 */
+					partition@00000000 { /* u-boot */
+						label = "RedBoot";
+						reg = <0x00000000 0x000c0000>; /* 768KB */
+					};
+
+					partition@000c0000 { /* uImage */
+						label = "zImage";
+						reg = <0x000c0000 0x002d0000>; /* 2880KB */
+					};
+
+					partition@00390000 { /* uInitramfs */
+						label = "rd.gz";
+						reg = <0x00390000 0x00440000>; /* 4250KB */
+					};
+
+					partition@007d0000 { /* MAC address and serial number */
+						label = "vendor";
+						reg = <0x007d0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007e0000 {
+						label = "RedBoot config";
+						reg = <0x007e0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007f0000 {
+						label = "FIS directory";
+						reg = <0x007f0000 0x00010000>; /* 64KB */
+					};
+				};
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Main device RTC chip */
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a TI MSP430F2111 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* rear USB port, near reset button */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* rear USB port, near RJ45 port */
+			usb@51000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+			       status = "okay";
+			       phy = <&phy1>;
+			       phy-mode = "sgmii";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-fan-32-38 {
+		status = "okay";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+			     &fan_ctrl_high_pin &fan_alarm_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+			 &gpio2  0 GPIO_ACTIVE_HIGH
+			 &gpio2  1 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       1000 1
+				       1150 2
+				       1350 4
+				       1500 3
+				       1650 5
+				       1750 6
+				       1900 7 >;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&disk1_led_pin
+			     &disk2_led_pin>;
+		pinctrl-names = "default";
+
+		disk1-led-amber {
+			label = "synology:amber:disk1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		disk2-led-amber {
+			label = "synology:amber:disk2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	disk1_led_pin: disk1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	disk2_led_pin: disk2-led-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp37";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit3_pin: syno-id-bit3-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_low_pin: fan-ctrl-low-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_high_pin: fan-ctrl-high-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpo";
+	};
+
+	fan_alarm_pin: fan-alarm-pin {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 83286ec9702c..83c31c86dd09 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -151,7 +151,7 @@
 				status = "disabled";
 			};
 
-			serial@12000 {
+			uart0: serial@12000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
@@ -160,7 +160,8 @@
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
-			serial@12100 {
+
+			uart1: serial@12100 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
@@ -170,6 +171,10 @@
 				status = "disabled";
 			};
 
+			pinctrl: pin-ctrl@18000 {
+				reg = <0x18000 0x38>;
+			};
+
 			coredivclk: corediv-clock@18740 {
 				compatible = "marvell,armada-370-corediv-clock";
 				reg = <0x18740 0xc>;
@@ -232,7 +237,7 @@
 				status = "disabled";
 			};
 
-			mdio {
+			mdio: mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 7851942e244a..fdb3c12a6139 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -99,78 +99,26 @@
 				wt-override;
 			};
 
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
+			/*
+			 * Default SPI pinctrl setting, can be overwritten on
+			 * board level if a different configuration is used.
+			 */
+			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins1>;
+				pinctrl-names = "default";
 			};
 
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
+			spi1: spi@10680 {
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
 			};
 
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
+			i2c0: i2c@11000 {
+				reg = <0x11000 0x20>;
 			};
 
-			pinctrl {
-				compatible = "marvell,mv88f6710-pinctrl";
-				reg = <0x18000 0x38>;
-
-				sdio_pins1: sdio-pins1 {
-					marvell,pins = "mpp9",  "mpp11", "mpp12",
-							"mpp13", "mpp14", "mpp15";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins2: sdio-pins2 {
-					marvell,pins = "mpp47", "mpp48", "mpp49",
-							"mpp50", "mpp51", "mpp52";
-					marvell,function = "sd0";
-				};
-
-				sdio_pins3: sdio-pins3 {
-					marvell,pins = "mpp48", "mpp49", "mpp50",
-							"mpp51", "mpp52", "mpp53";
-					marvell,function = "sd0";
-				};
-
-				i2c0_pins: i2c0-pins {
-					marvell,pins = "mpp2", "mpp3";
-					marvell,function = "i2c0";
-				};
-
-				i2s_pins1: i2s-pins1 {
-					marvell,pins = "mpp5", "mpp6", "mpp7",
-						       "mpp8", "mpp9", "mpp10",
-						       "mpp12", "mpp13";
-					marvell,function = "audio";
-				};
-
-				i2s_pins2: i2s-pins2 {
-					marvell,pins = "mpp49", "mpp47", "mpp50",
-						       "mpp59", "mpp57", "mpp61",
-						       "mpp62", "mpp60", "mpp58";
-					marvell,function = "audio";
-				};
-
-				mdio_pins: mdio-pins {
-					marvell,pins = "mpp17", "mpp18";
-					marvell,function = "ge";
-				};
-
-				ge0_rgmii_pins: ge0-rgmii-pins {
-					marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
-						       "mpp9", "mpp10", "mpp11", "mpp12",
-						       "mpp13", "mpp14", "mpp15", "mpp16";
-					marvell,function = "ge0";
-				};
-
-				ge1_rgmii_pins: ge1-rgmii-pins {
-					marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
-						       "mpp23", "mpp24", "mpp25", "mpp26",
-						       "mpp27", "mpp28", "mpp29", "mpp30";
-					marvell,function = "ge1";
-				};
+			i2c1: i2c@11100 {
+				reg = <0x11100 0x20>;
 			};
 
