Merge tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc

This modernizes the IXP4xx platform and adds initial Device Tree
Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to
offset 16, converts to SPARSE_IRQ, then we add proper subsystem
drivers in each subsystem for irqchip, GPIO and clocksource and
switch over to using these new drivers.

Next we modernize the NPE and QMGR drivers and push them down
into drivers/soc.

This has been tested on the IXP4xx NSLU2 and the Gateworks
GW2358-4.

* tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits)
  ARM: dts: Add queue manager and NPE to the IXP4xx DTSI
  soc: ixp4xx: qmgr: Add DT probe code
  soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr
  soc: ixp4xx: npe: Add DT probe code
  soc: ixp4xx: Add DT bindings for IXP4xx NPE
  soc: ixp4xx: qmgr: Pass resources
  soc: ixp4xx: Remove unused functions
  soc: ixp4xx: Uninline several functions
  soc: ixp4xx: npe: Pass addresses as resources
  ARM: ixp4xx: Turn the QMGR into a platform device
  ARM: ixp4xx: Turn the NPE into a platform device
  ARM: ixp4xx: Move IXP4xx QMGR and NPE headers
  ARM: ixp4xx: Move NPE and QMGR to drivers/soc
  ARM: dts: Add some initial IXP4xx device trees
  ARM: ixp4xx: Add device tree boot support
  ARM: ixp4xx: Add DT bindings
  gpio: ixp4xx: Add OF probing support
  gpio: ixp4xx: Add DT bindings
  clocksource/drivers/ixp4xx: Add OF initialization support
  clocksource/drivers/ixp4xx: Add DT bindings
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

41 files changed, 632 insertions, 1992 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 61d949e9233f..29bb2aca02d4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -429,12 +429,15 @@ config ARCH_IXP4XX
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CLKSRC_MMIO
 	select CPU_XSCALE
 	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_MULTI_HANDLER
+	select GPIO_IXP4XX
 	select GPIOLIB
 	select HAVE_PCI
+	select IXP4XX_IRQ
+	select IXP4XX_TIMER
 	select NEED_MACH_IO_H
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f4f5aeaf3298..7af4e3289a89 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -229,6 +229,9 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
 	integratorcp.dtb
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	keystone-k2hk-evm.dtb \
 	keystone-k2l-evm.dtb \
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
new file mode 100644
index 000000000000..8fcd95805ff4
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Linksys NSLU2
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Linksys NSLU2 (Network Storage Link for USB 2.0 Disk Drives)";
+	compatible = "linksys,nslu2", "intel,ixp42x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 32 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-status {
+			label = "nslu2:red:status";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-ready {
+			label = "nslu2:green:ready";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-disk-1 {
+			label = "nslu2:green:disk-1";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-disk-2 {
+			label = "nslu2:green:disk-2";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6f {
+			compatible = "xicor,x1205";
+			reg = <0x6f>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		timeout-ms = <5000>;
+	};
+
+	/* The first 16MB region on the expansion bus */
+	flash@50000000 {
+		compatible = "intel,ixp4xx-flash", "cfi-flash";
+		bank-width = <2>;
+		/*
+		 * 8 MB of Flash in 0x20000 byte blocks
+		 * mapped in at 0x50000000
+		 */
+		reg = <0x50000000 0x800000>;
+
+		partitions {
+			compatible = "redboot-fis";
+			/* Eraseblock at 0x7e0000 */
+			fis-index-block = <0x3f>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
new file mode 100644
index 000000000000..a9622ca850cc
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 42x series. This series has 32 interrupts.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp42x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
new file mode 100644
index 000000000000..ba1163a1e1e7
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Gateworks IXP43x-based Cambria GW2358
+ */
+
+/dts-v1/;
+
+#include "intel-ixp43x.dtsi"
+
+/ {
+	model = "Gateworks Cambria GW2358";
+	compatible = "gateworks,gw2358", "intel,ixp43x";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = "uart0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-user {
+			label = "gw2358:green:LED";
+			gpios = <&pld1 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hwmon@28 {
+			compatible = "adi,ad7418";
+			reg = <0x28>;
+		};
+		rtc: ds1672@68 {
+			compatible = "dallas,ds1672";
+			reg = <0x68>;
+		};
+		eeprom@51 {
+			compatible = "atmel,24c08";
+			reg = <0x51>;
+			pagesize = <16>;
+			size = <1024>;
+			read-only;
+		};
+		pld0: pld@56 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x56>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		/* This PLD just handles the LED and user button */
+		pld1: pld@57 {
+			compatible = "gateworks,pld-gpio";
+			reg = <0x57>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	flash@50000000 {
+		compatible = "intel,ixp4xx-flash", "cfi-flash";
+		bank-width = <2>;
+		/*
+		 * 32 MB of Flash in 0x20000 byte blocks
+		 * mapped in at 0x50000000
+		 */
+		reg = <0x50000000 0x2000000>;
+
+		partitions {
+			compatible = "redboot-fis";
+			/* Eraseblock at 0x1fe0000 */
+			fis-index-block = <0xff>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp43x.dtsi b/arch/arm/boot/dts/intel-ixp43x.dtsi
new file mode 100644
index 000000000000..494fb2ff57a0
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp43x.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 43x series. This series has 64 interrupts and adds a few more
+ * peripherals over the 42x series.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
new file mode 100644
index 000000000000..f8cd506659dc
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a
+ * few more peripherals over the 42x and 43x series so this extends the
+ * basic IXP4xx DTSI.
+ */
+#include "intel-ixp4xx.dtsi"
+
+/ {
+	soc {
+		interrupt-controller@c8003000 {
+			compatible = "intel,ixp43x-interrupt";
+		};
+
+		/*
+		 * This is the USB Device Mode (UDC) controller, which is used
+		 * to present the IXP4xx as a device on a USB bus.
+		 */
+		usb@c800b000 {
+			compatible = "intel,ixp4xx-udc";
+			reg = <0xc800b000 0x1000>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@c8011000 {
+			compatible = "intel,ixp4xx-i2c";
+			reg = <0xc8011000 0x18>;
+			interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
new file mode 100644
index 000000000000..d4a09584f417
--- /dev/null
+++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for Intel XScale Network Processors
+ * in the IXP 4xx series.
+ */
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		qmgr: queue-manager@60000000 {
+			compatible = "intel,ixp4xx-ahb-queue-manager";
+			reg = <0x60000000 0x4000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@c8000000 {
+			compatible = "intel,xscale-uart";
+			reg = <0xc8000000 0x1000>;
+			/*
+			 * The reg-offset and reg-shift is a side effect
+			 * of running the platform in big endian mode.
+			 */
+			reg-offset = <3>;
+			reg-shift = <2>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <14745600>;
+			no-loopback-test;
+		};
+
+		gpio0: gpio@c8004000 {
+			compatible = "intel,ixp4xx-gpio";
+			reg = <0xc8004000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		intcon: interrupt-controller@c8003000 {
+			/*
+			 * Note: no compatible string. The subvariant of the
+			 * chip needs to define what version it is. The
+			 * location of the interrupt controller is fixed in
+			 * memory across all variants.
+			 */
+			reg = <0xc8003000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@c8005000 {
+			compatible = "intel,ixp4xx-timer";
+			reg = <0xc8005000 0x100>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		npe@c8006000 {
+			compatible = "intel,ixp4xx-network-processing-engine";
+			reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+		};
+	};
+};
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index fea008123eb1..83afb80d38a8 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -4,6 +4,20 @@ menu "Intel IXP4xx Implementation Options"
 
 comment "IXP4xx Platforms"
 
+config MACH_IXP4XX_OF
+	bool
+	prompt "Devce Tree IXP4xx boards"
+	default y
+	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select I2C
+	select I2C_IOP3XX
+	select PCI
+	select SERIAL_OF_PLATFORM
+	select TIMER_OF
+	select USE_OF
+	help
+	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
+
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
@@ -222,19 +236,6 @@ config IXP4XX_INDIRECT_PCI
 	  need to use the indirect method instead. If you don't know
 	  what you need, leave this option unselected.
 
-config IXP4XX_QMGR
-	tristate "IXP4xx Queue Manager support"
-	help
-	  This driver supports IXP4xx built-in hardware queue manager
-	  and is automatically selected by Ethernet and HSS drivers.
-
-config IXP4XX_NPE
-	tristate "IXP4xx Network Processor Engine support"
-	select FW_LOADER
-	help
-	  This driver supports IXP4xx built-in network coprocessors
-	  and is automatically selected by Ethernet and HSS drivers.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index f09994500a34..1fa4e6605782 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -6,6 +6,9 @@
 obj-pci-y	:=
 obj-pci-n	:=
 
+# Device tree platform
+obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
+
 obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
 obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
@@ -40,5 +43,3 @@ obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
 obj-$(CONFIG_MACH_ARCOM_VULCAN)	+= vulcan-setup.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
-obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-obj-$(CONFIG_IXP4XX_NPE)	+= ixp4xx_npe.o
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 548c7d43ade6..9c834f0f4231 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -27,6 +27,8 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define AVILA_MAX_DEV	4
 #define LOFT_MAX_DEV	6
 #define IRQ_LINES	4
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 44cbbce6bda6..1981b33109cb 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -28,6 +28,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define AVILA_SDA_PIN	7
 #define AVILA_SCL_PIN	6
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 846e033c56fa..cc5f15679d29 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -22,41 +22,30 @@
 #include <linux/serial_core.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/export.h>
-#include <linux/gpio/driver.h>
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/sched_clock.h>
+#include <linux/bitops.h>
+#include <linux/irqchip/irq-ixp4xx.h>
+#include <linux/platform_data/timer-ixp4xx.h>
 #include <mach/udc.h>
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <linux/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/exception.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#define IXP4XX_TIMER_FREQ 66666000
-
-/*
- * The timer register doesn't allow to specify the two least significant bits of
- * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
- * the best value with the two least significant bits unset.
- */
-#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
-				       (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
-			(IXP4XX_OST_RELOAD_MASK + 1)
+#include "irqs.h"
 
