diff options
| author | Kevin Hilman <khilman@linaro.org> | 2013-08-21 21:16:55 +0400 |
|---|---|---|
| committer | Kevin Hilman <khilman@linaro.org> | 2013-08-21 21:17:18 +0400 |
| commit | bfa664f21b0357f2ad9cdf519f594ece36ec8f64 (patch) | |
| tree | f377028eba58633d917d65c1141977b2e8ca9529 /arch | |
| parent | 5515d9981f5f30e82d096921f86ba016911c9ea8 (diff) | |
| parent | b4f173752a56187bd55752b0474429202f2ab1d3 (diff) | |
| download | linux-bfa664f21b0357f2ad9cdf519f594ece36ec8f64.tar.xz | |
Merge tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc
From: Stephen Warren:
ARM: tegra: core SoC enhancements for 3.12
This branch includes a number of enhancements to core SoC support for
Tegra devices. The major new features are:
* Adds a new CPU-power-gated cpuidle state for Tegra114.
* Adds initial system suspend support for Tegra114, initially supporting
just CPU-power-gating during suspend.
* Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode
both gates CPU power, and places the DRAM into self-refresh mode.
* A new DT-driven PCIe driver to Tegra20/30. The driver is also moved
from arch/arm/mach-tegra/ to drivers/pci/host/.
The PCIe driver work depends on the following tag from Thomas Petazzoni:
git://git.infradead.org/linux-mvebu.git mis-3.12.2
... which is merged into the middle of this pull request.
* tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (33 commits)
ARM: tegra: disable LP2 cpuidle state if PCIe is enabled
MAINTAINERS: Add myself as Tegra PCIe maintainer
PCI: tegra: set up PADS_REFCLK_CFG1
PCI: tegra: Add Tegra 30 PCIe support
PCI: tegra: Move PCIe driver to drivers/pci/host
PCI: msi: add default MSI operations for !HAVE_GENERIC_HARDIRQS platforms
ARM: tegra: add LP1 suspend support for Tegra114
ARM: tegra: add LP1 suspend support for Tegra20
ARM: tegra: add LP1 suspend support for Tegra30
ARM: tegra: add common LP1 suspend support
clk: tegra114: add LP1 suspend/resume support
ARM: tegra: config the polarity of the request of sys clock
ARM: tegra: add common resume handling code for LP1 resuming
ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pci
of: pci: add registry of MSI chips
PCI: Introduce new MSI chip infrastructure
PCI: remove ARCH_SUPPORTS_MSI kconfig option
PCI: use weak functions for MSI arch-specific functions
ARM: tegra: unify Tegra's Kconfig a bit more
ARM: tegra: remove the limitation that Tegra114 can't support suspend
...
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Diffstat (limited to 'arch')
46 files changed, 1446 insertions, 1122 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 50eada8260a9..a3267d795c77 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -441,7 +441,6 @@ config ARCH_NETX config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU - select ARCH_SUPPORTS_MSI select CPU_XSC3 select NEED_MACH_MEMORY_H select NEED_RET_TO_USER diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index a1c90d7feb0e..454d642a4070 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -36,6 +36,8 @@ struct hw_pci { resource_size_t start, resource_size_t size, resource_size_t align); + void (*add_bus)(struct pci_bus *bus); + void (*remove_bus)(struct pci_bus *bus); }; /* @@ -63,6 +65,8 @@ struct pci_sys_data { resource_size_t start, resource_size_t size, resource_size_t align); + void (*add_bus)(struct pci_bus *bus); + void (*remove_bus)(struct pci_bus *bus); void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 261fcc826169..1ec9c8701c26 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -363,6 +363,20 @@ void pcibios_fixup_bus(struct pci_bus *bus) } EXPORT_SYMBOL(pcibios_fixup_bus); +void pcibios_add_bus(struct pci_bus *bus) +{ + struct pci_sys_data *sys = bus->sysdata; + if (sys->add_bus) + sys->add_bus(bus); +} + +void pcibios_remove_bus(struct pci_bus *bus) +{ + struct pci_sys_data *sys = bus->sysdata; + if (sys->remove_bus) + sys->remove_bus(bus); +} + /* * Swizzle the device pin each time we cross a bridge. If a platform does * not provide a swizzle function, we perform the standard PCI swizzling. @@ -464,6 +478,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; sys->align_resource = hw->align_resource; + sys->add_bus = hw->add_bus; + sys->remove_bus = hw->remove_bus; INIT_LIST_HEAD(&sys->resources); if (hw->private_data) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index ef3a8da49b2d..def056493260 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -2,19 +2,27 @@ config ARCH_TEGRA bool "NVIDIA Tegra" if ARCH_MULTI_V7 select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ARM_GIC select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_OF select COMMON_CLK + select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if LOCAL_TIMERS select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL select SOC_BUS select SPARSE_IRQ + select USB_ARCH_HAS_EHCI if USB_SUPPORT + select USB_ULPI if USB_PHY + select USB_ULPI_VIEWPORT if USB_PHY select USE_OF + select MIGHT_HAVE_PCI + select ARCH_SUPPORTS_MSI help This enables support for NVIDIA Tegra based systems. @@ -27,15 +35,9 @@ config ARCH_TEGRA_2x_SOC select ARM_ERRATA_720789 select ARM_ERRATA_754327 if SMP select ARM_ERRATA_764369 if SMP - select ARM_GIC - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA20 select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -44,14 +46,8 @@ config ARCH_TEGRA_3x_SOC bool "Enable support for Tegra30 family" select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP - select ARM_GIC - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA30 select PL310_ERRATA_769419 if CACHE_L2X0 - select USB_ARCH_HAS_EHCI if USB_SUPPORT - select USB_ULPI if USB_PHY - select USB_ULPI_VIEWPORT if USB_PHY help Support for NVIDIA Tegra T30 processor family, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller @@ -59,20 +55,13 @@ config ARCH_TEGRA_3x_SOC config ARCH_TEGRA_114_SOC bool "Enable support for Tegra114 family" select HAVE_ARM_ARCH_TIMER - select ARM_GIC + select ARM_ERRATA_798181 select ARM_L1_CACHE_SHIFT_6 - select CPU_V7 - select PINCTRL select PINCTRL_TEGRA114 help Support for NVIDIA Tegra T114 processor family, based on the ARM CortexA15MP CPU -config TEGRA_PCI - bool "PCI Express support" - depends on ARCH_TEGRA_2x_SOC - select PCI - config TEGRA_AHB bool "Enable AHB driver for NVIDIA Tegra SoCs" default y diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 98b184efc110..e7e5f45c6558 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -17,24 +17,24 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-tegra20.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pm-tegra20.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += cpuidle-tegra20.o endif obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114_speedo.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_114_SOC) += pm-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_114_SOC) += cpuidle-tegra114.o endif -obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-harmony-pcie.o - obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-paz00.o diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c deleted file mode 100644 index 035b240b9e15..000000000000 --- a/arch/arm/mach-tegra/board-harmony-pcie.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/mach-tegra/board-harmony-pcie.c - * - * Copyright (C) 2010 CompuLab, Ltd. - * Mike Rapoport <mike@compulab.co.il> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/err.h> -#include <linux/of_gpio.h> -#include <linux/regulator/consumer.h> - -#include <asm/mach-types.h> - -#include "board.h" - -#ifdef CONFIG_TEGRA_PCI - -int __init harmony_pcie_init(void) -{ - struct device_node *np; - int en_vdd_1v05; - struct regulator *regulator = NULL; - int err; - - np = of_find_node_by_path("/regulators/regulator@3"); - if (!np) { - pr_err("%s: of_find_node_by_path failed\n", __func__); - return -ENODEV; - } - - en_vdd_1v05 = of_get_named_gpio(np, "gpio", 0); - if (en_vdd_1v05 < 0) { - pr_err("%s: of_get_named_gpio failed: %d\n", __func__, - en_vdd_1v05); - return en_vdd_1v05; - } - - err = gpio_request(en_vdd_1v05, "EN_VDD_1V05"); - if (err) { - pr_err("%s: gpio_request failed: %d\n", __func__, err); - return err; - } - - gpio_direction_output(en_vdd_1v05, 1); - - regulator = regulator_get(NULL, "vdd_ldo0,vddio_pex_clk"); - if (IS_ERR(regulator)) { - err = PTR_ERR(regulator); - pr_err("%s: regulator_get failed: %d\n", __func__, err); - goto err_reg; - } - - err = regulator_enable(regulator); - if (err) { - pr_err("%s: regulator_enable failed: %d\n", __func__, err); - goto err_en; - } - - err = tegra_pcie_init(true, true); - if (err) { - pr_err("%s: tegra_pcie_init failed: %d\n", __func__, err); - goto err_pcie; - } - - return 0; - -err_pcie: - regulator_disable(regulator); -err_en: - regulator_put(regulator); -err_reg: - gpio_free(en_vdd_1v05); - - return err; -} - -#endif diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index 9a6659fe2dc2..db6810dc0b3d 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -31,7 +31,6 @@ void __init tegra_init_early(void); void __init tegra_map_common_io(void); void __init tegra_init_irq(void); void __init tegra_dt_init_irq(void); -int __init tegra_pcie_init(bool init_port0, bool init_port1); void tegra_init_late(void); @@ -48,13 +47,6 @@ int __init tegra_powergate_debugfs_init(void); static inline int tegra_powergate_debugfs_init(void) { return 0; } #endif -int __init harmony_regulator_init(void); -#ifdef CONFIG_TEGRA_PCI -int __init harmony_pcie_init(void); -#else -static inline int harmony_pcie_init(void) { return 0; } -#endif - void __init tegra_paz00_wifikill_init(void); #endif diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 32f8eb3fe344..5900cc44f780 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -2,4 +2,3 @@ extern struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); -extern int tegra_cpu_disable(unsigned int cpu); diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index 1d1c6023f4a2..e0b87300243d 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -17,15 +17,64 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/clockchips.h> #include <asm/cpuidle.h> +#include <asm/suspend.h> +#include <asm/smp_plat.h> + +#include "pm.h" +#include "sleep.h" + +#ifdef CONFIG_PM_SLEEP +#define TEGRA114_MAX_STATES 2 +#else +#define TEGRA114_MAX_STATES 1 +#endif + +#ifdef CONFIG_PM_SLEEP +static int tegra114_idle_power_down(struct cpuidle_device *dev, + struct cpuidle_driver *drv, + int index) +{ + local_fiq_disable(); + + tegra_set_cpu_in_lp2(); + cpu_pm_enter(); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &dev->cpu); + + cpu_suspend(0, tegra30_sleep_cpu_secondary_finish); + + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu); + + cpu_pm_exit(); + tegra_clear_cpu_in_lp2(); + + local_fiq_enable(); + + return index; +} +#endif static struct cpuidle_driver tegra_idle_driver = { .name = "tegra_idle", .owner = THIS_MODULE, - .state_count = 1, + .state_count = TEGRA114_MAX_STATES, .states = { [0] = ARM_CPUIDLE_WFI_STATE_PWR(600), +#ifdef CONFIG_PM_SLEEP + [1] = { + .enter = tegra114_idle_power_down, + .exit_latency = 500, + .target_residency = 1000, + .power_usage = 0, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "powered-down", + .desc = "CPU power