Merge tag 'lpc32xx-dt-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into next/dt

Merge "NXP LPC32xx device tree updates for v4.7" from Vladimir Zapolskiy:

This includes a few functional changes:
* new representation of MIC, SIC1 and SIC2 interrupt controllers,
* disabled by default SPI1, SPI2, SSP0 and SSP1 SPI controllers in
  shared lpc32xx.dtsi file,
* added clock sources for SPI1 and SPI2,
* set default clock rate of HCLK PLL to main osc rate multiplied by 16.

Also there are some non-functional changes:
* flatten board DTS files by exploiting device node labels,
* add 'partitions' device node for NAND SLC / MTD OF,
* correct Atmel vendor prefix to describe on board AT24 EEPROMs,
* rename board DTS files by adding SoC name prefix.

Since now DTS files of LPC32xx boards match "^lpc32[2345]0-" pattern.

* tag 'lpc32xx-dt-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
  ARM: dts: lpc32xx: phy3250: add SoC name prefix to board dts file
  ARM: dts: lpc32xx: phy3250: add NAND partitions device node
  ARM: dts: lpc32xx: phy3250: avoid extension of device nodes by absolute path
  ARM: dts: lpc32xx: ea3250: add SoC name prefix to board dts file
  ARM: dts: lpc32xx: ea3250: fix Atmel at24 eeprom vendor
  ARM: dts: lpc32xx: ea3250: add NAND partitions device node
  ARM: dts: lpc32xx: ea3250: avoid extension of device nodes by absolute path
  ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC
  dt-bindings: interrupt-controllers: add description of SIC1 and SIC2
  ARM: dts: lpc32xx: disabled ssp0/spi1 & ssp1/spi2 by default
  ARM: dts: phy3250: enable ssp0
  ARM: dts: lpc32xx: add clock properties to spi nodes
  ARM: dts: lpc32xx: set default clock rate of HCLK PLL

5 files changed, 401 insertions, 362 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ce086452cbee..fcd4e2a0b1a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -245,7 +245,8 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \
 	lpc4350-hitex-eval.dtb \
 	lpc4357-ea4357-devkit.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += \
-	ea3250.dtb phy3250.dtb
+	lpc3250-ea3250.dtb \
+	lpc3250-phy3250.dtb
 dtb-$(CONFIG_MACH_MESON6) += \
 	meson6-atv1200.dtb
 dtb-$(CONFIG_MACH_MESON8) += \
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/lpc3250-ea3250.dts
index a4a281fe82af..52b3ed10283a 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/lpc3250-ea3250.dts
@@ -25,119 +25,6 @@
 		reg = <0x80000000 0x4000000>;
 	};
 
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* 128MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <260000000>;
-			nxp,whold = <104000000>;
-			nxp,wsetup = <200000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <34666666>;
-			nxp,rhold = <104000000>;
-			nxp,rsetup = <200000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "ea3250-boot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-
-			mtd1@00080000 {
-				label = "ea3250-uboot";
-				reg = <0x00080000 0x000c0000>;
-				read-only;
-			};
-
-			mtd2@00140000 {
-				label = "ea3250-kernel";
-				reg = <0x00140000 0x00400000>;
-			};
-
-			mtd3@00540000 {
-				label = "ea3250-rootfs";
-				reg = <0x00540000 0x07ac0000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			uart6: serial@40098000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "at,24c256";
-					reg = <0x50>;
-				};
-
-				eeprom@57 {
-					compatible = "at,24c64";
-					reg = <0x57>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-
-				pca9532: pca9532@60 {
-					compatible = "nxp,pca9532";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x60>;
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			sd@20098000 {
-				wp-gpios = <&pca9532 5 0>;
-				cd-gpios = <&pca9532 4 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart1: serial@40014000 {
-				status = "okay";
-			};
-
-			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-			adc@40048000 {
-				status = "okay";
-			};
-		};
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -258,12 +145,44 @@
 	};
 };
 
-/* Here, choose exactly one from: ohci, usbd */
-&ohci /* &usbd */ {
-	transceiver = <&isp1301>;
+/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+&adc {
 	status = "okay";
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 0x59 0>;
+		reset-gpio = <&gpio 0x51 0>;
+		dac-clk = "wspll";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+
+	pca9532: pca9532@60 {
+		compatible = "nxp,pca9532";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
 &i2cusb {
 	clock-frequency = <100000>;
 