-static void __init ixp4xx_clocksource_init(void);
-static void __init ixp4xx_clockevent_init(void);
-static struct clock_event_device clockevent_ixp4xx;
+#define IXP4XX_TIMER_FREQ 66666000
 
 /*************************************************************************
  * IXP4xx chipset I/O mapping
@@ -77,11 +66,6 @@ static struct map_desc ixp4xx_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
 		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
 		.type		= MT_DEVICE
-	}, {	/* Queue Manager */
-		.virtual	= (unsigned long)IXP4XX_QMGR_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS),
-		.length		= IXP4XX_QMGR_REGION_SIZE,
-		.type		= MT_DEVICE
 	},
 };
 
@@ -90,258 +74,23 @@ void __init ixp4xx_map_io(void)
   	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
 }
 
-/*
- * GPIO-functions
- */
-/*
- * The following converted to the real HW bits the gpio_line_config
- */
-/* GPIO pin types */
-#define IXP4XX_GPIO_OUT 		0x1
-#define IXP4XX_GPIO_IN  		0x2
-
-/* GPIO signal types */
-#define IXP4XX_GPIO_LOW			0
-#define IXP4XX_GPIO_HIGH		1
-
-/* GPIO Clocks */
-#define IXP4XX_GPIO_CLK_0		14
-#define IXP4XX_GPIO_CLK_1		15
-
-static void gpio_line_config(u8 line, u32 direction)
-{
-	if (direction == IXP4XX_GPIO_IN)
-		*IXP4XX_GPIO_GPOER |= (1 << line);
-	else
-		*IXP4XX_GPIO_GPOER &= ~(1 << line);
-}
-
-static void gpio_line_get(u8 line, int *value)
-{
-	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
-}
-
-static void gpio_line_set(u8 line, int value)
-{
-	if (value == IXP4XX_GPIO_HIGH)
-	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
-	else if (value == IXP4XX_GPIO_LOW)
-	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
-}
-
-/*************************************************************************
- * IXP4xx chipset IRQ handling
- *
- * TODO: GPIO IRQs should be marked invalid until the user of the IRQ
- *       (be it PCI or something else) configures that GPIO line
- *       as an IRQ.
- **************************************************************************/
-enum ixp4xx_irq_type {
-	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
-};
-
-/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
-static unsigned long long ixp4xx_irq_edge = 0;
-
-/*
- * IRQ -> GPIO mapping table
- */
-static signed char irq2gpio[32] = {
-	-1, -1, -1, -1, -1, -1,  0,  1,
-	-1, -1, -1, -1, -1, -1, -1, -1,
-	-1, -1, -1,  2,  3,  4,  5,  6,
-	 7,  8,  9, 10, 11, 12, -1, -1,
-};
-
-static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-{
-	int irq;
-
-	for (irq = 0; irq < 32; irq++) {
-		if (irq2gpio[irq] == gpio)
-			return irq;
-	}
-	return -EINVAL;
-}
-
-static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	int line = irq2gpio[d->irq];
-	u32 int_style;
-	enum ixp4xx_irq_type irq_type;
-	volatile u32 *int_reg;
-
-	/*
-	 * Only for GPIO IRQs
-	 */
-	if (line < 0)
-		return -EINVAL;
-
-	switch (type){
-	case IRQ_TYPE_EDGE_BOTH:
-		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
-		irq_type = IXP4XX_IRQ_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
-		irq_type = IXP4XX_IRQ_LEVEL;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
-		irq_type = IXP4XX_IRQ_LEVEL;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (irq_type == IXP4XX_IRQ_EDGE)
-		ixp4xx_irq_edge |= (1 << d->irq);
-	else
-		ixp4xx_irq_edge &= ~(1 << d->irq);
-
-	if (line >= 8) {	/* pins 8-15 */
-		line -= 8;
-		int_reg = IXP4XX_GPIO_GPIT2R;
-	} else {		/* pins 0-7 */
-		int_reg = IXP4XX_GPIO_GPIT1R;
-	}
-
-	/* Clear the style for the appropriate pin */
-	*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
-	    		(line * IXP4XX_GPIO_STYLE_SIZE));
-
-	*IXP4XX_GPIO_GPISR = (1 << line);
-
-	/* Set the new style */
-	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
-
-	/* Configure the line as an input */
-	gpio_line_config(irq2gpio[d->irq], IXP4XX_GPIO_IN);
-
-	return 0;
-}
-
-static void ixp4xx_irq_mask(struct irq_data *d)
-{
-	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
-		*IXP4XX_ICMR2 &= ~(1 << (d->irq - 32));
-	else
-		*IXP4XX_ICMR &= ~(1 << d->irq);
-}
-
-static void ixp4xx_irq_ack(struct irq_data *d)
-{
-	int line = (d->irq < 32) ? irq2gpio[d->irq] : -1;
-
-	if (line >= 0)
-		*IXP4XX_GPIO_GPISR = (1 << line);
-}
-
-/*
- * Level triggered interrupts on GPIO lines can only be cleared when the
- * interrupt condition disappears.
- */
-static void ixp4xx_irq_unmask(struct irq_data *d)
-{
-	if (!(ixp4xx_irq_edge & (1 << d->irq)))
-		ixp4xx_irq_ack(d);
-
-	if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->irq >= 32)
-		*IXP4XX_ICMR2 |= (1 << (d->irq - 32));
-	else
-		*IXP4XX_ICMR |= (1 << d->irq);
-}
-
-static struct irq_chip ixp4xx_irq_chip = {
-	.name		= "IXP4xx",
-	.irq_ack	= ixp4xx_irq_ack,
-	.irq_mask	= ixp4xx_irq_mask,
-	.irq_unmask	= ixp4xx_irq_unmask,
-	.irq_set_type	= ixp4xx_set_irq_type,
-};
-
 void __init ixp4xx_init_irq(void)
 {
-	int i = 0;
-
 	/*
 	 * ixp4xx does not implement the XScale PWRMODE register
 	 * so it must not call cpu_do_idle().
 	 */
 	cpu_idle_poll_ctrl(true);
 
-	/* Route all sources to IRQ instead of FIQ */
-	*IXP4XX_ICLR = 0x0;
-
-	/* Disable all interrupt */
-	*IXP4XX_ICMR = 0x0; 
-
-	if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
-		/* Route upper 32 sources to IRQ instead of FIQ */
-		*IXP4XX_ICLR2 = 0x00;
-
-		/* Disable upper 32 interrupts */
-		*IXP4XX_ICMR2 = 0x00;
-	}
-
-        /* Default to all level triggered */
-	for(i = 0; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &ixp4xx_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
+	ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
+			(cpu_is_ixp46x() || cpu_is_ixp43x()));
 }
 
-
-/*************************************************************************
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp 
- * counter as a source of real clock ticks to account for missed jiffies.
- *************************************************************************/
-
-static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ixp4xx_timer_irq = {
-	.name		= "timer1",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ixp4xx_timer_interrupt,
-	.dev_id		= &clockevent_ixp4xx,
-};
-
 void __init ixp4xx_timer_init(void)
 {
-	/* Reset/disable counter */
-	*IXP4XX_OSRT1 = 0;
-
-	/* Clear Pending Interrupt by writing '1' to it */
-	*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-	/* Reset time-stamp counter */
-	*IXP4XX_OSTS = 0;
-
-	/* Connect the interrupt handler and enable the interrupt */
-	setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-
-	ixp4xx_clocksource_init();
-	ixp4xx_clockevent_init();
+	return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
+				  IRQ_IXP4XX_TIMER1,
+				  IXP4XX_TIMER_FREQ);
 }
 
 static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
@@ -364,6 +113,24 @@ static struct resource ixp4xx_udc_resources[] = {
 	},
 };
 
+static struct resource ixp4xx_gpio_resource[] = {
+	{
+		.start = IXP4XX_GPIO_BASE_PHYS,
+		.end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ixp4xx_gpio_device = {
+	.name           = "ixp4xx-gpio",
+	.id             = -1,
+	.dev = {
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+	.resource = ixp4xx_gpio_resource,
+	.num_resources  = ARRAY_SIZE(ixp4xx_gpio_resource),
+};
+
 /*
  * USB device controller. The IXP4xx uses the same controller as PXA25X,
  * so we just use the same device.
@@ -378,7 +145,61 @@ static struct platform_device ixp4xx_udc_device = {
 	},
 };
 
+static struct resource ixp4xx_npe_resources[] = {
+	{
+		.start = IXP4XX_NPEA_BASE_PHYS,
+		.end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IXP4XX_NPEB_BASE_PHYS,
+		.end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IXP4XX_NPEC_BASE_PHYS,
+		.end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
+		.flags = IORESOURCE_MEM,
+	},
+
+};
+
+static struct platform_device ixp4xx_npe_device = {
+	.name           = "ixp4xx-npe",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(ixp4xx_npe_resources),
+	.resource       = ixp4xx_npe_resources,
+};
+
+static struct resource ixp4xx_qmgr_resources[] = {
+	{
+		.start = IXP4XX_QMGR_BASE_PHYS,
+		.end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_IXP4XX_QM1,
+		.end = IRQ_IXP4XX_QM1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_IXP4XX_QM2,
+		.end = IRQ_IXP4XX_QM2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ixp4xx_qmgr_device = {
+	.name           = "ixp4xx-qmgr",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(ixp4xx_qmgr_resources),
+	.resource       = ixp4xx_qmgr_resources,
+};
+
 static struct platform_device *ixp4xx_devices[] __initdata = {
+	&ixp4xx_npe_device,
+	&ixp4xx_qmgr_device,
+	&ixp4xx_gpio_device,
 	&ixp4xx_udc_device,
 };
 
@@ -413,56 +234,12 @@ static struct platform_device *ixp46x_devices[] __initdata = {
 unsigned long ixp4xx_exp_bus_size;
 EXPORT_SYMBOL(ixp4xx_exp_bus_size);
 