gated", + }, +#endif }, }; diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 706aa4215c36..b82dcaee2ef4 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -211,6 +211,18 @@ static int tegra20_idle_lp2_coupled(struct cpuidle_device *dev, } #endif +/* + * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether + * they are legacy IRQs or MSI, are lost when LP2 is enabled. To work around + * this, simply disable LP2 if the PCI driver and DT node are both enabled. + */ +void tegra20_cpuidle_pcie_irqs_in_use(void) +{ + pr_info_once( + "Disabling cpuidle LP2 state, since PCIe IRQs are in use\n"); + tegra_idle_driver.states[1].disabled = true; +} + int __init tegra20_cpuidle_init(void) { return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c index e85973cef037..0961dfcf83a4 100644 --- a/arch/arm/mach-tegra/cpuidle.c +++ b/arch/arm/mach-tegra/cpuidle.c @@ -44,3 +44,13 @@ void __init tegra_cpuidle_init(void) break; } } + +void tegra_cpuidle_pcie_irqs_in_use(void) +{ + switch (tegra_chip_id) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_cpuidle_pcie_irqs_in_use(); + break; + } +} diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h index 9ec2c1ab0fa4..c017dab60ffa 100644 --- a/arch/arm/mach-tegra/cpuidle.h +++ b/arch/arm/mach-tegra/cpuidle.h @@ -19,6 +19,7 @@ #ifdef CONFIG_CPU_IDLE int tegra20_cpuidle_init(void); +void tegra20_cpuidle_pcie_irqs_in_use(void); int tegra30_cpuidle_init(void); int tegra114_cpuidle_init(void); void tegra_cpuidle_init(void); diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c index b477ef310dcd..5348543382bf 100644 --- a/arch/arm/mach-tegra/flowctrl.c +++ b/arch/arm/mach-tegra/flowctrl.c @@ -86,6 +86,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid) reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid; break; case TEGRA30: + case TEGRA114: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ @@ -123,6 +124,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid) reg &= ~TEGRA20_FLOW_CTRL_CSR_WFI_BITMAP; break; case TEGRA30: + case TEGRA114: /* clear wfe bitmap */ reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP; /* clear wfi bitmap */ diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h index 7a29bae799a7..c89aac60a143 100644 --- a/arch/arm/mach-tegra/flowctrl.h +++ b/arch/arm/mach-tegra/flowctrl.h @@ -28,9 +28,18 @@ #define FLOW_CTRL_SCLK_RESUME (1 << 27) #define FLOW_CTRL_HALT_CPU_IRQ (1 << 10) #define FLOW_CTRL_HALT_CPU_FIQ (1 << 8) +#define FLOW_CTRL_HALT_LIC_IRQ (1 << 11) +#define FLOW_CTRL_HALT_LIC_FIQ (1 << 10) +#define FLOW_CTRL_HALT_GIC_IRQ (1 << 9) +#define FLOW_CTRL_HALT_GIC_FIQ (1 << 8) #define FLOW_CTRL_CPU0_CSR 0x8 #define FLOW_CTRL_CSR_INTR_FLAG (1 << 15) #define FLOW_CTRL_CSR_EVENT_FLAG (1 << 14) +#define FLOW_CTRL_CSR_ENABLE_EXT_CRAIL (1 << 13) +#define FLOW_CTRL_CSR_ENABLE_EXT_NCPU (1 << 12) +#define FLOW_CTRL_CSR_ENABLE_EXT_MASK ( \ + FLOW_CTRL_CSR_ENABLE_EXT_NCPU | \ + FLOW_CTRL_CSR_ENABLE_EXT_CRAIL) #define FLOW_CTRL_CSR_ENABLE (1 << 0) #define FLOW_CTRL_HALT_CPU1_EVENTS 0x14 #define FLOW_CTRL_CPU1_CSR 0x18 diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S index 045c16f2dd51..2072e7322c39 100644 --- a/arch/arm/mach-tegra/headsmp.S +++ b/arch/arm/mach-tegra/headsmp.S @@ -6,6 +6,7 @@ .section ".text.head", "ax" ENTRY(tegra_secondary_startup) - bl v7_invalidate_l1 + check_cpu_part_num 0xc09, r8, r9 + bleq v7_invalidate_l1 b secondary_startup ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index a52c10e0a857..04de2e860923 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu) void __ref tegra_cpu_die(unsigned int cpu) { /* Clean L1 data cache */ - tegra_disable_clean_inv_dcache(); + tegra_disable_clean_inv_dcache(TEGRA_FLUSH_CACHE_LOUIS); /* Shut down the current CPU. */ tegra_hotplug_shutdown(); @@ -46,17 +46,6 @@ void __ref tegra_cpu_die(unsigned int cpu) BUG(); } -int tegra_cpu_disable(unsigned int cpu) -{ - switch (tegra_chip_id) { - case TEGRA20: - case TEGRA30: - return cpu == 0 ? -EPERM : 0; - default: - return 0; - } -} - void __init tegra_hotplug_init(void) { if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) diff --git a/arch/arm/mach-tegra/iomap.h b/arch/arm/mach-tegra/iomap.h index 399fbca27102..3f5fa0749bde 100644 --- a/arch/arm/mach-tegra/iomap.h +++ b/arch/arm/mach-tegra/iomap.h @@ -24,6 +24,8 @@ #define TEGRA_IRAM_BASE 0x40000000 #define TEGRA_IRAM_SIZE SZ_256K +#define TEGRA_IRAM_CODE_AREA (TEGRA_IRAM_BASE + SZ_4K) + #define TEGRA_HOST1X_BASE 0x50000000 #define TEGRA_HOST1X_SIZE 0x24000 @@ -237,6 +239,12 @@ #define TEGRA_KFUSE_BASE 0x7000FC00 #define TEGRA_KFUSE_SIZE SZ_1K +#define TEGRA_EMC0_BASE 0x7001A000 +#define TEGRA_EMC0_SIZE SZ_2K + +#define TEGRA_EMC1_BASE 0x7001A800 +#define TEGRA_EMC1_SIZE SZ_2K + #define TEGRA_CSITE_BASE 0x70040000 #define TEGRA_CSITE_SIZE SZ_256K @@ -278,9 +286,6 @@ #define IO_APB_VIRT IOMEM(0xFE300000) #define IO_APB_SIZE SZ_1M -#define TEGRA_PCIE_BASE 0x80000000 -#define TEGRA_PCIE_IO_BASE (TEGRA_PCIE_BASE + SZ_4M) - #define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) #define IO_TO_VIRT_XLATE(p, pst, vst) (((p) - (pst) + (vst))) diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 0de4eed1493d..1a74d562dca1 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -18,10 +18,12 @@ */ #include <linux/kernel.h> +#include <linux/cpu_pm.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/irqchip/arm-gic.h> #include <linux/syscore_ops.h> @@ -65,6 +67,7 @@ static u32 cpu_ier[TEGRA_MAX_NUM_ICTLRS]; static u32 cpu_iep[TEGRA_MAX_NUM_ICTLRS]; static u32 ictlr_wake_mask[TEGRA_MAX_NUM_ICTLRS]; +static void __iomem *tegra_gic_cpu_base; #endif bool tegra_pending_sgi(void) @@ -213,8 +216,43 @@ int tegra_legacy_irq_syscore_init(void) return 0; } + +static int tegra_gic_notifier(struct notifier_block *self, + unsigned long cmd, void *v) +{ + switch (cmd) { + case CPU_PM_ENTER: + writel_relaxed(0x1E0, tegra_gic_cpu_base + GIC_CPU_CTRL); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block tegra_gic_notifier_block = { + .notifier_call = tegra_gic_notifier, +}; + +static const struct of_device_id tegra114_dt_gic_match[] __initconst = { + { .compatible = "arm,cortex-a15-gic" }, + { } +}; + +static void tegra114_gic_cpu_pm_registration(void) +{ + struct device_node *dn; + + dn = of_find_matching_node(NULL, tegra114_dt_gic_match); + if (!dn) + return; + + tegra_gic_cpu_base = of_iomap(dn, 1); + + cpu_pm_register_notifier(&tegra_gic_notifier_block); +} #else #define tegra_set_wake NULL +static void tegra114_gic_cpu_pm_registration(void) { } #endif void __init tegra_init_irq(void) @@ -252,4 +290,6 @@ void __init tegra_init_irq(void) if (!of_have_populated_dt()) gic_init(0, 29, distbase, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100)); + + tegra114_gic_cpu_pm_registration(); } diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c deleted file mode 100644 index 46144a19a7e7..000000000000 --- a/arch/arm/mach-tegra/pcie.c +++ /dev/null @@ -1,886 +0,0 @@ -/* - * arch/arm/mach-tegra/pci.c - * - * PCIe host controller driver for TEGRA(2) SOCs - * - * Copyright (c) 2010, CompuLab, Ltd. - * Author: Mike Rapoport <mike@compulab.co.il> - * - * Based on NVIDIA PCIe driver - * Copyright (c) 2008-2009, NVIDIA Corporation. - * - * Bits taken from arch/arm/mach-dove/pcie.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/export.h> -#include <linux/clk/tegra.h> -#include <linux/tegra-powergate.h> - -#include <asm/sizes.h> -#include <asm/mach/pci.h> - -#include "board.h" -#include "iomap.h" - -/* Hack - need to parse this from DT */ -#define INT_PCIE_INTR 130 - -/* register definitions */ -#define AFI_OFFSET 0x3800 -#define PADS_OFFSET 0x3000 -#define RP0_OFFSET 0x0000 -#define RP1_OFFSET 0x1000 - -#define AFI_AXI_BAR0_SZ 0x00 -#define AFI_AXI_BAR1_SZ 0x04 -#define AFI_AXI_BAR2_SZ 0x08 -#define AFI_AXI_BAR3_SZ 0x0c -#define AFI_AXI_BAR4_SZ 0x10 -#define AFI_AXI_BAR5_SZ 0x14 - -#define AFI_AXI_BAR0_START 0x18 -#define AFI_AXI_BAR1_START 0x1c -#define AFI_AXI_BAR2_START 0x20 -#define AFI_AXI_BAR3_START 0x24 -#define AFI_AXI_BAR4_START 0x28 -#define AFI_AXI_BAR5_START 0x2c - -#define AFI_FPCI_BAR0 0x30 -#define AFI_FPCI_BAR1 0x34 -#define AFI_FPCI_BAR2 0x38 -#define AFI_FPCI_BAR3 0x3c -#define AFI_FPCI_BAR4 0x40 -#define AFI_FPCI_BAR5 0x44 - -#define AFI_CACHE_BAR0_SZ 0x48 -#define AFI_CACHE_BAR0_ST 0x4c -#define AFI_CACHE_BAR1_SZ 0x50 -#define AFI_CACHE_BAR1_ST 0x54 - -#define AFI_MSI_BAR_SZ 0x60 -#define AFI_MSI_FPCI_BAR_ST 0x64 -#define AFI_MSI_AXI_BAR_ST 0x68 - -#define AFI_CONFIGURATION 0xac -#define AFI_CONFIGURATION_EN_FPCI (1 << 0) - -#define AFI_FPCI_ERROR_MASKS 0xb0 - -#define AFI_INTR_MASK 0xb4 -#define AFI_INTR_MASK_INT_MASK (1 << 0) -#define AFI_INTR_MASK_MSI_MASK (1 << 8) - -#define AFI_INTR_CODE 0xb8 -#define AFI_INTR_CODE_MASK 0xf -#define AFI_INTR_MASTER_ABORT 4 -#define AFI_INTR_LEGACY 6 - -#define AFI_INTR_SIGNATURE 0xbc -#define AFI_SM_INTR_ENABLE 0xc4 - -#define AFI_AFI_INTR_ENABLE 0xc8 -#define AFI_INTR_EN_INI_SLVERR (1 << 0) -#define AFI_INTR_EN_INI_DECERR (1 << 1) -#define AFI_INTR_EN_TGT_SLVERR (1 << 2) -#define AFI_INTR_EN_TGT_DECERR (1 << 3) -#define AFI_INTR_EN_TGT_WRERR (1 << 4) -#define AFI_INTR_EN_DFPCI_DECERR (1 << 5) -#define AFI_INTR_EN_AXI_DECERR (1 << 6) -#define AFI_INTR_EN_FPCI_TIMEOUT (1 << 7) - -#define AFI_PCIE_CONFIG 0x0f8 -#define AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE (1 << 1) -#define AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE (1 << 2) -#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK (0xf << 20) -#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_SINGLE (0x0 << 20) -#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL (0x1 << 20) - -#define AFI_FUSE 0x104 -#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2) - -#define AFI_PEX0_CTRL 0x110 -#define AFI_PEX1_CTRL 0x118 -#define AFI_PEX_CTRL_RST (1 << 0) -#define AFI_PEX_CTRL_REFCLK_EN (1 << 3) - -#define RP_VEND_XP 0x00000F00 -#define RP_VEND_XP_DL_UP (1 << 30) - -#define RP_LINK_CONTROL_STATUS 0x00000090 -#define RP_LINK_CONTROL_STATUS_LINKSTAT_MASK 0x3fff0000 - -#define PADS_CTL_SEL 0x0000009C - -#define PADS_CTL 0x000000A0 -#define PADS_CTL_IDDQ_1L (1 << 0) -#define PADS_CTL_TX_DATA_EN_1L (1 << 6) -#define PADS_CTL_RX_DATA_EN_1L (1 << 10) - -#define PADS_PLL_CTL 0x000000B8 -#define PADS_PLL_CTL_RST_B4SM (1 << 1) -#define PADS_PLL_CTL_LOCKDET (1 << 8) -#define PADS_PLL_CTL_REFCLK_MASK (0x3 << 16) -#define PADS_PLL_CTL_REFCLK_INTERNAL_CML (0 << 16) -#define PADS_PLL_CTL_REFCLK_INTERNAL_CMOS (1 << 16) -#define PADS_PLL_CTL_REFCLK_EXTERNAL (2 << 16) -#define PADS_PLL_CTL_TXCLKREF_MASK (0x1 << 20) -#define PADS_PLL_CTL_TXCLKREF_DIV10 (0 << 20) -#define PADS_PLL_CTL_TXCLKREF_DIV5 (1 << 20) - -/* PMC access is required for PCIE xclk (un)clamping */ -#define PMC_SCRATCH42 0x144 -#define PMC_SCRATCH42_PCX_CLAMP (1 << 0) - -static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE); - -#define pmc_writel(value, reg) \ - __raw_writel(value, reg_pmc_base + (reg)) -#define pmc_readl(reg) \ - __raw_readl(reg_pmc_base + (reg)) - -/* - * Tegra2 defines 1GB in the AXI address map for PCIe. - * - * That address space is split into different regions, with sizes and - * offsets as follows: - * - * 0x80000000 - 0x80003fff - PCI controller registers - * 0x80004000 - 0x80103fff - PCI configuration space - * 0x80104000 - 0x80203fff - PCI extended configuration space - * 0x80203fff - 0x803fffff - unused - * 0x80400000 - 0x8040ffff - downstream IO - * 0x80410000 - 0x8fffffff - unused - * 0x90000000 - 0x9fffffff - non-prefetchable memory - * 0xa0000000 - 0xbfffffff - prefetchable memory - */ -#define PCIE_REGS_SZ SZ_16K -#define PCIE_CFG_OFF PCIE_REGS_SZ -#define PCIE_CFG_SZ SZ_1M -#define PCIE_EXT_CFG_OFF (PCIE_CFG_SZ + PCIE_CFG_OFF) -#define PCIE_EXT_CFG_SZ SZ_1M -#define PCIE_IOMAP_SZ (PCIE_REGS_SZ + PCIE_CFG_SZ + PCIE_EXT_CFG_SZ) - -#define MEM_BASE_0 (TEGRA_PCIE_BASE + SZ_256M) -#define MEM_SIZE_0 SZ_128M -#define MEM_BASE_1 (MEM_BASE_0 + MEM_SIZE_0) -#define MEM_SIZE_1 SZ_128M -#define PREFETCH_MEM_BASE_0 (MEM_BASE_1 + MEM_SIZE_1) -#define PREFETCH_MEM_SIZE_0 SZ_128M -#define PREFETCH_MEM_BASE_1 (PREFETCH_MEM_BASE_0 + PREFETCH_MEM_SIZE_0) -#define PREFETCH_MEM_SIZE_1 SZ_128M - -#define PCIE_CONF_BUS(b) ((b) << 16) -#define PCIE_CONF_DEV(d) ((d) << 11) -#define PCIE_CONF_FUNC(f) ((f) << 8) -#define PCIE_CONF_REG(r) \ - (((r) & ~0x3) | (((r) < 256) ? PCIE_CFG_OFF : PCIE_EXT_CFG_OFF)) - -struct tegra_pcie_port { - int index; - u8 root_bus_nr; - void __iomem *base; - - bool link_up; - - char mem_space_name[16]; - char prefetch_space_name[20]; - struct resource res[2]; -}; - -struct tegra_pcie_info { - struct tegra_pcie_port port[2]; - int num_ports; - - void __iomem *regs; - struct resource res_mmio; - - struct clk *pex_clk; - struct clk *afi_clk; - struct clk *pcie_xclk; - struct clk *pll_e; -}; - -static struct tegra_pcie_info tegra_pcie; - -static inline void afi_writel(u32 value, unsigned long offset) -{ - writel(value, offset + AFI_OFFSET + tegra_pcie.regs); -} - -static inline u32 afi_readl(unsigned long offset) -{ - return readl(offset + AFI_OFFSET + tegra_pcie.regs); -} - -static inline void pads_writel(u32 value, unsigned long offset) -{ - writel(value, offset + PADS_OFFSET + tegra_pcie.regs); -} - -static inline u32 pads_readl(unsigned long offset) -{ - return readl(offset + PADS_OFFSET + tegra_pcie.regs); -} - -static struct tegra_pcie_port *bus_to_port(int bus) -{ - int i; - - for (i = tegra_pcie.num_ports - 1; i >= 0; i--) { - int rbus = tegra_pcie.port[i].root_bus_nr; - if (rbus != -1 && rbus == bus) - break; - } - - return i >= 0 ? tegra_pcie.port + i : NULL; -} - -static int tegra_pcie_read_conf(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - struct tegra_pcie_port *pp = bus_to_port(bus->number); - void __iomem *addr; - - if (pp) { - if (devfn != 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - addr = pp->base + (where & ~0x3); - } else { - addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) + - PCIE_CONF_DEV(PCI_SLOT(devfn)) + - PCIE_CONF_FUNC(PCI_FUNC(devfn)) + - PCIE_CONF_REG(where)); - } - - *val = readl(addr); - - if (size == 1) - *val = (*val >> (8 * (where & 3))) & 0xff; - else if (size == 2) - *val = (*val >> (8 * (where & 3))) & 0xffff; - - return PCIBIOS_SUCCESSFUL; -} - -static int tegra_pcie_write_conf(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - struct tegra_pcie_port *pp = bus_to_port(bus->number); - void __iomem *addr; - - u32 mask; - u32 tmp; - - if (pp) { - if (devfn != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - addr = pp->base + (where & ~0x3); - } else { - addr = tegra_pcie.regs + (PCIE_CONF_BUS(bus->number) + - PCIE_CONF_DEV(PCI_SLOT(devfn)) + - PCIE_CONF_FUNC(PCI_FUNC(devfn)) + - PCIE_CONF_REG(where)); - } - - if (size == 4) { - writel(val, addr); - return PCIBIOS_SUCCESSFUL; - } - - if (size == 2) - mask = ~(0xffff << ((where & 0x3) * 8)); - else if (size == 1) - mask = ~(0xff << ((where & 0x3) * 8)); - else - return PCIBIOS_BAD_REGISTER_NUMBER; - - tmp = readl(addr) & mask; - tmp |= val << ((where & 0x3) * 8); - writel(tmp, addr); - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops tegra_pcie_ops = { - .read = tegra_pcie_read_conf, - .write = tegra_pcie_write_conf, -}; - -static void tegra_pcie_fixup_bridge(struct pci_dev *dev) -{ - u16 reg; - - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { - pci_read_config_word(dev, PCI_COMMAND, ®); - reg |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_SERR); - pci_write_config_word(dev, PCI_COMMAND, reg); - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge); - -/* Tegra PCIE root complex wrongly reports device class */ -static void tegra_pcie_fixup_class(struct pci_dev *dev) -{ - dev->class = PCI_CLASS_BRIDGE_PCI << 8; -} -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class); -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class); - -/* Tegra PCIE requires relaxed ordering */ -static void tegra_pcie_relax_enable(struct pci_dev *dev) -{ - pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN); -} -DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_relax_enable); - -static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) -{ - struct tegra_pcie_port *pp; - - if (nr >= tegra_pcie.num_ports) - return 0; - - pp = tegra_pcie.port + nr; - pp->root_bus_nr = sys->busnr; - - pci_ioremap_io(nr * SZ_64K, TEGRA_PCIE_IO_BASE); - - /* - * IORESOURCE_MEM - */ - snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), - "PCIe %d MEM", pp->index); - pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[0].name = pp->mem_space_name; - if (pp->index == 0) { - pp->res[0].start = MEM_BASE_0; - pp->res[0].end = pp->res[0].start + MEM_SIZE_0 - 1; - } else { - pp->res[0].start = MEM_BASE_1; - pp->res[0].end = pp->res[0].start + MEM_SIZE_1 - 1; - } - pp->res[0].flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res[0])) - panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->mem_offset); - - /* - * IORESOURCE_MEM | IORESOURCE_PREFETCH - */ - snprintf(pp->prefetch_space_name, sizeof(pp->prefetch_space_name), - "PCIe %d PREFETCH MEM", pp->index); - pp->prefetch_space_name[sizeof(pp->prefetch_space_name) - 1] = 0; - pp->res[1].name = pp->prefetch_space_name; - if (pp->index == 0) { - pp->res[1].start = PREFETCH_MEM_BASE_0; - pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_0 - 1; - } else { - pp->res[1].start = PREFETCH_MEM_BASE_1; - pp->res[1].end = pp->res[1].start + PREFETCH_MEM_SIZE_1 - 1; - } - pp->res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; - if (request_resource(&iomem_resource, &pp->res[1])) - panic("Request PCIe Prefetch Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); - - return 1; -} - -static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return INT_PCIE_INTR; -} - -static struct pci_bus __init *tegra_pcie_scan_bus(int nr, - struct pci_sys_data *sys) -{ - struct tegra_pcie_port *pp; - - if (nr >= tegra_pcie.num_ports) - return NULL; - - pp = tegra_pcie.port + nr; - pp->root_bus_nr = sys->busnr; - - return pci_scan_root_bus(NULL, sys->busnr, &tegra_pcie_ops, sys, - &sys->resources); -} - -static struct hw_pci tegra_pcie_hw __initdata = { - .nr_controllers = 2, - .setup = tegra_pcie_setup, - .scan = tegra_pcie_scan_bus, - .map_irq = tegra_pcie_map_irq, -}; - - -static irqreturn_t tegra_pcie_isr(int irq, void *arg) -{ - const char *err_msg[] = { - "Unknown", - "AXI slave error", - "AXI decode error", - "Target abort", - "Master abort", - "Invalid write", - "Response decoding error", - "AXI response decoding error", - "Transcation timeout", - }; - - u32 code, signature; - - code = afi_readl(AFI_INTR_CODE) & AFI_INTR_CODE_MASK; - signature = afi_readl(AFI_INTR_SIGNATURE); - afi_writel(0, AFI_INTR_CODE); - - if (code == AFI_INTR_LEGACY) - return IRQ_NONE; - - if (code >= ARRAY_SIZE(err_msg)) - code = 0; - - /* - * do not pollute kernel log with master abort reports since they - * happen a lot during enumeration - */ - if (code == AFI_INTR_MASTER_ABORT) - pr_debug("PCIE: %s, signature: %08x\n", err_msg[code], signature); - else - pr_err("PCIE: %s, signature: %08x\n", err_msg[code], signature); - - return IRQ_HANDLED; -} - -static void tegra_pcie_setup_translations(void) -{ - u32 fpci_bar; - u32 size; - u32 axi_address; - - /* Bar 0: config Bar */ - fpci_bar = ((u32)0xfdff << 16); - size = PCIE_CFG_SZ; - axi_address = TEGRA_PCIE_BASE + PCIE_CFG_OFF; - afi_writel(axi_address, AFI_AXI_BAR0_START); - afi_writel(size >> 12, AFI_AXI_BAR0_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR0); - - /* Bar 1: extended config Bar */ - fpci_bar = ((u32)0xfe1 << 20); - size = PCIE_EXT_CFG_SZ; - axi_address = TEGRA_PCIE_BASE + PCIE_EXT_CFG_OFF; - afi_writel(axi_address, AFI_AXI_BAR1_START); - afi_writel(size >> 12, AFI_AXI_BAR1_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR1); - - /* Bar 2: downstream IO bar */ - fpci_bar = ((__u32)0xfdfc << 16); - size = SZ_128K; - axi_address = TEGRA_PCIE_IO_BASE; - afi_writel(axi_address, AFI_AXI_BAR2_START); - afi_writel(size >> 12, AFI_AXI_BAR2_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR2); - - /* Bar 3: prefetchable memory BAR */ - fpci_bar = (((PREFETCH_MEM_BASE_0 >> 12) & 0x0fffffff) << 4) | 0x1; - size = PREFETCH_MEM_SIZE_0 + PREFETCH_MEM_SIZE_1; - axi_address = PREFETCH_MEM_BASE_0; - afi_writel(axi_address, AFI_AXI_BAR3_START); - afi_writel(size >> 12, AFI_AXI_BAR3_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR3); - - /* Bar 4: non prefetchable memory BAR */ - fpci_bar = (((MEM_BASE_0 >> 12) & 0x0FFFFFFF) << 4) | 0x1; - size = MEM_SIZE_0 + MEM_SIZE_1; - axi_address = MEM_BASE_0; - afi_writel(axi_address, AFI_AXI_BAR4_START); - afi_writel(size >> 12, AFI_AXI_BAR4_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR4); - - /* Bar 5: NULL out the remaining BAR as it is not used */ - fpci_bar = 0; - size = 0; - axi_address = 0; - afi_writel(axi_address, AFI_AXI_BAR5_START); - afi_writel(size >> 12, AFI_AXI_BAR5_SZ); - afi_writel(fpci_bar, AFI_FPCI_BAR5); - - /* map all upstream transactions as uncached */ - afi_writel(PHYS_OFFSET, AFI_CACHE_BAR0_ST); - afi_writel(0, AFI_CACHE_BAR0_SZ); - afi_writel(0, AFI_CACHE_BAR1_ST); - afi_writel(0, AFI_CACHE_BAR1_SZ); - - /* No MSI */ - afi_writel(0, AFI_MSI_FPCI_BAR_ST); - afi_writel(0, AFI_MSI_BAR_SZ); - afi_writel(0, AFI_MSI_AXI_BAR_ST); - afi_writel(0, AFI_MSI_BAR_SZ); -} - -static int tegra_pcie_enable_controller(void) -{ - u32 val, reg; - int i, timeout; - - /* Enable slot clock and pulse the reset signals */ - for (i = 0, reg = AFI_PEX0_CTRL; i < 2; i++, reg += 0x8) { - val = afi_readl(reg) | AFI_PEX_CTRL_REFCLK_EN; - afi_writel(val, reg); - val &= ~AFI_PEX_CTRL_RST; - afi_writel(val, reg); - - val = afi_readl(reg) | AFI_PEX_CTRL_RST; - afi_writel(val, reg); - } - - /* Enable dual controller and both ports */ - val = afi_readl(AFI_PCIE_CONFIG); - val &= ~(AFI_PCIE_CONFIG_PCIEC0_DISABLE_DEVICE | - AFI_PCIE_CONFIG_PCIEC1_DISABLE_DEVICE | - AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_MASK); - val |= AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_DUAL; - afi_writel(val, AFI_PCIE_CONFIG); - - val = afi_readl(AFI_FUSE) & ~AFI_FUSE_PCIE_T0_GEN2_DIS; - afi_writel(val, AFI_FUSE); - - /* Initialze internal PHY, enable up to 16 PCIE lanes */ - pads_writel(0x0, PADS_CTL_SEL); - - /* override IDDQ to 1 on all 4 lanes */ - val = pads_readl(PADS_CTL) | PADS_CTL_IDDQ_1L; - pads_writel(val, PADS_CTL); - - /* - * set up PHY PLL inputs select PLLE output as refclock, - * set TX ref sel to div10 (not div5) - */ - val = pads_readl(PADS_PLL_CTL); - val &= ~(PADS_PLL_CTL_REFCLK_MASK | PADS_PLL_CTL_TXCLKREF_MASK); - val |= (PADS_PLL_CTL_REFCLK_INTERNAL_CML | PADS_PLL_CTL_TXCLKREF_DIV10); - pads_writel(val, PADS_PLL_CTL); - - /* take PLL out of reset */ - val = pads_readl(PADS_PLL_CTL) | PADS_PLL_CTL_RST_B4SM; - pads_writel(val, PADS_PLL_CTL); - - /* - * Hack, set the clock voltage to the DEFAULT provided by hw folks. - * This doesn't exist in the documentation - */ - pads_writel(0xfa5cfa5c, 0xc8); - - /* Wait for the PLL to lock */ - timeout = 300; - do { - val = pads_readl(PADS_PLL_CTL); - usleep_range(1000, 1000); - if (--timeout == 0) { - pr_err("Tegra PCIe error: timeout waiting for PLL\n"); - return -EBUSY; - } - } while (!