 			gpio0: gpio@18100 {
@@ -206,6 +154,26 @@
 				interrupts = <91>;
 			};
 
+			/*
+			 * Default UART pinctrl setting without RTS/CTS, can
+			 * be overwritten on board level if a different
+			 * configuration is used.
+			 */
+			uart0: serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+			};
+
+			uart1: serial@12100 {
+				pinctrl-0 = <&uart1_pins>;
+				pinctrl-names = "default";
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
 			gateclk: clock-gating-control@18220 {
 				compatible = "marvell,armada-370-gating-clock";
 				reg = <0x18220 0x4>;
@@ -250,6 +218,7 @@
 			};
 
 			audio_controller: audio-controller@30000 {
+				#sound-dai-cells = <1>;
 				compatible = "marvell,armada370-audio";
 				reg = <0x30000 0x4000>;
 				interrupts = <93>;
@@ -306,3 +275,91 @@
 		};
 	};
 };
+
+&pinctrl {
+	compatible = "marvell,mv88f6710-pinctrl";
+
+	spi0_pins1: spi0-pins1 {
+		marvell,pins = "mpp33", "mpp34",
+			       "mpp35", "mpp36";
+		marvell,function = "spi0";
+	};
+
+	spi0_pins2: spi0_pins2 {
+		marvell,pins = "mpp32", "mpp63",
+			       "mpp64", "mpp65";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp49", "mpp50",
+			       "mpp51", "mpp52";
+		marvell,function = "spi1";
+	};
+
+	uart0_pins: uart0-pins {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "uart0";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp41", "mpp42";
+		marvell,function = "uart1";
+	};
+
+	sdio_pins1: sdio-pins1 {
+		marvell,pins = "mpp9",  "mpp11", "mpp12",
+				"mpp13", "mpp14", "mpp15";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins2: sdio-pins2 {
+		marvell,pins = "mpp47", "mpp48", "mpp49",
+				"mpp50", "mpp51", "mpp52";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins3: sdio-pins3 {
+		marvell,pins = "mpp48", "mpp49", "mpp50",
+				"mpp51", "mpp52", "mpp53";
+		marvell,function = "sd0";
+	};
+
+	i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "i2c0";
+	};
+
+	i2s_pins1: i2s-pins1 {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10",
+			       "mpp12", "mpp13";
+		marvell,function = "audio";
+	};
+
+	i2s_pins2: i2s-pins2 {
+		marvell,pins = "mpp49", "mpp47", "mpp50",
+			       "mpp59", "mpp57", "mpp61",
+			       "mpp62", "mpp60", "mpp58";
+		marvell,function = "audio";
+	};
+
+	mdio_pins: mdio-pins {
+		marvell,pins = "mpp17", "mpp18";
+		marvell,function = "ge";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+			       "mpp9", "mpp10", "mpp11", "mpp12",
+			       "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25", "mpp26",
+			       "mpp27", "mpp28", "mpp29", "mpp30";
+		marvell,function = "ge1";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
index 1af886f1e486..2aaa9d2ac284 100644
--- a/arch/arm/boot/dts/armada-385-db.dts
+++ b/arch/arm/boot/dts/armada-385-db.dts
@@ -116,11 +116,11 @@
 			};
 
 			sdhci@d8000 {
-				clock-frequency = <200000000>;
 				broken-cd;
 				wp-inverted;
 				bus-width = <8>;
 				status = "okay";
+				no-1-8-v;
 			};
 