-static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
-{
-	gpio_line_config(gpio, IXP4XX_GPIO_IN);
-
-	return 0;
-}
-
-static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
-					int level)
-{
-	gpio_line_set(gpio, level);
-	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
-
-	return 0;
-}
-
-static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
-{
-	int value;
-
-	gpio_line_get(gpio, &value);
-
-	return value;
-}
-
-static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
-				  int value)
-{
-	gpio_line_set(gpio, value);
-}
-
-static struct gpio_chip ixp4xx_gpio_chip = {
-	.label			= "IXP4XX_GPIO_CHIP",
-	.direction_input	= ixp4xx_gpio_direction_input,
-	.direction_output	= ixp4xx_gpio_direction_output,
-	.get			= ixp4xx_gpio_get_value,
-	.set			= ixp4xx_gpio_set_value,
-	.to_irq			= ixp4xx_gpio_to_irq,
-	.base			= 0,
-	.ngpio			= 16,
-};
-
 void __init ixp4xx_sys_init(void)
 {
 	ixp4xx_exp_bus_size = SZ_16M;
 
 	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
 
-	gpiochip_add_data(&ixp4xx_gpio_chip, NULL);
-
 	if (cpu_is_ixp46x()) {
 		int region;
 
@@ -481,103 +258,8 @@ void __init ixp4xx_sys_init(void)
 			ixp4xx_exp_bus_size >> 20);
 }
 
-/*
- * sched_clock()
- */
-static u64 notrace ixp4xx_read_sched_clock(void)
-{
-	return *IXP4XX_OSTS;
-}
-
-/*
- * clocksource
- */
-
-static u64 ixp4xx_clocksource_read(struct clocksource *c)
-{
-	return *IXP4XX_OSTS;
-}
-
 unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
-static void __init ixp4xx_clocksource_init(void)
-{
-	sched_clock_register(ixp4xx_read_sched_clock, 32, ixp4xx_timer_freq);
-
-	clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32,
-			ixp4xx_clocksource_read);
-}
-
-/*
- * clockevents
- */
-static int ixp4xx_set_next_event(unsigned long evt,
-				 struct clock_event_device *unused)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-
-	*IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts;
-
-	return 0;
-}
-
-static int ixp4xx_shutdown(struct clock_event_device *evt)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
-
-	opts &= ~IXP4XX_OST_ENABLE;
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static int ixp4xx_set_oneshot(struct clock_event_device *evt)
-{
-	unsigned long opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT;
-	unsigned long osrt = 0;
-
-	/* period set by 'set next_event' */
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static int ixp4xx_set_periodic(struct clock_event_device *evt)
-{
-	unsigned long opts = IXP4XX_OST_ENABLE;
-	unsigned long osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
-
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static int ixp4xx_resume(struct clock_event_device *evt)
-{
-	unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK;
-	unsigned long osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK;
-
-	opts |= IXP4XX_OST_ENABLE;
-	*IXP4XX_OSRT1 = osrt | opts;
-	return 0;
-}
-
-static struct clock_event_device clockevent_ixp4xx = {
-	.name			= "ixp4xx timer1",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 200,
-	.set_state_shutdown	= ixp4xx_shutdown,
-	.set_state_periodic	= ixp4xx_set_periodic,
-	.set_state_oneshot	= ixp4xx_set_oneshot,
-	.tick_resume		= ixp4xx_resume,
-	.set_next_event		= ixp4xx_set_next_event,
-};
-
-static void __init ixp4xx_clockevent_init(void)
-{
-	clockevent_ixp4xx.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
-					0xf, 0xfffffffe);
-}
 
 void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
 {
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 5d14ce2aee6d..a16c35d2bb96 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -23,6 +23,8 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 #define SLOT0_DEVID	14
 #define SLOT1_DEVID	15
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 7e40fe70933b..7ca43ca2816d 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -25,6 +25,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
 #define COYOTE_IDE_BASE_VIRT	0xFFFE1000
 #define COYOTE_IDE_REGION_SIZE	0x1000
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 8dca76937723..6899023bd1b7 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -22,6 +22,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		4
 #define IRQ_LINES	3
 
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 397190f3a8da..4d4c62fced71 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -35,6 +35,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 
+#include "irqs.h"
+
 #define DSMG600_SDA_PIN		5
 #define DSMG600_SCL_PIN		4
 
@@ -268,9 +270,6 @@ static void __init dsmg600_init(void)
 {
 	ixp4xx_sys_init();
 
-	/* Make sure that GPIO14 and GPIO15 are not used as clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
 	dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	dsmg600_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index fd4a8625b4ae..6c08bb9d9807 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -22,6 +22,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		3
 #define IRQ_LINES	3
 
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index f0a152e365b1..648932d8d7a8 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -29,6 +29,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define FSG_SDA_PIN		12
 #define FSG_SCL_PIN		13
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index d9d6cc089707..903c75330b76 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -27,6 +27,8 @@
 
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 void __init gateway7001_pci_preinit(void)
 {
 	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 1be6faf6da9a..678e7dfff0e5 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -28,6 +28,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 static struct flash_platform_data gateway7001_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 551d114c9e14..1223d160448f 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -30,6 +30,8 @@
 #include <mach/hardware.h>
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 #define SLOT0_DEVID	0
 #define SLOT1_DEVID	1
 #define INTA		10 /* slot 1 has INTA and INTB crossed */
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 16a12994fb53..5dbdde8e2338 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -36,6 +36,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 /* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
    and operate as an SPI type interface.  The details of the interface
    are available on Kendin/Micrel's web site. */
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
deleted file mode 100644
index 79adf83e2c3d..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP4xx-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get interrupts
-		cmp	\irqstat, #0
-		beq	1001f				@ upper IRQ?
-		clz     \irqnr, \irqstat
-		mov     \base, #31
-		sub     \irqnr, \base, \irqnr
-		b	1002f				@ lower IRQ being
-							@ handled
-
-1001:
-		/*
-		 * IXP465/IXP435 has an upper IRQ status register
-		 */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
-		ldr	\irqstat, [\irqstat]		@ get upper interrupts
-		mov	\irqnr, #63
-		clz	\irqstat, \irqstat
- 		cmp	\irqstat, #32
-		subne	\irqnr, \irqnr, \irqstat
-#endif
-1002:
-		.endm
-
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
deleted file mode 100644
index 7e6d4cce7c27..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/irqs.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_NPEA		0
-#define IRQ_IXP4XX_NPEB		1
-#define IRQ_IXP4XX_NPEC		2
-#define IRQ_IXP4XX_QM1		3
-#define IRQ_IXP4XX_QM2		4
-#define IRQ_IXP4XX_TIMER1	5
-#define IRQ_IXP4XX_GPIO0	6
-#define IRQ_IXP4XX_GPIO1	7
-#define IRQ_IXP4XX_PCI_INT	8
-#define IRQ_IXP4XX_PCI_DMA1	9
-#define IRQ_IXP4XX_PCI_DMA2	10
-#define IRQ_IXP4XX_TIMER2	11
-#define IRQ_IXP4XX_USB		12
-#define IRQ_IXP4XX_UART2	13
-#define IRQ_IXP4XX_TIMESTAMP	14
-#define IRQ_IXP4XX_UART1	15
-#define IRQ_IXP4XX_WDOG		16
-#define IRQ_IXP4XX_AHB_PMU	17
-#define IRQ_IXP4XX_XSCALE_PMU	18
-#define IRQ_IXP4XX_GPIO2	19
-#define IRQ_IXP4XX_GPIO3	20
-#define IRQ_IXP4XX_GPIO4	21
-#define IRQ_IXP4XX_GPIO5	22
-#define IRQ_IXP4XX_GPIO6	23
-#define IRQ_IXP4XX_GPIO7	24
-#define IRQ_IXP4XX_GPIO8	25
-#define IRQ_IXP4XX_GPIO9	26
-#define IRQ_IXP4XX_GPIO10	27
-#define IRQ_IXP4XX_GPIO11	28
-#define IRQ_IXP4XX_GPIO12	29
-#define IRQ_IXP4XX_SW_INT1	30
-#define IRQ_IXP4XX_SW_INT2	31
-#define IRQ_IXP4XX_USB_HOST	32
-#define IRQ_IXP4XX_I2C		33
-#define IRQ_IXP4XX_SSP		34
-#define IRQ_IXP4XX_TSYNC	35
-#define IRQ_IXP4XX_EAU_DONE	36
-#define IRQ_IXP4XX_SHA_DONE	37
-#define IRQ_IXP4XX_SWCP_PE	58
-#define IRQ_IXP4XX_QM_PE	60
-#define IRQ_IXP4XX_MCU_ECC	61
-#define IRQ_IXP4XX_EXP_PE	62
-
-#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
-
-/*
- * Only first 32 sources are valid if running on IXP42x systems
- */
-#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
-#define NR_IRQS			64
-#else
-#define NR_IRQS			32
-#endif
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index b7ddd27419c2..588b76651085 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -43,8 +43,6 @@
  * Queue Manager
  */
 #define IXP4XX_QMGR_BASE_PHYS		0x60000000
-#define IXP4XX_QMGR_BASE_VIRT		IOMEM(0xFEF15000)
-#define IXP4XX_QMGR_REGION_SIZE		0x00004000
 
 /*
  * Peripheral space, including debug UART. Must be section-aligned so that
@@ -132,9 +130,6 @@
 #define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
 #define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
 #define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
-#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
-#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
 #define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
 #define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
 #define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
@@ -148,95 +143,6 @@
 #define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
 