(val & PADS_PLL_CTL_LOCKDET)); - - /* turn off IDDQ override */ - val = pads_readl(PADS_CTL) & ~PADS_CTL_IDDQ_1L; - pads_writel(val, PADS_CTL); - - /* enable TX/RX data */ - val = pads_readl(PADS_CTL); - val |= (PADS_CTL_TX_DATA_EN_1L | PADS_CTL_RX_DATA_EN_1L); - pads_writel(val, PADS_CTL); - - /* Take the PCIe interface module out of reset */ - tegra_periph_reset_deassert(tegra_pcie.pcie_xclk); - - /* Finally enable PCIe */ - val = afi_readl(AFI_CONFIGURATION) | AFI_CONFIGURATION_EN_FPCI; - afi_writel(val, AFI_CONFIGURATION); - - val = (AFI_INTR_EN_INI_SLVERR | AFI_INTR_EN_INI_DECERR | - AFI_INTR_EN_TGT_SLVERR | AFI_INTR_EN_TGT_DECERR | - AFI_INTR_EN_TGT_WRERR | AFI_INTR_EN_DFPCI_DECERR); - afi_writel(val, AFI_AFI_INTR_ENABLE); - afi_writel(0xffffffff, AFI_SM_INTR_ENABLE); - - /* FIXME: No MSI for now, only INT */ - afi_writel(AFI_INTR_MASK_INT_MASK, AFI_INTR_MASK); - - /* Disable all execptions */ - afi_writel(0, AFI_FPCI_ERROR_MASKS); - - return 0; -} - -static void tegra_pcie_xclk_clamp(bool clamp) -{ - u32 reg; - - reg = pmc_readl(PMC_SCRATCH42) & ~PMC_SCRATCH42_PCX_CLAMP; - - if (clamp) - reg |= PMC_SCRATCH42_PCX_CLAMP; - - pmc_writel(reg, PMC_SCRATCH42); -} - -static void tegra_pcie_power_off(void) -{ - tegra_periph_reset_assert(tegra_pcie.pcie_xclk); - tegra_periph_reset_assert(tegra_pcie.afi_clk); - tegra_periph_reset_assert(tegra_pcie.pex_clk); - - tegra_powergate_power_off(TEGRA_POWERGATE_PCIE); - tegra_pcie_xclk_clamp(true); -} - -static int tegra_pcie_power_regate(void) -{ - int err; - - tegra_pcie_power_off(); - - tegra_pcie_xclk_clamp(true); - - tegra_periph_reset_assert(tegra_pcie.pcie_xclk); - tegra_periph_reset_assert(tegra_pcie.afi_clk); - - err = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_PCIE, - tegra_pcie.pex_clk); - if (err) { - pr_err("PCIE: powerup sequence failed: %d\n", err); - return err; - } - - tegra_periph_reset_deassert(tegra_pcie.afi_clk); - - tegra_pcie_xclk_clamp(false); - - clk_prepare_enable(tegra_pcie.afi_clk); - clk_prepare_enable(tegra_pcie.pex_clk); - return clk_prepare_enable(tegra_pcie.pll_e); -} - -static int tegra_pcie_clocks_get(void) -{ - int err; - - tegra_pcie.pex_clk = clk_get(NULL, "pex"); - if (IS_ERR(tegra_pcie.pex_clk)) - return PTR_ERR(tegra_pcie.pex_clk); - - tegra_pcie.afi_clk = clk_get(NULL, "afi"); - if (IS_ERR(tegra_pcie.afi_clk)) { - err = PTR_ERR(tegra_pcie.afi_clk); - goto err_afi_clk; - } - - tegra_pcie.pcie_xclk = clk_get(NULL, "pcie_xclk"); - if (IS_ERR(tegra_pcie.pcie_xclk)) { - err = PTR_ERR(tegra_pcie.pcie_xclk); - goto err_pcie_xclk; - } - - tegra_pcie.pll_e = clk_get_sys(NULL, "pll_e"); - if (IS_ERR(tegra_pcie.pll_e)) { - err = PTR_ERR(tegra_pcie.pll_e); - goto err_pll_e; - } - - return 0; - -err_pll_e: - clk_put(tegra_pcie.pcie_xclk); -err_pcie_xclk: - clk_put(tegra_pcie.afi_clk); -err_afi_clk: - clk_put(tegra_pcie.pex_clk); - - return err; -} - -static void tegra_pcie_clocks_put(void) -{ - clk_put(tegra_pcie.pll_e); - clk_put(tegra_pcie.pcie_xclk); - clk_put(tegra_pcie.afi_clk); - clk_put(tegra_pcie.pex_clk); -} - -static int __init tegra_pcie_get_resources(void) -{ - int err; - - err = tegra_pcie_clocks_get(); - if (err) { - pr_err("PCIE: failed to get clocks: %d\n", err); - return err; - } - - err = tegra_pcie_power_regate(); - if (err) { - pr_err("PCIE: failed to power up: %d\n", err); - goto err_pwr_on; - } - - tegra_pcie.regs = ioremap_nocache(TEGRA_PCIE_BASE, PCIE_IOMAP_SZ); - if (tegra_pcie.regs == NULL) { - pr_err("PCIE: Failed to map PCI/AFI registers\n"); - err = -ENOMEM; - goto err_map_reg; - } - - err = request_irq(INT_PCIE_INTR, tegra_pcie_isr, - IRQF_SHARED, "PCIE", &tegra_pcie); - if (err) { - pr_err("PCIE: Failed to register IRQ: %d\n", err); - goto err_req_io; - } - set_irq_flags(INT_PCIE_INTR, IRQF_VALID); - - return 0; - -err_req_io: - iounmap(tegra_pcie.regs); -err_map_reg: - tegra_pcie_power_off(); -err_pwr_on: - tegra_pcie_clocks_put(); - - return err; -} - -/* - * FIXME: If there are no PCIe cards attached, then calling this function - * can result in the increase of the bootup time as there are big timeout - * loops. - */ -#define TEGRA_PCIE_LINKUP_TIMEOUT 200 /* up to 1.2 seconds */ -static bool tegra_pcie_check_link(struct tegra_pcie_port *pp, int idx, - u32 reset_reg) -{ - u32 reg; - int retries = 3; - int timeout; - - do { - timeout = TEGRA_PCIE_LINKUP_TIMEOUT; - while (timeout) { - reg = readl(pp->base + RP_VEND_XP); - - if (reg & RP_VEND_XP_DL_UP) - break; - - mdelay(1); - timeout--; - } - - if (!timeout) { - pr_err("PCIE: port %d: link down, retrying\n", idx); - goto retry; - } - - timeout = TEGRA_PCIE_LINKUP_TIMEOUT; - while (timeout) { - reg = readl(pp->base + RP_LINK_CONTROL_STATUS); - - if (reg & 0x20000000) - return true; - - mdelay(1); - timeout--; - } - -retry: - /* Pulse the PEX reset */ - reg = afi_readl(reset_reg) | AFI_PEX_CTRL_RST; - afi_writel(reg, reset_reg); - mdelay(1); - reg = afi_readl(reset_reg) & ~AFI_PEX_CTRL_RST; - afi_writel(reg, reset_reg); - - retries--; - } while (retries); - - return false; -} - -static void __init tegra_pcie_add_port(int index, u32 offset, u32 reset_reg) -{ - struct tegra_pcie_port *pp; - - pp = tegra_pcie.port + tegra_pcie.num_ports; - - pp->index = -1; - pp->base = tegra_pcie.regs + offset; - pp->link_up = tegra_pcie_check_link(pp, index, reset_reg); - - if (!pp->link_up) { - pp->base = NULL; - printk(KERN_INFO "PCIE: port %d: link down, ignoring\n", index); - return; - } - - tegra_pcie.num_ports++; - pp->index = index; - pp->root_bus_nr = -1; - memset(pp->res, 0, sizeof(pp->res)); -} - -int __init tegra_pcie_init(bool init_port0, bool init_port1) -{ - int err; - - if (!(init_port0 || init_port1)) - return -ENODEV; - - pcibios_min_mem = 0; - - err = tegra_pcie_get_resources(); - if (err) - return err; - - err = tegra_pcie_enable_controller(); - if (err) - return err; - - /* setup the AFI address translations */ - tegra_pcie_setup_translations(); - - if (init_port0) - tegra_pcie_add_port(0, RP0_OFFSET, AFI_PEX0_CTRL); - - if (init_port1) - tegra_pcie_add_port(1, RP1_OFFSET, AFI_PEX1_CTRL); - - pci_common_init(&tegra_pcie_hw); - - return 0; -} diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 97b33a2a2d75..2d0203627fbb 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -196,6 +196,5 @@ struct smp_operations tegra_smp_ops __initdata = { #ifdef CONFIG_HOTPLUG_CPU .cpu_kill = tegra_cpu_kill, .cpu_die = tegra_cpu_die, - .cpu_disable = tegra_cpu_disable, #endif }; diff --git a/arch/arm/mach-tegra/pm-tegra20.c b/arch/arm/mach-tegra/pm-tegra20.c new file mode 100644 index 000000000000..d65e1d786400 --- /dev/null +++ b/arch/arm/mach-tegra/pm-tegra20.c @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> + +#include "pm.h" + +#ifdef CONFIG_PM_SLEEP +extern u32 tegra20_iram_start, tegra20_iram_end; +extern void tegra20_sleep_core_finish(unsigned long); + +void tegra20_lp1_iram_hook(void) +{ + tegra_lp1_iram.start_addr = &tegra20_iram_start; + tegra_lp1_iram.end_addr = &tegra20_iram_end; +} + +void tegra20_sleep_core_init(void) +{ + tegra_sleep_core_finish = tegra20_sleep_core_finish; +} +#endif diff --git a/arch/arm/mach-tegra/pm-tegra30.c b/arch/arm/mach-tegra/pm-tegra30.c new file mode 100644 index 000000000000..8fa326d6ff1a --- /dev/null +++ b/arch/arm/mach-tegra/pm-tegra30.c @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> + +#include "pm.h" + +#ifdef CONFIG_PM_SLEEP +extern u32 tegra30_iram_start, tegra30_iram_end; +extern void tegra30_sleep_core_finish(unsigned long); + +void tegra30_lp1_iram_hook(void) +{ + tegra_lp1_iram.start_addr = &tegra30_iram_start; + tegra_lp1_iram.end_addr = &tegra30_iram_end; +} + +void tegra30_sleep_core_init(void) +{ + tegra_sleep_core_finish = tegra30_sleep_core_finish; +} +#endif diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c index 261fec140c06..ed294a04e1d3 100644 --- a/arch/arm/mach-tegra/pm.c +++ b/arch/arm/mach-tegra/pm.c @@ -37,12 +37,18 @@ #include "reset.h" #include "flowctrl.h" #include "fuse.h" +#include "pm.h" #include "pmc.h" #include "sleep.h" #ifdef CONFIG_PM_SLEEP static DEFINE_SPINLOCK(tegra_lp2_lock); +static u32 iram_save_size; +static void *iram_save_addr; +struct tegra_lp1_iram tegra_lp1_iram; void (*tegra_tear_down_cpu)(void); +void (*tegra_sleep_core_finish)(unsigned long v2p); +static int (*tegra_sleep_func)(unsigned long v2p); static void tegra_tear_down_cpu_init(void) { @@ -52,7 +58,9 @@ static void tegra_tear_down_cpu_init(void) tegra_tear_down_cpu = tegra20_tear_down_cpu; break; case TEGRA30: - if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC)) + case TEGRA114: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) tegra_tear_down_cpu = tegra30_tear_down_cpu; break; } @@ -171,19 +179,109 @@ void tegra_idle_lp2_last(void) enum tegra_suspend_mode tegra_pm_validate_suspend_mode( enum tegra_suspend_mode mode) { - /* Tegra114 didn't support any suspending mode yet. */ - if (tegra_chip_id == TEGRA114) - return TEGRA_SUSPEND_NONE; - /* - * The Tegra devices only support suspending to LP2 currently. + * The Tegra devices support suspending to LP1 or lower currently. */ - if (mode > TEGRA_SUSPEND_LP2) - return TEGRA_SUSPEND_LP2; + if (mode > TEGRA_SUSPEND_LP1) + return TEGRA_SUSPEND_LP1; return mode; } +static int tegra_sleep_core(unsigned long v2p) +{ + setup_mm_for_reboot(); + tegra_sleep_core_finish(v2p); + + /* should never here */ + BUG(); + + return 0; +} + +/* + * tegra_lp1_iram_hook + * + * Hooking the address of LP1 reset vector and SDRAM self-refresh code in + * SDRAM. These codes not be copied to IRAM in this fuction. We need to + * copy these code to IRAM before LP0/LP1 suspend and restore the content + * of IRAM after resume. + */ +static bool tegra_lp1_iram_hook(void) +{ + switch (tegra_chip_id) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_lp1_iram_hook(); + break; + case TEGRA30: + case TEGRA114: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) + tegra30_lp1_iram_hook(); + break; + default: + break; + } + + if (!tegra_lp1_iram.start_addr || !tegra_lp1_iram.end_addr) + return false; + + iram_save_size = tegra_lp1_iram.end_addr - tegra_lp1_iram.start_addr; + iram_save_addr = kmalloc(iram_save_size, GFP_KERNEL); + if (!iram_save_addr) + return false; + + return true; +} + +static bool tegra_sleep_core_init(void) +{ + switch (tegra_chip_id) { + case TEGRA20: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) + tegra20_sleep_core_init(); + break; + case TEGRA30: + case TEGRA114: + if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) || + IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC)) + tegra30_sleep_core_init(); + break; + default: + break; + } + + if (!tegra_sleep_core_finish) + return false; + + return true; +} + +static void tegra_suspend_enter_lp1(void) +{ + tegra_pmc_suspend(); + + /* copy the reset vector & SDRAM shutdown code into IRAM */ + memcpy(iram_save_addr, IO_ADDRESS(TEGRA_IRAM_CODE_AREA), + iram_save_size); + memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), tegra_lp1_iram.start_addr, + iram_save_size); + + *((u32 *)tegra_cpu_lp1_mask) = 1; +} + +static void tegra_suspend_exit_lp1(void) +{ + tegra_pmc_resume(); + + /* restore IRAM */ + memcpy(IO_ADDRESS(TEGRA_IRAM_CODE_AREA), iram_save_addr, + iram_save_size); + + *(u32 *)tegra_cpu_lp1_mask = 0; +} + static const char *lp_state[TEGRA_MAX_SUSPEND_MODE] = { [TEGRA_SUSPEND_NONE] = "none", [TEGRA_SUSPEND_LP2] = "LP2", @@ -207,6 +305,9 @@ static int tegra_suspend_enter(suspend_state_t state) suspend_cpu_complex(); switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_suspend_enter_lp1(); + break; case TEGRA_SUSPEND_LP2: tegra_set_cpu_in_lp2(); break; @@ -214,9 +315,12 @@ static int tegra_suspend_enter(suspend_state_t state) break; } - cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu); + cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, tegra_sleep_func); switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_suspend_exit_lp1(); + break; case TEGRA_SUSPEND_LP2: tegra_clear_cpu_in_lp2(); break; @@ -237,12 +341,36 @@ static const struct platform_suspend_ops tegra_suspend_ops = { void __init tegra_init_suspend(void) { - if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NONE) + enum tegra_suspend_mode mode = tegra_pmc_get_suspend_mode(); + + if (mode == TEGRA_SUSPEND_NONE) return; tegra_tear_down_cpu_init(); tegra_pmc_suspend_init(); + if (mode >= TEGRA_SUSPEND_LP1) { + if (!tegra_lp1_iram_hook() || !tegra_sleep_core_init()) { + pr_err("%s: unable to allocate memory for SDRAM" + "self-refresh -- LP0/LP1 unavailable\n", + __func__); + tegra_pmc_set_suspend_mode(TEGRA_SUSPEND_LP2); + mode = TEGRA_SUSPEND_LP2; + } + } + + /* set up sleep function for cpu_suspend */ + switch (mode) { + case TEGRA_SUSPEND_LP1: + tegra_sleep_func = tegra_sleep_core; + break; + case TEGRA_SUSPEND_LP2: + tegra_sleep_func = tegra_sleep_cpu; + break; + default: + break; + } + suspend_set_ops(&tegra_suspend_ops); } #endif diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 94c4b9d9077c..fe204e5256e7 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -23,6 +23,18 @@ #include "pmc.h" +struct tegra_lp1_iram { + void *start_addr; + void *end_addr; +}; +extern struct tegra_lp1_iram tegra_lp1_iram; +extern void (*tegra_sleep_core_finish)(unsigned long v2p); + +void tegra20_lp1_iram_hook(void); +void tegra20_sleep_core_init(void); +void tegra30_lp1_iram_hook(void); +void tegra30_sleep_core_init(void); + extern unsigned long l2x0_saved_regs_addr; void save_cpu_arch_register(void); diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index eb3fa4aee0e4..8acb881f7cfe 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -21,11 +21,14 @@ #include <linux/of.h> #include <linux/of_address.h> +#include "flowctrl.h" #include "fuse.h" #include "pm.h" #include "pmc.h" #include "sleep.h" +#define TEGRA_POWER_SYSCLK_POLARITY (1 << 10) /* sys clk polarity */ +#define TEGRA_POWER_SYSCLK_OE (1 << 11) /* system clock enable */ #define TEGRA_POWER_EFFECT_LP0 (1 << 14) /* LP0 when CPU pwr gated */ #define TEGRA_POWER_CPU_PWRREQ_POLARITY (1 << 15) /* CPU pwr req polarity */ #define TEGRA_POWER_CPU_PWRREQ_OE (1 << 16) /* CPU pwr req enable */ @@ -193,16 +196,50 @@ enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void) return pmc_pm_data.suspend_mode; } +void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode) +{ + if (mode < TEGRA_SUSPEND_NONE || mode >= TEGRA_MAX_SUSPEND_MODE) + return; + + pmc_pm_data.suspend_mode = mode; +} + +void tegra_pmc_suspend(void) +{ + tegra_pmc_writel(virt_to_phys(tegra_resume), PMC_SCRATCH41); +} + +void tegra_pmc_resume(void) +{ + tegra_pmc_writel(0x0, PMC_SCRATCH41); +} + void tegra_pmc_pm_set(enum tegra_suspend_mode mode) { - u32 reg; + u32 reg, csr_reg; unsigned long rate = 0; reg = tegra_pmc_readl(PMC_CTRL); reg |= TEGRA_POWER_CPU_PWRREQ_OE; reg &= ~TEGRA_POWER_EFFECT_LP0; + switch (tegra_chip_id) { + case TEGRA20: + case TEGRA30: + break; + default: + /* Turn off CRAIL */ + csr_reg = flowctrl_read_cpu_csr(0); + csr_reg &= ~FLOW_CTRL_CSR_ENABLE_EXT_MASK; + csr_reg |= FLOW_CTRL_CSR_ENABLE_EXT_CRAIL; + flowctrl_write_cpu_csr(0, csr_reg); + break; + } + switch (mode) { + case TEGRA_SUSPEND_LP1: + rate = 32768; + break; case TEGRA_SUSPEND_LP2: rate = clk_get_rate(tegra_pclk); break; @@ -224,6 +261,20 @@ void tegra_pmc_suspend_init(void) reg = tegra_pmc_readl(PMC_CTRL); reg |= TEGRA_POWER_CPU_PWRREQ_OE; tegra_pmc_writel(reg, PMC_CTRL); + + reg = tegra_pmc_readl(PMC_CTRL); + + if (!pmc_pm_data.sysclkreq_high) + reg |= TEGRA_POWER_SYSCLK_POLARITY; + else + reg &= ~TEGRA_POWER_SYSCLK_POLARITY; + + /* configure the output polarity while the request is tristated */ + tegra_pmc_writel(reg, PMC_CTRL); + + /* now enable the request */ + reg |= TEGRA_POWER_SYSCLK_OE; + tegra_pmc_writel(reg, PMC_CTRL); } #endif diff --git a/arch/arm/mach-tegra/pmc.h b/arch/arm/mach-tegra/pmc.h index e1c2df272f7d..549f8c7b762c 100644 --- a/arch/arm/mach-tegra/pmc.h +++ b/arch/arm/mach-tegra/pmc.h @@ -28,6 +28,9 @@ enum tegra_suspend_mode { #ifdef CONFIG_PM_SLEEP enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void); +void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode); +void tegra_pmc_suspend(void); +void tegra_pmc_resume(void); void tegra_pmc_pm_set(enum tegra_suspend_mode mode); void tegra_pmc_suspend_init(void); #endif diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S index 39dc9e7834f3..f527b2c2dea7 100644 --- a/arch/arm/mach-tegra/reset-handler.S +++ b/arch/arm/mach-tegra/reset-handler.S @@ -40,9 +40,12 @@ * re-enabling sdram. * * r6: SoC ID + * r8: CPU part number */ ENTRY(tegra_resume) - bl v7_invalidate_l1 + check_cpu_part_num 0xc09, r8, r9 + bleq v7_invalidate_l1 + blne tegra_init_l2_for_a15 cpu_id r0 tegra_get_soc_id TEGRA_APB_MISC_BASE, r6 @@ -70,7 +73,8 @@ no_cpu0_chk: str r1, [r2] 1: - check_cpu_part_num 0xc09, r8, r9 + mov32 r9, 0xc09 + cmp r8, r9 bne not_ca9 #ifdef CONFIG_HAVE_ARM_SCU /* enable SCU */ @@ -178,6 +182,19 @@ after_errata: 1: #endif + /* Waking up from LP1? */ + ldr r8, [r12, #RESET_DATA(MASK_LP1)] + tst r8, r11 @ if in_lp1 + beq __is_not_lp1 + cmp r10, #0 + bne __die @ only CPU0 can be here + ldr lr, [r12, #RESET_DATA(STARTUP_LP1)] + cmp lr, #0 + bleq __die @ no LP1 startup handler + THUMB( add lr, lr, #1 ) @ switch to Thumb mode + bx lr +__is_not_lp1: + /* Waking up from LP2? */ ldr r9, [r12, #RESET_DATA(MASK_LP2)] tst r9, r11 @ if in_lp2 diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 1ac434e0068f..fd0bbf8a6c94 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -81,6 +81,8 @@ void __init tegra_cpu_reset_handler_init(void) #endif #ifdef CONFIG_PM_SLEEP + __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP1] = + TEGRA_IRAM_CODE_AREA; __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_LP2] = virt_to_phys((void *)tegra_resume); #endif diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index c90d8e9c4ad2..76a93434c6ee 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -39,6 +39,10 @@ void __tegra_cpu_reset_handler_end(void); void tegra_secondary_startup(void); #ifdef CONFIG_PM_SLEEP +#define tegra_cpu_lp1_mask \ + (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ + ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP1] - \ + (u32)__tegra_cpu_reset_handler_start))) #define tegra_cpu_lp2_mask \ (IO_ADDRESS(TEGRA_IRAM_BASE + TEGRA_IRAM_RESET_HANDLER_OFFSET + \ ((u32)&__tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_LP2] - \ diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index e3f2417c420e..5c3bd11c9838 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -23,10 +23,49 @@ #include <asm/assembler.h> #include <asm/proc-fns.h> #include <asm/cp15.h> +#include <asm/cache.h> #include "sleep.h" #include "flowctrl.h" +#define EMC_CFG 0xc +#define EMC_ADR_CFG 0x10 +#define EMC_REFRESH 0x70 +#define EMC_NOP 0xdc +#define EMC_SELF_REF 0xe0 +#define EMC_REQ_CTRL 0x2b0 +#define EMC_EMC_STATUS 0x2b4 + +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 +#define CLK_RESET_SCLK_BURST 0x28 +#define CLK_RESET_SCLK_DIVIDER 0x2c +#define CLK_RESET_PLLC_BASE 0x80 +#define CLK_RESET_PLLM_BASE 0x90 +#define CLK_RESET_PLLP_BASE 0xa0 + +#define APB_MISC_XM2CFGCPADCTRL 0x8c8 +#define APB_MISC_XM2CFGDPADCTRL 0x8cc +#define APB_MISC_XM2CLKCFGPADCTRL 0x8d0 +#define APB_MISC_XM2COMPPADCTRL 0x8d4 +#define APB_MISC_XM2VTTGENPADCTRL 0x8d8 +#define APB_MISC_XM2CFGCPADCTRL2 0x8e4 +#define APB_MISC_XM2CFGDPADCTRL2 0x8e8 + +.macro pll_enable, rd, r_car_base, pll_base + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 30) + orreq \rd, \rd, #(1 << 30) + streq \rd, [\r_car_base, #\pll_base] +.endm + +.macro emc_device_mask, rd, base + ldr \rd, [\base, #EMC_ADR_CFG] + tst \rd, #(0x3 << 24) + moveq \rd, #(0x1 << 8) @ just 1 device + movne \rd, #(0x3 << 8) @ 2 devices +.endm + #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) /* * tegra20_hotplug_shutdown(void) @@ -181,6 +220,28 @@ ENTRY(tegra20_cpu_is_resettable_soon) ENDPROC(tegra20_cpu_is_resettable_soon) /* + * tegra20_sleep_core_finish(unsigned long v2p) + * + * Enters suspend in LP0 or LP1 by turning off the mmu and jumping to + * tegra20_tear_down_core in IRAM + */ +ENTRY(tegra20_sleep_core_finish) + /* Flush, disable the L1 data cache and exit SMP */ + bl tegra_disable_clean_inv_dcache + + mov32 r3, tegra_shut_off_mmu + add r3, r3, r0 + + mov32 r0, tegra20_tear_down_core + mov32 r1, tegra20_iram_start + sub r0, r0, r1 + mov32 r1, TEGRA_IRAM_CODE_AREA + add r0, r0, r1 + + mov pc, r3 +ENDPROC(tegra20_sleep_core_finish) + +/* * tegra20_sleep_cpu_secondary_finish(unsigned long v2p) * * Enters WFI on secondary CPU by exiting coherency. @@ -191,6 +252,7 @@ ENTRY(tegra20_sleep_cpu_secondary_finish) mrc p15, 0, r11, c1, c0, 1 @ save actlr before exiting coherency /* Flush and disable the L1 data cache */ + mov r0, #TEGRA_FLUSH_CACHE_LOUIS bl tegra_disable_clean_inv_dcache mov32 r0, TEGRA_PMC_VIRT + PMC_SCRATCH41 @@ -250,6 +312,150 @@ ENTRY(tegra20_tear_down_cpu) b tegra20_enter_sleep ENDPROC(tegra20_tear_down_cpu) +/* START OF ROUTINES COPIED TO IRAM */ + .align L1_CACHE_SHIFT + .globl tegra20_iram_start +tegra20_iram_start: + +/* + * tegra20_lp1_reset + * + * reset vector for LP1 restore; copied into IRAM during suspend. + * Brings the system back up to a safe staring point (SDRAM out of + * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLP, + * system clock running on the same PLL that it suspended at), and + * jumps to tegra_resume to restore virtual addressing and PLLX. + * The physical address of tegra_resume expected to be stored in + * PMC_SCRATCH41. + * + * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA. + */ +ENTRY(tegra20_lp1_reset) + /* + * The CPU and system bus are running at 32KHz and executing from + * IRAM when this code is executed; immediately switch to CLKM and + * enable PLLM, PLLP, PLLC. + */ + mov32 r0, TEGRA_CLK_RESET_BASE + + mov r1, #(1 << 28) + str r1, [r0, #CLK_RESET_SCLK_BURST] + str r1, [r0, #CLK_RESET_CCLK_BURST] + mov r1, #0 + str r1, [r0, #CLK_RESET_CCLK_DIVIDER] + str r1, [r0, #CLK_RESET_SCLK_DIVIDER] + + pll_enable r1, r0, CLK_RESET_PLLM_BASE + pll_enable r1, r0, CLK_RESET_PLLP_BASE + pll_enable r1, r0, CLK_RESET_PLLC_BASE + + adr r2, tegra20_sdram_pad_address + adr r4, tegra20_sdram_pad_save + mov r5, #0 + + ldr r6, tegra20_sdram_pad_size +padload: + ldr r7, [r2, r5] @ r7 is the addr in the pad_address + + ldr r1, [r4, r5] + str r1, [r7] @ restore the value in pad_save + + add r5, r5, #4 + cmp r6, r5 + bne padload + +padload_done: + /* 255uS delay for PLL stabilization */ + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #0xff + wait_until r1, r7, r9 + + adr r4, tegra20_sclk_save + ldr r4, [r4] + str r4, [r0, #CLK_RESET_SCLK_BURST] + mov32 r4, ((1 << 28) | (4)) @ burst policy is PLLP + str r4, [r0, #CLK_RESET_CCLK_BURST] + + mov32 r0, TEGRA_EMC_BASE + ldr r1, [r0, #EMC_CFG] + bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP + str r1, [r0, #EMC_CFG] + + mov r1, #0 + str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh + mov r1, #1 + str r1, [r0, #EMC_NOP] + str r1, [r0, #EMC_NOP] + str r1, [r0, #EMC_REFRESH] + + emc_device_mask r1, r0 + +exit_selfrefresh_loop: + ldr r2, [r0, #EMC_EMC_STATUS] + ands r2, r2, r1 + bne exit_selfrefresh_loop + + mov r1, #0 @ unstall all transactions + str r1, [r0, #EMC_REQ_CTRL] + + mov32 r0, TEGRA_PMC_BASE + ldr r0, [r0, #PMC_SCRATCH41] + mov pc, r0 @ jump to tegra_resume +ENDPROC(tegra20_lp1_reset) + +/* + * tegra20_tear_down_core + * + * copied into and executed from IRAM + * puts memory in self-refresh for LP0 and LP1 + */ +tegra20_tear_down_core: + bl tegra20_sdram_self_refresh + bl tegra20_switch_cpu_to_clk32k + b tegra20_enter_sleep + +/* + * tegra20_switch_cpu_to_clk32k + * + * In LP0 and LP1 all PLLs will be turned off. Switch the CPU and system clock + * to the 32KHz clock. + */ +tegra20_switch_cpu_to_clk32k: + /* + * start by switching to CLKM to safely disable PLLs, then switch to + * CLKS. + */ + mov r0, #(1 << 28) + str r0, [r5, #CLK_RESET_SCLK_BURST] + str r0, [r5, #CLK_RESET_CCLK_BURST] + mov r0, #0 + str r0, [r5, #CLK_RESET_CCLK_DIVIDER] + str r0, [r5, #CLK_RESET_SCLK_DIVIDER] + + /* 2uS delay delay between changing SCLK and disabling PLLs */ + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r9 + + /* disable PLLM, PLLP and PLLC */ + ldr r0, [r5, #CLK_RESET_PLLM_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLM_BASE] + ldr r0, [r5, #CLK_RESET_PLLP_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLP_BASE] + ldr r0, [r5, #CLK_RESET_PLLC_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLC_BASE] + + /* switch to CLKS */ + mov r0, #0 /* brust policy = 32KHz */ + str r0, [r5, #CLK_RESET_SCLK_BURST] + + mov pc, lr + /* * tegra20_enter_sleep * @@ -274,4 +480,95 @@ halted: isb b halted +/* + * tegra20_sdram_self_refresh + * + * called with MMU off and caches disabled + * puts sdram in self refresh + * must be executed from IRAM + */ +tegra20_sdram_self_refresh: + mov32 r1, TEGRA_EMC_BASE @ r1 reserved for emc base addr + + mov r2, #3 + str r2, [r1, #EMC_REQ_CTRL] @ stall incoming DRAM requests + +emcidle: + ldr r2, [r1, #EMC_EMC_STATUS] + tst r2, #4 + beq emcidle + + mov r2, #1 + str r2, [r1, #EMC_SELF_REF] + + emc_device_mask r2, r1 + +emcself: + ldr r3, [r1, #EMC_EMC_STATUS] + and r3, r3, r2 + cmp r3, r2 + bne emcself @ loop until DDR in self-refresh + + adr r2, tegra20_sdram_pad_address + adr r3, tegra20_sdram_pad_safe + adr r4, tegra20_sdram_pad_save + mov r5, #0 + + ldr r6, tegra20_sdram_pad_size +padsave: + ldr r0, [r2, r5] @ r0 is the addr in the pad_address + + ldr r1, [r0] + str r1, [r4, r5] @ save the content of the addr + + ldr r1, [r3, r5] + str r1, [r0] @ set the save val to the addr + + add r5, r5, #4 + cmp r6, r5 + bne padsave +padsave_done: + + mov32 r5, TEGRA_CLK_RESET_BASE + ldr r0, [r5, #CLK_RESET_SCLK_BURST] + adr r2, tegra20_sclk_save + str r0, [r2] + dsb + mov pc, lr + +tegra20_sdram_pad_address: + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CLKCFGPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2COMPPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2VTTGENPADCTRL + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGCPADCTRL2 + .word TEGRA_APB_MISC_BASE + APB_MISC_XM2CFGDPADCTRL2 + +tegra20_sdram_pad_size: + .word tegra20_sdram_pad_size - tegra20_sdram_pad_address + +tegra20_sdram_pad_safe: + .word 0x8 + .word 0x8 + .word 0x0 + .word 0x8 + .word 0x5500 + .word 0x08080040 + .word 0x0 + +tegra20_sclk_save: + .word 0x0 + +tegra20_sdram_pad_save: + .rept (tegra20_sdram_pad_size - tegra20_sdram_pad_address) / 4 + .long 0 + .endr + + .ltorg +/* dummy symbol for end of IRAM */ + .align L1_CACHE_SHIFT + .globl tegra20_iram_end +tegra20_iram_end: + b . #endif diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index ada8821b48be..63fa91b5fafb 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -18,13 +18,118 @@ #include <asm/assembler.h> #include <asm/asm-offsets.h> +#include <asm/cache.h> #include "fuse.h" #include "sleep.h" #include "flowctrl.h" +#define EMC_CFG 0xc +#define EMC_ADR_CFG 0x10 +#define EMC_TIMING_CONTROL 0x28 +#define EMC_REFRESH 0x70 +#define EMC_NOP 0xdc +#define EMC_SELF_REF 0xe0 +#define EMC_MRW 0xe8 +#define EMC_FBIO_CFG5 0x104 +#define EMC_AUTO_CAL_CONFIG 0x2a4 +#define EMC_AUTO_CAL_INTERVAL 0x2a8 +#define EMC_AUTO_CAL_STATUS 0x2ac +#define EMC_REQ_CTRL 0x2b0 +#define EMC_CFG_DIG_DLL 0x2bc +#define EMC_EMC_STATUS 0x2b4 +#define EMC_ZCAL_INTERVAL 0x2e0 +#define EMC_ZQ_CAL 0x2ec +#define EMC_XM2VTTGENPADCTRL 0x310 +#define EMC_XM2VTTGENPADCTRL2 0x314 + +#define PMC_CTRL 0x0 +#define PMC_CTRL_SIDE_EFFECT_LP0 (1 << 14) /* enter LP0 when CPU pwr gated */ + +#define PMC_PLLP_WB0_OVERRIDE 0xf8 +#define PMC_IO_DPD_REQ 0x1b8 +#define PMC_IO_DPD_STATUS 0x1bc + +#define CLK_RESET_CCLK_BURST 0x20 +#define CLK_RESET_CCLK_DIVIDER 0x24 +#define CLK_RESET_SCLK_BURST 0x28 +#define CLK_RESET_SCLK_DIVIDER 0x2c + +#define CLK_RESET_PLLC_BASE 0x80 +#define CLK_RESET_PLLC_MISC 0x8c +#define CLK_RESET_PLLM_BASE 0x90 +#define CLK_RESET_PLLM_MISC 0x9c +#define CLK_RESET_PLLP_BASE 0xa0 +#define CLK_RESET_PLLP_MISC 0xac +#define CLK_RESET_PLLA_BASE 0xb0 +#define CLK_RESET_PLLA_MISC 0xbc +#define CLK_RESET_PLLX_BASE 0xe0 +#define CLK_RESET_PLLX_MISC 0xe4 +#define CLK_RESET_PLLX_MISC3 0x518 +#define CLK_RESET_PLLX_MISC3_IDDQ 3 +#define CLK_RESET_PLLM_MISC_IDDQ 5 +#define CLK_RESET_PLLC_MISC_IDDQ 26 + +#define CLK_RESET_CLK_SOURCE_MSELECT 0x3b4 + +#define MSELECT_CLKM (0x3 << 30) + +#define LOCK_DELAY 50 /* safety delay after lock is detected */ + #define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */ +.macro emc_device_mask, rd, base + ldr \rd, [\base, #EMC_ADR_CFG] + tst \rd, #0x1 + moveq \rd, #(0x1 << 8) @ just 1 device + movne \rd, #(0x3 << 8) @ 2 devices +.endm + +.macro emc_timing_update, rd, base + mov \rd, #1 + str \rd, [\base, #EMC_TIMING_CONTROL] +1001: + ldr \rd, [\base, #EMC_EMC_STATUS] + tst \rd, #(0x1<<23) @ wait EMC_STATUS_TIMING_UPDATE_STALLED is clear + bne 1001b +.endm + +.macro pll_enable, rd, r_car_base, pll_base, pll_misc + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 30) + orreq \rd, \rd, #(1 << 30) + streq \rd, [\r_car_base, #\pll_base] + /* Enable lock detector */ + .if \pll_misc + ldr \rd, [\r_car_base, #\pll_misc] + bic \rd, \rd, #(1 << 18) + str \rd, [\r_car_base, #\pll_misc] + ldr \rd, [\r_car_base, #\pll_misc] + ldr \rd, [\r_car_base, #\pll_misc] + orr \rd, \rd, #(1 << 18) + str \rd, [\r_car_base, #\pll_misc] + .endif +.endm + +.macro pll_locked, rd, r_car_base, pll_base +1: + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 27) + beq 1b +.endm + +.macro pll_iddq_exit, rd, car, iddq, iddq_bit + ldr \rd, [\car, #\iddq] + bic \rd, \rd, #(1<<\iddq_bit) + str \rd, [\car, #\iddq] +.endm + +.macro pll_iddq_entry, rd, car, iddq, iddq_bit + ldr \rd, [\car, #\iddq] + orr \rd, \rd, #(1<<\iddq_bit) + str \rd, [\car, #\iddq] +.endm + #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP) /* * tegra30_hotplug_shutdown(void) @@ -99,6 +204,8 @@ flow_ctrl_setting_for_lp2: cmp r10, #TEGRA30 moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2 movne r3, #FLOW_CTRL_WAITEVENT + orrne r3, r3, #FLOW_CTRL_HALT_GIC_IRQ + orrne r3, r3, #FLOW_CTRL_HALT_GIC_FIQ flow_ctrl_done: cmp r10, #TEGRA30 str r3, [r2] @@ -127,6 +234,41 @@ ENDPROC(tegra30_cpu_shutdown) #ifdef CONFIG_PM_SLEEP /* + * tegra30_sleep_core_finish(unsigned long v2p) + * + * Enters suspend in LP0 or LP1 by turning off the MMU and jumping to + * tegra30_tear_down_core in IRAM + */ +ENTRY(tegra30_sleep_core_finish) + /* Flush, disable the L1 data cache and exit SMP */ + bl tegra_disable_clean_inv_dcache + + /* + * Preload all the address literals that are needed for the + * CPU power-gating process, to avoid loading from SDRAM which + * are not supported once SDRAM is put into self-refresh. + * LP0 / LP1 use physical address, since the MMU needs to be + * disabled before putting SDRAM into self-refresh to avoid + * memory access due to page table walks. + */ + mov32 r4, TEGRA_PMC_BASE + mov32 r5, TEGRA_CLK_RESET_BASE + mov32 r6, TEGRA_FLOW_CTRL_BASE + mov32 r7, TEGRA_TMRUS_BASE + + mov32 r3, tegra_shut_off_mmu + add r3, r3, r0 + + mov32 r0, tegra30_tear_down_core + mov32 r1, tegra30_iram_start + sub r0, r0, r1 + mov32 r1, TEGRA_IRAM_CODE_AREA + add r0, r0, r1 + + mov pc, r3 +ENDPROC(tegra30_sleep_core_finish) + +/* * tegra30_sleep_cpu_secondary_finish(unsigned long v2p) * * Enters LP2 on secondary CPU by exiting coherency and powergating the CPU. @@ -135,6 +277,7 @@ ENTRY(tegra30_sleep_cpu_secondary_finish) mov r7, lr /* Flush and disable the L1 data cache */ + mov r0, #TEGRA_FLUSH_CACHE_LOUIS bl tegra_disable_clean_inv_dcache /* Powergate this CPU. */ @@ -155,6 +298,351 @@ ENTRY(tegra30_tear_down_cpu) b tegra30_enter_sleep ENDPROC(tegra30_tear_down_cpu) +/* START OF ROUTINES COPIED TO IRAM */ + .align L1_CACHE_SHIFT + .globl tegra30_iram_start +tegra30_iram_start: + +/* + * tegra30_lp1_reset + * + * reset vector for LP1 restore; copied into IRAM during suspend. + * Brings the system back up to a safe staring point (SDRAM out of + * self-refresh, PLLC, PLLM and PLLP reenabled, CPU running on PLLX, + * system clock running on the same PLL that it suspended at), and + * jumps to tegra_resume to restore virtual addressing. + * The physical address of tegra_resume expected to be stored in + * PMC_SCRATCH41. + * + * NOTE: THIS *MUST* BE RELOCATED TO TEGRA_IRAM_CODE_AREA. + */ +ENTRY(tegra30_lp1_reset) + /* + * The CPU and system bus are running at 32KHz and executing from + * IRAM when this code is executed; immediately switch to CLKM and + * enable PLLP, PLLM, PLLC, PLLA and PLLX. + */ + mov32 r0, TEGRA_CLK_RESET_BASE + + mov r1, #(1 << 28) + str r1, [r0, #CLK_RESET_SCLK_BURST] + str r1, [r0, #CLK_RESET_CCLK_BURST] + mov r1, #0 + str r1, [r0, #CLK_RESET_CCLK_DIVIDER] + str r1, [r0, #CLK_RESET_SCLK_DIVIDER] + + tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 + cmp r10, #TEGRA30 + beq _no_pll_iddq_exit + + pll_iddq_exit r1, r0, CLK_RESET_PLLM_MISC, CLK_RESET_PLLM_MISC_IDDQ + pll_iddq_exit r1, r0, CLK_RESET_PLLC_MISC, CLK_RESET_PLLC_MISC_IDDQ + pll_iddq_exit r1, r0, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ + + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r3 + + /* enable PLLM via PMC */ + mov32 r2, TEGRA_PMC_BASE + ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + orr r1, r1, #(1 << 12) + str r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + + pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0 + pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0 + pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0 + + b _pll_m_c_x_done + +_no_pll_iddq_exit: + /* enable PLLM via PMC */ + mov32 r2, TEGRA_PMC_BASE + ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + orr r1, r1, #(1 << 12) + str r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + + pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC + pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC + pll_enable r1, r0, CLK_RESET_PLLX_BASE, CLK_RESET_PLLX_MISC + +_pll_m_c_x_done: + pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC + pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC + + pll_locked r1, r0, CLK_RESET_PLLM_BASE + pll_locked r1, r0, CLK_RESET_PLLP_BASE + pll_locked r1, r0, CLK_RESET_PLLA_BASE + pll_locked r1, r0, CLK_RESET_PLLC_BASE + pll_locked r1, r0, CLK_RESET_PLLX_BASE + + mov32 r7, TEGRA_TMRUS_BASE + ldr r1, [r7] + add r1, r1, #LOCK_DELAY + wait_until r1, r7, r3 + + adr r5, tegra30_sdram_pad_save + + ldr r4, [r5, #0x18] @ restore CLK_SOURCE_MSELECT + str r4, [r0, #CLK_RESET_CLK_SOURCE_MSELECT] + + ldr r4, [r5, #0x1C] @ restore SCLK_BURST + str r4, [r0, #CLK_RESET_SCLK_BURST] + + cmp r10, #TEGRA30 + movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX + movteq r4, #:upper16:((1 << 28) | (0x8)) + movwne r4, #:lower16:((1 << 28) | (0xe)) + movtne r4, #:upper16:((1 << 28) | (0xe)) + str r4, [r0, #CLK_RESET_CCLK_BURST] + + /* Restore pad power state to normal */ + ldr r1, [r5, #0x14] @ PMC_IO_DPD_STATUS + mvn r1, r1 + bic r1, r1, #(1 << 31) + orr r1, r1, #(1 << 30) + str r1, [r2, #PMC_IO_DPD_REQ] @ DPD_OFF + + cmp r10, #TEGRA30 + movweq r0, #:lower16:TEGRA_EMC_BASE @ r0 reserved for emc base + movteq r0, #:upper16:TEGRA_EMC_BASE + movwne r0, #:lower16:TEGRA_EMC0_BASE + movtne r0, #:upper16:TEGRA_EMC0_BASE + +exit_self_refresh: + ldr r1, [r5, #0xC] @ restore EMC_XM2VTTGENPADCTRL + str r1, [r0, #EMC_XM2VTTGENPADCTRL] + ldr r1, [r5, #0x10] @ restore EMC_XM2VTTGENPADCTRL2 + str r1, [r0, #EMC_XM2VTTGENPADCTRL2] + ldr r1, [r5, #0x8] @ restore EMC_AUTO_CAL_INTERVAL + str r1, [r0, #EMC_AUTO_CAL_INTERVAL] + + /* Relock DLL */ + ldr r1, [r0, #EMC_CFG_DIG_DLL] + orr r1, r1, #(1 << 30) @ set DLL_RESET + str r1, [r0, #EMC_CFG_DIG_DLL] + + emc_timing_update r1, r0 + + cmp r10, #TEGRA114 + movweq r1, #:lower16:TEGRA_EMC1_BASE + movteq r1, #:upper16:TEGRA_EMC1_BASE + cmpeq r0, r1 + + ldr r1, [r0, #EMC_AUTO_CAL_CONFIG] + orr r1, r1, #(1 << 31) @ set AUTO_CAL_ACTIVE + orreq r1, r1, #(1 << 27) @ set slave mode for channel 1 + str r1, [r0, #EMC_AUTO_CAL_CONFIG] + +emc_wait_auto_cal_onetime: + ldr r1, [r0, #EMC_AUTO_CAL_STATUS] + tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared + bne emc_wait_auto_cal_onetime + + ldr r1, [r0, #EMC_CFG] + bic r1, r1, #(1 << 31) @ disable DRAM_CLK_STOP_PD + str r1, [r0, #EMC_CFG] + + mov r1, #0 + str r1, [r0, #EMC_SELF_REF] @ take DRAM out of self refresh + mov r1, #1 + cmp r10, #TEGRA30 + streq r1, [r0, #EMC_NOP] + streq r1, [r0, #EMC_NOP] + streq r1, [r0, #EMC_REFRESH] + + emc_device_mask r1, r0 + +exit_selfrefresh_loop: + ldr r2, [r0, #EMC_EMC_STATUS] + ands r2, r2, r1 + bne exit_selfrefresh_loop + + lsr r1, r1, #8 @ devSel, bit0:dev0, bit1:dev1 + + mov32 r7, TEGRA_TMRUS_BASE + ldr r2, [r0, #EMC_FBIO_CFG5] + + and r2, r2, #3 @ check DRAM_TYPE + cmp r2, #2 + beq emc_lpddr2 + + /* Issue a ZQ_CAL for dev0 - DDR3 */ + mov32 r2, 0x80000011 @ DEV_SELECTION=2, LENGTH=LONG, CMD=1 + str r2, [r0, #EMC_ZQ_CAL] + ldr r2, [r7] + add r2, r2, #10 + wait_until r2, r7, r3 + + tst r1, #2 + beq zcal_done + + /* Issue a ZQ_CAL for dev1 - DDR3 */ + mov32 r2, 0x40000011 @ DEV_SELECTION=1, LENGTH=LONG, CMD=1 + str r2, [r0, #EMC_ZQ_CAL] + ldr r2, [r7] + add r2, r2, #10 + wait_until r2, r7, r3 + b zcal_done + +emc_lpddr2: + /* Issue a ZQ_CAL for dev0 - LPDDR2 */ + mov32 r2, 0x800A00AB @ DEV_SELECTION=2, MA=10, OP=0xAB + str r2, [r0, #EMC_MRW] + ldr r2, [r7] + add r2, r2, #1 + wait_until r2, r7, r3 + + tst r1, #2 + beq zcal_done + + /* Issue a ZQ_CAL for dev0 - LPDDR2 */ + mov32 r2, 0x400A00AB @ DEV_SELECTION=1, MA=10, OP=0xAB + str r2, [r0, #EMC_MRW] + ldr r2, [r7] + add r2, r2, #1 + wait_until r2, r7, r3 + +zcal_done: + mov r1, #0 @ unstall all transactions + str r1, [r0, #EMC_REQ_CTRL] + ldr r1, [r5, #0x4] @ restore EMC_ZCAL_INTERVAL + str r1, [r0, #EMC_ZCAL_INTERVAL] + ldr r1, [r5, #0x0] @ restore EMC_CFG + str r1, [r0, #EMC_CFG] + + /* Tegra114 had dual EMC channel, now config the other one */ + cmp r10, #TEGRA114 + bne __no_dual_emc_chanl + mov32 r1, TEGRA_EMC1_BASE + cmp r0, r1 + movne r0, r1 + addne r5, r5, #0x20 + bne exit_self_refresh +__no_dual_emc_chanl: + + mov32 r0, TEGRA_PMC_BASE + ldr r0, [r0, #PMC_SCRATCH41] + mov pc, r0 @ jump to tegra_resume +ENDPROC(tegra30_lp1_reset) + + .align L1_CACHE_SHIFT +tegra30_sdram_pad_address: + .word TEGRA_EMC_BASE + EMC_CFG @0x0 + .word TEGRA_EMC_BASE + EMC_ZCAL_INTERVAL @0x4 + .word TEGRA_EMC_BASE + EMC_AUTO_CAL_INTERVAL @0x8 + .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL @0xc + .word TEGRA_EMC_BASE + EMC_XM2VTTGENPADCTRL2 @0x10 + .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c + +tegra114_sdram_pad_address: + .word TEGRA_EMC0_BASE + EMC_CFG @0x0 + .word TEGRA_EMC0_BASE + EMC_ZCAL_INTERVAL @0x4 + .word TEGRA_EMC0_BASE + EMC_AUTO_CAL_INTERVAL @0x8 + .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL @0xc + .word TEGRA_EMC0_BASE + EMC_XM2VTTGENPADCTRL2 @0x10 + .word TEGRA_PMC_BASE + PMC_IO_DPD_STATUS @0x14 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_CLK_SOURCE_MSELECT @0x18 + .word TEGRA_CLK_RESET_BASE + CLK_RESET_SCLK_BURST @0x1c + .word TEGRA_EMC1_BASE + EMC_CFG @0x20 + .word TEGRA_EMC1_BASE + EMC_ZCAL_INTERVAL @0x24 + .word TEGRA_EMC1_BASE + EMC_AUTO_CAL_INTERVAL @0x28 + .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL @0x2c + .word TEGRA_EMC1_BASE + EMC_XM2VTTGENPADCTRL2 @0x30 + +tegra30_sdram_pad_size: + .word tegra114_sdram_pad_address - tegra30_sdram_pad_address + +tegra114_sdram_pad_size: + .word tegra30_sdram_pad_size - tegra114_sdram_pad_address + + .type tegra30_sdram_pad_save, %object +tegra30_sdram_pad_save: + .rept (tegra30_sdram_pad_size - tegra114_sdram_pad_address) / 4 + .long 0 + .endr + +/* + * tegra30_tear_down_core + * + * copied into and executed from IRAM + * puts memory in self-refresh for LP0 and LP1 + */ +tegra30_tear_down_core: + bl tegra30_sdram_self_refresh + bl tegra30_switch_cpu_to_clk32k + b tegra30_enter_sleep + +/* + * tegra30_switch_cpu_to_clk32k + * + * In LP0 and LP1 all PLLs will be turned off. Switching the CPU and System CLK + * to the 32KHz clock. + * r4 = TEGRA_PMC_BASE + * r5 = TEGRA_CLK_RESET_BASE + * r6 = TEGRA_FLOW_CTRL_BASE + * r7 = TEGRA_TMRUS_BASE + * r10= SoC ID + */ +tegra30_switch_cpu_to_clk32k: + /* + * start by jumping to CLKM to safely disable PLLs, then jump to + * CLKS. + */ + mov r0, #(1 << 28) + str r0, [r5, #CLK_RESET_SCLK_BURST] + /* 2uS delay delay between changing SCLK and CCLK */ + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r9 + str r0, [r5, #CLK_RESET_CCLK_BURST] + mov r0, #0 + str r0, [r5, #CLK_RESET_CCLK_DIVIDER] + str r0, [r5, #CLK_RESET_SCLK_DIVIDER] + + /* switch the clock source of mselect to be CLK_M */ + ldr r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT] + orr r0, r0, #MSELECT_CLKM + str r0, [r5, #CLK_RESET_CLK_SOURCE_MSELECT] + + /* 2uS delay delay between changing SCLK and disabling PLLs */ + ldr r1, [r7] + add r1, r1, #2 + wait_until r1, r7, r9 + + /* disable PLLM via PMC in LP1 */ + ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE] + bic r0, r0, #(1 << 12) + str r0, [r4, #PMC_PLLP_WB0_OVERRIDE] + + /* disable PLLP, PLLA, PLLC and PLLX */ + ldr r0, [r5, #CLK_RESET_PLLP_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLP_BASE] + ldr r0, [r5, #CLK_RESET_PLLA_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLA_BASE] + ldr r0, [r5, #CLK_RESET_PLLC_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLC_BASE] + ldr r0, [r5, #CLK_RESET_PLLX_BASE] + bic r0, r0, #(1 << 30) + str r0, [r5, #CLK_RESET_PLLX_BASE] + + cmp r10, #TEGRA30 + beq _no_pll_in_iddq + pll_iddq_entry r1, r5, CLK_RESET_PLLX_MISC3, CLK_RESET_PLLX_MISC3_IDDQ +_no_pll_in_iddq: + + /* switch to CLKS */ + mov r0, #0 /* brust policy = 32KHz */ + str r0, [r5, #CLK_RESET_SCLK_BURST] + + mov pc, lr + /* * tegra30_enter_sleep * @@ -172,8 +660,12 @@ tegra30_enter_sleep: orr r0, r0, #FLOW_CTRL_CSR_ENABLE str r0, [r6, r2] + tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 + cmp r10, #TEGRA30 mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT - orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + orreq r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ + orrne r0, r0, #FLOW_CTRL_HALT_LIC_IRQ | FLOW_CTRL_HALT_LIC_FIQ + cpu_to_halt_reg r2, r1 str r0, [r6, r2] dsb @@ -187,4 +679,126 @@ halted: /* !!!FIXME!!! Implement halt failure handler */ b halted +/* + * tegra30_sdram_self_refresh + * + * called with MMU off and caches disabled + * must be executed from IRAM + * r4 = TEGRA_PMC_BASE + * r5 = TEGRA_CLK_RESET_BASE + * r6 = TEGRA_FLOW_CTRL_BASE + * r7 = TEGRA_TMRUS_BASE + * r10= SoC ID + */ +tegra30_sdram_self_refresh: + + adr r8, tegra30_sdram_pad_save + tegra_get_soc_id TEGRA_APB_MISC_BASE, r10 + cmp r10, #TEGRA30 + adreq r2, tegra30_sdram_pad_address + ldreq r3, tegra30_sdram_pad_size + adrne r2, tegra114_sdram_pad_address + ldrne r3, tegra114_sdram_pad_size + mov r9, #0 + +padsave: + ldr r0, [r2, r9] @ r0 is the addr in the pad_address + + ldr r1, [r0] + str r1, [r8, r9] @ save the content of the addr + + add r9, r9, #4 + cmp r3, r9 + bne padsave +padsave_done: + + dsb + + cmp r10, #TEGRA30 + ldreq r0, =TEGRA_EMC_BASE @ r0 reserved for emc base addr + ldrne r0, =TEGRA_EMC0_BASE + +enter_self_refresh: + cmp r10, #TEGRA30 + mov r1, #0 + str r1, [r0, #EMC_ZCAL_INTERVAL] + str r1, [r0, #EMC_AUTO_CAL_INTERVAL] + ldr r1, [r0, #EMC_CFG] + bic r1, r1, #(1 << 28) + bicne r1, r1, #(1 << 29) + str r1, [r0, #EMC_CFG] @ disable DYN_SELF_REF + + emc_timing_update r1, r0 + + ldr r1, [r7] + add r1, r1, #5 + wait_until r1, r7, r2 + +emc_wait_auto_cal: + ldr r1, [r0, #EMC_AUTO_CAL_STATUS] + tst r1, #(1 << 31) @ wait until AUTO_CAL_ACTIVE is cleared + bne emc_wait_auto_cal + + mov r1, #3 + str r1, [r0, #EMC_REQ_CTRL] @ stall incoming DRAM requests + +emcidle: + ldr r1, [r0, #EMC_EMC_STATUS] + tst r1, #4 + beq emcidle + + mov r1, #1 + str r1, [r0, #EMC_SELF_REF] + + emc_device_mask r1, r0 + +emcself: + ldr r2, [r0, #EMC_EMC_STATUS] + and r2, r2, r1 + cmp r2, r1 + bne emcself @ loop until DDR in self-refresh + + /* Put VTTGEN in the lowest power mode */ + ldr r1, [r0, #EMC_XM2VTTGENPADCTRL] + mov32 r2, 0xF8F8FFFF @ clear XM2VTTGEN_DRVUP and