@@ -272,3 +191,82 @@
 		reg = <0x2d>;
 	};
 };
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&pca9532 5 0>;
+	cd-gpios = <&pca9532 4 0>;
+	cd-inverted;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* 128MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <260000000>;
+	nxp,whold = <104000000>;
+	nxp,wsetup = <200000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <34666666>;
+	nxp,rhold = <104000000>;
+	nxp,rsetup = <200000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@00000000 {
+			label = "ea3250-boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		mtd1@00080000 {
+			label = "ea3250-uboot";
+			reg = <0x00080000 0x000c0000>;
+			read-only;
+		};
+
+		mtd2@00140000 {
+			label = "ea3250-kernel";
+			reg = <0x00140000 0x00400000>;
+		};
+
+		mtd3@00540000 {
+			label = "ea3250-rootfs";
+			reg = <0x00540000 0x07ac0000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts
new file mode 100644
index 000000000000..fd95e2b10357
--- /dev/null
+++ b/arch/arm/boot/dts/lpc3250-phy3250.dts
@@ -0,0 +1,226 @@
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc3250";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>;
+	};
+
+	regulators {
+		backlight_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "backlight_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 4 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		lcd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 0 0>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		sd_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "sd_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 5 0>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 { /* red */
+			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
+			default-state = "off";
+		};
+
+		led1 { /* green */
+			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&clcd {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	uda1380: uda1380@18 {
+		compatible = "nxp,uda1380";
+		reg = <0x18>;
+		power-gpio = <&gpio 0x59 0>;
+		reset-gpio = <&gpio 0x51 0>;
+		dac-clk = "wspll";
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+};
+
+&key {
+	keypad,num-rows = <1>;
+	keypad,num-columns = <1>;
+	nxp,debounce-delay-ms = <3>;
+	nxp,scan-delay-ms = <34>;
+	linux,keymap = <0x00000002>;
+	status = "okay";
+};
+
+&mac {
+	phy-mode = "rmii";
+	use-iram;
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&sd {
+	wp-gpios = <&gpio 3 0 0>;
+	cd-gpios = <&gpio 3 1 0>;
+	cd-inverted;
+	bus-width = <4>;
+	vmmc-supply = <&sd_reg>;
+	status = "okay";
+};
+
+/* 64MB Flash via SLC NAND controller */
+&slc {
+	status = "okay";
+
+	nxp,wdr-clks = <14>;
+	nxp,wwidth = <40000000>;
+	nxp,whold = <100000000>;
+	nxp,wsetup = <100000000>;
+	nxp,rdr-clks = <14>;
+	nxp,rwidth = <40000000>;
+	nxp,rhold = <66666666>;
+	nxp,rsetup = <100000000>;
+	nand-on-flash-bbt;
+	gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mtd0@00000000 {
+			label = "phy3250-boot";
+			reg = <0x00000000 0x00064000>;
+			read-only;
+		};
+
+		mtd1@00064000 {
+			label = "phy3250-uboot";
+			reg = <0x00064000 0x00190000>;
+			read-only;
+		};
+
+		mtd2@001f4000 {
+			label = "phy3250-ubt-prms";
+			reg = <0x001f4000 0x00010000>;
+		};
+
+		mtd3@00204000 {
+			label = "phy3250-kernel";
+			reg = <0x00204000 0x00400000>;
+		};
+
+		mtd4@00604000 {
+			label = "phy3250-rootfs";
+			reg = <0x00604000 0x039fc000>;
+		};
+	};
+};
+
+&ssp0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	num-cs = <1>;
+	cs-gpios = <&gpio 3 5 0>;
+	status = "okay";
+
+	eeprom: at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+
+		pl022,interface = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+	};
+};
+
+&tsc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index c58d8da9ea2a..e295e1ec82a5 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -92,7 +92,8 @@
 			ohci: ohci@0 {
 				compatible = "nxp,ohci-nxp", "usb-ohci";
 				reg = <0x0 0x300>;
-				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&sic1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
 				status = "disabled";
 			};
@@ -100,10 +101,11 @@
 			usbd: usbd@0 {
 				compatible = "nxp,lpc3220-udc";
 				reg = <0x0 0x300>;
-				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>,
-					     <62 IRQ_TYPE_LEVEL_HIGH>,
-					     <60 IRQ_TYPE_LEVEL_HIGH>,
-					     <58 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&sic1>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH>,
+					     <30 IRQ_TYPE_LEVEL_HIGH>,
+					     <28 IRQ_TYPE_LEVEL_HIGH>,
+					     <26 IRQ_TYPE_LEVEL_LOW>;
 				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
 				status = "disabled";
 			};
@@ -111,7 +113,8 @@
 			i2cusb: i2c@300 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x300 0x100>;
-				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&sic1>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -162,30 +165,44 @@
 			compatible = "simple-bus";
 			ranges = <0x20000000 0x20000000 0x30000000>;
 
+			/*
+			 * ssp0 and spi1 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
 			ssp0: ssp@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP0>;
 				clock-names = "apb_pclk";
+				status = "disabled";
 			};
 
 			spi1: spi@20088000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20088000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI1>;
+				status = "disabled";
 			};
 
+			/*
+			 * ssp1 and spi2 are shared pins;
+			 * enable one in your board dts, as needed.
+			 */
 			ssp1: ssp@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_SSP1>;
 				clock-names = "apb_pclk";
+				status = "disabled";
 			};
 
 			spi2: spi@20090000 {
 				compatible = "nxp,lpc3220-spi";
 				reg = <0x20090000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_SPI2>;
+				status = "disabled";
 			};
 
 			i2s0: i2s@20094000 {
@@ -249,7 +266,8 @@
 			i2c1: i2c@400A0000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A0000 0x100>;
-				interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&sic1>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
@@ -259,7 +277,8 @@
 			i2c2: i2c@400A8000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A8000 0x100>;
-				interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-parent = <&sic1>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
@@ -294,22 +313,41 @@
 