 /*
- * Constants to make it easy to access  Interrupt Controller registers
- */
-#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
-#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
-#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
-#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
-#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
-#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
-#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
-
-/*
- * IXP465-only
- */
-#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
-#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
-#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
-#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
-#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
-#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
-
-
-/*
- * Interrupt Controller Register Definitions.
- */
-
-#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
-
-#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
-#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
-#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
-#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
-#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
-#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
-#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
-#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
-#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
-#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
-#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
-#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
-#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
-#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
-                                                                                
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
-#define IXP4XX_GPIO_GPOER_OFFSET        0x04
-#define IXP4XX_GPIO_GPINR_OFFSET        0x08
-#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
-#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
-#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
-#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
-#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
-
-/* 
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
-
-#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
-#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
-#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
-#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
-#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
-#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
-#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
-#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
-
-/*
- * GPIO register bit definitions
- */
-
-/* Interrupt styles
- */
-#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
-#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
-#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
-#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
-#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
-
-/* 
- * Mask used to clear interrupt styles 
- */
-#define IXP4XX_GPIO_STYLE_CLEAR		0x7
-#define IXP4XX_GPIO_STYLE_SIZE		3
-
-/*
  * Constants to make it easy to access Timer Control/Status registers
  */
 #define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
deleted file mode 100644
index 3a980845e557..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/npe.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __IXP4XX_NPE_H
-#define __IXP4XX_NPE_H
-
-#include <linux/kernel.h>
-
-extern const char *npe_names[];
-
-struct npe_regs {
-	u32 exec_addr, exec_data, exec_status_cmd, exec_count;
-	u32 action_points[4];
-	u32 watchpoint_fifo, watch_count;
-	u32 profile_count;
-	u32 messaging_status, messaging_control;
-	u32 mailbox_status, /*messaging_*/ in_out_fifo;
-};
-
-struct npe {
-	struct resource *mem_res;
-	struct npe_regs __iomem *regs;
-	u32 regs_phys;
-	int id;
-	int valid;
-};
-
-
-static inline const char *npe_name(struct npe *npe)
-{
-	return npe_names[npe->id];
-}
-
-int npe_running(struct npe *npe);
-int npe_send_message(struct npe *npe, const void *msg, const char *what);
-int npe_recv_message(struct npe *npe, void *msg, const char *what);
-int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
-int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
-struct npe *npe_request(unsigned id);
-void npe_release(struct npe *npe);
-
-#endif /* __IXP4XX_NPE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
deleted file mode 100644
index 4de8da536dbb..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#ifndef IXP4XX_QMGR_H
-#define IXP4XX_QMGR_H
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#define DEBUG_QMGR	0
-
-#define HALF_QUEUES	32
-#define QUEUES		64
-#define MAX_QUEUE_LENGTH 4	/* in dwords */
-
-#define QUEUE_STAT1_EMPTY		1 /* queue status bits */
-#define QUEUE_STAT1_NEARLY_EMPTY	2
-#define QUEUE_STAT1_NEARLY_FULL		4
-#define QUEUE_STAT1_FULL		8
-#define QUEUE_STAT2_UNDERFLOW		1
-#define QUEUE_STAT2_OVERFLOW		2
-
-#define QUEUE_WATERMARK_0_ENTRIES	0
-#define QUEUE_WATERMARK_1_ENTRY		1
-#define QUEUE_WATERMARK_2_ENTRIES	2
-#define QUEUE_WATERMARK_4_ENTRIES	3
-#define QUEUE_WATERMARK_8_ENTRIES	4
-#define QUEUE_WATERMARK_16_ENTRIES	5
-#define QUEUE_WATERMARK_32_ENTRIES	6
-#define QUEUE_WATERMARK_64_ENTRIES	7
-
-/* queue interrupt request conditions */
-#define QUEUE_IRQ_SRC_EMPTY		0
-#define QUEUE_IRQ_SRC_NEARLY_EMPTY	1
-#define QUEUE_IRQ_SRC_NEARLY_FULL	2
-#define QUEUE_IRQ_SRC_FULL		3
-#define QUEUE_IRQ_SRC_NOT_EMPTY		4
-#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY	5
-#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL	6
-#define QUEUE_IRQ_SRC_NOT_FULL		7
-
-struct qmgr_regs {
-	u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
-	u32 stat1[4];		/* 0x400 - 0x40F */
-	u32 stat2[2];		/* 0x410 - 0x417 */
-	u32 statne_h;		/* 0x418 - queue nearly empty */
-	u32 statf_h;		/* 0x41C - queue full */
-	u32 irqsrc[4];		/* 0x420 - 0x42F IRC source */
-	u32 irqen[2];		/* 0x430 - 0x437 IRQ enabled */
-	u32 irqstat[2];		/* 0x438 - 0x43F - IRQ access only */
-	u32 reserved[1776];
-	u32 sram[2048];		/* 0x2000 - 0x3FFF - config and buffer */
-};
-
-void qmgr_set_irq(unsigned int queue, int src,
-		  void (*handler)(void *pdev), void *pdev);
-void qmgr_enable_irq(unsigned int queue);
-void qmgr_disable_irq(unsigned int queue);
-
-/* request_ and release_queue() must be called from non-IRQ context */
-
-#if DEBUG_QMGR
-extern char qmgr_queue_descs[QUEUES][32];
-
-int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-		       unsigned int nearly_empty_watermark,
-		       unsigned int nearly_full_watermark,
-		       const char *desc_format, const char* name);
-#else
-int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-			 unsigned int nearly_empty_watermark,
-			 unsigned int nearly_full_watermark);
-#define qmgr_request_queue(queue, len, nearly_empty_watermark,		\
-			   nearly_full_watermark, desc_format, name)	\
-	__qmgr_request_queue(queue, len, nearly_empty_watermark,	\
-			     nearly_full_watermark)
-#endif
-
-void qmgr_release_queue(unsigned int queue);
-
-
-static inline void qmgr_put_entry(unsigned int queue, u32 val)
-{
-	struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
-#if DEBUG_QMGR
-	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
-
-	printk(KERN_DEBUG "Queue %s(%i) put %X\n",
-	       qmgr_queue_descs[queue], queue, val);
-#endif
-	__raw_writel(val, &qmgr_regs->acc[queue][0]);
-}
-
-static inline u32 qmgr_get_entry(unsigned int queue)
-{
-	u32 val;
-	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
-	val = __raw_readl(&qmgr_regs->acc[queue][0]);
-#if DEBUG_QMGR
-	BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
-
-	printk(KERN_DEBUG "Queue %s(%i) get %X\n",
-	       qmgr_queue_descs[queue], queue, val);
-#endif
-	return val;
-}
-
-static inline int __qmgr_get_stat1(unsigned int queue)
-{
-	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
-	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
-		>> ((queue & 7) << 2)) & 0xF;
-}
-
-static inline int __qmgr_get_stat2(unsigned int queue)
-{
-	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
-	BUG_ON(queue >= HALF_QUEUES);
-	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
-		>> ((queue & 0xF) << 1)) & 0x3;
-}
-
-/**
- * qmgr_stat_empty() - checks if a hardware queue is empty
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is empty.
- */
-static inline int qmgr_stat_empty(unsigned int queue)
-{
-	BUG_ON(queue >= HALF_QUEUES);
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
-}
-
-/**
- * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is below low watermark.
- */
-static inline int qmgr_stat_below_low_watermark(unsigned int queue)
-{
-	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
-	if (queue >= HALF_QUEUES)
-		return (__raw_readl(&qmgr_regs->statne_h) >>
-			(queue - HALF_QUEUES)) & 0x01;
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
-}
-
-/**
- * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is above high watermark
- */
-static inline int qmgr_stat_above_high_watermark(unsigned int queue)
-{
-	BUG_ON(queue >= HALF_QUEUES);
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
-}
-
-/**
- * qmgr_stat_full() - checks if a hardware queue is full
- * @queue:	queue number
- *
- * Returns non-zero value if the queue is full.
- */
-static inline int qmgr_stat_full(unsigned int queue)
-{
-	const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
-	if (queue >= HALF_QUEUES)
-		return (__raw_readl(&qmgr_regs->statf_h) >>
-			(queue - HALF_QUEUES)) & 0x01;
-	return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
-}
-
-/**
- * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
- * @queue:	queue number
- *
- * Returns non-zero value if the queue experienced underflow.
- */
-static inline int qmgr_stat_underflow(unsigned int queue)
-{
-	return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
-}
-
-/**
- * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
- * @queue:	queue number
- *
- * Returns non-zero value if the queue experienced overflow.
- */
-static inline int qmgr_stat_overflow(unsigned int queue)
-{
-	return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
-}
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h
new file mode 100644
index 000000000000..6b7f220cf9e0
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/irqs.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h 
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+#define IRQ_IXP4XX_BASE		16
+
+#define IRQ_IXP4XX_NPEA		(IRQ_IXP4XX_BASE + 0)
+#define IRQ_IXP4XX_NPEB		(IRQ_IXP4XX_BASE + 1)
+#define IRQ_IXP4XX_NPEC		(IRQ_IXP4XX_BASE + 2)
+#define IRQ_IXP4XX_QM1		(IRQ_IXP4XX_BASE + 3)
+#define IRQ_IXP4XX_QM2		(IRQ_IXP4XX_BASE + 4)
+#define IRQ_IXP4XX_TIMER1	(IRQ_IXP4XX_BASE + 5)
+#define IRQ_IXP4XX_GPIO0	(IRQ_IXP4XX_BASE + 6)
+#define IRQ_IXP4XX_GPIO1	(IRQ_IXP4XX_BASE + 7)
+#define IRQ_IXP4XX_PCI_INT	(IRQ_IXP4XX_BASE + 8)
+#define IRQ_IXP4XX_PCI_DMA1	(IRQ_IXP4XX_BASE + 9)
+#define IRQ_IXP4XX_PCI_DMA2	(IRQ_IXP4XX_BASE + 10)
+#define IRQ_IXP4XX_TIMER2	(IRQ_IXP4XX_BASE + 11)
+#define IRQ_IXP4XX_USB		(IRQ_IXP4XX_BASE + 12)
+#define IRQ_IXP4XX_UART2	(IRQ_IXP4XX_BASE + 13)
+#define IRQ_IXP4XX_TIMESTAMP	(IRQ_IXP4XX_BASE + 14)
+#define IRQ_IXP4XX_UART1	(IRQ_IXP4XX_BASE + 15)
+#define IRQ_IXP4XX_WDOG		(IRQ_IXP4XX_BASE + 16)
+#define IRQ_IXP4XX_AHB_PMU	(IRQ_IXP4XX_BASE + 17)
+#define IRQ_IXP4XX_XSCALE_PMU	(IRQ_IXP4XX_BASE + 18)
+#define IRQ_IXP4XX_GPIO2	(IRQ_IXP4XX_BASE + 19)
+#define IRQ_IXP4XX_GPIO3	(IRQ_IXP4XX_BASE + 20)
+#define IRQ_IXP4XX_GPIO4	(IRQ_IXP4XX_BASE + 21)
+#define IRQ_IXP4XX_GPIO5	(IRQ_IXP4XX_BASE + 22)
+#define IRQ_IXP4XX_GPIO6	(IRQ_IXP4XX_BASE + 23)
+#define IRQ_IXP4XX_GPIO7	(IRQ_IXP4XX_BASE + 24)
+#define IRQ_IXP4XX_GPIO8	(IRQ_IXP4XX_BASE + 25)
+#define IRQ_IXP4XX_GPIO9	(IRQ_IXP4XX_BASE + 26)
+#define IRQ_IXP4XX_GPIO10	(IRQ_IXP4XX_BASE + 27)
+#define IRQ_IXP4XX_GPIO11	(IRQ_IXP4XX_BASE + 28)
+#define IRQ_IXP4XX_GPIO12	(IRQ_IXP4XX_BASE + 29)
+#define IRQ_IXP4XX_SW_INT1	(IRQ_IXP4XX_BASE + 30)
+#define IRQ_IXP4XX_SW_INT2	(IRQ_IXP4XX_BASE + 31)
+#define IRQ_IXP4XX_USB_HOST	(IRQ_IXP4XX_BASE + 32)
+#define IRQ_IXP4XX_I2C		(IRQ_IXP4XX_BASE + 33)
+#define IRQ_IXP4XX_SSP		(IRQ_IXP4XX_BASE + 34)
+#define IRQ_IXP4XX_TSYNC	(IRQ_IXP4XX_BASE + 35)
+#define IRQ_IXP4XX_EAU_DONE	(IRQ_IXP4XX_BASE + 36)
+#define IRQ_IXP4XX_SHA_DONE	(IRQ_IXP4XX_BASE + 37)
+#define IRQ_IXP4XX_SWCP_PE	(IRQ_IXP4XX_BASE + 58)
+#define IRQ_IXP4XX_QM_PE	(IRQ_IXP4XX_BASE + 60)
+#define IRQ_IXP4XX_MCU_ECC	(IRQ_IXP4XX_BASE + 61)
+#define IRQ_IXP4XX_EXP_PE	(IRQ_IXP4XX_BASE + 62)
+
+#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
+#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
+
+#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 318424dd3c50..c1340465b2ea 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -24,6 +24,8 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		4
 #define IRQ_LINES	4
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 57d7df79d838..6f0f7ed18ea8 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -32,6 +32,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define IXDP425_SDA_PIN		7
 #define IXDP425_SCL_PIN		6
 