 			usb3@f0000 {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 242d0ecc99f3..74391dace9e7 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -25,9 +25,9 @@
 	aliases {
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
-		eth0 = &eth0;
-		eth1 = &eth1;
-		eth2 = &eth2;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 0e53fad111de..ca0200e20751 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -84,14 +84,14 @@
 			};
 
 			ethernet@70000 {
-				pinctrl-0 = <&pmx_ge0_rgmii>;
+				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
 			};
 			ethernet@74000 {
-				pinctrl-0 = <&pmx_ge1_rgmii>;
+				pinctrl-0 = <&ge1_rgmii_pins>;
 				pinctrl-names = "default";
 				status = "okay";
 				phy = <&phy1>;
@@ -100,8 +100,6 @@
 
 			spi0: spi@10600 {
 				status = "okay";
-				pinctrl-0 = <&pmx_spi>;
-				pinctrl-names = "default";
 
 				spi-flash@0 {
 					#address-cells = <1>;
@@ -118,7 +116,7 @@
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		pinctrl-0 = <&pmx_keys>;
+		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
 		button@1 {
@@ -130,20 +128,15 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <&pmx_phy_int>;
+	pinctrl-0 = <&phy_int_pin>;
 	pinctrl-names = "default";
 
-	pmx_keys: pmx-keys {
+	keys_pin: keys-pin {
 		marvell,pins = "mpp33";
 		marvell,function = "gpio";
 	};
 
-	pmx_spi: pmx-spi {
-		marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
-		marvell,function = "spi";
-	};
-
-	pmx_phy_int: pmx-phy-int {
+	phy_int_pin: phy-int-pin {
 		marvell,pins = "mpp32";
 		marvell,function = "gpio";
 	};
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index aa5463c91924..a2ef93c1eb10 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -22,7 +22,7 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200 earlyprintk";
-		stdout-path = "/soc/internal-regs/serial@12000";
+		stdout-path = &uart0;
 	};
 
 	memory {
@@ -66,7 +66,7 @@
 			};
 
 			ethernet@70000 {
-				pinctrl-0 = <&pmx_ge0_rgmii>;
+				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
 				status = "okay";
 				phy = <&phy0>;
@@ -74,7 +74,7 @@
 			};
 
 			ethernet@74000 {
-				pinctrl-0 = <&pmx_ge1_rgmii>;
+				pinctrl-0 = <&ge1_rgmii_pins>;
 				pinctrl-names = "default";
 				status = "okay";
 				phy = <&phy1>;
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
new file mode 100644
index 000000000000..749fdba5a642
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -0,0 +1,330 @@
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Synology DS414";
+	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * Connected to Marvell 88SX7042 SATA-II controller
+			 * handling the four disks.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/*
+			 * Connected to EtronTech EJ168A XHCI controller
+			 * providing the two rear USB 3.0 ports.
+			 */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+
+			/* RTC is provided by Seiko S-35390A below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "micron,n25q064";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <20000000>;
+
+					/*
+					 * Warning!
+					 *
+					 * Synology u-boot uses its compiled-in environment
+					 * and it seems Synology did not care to change u-boot
+					 * default configuration in order to allow saving a
+					 * modified environment at a sensible location. So,
+					 * if you do a 'saveenv' under u-boot, your modified
+					 * environment will be saved at 1MB after the start
+					 * of the flash, i.e. in the middle of the uImage.
+					 * For that reason, it is strongly advised not to
+					 * change the default environment, unless you know
+					 * what you are doing.
+					 */
+					partition@00000000 { /* u-boot */
+						label = "RedBoot";
+						reg = <0x00000000 0x000d0000>; /* 832KB */
+					};
+
+					partition@000c0000 { /* uImage */
+						label = "zImage";
+						reg = <0x000d0000 0x002d0000>; /* 2880KB */
+					};
+
+					partition@003a0000 { /* uInitramfs */
+						label = "rd.gz";
+						reg = <0x003a0000 0x00430000>; /* 4250KB */
+					};
+
+					partition@007d0000 { /* MAC address and serial number */
+						label = "vendor";
+						reg = <0x007d0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007e0000 {
+						label = "RedBoot config";
+						reg = <0x007e0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007f0000 {
+						label = "FIS directory";
+						reg = <0x007f0000 0x00010000>; /* 64KB */
+					};
+				};
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB. This
+			 * provides the main console for the device.
+			 *
+			 * Warning: the device may not boot with a 3.3V
+			 * USB-serial converter connected when the power
+			 * button is pressed. The converter needs to be
+			 * connected a few seconds after pressing the
+			 * power button. This is possibly due to UART0_TXD
+			 * pin being sampled at reset (bit 0 of SAR).
+			 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a Microchip PIC16F883 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+			     &sata3_pwr_pin &sata4_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata3_regulator: sata3-regulator {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA3 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <6000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata4_regulator: sata4-regulator {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA4 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <8000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata3_pwr_pin: sata3-pwr-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	sata4_pwr_pin: sata4-pwr-pin {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	fan1_alarm_pin: fan1-alarm-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	fan2_alarm_pin: fan2-alarm-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index a3919b644737..a2a6451524dc 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -43,6 +43,11 @@
 				wt-override;
 			};
 