 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
+
+					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
+					assigned-clock-rates = <208000000>;
 				};
 			};
 
-			/*
-			 * MIC Interrupt controller includes:
-			 *   MIC @40008000
-			 *   SIC1 @4000C000
-			 *   SIC2 @40010000
-			 */
 			mic: interrupt-controller@40008000 {
 				compatible = "nxp,lpc3220-mic";
+				reg = <0x40008000 0x4000>;
 				interrupt-controller;
-				reg = <0x40008000 0xC000>;
 				#interrupt-cells = <2>;
 			};
 
+			sic1: interrupt-controller@4000c000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x4000c000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+					     <30 IRQ_TYPE_LEVEL_LOW>;
+				};
+
+			sic2: interrupt-controller@40010000 {
+				compatible = "nxp,lpc3220-sic";
+				reg = <0x40010000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				interrupt-parent = <&mic>;
+				interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
+					     <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+
 			uart1: serial@40014000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x40014000 0x1000>;
@@ -334,7 +372,8 @@
 			rtc: rtc@40024000 {
 				compatible = "nxp,lpc3220-rtc";
 				reg = <0x40024000 0x1000>;
-				interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&sic1>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_RTC>;
 			};
 
@@ -387,7 +426,8 @@
 			adc: adc@40048000 {
 				compatible = "nxp,lpc3220-adc";
 				reg = <0x40048000 0x1000>;
-				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};
@@ -395,7 +435,8 @@
 			tsc: tsc@40048000 {
 				compatible = "nxp,lpc3220-tsc";
 				reg = <0x40048000 0x1000>;
-				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&sic1>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
deleted file mode 100644
index a00d7ce7802b..000000000000
--- a/arch/arm/boot/dts/phy3250.dts
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * PHYTEC phyCORE-LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "lpc32xx.dtsi"
-
-/ {
-	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
-	compatible = "phytec,phy3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x4000000>;
-	};
-
-	regulators {
-		backlight_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "backlight_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio 5 4 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		lcd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "lcd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio 5 0 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		sd_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "sd_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio 5 5 0>;
-			enable-active-high;
-		};
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		clcd@31040000 {
-			status = "okay";
-		};
-
-		/* 64MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <40000000>;
-			nxp,whold = <100000000>;
-			nxp,wsetup = <100000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <40000000>;
-			nxp,rhold = <66666666>;
-			nxp,rsetup = <100000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "phy3250-boot";
-				reg = <0x00000000 0x00064000>;
-				read-only;
-			};
-
-			mtd1@00064000 {
-				label = "phy3250-uboot";
-				reg = <0x00064000 0x00190000>;
-				read-only;
-			};
-
-			mtd2@001f4000 {
-				label = "phy3250-ubt-prms";
-				reg = <0x001f4000 0x00010000>;
-			};
-
-			mtd3@00204000 {
-				label = "phy3250-kernel";
-				reg = <0x00204000 0x00400000>;
-			};
-
-			mtd4@00604000 {
-				label = "phy3250-rootfs";
-				reg = <0x00604000 0x039fc000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				pcf8563: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			ssp0: ssp@20084000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				num-cs = <1>;
-				cs-gpios = <&gpio 3 5 0>;
-
-				eeprom: at25@0 {
-					pl022,interface = <0>;
-					pl022,com-mode = <0>;
-					pl022,rx-level-trig = <1>;
-					pl022,tx-level-trig = <1>;
-					pl022,ctrl-len = <11>;
-					pl022,wait-state = <0>;
-					pl022,duplex = <0>;
-
-					at25,byte-len = <0x8000>;
-					at25,addr-mode = <2>;
-					at25,page-size = <64>;
-
-					compatible = "atmel,at25";
-					reg = <0>;
-					spi-max-frequency = <5000000>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&gpio 3 0 0>;
-				cd-gpios = <&gpio 3 1 0>;
-				cd-inverted;
-				bus-width = <4>;
-				vmmc-supply = <&sd_reg>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart2: serial@40018000 {
-				status = "okay";
-			};
-
-			tsc@40048000 {
-				status = "okay";
-			};
-
-			key@40050000 {
-				status = "okay";
-				keypad,num-rows = <1>;
-				keypad,num-columns = <1>;
-				nxp,debounce-delay-ms = <3>;
-				nxp,scan-delay-ms = <34>;
-				linux,keymap = <0x00000002>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 { /* red */
-			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
-			default-state = "off";
-		};
-
-		led1 { /* green */
-			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-/* Here, choose exactly one from: ohci, usbd */
-&ohci /* &usbd */ {
-	transceiver = <&isp1301>;
-	status = "okay";
-};
-
-&i2cusb {
-	clock-frequency = <100000>;
-
-	isp1301: usb-transceiver@2c {
-		compatible = "nxp,isp1301";
-		reg = <0x2c>;
-	};
-};