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index 1f8717ba13dc..ac0e9bc6eb4d 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -23,6 +23,8 @@
 
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 void __init ixdpg425_pci_preinit(void)
 {
 	irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c
new file mode 100644
index 000000000000..7449b8319c8a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IXP4xx Device Tree boot support
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/ixp4xx-regs.h>
+
+static struct map_desc ixp4xx_of_io_desc[] __initdata = {
+	/*
+	 * This is needed for runtime system configuration checks,
+	 * such as reading if hardware so-and-so is present. This
+	 * could eventually be converted into a syscon once all boards
+	 * are converted to device tree.
+	 */
+	{
+		.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
+		.pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
+		.length = SZ_4K,
+		.type = MT_DEVICE,
+	},
+#ifdef CONFIG_DEBUG_UART_8250
+	/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+	{
+		.virtual = CONFIG_DEBUG_UART_VIRT,
+		.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
+		.length = SZ_4K,
+		.type = MT_DEVICE,
+	},
+#endif
+};
+
+static void __init ixp4xx_of_map_io(void)
+{
+	iotable_init(ixp4xx_of_io_desc, ARRAY_SIZE(ixp4xx_of_io_desc));
+}
+
+/*
+ * We handle 4 differen SoC families. These compatible strings are enough
+ * to provide the core so that different boards can add their more detailed
+ * specifics.
+ */
+static const char *ixp4xx_of_board_compat[] = {
+	"intel,ixp42x",
+	"intel,ixp43x",
+	"intel,ixp45x",
+	"intel,ixp46x",
+	NULL,
+};
+
+DT_MACHINE_START(IXP4XX_DT, "IXP4xx (Device Tree)")
+	.map_io		= ixp4xx_of_map_io,
+	.dt_compat	= ixp4xx_of_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
deleted file mode 100644
index d4eb09a62863..000000000000
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ /dev/null
@@ -1,742 +0,0 @@
-/*
- * Intel IXP4xx Network Processor Engine driver for Linux
- *
- * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * The code is based on publicly available information:
- * - Intel IXP4xx Developer's Manual and other e-papers
- * - Intel IXP400 Access Library Software (BSD license)
- * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
- *   Thanks, Christian.
- */
-
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/firmware.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <mach/npe.h>
-
-#define DEBUG_MSG			0
-#define DEBUG_FW			0
-
-#define NPE_COUNT			3
-#define MAX_RETRIES			1000	/* microseconds */
-#define NPE_42X_DATA_SIZE		0x800	/* in dwords */
-#define NPE_46X_DATA_SIZE		0x1000
-#define NPE_A_42X_INSTR_SIZE		0x1000
-#define NPE_B_AND_C_42X_INSTR_SIZE	0x800
-#define NPE_46X_INSTR_SIZE		0x1000
-#define REGS_SIZE			0x1000
-
-#define NPE_PHYS_REG			32
-
-#define FW_MAGIC			0xFEEDF00D
-#define FW_BLOCK_TYPE_INSTR		0x0
-#define FW_BLOCK_TYPE_DATA		0x1
-#define FW_BLOCK_TYPE_EOF		0xF
-
-/* NPE exec status (read) and command (write) */
-#define CMD_NPE_STEP			0x01
-#define CMD_NPE_START			0x02
-#define CMD_NPE_STOP			0x03
-#define CMD_NPE_CLR_PIPE		0x04
-#define CMD_CLR_PROFILE_CNT		0x0C
-#define CMD_RD_INS_MEM			0x10 /* instruction memory */
-#define CMD_WR_INS_MEM			0x11
-#define CMD_RD_DATA_MEM			0x12 /* data memory */
-#define CMD_WR_DATA_MEM			0x13
-#define CMD_RD_ECS_REG			0x14 /* exec access register */
-#define CMD_WR_ECS_REG			0x15
-
-#define STAT_RUN			0x80000000
-#define STAT_STOP			0x40000000
-#define STAT_CLEAR			0x20000000
-#define STAT_ECS_K			0x00800000 /* pipeline clean */
-
-#define NPE_STEVT			0x1B
-#define NPE_STARTPC			0x1C
-#define NPE_REGMAP			0x1E
-#define NPE_CINDEX			0x1F
-
-#define INSTR_WR_REG_SHORT		0x0000C000
-#define INSTR_WR_REG_BYTE		0x00004000
-#define INSTR_RD_FIFO			0x0F888220
-#define INSTR_RESET_MBOX		0x0FAC8210
-
-#define ECS_BG_CTXT_REG_0		0x00 /* Background Executing Context */
-#define ECS_BG_CTXT_REG_1		0x01 /*		Stack level */
-#define ECS_BG_CTXT_REG_2		0x02
-#define ECS_PRI_1_CTXT_REG_0		0x04 /* Priority 1 Executing Context */
-#define ECS_PRI_1_CTXT_REG_1		0x05 /*		Stack level */
-#define ECS_PRI_1_CTXT_REG_2		0x06
-#define ECS_PRI_2_CTXT_REG_0		0x08 /* Priority 2 Executing Context */
-#define ECS_PRI_2_CTXT_REG_1		0x09 /*		Stack level */
-#define ECS_PRI_2_CTXT_REG_2		0x0A
-#define ECS_DBG_CTXT_REG_0		0x0C /* Debug Executing Context */
-#define ECS_DBG_CTXT_REG_1		0x0D /*		Stack level */
-#define ECS_DBG_CTXT_REG_2		0x0E
-#define ECS_INSTRUCT_REG		0x11 /* NPE Instruction Register */
-
-#define ECS_REG_0_ACTIVE		0x80000000 /* all levels */
-#define ECS_REG_0_NEXTPC_MASK		0x1FFF0000 /* BG/PRI1/PRI2 levels */
-#define ECS_REG_0_LDUR_BITS		8
-#define ECS_REG_0_LDUR_MASK		0x00000700 /* all levels */
-#define ECS_REG_1_CCTXT_BITS		16
-#define ECS_REG_1_CCTXT_MASK		0x000F0000 /* all levels */
-#define ECS_REG_1_SELCTXT_BITS		0
-#define ECS_REG_1_SELCTXT_MASK		0x0000000F /* all levels */
-#define ECS_DBG_REG_2_IF		0x00100000 /* debug level */
-#define ECS_DBG_REG_2_IE		0x00080000 /* debug level */
-
-/* NPE watchpoint_fifo register bit */
-#define WFIFO_VALID			0x80000000
-
-/* NPE messaging_status register bit definitions */
-#define MSGSTAT_OFNE	0x00010000 /* OutFifoNotEmpty */
-#define MSGSTAT_IFNF	0x00020000 /* InFifoNotFull */
-#define MSGSTAT_OFNF	0x00040000 /* OutFifoNotFull */
-#define MSGSTAT_IFNE	0x00080000 /* InFifoNotEmpty */
-#define MSGSTAT_MBINT	0x00100000 /* Mailbox interrupt */
-#define MSGSTAT_IFINT	0x00200000 /* InFifo interrupt */
-#define MSGSTAT_OFINT	0x00400000 /* OutFifo interrupt */
-#define MSGSTAT_WFINT	0x00800000 /* WatchFifo interrupt */
-
-/* NPE messaging_control register bit definitions */
-#define MSGCTL_OUT_FIFO			0x00010000 /* enable output FIFO */
-#define MSGCTL_IN_FIFO			0x00020000 /* enable input FIFO */
-#define MSGCTL_OUT_FIFO_WRITE		0x01000000 /* enable FIFO + WRITE */
-#define MSGCTL_IN_FIFO_WRITE		0x02000000
-
-/* NPE mailbox_status value for reset */
-#define RESET_MBOX_STAT			0x0000F0F0
-
-#define NPE_A_FIRMWARE "NPE-A"
-#define NPE_B_FIRMWARE "NPE-B"
-#define NPE_C_FIRMWARE "NPE-C"
-
-const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE };
-
-#define print_npe(pri, npe, fmt, ...)					\
-	printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
-
-#if DEBUG_MSG
-#define debug_msg(npe, fmt, ...)					\
-	print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
-#else
-#define debug_msg(npe, fmt, ...)
-#endif
-
-static struct {
-	u32 reg, val;
-} ecs_reset[] = {
-	{ ECS_BG_CTXT_REG_0,	0xA0000000 },
-	{ ECS_BG_CTXT_REG_1,	0x01000000 },
-	{ ECS_BG_CTXT_REG_2,	0x00008000 },
-	{ ECS_PRI_1_CTXT_REG_0,	0x20000080 },
-	{ ECS_PRI_1_CTXT_REG_1,	0x01000000 },
-	{ ECS_PRI_1_CTXT_REG_2,	0x00008000 },
-	{ ECS_PRI_2_CTXT_REG_0,	0x20000080 },
-	{ ECS_PRI_2_CTXT_REG_1,	0x01000000 },
-	{ ECS_PRI_2_CTXT_REG_2,	0x00008000 },
-	{ ECS_DBG_CTXT_REG_0,	0x20000000 },
-	{ ECS_DBG_CTXT_REG_1,	0x00000000 },
-	{ ECS_DBG_CTXT_REG_2,	0x001E0000 },
-	{ ECS_INSTRUCT_REG,	0x1003C00F },
-};
-
-static struct npe npe_tab[NPE_COUNT] = {
-	{
-		.id	= 0,
-		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
-		.regs_phys = IXP4XX_NPEA_BASE_PHYS,
-	}, {
-		.id	= 1,
-		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
-		.regs_phys = IXP4XX_NPEB_BASE_PHYS,
-	}, {
-		.id	= 2,
-		.regs	= (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
-		.regs_phys = IXP4XX_NPEC_BASE_PHYS,
-	}
-};
-
-int npe_running(struct npe *npe)
-{
-	return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
-}
-
-static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
-{
-	__raw_writel(data, &npe->regs->exec_data);
-	__raw_writel(addr, &npe->regs->exec_addr);
-	__raw_writel(cmd, &npe->regs->exec_status_cmd);
-}
-
-static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
-{
-	__raw_writel(addr, &npe->regs->exec_addr);
-	__raw_writel(cmd, &npe->regs->exec_status_cmd);
-	/* Iintroduce extra read cycles after issuing read command to NPE
-	   so that we read the register after the NPE has updated it.
-	   This is to overcome race condition between XScale and NPE */
-	__raw_readl(&npe->regs->exec_data);
-	__raw_readl(&npe->regs->exec_data);
-	return __raw_readl(&npe->regs->exec_data);
-}
-
-static void npe_clear_active(struct npe *npe, u32 reg)
-{
-	u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
-	npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
-}
-
-static void npe_start(struct npe *npe)
-{
-	/* ensure only Background Context Stack Level is active */
-	npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
-	npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
-	npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
-
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-	__raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
-}
-
-static void npe_stop(struct npe *npe)
-{
-	__raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
-}
-
-static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
-					u32 ldur)
-{
-	u32 wc;
-	int i;
-
-	/* set the Active bit, and the LDUR, in the debug level */
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
-		      ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
-
-	/* set CCTXT at ECS DEBUG L3 to specify in which context to execute
-	   the instruction, and set SELCTXT at ECS DEBUG Level to specify
-	   which context store to access.
-	   Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
-	*/
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
-		      (ctx << ECS_REG_1_CCTXT_BITS) |
-		      (ctx << ECS_REG_1_SELCTXT_BITS));
-
-	/* clear the pipeline */
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-
-	/* load NPE instruction into the instruction register */
-	npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
-
-	/* we need this value later to wait for completion of NPE execution
-	   step */
-	wc = __raw_readl(&npe->regs->watch_count);
-
-	/* issue a Step One command via the Execution Control register */
-	__raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
-
-	/* Watch Count register increments when NPE completes an instruction */
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (wc != __raw_readl(&npe->regs->watch_count))
-			return 0;
-		udelay(1);
-	}
-
-	print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
-	return -ETIMEDOUT;
-}
-
-static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
-					       u8 val, u32 ctx)
-{
-	/* here we build the NPE assembler instruction: mov8 d0, #0 */
-	u32 instr = INSTR_WR_REG_BYTE |	/* OpCode */
-		addr << 9 |		/* base Operand */
-		(val & 0x1F) << 4 |	/* lower 5 bits to immediate data */
-		(val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
-	return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-}
-
-static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
-						u16 val, u32 ctx)
-{
-	/* here we build the NPE assembler instruction: mov16 d0, #0 */
-	u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
-		addr << 9 |		/* base Operand */
-		(val & 0x1F) << 4 |	/* lower 5 bits to immediate data */
-		(val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
-	return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
-}
-