+			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+			};
+
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x100>;
@@ -53,8 +58,10 @@
 				reg = <0x11100 0x100>;
 			};
 
-			serial@12200 {
+			uart2: serial@12200 {
 				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart2_pins>;
+				pinctrl-names = "default";
 				reg = <0x12200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
@@ -62,8 +69,11 @@
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
-			serial@12300 {
+
+			uart3: serial@12300 {
 				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart3_pins>;
+				pinctrl-names = "default";
 				reg = <0x12300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
@@ -72,43 +82,6 @@
 				status = "disabled";
 			};
 
-			pinctrl: pin-ctrl@18000 {
-				reg = <0x18000 0x38>;
-
-				pmx_ge0_gmii: pmx-ge0-gmii {
-					marvell,pins =
-					     "mpp0",  "mpp1",  "mpp2",  "mpp3",
-					     "mpp4",  "mpp5",  "mpp6",  "mpp7",
-					     "mpp8",  "mpp9",  "mpp10", "mpp11",
-					     "mpp12", "mpp13", "mpp14", "mpp15",
-					     "mpp16", "mpp17", "mpp18", "mpp19",
-					     "mpp20", "mpp21", "mpp22", "mpp23";
-					marvell,function = "ge0";
-				};
-
-				pmx_ge0_rgmii: pmx-ge0-rgmii {
-					marvell,pins =
-					     "mpp0", "mpp1", "mpp2", "mpp3",
-					     "mpp4", "mpp5", "mpp6", "mpp7",
-					     "mpp8", "mpp9", "mpp10", "mpp11";
-					marvell,function = "ge0";
-				};
-
-				pmx_ge1_rgmii: pmx-ge1-rgmii {
-					marvell,pins =
-					     "mpp12", "mpp13", "mpp14", "mpp15",
-					     "mpp16", "mpp17", "mpp18", "mpp19",
-					     "mpp20", "mpp21", "mpp22", "mpp23";
-					marvell,function = "ge1";
-				};
-
-				sdio_pins: sdio-pins {
-					marvell,pins = "mpp30", "mpp31", "mpp32",
-						       "mpp33", "mpp34", "mpp35";
-					marvell,function = "sd0";
-				};
-			};
-
 			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x500>;
@@ -237,3 +210,54 @@
 		};
 	};
 };
+
+&pinctrl {
+	ge0_gmii_pins: ge0-gmii-pins {
+		marvell,pins =
+		     "mpp0",  "mpp1",  "mpp2",  "mpp3",
+		     "mpp4",  "mpp5",  "mpp6",  "mpp7",
+		     "mpp8",  "mpp9",  "mpp10", "mpp11",
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge0";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins =
+		     "mpp0", "mpp1", "mpp2", "mpp3",
+		     "mpp4", "mpp5", "mpp6", "mpp7",
+		     "mpp8", "mpp9", "mpp10", "mpp11";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins =
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge1";
+	};
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp30", "mpp31", "mpp32",
+			       "mpp33", "mpp34", "mpp35";
+		marvell,function = "sd0";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp36", "mpp37",
+			       "mpp38", "mpp39";
+		marvell,function = "spi";
+	};
+
+	uart2_pins: uart2-pins {
+		marvell,pins = "mpp42", "mpp43";
+		marvell,function = "uart2";
+	};
+
+	uart3_pins: uart3-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "uart3";
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 811e0971fc58..8be5b2e4626e 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -266,7 +266,7 @@
 
 			s35390a: s35390a@30 {
 				status = "disabled";
-				compatible = "ssi,s35390a";
+				compatible = "sii,s35390a";
 				reg = <0x30>;
 			};
 		};