XM2VTTGEN_DRVDN + and r1, r1, r2 + str r1, [r0, #EMC_XM2VTTGENPADCTRL] + ldr r1, [r0, #EMC_XM2VTTGENPADCTRL2] + cmp r10, #TEGRA30 + orreq r1, r1, #7 @ set E_NO_VTTGEN + orrne r1, r1, #0x3f + str r1, [r0, #EMC_XM2VTTGENPADCTRL2] + + emc_timing_update r1, r0 + + /* Tegra114 had dual EMC channel, now config the other one */ + cmp r10, #TEGRA114 + bne no_dual_emc_chanl + mov32 r1, TEGRA_EMC1_BASE + cmp r0, r1 + movne r0, r1 + bne enter_self_refresh +no_dual_emc_chanl: + + ldr r1, [r4, #PMC_CTRL] + tst r1, #PMC_CTRL_SIDE_EFFECT_LP0 + bne pmc_io_dpd_skip + /* + * Put DDR_DATA, DISC_ADDR_CMD, DDR_ADDR_CMD, POP_ADDR_CMD, POP_CLK + * and COMP in the lowest power mode when LP1. + */ + mov32 r1, 0x8EC00000 + str r1, [r4, #PMC_IO_DPD_REQ] +pmc_io_dpd_skip: + + dsb + + mov pc, lr + + .ltorg +/* dummy symbol for end of IRAM */ + .align L1_CACHE_SHIFT + .global tegra30_iram_end +tegra30_iram_end: + b . #endif diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S index 9daaef26b0f6..8d06213fbc47 100644 --- a/arch/arm/mach-tegra/sleep.S +++ b/arch/arm/mach-tegra/sleep.S @@ -56,7 +56,9 @@ ENTRY(tegra_disable_clean_inv_dcache) isb /* Flush the D-cache */ - bl v7_flush_dcache_louis + cmp r0, #TEGRA_FLUSH_CACHE_ALL + blne v7_flush_dcache_louis + bleq v7_flush_dcache_all /* Trun off coherency */ exit_smp r4, r5 @@ -67,15 +69,40 @@ ENDPROC(tegra_disable_clean_inv_dcache) #ifdef CONFIG_PM_SLEEP /* + * tegra_init_l2_for_a15 + * + * set up the correct L2 cache data RAM latency + */ +ENTRY(tegra_init_l2_for_a15) + mrc p15, 0, r0, c0, c0, 5 + ubfx r0, r0, #8, #4 + tst r0, #1 @ only need for cluster 0 + bne _exit_init_l2_a15 + + mrc p15, 0x1, r0, c9, c0, 2 + and r0, r0, #7 + cmp r0, #2 + bicne r0, r0, #7 + orrne r0, r0, #2 + mcrne p15, 0x1, r0, c9, c0, 2 +_exit_init_l2_a15: + + mov pc, lr +ENDPROC(tegra_init_l2_for_a15) + +/* * tegra_sleep_cpu_finish(unsigned long v2p) * * enters suspend in LP2 by turning off the mmu and jumping to * tegra?_tear_down_cpu */ ENTRY(tegra_sleep_cpu_finish) + mov r4, r0 /* Flush and disable the L1 data cache */ + mov r0, #TEGRA_FLUSH_CACHE_ALL bl tegra_disable_clean_inv_dcache + mov r0, r4 mov32 r6, tegra_tear_down_cpu ldr r1, [r6] add r1, r1, r0 @@ -107,10 +134,10 @@ ENTRY(tegra_shut_off_mmu) #ifdef CONFIG_CACHE_L2X0 /* Disable L2 cache */ check_cpu_part_num 0xc09, r9, r10 - movweq r4, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) - movteq r4, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) - moveq r5, #0 - streq r5, [r4, #L2X0_CTRL] + movweq r2, #:lower16:(TEGRA_ARM_PERIF_BASE + 0x3000) + movteq r2, #:upper16:(TEGRA_ARM_PERIF_BASE + 0x3000) + moveq r3, #0 + streq r3, [r2, #L2X0_CTRL] #endif mov pc, r0 ENDPROC(tegra_shut_off_mmu) diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h index 98b7da698f2b..a4edbb3abd3d 100644 --- a/arch/arm/mach-tegra/sleep.h +++ b/arch/arm/mach-tegra/sleep.h @@ -41,7 +41,19 @@ #define CPU_NOT_RESETTABLE 0 #endif +/* flag of tegra_disable_clean_inv_dcache to do LoUIS or all */ +#define TEGRA_FLUSH_CACHE_LOUIS 0 +#define TEGRA_FLUSH_CACHE_ALL 1 + #ifdef __ASSEMBLY__ +/* waits until the microsecond counter (base) is > rn */ +.macro wait_until, rn, base, tmp + add \rn, \rn, #1 +1001: ldr \tmp, [\base] + cmp \tmp, \rn + bmi 1001b +.endm + /* returns the offset of the flow controller halt register for a cpu */ .macro cpu_to_halt_reg rd, rcpu cmp \rcpu, #0 @@ -144,7 +156,7 @@ void tegra_pen_lock(void); void tegra_pen_unlock(void); void tegra_resume(void); int tegra_sleep_cpu_finish(unsigned long); -void tegra_disable_clean_inv_dcache(void); +void tegra_disable_clean_inv_dcache(u32 flag); #ifdef CONFIG_HOTPLUG_CPU void tegra20_hotplug_shutdown(void); diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 0d1e4128d460..fe56fcafdf15 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -116,28 +116,6 @@ out: tegra20_auxdata_lookup, parent); } -static void __init trimslice_init(void) -{ -#ifdef CONFIG_TEGRA_PCI - int ret; - - ret = tegra_pcie_init(true, true); - if (ret) - pr_err("tegra_pci_init() failed: %d\n", ret); -#endif -} - -static void __init harmony_init(void) -{ -#ifdef CONFIG_TEGRA_PCI - int ret; - - ret = harmony_pcie_init(); - if (ret) - pr_err("harmony_pcie_init() failed: %d\n", ret); -#endif -} - static void __init paz00_init(void) { if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) @@ -148,8 +126,6 @@ static struct { char *machine; void (*init)(void); } board_init_funcs[] = { - { "compulab,trimslice", trimslice_init }, - { "nvidia,harmony", harmony_init }, { "compal,paz00", paz00_init }, }; diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 5a768ad8e893..098602b939a9 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -9,7 +9,6 @@ config IA64 select PCI if (!IA64_HP_SIM) select ACPI if (!IA64_HP_SIM) select PM if (!IA64_HP_SIM) - select ARCH_SUPPORTS_MSI select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e12764c2a9d0..1e31fcb91157 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -727,7 +727,6 @@ config CAVIUM_OCTEON_SOC select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE select HW_HAS_PCI - select ARCH_SUPPORTS_MSI select ZONE_DMA32 select USB_ARCH_HAS_OHCI select USB_ARCH_HAS_EHCI @@ -763,7 +762,6 @@ config NLM_XLR_BOARD select CEVT_R4K select CSRC_R4K select IRQ_CPU - select ARCH_SUPPORTS_MSI select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index fa8e0aa250ca..f194c08bd057 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -136,11 +136,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } -#ifdef CONFIG_CPU_CAVIUM_OCTEON -/* MSI arch hook for OCTEON */ -#define arch_setup_msi_irqs arch_setup_msi_irqs -#endif - extern char * (*pcibios_plat_setup)(char *str); #ifdef CONFIG_OF diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index dbd9d3c991e8..3a678697b695 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -727,7 +727,6 @@ config PCI default y if !40x && !CPM2 && !8xx && !PPC_83xx \ && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON default PCI_QSPAN if !4xx && !CPM2 && 8xx - select ARCH_SUPPORTS_MSI select GENERIC_PCI_IOMAP help Find out whether your system includes a PCI bus. PCI is the name of diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 6653f2743c4e..95145a15c708 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -113,11 +113,6 @@ extern int pci_domain_nr(struct pci_bus *bus); /* Decide whether to display the domain number in /proc */ extern int pci_proc_domain(struct pci_bus *bus); -/* MSI arch hooks */ -#define arch_setup_msi_irqs arch_setup_msi_irqs -#define arch_teardown_msi_irqs arch_teardown_msi_irqs -#define arch_msi_check_device arch_msi_check_device - struct vm_area_struct; /* Map a range of PCI memory or I/O space for a device into user space */ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 8a4cae78f03c..21e5c165df28 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -430,7 +430,6 @@ menuconfig PCI bool "PCI support" default n depends on 64BIT - select ARCH_SUPPORTS_MSI select PCI_MSI help Enable PCI support. diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index 6e577ba0e5da..262b91bb8811 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -21,10 +21,6 @@ void pci_iounmap(struct pci_dev *, void __iomem *); int pci_domain_nr(struct pci_bus *); int pci_proc_domain(struct pci_bus *); -/* MSI arch hooks */ -#define arch_setup_msi_irqs arch_setup_msi_irqs -#define arch_teardown_msi_irqs arch_teardown_msi_irqs - #define ZPCI_BUS_NR 0 /* default bus number */ #define ZPCI_DEVFN 0 /* default device number */ diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index a00cbd356db5..1570ad2802b3 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -52,7 +52,6 @@ config SPARC32 config SPARC64 def_bool 64BIT - select ARCH_SUPPORTS_MSI select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_GRAPH_FP_TEST diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 24565a7ffe6d..74dff908a70f 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -380,7 +380,6 @@ config PCI select PCI_DOMAINS select GENERIC_PCI_IOMAP select TILE_GXIO_TRIO if TILEGX - select ARCH_SUPPORTS_MSI if TILEGX select PCI_MSI if TILEGX ---help--- Enable PCI root complex support, so PCIe endpoint devices can diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index b32ebf92b0ce..5db62ef37804 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2014,7 +2014,6 @@ menu "Bus options (PCI etc.)" config PCI bool "PCI support" default y - select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) ---help--- Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index d9e9e6c7ed32..7d7443283a9d 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -100,29 +100,6 @@ static inline void early_quirks(void) { } extern void pci_iommu_alloc(void); #ifdef CONFIG_PCI_MSI -/* MSI arch specific hooks */ -static inline int x86_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -{ - return x86_msi.setup_msi_irqs(dev, nvec, type); -} - -static inline void x86_teardown_msi_irqs(struct pci_dev *dev) -{ - x86_msi.teardown_msi_irqs(dev); -} - -static inline void x86_teardown_msi_irq(unsigned int irq) -{ - x86_msi.teardown_msi_irq(irq); -} -static inline void x86_restore_msi_irqs(struct pci_dev *dev, int irq) -{ - x86_msi.restore_msi_irqs(dev, irq); -} -#define arch_setup_msi_irqs x86_setup_msi_irqs -#define arch_teardown_msi_irqs x86_teardown_msi_irqs -#define arch_teardown_msi_irq x86_teardown_msi_irq -#define arch_restore_msi_irqs x86_restore_msi_irqs /* implemented in arch/x86/kernel/apic/io_apic. */ struct msi_desc; int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type); @@ -130,16 +107,9 @@ void native_teardown_msi_irq(unsigned int irq); void native_restore_msi_irqs(struct pci_dev *dev, int irq); int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, unsigned int irq_base, unsigned int irq_offset); -/* default to the implementation in drivers/lib/msi.c */ -#define HAVE_DEFAULT_MSI_TEARDOWN_IRQS -#define HAVE_DEFAULT_MSI_RESTORE_IRQS -void default_teardown_msi_irqs(struct pci_dev *dev); -void default_restore_msi_irqs(struct pci_dev *dev, int irq); #else #define native_setup_msi_irqs NULL #define native_teardown_msi_irq NULL -#define default_teardown_msi_irqs NULL -#define default_restore_msi_irqs NULL #endif #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index 5f24c71accaa..8ce0072cd700 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -107,6 +107,8 @@ struct x86_platform_ops x86_platform = { }; EXPORT_SYMBOL_GPL(x86_platform); + +#if defined(CONFIG_PCI_MSI) struct x86_msi_ops x86_msi = { .setup_msi_irqs = native_setup_msi_irqs, .compose_msi_msg = native_compose_msi_msg, @@ -116,6 +118,28 @@ struct x86_msi_ops x86_msi = { .setup_hpet_msi = default_setup_hpet_msi, }; +/* MSI arch specific hooks */ +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + return x86_msi.setup_msi_irqs(dev, nvec, type); +} + +void arch_teardown_msi_irqs(struct pci_dev *dev) +{ + x86_msi.teardown_msi_irqs(dev); +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + x86_msi.teardown_msi_irq(irq); +} + +void arch_restore_msi_irqs(struct pci_dev *dev, int irq) +{ + x86_msi.restore_msi_irqs(dev, irq); +} +#endif + struct x86_io_apic_ops x86_io_apic_ops = { .init = native_io_apic_init_mappings, .read = native_io_apic_read, |