-static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
-						u32 val, u32 ctx)
-{
-	/* write in 16 bit steps first the high and then the low value */
-	if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
-		return -ETIMEDOUT;
-	return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
-}
-
-static int npe_reset(struct npe *npe)
-{
-	u32 val, ctl, exec_count, ctx_reg2;
-	int i;
-
-	ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
-		0x3F3FFFFF;
-
-	/* disable parity interrupt */
-	__raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
-
-	/* pre exec - debug instruction */
-	/* turn off the halt bit by clearing Execution Count register. */
-	exec_count = __raw_readl(&npe->regs->exec_count);
-	__raw_writel(0, &npe->regs->exec_count);
-	/* ensure that IF and IE are on (temporarily), so that we don't end up
-	   stepping forever */
-	ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
-		      ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
-
-	/* clear the FIFOs */
-	while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
-		;
-	while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
-		/* read from the outFIFO until empty */
-		print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
-			  __raw_readl(&npe->regs->in_out_fifo));
-
-	while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
-		/* step execution of the NPE intruction to read inFIFO using
-		   the Debug Executing Context stack */
-		if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
-			return -ETIMEDOUT;
-
-	/* reset the mailbox reg from the XScale side */
-	__raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
-	/* from NPE side */
-	if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
-		return -ETIMEDOUT;
-
-	/* Reset the physical registers in the NPE register file */
-	for (val = 0; val < NPE_PHYS_REG; val++) {
-		if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
-			return -ETIMEDOUT;
-		/* address is either 0 or 4 */
-		if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
-			return -ETIMEDOUT;
-	}
-
-	/* Reset the context store = each context's Context Store registers */
-
-	/* Context 0 has no STARTPC. Instead, this value is used to set NextPC
-	   for Background ECS, to set where NPE starts executing code */
-	val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
-	val &= ~ECS_REG_0_NEXTPC_MASK;
-	val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
-	npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
-
-	for (i = 0; i < 16; i++) {
-		if (i) {	/* Context 0 has no STEVT nor STARTPC */
-			/* STEVT = off, 0x80 */
-			if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
-				return -ETIMEDOUT;
-			if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
-				return -ETIMEDOUT;
-		}
-		/* REGMAP = d0->p0, d8->p2, d16->p4 */
-		if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
-			return -ETIMEDOUT;
-		if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
-			return -ETIMEDOUT;
-	}
-
-	/* post exec */
-	/* clear active bit in debug level */
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
-	/* clear the pipeline */
-	__raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
-	/* restore previous values */
-	__raw_writel(exec_count, &npe->regs->exec_count);
-	npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
-
-	/* write reset values to Execution Context Stack registers */
-	for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
-		npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
-			      ecs_reset[val].val);
-
-	/* clear the profile counter */
-	__raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
-
-	__raw_writel(0, &npe->regs->exec_count);
-	__raw_writel(0, &npe->regs->action_points[0]);
-	__raw_writel(0, &npe->regs->action_points[1]);
-	__raw_writel(0, &npe->regs->action_points[2]);
-	__raw_writel(0, &npe->regs->action_points[3]);
-	__raw_writel(0, &npe->regs->watch_count);
-
-	val = ixp4xx_read_feature_bits();
-	/* reset the NPE */
-	ixp4xx_write_feature_bits(val &
-				  ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	/* deassert reset */
-	ixp4xx_write_feature_bits(val |
-				  (IXP4XX_FEATURE_RESET_NPEA << npe->id));
-	for (i = 0; i < MAX_RETRIES; i++) {
-		if (ixp4xx_read_feature_bits() &
-		    (IXP4XX_FEATURE_RESET_NPEA << npe->id))
-			break;	/* NPE is back alive */
-		udelay(1);
-	}
-	if (i == MAX_RETRIES)
-		return -ETIMEDOUT;
-
-	npe_stop(npe);
-
-	/* restore NPE configuration bus Control Register - parity settings */
-	__raw_writel(ctl, &npe->regs->messaging_control);
-	return 0;
-}
-
-
-int npe_send_message(struct npe *npe, const void *msg, const char *what)
-{
-	const u32 *send = msg;
-	int cycles = 0;
-
-	debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
-		  what, send[0], send[1]);
-
-	if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
-		debug_msg(npe, "NPE input FIFO not empty\n");
-		return -EIO;
-	}
-
-	__raw_writel(send[0], &npe->regs->in_out_fifo);
-
-	if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
-		debug_msg(npe, "NPE input FIFO full\n");
-		return -EIO;
-	}
-
-	__raw_writel(send[1], &npe->regs->in_out_fifo);
-
-	while ((cycles < MAX_RETRIES) &&
-	       (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
-		udelay(1);
-		cycles++;
-	}
-
-	if (cycles == MAX_RETRIES) {
-		debug_msg(npe, "Timeout sending message\n");
-		return -ETIMEDOUT;
-	}
-
-#if DEBUG_MSG > 1
-	debug_msg(npe, "Sending a message took %i cycles\n", cycles);
-#endif
-	return 0;
-}
-
-int npe_recv_message(struct npe *npe, void *msg, const char *what)
-{
-	u32 *recv = msg;
-	int cycles = 0, cnt = 0;
-
-	debug_msg(npe, "Trying to receive message %s\n", what);
-
-	while (cycles < MAX_RETRIES) {
-		if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
-			recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
-			if (cnt == 2)
-				break;
-		} else {
-			udelay(1);
-			cycles++;
-		}
-	}
-
-	switch(cnt) {
-	case 1:
-		debug_msg(npe, "Received [%08X]\n", recv[0]);
-		break;
-	case 2:
-		debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
-		break;
-	}
-
-	if (cycles == MAX_RETRIES) {
-		debug_msg(npe, "Timeout waiting for message\n");
-		return -ETIMEDOUT;
-	}
-
-#if DEBUG_MSG > 1
-	debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
-#endif
-	return 0;
-}
-
-int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
-{
-	int result;
-	u32 *send = msg, recv[2];
-
-	if ((result = npe_send_message(npe, msg, what)) != 0)
-		return result;
-	if ((result = npe_recv_message(npe, recv, what)) != 0)
-		return result;
-
-	if ((recv[0] != send[0]) || (recv[1] != send[1])) {
-		debug_msg(npe, "Message %s: unexpected message received\n",
-			  what);
-		return -EIO;
-	}
-	return 0;
-}
-
-
-int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
-{
-	const struct firmware *fw_entry;
-
-	struct dl_block {
-		u32 type;
-		u32 offset;
-	} *blk;
-
-	struct dl_image {
-		u32 magic;
-		u32 id;
-		u32 size;
-		union {
-			u32 data[0];
-			struct dl_block blocks[0];
-		};
-	} *image;
-
-	struct dl_codeblock {
-		u32 npe_addr;
-		u32 size;
-		u32 data[0];
-	} *cb;
-
-	int i, j, err, data_size, instr_size, blocks, table_end;
-	u32 cmd;
-
-	if ((err = request_firmware(&fw_entry, name, dev)) != 0)
-		return err;
-
-	err = -EINVAL;
-	if (fw_entry->size < sizeof(struct dl_image)) {
-		print_npe(KERN_ERR, npe, "incomplete firmware file\n");
-		goto err;
-	}
-	image = (struct dl_image*)fw_entry->data;
-
-#if DEBUG_FW
-	print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
-		  image->magic, image->id, image->size, image->size * 4);
-#endif
-
-	if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
-		image->id = swab32(image->id);
-		image->size = swab32(image->size);
-	} else if (image->magic != FW_MAGIC) {
-		print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
-			  image->magic);
-		goto err;
-	}
-	if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
-		print_npe(KERN_ERR, npe,
-			  "inconsistent size of firmware file\n");
-		goto err;
-	}
-	if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
-		print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
-		goto err;
-	}
-	if (image->magic == swab32(FW_MAGIC))
-		for (i = 0; i < image->size; i++)
-			image->data[i] = swab32(image->data[i]);
-
-	if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
-		print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
-			  "IXP42x\n");
-		goto err;
-	}
-
-	if (npe_running(npe)) {
-		print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
-			  "already running\n");
-		err = -EBUSY;
-		goto err;
-	}
-#if 0
-	npe_stop(npe);
-	npe_reset(npe);
-#endif
-
-	print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
-		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
-		  (image->id >> 8) & 0xFF, image->id & 0xFF);
-
-	if (cpu_is_ixp42x()) {
-		if (!npe->id)
-			instr_size = NPE_A_42X_INSTR_SIZE;
-		else
-			instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
-		data_size = NPE_42X_DATA_SIZE;
-	} else {
-		instr_size = NPE_46X_INSTR_SIZE;
-		data_size = NPE_46X_DATA_SIZE;
-	}
-
-	for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
-	     blocks++)
-		if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
-			break;
-	if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
-		print_npe(KERN_INFO, npe, "firmware EOF block marker not "
-			  "found\n");
-		goto err;
-	}
-
-#if DEBUG_FW
-	print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
-#endif
-
-	table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
-	for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
-		if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
-		    || blk->offset < table_end) {
-			print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
-				  "firmware block #%i\n", blk->offset, i);
-			goto err;
-		}
-
-		cb = (struct dl_codeblock*)&image->data[blk->offset];
-		if (blk->type == FW_BLOCK_TYPE_INSTR) {
-			if (cb->npe_addr + cb->size > instr_size)
-				goto too_big;
-			cmd = CMD_WR_INS_MEM;
-		} else if (blk->type == FW_BLOCK_TYPE_DATA) {
-			if (cb->npe_addr + cb->size > data_size)
-				goto too_big;
-			cmd = CMD_WR_DATA_MEM;
-		} else {
-			print_npe(KERN_INFO, npe, "invalid firmware block #%i "
-				  "type 0x%X\n", i, blk->type);
-			goto err;
-		}
-		if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
-			print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
-				  "fit in firmware image: type %c, start 0x%X,"
-				  " length 0x%X\n", i,
-				  blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-				  cb->npe_addr, cb->size);
-			goto err;
-		}
-
-		for (j = 0; j < cb->size; j++)
-			npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
-	}
-
-	npe_start(npe);
-	if (!npe_running(npe))
-		print_npe(KERN_ERR, npe, "unable to start\n");
-	release_firmware(fw_entry);
-	return 0;
-
-too_big:
-	print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
-		  "memory: type %c, start 0x%X, length 0x%X\n", i,
-		  blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
-		  cb->npe_addr, cb->size);
-err:
-	release_firmware(fw_entry);
-	return err;
-}
-
-
-struct npe *npe_request(unsigned id)
-{
-	if (id < NPE_COUNT)
-		if (npe_tab[id].valid)
-			if (try_module_get(THIS_MODULE))
-				return &npe_tab[id];
-	return NULL;
-}
-
-void npe_release(struct npe *npe)
-{
-	module_put(THIS_MODULE);
-}
-
-
-static int __init npe_init_module(void)
-{
-
-	int i, found = 0;
-
-	for (i = 0; i < NPE_COUNT; i++) {
-		struct npe *npe = &npe_tab[i];
-		if (!(ixp4xx_read_feature_bits() &
-		      (IXP4XX_FEATURE_RESET_NPEA << i)))
-			continue; /* NPE already disabled or not present */
-		if (!(npe->mem_res = request_mem_region(npe->regs_phys,
-							REGS_SIZE,
-							npe_name(npe)))) {
-			print_npe(KERN_ERR, npe,
-				  "failed to request memory region\n");
-			continue;
-		}
-
-		if (npe_reset(npe))
-			continue;
-		npe->valid = 1;
-		found++;
-	}
-
-	if (!found)
-		return -ENODEV;
-	return 0;
-}
-
-static void __exit npe_cleanup_module(void)
-{
-	int i;
-
-	for (i = 0; i < NPE_COUNT; i++)
-		if (npe_tab[i].mem_res) {
-			npe_reset(&npe_tab[i]);
-			release_resource(npe_tab[i].mem_res);
-		}
-}
-
-module_init(npe_init_module);
-module_exit(npe_cleanup_module);
-
-MODULE_AUTHOR("Krzysztof Halasa");
-MODULE_LICENSE("GPL v2");
-MODULE_FIRMWARE(NPE_A_FIRMWARE);
-MODULE_FIRMWARE(NPE_B_FIRMWARE);
-MODULE_FIRMWARE(NPE_C_FIRMWARE);
-
-EXPORT_SYMBOL(npe_names);
-EXPORT_SYMBOL(npe_running);
-EXPORT_SYMBOL(npe_request);
-EXPORT_SYMBOL(npe_release);
-EXPORT_SYMBOL(npe_load_firmware);
-EXPORT_SYMBOL(npe_send_message);
-EXPORT_SYMBOL(npe_recv_message);
-EXPORT_SYMBOL(npe_send_recv_message);
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
deleted file mode 100644
index 9d1b6b7c394c..000000000000
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * Intel IXP4xx Queue Manager driver for Linux
- *
- * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
-
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <mach/qmgr.h>
-
-static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT;
-static struct resource *mem_res;
-static spinlock_t qmgr_lock;
-static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[QUEUES])(void *pdev);
-static void *irq_pdevs[QUEUES];
-
-#if DEBUG_QMGR
-char qmgr_queue_descs[QUEUES][32];
-#endif
-
-void qmgr_set_irq(unsigned int queue, int src,
-		  void (*handler)(void *pdev), void *pdev)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&qmgr_lock, flags);
-	if (queue < HALF_QUEUES) {
-		u32 __iomem *reg;
-		int bit;
-		BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
-		reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
-		bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
-		__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
-			     reg);
-	} else
-		/* IRQ source for queues 32-63 is fixed */
-		BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
-
-	irq_handlers[queue] = handler;
-	irq_pdevs[queue] = pdev;
-	spin_unlock_irqrestore(&qmgr_lock, flags);
-}
-
-
-static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
-{
-	int i, ret = 0;
-	u32 en_bitmap, src, stat;
-
-	/* ACK - it may clear any bits so don't rely on it */
-	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
-
-	en_bitmap = qmgr_regs->irqen[0];
-	while (en_bitmap) {
-		i = __fls(en_bitmap); /* number of the last "low" queue */
-		en_bitmap &= ~BIT(i);
-		src = qmgr_regs->irqsrc[i >> 3];
-		stat = qmgr_regs->stat1[i >> 3];
-		if (src & 4) /* the IRQ condition is inverted */
-			stat = ~stat;
-		if (stat & BIT(src & 3)) {
-			irq_handlers[i](irq_pdevs[i]);
-			ret = IRQ_HANDLED;
-		}
-	}
-	return ret;
-}
-
-
-static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
-{
-	int i, ret = 0;
-	u32 req_bitmap;
-
-	/* ACK - it may clear any bits so don't rely on it */
-	__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
-
-	req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
-	while (req_bitmap) {
-		i = __fls(req_bitmap); /* number of the last "high" queue */
-		req_bitmap &= ~BIT(i);
-		irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
-		ret = IRQ_HANDLED;
-	}
-	return ret;
-}
-
-
-static irqreturn_t qmgr_irq(int irq, void *pdev)
-{
-	int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
-	u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
-
-	if (!req_bitmap)
-		return 0;
-	__raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
-
-	while (req_bitmap) {
-		i = __fls(req_bitmap); /* number of the last queue */
-		req_bitmap &= ~BIT(i);
-		i += half * HALF_QUEUES;
-		irq_handlers[i](irq_pdevs[i]);
-	}
-	return IRQ_HANDLED;
-}
-
-
-void qmgr_enable_irq(unsigned int queue)
-{
-	unsigned long flags;
-	int half = queue / 32;
-	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
-
-	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
-		     &qmgr_regs->irqen[half]);
-	spin_unlock_irqrestore(&qmgr_lock, flags);
-}
-
-void qmgr_disable_irq(unsigned int queue)
-{
-	unsigned long flags;
-	int half = queue / 32;
-	u32 mask = 1 << (queue & (HALF_QUEUES - 1));
-
-	spin_lock_irqsave(&qmgr_lock, flags);
-	__raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
-		     &qmgr_regs->irqen[half]);
-	__raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
-	spin_unlock_irqrestore(&qmgr_lock, flags);
-}
-
-static inline void shift_mask(u32 *mask)
-{
-	mask[3] = mask[3] << 1 | mask[2] >> 31;
-	mask[2] = mask[2] << 1 | mask[1] >> 31;
-	mask[1] = mask[1] << 1 | mask[0] >> 31;
-	mask[0] <<= 1;
-}
-
-#if DEBUG_QMGR
-int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-		       unsigned int nearly_empty_watermark,
-		       unsigned int nearly_full_watermark,
-		       const char *desc_format, const char* name)
-#else
-int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
-			 unsigned int nearly_empty_watermark,
-			 unsigned int nearly_full_watermark)
-#endif
-{
-	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
-	int err;
-
-	BUG_ON(queue >= QUEUES);
-
-	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
-		return -EINVAL;
-
-	switch (len) {
-	case  16:
-		cfg = 0 << 24;
-		mask[0] = 0x1;
-		break;
-	case  32:
-		cfg = 1 << 24;
-		mask[0] = 0x3;
-		break;
-	case  64:
-		cfg = 2 << 24;
-		mask[0] = 0xF;
-		break;
-	case 128:
-		cfg = 3 << 24;
-		mask[0] = 0xFF;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	cfg |= nearly_empty_watermark << 26;
-	cfg |= nearly_full_watermark << 29;
-	len /= 16;		/* in 16-dwords: 1, 2, 4 or 8 */
-	mask[1] = mask[2] = mask[3] = 0;
-
-	if (!try_module_get(THIS_MODULE))
-		return -ENODEV;
-
-	spin_lock_irq(&qmgr_lock);
-	if (__raw_readl(&qmgr_regs->sram[queue])) {
-		err = -EBUSY;
-		goto err;
-	}
-
-	while (1) {
-		if (!(used_sram_bitmap[0] & mask[0]) &&
-		    !(used_sram_bitmap[1] & mask[1]) &&
-		    !(used_sram_bitmap[2] & mask[2]) &&
-		    !(used_sram_bitmap[3] & mask[3]))
-			break; /* found free space */
-
-		addr++;
-		shift_mask(mask);
-		if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
-			printk(KERN_ERR "qmgr: no free SRAM space for"
-			       " queue %i\n", queue);
-			err = -ENOMEM;
-			goto err;
-		}
-	}
-
-	used_sram_bitmap[0] |= mask[0];
-	used_sram_bitmap[1] |= mask[1];
-	used_sram_bitmap[2] |= mask[2];
-	used_sram_bitmap[3] |= mask[3];
-	__raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
-#if DEBUG_QMGR
-	snprintf(qmgr_queue_descs[queue], sizeof(qmgr_queue_descs[0]),
-		 desc_format, name);
-	printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n",
-	       qmgr_queue_descs[queue], queue, addr);
-#endif
-	spin_unlock_irq(&qmgr_lock);
-	return 0;
-
-err:
-	spin_unlock_irq(&qmgr_lock);
-	module_put(THIS_MODULE);
-	return err;
-}
-
-void qmgr_release_queue(unsigned int queue)
-{
-	u32 cfg, addr, mask[4];
-
-	BUG_ON(queue >= QUEUES); /* not in valid range */
-
-	spin_lock_irq(&qmgr_lock);
-	cfg = __raw_readl(&qmgr_regs->sram[queue]);
-	addr = (cfg >> 14) & 0xFF;
-
-	BUG_ON(!addr);		/* not requested */
-
-	switch ((cfg >> 24) & 3) {
-	case 0: mask[0] = 0x1; break;
-	case 1: mask[0] = 0x3; break;
-	case 2: mask[0] = 0xF; break;
-	case 3: mask[0] = 0xFF; break;
-	}
-
-	mask[1] = mask[2] = mask[3] = 0;
-
-	while (addr--)
-		shift_mask(mask);
-
-#if DEBUG_QMGR
-	printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n",
-	       qmgr_queue_descs[queue], queue);
-	qmgr_queue_descs[queue][0] = '\x0';
-#endif
-
-	while ((addr = qmgr_get_entry(queue)))
-		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
-		       queue, addr);
-
-	__raw_writel(0, &qmgr_regs->sram[queue]);
-
-	used_sram_bitmap[0] &= ~mask[0];
-	used_sram_bitmap[1] &= ~mask[1];
-	used_sram_bitmap[2] &= ~mask[2];
-	used_sram_bitmap[3] &= ~mask[3];
-	irq_handlers[queue] = NULL; /* catch IRQ bugs */
-	spin_unlock_irq(&qmgr_lock);
-
-	module_put(THIS_MODULE);
-}
-
-static int qmgr_init(void)
-{
-	int i, err;
-	irq_handler_t handler1, handler2;
-
-	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
-				     IXP4XX_QMGR_REGION_SIZE,
-				     "IXP4xx Queue Manager");
-	if (mem_res == NULL)
-		return -EBUSY;
-
-	/* reset qmgr registers */
-	for (i = 0; i < 4; i++) {
-		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
-		__raw_writel(0, &qmgr_regs->irqsrc[i]);
-	}
-	for (i = 0; i < 2; i++) {
-		__raw_writel(0, &qmgr_regs->stat2[i]);
-		__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
-		__raw_writel(0, &qmgr_regs->irqen[i]);
-	}
-
-	__raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
-	__raw_writel(0, &qmgr_regs->statf_h);
-
-	for (i = 0; i < QUEUES; i++)
-		__raw_writel(0, &qmgr_regs->sram[i]);
-
-	if (cpu_is_ixp42x_rev_a0()) {
-		handler1 = qmgr_irq1_a0;
-		handler2 = qmgr_irq2_a0;
-	} else
-		handler1 = handler2 = qmgr_irq;
-
-	err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
-			  NULL);
-	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
-		       IRQ_IXP4XX_QM1, err);
-		goto error_irq;
-	}
-
-	err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
-			  NULL);
-	if (err) {
-		printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
-		       IRQ_IXP4XX_QM2, err);
-		goto error_irq2;
-	}
-
-	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
-	spin_lock_init(&qmgr_lock);
-
-	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
-	return 0;
-
-error_irq2:
-	free_irq(IRQ_IXP4XX_QM1, NULL);
-error_irq:
-	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-	return err;
-}
-
-static void qmgr_remove(void)
-{
-	free_irq(IRQ_IXP4XX_QM1, NULL);
-	free_irq(IRQ_IXP4XX_QM2, NULL);
-	synchronize_irq(IRQ_IXP4XX_QM1);
-	synchronize_irq(IRQ_IXP4XX_QM2);
-	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
-}
-
-module_init(qmgr_init);
-module_exit(qmgr_remove);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Krzysztof Halasa");
-
-EXPORT_SYMBOL(qmgr_set_irq);
-EXPORT_SYMBOL(qmgr_enable_irq);
-EXPORT_SYMBOL(qmgr_disable_irq);
-#if DEBUG_QMGR
-EXPORT_SYMBOL(qmgr_queue_descs);
-EXPORT_SYMBOL(qmgr_request_queue);
-#else
-EXPORT_SYMBOL(__qmgr_request_queue);
-#endif
-EXPORT_SYMBOL(qmgr_release_queue);
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index 8f0eba0a6800..925ef805f966 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -21,6 +21,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		3
 #define IRQ_LINES	3
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 4138d6aa4c52..c142cfa8c5d6 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -34,6 +34,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 #define NAS100D_SDA_PIN		5
 #define NAS100D_SCL_PIN		6
 
@@ -279,9 +281,6 @@ static void __init nas100d_init(void)
 
 	ixp4xx_sys_init();
 
-	/* gpio 14 and 15 are _not_ clocks */
-	*IXP4XX_GPIO_GPCLKR = 0;
-
 	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	nas100d_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 032defe111aa..d69ee4066d20 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -21,6 +21,8 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#include "irqs.h"
+
 #define MAX_DEV		3
 #define IRQ_LINES	3
 
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 341b263482ef..ee1877fcfafe 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -32,6 +32,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 
+#include "irqs.h"
+
 #define NSLU2_SDA_PIN		7
 #define NSLU2_SCL_PIN		6
 
@@ -125,10 +127,18 @@ static struct platform_device nslu2_i2c_gpio = {
 	},
 };
 
+static struct resource nslu2_beeper_resources[] = {
+	{
+		.start	= IRQ_IXP4XX_TIMER2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device nslu2_beeper = {
 	.name			= "ixp4xx-beeper",
 	.id			= NSLU2_GPIO_BUZZ,
-	.num_resources		= 0,
+	.resource		= nslu2_beeper_resources,
+	.num_resources		= ARRAY_SIZE(nslu2_beeper_resources),
 };
 
 static struct resource nslu2_uart_resources[] = {
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index c92e5b82af36..cf83f7e24179 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -27,6 +27,8 @@
 
 #include <asm/mach/pci.h>
 
+#include "irqs.h"
+
 void __init wg302v2_pci_preinit(void)
 {
 	irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 90b3c604e8b6..8711e299229b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -29,6 +29,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#include "irqs.h"
+
 static struct flash_platform_data wg302v2_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,